This patch addresses inconsistencies in the annotations for the
following functions:
- **dc_get_power_profile_for_dc_state**: Standardized parameter and
return value annotations.
- **dc_get_det_buffer_size_from_state**: Clarified parameter
documentation for better understanding.
- **dc_get_host_router_index**: Corrected parameter descriptions to
follow documentation conventions.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:6386: warning: Cannot understand ***************
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement soft reset engine callback for SDMA 4.4.x IPs. This avoids IP
version check in generic implementation.
V2: Correct physical instance ID calculation in soft_reset_engine (Jesse)
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Simplify SDMA v4_4_2 queue reset and stop operations by:
1. Removing GET_INST(SDMA0) conversion for ring->me
2. Using the logical instance ID (ring->me) directly
3. Maintaining consistent behavior with other SDMA queue operations
This change aligns with the existing queue handling logic where
ring->me already represents the correct instance identifier.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit makes the following improvements to SDMA engine reset handling:
1. Clarifies in the function documentation that instance_id refers to a logical ID
2. Adds conversion from logical to physical instance ID before performing reset
using GET_INST(SDMA0, instance_id) macro
3. Improves error messaging to indicate when a logical instance reset fails
4. Adds better code organization with blank lines for readability
The change ensures proper SDMA engine reset by using the correct physical
instance ID while maintaining the logical ID interface for callers.
V2: Remove harvest_config check and convert directly to physical instance (Lijo)
Suggested-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On multi-aid SOCs, there could be a continuous stream of interrupts from
GC after poison consumption. Suspend IH to disable them before doing
mode-2 reset. This avoids conflicts in hardware accesses during
interrupt handlers while a reset is ongoing.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When the suspend sequence has been aborted after prepare() but
before suspend() the resume() callback never gets called. The PM core
will call complete() when this happens. As the state has been cached
in prepare() it needs to be destroyed in complete() if it's still around.
[How]
Create a helper for destroying cached state and call it both in resume()
and complete() callbacks. If resume has been called the state will be
destroyed and it's a no-op for complete(). If resume hasn't been called
(such as an aborted suspend) then destroy the state in complete().
Fixes: 50e0bae34f ("drm/amd/display: Add and use new dm_prepare_suspend() callback")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Link: https://lore.kernel.org/r/20250602014432.3538345-4-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SMU v13.0.6 SOCs, always show default clock levels for gfx in
pp_dpm_sclk. Any custom min/max levels set by user will be available in
pp_od_clk_voltage
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add debug mask to disable kernel logs of RAS correctable errors,
including both ACA and CE error counter kernel messages.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Once RAS errors are cleared with appropriate recovery mechanism, clear
reset flags also from RAS context. Otherwise, stale flag values could
affect the subsequent RAS reset handling on the device.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It doesn't work reliably and we have soft recover and
full adapter reset so drop this.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It doesn't work reliably and we have soft recover and
full adapter reset so drop this.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It doesn't work reliably and we have soft recover and
full adapter reset so drop this.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The KFD currently bars a compute partition mode switch while a KFD
process exists.
Since cgroup excluded devices remain excluded for the lifetime of a KFD
process and user space is able to mode switch single devices, allow
users to mode switch a device with any running process that has been
cgroup excluded from this device.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Harish Kasiviswanathan <harish.kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fix kernel docs for new struct members
- Export full brightness range to userspace
- Only read ACPI backlight caps once
- Fix RMCM programming seq errors
- Add RMCM debug logging
- DML2.1 changes
- Fix mpv playback corruption on weston
- Adjust dto fix coverage
- Add option to disable PHY SSC reduction on transmitter enable
- Don't disable dtb as dto src during dpms off
- Add custom segmentation support
- Deprecate Loading Bounding Box From DMUB On DCN4
- Update tmz_surface type to match register
- Clear DPP 3DLUT Cap
- Add more checks for DSC / HUBP ONO guarantees
- Refactor DML2 DC power instance
- Remove dml/dcn401 files and references
- Get LTTPR IEEE OUI/Device ID From Closest LTTPR To Host
- Add HW change required mpc gamut remap
- Add DPIA debug option for zero allocation patch
- Add dc cap for dp tunneling
- Remove dpia debug bits
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
Add kernel-doc for new struct members for lut3d_caps and mpc_funcs.
This fixes the follow warnings from "make htmldocs".
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:1106: warning: Function
parameter or struct member 'mcm' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:1106: warning: Function
parameter or struct member 'rmcm' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/dc.h:249: warning: Function parameter
or struct member 'mcm_3d_lut_caps' not described in 'mpc_color_caps'
./drivers/gpu/drm/amd/display/dc/dc.h:249: warning: Function parameter
or struct member 'rmcm_3d_lut_caps' not described in 'mpc_color_caps'
./drivers/gpu/drm/amd/display/dc/dc.h:249: warning: Function parameter
or struct member 'preblend' not described in 'mpc_color_caps'
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Userspace currently is offered a range from 0-0xFF but the PWM is
programmed from 0-0xFFFF. This can be limiting to some software
that wants to apply greater granularity.
[HOW]
Convert internally to firmware values only when mapping custom
brightness curves because these are in 0-0xFF range. Advertise full
PWM range to userspace.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Adjusting otg dto programming in this path is unsafe otg may be en at
this time, swapping its src sel for example was discovered to cause
visual artifacts and was moved to dcn31_program_pix_clk (where otg is
guaranteed off) but dto functional clk enable bit is not cleared.
dcn31_program_pix_clk is called during dpms on, so until that point
we will have a otg with functional src sel set (Sel DTBclk) and that
functional clk dto en is unset (i.e DTB DTO EN), which is invalid and tg
will not function and system will hang on something such as flip
incoming from OS during dpms off. will scope out dcn315 as it was
affecting diags tests on certain CI machines (not crbs)
Reviewed-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Add support for uneven segmentation size
[HOW]
Currently width + x_start is automatically calculated using
slice index + dividing stream into equally sized segments.
Add override variables for dst_rect width and x
Reviewed-by: Samson Tam <samson.tam@amd.com>
Signed-off-by: Brendan Steve Leder <BrendanSteve.Leder@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
dml2_soc_bb struct can continuously receive updates for future ASICs.
Alignment issues may arise since VBIOS DMCUB contains an older version of
the SOC BB.
Populating the bounding box with values from DMCUB is no longer necessary
since values such as UCLK will be overridden by values acquired by PMFW
anyways.
[HOW]
Use bb_from_dmub to store DCN specific bounding box parameters in DMCUB.
Add helpers to translate DCN specific struct to the corresponding
dml2_soc_bb field.
To avoid alignment issues:
Deprecate applying DMCUB SoC BB for DCN4
For future projects:
Create a flattened struct containing all sensitive parameters in the
bounding box. New parameters can be added to the bottom of the new struct
as needed.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
For non-zero DSC instances it's possible that the HUBP domain required
to drive it for sequential ONO ASICs isn't met, potentially causing
the logic to the tile to enter an undefined state leading to a system
hang.
[HOW]
Add more checks to ensure that the HUBP domain matching the DSC instance
is appropriately powered.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
These fields are read for the explicit purpose of detecting embedded LTTPRs
(i.e. between host ASIC and the user-facing port), and thus need to
calculate the correct DPCD address offset based on LTTPR count to target
the appropriate LTTPR's DPCD register space with these queries.
[HOW]
Cascaded LTTPRs in a link each snoop and increment LTTPR count when queried
via DPCD read, so an LTTPR embedded in a source device (e.g. USB4 port on a
laptop) will always be addressible using the max LTTPR count seen by the
host. Therefore we simply need to use a recently added helper function to
calculate the correct DPCD address to target potentially embedded LTTPRs
based on the received LTTPR count.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clear pa and mca record counter when resetting eeprom, so that
ras_num_bad_pages can be calculated correctly
Signed-off-by: ganglxie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
IH is not working after switching a new gpu index for the first time.
During VM resume, QEMU programming of VF MSIX table (register GFXMSIX_VECT0_ADDR_LO)
may not work.The access could be blocked by nBIF protection as VF isn't in
exclusive access mode. Exclusive access is enabled now, disable/enable MSIX
so that QEMU reprograms MSIX table.
call amdgpu_restore_msix on resume to restore msix table.
Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When switching to new GPU index after hibernation and then resume,
VRAM offset of each VRAM BO will be changed, and the cached gpu
addresses needed to updated.
This is to enable pdb0 and switch to use pdb0-based virtual gpu
address by default in amdgpu_bo_create_reserved(). since the virtual
addresses do not change, this can avoid the need to update all
cached gpu addresses all over the codebase.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add amdgpu_bo_fb_aper_addr() and update the cached GPU addresses to use
the FB aperture address for SMU and PSP.
2 reasons for this change:
1. when pdb0 is enabled, gpu addr from amdgpu_bo_create_kernel() is GART
aperture address, it is not compatible with SMU and PSP, it need to be
updated to use FB aperture address.
2. Since FB aperture address will change after switching to new GPU
index after hibernation, it need to be updated on resume.
Signed-off-by: Jiang Liu <gerry@linux.alibaba.com>
Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sonny Jiang