Add samples of APX and other new instructions to the 'x86 instruction
decoder - new instructions' test.
Note the test is only available if the perf tool has been built with
EXTRA_TESTS=1.
Example:
$ make EXTRA_TESTS=1 -C tools/perf
$ tools/perf/perf test -F -v 'new ins' |& grep -i 'jmpabs\|popp\|pushp'
Decoded ok: d5 00 a1 ef cd ab 90 78 56 34 12 jmpabs $0x1234567890abcdef
Decoded ok: d5 08 53 pushp %rbx
Decoded ok: d5 18 50 pushp %r16
Decoded ok: d5 19 57 pushp %r31
Decoded ok: d5 19 5f popp %r31
Decoded ok: d5 18 58 popp %r16
Decoded ok: d5 08 5b popp %rbx
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Nikolay Borisov <nik.borisov@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: x86@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240502105853.5338-11-adrian.hunter@intel.com
JMPABS is 64-bit absolute direct jump instruction, encoded with a mandatory
REX2 prefix. JMPABS is designed to be used in the procedure linkage table
(PLT) to replace indirect jumps, because it has better performance. In that
case the jump target will be amended at run time. To enable Intel PT to
follow the code, a TIP packet is always emitted when JMPABS is traced under
Intel PT.
Refer to the Intel Advanced Performance Extensions (Intel APX) Architecture
Specification for details.
Decode JMPABS as an indirect jump, because it has an associated TIP packet
the same as an indirect jump and the control flow should follow the TIP
packet payload, and not assume it is the same as the on-file object code
JMPABS target address.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Nikolay Borisov <nik.borisov@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: x86@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240502105853.5338-10-adrian.hunter@intel.com
Test "perf probe of function from different CU" only checks if the perf
command has failed and doesn't test the --funcs output. In the issue
reported in the previous commit, the garbage output of the --funcs
command was being ignored by the test when it could have been caught.
The script first makes use of --funcs option with the perf probe command
to check if the function "foo" exists in the testfile before adding a
probe to it in the next command. The output of probe...--funcs command
is redirected to stdout, therefore, add '| grep "foo"' to validate the
result.
Signed-off-by: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: anshuman.khandual@arm.com
Cc: james.clark@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240601125946.1741414-11-ChaitanyaS.Prakash@arm.com
perf test "perf script tests" fails as below in systems
with python 3.6
File "/home/athira/linux/tools/perf/tests/shell/../../scripts/python/parallel-perf.py", line 442
if line := p.stdout.readline():
^
SyntaxError: invalid syntax
--- Cleaning up ---
---- end(-1) ----
92: perf script tests: FAILED!
This happens because ":=" is a new syntax that assigns values
to variables as part of a larger expression. This is introduced
from python 3.8 and hence fails in setup with python 3.6
Address this by splitting the large expression and check the
value in two steps:
Previous line: if line := p.stdout.readline():
Current change:
line = p.stdout.readline()
if line:
With patch
./perf test "perf script tests"
93: perf script tests: Ok
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: akanksha@linux.ibm.com
Cc: kjain@linux.ibm.com
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240623064850.83720-3-atrajeev@linux.vnet.ibm.com
Perf test for perf probe of function from different CU fails
as below:
./perf test -vv "test perf probe of function from different CU"
116: test perf probe of function from different CU:
--- start ---
test child forked, pid 2679
Failed to find symbol foo in /tmp/perf-uprobe-different-cu-sh.Msa7iy89bx/testfile
Error: Failed to add events.
--- Cleaning up ---
"foo" does not hit any event.
Error: Failed to delete events.
---- end(-1) ----
116: test perf probe of function from different CU : FAILED!
The test does below to probe function "foo" :
# gcc -g -Og -flto -c /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-foo.c
-o /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-foo.o
# gcc -g -Og -c /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-main.c
-o /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-main.o
# gcc -g -Og -o /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile
/tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-foo.o
/tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile-main.o
# ./perf probe -x /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile foo
Failed to find symbol foo in /tmp/perf-uprobe-different-cu-sh.XniNxNEVT7/testfile
Error: Failed to add events.
Perf probe fails to find symbol foo in the executable placed in
/tmp/perf-uprobe-different-cu-sh.XniNxNEVT7
Simple reproduce:
# mktemp -d /tmp/perf-checkXXXXXXXXXX
/tmp/perf-checkcWpuLRQI8j
# gcc -g -o test test.c
# cp test /tmp/perf-checkcWpuLRQI8j/
# nm /tmp/perf-checkcWpuLRQI8j/test | grep foo
00000000100006bc T foo
# ./perf probe -x /tmp/perf-checkcWpuLRQI8j/test foo
Failed to find symbol foo in /tmp/perf-checkcWpuLRQI8j/test
Error: Failed to add events.
But it works with any files like /tmp/perf/test. Only for
patterns with "/tmp/perf-", this fails.
Further debugging, commit 80d496be89 ("perf report: Add support
for profiling JIT generated code") added support for profiling JIT
generated code. This patch handles dso's of form
"/tmp/perf-$PID.map" .
The check used "if (strncmp(self->name, "/tmp/perf-", 10) == 0)"
to match "/tmp/perf-$PID.map". With this commit, any dso in
/tmp/perf- folder will be considered separately for processing
(not only JIT created map files ). Fix this by changing the
string pattern to check for "/tmp/perf-%d.map". Add a helper
function is_perf_pid_map_name to do this check. In "struct dso",
dso->long_name holds the long name of the dso file. Since the
/tmp/perf-$PID.map check uses the complete name, use dso___long_name for
the string name.
With the fix,
# ./perf test "test perf probe of function from different CU"
117: test perf probe of function from different CU : Ok
Fixes: 56cbeacf14 ("perf probe: Add test for regression introduced by switch to die_get_decl_file()")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: akanksha@linux.ibm.com
Cc: kjain@linux.ibm.com
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240623064850.83720-1-atrajeev@linux.vnet.ibm.com
The 2 second sleep can cause the test to fail on very slow network file
systems because Perf ends up being killed before it finishes starting
up.
Fix it by making the leafloop workload end after a fixed time like the
other workloads so there is no need to kill it after 2 seconds.
Also remove the 1 second start sampling delay because it is similarly
fragile. Instead, search through all samples for a matching one, rather
than just checking the first sample and hoping it's in the right place.
Fixes: cd6382d827 ("perf test arm64: Test unwinding using fame-pointer (fp) mode")
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: German Gomez <german.gomez@arm.com>
Cc: Spoorthy S <spoorts2@in.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240612140316.3006660-1-james.clark@arm.com
Needed to add required include directories for the feature detection
to succeed. The header tracefs.h is installed either into the include
directory /usr/include/tracefs/tracefs.h when using the Makefile, or
into /usr/include/libtracefs/tracefs.h when using meson to build
libtracefs. The header tracefs.h uses #include <event-parse.h> from
libtraceevent, so pkg-config needs to pick the correct include directory
for libtracefs and add the one for libtraceevent to succeed.
Note that in baa2ca59ec the variable
LIBTRACEEVENT_DIR was introduced, and now the method to compile against
non-standard locations requires PKG_CONFIG_PATH to be set instead, which
works for both libtraceevent and libtracefs.
Signed-off-by: Guilherme Amadio <amadio@gentoo.org>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240606153625.2255470-2-amadio@gentoo.org
The hard-coded metrics is wrongly calculated on the hybrid machine.
$ perf stat -e cycles,instructions -a sleep 1
Performance counter stats for 'system wide':
18,205,487 cpu_atom/cycles/
9,733,603 cpu_core/cycles/
9,423,111 cpu_atom/instructions/ # 0.52 insn per cycle
4,268,965 cpu_core/instructions/ # 0.23 insn per cycle
The insn per cycle for cpu_core should be 4,268,965 / 9,733,603 = 0.44.
When finding the metric events, the find_stat() doesn't take the PMU
type into account. The cpu_atom/cycles/ is wrongly used to calculate
the IPC of the cpu_core.
In the hard-coded metrics, the events from a different PMU are only
SW_CPU_CLOCK and SW_TASK_CLOCK. They both have the stat type,
STAT_NSECS. Except the SW CLOCK events, check the PMU type as well.
Fixes: 0a57b91080 ("perf stat: Use counts rather than saved_value")
Reported-by: Khalil, Amiri <amiri.khalil@intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240606180316.4122904-1-kan.liang@linux.intel.com
Running "perftool-testsuite_probe" fails as below:
./perf test -v "perftool-testsuite_probe"
83: perftool-testsuite_probe : FAILED
There are three fails:
1. Regexp not found: "\s*probe:inode_permission(?:_\d+)?\s+\(on inode_permission(?:[:\+][0-9A-Fa-f]+)?@.+\)"
-- [ FAIL ] -- perf_probe :: test_adding_kernel :: listing added probe :: perf probe -l (output regexp parsing)
2. Regexp not found: "probe:vfs_mknod"
Regexp not found: "probe:vfs_create"
Regexp not found: "probe:vfs_rmdir"
Regexp not found: "probe:vfs_link"
Regexp not found: "probe:vfs_write"
-- [ FAIL ] -- perf_probe :: test_adding_kernel :: wildcard adding support (command exitcode + output regexp parsing)
3. Regexp not found: "Failed to find"
Regexp not found: "somenonexistingrandomstuffwhichisalsoprettylongorevenlongertoexceed64"
Regexp not found: "in this function|at this address"
Line did not match any pattern: "The /boot/vmlinux file has no debug information."
Line did not match any pattern: "Rebuild with CONFIG_DEBUG_INFO=y, or install an appropriate debuginfo package."
These three tests depends on kernel debug info.
1. Fail 1 expects file name along with probe which needs debuginfo
2. Fail 2 :
perf probe -nf --max-probes=512 -a 'vfs_* $params'
Debuginfo-analysis is not supported.
Error: Failed to add events.
3. Fail 3 :
perf probe 'vfs_read somenonexistingrandomstuffwhichisalsoprettylongorevenlongertoexceed64'
Debuginfo-analysis is not supported.
Error: Failed to add events.
There is already helper function skip_if_no_debuginfo in
lib/probe_vfs_getname.sh which does perf probe and returns
"2" if debug info is not present. Use the skip_if_no_debuginfo
function and skip only the three tests which needs debuginfo
based on the result.
With the patch:
83: perftool-testsuite_probe:
--- start ---
test child forked, pid 3927
-- [ PASS ] -- perf_probe :: test_adding_kernel :: adding probe inode_permission ::
-- [ PASS ] -- perf_probe :: test_adding_kernel :: adding probe inode_permission :: -a
-- [ PASS ] -- perf_probe :: test_adding_kernel :: adding probe inode_permission :: --add
-- [ PASS ] -- perf_probe :: test_adding_kernel :: listing added probe :: perf list
Regexp not found: "\s*probe:inode_permission(?:_\d+)?\s+\(on inode_permission(?:[:\+][0-9A-Fa-f]+)?@.+\)"
-- [ SKIP ] -- perf_probe :: test_adding_kernel :: 2 2 Skipped due to missing debuginfo :: testcase skipped
-- [ PASS ] -- perf_probe :: test_adding_kernel :: using added probe
-- [ PASS ] -- perf_probe :: test_adding_kernel :: deleting added probe
-- [ PASS ] -- perf_probe :: test_adding_kernel :: listing removed probe (should NOT be listed)
-- [ PASS ] -- perf_probe :: test_adding_kernel :: dry run :: adding probe
-- [ PASS ] -- perf_probe :: test_adding_kernel :: force-adding probes :: first probe adding
-- [ PASS ] -- perf_probe :: test_adding_kernel :: force-adding probes :: second probe adding (without force)
-- [ PASS ] -- perf_probe :: test_adding_kernel :: force-adding probes :: second probe adding (with force)
-- [ PASS ] -- perf_probe :: test_adding_kernel :: using doubled probe
-- [ PASS ] -- perf_probe :: test_adding_kernel :: removing multiple probes
Regexp not found: "probe:vfs_mknod"
Regexp not found: "probe:vfs_create"
Regexp not found: "probe:vfs_rmdir"
Regexp not found: "probe:vfs_link"
Regexp not found: "probe:vfs_write"
-- [ SKIP ] -- perf_probe :: test_adding_kernel :: 2 2 Skipped due to missing debuginfo :: testcase skipped
Regexp not found: "Failed to find"
Regexp not found: "somenonexistingrandomstuffwhichisalsoprettylongorevenlongertoexceed64"
Regexp not found: "in this function|at this address"
Line did not match any pattern: "The /boot/vmlinux file has no debug information."
Line did not match any pattern: "Rebuild with CONFIG_DEBUG_INFO=y, or install an appropriate debuginfo package."
-- [ SKIP ] -- perf_probe :: test_adding_kernel :: 2 2 Skipped due to missing debuginfo :: testcase skipped
-- [ PASS ] -- perf_probe :: test_adding_kernel :: function with retval :: add
-- [ PASS ] -- perf_probe :: test_adding_kernel :: function with retval :: record
-- [ PASS ] -- perf_probe :: test_adding_kernel :: function argument probing :: script
## [ PASS ] ## perf_probe :: test_adding_kernel SUMMARY
---- end(0) ----
83: perftool-testsuite_probe : Ok
Only the three specific tests are skipped and remaining
ran successfully.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: akanksha@linux.ibm.com
Cc: kjain@linux.ibm.com
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240617122121.7484-1-atrajeev@linux.vnet.ibm.com
Adrian Hunter