[ Upstream commit 28be7ca4fc ]
The trial period exists until jiffies is after addr_trial_end. But as
jiffies will eventually overflow, just using time_after will eventually
give incorrect results. As the node address is set once the trial period
ends, this can be used to know that we are not in the trial period.
Fixes: e415577f57 ("tipc: correct discovery message handling during address trial period")
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6ec01da40 ]
If there is no user space consumer of extlog_mem trace records, then
Linux properly handles multiple error records in an ELOG block
extlog_print()
print_extlog_rcd()
__print_extlog_rcd()
cper_estatus_print()
apei_estatus_for_each_section()
But the other code path hard codes looking for a single record to
output a trace record.
Fix by using the same apei_estatus_for_each_section() iterator
to step over all records.
Fixes: 2dfb7d51a6 ("trace, RAS: Add eMCA trace event interface")
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae71ab585c ]
This is a revert of commit fd5894fa24 ("drm/vc4: hdmi: Remove clock
rate initialization"), with the code slightly moved around.
It turns out that we can't downright remove that code from the driver,
since the Pi0-3 and Pi4 are in different cases, and it only works for
the Pi4.
Indeed, the commit mentioned above was relying on the RaspberryPi
firmware clocks driver to initialize the rate if it wasn't done by the
firmware. However, the Pi0-3 are using the clk-bcm2835 clock driver that
wasn't doing this initialization. We therefore end up with the clock not
being assigned a rate, and the CPU stalling when trying to access a
register.
We can't move that initialization in the clk-bcm2835 driver, since the
HSM clock we depend on is actually part of the HDMI power domain, so any
rate setup is only valid when the power domain is enabled. Thus, we
reinstated the minimum rate setup at runtime_suspend, which should
address both issues.
Link: https://lore.kernel.org/dri-devel/20220922145448.w3xfywkn5ecak2et@pengutronix.de/
Fixes: fd5894fa24 ("drm/vc4: hdmi: Remove clock rate initialization")
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220929-rpi-pi3-unplugged-fixes-v1-1-cd22e962296c@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1c0b7de4d ]
The VC4 HDMI controller driver relies on the HDMI codec ASoC driver. In
order to set it up properly, in vc4_hdmi_audio_init(), our HDMI driver
will register a device matching the HDMI codec driver, and then register
an ASoC card using that codec.
However, if vc4 is compiled as a module, chances are that the hdmi-codec
driver will be too. In such a case, the module loader will have a very
narrow window to load the module between the device registration and the
card registration.
If it fails to load the module in time, the card registration will fail
with EPROBE_DEFER, and we'll abort the audio initialisation,
unregistering the HDMI codec device in the process.
The next time the bind callback will be run, it's likely that we end up
missing that window again, effectively preventing vc4 to probe entirely.
In order to prevent this, we can create a soft dependency of the vc4
driver on the HDMI codec one so that we're sure the HDMI codec will be
loaded before the VC4 module is, and thus we'll never end up in the
previous situation.
Fixes: 91e99e1139 ("drm/vc4: hdmi: Register HDMI codec")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220902144111.3424560-1-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 943553ef9b ]
During backref walking, when processing a delayed reference with a type of
BTRFS_TREE_BLOCK_REF_KEY, we have two bugs there:
1) We are accessing the delayed references extent_op, and its key, without
the protection of the delayed ref head's lock;
2) If there's no extent op for the delayed ref head, we end up with an
uninitialized key in the stack, variable 'tmp_op_key', and then pass
it to add_indirect_ref(), which adds the reference to the indirect
refs rb tree.
This is wrong, because indirect references should have a NULL key
when we don't have access to the key, and in that case they should be
added to the indirect_missing_keys rb tree and not to the indirect rb
tree.
This means that if have BTRFS_TREE_BLOCK_REF_KEY delayed ref resulting
from freeing an extent buffer, therefore with a count of -1, it will
not cancel out the corresponding reference we have in the extent tree
(with a count of 1), since both references end up in different rb
trees.
When using fiemap, where we often need to check if extents are shared
through shared subtrees resulting from snapshots, it means we can
incorrectly report an extent as shared when it's no longer shared.
However this is temporary because after the transaction is committed
the extent is no longer reported as shared, as running the delayed
reference results in deleting the tree block reference from the extent
tree.
Outside the fiemap context, the result is unpredictable, as the key was
not initialized but it's used when navigating the rb trees to insert
and search for references (prelim_ref_compare()), and we expect all
references in the indirect rb tree to have valid keys.
The following reproducer triggers the second bug:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdj
MNT=/mnt/sdj
mkfs.btrfs -f $DEV
mount -o compress $DEV $MNT
# With a compressed 128M file we get a tree height of 2 (level 1 root).
xfs_io -f -c "pwrite -b 1M 0 128M" $MNT/foo
btrfs subvolume snapshot $MNT $MNT/snap
# Fiemap should output 0x2008 in the flags column.
# 0x2000 means shared extent
# 0x8 means encoded extent (because it's compressed)
echo
echo "fiemap after snapshot, range [120M, 120M + 128K):"
xfs_io -c "fiemap -v 120M 128K" $MNT/foo
echo
# Overwrite one extent and fsync to flush delalloc and COW a new path
# in the snapshot's tree.
#
# After this we have a BTRFS_DROP_DELAYED_REF delayed ref of type
# BTRFS_TREE_BLOCK_REF_KEY with a count of -1 for every COWed extent
# buffer in the path.
#
# In the extent tree we have inline references of type
# BTRFS_TREE_BLOCK_REF_KEY, with a count of 1, for the same extent
# buffers, so they should cancel each other, and the extent buffers in
# the fs tree should no longer be considered as shared.
#
echo "Overwriting file range [120M, 120M + 128K)..."
xfs_io -c "pwrite -b 128K 120M 128K" $MNT/snap/foo
xfs_io -c "fsync" $MNT/snap/foo
# Fiemap should output 0x8 in the flags column. The extent in the range
# [120M, 120M + 128K) is no longer shared, it's now exclusive to the fs
# tree.
echo
echo "fiemap after overwrite range [120M, 120M + 128K):"
xfs_io -c "fiemap -v 120M 128K" $MNT/foo
echo
umount $MNT
Running it before this patch:
$ ./test.sh
(...)
wrote 134217728/134217728 bytes at offset 0
128 MiB, 128 ops; 0.1152 sec (1.085 GiB/sec and 1110.5809 ops/sec)
Create a snapshot of '/mnt/sdj' in '/mnt/sdj/snap'
fiemap after snapshot, range [120M, 120M + 128K):
/mnt/sdj/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [245760..246015]: 34304..34559 256 0x2008
Overwriting file range [120M, 120M + 128K)...
wrote 131072/131072 bytes at offset 125829120
128 KiB, 1 ops; 0.0001 sec (683.060 MiB/sec and 5464.4809 ops/sec)
fiemap after overwrite range [120M, 120M + 128K):
/mnt/sdj/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [245760..246015]: 34304..34559 256 0x2008
The extent in the range [120M, 120M + 128K) is still reported as shared
(0x2000 bit set) after overwriting that range and flushing delalloc, which
is not correct - an entire path was COWed in the snapshot's tree and the
extent is now only referenced by the original fs tree.
Running it after this patch:
$ ./test.sh
(...)
wrote 134217728/134217728 bytes at offset 0
128 MiB, 128 ops; 0.1198 sec (1.043 GiB/sec and 1068.2067 ops/sec)
Create a snapshot of '/mnt/sdj' in '/mnt/sdj/snap'
fiemap after snapshot, range [120M, 120M + 128K):
/mnt/sdj/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [245760..246015]: 34304..34559 256 0x2008
Overwriting file range [120M, 120M + 128K)...
wrote 131072/131072 bytes at offset 125829120
128 KiB, 1 ops; 0.0001 sec (694.444 MiB/sec and 5555.5556 ops/sec)
fiemap after overwrite range [120M, 120M + 128K):
/mnt/sdj/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [245760..246015]: 34304..34559 256 0x8
Now the extent is not reported as shared anymore.
So fix this by passing a NULL key pointer to add_indirect_ref() when
processing a delayed reference for a tree block if there's no extent op
for our delayed ref head with a defined key. Also access the extent op
only after locking the delayed ref head's lock.
The reproducer will be converted later to a test case for fstests.
Fixes: 86d5f99442 ("btrfs: convert prelimary reference tracking to use rbtrees")
Fixes: a6dbceafb9 ("btrfs: Remove unused op_key var from add_delayed_refs")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4fc7b57228 ]
When processing delayed data references during backref walking and we are
using a share context (we are being called through fiemap), whenever we
find a delayed data reference for an inode different from the one we are
interested in, then we immediately exit and consider the data extent as
shared. This is wrong, because:
1) This might be a DROP reference that will cancel out a reference in the
extent tree;
2) Even if it's an ADD reference, it may be followed by a DROP reference
that cancels it out.
In either case we should not exit immediately.
Fix this by never exiting when we find a delayed data reference for
another inode - instead add the reference and if it does not cancel out
other delayed reference, we will exit early when we call
extent_is_shared() after processing all delayed references. If we find
a drop reference, then signal the code that processes references from
the extent tree (add_inline_refs() and add_keyed_refs()) to not exit
immediately if it finds there a reference for another inode, since we
have delayed drop references that may cancel it out. In this later case
we exit once we don't have references in the rb trees that cancel out
each other and have two references for different inodes.
Example reproducer for case 1):
$ cat test-1.sh
#!/bin/bash
DEV=/dev/sdj
MNT=/mnt/sdj
mkfs.btrfs -f $DEV
mount $DEV $MNT
xfs_io -f -c "pwrite 0 64K" $MNT/foo
cp --reflink=always $MNT/foo $MNT/bar
echo
echo "fiemap after cloning:"
xfs_io -c "fiemap -v" $MNT/foo
rm -f $MNT/bar
echo
echo "fiemap after removing file bar:"
xfs_io -c "fiemap -v" $MNT/foo
umount $MNT
Running it before this patch, the extent is still listed as shared, it has
the flag 0x2000 (FIEMAP_EXTENT_SHARED) set:
$ ./test-1.sh
fiemap after cloning:
/mnt/sdj/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..127]: 26624..26751 128 0x2001
fiemap after removing file bar:
/mnt/sdj/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..127]: 26624..26751 128 0x2001
Example reproducer for case 2):
$ cat test-2.sh
#!/bin/bash
DEV=/dev/sdj
MNT=/mnt/sdj
mkfs.btrfs -f $DEV
mount $DEV $MNT
xfs_io -f -c "pwrite 0 64K" $MNT/foo
cp --reflink=always $MNT/foo $MNT/bar
# Flush delayed references to the extent tree and commit current
# transaction.
sync
echo
echo "fiemap after cloning:"
xfs_io -c "fiemap -v" $MNT/foo
rm -f $MNT/bar
echo
echo "fiemap after removing file bar:"
xfs_io -c "fiemap -v" $MNT/foo
umount $MNT
Running it before this patch, the extent is still listed as shared, it has
the flag 0x2000 (FIEMAP_EXTENT_SHARED) set:
$ ./test-2.sh
fiemap after cloning:
/mnt/sdj/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..127]: 26624..26751 128 0x2001
fiemap after removing file bar:
/mnt/sdj/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..127]: 26624..26751 128 0x2001
After this patch, after deleting bar in both tests, the extent is not
reported with the 0x2000 flag anymore, it gets only the flag 0x1
(which is FIEMAP_EXTENT_LAST):
$ ./test-1.sh
fiemap after cloning:
/mnt/sdj/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..127]: 26624..26751 128 0x2001
fiemap after removing file bar:
/mnt/sdj/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..127]: 26624..26751 128 0x1
$ ./test-2.sh
fiemap after cloning:
/mnt/sdj/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..127]: 26624..26751 128 0x2001
fiemap after removing file bar:
/mnt/sdj/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..127]: 26624..26751 128 0x1
These tests will later be converted to a test case for fstests.
Fixes: dc046b10c8 ("Btrfs: make fiemap not blow when you have lots of snapshots")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 141b3523e9 upstream.
The function test_bit doesn't provide any memory barrier. It may be
possible that the read requests that follow test_bit(B_READING, &b->state)
are reordered before the test, reading invalid data that existed before
B_READING was cleared.
Fix this bug by changing test_bit to test_bit_acquire. This is
particularly important on arches with weak(er) memory ordering
(e.g. arm64).
Depends-On: 8238b45798 ("wait_on_bit: add an acquire memory barrier")
Depends-On: d6ffe6067a ("provide arch_test_bit_acquire for architectures that define test_bit")
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0b6e6e149c upstream.
commit b0c07116c8 ("platform/x86: amd-pmc: Avoid reading SMU version at
probe time") adjusted the behavior for amd-pmc to avoid reading the SMU
version at startup but rather on first use to improve boot time.
However the SMU version is also used to decide whether to place a timer
based wakeup in the OS_HINT message. If the idlemask hasn't been read
before this message was sent then the SMU version will not have been
cached.
Ensure the SMU version has been read before deciding whether or not to
run this codepath.
Cc: stable@vger.kernel.org # 6.0
Reported-by: You-Sheng Yang <vicamo.yang@canonical.com>
Tested-by: Anson Tsao <anson.tsao@amd.com>
Fixes: b0c07116c8 ("platform/x86: amd-pmc: Avoid reading SMU version at probe time")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20221020113749.6621-2-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71eac70636 upstream.
Today, core ID is assumed to be unique within each package.
But an AlderLake-N platform adds a Module level between core and package,
Linux excludes the unknown modules bits from the core ID, resulting in
duplicate core ID's.
To keep core ID unique within a package, Linux must include all APIC-ID
bits for known or unknown levels above the core and below the package
in the core ID.
It is important to understand that core ID's have always come directly
from the APIC-ID encoding, which comes from the BIOS. Thus there is no
guarantee that they start at 0, or that they are contiguous.
As such, naively using them for array indexes can be problematic.
[ dhansen: un-known -> unknown ]
Fixes: 7745f03eb3 ("x86/topology: Add CPUID.1F multi-die/package support")
Suggested-by: Len Brown <len.brown@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20221014090147.1836-5-rui.zhang@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b12a7a126 upstream.
CPUID.1F/B does not enumerate Package level explicitly, instead, all the
APIC-ID bits above the enumerated levels are assumed to be package ID
bits.
Current code gets package ID by shifting out all the APIC-ID bits that
Linux supports, rather than shifting out all the APIC-ID bits that
CPUID.1F enumerates. This introduces problems when CPUID.1F enumerates a
level that Linux does not support.
For example, on a single package AlderLake-N, there are 2 Ecore Modules
with 4 atom cores in each module. Linux does not support the Module
level and interprets the Module ID bits as package ID and erroneously
reports a multi module system as a multi-package system.
Fix this by using APIC-ID bits above all the CPUID.1F enumerated levels
as package ID.
[ dhansen: spelling fix ]
Fixes: 7745f03eb3 ("x86/topology: Add CPUID.1F multi-die/package support")
Suggested-by: Len Brown <len.brown@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20221014090147.1836-4-rui.zhang@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 33806e7cb8 upstream.
A recent change in LLVM made CONFIG_EFI_STUB unselectable because it no
longer pretends to support -mabi=ms, breaking the dependency in
Kconfig. Lack of CONFIG_EFI_STUB can prevent kernels from booting via
EFI in certain circumstances.
This check was added by
8f24f8c2fc ("efi/libstub: Annotate firmware routines as __efiapi")
to ensure that __attribute__((ms_abi)) was available, as -mabi=ms is
not actually used in any cflags.
According to the GCC documentation, this attribute has been supported
since GCC 4.4.7. The kernel currently requires GCC 5.1 so this check is
not necessary; even when that change landed in 5.6, the kernel required
GCC 4.9 so it was unnecessary then as well.
Clang supports __attribute__((ms_abi)) for all versions that are
supported for building the kernel so no additional check is needed.
Remove the 'depends on' line altogether to allow CONFIG_EFI_STUB to be
selected when CONFIG_EFI is enabled, regardless of compiler.
Fixes: 8f24f8c2fc ("efi/libstub: Annotate firmware routines as __efiapi")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Cc: stable@vger.kernel.org
Link: https://github.com/llvm/llvm-project/commit/d1ad006a8f64bdc17f618deffa9e7c91d82c444d
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 06a2da340f upstream.
Debugging the decoder on msm8916 I noticed the vdec probe was crashing if
the fmt pointer was NULL.
A similar fix from Colin Ian King found by Coverity was implemented for the
encoder. Implement the same fix on the decoder.
Fixes: 7472c1c691 ("[media] media: venus: vdec: add video decoder files")
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 20b794ddce upstream.
By rounding down, the actual timeout can be lower than requested. As a
result, long spaces just below the requested timeout can be incorrectly
reported as timeout and truncated.
Fixes: 877f1a7cee ("media: rc: mceusb: allow the timeout to be configurable")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b9eb3ab6f3 upstream.
What the IMGU driver did was that it first acquired the pointers to active
and try V4L2 subdev state, and only then figured out which one to use.
The problem with that approach and a later patch (see Fixes: tag) is that
as sd_state argument to v4l2_subdev_get_try_crop() et al is NULL, there is
now an attempt to dereference that.
Fix this.
Also rewrap lines a little.
Fixes: 0d346d2a6f ("media: v4l2-subdev: add subdev-wide state struct")
Cc: stable@vger.kernel.org # for v5.14 and later
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c000a26071 upstream.
With some PCIe topologies, restoring a guest fails while
parsing the ITS device tables.
Reproducer hints:
1. Create ARM virt VM with pxb-pcie bus which adds
extra host bridges, with qemu command like:
```
-device pxb-pcie,bus_nr=8,id=pci.x,numa_node=0,bus=pcie.0 \
-device pcie-root-port,..,bus=pci.x \
...
-device pxb-pcie,bus_nr=37,id=pci.y,numa_node=1,bus=pcie.0 \
-device pcie-root-port,..,bus=pci.y \
...
```
2. Ensure the guest uses 2-level device table
3. Perform VM migration which calls save/restore device tables
In that setup, we get a big "offset" between 2 device_ids,
which makes unsigned "len" round up a big positive number,
causing the scan loop to continue with a bad GPA. For example:
1. L1 table has 2 entries;
2. and we are now scanning at L2 table entry index 2075 (pointed
to by L1 first entry)
3. if next device id is 9472, we will get a big offset: 7397;
4. with unsigned 'len', 'len -= offset * esz', len will underflow to a
positive number, mistakenly into next iteration with a bad GPA;
(It should break out of the current L2 table scanning, and jump
into the next L1 table entry)
5. that bad GPA fails the guest read.
Fix it by stopping the L2 table scan when the next device id is
outside of the current table, allowing the scan to continue from
the next L1 table entry.
Thanks to Eric Auger for the fix suggestion.
Fixes: 920a7a8fa9 ("KVM: arm64: vgic-its: Add infrastructure for tableookup")
Suggested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Eric Ren <renzhengeek@gmail.com>
[maz: commit message tidy-up]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/d9c3a564af9e2c5bf63f48a7dcbf08cd593c5c0b.1665802985.git.renzhengeek@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1739c7017f upstream.
The KVM_X86_SET_MSR_FILTER ioctls contains a pointer in the passed in
struct which means it has a different struct size depending on whether
it gets called from 32bit or 64bit code.
This patch introduces compat code that converts from the 32bit struct to
its 64bit counterpart which then gets used going forward internally.
With this applied, 32bit QEMU can successfully set MSR bitmaps when
running on 64bit kernels.
Reported-by: Andrew Randrianasulu <randrianasulu@gmail.com>
Fixes: 1a155254ff ("KVM: x86: Introduce MSR filtering")
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20221017184541.2658-4-graf@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 50b0e4d4da upstream.
Commit 8795e182b0 ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")
uncovered a bug in amdgpu that required a reordering of the driver
init sequence to avoid accessing a special register on the GPU
before it was properly set up leading to an PCI AER error. This
reordering uncovered a different hw programming ordering dependency
in some APUs where the SDMA doorbells need to be programmed before
the GFX doorbells. To fix this, move the SDMA doorbell programming
back into the soc15 common code, but use the actual doorbell range
values directly rather than the values stored in the ring structure
since those will not be initialized at this point.
This is a partial revert, but with the doorbell assignment
fixed so the proper doorbell index is set before it's used.
Fixes: e3163bc8ff ("drm/amdgpu: move nbio sdma_doorbell_range() into sdma code for vega")
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: skhan@linuxfoundation.org
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9f42cf5440 upstream.
If for some reason the speedbin length is incorrect, then there is a
memory leak in the error path because we never free the speedbin buffer.
This commit fixes the error path to always free the speedbin buffer.
Cc: v5.7+ <stable@vger.kernel.org> # v5.7+
Fixes: a8811ec764 ("cpufreq: qcom: Add support for krait based socs")
Signed-off-by: Fabien Parent <fabien.parent@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 67bf649344 upstream.
AMD systems support zero CBM (capacity bit mask) for cache allocation.
That is reflected in rdt_init_res_defs_amd() by:
r->cache.arch_has_empty_bitmaps = true;
However given the unified code in cbm_validate(), checking for:
val == 0 && !arch_has_empty_bitmaps
is not enough because of another check in cbm_validate():
if ((zero_bit - first_bit) < r->cache.min_cbm_bits)
The default value of r->cache.min_cbm_bits = 1.
Leading to:
$ cd /sys/fs/resctrl
$ mkdir foo
$ cd foo
$ echo L3:0=0 > schemata
-bash: echo: write error: Invalid argument
$ cat /sys/fs/resctrl/info/last_cmd_status
Need at least 1 bits in the mask
Initialize the min_cbm_bits to 0 for AMD. Also, remove the default
setting of min_cbm_bits and initialize it separately.
After the fix:
$ cd /sys/fs/resctrl
$ mkdir foo
$ cd foo
$ echo L3:0=0 > schemata
$ cat /sys/fs/resctrl/info/last_cmd_status
ok
Fixes: 316e7f901f ("x86/resctrl: Add struct rdt_cache::arch_has_{sparse, empty}_bitmaps")
Co-developed-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: James Morse <james.morse@arm.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/lkml/20220517001234.3137157-1-eranian@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e7ad18d116 upstream.
Currently, the patch application logic checks whether the revision
needs to be applied on each logical CPU (SMT thread). Therefore, on SMT
designs where the microcode engine is shared between the two threads,
the application happens only on one of them as that is enough to update
the shared microcode engine.
However, there are microcode patches which do per-thread modification,
see Link tag below.
Therefore, drop the revision check and try applying on each thread. This
is what the BIOS does too so this method is very much tested.
Btw, change only the early paths. On the late loading paths, there's no
point in doing per-thread modification because if is it some case like
in the bugzilla below - removing a CPUID flag - the kernel cannot go and
un-use features it has detected are there early. For that, one should
use early loading anyway.
[ bp: Fixes does not contain the oldest commit which did check for
equality but that is good enough. ]
Fixes: 8801b3fcb5 ("x86/microcode/AMD: Rework container parsing")
Reported-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216211
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1dcaf30725 upstream.
When the Tegra194 CPUFREQ driver is built as a module it is not
automatically loaded as expected on Tegra194 devices. Populate the
MODULE_DEVICE_TABLE to fix this.
Cc: v5.9+ <stable@vger.kernel.org> # v5.9+
Fixes: df320f8935 ("cpufreq: Add Tegra194 cpufreq driver")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 61775d54d6 upstream.
When we compile-in the CCI along with the imx412 driver and run on the RB5
we see that i2c_add_adapter() causes the probe of the imx412 driver to
happen.
This probe tries to perform an i2c xfer() and the xfer() in i2c-qcom-cci.c
fails on pm_runtime_get() because the i2c-qcom-cci.c::probe() function has
not completed to pm_runtime_enable(dev).
Fix this sequence by ensuring pm_runtime_xxx() calls happen prior to adding
the i2c adapter.
Fixes: e517526195 ("i2c: Add Qualcomm CCI I2C driver")
Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 01039fb8e9 upstream.
This commit fixes a kernel oops because of a write in some read-only memory:
[ 9.068287] Unable to handle kernel write to read-only memory at virtual address ffff800009240ad8
..snip..
[ 9.138790] Internal error: Oops: 9600004f [#1] PREEMPT SMP
..snip..
[ 9.269161] Call trace:
[ 9.276271] __memcpy+0x5c/0x230
[ 9.278531] snprintf+0x58/0x80
[ 9.282002] qcom_cpufreq_msm8939_name_version+0xb4/0x190
[ 9.284869] qcom_cpufreq_probe+0xc8/0x39c
..snip..
The following line defines a pointer that point to a char buffer stored
in read-only memory:
char *pvs_name = "speedXX-pvsXX-vXX";
This pointer is meant to hold a template "speedXX-pvsXX-vXX" where the
XX values get overridden by the qcom_cpufreq_krait_name_version function. Since
the template is actually stored in read-only memory, when the function
executes the following call we get an oops:
snprintf(*pvs_name, sizeof("speedXX-pvsXX-vXX"), "speed%d-pvs%d-v%d",
speed, pvs, pvs_ver);
To fix this issue, we instead store the template name onto the stack by
using the following syntax:
char pvs_name_buffer[] = "speedXX-pvsXX-vXX";
Because the `pvs_name` needs to be able to be assigned to NULL, the
template buffer is stored in the pvs_name_buffer and not under the
pvs_name variable.
Cc: v5.7+ <stable@vger.kernel.org> # v5.7+
Fixes: a8811ec764 ("cpufreq: qcom: Add support for krait based socs")
Signed-off-by: Fabien Parent <fabien.parent@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit abe3c63144 upstream.
The following warning was triggered on a hardware environment:
SELinux: Converting 162 SID table entries...
BUG: sleeping function called from invalid context at
__might_sleep+0x60/0x74 0x0
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 5943, name: tar
CPU: 7 PID: 5943 Comm: tar Tainted: P O 5.10.0 #1
Call trace:
dump_backtrace+0x0/0x1c8
show_stack+0x18/0x28
dump_stack+0xe8/0x15c
___might_sleep+0x168/0x17c
__might_sleep+0x60/0x74
__kmalloc_track_caller+0xa0/0x7dc
kstrdup+0x54/0xac
convert_context+0x48/0x2e4
sidtab_context_to_sid+0x1c4/0x36c
security_context_to_sid_core+0x168/0x238
security_context_to_sid_default+0x14/0x24
inode_doinit_use_xattr+0x164/0x1e4
inode_doinit_with_dentry+0x1c0/0x488
selinux_d_instantiate+0x20/0x34
security_d_instantiate+0x70/0xbc
d_splice_alias+0x4c/0x3c0
ext4_lookup+0x1d8/0x200 [ext4]
__lookup_slow+0x12c/0x1e4
walk_component+0x100/0x200
path_lookupat+0x88/0x118
filename_lookup+0x98/0x130
user_path_at_empty+0x48/0x60
vfs_statx+0x84/0x140
vfs_fstatat+0x20/0x30
__se_sys_newfstatat+0x30/0x74
__arm64_sys_newfstatat+0x1c/0x2c
el0_svc_common.constprop.0+0x100/0x184
do_el0_svc+0x1c/0x2c
el0_svc+0x20/0x34
el0_sync_handler+0x80/0x17c
el0_sync+0x13c/0x140
SELinux: Context system_u:object_r:pssp_rsyslog_log_t:s0:c0 is
not valid (left unmapped).
It was found that within a critical section of spin_lock_irqsave in
sidtab_context_to_sid(), convert_context() (hooked by
sidtab_convert_params.func) might cause the process to sleep via
allocating memory with GFP_KERNEL, which is problematic.
As Ondrej pointed out [1], convert_context()/sidtab_convert_params.func
has another caller sidtab_convert_tree(), which is okay with GFP_KERNEL.
Therefore, fix this problem by adding a gfp_t argument for
convert_context()/sidtab_convert_params.func and pass GFP_KERNEL/_ATOMIC
properly in individual callers.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20221018120111.1474581-1-gongruiqi1@huawei.com/ [1]
Reported-by: Tan Ninghao <tanninghao1@huawei.com>
Fixes: ee1a84fdfe ("selinux: overhaul sidtab to fix bug and improve performance")
Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com>
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
[PM: wrap long BUG() output lines, tweak subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 096bbeec7b upstream.
The "Server interfaces" count in /proc/fs/cifs/DebugData increases
as the interfaces are requeried, rather than being reset to the new
value. This could cause a problem if the server disabled
multichannel as the iface_count is checked in try_adding_channels
to see if multichannel still supported.
Also fixes a coverity warning:
Addresses-Coverity: 1526374 ("Concurrent data access violations (MISSING_LOCK)")
Cc: <stable@vger.kernel.org>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 759a7c6126 upstream.
Commit b1529a41f7 "ocfs2: should reclaim the inode if
'__ocfs2_mknod_locked' returns an error" tried to reclaim the claimed
inode if __ocfs2_mknod_locked() fails later. But this introduce a race,
the freed bit may be reused immediately by another thread, which will
update dinode, e.g. i_generation. Then iput this inode will lead to BUG:
inode->i_generation != le32_to_cpu(fe->i_generation)
We could make this inode as bad, but we did want to do operations like
wipe in some cases. Since the claimed inode bit can only affect that an
dinode is missing and will return back after fsck, it seems not a big
problem. So just leave it as is by revert the reclaim logic.
Link: https://lkml.kernel.org/r/20221017130227.234480-1-joseph.qi@linux.alibaba.com
Fixes: b1529a41f7 ("ocfs2: should reclaim the inode if '__ocfs2_mknod_locked' returns an error")
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reported-by: Yan Wang <wangyan122@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Call sysfb_disable() from aperture_remove_conflicting_pci_devices()
before removing PCI devices. Without, simpledrm can still bind to
simple-framebuffer devices after the hardware driver has taken over
the hardware. Both drivers interfere with each other and results are
undefined.
Reported modesetting errors [1] are shown below.
---- snap ----
rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 13-.... } 7 jiffies s: 165 root: 0x2000/.
rcu: blocking rcu_node structures (internal RCU debug):
Task dump for CPU 13:
task:X state:R running task stack: 0 pid: 4242 ppid: 4228 flags:0x00000008
Call Trace:
<TASK>
? commit_tail+0xd7/0x130
? drm_atomic_helper_commit+0x126/0x150
? drm_atomic_commit+0xa4/0xe0
? drm_plane_get_damage_clips.cold+0x1c/0x1c
? drm_atomic_helper_dirtyfb+0x19e/0x280
? drm_mode_dirtyfb_ioctl+0x10f/0x1e0
? drm_mode_getfb2_ioctl+0x2d0/0x2d0
? drm_ioctl_kernel+0xc4/0x150
? drm_ioctl+0x246/0x3f0
? drm_mode_getfb2_ioctl+0x2d0/0x2d0
? __x64_sys_ioctl+0x91/0xd0
? do_syscall_64+0x60/0xd0
? entry_SYSCALL_64_after_hwframe+0x4b/0xb5
</TASK>
...
rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 13-.... } 30 jiffies s: 169 root: 0x2000/.
rcu: blocking rcu_node structures (internal RCU debug):
Task dump for CPU 13:
task:X state:R running task stack: 0 pid: 4242 ppid: 4228 flags:0x0000400e
Call Trace:
<TASK>
? memcpy_toio+0x76/0xc0
? memcpy_toio+0x1b/0xc0
? drm_fb_memcpy_toio+0x76/0xb0
? drm_fb_blit_toio+0x75/0x2b0
? simpledrm_simple_display_pipe_update+0x132/0x150
? drm_atomic_helper_commit_planes+0xb6/0x230
? drm_atomic_helper_commit_tail+0x44/0x80
? commit_tail+0xd7/0x130
? drm_atomic_helper_commit+0x126/0x150
? drm_atomic_commit+0xa4/0xe0
? drm_plane_get_damage_clips.cold+0x1c/0x1c
? drm_atomic_helper_dirtyfb+0x19e/0x280
? drm_mode_dirtyfb_ioctl+0x10f/0x1e0
? drm_mode_getfb2_ioctl+0x2d0/0x2d0
? drm_ioctl_kernel+0xc4/0x150
? drm_ioctl+0x246/0x3f0
? drm_mode_getfb2_ioctl+0x2d0/0x2d0
? __x64_sys_ioctl+0x91/0xd0
? do_syscall_64+0x60/0xd0
? entry_SYSCALL_64_after_hwframe+0x4b/0xb5
</TASK>
The problem was added by commit 5e01376124 ("video/aperture: Disable
and unregister sysfb devices via aperture helpers") to v6.0.3 and does
not exist in the mainline branch.
The mainline commit 5e01376124 ("video/aperture: Disable and
unregister sysfb devices via aperture helpers") has been backported
from v6.0-rc1 to stable v6.0.3 from a larger patch series [2] that
reworks fbdev framebuffer ownership. The backport misses a change to
aperture_remove_conflicting_pci_devices(). Mainline itself is fine,
because the function does not exist there as a result of the patch
series.
Instead of backporting the whole series, fix the additional function.
Reported-by: Andreas Thalhammer <andreas.thalhammer-linux@gmx.net>
Reported-by: Thorsten Leemhuis <regressions@leemhuis.info>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Andreas Thalhammer <andreas.thalhammer-linux@gmx.net>
Fixes: cfecfc98a7 ("video/aperture: Disable and unregister sysfb devices via aperture helpers")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Zack Rusin <zackr@vmware.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Changcheng Deng <deng.changcheng@zte.com.cn>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Sasha Levin <sashal@kernel.org>
Cc: linux-fbdev@vger.kernel.org
Cc: <stable@vger.kernel.org> # v6.0.3+
Link: https://lore.kernel.org/dri-devel/d6afe54b-f8d7-beb2-3609-186e566cbfac@gmx.net/T/#t # [1]
Link: https://patchwork.freedesktop.org/series/106040/ # [2]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c461c677a8 upstream.
Commit 8c193f4714 ("pwm: tegra: Optimize period calculation") updated
the period calculation in the Tegra PWM driver and now returns an error
if the period requested is less than minimum period supported. This is
breaking PWM support on various Tegra platforms. For example, on the
Tegra210 Jetson Nano platform this is breaking the PWM fan support and
probing the PWM fan driver now fails ...
pwm-fan pwm-fan: Failed to configure PWM: -22
pwm-fan: probe of pwm-fan failed with error -22
The problem is that the default parent clock for the PWM on Tegra210 is
a 32kHz clock and is unable to support the requested PWM period.
Fix PWM support on Tegra20, Tegra30, Tegra114, Tegra124 and Tegra210 by
updating the parent clock for the PWM to be the PLL_P.
Fixes: 8c193f4714 ("pwm: tegra: Optimize period calculation")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Robert Eckelmann <longnoserob@gmail.com> # TF101 T20
Tested-by: Antoni Aloy Torrens <aaloytorrens@gmail.com> # TF101 T20
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # TF201 T30
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # TF700T T3
Link: https://lore.kernel.org/r/20221010100046.6477-1-jonathanh@nvidia.com
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 7494e2e6c5.
Which was upstream commit f2bd1c5ae2.
The patch caused a regression leading to the missing HD-audio device
with ASoC SOF driver. It was a part of large series and backporting
it alone breaks things while backporting the whole is too intrusive
as stable changes. And, the issue the patch tries to address is a
corner case, hence it's better to revert.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216613
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 996d3efeb0 upstream.
If the CPU mask allocation for a node fails, then the memory allocated for
the 'io_wqe' struct of the current node doesn't get freed on the error
handling path, since it has not yet been added to the 'wqes' array.
This was spotted when fuzzing v6.1-rc1 with Syzkaller:
BUG: memory leak
unreferenced object 0xffff8880093d5000 (size 1024):
comm "syz-executor.2", pid 7701, jiffies 4295048595 (age 13.900s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000cb463369>] __kmem_cache_alloc_node+0x18e/0x720
[<00000000147a3f9c>] kmalloc_node_trace+0x2a/0x130
[<000000004e107011>] io_wq_create+0x7b9/0xdc0
[<00000000c38b2018>] io_uring_alloc_task_context+0x31e/0x59d
[<00000000867399da>] __io_uring_add_tctx_node.cold+0x19/0x1ba
[<000000007e0e7a79>] io_uring_setup.cold+0x1b80/0x1dce
[<00000000b545e9f6>] __x64_sys_io_uring_setup+0x5d/0x80
[<000000008a8a7508>] do_syscall_64+0x5d/0x90
[<000000004ac08bec>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: 0e03496d19 ("io-wq: use private CPU mask")
Cc: stable@vger.kernel.org
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Link: https://lore.kernel.org/r/20221020014710.902201-1-rafaelmendsr@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 977ef30a7d upstream.
Starting with GCC 12.1, the created .gcda format can't be read by gcov
tool. There are 2 significant changes to the .gcda file format that
need to be supported:
a) [gcov: Use system IO buffering]
(23eb66d1d46a34cb28c4acbdf8a1deb80a7c5a05) changed that all sizes in
the format are in bytes and not in words (4B)
b) [gcov: make profile merging smarter]
(72e0c742bd01f8e7e6dcca64042b9ad7e75979de) add a new checksum to the
file header.
Tested with GCC 7.5, 10.4, 12.2 and the current master.
Link: https://lkml.kernel.org/r/624bda92-f307-30e9-9aaa-8cc678b2dfb2@suse.cz
Signed-off-by: Martin Liska <mliska@suse.cz>
Tested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8a254d90a7 upstream.
Commit bbc6d2c6ef ("efi: vars: Switch to new wrapper layer")
refactored the efivars layer so that the 'business logic' related to
which UEFI variables affect the boot flow in which way could be moved
out of it, and into the efivarfs driver.
This inadvertently broke setting variables on firmware implementations
that lack the QueryVariableInfo() boot service, because we no longer
tolerate a EFI_UNSUPPORTED result from check_var_size() when calling
efivar_entry_set_get_size(), which now ends up calling check_var_size()
a second time inadvertently.
If QueryVariableInfo() is missing, we support writes of up to 64k -
let's move that logic into check_var_size(), and drop the redundant
call.
Cc: <stable@vger.kernel.org> # v6.0
Fixes: bbc6d2c6ef ("efi: vars: Switch to new wrapper layer")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Tomlinson