[ Upstream commit c68cd258a6 ]
The enet_qos_root_clk takes sim_enet_root_clk as parent. When
registering enet_qos_root_clk, it will be put into clk orphan list,
because sim_enet_root_clk is not ready.
When sim_enet_root_clk is ready, clk_core_reparent_orphans_nolock will
set enet_qos_root_clk parent to sim_enet_root_clk.
Because CLK_OPS_PARENT_ENABLE is set, sim_enet_root_clk will be
enabled and disabled during the enet_qos_root_clk reparent phase.
All the above are correct. But with M7 booted early and using
enet, M7 enet feature will be broken, because clk driver probe phase
disable the needed clks, in case M7 firmware not configure
sim_enet_root_clk.
And tune the order would also save cpu cycles.
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20220815013428.476015-1-peng.fan@oss.nxp.com
Stable-dep-of: 855ae87a20 ("clk: imx: scu: fix memleak on platform_device_add() fails")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c5422851d ]
When testing for a series affecting the VEC, it was discovered that
turning off and on the VEC clock is crashing the system.
It turns out that, when disabling the VEC clock, it's the only child of
the PLLC-per clock which will also get disabled. The source of the crash
is PLLC-per being disabled.
It's likely that some other device might not take a clock reference that
it actually needs, but it's unclear which at this point. Let's make
PLLC-per critical so that we don't have that crash.
Reported-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220926084509.12233-1-maxime@cerno.tech
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Stable-dep-of: 0b919a3728 ("clk: bcm2835: fix bcm2835_clock_rate_from_divisor declaration")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 081a9b7c74 ]
It turns out the internal SATA reference clock signal will stay
unavailable for the SATA interface consumer until the buffer on it's way
is ungated. So aside with having the actual clock divider enabled we need
to ungate a buffer placed on the signal way to the SATA controller (most
likely some rudiment from the initial SoC release). Seeing the switch flag
is placed in the same register as the SATA-ref clock divider at a
non-standard ffset, let's implement it as a separate clock controller with
the set-rate propagation to the parental clock divider wrapper. As such
we'll be able to disable/enable and still change the original clock source
rate.
Fixes: 353afa3a8d ("clk: Add Baikal-T1 CCU Dividers driver")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20220929225402.9696-5-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2eef31276 ]
Baikal-T1 CCU reference manual says that both xGMAC reference and xGMAC
PTP clocks are generated by two different wrappers with the same constant
divider thus each producing a 156.25 MHz signal. But for some reason both
of these clock sources are gated by a single switch-flag in the CCU
registers space - CCU_SYS_XGMAC_BASE.BIT(0). In order to make the clocks
handled independently we need to define a shared parental gate so the base
clock signal would be switched off only if both of the child-clocks are
disabled.
Note the ID is intentionally set to -2 since we are going to add a one
more internal clock identifier in the next commit.
Fixes: 353afa3a8d ("clk: Add Baikal-T1 CCU Dividers driver")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20220929225402.9696-4-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c388cc8040 ]
We have discovered random glitches during the system boot up procedure.
The problem investigation led us to the weird outcomes: when none of the
Renesas 5P49V6901 ports are explicitly enabled by the kernel driver, the
glitches disappeared. It was a mystery since the SoC external clock
domains were fed with different 5P49V6901 outputs. The driver code didn't
seem like bogus either. We almost despaired to find out a root cause when
the solution has been found for a more modern revision of the chip. It
turned out the 5P49V6901 clock generator stopped its output for a short
period of time during the VC5_OUT_DIV_CONTROL register writing. The same
problem was found for the 5P49V6965 revision of the chip and was
successfully fixed in commit fc336ae622 ("clk: vc5: fix output disabling
when enabling a FOD") by enabling the "bypass_sync" flag hidden inside
"Unused Factory Reserved Register". Even though the 5P49V6901 registers
description and programming guide doesn't provide any intel regarding that
flag, setting it up anyway in the officially unused register completely
eliminated the denoted glitches. Thus let's activate the functionality
submitted in commit fc336ae622 ("clk: vc5: fix output disabling when
enabling a FOD") for the Renesas 5P49V6901 chip too in order to remove the
ports implicit inter-dependency.
Fixes: dbf6b16f56 ("clk: vc5: Add support for IDT VersaClock 5P49V6901")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Link: https://lore.kernel.org/r/20220929225402.9696-2-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 68266bdcce ]
Based on num_hid_devices, each sensor device registers to HID. If
"no sensors" then amd_sfh work initialization and scheduling
doesn’t make sense and return ENODEV to stop driver probe.
Hence add a check for num_hid_devices to handle special
case in the situation of "no sensors" for SFH1.1.
Fixes: 93ce5e0231 ("HID: amd_sfh: Implement SFH1.1 functionality")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 898ec89dbb ]
User reports observing timer event report channel halted but no error
observed in CHANERR register. The driver finished self-test and released
channel resources. Debug shows that __cleanup() can call
mod_timer() after the timer has been deleted and thus resurrect the
timer. While harmless, it causes suprious error message to be emitted.
Use mod_timer_pending() call to prevent deleted timer from being
resurrected.
Fixes: 3372de5813 ("dmaengine: ioatdma: removal of dma_v3.c and relevant ioat3 references")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166360672197.3851724.17040290563764838369.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20f7a0dba9 ]
When the cleanup paths for the various clk register APIs in the MediaTek
clk library were added, the one in the dividers type used the wrong type
of unregister function. This would result in incorrect dereferencing of
the clk pointer and freeing of invalid pointers.
Fix this by switching to the correct type of clk unregistration call.
Fixes: 3c3ba2ab02 ("clk: mediatek: mtk: Implement error handling in register APIs")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220926102523.2367530-2-wenst@chromium.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5f7bf5458 ]
The MFG_BG3D is a gate to enable/disable clock output to the GPU,
but the actual output is decided by multiple muxes; in particular:
mfg_ck_fast_ref muxes between "slow" (top_mfg_core_tmp) and
"fast" (MFGPLL) clock, while top_mfg_core_tmp muxes between the
26MHz clock and various system PLLs.
The clock gate comes after all the muxes, so its parent is
mfg_ck_fast_reg, not top_mfg_core_tmp.
Reparent MFG_BG3D to the latter to match the hardware and add the
CLK_SET_RATE_PARENT flag to it: this way we ensure propagating
rate changes that are requested on MFG_BG3D along its entire clock
tree.
Fixes: 35016f10c0 ("clk: mediatek: Add MT8195 mfgcfg clock support")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220927101128.44758-6-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75db790735 ]
The mx25_tsadc_remove() function assumes all non-zero returns are success
but the platform_get_irq() function returns negative on error and
positive non-zero values on success. It never returns zero, but if it
did then treat that as a success.
Fixes: 18f7739379 ("mfd: fsl-imx25: Clean up irq settings during removal")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/YvTfkbVQWYKMKS/t@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fda5d0cf8a ]
Currently in resize_finish() in rxe_queue.c there is a loop which copies
the entries in the original queue into a newly allocated queue. The
termination logic for this loop is incorrect. The call to
queue_next_index() updates cons but has no effect on whether the queue is
empty. So if the queue starts out empty nothing is copied but if it is not
then the loop will run forever. This patch changes the loop to compare the
value of cons to the original producer index.
Fixes: ae6e843fe0 ("RDMA/rxe: Add memory barriers to kernel queues")
Link: https://lore.kernel.org/r/20220825221446.6512-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1befd944e0 ]
Currently blktests nvme/002 trips up debugobjects if CONFIG_NVME_AUTH is
enabled, but authentication is not on a queue. This is because
nvmet_auth_sq_free cancels sq->auth_expired_work unconditionaly, while
auth_expired_work is only ever initialized if authentication is enabled
for a given controller.
Fix this by calling most of what is nvmet_init_auth unconditionally
when initializing the SQ, and just do the setting of the result
field in the connect command handler.
Fixes: db1312dd95 ("nvmet: implement basic In-Band Authentication")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57569c37f0 ]
Fix a NULL pointer crash that occurs when we are freeing the socket at the
same time we access it via sysfs.
The problem is that:
1. iscsi_sw_tcp_conn_get_param() and iscsi_sw_tcp_host_get_param() take
the frwd_lock and do sock_hold() then drop the frwd_lock. sock_hold()
does a get on the "struct sock".
2. iscsi_sw_tcp_release_conn() does sockfd_put() which does the last put
on the "struct socket" and that does __sock_release() which sets the
sock->ops to NULL.
3. iscsi_sw_tcp_conn_get_param() and iscsi_sw_tcp_host_get_param() then
call kernel_getpeername() which accesses the NULL sock->ops.
Above we do a get on the "struct sock", but we needed a get on the "struct
socket". Originally, we just held the frwd_lock the entire time but in
commit bcf3a2953d ("scsi: iscsi: iscsi_tcp: Avoid holding spinlock while
calling getpeername()") we switched to refcount based because the network
layer changed and started taking a mutex in that path, so we could no
longer hold the frwd_lock.
Instead of trying to maintain multiple refcounts, this just has us use a
mutex for accessing the socket in the interface code paths.
Link: https://lore.kernel.org/r/20220907221700.10302-1-michael.christie@oracle.com
Fixes: bcf3a2953d ("scsi: iscsi: iscsi_tcp: Avoid holding spinlock while calling getpeername()")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8c22c4697 ]
Disabling the remote phy for a SATA disk causes a hang:
root@(none)$ more /sys/class/sas_phy/phy-0:0:8/target_port_protocols
sata
root@(none)$ echo 0 > sys/class/sas_phy/phy-0:0:8/enable
root@(none)$ [ 67.855950] sas: ex 500e004aaaaaaa1f phy08 change count has changed
[ 67.920585] sd 0:0:2:0: [sdc] Synchronizing SCSI cache
[ 67.925780] sd 0:0:2:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=0x04 driverbyte=DRIVER_OK
[ 67.935094] sd 0:0:2:0: [sdc] Stopping disk
[ 67.939305] sd 0:0:2:0: [sdc] Start/Stop Unit failed: Result: hostbyte=0x04 driverbyte=DRIVER_OK
...
[ 123.998998] INFO: task kworker/u192:1:642 blocked for more than 30 seconds.
[ 124.005960] Not tainted 6.0.0-rc1-205202-gf26f8f761e83 #218
[ 124.012049] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 124.019872] task:kworker/u192:1 state:D stack:0 pid: 642 ppid: 2 flags:0x00000008
[ 124.028223] Workqueue: 0000:04:00.0_event_q sas_port_event_worker
[ 124.034319] Call trace:
[ 124.036758] __switch_to+0x128/0x278
[ 124.040333] __schedule+0x434/0xa58
[ 124.043820] schedule+0x94/0x138
[ 124.047045] schedule_timeout+0x2fc/0x368
[ 124.051052] wait_for_completion+0xdc/0x200
[ 124.055234] __flush_workqueue+0x1a8/0x708
[ 124.059328] sas_porte_broadcast_rcvd+0xa8/0xc0
[ 124.063858] sas_port_event_worker+0x60/0x98
[ 124.068126] process_one_work+0x3f8/0x660
[ 124.072134] worker_thread+0x70/0x700
[ 124.075793] kthread+0x1a4/0x1b8
[ 124.079014] ret_from_fork+0x10/0x20
The issue is that the per-device running_req read in
pm8001_dev_gone_notify() never goes to zero and we never make progress.
This is caused by missing accounting for running_req for when an internal
abort command completes.
In commit 2cbbf48977 ("scsi: pm8001: Use libsas internal abort support")
we started to send internal abort commands as a proper sas_task. In this
when we deliver a sas_task to HW the per-device running_req is incremented
in pm8001_queue_command(). However it is never decremented for internal
abort commnds, so decrement in pm8001_mpi_task_abort_resp().
Link: https://lore.kernel.org/r/1663854664-76165-1-git-send-email-john.garry@huawei.com
Fixes: 2cbbf48977 ("scsi: pm8001: Use libsas internal abort support")
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46ba53c306 ]
When executing SMP task failed, the smp_execute_task_sg() calls del_timer()
to delete "slow_task->timer". However, if the timer handler
sas_task_internal_timedout() is running, the del_timer() in
smp_execute_task_sg() will not stop it and a UAF will happen. The process
is shown below:
(thread 1) | (thread 2)
smp_execute_task_sg() | sas_task_internal_timedout()
... |
del_timer() |
... | ...
sas_free_task(task) |
kfree(task->slow_task) //FREE|
| task->slow_task->... //USE
Fix by calling del_timer_sync() in smp_execute_task_sg(), which makes sure
the timer handler have finished before the "task->slow_task" is
deallocated.
Link: https://lore.kernel.org/r/20220920144213.10536-1-duoming@zju.edu.cn
Fixes: 2908d778ab ("[SCSI] aic94xx: new driver")
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 379a33786d ]
Since commit edc6afc549 ("tty: switch to ktermios and new framework")
termios speed is no longer stored only in c_cflag member but also in new
additional c_ispeed and c_ospeed members. If BOTHER flag is set in c_cflag
then termios speed is stored only in these new members.
Since commit 027b57170b ("serial: core: Fix initializing and restoring
termios speed") termios speed is available also in struct console.
So properly restore also c_ispeed and c_ospeed members after suspend to fix
restoring termios speed which is not represented by Bnnn constant.
Fixes: 4516d50aab ("serial: 8250: Use canary to restart console after suspend")
Signed-off-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20220924104324.4035-1-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a2db520e3 ]
In some initialization functions of this driver, memory is allocated with
'i' acting as an index variable and increasing from 0. The commit in
"Fixes" introduces some clean-up codes in case of allocation failure,
which free memory in reverse order with 'i' decreasing to 0. However,
there are some problems:
- The case i=0 is left out. Thus memory is leaked.
- In case memory allocation fails right from the start, the memory
freeing loops will start with i=-1 and invalid memory locations will
be accessed.
One of these loops has been fixed in commit c8ff915358 ("staging:
vt6655: fix potential memory leak"). Fix the remaining erroneous loops.
Link: https://lore.kernel.org/linux-staging/Yx9H1zSpxmNqx6Xc@kadam/
Fixes: 5341ee0adb ("staging: vt6655: check for memory allocation failures")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Signed-off-by: Nam Cao <namcaov@gmail.com>
Link: https://lore.kernel.org/r/20220912170429.29852-1-namcaov@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c3966ced8e ]
Smatch reports the following error:
drivers/phy/qualcomm/phy-qcom-usb-hsic.c:82 qcom_usb_hsic_phy_power_on()
warn: 'uphy->cal_clk' from clk_prepare_enable() not released on lines:
58.
drivers/phy/qualcomm/phy-qcom-usb-hsic.c:82 qcom_usb_hsic_phy_power_on()
warn: 'uphy->cal_sleep_clk' from clk_prepare_enable() not released on
lines: 58.
drivers/phy/qualcomm/phy-qcom-usb-hsic.c:82 qcom_usb_hsic_phy_power_on()
warn: 'uphy->phy_clk' from clk_prepare_enable() not released on lines:
58.
Fix this by calling proper clk_disable_unprepare calls.
Fixes: 0b56e9a7e8 ("phy: Group vendor specific phy drivers")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20220914051334.69282-1-dzm91@hust.edu.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 039d492637 ]
Invoking TIOCVHANGUP on 8250_mid port on Ice Lake-D and then reopening
the port triggers these faults during serial8250_do_startup():
DMAR: DRHD: handling fault status reg 3
DMAR: [DMA Write NO_PASID] Request device [00:1a.0] fault addr 0x0 [fault reason 0x05] PTE Write access is not set
If the IRQ hasn't been set up yet, the UART will have zeroes in its MSI
address/data registers. Disabling the IRQ at the interrupt controller
won't stop the UART from performing a DMA write to the address programmed
in its MSI address register (zero) when it wants to signal an interrupt.
The UARTs (in Ice Lake-D) implement PCI 2.1 style MSI without masking
capability, so there is no way to mask the interrupt at the source PCI
function level, except disabling the MSI capability entirely, but that
would cause it to fall back to INTx# assertion, and the PCI specification
prohibits disabling the MSI capability as a way to mask a function's
interrupt service request.
The MSI address register is zeroed by the hangup as the irq is freed.
The interrupt is signalled during serial8250_do_startup() performing a
THRE test that temporarily toggles THRI in IER. The THRE test currently
occurs before UART's irq (and MSI address) is properly set up.
Refactor serial8250_do_startup() such that irq is set up before the
THRE test. The current irq setup code is intermixed with the timer
setup code. As THRE test must be performed prior to the timer setup,
extract it into own function and call it only after the THRE test.
The ->setup_timer() needs to be part of the struct uart_8250_ops in
order to not create circular dependency between 8250 and 8250_base
modules.
Fixes: 40b36daad0 ("[PATCH] 8250 UART backup timer")
Reported-by: Lennert Buytenhek <buytenh@arista.com>
Tested-by: Lennert Buytenhek <buytenh@arista.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220922070005.2965-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24b7ba2f88 ]
When opts->pnp_string is changed with configfs, new memory is allocated for
the string. It does not, however, update dev->pnp_string, even though the
memory is freed. When rquesting the string, the host then gets old or
corrupted data rather than the new string. The ieee 1284 id string should
be allowed to change while the device is connected.
The bug was introduced in commit fdc01cc286 ("usb: gadget: printer:
Remove pnp_string static buffer"), which changed opts->pnp_string from a
char[] to a char*.
This patch changes dev->pnp_string from a char* to a char** pointing to
opts->pnp_string.
Fixes: fdc01cc286 ("usb: gadget: printer: Remove pnp_string static buffer")
Signed-off-by: Albert Briscoe <albertsbriscoe@gmail.com>
Link: https://lore.kernel.org/r/20220911223753.20417-1-albertsbriscoe@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 241f9a27e0 ]
Set 'iova' and 'length' on ib_mr in ib_uverbs and ib_core layers to let all
drivers have the members filled. Also, this commit removes redundancy in
the respective drivers.
Previously, commit 04c0a5fcfc ("IB/uverbs: Set IOVA on IB MR in uverbs
layer") changed to set 'iova', but seems to have missed 'length' and the
ib_core layer at that time.
Fixes: 04c0a5fcfc ("IB/uverbs: Set IOVA on IB MR in uverbs layer")
Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Link: https://lore.kernel.org/r/20220921080844.1616883-1-matsuda-daisuke@fujitsu.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3bfc3bcd78 ]
A regression is seen where mddev devices stay permanently after they
are stopped due to an elevated reference count.
This was tracked down to an extra mddev_get() in md_seq_start().
It only happened rarely because most of the time the md_seq_start()
is called with a zero offset. The path with an extra mddev_get() only
happens when it starts with a non-zero offset.
The commit noted below changed an mddev_get() to check its success
but inadvertently left the original call in. Remove the extra call.
Fixes: 12a6caf273 ("md: only delete entries from all_mddevs when the disk is freed")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Guoqing Jiang <Guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c66a6f41e0 ]
When running chunk-sized reads on disks with badblocks duplicate bio
free/puts are observed:
=============================================================================
BUG bio-200 (Not tainted): Object already free
-----------------------------------------------------------------------------
Allocated in mempool_alloc_slab+0x17/0x20 age=3 cpu=2 pid=7504
__slab_alloc.constprop.0+0x5a/0xb0
kmem_cache_alloc+0x31e/0x330
mempool_alloc_slab+0x17/0x20
mempool_alloc+0x100/0x2b0
bio_alloc_bioset+0x181/0x460
do_mpage_readpage+0x776/0xd00
mpage_readahead+0x166/0x320
blkdev_readahead+0x15/0x20
read_pages+0x13f/0x5f0
page_cache_ra_unbounded+0x18d/0x220
force_page_cache_ra+0x181/0x1c0
page_cache_sync_ra+0x65/0xb0
filemap_get_pages+0x1df/0xaf0
filemap_read+0x1e1/0x700
blkdev_read_iter+0x1e5/0x330
vfs_read+0x42a/0x570
Freed in mempool_free_slab+0x17/0x20 age=3 cpu=2 pid=7504
kmem_cache_free+0x46d/0x490
mempool_free_slab+0x17/0x20
mempool_free+0x66/0x190
bio_free+0x78/0x90
bio_put+0x100/0x1a0
raid5_make_request+0x2259/0x2450
md_handle_request+0x402/0x600
md_submit_bio+0xd9/0x120
__submit_bio+0x11f/0x1b0
submit_bio_noacct_nocheck+0x204/0x480
submit_bio_noacct+0x32e/0xc70
submit_bio+0x98/0x1a0
mpage_readahead+0x250/0x320
blkdev_readahead+0x15/0x20
read_pages+0x13f/0x5f0
page_cache_ra_unbounded+0x18d/0x220
Slab 0xffffea000481b600 objects=21 used=0 fp=0xffff8881206d8940 flags=0x17ffffc0010201(locked|slab|head|node=0|zone=2|lastcpupid=0x1fffff)
CPU: 0 PID: 34525 Comm: kworker/u24:2 Not tainted 6.0.0-rc2-localyes-265166-gf11c5343fa3f #143
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Workqueue: raid5wq raid5_do_work
Call Trace:
<TASK>
dump_stack_lvl+0x5a/0x78
dump_stack+0x10/0x16
print_trailer+0x158/0x165
object_err+0x35/0x50
free_debug_processing.cold+0xb7/0xbe
__slab_free+0x1ae/0x330
kmem_cache_free+0x46d/0x490
mempool_free_slab+0x17/0x20
mempool_free+0x66/0x190
bio_free+0x78/0x90
bio_put+0x100/0x1a0
mpage_end_io+0x36/0x150
bio_endio+0x2fd/0x360
md_end_io_acct+0x7e/0x90
bio_endio+0x2fd/0x360
handle_failed_stripe+0x960/0xb80
handle_stripe+0x1348/0x3760
handle_active_stripes.constprop.0+0x72a/0xaf0
raid5_do_work+0x177/0x330
process_one_work+0x616/0xb20
worker_thread+0x2bd/0x6f0
kthread+0x179/0x1b0
ret_from_fork+0x22/0x30
</TASK>
The double free is caused by an unnecessary bio_put() in the
if(is_badblock(...)) error path in raid5_read_one_chunk().
The error path was moved ahead of bio_alloc_clone() in c82aa1b767
("md/raid5: move checking badblock before clone bio in
raid5_read_one_chunk"). The previous code checked and freed align_bio
which required a bio_put. After the move that is no longer needed as
raid_bio is returned to the control of the common io path which
performs its own endio resulting in a double free on bad device blocks.
Fixes: c82aa1b767 ("md/raid5: move checking badblock before clone bio in raid5_read_one_chunk")
Signed-off-by: David Sloan <david.sloan@eideticom.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Guoqing Jiang <Guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2eed85bc7 ]
When doing degrade/recover tests using the journal a kernel BUG
is hit at drivers/md/raid5.c:4381 in handle_parity_checks5():
BUG_ON(!test_bit(R5_UPTODATE, &dev->flags));
This was found to occur because handle_stripe_fill() was skipped
for stripes in the journal due to a condition in that function.
Thus blocks were not fetched and R5_UPTODATE was not set when
the code reached handle_parity_checks5().
To fix this, don't skip handle_stripe_fill() unless the stripe is
for read.
Fixes: 07e8336484 ("md/r5cache: shift complex rmw from read path to write path")
Link: https://lore.kernel.org/linux-raid/e05c4239-41a9-d2f7-3cfa-4aa9d2cea8c1@deltatee.com/
Suggested-by: Song Liu <song@kernel.org>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lin Yujun