Compare commits

...

496 Commits

Author SHA1 Message Date
Greg Kroah-Hartman 5776697784 Linux 5.2.3 2019-07-26 09:11:12 +02:00
Junxiao Bi b942dcdab8 dm bufio: fix deadlock with loop device
commit bd293d071f upstream.

When thin-volume is built on loop device, if available memory is low,
the following deadlock can be triggered:

One process P1 allocates memory with GFP_FS flag, direct alloc fails,
memory reclaim invokes memory shrinker in dm_bufio, dm_bufio_shrink_scan()
runs, mutex dm_bufio_client->lock is acquired, then P1 waits for dm_buffer
IO to complete in __try_evict_buffer().

But this IO may never complete if issued to an underlying loop device
that forwards it using direct-IO, which allocates memory using
GFP_KERNEL (see: do_blockdev_direct_IO()).  If allocation fails, memory
reclaim will invoke memory shrinker in dm_bufio, dm_bufio_shrink_scan()
will be invoked, and since the mutex is already held by P1 the loop
thread will hang, and IO will never complete.  Resulting in ABBA
deadlock.

Cc: stable@vger.kernel.org
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:11 +02:00
Mike Snitzer 8e4c803e7f dm thin metadata: check if in fail_io mode when setting needs_check
commit 54fa16ee53 upstream.

Check if in fail_io mode at start of dm_pool_metadata_set_needs_check().
Otherwise dm_pool_metadata_set_needs_check()'s superblock_lock() can
crash in dm_bm_write_lock() while accessing the block manager object
that was previously destroyed as part of a failed
dm_pool_abort_metadata() that ultimately set fail_io to begin with.

Also, update DMERR() message to more accurately describe
superblock_lock() failure.

Cc: stable@vger.kernel.org
Reported-by: Zdenek Kabelac <zkabelac@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:11 +02:00
Bjorn Andersson 71e19cde73 phy: qcom-qmp: Correct READY_STATUS poll break condition
commit 885bd76596 upstream.

After issuing a PHY_START request to the QMP, the hardware documentation
states that the software should wait for the PCS_READY_STATUS to become
1.

With the introduction of commit c9b589791f ("phy: qcom: Utilize UFS
reset controller") an additional 1ms delay was introduced between the
start request and the check of the status bit. This greatly increases
the chances for the hardware to actually becoming ready before the
status bit is read.

The result can be seen in that UFS PHY enabling is now reported as a
failure in 10% of the boots on SDM845, which is a clear regression from
the previous rare/occasional failure.

This patch fixes the "break condition" of the poll to check for the
correct state of the status bit.

Unfortunately PCIe on 8996 and 8998 does not specify the mask_pcs_ready
register, which means that the code checks a bit that's always 0. So the
patch also fixes these, in order to not regress these targets.

Fixes: 73d7ec899b ("phy: qcom-qmp: Add msm8998 PCIe QMP PHY support")
Fixes: e78f3d15e1 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets")
Cc: stable@vger.kernel.org
Cc: Evan Green <evgreen@chromium.org>
Cc: Marc Gonzalez <marc.w.gonzalez@free.fr>
Cc: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Tested-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:11 +02:00
Norbert Manthey 6f46c8c5d0 pstore: Fix double-free in pstore_mkfile() failure path
commit 4c6d80e114 upstream.

The pstore_mkfile() function is passed a pointer to a struct
pstore_record. On success it consumes this 'record' pointer and
references it from the created inode.

On failure, however, it may or may not free the record. There are even
two different code paths which return -ENOMEM -- one of which does and
the other doesn't free the record.

Make the behaviour deterministic by never consuming and freeing the
record when returning failure, allowing the caller to do the cleanup
consistently.

Signed-off-by: Norbert Manthey <nmanthey@amazon.de>
Link: https://lore.kernel.org/r/1562331960-26198-1-git-send-email-nmanthey@amazon.de
Fixes: 83f70f0769 ("pstore: Do not duplicate record metadata")
Fixes: 1dfff7dd67 ("pstore: Pass record contents instead of copying")
Cc: stable@vger.kernel.org
[kees: also move "private" allocation location, rename inode cleanup label]
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:11 +02:00
Josua Mayer e07f183303 dt-bindings: allow up to four clocks for orion-mdio
commit 80785f5a22 upstream.

Armada 8040 needs four clocks to be enabled for MDIO accesses to work.
Update the binding to allow the extra clock to be specified.

Cc: stable@vger.kernel.org
Fixes: 6d6a331f44 ("dt-bindings: allow up to three clocks for orion-mdio")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:11 +02:00
Josua Mayer f9559f00cb net: mvmdio: allow up to four clocks to be specified for orion-mdio
commit 4aabed699c upstream.

Allow up to four clocks to be specified and enabled for the orion-mdio
interface, which are required by the Armada 8k and defined in
armada-cp110.dtsi.

Fixes a hang in probing the mvmdio driver that was encountered on the
Clearfog GT 8K with all drivers built as modules, but also affects other
boards such as the MacchiatoBIN.

Cc: stable@vger.kernel.org
Fixes: 96cb434238 ("net: mvmdio: allow up to three clocks to be specified for orion-mdio")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:11 +02:00
Tejun Heo d483ea783a blkcg: update blkcg_print_stat() to handle larger outputs
commit f539da82f2 upstream.

Depending on the number of devices, blkcg stats can go over the
default seqfile buf size.  seqfile normally retries with a larger
buffer but since the ->pd_stat() addition, blkcg_print_stat() doesn't
tell seqfile that overflow has happened and the output gets printed
truncated.  Fix it by calling seq_commit() w/ -1 on possible
overflows.

Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 903d23f0a3 ("blk-cgroup: allow controllers to output their own stats")
Cc: stable@vger.kernel.org # v4.19+
Cc: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:11 +02:00
Tejun Heo c600458bb0 blk-iolatency: clear use_delay when io.latency is set to zero
commit 5de0073fcd upstream.

If use_delay was non-zero when the latency target of a cgroup was set
to zero, it will stay stuck until io.latency is enabled on the cgroup
again.  This keeps readahead disabled for the cgroup impacting
performance negatively.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Josef Bacik <jbacik@fb.com>
Fixes: d706751215 ("block: introduce blk-iolatency io controller")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:10 +02:00
Peng Fan 86ace02c80 clk: imx: imx8mm: correct audio_pll2_clk to audio_pll2_out
commit 5b933e28d8 upstream.

There is no audio_pll2_clk registered, it should be audio_pll2_out.

Cc: <stable@vger.kernel.org>
Fixes: ba5625c3e2 ("clk: imx: Add clock driver support for imx8mm")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:10 +02:00
Konstantin Khlebnikov a613a7957a blk-throttle: fix zero wait time for iops throttled group
commit 3a10f999ff upstream.

After commit 991f61fe7e ("Blk-throttle: reduce tail io latency when
iops limit is enforced") wait time could be zero even if group is
throttled and cannot issue requests right now. As a result
throtl_select_dispatch() turns into busy-loop under irq-safe queue
spinlock.

Fix is simple: always round up target time to the next throttle slice.

Fixes: 991f61fe7e ("Blk-throttle: reduce tail io latency when iops limit is enforced")
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:10 +02:00
Lee, Chiasheng 3201a60323 usb: Handle USB3 remote wakeup for LPM enabled devices correctly
commit e244c4699f upstream.

With Link Power Management (LPM) enabled USB3 links transition to low
power U1/U2 link states from U0 state automatically.

Current hub code detects USB3 remote wakeups by checking if the software
state still shows suspended, but the link has transitioned from suspended
U3 to enabled U0 state.

As it takes some time before the hub thread reads the port link state
after a USB3 wake notification, the link may have transitioned from U0
to U1/U2, and wake is not detected by hub code.

Fix this by handling U1/U2 states in the same way as U0 in USB3 wakeup
handling

This patch should be added to stable kernels since 4.13 where LPM was
kept enabled during suspend/resume

Cc: <stable@vger.kernel.org> # v4.13+
Signed-off-by: Lee, Chiasheng <chiasheng.lee@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:10 +02:00
Matthew Wilcox (Oracle) 111b055e43 dax: Fix missed wakeup with PMD faults
commit 23c84eb783 upstream.

RocksDB can hang indefinitely when using a DAX file.  This is due to
a bug in the XArray conversion when handling a PMD fault and finding a
PTE entry.  We use the wrong index in the hash and end up waiting on
the wrong waitqueue.

There's actually no need to wait; if we find a PTE entry while looking
for a PMD entry, we can return immediately as we know we should fall
back to a PTE fault (which may not conflict with the lock held).

We reuse the XA_RETRY_ENTRY to signal a conflicting entry was found.
This value can never be found in an XArray while holding its lock, so
it does not create an ambiguity.

Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/CAPcyv4hwHpX-MkUEqxwdTj7wCCZCN4RV-L4jsnuwLGyL_UEG4A@mail.gmail.com
Fixes: b15cd80068 ("dax: Convert page fault handlers to XArray")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Robert Barror <robert.barror@intel.com>
Reported-by: Seema Pandit <seema.pandit@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:10 +02:00
Szymon Janc bd2828a819 Bluetooth: Add SMP workaround Microsoft Surface Precision Mouse bug
commit 1d87b88ba2 upstream.

Microsoft Surface Precision Mouse provides bogus identity address when
pairing. It connects with Static Random address but provides Public
Address in SMP Identity Address Information PDU. Address has same
value but type is different. Workaround this by dropping IRK if ID
address discrepancy is detected.

> HCI Event: LE Meta Event (0x3e) plen 19
      LE Connection Complete (0x01)
        Status: Success (0x00)
        Handle: 75
        Role: Master (0x00)
        Peer address type: Random (0x01)
        Peer address: E0:52:33:93:3B:21 (Static)
        Connection interval: 50.00 msec (0x0028)
        Connection latency: 0 (0x0000)
        Supervision timeout: 420 msec (0x002a)
        Master clock accuracy: 0x00

....

> ACL Data RX: Handle 75 flags 0x02 dlen 12
      SMP: Identity Address Information (0x09) len 7
        Address type: Public (0x00)
        Address: E0:52:33:93:3B:21

Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Tested-by: Maarten Fonville <maarten.fonville@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199461
Cc: stable@vger.kernel.org
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:10 +02:00
Alexander Shishkin 58fae3632c intel_th: msu: Fix single mode with disabled IOMMU
commit 918b864649 upstream.

Commit 4e0eaf239f ("intel_th: msu: Fix single mode with IOMMU") switched
the single mode code to use dma mapping pages obtained from the page
allocator, but with IOMMU disabled, that may lead to using SWIOTLB bounce
buffers and without additional sync'ing, produces empty trace buffers.

Fix this by using a DMA32 GFP flag to the page allocation in single mode,
as the device supports full 32-bit DMA addressing.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Fixes: 4e0eaf239f ("intel_th: msu: Fix single mode with IOMMU")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: Ammy Yi <ammy.yi@intel.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190621161930.60785-4-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:10 +02:00
YueHaibing 320a36ce38 intel_th: msu: Remove set but not used variable 'last'
commit 9800db282d upstream.

Commit aad14ad3cf ("intel_th: msu: Add current window tracking") added
the following gcc warning:

> drivers/hwtracing/intel_th/msu.c: In function msc_win_switch:
> drivers/hwtracing/intel_th/msu.c:1389:21: warning: variable last set but
> not used [-Wunused-but-set-variable]

Fix it by removing the variable.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Fixes: aad14ad3cf ("intel_th: msu: Add current window tracking")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190621161930.60785-3-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:10 +02:00
liaoweixiong 13d7c7e75e mtd: spinand: read returns badly if the last page has bitflips
commit b83408b580 upstream.

In case of the last page containing bitflips (ret > 0),
spinand_mtd_read() will return that number of bitflips for the last
page while it should instead return max_bitflips like it does when the
last page read returns with 0.

Signed-off-by: Weixiong Liao <liaoweixiong@allwinnertech.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Cc: stable@vger.kernel.org
Fixes: 7529df4652 ("mtd: nand: Add core infrastructure to support SPI NANDs")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:09 +02:00
Xiaolei Li 6d1e846312 mtd: rawnand: mtk: Correct low level time calculation of r/w cycle
commit e1884ffdda upstream.

At present, the flow of calculating AC timing of read/write cycle in SDR
mode is that:
At first, calculate high hold time which is valid for both read and write
cycle using the max value between tREH_min and tWH_min.
Secondly, calculate WE# pulse width using tWP_min.
Thridly, calculate RE# pulse width using the bigger one between tREA_max
and tRP_min.

But NAND SPEC shows that Controller should also meet write/read cycle time.
That is write cycle time should be more than tWC_min and read cycle should
be more than tRC_min. Obviously, we do not achieve that now.

This patch corrects the low level time calculation to meet minimum
read/write cycle time required. After getting the high hold time, WE# low
level time will be promised to meet tWP_min and tWC_min requirement,
and RE# low level time will be promised to meet tREA_max, tRP_min and
tRC_min requirement.

Fixes: edfee3619c ("mtd: nand: mtk: add ->setup_data_interface() hook")
Cc: stable@vger.kernel.org # v4.17+
Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:09 +02:00
Dan Carpenter abbd63bf08 eCryptfs: fix a couple type promotion bugs
commit 0bdf8a8245 upstream.

ECRYPTFS_SIZE_AND_MARKER_BYTES is type size_t, so if "rc" is negative
that gets type promoted to a high positive value and treated as success.

Fixes: 778aeb42a7 ("eCryptfs: Cleanup and optimize ecryptfs_lookup_interpose()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[tyhicks: Use "if/else if" rather than "if/if"]
Cc: stable@vger.kernel.org
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:09 +02:00
Jorge Ramirez-Ortiz d7245d252f mmc: sdhci-msm: fix mutex while in spinlock
commit 5e6b6651d2 upstream.

mutexes can sleep and therefore should not be taken while holding a
spinlock. move clk_get_rate (can sleep) outside the spinlock protected
region.

Fixes: 83736352e0 ("mmc: sdhci-msm: Update DLL reset sequence")
Cc: stable@vger.kernel.org
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:09 +02:00
Nathan Lynch a63f2ef208 powerpc/pseries: Fix oops in hotplug memory notifier
commit 0aa82c482a upstream.

During post-migration device tree updates, we can oops in
pseries_update_drconf_memory() if the source device tree has an
ibm,dynamic-memory-v2 property and the destination has a
ibm,dynamic_memory (v1) property. The notifier processes an "update"
for the ibm,dynamic-memory property but it's really an add in this
scenario. So make sure the old property object is there before
dereferencing it.

Fixes: 2b31e3aec1 ("powerpc/drmem: Add support for ibm, dynamic-memory-v2 property")
Cc: stable@vger.kernel.org # v4.16+
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:09 +02:00
Greg Kurz dd29ff8324 powerpc/pseries: Fix xive=off command line
commit a3bf9fbdad upstream.

On POWER9, if the hypervisor supports XIVE exploitation mode, the
guest OS will unconditionally requests for the XIVE interrupt mode
even if XIVE was deactivated with the kernel command line xive=off.
Later on, when the spapr XIVE init code handles xive=off, it disables
XIVE and tries to fall back on the legacy mode XICS.

This discrepency causes a kernel panic because the hypervisor is
configured to provide the XIVE interrupt mode to the guest :

  kernel BUG at arch/powerpc/sysdev/xics/xics-common.c:135!
  ...
  NIP xics_smp_probe+0x38/0x98
  LR  xics_smp_probe+0x2c/0x98
  Call Trace:
    xics_smp_probe+0x2c/0x98 (unreliable)
    pSeries_smp_probe+0x40/0xa0
    smp_prepare_cpus+0x62c/0x6ec
    kernel_init_freeable+0x148/0x448
    kernel_init+0x2c/0x148
    ret_from_kernel_thread+0x5c/0x68

Look for xive=off during prom_init and don't ask for XIVE in this
case. One exception though: if the host only supports XIVE, we still
want to boot so we ignore xive=off.

Similarly, have the spapr XIVE init code to looking at the interrupt
mode negotiated during CAS, and ignore xive=off if the hypervisor only
supports XIVE.

Fixes: eac1e731b5 ("powerpc/xive: guest exploitation of the XIVE interrupt controller")
Cc: stable@vger.kernel.org # v4.20
Reported-by: Pavithra R. Prakash <pavrampu@in.ibm.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:09 +02:00
Alexey Kardashevskiy 8215001403 powerpc/powernv: Fix stale iommu table base after VFIO
commit 5636427d08 upstream.

The powernv platform uses @dma_iommu_ops for non-bypass DMA. These ops
need an iommu_table pointer which is stored in
dev->archdata.iommu_table_base. It is initialized during
pcibios_setup_device() which handles boot time devices. However when a
device is taken from the system in order to pass it through, the
default IOMMU table is destroyed but the pointer in a device is not
updated; also when a device is returned back to the system, a new
table pointer is not stored in dev->archdata.iommu_table_base either.
So when a just returned device tries using IOMMU, it crashes on
accessing stale iommu_table or its members.

This calls set_iommu_table_base() when the default window is created.
Note it used to be there before but was wrongly removed (see "fixes").
It did not appear before as these days most devices simply use bypass.

This adds set_iommu_table_base(NULL) when a device is taken from the
system to make it clear that IOMMU DMA cannot be used past that point.

Fixes: c4e9d3c1e6 ("powerpc/powernv/pseries: Rework device adding to IOMMU groups")
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:09 +02:00
Athira Rajeev d71acd3f40 powerpc/powernv/idle: Fix restore of SPRN_LDBAR for POWER9 stop state.
commit f5a9e488d6 upstream.

commit 10d91611f4 ("powerpc/64s: Reimplement book3s idle code in C")
reimplemented book3S code to pltform/powernv/idle.c. But when doing so
missed to add the per-thread LDBAR update in the core_woken path of
the power9_idle_stop(). Patch fixes the same.

Fixes: 10d91611f4 ("powerpc/64s: Reimplement book3s idle code in C")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190702105836.26695-1-maddy@linux.vnet.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:08 +02:00
Greg Kurz 03eccf2da6 powerpc/powernv/npu: Fix reference leak
commit 02c5f53949 upstream.

Since 902bdc5745, get_pci_dev() calls pci_get_domain_bus_and_slot(). This
has the effect of incrementing the reference count of the PCI device, as
explained in drivers/pci/search.c:

 * Given a PCI domain, bus, and slot/function number, the desired PCI
 * device is located in the list of PCI devices. If the device is
 * found, its reference count is increased and this function returns a
 * pointer to its data structure.  The caller must decrement the
 * reference count by calling pci_dev_put().  If no device is found,
 * %NULL is returned.

Nothing was done to call pci_dev_put() and the reference count of GPU and
NPU PCI devices rockets up.

A natural way to fix this would be to teach the callers about the change,
so that they call pci_dev_put() when done with the pointer. This turns
out to be quite intrusive, as it affects many paths in npu-dma.c,
pci-ioda.c and vfio_pci_nvlink2.c. Also, the issue appeared in 4.16 and
some affected code got moved around since then: it would be problematic
to backport the fix to stable releases.

All that code never cared for reference counting anyway. Call pci_dev_put()
from get_pci_dev() to revert to the previous behavior.

Fixes: 902bdc5745 ("powerpc/powernv/idoa: Remove unnecessary pcidev from pci_dn")
Cc: stable@vger.kernel.org # v4.16
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:08 +02:00
Ravi Bangoria 2df756cdaf powerpc/watchpoint: Restore NV GPRs while returning from exception
commit f474c28fbc upstream.

powerpc hardware triggers watchpoint before executing the instruction.
To make trigger-after-execute behavior, kernel emulates the
instruction. If the instruction is 'load something into non-volatile
register', exception handler should restore emulated register state
while returning back, otherwise there will be register state
corruption. eg, adding a watchpoint on a list can corrput the list:

  # cat /proc/kallsyms | grep kthread_create_list
  c00000000121c8b8 d kthread_create_list

Add watchpoint on kthread_create_list->prev:

  # perf record -e mem:0xc00000000121c8c0

Run some workload such that new kthread gets invoked. eg, I just
logged out from console:

  list_add corruption. next->prev should be prev (c000000001214e00), \
	but was c00000000121c8b8. (next=c00000000121c8b8).
  WARNING: CPU: 59 PID: 309 at lib/list_debug.c:25 __list_add_valid+0xb4/0xc0
  CPU: 59 PID: 309 Comm: kworker/59:0 Kdump: loaded Not tainted 5.1.0-rc7+ #69
  ...
  NIP __list_add_valid+0xb4/0xc0
  LR __list_add_valid+0xb0/0xc0
  Call Trace:
  __list_add_valid+0xb0/0xc0 (unreliable)
  __kthread_create_on_node+0xe0/0x260
  kthread_create_on_node+0x34/0x50
  create_worker+0xe8/0x260
  worker_thread+0x444/0x560
  kthread+0x160/0x1a0
  ret_from_kernel_thread+0x5c/0x70

List corruption happened because it uses 'load into non-volatile
register' instruction:

Snippet from __kthread_create_on_node:

  c000000000136be8:     addis   r29,r2,-19
  c000000000136bec:     ld      r29,31424(r29)
        if (!__list_add_valid(new, prev, next))
  c000000000136bf0:     mr      r3,r30
  c000000000136bf4:     mr      r5,r28
  c000000000136bf8:     mr      r4,r29
  c000000000136bfc:     bl      c00000000059a2f8 <__list_add_valid+0x8>

Register state from WARN_ON():

  GPR00: c00000000059a3a0 c000007ff23afb50 c000000001344e00 0000000000000075
  GPR04: 0000000000000000 0000000000000000 0000001852af8bc1 0000000000000000
  GPR08: 0000000000000001 0000000000000007 0000000000000006 00000000000004aa
  GPR12: 0000000000000000 c000007ffffeb080 c000000000137038 c000005ff62aaa00
  GPR16: 0000000000000000 0000000000000000 c000007fffbe7600 c000007fffbe7370
  GPR20: c000007fffbe7320 c000007fffbe7300 c000000001373a00 0000000000000000
  GPR24: fffffffffffffef7 c00000000012e320 c000007ff23afcb0 c000000000cb8628
  GPR28: c00000000121c8b8 c000000001214e00 c000007fef5b17e8 c000007fef5b17c0

Watchpoint hit at 0xc000000000136bec.

  addis   r29,r2,-19
   => r29 = 0xc000000001344e00 + (-19 << 16)
   => r29 = 0xc000000001214e00

  ld      r29,31424(r29)
   => r29 = *(0xc000000001214e00 + 31424)
   => r29 = *(0xc00000000121c8c0)

0xc00000000121c8c0 is where we placed a watchpoint and thus this
instruction was emulated by emulate_step. But because handle_dabr_fault
did not restore emulated register state, r29 still contains stale
value in above register state.

Fixes: 5aae8a5370 ("powerpc, hw_breakpoints: Implement hw_breakpoints for 64-bit server processors")
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: stable@vger.kernel.org # 2.6.36+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:08 +02:00
Andreas Schwab 9f6a2e40dc powerpc/mm/32s: fix condition that is always true
commit 46c2478af6 upstream.

Move a misplaced paren that makes the condition always true.

Fixes: 63b2bc6195 ("powerpc/mm/32s: Use BATs for STRICT_KERNEL_RWX")
Cc: stable@vger.kernel.org # v5.1+
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:08 +02:00
Christophe Leroy 1d2ee2a575 powerpc/32s: fix suspend/resume when IBATs 4-7 are used
commit 6ecb78ef56 upstream.

Previously, only IBAT1 and IBAT2 were used to map kernel linear mem.
Since commit 63b2bc6195 ("powerpc/mm/32s: Use BATs for
STRICT_KERNEL_RWX"), we may have all 8 BATs used for mapping
kernel text. But the suspend/restore functions only save/restore
BATs 0 to 3, and clears BATs 4 to 7.

Make suspend and restore functions respectively save and reload
the 8 BATs on CPUs having MMU_FTR_USE_HIGH_BATS feature.

Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:08 +02:00
Helge Deller fd0a712995 parisc: Fix kernel panic due invalid values in IAOQ0 or IAOQ1
commit 10835c8546 upstream.

On parisc the privilege level of a process is stored in the lowest two bits of
the instruction pointers (IAOQ0 and IAOQ1). On Linux we use privilege level 0
for the kernel and privilege level 3 for user-space. So userspace should not be
allowed to modify IAOQ0 or IAOQ1 of a ptraced process to change it's privilege
level to e.g. 0 to try to gain kernel privileges.

This patch prevents such modifications by always setting the two lowest bits to
one (which relates to privilege level 3 for user-space) if IAOQ0 or IAOQ1 are
modified via ptrace calls in the native and compat ptrace paths.

Link: https://bugs.gentoo.org/481768
Reported-by: Jeroen Roovers <jer@gentoo.org>
Cc: <stable@vger.kernel.org>
Tested-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:08 +02:00
Helge Deller 1ca14ff51d parisc: Avoid kernel panic triggered by invalid kprobe
commit 59a783dbc0 upstream.

When running gdb I was able to trigger this kernel panic:

 Kernel Fault: Code=26 (Data memory access rights trap) at addr 0000000000000060
 CPU: 0 PID: 1401 Comm: gdb-crash Not tainted 5.2.0-rc7-64bit+ #1053

      YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
 PSW: 00001000000001000000000000001111 Not tainted
 r00-03  000000000804000f 0000000040dee1a0 0000000040c78cf0 00000000b8d50160
 r04-07  0000000040d2b1a0 000000004360a098 00000000bbbe87b8 0000000000000003
 r08-11  00000000fac20a70 00000000fac24160 00000000fac1bbe0 0000000000000000
 r12-15  00000000fabfb79a 00000000fac244a4 0000000000010000 0000000000000001
 r16-19  00000000bbbe87b8 00000000f8f02910 0000000000010034 0000000000000000
 r20-23  00000000fac24630 00000000fac24630 000000006474e552 00000000fac1aa52
 r24-27  0000000000000028 00000000bbbe87b8 00000000bbbe87b8 0000000040d2b1a0
 r28-31  0000000000000000 00000000b8d501c0 00000000b8d501f0 0000000003424000
 sr00-03  0000000000423000 0000000000000000 0000000000000000 0000000000423000
 sr04-07  0000000000000000 0000000000000000 0000000000000000 0000000000000000

 IASQ: 0000000000000000 0000000000000000 IAOQ: 0000000040c78cf0 0000000040c78cf4
  IIR: 539f00c0    ISR: 0000000000000000  IOR: 0000000000000060
  CPU:        0   CR30: 00000000b8d50000 CR31: 00000000d22345e2
  ORIG_R28: 0000000040250798
  IAOQ[0]: parisc_kprobe_ss_handler+0x58/0x170
  IAOQ[1]: parisc_kprobe_ss_handler+0x5c/0x170
  RP(r2): parisc_kprobe_ss_handler+0x58/0x170
 Backtrace:
  [<0000000040206ff8>] handle_interruption+0x178/0xbb8
 Kernel panic - not syncing: Kernel Fault

Avoid this panic by checking the return value of kprobe_running() and
skip kprobe if none is currently active.

Cc: <stable@vger.kernel.org> # v5.2
Acked-by: Sven Schnelle <svens@stackframe.org>
Tested-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:08 +02:00
Helge Deller 325d2d7eed parisc: Ensure userspace privilege for ptraced processes in regset functions
commit 34c32fc603 upstream.

On parisc the privilege level of a process is stored in the lowest two bits of
the instruction pointers (IAOQ0 and IAOQ1). On Linux we use privilege level 0
for the kernel and privilege level 3 for user-space. So userspace should not be
allowed to modify IAOQ0 or IAOQ1 of a ptraced process to change it's privilege
level to e.g. 0 to try to gain kernel privileges.

This patch prevents such modifications in the regset support functions by
always setting the two lowest bits to one (which relates to privilege level 3
for user-space) if IAOQ0 or IAOQ1 are modified via ptrace regset calls.

Link: https://bugs.gentoo.org/481768
Cc: <stable@vger.kernel.org> # v4.7+
Tested-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:07 +02:00
Steve Longerbeam c40ecbe1f6 gpu: ipu-v3: ipu-ic: Fix saturation bit offset in TPMEM
commit 3d1f62c686 upstream.

The saturation bit was being set at bit 9 in the second 32-bit word
of the TPMEM CSC. This isn't correct, the saturation bit is bit 42,
which is bit 10 of the second word.

Fixes: 1aa8ea0d2b ("gpu: ipu-v3: Add Image Converter unit")

Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:07 +02:00
Nadav Amit 1bbf2811db resource: fix locking in find_next_iomem_res()
commit 49f17c26c1 upstream.

Since resources can be removed, locking should ensure that the resource
is not removed while accessing it.  However, find_next_iomem_res() does
not hold the lock while copying the data of the resource.

Keep holding the lock while the data is copied.  While at it, change the
return value to a more informative value.  It is disregarded by the
callers.

[akpm@linux-foundation.org: fix find_next_iomem_res() documentation]
Link: http://lkml.kernel.org/r/20190613045903.4922-2-namit@vmware.com
Fixes: ff3cc952d3 ("resource: Add remove_resource interface")
Signed-off-by: Nadav Amit <namit@vmware.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:07 +02:00
Drew Davenport 866981b4d4 include/asm-generic/bug.h: fix "cut here" for WARN_ON for __WARN_TAINT architectures
commit 6b15f678fb upstream.

For architectures using __WARN_TAINT, the WARN_ON macro did not print
out the "cut here" string.  The other WARN_XXX macros would print "cut
here" inside __warn_printk, which is not called for WARN_ON since it
doesn't have a message to print.

Link: http://lkml.kernel.org/r/20190624154831.163888-1-ddavenport@chromium.org
Fixes: a7bed27af1 ("bug: fix "cut here" location for __WARN_TAINT architectures")
Signed-off-by: Drew Davenport <ddavenport@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:07 +02:00
Jan Harkes c8ab9aafa6 coda: pass the host file in vma->vm_file on mmap
commit 7fa0a1da3d upstream.

Patch series "Coda updates".

The following patch series is a collection of various fixes for Coda,
most of which were collected from linux-fsdevel or linux-kernel but
which have as yet not found their way upstream.

This patch (of 22):

Various file systems expect that vma->vm_file points at their own file
handle, several use file_inode(vma->vm_file) to get at their inode or
use vma->vm_file->private_data.  However the way Coda wrapped mmap on a
host file broke this assumption, vm_file was still pointing at the Coda
file and the host file systems would scribble over Coda's inode and
private file data.

This patch fixes the incorrect expectation and wraps vm_ops->open and
vm_ops->close to allow Coda to track when the vm_area_struct is
destroyed so we still release the reference on the Coda file handle at
the right time.

Link: http://lkml.kernel.org/r/0e850c6e59c0b147dc2dcd51a3af004c948c3697.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:07 +02:00
Henry Burns 6d468c7832 mm/z3fold.c: lock z3fold page before __SetPageMovable()
commit 810481a246 upstream.

Following zsmalloc.c's example we call trylock_page() and unlock_page().
Also make z3fold_page_migrate() assert that newpage is passed in locked,
as per the documentation.

[akpm@linux-foundation.org: fix trylock_page return value test, per Shakeel]
Link: http://lkml.kernel.org/r/20190702005122.41036-1-henryburns@google.com
Link: http://lkml.kernel.org/r/20190702233538.52793-1-henryburns@google.com
Signed-off-by: Henry Burns <henryburns@google.com>
Suggested-by: Vitaly Wool <vitalywool@gmail.com>
Acked-by: Vitaly Wool <vitalywool@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Vitaly Vul <vitaly.vul@sony.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Xidong Wang <wangxidong_97@163.com>
Cc: Jonathan Adams <jwadams@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:07 +02:00
Yafang Shao 83822dc2de mm/memcontrol: fix wrong statistics in memory.stat
commit dd9239900e upstream.

When we calculate total statistics for memcg1_stats and memcg1_events,
we use the the index 'i' in the for loop as the events index.  Actually
we should use memcg1_stats[i] and memcg1_events[i] as the events index.

Link: http://lkml.kernel.org/r/1562116978-19539-1-git-send-email-laoar.shao@gmail.com
Fixes: 42a3003535 ("mm: memcontrol: fix recursive statistics correctness & scalabilty").
Signed-off-by: Yafang Shao <laoar.shao@gmail.com
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Yafang Shao <shaoyafang@didiglobal.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:06 +02:00
Dan Williams b60f290bc0 libnvdimm/pfn: fix fsdax-mode namespace info-block zero-fields
commit 7e3e888dfc upstream.

At namespace creation time there is the potential for the "expected to
be zero" fields of a 'pfn' info-block to be filled with indeterminate
data.  While the kernel buffer is zeroed on allocation it is immediately
overwritten by nd_pfn_validate() filling it with the current contents of
the on-media info-block location.  For fields like, 'flags' and the
'padding' it potentially means that future implementations can not rely on
those fields being zero.

In preparation to stop using the 'start_pad' and 'end_trunc' fields for
section alignment, arrange for fields that are not explicitly
initialized to be guaranteed zero.  Bump the minor version to indicate
it is safe to assume the 'padding' and 'flags' are zero.  Otherwise,
this corruption is expected to benign since all other critical fields
are explicitly initialized.

Note The cc: stable is about spreading this new policy to as many
kernels as possible not fixing an issue in those kernels.  It is not
until the change titled "libnvdimm/pfn: Stop padding pmem namespaces to
section alignment" where this improper initialization becomes a problem.
So if someone decides to backport "libnvdimm/pfn: Stop padding pmem
namespaces to section alignment" (which is not tagged for stable), make
sure this pre-requisite is flagged.

Link: http://lkml.kernel.org/r/156092356065.979959.6681003754765958296.stgit@dwillia2-desk3.amr.corp.intel.com
Fixes: 32ab0a3f51 ("libnvdimm, pmem: 'struct page' for pmem")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>	[ppc64]
Cc: <stable@vger.kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:06 +02:00
Aneesh Kumar K.V 8a75019214 mm/nvdimm: add is_ioremap_addr and use that to check ioremap address
commit 9bd3bb6703 upstream.

Architectures like powerpc use different address range to map ioremap
and vmalloc range.  The memunmap() check used by the nvdimm layer was
wrongly using is_vmalloc_addr() to check for ioremap range which fails
for ppc64.  This result in ppc64 not freeing the ioremap mapping.  The
side effect of this is an unbind failure during module unload with
papr_scm nvdimm driver

Link: http://lkml.kernel.org/r/20190701134038.14165-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Fixes: b5beae5e22 ("powerpc/pseries: Add driver for PAPR SCM regions")
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:06 +02:00
Kuo-Hsin Yang cc01bc548e mm: vmscan: scan anonymous pages on file refaults
commit 2c012a4ad1 upstream.

When file refaults are detected and there are many inactive file pages,
the system never reclaim anonymous pages, the file pages are dropped
aggressively when there are still a lot of cold anonymous pages and
system thrashes.  This issue impacts the performance of applications
with large executable, e.g.  chrome.

With this patch, when file refault is detected, inactive_list_is_low()
always returns true for file pages in get_scan_count() to enable
scanning anonymous pages.

The problem can be reproduced by the following test program.

---8<---
void fallocate_file(const char *filename, off_t size)
{
	struct stat st;
	int fd;

	if (!stat(filename, &st) && st.st_size >= size)
		return;

	fd = open(filename, O_WRONLY | O_CREAT, 0600);
	if (fd < 0) {
		perror("create file");
		exit(1);
	}
	if (posix_fallocate(fd, 0, size)) {
		perror("fallocate");
		exit(1);
	}
	close(fd);
}

long *alloc_anon(long size)
{
	long *start = malloc(size);
	memset(start, 1, size);
	return start;
}

long access_file(const char *filename, long size, long rounds)
{
	int fd, i;
	volatile char *start1, *end1, *start2;
	const int page_size = getpagesize();
	long sum = 0;

	fd = open(filename, O_RDONLY);
	if (fd == -1) {
		perror("open");
		exit(1);
	}

	/*
	 * Some applications, e.g. chrome, use a lot of executable file
	 * pages, map some of the pages with PROT_EXEC flag to simulate
	 * the behavior.
	 */
	start1 = mmap(NULL, size / 2, PROT_READ | PROT_EXEC, MAP_SHARED,
		      fd, 0);
	if (start1 == MAP_FAILED) {
		perror("mmap");
		exit(1);
	}
	end1 = start1 + size / 2;

	start2 = mmap(NULL, size / 2, PROT_READ, MAP_SHARED, fd, size / 2);
	if (start2 == MAP_FAILED) {
		perror("mmap");
		exit(1);
	}

	for (i = 0; i < rounds; ++i) {
		struct timeval before, after;
		volatile char *ptr1 = start1, *ptr2 = start2;
		gettimeofday(&before, NULL);
		for (; ptr1 < end1; ptr1 += page_size, ptr2 += page_size)
			sum += *ptr1 + *ptr2;
		gettimeofday(&after, NULL);
		printf("File access time, round %d: %f (sec)
", i,
		       (after.tv_sec - before.tv_sec) +
		       (after.tv_usec - before.tv_usec) / 1000000.0);
	}
	return sum;
}

int main(int argc, char *argv[])
{
	const long MB = 1024 * 1024;
	long anon_mb, file_mb, file_rounds;
	const char filename[] = "large";
	long *ret1;
	long ret2;

	if (argc != 4) {
		printf("usage: thrash ANON_MB FILE_MB FILE_ROUNDS
");
		exit(0);
	}
	anon_mb = atoi(argv[1]);
	file_mb = atoi(argv[2]);
	file_rounds = atoi(argv[3]);

	fallocate_file(filename, file_mb * MB);
	printf("Allocate %ld MB anonymous pages
", anon_mb);
	ret1 = alloc_anon(anon_mb * MB);
	printf("Access %ld MB file pages
", file_mb);
	ret2 = access_file(filename, file_mb * MB, file_rounds);
	printf("Print result to prevent optimization: %ld
",
	       *ret1 + ret2);
	return 0;
}
---8<---

Running the test program on 2GB RAM VM with kernel 5.2.0-rc5, the program
fills ram with 2048 MB memory, access a 200 MB file for 10 times.  Without
this patch, the file cache is dropped aggresively and every access to the
file is from disk.

  $ ./thrash 2048 200 10
  Allocate 2048 MB anonymous pages
  Access 200 MB file pages
  File access time, round 0: 2.489316 (sec)
  File access time, round 1: 2.581277 (sec)
  File access time, round 2: 2.487624 (sec)
  File access time, round 3: 2.449100 (sec)
  File access time, round 4: 2.420423 (sec)
  File access time, round 5: 2.343411 (sec)
  File access time, round 6: 2.454833 (sec)
  File access time, round 7: 2.483398 (sec)
  File access time, round 8: 2.572701 (sec)
  File access time, round 9: 2.493014 (sec)

With this patch, these file pages can be cached.

  $ ./thrash 2048 200 10
  Allocate 2048 MB anonymous pages
  Access 200 MB file pages
  File access time, round 0: 2.475189 (sec)
  File access time, round 1: 2.440777 (sec)
  File access time, round 2: 2.411671 (sec)
  File access time, round 3: 1.955267 (sec)
  File access time, round 4: 0.029924 (sec)
  File access time, round 5: 0.000808 (sec)
  File access time, round 6: 0.000771 (sec)
  File access time, round 7: 0.000746 (sec)
  File access time, round 8: 0.000738 (sec)
  File access time, round 9: 0.000747 (sec)

Checked the swap out stats during the test [1], 19006 pages swapped out
with this patch, 3418 pages swapped out without this patch. There are
more swap out, but I think it's within reasonable range when file backed
data set doesn't fit into the memory.

$ ./thrash 2000 100 2100 5 1 # ANON_MB FILE_EXEC FILE_NOEXEC ROUNDS
PROCESSES Allocate 2000 MB anonymous pages active_anon: 1613644,
inactive_anon: 348656, active_file: 892, inactive_file: 1384 (kB)
pswpout: 7972443, pgpgin: 478615246 Access 100 MB executable file pages
Access 2100 MB regular file pages File access time, round 0: 12.165,
(sec) active_anon: 1433788, inactive_anon: 478116, active_file: 17896,
inactive_file: 24328 (kB) File access time, round 1: 11.493, (sec)
active_anon: 1430576, inactive_anon: 477144, active_file: 25440,
inactive_file: 26172 (kB) File access time, round 2: 11.455, (sec)
active_anon: 1427436, inactive_anon: 476060, active_file: 21112,
inactive_file: 28808 (kB) File access time, round 3: 11.454, (sec)
active_anon: 1420444, inactive_anon: 473632, active_file: 23216,
inactive_file: 35036 (kB) File access time, round 4: 11.479, (sec)
active_anon: 1413964, inactive_anon: 471460, active_file: 31728,
inactive_file: 32224 (kB) pswpout: 7991449 (+ 19006), pgpgin: 489924366
(+ 11309120)

With 4 processes accessing non-overlapping parts of a large file, 30316
pages swapped out with this patch, 5152 pages swapped out without this
patch.  The swapout number is small comparing to pgpgin.

[1]: https://github.com/vovo/testing/blob/master/mem_thrash.c

Link: http://lkml.kernel.org/r/20190701081038.GA83398@google.com
Fixes: e986850598 ("mm,vmscan: only evict file pages when we have plenty")
Fixes: 7c5bd705d8 ("mm: memcg: only evict file pages when we have plenty")
Signed-off-by: Kuo-Hsin Yang <vovoy@chromium.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Sonny Rao <sonnyrao@chromium.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org>	[4.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:06 +02:00
Aaron Armstrong Skomra dd3239bb3b HID: wacom: correct touch resolution x/y typo
commit 68c20cc216 upstream.

This affects the 2nd-gen Intuos Pro Medium and Large
when using their Bluetooth connection.

Fixes: 4922cd26f0 ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface")
Cc: <stable@vger.kernel.org> # v4.11+
Signed-off-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:06 +02:00
Aaron Armstrong Skomra f43f71434c HID: wacom: generic: Correct pad syncing
commit d4b8efeb46 upstream.

Only sync the pad once per report, not once per collection.
Also avoid syncing the pad on battery reports.

Fixes: f8b6a74719 ("HID: wacom: generic: Support multiple tools per report")
Cc: <stable@vger.kernel.org> # v4.17+
Signed-off-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:06 +02:00
Aaron Armstrong Skomra ccd4669967 HID: wacom: generic: only switch the mode on devices with LEDs
commit d8e9806005 upstream.

Currently, the driver will attempt to set the mode on all
devices with a center button, but some devices with a center
button lack LEDs, and attempting to set the LEDs on devices
without LEDs results in the kernel error message of the form:

"leds input8::wacom-0.1: Setting an LED's brightness failed (-32)"

This is because the generic codepath erroneously assumes that the
BUTTON_CENTER usage indicates that the device has LEDs, the
previously ignored TOUCH_RING_SETTING usage is a more accurate
indication of the existence of LEDs on the device.

Fixes: 10c55cacb8 ("HID: wacom: generic: support LEDs")
Cc: <stable@vger.kernel.org> # v4.11+
Signed-off-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:05 +02:00
Danit Goldberg 44ecea8be4 IB/mlx5: Report correctly tag matching rendezvous capability
commit 89705e9270 upstream.

Userspace expects the IB_TM_CAP_RC bit to indicate that the device
supports RC transport tag matching with rendezvous offload. However the
firmware splits this into two capabilities for eager and rendezvous tag
matching.

Only if the FW supports both modes should userspace be told the tag
matching capability is available.

Cc: <stable@vger.kernel.org> # 4.13
Fixes: eb76189435 ("IB/mlx5: Fill XRQ capabilities")
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:05 +02:00
Filipe Manana b6a0d03dd4 Btrfs: add missing inode version, ctime and mtime updates when punching hole
commit 179006688a upstream.

If the range for which we are punching a hole covers only part of a page,
we end up updating the inode item but we skip the update of the inode's
iversion, mtime and ctime. Fix that by ensuring we update those properties
of the inode.

A patch for fstests test case generic/059 that tests this as been sent
along with this fix.

Fixes: 2aaa665581 ("Btrfs: add hole punching")
Fixes: e8c1c76e80 ("Btrfs: add missing inode update when punching hole")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:05 +02:00
Filipe Manana 24ae804edf Btrfs: fix fsync not persisting dentry deletions due to inode evictions
commit 803f0f64d1 upstream.

In order to avoid searches on a log tree when unlinking an inode, we check
if the inode being unlinked was logged in the current transaction, as well
as the inode of its parent directory. When any of the inodes are logged,
we proceed to delete directory items and inode reference items from the
log, to ensure that if a subsequent fsync of only the inode being unlinked
or only of the parent directory when the other is not fsync'ed as well,
does not result in the entry still existing after a power failure.

That check however is not reliable when one of the inodes involved (the
one being unlinked or its parent directory's inode) is evicted, since the
logged_trans field is transient, that is, it is not stored on disk, so it
is lost when the inode is evicted and loaded into memory again (which is
set to zero on load). As a consequence the checks currently being done by
btrfs_del_dir_entries_in_log() and btrfs_del_inode_ref_in_log() always
return true if the inode was evicted before, regardless of the inode
having been logged or not before (and in the current transaction), this
results in the dentry being unlinked still existing after a log replay
if after the unlink operation only one of the inodes involved is fsync'ed.

Example:

  $ mkfs.btrfs -f /dev/sdb
  $ mount /dev/sdb /mnt

  $ mkdir /mnt/dir
  $ touch /mnt/dir/foo
  $ xfs_io -c fsync /mnt/dir/foo

  # Keep an open file descriptor on our directory while we evict inodes.
  # We just want to evict the file's inode, the directory's inode must not
  # be evicted.
  $ ( cd /mnt/dir; while true; do :; done ) &
  $ pid=$!

  # Wait a bit to give time to background process to chdir to our test
  # directory.
  $ sleep 0.5

  # Trigger eviction of the file's inode.
  $ echo 2 > /proc/sys/vm/drop_caches

  # Unlink our file and fsync the parent directory. After a power failure
  # we don't expect to see the file anymore, since we fsync'ed the parent
  # directory.
  $ rm -f $SCRATCH_MNT/dir/foo
  $ xfs_io -c fsync /mnt/dir

  <power failure>

  $ mount /dev/sdb /mnt
  $ ls /mnt/dir
  foo
  $
   --> file still there, unlink not persisted despite explicit fsync on dir

Fix this by checking if the inode has the full_sync bit set in its runtime
flags as well, since that bit is set everytime an inode is loaded from
disk, or for other less common cases such as after a shrinking truncate
or failure to allocate extent maps for holes, and gets cleared after the
first fsync. Also consider the inode as possibly logged only if it was
last modified in the current transaction (besides having the full_fsync
flag set).

Fixes: 3a5f1d458a ("Btrfs: Optimize btree walking while logging inodes")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:05 +02:00
Filipe Manana 12e58c1b44 Btrfs: fix data loss after inode eviction, renaming it, and fsync it
commit d1d832a0b5 upstream.

When we log an inode, regardless of logging it completely or only that it
exists, we always update it as logged (logged_trans and last_log_commit
fields of the inode are updated). This is generally fine and avoids future
attempts to log it from having to do repeated work that brings no value.

However, if we write data to a file, then evict its inode after all the
dealloc was flushed (and ordered extents completed), rename the file and
fsync it, we end up not logging the new extents, since the rename may
result in logging that the inode exists in case the parent directory was
logged before. The following reproducer shows and explains how this can
happen:

  $ mkfs.btrfs -f /dev/sdb
  $ mount /dev/sdb /mnt

  $ mkdir /mnt/dir
  $ touch /mnt/dir/foo
  $ touch /mnt/dir/bar

  # Do a direct IO write instead of a buffered write because with a
  # buffered write we would need to make sure dealloc gets flushed and
  # complete before we do the inode eviction later, and we can not do that
  # from user space with call to things such as sync(2) since that results
  # in a transaction commit as well.
  $ xfs_io -d -c "pwrite -S 0xd3 0 4K" /mnt/dir/bar

  # Keep the directory dir in use while we evict inodes. We want our file
  # bar's inode to be evicted but we don't want our directory's inode to
  # be evicted (if it were evicted too, we would not be able to reproduce
  # the issue since the first fsync below, of file foo, would result in a
  # transaction commit.
  $ ( cd /mnt/dir; while true; do :; done ) &
  $ pid=$!

  # Wait a bit to give time for the background process to chdir.
  $ sleep 0.1

  # Evict all inodes, except the inode for the directory dir because it is
  # currently in use by our background process.
  $ echo 2 > /proc/sys/vm/drop_caches

  # fsync file foo, which ends up persisting information about the parent
  # directory because it is a new inode.
  $ xfs_io -c fsync /mnt/dir/foo

  # Rename bar, this results in logging that this inode exists (inode item,
  # names, xattrs) because the parent directory is in the log.
  $ mv /mnt/dir/bar /mnt/dir/baz

  # Now fsync baz, which ends up doing absolutely nothing because of the
  # rename operation which logged that the inode exists only.
  $ xfs_io -c fsync /mnt/dir/baz

  <power failure>

  $ mount /dev/sdb /mnt
  $ od -t x1 -A d /mnt/dir/baz
  0000000

    --> Empty file, data we wrote is missing.

Fix this by not updating last_sub_trans of an inode when we are logging
only that it exists and the inode was not yet logged since it was loaded
from disk (full_sync bit set), this is enough to make btrfs_inode_in_log()
return false for this scenario and make us log the inode. The logged_trans
of the inode is still always setsince that alone is used to track if names
need to be deleted as part of unlink operations.

Fixes: 257c62e1bc ("Btrfs: avoid tree log commit when there are no changes")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:05 +02:00
Johannes Thumshirn ced88769e6 btrfs: correctly validate compression type
commit aa53e3bfac upstream.

Nikolay reported the following KASAN splat when running btrfs/048:

[ 1843.470920] ==================================================================
[ 1843.471971] BUG: KASAN: slab-out-of-bounds in strncmp+0x66/0xb0
[ 1843.472775] Read of size 1 at addr ffff888111e369e2 by task btrfs/3979

[ 1843.473904] CPU: 3 PID: 3979 Comm: btrfs Not tainted 5.2.0-rc3-default #536
[ 1843.475009] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 1843.476322] Call Trace:
[ 1843.476674]  dump_stack+0x7c/0xbb
[ 1843.477132]  ? strncmp+0x66/0xb0
[ 1843.477587]  print_address_description+0x114/0x320
[ 1843.478256]  ? strncmp+0x66/0xb0
[ 1843.478740]  ? strncmp+0x66/0xb0
[ 1843.479185]  __kasan_report+0x14e/0x192
[ 1843.479759]  ? strncmp+0x66/0xb0
[ 1843.480209]  kasan_report+0xe/0x20
[ 1843.480679]  strncmp+0x66/0xb0
[ 1843.481105]  prop_compression_validate+0x24/0x70
[ 1843.481798]  btrfs_xattr_handler_set_prop+0x65/0x160
[ 1843.482509]  __vfs_setxattr+0x71/0x90
[ 1843.483012]  __vfs_setxattr_noperm+0x84/0x130
[ 1843.483606]  vfs_setxattr+0xac/0xb0
[ 1843.484085]  setxattr+0x18c/0x230
[ 1843.484546]  ? vfs_setxattr+0xb0/0xb0
[ 1843.485048]  ? __mod_node_page_state+0x1f/0xa0
[ 1843.485672]  ? _raw_spin_unlock+0x24/0x40
[ 1843.486233]  ? __handle_mm_fault+0x988/0x1290
[ 1843.486823]  ? lock_acquire+0xb4/0x1e0
[ 1843.487330]  ? lock_acquire+0xb4/0x1e0
[ 1843.487842]  ? mnt_want_write_file+0x3c/0x80
[ 1843.488442]  ? debug_lockdep_rcu_enabled+0x22/0x40
[ 1843.489089]  ? rcu_sync_lockdep_assert+0xe/0x70
[ 1843.489707]  ? __sb_start_write+0x158/0x200
[ 1843.490278]  ? mnt_want_write_file+0x3c/0x80
[ 1843.490855]  ? __mnt_want_write+0x98/0xe0
[ 1843.491397]  __x64_sys_fsetxattr+0xba/0xe0
[ 1843.492201]  ? trace_hardirqs_off_thunk+0x1a/0x1c
[ 1843.493201]  do_syscall_64+0x6c/0x230
[ 1843.493988]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1843.495041] RIP: 0033:0x7fa7a8a7707a
[ 1843.495819] Code: 48 8b 0d 21 de 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 be 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ee dd 2b 00 f7 d8 64 89 01 48
[ 1843.499203] RSP: 002b:00007ffcb73bca38 EFLAGS: 00000202 ORIG_RAX: 00000000000000be
[ 1843.500210] RAX: ffffffffffffffda RBX: 00007ffcb73bda9d RCX: 00007fa7a8a7707a
[ 1843.501170] RDX: 00007ffcb73bda9d RSI: 00000000006dc050 RDI: 0000000000000003
[ 1843.502152] RBP: 00000000006dc050 R08: 0000000000000000 R09: 0000000000000000
[ 1843.503109] R10: 0000000000000002 R11: 0000000000000202 R12: 00007ffcb73bda91
[ 1843.504055] R13: 0000000000000003 R14: 00007ffcb73bda82 R15: ffffffffffffffff

[ 1843.505268] Allocated by task 3979:
[ 1843.505771]  save_stack+0x19/0x80
[ 1843.506211]  __kasan_kmalloc.constprop.5+0xa0/0xd0
[ 1843.506836]  setxattr+0xeb/0x230
[ 1843.507264]  __x64_sys_fsetxattr+0xba/0xe0
[ 1843.507886]  do_syscall_64+0x6c/0x230
[ 1843.508429]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

[ 1843.509558] Freed by task 0:
[ 1843.510188] (stack is not available)

[ 1843.511309] The buggy address belongs to the object at ffff888111e369e0
                which belongs to the cache kmalloc-8 of size 8
[ 1843.514095] The buggy address is located 2 bytes inside of
                8-byte region [ffff888111e369e0, ffff888111e369e8)
[ 1843.516524] The buggy address belongs to the page:
[ 1843.517561] page:ffff88813f478d80 refcount:1 mapcount:0 mapping:ffff88811940c300 index:0xffff888111e373b8 compound_mapcount: 0
[ 1843.519993] flags: 0x4404000010200(slab|head)
[ 1843.520951] raw: 0004404000010200 ffff88813f48b008 ffff888119403d50 ffff88811940c300
[ 1843.522616] raw: ffff888111e373b8 000000000016000f 00000001ffffffff 0000000000000000
[ 1843.524281] page dumped because: kasan: bad access detected

[ 1843.525936] Memory state around the buggy address:
[ 1843.526975]  ffff888111e36880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.528479]  ffff888111e36900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.530138] >ffff888111e36980: fc fc fc fc fc fc fc fc fc fc fc fc 02 fc fc fc
[ 1843.531877]                                                        ^
[ 1843.533287]  ffff888111e36a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.534874]  ffff888111e36a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.536468] ==================================================================

This is caused by supplying a too short compression value ('lz') in the
test-case and comparing it to 'lzo' with strncmp() and a length of 3.
strncmp() read past the 'lz' when looking for the 'o' and thus caused an
out-of-bounds read.

Introduce a new check 'btrfs_compress_is_valid_type()' which not only
checks the user-supplied value against known compression types, but also
employs checks for too short values.

Reported-by: Nikolay Borisov <nborisov@suse.com>
Fixes: 272e5326c7 ("btrfs: prop: fix vanished compression property after failed set")
CC: stable@vger.kernel.org # 5.1+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:05 +02:00
Niklas Cassel af2efb6466 PCI: qcom: Ensure that PERST is asserted for at least 100 ms
commit 64adde31c8 upstream.

Currently, there is only a 1 ms sleep after asserting PERST.

Reading the datasheets for different endpoints, some require PERST to be
asserted for 10 ms in order for the endpoint to perform a reset, others
require it to be asserted for 50 ms.

Several SoCs using this driver uses PCIe Mini Card, where we don't know
what endpoint will be plugged in.

The PCI Express Card Electromechanical Specification r2.0, section
2.2, "PERST# Signal" specifies:

"On power up, the deassertion of PERST# is delayed 100 ms (TPVPERL) from
the power rails achieving specified operating limits."

Add a sleep of 100 ms before deasserting PERST, in order to ensure that
we are compliant with the spec.

Fixes: 82a823833f ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: stable@vger.kernel.org # 4.5+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:05 +02:00
Mika Westerberg 3530d286c1 PCI: Do not poll for PME if the device is in D3cold
commit 000dd5316e upstream.

PME polling does not take into account that a device that is directly
connected to the host bridge may go into D3cold as well. This leads to a
situation where the PME poll thread reads from a config space of a
device that is in D3cold and gets incorrect information because the
config space is not accessible.

Here is an example from Intel Ice Lake system where two PCIe root ports
are in D3cold (I've instrumented the kernel to log the PMCSR register
contents):

  [   62.971442] pcieport 0000:00:07.1: Check PME status, PMCSR=0xffff
  [   62.971504] pcieport 0000:00:07.0: Check PME status, PMCSR=0xffff

Since 0xffff is interpreted so that PME is pending, the root ports will
be runtime resumed. This repeats over and over again essentially
blocking all runtime power management.

Prevent this from happening by checking whether the device is in D3cold
before its PME status is read.

Fixes: 71a83bd727 ("PCI/PM: add runtime PM support to PCIe port")
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: 3.6+ <stable@vger.kernel.org> # v3.6+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:04 +02:00
Dexuan Cui 45c91514e6 PCI: hv: Fix a use-after-free bug in hv_eject_device_work()
commit 4df591b20b upstream.

Fix a use-after-free in hv_eject_device_work().

Fixes: 05f151a73e ("PCI: hv: Fix a memory leak in hv_eject_device_work()")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:04 +02:00
Alexander Shishkin 48f48d3e69 intel_th: pci: Add Ice Lake NNPI support
commit 4aa5aed2b6 upstream.

This adds Ice Lake NNPI support to the Intel(R) Trace Hub.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190621161930.60785-5-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:04 +02:00
Jason Gunthorpe 45d2dde958 RDMA/odp: Fix missed unlock in non-blocking invalidate_start
commit 7608bf40cf upstream.

If invalidate_start returns with EAGAIN then the umem_rwsem needs to be
unlocked as no invalidate_end will be called.

Cc: <stable@vger.kernel.org>
Fixes: ca748c39ea ("RDMA/umem: Get rid of per_mm->notifier_count")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:04 +02:00
Bart Van Assche 6b0c68827b RDMA/srp: Accept again source addresses that do not have a port number
commit bcef5b7215 upstream.

The function srp_parse_in() is used both for parsing source address
specifications and for target address specifications. Target addresses
must have a port number. Having to specify a port number for source
addresses is inconvenient. Make sure that srp_parse_in() supports again
parsing addresses with no port number.

Cc: <stable@vger.kernel.org>
Fixes: c62adb7def ("IB/srp: Fix IPv6 address parsing")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:04 +02:00
Damien Le Moal b80e370c0c block: Fix potential overflow in blk_report_zones()
commit 113ab72ed4 upstream.

For large values of the number of zones reported and/or large zone
sizes, the sector increment calculated with

blk_queue_zone_sectors(q) * n

in blk_report_zones() loop can overflow the unsigned int type used for
the calculation as both "n" and blk_queue_zone_sectors() value are
unsigned int. E.g. for a device with 256 MB zones (524288 sectors),
overflow happens with 8192 or more zones reported.

Changing the return type of blk_queue_zone_sectors() to sector_t, fixes
this problem and avoids overflow problem for all other callers of this
helper too. The same change is also applied to the bdev_zone_sectors()
helper.

Fixes: e76239a374 ("block: add a report_zones method")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:04 +02:00
Damien Le Moal 72ac05ce26 block: Allow mapping of vmalloc-ed buffers
commit b4c5875d36 upstream.

To allow the SCSI subsystem scsi_execute_req() function to issue
requests using large buffers that are better allocated with vmalloc()
rather than kmalloc(), modify bio_map_kern() to allow passing a buffer
allocated with vmalloc().

To do so, detect vmalloc-ed buffers using is_vmalloc_addr(). For
vmalloc-ed buffers, flush the buffer using flush_kernel_vmap_range(),
use vmalloc_to_page() instead of virt_to_page() to obtain the pages of
the buffer, and invalidate the buffer addresses with
invalidate_kernel_vmap_range() on completion of read BIOs. This last
point is executed using the function bio_invalidate_vmalloc_pages()
which is defined only if the architecture defines
ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE, that is, if the architecture
actually needs the invalidation done.

Fixes: 515ce60613 ("scsi: sd_zbc: Fix sd_zbc_report_zones() buffer allocation")
Fixes: e76239a374 ("block: add a report_zones method")
Cc: stable@vger.kernel.org
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:03 +02:00
Andres Rodriguez 0a71cb0fb4 drm/edid: parse CEA blocks embedded in DisplayID
commit e28ad544f4 upstream.

DisplayID blocks allow embedding of CEA blocks. The payloads are
identical to traditional top level CEA extension blocks, but the header
is slightly different.

This change allows the CEA parser to find a CEA block inside a DisplayID
block. Additionally, it adds support for parsing the embedded CTA
header. No further changes are necessary due to payload parity.

This change fixes audio support for the Valve Index HMD.

Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.15
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619180901.17901-1-andresx7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:03 +02:00
Eiichi Tsukata 4f216eb095 x86/stacktrace: Prevent infinite loop in arch_stack_walk_user()
commit cbf5b73d16 upstream.

arch_stack_walk_user() checks `if (fp == frame.next_fp)` to prevent a
infinite loop by self reference but it's not enogh for circular reference.

Once a lack of return address is found, there is no point to continue the
loop, so break out.

Fixes: 02b67518e2 ("tracing: add support for userspace stacktraces in tracing/iter_ctrl")
Signed-off-by: Eiichi Tsukata <devel@etsukata.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lkml.kernel.org/r/20190711023501.963-1-devel@etsukata.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:03 +02:00
Kim Phillips e00f7c6343 perf/x86/amd/uncore: Set the thread mask for F17h L3 PMCs
commit 2f217d58a8 upstream.

Fill in the L3 performance event select register ThreadMask
bitfield, to enable per hardware thread accounting.

Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Gary Hook <Gary.Hook@amd.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Liska <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pu Wen <puwen@hygon.cn>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lkml.kernel.org/r/20190628215906.4276-2-kim.phillips@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:03 +02:00
Kim Phillips b867946623 perf/x86/amd/uncore: Do not set 'ThreadMask' and 'SliceMask' for non-L3 PMCs
commit 16f4641166 upstream.

The following commit:

  d7cbbe49a9 ("perf/x86/amd/uncore: Set ThreadMask and SliceMask for L3 Cache perf events")

enables L3 PMC events for all threads and slices by writing 1's in
'ChL3PmcCfg' (L3 PMC PERF_CTL) register fields.

Those bitfields overlap with high order event select bits in the Data
Fabric PMC control register, however.

So when a user requests raw Data Fabric events (-e amd_df/event=0xYYY/),
the two highest order bits get inadvertently set, changing the counter
select to events that don't exist, and for which no counts are read.

This patch changes the logic to write the L3 masks only when dealing
with L3 PMC counters.

AMD Family 16h and below Northbridge (NB) counters were not affected.

Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Gary Hook <Gary.Hook@amd.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Liska <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pu Wen <puwen@hygon.cn>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: d7cbbe49a9 ("perf/x86/amd/uncore: Set ThreadMask and SliceMask for L3 Cache perf events")
Link: https://lkml.kernel.org/r/20190628215906.4276-1-kim.phillips@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:03 +02:00
Kan Liang e078b94f21 perf/x86/intel: Fix spurious NMI on fixed counter
commit e4557c1a46 upstream.

If a user first sample a PEBS event on a fixed counter, then sample a
non-PEBS event on the same fixed counter on Icelake, it will trigger
spurious NMI. For example:

  perf record -e 'cycles:p' -a
  perf record -e 'cycles' -a

The error message for spurious NMI:

  [June 21 15:38] Uhhuh. NMI received for unknown reason 30 on CPU 2.
  [    +0.000000] Do you have a strange power saving mode enabled?
  [    +0.000000] Dazed and confused, but trying to continue

The bug was introduced by the following commit:

  commit 6f55967ad9 ("perf/x86/intel: Fix race in intel_pmu_disable_event()")

The commit moves the intel_pmu_pebs_disable() after intel_pmu_disable_fixed(),
which returns immediately.  The related bit of PEBS_ENABLE MSR will never be
cleared for the fixed counter. Then a non-PEBS event runs on the fixed counter,
but the bit on PEBS_ENABLE is still set, which triggers spurious NMIs.

Check and disable PEBS for fixed counters after intel_pmu_disable_fixed().

Reported-by: Yi, Ammy <ammy.yi@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: <stable@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: 6f55967ad9 ("perf/x86/intel: Fix race in intel_pmu_disable_event()")
Link: https://lkml.kernel.org/r/20190625142135.22112-1-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:03 +02:00
David Rientjes 9a0d1e1fc8 x86/boot: Fix memory leak in default_get_smp_config()
commit e74bd96989 upstream.

When default_get_smp_config() is called with early == 1 and mpf->feature1
is non-zero, mpf is leaked because the return path does not do
early_memunmap().

Fix this and share a common exit routine.

Fixes: 5997efb967 ("x86/boot: Use memremap() to map the MPF and MPC data")
Reported-by: Cfir Cohen <cfir@google.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1907091942570.28240@chino.kir.corp.google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:03 +02:00
Dexuan Cui a717a5bdf4 x86/hyper-v: Zero out the VP ASSIST PAGE on allocation
commit e320ab3cec upstream.

The VP ASSIST PAGE is an "overlay" page (see Hyper-V TLFS's Section
5.2.1 "GPA Overlay Pages" for the details) and here is an excerpt:

"The hypervisor defines several special pages that "overlay" the guest's
 Guest Physical Addresses (GPA) space. Overlays are addressed GPA but are
 not included in the normal GPA map maintained internally by the hypervisor.
 Conceptually, they exist in a separate map that overlays the GPA map.

 If a page within the GPA space is overlaid, any SPA page mapped to the
 GPA page is effectively "obscured" and generally unreachable by the
 virtual processor through processor memory accesses.

 If an overlay page is disabled, the underlying GPA page is "uncovered",
 and an existing mapping becomes accessible to the guest."

SPA = System Physical Address = the final real physical address.

When a CPU (e.g. CPU1) is onlined, hv_cpu_init() allocates the VP ASSIST
PAGE and enables the EOI optimization for this CPU by writing the MSR
HV_X64_MSR_VP_ASSIST_PAGE. From now on, hvp->apic_assist belongs to the
special SPA page, and this CPU *always* uses hvp->apic_assist (which is
shared with the hypervisor) to decide if it needs to write the EOI MSR.

When a CPU is offlined then on the outgoing CPU:
1. hv_cpu_die() disables the EOI optimizaton for this CPU, and from
   now on hvp->apic_assist belongs to the original "normal" SPA page;
2. the remaining work of stopping this CPU is done
3. this CPU is completely stopped.

Between 1 and 3, this CPU can still receive interrupts (e.g. reschedule
IPIs from CPU0, and Local APIC timer interrupts), and this CPU *must* write
the EOI MSR for every interrupt received, otherwise the hypervisor may not
deliver further interrupts, which may be needed to completely stop the CPU.

So, after the EOI optimization is disabled in hv_cpu_die(), it's required
that the hvp->apic_assist's bit0 is zero, which is not guaranteed by the
current allocation mode because it lacks __GFP_ZERO. As a consequence the
bit might be set and interrupt handling would not write the EOI MSR causing
interrupt delivery to become stuck.

Add the missing __GFP_ZERO to the allocation.

Note 1: after the "normal" SPA page is allocted and zeroed out, neither the
hypervisor nor the guest writes into the page, so the page remains with
zeros.

Note 2: see Section 10.3.5 "EOI Assist" for the details of the EOI
optimization. When the optimization is enabled, the guest can still write
the EOI MSR register irrespective of the "No EOI required" value, but
that's slower than the optimized assist based variant.

Fixes: ba696429d2 ("x86/hyper-v: Implement EOI assist")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/ <PU1P153MB0169B716A637FABF07433C04BFCB0@PU1P153MB0169.APCP153.PROD.OUTLOOK.COM
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:03 +02:00
Soeren Moch 26f111d5b4 rt2x00usb: fix rx queue hang
commit 41a531ffa4 upstream.

Since commit ed194d1367 ("usb: core: remove local_irq_save() around
 ->complete() handler") the handler rt2x00usb_interrupt_rxdone() is
not running with interrupts disabled anymore. So this completion handler
is not guaranteed to run completely before workqueue processing starts
for the same queue entry.
Be sure to set all other flags in the entry correctly before marking
this entry ready for workqueue processing. This way we cannot miss error
conditions that need to be signalled from the completion handler to the
worker thread.
Note that rt2x00usb_work_rxdone() processes all available entries, not
only such for which queue_work() was called.

This patch is similar to what commit df71c9cfce ("rt2x00: fix order
of entry flags modification") did for TX processing.

This fixes a regression on a RT5370 based wifi stick in AP mode, which
suddenly stopped data transmission after some period of heavy load. Also
stopping the hanging hostapd resulted in the error message "ieee80211
phy0: rt2x00queue_flush_queue: Warning - Queue 14 failed to flush".
Other operation modes are probably affected as well, this just was
the used testcase.

Fixes: ed194d1367 ("usb: core: remove local_irq_save() around ->complete() handler")
Cc: stable@vger.kernel.org # 4.20+
Signed-off-by: Soeren Moch <smoch@web.de>
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:02 +02:00
YueHaibing 1e635a53f3 9p/virtio: Add cleanup path in p9_virtio_init
commit d4548543fc upstream.

KASAN report this:

BUG: unable to handle kernel paging request at ffffffffa0097000
PGD 3870067 P4D 3870067 PUD 3871063 PMD 2326e2067 PTE 0
Oops: 0000 [#1
CPU: 0 PID: 5340 Comm: modprobe Not tainted 5.1.0-rc7+ #25
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:__list_add_valid+0x10/0x70
Code: c3 48 8b 06 55 48 89 e5 5d 48 39 07 0f 94 c0 0f b6 c0 c3 90 90 90 90 90 90 90 55 48 89 d0 48 8b 52 08 48 89 e5 48 39 f2 75 19 <48> 8b 32 48 39 f0 75 3a

RSP: 0018:ffffc90000e23c68 EFLAGS: 00010246
RAX: ffffffffa00ad000 RBX: ffffffffa009d000 RCX: 0000000000000000
RDX: ffffffffa0097000 RSI: ffffffffa0097000 RDI: ffffffffa009d000
RBP: ffffc90000e23c68 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffa0097000
R13: ffff888231797180 R14: 0000000000000000 R15: ffffc90000e23e78
FS:  00007fb215285540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa0097000 CR3: 000000022f144000 CR4: 00000000000006f0
Call Trace:
 v9fs_register_trans+0x2f/0x60 [9pnet
 ? 0xffffffffa0087000
 p9_virtio_init+0x25/0x1000 [9pnet_virtio
 do_one_initcall+0x6c/0x3cc
 ? kmem_cache_alloc_trace+0x248/0x3b0
 do_init_module+0x5b/0x1f1
 load_module+0x1db1/0x2690
 ? m_show+0x1d0/0x1d0
 __do_sys_finit_module+0xc5/0xd0
 __x64_sys_finit_module+0x15/0x20
 do_syscall_64+0x6b/0x1d0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7fb214d8e839
Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01

RSP: 002b:00007ffc96554278 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000055e67eed2aa0 RCX: 00007fb214d8e839
RDX: 0000000000000000 RSI: 000055e67ce95c2e RDI: 0000000000000003
RBP: 000055e67ce95c2e R08: 0000000000000000 R09: 000055e67eed2aa0
R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000
R13: 000055e67eeda500 R14: 0000000000040000 R15: 000055e67eed2aa0
Modules linked in: 9pnet_virtio(+) 9pnet gre rfkill vmw_vsock_virtio_transport_common vsock [last unloaded: 9pnet_virtio
CR2: ffffffffa0097000
---[ end trace 4a52bb13ff07b761

If register_virtio_driver() fails in p9_virtio_init,
we should call v9fs_unregister_trans() to do cleanup.

Link: http://lkml.kernel.org/r/20190430115942.41840-1-yuehaibing@huawei.com
Cc: stable@vger.kernel.org
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: b530cc7940 ("9p: add virtio transport")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:02 +02:00
YueHaibing 13e6ba7257 9p/xen: Add cleanup path in p9_trans_xen_init
commit 80a316ff16 upstream.

If xenbus_register_frontend() fails in p9_trans_xen_init,
we should call v9fs_unregister_trans() to do cleanup.

Link: http://lkml.kernel.org/r/20190430143933.19368-1-yuehaibing@huawei.com
Cc: stable@vger.kernel.org
Fixes: 868eb12273 ("xen/9pfs: introduce Xen 9pfs transport driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:02 +02:00
Juergen Gross bd98e000f6 xen/events: fix binding user event channels to cpus
commit bce5963bcb upstream.

When binding an interdomain event channel to a vcpu via
IOCTL_EVTCHN_BIND_INTERDOMAIN not only the event channel needs to be
bound, but the affinity of the associated IRQi must be changed, too.
Otherwise the IRQ and the event channel won't be moved to another vcpu
in case the original vcpu they were bound to is going offline.

Cc: <stable@vger.kernel.org> # 4.13
Fixes: c48f64ab47 ("xen-evtchn: Bind dyn evtchn:qemu-dm interrupt to next online VCPU")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:02 +02:00
Damien Le Moal 8ef6682c1a dm zoned: fix zone state management race
commit 3b8cafdd54 upstream.

dm-zoned uses the zone flag DMZ_ACTIVE to indicate that a zone of the
backend device is being actively read or written and so cannot be
reclaimed. This flag is set as long as the zone atomic reference
counter is not 0. When this atomic is decremented and reaches 0 (e.g.
on BIO completion), the active flag is cleared and set again whenever
the zone is reused and BIO issued with the atomic counter incremented.
These 2 operations (atomic inc/dec and flag set/clear) are however not
always executed atomically under the target metadata mutex lock and
this causes the warning:

WARN_ON(!test_bit(DMZ_ACTIVE, &zone->flags));

in dmz_deactivate_zone() to be displayed. This problem is regularly
triggered with xfstests generic/209, generic/300, generic/451 and
xfs/077 with XFS being used as the file system on the dm-zoned target
device. Similarly, xfstests ext4/303, ext4/304, generic/209 and
generic/300 trigger the warning with ext4 use.

This problem can be easily fixed by simply removing the DMZ_ACTIVE flag
and managing the "ACTIVE" state by directly looking at the reference
counter value. To do so, the functions dmz_activate_zone() and
dmz_deactivate_zone() are changed to inline functions respectively
calling atomic_inc() and atomic_dec(), while the dmz_is_active() macro
is changed to an inline function calling atomic_read().

Fixes: 3b1a94c88b ("dm zoned: drive-managed zoned block device target")
Cc: stable@vger.kernel.org
Reported-by: Masato Suzuki <masato.suzuki@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:02 +02:00
Daniel Jordan 90b50060fe padata: use smp_mb in padata_reorder to avoid orphaned padata jobs
commit cf144f81a9 upstream.

Testing padata with the tcrypt module on a 5.2 kernel...

    # modprobe tcrypt alg="pcrypt(rfc4106(gcm(aes)))" type=3
    # modprobe tcrypt mode=211 sec=1

...produces this splat:

    INFO: task modprobe:10075 blocked for more than 120 seconds.
          Not tainted 5.2.0-base+ #16
    modprobe        D    0 10075  10064 0x80004080
    Call Trace:
     ? __schedule+0x4dd/0x610
     ? ring_buffer_unlock_commit+0x23/0x100
     schedule+0x6c/0x90
     schedule_timeout+0x3b/0x320
     ? trace_buffer_unlock_commit_regs+0x4f/0x1f0
     wait_for_common+0x160/0x1a0
     ? wake_up_q+0x80/0x80
     { crypto_wait_req }             # entries in braces added by hand
     { do_one_aead_op }
     { test_aead_jiffies }
     test_aead_speed.constprop.17+0x681/0xf30 [tcrypt]
     do_test+0x4053/0x6a2b [tcrypt]
     ? 0xffffffffa00f4000
     tcrypt_mod_init+0x50/0x1000 [tcrypt]
     ...

The second modprobe command never finishes because in padata_reorder,
CPU0's load of reorder_objects is executed before the unlocking store in
spin_unlock_bh(pd->lock), causing CPU0 to miss CPU1's increment:

CPU0                                 CPU1

padata_reorder                       padata_do_serial
  LOAD reorder_objects  // 0
                                       INC reorder_objects  // 1
                                       padata_reorder
                                         TRYLOCK pd->lock   // failed
  UNLOCK pd->lock

CPU0 deletes the timer before returning from padata_reorder and since no
other job is submitted to padata, modprobe waits indefinitely.

Add a pair of full barriers to guarantee proper ordering:

CPU0                                 CPU1

padata_reorder                       padata_do_serial
  UNLOCK pd->lock
  smp_mb()
  LOAD reorder_objects
                                       INC reorder_objects
                                       smp_mb__after_atomic()
                                       padata_reorder
                                         TRYLOCK pd->lock

smp_mb__after_atomic is needed so the read part of the trylock operation
comes after the INC, as Andrea points out.   Thanks also to Andrea for
help with writing a litmus test.

Fixes: 16295bec63 ("padata: Generic parallelization/serialization interface")
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: <stable@vger.kernel.org>
Cc: Andrea Parri <andrea.parri@amarulasolutions.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:02 +02:00
Lyude Paul 082d7e3acc drm/nouveau/i2c: Enable i2c pads & busses during preinit
commit 7cb95eeea6 upstream.

It turns out that while disabling i2c bus access from software when the
GPU is suspended was a step in the right direction with:

commit 342406e4fb ("drm/nouveau/i2c: Disable i2c bus access after
->fini()")

We also ended up accidentally breaking the vbios init scripts on some
older Tesla GPUs, as apparently said scripts can actually use the i2c
bus. Since these scripts are executed before initializing any
subdevices, we end up failing to acquire access to the i2c bus which has
left a number of cards with their fan controllers uninitialized. Luckily
this doesn't break hardware - it just means the fan gets stuck at 100%.

This also means that we've always been using our i2c busses before
initializing them during the init scripts for older GPUs, we just didn't
notice it until we started preventing them from being used until init.
It's pretty impressive this never caused us any issues before!

So, fix this by initializing our i2c pad and busses during subdev
pre-init. We skip initializing aux busses during pre-init, as those are
guaranteed to only ever be used by nouveau for DP aux transactions.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Tested-by: Marc Meledandri <m.meledandri@gmail.com>
Fixes: 342406e4fb ("drm/nouveau/i2c: Disable i2c bus access after ->fini()")
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:02 +02:00
Linus Walleij 237997e7ad ARM: dts: gemini: Set DIR-685 SPI CS as active low
commit f90b8fda3a upstream.

The SPI to the display on the DIR-685 is active low, we were
just saved by the SPI library enforcing active low on everything
before, so set it as active low to avoid ambiguity.

Link: https://lore.kernel.org/r/20190715202101.16060-1-linus.walleij@linaro.org
Cc: stable@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:01 +02:00
Vitor Soares 76e1c730e6 i3c: fix i2c and i3c scl rate by bus mode
commit ecc8fb54bd upstream.

Currently the I3C framework limits SCL frequency to FM speed when
dealing with a mixed slow bus, even if all I2C devices are FM+ capable.

The core was also not accounting for I3C speed limitations when
operating in mixed slow mode and was erroneously using FM+ speed as the
max I2C speed when operating in mixed fast mode.

Fixes: 3a379bbcea ("i3c: Add core I3C infrastructure")
Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: <stable@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:01 +02:00
Radoslaw Burny 14cc90952c fs/proc/proc_sysctl.c: fix the default values of i_uid/i_gid on /proc/sys inodes.
commit 5ec27ec735 upstream.

Normally, the inode's i_uid/i_gid are translated relative to s_user_ns,
but this is not a correct behavior for proc.  Since sysctl permission
check in test_perm is done against GLOBAL_ROOT_[UG]ID, it makes more
sense to use these values in u_[ug]id of proc inodes.  In other words:
although uid/gid in the inode is not read during test_perm, the inode
logically belongs to the root of the namespace.  I have confirmed this
with Eric Biederman at LPC and in this thread:
  https://lore.kernel.org/lkml/87k1kzjdff.fsf@xmission.com

Consequences
============

Since the i_[ug]id values of proc nodes are not used for permissions
checks, this change usually makes no functional difference.  However, it
causes an issue in a setup where:

 * a namespace container is created without root user in container -
   hence the i_[ug]id of proc nodes are set to INVALID_[UG]ID

 * container creator tries to configure it by writing /proc/sys files,
   e.g. writing /proc/sys/kernel/shmmax to configure shared memory limit

Kernel does not allow to open an inode for writing if its i_[ug]id are
invalid, making it impossible to write shmmax and thus - configure the
container.

Using a container with no root mapping is apparently rare, but we do use
this configuration at Google.  Also, we use a generic tool to configure
the container limits, and the inability to write any of them causes a
failure.

History
=======

The invalid uids/gids in inodes first appeared due to 8175435777 (fs:
Update i_[ug]id_(read|write) to translate relative to s_user_ns).
However, AFAIK, this did not immediately cause any issues.  The
inability to write to these "invalid" inodes was only caused by a later
commit 0bd23d09b8 (vfs: Don't modify inodes with a uid or gid unknown
to the vfs).

Tested: Used a repro program that creates a user namespace without any
mapping and stat'ed /proc/$PID/root/proc/sys/kernel/shmmax from outside.
Before the change, it shows the overflow uid, with the change it's 0.
The overflow uid indicates that the uid in the inode is not correct and
thus it is not possible to open the file for writing.

Link: http://lkml.kernel.org/r/20190708115130.250149-1-rburny@google.com
Fixes: 0bd23d09b8 ("vfs: Don't modify inodes with a uid or gid unknown to the vfs")
Signed-off-by: Radoslaw Burny <rburny@google.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Seth Forshee <seth.forshee@canonical.com>
Cc: John Sperbeck <jsperbeck@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: <stable@vger.kernel.org>	[4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:01 +02:00
Eric W. Biederman 2f0e9eed11 signal: Correct namespace fixups of si_pid and si_uid
commit 7a0cf09494 upstream.

The function send_signal was split from __send_signal so that it would
be possible to bypass the namespace logic based upon current[1].  As it
turns out the si_pid and the si_uid fixup are both inappropriate in
the case of kill_pid_usb_asyncio so move that logic into send_signal.

It is difficult to arrange but possible for a signal with an si_code
of SI_TIMER or SI_SIGIO to be sent across namespace boundaries.  In
which case tests for when it is ok to change si_pid and si_uid based
on SI_FROMUSER are incorrect.  Replace the use of SI_FROMUSER with a
new test has_si_pid_and_used based on siginfo_layout.

Now that the uid fixup is no longer present after expanding
SEND_SIG_NOINFO properly calculate the si_uid that the target
task needs to read.

[1] 7978b567d3 ("signals: add from_ancestor_ns parameter to send_signal()")
Cc: stable@vger.kernel.org
Fixes: 6588c1e3ff ("signals: SI_USER: Masquerade si_pid when crossing pid ns boundary")
Fixes: 6b550f9495 ("user namespace: make signal.c respect user namespaces")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:01 +02:00
Eric W. Biederman 1852befc68 signal/usb: Replace kill_pid_info_as_cred with kill_pid_usb_asyncio
commit 70f1b0d34b upstream.

The usb support for asyncio encoded one of it's values in the wrong
field.  It should have used si_value but instead used si_addr which is
not present in the _rt union member of struct siginfo.

The practical result of this is that on a 64bit big endian kernel
when delivering a signal to a 32bit process the si_addr field
is set to NULL, instead of the expected pointer value.

This issue can not be fixed in copy_siginfo_to_user32 as the usb
usage of the the _sigfault (aka si_addr) member of the siginfo
union when SI_ASYNCIO is set is incompatible with the POSIX and
glibc usage of the _rt member of the siginfo union.

Therefore replace kill_pid_info_as_cred with kill_pid_usb_asyncio a
dedicated function for this one specific case.  There are no other
users of kill_pid_info_as_cred so this specialization should have no
impact on the amount of code in the kernel.  Have kill_pid_usb_asyncio
take instead of a siginfo_t which is difficult and error prone, 3
arguments, a signal number, an errno value, and an address enconded as
a sigval_t.  The encoding of the address as a sigval_t allows the
code that reads the userspace request for a signal to handle this
compat issue along with all of the other compat issues.

Add BUILD_BUG_ONs in kernel/signal.c to ensure that we can now place
the pointer value at the in si_pid (instead of si_addr).  That is the
code now verifies that si_pid and si_addr always occur at the same
location.  Further the code veries that for native structures a value
placed in si_pid and spilling into si_uid will appear in userspace in
si_addr (on a byte by byte copy of siginfo or a field by field copy of
siginfo).  The code also verifies that for a 64bit kernel and a 32bit
userspace the 32bit pointer will fit in si_pid.

I have used the usbsig.c program below written by Alan Stern and
slightly tweaked by me to run on a big endian machine to verify the
issue exists (on sparc64) and to confirm the patch below fixes the issue.

 /* usbsig.c -- test USB async signal delivery */

 #define _GNU_SOURCE
 #include <stdio.h>
 #include <fcntl.h>
 #include <signal.h>
 #include <string.h>
 #include <sys/ioctl.h>
 #include <unistd.h>
 #include <endian.h>
 #include <linux/usb/ch9.h>
 #include <linux/usbdevice_fs.h>

 static struct usbdevfs_urb urb;
 static struct usbdevfs_disconnectsignal ds;
 static volatile sig_atomic_t done = 0;

 void urb_handler(int sig, siginfo_t *info , void *ucontext)
 {
 	printf("Got signal %d, signo %d errno %d code %d addr: %p urb: %p\n",
 	       sig, info->si_signo, info->si_errno, info->si_code,
 	       info->si_addr, &urb);

 	printf("%s\n", (info->si_addr == &urb) ? "Good" : "Bad");
 }

 void ds_handler(int sig, siginfo_t *info , void *ucontext)
 {
 	printf("Got signal %d, signo %d errno %d code %d addr: %p ds: %p\n",
 	       sig, info->si_signo, info->si_errno, info->si_code,
 	       info->si_addr, &ds);

 	printf("%s\n", (info->si_addr == &ds) ? "Good" : "Bad");
 	done = 1;
 }

 int main(int argc, char **argv)
 {
 	char *devfilename;
 	int fd;
 	int rc;
 	struct sigaction act;
 	struct usb_ctrlrequest *req;
 	void *ptr;
 	char buf[80];

 	if (argc != 2) {
 		fprintf(stderr, "Usage: usbsig device-file-name\n");
 		return 1;
 	}

 	devfilename = argv[1];
 	fd = open(devfilename, O_RDWR);
 	if (fd == -1) {
 		perror("Error opening device file");
 		return 1;
 	}

 	act.sa_sigaction = urb_handler;
 	sigemptyset(&act.sa_mask);
 	act.sa_flags = SA_SIGINFO;

 	rc = sigaction(SIGUSR1, &act, NULL);
 	if (rc == -1) {
 		perror("Error in sigaction");
 		return 1;
 	}

 	act.sa_sigaction = ds_handler;
 	sigemptyset(&act.sa_mask);
 	act.sa_flags = SA_SIGINFO;

 	rc = sigaction(SIGUSR2, &act, NULL);
 	if (rc == -1) {
 		perror("Error in sigaction");
 		return 1;
 	}

 	memset(&urb, 0, sizeof(urb));
 	urb.type = USBDEVFS_URB_TYPE_CONTROL;
 	urb.endpoint = USB_DIR_IN | 0;
 	urb.buffer = buf;
 	urb.buffer_length = sizeof(buf);
 	urb.signr = SIGUSR1;

 	req = (struct usb_ctrlrequest *) buf;
 	req->bRequestType = USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE;
 	req->bRequest = USB_REQ_GET_DESCRIPTOR;
 	req->wValue = htole16(USB_DT_DEVICE << 8);
 	req->wIndex = htole16(0);
 	req->wLength = htole16(sizeof(buf) - sizeof(*req));

 	rc = ioctl(fd, USBDEVFS_SUBMITURB, &urb);
 	if (rc == -1) {
 		perror("Error in SUBMITURB ioctl");
 		return 1;
 	}

 	rc = ioctl(fd, USBDEVFS_REAPURB, &ptr);
 	if (rc == -1) {
 		perror("Error in REAPURB ioctl");
 		return 1;
 	}

 	memset(&ds, 0, sizeof(ds));
 	ds.signr = SIGUSR2;
 	ds.context = &ds;
 	rc = ioctl(fd, USBDEVFS_DISCSIGNAL, &ds);
 	if (rc == -1) {
 		perror("Error in DISCSIGNAL ioctl");
 		return 1;
 	}

 	printf("Waiting for usb disconnect\n");
 	while (!done) {
 		sleep(1);
 	}

 	close(fd);
 	return 0;
 }

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Oliver Neukum <oneukum@suse.com>
Fixes: v2.3.39
Cc: stable@vger.kernel.org
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:01 +02:00
Shaokun Zhang e7afbfb309 intel_th: msu: Fix unused variable warning on arm64 platform
commit b96fb368b0 upstream.

Commit ba39bd8306 ("intel_th: msu: Switch over to scatterlist")
introduced the following warnings on non-x86 architectures, as a result
of reordering the multi mode buffer allocation sequence:

> drivers/hwtracing/intel_th/msu.c: In function ‘msc_buffer_win_alloc’:
> drivers/hwtracing/intel_th/msu.c:783:21: warning: unused variable ‘i’
> [-Wunused-variable]
> int ret = -ENOMEM, i;
>                    ^
> drivers/hwtracing/intel_th/msu.c: In function ‘msc_buffer_win_free’:
> drivers/hwtracing/intel_th/msu.c:863:6: warning: unused variable ‘i’
> [-Wunused-variable]
> int i;
>     ^

Fix this compiler warning by factoring out set_memory sequences and making
them x86-only.

Suggested-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Fixes: ba39bd8306 ("intel_th: msu: Switch over to scatterlist")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190621161930.60785-2-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:01 +02:00
Julien Thierry 96495465fd arm64: Fix incorrect irqflag restore for priority masking
commit bd82d4bd21 upstream.

When using IRQ priority masking to disable interrupts, in order to deal
with the PSR.I state, local_irq_save() would convert the I bit into a
PMR value (GIC_PRIO_IRQOFF). This resulted in local_irq_restore()
potentially modifying the value of PMR in undesired location due to the
state of PSR.I upon flag saving [1].

In an attempt to solve this issue in a less hackish manner, introduce
a bit (GIC_PRIO_IGNORE_PMR) for the PMR values that can represent
whether PSR.I is being used to disable interrupts, in which case it
takes precedence of the status of interrupt masking via PMR.

GIC_PRIO_PSR_I_SET is chosen such that (<pmr_value> |
GIC_PRIO_PSR_I_SET) does not mask more interrupts than <pmr_value> as
some sections (e.g. arch_cpu_idle(), interrupt acknowledge path)
requires PMR not to mask interrupts that could be signaled to the
CPU when using only PSR.I.

[1] https://www.spinics.net/lists/arm-kernel/msg716956.html

Fixes: 4a503217ce ("arm64: irqflags: Use ICC_PMR_EL1 for interrupt masking")
Cc: <stable@vger.kernel.org> # 5.1.x-
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wei Li <liwei391@huawei.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Suzuki K Pouloze <suzuki.poulose@arm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:01 +02:00
Julien Thierry ea37736199 arm64: irqflags: Add condition flags to inline asm clobber list
commit f57065782f upstream.

Some of the inline assembly instruction use the condition flags and need
to include "cc" in the clobber list.

Fixes: 4a503217ce ("arm64: irqflags: Use ICC_PMR_EL1 for interrupt masking")
Cc: <stable@vger.kernel.org> # 5.1.x-
Suggested-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:00 +02:00
Jon Hunter f9458d66de arm64: tegra: Fix AGIC register range
commit ba24eee668 upstream.

The Tegra AGIC interrupt controller is an ARM GIC400 interrupt
controller. Per the ARM GIC device-tree binding, the first address
region is for the GIC distributor registers and the second address
region is for the GIC CPU interface registers. The address space for
the distributor registers is 4kB, but currently this is incorrectly
defined as 8kB for the Tegra AGIC and overlaps with the CPU interface
registers. Correct the address space for the distributor to be 4kB.

Cc: stable@vger.kernel.org
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Fixes: bcdbde4335 ("arm64: tegra: Add AGIC node for Tegra210")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:00 +02:00
Like Xu 9f062aef73 KVM: x86/vPMU: refine kvm_pmu err msg when event creation failed
commit 6fc3977ccc upstream.

If a perf_event creation fails due to any reason of the host perf
subsystem, it has no chance to log the corresponding event for guest
which may cause abnormal sampling data in guest result. In debug mode,
this message helps to understand the state of vPMC and we may not
limit the number of occurrences but not in a spamming style.

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:00 +02:00
Michael Neuling e00821d97d KVM: PPC: Book3S HV: Fix CR0 setting in TM emulation
commit 3fefd1cd95 upstream.

When emulating tsr, treclaim and trechkpt, we incorrectly set CR0. The
code currently sets:
    CR0 <- 00 || MSR[TS]
but according to the ISA it should be:
    CR0 <-  0 || MSR[TS] || 0

This fixes the bit shift to put the bits in the correct location.

This is a data integrity issue as CR0 is corrupted.

Fixes: 4bb3c7a020 ("KVM: PPC: Book3S HV: Work around transactional memory bugs in POWER9")
Cc: stable@vger.kernel.org # v4.17+
Tested-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:00 +02:00
Suraj Jitindar Singh 0b9293c226 KVM: PPC: Book3S HV: Clear pending decrementer exceptions on nested guest entry
commit 3c25ab35fb upstream.

If we enter an L1 guest with a pending decrementer exception then this
is cleared on guest exit if the guest has writtien a positive value
into the decrementer (indicating that it handled the decrementer
exception) since there is no other way to detect that the guest has
handled the pending exception and that it should be dequeued. In the
event that the L1 guest tries to run a nested (L2) guest immediately
after this and the L2 guest decrementer is negative (which is loaded
by L1 before making the H_ENTER_NESTED hcall), then the pending
decrementer exception isn't cleared and the L2 entry is blocked since
L1 has a pending exception, even though L1 may have already handled
the exception and written a positive value for it's decrementer. This
results in a loop of L1 trying to enter the L2 guest and L0 blocking
the entry since L1 has an interrupt pending with the outcome being
that L2 never gets to run and hangs.

Fix this by clearing any pending decrementer exceptions when L1 makes
the H_ENTER_NESTED hcall since it won't do this if it's decrementer
has gone negative, and anyway it's decrementer has been communicated
to L0 in the hdec_expires field and L0 will return control to L1 when
this goes negative by delivering an H_DECREMENTER exception.

Fixes: 95a6432ce9 ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:00 +02:00
Suraj Jitindar Singh c86cc6eb69 KVM: PPC: Book3S HV: Signed extend decrementer value if not using large decrementer
commit 869537709e upstream.

On POWER9 the decrementer can operate in large decrementer mode where
the decrementer is 56 bits and signed extended to 64 bits. When not
operating in this mode the decrementer behaves as a 32 bit decrementer
which is NOT signed extended (as on POWER8).

Currently when reading a guest decrementer value we don't take into
account whether the large decrementer is enabled or not, and this
means the value will be incorrect when the guest is not using the
large decrementer. Fix this by sign extending the value read when the
guest isn't using the large decrementer.

Fixes: 95a6432ce9 ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:11:00 +02:00
KarimAllah Ahmed 3ac6994561 KVM: Properly check if "page" is valid in kvm_vcpu_unmap
commit b614c60278 upstream.

The field "page" is initialized to KVM_UNMAPPED_PAGE when it is not used
(i.e. when the memory lives outside kernel control). So this check will
always end up using kunmap even for memremap regions.

Fixes: e45adf665a ("KVM: Introduce a new guest mapping API")
Cc: stable@vger.kernel.org
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:59 +02:00
Wanpeng Li 700ec44626 KVM: VMX: check CPUID before allowing read/write of IA32_XSS
commit 4d763b168e upstream.

Raise #GP when guest read/write IA32_XSS, but the CPUID bits
say that it shouldn't exist.

Fixes: 203000993d (kvm: vmx: add MSR logic for XSAVES)
Reported-by: Xiaoyao Li <xiaoyao.li@linux.intel.com>
Reported-by: Tao Xu <tao3.xu@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:59 +02:00
Sean Christopherson e4472749aa KVM: VMX: Fix handling of #MC that occurs during VM-Entry
commit beb8d93b3e upstream.

A previous fix to prevent KVM from consuming stale VMCS state after a
failed VM-Entry inadvertantly blocked KVM's handling of machine checks
that occur during VM-Entry.

Per Intel's SDM, a #MC during VM-Entry is handled in one of three ways,
depending on when the #MC is recognoized.  As it pertains to this bug
fix, the third case explicitly states EXIT_REASON_MCE_DURING_VMENTRY
is handled like any other VM-Exit during VM-Entry, i.e. sets bit 31 to
indicate the VM-Entry failed.

If a machine-check event occurs during a VM entry, one of the following occurs:
 - The machine-check event is handled as if it occurred before the VM entry:
        ...
 - The machine-check event is handled after VM entry completes:
        ...
 - A VM-entry failure occurs as described in Section 26.7. The basic
   exit reason is 41, for "VM-entry failure due to machine-check event".

Explicitly handle EXIT_REASON_MCE_DURING_VMENTRY as a one-off case in
vmx_vcpu_run() instead of binning it into vmx_complete_atomic_exit().
Doing so allows vmx_vcpu_run() to handle VMX_EXIT_REASONS_FAILED_VMENTRY
in a sane fashion and also simplifies vmx_complete_atomic_exit() since
VMCS.VM_EXIT_INTR_INFO is guaranteed to be fresh.

Fixes: b060ca3b2e ("kvm: vmx: Handle VMLAUNCH/VMRESUME failure properly")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:59 +02:00
Sean Christopherson 6e91f6d411 KVM: nVMX: Always sync GUEST_BNDCFGS when it comes from vmcs01
commit 3b013a2972 upstream.

If L1 does not set VM_ENTRY_LOAD_BNDCFGS, then L1's BNDCFGS value must
be propagated to vmcs02 since KVM always runs with VM_ENTRY_LOAD_BNDCFGS
when MPX is supported.  Because the value effectively comes from vmcs01,
vmcs02 must be updated even if vmcs12 is clean.

Fixes: 62cf9bd811 ("KVM: nVMX: Fix emulation of VM_ENTRY_LOAD_BNDCFGS")
Cc: stable@vger.kernel.org
Cc: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:59 +02:00
Sean Christopherson f4da0a8823 KVM: VMX: Always signal #GP on WRMSR to MSR_IA32_CR_PAT with bad value
commit d28f4290b5 upstream.

The behavior of WRMSR is in no way dependent on whether or not KVM
consumes the value.

Fixes: 4566654bb9 ("KVM: vmx: Inject #GP on invalid PAT CR")
Cc: stable@vger.kernel.org
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:59 +02:00
Sean Christopherson 1d83b4652e KVM: nVMX: Don't dump VMCS if virtual APIC page can't be mapped
commit 73cb855684 upstream.

... as a malicious userspace can run a toy guest to generate invalid
virtual-APIC page addresses in L1, i.e. flood the kernel log with error
messages.

Fixes: 690908104e ("KVM: nVMX: allow tests to use bad virtual-APIC page address")
Cc: stable@vger.kernel.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:59 +02:00
Sakari Ailus 91fc7faf95 media: videobuf2-dma-sg: Prevent size from overflowing
commit 14f28f5cea upstream.

buf->size is an unsigned long; casting that to int will lead to an
overflow if buf->size exceeds INT_MAX.

Fix this by changing the type to unsigned long instead. This is possible
as the buf->size is always aligned to PAGE_SIZE, and therefore the size
will never have values lesser than 0.

Note on backporting to stable: the file used to be under
drivers/media/v4l2-core, it was moved to the current location after 4.14.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:58 +02:00
Sakari Ailus d2b1e734f4 media: videobuf2-core: Prevent size alignment wrapping buffer size to 0
commit defcdc5d89 upstream.

PAGE_ALIGN() may wrap the buffer size around to 0. Prevent this by
checking that the aligned value is not smaller than the unaligned one.

Note on backporting to stable: the file used to be under
drivers/media/v4l2-core, it was moved to the current location after 4.14.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:58 +02:00
Ezequiel Garcia 33397c9d5e media: coda: Remove unbalanced and unneeded mutex unlock
commit 766b9b168f upstream.

The mutex unlock in the threaded interrupt handler is not paired
with any mutex lock. Remove it.

This bug has been here for a really long time, so it applies
to any stable repo.

Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:58 +02:00
Boris Brezillon 0d37d24422 media: v4l2: Test type instead of cfg->type in v4l2_ctrl_new_custom()
commit 07d89227a9 upstream.

cfg->type can be overridden by v4l2_ctrl_fill() and the new value is
stored in the local type var. Fix the tests to use this local var.

Fixes: 0996517cf8 ("V4L/DVB: v4l2: Add new control handling framework")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
[hverkuil-cisco@xs4all.nl: change to !qmenu and !qmenu_int (checkpatch)]
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:58 +02:00
Yan, Zheng 31d15efb4c ceph: use ceph_evict_inode to cleanup inode's resource
commit 87bc5b895d upstream.

remove_session_caps() relies on __wait_on_freeing_inode(), to wait for
freeing inode to remove its caps. But VFS wakes freeing inode waiters
before calling destroy_inode().

Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/40102
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:58 +02:00
Luis Henriques 82715656bb ceph: fix end offset in truncate_inode_pages_range call
commit d31d07b97a upstream.

Commit e450f4d1a5 ("ceph: pass inclusive lend parameter to
filemap_write_and_wait_range()") fixed the end offset parameter used to
call filemap_write_and_wait_range and invalidate_inode_pages2_range.
Unfortunately it missed truncate_inode_pages_range, introducing a
regression that is easily detected by xfstest generic/130.

The problem is that when doing direct IO it is possible that an extra page
is truncated from the page cache when the end offset is page aligned.
This can cause data loss if that page hasn't been sync'ed to the OSDs.

While there, change code to use PAGE_ALIGN macro instead.

Cc: stable@vger.kernel.org
Fixes: e450f4d1a5 ("ceph: pass inclusive lend parameter to filemap_write_and_wait_range()")
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:58 +02:00
Takashi Iwai bfaf0f9ad2 ALSA: hda/hdmi - Fix i915 reverse port/pin mapping
commit 3140aafb22 upstream.

The recent fix for Icelake HDMI codec introduced the mapping from pin
NID to the i915 gfx port number.  However, it forgot the reverse
mapping from the port number to the pin NID that is used in the ELD
notifier callback.  As a result, it's processed to a wrong widget and
gives a warning like
  snd_hda_codec_hdmi hdaudioC0D2: HDMI: pin nid 5 not registered

This patch corrects it with a proper reverse mapping function.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204133
Fixes: b0d8bc50b9 ("ALSA: hda: hdmi - add Icelake support")
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:57 +02:00
Takashi Iwai 21fcbec892 ALSA: hda/hdmi - Remove duplicated define
commit eb4177116b upstream.

INTEL_GET_VENDOR_VERB is defined twice identically.
Let's remove a superfluous line.

Fixes: b0d8bc50b9 ("ALSA: hda: hdmi - add Icelake support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:57 +02:00
Hui Wang 89f7d87597 ALSA: hda/realtek: apply ALC891 headset fixup to one Dell machine
commit 4b4e0e32e4 upstream.

Without this patch, the headset-mic and headphone-mic don't work.

Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:57 +02:00
Kailang Yang ed1729b3bd ALSA: hda/realtek - Fixed Headphone Mic can't record on Dell platform
commit fbc571290d upstream.

It assigned to wrong model. So, The headphone Mic can't work.

Fixes: 3f640970a4 ("ALSA: hda - Fix headset mic detection problem for several Dell laptops")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:57 +02:00
Takashi Iwai ebb9258e65 ALSA: hda - Don't resume forcibly i915 HDMI/DP codec
commit 4914da2fb0 upstream.

We apply the codec resume forcibly at system resume callback for
updating and syncing the jack detection state that may have changed
during sleeping.  This is, however, superfluous for the codec like
Intel HDMI/DP, where the jack detection is managed via the audio
component notification; i.e. the jack state change shall be reported
sooner or later from the graphics side at mode change.

This patch changes the codec resume callback to avoid the forcible
resume conditionally with a new flag, codec->relaxed_resume, for
reducing the resume time.  The flag is set in the codec probe.

Although this doesn't fix the entire bug mentioned in the bugzilla
entry below, it's still a good optimization and some improvements are
seen.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201901
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:57 +02:00
Takashi Iwai a9865cf13a ALSA: seq: Break too long mutex context in the write loop
commit ede34f397d upstream.

The fix for the racy writes and ioctls to sequencer widened the
application of client->ioctl_mutex to the whole write loop.  Although
it does unlock/relock for the lengthy operation like the event dup,
the loop keeps the ioctl_mutex for the whole time in other
situations.  This may take quite long time if the user-space would
give a huge buffer, and this is a likely cause of some weird behavior
spotted by syzcaller fuzzer.

This patch puts a simple workaround, just adding a mutex break in the
loop when a large number of events have been processed.  This
shouldn't hit any performance drop because the threshold is set high
enough for usual operations.

Fixes: 7bd8009156 ("ALSA: seq: More protection for concurrent write and ioctl races")
Reported-by: syzbot+97aae04ce27e39cbfca9@syzkaller.appspotmail.com
Reported-by: syzbot+4c595632b98bb8ffcc66@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:56 +02:00
Masahiro Yamada c7b5dbbacb kconfig: fix missing choice values in auto.conf
commit 8e2442a5f8 upstream.

Since commit 00c864f890 ("kconfig: allow all config targets to write
auto.conf if missing"), Kconfig creates include/config/auto.conf in the
defconfig stage when it is missing.

Joonas Kylmälä reported incorrect auto.conf generation under some
circumstances.

To reproduce it, apply the following diff:

|  --- a/arch/arm/configs/imx_v6_v7_defconfig
|  +++ b/arch/arm/configs/imx_v6_v7_defconfig
|  @@ -345,14 +345,7 @@ CONFIG_USB_CONFIGFS_F_MIDI=y
|   CONFIG_USB_CONFIGFS_F_HID=y
|   CONFIG_USB_CONFIGFS_F_UVC=y
|   CONFIG_USB_CONFIGFS_F_PRINTER=y
|  -CONFIG_USB_ZERO=m
|  -CONFIG_USB_AUDIO=m
|  -CONFIG_USB_ETH=m
|  -CONFIG_USB_G_NCM=m
|  -CONFIG_USB_GADGETFS=m
|  -CONFIG_USB_FUNCTIONFS=m
|  -CONFIG_USB_MASS_STORAGE=m
|  -CONFIG_USB_G_SERIAL=m
|  +CONFIG_USB_FUNCTIONFS=y
|   CONFIG_MMC=y
|   CONFIG_MMC_SDHCI=y
|   CONFIG_MMC_SDHCI_PLTFM=y

And then, run:

$ make ARCH=arm mrproper imx_v6_v7_defconfig

You will see CONFIG_USB_FUNCTIONFS=y is correctly contained in the
.config, but not in the auto.conf.

Please note drivers/usb/gadget/legacy/Kconfig is included from a choice
block in drivers/usb/gadget/Kconfig. So USB_FUNCTIONFS is a choice value.

This is probably a similar situation described in commit beaaddb625
("kconfig: tests: test defconfig when two choices interact").

When sym_calc_choice() is called, the choice symbol forgets the
SYMBOL_DEF_USER unless all of its choice values are explicitly set by
the user.

The choice symbol is given just one chance to recall it because
set_all_choice_values() is called if SYMBOL_NEED_SET_CHOICE_VALUES
is set.

When sym_calc_choice() is called again, the choice symbol forgets it
forever, since SYMBOL_NEED_SET_CHOICE_VALUES is a one-time aid.
Hence, we cannot call sym_clear_all_valid() again and again.

It is crazy to repeat set and unset of internal flags. However, we
cannot simply get rid of "sym->flags &= flags | ~SYMBOL_DEF_USER;"
Doing so would re-introduce the problem solved by commit 5d09598d48
("kconfig: fix new choices being skipped upon config update").

To work around the issue, conf_write_autoconf() stopped calling
sym_clear_all_valid().

conf_write() must be changed accordingly. Currently, it clears
SYMBOL_WRITE after the symbol is written into the .config file. This
is needed to prevent it from writing the same symbol multiple times in
case the symbol is declared in two or more locations. I added the new
flag SYMBOL_WRITTEN, to track the symbols that have been written.

Anyway, this is a cheesy workaround in order to suppress the issue
as far as defconfig is concerned.

Handling of choices is totally broken. sym_clear_all_valid() is called
every time a user touches a symbol from the GUI interface. To reproduce
it, just add a new symbol drivers/usb/gadget/legacy/Kconfig, then touch
around unrelated symbols from menuconfig. USB_FUNCTIONFS will disappear
from the .config file.

I added the Fixes tag since it is more fatal than before. But, this
has been broken since long long time before, and still it is.
We should take a closer look to fix this correctly somehow.

Fixes: 00c864f890 ("kconfig: allow all config targets to write auto.conf if missing")
Cc: linux-stable <stable@vger.kernel.org> # 4.19+
Reported-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:56 +02:00
Xiao Ni f4ca6021b5 raid5-cache: Need to do start() part job after adding journal device
commit d9771f5ec4 upstream.

commit d5d885fd51 ("md: introduce new personality funciton start()")
splits the init job to two parts. The first part run() does the jobs that
do not require the md threads. The second part start() does the jobs that
require the md threads.

Now it just does run() in adding new journal device. It needs to do the
second part start() too.

Fixes: d5d885fd51 ("md: introduce new personality funciton start()")
Cc: stable@vger.kernel.org #v4.9+
Reported-by: Michal Soltys <soltys@ziu.info>
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:56 +02:00
Mark Brown 906c14d095 ASoC: core: Adapt for debugfs API change
commit c2c928c931 upstream.

Back in ff9fb72bc0 (debugfs: return error values, not NULL) the
debugfs APIs were changed to return error pointers rather than NULL
pointers on error, breaking the error checking in ASoC. Update the
code to use IS_ERR() and log the codes that are returned as part of
the error messages.

Fixes: ff9fb72bc0 (debugfs: return error values, not NULL)
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:56 +02:00
Mark Brown 3a25c3e66f ASoC: dapm: Adapt for debugfs API change
commit ceaea851b9 upstream.

Back in ff9fb72bc0 (debugfs: return error values, not NULL) the
debugfs APIs were changed to return error pointers rather than NULL
pointers on error, breaking the error checking in ASoC. Update the
code to use IS_ERR() and log the codes that are returned as part of
the error messages.

Fixes: ff9fb72bc0 (debugfs: return error values, not NULL)
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:56 +02:00
Christophe Leroy 8035ba716c lib/scatterlist: Fix mapping iterator when sg->offset is greater than PAGE_SIZE
commit aeb8724653 upstream.

All mapping iterator logic is based on the assumption that sg->offset
is always lower than PAGE_SIZE.

But there are situations where sg->offset is such that the SG item
is on the second page. In that case sg_copy_to_buffer() fails
properly copying the data into the buffer. One of the reason is
that the data will be outside the kmapped area used to access that
data.

This patch fixes the issue by adjusting the mapping iterator
offset and pgoffset fields such that offset is always lower than
PAGE_SIZE.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 4225fc8555 ("lib/scatterlist: use page iterator in the mapping iterator")
Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:55 +02:00
Trond Myklebust 3afd8b1e15 SUNRPC: Ensure the bvecs are reset when we re-encode the RPC request
commit 7536908982 upstream.

The bvec tracks the list of pages, so if the number of pages changes
due to a re-encode, we need to reset the bvec as well.

Fixes: 277e4ab7d5 ("SUNRPC: Simplify TCP receive code by switching...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:55 +02:00
Trond Myklebust a09d3e3c30 pnfs: Fix a problem where we gratuitously start doing I/O through the MDS
commit 58bbeab425 upstream.

If the client has to stop in pnfs_update_layout() to wait for another
layoutget to complete, it currently exits and defaults to I/O through
the MDS if the layoutget was successful.

Fixes: d03360aaf5 ("pNFS: Ensure we return the error if someone kills...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:55 +02:00
Trond Myklebust 9cd087dacd pnfs/flexfiles: Fix PTR_ERR() dereferences in ff_layout_track_ds_error
commit 8e04fdfadd upstream.

mirror->mirror_ds can be NULL if uninitialised, but can contain
a PTR_ERR() if call to GETDEVICEINFO failed.

Fixes: 65990d1afb ("pNFS/flexfiles: Fix a deadlock on LAYOUTGET")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # 4.10+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:55 +02:00
Max Kellermann 3744eb0954 Revert "NFS: readdirplus optimization by cache mechanism" (memleak)
commit db531db951 upstream.

This reverts commit be4c2d4723.

That commit caused a severe memory leak in nfs_readdir_make_qstr().

When listing a directory with more than 100 files (this is how many
struct nfs_cache_array_entry elements fit in one 4kB page), all
allocated file name strings past those 100 leak.

The root of the leakage is that those string pointers are managed in
pages which are never linked into the page cache.

fs/nfs/dir.c puts pages into the page cache by calling
read_cache_page(); the callback function nfs_readdir_filler() will
then fill the given page struct which was passed to it, which is
already linked in the page cache (by do_read_cache_page() calling
add_to_page_cache_lru()).

Commit be4c2d4723 added another (local) array of allocated pages, to
be filled with more data, instead of discarding excess items received
from the NFS server.  Those additional pages can be used by the next
nfs_readdir_filler() call (from within the same nfs_readdir() call).

The leak happens when some of those additional pages are never used
(copied to the page cache using copy_highpage()).  The pages will be
freed by nfs_readdir_free_pages(), but their contents will not.  The
commit did not invoke nfs_readdir_clear_array() (and doing so would
have been dangerous, because it did not track which of those pages
were already copied to the page cache, risking double free bugs).

How to reproduce the leak:

- Use a kernel with CONFIG_SLUB_DEBUG_ON.

- Create a directory on a NFS mount with more than 100 files with
  names long enough to use the "kmalloc-32" slab (so we can easily
  look up the allocation counts):

  for i in `seq 110`; do touch ${i}_0123456789abcdef; done

- Drop all caches:

  echo 3 >/proc/sys/vm/drop_caches

- Check the allocation counter:

  grep nfs_readdir /sys/kernel/slab/kmalloc-32/alloc_calls
  30564391 nfs_readdir_add_to_array+0x73/0xd0 age=534558/4791307/6540952 pid=370-1048386 cpus=0-47 nodes=0-1

- Request a directory listing and check the allocation counters again:

  ls
  [...]
  grep nfs_readdir /sys/kernel/slab/kmalloc-32/alloc_calls
  30564511 nfs_readdir_add_to_array+0x73/0xd0 age=207/4792999/6542663 pid=370-1048386 cpus=0-47 nodes=0-1

There are now 120 new allocations.

- Drop all caches and check the counters again:

  echo 3 >/proc/sys/vm/drop_caches
  grep nfs_readdir /sys/kernel/slab/kmalloc-32/alloc_calls
  30564401 nfs_readdir_add_to_array+0x73/0xd0 age=735/4793524/6543176 pid=370-1048386 cpus=0-47 nodes=0-1

110 allocations are gone, but 10 have leaked and will never be freed.

Unhelpfully, those allocations are explicitly excluded from KMEMLEAK,
that's why my initial attempts with KMEMLEAK were not successful:

	/*
	 * Avoid a kmemleak false positive. The pointer to the name is stored
	 * in a page cache page which kmemleak does not scan.
	 */
	kmemleak_not_leak(string->name);

It would be possible to solve this bug without reverting the whole
commit:

- keep track of which pages were not used, and call
  nfs_readdir_clear_array() on them, or
- manually link those pages into the page cache

But for now I have decided to just revert the commit, because the real
fix would require complex considerations, risking more dangerous
(crash) bugs, which may seem unsuitable for the stable branches.

Signed-off-by: Max Kellermann <mk@cm4all.com>
Cc: stable@vger.kernel.org # v5.1+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:55 +02:00
Trond Myklebust eb7a7cfcf0 NFSv4: Handle the special Linux file open access mode
commit 44942b4e45 upstream.

According to the open() manpage, Linux reserves the access mode 3
to mean "check for read and write permission on the file and return
a file descriptor that can't be used for reading or writing."

Currently, the NFSv4 code will ask the server to open the file,
and will use an incorrect share access mode of 0. Since it has
an incorrect share access mode, the client later forgets to send
a corresponding close, meaning it can leak stateids on the server.

Fixes: ce4ef7c0a8 ("NFS: Split out NFS v4 file operations")
Cc: stable@vger.kernel.org # 3.6+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:55 +02:00
Eiichi Tsukata 09df5c0ef2 tracing: Fix user stack trace "??" output
commit 6d54ceb539 upstream.

Commit c5c27a0a58 ("x86/stacktrace: Remove the pointless ULONG_MAX
marker") removes ULONG_MAX marker from user stack trace entries but
trace_user_stack_print() still uses the marker and it outputs unnecessary
"??".

For example:

            less-1911  [001] d..2    34.758944: <user stack trace>
   =>  <00007f16f2295910>
   => ??
   => ??
   => ??
   => ??
   => ??
   => ??
   => ??

The user stack trace code zeroes the storage before saving the stack, so if
the trace is shorter than the maximum number of entries it can terminate
the print loop if a zero entry is detected.

Link: http://lkml.kernel.org/r/20190630085438.25545-1-devel@etsukata.com

Cc: stable@vger.kernel.org
Fixes: 4285f2fcef ("tracing: Remove the ULONG_MAX stack trace hackery")
Signed-off-by: Eiichi Tsukata <devel@etsukata.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:55 +02:00
Julien Thierry afa1d4c43c arm64: Fix interrupt tracing in the presence of NMIs
commit 17ce302f31 upstream.

In the presence of any form of instrumentation, nmi_enter() should be
done before calling any traceable code and any instrumentation code.

Currently, nmi_enter() is done in handle_domain_nmi(), which is much
too late as instrumentation code might get called before. Move the
nmi_enter/exit() calls to the arch IRQ vector handler.

On arm64, it is not possible to know if the IRQ vector handler was
called because of an NMI before acknowledging the interrupt. However, It
is possible to know whether normal interrupts could be taken in the
interrupted context (i.e. if taking an NMI in that context could
introduce a potential race condition).

When interrupting a context with IRQs disabled, call nmi_enter() as soon
as possible. In contexts with IRQs enabled, defer this to the interrupt
controller, which is in a better position to know if an interrupt taken
is an NMI.

Fixes: bc3c03ccb4 ("arm64: Enable the support of pseudo-NMIs")
Cc: <stable@vger.kernel.org> # 5.1.x-
Cc: Will Deacon <will.deacon@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:54 +02:00
Dmitry Osipenko 28a8baf3c6 opp: Don't use IS_ERR on invalid supplies
commit 560d1bcad7 upstream.

_set_opp_custom() receives a set of OPP supplies as its arguments and
the caller of it passes NULL when the supplies are not valid. But
_set_opp_custom(), by mistake, checks for error by performing
IS_ERR(old_supply) on it which will always evaluate to false.

The problem was spotted during of testing of upcoming update for the
NVIDIA Tegra CPUFreq driver.

Cc: stable <stable@vger.kernel.org>
Fixes: 7e535993fa ("OPP: Separate out custom OPP handler specific code")
Reported-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
[ Viresh: Massaged changelog ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:54 +02:00
Emmanuel Grumbach 02fbcac747 iwlwifi: mvm: clear rfkill_safe_init_done when we start the firmware
commit 9402256286 upstream.

Otherwise it'll stay set forever which is clearly buggy.

Cc: stable@vger.kernel.org
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:54 +02:00
Johannes Berg d490dd5310 iwlwifi: mvm: delay GTK setting in FW in AP mode
commit c56e00a3fe upstream.

In AP (and IBSS) mode, we can only set GTKs to firmware after we have
sent down the multicast station, but this we can only do after we've
enabled beaconing, etc.

However, during rfkill exit, hostapd will configure the keys before
starting the AP, and cfg80211/mac80211 accept it happily.

On earlier devices, this didn't bother us as GTK TX wasn't really
handled in firmware, we just put the key material into the TX cmd
and thus it only mattered when we actually transmitted a frame.

On newer devices, however, the firmware needs to track all of this
and that doesn't work if we add the key before the (multicast) sta
it belongs to.

To fix this, keep a list of keys to add during AP enable, and call
the function there.

Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:54 +02:00
Emmanuel Grumbach cbc0bf51c9 iwlwifi: fix RF-Kill interrupt while FW load for gen2 devices
commit ed3e4c6d3c upstream.

Newest devices have a new firmware load mechanism. This
mechanism is called the context info. It means that the
driver doesn't need to load the sections of the firmware.
The driver rather prepares a place in DRAM, with pointers
to the relevant sections of the firmware, and the firmware
loads itself.
At the end of the process, the firmware sends the ALIVE
interrupt. This is different from the previous scheme in
which the driver expected the FH_TX interrupt after each
section being transferred over the DMA.

In order to support this new flow, we enabled all the
interrupts. This broke the assumption that we have in the
code that the RF-Kill interrupt can't interrupt the firmware
load flow.

Change the context info flow to enable only the ALIVE
interrupt, and re-enable all the other interrupts only
after the firmware is alive. Then, we won't see the RF-Kill
interrupt until then. Getting the RF-Kill interrupt while
loading the firmware made us kill the firmware while it is
loading and we ended up dumping garbage instead of the firmware
state.

Re-enable the ALIVE | RX interrupts from the ISR when we
get the ALIVE interrupt to be able to get the RX interrupt
that comes immediately afterwards for the ALIVE
notification. This is needed for non MSI-X only.

Cc: stable@vger.kernel.org
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:54 +02:00
Emmanuel Grumbach ce0b3a3fbb iwlwifi: don't WARN when calling iwl_get_shared_mem_conf with RF-Kill
commit 0d53cfd0cc upstream.

iwl_mvm_send_cmd returns 0 when the command won't be sent
because RF-Kill is asserted. Do the same when we call
iwl_get_shared_mem_conf since it is not sent through
iwl_mvm_send_cmd but directly calls the transport layer.

Cc: stable@vger.kernel.org
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:54 +02:00
Emmanuel Grumbach 4c4359b4e2 iwlwifi: pcie: fix ALIVE interrupt handling for gen2 devices w/o MSI-X
commit ec46ae3024 upstream.

We added code to restock the buffer upon ALIVE interrupt
when MSI-X is disabled. This was added as part of the context
info code. This code was added only if the ISR debug level
is set which is very unlikely to be related.
Move this code to run even when the ISR debug level is not
set.

Note that gen2 devices work with MSI-X in most cases so that
this path is seldom used.

Cc: stable@vger.kernel.org
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:54 +02:00
Emmanuel Grumbach d31f085348 iwlwifi: pcie: don't service an interrupt that was masked
commit 3b57a10ca1 upstream.

Sometimes the register status can include interrupts that
were masked. We can, for example, get the RF-Kill bit set
in the interrupt status register although this interrupt
was masked. Then if we get the ALIVE interrupt (for example)
that was not masked, we need to *not* service the RF-Kill
interrupt.
Fix this in the MSI-X interrupt handler.

Cc: stable@vger.kernel.org
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:53 +02:00
Oren Givon b0dd5c6a62 iwlwifi: add support for hr1 RF ID
commit 498d3eb5bf upstream.

The 22000 series FW that was meant to be used with hr is
also the FW that is used for hr1 and has a different RF ID.
Add support to load the hr FW when hr1 RF ID is detected.

Cc: stable@vger.kernel.org # 5.1+
Signed-off-by: Oren Givon <oren.givon@intel.com>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:53 +02:00
Jon Hunter 5ba8c02c29 arm64: tegra: Fix Jetson Nano GPU regulator
commit 434e8aedea upstream.

There are a few issues with the GPU regulator defined for Jetson Nano
which are:

1. The GPU regulator is a PWM based regulator and not a fixed voltage
   regulator.
2. The output voltages for the GPU regulator are not correct.
3. The regulator enable ramp delay is too short for the regulator and
   needs to be increased. 2ms should be sufficient.
4. This is the same regulator used on Jetson TX1 and so make the ramp
   delay and settling time the same as Jetson TX1.

Cc: stable@vger.kernel.org
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Fixes: 6772cd0eac ("arm64: tegra: Add NVIDIA Jetson Nano Developer Kit support")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:53 +02:00
Jon Hunter 57a9365708 arm64: tegra: Update Jetson TX1 GPU regulator timings
commit ece6031ece upstream.

The GPU regulator enable ramp delay for Jetson TX1 is set to 1ms which
not sufficient because the enable ramp delay has been measured to be
greater than 1ms. Furthermore, the downstream kernels released by NVIDIA
for Jetson TX1 are using a enable ramp delay 2ms and a settling delay of
160us. Update the GPU regulator enable ramp delay for Jetson TX1 to be
2ms and add a settling delay of 160us.

Cc: stable@vger.kernel.org
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Fixes: 5e6b9a89af ("arm64: tegra: Add VDD_GPU regulator to Jetson TX1")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:53 +02:00
Krzysztof Kozlowski 32380e7b91 regulator: s2mps11: Fix buck7 and buck8 wrong voltages
commit 16da0eb5ab upstream.

On S2MPS11 device, the buck7 and buck8 regulator voltages start at 750
mV, not 600 mV.  Using wrong minimal value caused shifting of these
regulator values by 150 mV (e.g. buck7 usually configured to v1.35 V was
reported as 1.2 V).

On most of the boards these regulators are left in default state so this
was only affecting reported voltage.  However if any driver wanted to
change them, then effectively it would set voltage 150 mV higher than
intended.

Cc: <stable@vger.kernel.org>
Fixes: cb74685ecb ("regulator: s2mps11: Add samsung s2mps11 regulator driver")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:53 +02:00
Krzysztof Kozlowski 3d85a83ac5 regulator: s2mps11: Fix ERR_PTR dereference on GPIO lookup failure
commit 70ca117b02 upstream.

If devm_gpiod_get_from_of_node() call returns ERR_PTR, it is assigned
into an array of GPIO descriptors and used later because such error is
not treated as critical thus it is not propagated back to the probe
function.

All code later expects that such GPIO descriptor is either a NULL or
proper value.  This later might lead to dereference of ERR_PTR.

Only devices with S2MPS14 flavor are affected (other do not control
regulators with GPIOs).

Fixes: 1c984942f0 ("regulator: s2mps11: Pass descriptor instead of GPIO number")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:53 +02:00
Hui Wang e019013130 Input: alps - fix a mismatch between a condition check and its comment
commit 771a081e44 upstream.

In the function alps_is_cs19_trackpoint(), we check if the param[1] is
in the 0x20~0x2f range, but the code we wrote for this checking is not
correct:
(param[1] & 0x20) does not mean param[1] is in the range of 0x20~0x2f,
it also means the param[1] is in the range of 0x30~0x3f, 0x60~0x6f...

Now fix it with a new condition checking ((param[1] & 0xf0) == 0x20).

Fixes: 7e4935ccc3 ("Input: alps - don't handle ALPS cs19 trackpoint-only device")
Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:53 +02:00
Nick Black bba47b85d2 Input: synaptics - whitelist Lenovo T580 SMBus intertouch
commit 1976d7d200 upstream.

Adds the Lenovo T580 to the SMBus intertouch list for Synaptics
touchpads. I've tested with this for a week now, and it seems a great
improvement. It's also nice to have the complaint gone from dmesg.

Signed-off-by: Nick Black <dankamongmen@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:53 +02:00
Hui Wang 33871123fa Input: alps - don't handle ALPS cs19 trackpoint-only device
commit 7e4935ccc3 upstream.

On a latest Lenovo laptop, the trackpoint and 3 buttons below it
don't work at all, when we move the trackpoint or press those 3
buttons, the kernel will print out:
"Rejected trackstick packet from non DualPoint device"

This device is identified as an alps touchpad but the packet has
trackpoint format, so the alps.c drops the packet and prints out
the message above.

According to XiaoXiao's explanation, this device is named cs19 and
is trackpoint-only device, its firmware is only for trackpoint, it
is independent of touchpad and is a device completely different from
DualPoint ones.

To drive this device with mininal changes to the existing driver, we
just let the alps driver not handle this device, then the trackpoint.c
will be the driver of this device if the trackpoint driver is enabled.
(if not, this device will fallback to a bare PS/2 device)

With the trackpoint.c, this trackpoint and 3 buttons all work well,
they have all features that the trackpoint should have, like
scrolling-screen, drag-and-drop and frame-selection.

Signed-off-by: XiaoXiao Liu <sliuuxiaonxiao@gmail.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:52 +02:00
Grant Hernandez 63fabf4287 Input: gtco - bounds check collection indent level
commit 2a017fd82c upstream.

The GTCO tablet input driver configures itself from an HID report sent
via USB during the initial enumeration process. Some debugging messages
are generated during the parsing. A debugging message indentation
counter is not bounds checked, leading to the ability for a specially
crafted HID report to cause '-' and null bytes be written past the end
of the indentation array. As long as the kernel has CONFIG_DYNAMIC_DEBUG
enabled, this code will not be optimized out.  This was discovered
during code review after a previous syzkaller bug was found in this
driver.

Signed-off-by: Grant Hernandez <granthernandez@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:52 +02:00
Coly Li 26b8adf883 bcache: destroy dc->writeback_write_wq if failed to create dc->writeback_thread
commit f54d801dda upstream.

Commit 9baf30972b ("bcache: fix for gc and write-back race") added a
new work queue dc->writeback_write_wq, but forgot to destroy it in the
error condition when creating dc->writeback_thread failed.

This patch destroys dc->writeback_write_wq if kthread_create() returns
error pointer to dc->writeback_thread, then a memory leak is avoided.

Fixes: 9baf30972b ("bcache: fix for gc and write-back race")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:52 +02:00
Coly Li 8b52937e01 bcache: fix mistaken sysfs entry for io_error counter
commit 5461999848 upstream.

In bch_cached_dev_files[] from driver/md/bcache/sysfs.c, sysfs_errors is
incorrectly inserted in. The correct entry should be sysfs_io_errors.

This patch fixes the problem and now I/O errors of cached device can be
read from /sys/block/bcache<N>/bcache/io_errors.

Fixes: c7b7bd0740 ("bcache: add io_disable to struct cached_dev")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:52 +02:00
Coly Li 735c54c3ce bcache: ignore read-ahead request failure on backing device
commit 578df99b1b upstream.

When md raid device (e.g. raid456) is used as backing device, read-ahead
requests on a degrading and recovering md raid device might be failured
immediately by md raid code, but indeed this md raid array can still be
read or write for normal I/O requests. Therefore such failed read-ahead
request are not real hardware failure. Further more, after degrading and
recovering accomplished, read-ahead requests will be handled by md raid
array again.

For such condition, I/O failures of read-ahead requests don't indicate
real health status (because normal I/O still be served), they should not
be counted into I/O error counter dc->io_errors.

Since there is no simple way to detect whether the backing divice is a
md raid device, this patch simply ignores I/O failures for read-ahead
bios on backing device, to avoid bogus backing device failure on a
degrading md raid array.

Suggested-and-tested-by: Thorsten Knabe <linux@thorsten-knabe.de>
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:52 +02:00
Coly Li e294fa562f bcache: Revert "bcache: free heap cache_set->flush_btree in bch_journal_free"
commit ba82c1ac16 upstream.

This reverts commit 6268dc2c47.

This patch depends on commit c4dc2497d5 ("bcache: fix high CPU
occupancy during journal") which is reverted in previous patch. So
revert this one too.

Fixes: 6268dc2c47 ("bcache: free heap cache_set->flush_btree in bch_journal_free")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Cc: Shenghui Wang <shhuiw@foxmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:52 +02:00
Coly Li fe4a2764fd bcache: Revert "bcache: fix high CPU occupancy during journal"
commit 249a5f6da5 upstream.

This reverts commit c4dc2497d5.

This patch enlarges a race between normal btree flush code path and
flush_btree_write(), which causes deadlock when journal space is
exhausted. Reverts this patch makes the race window from 128 btree
nodes to only 1 btree nodes.

Fixes: c4dc2497d5 ("bcache: fix high CPU occupancy during journal")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Cc: Tang Junhui <tang.junhui.linux@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:52 +02:00
Coly Li 3244e913f1 Revert "bcache: set CACHE_SET_IO_DISABLE in bch_cached_dev_error()"
commit 695277f16b upstream.

This reverts commit 6147305c73.

Although this patch helps the failed bcache device to stop faster when
too many I/O errors detected on corresponding cached device, setting
CACHE_SET_IO_DISABLE bit to cache set c->flags was not a good idea. This
operation will disable all I/Os on cache set, which means other attached
bcache devices won't work neither.

Without this patch, the failed bcache device can also be stopped
eventually if internal I/O accomplished (e.g. writeback). Therefore here
I revert it.

Fixes: 6147305c73 ("bcache: set CACHE_SET_IO_DISABLE in bch_cached_dev_error()")
Reported-by: Yong Li <mr.liyong@qq.com>
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:51 +02:00
Aurelien Aptel 3ed98f12f8 CIFS: fix deadlock in cached root handling
commit 7e5a70ad88 upstream.

Prevent deadlock between open_shroot() and
cifs_mark_open_files_invalid() by releasing the lock before entering
SMB2_open, taking it again after and checking if we still need to use
the result.

Link: https://lore.kernel.org/linux-cifs/684ed01c-cbca-2716-bc28-b0a59a0f8521@prodrive-technologies.com/T/#u
Fixes: 3d4ef9a153 ("smb3: fix redundant opens on root")
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:51 +02:00
Ronnie Sahlberg 8f85f239ad cifs: flush before set-info if we have writeable handles
commit aa081859b1 upstream.

Servers can defer destaging any data and updating the mtime until close().
This means that if we do a setinfo to modify the mtime while other handles
are open for write the server may overwrite our setinfo timestamps when
if flushes the file on close() of the writeable handle.

To solve this we add an explicit flush when the mtime is about to
be updated.

This fixes "cp -p" to preserve mtime when copying a file onto an SMB2 share.

CC: Stable <stable@vger.kernel.org>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:51 +02:00
Paulo Alcantara (SUSE) b14228f7e9 cifs: Properly handle auto disabling of serverino option
commit 29fbeb7a90 upstream.

Fix mount options comparison when serverino option is turned off later
in cifs_autodisable_serverino() and thus avoiding mismatch of new cifs
mounts.

Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <paulo@paulo.ac>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilove@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:51 +02:00
Ronnie Sahlberg 98c3db87aa cifs: fix crash in smb2_compound_op()/smb2_set_next_command()
commit 88a92c913c upstream.

RHBZ: 1722704

In low memory situations the various SMB2_*_init() functions can fail
to allocate a request PDU and thus leave the request iovector as NULL.

If we don't check the return code for failure we end up calling
smb2_set_next_command() with a NULL iovector causing a crash when it tries
to dereference it.

CC: Stable <stable@vger.kernel.org>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:51 +02:00
Ronnie Sahlberg 68421c9014 cifs: always add credits back for unsolicited PDUs
commit 3e2725796c upstream.

not just if CONFIG_CIFS_DEBUG2 is enabled.

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:51 +02:00
Wen Yang 72cd0e9143 crypto: crypto4xx - fix a potential double free in ppc4xx_trng_probe
commit 95566aa75c upstream.

There is a possible double free issue in ppc4xx_trng_probe():

85:	dev->trng_base = of_iomap(trng, 0);
86:	of_node_put(trng);          ---> released here
87:	if (!dev->trng_base)
88:		goto err_out;
...
110:	ierr_out:
111:		of_node_put(trng);  ---> double released here
...

This issue was detected by using the Coccinelle software.
We fix it by removing the unnecessary of_node_put().

Fixes: 5343e674f3 ("crypto4xx: integrate ppc4xx-rng into crypto4xx")
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: <stable@vger.kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Allison Randal <allison@lohutok.net>
Cc: Armijn Hemel <armijn@tjaldur.nl>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:51 +02:00
Cfir Cohen b9796d1ce2 crypto: ccp/gcm - use const time tag comparison.
commit 538a5a072e upstream.

Avoid leaking GCM tag through timing side channel.

Fixes: 36cf515b9b ("crypto: ccp - Enable support for AES GCM on v5 CCPs")
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Cfir Cohen <cfir@google.com>
Acked-by: Gary R Hook <ghook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:50 +02:00
Hook, Gary 1ad6d2f0e2 crypto: ccp - memset structure fields to zero before reuse
commit 20e833dc36 upstream.

The AES GCM function reuses an 'op' data structure, which members
contain values that must be cleared for each (re)use.

This fix resolves a crypto self-test failure:
alg: aead: gcm-aes-ccp encryption test failed (wrong result) on test vector 2, cfg="two even aligned splits"

Fixes: 36cf515b9b ("crypto: ccp - Enable support for AES GCM on v5 CCPs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:50 +02:00
Christian Lamparter f7ca2ff093 crypto: crypto4xx - block ciphers should only accept complete blocks
commit 0f7a813740 upstream.

The hardware automatically zero pads incomplete block ciphers
blocks without raising any errors. This is a screw-up. This
was noticed by CONFIG_CRYPTO_MANAGER_EXTRA_TESTS tests that
sent a incomplete blocks and expect them to fail.

This fixes:
cbc-aes-ppc4xx encryption unexpectedly succeeded on test vector
"random: len=2409 klen=32"; expected_error=-22, cfg="random:
may_sleep use_digest src_divs=[96.90%@+2295, 2.34%@+4066,
0.32%@alignmask+12, 0.34%@+4087, 0.9%@alignmask+1787, 0.1%@+3767]
iv_offset=6"

ecb-aes-ppc4xx encryption unexpectedly succeeded on test vector
"random: len=1011 klen=32"; expected_error=-22, cfg="random:
may_sleep use_digest src_divs=[100.0%@alignmask+20]
dst_divs=[3.12%@+3001, 96.88%@+4070]"

Cc: Eric Biggers <ebiggers@kernel.org>
Cc: stable@vger.kernel.org [4.19, 5.0 and 5.1]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:50 +02:00
Christian Lamparter fe781373ae crypto: crypto4xx - fix blocksize for cfb and ofb
commit 70c4997f34 upstream.

While the hardware consider them to be blockciphers, the
reference implementation defines them as streamciphers.

Do the right thing and set the blocksize to 1. This
was found by CONFIG_CRYPTO_MANAGER_EXTRA_TESTS.

This fixes the following issues:
skcipher: blocksize for ofb-aes-ppc4xx (16) doesn't match generic impl (1)
skcipher: blocksize for cfb-aes-ppc4xx (16) doesn't match generic impl (1)

Cc: Eric Biggers <ebiggers@kernel.org>
Cc: stable@vger.kernel.org
Fixes: f2a13e7cba ("crypto: crypto4xx - enable AES RFC3686, ECB, CFB and OFB offloads")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:50 +02:00
Christian Lamparter 87bfbcff1e crypto: crypto4xx - fix AES CTR blocksize value
commit bfa2ba7d9e upstream.

This patch fixes a issue with crypto4xx's ctr(aes) that was
discovered by libcapi's kcapi-enc-test.sh test.

The some of the ctr(aes) encryptions test were failing on the
non-power-of-two test:

kcapi-enc - Error: encryption failed with error 0
kcapi-enc - Error: decryption failed with error 0
[FAILED: 32-bit - 5.1.0-rc1+] 15 bytes: STDIN / STDOUT enc test (128 bits):
original file (1d100e..cc96184c) and generated file (e3b0c442..1b7852b855)
[FAILED: 32-bit - 5.1.0-rc1+] 15 bytes: STDIN / STDOUT enc test (128 bits)
(openssl generated CT): original file (e3b0..5) and generated file (3..8e)
[PASSED: 32-bit - 5.1.0-rc1+] 15 bytes: STDIN / STDOUT enc test (128 bits)
(openssl generated PT)
[FAILED: 32-bit - 5.1.0-rc1+] 15 bytes: STDIN / STDOUT enc test (password):
original file (1d1..84c) and generated file (e3b..852b855)

But the 16, 32, 512, 65536 tests always worked.

Thankfully, this isn't a hidden hardware problem like previously,
instead this turned out to be a copy and paste issue.

With this patch, all the tests are passing with and
kcapi-enc-test.sh gives crypto4xx's a clean bill of health:
 "Number of failures: 0" :).

Cc: stable@vger.kernel.org
Fixes: 98e87e3d93 ("crypto: crypto4xx - add aes-ctr support")
Fixes: f2a13e7cba ("crypto: crypto4xx - enable AES RFC3686, ECB, CFB and OFB offloads")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:50 +02:00
Eric Biggers baade060ea crypto: chacha20poly1305 - fix atomic sleep when using async algorithm
commit 7545b6c208 upstream.

Clear the CRYPTO_TFM_REQ_MAY_SLEEP flag when the chacha20poly1305
operation is being continued from an async completion callback, since
sleeping may not be allowed in that context.

This is basically the same bug that was recently fixed in the xts and
lrw templates.  But, it's always been broken in chacha20poly1305 too.
This was found using syzkaller in combination with the updated crypto
self-tests which actually test the MAY_SLEEP flag now.

Reproducer:

    python -c 'import socket; socket.socket(socket.AF_ALG, 5, 0).bind(
    	       ("aead", "rfc7539(cryptd(chacha20-generic),poly1305-generic)"))'

Kernel output:

    BUG: sleeping function called from invalid context at include/crypto/algapi.h:426
    in_atomic(): 1, irqs_disabled(): 0, pid: 1001, name: kworker/2:2
    [...]
    CPU: 2 PID: 1001 Comm: kworker/2:2 Not tainted 5.2.0-rc2 #5
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-20181126_142135-anatol 04/01/2014
    Workqueue: crypto cryptd_queue_worker
    Call Trace:
     __dump_stack lib/dump_stack.c:77 [inline]
     dump_stack+0x4d/0x6a lib/dump_stack.c:113
     ___might_sleep kernel/sched/core.c:6138 [inline]
     ___might_sleep.cold.19+0x8e/0x9f kernel/sched/core.c:6095
     crypto_yield include/crypto/algapi.h:426 [inline]
     crypto_hash_walk_done+0xd6/0x100 crypto/ahash.c:113
     shash_ahash_update+0x41/0x60 crypto/shash.c:251
     shash_async_update+0xd/0x10 crypto/shash.c:260
     crypto_ahash_update include/crypto/hash.h:539 [inline]
     poly_setkey+0xf6/0x130 crypto/chacha20poly1305.c:337
     poly_init+0x51/0x60 crypto/chacha20poly1305.c:364
     async_done_continue crypto/chacha20poly1305.c:78 [inline]
     poly_genkey_done+0x15/0x30 crypto/chacha20poly1305.c:369
     cryptd_skcipher_complete+0x29/0x70 crypto/cryptd.c:279
     cryptd_skcipher_decrypt+0xcd/0x110 crypto/cryptd.c:339
     cryptd_queue_worker+0x70/0xa0 crypto/cryptd.c:184
     process_one_work+0x1ed/0x420 kernel/workqueue.c:2269
     worker_thread+0x3e/0x3a0 kernel/workqueue.c:2415
     kthread+0x11f/0x140 kernel/kthread.c:255
     ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352

Fixes: 71ebc4d1b2 ("crypto: chacha20poly1305 - Add a ChaCha20-Poly1305 AEAD construction, RFC7539")
Cc: <stable@vger.kernel.org> # v4.2+
Cc: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:50 +02:00
Elena Petrova 7bbf1e0eae crypto: arm64/sha2-ce - correct digest for empty data in finup
commit 6bd934de1e upstream.

The sha256-ce finup implementation for ARM64 produces wrong digest
for empty input (len=0). Expected: the actual digest, result: initial
value of SHA internal state. The error is in sha256_ce_finup:
for empty data `finalize` will be 1, so the code is relying on
sha2_ce_transform to make the final round. However, in
sha256_base_do_update, the block function will not be called when
len == 0.

Fix it by setting finalize to 0 if data is empty.

Fixes: 03802f6a80 ("crypto: arm64/sha2-ce - move SHA-224/256 ARMv8 implementation to base layer")
Cc: stable@vger.kernel.org
Signed-off-by: Elena Petrova <lenaptr@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:50 +02:00
Elena Petrova 48100f1cc6 crypto: arm64/sha1-ce - correct digest for empty data in finup
commit 1d4aaf16de upstream.

The sha1-ce finup implementation for ARM64 produces wrong digest
for empty input (len=0). Expected: da39a3ee..., result: 67452301...
(initial value of SHA internal state). The error is in sha1_ce_finup:
for empty data `finalize` will be 1, so the code is relying on
sha1_ce_transform to make the final round. However, in
sha1_base_do_update, the block function will not be called when
len == 0.

Fix it by setting finalize to 0 if data is empty.

Fixes: 07eb54d306 ("crypto: arm64/sha1-ce - move SHA-1 ARMv8 implementation to base layer")
Cc: stable@vger.kernel.org
Signed-off-by: Elena Petrova <lenaptr@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:49 +02:00
Hook, Gary 0c0de67597 crypto: ccp - Validate the the error value used to index error messages
commit 52393d617a upstream.

The error code read from the queue status register is only 6 bits wide,
but we need to verify its value is within range before indexing the error
messages.

Fixes: 81422badb3 ("crypto: ccp - Make syslog errors human-readable")
Cc: <stable@vger.kernel.org>
Reported-by: Cfir Cohen <cfir@google.com>
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:49 +02:00
Ard Biesheuvel 629e1cb02b crypto: caam - limit output IV to CBC to work around CTR mode DMA issue
commit ed527b13d8 upstream.

The CAAM driver currently violates an undocumented and slightly
controversial requirement imposed by the crypto stack that a buffer
referred to by the request structure via its virtual address may not
be modified while any scatterlists passed via the same request
structure are mapped for inbound DMA.

This may result in errors like

  alg: aead: decryption failed on test 1 for gcm_base(ctr-aes-caam,ghash-generic): ret=74
  alg: aead: Failed to load transform for gcm(aes): -2

on non-cache coherent systems, due to the fact that the GCM driver
passes an IV buffer by virtual address which shares a cacheline with
the auth_tag buffer passed via a scatterlist, resulting in corruption
of the auth_tag when the IV is updated while the DMA mapping is live.

Since the IV that is returned to the caller is only valid for CBC mode,
and given that the in-kernel users of CBC (such as CTS) don't trigger the
same issue as the GCM driver, let's just disable the output IV generation
for all modes except CBC for the time being.

Fixes: 854b06f768 ("crypto: caam - properly set IV after {en,de}crypt")
Cc: Horia Geanta <horia.geanta@nxp.com>
Cc: Iuliana Prodan <iuliana.prodan@nxp.com>
Reported-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:49 +02:00
Eric Biggers f157955962 crypto: ghash - fix unaligned memory access in ghash_setkey()
commit 5c6bc4dfa5 upstream.

Changing ghash_mod_init() to be subsys_initcall made it start running
before the alignment fault handler has been installed on ARM.  In kernel
builds where the keys in the ghash test vectors happened to be
misaligned in the kernel image, this exposed the longstanding bug that
ghash_setkey() is incorrectly casting the key buffer (which can have any
alignment) to be128 for passing to gf128mul_init_4k_lle().

Fix this by memcpy()ing the key to a temporary buffer.

Don't fix it by setting an alignmask on the algorithm instead because
that would unnecessarily force alignment of the data too.

Fixes: 2cdc6899a8 ("crypto: ghash - Add GHASH digest algorithm for GCM")
Reported-by: Peter Robinson <pbrobinson@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:49 +02:00
Finn Thain ef15dea684 scsi: mac_scsi: Fix pseudo DMA implementation, take 2
commit 78ff751f8e upstream.

A system bus error during a PDMA transfer can mess up the calculation of
the transfer residual (the PDMA handshaking hardware lacks a byte
counter). This results in data corruption.

The algorithm in this patch anticipates a bus error by starting each
transfer with a MOVE.B instruction. If a bus error is caught the transfer
will be retried. If a bus error is caught later in the transfer (for a
MOVE.W instruction) the transfer gets failed and subsequent requests for
that target will use PIO instead of PDMA.

This avoids the "!REQ and !ACK" error so the severity level of that message
is reduced to KERN_DEBUG.

Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org # v4.14+
Fixes: 3a0f64bfa9 ("mac_scsi: Fix pseudo DMA implementation")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reported-by: Chris Jones <chris@martin-jones.com>
Tested-by: Stan Johnson <userm57@yahoo.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:49 +02:00
Finn Thain 3df47088e7 scsi: mac_scsi: Increase PIO/PDMA transfer length threshold
commit 7398cee4c3 upstream.

Some targets introduce delays when handshaking the response to certain
commands. For example, a disk may send a 96-byte response to an INQUIRY
command (or a 24-byte response to a MODE SENSE command) too slowly.

Apparently the first 12 or 14 bytes are handshaked okay but then the system
bus error timeout is reached while transferring the next word.

Since the scsi bus phase hasn't changed, the driver then sets the target
borken flag to prevent further PDMA transfers. The driver also logs the
warning, "switching to slow handshake".

Raise the PDMA threshold to 512 bytes so that PIO transfers will be used
for these commands. This default is sufficiently low that PDMA will still
be used for READ and WRITE commands.

The existing threshold (16 bytes) was chosen more or less at random.
However, best performance requires the threshold to be as low as possible.
Those systems that don't need the PIO workaround at all may benefit from
mac_scsi.setup_use_pdma=1

Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: stable@vger.kernel.org # v4.14+
Fixes: 3a0f64bfa9 ("mac_scsi: Fix pseudo DMA implementation")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Stan Johnson <userm57@yahoo.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:49 +02:00
Shivasharan S 70644381cd scsi: megaraid_sas: Fix calculation of target ID
commit c8f96df5b8 upstream.

In megasas_get_target_prop(), driver is incorrectly calculating the target
ID for devices with channel 1 and 3.  Due to this, firmware will either
fail the command (if there is no device with the target id sent from
driver) or could return the properties for a target which was not
intended.  Devices could end up with the wrong queue depth due to this.

Fix target id calculation for channel 1 and 3.

Fixes: 96188a89cc ("scsi: megaraid_sas: NVME interface target prop added")
Cc: stable@vger.kernel.org
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:49 +02:00
Benjamin Block ab55998304 scsi: zfcp: fix request object use-after-free in send path causing wrong traces
commit 106d45f350 upstream.

When tracing instances where we open and close WKA ports, we also pass the
request-ID of the respective FSF command.

But after successfully sending the FSF command we must not use the
request-object anymore, as this might result in an use-after-free (see
"zfcp: fix request object use-after-free in send path causing seqno
errors" ).

To fix this add a new variable that caches the request-ID before sending
the request. This won't change during the hand-off to the FCP channel,
and so it's safe to trace this cached request-ID later, instead of using
the request object.

Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Fixes: d27a7cb919 ("zfcp: trace on request for open and close of WKA port")
Cc: <stable@vger.kernel.org> #2.6.38+
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:49 +02:00
Benjamin Block ef1f26bba1 scsi: zfcp: fix request object use-after-free in send path causing seqno errors
commit b76becde2b upstream.

With a recent change to our send path for FSF commands we introduced a
possible use-after-free of request-objects, that might further lead to
zfcp crafting bad requests, which the FCP channel correctly complains
about with an error (FSF_PROT_SEQ_NUMB_ERROR). This error is then handled
by an adapter-wide recovery.

The following sequence illustrates the possible use-after-free:

    Send Path:

        int zfcp_fsf_open_port(struct zfcp_erp_action *erp_action)
        {
                struct zfcp_fsf_req *req;
                ...
                spin_lock_irq(&qdio->req_q_lock);
        //                     ^^^^^^^^^^^^^^^^
        //                     protects QDIO queue during sending
                ...
                req = zfcp_fsf_req_create(qdio,
                                          FSF_QTCB_OPEN_PORT_WITH_DID,
                                          SBAL_SFLAGS0_TYPE_READ,
                                          qdio->adapter->pool.erp_req);
        //            ^^^^^^^^^^^^^^^^^^^
        //            allocation of the request-object
                ...
                retval = zfcp_fsf_req_send(req);
                ...
                spin_unlock_irq(&qdio->req_q_lock);
                return retval;
        }

        static int zfcp_fsf_req_send(struct zfcp_fsf_req *req)
        {
                struct zfcp_adapter *adapter = req->adapter;
                struct zfcp_qdio *qdio = adapter->qdio;
                ...
                zfcp_reqlist_add(adapter->req_list, req);
        //      ^^^^^^^^^^^^^^^^
        //      add request to our driver-internal hash-table for tracking
        //      (protected by separate lock req_list->lock)
                ...
                if (zfcp_qdio_send(qdio, &req->qdio_req)) {
        //          ^^^^^^^^^^^^^^
        //          hand-off the request to FCP channel;
        //          the request can complete at any point now
                        ...
                }

                /* Don't increase for unsolicited status */
                if (!zfcp_fsf_req_is_status_read_buffer(req))
        //           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
        //           possible use-after-free
                        adapter->fsf_req_seq_no++;
        //                       ^^^^^^^^^^^^^^^^
        //                       because of the use-after-free we might
        //                       miss this accounting, and as follow-up
        //                       this results in the FCP channel error
        //                       FSF_PROT_SEQ_NUMB_ERROR
                adapter->req_no++;

                return 0;
        }

        static inline bool
        zfcp_fsf_req_is_status_read_buffer(struct zfcp_fsf_req *req)
        {
                return req->qtcb == NULL;
        //             ^^^^^^^^^
        //             possible use-after-free
        }

    Response Path:

        void zfcp_fsf_reqid_check(struct zfcp_qdio *qdio, int sbal_idx)
        {
                ...
                struct zfcp_fsf_req *fsf_req;
                ...
                for (idx = 0; idx < QDIO_MAX_ELEMENTS_PER_BUFFER; idx++) {
                        ...
                        fsf_req = zfcp_reqlist_find_rm(adapter->req_list,
                                                       req_id);
        //                        ^^^^^^^^^^^^^^^^^^^^
        //                        remove request from our driver-internal
        //                        hash-table (lock req_list->lock)
                        ...
                        zfcp_fsf_req_complete(fsf_req);
                }
        }

        static void zfcp_fsf_req_complete(struct zfcp_fsf_req *req)
        {
                ...
                if (likely(req->status & ZFCP_STATUS_FSFREQ_CLEANUP))
                        zfcp_fsf_req_free(req);
        //              ^^^^^^^^^^^^^^^^^
        //              free memory for request-object
                else
                        complete(&req->completion);
        //              ^^^^^^^^
        //              completion notification for code-paths that wait
        //              synchronous for the completion of the request; in
        //              those the memory is freed separately
        }

The result of the use-after-free only affects the send path, and can not
lead to any data corruption. In case we miss the sequence-number
accounting, because the memory was already re-purposed, the next FSF
command will fail with said FCP channel error, and we will recover the
whole adapter. This causes no additional errors, but it slows down
traffic.  There is a slight chance of the same thing happen again
recursively after the adapter recovery, but so far this has not been seen.

This was seen under z/VM, where the send path might run on a virtual CPU
that gets scheduled away by z/VM, while the return path might still run,
and so create the necessary timing. Running with KASAN can also slow down
the kernel sufficiently to run into this user-after-free, and then see the
report by KASAN.

To fix this, simply pull the test for the sequence-number accounting in
front of the hand-off to the FCP channel (this information doesn't change
during hand-off), but leave the sequence-number accounting itself where it
is.

To make future regressions of the same kind less likely, add comments to
all closely related code-paths.

Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Fixes: f9eca02276 ("scsi: zfcp: drop duplicate fsf_command from zfcp_fsf_req which is also in QTCB header")
Cc: <stable@vger.kernel.org> #5.0+
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:48 +02:00
Damien Le Moal ecc31dda6f scsi: sd_zbc: Fix compilation warning
commit 0cdc58580b upstream.

kbuild test robot gets the following compilation warning using gcc 7.4
cross compilation for c6x (GCC_VERSION=7.4.0 make.cross ARCH=c6x).

   In file included from include/asm-generic/bug.h:18:0,
                    from arch/c6x/include/asm/bug.h:12,
                    from include/linux/bug.h:5,
                    from include/linux/thread_info.h:12,
                    from include/asm-generic/current.h:5,
                    from ./arch/c6x/include/generated/asm/current.h:1,
                    from include/linux/sched.h:12,
                    from include/linux/blkdev.h:5,
                    from drivers//scsi/sd_zbc.c:11:
   drivers//scsi/sd_zbc.c: In function 'sd_zbc_read_zones':
>> include/linux/kernel.h:62:48: warning: 'zone_blocks' may be used
   uninitialized in this function [-Wmaybe-uninitialized]
    #define __round_mask(x, y) ((__typeof__(x))((y)-1))
                                                   ^
   drivers//scsi/sd_zbc.c:464:6: note: 'zone_blocks' was declared here
     u32 zone_blocks;
         ^~~~~~~~~~~

This is a false-positive report. The variable zone_blocks is always
initialized in sd_zbc_check_zones() before use. It is not initialized
only and only if sd_zbc_check_zones() fails.

Avoid this warning by initializing the zone_blocks variable to 0.

Fixes: 5f832a3958 ("scsi: sd_zbc: Fix sd_zbc_check_zones() error checks")
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:48 +02:00
Ming Lei 80d4218201 scsi: core: Fix race on creating sense cache
commit f9b0530fa0 upstream.

When scsi_init_sense_cache(host) is called concurrently from different
hosts, each code path may find that no cache has been created and
allocate a new one. The lack of locking can lead to potentially
overriding a cache allocated by a different host.

Fix the issue by moving 'mutex_lock(&scsi_sense_cache_mutex)' before
scsi_select_sense_cache().

Fixes: 0a6ac4ee7c ("scsi: respect unchecked_isa_dma for blk-mq")
Cc: Stable <stable@vger.kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:48 +02:00
Finn Thain b2f215376e Revert "scsi: ncr5380: Increase register polling limit"
commit 25fcf94a2f upstream.

This reverts commit 4822827a69.

The purpose of that commit was to suppress a timeout warning message which
appeared to be caused by target latency. But suppressing the warning is
undesirable as the warning may indicate a messed up transfer count.

Another problem with that commit is that 15 ms is too long to keep
interrupts disabled as interrupt latency can cause system clock drift and
other problems.

Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: stable@vger.kernel.org
Fixes: 4822827a69 ("scsi: ncr5380: Increase register polling limit")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Stan Johnson <userm57@yahoo.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:48 +02:00
Finn Thain b9206a75c0 scsi: NCR5380: Handle PDMA failure reliably
commit f9dfed1c78 upstream.

A PDMA error is handled in the core driver by setting the device's 'borken'
flag and aborting the command. Unfortunately, do_abort() is not
dependable. Perform a SCSI bus reset instead, to make sure that the command
fails and gets retried.

Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: stable@vger.kernel.org # v4.20+
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Stan Johnson <userm57@yahoo.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:48 +02:00
Finn Thain bd91d5ceb8 scsi: NCR5380: Always re-enable reselection interrupt
commit 57f3132651 upstream.

The reselection interrupt gets disabled during selection and must be
re-enabled when hostdata->connected becomes NULL. If it isn't re-enabled a
disconnected command may time-out or the target may wedge the bus while
trying to reselect the host. This can happen after a command is aborted.

Fix this by enabling the reselection interrupt in NCR5380_main() after
calls to NCR5380_select() and NCR5380_information_transfer() return.

Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: stable@vger.kernel.org # v4.9+
Fixes: 8b00c3d5d4 ("ncr5380: Implement new eh_abort_handler")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Stan Johnson <userm57@yahoo.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:48 +02:00
Juergen Gross 6ef36ab967 xen: let alloc_xenballooned_pages() fail if not enough memory free
commit a1078e821b upstream.

Instead of trying to allocate pages with GFP_USER in
add_ballooned_pages() check the available free memory via
si_mem_available(). GFP_USER is far less limiting memory exhaustion
than the test via si_mem_available().

This will avoid dom0 running out of memory due to excessive foreign
page mappings especially on ARM and on x86 in PVH mode, as those don't
have a pre-ballooned area which can be used for foreign mappings.

As the normal ballooning suffers from the same problem don't balloon
down more than si_mem_available() pages in one iteration. At the same
time limit the default maximum number of retries.

This is part of XSA-300.

Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26 09:10:48 +02:00
Denis Efremov d39c2e9727 floppy: fix out-of-bounds read in copy_buffer
[ Upstream commit da99466ac2 ]

This fixes a global out-of-bounds read access in the copy_buffer
function of the floppy driver.

The FDDEFPRM ioctl allows one to set the geometry of a disk.  The sect
and head fields (unsigned int) of the floppy_drive structure are used to
compute the max_sector (int) in the make_raw_rw_request function.  It is
possible to overflow the max_sector.  Next, max_sector is passed to the
copy_buffer function and used in one of the memcpy calls.

An unprivileged user could trigger the bug if the device is accessible,
but requires a floppy disk to be inserted.

The patch adds the check for the .sect * .head multiplication for not
overflowing in the set_geometry function.

The bug was found by syzkaller.

Signed-off-by: Denis Efremov <efremov@ispras.ru>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:48 +02:00
Denis Efremov 0f2e88b700 floppy: fix invalid pointer dereference in drive_name
[ Upstream commit 9b04609b78 ]

This fixes the invalid pointer dereference in the drive_name function of
the floppy driver.

The native_format field of the struct floppy_drive_params is used as
floppy_type array index in the drive_name function.  Thus, the field
should be checked the same way as the autodetect field.

To trigger the bug, one could use a value out of range and set the drive
parameters with the FDSETDRVPRM ioctl.  Next, FDGETDRVTYP ioctl should
be used to call the drive_name.  A floppy disk is not required to be
inserted.

CAP_SYS_ADMIN is required to call FDSETDRVPRM.

The patch adds the check for a value of the native_format field to be in
the '0 <= x < ARRAY_SIZE(floppy_type)' range of the floppy_type array
indices.

The bug was found by syzkaller.

Signed-off-by: Denis Efremov <efremov@ispras.ru>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:47 +02:00
Denis Efremov ad839534e9 floppy: fix out-of-bounds read in next_valid_format
[ Upstream commit 5635f897ed ]

This fixes a global out-of-bounds read access in the next_valid_format
function of the floppy driver.

The values from autodetect field of the struct floppy_drive_params are
used as indices for the floppy_type array in the next_valid_format
function 'floppy_type[DP->autodetect[probed_format]].sect'.

To trigger the bug, one could use a value out of range and set the drive
parameters with the FDSETDRVPRM ioctl.  A floppy disk is not required to
be inserted.

CAP_SYS_ADMIN is required to call FDSETDRVPRM.

The patch adds the check for values of the autodetect field to be in the
'0 <= x < ARRAY_SIZE(floppy_type)' range of the floppy_type array indices.

The bug was found by syzkaller.

Signed-off-by: Denis Efremov <efremov@ispras.ru>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:47 +02:00
Denis Efremov 697c0af746 floppy: fix div-by-zero in setup_format_params
[ Upstream commit f3554aeb99 ]

This fixes a divide by zero error in the setup_format_params function of
the floppy driver.

Two consecutive ioctls can trigger the bug: The first one should set the
drive geometry with such .sect and .rate values for the F_SECT_PER_TRACK
to become zero.  Next, the floppy format operation should be called.

A floppy disk is not required to be inserted.  An unprivileged user
could trigger the bug if the device is accessible.

The patch checks F_SECT_PER_TRACK for a non-zero value in the
set_geometry function.  The proper check should involve a reasonable
upper limit for the .sect and .rate fields, but it could change the
UAPI.

The patch also checks F_SECT_PER_TRACK in the setup_format_params, and
cancels the formatting operation in case of zero.

The bug was found by syzkaller.

Signed-off-by: Denis Efremov <efremov@ispras.ru>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:47 +02:00
Andrii Nakryiko d092fcf1d7 libbpf: fix another GCC8 warning for strncpy
[ Upstream commit 763ff0e7d9 ]

Similar issue was fixed in cdfc7f888c ("libbpf: fix GCC8 warning for
strncpy") already. This one was missed. Fixing now.

Cc: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:47 +02:00
Dennis Zhou dc2fc59d28 blk-iolatency: fix STS_AGAIN handling
[ Upstream commit c9b3007fec ]

The iolatency controller is based on rq_qos. It increments on
rq_qos_throttle() and decrements on either rq_qos_cleanup() or
rq_qos_done_bio(). a3fb01ba5a fixes the double accounting issue where
blk_mq_make_request() may call both rq_qos_cleanup() and
rq_qos_done_bio() on REQ_NO_WAIT. So checking STS_AGAIN prevents the
double decrement.

The above works upstream as the only way we can get STS_AGAIN is from
blk_mq_get_request() failing. The STS_AGAIN handling isn't a real
problem as bio_endio() skipping only happens on reserved tag allocation
failures which can only be caused by driver bugs and already triggers
WARN.

However, the fix creates a not so great dependency on how STS_AGAIN can
be propagated. Internally, we (Facebook) carry a patch that kills read
ahead if a cgroup is io congested or a fatal signal is pending. This
combined with chained bios progagate their bi_status to the parent is
not already set can can cause the parent bio to not clean up properly
even though it was successful. This consequently leaks the inflight
counter and can hang all IOs under that blkg.

To nip the adverse interaction early, this removes the rq_qos_cleanup()
callback in iolatency in favor of cleaning up always on the
rq_qos_done_bio() path.

Fixes: a3fb01ba5a ("blk-iolatency: only account submitted bios")
Debugged-by: Tejun Heo <tj@kernel.org>
Debugged-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:47 +02:00
Colin Ian King 524659fbd3 iavf: fix dereference of null rx_buffer pointer
[ Upstream commit 9fe06a5128 ]

A recent commit efa14c3985 ("iavf: allow null RX descriptors") added
a null pointer sanity check on rx_buffer, however, rx_buffer is being
dereferenced before that check, which implies a null pointer dereference
bug can potentially occur.  Fix this by only dereferencing rx_buffer
until after the null pointer check.

Addresses-Coverity: ("Dereference before null check")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:47 +02:00
Huazhong Tan 9c1de3cca1 net: hns3: fix __QUEUE_STATE_STACK_XOFF not cleared issue
[ Upstream commit f96315f2f1 ]

When change MTU or other operations, which just calling .reset_notify
to do HNAE3_DOWN_CLIENT and HNAE3_UP_CLIENT, then
the netdev_tx_reset_queue() in the hns3_clear_all_ring() will be
ignored. So the dev_watchdog() may misdiagnose a TX timeout.

This patch separates netdev_tx_reset_queue() from
hns3_clear_all_ring(), and unifies hns3_clear_all_ring() and
hns3_force_clear_all_ring into one, since they are doing
similar things.

Fixes: 3a30964a2e ("net: hns3: delay ring buffer clearing during reset")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:47 +02:00
Josua Mayer 34dd96bd7b net: mvmdio: defer probe of orion-mdio if a clock is not ready
[ Upstream commit 433a06d7d7 ]

Defer probing of the orion-mdio interface when getting a clock returns
EPROBE_DEFER. This avoids locking up the Armada 8k SoC when mdio is used
before all clocks have been enabled.

Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:46 +02:00
Ilya Maximets 8a090e3b73 xdp: fix race on generic receive path
[ Upstream commit bf0bdd1343 ]

Unlike driver mode, generic xdp receive could be triggered
by different threads on different CPU cores at the same time
leading to the fill and rx queue breakage. For example, this
could happen while sending packets from two processes to the
first interface of veth pair while the second part of it is
open with AF_XDP socket.

Need to take a lock for each generic receive to avoid race.

Fixes: c497176cb2 ("xsk: add Rx receive functions and poll support")
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Tested-by: William Tu <u9012063@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:46 +02:00
Taehee Yoo 549348f1db gtp: fix use-after-free in gtp_newlink()
[ Upstream commit a2bed90704 ]

Current gtp_newlink() could be called after unregister_pernet_subsys().
gtp_newlink() uses gtp_net but it can be destroyed by
unregister_pernet_subsys().
So unregister_pernet_subsys() should be called after
rtnl_link_unregister().

Test commands:
   #SHELL 1
   while :
   do
	   for i in {1..5}
	   do
		./gtp-link add gtp$i &
	   done
	   killall gtp-link
   done

   #SHELL 2
   while :
   do
	modprobe -rv gtp
   done

Splat looks like:
[  753.176631] BUG: KASAN: use-after-free in gtp_newlink+0x9b4/0xa5c [gtp]
[  753.177722] Read of size 8 at addr ffff8880d48f2458 by task gtp-link/7126
[  753.179082] CPU: 0 PID: 7126 Comm: gtp-link Tainted: G        W         5.2.0-rc6+ #50
[  753.185801] Call Trace:
[  753.186264]  dump_stack+0x7c/0xbb
[  753.186863]  ? gtp_newlink+0x9b4/0xa5c [gtp]
[  753.187583]  print_address_description+0xc7/0x240
[  753.188382]  ? gtp_newlink+0x9b4/0xa5c [gtp]
[  753.189097]  ? gtp_newlink+0x9b4/0xa5c [gtp]
[  753.189846]  __kasan_report+0x12a/0x16f
[  753.190542]  ? gtp_newlink+0x9b4/0xa5c [gtp]
[  753.191298]  kasan_report+0xe/0x20
[  753.191893]  gtp_newlink+0x9b4/0xa5c [gtp]
[  753.192580]  ? __netlink_ns_capable+0xc3/0xf0
[  753.193370]  __rtnl_newlink+0xb9f/0x11b0
[ ... ]
[  753.241201] Allocated by task 7186:
[  753.241844]  save_stack+0x19/0x80
[  753.242399]  __kasan_kmalloc.constprop.3+0xa0/0xd0
[  753.243192]  __kmalloc+0x13e/0x300
[  753.243764]  ops_init+0xd6/0x350
[  753.244314]  register_pernet_operations+0x249/0x6f0
[ ... ]
[  753.251770] Freed by task 7178:
[  753.252288]  save_stack+0x19/0x80
[  753.252833]  __kasan_slab_free+0x111/0x150
[  753.253962]  kfree+0xc7/0x280
[  753.254509]  ops_free_list.part.11+0x1c4/0x2d0
[  753.255241]  unregister_pernet_operations+0x262/0x390
[ ... ]
[  753.285883] list_add corruption. next->prev should be prev (ffff8880d48f2458), but was ffff8880d497d878. (next.
[  753.287241] ------------[ cut here ]------------
[  753.287794] kernel BUG at lib/list_debug.c:25!
[  753.288364] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[  753.289099] CPU: 0 PID: 7126 Comm: gtp-link Tainted: G    B   W         5.2.0-rc6+ #50
[  753.291036] RIP: 0010:__list_add_valid+0x74/0xd0
[  753.291589] Code: 48 39 da 75 27 48 39 f5 74 36 48 39 dd 74 31 48 83 c4 08 b8 01 00 00 00 5b 5d c3 48 89 d9 48b
[  753.293779] RSP: 0018:ffff8880cae8f398 EFLAGS: 00010286
[  753.294401] RAX: 0000000000000075 RBX: ffff8880d497d878 RCX: 0000000000000000
[  753.296260] RDX: 0000000000000075 RSI: 0000000000000008 RDI: ffffed10195d1e69
[  753.297070] RBP: ffff8880cd250ae0 R08: ffffed101b4bff21 R09: ffffed101b4bff21
[  753.297899] R10: 0000000000000001 R11: ffffed101b4bff20 R12: ffff8880d497d878
[  753.298703] R13: 0000000000000000 R14: ffff8880cd250ae0 R15: ffff8880d48f2458
[  753.299564] FS:  00007f5f79805740(0000) GS:ffff8880da400000(0000) knlGS:0000000000000000
[  753.300533] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  753.301231] CR2: 00007fe8c7ef4f10 CR3: 00000000b71a6006 CR4: 00000000000606f0
[  753.302183] Call Trace:
[  753.302530]  gtp_newlink+0x5f6/0xa5c [gtp]
[  753.303037]  ? __netlink_ns_capable+0xc3/0xf0
[  753.303576]  __rtnl_newlink+0xb9f/0x11b0
[  753.304092]  ? rtnl_link_unregister+0x230/0x230

Fixes: 459aa660eb ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:46 +02:00
Taehee Yoo 98446288d0 gtp: fix use-after-free in gtp_encap_destroy()
[ Upstream commit 1788b8569f ]

gtp_encap_destroy() is called twice.
1. When interface is deleted.
2. When udp socket is destroyed.
either gtp->sk0 or gtp->sk1u could be freed by sock_put() in
gtp_encap_destroy(). so, when gtp_encap_destroy() is called again,
it would uses freed sk pointer.

patch makes gtp_encap_destroy() to set either gtp->sk0 or gtp->sk1u to
null. in addition, both gtp->sk0 and gtp->sk1u pointer are protected
by rtnl_lock. so, rtnl_lock() is added.

Test command:
   gtp-link add gtp1 &
   killall gtp-link
   ip link del gtp1

Splat looks like:
[   83.182767] BUG: KASAN: use-after-free in __lock_acquire+0x3a20/0x46a0
[   83.184128] Read of size 8 at addr ffff8880cc7d5360 by task ip/1008
[   83.185567] CPU: 1 PID: 1008 Comm: ip Not tainted 5.2.0-rc6+ #50
[   83.188469] Call Trace:
[ ... ]
[   83.200126]  lock_acquire+0x141/0x380
[   83.200575]  ? lock_sock_nested+0x3a/0xf0
[   83.201069]  _raw_spin_lock_bh+0x38/0x70
[   83.201551]  ? lock_sock_nested+0x3a/0xf0
[   83.202044]  lock_sock_nested+0x3a/0xf0
[   83.202520]  gtp_encap_destroy+0x18/0xe0 [gtp]
[   83.203065]  gtp_encap_disable.isra.14+0x13/0x50 [gtp]
[   83.203687]  gtp_dellink+0x56/0x170 [gtp]
[   83.204190]  rtnl_delete_link+0xb4/0x100
[ ... ]
[   83.236513] Allocated by task 976:
[   83.236925]  save_stack+0x19/0x80
[   83.237332]  __kasan_kmalloc.constprop.3+0xa0/0xd0
[   83.237894]  kmem_cache_alloc+0xd8/0x280
[   83.238360]  sk_prot_alloc.isra.42+0x50/0x200
[   83.238874]  sk_alloc+0x32/0x940
[   83.239264]  inet_create+0x283/0xc20
[   83.239684]  __sock_create+0x2dd/0x540
[   83.240136]  __sys_socket+0xca/0x1a0
[   83.240550]  __x64_sys_socket+0x6f/0xb0
[   83.240998]  do_syscall_64+0x9c/0x450
[   83.241466]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   83.242061]
[   83.242249] Freed by task 0:
[   83.242616]  save_stack+0x19/0x80
[   83.243013]  __kasan_slab_free+0x111/0x150
[   83.243498]  kmem_cache_free+0x89/0x250
[   83.244444]  __sk_destruct+0x38f/0x5a0
[   83.245366]  rcu_core+0x7e9/0x1c20
[   83.245766]  __do_softirq+0x213/0x8fa

Fixes: 1e3a3abd8b ("gtp: make GTP sockets in gtp_newlink optional")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:46 +02:00
Taehee Yoo 972c6e23fa gtp: fix Illegal context switch in RCU read-side critical section.
[ Upstream commit 3f167e1921 ]

ipv4_pdp_add() is called in RCU read-side critical section.
So GFP_KERNEL should not be used in the function.
This patch make ipv4_pdp_add() to use GFP_ATOMIC instead of GFP_KERNEL.

Test commands:
gtp-link add gtp1 &
gtp-tunnel add gtp1 v1 100 200 1.1.1.1 2.2.2.2

Splat looks like:
[  130.618881] =============================
[  130.626382] WARNING: suspicious RCU usage
[  130.626994] 5.2.0-rc6+ #50 Not tainted
[  130.627622] -----------------------------
[  130.628223] ./include/linux/rcupdate.h:266 Illegal context switch in RCU read-side critical section!
[  130.629684]
[  130.629684] other info that might help us debug this:
[  130.629684]
[  130.631022]
[  130.631022] rcu_scheduler_active = 2, debug_locks = 1
[  130.632136] 4 locks held by gtp-tunnel/1025:
[  130.632925]  #0: 000000002b93c8b7 (cb_lock){++++}, at: genl_rcv+0x15/0x40
[  130.634159]  #1: 00000000f17bc999 (genl_mutex){+.+.}, at: genl_rcv_msg+0xfb/0x130
[  130.635487]  #2: 00000000c644ed8e (rtnl_mutex){+.+.}, at: gtp_genl_new_pdp+0x18c/0x1150 [gtp]
[  130.636936]  #3: 0000000007a1cde7 (rcu_read_lock){....}, at: gtp_genl_new_pdp+0x187/0x1150 [gtp]
[  130.638348]
[  130.638348] stack backtrace:
[  130.639062] CPU: 1 PID: 1025 Comm: gtp-tunnel Not tainted 5.2.0-rc6+ #50
[  130.641318] Call Trace:
[  130.641707]  dump_stack+0x7c/0xbb
[  130.642252]  ___might_sleep+0x2c0/0x3b0
[  130.642862]  kmem_cache_alloc_trace+0x1cd/0x2b0
[  130.643591]  gtp_genl_new_pdp+0x6c5/0x1150 [gtp]
[  130.644371]  genl_family_rcv_msg+0x63a/0x1030
[  130.645074]  ? mutex_lock_io_nested+0x1090/0x1090
[  130.645845]  ? genl_unregister_family+0x630/0x630
[  130.646592]  ? debug_show_all_locks+0x2d0/0x2d0
[  130.647293]  ? check_flags.part.40+0x440/0x440
[  130.648099]  genl_rcv_msg+0xa3/0x130
[ ... ]

Fixes: 459aa660eb ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:46 +02:00
Taehee Yoo 76357f65f1 gtp: fix suspicious RCU usage
[ Upstream commit e198987e7d ]

gtp_encap_enable_socket() and gtp_encap_destroy() are not protected
by rcu_read_lock(). and it's not safe to write sk->sk_user_data.
This patch make these functions to use lock_sock() instead of
rcu_dereference_sk_user_data().

Test commands:
    gtp-link add gtp1

Splat looks like:
[   83.238315] =============================
[   83.239127] WARNING: suspicious RCU usage
[   83.239702] 5.2.0-rc6+ #49 Not tainted
[   83.240268] -----------------------------
[   83.241205] drivers/net/gtp.c:799 suspicious rcu_dereference_check() usage!
[   83.243828]
[   83.243828] other info that might help us debug this:
[   83.243828]
[   83.246325]
[   83.246325] rcu_scheduler_active = 2, debug_locks = 1
[   83.247314] 1 lock held by gtp-link/1008:
[   83.248523]  #0: 0000000017772c7f (rtnl_mutex){+.+.}, at: __rtnl_newlink+0x5f5/0x11b0
[   83.251503]
[   83.251503] stack backtrace:
[   83.252173] CPU: 0 PID: 1008 Comm: gtp-link Not tainted 5.2.0-rc6+ #49
[   83.253271] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   83.254562] Call Trace:
[   83.254995]  dump_stack+0x7c/0xbb
[   83.255567]  gtp_encap_enable_socket+0x2df/0x360 [gtp]
[   83.256415]  ? gtp_find_dev+0x1a0/0x1a0 [gtp]
[   83.257161]  ? memset+0x1f/0x40
[   83.257843]  gtp_newlink+0x90/0xa21 [gtp]
[   83.258497]  ? __netlink_ns_capable+0xc3/0xf0
[   83.259260]  __rtnl_newlink+0xb9f/0x11b0
[   83.260022]  ? rtnl_link_unregister+0x230/0x230
[ ... ]

Fixes: 1e3a3abd8b ("gtp: make GTP sockets in gtp_newlink optional")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:46 +02:00
csonsino 33401f6ba0 Bluetooth: validate BLE connection interval updates
[ Upstream commit c49a8682fc ]

Problem: The Linux Bluetooth stack yields complete control over the BLE
connection interval to the remote device.

The Linux Bluetooth stack provides access to the BLE connection interval
min and max values through /sys/kernel/debug/bluetooth/hci0/
conn_min_interval and /sys/kernel/debug/bluetooth/hci0/conn_max_interval.
These values are used for initial BLE connections, but the remote device
has the ability to request a connection parameter update. In the event
that the remote side requests to change the connection interval, the Linux
kernel currently only validates that the desired value is within the
acceptable range in the Bluetooth specification (6 - 3200, corresponding to
7.5ms - 4000ms). There is currently no validation that the desired value
requested by the remote device is within the min/max limits specified in
the conn_min_interval/conn_max_interval configurations. This essentially
leads to Linux yielding complete control over the connection interval to
the remote device.

The proposed patch adds a verification step to the connection parameter
update mechanism, ensuring that the desired value is within the min/max
bounds of the current connection. If the desired value is outside of the
current connection min/max values, then the connection parameter update
request is rejected and the negative response is returned to the remote
device. Recall that the initial connection is established using the local
conn_min_interval/conn_max_interval values, so this allows the Linux
administrator to retain control over the BLE connection interval.

The one downside that I see is that the current default Linux values for
conn_min_interval and conn_max_interval typically correspond to 30ms and
50ms respectively. If this change were accepted, then it is feasible that
some devices would no longer be able to negotiate to their desired
connection interval values. This might be remedied by setting the default
Linux conn_min_interval and conn_max_interval values to the widest
supported range (6 - 3200 / 7.5ms - 4000ms). This could lead to the same
behavior as the current implementation, where the remote device could
request to change the connection interval value to any value that is
permitted by the Bluetooth specification, and Linux would accept the
desired value.

Signed-off-by: Carey Sonsino <csonsino@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:46 +02:00
Taehee Yoo cbdc30d728 gtp: add missing gtp_encap_disable_sock() in gtp_encap_enable()
[ Upstream commit e30155fd23 ]

If an invalid role is sent from user space, gtp_encap_enable() will fail.
Then, it should call gtp_encap_disable_sock() but current code doesn't.
It makes memory leak.

Fixes: 91ed81f9ab ("gtp: support SGSN-side tunnels")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:45 +02:00
Dan Carpenter 684392e5bc Bluetooth: hidp: NUL terminate a string in the compat ioctl
[ Upstream commit dcae9052eb ]

This change is similar to commit a1616a5ac9 ("Bluetooth: hidp: fix
buffer overflow") but for the compat ioctl.  We take a string from the
user and forgot to ensure that it's NUL terminated.

I have also changed the strncpy() in to strscpy() in hidp_setup_hid().
The difference is the strncpy() doesn't necessarily NUL terminate the
destination string.  Either change would fix the problem but it's nice
to take a belt and suspenders approach and do both.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:45 +02:00
Matias Karhumaa 497bd28c0f Bluetooth: Check state in l2cap_disconnect_rsp
[ Upstream commit 28261da8a2 ]

Because of both sides doing L2CAP disconnection at the same time, it
was possible to receive L2CAP Disconnection Response with CID that was
already freed. That caused problems if CID was already reused and L2CAP
Connection Request with same CID was sent out. Before this patch kernel
deleted channel context regardless of the state of the channel.

Example where leftover Disconnection Response (frame #402) causes local
device to delete L2CAP channel which was not yet connected. This in
turn confuses remote device's stack because same CID is re-used without
properly disconnecting.

Btmon capture before patch:
** snip **
> ACL Data RX: Handle 43 flags 0x02 dlen 8                #394 [hci1] 10.748949
      Channel: 65 len 4 [PSM 3 mode 0] {chan 2}
      RFCOMM: Disconnect (DISC) (0x43)
         Address: 0x03 cr 1 dlci 0x00
         Control: 0x53 poll/final 1
         Length: 0
         FCS: 0xfd
< ACL Data TX: Handle 43 flags 0x00 dlen 8                #395 [hci1] 10.749062
      Channel: 65 len 4 [PSM 3 mode 0] {chan 2}
      RFCOMM: Unnumbered Ack (UA) (0x63)
         Address: 0x03 cr 1 dlci 0x00
         Control: 0x73 poll/final 1
         Length: 0
         FCS: 0xd7
< ACL Data TX: Handle 43 flags 0x00 dlen 12               #396 [hci1] 10.749073
      L2CAP: Disconnection Request (0x06) ident 17 len 4
        Destination CID: 65
        Source CID: 65
> HCI Event: Number of Completed Packets (0x13) plen 5    #397 [hci1] 10.752391
        Num handles: 1
        Handle: 43
        Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5    #398 [hci1] 10.753394
        Num handles: 1
        Handle: 43
        Count: 1
> ACL Data RX: Handle 43 flags 0x02 dlen 12               #399 [hci1] 10.756499
      L2CAP: Disconnection Request (0x06) ident 26 len 4
        Destination CID: 65
        Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 12               #400 [hci1] 10.756548
      L2CAP: Disconnection Response (0x07) ident 26 len 4
        Destination CID: 65
        Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 12               #401 [hci1] 10.757459
      L2CAP: Connection Request (0x02) ident 18 len 4
        PSM: 1 (0x0001)
        Source CID: 65
> ACL Data RX: Handle 43 flags 0x02 dlen 12               #402 [hci1] 10.759148
      L2CAP: Disconnection Response (0x07) ident 17 len 4
        Destination CID: 65
        Source CID: 65
= bluetoothd: 00:1E:AB:4C:56:54: error updating services: Input/o..   10.759447
> HCI Event: Number of Completed Packets (0x13) plen 5    #403 [hci1] 10.759386
        Num handles: 1
        Handle: 43
        Count: 1
> ACL Data RX: Handle 43 flags 0x02 dlen 12               #404 [hci1] 10.760397
      L2CAP: Connection Request (0x02) ident 27 len 4
        PSM: 3 (0x0003)
        Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 16               #405 [hci1] 10.760441
      L2CAP: Connection Response (0x03) ident 27 len 8
        Destination CID: 65
        Source CID: 65
        Result: Connection successful (0x0000)
        Status: No further information available (0x0000)
< ACL Data TX: Handle 43 flags 0x00 dlen 27               #406 [hci1] 10.760449
      L2CAP: Configure Request (0x04) ident 19 len 19
        Destination CID: 65
        Flags: 0x0000
        Option: Maximum Transmission Unit (0x01) [mandatory]
          MTU: 1013
        Option: Retransmission and Flow Control (0x04) [mandatory]
          Mode: Basic (0x00)
          TX window size: 0
          Max transmit: 0
          Retransmission timeout: 0
          Monitor timeout: 0
          Maximum PDU size: 0
> HCI Event: Number of Completed Packets (0x13) plen 5    #407 [hci1] 10.761399
        Num handles: 1
        Handle: 43
        Count: 1
> ACL Data RX: Handle 43 flags 0x02 dlen 16               #408 [hci1] 10.762942
      L2CAP: Connection Response (0x03) ident 18 len 8
        Destination CID: 66
        Source CID: 65
        Result: Connection successful (0x0000)
        Status: No further information available (0x0000)
*snip*

Similar case after the patch:
*snip*
> ACL Data RX: Handle 43 flags 0x02 dlen 8            #22702 [hci0] 1664.411056
      Channel: 65 len 4 [PSM 3 mode 0] {chan 3}
      RFCOMM: Disconnect (DISC) (0x43)
         Address: 0x03 cr 1 dlci 0x00
         Control: 0x53 poll/final 1
         Length: 0
         FCS: 0xfd
< ACL Data TX: Handle 43 flags 0x00 dlen 8            #22703 [hci0] 1664.411136
      Channel: 65 len 4 [PSM 3 mode 0] {chan 3}
      RFCOMM: Unnumbered Ack (UA) (0x63)
         Address: 0x03 cr 1 dlci 0x00
         Control: 0x73 poll/final 1
         Length: 0
         FCS: 0xd7
< ACL Data TX: Handle 43 flags 0x00 dlen 12           #22704 [hci0] 1664.411143
      L2CAP: Disconnection Request (0x06) ident 11 len 4
        Destination CID: 65
        Source CID: 65
> HCI Event: Number of Completed Pac.. (0x13) plen 5  #22705 [hci0] 1664.414009
        Num handles: 1
        Handle: 43
        Count: 1
> HCI Event: Number of Completed Pac.. (0x13) plen 5  #22706 [hci0] 1664.415007
        Num handles: 1
        Handle: 43
        Count: 1
> ACL Data RX: Handle 43 flags 0x02 dlen 12           #22707 [hci0] 1664.418674
      L2CAP: Disconnection Request (0x06) ident 17 len 4
        Destination CID: 65
        Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 12           #22708 [hci0] 1664.418762
      L2CAP: Disconnection Response (0x07) ident 17 len 4
        Destination CID: 65
        Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 12           #22709 [hci0] 1664.421073
      L2CAP: Connection Request (0x02) ident 12 len 4
        PSM: 1 (0x0001)
        Source CID: 65
> ACL Data RX: Handle 43 flags 0x02 dlen 12           #22710 [hci0] 1664.421371
      L2CAP: Disconnection Response (0x07) ident 11 len 4
        Destination CID: 65
        Source CID: 65
> HCI Event: Number of Completed Pac.. (0x13) plen 5  #22711 [hci0] 1664.424082
        Num handles: 1
        Handle: 43
        Count: 1
> HCI Event: Number of Completed Pac.. (0x13) plen 5  #22712 [hci0] 1664.425040
        Num handles: 1
        Handle: 43
        Count: 1
> ACL Data RX: Handle 43 flags 0x02 dlen 12           #22713 [hci0] 1664.426103
      L2CAP: Connection Request (0x02) ident 18 len 4
        PSM: 3 (0x0003)
        Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 16           #22714 [hci0] 1664.426186
      L2CAP: Connection Response (0x03) ident 18 len 8
        Destination CID: 66
        Source CID: 65
        Result: Connection successful (0x0000)
        Status: No further information available (0x0000)
< ACL Data TX: Handle 43 flags 0x00 dlen 27           #22715 [hci0] 1664.426196
      L2CAP: Configure Request (0x04) ident 13 len 19
        Destination CID: 65
        Flags: 0x0000
        Option: Maximum Transmission Unit (0x01) [mandatory]
          MTU: 1013
        Option: Retransmission and Flow Control (0x04) [mandatory]
          Mode: Basic (0x00)
          TX window size: 0
          Max transmit: 0
          Retransmission timeout: 0
          Monitor timeout: 0
          Maximum PDU size: 0
> ACL Data RX: Handle 43 flags 0x02 dlen 16           #22716 [hci0] 1664.428804
      L2CAP: Connection Response (0x03) ident 12 len 8
        Destination CID: 66
        Source CID: 65
        Result: Connection successful (0x0000)
        Status: No further information available (0x0000)
*snip*

Fix is to check that channel is in state BT_DISCONN before deleting the
channel.

This bug was found while fuzzing Bluez's OBEX implementation using
Synopsys Defensics.

Reported-by: Matti Kamunen <matti.kamunen@synopsys.com>
Reported-by: Ari Timonen <ari.timonen@synopsys.com>
Signed-off-by: Matias Karhumaa <matias.karhumaa@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:45 +02:00
Seeteena Thoufeek 0b49c8a5fa perf tests: Fix record+probe_libc_inet_pton.sh for powerpc64
[ Upstream commit bff5a556c1 ]

'probe libc's inet_pton & backtrace it with ping' testcase sometimes
fails on powerpc because distro ping binary does not have symbol
information and thus it prints "[unknown]" function name in the
backtrace.

Accept "[unknown]" as valid function name for powerpc as well.

 # perf test -v "probe libc's inet_pton & backtrace it with ping"

Before:

  59: probe libc's inet_pton & backtrace it with ping       :
  --- start ---
  test child forked, pid 79695
  ping 79718 [077] 96483.787025: probe_libc:inet_pton: (7fff83a754c8)
  7fff83a754c8 __GI___inet_pton+0x8 (/usr/lib64/power9/libc-2.28.so)
  7fff83a2b7a0 gaih_inet.constprop.7+0x1020
  (/usr/lib64/power9/libc-2.28.so)
  7fff83a2c170 getaddrinfo+0x160 (/usr/lib64/power9/libc-2.28.so)
  1171830f4 [unknown] (/usr/bin/ping)
  FAIL: expected backtrace entry
  ".*\+0x[[:xdigit:]]+[[:space:]]\(.*/bin/ping.*\)$"
  got "1171830f4 [unknown] (/usr/bin/ping)"
  test child finished with -1
  ---- end ----
  probe libc's inet_pton & backtrace it with ping: FAILED!

After:

  59: probe libc's inet_pton & backtrace it with ping       :
  --- start ---
  test child forked, pid 79085
  ping 79108 [045] 96400.214177: probe_libc:inet_pton: (7fffbb9654c8)
  7fffbb9654c8 __GI___inet_pton+0x8 (/usr/lib64/power9/libc-2.28.so)
  7fffbb91b7a0 gaih_inet.constprop.7+0x1020
  (/usr/lib64/power9/libc-2.28.so)
  7fffbb91c170 getaddrinfo+0x160 (/usr/lib64/power9/libc-2.28.so)
  132e830f4 [unknown] (/usr/bin/ping)
  test child finished with 0
  ---- end ----
  probe libc's inet_pton & backtrace it with ping: Ok

Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Reviewed-by: Kim Phillips <kim.phillips@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Fixes: 1632936480 ("perf tests: Fix record+probe_libc_inet_pton.sh without ping's debuginfo")
Link: http://lkml.kernel.org/r/1561630614-3216-1-git-send-email-s1seetee@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:45 +02:00
Shijith Thotton 75b0fe8772 genirq: Update irq stats from NMI handlers
[ Upstream commit c09cb12935 ]

The NMI handlers handle_percpu_devid_fasteoi_nmi() and handle_fasteoi_nmi()
do not update the interrupt counts. Due to that the NMI interrupt count
does not show up correctly in /proc/interrupts.

Add the statistics and treat the NMI handlers in the same way as per cpu
interrupts and prevent them from updating irq_desc::tot_count as this might
be corrupted due to concurrency.

[ tglx: Massaged changelog ]

Fixes: 2dcf1fbcad ("genirq: Provide NMI handlers")
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1562313336-11888-1-git-send-email-sthotton@marvell.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:45 +02:00
Josua Mayer 5dface2ce2 Bluetooth: 6lowpan: search for destination address in all peers
[ Upstream commit b188b03270 ]

Handle overlooked case where the target address is assigned to a peer
and neither route nor gateway exist.

For one peer, no checks are performed to see if it is meant to receive
packets for a given address.

As soon as there is a second peer however, checks are performed
to deal with routes and gateways for handling complex setups with
multiple hops to a target address.
This logic assumed that no route and no gateway imply that the
destination address can not be reached, which is false in case of a
direct peer.

Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Tested-by: Michael Scott <mike@foundries.io>
Signed-off-by: Josua Mayer <josua.mayer@jm0.eu>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:45 +02:00
João Paulo Rechi Vita e7de2b6a3d Bluetooth: Add new 13d3:3501 QCA_ROME device
[ Upstream commit 881cec4f6b ]

Without the QCA ROME setup routine this adapter fails to establish a SCO
connection.

T:  Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3501 Rev=00.01
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#=0x1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:45 +02:00
João Paulo Rechi Vita 78dd5ae315 Bluetooth: Add new 13d3:3491 QCA_ROME device
[ Upstream commit 44d34af2e4 ]

Without the QCA ROME setup routine this adapter fails to establish a SCO
connection.

T:  Bus=01 Lev=01 Prnt=01 Port=08 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3491 Rev=00.01
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#=0x1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:44 +02:00
Tomas Bortoli b3f0f22055 Bluetooth: hci_bcsp: Fix memory leak in rx_skb
[ Upstream commit 4ce9146e03 ]

Syzkaller found that it is possible to provoke a memory leak by
never freeing rx_skb in struct bcsp_struct.

Fix by freeing in bcsp_close()

Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com>
Reported-by: syzbot+98162c885993b72f19c4@syzkaller.appspotmail.com
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:44 +02:00
Jian Shen a5635e3d5a net: hns3: fix port capbility updating issue
[ Upstream commit 49b1255603 ]

Currently, the driver queries the media port information, and
updates the port capability periodically. But it sets an error
mac->speed_type value, which stops update port capability.

Fixes: 88d10bd6f7 ("net: hns3: add support for multiple media type")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:44 +02:00
Jian Shen 5bc88c9338 net: hns3: enable broadcast promisc mode when initializing VF
[ Upstream commit 2d5066fc17 ]

For revision 0x20, the broadcast promisc is enabled by firmware,
it's unnecessary to enable it when initializing VF.

For revision 0x21, it's necessary to enable broadcast promisc mode
when initializing or re-initializing VF, otherwise, it will be
unable to send and receive promisc packets.

Fixes: f01f5559ca ("net: hns3: don't allow vf to enable promisc mode")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:44 +02:00
Jiri Olsa 0d61dc83f0 tools: bpftool: Fix json dump crash on powerpc
[ Upstream commit aa52bcbe0e ]

Michael reported crash with by bpf program in json mode on powerpc:

  # bpftool prog -p dump jited id 14
  [{
        "name": "0xd00000000a9aa760",
        "insns": [{
                "pc": "0x0",
                "operation": "nop",
                "operands": [null
                ]
            },{
                "pc": "0x4",
                "operation": "nop",
                "operands": [null
                ]
            },{
                "pc": "0x8",
                "operation": "mflr",
  Segmentation fault (core dumped)

The code is assuming char pointers in format, which is not always
true at least for powerpc. Fixing this by dumping the whole string
into buffer based on its format.

Please note that libopcodes code does not check return values from
fprintf callback, but as per Jakub suggestion returning -1 on allocation
failure so we do the best effort to propagate the error.

Fixes: 107f041212 ("tools: bpftool: add JSON output for `bpftool prog dump jited *` command")
Reported-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:44 +02:00
Wen Yang 5a156f038c ASoC: audio-graph-card: fix use-after-free in graph_for_each_link
[ Upstream commit 1bcc1fd64e ]

After calling of_node_put() on the codec_ep and codec_port variables,
they are still being used, which may result in use-after-free.
We fix this issue by calling of_node_put() after the last usage.

Fixes: fce9b90c1a ("ASoC: audio-graph-card: cleanup DAI link loop method - step2")
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: alsa-devel@alsa-project.org
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/1562229530-8121-1-git-send-email-wen.yang99@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:44 +02:00
Jean-Philippe Brucker 0417b0fda7 iommu/arm-smmu-v3: Invalidate ATC when detaching a device
[ Upstream commit 8dd8f005bd ]

We make the invalid assumption in arm_smmu_detach_dev() that the ATC is
clear after calling pci_disable_ats(). For one thing, only enabling the
PCIe ATS capability constitutes an implicit invalidation event, so the
comment was wrong. More importantly, the ATS capability isn't necessarily
disabled by pci_disable_ats() in a PF, if the associated VFs have ATS
enabled. Explicitly invalidate all ATC entries in arm_smmu_detach_dev().
The endpoint cannot form new ATC entries because STE.EATS is clear.

Fixes: 9ce27afc08 ("iommu/arm-smmu-v3: Add support for PCI ATS")
Reported-by: Manoj Kumar <Manoj.Kumar3@arm.com>
Reported-by: Robin Murphy <Robin.Murphy@arm.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:44 +02:00
Geert Uytterhoeven 72911828bb gpiolib: Fix references to gpiod_[gs]et_*value_cansleep() variants
[ Upstream commit 3285170f28 ]

Commit 372e722ea4 ("gpiolib: use descriptors internally") renamed
the functions to use a "gpiod" prefix, and commit 79a9becda8
("gpiolib: export descriptor-based GPIO interface") introduced the "raw"
variants, but both changes forgot to update the comments.

Readd a similar reference to gpiod_set_value(), which was accidentally
removed by commit 1e77fc8211 ("gpio: Add missing open drain/source
handling to gpiod_set_value_cansleep()").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20190701142738.25219-1-geert+renesas@glider.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:44 +02:00
Cong Wang bf26551d73 bonding: validate ip header before check IPPROTO_IGMP
[ Upstream commit 9d1bc24b52 ]

bond_xmit_roundrobin() checks for IGMP packets but it parses
the IP header even before checking skb->protocol.

We should validate the IP header with pskb_may_pull() before
using iph->protocol.

Reported-and-tested-by: syzbot+e5be16aa39ad6e755391@syzkaller.appspotmail.com
Fixes: a2fd940f4c ("bonding: fix broken multicast with round-robin mode")
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:43 +02:00
Jiri Benc 6ee610d804 selftests: bpf: fix inlines in test_lwt_seg6local
[ Upstream commit 11aca65ec4 ]

Selftests are reporting this failure in test_lwt_seg6local.sh:

+ ip netns exec ns2 ip -6 route add fb00::6 encap bpf in obj test_lwt_seg6local.o sec encap_srh dev veth2
Error fetching program/map!
Failed to parse eBPF program: Operation not permitted

The problem is __attribute__((always_inline)) alone is not enough to prevent
clang from inserting those functions in .text. In that case, .text is not
marked as relocateable.

See the output of objdump -h test_lwt_seg6local.o:

Idx Name          Size      VMA               LMA               File off  Algn
  0 .text         00003530  0000000000000000  0000000000000000  00000040  2**3
                  CONTENTS, ALLOC, LOAD, READONLY, CODE

This causes the iproute bpf loader to fail in bpf_fetch_prog_sec:
bpf_has_call_data returns true but bpf_fetch_prog_relo fails as there's no
relocateable .text section in the file.

To fix this, convert to 'static __always_inline'.

v2: Use 'static __always_inline' instead of 'static inline
    __attribute__((always_inline))'

Fixes: c99a84eac0 ("selftests/bpf: test for seg6local End.BPF action")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:43 +02:00
Leo Yan dab7df3072 bpf, libbpf, smatch: Fix potential NULL pointer dereference
[ Upstream commit 33bae185f7 ]

Based on the following report from Smatch, fix the potential NULL
pointer dereference check:

  tools/lib/bpf/libbpf.c:3493
  bpf_prog_load_xattr() warn: variable dereferenced before check 'attr'
  (see line 3483)

  3479 int bpf_prog_load_xattr(const struct bpf_prog_load_attr *attr,
  3480                         struct bpf_object **pobj, int *prog_fd)
  3481 {
  3482         struct bpf_object_open_attr open_attr = {
  3483                 .file           = attr->file,
  3484                 .prog_type      = attr->prog_type,
                                         ^^^^^^
  3485         };

At the head of function, it directly access 'attr' without checking
if it's NULL pointer. This patch moves the values assignment after
validating 'attr' and 'attr->file'.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:43 +02:00
Andrii Nakryiko ba38126fbd libbpf: fix GCC8 warning for strncpy
[ Upstream commit cdfc7f888c ]

GCC8 started emitting warning about using strncpy with number of bytes
exactly equal destination size, which is generally unsafe, as can lead
to non-zero terminated string being copied. Use IFNAMSIZ - 1 as number
of bytes to ensure name is always zero-terminated.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Cc: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:43 +02:00
David Howells c352c3e84b rxrpc: Fix oops in tracepoint
[ Upstream commit 99f0eae653 ]

If the rxrpc_eproto tracepoint is enabled, an oops will be cause by the
trace line that rxrpc_extract_header() tries to emit when a protocol error
occurs (typically because the packet is short) because the call argument is
NULL.

Fix this by using ?: to assume 0 as the debug_id if call is NULL.

This can then be induced by:

	echo -e '\0\0\0\0\0\0\0\0' | ncat -4u --send-only <addr> 20001

where addr has the following program running on it:

	#include <stdio.h>
	#include <stdlib.h>
	#include <string.h>
	#include <unistd.h>
	#include <sys/socket.h>
	#include <arpa/inet.h>
	#include <linux/rxrpc.h>
	int main(void)
	{
		struct sockaddr_rxrpc srx;
		int fd;
		memset(&srx, 0, sizeof(srx));
		srx.srx_family			= AF_RXRPC;
		srx.srx_service			= 0;
		srx.transport_type		= AF_INET;
		srx.transport_len		= sizeof(srx.transport.sin);
		srx.transport.sin.sin_family	= AF_INET;
		srx.transport.sin.sin_port	= htons(0x4e21);
		fd = socket(AF_RXRPC, SOCK_DGRAM, AF_INET6);
		bind(fd, (struct sockaddr *)&srx, sizeof(srx));
		sleep(20);
		return 0;
	}

It results in the following oops.

	BUG: kernel NULL pointer dereference, address: 0000000000000340
	#PF: supervisor read access in kernel mode
	#PF: error_code(0x0000) - not-present page
	...
	RIP: 0010:trace_event_raw_event_rxrpc_rx_eproto+0x47/0xac
	...
	Call Trace:
	 <IRQ>
	 rxrpc_extract_header+0x86/0x171
	 ? rcu_read_lock_sched_held+0x5d/0x63
	 ? rxrpc_new_skb+0xd4/0x109
	 rxrpc_input_packet+0xef/0x14fc
	 ? rxrpc_input_data+0x986/0x986
	 udp_queue_rcv_one_skb+0xbf/0x3d0
	 udp_unicast_rcv_skb.isra.8+0x64/0x71
	 ip_protocol_deliver_rcu+0xe4/0x1b4
	 ip_local_deliver+0xf0/0x154
	 __netif_receive_skb_one_core+0x50/0x6c
	 netif_receive_skb_internal+0x26b/0x2e9
	 napi_gro_receive+0xf8/0x1da
	 rtl8169_poll+0x303/0x4c4
	 net_rx_action+0x10e/0x333
	 __do_softirq+0x1a5/0x38f
	 irq_exit+0x54/0xc4
	 do_IRQ+0xda/0xf8
	 common_interrupt+0xf/0xf
	 </IRQ>
	 ...
	 ? cpuidle_enter_state+0x23c/0x34d
	 cpuidle_enter+0x2a/0x36
	 do_idle+0x163/0x1ea
	 cpu_startup_entry+0x1d/0x1f
	 start_secondary+0x157/0x172
	 secondary_startup_64+0xa4/0xb0

Fixes: a25e21f0bc ("rxrpc, afs: Use debug_ids rather than pointers in traces")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:43 +02:00
Phong Tran 1c1fd391d4 net: usb: asix: init MAC address buffers
[ Upstream commit 78226f6eaa ]

This is for fixing bug KMSAN: uninit-value in ax88772_bind

Tested by
https://groups.google.com/d/msg/syzkaller-bugs/aFQurGotng4/eB_HlNhhCwAJ

Reported-by: syzbot+8a3fc6674bbc3978ed4e@syzkaller.appspotmail.com

syzbot found the following crash on:

HEAD commit:    f75e4cfe kmsan: use kmsan_handle_urb() in urb.c
git tree:       kmsan
console output: https://syzkaller.appspot.com/x/log.txt?x=136d720ea00000
kernel config:
https://syzkaller.appspot.com/x/.config?x=602468164ccdc30a
dashboard link:
https://syzkaller.appspot.com/bug?extid=8a3fc6674bbc3978ed4e
compiler:       clang version 9.0.0 (/home/glider/llvm/clang
06d00afa61eef8f7f501ebdb4e8612ea43ec2d78)
syz repro:
https://syzkaller.appspot.com/x/repro.syz?x=12788316a00000
C reproducer:   https://syzkaller.appspot.com/x/repro.c?x=120359aaa00000

==================================================================
BUG: KMSAN: uninit-value in is_valid_ether_addr
include/linux/etherdevice.h:200 [inline]
BUG: KMSAN: uninit-value in asix_set_netdev_dev_addr
drivers/net/usb/asix_devices.c:73 [inline]
BUG: KMSAN: uninit-value in ax88772_bind+0x93d/0x11e0
drivers/net/usb/asix_devices.c:724
CPU: 0 PID: 3348 Comm: kworker/0:2 Not tainted 5.1.0+ #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0x191/0x1f0 lib/dump_stack.c:113
  kmsan_report+0x130/0x2a0 mm/kmsan/kmsan.c:622
  __msan_warning+0x75/0xe0 mm/kmsan/kmsan_instr.c:310
  is_valid_ether_addr include/linux/etherdevice.h:200 [inline]
  asix_set_netdev_dev_addr drivers/net/usb/asix_devices.c:73 [inline]
  ax88772_bind+0x93d/0x11e0 drivers/net/usb/asix_devices.c:724
  usbnet_probe+0x10f5/0x3940 drivers/net/usb/usbnet.c:1728
  usb_probe_interface+0xd66/0x1320 drivers/usb/core/driver.c:361
  really_probe+0xdae/0x1d80 drivers/base/dd.c:513
  driver_probe_device+0x1b3/0x4f0 drivers/base/dd.c:671
  __device_attach_driver+0x5b8/0x790 drivers/base/dd.c:778
  bus_for_each_drv+0x28e/0x3b0 drivers/base/bus.c:454
  __device_attach+0x454/0x730 drivers/base/dd.c:844
  device_initial_probe+0x4a/0x60 drivers/base/dd.c:891
  bus_probe_device+0x137/0x390 drivers/base/bus.c:514
  device_add+0x288d/0x30e0 drivers/base/core.c:2106
  usb_set_configuration+0x30dc/0x3750 drivers/usb/core/message.c:2027
  generic_probe+0xe7/0x280 drivers/usb/core/generic.c:210
  usb_probe_device+0x14c/0x200 drivers/usb/core/driver.c:266
  really_probe+0xdae/0x1d80 drivers/base/dd.c:513
  driver_probe_device+0x1b3/0x4f0 drivers/base/dd.c:671
  __device_attach_driver+0x5b8/0x790 drivers/base/dd.c:778
  bus_for_each_drv+0x28e/0x3b0 drivers/base/bus.c:454
  __device_attach+0x454/0x730 drivers/base/dd.c:844
  device_initial_probe+0x4a/0x60 drivers/base/dd.c:891
  bus_probe_device+0x137/0x390 drivers/base/bus.c:514
  device_add+0x288d/0x30e0 drivers/base/core.c:2106
  usb_new_device+0x23e5/0x2ff0 drivers/usb/core/hub.c:2534
  hub_port_connect drivers/usb/core/hub.c:5089 [inline]
  hub_port_connect_change drivers/usb/core/hub.c:5204 [inline]
  port_event drivers/usb/core/hub.c:5350 [inline]
  hub_event+0x48d1/0x7290 drivers/usb/core/hub.c:5432
  process_one_work+0x1572/0x1f00 kernel/workqueue.c:2269
  process_scheduled_works kernel/workqueue.c:2331 [inline]
  worker_thread+0x189c/0x2460 kernel/workqueue.c:2417
  kthread+0x4b5/0x4f0 kernel/kthread.c:254
  ret_from_fork+0x35/0x40 arch/x86/entry/entry_64.S:355

Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:43 +02:00
Guilherme G. Piccoli 846027be71 bnx2x: Prevent ptp_task to be rescheduled indefinitely
[ Upstream commit 3c91f25c2f ]

Currently bnx2x ptp worker tries to read a register with timestamp
information in case of TX packet timestamping and in case it fails,
the routine reschedules itself indefinitely. This was reported as a
kworker always at 100% of CPU usage, which was narrowed down to be
bnx2x ptp_task.

By following the ioctl handler, we could narrow down the problem to
an NTP tool (chrony) requesting HW timestamping from bnx2x NIC with
RX filter zeroed; this isn't reproducible for example with ptp4l
(from linuxptp) since this tool requests a supported RX filter.
It seems NIC FW timestamp mechanism cannot work well with
RX_FILTER_NONE - driver's PTP filter init routine skips a register
write to the adapter if there's not a supported filter request.

This patch addresses the problem of bnx2x ptp thread's everlasting
reschedule by retrying the register read 10 times; between the read
attempts the thread sleeps for an increasing amount of time starting
in 1ms to give FW some time to perform the timestamping. If it still
fails after all retries, we bail out in order to prevent an unbound
resource consumption from bnx2x.

The patch also adds an ethtool statistic for accounting the skipped
TX timestamp packets and it reduces the priority of timestamping
error messages to prevent log flooding. The code was tested using
both linuxptp and chrony.

Reported-and-tested-by: Przemyslaw Hausman <przemyslaw.hausman@canonical.com>
Suggested-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@canonical.com>
Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:43 +02:00
Taehee Yoo 7429e6e2fb vxlan: do not destroy fdb if register_netdevice() is failed
[ Upstream commit 7c31e54aee ]

__vxlan_dev_create() destroys FDB using specific pointer which indicates
a fdb when error occurs.
But that pointer should not be used when register_netdevice() fails because
register_netdevice() internally destroys fdb when error occurs.

This patch makes vxlan_fdb_create() to do not link fdb entry to vxlan dev
internally.
Instead, a new function vxlan_fdb_insert() is added to link fdb to vxlan
dev.

vxlan_fdb_insert() is called after calling register_netdevice().
This routine can avoid situation that ->ndo_uninit() destroys fdb entry
in error path of register_netdevice().
Hence, error path of __vxlan_dev_create() routine can have an opportunity
to destroy default fdb entry by hand.

Test command
    ip link add bonding_masters type vxlan id 0 group 239.1.1.1 \
	    dev enp0s9 dstport 4789

Splat looks like:
[  213.392816] kasan: GPF could be caused by NULL-ptr deref or user memory access
[  213.401257] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[  213.402178] CPU: 0 PID: 1414 Comm: ip Not tainted 5.2.0-rc5+ #256
[  213.402178] RIP: 0010:vxlan_fdb_destroy+0x120/0x220 [vxlan]
[  213.402178] Code: df 48 8b 2b 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 06 01 00 00 4c 8b 63 08 48 b8 00 00 00 00 00 fc d
[  213.402178] RSP: 0018:ffff88810cb9f0a0 EFLAGS: 00010202
[  213.402178] RAX: dffffc0000000000 RBX: ffff888101d4a8c8 RCX: 0000000000000000
[  213.402178] RDX: 1bd5a00000000040 RSI: ffff888101d4a8c8 RDI: ffff888101d4a8d0
[  213.402178] RBP: 0000000000000000 R08: fffffbfff22b72d9 R09: 0000000000000000
[  213.402178] R10: 00000000ffffffef R11: 0000000000000000 R12: dead000000000200
[  213.402178] R13: ffff88810cb9f1f8 R14: ffff88810efccda0 R15: ffff88810efccda0
[  213.402178] FS:  00007f7f6621a0c0(0000) GS:ffff88811b000000(0000) knlGS:0000000000000000
[  213.402178] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  213.402178] CR2: 000055746f0807d0 CR3: 00000001123e0000 CR4: 00000000001006f0
[  213.402178] Call Trace:
[  213.402178]  __vxlan_dev_create+0x3a9/0x7d0 [vxlan]
[  213.402178]  ? vxlan_changelink+0x740/0x740 [vxlan]
[  213.402178]  ? rcu_read_unlock+0x60/0x60 [vxlan]
[  213.402178]  ? __kasan_kmalloc.constprop.3+0xa0/0xd0
[  213.402178]  vxlan_newlink+0x8d/0xc0 [vxlan]
[  213.402178]  ? __vxlan_dev_create+0x7d0/0x7d0 [vxlan]
[  213.554119]  ? __netlink_ns_capable+0xc3/0xf0
[  213.554119]  __rtnl_newlink+0xb75/0x1180
[  213.554119]  ? rtnl_link_unregister+0x230/0x230
[ ... ]

Fixes: 0241b83673 ("vxlan: fix default fdb entry netlink notify ordering during netdev create")
Suggested-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:43 +02:00
Andi Kleen 7c51ec4612 perf stat: Fix group lookup for metric group
[ Upstream commit 2f87f33f42 ]

The metric group code tries to find a group it added earlier in the
evlist. Fix the lookup to handle groups with partially overlaps
correctly. When a sub string match fails and we reset the match, we have
to compare the first element again.

I also renamed the find_evsel function to find_evsel_group to make its
purpose clearer.

With the earlier changes this fixes:

Before:

  % perf stat -M UPI,IPC sleep 1
  ...
         1,032,922      uops_retired.retire_slots #      1.1 UPI
         1,896,096      inst_retired.any
         1,896,096      inst_retired.any
         1,177,254      cpu_clk_unhalted.thread

After:

  % perf stat -M UPI,IPC sleep 1
  ...
        1,013,193      uops_retired.retire_slots #      1.1 UPI
           932,033      inst_retired.any
           932,033      inst_retired.any          #      0.9 IPC
         1,091,245      cpu_clk_unhalted.thread

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Fixes: b18f3e3650 ("perf stat: Support JSON metrics in perf stat")
Link: http://lkml.kernel.org/r/20190624193711.35241-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:43 +02:00
Andi Kleen b610b5f080 perf stat: Don't merge events in the same PMU
[ Upstream commit 6c5f4e5cb3 ]

Event merging is mainly to collapse similar events in lots of different
duplicated PMUs.

It can break metric displaying. It's possible for two metrics to have
the same event, and when the two events happen in a row the second
wouldn't be displayed.  This would also not show the second metric.

To avoid this don't merge events in the same PMU. This makes sense, if
we have multiple events in the same PMU there is likely some reason for
it (e.g. using multiple groups) and we better not merge them.

While in theory it would be possible to construct metrics that have
events with the same name in different PMU no current metrics have this
problem.

This is the fix for perf stat -M UPI,IPC (needs also another bug fix to
completely work)

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Fixes: 430daf2dc7 ("perf stat: Collapse identically named events")
Link: http://lkml.kernel.org/r/20190624193711.35241-3-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:42 +02:00
Andi Kleen 97ceeb9d1a perf stat: Fix metrics with --no-merge
[ Upstream commit e3a9427323 ]

Since Fixes: 8c5421c016 ("perf pmu: Display pmu name when printing
unmerged events in stat") using --no-merge adds the PMU name to the
evsel name.

This breaks the metric value lookup because the parser doesn't know
about this.

Remove the extra postfixes for the metric evaluation.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Agustin Vega-Frias <agustinv@codeaurora.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Fixes: 8c5421c016 ("perf pmu: Display pmu name when printing unmerged events in stat")
Link: http://lkml.kernel.org/r/20190624193711.35241-5-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:42 +02:00
Andi Kleen 50d549cefa perf stat: Make metric event lookup more robust
[ Upstream commit 145c407c80 ]

After setting up metric groups through the event parser, the metricgroup
code looks them up again in the event list.

Make sure we only look up events that haven't been used by some other
metric. The data structures currently cannot handle more than one metric
per event. This avoids problems with multiple events partially
overlapping.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: http://lkml.kernel.org/r/20190624193711.35241-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:42 +02:00
Rander Wang 54f43ea4c2 ALSA: hda: Fix a headphone detection issue when using SOF
[ Upstream commit 7c2b3629d0 ]

To save power, the hda hdmi driver in ASoC invokes snd_hdac_ext_bus_link_put
to disable CORB/RIRB buffers DMA if there is no user of bus and invokes
snd_hdac_ext_bus_link_get to set up CORB/RIRB buffers when it is used.
Unsolicited responses is disabled in snd_hdac_bus_stop_cmd_io called by
snd_hdac_ext_bus_link_put , but it is not enabled in snd_hdac_bus_init_cmd_io
called by snd_hdac_ext_bus_link_get. So for put-get sequence, Unsolicited
responses is disabled and headphone can't be detected by hda codecs.

Now unsolicited responses is only enabled in snd_hdac_bus_reset_link
which resets controller. The function is only called for setup of
controller. This patch enables Unsolicited responses after RIRB is
initialized in snd_hdac_bus_init_cmd_io which works together with
snd_hdac_bus_reset_link to set up controller.

Tested legacy hda driver and SOF driver on intel whiskeylake.

Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:42 +02:00
Michael Chan 74ba703a25 bnxt_en: Cap the returned MSIX vectors to the RDMA driver.
[ Upstream commit 1dbc59fa4b ]

In an earlier commit to improve NQ reservations on 57500 chips, we
set the resv_irqs on the 57500 VFs to the fixed value assigned by
the PF regardless of how many are actually used.  The current
code assumes that resv_irqs minus the ones used by the network driver
must be the ones for the RDMA driver.  This is no longer true and
we may return more MSIX vectors than requested, causing inconsistency.
Fix it by capping the value.

Fixes: 01989c6b69 ("bnxt_en: Improve NQ reservations.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:42 +02:00
Michael Chan 25f8800189 bnxt_en: Fix statistics context reservation logic for RDMA driver.
[ Upstream commit d77b1ad8e8 ]

The current logic assumes that the RDMA driver uses one statistics
context adjacent to the ones used by the network driver.  This
assumption is not true and the statistics context used by the
RDMA driver is tied to its MSIX base vector.  This wrong assumption
can cause RDMA driver failure after changing ethtool rings on the
network side.  Fix the statistics reservation logic accordingly.

Fixes: 780baad44f ("bnxt_en: Reserve 1 stat_ctx for RDMA driver.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:42 +02:00
Michael Chan 9935cc5df1 bnxt_en: Disable bus master during PCI shutdown and driver unload.
[ Upstream commit c20dc142dd ]

Some chips with older firmware can continue to perform DMA read from
context memory even after the memory has been freed.  In the PCI shutdown
method, we need to call pci_disable_device() to shutdown DMA to prevent
this DMA before we put the device into D3hot.  DMA memory request in
D3hot state will generate PCI fatal error.  Similarly, in the driver
remove method, the context memory should only be freed after DMA has
been shutdown for correctness.

Fixes: 98f04cf0f1 ("bnxt_en: Check context memory requirements from firmware.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:42 +02:00
Shahar S Matityahu 6ea320766c iwlwifi: dbg: fix debug monitor stop and restart delays
[ Upstream commit fc838c775f ]

The driver should delay only in recording stop flow between writing to
DBGC_IN_SAMPLE register and DBGC_OUT_CTRL register. Any other delay is
not needed.

Change the following:
1. Remove any unnecessary delays in the flow
2. Increase the delay in the stop recording flow since 100 micro is
   not enough
3. Use usleep_range instead of delay since the driver is allowed to
   sleep in this flow.

Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Fixes: 5cfe79c8d9 ("iwlwifi: fw: stop and start debugging using host command")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:41 +02:00
He Zhe fba9941e82 netfilter: Fix remainder of pseudo-header protocol 0
[ Upstream commit 5d1549847c ]

Since v5.1-rc1, some types of packets do not get unreachable reply with the
following iptables setting. Fox example,

$ iptables -A INPUT -p icmp --icmp-type 8 -j REJECT
$ ping 127.0.0.1 -c 1
PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data.
— 127.0.0.1 ping statistics —
1 packets transmitted, 0 received, 100% packet loss, time 0ms

We should have got the following reply from command line, but we did not.
From 127.0.0.1 icmp_seq=1 Destination Port Unreachable

Yi Zhao reported it and narrowed it down to:
7fc3822536 ("netfilter: reject: skip csum verification for protocols that don't support it"),

This is because nf_ip_checksum still expects pseudo-header protocol type 0 for
packets that are of neither TCP or UDP, and thus ICMP packets are mistakenly
treated as TCP/UDP.

This patch corrects the conditions in nf_ip_checksum and all other places that
still call it with protocol 0.

Fixes: 7fc3822536 ("netfilter: reject: skip csum verification for protocols that don't support it")
Reported-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:41 +02:00
Baruch Siach 85965e2caf bpf: fix uapi bpf_prog_info fields alignment
[ Upstream commit 0472301a28 ]

Merge commit 1c8c5a9d38 ("Merge
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next") undid the
fix from commit 36f9814a49 ("bpf: fix uapi hole for 32 bit compat
applications") by taking the gpl_compatible 1-bit field definition from
commit b85fab0e67 ("bpf: Add gpl_compatible flag to struct
bpf_prog_info") as is. That breaks architectures with 16-bit alignment
like m68k. Add 31-bit pad after gpl_compatible to restore alignment of
following fields.

Thanks to Dmitry V. Levin his analysis of this bug history.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:41 +02:00
Andrei Otcheretianski 735e6867dd iwlwifi: mvm: Drop large non sta frames
[ Upstream commit ac70499ee9 ]

In some buggy scenarios we could possible attempt to transmit frames larger
than maximum MSDU size. Since our devices don't know how to handle this,
it may result in asserts, hangs etc.
This can happen, for example, when we receive a large multicast frame
and try to transmit it back to the air in AP mode.
Since in a legal scenario this should never happen, drop such frames and
warn about it.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:41 +02:00
Dann Frazier 2b4d50ae99 ixgbe: Avoid NULL pointer dereference with VF on non-IPsec hw
[ Upstream commit 9292406410 ]

An ipsec structure will not be allocated if the hardware does not support
offload. Fixes the following Oops:

[  191.045452] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[  191.054232] Mem abort info:
[  191.057014]   ESR = 0x96000004
[  191.060057]   Exception class = DABT (current EL), IL = 32 bits
[  191.065963]   SET = 0, FnV = 0
[  191.069004]   EA = 0, S1PTW = 0
[  191.072132] Data abort info:
[  191.074999]   ISV = 0, ISS = 0x00000004
[  191.078822]   CM = 0, WnR = 0
[  191.081780] user pgtable: 4k pages, 48-bit VAs, pgdp = 0000000043d9e467
[  191.088382] [0000000000000000] pgd=0000000000000000
[  191.093252] Internal error: Oops: 96000004 [#1] SMP
[  191.098119] Modules linked in: vhost_net vhost tap vfio_pci vfio_virqfd vfio_iommu_type1 vfio xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4 xt_tcpudp bridge stp llc ebtable_filter devlink ebtables ip6table_filter ip6_tables iptable_filter bpfilter ipmi_ssif nls_iso8859_1 input_leds joydev ipmi_si hns_roce_hw_v2 ipmi_devintf hns_roce ipmi_msghandler cppc_cpufreq sch_fq_codel ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 ses enclosure btrfs zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor hid_generic usbhid hid raid6_pq libcrc32c raid1 raid0 multipath linear ixgbevf hibmc_drm ttm
[  191.168607]  drm_kms_helper aes_ce_blk aes_ce_cipher syscopyarea crct10dif_ce sysfillrect ghash_ce qla2xxx sysimgblt sha2_ce sha256_arm64 hisi_sas_v3_hw fb_sys_fops sha1_ce uas nvme_fc mpt3sas ixgbe drm hisi_sas_main nvme_fabrics usb_storage hclge scsi_transport_fc ahci libsas hnae3 raid_class libahci xfrm_algo scsi_transport_sas mdio aes_neon_bs aes_neon_blk crypto_simd cryptd aes_arm64
[  191.202952] CPU: 94 PID: 0 Comm: swapper/94 Not tainted 4.19.0-rc1+ #11
[  191.209553] Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0 - V1.20.01 04/26/2019
[  191.218064] pstate: 20400089 (nzCv daIf +PAN -UAO)
[  191.222873] pc : ixgbe_ipsec_vf_clear+0x60/0xd0 [ixgbe]
[  191.228093] lr : ixgbe_msg_task+0x2d0/0x1088 [ixgbe]
[  191.233044] sp : ffff000009b3bcd0
[  191.236346] x29: ffff000009b3bcd0 x28: 0000000000000000
[  191.241647] x27: ffff000009628000 x26: 0000000000000000
[  191.246946] x25: ffff803f652d7600 x24: 0000000000000004
[  191.252246] x23: ffff803f6a718900 x22: 0000000000000000
[  191.257546] x21: 0000000000000000 x20: 0000000000000000
[  191.262845] x19: 0000000000000000 x18: 0000000000000000
[  191.268144] x17: 0000000000000000 x16: 0000000000000000
[  191.273443] x15: 0000000000000000 x14: 0000000100000026
[  191.278742] x13: 0000000100000025 x12: ffff8a5f7fbe0df0
[  191.284042] x11: 000000010000000b x10: 0000000000000040
[  191.289341] x9 : 0000000000001100 x8 : ffff803f6a824fd8
[  191.294640] x7 : ffff803f6a825098 x6 : 0000000000000001
[  191.299939] x5 : ffff000000f0ffc0 x4 : 0000000000000000
[  191.305238] x3 : ffff000028c00000 x2 : ffff803f652d7600
[  191.310538] x1 : 0000000000000000 x0 : ffff000000f205f0
[  191.315838] Process swapper/94 (pid: 0, stack limit = 0x00000000addfed5a)
[  191.322613] Call trace:
[  191.325055]  ixgbe_ipsec_vf_clear+0x60/0xd0 [ixgbe]
[  191.329927]  ixgbe_msg_task+0x2d0/0x1088 [ixgbe]
[  191.334536]  ixgbe_msix_other+0x274/0x330 [ixgbe]
[  191.339233]  __handle_irq_event_percpu+0x78/0x270
[  191.343924]  handle_irq_event_percpu+0x40/0x98
[  191.348355]  handle_irq_event+0x50/0xa8
[  191.352180]  handle_fasteoi_irq+0xbc/0x148
[  191.356263]  generic_handle_irq+0x34/0x50
[  191.360259]  __handle_domain_irq+0x68/0xc0
[  191.364343]  gic_handle_irq+0x84/0x180
[  191.368079]  el1_irq+0xe8/0x180
[  191.371208]  arch_cpu_idle+0x30/0x1a8
[  191.374860]  do_idle+0x1dc/0x2a0
[  191.378077]  cpu_startup_entry+0x2c/0x30
[  191.381988]  secondary_start_kernel+0x150/0x1e0
[  191.386506] Code: 6b15003f 54000320 f1404a9f 54000060 (79400260)

Fixes: eda0333ac2 ("ixgbe: add VF IPsec management")
Signed-off-by: Dann Frazier <dann.frazier@canonical.com>
Acked-by: Shannon Nelson <snelson@pensando.io>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:41 +02:00
Marek Vasut 62073ba5f4 net: ethernet: ti: cpsw: Assign OF node to slave devices
[ Upstream commit 337d1727a3 ]

Assign OF node to CPSW slave devices, otherwise it is not possible to
bind e.g. DSA switch to them. Without this patch, the DSA code tries
to find the ethernet device by OF match, but fails to do so because
the slave device has NULL OF node.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:41 +02:00
Yonglong Liu 270b7ad352 net: hns3: add Asym Pause support to fix autoneg problem
[ Upstream commit bc3781edce ]

Local device and link partner config auto-negotiation on both,
local device config pause frame use as: rx on/tx off,
link partner config pause frame use as: rx off/tx on.

We except the result is:
Local device:
Autonegotiate:  on
RX:             on
TX:             off
RX negotiated:  on
TX negotiated:  off

Link partner:
Autonegotiate:  on
RX:             off
TX:             on
RX negotiated:  off
TX negotiated:  on

But actually, the result of Local device and link partner is both:
Autonegotiate:  on
RX:             off
TX:             off
RX negotiated:  off
TX negotiated:  off

The root cause is that the supported flag is has only Pause,
reference to the function genphy_config_advert():
static int genphy_config_advert(struct phy_device *phydev)
{
	...
	linkmode_and(phydev->advertising, phydev->advertising,
		     phydev->supported);
	...
}
The pause frame use of link partner is rx off/tx on, so its
advertising only set the bit Asym_Pause, and the supported is
only set the bit Pause, so the result of linkmode_and(), is
rx off/tx off.

This patch adds Asym_Pause to the supported flag to fix it.

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:40 +02:00
Vedang Patel ee0725334e igb: clear out skb->tstamp after reading the txtime
[ Upstream commit 1e08511d5d ]

If a packet which is utilizing the launchtime feature (via SO_TXTIME socket
option) also requests the hardware transmit timestamp, the hardware
timestamp is not delivered to the userspace. This is because the value in
skb->tstamp is mistaken as the software timestamp.

Applications, like ptp4l, request a hardware timestamp by setting the
SOF_TIMESTAMPING_TX_HARDWARE socket option. Whenever a new timestamp is
detected by the driver (this work is done in igb_ptp_tx_work() which calls
igb_ptp_tx_hwtstamps() in igb_ptp.c[1]), it will queue the timestamp in the
ERR_QUEUE for the userspace to read. When the userspace is ready, it will
issue a recvmsg() call to collect this timestamp.  The problem is in this
recvmsg() call. If the skb->tstamp is not cleared out, it will be
interpreted as a software timestamp and the hardware tx timestamp will not
be successfully sent to the userspace. Look at skb_is_swtx_tstamp() and the
callee function __sock_recv_timestamp() in net/socket.c for more details.

Signed-off-by: Vedang Patel <vedang.patel@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:40 +02:00
Maxime Chevallier 5a75d06e67 net: mvpp2: prs: Don't override the sign bit in SRAM parser shift
[ Upstream commit 8ec3ede559 ]

The Header Parser allows identifying various fields in the packet
headers, used for various kind of filtering and classification
steps.

This is a re-entrant process, where the offset in the packet header
depends on the previous lookup results. This offset is represented in
the SRAM results of the TCAM, as a shift to be operated.

This shift can be negative in some cases, such as in IPv6 parsing.

This commit prevents overriding the sign bit when setting the shift
value, which could cause instabilities when parsing IPv6 flows.

Fixes: 3f518509de ("ethernet: Add new driver for Marvell Armada 375 network unit")
Suggested-by: Alan Winkowski <walan@marvell.com>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:40 +02:00
Wen Gong 0071ff72a4 ath10k: destroy sdio workqueue while remove sdio module
[ Upstream commit 3ed39f8e74 ]

The workqueue need to flush and destory while remove sdio module,
otherwise it will have thread which is not destory after remove
sdio modules.

Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00007-QCARMSWP-1.

Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:40 +02:00
Dundi Raviteja 0c2f0afee5 ath10k: Fix memory leak in qmi
[ Upstream commit c709df5883 ]

Currently the memory allocated for qmi handle is
not being freed during de-init which leads to memory leak.

Free the allocated qmi memory in qmi deinit
to avoid memory leak.

Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1

Fixes: fda6fee0001e ("ath10k: add QMI message handshake for wcn3990 client")
Signed-off-by: Dundi Raviteja <dundi@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:40 +02:00
Yunsheng Lin 6b3420b506 net: hns3: add some error checking in hclge_tm module
[ Upstream commit 04f25edb48 ]

When hdev->tx_sch_mode is HCLGE_FLAG_VNET_BASE_SCH_MODE, the
hclge_tm_schd_mode_vnet_base_cfg calls hclge_tm_pri_schd_mode_cfg
with vport->vport_id as pri_id, which is used as index for
hdev->tm_info.tc_info, it will cause out of bound access issue
if vport_id is equal to or larger than HNAE3_MAX_TC.

Also hardware only support maximum speed of HCLGE_ETHER_MAX_RATE.

So this patch adds two checks for above cases.

Fixes: 848440544b ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:40 +02:00
Yonglong Liu 4202fc2654 net: hns3: fix a -Wformat-nonliteral compile warning
[ Upstream commit 18d219b783 ]

When setting -Wformat=2, there is a compiler warning like this:

hclge_main.c:xxx:x: warning: format not a string literal and no
format arguments [-Wformat-nonliteral]
strs[i].desc);
^~~~

This patch adds missing format parameter "%s" to snprintf() to
fix it.

Fixes: 46a3df9f97 ("Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:40 +02:00
Coly Li 1ba0d730c0 bcache: fix potential deadlock in cached_def_free()
[ Upstream commit 7e865eba00 ]

When enable lockdep and reboot system with a writeback mode bcache
device, the following potential deadlock warning is reported by lockdep
engine.

[  101.536569][  T401] kworker/2:2/401 is trying to acquire lock:
[  101.538575][  T401] 00000000bbf6e6c7 ((wq_completion)bcache_writeback_wq){+.+.}, at: flush_workqueue+0x87/0x4c0
[  101.542054][  T401]
[  101.542054][  T401] but task is already holding lock:
[  101.544587][  T401] 00000000f5f305b3 ((work_completion)(&cl->work)#2){+.+.}, at: process_one_work+0x21e/0x640
[  101.548386][  T401]
[  101.548386][  T401] which lock already depends on the new lock.
[  101.548386][  T401]
[  101.551874][  T401]
[  101.551874][  T401] the existing dependency chain (in reverse order) is:
[  101.555000][  T401]
[  101.555000][  T401] -> #1 ((work_completion)(&cl->work)#2){+.+.}:
[  101.557860][  T401]        process_one_work+0x277/0x640
[  101.559661][  T401]        worker_thread+0x39/0x3f0
[  101.561340][  T401]        kthread+0x125/0x140
[  101.562963][  T401]        ret_from_fork+0x3a/0x50
[  101.564718][  T401]
[  101.564718][  T401] -> #0 ((wq_completion)bcache_writeback_wq){+.+.}:
[  101.567701][  T401]        lock_acquire+0xb4/0x1c0
[  101.569651][  T401]        flush_workqueue+0xae/0x4c0
[  101.571494][  T401]        drain_workqueue+0xa9/0x180
[  101.573234][  T401]        destroy_workqueue+0x17/0x250
[  101.575109][  T401]        cached_dev_free+0x44/0x120 [bcache]
[  101.577304][  T401]        process_one_work+0x2a4/0x640
[  101.579357][  T401]        worker_thread+0x39/0x3f0
[  101.581055][  T401]        kthread+0x125/0x140
[  101.582709][  T401]        ret_from_fork+0x3a/0x50
[  101.584592][  T401]
[  101.584592][  T401] other info that might help us debug this:
[  101.584592][  T401]
[  101.588355][  T401]  Possible unsafe locking scenario:
[  101.588355][  T401]
[  101.590974][  T401]        CPU0                    CPU1
[  101.592889][  T401]        ----                    ----
[  101.594743][  T401]   lock((work_completion)(&cl->work)#2);
[  101.596785][  T401]                                lock((wq_completion)bcache_writeback_wq);
[  101.600072][  T401]                                lock((work_completion)(&cl->work)#2);
[  101.602971][  T401]   lock((wq_completion)bcache_writeback_wq);
[  101.605255][  T401]
[  101.605255][  T401]  *** DEADLOCK ***
[  101.605255][  T401]
[  101.608310][  T401] 2 locks held by kworker/2:2/401:
[  101.610208][  T401]  #0: 00000000cf2c7d17 ((wq_completion)events){+.+.}, at: process_one_work+0x21e/0x640
[  101.613709][  T401]  #1: 00000000f5f305b3 ((work_completion)(&cl->work)#2){+.+.}, at: process_one_work+0x21e/0x640
[  101.617480][  T401]
[  101.617480][  T401] stack backtrace:
[  101.619539][  T401] CPU: 2 PID: 401 Comm: kworker/2:2 Tainted: G        W         5.2.0-rc4-lp151.20-default+ #1
[  101.623225][  T401] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/13/2018
[  101.627210][  T401] Workqueue: events cached_dev_free [bcache]
[  101.629239][  T401] Call Trace:
[  101.630360][  T401]  dump_stack+0x85/0xcb
[  101.631777][  T401]  print_circular_bug+0x19a/0x1f0
[  101.633485][  T401]  __lock_acquire+0x16cd/0x1850
[  101.635184][  T401]  ? __lock_acquire+0x6a8/0x1850
[  101.636863][  T401]  ? lock_acquire+0xb4/0x1c0
[  101.638421][  T401]  ? find_held_lock+0x34/0xa0
[  101.640015][  T401]  lock_acquire+0xb4/0x1c0
[  101.641513][  T401]  ? flush_workqueue+0x87/0x4c0
[  101.643248][  T401]  flush_workqueue+0xae/0x4c0
[  101.644832][  T401]  ? flush_workqueue+0x87/0x4c0
[  101.646476][  T401]  ? drain_workqueue+0xa9/0x180
[  101.648303][  T401]  drain_workqueue+0xa9/0x180
[  101.649867][  T401]  destroy_workqueue+0x17/0x250
[  101.651503][  T401]  cached_dev_free+0x44/0x120 [bcache]
[  101.653328][  T401]  process_one_work+0x2a4/0x640
[  101.655029][  T401]  worker_thread+0x39/0x3f0
[  101.656693][  T401]  ? process_one_work+0x640/0x640
[  101.658501][  T401]  kthread+0x125/0x140
[  101.660012][  T401]  ? kthread_create_worker_on_cpu+0x70/0x70
[  101.661985][  T401]  ret_from_fork+0x3a/0x50
[  101.691318][  T401] bcache: bcache_device_free() bcache0 stopped

Here is how the above potential deadlock may happen in reboot/shutdown
code path,
1) bcache_reboot() is called firstly in the reboot/shutdown code path,
   then in bcache_reboot(), bcache_device_stop() is called.
2) bcache_device_stop() sets BCACHE_DEV_CLOSING on d->falgs, then call
   closure_queue(&d->cl) to invoke cached_dev_flush(). And in turn
   cached_dev_flush() calls cached_dev_free() via closure_at()
3) In cached_dev_free(), after stopped writebach kthread
   dc->writeback_thread, the kwork dc->writeback_write_wq is stopping by
   destroy_workqueue().
4) Inside destroy_workqueue(), drain_workqueue() is called. Inside
   drain_workqueue(), flush_workqueue() is called. Then wq->lockdep_map
   is acquired by lock_map_acquire() in flush_workqueue(). After the
   lock acquired the rest part of flush_workqueue() just wait for the
   workqueue to complete.
5) Now we look back at writeback thread routine bch_writeback_thread(),
   in the main while-loop, write_dirty() is called via continue_at() in
   read_dirty_submit(), which is called via continue_at() in while-loop
   level called function read_dirty(). Inside write_dirty() it may be
   re-called on workqueeu dc->writeback_write_wq via continue_at().
   It means when the writeback kthread is stopped in cached_dev_free()
   there might be still one kworker queued on dc->writeback_write_wq
   to execute write_dirty() again.
6) Now this kworker is scheduled on dc->writeback_write_wq to run by
   process_one_work() (which is called by worker_thread()). Before
   calling the kwork routine, wq->lockdep_map is acquired.
7) But wq->lockdep_map is acquired already in step 4), so a A-A lock
   (lockdep terminology) scenario happens.

Indeed on multiple cores syatem, the above deadlock is very rare to
happen, just as the code comments in process_one_work() says,
2263     * AFAICT there is no possible deadlock scenario between the
2264     * flush_work() and complete() primitives (except for
	   single-threaded
2265     * workqueues), so hiding them isn't a problem.

But it is still good to fix such lockdep warning, even no one running
bcache on single core system.

The fix is simple. This patch solves the above potential deadlock by,
- Do not destroy workqueue dc->writeback_write_wq in cached_dev_free().
- Flush and destroy dc->writeback_write_wq in writebach kthread routine
  bch_writeback_thread(), where after quit the thread main while-loop
  and before cached_dev_put() is called.

By this fix, dc->writeback_write_wq will be stopped and destroy before
the writeback kthread stopped, so the chance for a A-A locking on
wq->lockdep_map is disappeared, such A-A deadlock won't happen
any more.

Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:40 +02:00
Coly Li 9af2708055 bcache: avoid a deadlock in bcache_reboot()
[ Upstream commit a59ff6ccc2 ]

It is quite frequently to observe deadlock in bcache_reboot() happens
and hang the system reboot process. The reason is, in bcache_reboot()
when calling bch_cache_set_stop() and bcache_device_stop() the mutex
bch_register_lock is held. But in the process to stop cache set and
bcache device, bch_register_lock will be acquired again. If this mutex
is held here, deadlock will happen inside the stopping process. The
aftermath of the deadlock is, whole system reboot gets hung.

The fix is to avoid holding bch_register_lock for the following loops
in bcache_reboot(),
       list_for_each_entry_safe(c, tc, &bch_cache_sets, list)
                bch_cache_set_stop(c);

        list_for_each_entry_safe(dc, tdc, &uncached_devices, list)
                bcache_device_stop(&dc->disk);

A module range variable 'bcache_is_reboot' is added, it sets to true
in bcache_reboot(). In register_bcache(), if bcache_is_reboot is checked
to be true, reject the registration by returning -EBUSY immediately.

Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:39 +02:00
Coly Li abcad34e02 bcache: check c->gc_thread by IS_ERR_OR_NULL in cache_set_flush()
[ Upstream commit b387e9b586 ]

When system memory is in heavy pressure, bch_gc_thread_start() from
run_cache_set() may fail due to out of memory. In such condition,
c->gc_thread is assigned to -ENOMEM, not NULL pointer. Then in following
failure code path bch_cache_set_error(), when cache_set_flush() gets
called, the code piece to stop c->gc_thread is broken,
         if (!IS_ERR_OR_NULL(c->gc_thread))
                 kthread_stop(c->gc_thread);

And KASAN catches such NULL pointer deference problem, with the warning
information:

[  561.207881] ==================================================================
[  561.207900] BUG: KASAN: null-ptr-deref in kthread_stop+0x3b/0x440
[  561.207904] Write of size 4 at addr 000000000000001c by task kworker/15:1/313

[  561.207913] CPU: 15 PID: 313 Comm: kworker/15:1 Tainted: G        W         5.0.0-vanilla+ #3
[  561.207916] Hardware name: Lenovo ThinkSystem SR650 -[7X05CTO1WW]-/-[7X05CTO1WW]-, BIOS -[IVE136T-2.10]- 03/22/2019
[  561.207935] Workqueue: events cache_set_flush [bcache]
[  561.207940] Call Trace:
[  561.207948]  dump_stack+0x9a/0xeb
[  561.207955]  ? kthread_stop+0x3b/0x440
[  561.207960]  ? kthread_stop+0x3b/0x440
[  561.207965]  kasan_report+0x176/0x192
[  561.207973]  ? kthread_stop+0x3b/0x440
[  561.207981]  kthread_stop+0x3b/0x440
[  561.207995]  cache_set_flush+0xd4/0x6d0 [bcache]
[  561.208008]  process_one_work+0x856/0x1620
[  561.208015]  ? find_held_lock+0x39/0x1d0
[  561.208028]  ? drain_workqueue+0x380/0x380
[  561.208048]  worker_thread+0x87/0xb80
[  561.208058]  ? __kthread_parkme+0xb6/0x180
[  561.208067]  ? process_one_work+0x1620/0x1620
[  561.208072]  kthread+0x326/0x3e0
[  561.208079]  ? kthread_create_worker_on_cpu+0xc0/0xc0
[  561.208090]  ret_from_fork+0x3a/0x50
[  561.208110] ==================================================================
[  561.208113] Disabling lock debugging due to kernel taint
[  561.208115] irq event stamp: 11800231
[  561.208126] hardirqs last  enabled at (11800231): [<ffffffff83008538>] do_syscall_64+0x18/0x410
[  561.208127] BUG: unable to handle kernel NULL pointer dereference at 000000000000001c
[  561.208129] #PF error: [WRITE]
[  561.312253] hardirqs last disabled at (11800230): [<ffffffff830052ff>] trace_hardirqs_off_thunk+0x1a/0x1c
[  561.312259] softirqs last  enabled at (11799832): [<ffffffff850005c7>] __do_softirq+0x5c7/0x8c3
[  561.405975] PGD 0 P4D 0
[  561.442494] softirqs last disabled at (11799821): [<ffffffff831add2c>] irq_exit+0x1ac/0x1e0
[  561.791359] Oops: 0002 [#1] SMP KASAN NOPTI
[  561.791362] CPU: 15 PID: 313 Comm: kworker/15:1 Tainted: G    B   W         5.0.0-vanilla+ #3
[  561.791363] Hardware name: Lenovo ThinkSystem SR650 -[7X05CTO1WW]-/-[7X05CTO1WW]-, BIOS -[IVE136T-2.10]- 03/22/2019
[  561.791371] Workqueue: events cache_set_flush [bcache]
[  561.791374] RIP: 0010:kthread_stop+0x3b/0x440
[  561.791376] Code: 00 00 65 8b 05 26 d5 e0 7c 89 c0 48 0f a3 05 ec aa df 02 0f 82 dc 02 00 00 4c 8d 63 20 be 04 00 00 00 4c 89 e7 e8 65 c5 53 00 <f0> ff 43 20 48 8d 7b 24 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48
[  561.791377] RSP: 0018:ffff88872fc8fd10 EFLAGS: 00010286
[  561.838895] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[  561.838916] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[  561.838934] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[  561.838948] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[  561.838966] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[  561.838979] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[  561.838996] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[  563.067028] RAX: 0000000000000000 RBX: fffffffffffffffc RCX: ffffffff832dd314
[  563.067030] RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000297
[  563.067032] RBP: ffff88872fc8fe88 R08: fffffbfff0b8213d R09: fffffbfff0b8213d
[  563.067034] R10: 0000000000000001 R11: fffffbfff0b8213c R12: 000000000000001c
[  563.408618] R13: ffff88dc61cc0f68 R14: ffff888102b94900 R15: ffff88dc61cc0f68
[  563.408620] FS:  0000000000000000(0000) GS:ffff888f7dc00000(0000) knlGS:0000000000000000
[  563.408622] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  563.408623] CR2: 000000000000001c CR3: 0000000f48a1a004 CR4: 00000000007606e0
[  563.408625] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  563.408627] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  563.904795] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[  563.915796] PKRU: 55555554
[  563.915797] Call Trace:
[  563.915807]  cache_set_flush+0xd4/0x6d0 [bcache]
[  563.915812]  process_one_work+0x856/0x1620
[  564.001226] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[  564.033563]  ? find_held_lock+0x39/0x1d0
[  564.033567]  ? drain_workqueue+0x380/0x380
[  564.033574]  worker_thread+0x87/0xb80
[  564.062823] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[  564.118042]  ? __kthread_parkme+0xb6/0x180
[  564.118046]  ? process_one_work+0x1620/0x1620
[  564.118048]  kthread+0x326/0x3e0
[  564.118050]  ? kthread_create_worker_on_cpu+0xc0/0xc0
[  564.167066] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[  564.252441]  ret_from_fork+0x3a/0x50
[  564.252447] Modules linked in: msr rpcrdma sunrpc rdma_ucm ib_iser ib_umad rdma_cm ib_ipoib i40iw configfs iw_cm ib_cm libiscsi scsi_transport_iscsi mlx4_ib ib_uverbs mlx4_en ib_core nls_iso8859_1 nls_cp437 vfat fat intel_rapl skx_edac x86_pkg_temp_thermal coretemp iTCO_wdt iTCO_vendor_support crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ses raid0 aesni_intel cdc_ether enclosure usbnet ipmi_ssif joydev aes_x86_64 i40e scsi_transport_sas mii bcache md_mod crypto_simd mei_me ioatdma crc64 ptp cryptd pcspkr i2c_i801 mlx4_core glue_helper pps_core mei lpc_ich dca wmi ipmi_si ipmi_devintf nd_pmem dax_pmem nd_btt ipmi_msghandler device_dax pcc_cpufreq button hid_generic usbhid mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect xhci_pci sysimgblt fb_sys_fops xhci_hcd ttm megaraid_sas drm usbcore nfit libnvdimm sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua efivarfs
[  564.299390] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[  564.348360] CR2: 000000000000001c
[  564.348362] ---[ end trace b7f0e5cc7b2103b0 ]---

Therefore, it is not enough to only check whether c->gc_thread is NULL,
we should use IS_ERR_OR_NULL() to check both NULL pointer and error
value.

This patch changes the above buggy code piece in this way,
         if (!IS_ERR_OR_NULL(c->gc_thread))
                 kthread_stop(c->gc_thread);

Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:39 +02:00
Coly Li c586e2a593 bcache: acquire bch_register_lock later in cached_dev_free()
[ Upstream commit 80265d8dfd ]

When enable lockdep engine, a lockdep warning can be observed when
reboot or shutdown system,

[ 3142.764557][    T1] bcache: bcache_reboot() Stopping all devices:
[ 3142.776265][ T2649]
[ 3142.777159][ T2649] ======================================================
[ 3142.780039][ T2649] WARNING: possible circular locking dependency detected
[ 3142.782869][ T2649] 5.2.0-rc4-lp151.20-default+ #1 Tainted: G        W
[ 3142.785684][ T2649] ------------------------------------------------------
[ 3142.788479][ T2649] kworker/3:67/2649 is trying to acquire lock:
[ 3142.790738][ T2649] 00000000aaf02291 ((wq_completion)bcache_writeback_wq){+.+.}, at: flush_workqueue+0x87/0x4c0
[ 3142.794678][ T2649]
[ 3142.794678][ T2649] but task is already holding lock:
[ 3142.797402][ T2649] 000000004fcf89c5 (&bch_register_lock){+.+.}, at: cached_dev_free+0x17/0x120 [bcache]
[ 3142.801462][ T2649]
[ 3142.801462][ T2649] which lock already depends on the new lock.
[ 3142.801462][ T2649]
[ 3142.805277][ T2649]
[ 3142.805277][ T2649] the existing dependency chain (in reverse order) is:
[ 3142.808902][ T2649]
[ 3142.808902][ T2649] -> #2 (&bch_register_lock){+.+.}:
[ 3142.812396][ T2649]        __mutex_lock+0x7a/0x9d0
[ 3142.814184][ T2649]        cached_dev_free+0x17/0x120 [bcache]
[ 3142.816415][ T2649]        process_one_work+0x2a4/0x640
[ 3142.818413][ T2649]        worker_thread+0x39/0x3f0
[ 3142.820276][ T2649]        kthread+0x125/0x140
[ 3142.822061][ T2649]        ret_from_fork+0x3a/0x50
[ 3142.823965][ T2649]
[ 3142.823965][ T2649] -> #1 ((work_completion)(&cl->work)#2){+.+.}:
[ 3142.827244][ T2649]        process_one_work+0x277/0x640
[ 3142.829160][ T2649]        worker_thread+0x39/0x3f0
[ 3142.830958][ T2649]        kthread+0x125/0x140
[ 3142.832674][ T2649]        ret_from_fork+0x3a/0x50
[ 3142.834915][ T2649]
[ 3142.834915][ T2649] -> #0 ((wq_completion)bcache_writeback_wq){+.+.}:
[ 3142.838121][ T2649]        lock_acquire+0xb4/0x1c0
[ 3142.840025][ T2649]        flush_workqueue+0xae/0x4c0
[ 3142.842035][ T2649]        drain_workqueue+0xa9/0x180
[ 3142.844042][ T2649]        destroy_workqueue+0x17/0x250
[ 3142.846142][ T2649]        cached_dev_free+0x52/0x120 [bcache]
[ 3142.848530][ T2649]        process_one_work+0x2a4/0x640
[ 3142.850663][ T2649]        worker_thread+0x39/0x3f0
[ 3142.852464][ T2649]        kthread+0x125/0x140
[ 3142.854106][ T2649]        ret_from_fork+0x3a/0x50
[ 3142.855880][ T2649]
[ 3142.855880][ T2649] other info that might help us debug this:
[ 3142.855880][ T2649]
[ 3142.859663][ T2649] Chain exists of:
[ 3142.859663][ T2649]   (wq_completion)bcache_writeback_wq --> (work_completion)(&cl->work)#2 --> &bch_register_lock
[ 3142.859663][ T2649]
[ 3142.865424][ T2649]  Possible unsafe locking scenario:
[ 3142.865424][ T2649]
[ 3142.868022][ T2649]        CPU0                    CPU1
[ 3142.869885][ T2649]        ----                    ----
[ 3142.871751][ T2649]   lock(&bch_register_lock);
[ 3142.873379][ T2649]                                lock((work_completion)(&cl->work)#2);
[ 3142.876399][ T2649]                                lock(&bch_register_lock);
[ 3142.879727][ T2649]   lock((wq_completion)bcache_writeback_wq);
[ 3142.882064][ T2649]
[ 3142.882064][ T2649]  *** DEADLOCK ***
[ 3142.882064][ T2649]
[ 3142.885060][ T2649] 3 locks held by kworker/3:67/2649:
[ 3142.887245][ T2649]  #0: 00000000e774cdd0 ((wq_completion)events){+.+.}, at: process_one_work+0x21e/0x640
[ 3142.890815][ T2649]  #1: 00000000f7df89da ((work_completion)(&cl->work)#2){+.+.}, at: process_one_work+0x21e/0x640
[ 3142.894884][ T2649]  #2: 000000004fcf89c5 (&bch_register_lock){+.+.}, at: cached_dev_free+0x17/0x120 [bcache]
[ 3142.898797][ T2649]
[ 3142.898797][ T2649] stack backtrace:
[ 3142.900961][ T2649] CPU: 3 PID: 2649 Comm: kworker/3:67 Tainted: G        W         5.2.0-rc4-lp151.20-default+ #1
[ 3142.904789][ T2649] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/13/2018
[ 3142.909168][ T2649] Workqueue: events cached_dev_free [bcache]
[ 3142.911422][ T2649] Call Trace:
[ 3142.912656][ T2649]  dump_stack+0x85/0xcb
[ 3142.914181][ T2649]  print_circular_bug+0x19a/0x1f0
[ 3142.916193][ T2649]  __lock_acquire+0x16cd/0x1850
[ 3142.917936][ T2649]  ? __lock_acquire+0x6a8/0x1850
[ 3142.919704][ T2649]  ? lock_acquire+0xb4/0x1c0
[ 3142.921335][ T2649]  ? find_held_lock+0x34/0xa0
[ 3142.923052][ T2649]  lock_acquire+0xb4/0x1c0
[ 3142.924635][ T2649]  ? flush_workqueue+0x87/0x4c0
[ 3142.926375][ T2649]  flush_workqueue+0xae/0x4c0
[ 3142.928047][ T2649]  ? flush_workqueue+0x87/0x4c0
[ 3142.929824][ T2649]  ? drain_workqueue+0xa9/0x180
[ 3142.931686][ T2649]  drain_workqueue+0xa9/0x180
[ 3142.933534][ T2649]  destroy_workqueue+0x17/0x250
[ 3142.935787][ T2649]  cached_dev_free+0x52/0x120 [bcache]
[ 3142.937795][ T2649]  process_one_work+0x2a4/0x640
[ 3142.939803][ T2649]  worker_thread+0x39/0x3f0
[ 3142.941487][ T2649]  ? process_one_work+0x640/0x640
[ 3142.943389][ T2649]  kthread+0x125/0x140
[ 3142.944894][ T2649]  ? kthread_create_worker_on_cpu+0x70/0x70
[ 3142.947744][ T2649]  ret_from_fork+0x3a/0x50
[ 3142.970358][ T2649] bcache: bcache_device_free() bcache0 stopped

Here is how the deadlock happens.
1) bcache_reboot() calls bcache_device_stop(), then inside
   bcache_device_stop() BCACHE_DEV_CLOSING bit is set on d->flags.
   Then closure_queue(&d->cl) is called to invoke cached_dev_flush().
2) In cached_dev_flush(), cached_dev_free() is called by continu_at().
3) In cached_dev_free(), when stopping the writeback kthread of the
   cached device by kthread_stop(), dc->writeback_thread will be waken
   up to quite the kthread while-loop, then cached_dev_put() is called
   in bch_writeback_thread().
4) Calling cached_dev_put() in writeback kthread may drop dc->count to
   0, then dc->detach kworker is scheduled, which is initialized as
   cached_dev_detach_finish().
5) Inside cached_dev_detach_finish(), the last line of code is to call
   closure_put(&dc->disk.cl), which drops the last reference counter of
   closrure dc->disk.cl, then the callback cached_dev_flush() gets
   called.
Now cached_dev_flush() is called for second time in the code path, the
first time is in step 2). And again bch_register_lock will be acquired
again, and a A-A lock (lockdep terminology) is happening.

The root cause of the above A-A lock is in cached_dev_free(), mutex
bch_register_lock is held before stopping writeback kthread and other
kworkers. Fortunately now we have variable 'bcache_is_reboot', which may
prevent device registration or unregistration during reboot/shutdown
time, so it is unncessary to hold bch_register_lock such early now.

This is how this patch fixes the reboot/shutdown time A-A lock issue:
After moving mutex_lock(&bch_register_lock) to a later location where
before atomic_read(&dc->running) in cached_dev_free(), such A-A lock
problem can be solved without any reboot time registration race.

Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:39 +02:00
Coly Li a8dc74d1af bcache: check CACHE_SET_IO_DISABLE bit in bch_journal()
[ Upstream commit 383ff2183a ]

When too many I/O errors happen on cache set and CACHE_SET_IO_DISABLE
bit is set, bch_journal() may continue to work because the journaling
bkey might be still in write set yet. The caller of bch_journal() may
believe the journal still work but the truth is in-memory journal write
set won't be written into cache device any more. This behavior may
introduce potential inconsistent metadata status.

This patch checks CACHE_SET_IO_DISABLE bit at the head of bch_journal(),
if the bit is set, bch_journal() returns NULL immediately to notice
caller to know journal does not work.

Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:39 +02:00
Coly Li 51e5050bf9 bcache: check CACHE_SET_IO_DISABLE in allocator code
[ Upstream commit e775339e1a ]

If CACHE_SET_IO_DISABLE of a cache set flag is set by too many I/O
errors, currently allocator routines can still continue allocate
space which may introduce inconsistent metadata state.

This patch checkes CACHE_SET_IO_DISABLE bit in following allocator
routines,
- bch_bucket_alloc()
- __bch_bucket_alloc_set()
Once CACHE_SET_IO_DISABLE is set on cache set, the allocator routines
may reject allocation request earlier to avoid potential inconsistent
metadata.

Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:39 +02:00
Coly Li c067bf154c bcache: fix return value error in bch_journal_read()
[ Upstream commit 0ae49cb7aa ]

When everything is OK in bch_journal_read(), finally the return value
is returned by,
	return ret;
which assumes ret will be 0 here. This assumption is wrong when all
journal buckets as are full and filled with valid journal entries. In
such cache the last location referencess read_bucket() sets 'ret' to
1, which means new jset added into jset list. The jset list is list
'journal' in caller run_cache_set().

Return 1 to run_cache_set() means something wrong and the cache set
won't start, but indeed everything is OK.

This patch changes the line at end of bch_journal_read() to directly
return 0 since everything if verything is good. Then a bogus error
is fixed.

Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:39 +02:00
Maxim Mikityanskiy 577753b998 net/mlx5e: Attach/detach XDP program safely
[ Upstream commit e18953240d ]

When an XDP program is set, a full reopen of all channels happens in two
cases:

1. When there was no program set, and a new one is being set.

2. When there was a program set, but it's being unset.

The full reopen is necessary, because the channel parameters may change
if XDP is enabled or disabled. However, it's performed in an unsafe way:
if the new channels fail to open, the old ones are already closed, and
the interface goes down. Use the safe way to switch channels instead.
The same way is already used for other configuration changes.

Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:39 +02:00
Eiichi Tsukata 3a774a136e EDAC: Fix global-out-of-bounds write when setting edac_mc_poll_msec
[ Upstream commit d8655e7630 ]

Commit 9da21b1509 ("EDAC: Poll timeout cannot be zero, p2") assumes
edac_mc_poll_msec to be unsigned long, but the type of the variable still
remained as int. Setting edac_mc_poll_msec can trigger out-of-bounds
write.

Reproducer:

  # echo 1001 > /sys/module/edac_core/parameters/edac_mc_poll_msec

KASAN report:

  BUG: KASAN: global-out-of-bounds in edac_set_poll_msec+0x140/0x150
  Write of size 8 at addr ffffffffb91b2d00 by task bash/1996

  CPU: 1 PID: 1996 Comm: bash Not tainted 5.2.0-rc6+ #23
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014
  Call Trace:
   dump_stack+0xca/0x13e
   print_address_description.cold+0x5/0x246
   __kasan_report.cold+0x75/0x9a
   ? edac_set_poll_msec+0x140/0x150
   kasan_report+0xe/0x20
   edac_set_poll_msec+0x140/0x150
   ? dimmdev_location_show+0x30/0x30
   ? vfs_lock_file+0xe0/0xe0
   ? _raw_spin_lock+0x87/0xe0
   param_attr_store+0x1b5/0x310
   ? param_array_set+0x4f0/0x4f0
   module_attr_store+0x58/0x80
   ? module_attr_show+0x80/0x80
   sysfs_kf_write+0x13d/0x1a0
   kernfs_fop_write+0x2bc/0x460
   ? sysfs_kf_bin_read+0x270/0x270
   ? kernfs_notify+0x1f0/0x1f0
   __vfs_write+0x81/0x100
   vfs_write+0x1e1/0x560
   ksys_write+0x126/0x250
   ? __ia32_sys_read+0xb0/0xb0
   ? do_syscall_64+0x1f/0x390
   do_syscall_64+0xc1/0x390
   entry_SYSCALL_64_after_hwframe+0x49/0xbe
  RIP: 0033:0x7fa7caa5e970
  Code: 73 01 c3 48 8b 0d 28 d5 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 99 2d 2c 00 00 75 10 b8 01 00 00 00 04
  RSP: 002b:00007fff6acfdfe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
  RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007fa7caa5e970
  RDX: 0000000000000005 RSI: 0000000000e95c08 RDI: 0000000000000001
  RBP: 0000000000e95c08 R08: 00007fa7cad1e760 R09: 00007fa7cb36a700
  R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000005
  R13: 0000000000000001 R14: 00007fa7cad1d600 R15: 0000000000000005

  The buggy address belongs to the variable:
   edac_mc_poll_msec+0x0/0x40

  Memory state around the buggy address:
   ffffffffb91b2c00: 00 00 00 00 fa fa fa fa 00 00 00 00 fa fa fa fa
   ffffffffb91b2c80: 00 00 00 00 fa fa fa fa 00 00 00 00 fa fa fa fa
  >ffffffffb91b2d00: 04 fa fa fa fa fa fa fa 04 fa fa fa fa fa fa fa
                     ^
   ffffffffb91b2d80: 04 fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
   ffffffffb91b2e00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Fix it by changing the type of edac_mc_poll_msec to unsigned int.
The reason why this patch adopts unsigned int rather than unsigned long
is msecs_to_jiffies() assumes arg to be unsigned int. We can avoid
integer conversion bugs and unsigned int will be large enough for
edac_mc_poll_msec.

Reviewed-by: James Morse <james.morse@arm.com>
Fixes: 9da21b1509 ("EDAC: Poll timeout cannot be zero, p2")
Signed-off-by: Eiichi Tsukata <devel@etsukata.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:38 +02:00
Ahmad Masri 0ecba23bbc wil6210: drop old event after wmi_call timeout
[ Upstream commit 1a27600311 ]

This change fixes a rare race condition of handling WMI events after
wmi_call expires.

wmi_recv_cmd immediately handles an event when reply_buf is defined and
a wmi_call is waiting for the event.
However, in case the wmi_call has already timed-out, there will be no
waiting/running wmi_call and the event will be queued in WMI queue and
will be handled later in wmi_event_handle.
Meanwhile, a new similar wmi_call for the same command and event may
be issued. In this case, when handling the queued event we got WARN_ON
printed.

Fixing this case as a valid timeout and drop the unexpected event.

Signed-off-by: Ahmad Masri <amasri@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:38 +02:00
Zefir Kurtisi a1b5ed0728 ath9k: correctly handle short radar pulses
[ Upstream commit df5c415050 ]

In commit 3c0efb745a ("ath9k: discard undersized packets")
the lower bound of RX packets was set to 10 (min ACK size) to
filter those that would otherwise be treated as invalid at
mac80211.

Alas, short radar pulses are reported as PHY_ERROR frames
with length set to 3. Therefore their detection stopped
working after that commit.

NOTE: ath9k drivers built thereafter will not pass DFS
certification.

This extends the criteria for short packets to explicitly
handle PHY_ERROR frames.

Fixes: 3c0efb745a ("ath9k: discard undersized packets")
Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:38 +02:00
Arnd Bergmann b8aa9d2a9e crypto: asymmetric_keys - select CRYPTO_HASH where needed
[ Upstream commit 90acc0653d ]

Build testing with some core crypto options disabled revealed
a few modules that are missing CRYPTO_HASH:

crypto/asymmetric_keys/x509_public_key.o: In function `x509_get_sig_params':
x509_public_key.c:(.text+0x4c7): undefined reference to `crypto_alloc_shash'
x509_public_key.c:(.text+0x5e5): undefined reference to `crypto_shash_digest'
crypto/asymmetric_keys/pkcs7_verify.o: In function `pkcs7_digest.isra.0':
pkcs7_verify.c:(.text+0xab): undefined reference to `crypto_alloc_shash'
pkcs7_verify.c:(.text+0x1b2): undefined reference to `crypto_shash_digest'
pkcs7_verify.c:(.text+0x3c1): undefined reference to `crypto_shash_update'
pkcs7_verify.c:(.text+0x411): undefined reference to `crypto_shash_finup'

This normally doesn't show up in randconfig tests because there is
a large number of other options that select CRYPTO_HASH.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:38 +02:00
Arnd Bergmann 4c9801c861 crypto: serpent - mark __serpent_setkey_sbox noinline
[ Upstream commit 473971187d ]

The same bug that gcc hit in the past is apparently now showing
up with clang, which decides to inline __serpent_setkey_sbox:

crypto/serpent_generic.c:268:5: error: stack frame size of 2112 bytes in function '__serpent_setkey' [-Werror,-Wframe-larger-than=]

Marking it 'noinline' reduces the stack usage from 2112 bytes to
192 and 96 bytes, respectively, and seems to generate more
useful object code.

Fixes: c871c10e4e ("crypto: serpent - improve __serpent_setkey with UBSAN")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:38 +02:00
Mauro S. M. Rodrigues e5b1304989 ixgbe: Check DDM existence in transceiver before access
[ Upstream commit 655c914145 ]

Some transceivers may comply with SFF-8472 but not implement the Digital
Diagnostic Monitoring (DDM) interface described in it. The existence of
such area is specified by bit 6 of byte 92, set to 1 if implemented.

Currently, due to not checking this bit ixgbe fails trying to read SFP
module's eeprom with the follow message:

ethtool -m enP51p1s0f0
Cannot get Module EEPROM data: Input/output error

Because it fails to read the additional 256 bytes in which it was assumed
to exist the DDM data.

This issue was noticed using a Mellanox Passive DAC PN 01FT738. The eeprom
data was confirmed by Mellanox as correct and present in other Passive
DACs in from other manufacturers.

Signed-off-by: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:38 +02:00
Jianbo Liu fd4067966d net/mlx5: Get vport ACL namespace by vport index
[ Upstream commit f53297d678 ]

The ingress and egress ACL root namespaces are created per vport and
stored into arrays. However, the vport number is not the same as the
index. Passing the array index, instead of vport number, to get the
correct ingress and egress acl namespace.

Fixes: 9b93ab981e ("net/mlx5: Separate ingress/egress namespaces for each vport")
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:38 +02:00
Jian Shen af8e2b4872 net: hns3: restore the MAC autoneg state after reset
[ Upstream commit d736fc6c68 ]

When doing global reset, the MAC autoneg state of fibre
port is set to default, which may cause user configuration
lost. This patch fixes it by restore the MAC autoneg state
after reset.

Fixes: 22f48e24a2 ("net: hns3: add autoneg and change speed support for fibre port")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:37 +02:00
Waibel Georg 5319277968 gpio: Fix return value mismatch of function gpiod_get_from_of_node()
[ Upstream commit 025bf37725 ]

In case the requested gpio property is not found in the device tree, some
callers of gpiod_get_from_of_node() expect a return value of NULL, others
expect -ENOENT.
In particular devm_fwnode_get_index_gpiod_from_child() expects -ENOENT.
Currently it gets a NULL, which breaks the loop that tries all
gpio_suffixes. The result is that a gpio property is not found, even
though it is there.

This patch changes gpiod_get_from_of_node() to return -ENOENT instead
of NULL when the requested gpio property is not found in the device
tree. Additionally it modifies all calling functions to properly
evaluate the return value.

Another approach would be to leave the return value of
gpiod_get_from_of_node() as is and fix the bug in
devm_fwnode_get_index_gpiod_from_child(). Other callers would still need
to be reworked. The effort would be the same as with the chosen solution.

Signed-off-by: Georg Waibel <georg.waibel@sensor-technik.de>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:37 +02:00
Ferdinand Blomqvist cc1c99e8a2 rslib: Fix handling of of caller provided syndrome
[ Upstream commit ef4d6a8556 ]

Check if the syndrome provided by the caller is zero, and act
accordingly.

Signed-off-by: Ferdinand Blomqvist <ferdinand.blomqvist@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190620141039.9874-6-ferdinand.blomqvist@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:37 +02:00
Jiong Wang 57d50e607b bpf: fix BPF_ALU32 | BPF_ARSH on BE arches
[ Upstream commit 75672dda27 ]

Yauheni reported the following code do not work correctly on BE arches:

       ALU_ARSH_X:
               DST = (u64) (u32) ((*(s32 *) &DST) >> SRC);
               CONT;
       ALU_ARSH_K:
               DST = (u64) (u32) ((*(s32 *) &DST) >> IMM);
               CONT;

and are causing failure of test_verifier test 'arsh32 on imm 2' on BE
arches.

The code is taking address and interpreting memory directly, so is not
endianness neutral. We should instead perform standard C type casting on
the variable. A u64 to s32 conversion will drop the high 32-bit and reserve
the low 32-bit as signed integer, this is all we want.

Fixes: 2dc6b100f9 ("bpf: interpreter support BPF_ALU | BPF_ARSH")
Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:37 +02:00
Ferdinand Blomqvist 503b1de9c1 rslib: Fix decoding of shortened codes
[ Upstream commit 2034a42d17 ]

The decoding of shortenend codes is broken. It only works as expected if
there are no erasures.

When decoding with erasures, Lambda (the error and erasure locator
polynomial) is initialized from the given erasure positions. The pad
parameter is not accounted for by the initialisation code, and hence
Lambda is initialized from incorrect erasure positions.

The fix is to adjust the erasure positions by the supplied pad.

Signed-off-by: Ferdinand Blomqvist <ferdinand.blomqvist@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190620141039.9874-3-ferdinand.blomqvist@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:37 +02:00
Nathan Chancellor b02beb2e50 xsk: Properly terminate assignment in xskq_produce_flush_desc
[ Upstream commit f7019b7b0a ]

Clang warns:

In file included from net/xdp/xsk_queue.c:10:
net/xdp/xsk_queue.h:292:2: warning: expression result unused
[-Wunused-value]
        WRITE_ONCE(q->ring->producer, q->prod_tail);
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/compiler.h:284:6: note: expanded from macro 'WRITE_ONCE'
        __u.__val;                                      \
        ~~~ ^~~~~
1 warning generated.

The q->prod_tail assignment has a comma at the end, not a semi-colon.
Fix that so clang no longer warns and everything works as expected.

Fixes: c497176cb2 ("xsk: add Rx receive functions and poll support")
Link: https://github.com/ClangBuiltLinux/linux/issues/544
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:37 +02:00
Felix Kaechele 381dc73f82 netfilter: ctnetlink: Fix regression in conntrack entry deletion
[ Upstream commit e7600865db ]

Commit f8e6089820 ("netfilter: ctnetlink: Resolve conntrack
L3-protocol flush regression") introduced a regression in which deletion
of conntrack entries would fail because the L3 protocol information
is replaced by AF_UNSPEC. As a result the search for the entry to be
deleted would turn up empty due to the tuple used to perform the search
is now different from the tuple used to initially set up the entry.

For flushing the conntrack table we do however want to keep the option
for nfgenmsg->version to have a non-zero value to allow for newer
user-space tools to request treatment under the new behavior. With that
it is possible to independently flush tables for a defined L3 protocol.
This was introduced with the enhancements in in commit 59c08c69c2
("netfilter: ctnetlink: Support L3 protocol-filter on flush").

Older user-space tools will retain the behavior of flushing all tables
regardless of defined L3 protocol.

Fixes: f8e6089820 ("netfilter: ctnetlink: Resolve conntrack L3-protocol flush regression")
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Felix Kaechele <felix@kaechele.ca>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:36 +02:00
Marek Szyprowski 9a29060949 clocksource/drivers/exynos_mct: Increase priority over ARM arch timer
[ Upstream commit 6282edb72b ]

Exynos SoCs based on CA7/CA15 have 2 timer interfaces: custom Exynos MCT
(Multi Core Timer) and standard ARM Architected Timers.

There are use cases, where both timer interfaces are used simultanously.
One of such examples is using Exynos MCT for the main system timer and
ARM Architected Timers for the KVM and virtualized guests (KVM requires
arch timers).

Exynos Multi-Core Timer driver (exynos_mct) must be however started
before ARM Architected Timers (arch_timer), because they both share some
common hardware blocks (global system counter) and turning on MCT is
needed to get ARM Architected Timer working properly.

To ensure selecting Exynos MCT as the main system timer, increase MCT
timer rating. To ensure proper starting order of both timers during
suspend/resume cycle, increase MCT hotplug priority over ARM Archictected
Timers.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:36 +02:00
Dmitry Osipenko c21c81b620 clocksource/drivers/tegra: Restore base address before cleanup
[ Upstream commit fc9babc257 ]

We're adjusting the timer's base for each per-CPU timer to point to the
actual start of the timer since device-tree defines a compound registers
range that includes all of the timers. In this case the original base
need to be restore before calling iounmap to unmap the proper address.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:36 +02:00
Tejun Heo 848ae42e23 libata: don't request sense data on !ZAC ATA devices
[ Upstream commit ca156e006a ]

ZAC support added sense data requesting on error for both ZAC and ATA
devices. This seems to cause erratic error handling behaviors on some
SSDs where the device reports sense data availability and then
delivers the wrong content making EH take the wrong actions.  The
failure mode was sporadic on a LITE-ON ssd and couldn't be reliably
reproduced.

There is no value in requesting sense data from non-ZAC ATA devices
while there's a significant risk of introducing EH misbehaviors which
are difficult to reproduce and fix.  Let's do the sense data dancing
only for ZAC devices.

Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Masato Suzuki <masato.suzuki@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:36 +02:00
Dmitry Osipenko 8f7bce8f06 clocksource/drivers/tegra: Release all IRQ's on request_irq() error
[ Upstream commit 7a3916706e ]

Release all requested IRQ's on the request error to properly clean up
allocated resources.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:36 +02:00
Paolo Valente 265c3b864d block, bfq: fix rq_in_driver check in bfq_update_inject_limit
[ Upstream commit db599f9ed9 ]

One of the cases where the parameters for injection may be updated is
when there are no more in-flight I/O requests. The number of in-flight
requests is stored in the field bfqd->rq_in_driver of the descriptor
bfqd of the device. So, the controlled condition is
bfqd->rq_in_driver == 0.

Unfortunately, this is wrong because, the instruction that checks this
condition is in the code path that handles the completion of a
request, and, in particular, the instruction is executed before
bfqd->rq_in_driver is decremented in such a code path.

This commit fixes this issue by just replacing 0 with 1 in the
comparison.

Reported-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Tested-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:36 +02:00
Amadeusz Sławiński fee45bc534 ASoC: Intel: hdac_hdmi: Set ops to NULL on remove
[ Upstream commit 0f6ff78540 ]

When we unload Skylake driver we may end up calling
hdac_component_master_unbind(), it uses acomp->audio_ops, which we set
in hdmi_codec_probe(), so we need to set it to NULL in hdmi_codec_remove(),
otherwise we will dereference no longer existing pointer.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:35 +02:00
Kyle Meyer 280aa2675c perf tools: Increase MAX_NR_CPUS and MAX_CACHES
[ Upstream commit 9f94c7f947 ]

Attempting to profile 1024 or more CPUs with perf causes two errors:

  perf record -a
  [ perf record: Woken up X times to write data ]
  way too many cpu caches..
  [ perf record: Captured and wrote X MB perf.data (X samples) ]

  perf report -C 1024
  Error: failed to set  cpu bitmap
  Requested CPU 1024 too large. Consider raising MAX_NR_CPUS

  Increasing MAX_NR_CPUS from 1024 to 2048 and redefining MAX_CACHES as
  MAX_NR_CPUS * 4 returns normal functionality to perf:

  perf record -a
  [ perf record: Woken up X times to write data ]
  [ perf record: Captured and wrote X MB perf.data (X samples) ]

  perf report -C 1024
  ...

Signed-off-by: Kyle Meyer <kyle.meyer@hpe.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190620193630.154025-1-meyerk@stormcage.eag.rdlabs.hpecorp.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:35 +02:00
Amadeusz Sławiński 4b018480e3 ALSA: hdac: Fix codec name after machine driver is unloaded and reloaded
[ Upstream commit 8a5b0177a7 ]

Currently on each driver reload internal counter is being increased. It
causes failure to enumerate driver devices, as they have hardcoded:
.codec_name = "ehdaudio0D2",
As there is currently no devices with multiple hda codecs and there is
currently no established way to reliably differentiate, between them,
always assign bus->idx = 0;

This fixes a problem when we unload and reload machine driver idx gets
incremented, so .codec_name would've needed to be set to "ehdaudio1D2"
after first reload and so on.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:35 +02:00
Miaoqing Pan 6c280573a3 ath10k: fix PCIE device wake up failed
[ Upstream commit 011d4111c8 ]

Observed PCIE device wake up failed after ~120 iterations of
soft-reboot test. The error message is
"ath10k_pci 0000:01:00.0: failed to wake up device : -110"

The call trace as below:
ath10k_pci_probe -> ath10k_pci_force_wake -> ath10k_pci_wake_wait ->
ath10k_pci_is_awake

Once trigger the device to wake up, we will continuously check the RTC
state until it returns RTC_STATE_V_ON or timeout.

But for QCA99x0 chips, we use wrong value for RTC_STATE_V_ON.
Occasionally, we get 0x7 on the fist read, we thought as a failure
case, but actually is the right value, also verified with the spec.
So fix the issue by changing RTC_STATE_V_ON from 0x5 to 0x7, passed
~2000 iterations.

Tested HW: QCA9984

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:35 +02:00
Miaoqing Pan 76d2350d04 ath10k: fix fw crash by moving chip reset after napi disabled
[ Upstream commit 08d80e4cd2 ]

On SMP platform, when continuously running wifi up/down, the napi
poll can be scheduled during chip reset, which will call
ath10k_pci_has_fw_crashed() to check the fw status. But in the reset
period, the value from FW_INDICATOR_ADDRESS register will return
0xdeadbeef, which also be treated as fw crash. Fix the issue by
moving chip reset after napi disabled.

ath10k_pci 0000:01:00.0: firmware crashed! (guid 73b30611-5b1e-4bdd-90b4-64c81eb947b6)
ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp max-sta 512 raw 0 hwcrypto 1
ath10k_pci 0000:01:00.0: failed to get memcpy hi address for firmware address 4: -16
ath10k_pci 0000:01:00.0: failed to read firmware dump area: -16
ath10k_pci 0000:01:00.0: Copy Engine register dump:
ath10k_pci 0000:01:00.0: [00]: 0x0004a000   0   0   0   0
ath10k_pci 0000:01:00.0: [01]: 0x0004a400   0   0   0   0
ath10k_pci 0000:01:00.0: [02]: 0x0004a800   0   0   0   0
ath10k_pci 0000:01:00.0: [03]: 0x0004ac00   0   0   0   0
ath10k_pci 0000:01:00.0: [04]: 0x0004b000   0   0   0   0
ath10k_pci 0000:01:00.0: [05]: 0x0004b400   0   0   0   0
ath10k_pci 0000:01:00.0: [06]: 0x0004b800   0   0   0   0
ath10k_pci 0000:01:00.0: [07]: 0x0004bc00   1   0   1   0
ath10k_pci 0000:01:00.0: [08]: 0x0004c000   0   0   0   0
ath10k_pci 0000:01:00.0: [09]: 0x0004c400   0   0   0   0
ath10k_pci 0000:01:00.0: [10]: 0x0004c800   0   0   0   0
ath10k_pci 0000:01:00.0: [11]: 0x0004cc00   0   0   0   0

Tested HW: QCA9984,QCA9887,WCN3990

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:35 +02:00
Claire Chang 187d75b567 ath10k: add missing error handling
[ Upstream commit 4b553f3ca4 ]

In function ath10k_sdio_mbox_rx_alloc() [sdio.c],
ath10k_sdio_mbox_alloc_rx_pkt() is called without handling the error cases.
This will make the driver think the allocation for skb is successful and
try to access the skb. If we enable failslab, system will easily crash with
NULL pointer dereferencing.

Call trace of CONFIG_FAILSLAB:
ath10k_sdio_irq_handler+0x570/0xa88 [ath10k_sdio]
process_sdio_pending_irqs+0x4c/0x174
sdio_run_irqs+0x3c/0x64
sdio_irq_work+0x1c/0x28

Fixes: d96db25d20 ("ath10k: add initial SDIO support")
Signed-off-by: Claire Chang <tientzu@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:35 +02:00
Lorenzo Bianconi 64493e8d0f mt76: mt7615: do not process rx packets if the device is not initialized
[ Upstream commit 2dcb79cde6 ]

Fix following crash that occurs when the driver is processing rx packets
while the device is not initialized yet

$ rmmod mt7615e
[   67.210261] mt7615e 0000:01:00.0: Message -239 (seq 2) timeout
$ modprobe mt7615e
[   72.406937] bus=0x1, slot = 0x0, irq=0x16
[   72.436590] CPU 0 Unable to handle kernel paging request at virtual address 00000004, epc == 8eec4240, ra == 8eec41e0
[   72.450291] mt7615e 0000:01:00.0: Firmware is not ready for download
[   72.457724] Oops[#1]:
[   72.470494] mt7615e: probe of 0000:01:00.0 failed with error -5
[   72.474829] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.114 #0
[   72.498702] task: 805769e0 task.stack: 80564000
[   72.507709] $ 0   : 00000000 00000001 00000000 00000001
[   72.518106] $ 4   : 8f704dbc 00000000 00000000 8f7046c0
[   72.528500] $ 8   : 00000024 8045e98c 81210008 11000000
[   72.538895] $12   : 8fc09f60 00000008 00000019 00000033
[   72.549289] $16   : 8f704d80 e00000ff 8f0c7800 3c182406
[   72.559684] $20   : 00000006 8ee615a0 4e000108 00000000
[   72.570078] $24   : 0000004c 8000cf94
[   72.580474] $28   : 80564000 8fc09e38 00000001 8eec41e0
[   72.590869] Hi    : 00000001
[   72.596582] Lo    : 00000000
[   72.602319] epc   : 8eec4240 mt7615_mac_fill_rx+0xac/0x494 [mt7615e]
[   72.614953] ra    : 8eec41e0 mt7615_mac_fill_rx+0x4c/0x494 [mt7615e]
[   72.627580] Status: 11008403 KERNEL EXL IE
[   72.635899] Cause : 40800008 (ExcCode 02)
[   72.643860] BadVA : 00000004
[   72.649573] PrId  : 0001992f (MIPS 1004Kc)
[   72.657704] Modules linked in: mt7615e pppoe ppp_async pppox ppp_generic nf_conntrack_ipv6 mt76x2e mt76x2_common mt76x02_lib mt7603e mt76 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_mu]
[   72.792717] Process swapper/0 (pid: 0, threadinfo=80564000, task=805769e0, tls=00000000)
[   72.808799] Stack : 8f0c7800 00000800 8f0c7800 8032b874 00000000 40000000 8f704d80 8ee615a0
[   72.825428]         8dc88010 00000001 8ee615e0 8eec09b0 8dc88010 8032b914 8f3aee80 80567d20
[   72.842055]         00000000 8ee615e0 40000000 8f0c7800 00000108 8eec9944 00000000 00000000
[   72.858682]         80508f10 80510000 00000001 80567d20 8ee615a0 00000000 00000000 8ee61c00
[   72.875308]         8ee61c40 00000040 80610000 80580000 00000000 8ee615dc 8ee61a68 00000001
[   72.891936]         ...
[   72.896793] Call Trace:
[   72.901649] [<8eec4240>] mt7615_mac_fill_rx+0xac/0x494 [mt7615e]
[   72.913602] [<8eec09b0>] mt7615_queue_rx_skb+0xe4/0x12c [mt7615e]
[   72.925734] [<8eec9944>] mt76_dma_cleanup+0x390/0x42c [mt76]
[   72.936988] Code: ae020018  8ea20004  24030001 <94420004> a602002a  8ea20004  90420000  14430003  a2020034
[   72.956390]
[   72.959676] ---[ end trace f176967739edb19f ]---

Fixes: 04b8e65922 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:35 +02:00
Julian Anastasov eb92aca132 ipvs: fix tinfo memory leak in start_sync_thread
[ Upstream commit 5db7c8b9f9 ]

syzkaller reports for memory leak in start_sync_thread [1]

As Eric points out, kthread may start and stop before the
threadfn function is called, so there is no chance the
data (tinfo in our case) to be released in thread.

Fix this by releasing tinfo in the controlling code instead.

[1]
BUG: memory leak
unreferenced object 0xffff8881206bf700 (size 32):
 comm "syz-executor761", pid 7268, jiffies 4294943441 (age 20.470s)
 hex dump (first 32 bytes):
   00 40 7c 09 81 88 ff ff 80 45 b8 21 81 88 ff ff  .@|......E.!....
   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
 backtrace:
   [<0000000057619e23>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline]
   [<0000000057619e23>] slab_post_alloc_hook mm/slab.h:439 [inline]
   [<0000000057619e23>] slab_alloc mm/slab.c:3326 [inline]
   [<0000000057619e23>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553
   [<0000000086ce5479>] kmalloc include/linux/slab.h:547 [inline]
   [<0000000086ce5479>] start_sync_thread+0x5d2/0xe10 net/netfilter/ipvs/ip_vs_sync.c:1862
   [<000000001a9229cc>] do_ip_vs_set_ctl+0x4c5/0x780 net/netfilter/ipvs/ip_vs_ctl.c:2402
   [<00000000ece457c8>] nf_sockopt net/netfilter/nf_sockopt.c:106 [inline]
   [<00000000ece457c8>] nf_setsockopt+0x4c/0x80 net/netfilter/nf_sockopt.c:115
   [<00000000942f62d4>] ip_setsockopt net/ipv4/ip_sockglue.c:1258 [inline]
   [<00000000942f62d4>] ip_setsockopt+0x9b/0xb0 net/ipv4/ip_sockglue.c:1238
   [<00000000a56a8ffd>] udp_setsockopt+0x4e/0x90 net/ipv4/udp.c:2616
   [<00000000fa895401>] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3130
   [<0000000095eef4cf>] __sys_setsockopt+0x98/0x120 net/socket.c:2078
   [<000000009747cf88>] __do_sys_setsockopt net/socket.c:2089 [inline]
   [<000000009747cf88>] __se_sys_setsockopt net/socket.c:2086 [inline]
   [<000000009747cf88>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2086
   [<00000000ded8ba80>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:301
   [<00000000893b4ac8>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reported-by: syzbot+7e2e50c8adfccd2e5041@syzkaller.appspotmail.com
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Fixes: 998e7a7680 ("ipvs: Use kthread_run() instead of doing a double-fork via kernel_thread()")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:34 +02:00
Lorenzo Bianconi 0f5046af45 mt7601u: fix possible memory leak when the device is disconnected
[ Upstream commit 23377c200b ]

When the device is disconnected while passing traffic it is possible
to receive out of order urbs causing a memory leak since the skb linked
to the current tx urb is not removed. Fix the issue deallocating the skb
cleaning up the tx ring. Moreover this patch fixes the following kernel
warning

[   57.480771] usb 1-1: USB disconnect, device number 2
[   57.483451] ------------[ cut here ]------------
[   57.483462] TX urb mismatch
[   57.483481] WARNING: CPU: 1 PID: 32 at drivers/net/wireless/mediatek/mt7601u/dma.c:245 mt7601u_complete_tx+0x165/00
[   57.483483] Modules linked in:
[   57.483496] CPU: 1 PID: 32 Comm: kworker/1:1 Not tainted 5.2.0-rc1+ #72
[   57.483498] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.12.0-2.fc30 04/01/2014
[   57.483502] Workqueue: usb_hub_wq hub_event
[   57.483507] RIP: 0010:mt7601u_complete_tx+0x165/0x1e0
[   57.483510] Code: 8b b5 10 04 00 00 8b 8d 14 04 00 00 eb 8b 80 3d b1 cb e1 00 00 75 9e 48 c7 c7 a4 ea 05 82 c6 05 f
[   57.483513] RSP: 0000:ffffc900000a0d28 EFLAGS: 00010092
[   57.483516] RAX: 000000000000000f RBX: ffff88802c0a62c0 RCX: ffffc900000a0c2c
[   57.483518] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff810a8371
[   57.483520] RBP: ffff88803ced6858 R08: 0000000000000000 R09: 0000000000000001
[   57.483540] R10: 0000000000000002 R11: 0000000000000000 R12: 0000000000000046
[   57.483542] R13: ffff88802c0a6c88 R14: ffff88803baab540 R15: ffff88803a0cc078
[   57.483548] FS:  0000000000000000(0000) GS:ffff88803eb00000(0000) knlGS:0000000000000000
[   57.483550] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   57.483552] CR2: 000055e7f6780100 CR3: 0000000028c86000 CR4: 00000000000006a0
[   57.483554] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   57.483556] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   57.483559] Call Trace:
[   57.483561]  <IRQ>
[   57.483565]  __usb_hcd_giveback_urb+0x77/0xe0
[   57.483570]  xhci_giveback_urb_in_irq.isra.0+0x8b/0x140
[   57.483574]  handle_cmd_completion+0xf5b/0x12c0
[   57.483577]  xhci_irq+0x1f6/0x1810
[   57.483581]  ? lockdep_hardirqs_on+0x9e/0x180
[   57.483584]  ? _raw_spin_unlock_irq+0x24/0x30
[   57.483588]  __handle_irq_event_percpu+0x3a/0x260
[   57.483592]  handle_irq_event_percpu+0x1c/0x60
[   57.483595]  handle_irq_event+0x2f/0x4c
[   57.483599]  handle_edge_irq+0x7e/0x1a0
[   57.483603]  handle_irq+0x17/0x20
[   57.483607]  do_IRQ+0x54/0x110
[   57.483610]  common_interrupt+0xf/0xf
[   57.483612]  </IRQ>

Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:34 +02:00
Masahiro Yamada df324bab42 x86/build: Add 'set -e' to mkcapflags.sh to delete broken capflags.c
[ Upstream commit bc53d3d777 ]

Without 'set -e', shell scripts continue running even after any
error occurs. The missed 'set -e' is a typical bug in shell scripting.

For example, when a disk space shortage occurs while this script is
running, it actually ends up with generating a truncated capflags.c.

Yet, mkcapflags.sh continues running and exits with 0. So, the build
system assumes it has succeeded.

It will not be re-generated in the next invocation of Make since its
timestamp is newer than that of any of the source files.

Add 'set -e' so that any error in this script is caught and propagated
to the build system.

Since 9c2af1c737 ("kbuild: add .DELETE_ON_ERROR special target"),
make automatically deletes the target on any failure. So, the broken
capflags.c will be deleted automatically.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/20190625072622.17679-1-yamada.masahiro@socionext.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:34 +02:00
Lorenzo Bianconi 01f6a9de90 mt7601u: do not schedule rx_tasklet when the device has been disconnected
[ Upstream commit 4079e8ccab ]

Do not schedule rx_tasklet when the usb dongle is disconnected.
Moreover do not grub rx_lock in mt7601u_kill_rx since usb_poison_urb
can run concurrently with urb completion and we can unlink urbs from rx
ring in any order.
This patch fixes the common kernel warning reported when
the device is removed.

[   24.921354] usb 3-14: USB disconnect, device number 7
[   24.921593] ------------[ cut here ]------------
[   24.921594] RX urb mismatch
[   24.921675] WARNING: CPU: 4 PID: 163 at drivers/net/wireless/mediatek/mt7601u/dma.c:200 mt7601u_complete_rx+0xcb/0xd0 [mt7601u]
[   24.921769] CPU: 4 PID: 163 Comm: kworker/4:2 Tainted: G           OE     4.19.31-041931-generic #201903231635
[   24.921770] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z97 Extreme4, BIOS P1.30 05/23/2014
[   24.921782] Workqueue: usb_hub_wq hub_event
[   24.921797] RIP: 0010:mt7601u_complete_rx+0xcb/0xd0 [mt7601u]
[   24.921800] RSP: 0018:ffff9bd9cfd03d08 EFLAGS: 00010086
[   24.921802] RAX: 0000000000000000 RBX: ffff9bd9bf043540 RCX: 0000000000000006
[   24.921803] RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff9bd9cfd16420
[   24.921804] RBP: ffff9bd9cfd03d28 R08: 0000000000000002 R09: 00000000000003a8
[   24.921805] R10: 0000002f485fca34 R11: 0000000000000000 R12: ffff9bd9bf043c1c
[   24.921806] R13: ffff9bd9c62fa3c0 R14: 0000000000000082 R15: 0000000000000000
[   24.921807] FS:  0000000000000000(0000) GS:ffff9bd9cfd00000(0000) knlGS:0000000000000000
[   24.921808] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   24.921808] CR2: 00007fb2648b0000 CR3: 0000000142c0a004 CR4: 00000000001606e0
[   24.921809] Call Trace:
[   24.921812]  <IRQ>
[   24.921819]  __usb_hcd_giveback_urb+0x8b/0x140
[   24.921821]  usb_hcd_giveback_urb+0xca/0xe0
[   24.921828]  xhci_giveback_urb_in_irq.isra.42+0x82/0xf0
[   24.921834]  handle_cmd_completion+0xe02/0x10d0
[   24.921837]  xhci_irq+0x274/0x4a0
[   24.921838]  xhci_msi_irq+0x11/0x20
[   24.921851]  __handle_irq_event_percpu+0x44/0x190
[   24.921856]  handle_irq_event_percpu+0x32/0x80
[   24.921861]  handle_irq_event+0x3b/0x5a
[   24.921867]  handle_edge_irq+0x80/0x190
[   24.921874]  handle_irq+0x20/0x30
[   24.921889]  do_IRQ+0x4e/0xe0
[   24.921891]  common_interrupt+0xf/0xf
[   24.921892]  </IRQ>
[   24.921900] RIP: 0010:usb_hcd_flush_endpoint+0x78/0x180
[   24.921354] usb 3-14: USB disconnect, device number 7

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:34 +02:00
Ping-Ke Shih 229632d74a rtlwifi: rtl8192cu: fix error handle when usb probe failed
[ Upstream commit 6c0ed66f1a ]

rtl_usb_probe() must do error handle rtl_deinit_core() only if
rtl_init_core() is done, otherwise goto error_out2.

| usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
| rtl_usb: reg 0xf0, usbctrl_vendorreq TimeOut! status:0xffffffb9 value=0x0
| rtl8192cu: Chip version 0x10
| rtl_usb: reg 0xa, usbctrl_vendorreq TimeOut! status:0xffffffb9 value=0x0
| rtl_usb: Too few input end points found
| INFO: trying to register non-static key.
| the code is fine but needs lockdep annotation.
| turning off the locking correctness validator.
| CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.1.0-rc4-319354-g9a33b36 #3
| Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
| Google 01/01/2011
| Workqueue: usb_hub_wq hub_event
| Call Trace:
|   __dump_stack lib/dump_stack.c:77 [inline]
|   dump_stack+0xe8/0x16e lib/dump_stack.c:113
|   assign_lock_key kernel/locking/lockdep.c:786 [inline]
|   register_lock_class+0x11b8/0x1250 kernel/locking/lockdep.c:1095
|   __lock_acquire+0xfb/0x37c0 kernel/locking/lockdep.c:3582
|   lock_acquire+0x10d/0x2f0 kernel/locking/lockdep.c:4211
|   __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
|   _raw_spin_lock_irqsave+0x44/0x60 kernel/locking/spinlock.c:152
|   rtl_c2hcmd_launcher+0xd1/0x390
| drivers/net/wireless/realtek/rtlwifi/base.c:2344
|   rtl_deinit_core+0x25/0x2d0 drivers/net/wireless/realtek/rtlwifi/base.c:574
|   rtl_usb_probe.cold+0x861/0xa70
| drivers/net/wireless/realtek/rtlwifi/usb.c:1093
|   usb_probe_interface+0x31d/0x820 drivers/usb/core/driver.c:361
|   really_probe+0x2da/0xb10 drivers/base/dd.c:509
|   driver_probe_device+0x21d/0x350 drivers/base/dd.c:671
|   __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778
|   bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454
|   __device_attach+0x223/0x3a0 drivers/base/dd.c:844
|   bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514
|   device_add+0xad2/0x16e0 drivers/base/core.c:2106
|   usb_set_configuration+0xdf7/0x1740 drivers/usb/core/message.c:2021
|   generic_probe+0xa2/0xda drivers/usb/core/generic.c:210
|   usb_probe_device+0xc0/0x150 drivers/usb/core/driver.c:266
|   really_probe+0x2da/0xb10 drivers/base/dd.c:509
|   driver_probe_device+0x21d/0x350 drivers/base/dd.c:671
|   __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778
|   bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454
|   __device_attach+0x223/0x3a0 drivers/base/dd.c:844
|   bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514
|   device_add+0xad2/0x16e0 drivers/base/core.c:2106
|   usb_new_device.cold+0x537/0xccf drivers/usb/core/hub.c:2534
|   hub_port_connect drivers/usb/core/hub.c:5089 [inline]
|   hub_port_connect_change drivers/usb/core/hub.c:5204 [inline]
|   port_event drivers/usb/core/hub.c:5350 [inline]
|   hub_event+0x138e/0x3b00 drivers/usb/core/hub.c:5432
|   process_one_work+0x90f/0x1580 kernel/workqueue.c:2269
|   worker_thread+0x9b/0xe20 kernel/workqueue.c:2415
|   kthread+0x313/0x420 kernel/kthread.c:253
|   ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352

Reported-by: syzbot+1fcc5ef45175fc774231@syzkaller.appspotmail.com
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:34 +02:00
Icenowy Zheng 95b09c87f7 net: stmmac: sun8i: force select external PHY when no internal one
[ Upstream commit 0fec7e72ae ]

The PHY selection bit also exists on SoCs without an internal PHY; if it's
set to 1 (internal PHY, default value) then the MAC will not make use of
any PHY on such SoCs.

This problem appears when adapting for H6, which has no real internal PHY
(the "internal PHY" on H6 is not on-die, but on a co-packaged AC200 chip,
connected via RMII interface at GPIO bank A).

Force the PHY selection bit to 0 when the SOC doesn't have an internal PHY,
to address the problem of a wrong default value.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:34 +02:00
Hans Verkuil d0ce031dec media: hdpvr: fix locking and a missing msleep
[ Upstream commit 6bc5a4a192 ]

This driver has three locking issues:

- The wait_event_interruptible() condition calls hdpvr_get_next_buffer(dev)
  which uses a mutex, which is not allowed. Rewrite with list_empty_careful()
  that doesn't need locking.

- In hdpvr_read() the call to hdpvr_stop_streaming() didn't lock io_mutex,
  but it should have since stop_streaming expects that.

- In hdpvr_device_release() io_mutex was locked when calling flush_work(),
  but there it shouldn't take that mutex since the work done by flush_work()
  also wants to lock that mutex.

There are also two other changes (suggested by Keith):

- msecs_to_jiffies(4000); (a NOP) should have been msleep(4000).
- Change v4l2_dbg to v4l2_info to always log if streaming had to be restarted.

Reported-by: Keith Pyle <kpyle@austin.rr.com>
Suggested-by: Keith Pyle <kpyle@austin.rr.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:34 +02:00
André Almeida adb1d60e70 media: vimc: cap: check v4l2_fill_pixfmt return value
[ Upstream commit 77ae46e11d ]

v4l2_fill_pixfmt() returns -EINVAL if the pixelformat used as parameter is
invalid or if the user is trying to use a multiplanar format with the
singleplanar API. Currently, the vimc_cap_try_fmt_vid_cap() returns such
value, but vimc_cap_s_fmt_vid_cap() is ignoring it. Fix that and returns
an error value if vimc_cap_try_fmt_vid_cap() has failed.

Signed-off-by: André Almeida <andrealmeid@collabora.com>
Suggested-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:33 +02:00
Philipp Zabel 9a9ff8f128 media: coda: increment sequence offset for the last returned frame
[ Upstream commit b3b7d96817 ]

If no more frames are decoded in bitstream end mode, and a previously
decoded frame has been returned, the firmware still increments the frame
number. To avoid a sequence number mismatch after decoder restart,
increment the sequence_offset correction parameter.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:33 +02:00
Marco Felsch 0c4616125c media: coda: fix last buffer handling in V4L2_ENC_CMD_STOP
[ Upstream commit f3775f8985 ]

coda_encoder_cmd() is racy, as the last scheduled picture run worker can
still be in-flight while the ENC_CMD_STOP command is issued. Depending
on the exact timing the sequence numbers might already be changed, but
the last buffer might not have been put on the destination queue yet.

In this case the current implementation would prematurely wake the
destination queue with last_buffer_dequeued=true, causing userspace to
call streamoff before the last buffer is handled.

Close this race window by synchronizing with the pic_run_worker before
doing the sequence check.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
[l.stach@pengutronix.de: switch to flush_work, reword commit message]
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:33 +02:00
Philipp Zabel 2d8e49ffcb media: coda: fix mpeg2 sequence number handling
[ Upstream commit 56d159a4ec ]

Sequence number handling assumed that the BIT processor frame number
starts counting at 1, but this is not true for the MPEG-2 decoder,
which starts at 0. Fix the sequence counter offset detection to handle
this.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:33 +02:00
Ard Biesheuvel 2d04fe8a5c acpi/arm64: ignore 5.1 FADTs that are reported as 5.0
[ Upstream commit 2af22f3ec3 ]

Some Qualcomm Snapdragon based laptops built to run Microsoft Windows
are clearly ACPI 5.1 based, given that that is the first ACPI revision
that supports ARM, and introduced the FADT 'arm_boot_flags' field,
which has a non-zero field on those systems.

So in these cases, infer from the ARM boot flags that the FADT must be
5.1 or later, and treat it as 5.1.

Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Graeme Gregory <graeme.gregory@linaro.org>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:33 +02:00
Kuninori Morimoto f4fe0e0273 ASoC: soc-core: call snd_soc_unbind_card() under mutex_lock;
[ Upstream commit b545542a0b ]

commit 34ac3c3eb8 ("ASoC: core: lock client_mutex while removing
link components") added mutex_lock() at soc_remove_link_components().

Is is called from snd_soc_unbind_card()

	snd_soc_unbind_card()
=>		soc_remove_link_components()
		soc_cleanup_card_resources()
			soc_remove_dai_links()
=>				soc_remove_link_components()

And, there are 2 way to call it.

(1)
	snd_soc_unregister_component()
**		mutex_lock()
			snd_soc_component_del_unlocked()
=>				snd_soc_unbind_card()
**		mutex_unlock()

(2)
	snd_soc_unregister_card()
=>		snd_soc_unbind_card()

(1) case is already using mutex_lock() when it calles
snd_soc_unbind_card(), thus, we will get lockdep warning.

commit 495f926c68 ("ASoC: core: Fix deadlock in
snd_soc_instantiate_card()") tried to fixup it, but still not
enough. We still have lockdep warning when we try unbind/bind.

We need mutex_lock() under snd_soc_unregister_card()
instead of snd_remove_link_components()/snd_soc_unbind_card().

Fixes: 34ac3c3eb8 ("ASoC: core: lock client_mutex while removing link components")
Fixes: 495f926c68 ("ASoC: core: Fix deadlock in snd_soc_instantiate_card()")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:33 +02:00
Robert Jarzmik 8a0e34e49f media: mt9m111: fix fw-node refactoring
[ Upstream commit 8d4e29a51a ]

In the patch refactoring the fw-node, the mt9m111 was broken for all
platform_data based platforms, which were the first aim of this
driver. Only the devicetree platform are still functional, probably
because the testing was done on these.

The result is that -EINVAL is systematically return for such platforms,
what this patch fixes.

[Sakari Ailus: Rework this to resolve a merge conflict and use dev_fwnode]

Fixes: 98480d65c4 ("media: mt9m111: allow to setup pixclk polarity")
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:33 +02:00
Nathan Huckleberry c0730f79dc timer_list: Guard procfs specific code
[ Upstream commit a9314773a9 ]

With CONFIG_PROC_FS=n the following warning is emitted:

kernel/time/timer_list.c:361:36: warning: unused variable
'timer_list_sops' [-Wunused-const-variable]
   static const struct seq_operations timer_list_sops = {

Add #ifdef guard around procfs specific code.

Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: john.stultz@linaro.org
Cc: sboyd@kernel.org
Cc: clang-built-linux@googlegroups.com
Link: https://github.com/ClangBuiltLinux/linux/issues/534
Link: https://lkml.kernel.org/r/20190614181604.112297-1-nhuck@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:33 +02:00
Miroslav Lichvar b2e0490989 ntp: Limit TAI-UTC offset
[ Upstream commit d897a4ab11 ]

Don't allow the TAI-UTC offset of the system clock to be set by adjtimex()
to a value larger than 100000 seconds.

This prevents an overflow in the conversion to int, prevents the CLOCK_TAI
clock from getting too far ahead of the CLOCK_REALTIME clock, and it is
still large enough to allow leap seconds to be inserted at the maximum rate
currently supported by the kernel (once per day) for the next ~270 years,
however unlikely it is that someone can survive a catastrophic event which
slowed down the rotation of the Earth so much.

Reported-by: Weikang shi <swkhack@gmail.com>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190618154713.20929-1-mlichvar@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:32 +02:00
Anders Roxell 41e612fa1c media: i2c: fix warning same module names
[ Upstream commit b2ce5617da ]

When building with CONFIG_VIDEO_ADV7511 and CONFIG_DRM_I2C_ADV7511
enabled as loadable modules, we see the following warning:

  drivers/gpu/drm/bridge/adv7511/adv7511.ko
  drivers/media/i2c/adv7511.ko

Rework so that the file is named adv7511-v4l2.c.

Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:32 +02:00
Marek Szyprowski f37485cd10 media: s5p-mfc: Make additional clocks optional
[ Upstream commit e08efef8fe ]

Since the beginning the second clock ('special', 'sclk') was optional and
it is not available on some variants of Exynos SoCs (i.e. Exynos5420 with
v7 of MFC hardware).

However commit 1bce6fb3ed ("[media] s5p-mfc: Rework clock handling")
made handling of all specified clocks mandatory. This patch restores
original behavior of the driver and fixes its operation on
Exynos5420 SoCs.

Fixes: 1bce6fb3ed ("[media] s5p-mfc: Rework clock handling")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:32 +02:00
Julian Anastasov d53145e8f3 ipvs: defer hook registration to avoid leaks
[ Upstream commit cf47a0b882 ]

syzkaller reports for memory leak when registering hooks [1]

As we moved the nf_unregister_net_hooks() call into
__ip_vs_dev_cleanup(), defer the nf_register_net_hooks()
call, so that hooks are allocated and freed from same
pernet_operations (ipvs_core_dev_ops).

[1]
BUG: memory leak
unreferenced object 0xffff88810acd8a80 (size 96):
 comm "syz-executor073", pid 7254, jiffies 4294950560 (age 22.250s)
 hex dump (first 32 bytes):
   02 00 00 00 00 00 00 00 50 8b bb 82 ff ff ff ff  ........P.......
   00 00 00 00 00 00 00 00 00 77 bb 82 ff ff ff ff  .........w......
 backtrace:
   [<0000000013db61f1>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline]
   [<0000000013db61f1>] slab_post_alloc_hook mm/slab.h:439 [inline]
   [<0000000013db61f1>] slab_alloc_node mm/slab.c:3269 [inline]
   [<0000000013db61f1>] kmem_cache_alloc_node_trace+0x15b/0x2a0 mm/slab.c:3597
   [<000000001a27307d>] __do_kmalloc_node mm/slab.c:3619 [inline]
   [<000000001a27307d>] __kmalloc_node+0x38/0x50 mm/slab.c:3627
   [<0000000025054add>] kmalloc_node include/linux/slab.h:590 [inline]
   [<0000000025054add>] kvmalloc_node+0x4a/0xd0 mm/util.c:431
   [<0000000050d1bc00>] kvmalloc include/linux/mm.h:637 [inline]
   [<0000000050d1bc00>] kvzalloc include/linux/mm.h:645 [inline]
   [<0000000050d1bc00>] allocate_hook_entries_size+0x3b/0x60 net/netfilter/core.c:61
   [<00000000e8abe142>] nf_hook_entries_grow+0xae/0x270 net/netfilter/core.c:128
   [<000000004b94797c>] __nf_register_net_hook+0x9a/0x170 net/netfilter/core.c:337
   [<00000000d1545cbc>] nf_register_net_hook+0x34/0xc0 net/netfilter/core.c:464
   [<00000000876c9b55>] nf_register_net_hooks+0x53/0xc0 net/netfilter/core.c:480
   [<000000002ea868e0>] __ip_vs_init+0xe8/0x170 net/netfilter/ipvs/ip_vs_core.c:2280
   [<000000002eb2d451>] ops_init+0x4c/0x140 net/core/net_namespace.c:130
   [<000000000284ec48>] setup_net+0xde/0x230 net/core/net_namespace.c:316
   [<00000000a70600fa>] copy_net_ns+0xf0/0x1e0 net/core/net_namespace.c:439
   [<00000000ff26c15e>] create_new_namespaces+0x141/0x2a0 kernel/nsproxy.c:107
   [<00000000b103dc79>] copy_namespaces+0xa1/0xe0 kernel/nsproxy.c:165
   [<000000007cc008a2>] copy_process.part.0+0x11fd/0x2150 kernel/fork.c:2035
   [<00000000c344af7c>] copy_process kernel/fork.c:1800 [inline]
   [<00000000c344af7c>] _do_fork+0x121/0x4f0 kernel/fork.c:2369

Reported-by: syzbot+722da59ccb264bc19910@syzkaller.appspotmail.com
Fixes: 719c7d563c ("ipvs: Fix use-after-free in ip_vs_in")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:32 +02:00
Colin Ian King 556ae9c9a3 media: staging: davinci: fix memory leaks and check for allocation failure
[ Upstream commit a84e355ecd ]

There are three error return paths that don't kfree params causing a
memory leak.  Fix this by adding an error return path that kfree's
params before returning.  Also add a check to see params failed to
be allocated.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:32 +02:00
Arnd Bergmann 813c009e9b ipsec: select crypto ciphers for xfrm_algo
[ Upstream commit 597179b0ba ]

kernelci.org reports failed builds on arc because of what looks
like an old missed 'select' statement:

net/xfrm/xfrm_algo.o: In function `xfrm_probe_algs':
xfrm_algo.c:(.text+0x1e8): undefined reference to `crypto_has_ahash'

I don't see this in randconfig builds on other architectures, but
it's fairly clear we want to select the hash code for it, like we
do for all its other users. As Herbert points out, CRYPTO_BLKCIPHER
is also required even though it has not popped up in build tests.

Fixes: 17bc197022 ("ipsec: Use skcipher and ahash when probing algorithms")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:32 +02:00
Julien Thierry b7a9b93f91 arm64: Do not enable IRQs for ct_user_exit
[ Upstream commit 9034f62515 ]

For el0_dbg and el0_error, DAIF bits get explicitly cleared before
calling ct_user_exit.

When context tracking is disabled, DAIF gets set (almost) immediately
after. When context tracking is enabled, among the first things done
is disabling IRQs.

What is actually needed is:
- PSR.D = 0 so the system can be debugged (should be already the case)
- PSR.A = 0 so async error can be handled during context tracking

Do not clear PSR.I in those two locations.

Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:32 +02:00
Minwoo Im 8f0a41cd10 nvme-pci: adjust irq max_vector using num_possible_cpus()
[ Upstream commit dad77d6390 ]

If the "irq_queues" are greater than num_possible_cpus(),
nvme_calc_irq_sets() can have irq set_size for HCTX_TYPE_DEFAULT greater
than it can be afforded.
2039         affd->set_size[HCTX_TYPE_DEFAULT] = nrirqs - nr_read_queues;

It might cause a WARN() from the irq_build_affinity_masks() like [1]:
220         if (nr_present < numvecs)
221                 WARN_ON(nr_present + nr_others < numvecs);

This patch prevents it from the WARN() by adjusting the max_vector value
from the nvme_setup_irqs().

[1] WARN messages when modprobe nvme write_queues=32 poll_queues=0:
root@target:~/nvme# nproc
8
root@target:~/nvme# modprobe nvme write_queues=32 poll_queues=0
[   17.925326] nvme nvme0: pci function 0000:00:04.0
[   17.940601] WARNING: CPU: 3 PID: 1030 at kernel/irq/affinity.c:221 irq_create_affinity_masks+0x222/0x330
[   17.940602] Modules linked in: nvme nvme_core [last unloaded: nvme]
[   17.940605] CPU: 3 PID: 1030 Comm: kworker/u17:4 Tainted: G        W         5.1.0+ #156
[   17.940605] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[   17.940608] Workqueue: nvme-reset-wq nvme_reset_work [nvme]
[   17.940609] RIP: 0010:irq_create_affinity_masks+0x222/0x330
[   17.940611] Code: 4c 8d 4c 24 28 4c 8d 44 24 30 e8 c9 fa ff ff 89 44 24 18 e8 c0 38 fa ff 8b 44 24 18 44 8b 54 24 1c 5a 44 01 d0 41 39 c4 76 02 <0f> 0b 48 89 df 44 01 e5 e8 f1 ce 10 00 48 8b 34 24 44 89 f0 44 01
[   17.940611] RSP: 0018:ffffc90002277c50 EFLAGS: 00010216
[   17.940612] RAX: 0000000000000008 RBX: ffff88807ca48860 RCX: 0000000000000000
[   17.940612] RDX: ffff88807bc03800 RSI: 0000000000000020 RDI: 0000000000000000
[   17.940613] RBP: 0000000000000001 R08: ffffc90002277c78 R09: ffffc90002277c70
[   17.940613] R10: 0000000000000008 R11: 0000000000000001 R12: 0000000000000020
[   17.940614] R13: 0000000000025d08 R14: 0000000000000001 R15: ffff88807bc03800
[   17.940614] FS:  0000000000000000(0000) GS:ffff88807db80000(0000) knlGS:0000000000000000
[   17.940616] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   17.940617] CR2: 00005635e583f790 CR3: 000000000240a000 CR4: 00000000000006e0
[   17.940617] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   17.940618] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   17.940618] Call Trace:
[   17.940622]  __pci_enable_msix_range+0x215/0x540
[   17.940623]  ? kernfs_put+0x117/0x160
[   17.940625]  pci_alloc_irq_vectors_affinity+0x74/0x110
[   17.940626]  nvme_reset_work+0xc30/0x1397 [nvme]
[   17.940628]  ? __switch_to_asm+0x34/0x70
[   17.940628]  ? __switch_to_asm+0x40/0x70
[   17.940629]  ? __switch_to_asm+0x34/0x70
[   17.940630]  ? __switch_to_asm+0x40/0x70
[   17.940630]  ? __switch_to_asm+0x34/0x70
[   17.940631]  ? __switch_to_asm+0x40/0x70
[   17.940632]  ? nvme_irq_check+0x30/0x30 [nvme]
[   17.940633]  process_one_work+0x20b/0x3e0
[   17.940634]  worker_thread+0x1f9/0x3d0
[   17.940635]  ? cancel_delayed_work+0xa0/0xa0
[   17.940636]  kthread+0x117/0x120
[   17.940637]  ? kthread_stop+0xf0/0xf0
[   17.940638]  ret_from_fork+0x3a/0x50
[   17.940639] ---[ end trace aca8a131361cd42a ]---
[   17.942124] nvme nvme0: 7/1/0 default/read/poll queues

Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:32 +02:00
Geert Uytterhoeven cf1d95daf1 lightnvm: fix uninitialized pointer in nvm_remove_tgt()
[ Upstream commit 2f5af4ab7d ]

With gcc 4.1:

    drivers/lightnvm/core.c: In function ‘nvm_remove_tgt’:
    drivers/lightnvm/core.c:510: warning: ‘t’ is used uninitialized in this function

Indeed, if no NVM devices have been registered, t will be an
uninitialized pointer, and may be dereferenced later.  A call to
nvm_remove_tgt() can be triggered from userspace by issuing the
NVM_DEV_REMOVE ioctl on the lightnvm control device.

Fix this by preinitializing t to NULL.

Fixes: 843f2edbdd ("lightnvm: do not remove instance under global lock")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:31 +02:00
Heiner Litz c8a410cd3c lightnvm: pblk: fix freeing of merged pages
[ Upstream commit 510fd8ea98 ]

bio_add_pc_page() may merge pages when a bio is padded due to a flush.
Fix iteration over the bio to free the correct pages in case of a merge.

Signed-off-by: Heiner Litz <hlitz@ucsc.edu>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:31 +02:00
Chaitanya Kulkarni ad99783841 nvme-pci: set the errno on ctrl state change error
[ Upstream commit e71afda493 ]

This patch removes the confusing assignment of the variable result at
the time of declaration and sets the value in error cases next to the
places where the actual error is happening.

Here we also set the result value to -ENODEV when we fail at the final
ctrl state transition in nvme_reset_work(). Without this assignment
result will hold 0 from nvme_setup_io_queue() and on failure 0 will be
passed to he nvme_remove_dead_ctrl() from final state transition.

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:31 +02:00
Minwoo Im 7cb611ce5b nvme-pci: properly report state change failure in nvme_reset_work
[ Upstream commit cee6c269b0 ]

If the state change to NVME_CTRL_CONNECTING fails, the dmesg is going to
be like:

  [  293.689160] nvme nvme0: failed to mark controller CONNECTING
  [  293.689160] nvme nvme0: Removing after probe failure status: 0

Even it prints the first line to indicate the situation, the second line
is not proper because the status is 0 which means normally success of
the previous operation.

This patch makes it indicate the proper error value when it fails.
  [   25.932367] nvme nvme0: failed to mark controller CONNECTING
  [   25.932369] nvme nvme0: Removing after probe failure status: -16

This situation is able to be easily reproduced by:
  root@target:~# rmmod nvme && modprobe nvme && rmmod nvme

Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:31 +02:00
Anton Eidelman 6a64b52a5f nvme: fix possible io failures when removing multipathed ns
[ Upstream commit 2181e45561 ]

When a shared namespace is removed, we call blk_cleanup_queue()
when the device can still be accessed as the current path and this can
result in submission to a dying queue. Hence, direct_make_request()
called by our mpath device may fail (propagating the failure to userspace).
Instead, we want to failover this I/O to a different path if one exists.
Thus, before we cleanup the request queue, we make sure that the device is
cleared from the current path nor it can be selected again as such.

Fix this by:
- clear the ns from the head->list and synchronize rcu to make sure there is
  no concurrent path search that restores it as the current path
- clear the mpath current path in order to trigger a subsequent path search
  and sync srcu to wait for any ongoing request submissions
- safely continue to namespace removal and blk_cleanup_queue

Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:31 +02:00
Pan Bian 4e0fff95af EDAC/sysfs: Fix memory leak when creating a csrow object
[ Upstream commit 585fb3d93d ]

In edac_create_csrow_object(), the reference to the object is not
released when adding the device to the device hierarchy fails
(device_add()). This may result in a memory leak.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: https://lkml.kernel.org/r/1555554438-103953-1-git-send-email-bianpan2016@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:31 +02:00
Greg KH e39f0772b9 EDAC/sysfs: Drop device references properly
[ Upstream commit 7adc05d2dc ]

Do put_device() if device_add() fails.

 [ bp: do device_del() for the successfully created devices in
   edac_create_csrow_objects(), on the unwind path. ]

Signed-off-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20190427214925.GE16338@kroah.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:31 +02:00
Tudor Ambarus f96a5d4b1b spi: fix ctrl->num_chipselect constraint
[ Upstream commit f9481b0822 ]

at91sam9g25ek showed the following error at probe:
atmel_spi f0000000.spi: Using dma0chan2 (tx) and dma0chan3 (rx)
for DMA transfers
atmel_spi: probe of f0000000.spi failed with error -22

Commit 0a919ae492 ("spi: Don't call spi_get_gpio_descs() before device name is set")
moved the calling of spi_get_gpio_descs() after ctrl->dev is set,
but didn't move the !ctrl->num_chipselect check. When there are
chip selects in the device tree, the spi-atmel driver lets the
SPI core discover them when registering the SPI master.
The ctrl->num_chipselect is thus expected to be set by
spi_get_gpio_descs().

Move the !ctlr->num_chipselect after spi_get_gpio_descs() as it was
before the aforementioned commit. While touching this block, get rid
of the explicit comparison with 0 and update the commenting style.

Fixes: 0a919ae492 ("spi: Don't call spi_get_gpio_descs() before device name is set")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:31 +02:00
Rafael J. Wysocki a257222d84 ACPICA: Clear status of GPEs on first direct enable
[ Upstream commit 44758bafa5 ]

ACPI GPEs (other than the EC one) can be enabled in two situations.
First, the GPEs with existing _Lxx and _Exx methods are enabled
implicitly by ACPICA during system initialization.  Second, the
GPEs without these methods (like GPEs listed by _PRW objects for
wakeup devices) need to be enabled directly by the code that is
going to use them (e.g. ACPI power management or device drivers).

In the former case, if the status of a given GPE is set to start
with, its handler method (either _Lxx or _Exx) needs to be invoked
to take care of the events (possibly) signaled before the GPE was
enabled.  In the latter case, however, the first caller of
acpi_enable_gpe() for a given GPE should not be expected to care
about any events that might be signaled through it earlier.  In
that case, it is better to clear the status of the GPE before
enabling it, to prevent stale events from triggering unwanted
actions (like spurious system resume, for example).

For this reason, modify acpi_ev_add_gpe_reference() to take an
additional boolean argument indicating whether or not the GPE
status needs to be cleared when its reference counter changes from
zero to one and make acpi_enable_gpe() pass TRUE to it through
that new argument.

Fixes: 18996f2db9 ("ACPICA: Events: Stop unconditionally clearing ACPI IRQs during suspend/resume")
Reported-by: Furquan Shaikh <furquan@google.com>
Tested-by: Furquan Shaikh <furquan@google.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:30 +02:00
Dennis Zhou ffebee147b blk-iolatency: only account submitted bios
[ Upstream commit a3fb01ba5a ]

As is, iolatency recognizes done_bio and cleanup as ending paths. If a
request is marked REQ_NOWAIT and fails to get a request, the bio is
cleaned up via rq_qos_cleanup() and ended in bio_wouldblock_error().
This results in underflowing the inflight counter. Fix this by only
accounting bios that were actually submitted.

Signed-off-by: Dennis Zhou <dennis@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:30 +02:00
Qian Cai 3bd2baa72c x86/cacheinfo: Fix a -Wtype-limits warning
[ Upstream commit 1b7aebf048 ]

cpuinfo_x86.x86_model is an unsigned type, so comparing against zero
will generate a compilation warning:

  arch/x86/kernel/cpu/cacheinfo.c: In function 'cacheinfo_amd_init_llc_id':
  arch/x86/kernel/cpu/cacheinfo.c:662:19: warning: comparison is always true \
    due to limited range of data type [-Wtype-limits]

Remove the unnecessary lower bound check.

 [ bp: Massage. ]

Fixes: 68091ee7ac ("x86/CPU/AMD: Calculate last level cache ID from number of sharing threads")
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Pu Wen <puwen@hygon.cn>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/1560954773-11967-1-git-send-email-cai@lca.pw
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:30 +02:00
Ilias Apalodimas a294b5786e net: netsec: initialize tx ring on ndo_open
[ Upstream commit 39e3622ede ]

Since we changed the Tx ring handling and now depends on bit31 to figure
out the owner of the descriptor, we should initialize this every time
the device goes down-up instead of doing it once on driver init. If the
value is not correctly initialized the device won't have any available
descriptors

Changes since v1:
- Typo fixes

Fixes: 35e07d2347 ("net: socionext: remove mmio reads on Tx")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:30 +02:00
Mika Westerberg 5817d78eba PCI: Add missing link delays required by the PCIe spec
[ Upstream commit c2bf1fc212 ]

Currently Linux does not follow PCIe spec regarding the required delays
after reset. A concrete example is a Thunderbolt add-in-card that
consists of a PCIe switch and two PCIe endpoints:

  +-1b.0-[01-6b]----00.0-[02-6b]--+-00.0-[03]----00.0 TBT controller
                                  +-01.0-[04-36]-- DS hotplug port
                                  +-02.0-[37]----00.0 xHCI controller
                                  \-04.0-[38-6b]-- DS hotplug port

The root port (1b.0) and the PCIe switch downstream ports are all PCIe
gen3 so they support 8GT/s link speeds.

We wait for the PCIe hierarchy to enter D3cold (runtime):

  pcieport 0000:00:1b.0: power state changed by ACPI to D3cold

When it wakes up from D3cold, according to the PCIe 4.0 section 5.8 the
PCIe switch is put to reset and its power is re-applied. This means that
we must follow the rules in PCIe 4.0 section 6.6.1.

For the PCIe gen3 ports we are dealing with here, the following applies:

  With a Downstream Port that supports Link speeds greater than 5.0
  GT/s, software must wait a minimum of 100 ms after Link training
  completes before sending a Configuration Request to the device
  immediately below that Port. Software can determine when Link training
  completes by polling the Data Link Layer Link Active bit or by setting
  up an associated interrupt (see Section 6.7.3.3).

Translating this into the above topology we would need to do this (DLLLA
stands for Data Link Layer Link Active):

  pcieport 0000:00:1b.0: wait for 100ms after DLLLA is set before access to 0000:01:00.0
  pcieport 0000:02:00.0: wait for 100ms after DLLLA is set before access to 0000:03:00.0
  pcieport 0000:02:02.0: wait for 100ms after DLLLA is set before access to 0000:37:00.0

I've instrumented the kernel with additional logging so we can see the
actual delays the kernel performs:

  pcieport 0000:00:1b.0: power state changed by ACPI to D0
  pcieport 0000:00:1b.0: waiting for D3cold delay of 100 ms
  pcieport 0000:00:1b.0: waking up bus
  pcieport 0000:00:1b.0: waiting for D3hot delay of 10 ms
  pcieport 0000:00:1b.0: restoring config space at offset 0x2c (was 0x60, writing 0x60)
  ...
  pcieport 0000:00:1b.0: PME# disabled
  pcieport 0000:01:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  ...
  pcieport 0000:01:00.0: PME# disabled
  pcieport 0000:02:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  ...
  pcieport 0000:02:00.0: PME# disabled
  pcieport 0000:02:01.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  ...
  pcieport 0000:02:01.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407)
  pcieport 0000:02:01.0: PME# disabled
  pcieport 0000:02:02.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  ...
  pcieport 0000:02:02.0: PME# disabled
  pcieport 0000:02:04.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  ...
  pcieport 0000:02:04.0: PME# disabled
  pcieport 0000:02:01.0: PME# enabled
  pcieport 0000:02:01.0: waiting for D3hot delay of 10 ms
  pcieport 0000:02:04.0: PME# enabled
  pcieport 0000:02:04.0: waiting for D3hot delay of 10 ms
  thunderbolt 0000:03:00.0: restoring config space at offset 0x14 (was 0x0, writing 0x8a040000)
  ...
  thunderbolt 0000:03:00.0: PME# disabled
  xhci_hcd 0000:37:00.0: restoring config space at offset 0x10 (was 0x0, writing 0x73f00000)
  ...
  xhci_hcd 0000:37:00.0: PME# disabled

For the switch upstream port (01:00.0) we wait for 100ms but not taking
into account the DLLLA requirement. We then wait 10ms for D3hot -> D0
transition of the root port and the two downstream hotplug ports. This
means that we deviate from what the spec requires.

Performing the same check for system sleep (s2idle) transitions we can
see following when resuming from s2idle:

  pcieport 0000:00:1b.0: power state changed by ACPI to D0
  pcieport 0000:00:1b.0: restoring config space at offset 0x2c (was 0x60, writing 0x60)
  ...
  pcieport 0000:01:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  ...
  pcieport 0000:02:02.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  pcieport 0000:02:02.0: restoring config space at offset 0x2c (was 0x0, writing 0x0)
  pcieport 0000:02:01.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  pcieport 0000:02:04.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  pcieport 0000:02:02.0: restoring config space at offset 0x28 (was 0x0, writing 0x0)
  pcieport 0000:02:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  pcieport 0000:02:02.0: restoring config space at offset 0x24 (was 0x10001, writing 0x1fff1)
  pcieport 0000:02:01.0: restoring config space at offset 0x2c (was 0x0, writing 0x60)
  pcieport 0000:02:02.0: restoring config space at offset 0x20 (was 0x0, writing 0x73f073f0)
  pcieport 0000:02:04.0: restoring config space at offset 0x2c (was 0x0, writing 0x60)
  pcieport 0000:02:01.0: restoring config space at offset 0x28 (was 0x0, writing 0x60)
  pcieport 0000:02:00.0: restoring config space at offset 0x2c (was 0x0, writing 0x0)
  pcieport 0000:02:02.0: restoring config space at offset 0x1c (was 0x101, writing 0x1f1)
  pcieport 0000:02:04.0: restoring config space at offset 0x28 (was 0x0, writing 0x60)
  pcieport 0000:02:01.0: restoring config space at offset 0x24 (was 0x10001, writing 0x1ff10001)
  pcieport 0000:02:00.0: restoring config space at offset 0x28 (was 0x0, writing 0x0)
  pcieport 0000:02:02.0: restoring config space at offset 0x18 (was 0x0, writing 0x373702)
  pcieport 0000:02:04.0: restoring config space at offset 0x24 (was 0x10001, writing 0x49f12001)
  pcieport 0000:02:01.0: restoring config space at offset 0x20 (was 0x0, writing 0x73e05c00)
  pcieport 0000:02:00.0: restoring config space at offset 0x24 (was 0x10001, writing 0x1fff1)
  pcieport 0000:02:04.0: restoring config space at offset 0x20 (was 0x0, writing 0x89f07400)
  pcieport 0000:02:01.0: restoring config space at offset 0x1c (was 0x101, writing 0x5151)
  pcieport 0000:02:00.0: restoring config space at offset 0x20 (was 0x0, writing 0x8a008a00)
  pcieport 0000:02:02.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020)
  pcieport 0000:02:04.0: restoring config space at offset 0x1c (was 0x101, writing 0x6161)
  pcieport 0000:02:01.0: restoring config space at offset 0x18 (was 0x0, writing 0x360402)
  pcieport 0000:02:00.0: restoring config space at offset 0x1c (was 0x101, writing 0x1f1)
  pcieport 0000:02:04.0: restoring config space at offset 0x18 (was 0x0, writing 0x6b3802)
  pcieport 0000:02:02.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407)
  pcieport 0000:02:00.0: restoring config space at offset 0x18 (was 0x0, writing 0x30302)
  pcieport 0000:02:01.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020)
  pcieport 0000:02:04.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020)
  pcieport 0000:02:00.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020)
  pcieport 0000:02:01.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407)
  pcieport 0000:02:04.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407)
  pcieport 0000:02:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407)
  xhci_hcd 0000:37:00.0: restoring config space at offset 0x10 (was 0x0, writing 0x73f00000)
  ...
  thunderbolt 0000:03:00.0: restoring config space at offset 0x14 (was 0x0, writing 0x8a040000)

This is even worse. None of the mandatory delays are performed. If this
would be S3 instead of s2idle then according to PCI FW spec 3.2 section
4.6.8.  there is a specific _DSM that allows the OS to skip the delays
but this platform does not provide the _DSM and does not go to S3 anyway
so no firmware is involved that could already handle these delays.

In this particular Intel Coffee Lake platform these delays are not
actually needed because there is an additional delay as part of the ACPI
power resource that is used to turn on power to the hierarchy but since
that additional delay is not required by any of standards (PCIe, ACPI)
it is not present in the Intel Ice Lake, for example where missing the
mandatory delays causes pciehp to start tearing down the stack too early
(links are not yet trained).

For this reason, change the PCIe portdrv PM resume hooks so that they
perform the mandatory delays before the downstream component gets
resumed. We perform the delays before port services are resumed because
otherwise pciehp might find that the link is not up (even if it is just
training) and tears-down the hierarchy.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:30 +02:00
Arnaldo Carvalho de Melo b1d218908e perf build: Handle slang being in /usr/include and in /usr/include/slang/
[ Upstream commit 78d6ccce03 ]

In some distros slang.h may be in a /usr/include 'slang' subdir, so use
the if slang is not explicitely disabled (by using NO_SLANG=1) and its
feature test for the common case (having /usr/include/slang.h) failed,
use the results for the test that checks if it is in slang/slang.h.

Change the only file in perf that includes slang.h to use
HAVE_SLANG_INCLUDE_SUBDIR and forget about this for good.

On a rhel6 system now we have:

  $ /tmp/build/perf/perf -vv | grep slang
                libslang: [ on  ]  # HAVE_SLANG_SUPPORT
  $ ldd /tmp/build/perf/perf | grep libslang
  	libslang.so.2 => /usr/lib64/libslang.so.2 (0x00007fa2d5a8d000)
  $ grep slang /tmp/build/perf/FEATURE-DUMP
  feature-libslang=0
  feature-libslang-include-subdir=1
  $ cat /etc/redhat-release
  CentOS release 6.10 (Final)
  $

While on fedora:29:

  $ /tmp/build/perf/perf -vv | grep slang
                libslang: [ on  ]  # HAVE_SLANG_SUPPORT
  $ ldd /tmp/build/perf/perf | grep slang
  	libslang.so.2 => /lib64/libslang.so.2 (0x00007f8eb11a7000)
  $ grep slang /tmp/build/perf/FEATURE-DUMP
  feature-libslang=1
  feature-libslang-include-subdir=1
  $
  $ cat /etc/fedora-release
  Fedora release 29 (Twenty Nine)
  $

The feature-libslang-include-subdir=1 line is because the 'gettid()'
test was added to test-all.c as the new glibc has an implementation for
that, so we soon should have it not failing, i.e. should be the common
case soon. Perhaps I should move it out till it becomes the norm...

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 1955c8cf5e ("perf tools: Don't hardcode host include path for libslang")
Link: https://lkml.kernel.org/n/tip-bkgtpsu3uit821fuwsdhj9gd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:30 +02:00
Alexei Starovoitov c407f8770e bpf: fix callees pruning callers
[ Upstream commit eea1c227b9 ]

The commit 7640ead939 partially resolved the issue of callees
incorrectly pruning the callers.
With introduction of bounded loops and jmps_processed heuristic
single verifier state may contain multiple branches and calls.
It's possible that new verifier state (for future pruning) will be
allocated inside callee. Then callee will exit (still within the same
verifier state). It will go back to the caller and there R6-R9 registers
will be read and will trigger mark_reg_read. But the reg->live for all frames
but the top frame is not set to LIVE_NONE. Hence mark_reg_read will fail
to propagate liveness into parent and future walking will incorrectly
conclude that the states are equivalent because LIVE_READ is not set.
In other words the rule for parent/live should be:
whenever register parentage chain is set the reg->live should be set to LIVE_NONE.
is_state_visited logic already follows this rule for spilled registers.

Fixes: 7640ead939 ("bpf: verifier: make sure callees don't prune with caller differences")
Fixes: f4d7e40a5b ("bpf: introduce function calls (verification)")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:30 +02:00
Arnaldo Carvalho de Melo 3c0f17e285 tools build: Fix the zstd test in the test-all.c common case feature test
[ Upstream commit 3469fa84c1 ]

We were renanimg 'main' to 'main_zstd' but then using 'main_libzstd();'
in the main() for test-all.c, causing this:

  $ cat /tmp/build/perf/feature/test-all.make.output
  test-all.c: In function ‘main’:
  test-all.c:236:2: error: implicit declaration of function ‘main_test_libzstd’; did you mean ‘main_test_zstd’? [-Werror=implicit-function-declaration]
    main_test_libzstd();
    ^~~~~~~~~~~~~~~~~
    main_test_zstd
  cc1: all warnings being treated as errors
  $

I.e. what was supposed to be the fast path feature test was _always_
failing, duh, fix it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Fixes: 3b1c5d9659 ("tools build: Implement libzstd feature check, LIBZSTD_DIR and NO_LIBZSTD defines")
Link: https://lkml.kernel.org/n/tip-ma4abk0utroiw4mwpmvnjlru@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:29 +02:00
Nilkanth Ahirrao 38bded1215 ASoC: rsnd: fixup mod ID calculation in rsnd_ctu_probe_
[ Upstream commit ac28ec07ae ]

commit c16015f36c ("ASoC: rsnd: add .get_id/.get_id_sub")
introduces rsnd_ctu_id which calcualates and gives
the main Device id of the CTU by dividing the id by 4.
rsnd_mod_id uses this interface to get the CTU main
Device id. But this commit forgets to revert the main
Device id calcution previously done in rsnd_ctu_probe_
which also divides the id by 4. This path corrects the
same to get the correct main Device id.

The issue is observered when rsnd_ctu_probe_ is done for CTU1

Fixes: c16015f36c ("ASoC: rsnd: add .get_id/.get_id_sub")

Signed-off-by: Nilkanth Ahirrao <anilkanth@jp.adit-jv.com>
Signed-off-by: Suresh Udipi <sudipi@jp.adit-jv.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:29 +02:00
Denis Kirjanov 255333f141 ipoib: correcly show a VF hardware address
[ Upstream commit 64d701c608 ]

in the case of IPoIB with SRIOV enabled hardware
ip link show command incorrecly prints
0 instead of a VF hardware address.

Before:
11: ib1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc pfifo_fast
state UP mode DEFAULT group default qlen 256
    link/infiniband
80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd
00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
    vf 0 MAC 00:00:00:00:00:00, spoof checking off, link-state disable,
trust off, query_rss off
...
After:
11: ib1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc pfifo_fast
state UP mode DEFAULT group default qlen 256
    link/infiniband
80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd
00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
    vf 0     link/infiniband
80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd
00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff, spoof
checking off, link-state disable, trust off, query_rss off

v1->v2: just copy an address without modifing ifla_vf_mac
v2->v3: update the changelog

Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:29 +02:00
Mitch Williams 833577ecf3 iavf: allow null RX descriptors
[ Upstream commit efa14c3985 ]

In some circumstances, the hardware can hand us a null receive
descriptor, with no data attached but otherwise valid. Unfortunately,
the driver was ill-equipped to handle such an event, and would stop
processing packets at that point.

To fix this, use the Descriptor Done bit instead of the size to
determine whether or not a descriptor is ready to be processed. Add some
checks to allow for unused buffers.

Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:29 +02:00
Jason Wang 9d28094f3c vhost_net: disable zerocopy by default
[ Upstream commit 098eadce3c ]

Vhost_net was known to suffer from HOL[1] issues which is not easy to
fix. Several downstream disable the feature by default. What's more,
the datapath was split and datacopy path got the support of batching
and XDP support recently which makes it faster than zerocopy part for
small packets transmission.

It looks to me that disable zerocopy by default is more
appropriate. It cold be enabled by default again in the future if we
fix the above issues.

[1] https://patchwork.kernel.org/patch/3787671/

Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:29 +02:00
Arnaldo Carvalho de Melo 9c88708a3b perf evsel: Make perf_evsel__name() accept a NULL argument
[ Upstream commit fdbdd7e858 ]

In which case it simply returns "unknown", like when it can't figure out
the evsel->name value.

This makes this code more robust and fixes a problem in 'perf trace'
where a NULL evsel was being passed to a routine that only used the
evsel for printing its name when a invalid syscall id was passed.

Reported-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-f30ztaasku3z935cn3ak3h53@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:29 +02:00
Peter Zijlstra 2175aa3f1a x86/atomic: Fix smp_mb__{before,after}_atomic()
[ Upstream commit 69d927bba3 ]

Recent probing at the Linux Kernel Memory Model uncovered a
'surprise'. Strongly ordered architectures where the atomic RmW
primitive implies full memory ordering and
smp_mb__{before,after}_atomic() are a simple barrier() (such as x86)
fail for:

	*x = 1;
	atomic_inc(u);
	smp_mb__after_atomic();
	r0 = *y;

Because, while the atomic_inc() implies memory order, it
(surprisingly) does not provide a compiler barrier. This then allows
the compiler to re-order like so:

	atomic_inc(u);
	*x = 1;
	smp_mb__after_atomic();
	r0 = *y;

Which the CPU is then allowed to re-order (under TSO rules) like:

	atomic_inc(u);
	r0 = *y;
	*x = 1;

And this very much was not intended. Therefore strengthen the atomic
RmW ops to include a compiler barrier.

NOTE: atomic_{or,and,xor} and the bitops already had the compiler
barrier.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:29 +02:00
Geert Uytterhoeven 179cdf4ff3 integrity: Fix __integrity_init_keyring() section mismatch
[ Upstream commit 8c655784e2 ]

With gcc-4.6.3:

    WARNING: vmlinux.o(.text.unlikely+0x24c64): Section mismatch in reference from the function __integrity_init_keyring() to the function .init.text:set_platform_trusted_keys()
    The function __integrity_init_keyring() references
    the function __init set_platform_trusted_keys().
    This is often because __integrity_init_keyring lacks a __init
    annotation or the annotation of set_platform_trusted_keys is wrong.

Indeed, if the compiler decides not to inline __integrity_init_keyring(),
a warning is issued.

Fix this by adding the missing __init annotation.

Fixes: 9dc92c4517 ("integrity: Define a trusted platform keyring")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:28 +02:00
Kan Liang 11113029ac perf/x86/intel/uncore: Handle invalid event coding for free-running counter
[ Upstream commit 543ac280b3 ]

Counting with invalid event coding for free-running counter may cause
OOPs, e.g. uncore_iio_free_running_0/event=1/.

Current code only validate the event with free-running event format,
event=0xff,umask=0xXY. Non-free-running event format never be checked
for the PMU with free-running counters.

Add generic hw_config() to check and reject the invalid event coding
for free-running PMU.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: eranian@google.com
Fixes: 0f519f0352 ("perf/x86/intel/uncore: Support IIO free-running counters on SKX")
Link: https://lkml.kernel.org/r/1556672028-119221-2-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:28 +02:00
Jiri Olsa eb3a8802d3 perf/x86/intel: Disable check_msr for real HW
[ Upstream commit d0e1a507bd ]

Tom Vaden reported false failure of the check_msr() function, because
some servers can do POST tracing and enable LBR tracing during
bootup.

Kan confirmed that check_msr patch was to fix a bug report in
guest, so it's ok to disable it for real HW.

Reported-by: Tom Vaden <tom.vaden@hpe.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tom Vaden <tom.vaden@hpe.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Liang Kan <kan.liang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190616141313.GD2500@krava
[ Readability edits. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:28 +02:00
Qian Cai 41a811e161 sched/fair: Fix "runnable_avg_yN_inv" not used warnings
[ Upstream commit 509466b7d4 ]

runnable_avg_yN_inv[] is only used in kernel/sched/pelt.c but was
included in several other places because they need other macros all
came from kernel/sched/sched-pelt.h which was generated by
Documentation/scheduler/sched-pelt. As the result, it causes compilation
a lot of warnings,

  kernel/sched/sched-pelt.h:4:18: warning: 'runnable_avg_yN_inv' defined but not used [-Wunused-const-variable=]
  kernel/sched/sched-pelt.h:4:18: warning: 'runnable_avg_yN_inv' defined but not used [-Wunused-const-variable=]
  kernel/sched/sched-pelt.h:4:18: warning: 'runnable_avg_yN_inv' defined but not used [-Wunused-const-variable=]
  ...

Silence it by appending the __maybe_unused attribute for it, so all
generated variables and macros can still be kept in the same file.

Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1559596304-31581-1-git-send-email-cai@lca.pw
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:28 +02:00
Kan Liang 161c926ba6 perf/x86/intel: Add more Icelake CPUIDs
[ Upstream commit faaeff9866 ]

Add new model number for Icelake desktop and server to perf.

The data source encoding for Icelake server is the same as Skylake
server.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: qiuxu.zhuo@intel.com
Cc: rui.zhang@intel.com
Cc: tony.luck@intel.com
Link: https://lkml.kernel.org/r/20190603134122.13853-2-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:28 +02:00
Gao Xiang 29c36efe71 sched/core: Add __sched tag for io_schedule()
[ Upstream commit e3b929b0a1 ]

Non-inline io_schedule() was introduced in:

  commit 10ab56434f ("sched/core: Separate out io_schedule_prepare() and io_schedule_finish()")

Keep in line with io_schedule_timeout(), otherwise "/proc/<pid>/wchan" will
report io_schedule() rather than its callers when waiting for IO.

Reported-by: Jilong Kou <koujilong@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Miao Xie <miaoxie@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 10ab56434f ("sched/core: Separate out io_schedule_prepare() and io_schedule_finish()")
Link: https://lkml.kernel.org/r/20190603091338.2695-1-gaoxiang25@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:28 +02:00
Nicolas Dichtel cddcfccf8f xfrm: fix sa selector validation
[ Upstream commit b8d6d00797 ]

After commit b38ff4075a, the following command does not work anymore:
$ ip xfrm state add src 10.125.0.2 dst 10.125.0.1 proto esp spi 34 reqid 1 \
  mode tunnel enc 'cbc(aes)' 0xb0abdba8b782ad9d364ec81e3a7d82a1 auth-trunc \
  'hmac(sha1)' 0xe26609ebd00acb6a4d51fca13e49ea78a72c73e6 96 flag align4

In fact, the selector is not mandatory, allow the user to provide an empty
selector.

Fixes: b38ff4075a ("xfrm: Fix xfrm sel prefix length validation")
CC: Anirudh Gupta <anirudh.gupta@sophos.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:27 +02:00
Tejun Heo f92c955af7 blkcg, writeback: dead memcgs shouldn't contribute to writeback ownership arbitration
[ Upstream commit 6631142229 ]

wbc_account_io() collects information on cgroup ownership of writeback
pages to determine which cgroup should own the inode.  Pages can stay
associated with dead memcgs but we want to avoid attributing IOs to
dead blkcgs as much as possible as the association is likely to be
stale.  However, currently, pages associated with dead memcgs
contribute to the accounting delaying and/or confusing the
arbitration.

Fix it by ignoring pages associated with dead memcgs.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:27 +02:00
Bob Liu c538dfa073 block: null_blk: fix race condition for null_del_dev
[ Upstream commit 7602843fd8 ]

Dulicate call of null_del_dev() will trigger null pointer error like below.
The reason is a race condition between nullb_device_power_store() and
nullb_group_drop_item().

  CPU#0                         CPU#1
  ----------------              -----------------
  do_rmdir()
   >configfs_rmdir()
    >client_drop_item()
     >nullb_group_drop_item()
                                nullb_device_power_store()
				>null_del_dev()

      >test_and_clear_bit(NULLB_DEV_FL_UP
       >null_del_dev()
       ^^^^^
       Duplicated null_dev_dev() triger null pointer error

				>clear_bit(NULLB_DEV_FL_UP

The fix could be keep the sequnce of clear NULLB_DEV_FL_UP and null_del_dev().

[  698.613600] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
[  698.613608] #PF error: [normal kernel read fault]
[  698.613611] PGD 0 P4D 0
[  698.613619] Oops: 0000 [#1] SMP PTI
[  698.613627] CPU: 3 PID: 6382 Comm: rmdir Not tainted 5.0.0+ #35
[  698.613631] Hardware name: LENOVO 20LJS2EV08/20LJS2EV08, BIOS R0SET33W (1.17 ) 07/18/2018
[  698.613644] RIP: 0010:null_del_dev+0xc/0x110 [null_blk]
[  698.613649] Code: 00 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b eb 97 e8 47 bb 2a e8 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 54 53 <8b> 77 18 48 89 fb 4c 8b 27 48 c7 c7 40 57 1e c1 e8 bf c7 cb e8 48
[  698.613654] RSP: 0018:ffffb887888bfde0 EFLAGS: 00010286
[  698.613659] RAX: 0000000000000000 RBX: ffff9d436d92bc00 RCX: ffff9d43a9184681
[  698.613663] RDX: ffffffffc11e5c30 RSI: 0000000068be6540 RDI: 0000000000000000
[  698.613667] RBP: ffffb887888bfdf0 R08: 0000000000000001 R09: 0000000000000000
[  698.613671] R10: ffffb887888bfdd8 R11: 0000000000000f16 R12: ffff9d436d92bc08
[  698.613675] R13: ffff9d436d94e630 R14: ffffffffc11e5088 R15: ffffffffc11e5000
[  698.613680] FS:  00007faa68be6540(0000) GS:ffff9d43d14c0000(0000) knlGS:0000000000000000
[  698.613685] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  698.613689] CR2: 0000000000000018 CR3: 000000042f70c002 CR4: 00000000003606e0
[  698.613693] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  698.613697] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  698.613700] Call Trace:
[  698.613712]  nullb_group_drop_item+0x50/0x70 [null_blk]
[  698.613722]  client_drop_item+0x29/0x40
[  698.613728]  configfs_rmdir+0x1ed/0x300
[  698.613738]  vfs_rmdir+0xb2/0x130
[  698.613743]  do_rmdir+0x1c7/0x1e0
[  698.613750]  __x64_sys_rmdir+0x17/0x20
[  698.613759]  do_syscall_64+0x5a/0x110
[  698.613768]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Signed-off-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:27 +02:00
Yunsheng Lin 64db92d1cc net: hns3: delay ring buffer clearing during reset
[ Upstream commit 3a30964a2e ]

The driver may not be able to disable the ring through firmware
when downing the netdev during reset process, which may cause
hardware accessing freed buffer problem.

This patch delays the ring buffer clearing to reset uninit
process because hardware will not access the ring buffer after
hardware reset is completed.

Fixes: bb6b94a896 ("net: hns3: Add reset interface implementation in client")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:27 +02:00
Yunsheng Lin 648e4b6b43 net: hns3: fix for skb leak when doing selftest
[ Upstream commit 8f9eed1a87 ]

If hns3_nic_net_xmit does not return NETDEV_TX_BUSY when doing
a loopback selftest, the skb is not freed in hns3_clean_tx_ring
or hns3_nic_net_xmit, which causes skb not freed problem.

This patch fixes it by freeing skb when hns3_nic_net_xmit does
not return NETDEV_TX_OK.

Fixes: c39c4d98dc ("net: hns3: Add mac loopback selftest support in hns3 driver")

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:27 +02:00
Yunsheng Lin 03d5cc2806 net: hns3: fix for dereferencing before null checking
[ Upstream commit 757188005f ]

The netdev is dereferenced before null checking in the function
hns3_setup_tc.

This patch moves the dereferencing after the null checking.

Fixes: 76ad4f0ee7 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:27 +02:00
Michal Kalderon e2a7aa231b qed: iWARP - Fix tc for MPA ll2 connection
[ Upstream commit cb94d52b93 ]

The driver needs to assign a lossless traffic class for the MPA ll2
connection to ensure no packets are dropped when returning from the
driver as they will never be re-transmitted by the peer.

Fixes: ae3488ff37 ("qed: Add ll2 connection for processing unaligned MPA packets")
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:26 +02:00
Aaron Lewis 2826cc1782 x86/cpufeatures: Add FDP_EXCPTN_ONLY and ZERO_FCS_FDS
[ Upstream commit cbb99c0f58 ]

Add the CPUID enumeration for Intel's de-feature bits to accommodate
passing these de-features through to kvm guests.

These de-features are (from SDM vol 1, section 8.1.8):
 - X86_FEATURE_FDP_EXCPTN_ONLY: If CPUID.(EAX=07H,ECX=0H):EBX[bit 6] = 1, the
   data pointer (FDP) is updated only for the x87 non-control instructions that
   incur unmasked x87 exceptions.
 - X86_FEATURE_ZERO_FCS_FDS: If CPUID.(EAX=07H,ECX=0H):EBX[bit 13] = 1, the
   processor deprecates FCS and FDS; it saves each as 0000H.

Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jim Mattson <jmattson@google.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: marcorr@google.com
Cc: Peter Feiner <pfeiner@google.com>
Cc: pshier@google.com
Cc: Robert Hoo <robert.hu@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Lendacky <Thomas.Lendacky@amd.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190605220252.103406-1-aaronlewis@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:26 +02:00
Rajneesh Bhardwaj 412121857f perf/x86: Add Intel Ice Lake NNPI uncore support
[ Upstream commit 5f4318c1b1 ]

Intel Ice Lake uncore support already included IMC PCI ID but ICL-NNPI
CPUID is missing so add it to fix the probe function.

Fixes: e39875d15ad6 ("perf/x86: add Intel Icelake uncore support")
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: alexander.shishkin@linux.intel.com
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Linux PM <linux-pm@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190614081701.13828-1-rajneesh.bhardwaj@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:26 +02:00
Waiman Long 865dcf44bd rcu: Force inlining of rcu_read_lock()
[ Upstream commit 6da9f77517 ]

When debugging options are turned on, the rcu_read_lock() function
might not be inlined. This results in lockdep's print_lock() function
printing "rcu_read_lock+0x0/0x70" instead of rcu_read_lock()'s caller.
For example:

[   10.579995] =============================
[   10.584033] WARNING: suspicious RCU usage
[   10.588074] 4.18.0.memcg_v2+ #1 Not tainted
[   10.593162] -----------------------------
[   10.597203] include/linux/rcupdate.h:281 Illegal context switch in
RCU read-side critical section!
[   10.606220]
[   10.606220] other info that might help us debug this:
[   10.606220]
[   10.614280]
[   10.614280] rcu_scheduler_active = 2, debug_locks = 1
[   10.620853] 3 locks held by systemd/1:
[   10.624632]  #0: (____ptrval____) (&type->i_mutex_dir_key#5){.+.+}, at: lookup_slow+0x42/0x70
[   10.633232]  #1: (____ptrval____) (rcu_read_lock){....}, at: rcu_read_lock+0x0/0x70
[   10.640954]  #2: (____ptrval____) (rcu_read_lock){....}, at: rcu_read_lock+0x0/0x70

These "rcu_read_lock+0x0/0x70" strings are not providing any useful
information.  This commit therefore forces inlining of the rcu_read_lock()
function so that rcu_read_lock()'s caller is instead shown.

Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:26 +02:00
Jerome Brunet e05a270a70 ASoC: meson: axg-tdm: fix sample clock inversion
[ Upstream commit cb36ff785e ]

The content of SND_SOC_DAIFMT_FORMAT_MASK is a number, not a bitfield,
so the test to check if the format is i2s is wrong. Because of this the
clock setting may be wrong. For example, the sample clock gets inverted
in DSP B mode, when it should not.

Fix the lrclk invert helper function

Fixes: 1a11d88f49 ("ASoC: meson: add tdm formatter base driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:26 +02:00
Rajneesh Bhardwaj 80e7814124 x86/cpu: Add Ice Lake NNPI to Intel family
[ Upstream commit e32d045cd4 ]

Add the CPUID model number of Ice Lake Neural Network Processor for Deep
Learning Inference (ICL-NNPI) to the Intel family list. Ice Lake NNPI uses
model number 0x9D and this will be documented in a future version of Intel
Software Development Manual.

Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@suse.de
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: platform-driver-x86@vger.kernel.org
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Linux PM <linux-pm@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190606012419.13250-1-rajneesh.bhardwaj@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:26 +02:00
Eric Biggers d349f0ecd7 crypto: testmgr - add some more preemption points
[ Upstream commit e63e1b0dd0 ]

Call cond_resched() after each fuzz test iteration.  This avoids stall
warnings if fuzz_iterations is set very high for testing purposes.

While we're at it, also call cond_resched() after finishing testing each
test vector.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:26 +02:00
Ondrej Mosnacek 09b9995f12 selinux: fix empty write to keycreate file
[ Upstream commit 464c258aa4 ]

When sid == 0 (we are resetting keycreate_sid to the default value), we
should skip the KEY__CREATE check.

Before this patch, doing a zero-sized write to /proc/self/keycreate
would check if the current task can create unlabeled keys (which would
usually fail with -EACCESS and generate an AVC). Now it skips the check
and correctly sets the task's keycreate_sid to 0.

Bug report: https://bugzilla.redhat.com/show_bug.cgi?id=1719067

Tested using the reproducer from the report above.

Fixes: 4eb582cf1f ("[PATCH] keys: add a way to store the appropriate context for newly-created keys")
Reported-by: Kir Kolyshkin <kir@sacred.ru>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:25 +02:00
Marek Szyprowski 4cb2edfa24 media: s5p-mfc: fix reading min scratch buffer size on MFC v6/v7
[ Upstream commit be22203aec ]

MFC v6 and v7 has no register to read min scratch buffer size, so it has
to be read conditionally only if hardware supports it. This fixes following
NULL pointer exception on SoCs with MFC v6/v7:

8<--- cut here ---
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = f25837f9
[00000000] *pgd=bd93d835
Internal error: Oops: 17 [#1] PREEMPT SMP ARM
Modules linked in: btmrvl_sdio btmrvl bluetooth mwifiex_sdio mwifiex ecdh_generic ecc
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
PC is at s5p_mfc_get_min_scratch_buf_size+0x30/0x3c
LR is at s5p_mfc_get_min_scratch_buf_size+0x28/0x3c
...
[<c074f998>] (s5p_mfc_get_min_scratch_buf_size) from [<c0745bc0>] (s5p_mfc_irq+0x814/0xa5c)
[<c0745bc0>] (s5p_mfc_irq) from [<c019a218>] (__handle_irq_event_percpu+0x64/0x3f8)
[<c019a218>] (__handle_irq_event_percpu) from [<c019a5d8>] (handle_irq_event_percpu+0x2c/0x7c)
[<c019a5d8>] (handle_irq_event_percpu) from [<c019a660>] (handle_irq_event+0x38/0x5c)
[<c019a660>] (handle_irq_event) from [<c019ebc4>] (handle_fasteoi_irq+0xc4/0x180)
[<c019ebc4>] (handle_fasteoi_irq) from [<c0199270>] (generic_handle_irq+0x24/0x34)
[<c0199270>] (generic_handle_irq) from [<c0199888>] (__handle_domain_irq+0x7c/0xec)
[<c0199888>] (__handle_domain_irq) from [<c04ac298>] (gic_handle_irq+0x58/0x9c)
[<c04ac298>] (gic_handle_irq) from [<c0101ab0>] (__irq_svc+0x70/0xb0)
Exception stack(0xe73ddc60 to 0xe73ddca8)
...
[<c0101ab0>] (__irq_svc) from [<c01967d8>] (console_unlock+0x5a8/0x6a8)
[<c01967d8>] (console_unlock) from [<c01981d0>] (vprintk_emit+0x118/0x2d8)
[<c01981d0>] (vprintk_emit) from [<c01983b0>] (vprintk_default+0x20/0x28)
[<c01983b0>] (vprintk_default) from [<c01989b4>] (printk+0x30/0x54)
[<c01989b4>] (printk) from [<c07500b8>] (s5p_mfc_init_decode_v6+0x1d4/0x284)
[<c07500b8>] (s5p_mfc_init_decode_v6) from [<c07230d0>] (vb2_start_streaming+0x24/0x150)
[<c07230d0>] (vb2_start_streaming) from [<c0724e4c>] (vb2_core_streamon+0x11c/0x15c)
[<c0724e4c>] (vb2_core_streamon) from [<c07478b8>] (vidioc_streamon+0x64/0xa0)
[<c07478b8>] (vidioc_streamon) from [<c0709640>] (__video_do_ioctl+0x28c/0x45c)
[<c0709640>] (__video_do_ioctl) from [<c0709bc8>] (video_usercopy+0x260/0x8a4)
[<c0709bc8>] (video_usercopy) from [<c02b3820>] (do_vfs_ioctl+0xb0/0x9fc)
[<c02b3820>] (do_vfs_ioctl) from [<c02b41a0>] (ksys_ioctl+0x34/0x58)
[<c02b41a0>] (ksys_ioctl) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
Exception stack(0xe73ddfa8 to 0xe73ddff0)
...
---[ end trace 376cf5ba6e0bee93 ]---

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:25 +02:00
Valdis Klētnieks e6164c5cf3 bpf: silence warning messages in core
[ Upstream commit aee450cbe4 ]

Compiling kernel/bpf/core.c with W=1 causes a flood of warnings:

kernel/bpf/core.c:1198:65: warning: initialized field overwritten [-Woverride-init]
 1198 | #define BPF_INSN_3_TBL(x, y, z) [BPF_##x | BPF_##y | BPF_##z] = true
      |                                                                 ^~~~
kernel/bpf/core.c:1087:2: note: in expansion of macro 'BPF_INSN_3_TBL'
 1087 |  INSN_3(ALU, ADD,  X),   \
      |  ^~~~~~
kernel/bpf/core.c:1202:3: note: in expansion of macro 'BPF_INSN_MAP'
 1202 |   BPF_INSN_MAP(BPF_INSN_2_TBL, BPF_INSN_3_TBL),
      |   ^~~~~~~~~~~~
kernel/bpf/core.c:1198:65: note: (near initialization for 'public_insntable[12]')
 1198 | #define BPF_INSN_3_TBL(x, y, z) [BPF_##x | BPF_##y | BPF_##z] = true
      |                                                                 ^~~~
kernel/bpf/core.c:1087:2: note: in expansion of macro 'BPF_INSN_3_TBL'
 1087 |  INSN_3(ALU, ADD,  X),   \
      |  ^~~~~~
kernel/bpf/core.c:1202:3: note: in expansion of macro 'BPF_INSN_MAP'
 1202 |   BPF_INSN_MAP(BPF_INSN_2_TBL, BPF_INSN_3_TBL),
      |   ^~~~~~~~~~~~

98 copies of the above.

The attached patch silences the warnings, because we *know* we're overwriting
the default initializer. That leaves bpf/core.c with only 6 other warnings,
which become more visible in comparison.

Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:25 +02:00
Young Xiao 9ee7f7b3be media: davinci: vpif_capture: fix memory leak in vpif_probe()
[ Upstream commit 64f883cd98 ]

If vpif_probe() fails on v4l2_device_register() and vpif_probe_complete(),
then memory allocated at initialize_vpif() for global vpif_obj.dev[i]
become unreleased.

The patch adds deallocation of vpif_obj.dev[i] on the error path.

Signed-off-by: Young Xiao <92siuyang@gmail.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:25 +02:00
Tony Lindgren 36dd2bcba5 gpio: omap: Fix lost edge wake-up interrupts
[ Upstream commit a522f1d0c3 ]

If an edge interrupt triggers while entering idle just before we save
GPIO datain register to saved_datain, the triggered GPIO will not be
noticed on wake-up. This is because the saved_datain and GPIO datain
are the same on wake-up in omap_gpio_unidle(). Let's fix this by
ignoring any pending edge interrupts for saved_datain.

This issue affects only idle states where the GPIO module internal
wake-up path is operational. For deeper idle states where the GPIO
module gets powered off, Linux generic wakeirqs must be used for
the padconf wake-up events with pinctrl-single driver. For examples,
please see "interrupts-extended" dts usage in many drivers.

This issue can be somewhat easily reproduced by pinging an idle system
with smsc911x Ethernet interface configured IRQ_TYPE_EDGE_FALLING. At
some point the smsc911x interrupts will just stop triggering. Also if
WLCORE WLAN is used with EDGE interrupt like it's documentation specifies,
we can see lost interrupts without this patch.

Note that in the long run we may be able to cancel entering idle by
returning an error in gpio_omap_cpu_notifier() on pending interrupts.
But let's fix the bug first.

Also note that because of the recent clean-up efforts this patch does
not apply directly to older kernels. This does fix a long term issue
though, and can be backported as needed.

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:25 +02:00
Srinivas Kandagatla 4651fcc683 regmap: fix bulk writes on paged registers
[ Upstream commit db057679de ]

On buses like SlimBus and SoundWire which does not support
gather_writes yet in regmap, A bulk write on paged register
would be silently ignored after programming page.
This is because local variable 'ret' value in regmap_raw_write_impl()
gets reset to 0 once page register is written successfully and the
code below checks for 'ret' value to be -ENOTSUPP before linearising
the write buffer to send to bus->write().

Fix this by resetting the 'ret' value to -ENOTSUPP in cases where
gather_writes() is not supported or single register write is
not possible.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:25 +02:00
Russell King 4bd220bd99 gpio: omap: ensure irq is enabled before wakeup
[ Upstream commit c859e0d479 ]

Documentation states:

  NOTE: There must be a correlation between the wake-up enable and
  interrupt-enable registers. If a GPIO pin has a wake-up configured
  on it, it must also have the corresponding interrupt enabled (on
  one of the two interrupt lines).

Ensure that this condition is always satisfied by enabling the detection
events after enabling the interrupt, and disabling the detection before
disabling the interrupt.  This ensures interrupt/wakeup events can not
happen until both the wakeup and interrupt enables correlate.

If we do any clearing, clear between the interrupt enable/disable and
trigger setting.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:25 +02:00
Russell King 8bc9c0dadb gpio: omap: fix lack of irqstatus_raw0 for OMAP4
[ Upstream commit 64ea3e9094 ]

Commit 384ebe1c28 ("gpio/omap: Add DT support to GPIO driver") added
the register definition tables to the gpio-omap driver. Subsequently to
that commit, commit 4e962e8998 ("gpio/omap: remove cpu_is_omapxxxx()
checks from *_runtime_resume()") added definitions for irqstatus_raw*
registers to the legacy OMAP4 definitions, but missed the DT
definitions.

This causes an unintentional change of behaviour for the 1.101 errata
workaround on OMAP4 platforms. Fix this oversight.

Fixes: 4e962e8998 ("gpio/omap: remove cpu_is_omapxxxx() checks from *_runtime_resume()")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:24 +02:00
Eric Auger 725fb01853 iommu: Fix a leak in iommu_insert_resv_region
[ Upstream commit ad0834deda ]

In case we expand an existing region, we unlink
this latter and insert the larger one. In
that case we should free the original region after
the insertion. Also we can immediately return.

Fixes: 6c65fb318e ("iommu: iommu_get_group_resv_regions")

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:24 +02:00
Kieran Bingham 0a1c9f326f media: fdp1: Support M3N and E3 platforms
[ Upstream commit 4e8c120de9 ]

New Gen3 R-Car platforms incorporate the FDP1 with an updated version
register. No code change is required to support these targets, but they
will currently report an error stating that the device can not be
identified.

Update the driver to match against the new device types.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:24 +02:00
Oliver Neukum b3a2e4cf4e media: uvcvideo: Fix access to uninitialized fields on probe error
[ Upstream commit 11a087f484 ]

We need to check whether this work we are canceling actually is
initialized.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-by: syzbot+2e1ef9188251d9cc7944@syzkaller.appspotmail.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:24 +02:00
Xingyu Chen 16e0870704 irqchip/meson-gpio: Add support for Meson-G12A SoC
[ Upstream commit c64a9e804c ]

The Meson-G12A SoC uses the same GPIO interrupt controller IP block as the
other Meson SoCs, A totle of 100 pins can be spied on, which is the sum of:

- 223:100 undefined (no interrupt)
- 99:97   3 pins on bank GPIOE
- 96:77   20 pins on bank GPIOX
- 76:61   16 pins on bank GPIOA
- 60:53   8 pins on bank GPIOC
- 52:37   16 pins on bank BOOT
- 36:28   9 pins on bank GPIOH
- 27:12   16 pins on bank GPIOZ
- 11:0    12 pins in the AO domain

Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:24 +02:00
Hechao Li 833ead6341 selftests/bpf : clean up feature/ when make clean
[ Upstream commit 89cceaa939 ]

An error "implicit declaration of function 'reallocarray'" can be thrown
with the following steps:

$ cd tools/testing/selftests/bpf
$ make clean && make CC=<Path to GCC 4.8.5>
$ make clean && make CC=<Path to GCC 7.x>

The cause is that the feature folder generated by GCC 4.8.5 is not
removed, leaving feature-reallocarray being 1, which causes reallocarray
not defined when re-compliing with GCC 7.x. This diff adds feature
folder to EXTRA_CLEAN to avoid this problem.

v2: Rephrase the commit message.

Signed-off-by: Hechao Li <hechaol@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:24 +02:00
Thomas Richter 5cd8950672 perf report: Fix OOM error in TUI mode on s390
[ Upstream commit 8a07aa4e9b ]

Debugging a OOM error using the TUI interface revealed this issue
on s390:

[tmricht@m83lp54 perf]$ cat /proc/kallsyms |sort
....
00000001119b7158 B radix_tree_node_cachep
00000001119b8000 B __bss_stop
00000001119b8000 B _end
000003ff80002850 t autofs_mount	[autofs4]
000003ff80002868 t autofs_show_options	[autofs4]
000003ff80002a98 t autofs_evict_inode	[autofs4]
....

There is a huge gap between the last kernel symbol
__bss_stop/_end and the first kernel module symbol
autofs_mount (from autofs4 module).

After reading the kernel symbol table via functions:

 dso__load()
 +--> dso__load_kernel_sym()
      +--> dso__load_kallsyms()
	   +--> __dso_load_kallsyms()
	        +--> symbols__fixup_end()

the symbol __bss_stop has a start address of 1119b8000 and
an end address of 3ff80002850, as can be seen by this debug statement:

  symbols__fixup_end __bss_stop start:0x1119b8000 end:0x3ff80002850

The size of symbol __bss_stop is 0x3fe6e64a850 bytes!
It is the last kernel symbol and fills up the space until
the first kernel module symbol.

This size kills the TUI interface when executing the following
code:

  process_sample_event()
    hist_entry_iter__add()
      hist_iter__report_callback()
        hist_entry__inc_addr_samples()
          symbol__inc_addr_samples(symbol = __bss_stop)
            symbol__cycles_hist()
               annotated_source__alloc_histograms(...,
				                symbol__size(sym),
		                                ...)

This function allocates memory to save sample histograms.
The symbol_size() marco is defined as sym->end - sym->start, which
results in above value of 0x3fe6e64a850 bytes and
the call to calloc() in annotated_source__alloc_histograms() fails.

The histgram memory allocation might fail, make this failure
no-fatal and continue processing.

Output before:
[tmricht@m83lp54 perf]$ ./perf --debug stderr=1 report -vvvvv \
					      -i ~/slow.data 2>/tmp/2
[tmricht@m83lp54 perf]$ tail -5 /tmp/2
  __symbol__inc_addr_samples(875): ENOMEM! sym->name=__bss_stop,
		start=0x1119b8000, addr=0x2aa0005eb08, end=0x3ff80002850,
		func: 0
problem adding hist entry, skipping event
0x938b8 [0x8]: failed to process type: 68 [Cannot allocate memory]
[tmricht@m83lp54 perf]$

Output after:
[tmricht@m83lp54 perf]$ ./perf --debug stderr=1 report -vvvvv \
					      -i ~/slow.data 2>/tmp/2
[tmricht@m83lp54 perf]$ tail -5 /tmp/2
   symbol__inc_addr_samples map:0x1597830 start:0x110730000 end:0x3ff80002850
   symbol__hists notes->src:0x2aa2a70 nr_hists:1
   symbol__inc_addr_samples sym:unlink_anon_vmas src:0x2aa2a70
   __symbol__inc_addr_samples: addr=0x11094c69e
   0x11094c670 unlink_anon_vmas: period++ [addr: 0x11094c69e, 0x2e, evidx=0]
   	=> nr_samples: 1, period: 526008
[tmricht@m83lp54 perf]$

There is no error about failed memory allocation and the TUI interface
shows all entries.

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/90cb5607-3e12-5167-682d-978eba7dafa8@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:24 +02:00
Thomas Richter 9f13cb2d58 perf test 6: Fix missing kvm module load for s390
[ Upstream commit 53fe307dfd ]

Command

   # perf test -Fv 6

fails with error

   running test 100 'kvm-s390:kvm_s390_create_vm' failed to parse
    event 'kvm-s390:kvm_s390_create_vm', err -1, str 'unknown tracepoint'
    event syntax error: 'kvm-s390:kvm_s390_create_vm'
                         \___ unknown tracepoint

when the kvm module is not loaded or not built in.

Fix this by adding a valid function which tests if the module
is loaded. Loaded modules (or builtin KVM support) have a
directory named
  /sys/kernel/debug/tracing/events/kvm-s390
for this tracepoint.

Check for existence of this directory.

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20190604053504.43073-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:23 +02:00
Mathieu Poirier e70d9ff97a perf cs-etm: Properly set the value of 'old' and 'head' in snapshot mode
[ Upstream commit e45c48a9a4 ]

This patch adds the necessary intelligence to properly compute the value
of 'old' and 'head' when operating in snapshot mode.  That way we can
get the latest information in the AUX buffer and be compatible with the
generic AUX ring buffer mechanic.

Tester notes:

> Leo, have you had the chance to test/review this one? Suzuki?

Sure.  I applied this patch on the perf/core branch (with latest
commit 3e4fbf36c1e3 'perf augmented_raw_syscalls: Move reading
filename to the loop') and passed testing with below steps:

  # perf record -e cs_etm/@tmc_etr0/ -S -m,64 --per-thread ./sort &
  [1] 19097
  Bubble sorting array of 30000 elements

  # kill -USR2 19097
  # kill -USR2 19097
  # kill -USR2 19097
  [ perf record: Woken up 4 times to write data ]
  [ perf record: Captured and wrote 0.753 MB perf.data ]

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190605161633.12245-1-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:23 +02:00
Stefano Brivio 20d293588c ipset: Fix memory accounting for hash types on resize
[ Upstream commit 11921796f4 ]

If a fresh array block is allocated during resize, the current in-memory
set size should be increased by the size of the block, not replaced by it.

Before the fix, adding entries to a hash set type, leading to a table
resize, caused an inconsistent memory size to be reported. This becomes
more obvious when swapping sets with similar sizes:

  # cat hash_ip_size.sh
  #!/bin/sh
  FAIL_RETRIES=10

  tries=0
  while [ ${tries} -lt ${FAIL_RETRIES} ]; do
  	ipset create t1 hash:ip
  	for i in `seq 1 4345`; do
  		ipset add t1 1.2.$((i / 255)).$((i % 255))
  	done
  	t1_init="$(ipset list t1|sed -n 's/Size in memory: \(.*\)/\1/p')"

  	ipset create t2 hash:ip
  	for i in `seq 1 4360`; do
  		ipset add t2 1.2.$((i / 255)).$((i % 255))
  	done
  	t2_init="$(ipset list t2|sed -n 's/Size in memory: \(.*\)/\1/p')"

  	ipset swap t1 t2
  	t1_swap="$(ipset list t1|sed -n 's/Size in memory: \(.*\)/\1/p')"
  	t2_swap="$(ipset list t2|sed -n 's/Size in memory: \(.*\)/\1/p')"

  	ipset destroy t1
  	ipset destroy t2
  	tries=$((tries + 1))

  	if [ ${t1_init} -lt 10000 ] || [ ${t2_init} -lt 10000 ]; then
  		echo "FAIL after ${tries} tries:"
  		echo "T1 size ${t1_init}, after swap ${t1_swap}"
  		echo "T2 size ${t2_init}, after swap ${t2_swap}"
  		exit 1
  	fi
  done
  echo "PASS"
  # echo -n 'func hash_ip4_resize +p' > /sys/kernel/debug/dynamic_debug/control
  # ./hash_ip_size.sh
  [ 2035.018673] attempt to resize set t1 from 10 to 11, t 00000000fe6551fa
  [ 2035.078583] set t1 resized from 10 (00000000fe6551fa) to 11 (00000000172a0163)
  [ 2035.080353] Table destroy by resize 00000000fe6551fa
  FAIL after 4 tries:
  T1 size 9064, after swap 71128
  T2 size 71128, after swap 9064

Reported-by: NOYB <JunkYardMail1@Frontier.com>
Fixes: 9e41f26a50 ("netfilter: ipset: Count non-static extension memory for userspace")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:23 +02:00
Aditya Pakki acce347db8 netfilter: ipset: fix a missing check of nla_parse
[ Upstream commit f4f5748bfe ]

When nla_parse fails, we should not use the results (the first
argument). The fix checks if it fails, and if so, returns its error code
upstream.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:23 +02:00
Robert Hancock 4c48018f78 net: sfp: add mutex to prevent concurrent state checks
[ Upstream commit 2158e856f5 ]

sfp_check_state can potentially be called by both a threaded IRQ handler
and delayed work. If it is concurrently called, it could result in
incorrect state management. Add a st_mutex to protect the state - this
lock gets taken outside of code that checks and handle state changes, and
the existing sm_mutex nests inside of it.

Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:23 +02:00
Borislav Petkov 1277ef7670 RAS/CEC: Fix pfn insertion
[ Upstream commit 6d8e294bf5 ]

When inserting random PFNs for debugging the CEC through
(debugfs)/ras/cec/pfn, depending on the return value of pfn_set(),
multiple values get inserted per a single write.

That is because simple_attr_write() interprets a retval of 0 as
success and claims the whole input. However, pfn_set() returns the
cec_add_elem() value, which, if > 0 and smaller than the whole input
length, makes glibc continue issuing the write syscall until there's
input left:

  pfn_set
  simple_attr_write
  debugfs_attr_write
  full_proxy_write
  vfs_write
  ksys_write
  do_syscall_64
  entry_SYSCALL_64_after_hwframe

leading to those repeated calls.

Return 0 to fix that.

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:23 +02:00
Julian Wiedmann 95d0b4bff4 s390/qdio: handle PENDING state for QEBSM devices
[ Upstream commit 04310324c6 ]

When a CQ-enabled device uses QEBSM for SBAL state inspection,
get_buf_states() can return the PENDING state for an Output Queue.
get_outbound_buffer_frontier() isn't prepared for this, and any PENDING
buffer will permanently stall all further completion processing on this
Queue.

This isn't a concern for non-QEBSM devices, as get_buf_states() for such
devices will manually turn PENDING buffers into EMPTY ones.

Fixes: 104ea556ee ("qdio: support asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:23 +02:00
Robert Hancock 506c6ccedf net: axienet: Fix race condition causing TX hang
[ Upstream commit 7de44285c1 ]

It is possible that the interrupt handler fires and frees up space in
the TX ring in between checking for sufficient TX ring space and
stopping the TX queue in axienet_start_xmit. If this happens, the
queue wake from the interrupt handler will occur before the queue is
stopped, causing a lost wakeup and the adapter's transmit hanging.

To avoid this, after stopping the queue, check again whether there is
sufficient space in the TX ring. If so, wake up the queue again.

Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:22 +02:00
Fabio Estevam cfc2d88848 net: fec: Do not use netdev messages too early
[ Upstream commit a19a058236 ]

When a valid MAC address is not found the current messages
are shown:

fec 2188000.ethernet (unnamed net_device) (uninitialized): Invalid MAC address: 00:00:00:00:00:00
fec 2188000.ethernet (unnamed net_device) (uninitialized): Using random MAC address: aa:9f:25:eb:7e:aa

Since the network device has not been registered at this point, it is better
to use dev_err()/dev_info() instead, which will provide cleaner log
messages like these:

fec 2188000.ethernet: Invalid MAC address: 00:00:00:00:00:00
fec 2188000.ethernet: Using random MAC address: aa:9f:25:eb:7e:aa

Tested on a imx6dl-pico-pi board.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:22 +02:00
Antoine Tenart a5b94181aa crypto: inside-secure - do not rely on the hardware last bit for result descriptors
[ Upstream commit 8933259042 ]

When performing a transformation the hardware is given result
descriptors to save the result data. Those result descriptors are
batched using a 'first' and a 'last' bit. There are cases were more
descriptors than needed are given to the engine, leading to the engine
only using some of them, and not setting the last bit on the last
descriptor we gave. This causes issues were the driver and the hardware
aren't in sync anymore about the number of result descriptors given (as
the driver do not give a pool of descriptor to use for any
transformation, but a pool of descriptors to use *per* transformation).

This patch fixes it by attaching the number of given result descriptors
to the requests, and by using this number instead of the 'last' bit
found on the descriptors to process them.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:22 +02:00
Biao Huang faac7e78c4 net: stmmac: modify default value of tx-frames
[ Upstream commit d2facb4b39 ]

the default value of tx-frames is 25, it's too late when
passing tstamp to stack, then the ptp4l will fail:

ptp4l -i eth0 -f gPTP.cfg -m
ptp4l: selected /dev/ptp0 as PTP clock
ptp4l: port 1: INITIALIZING to LISTENING on INITIALIZE
ptp4l: port 0: INITIALIZING to LISTENING on INITIALIZE
ptp4l: port 1: link up
ptp4l: timed out while polling for tx timestamp
ptp4l: increasing tx_timestamp_timeout may correct this issue,
       but it is likely caused by a driver bug
ptp4l: port 1: send peer delay response failed
ptp4l: port 1: LISTENING to FAULTY on FAULT_DETECTED (FT_UNSPECIFIED)

ptp4l tests pass when changing the tx-frames from 25 to 1 with
ethtool -C option.
It should be fine to set tx-frames default value to 1, so ptp4l will pass
by default.

Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:22 +02:00
Biao Huang 037f641e40 net: stmmac: dwmac4: fix flow control issue
[ Upstream commit ee326fd01e ]

Current dwmac4_flow_ctrl will not clear
GMAC_RX_FLOW_CTRL_RFE/GMAC_RX_FLOW_CTRL_RFE bits,
so MAC hw will keep flow control on although expecting
flow control off by ethtool. Add codes to fix it.

Fixes: 477286b53f ("stmmac: add GMAC4 core support")
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:22 +02:00
Jae Hyun Yoo f5d06ac24d media: aspeed: fix a kernel warning on clk control
[ Upstream commit 9698ed4d4a ]

Video engine clock control can be double disabled and eventually
it causes a kernel warning with stack dump printing out like below:

[  515.540498] ------------[ cut here ]------------
[  515.545174] WARNING: CPU: 0 PID: 1310 at drivers/clk/clk.c:684 clk_core_unprepare+0x13c/0x170
[  515.553806] vclk-gate already unprepared
[  515.557841] CPU: 0 PID: 1310 Comm: obmc-ikvm Tainted: G        W         5.0.6-df66fbc97853fbba90a0bfa44de32f3d5f7602b4 #1
[  515.568973] Hardware name: Generic DT based system
[  515.573777] Backtrace:
[  515.576272] [<80107cdc>] (dump_backtrace) from [<80107f10>] (show_stack+0x20/0x24)
[  515.583930]  r7:803a5614 r6:00000009 r5:00000000 r4:9d88fe1c
[  515.589712] [<80107ef0>] (show_stack) from [<80690184>] (dump_stack+0x20/0x28)
[  515.597053] [<80690164>] (dump_stack) from [<80116044>] (__warn.part.3+0xb4/0xdc)
[  515.604557] [<80115f90>] (__warn.part.3) from [<801160d8>] (warn_slowpath_fmt+0x6c/0x90)
[  515.612734]  r6:000002ac r5:8080befc r4:80a07008
[  515.617463] [<80116070>] (warn_slowpath_fmt) from [<803a5614>] (clk_core_unprepare+0x13c/0x170)
[  515.626167]  r3:8080cdf4 r2:8080bfc0
[  515.629834]  r7:98d682a8 r6:9d8a9200 r5:9e5151a0 r4:97abd620
[  515.635530] [<803a54d8>] (clk_core_unprepare) from [<803a76a4>] (clk_unprepare+0x34/0x3c)
[  515.643812]  r5:9e5151a0 r4:97abd620
[  515.647529] [<803a7670>] (clk_unprepare) from [<804f36ec>] (aspeed_video_off+0x38/0x50)
[  515.655539]  r5:9e5151a0 r4:9e504000
[  515.659242] [<804f36b4>] (aspeed_video_off) from [<804f4358>] (aspeed_video_release+0x90/0x114)
[  515.668036]  r5:9e5044b0 r4:9e504000
[  515.671643] [<804f42c8>] (aspeed_video_release) from [<804d302c>] (v4l2_release+0xd4/0xe8)
[  515.679999]  r7:98d682a8 r6:9d087810 r5:9d8a9200 r4:9e504318
[  515.685695] [<804d2f58>] (v4l2_release) from [<80236454>] (__fput+0x98/0x1c4)
[  515.692914]  r5:9e51b608 r4:9d8a9200
[  515.696597] [<802363bc>] (__fput) from [<802365e8>] (____fput+0x18/0x1c)
[  515.703315]  r9:80a0700c r8:801011e4 r7:00000000 r6:80a64b9c r5:9d8e35a0 r4:9d8e38dc
[  515.711167] [<802365d0>] (____fput) from [<80131ca4>] (task_work_run+0x7c/0xa0)
[  515.718596] [<80131c28>] (task_work_run) from [<80106884>] (do_work_pending+0x4a8/0x578)
[  515.726777]  r7:801011e4 r6:80a07008 r5:9d88ffb0 r4:ffffe000
[  515.732466] [<801063dc>] (do_work_pending) from [<8010106c>] (slow_work_pending+0xc/0x20)
[  515.740727] Exception stack(0x9d88ffb0 to 0x9d88fff8)
[  515.745840] ffa0:                                     00000000 76f18094 00000000 00000000
[  515.754122] ffc0: 00000007 00176778 7eda4c20 00000006 00000000 00000000 48e20fa4 00000000
[  515.762386] ffe0: 00000002 7eda4b08 00000000 48f91efc 80000010 00000007
[  515.769097]  r10:00000000 r9:9d88e000 r8:801011e4 r7:00000006 r6:7eda4c20 r5:00176778
[  515.777006]  r4:00000007
[  515.779558] ---[ end trace 12c04aadef8afbbb ]---
[  515.784176] ------------[ cut here ]------------
[  515.788817] WARNING: CPU: 0 PID: 1310 at drivers/clk/clk.c:825 clk_core_disable+0x18c/0x204
[  515.797161] eclk-gate already disabled
[  515.800916] CPU: 0 PID: 1310 Comm: obmc-ikvm Tainted: G        W         5.0.6-df66fbc97853fbba90a0bfa44de32f3d5f7602b4 #1
[  515.811945] Hardware name: Generic DT based system
[  515.816730] Backtrace:
[  515.819210] [<80107cdc>] (dump_backtrace) from [<80107f10>] (show_stack+0x20/0x24)
[  515.826782]  r7:803a5900 r6:00000009 r5:00000000 r4:9d88fe04
[  515.832454] [<80107ef0>] (show_stack) from [<80690184>] (dump_stack+0x20/0x28)
[  515.839687] [<80690164>] (dump_stack) from [<80116044>] (__warn.part.3+0xb4/0xdc)
[  515.847170] [<80115f90>] (__warn.part.3) from [<801160d8>] (warn_slowpath_fmt+0x6c/0x90)
[  515.855247]  r6:00000339 r5:8080befc r4:80a07008
[  515.859868] [<80116070>] (warn_slowpath_fmt) from [<803a5900>] (clk_core_disable+0x18c/0x204)
[  515.868385]  r3:8080cdd0 r2:8080c00c
[  515.871957]  r7:98d682a8 r6:9d8a9200 r5:97abd560 r4:97abd560
[  515.877615] [<803a5774>] (clk_core_disable) from [<803a59a0>] (clk_core_disable_lock+0x28/0x34)
[  515.886301]  r7:98d682a8 r6:9d8a9200 r5:97abd560 r4:a0000013
[  515.891960] [<803a5978>] (clk_core_disable_lock) from [<803a7714>] (clk_disable+0x2c/0x30)
[  515.900216]  r5:9e5151a0 r4:9e515f60
[  515.903816] [<803a76e8>] (clk_disable) from [<804f36f8>] (aspeed_video_off+0x44/0x50)
[  515.911656] [<804f36b4>] (aspeed_video_off) from [<804f4358>] (aspeed_video_release+0x90/0x114)
[  515.920341]  r5:9e5044b0 r4:9e504000
[  515.923921] [<804f42c8>] (aspeed_video_release) from [<804d302c>] (v4l2_release+0xd4/0xe8)
[  515.932184]  r7:98d682a8 r6:9d087810 r5:9d8a9200 r4:9e504318
[  515.937851] [<804d2f58>] (v4l2_release) from [<80236454>] (__fput+0x98/0x1c4)
[  515.944980]  r5:9e51b608 r4:9d8a9200
[  515.948559] [<802363bc>] (__fput) from [<802365e8>] (____fput+0x18/0x1c)
[  515.955257]  r9:80a0700c r8:801011e4 r7:00000000 r6:80a64b9c r5:9d8e35a0 r4:9d8e38dc
[  515.963008] [<802365d0>] (____fput) from [<80131ca4>] (task_work_run+0x7c/0xa0)
[  515.970333] [<80131c28>] (task_work_run) from [<80106884>] (do_work_pending+0x4a8/0x578)
[  515.978421]  r7:801011e4 r6:80a07008 r5:9d88ffb0 r4:ffffe000
[  515.984086] [<801063dc>] (do_work_pending) from [<8010106c>] (slow_work_pending+0xc/0x20)
[  515.992247] Exception stack(0x9d88ffb0 to 0x9d88fff8)
[  515.997296] ffa0:                                     00000000 76f18094 00000000 00000000
[  516.005473] ffc0: 00000007 00176778 7eda4c20 00000006 00000000 00000000 48e20fa4 00000000
[  516.013642] ffe0: 00000002 7eda4b08 00000000 48f91efc 80000010 00000007
[  516.020257]  r10:00000000 r9:9d88e000 r8:801011e4 r7:00000006 r6:7eda4c20 r5:00176778
[  516.028072]  r4:00000007
[  516.030606] ---[ end trace 12c04aadef8afbbc ]---

To prevent this issue, this commit adds clock status checking
logic into the Aspeed video engine driver.

Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:22 +02:00
Jae Hyun Yoo 33f5c9308a media: aspeed: change irq to threaded irq
[ Upstream commit 12ae1c1bf5 ]

Differently from other Aspeed drivers, this driver calls clock
control APIs in interrupt context. Since ECLK is coupled with a
reset bit in clk-aspeed module, aspeed_clk_enable will make 10ms of
busy waiting delay for triggering the reset and it will eventually
disturb other drivers' interrupt handling. To fix this issue, this
commit changes this driver's irq to threaded irq so that the delay
can be happened in a thread context.

Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:21 +02:00
Jiri Olsa cf16cff4c0 perf jvmti: Address gcc string overflow warning for strncpy()
[ Upstream commit 279ab04dbe ]

We are getting false positive gcc warning when we compile with gcc9 (9.1.1):

     CC       jvmti/libjvmti.o
   In file included from /usr/include/string.h:494,
                    from jvmti/libjvmti.c:5:
   In function ‘strncpy’,
       inlined from ‘copy_class_filename.constprop’ at jvmti/libjvmti.c:166:3:
   /usr/include/bits/string_fortified.h:106:10: error: ‘__builtin_strncpy’ specified bound depends on the length of the source argument [-Werror=stringop-overflow=]
     106 |   return __builtin___strncpy_chk (__dest, __src, __len, __bos (__dest));
         |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   jvmti/libjvmti.c: In function ‘copy_class_filename.constprop’:
   jvmti/libjvmti.c:165:26: note: length computed here
     165 |   size_t file_name_len = strlen(file_name);
         |                          ^~~~~~~~~~~~~~~~~
   cc1: all warnings being treated as errors

As per Arnaldo's suggestion use strlcpy(), which does the same thing and keeps
gcc silent.

Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190531131321.GB1281@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:21 +02:00
Fabio Estevam bdfd587ab3 media: imx7-mipi-csis: Propagate the error if clock enabling fails
[ Upstream commit 2b393f91c6 ]

Currently the return value from clk_bulk_prepare_enable() is checked,
but it is not propagate it in the case of failure.

Fix it and also move the error message to the caller of
mipi_csis_clk_enable().

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:21 +02:00
Miles Chen 694bc18a64 arm64: mm: make CONFIG_ZONE_DMA32 configurable
[ Upstream commit 0c1f14ed12 ]

This change makes CONFIG_ZONE_DMA32 defuly y and allows users
to overwrite it only when CONFIG_EXPERT=y.

For the SoCs that do not need CONFIG_ZONE_DMA32, this is the
first step to manage all available memory by a single
zone(normal zone) to reduce the overhead of multiple zones.

The change also fixes a build error when CONFIG_NUMA=y and
CONFIG_ZONE_DMA32=n.

arch/arm64/mm/init.c:195:17: error: use of undeclared identifier 'ZONE_DMA32'
                max_zone_pfns[ZONE_DMA32] = PFN_DOWN(max_zone_dma_phys());

Change since v1:
1. only expose CONFIG_ZONE_DMA32 when CONFIG_EXPERT=y
2. remove redundant IS_ENABLED(CONFIG_ZONE_DMA32)

Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:21 +02:00
Abhishek Goel 4d5a27a47a cpupower : frequency-set -r option misses the last cpu in related cpu list
[ Upstream commit 04507c0a93 ]

To set frequency on specific cpus using cpupower, following syntax can
be used :
cpupower -c #i frequency-set -f #f -r

While setting frequency using cpupower frequency-set command, if we use
'-r' option, it is expected to set frequency for all cpus related to
cpu #i. But it is observed to be missing the last cpu in related cpu
list. This patch fixes the problem.

Signed-off-by: Abhishek Goel <huntbag@linux.vnet.ibm.com>
Reviewed-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:21 +02:00
Weihang Li 852b5e1fa7 net: hns3: set ops to null when unregister ad_dev
[ Upstream commit 594a81b395 ]

The hclge/hclgevf and hns3 module can be unloaded independently,
when hclge/hclgevf unloaded firstly, the ops of ae_dev should
be set to NULL, otherwise it will cause an use-after-free problem.

Fixes: 38caee9d3e ("net: hns3: Add support of the HNAE3 framework")
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:21 +02:00
Weihang Li 44f7be43d1 net: hns3: add a check to pointer in error_detected and slot_reset
[ Upstream commit 661262bc3e ]

If we add a VF without loading hclgevf.ko and then there is a RAS error
occurs, PCIe AER will call error_detected and slot_reset of all functions,
and will get a NULL pointer when we check ad_dev->ops->handle_hw_ras_error.
This will cause a call trace and failures on handling of follow-up RAS
errors.

This patch check ae_dev and ad_dev->ops at first to solve above issues.

Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:20 +02:00
Kefeng Wang 8d9765e899 media: wl128x: Fix some error handling in fm_v4l2_init_video_device()
[ Upstream commit 69fbb3f473 ]

X-Originating-IP: [10.175.113.25]
X-CFilter-Loop: Reflected
The fm_v4l2_init_video_device() forget to unregister v4l2/video device
in the error path, it could lead to UAF issue, eg,

  BUG: KASAN: use-after-free in atomic64_read include/asm-generic/atomic-instrumented.h:836 [inline]
  BUG: KASAN: use-after-free in atomic_long_read include/asm-generic/atomic-long.h:28 [inline]
  BUG: KASAN: use-after-free in __mutex_unlock_slowpath+0x92/0x690 kernel/locking/mutex.c:1206
  Read of size 8 at addr ffff8881e84a7c70 by task v4l_id/3659

  CPU: 1 PID: 3659 Comm: v4l_id Not tainted 5.1.0 #8
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
  Call Trace:
   __dump_stack lib/dump_stack.c:77 [inline]
   dump_stack+0xa9/0x10e lib/dump_stack.c:113
   print_address_description+0x65/0x270 mm/kasan/report.c:187
   kasan_report+0x149/0x18d mm/kasan/report.c:317
   atomic64_read include/asm-generic/atomic-instrumented.h:836 [inline]
   atomic_long_read include/asm-generic/atomic-long.h:28 [inline]
   __mutex_unlock_slowpath+0x92/0x690 kernel/locking/mutex.c:1206
   fm_v4l2_fops_open+0xac/0x120 [fm_drv]
   v4l2_open+0x191/0x390 [videodev]
   chrdev_open+0x20d/0x570 fs/char_dev.c:417
   do_dentry_open+0x700/0xf30 fs/open.c:777
   do_last fs/namei.c:3416 [inline]
   path_openat+0x7c4/0x2a90 fs/namei.c:3532
   do_filp_open+0x1a5/0x2b0 fs/namei.c:3563
   do_sys_open+0x302/0x490 fs/open.c:1069
   do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290
   entry_SYSCALL_64_after_hwframe+0x49/0xbe
  RIP: 0033:0x7f8180c17c8e
  ...
  Allocated by task 3642:
   set_track mm/kasan/common.c:87 [inline]
   __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:497
   fm_drv_init+0x13/0x1000 [fm_drv]
   do_one_initcall+0xbc/0x47d init/main.c:901
   do_init_module+0x1b5/0x547 kernel/module.c:3456
   load_module+0x6405/0x8c10 kernel/module.c:3804
   __do_sys_finit_module+0x162/0x190 kernel/module.c:3898
   do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

  Freed by task 3642:
   set_track mm/kasan/common.c:87 [inline]
   __kasan_slab_free+0x130/0x180 mm/kasan/common.c:459
   slab_free_hook mm/slub.c:1429 [inline]
   slab_free_freelist_hook mm/slub.c:1456 [inline]
   slab_free mm/slub.c:3003 [inline]
   kfree+0xe1/0x270 mm/slub.c:3958
   fm_drv_init+0x1e6/0x1000 [fm_drv]
   do_one_initcall+0xbc/0x47d init/main.c:901
   do_init_module+0x1b5/0x547 kernel/module.c:3456
   load_module+0x6405/0x8c10 kernel/module.c:3804
   __do_sys_finit_module+0x162/0x190 kernel/module.c:3898
   do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

Add relevant unregister functions to fix it.

Cc: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:20 +02:00
Neil Armstrong e8a4563973 media: platform: ao-cec-g12a: disable regmap fast_io for cec bus regmap
[ Upstream commit 9f7406d6b5 ]

With fast_io enabled, spinlock_irq is used for read/write operations,
thus leading to :
BUG: sleeping function called from invalid context at [snip]/ao-cec-g12a.c:379
 in_atomic(): 1, irqs_disabled(): 128, pid: 1451, name: irq/14-ff800280
[snip]
Call trace:
 dump_backtrace+0x0/0x180
 show_stack+0x14/0x1c
 dump_stack+0xa8/0xe0
 ___might_sleep+0xf4/0x104
 __might_sleep+0x4c/0x80
 meson_ao_cec_g12a_read+0x7c/0x164
 regmap_read+0x16c/0x1b0
 meson_ao_cec_g12a_irq_thread+0xcc/0x200
 irq_thread_fn+0x2c/0x60
 irq_thread+0x14c/0x1fc
 kthread+0x11c/0x12c
 ret_from_fork+0x10/0x18

Simply remove fast_io to use mutexes instead.

Fixes: b7778c4668 ("media: platform: meson: Add Amlogic Meson G12A AO CEC Controller driver")

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:20 +02:00
Imre Deak e26b15def4 locking/lockdep: Fix merging of hlocks with non-zero references
[ Upstream commit d9349850e1 ]

The sequence

	static DEFINE_WW_CLASS(test_ww_class);

	struct ww_acquire_ctx ww_ctx;
	struct ww_mutex ww_lock_a;
	struct ww_mutex ww_lock_b;
	struct ww_mutex ww_lock_c;
	struct mutex lock_c;

	ww_acquire_init(&ww_ctx, &test_ww_class);

	ww_mutex_init(&ww_lock_a, &test_ww_class);
	ww_mutex_init(&ww_lock_b, &test_ww_class);
	ww_mutex_init(&ww_lock_c, &test_ww_class);

	mutex_init(&lock_c);

	ww_mutex_lock(&ww_lock_a, &ww_ctx);

	mutex_lock(&lock_c);

	ww_mutex_lock(&ww_lock_b, &ww_ctx);
	ww_mutex_lock(&ww_lock_c, &ww_ctx);

	mutex_unlock(&lock_c);	(*)

	ww_mutex_unlock(&ww_lock_c);
	ww_mutex_unlock(&ww_lock_b);
	ww_mutex_unlock(&ww_lock_a);

	ww_acquire_fini(&ww_ctx); (**)

will trigger the following error in __lock_release() when calling
mutex_release() at **:

	DEBUG_LOCKS_WARN_ON(depth <= 0)

The problem is that the hlock merging happening at * updates the
references for test_ww_class incorrectly to 3 whereas it should've
updated it to 4 (representing all the instances for ww_ctx and
ww_lock_[abc]).

Fix this by updating the references during merging correctly taking into
account that we can have non-zero references (both for the hlock that we
merge into another hlock or for the hlock we are merging into).

Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= <ville.syrjala@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: https://lkml.kernel.org/r/20190524201509.9199-2-imre.deak@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:20 +02:00
Imre Deak 74e248d9f9 locking/lockdep: Fix OOO unlock when hlocks need merging
[ Upstream commit 8c8889d8ea ]

The sequence

	static DEFINE_WW_CLASS(test_ww_class);

	struct ww_acquire_ctx ww_ctx;
	struct ww_mutex ww_lock_a;
	struct ww_mutex ww_lock_b;
	struct mutex lock_c;
	struct mutex lock_d;

	ww_acquire_init(&ww_ctx, &test_ww_class);

	ww_mutex_init(&ww_lock_a, &test_ww_class);
	ww_mutex_init(&ww_lock_b, &test_ww_class);

	mutex_init(&lock_c);

	ww_mutex_lock(&ww_lock_a, &ww_ctx);

	mutex_lock(&lock_c);

	ww_mutex_lock(&ww_lock_b, &ww_ctx);

	mutex_unlock(&lock_c);		(*)

	ww_mutex_unlock(&ww_lock_b);
	ww_mutex_unlock(&ww_lock_a);

	ww_acquire_fini(&ww_ctx);

triggers the following WARN in __lock_release() when doing the unlock at *:

	DEBUG_LOCKS_WARN_ON(curr->lockdep_depth != depth - 1);

The problem is that the WARN check doesn't take into account the merging
of ww_lock_a and ww_lock_b which results in decreasing curr->lockdep_depth
by 2 not only 1.

Note that the following sequence doesn't trigger the WARN, since there
won't be any hlock merging.

	ww_acquire_init(&ww_ctx, &test_ww_class);

	ww_mutex_init(&ww_lock_a, &test_ww_class);
	ww_mutex_init(&ww_lock_b, &test_ww_class);

	mutex_init(&lock_c);
	mutex_init(&lock_d);

	ww_mutex_lock(&ww_lock_a, &ww_ctx);

	mutex_lock(&lock_c);
	mutex_lock(&lock_d);

	ww_mutex_lock(&ww_lock_b, &ww_ctx);

	mutex_unlock(&lock_d);

	ww_mutex_unlock(&ww_lock_b);
	ww_mutex_unlock(&ww_lock_a);

	mutex_unlock(&lock_c);

	ww_acquire_fini(&ww_ctx);

In general both of the above two sequences are valid and shouldn't
trigger any lockdep warning.

Fix this by taking the decrement due to the hlock merging into account
during lock release and hlock class re-setting. Merging can't happen
during lock downgrading since there won't be a new possibility to merge
hlocks in that case, so add a WARN if merging still happens then.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: ville.syrjala@linux.intel.com
Link: https://lkml.kernel.org/r/20190524201509.9199-1-imre.deak@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:20 +02:00
Sven Eckelmann a6091a0b64 batman-adv: Fix duplicated OGMs on NETDEV_UP
[ Upstream commit 9e6b5648bb ]

The state of slave interfaces are handled differently depending on whether
the interface is up or not. All active interfaces (IFF_UP) will transmit
OGMs. But for B.A.T.M.A.N. IV, also non-active interfaces are scheduling
(low TTL) OGMs on active interfaces. The code which setups and schedules
the OGMs must therefore already be called when the interfaces gets added as
slave interface and the transmit function must then check whether it has to
send out the OGM or not on the specific slave interface.

But the commit f0d97253fb ("batman-adv: remove ogm_emit and ogm_schedule
API calls") moved the setup code from the enable function to the activate
function. The latter is called either when the added slave was already up
when batadv_hardif_enable_interface processed the new interface or when a
NETDEV_UP event was received for this slave interfac. As result, each
NETDEV_UP would schedule a new OGM worker for the interface and thus OGMs
would be send a lot more than expected.

Fixes: f0d97253fb ("batman-adv: remove ogm_emit and ogm_schedule API calls")
Reported-by: Linus Lüssing <linus.luessing@c0d3.blue>
Tested-by: Linus Lüssing <linus.luessing@c0d3.blue>
Acked-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:20 +02:00
David S. Miller 1390dacc36 tua6100: Avoid build warnings.
[ Upstream commit 621ccc6cc5 ]

Rename _P to _P_VAL and _R to _R_VAL to avoid global
namespace conflicts:

drivers/media/dvb-frontends/tua6100.c: In function ‘tua6100_set_params’:
drivers/media/dvb-frontends/tua6100.c:79: warning: "_P" redefined
 #define _P 32

In file included from ./include/acpi/platform/aclinux.h:54,
                 from ./include/acpi/platform/acenv.h:152,
                 from ./include/acpi/acpi.h:22,
                 from ./include/linux/acpi.h:34,
                 from ./include/linux/i2c.h:17,
                 from drivers/media/dvb-frontends/tua6100.h:30,
                 from drivers/media/dvb-frontends/tua6100.c:32:
./include/linux/ctype.h:14: note: this is the location of the previous definition
 #define _P 0x10 /* punct */

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:19 +02:00
Christophe Leroy 52265017e3 crypto: talitos - Align SEC1 accesses to 32 bits boundaries.
[ Upstream commit c9cca7034b ]

The MPC885 reference manual states:

SEC Lite-initiated 8xx writes can occur only on 32-bit-word boundaries, but
reads can occur on any byte boundary. Writing back a header read from a
non-32-bit-word boundary will yield unpredictable results.

In order to ensure that, cra_alignmask is set to 3 for SEC1.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 9c4a79653b ("crypto: talitos - Freescale integrated security engine (SEC) driver")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:19 +02:00
Christophe Leroy ed6e14dcb8 crypto: talitos - properly handle split ICV.
[ Upstream commit eae55a586c ]

The driver assumes that the ICV is as a single piece in the last
element of the scatterlist. This assumption is wrong.

This patch ensures that the ICV is properly handled regardless of
the scatterlist layout.

Fixes: 9c4a79653b ("crypto: talitos - Freescale integrated security engine (SEC) driver")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:19 +02:00
Vladimir Oltean d9918f4c0e net: dsa: sja1105: Fix broken fixed-link interfaces on user ports
[ Upstream commit af7cd0366e ]

PHYLIB and PHYLINK handle fixed-link interfaces differently. PHYLIB
wraps them in a software PHY ("pseudo fixed link") phydev construct such
that .adjust_link driver callbacks see an unified API. Whereas PHYLINK
simply creates a phylink_link_state structure and passes it to
.mac_config.

At the time the driver was introduced, DSA was using PHYLIB for the
CPU/cascade ports (the ones with no net devices) and PHYLINK for
everything else.

As explained below:

commit aab9c4067d
Author: Florian Fainelli <f.fainelli@gmail.com>
Date:   Thu May 10 13:17:36 2018 -0700

  net: dsa: Plug in PHYLINK support

  Drivers that utilize fixed links for user-facing ports (e.g: bcm_sf2)
  will need to implement phylink_mac_ops from now on to preserve
  functionality, since PHYLINK *does not* create a phy_device instance
  for fixed links.

In the above patch, DSA guards the .phylink_mac_config callback against
a NULL phydev pointer.  Therefore, .adjust_link is not called in case of
a fixed-link user port.

This patch fixes the situation by converting the driver from using
.adjust_link to .phylink_mac_config.  This can be done now in a unified
fashion for both slave and CPU/cascade ports because DSA now uses
PHYLINK for all ports.

Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:19 +02:00
Ioana Ciornei a977ec5069 net: phy: Check against net_device being NULL
[ Upstream commit 82c76aca81 ]

In general, we don't want MAC drivers calling phy_attach_direct with the
net_device being NULL. Add checks against this in all the functions
calling it: phy_attach() and phy_connect_direct().

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:19 +02:00
Shailendra Verma ba3a612f85 media: staging: media: davinci_vpfe: - Fix for memory leak if decoder initialization fails.
[ Upstream commit 6995a65910 ]

Fix to avoid possible memory leak if the decoder initialization
got failed.Free the allocated memory for file handle object
before return in case decoder initialization fails.

Signed-off-by: Shailendra Verma <shailendra.v@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:19 +02:00
Pierre-Louis Bossart 175955ac85 ASoC: Intel: sof-rt5682: fix undefined references with Baytrail-only support
[ Upstream commit 17fc24875d ]

The sof-rt5682 machine driver supports both legacy Baytrail devices
and more recent ApolloLake/CometLake platforms. When only Baytrail is
selected, the compilation fails with the following errors:

ERROR: "hdac_hdmi_jack_port_init"
[sound/soc/intel/boards/snd-soc-sof_rt5682.ko] undefined!

ERROR: "hdac_hdmi_jack_init"
[sound/soc/intel/boards/snd-soc-sof_rt5682.ko] undefined!

Fix by selecting SND_SOC_HDAC_HDMI unconditionally. The code for HDMI
support is not reachable on Baytrail so this change has no functional
impact.

Fixes: f70abd75b7 ("ASoC: Intel: add sof-rt5682 machine driver")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:18 +02:00
Kefeng Wang fea9869ff4 media: saa7164: fix remove_proc_entry warning
[ Upstream commit 50710eeefb ]

if saa7164_proc_create() fails, saa7164_fini() will trigger a warning,

name 'saa7164'
WARNING: CPU: 1 PID: 6311 at fs/proc/generic.c:672 remove_proc_entry+0x1e8/0x3a0
  ? remove_proc_entry+0x1e8/0x3a0
  ? try_stop_module+0x7b/0x240
  ? proc_readdir+0x70/0x70
  ? rcu_read_lock_sched_held+0xd7/0x100
  saa7164_fini+0x13/0x1f [saa7164]
  __x64_sys_delete_module+0x30c/0x480
  ? __ia32_sys_delete_module+0x480/0x480
  ? __x64_sys_clock_gettime+0x11e/0x1c0
  ? __x64_sys_timer_create+0x1a0/0x1a0
  ? trace_hardirqs_off_caller+0x40/0x180
  ? do_syscall_64+0x18/0x450
  do_syscall_64+0x9f/0x450
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fix it by checking the return of proc_create_single() before
calling remove_proc_entry().

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: use 0444 instead of S_IRUGO]
[hverkuil-cisco@xs4all.nl: use pr_info instead of KERN_INFO]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:18 +02:00
Hans Verkuil 717cba2f10 media: mc-device.c: don't memset __user pointer contents
[ Upstream commit 518fa4e0e0 ]

You can't memset the contents of a __user pointer. Instead, call copy_to_user to
copy links.reserved (which is zeroed) to the user memory.

This fixes this sparse warning:

SPARSE:drivers/media/mc/mc-device.c drivers/media/mc/mc-device.c:521:16:  warning: incorrect type in argument 1 (different address spaces)

Fixes: f49308878d ("media: media_device_enum_links32: clean a reserved field")

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:18 +02:00
Mitch Williams d2bc45756d ice: Check all VFs for MDD activity, don't disable
[ Upstream commit 23c0112246 ]

Don't use the mdd_detected variable as an exit condition for this loop;
the first VF to NOT have an MDD event will cause the loop to terminate.

Instead just look at all of the VFs, but don't disable them. This
prevents proper release of resources if the VFs are rebooted or the VF
driver reloaded. Instead, just log a message and call out repeat
offenders.

To make it clear what we are doing, use a differently-named variable in
the loop.

Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:18 +02:00
Arnaldo Carvalho de Melo ce217d5f6d perf annotate TUI browser: Do not use member from variable within its own initialization
[ Upstream commit da2019633f ]

Some compilers will complain when using a member of a struct to
initialize another member, in the same struct initialization.

For instance:

  debian:8      Debian clang version 3.5.0-10 (tags/RELEASE_350/final) (based on LLVM 3.5.0)
  oraclelinux:7 clang version 3.4.2 (tags/RELEASE_34/dot2-final)

Produce:

  ui/browsers/annotate.c:104:12: error: variable 'ops' is uninitialized when used within its own initialization [-Werror,-Wuninitialized]
                                              (!ops.current_entry ||
                                                ^~~
  1 error generated.

So use an extra variable, initialized just before that struct, to have
the value used in the expressions used to init two of the struct
members.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: c298304bd7 ("perf annotate: Use a ops table for annotation_line__write()")
Link: https://lkml.kernel.org/n/tip-f9nexro58q62l3o9hez8hr0i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:18 +02:00
Vandana BN 702fc0f88d media: usb:zr364xx:Fix KASAN:null-ptr-deref Read in zr364xx_vidioc_querycap
[ Upstream commit 5d2e73a5f8 ]

SyzKaller hit the null pointer deref while reading from uninitialized
udev->product in zr364xx_vidioc_querycap().

==================================================================
BUG: KASAN: null-ptr-deref in read_word_at_a_time+0xe/0x20
include/linux/compiler.h:274
Read of size 1 at addr 0000000000000000 by task v4l_id/5287

CPU: 1 PID: 5287 Comm: v4l_id Not tainted 5.1.0-rc3-319004-g43151d6 #6
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0xe8/0x16e lib/dump_stack.c:113
  kasan_report.cold+0x5/0x3c mm/kasan/report.c:321
  read_word_at_a_time+0xe/0x20 include/linux/compiler.h:274
  strscpy+0x8a/0x280 lib/string.c:207
  zr364xx_vidioc_querycap+0xb5/0x210 drivers/media/usb/zr364xx/zr364xx.c:706
  v4l_querycap+0x12b/0x340 drivers/media/v4l2-core/v4l2-ioctl.c:1062
  __video_do_ioctl+0x5bb/0xb40 drivers/media/v4l2-core/v4l2-ioctl.c:2874
  video_usercopy+0x44e/0xf00 drivers/media/v4l2-core/v4l2-ioctl.c:3056
  v4l2_ioctl+0x14e/0x1a0 drivers/media/v4l2-core/v4l2-dev.c:364
  vfs_ioctl fs/ioctl.c:46 [inline]
  file_ioctl fs/ioctl.c:509 [inline]
  do_vfs_ioctl+0xced/0x12f0 fs/ioctl.c:696
  ksys_ioctl+0xa0/0xc0 fs/ioctl.c:713
  __do_sys_ioctl fs/ioctl.c:720 [inline]
  __se_sys_ioctl fs/ioctl.c:718 [inline]
  __x64_sys_ioctl+0x74/0xb0 fs/ioctl.c:718
  do_syscall_64+0xcf/0x4f0 arch/x86/entry/common.c:290
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f3b56d8b347
Code: 90 90 90 48 8b 05 f1 fa 2a 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff
ff c3 90 90 90 90 90 90 90 90 90 90 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff
ff 73 01 c3 48 8b 0d c1 fa 2a 00 31 d2 48 29 c2 64
RSP: 002b:00007ffe005d5d68 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f3b56d8b347
RDX: 00007ffe005d5d70 RSI: 0000000080685600 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000400884
R13: 00007ffe005d5ec0 R14: 0000000000000000 R15: 0000000000000000
==================================================================

For this device udev->product is not initialized and accessing it causes a NULL pointer deref.

The fix is to check for NULL before strscpy() and copy empty string, if
product is NULL

Reported-by: syzbot+66010012fd4c531a1a96@syzkaller.appspotmail.com
Signed-off-by: Vandana BN <bnvandana@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:18 +02:00
Eric Biggers ef039427b9 fscrypt: clean up some BUG_ON()s in block encryption/decryption
[ Upstream commit eeacfdc68a ]

Replace some BUG_ON()s with WARN_ON_ONCE() and returning an error code,
and move the check for len divisible by FS_CRYPTO_BLOCK_SIZE into
fscrypt_crypt_block() so that it's done for both encryption and
decryption, not just encryption.

Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:17 +02:00
sumitg bb50e4a36b media: v4l2-core: fix use-after-free error
[ Upstream commit 3e0f724346 ]

Fixing use-after-free within __v4l2_ctrl_handler_setup().
Memory is being freed with kfree(new_ref) for duplicate
control reference entry but ctrl->cluster pointer is still
referring to freed duplicate entry resulting in error on
access. Change done to update cluster pointer only when new
control reference is added.

 ==================================================================
 BUG: KASAN: use-after-free in __v4l2_ctrl_handler_setup+0x388/0x428
 Read of size 8 at addr ffffffc324e78618 by task systemd-udevd/312

 Allocated by task 312:

 Freed by task 312:

 The buggy address belongs to the object at ffffffc324e78600
  which belongs to the cache kmalloc-64 of size 64
 The buggy address is located 24 bytes inside of
  64-byte region [ffffffc324e78600, ffffffc324e78640)
 The buggy address belongs to the page:
 page:ffffffbf0c939e00 count:1 mapcount:0 mapping:
					(null) index:0xffffffc324e78f80
 flags: 0x4000000000000100(slab)
 raw: 4000000000000100 0000000000000000 ffffffc324e78f80 000000018020001a
 raw: 0000000000000000 0000000100000001 ffffffc37040fb80 0000000000000000
 page dumped because: kasan: bad access detected

 Memory state around the buggy address:
  ffffffc324e78500: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
  ffffffc324e78580: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
 >ffffffc324e78600: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
                             ^
  ffffffc324e78680: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
  ffffffc324e78700: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc
 ==================================================================

Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:17 +02:00
Kefeng Wang a1b01aeb1d media: vim2m: fix two double-free issues
[ Upstream commit 20059cbbf9 ]

vim2m_device_release() will be called by video_unregister_device() to release
various objects.

There are two double-free issue,
1. dev->m2m_dev will be freed twice in error_m2m path/vim2m_device_release
2. the error_v4l2 and error_free path in vim2m_probe() will release
   same objects, since vim2m_device_release has done.

Fixes: ea6c7e34f3 ("media: vim2m: replace devm_kzalloc by kzalloc")

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:17 +02:00
Anirudh Gupta 185563d3bd xfrm: Fix xfrm sel prefix length validation
[ Upstream commit b38ff4075a ]

Family of src/dst can be different from family of selector src/dst.
Use xfrm selector family to validate address prefix length,
while verifying new sa from userspace.

Validated patch with this command:
ip xfrm state add src 1.1.6.1 dst 1.1.6.2 proto esp spi 4260196 \
reqid 20004 mode tunnel aead "rfc4106(gcm(aes))" \
0x1111016400000000000000000000000044440001 128 \
sel src 1011:1:4::2/128 sel dst 1021:1:4::2/128 dev Port5

Fixes: 07bf790895 ("xfrm: Validate address prefix lengths in the xfrm selector.")
Signed-off-by: Anirudh Gupta <anirudh.gupta@sophos.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:17 +02:00
Jeremy Sowden 9d047322bb af_key: fix leaks in key_pol_get_resp and dump_sp.
[ Upstream commit 7c80eb1c7e ]

In both functions, if pfkey_xfrm_policy2msg failed we leaked the newly
allocated sk_buff.  Free it on error.

Fixes: 55569ce256 ("Fix conversion between IPSEC_MODE_xxx and XFRM_MODE_xxx.")
Reported-by: syzbot+4f0529365f7f2208d9f0@syzkaller.appspotmail.com
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:17 +02:00
Eric W. Biederman 4adddecd46 signal/pid_namespace: Fix reboot_pid_ns to use send_sig not force_sig
[ Upstream commit f9070dc945 ]

The locking in force_sig_info is not prepared to deal with a task that
exits or execs (as sighand may change).  The is not a locking problem
in force_sig as force_sig is only built to handle synchronous
exceptions.

Further the function force_sig_info changes the signal state if the
signal is ignored, or blocked or if SIGNAL_UNKILLABLE will prevent the
delivery of the signal.  The signal SIGKILL can not be ignored and can
not be blocked and SIGNAL_UNKILLABLE won't prevent it from being
delivered.

So using force_sig rather than send_sig for SIGKILL is confusing
and pointless.

Because it won't impact the sending of the signal and and because
using force_sig is wrong, replace force_sig with send_sig.

Cc: Daniel Lezcano <daniel.lezcano@free.fr>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Fixes: cf3f89214e ("pidns: add reboot_pid_ns() to handle the reboot syscall")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:16 +02:00
Michal Kalderon 2343820105 qed: Set the doorbell address correctly
[ Upstream commit 8366d52001 ]

In 100g mode the doorbell bar is united for both engines. Set
the correct offset in the hwfn so that the doorbell returned
for RoCE is in the affined hwfn.

Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Denis Bolotin <denis.bolotin@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:16 +02:00
Jian Shen 0fe85abd22 net: hns3: fix for FEC configuration
[ Upstream commit f438bfe9d4 ]

The FEC capbility may be changed with port speed changes. Driver
needs to read the active FEC mode, and update FEC capability
when port speed changes.

Fixes: 7e6ec9148a ("net: hns3: add support for FEC encoding control")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:16 +02:00
Jian Shen ff081970a4 net: hns3: initialize CPU reverse mapping
[ Upstream commit ffab9691bc ]

Allocate CPU rmap and add entry for each irq. CPU rmap is
used in aRFS to get the queue number of the rx completion
interrupts.

In additional, remove the calling of
irq_set_affinity_notifier() in hns3_nic_init_irq(), because
we have registered notifier in irq_cpu_rmap_add() for each
vector, otherwise it may cause use-after-free issue.

Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:16 +02:00
Maxime Chevallier 34fb74a62f net: mvpp2: cls: Extract the RSS context when parsing the ethtool rule
[ Upstream commit c561da6803 ]

ethtool_rx_flow_rule_create takes into parameter the ethtool flow spec,
which doesn't contain the rss context id. We therefore need to extract
it ourself before parsing the ethtool rule.

The FLOW_RSS flag is only set in info->fs.flow_type, and not
info->flow_type.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:16 +02:00
Brett Creeley 43306a82a8 ice: Fix couple of issues in ice_vsi_release
[ Upstream commit aa6ccf3f2d ]

Currently the driver is calling ice_napi_del() and then
unregister_netdev(). The call to unregister_netdev() will result in a
call to ice_stop() and then ice_vsi_close(). This is where we call
napi_disable() for all the MSI-X vectors. This flow is reversed so make
the changes to ensure napi_disable() happens prior to napi_del().

Before calling napi_del() and free_netdev() make sure
unregister_netdev() was called. This is done by making sure the
__ICE_DOWN bit is set in the vsi->state for the interested VSI.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:15 +02:00
Jose Abreu 55635ebe4f net: stmmac: Prevent missing interrupts when running NAPI
[ Upstream commit a976ca79e2 ]

When we trigger NAPI we are disabling interrupts but in case we receive
or send a packet in the meantime, as interrupts are disabled, we will
miss this event.

Trigger both NAPI instances (RX and TX) when at least one event happens
so that we don't miss any interrupts.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:15 +02:00
Jose Abreu 70923b7309 net: stmmac: dwmac4/5: Clear unused address entries
[ Upstream commit 0620ec6c62 ]

In case we don't use a given address entry we need to clear it because
it could contain previous values that are no longer valid.

Found out while running stmmac selftests.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:15 +02:00
Jose Abreu e0695dfda6 net: stmmac: dwmac1000: Clear unused address entries
[ Upstream commit 9463c44559 ]

In case we don't use a given address entry we need to clear it because
it could contain previous values that are no longer valid.

Found out while running stmmac selftests.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:15 +02:00
Horia Geantă cb7da2ba53 crypto: caam - avoid S/G table fetching for AEAD zero-length output
[ Upstream commit dcd9c76e5a ]

When enabling IOMMU support, the following issue becomes visible
in the AEAD zero-length case.

Even though the output sequence length is set to zero, the crypto engine
tries to prefetch 4 S/G table entries (since SGF bit is set
in SEQ OUT PTR command - which is either generated in SW in case of
caam/jr or in HW in case of caam/qi, caam/qi2).
The DMA read operation will trigger an IOMMU fault since the address in
the SEQ OUT PTR is "dummy" (set to zero / not obtained via DMA API
mapping).

1. In case of caam/jr, avoid the IOMMU fault by clearing the SGF bit
in SEQ OUT PTR command.

2. In case of caam/qi - setting address, bpid, length to zero for output
entry in the compound frame has a special meaning (cf. CAAM RM):
"Output frame = Unspecified, Input address = Y. A unspecified frame is
indicated by an unused SGT entry (an entry in which the Address, Length,
and BPID fields are all zero). SEC obtains output buffers from BMan as
prescribed by the preheader."

Since no output buffers are needed, modify the preheader by setting
(ABS = 1, ADDBUF = 0):
-"ABS = 1 means obtain the number of buffers in ADDBUF (0 or 1) from
the pool POOL ID"
-ADDBUF: "If ABS is set, ADD BUF specifies whether to allocate
a buffer or not"

3. In case of caam/qi2, since engine:
-does not support FLE[FMT]=2'b11 ("unused" entry) mentioned in DPAA2 RM
-requires output entry to be present, even if not used
the solution chosen is to leave output frame list entry zeroized.

Fixes: 763069ba49 ("crypto: caam - handle zero-length AEAD output")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:14 +02:00
Wen Yang d58142f19b media: venus: firmware: fix leaked of_node references
[ Upstream commit 2c41cc0be0 ]

The call to of_parse_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
drivers/media/platform/qcom/venus/firmware.c:90:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 82, but without a corresponding object release within this function.
drivers/media/platform/qcom/venus/firmware.c:94:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 82, but without a corresponding object release within this function.
drivers/media/platform/qcom/venus/firmware.c:128:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 82, but without a corresponding object release within this function.

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Acked-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:14 +02:00
Brett Creeley 42db12d5cd ice: Gracefully handle reset failure in ice_alloc_vfs()
[ Upstream commit 72f9c20398 ]

Currently if ice_reset_all_vfs() fails in ice_alloc_vfs() we fail to
free some resources, reset variables, and return an error value.
Fix this by adding another unroll case to free the pf->vf array, set
the pf->num_alloc_vfs to 0, and return an error code.

Without this, if ice_reset_all_vfs() fails in ice_alloc_vfs() we will
not be able to do SRIOV without hard rebooting the system because
rmmod'ing the driver does not work.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:14 +02:00
Jungo Lin 30b81aca75 media: media_device_enum_links32: clean a reserved field
[ Upstream commit f49308878d ]

In v4l2-compliance utility, test MEDIA_IOC_ENUM_ENTITIES
will check whether reserved field of media_links_enum filled
with zero.

However, for 32 bit program, the reserved field is missing
copy from kernel space to user space in media_device_enum_links32
function.

This patch adds the cleaning a reserved field logic in
media_device_enum_links32 function.

Signed-off-by: Jungo Lin <jungo.lin@mediatek.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:14 +02:00
Kangjie Lu 8f975b1616 media: vpss: fix a potential NULL pointer dereference
[ Upstream commit e08f076123 ]

In case ioremap fails, the fix returns -ENOMEM to avoid NULL
pointer dereference.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:14 +02:00
Alexei Starovoitov d3e0b8c350 selftests/bpf: adjust verifier scale test
[ Upstream commit 7c0c6095d4 ]

Adjust scale tests to check for new jmp sequence limit.

BPF_JGT had to be changed to BPF_JEQ because the verifier was
too smart. It tracked the known safe range of R0 values
and pruned the search earlier before hitting exact 8192 limit.
bpf_semi_rand_get() was too (un)?lucky.

k = 0; was missing in bpf_fill_scale2.
It was testing a bit shorter sequence of jumps than intended.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:13 +02:00
Lubomir Rintel 1610f0fbd6 media: marvell-ccic: fix DMA s/g desc number calculation
[ Upstream commit 0c7aa32966 ]

The commit d790b7eda9 ("[media] vb2-dma-sg: move dma_(un)map_sg here")
left dma_desc_nent unset. It previously contained the number of DMA
descriptors as returned from dma_map_sg().

We can now (since the commit referred to above) obtain the same value from
the sg_table and drop dma_desc_nent altogether.

Tested on OLPC XO-1.75 machine. Doesn't affect the OLPC XO-1's Cafe
driver, since that one doesn't do DMA.

[mchehab+samsung@kernel.org: fix a checkpatch warning]

Fixes: d790b7eda9 ("[media] vb2-dma-sg: move dma_(un)map_sg here")
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:13 +02:00
Akinobu Mita 3c975a0373 media: ov7740: avoid invalid framesize setting
[ Upstream commit 6e4ab830ac ]

If the requested framesize by VIDIOC_SUBDEV_S_FMT is larger than supported
framesizes, it causes an out of bounds array access and the resulting
framesize is unexpected.

Avoid out of bounds array access and select the default framesize.

Cc: Wenyou Yang <wenyou.yang@microchip.com>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:13 +02:00
Christophe Leroy 589af2ad70 crypto: talitos - fix skcipher failure due to wrong output IV
[ Upstream commit 3e03e79286 ]

Selftests report the following:

[    2.984845] alg: skcipher: cbc-aes-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
[    2.995377] 00000000: 3d af ba 42 9d 9e b4 30 b4 22 da 80 2c 9f ac 41
[    3.032673] alg: skcipher: cbc-des-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
[    3.043185] 00000000: fe dc ba 98 76 54 32 10
[    3.063238] alg: skcipher: cbc-3des-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
[    3.073818] 00000000: 7d 33 88 93 0f 93 b2 42

This above dumps show that the actual output IV is indeed the input IV.
This is due to the IV not being copied back into the request.

This patch fixes that.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:13 +02:00
Daniel Gomez 28eb23321a media: spi: IR LED: add missing of table registration
[ Upstream commit 24e4cf7703 ]

MODULE_DEVICE_TABLE(of, <of_match_table> should be called to complete DT
OF mathing mechanism and register it.

Before this patch:
modinfo drivers/media/rc/ir-spi.ko  | grep alias

After this patch:
modinfo drivers/media/rc/ir-spi.ko  | grep alias
alias:          of:N*T*Cir-spi-ledC*
alias:          of:N*T*Cir-spi-led

Reported-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Daniel Gomez <dagmcr@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:13 +02:00
Oliver Neukum 3b6503a21e media: dvb: usb: fix use after free in dvb_usb_device_exit
[ Upstream commit 6cf97230cd ]

dvb_usb_device_exit() frees and uses the device name in that order.
Fix by storing the name in a buffer before freeing it.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-by: syzbot+26ec41e9f788b3eba396@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:12 +02:00
Jeremy Sowden 0a9f543d24 batman-adv: fix for leaked TVLV handler.
[ Upstream commit 17f78dd1bd ]

A handler for BATADV_TVLV_ROAM was being registered when the
translation-table was initialized, but not unregistered when the
translation-table was freed.  Unregister it.

Fixes: 122edaa059 ("batman-adv: tvlv - convert roaming adv packet to use tvlv unicast packets")
Reported-by: syzbot+d454a826e670502484b8@syzkaller.appspotmail.com
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:12 +02:00
Daniel Baluta dff8ea2263 regmap: debugfs: Fix memory leak in regmap_debugfs_init
[ Upstream commit 2899872b62 ]

As detected by kmemleak running on i.MX6ULL board:

nreferenced object 0xd8366600 (size 64):
  comm "swapper/0", pid 1, jiffies 4294937370 (age 933.220s)
  hex dump (first 32 bytes):
    64 75 6d 6d 79 2d 69 6f 6d 75 78 63 2d 67 70 72  dummy-iomuxc-gpr
    40 32 30 65 34 30 30 30 00 e3 f3 ab fe d1 1b dd  @20e4000........
  backtrace:
    [<b0402aec>] kasprintf+0x2c/0x54
    [<a6fbad2c>] regmap_debugfs_init+0x7c/0x31c
    [<9c8d91fa>] __regmap_init+0xb5c/0xcf4
    [<5b1c3d2a>] of_syscon_register+0x164/0x2c4
    [<596a5d80>] syscon_node_to_regmap+0x64/0x90
    [<49bd597b>] imx6ul_init_machine+0x34/0xa0
    [<250a4dac>] customize_machine+0x1c/0x30
    [<2d19fdaf>] do_one_initcall+0x7c/0x398
    [<e6084469>] kernel_init_freeable+0x328/0x448
    [<168c9101>] kernel_init+0x8/0x114
    [<913268aa>] ret_from_fork+0x14/0x20
    [<ce7b131a>] 0x0

Root cause is that map->debugfs_name is allocated using kasprintf
and then the pointer is lost by assigning it other memory address.

Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:12 +02:00
Rakesh Pillai 1708b49f4e ath10k: Fix encoding for protected management frames
[ Upstream commit 42f1bc43e6 ]

Currently the protected management frames are
not appended with the MIC_LEN which results in
the protected management frames being encoded
incorrectly.

Add the extra space at the end of the protected
management frames to fix this encoding error for
the protected management frames.

Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1

Fixes: 1807da4973 ("ath10k: wmi: add management tx by reference support over wmi")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:12 +02:00
Anilkumar Kolli b5190905a4 ath: DFS JP domain W56 fixed pulse type 3 RADAR detection
[ Upstream commit d8792393a7 ]

Increase pulse width range from 1-2usec to 0-4usec.
During data traffic HW occasionally fails detecting radar pulses,
so that SW cannot get enough radar reports to achieve the success rate.

Tested ath10k hw and fw:
	* QCA9888(10.4-3.5.1-00052)
	* QCA4019(10.4-3.2.1.1-00017)
	* QCA9984(10.4-3.6-00104)
	* QCA988X(10.2.4-1.0-00041)

Tested ath9k hw: AR9300

Tested-by: Tamizh chelvam <tamizhr@codeaurora.org>
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:11 +02:00
Maya Erez ba3e76c3cb wil6210: fix spurious interrupts in 3-msi
[ Upstream commit e10b0eddd5 ]

Interrupt is set in ICM (ICR & ~IMV) rising trigger.
As the driver masks the IRQ after clearing it, there can
be a race where an additional spurious interrupt is triggered
when the driver unmask the IRQ.
This can happen in case HW triggers an interrupt after the clear
and before the mask.

To prevent the second spurious interrupt the driver needs to mask the
IRQ before reading and clearing it.

Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:11 +02:00
Wen Gong 01fbe2f647 ath10k: add peer id check in ath10k_peer_find_by_id
[ Upstream commit 49ed34b835 ]

For some SDIO chip, the peer id is 65535 for MPDU with error status,
then test_bit will trigger buffer overflow for peer's memory, if kasan
enabled, it will report error.

Reason is when station is in disconnecting status, firmware do not delete
the peer info since it not disconnected completely, meanwhile some AP will
still send data packet to station, then hardware will receive the packet
and send to firmware, firmware's logic will report peer id of 65535 for
MPDU with error status.

Add check for overflow the size of peer's peer_ids will avoid the buffer
overflow access.

Call trace of kasan:
dump_backtrace+0x0/0x2ec
show_stack+0x20/0x2c
__dump_stack+0x20/0x28
dump_stack+0xc8/0xec
print_address_description+0x74/0x240
kasan_report+0x250/0x26c
__asan_report_load8_noabort+0x20/0x2c
ath10k_peer_find_by_id+0x180/0x1e4 [ath10k_core]
ath10k_htt_t2h_msg_handler+0x100c/0x2fd4 [ath10k_core]
ath10k_htt_htc_t2h_msg_handler+0x20/0x34 [ath10k_core]
ath10k_sdio_irq_handler+0xcc8/0x1678 [ath10k_sdio]
process_sdio_pending_irqs+0xec/0x370
sdio_run_irqs+0x68/0xe4
sdio_irq_work+0x1c/0x28
process_one_work+0x3d8/0x8b0
worker_thread+0x508/0x7cc
kthread+0x24c/0x264
ret_from_fork+0x10/0x18

Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00007-QCARMSWP-1.

Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:11 +02:00
Dan Carpenter e5e1db764e ath6kl: add some bounds checking
[ Upstream commit 5d6751eaff ]

The "ev->traffic_class" and "reply->ac" variables come from the network
and they're used as an offset into the wmi->stream_exist_for_ac[] array.
Those variables are u8 so they can be 0-255 but the stream_exist_for_ac[]
array only has WMM_NUM_AC (4) elements.  We need to add a couple bounds
checks to prevent array overflows.

I also modified one existing check from "if (traffic_class > 3) {" to
"if (traffic_class >= WMM_NUM_AC) {" just to make them all consistent.

Fixes: bdcd817079 (" Add ath6kl cleaned up driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:11 +02:00
Maya Erez 9eeb3cbd2b wil6210: fix missed MISC mbox interrupt
[ Upstream commit 7441be71ba ]

When MISC interrupt is triggered due to HALP bit, in parallel
to mbox events handling by the MISC threaded IRQ, new mbox
interrupt can be missed in the following scenario:
1. MISC ICR is read in the IRQ handler
2. Threaded IRQ is completed and all MISC interrupts are unmasked
3. mbox interrupt is set by FW
4. HALP is masked
The mbox interrupt in step 3 can be missed due to constant high level
of ICM.
Masking all MISC IRQs instead of masking only HALP bit in step 4
will guarantee that ICM will drop to 0 and interrupt will be triggered
once MISC interrupts will be unmasked.

Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:11 +02:00
Surabhi Vishnoi 4b1c22402c ath10k: Fix the wrong value of enums for wmi tlv stats id
[ Upstream commit 9280f4fc06 ]

The enum value for WMI_TLV_STAT_PDEV, WMI_TLV_STAT_VDEV
and WMI_TLV_STAT_PEER is wrong, due to which the vdev stats
are not received from firmware in wmi_update_stats event.

Fix the enum values for above stats to receive all stats
from firmware in WMI_TLV_UPDATE_STATS_EVENTID.

Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1

Fixes: f40a307eb9 ("ath10k: Fill rx duration for each peer in fw_stats for WCN3990)
Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:10 +02:00
Tim Schumacher 835ccc154b ath9k: Check for errors when reading SREV register
[ Upstream commit 2f90c7e5d0 ]

Right now, if an error is encountered during the SREV register
read (i.e. an EIO in ath9k_regread()), that error code gets
passed all the way to __ath9k_hw_init(), where it is visible
during the "Chip rev not supported" message.

    ath9k_htc 1-1.4:1.0: ath9k_htc: HTC initialized with 33 credits
    ath: phy2: Mac Chip Rev 0x0f.3 is not supported by this driver
    ath: phy2: Unable to initialize hardware; initialization status: -95
    ath: phy2: Unable to initialize hardware; initialization status: -95
    ath9k_htc: Failed to initialize the device

Check for -EIO explicitly in ath9k_hw_read_revisions() and return
a boolean based on the success of the operation. Check for that in
__ath9k_hw_init() and abort with a more debugging-friendly message
if reading the revisions wasn't successful.

    ath9k_htc 1-1.4:1.0: ath9k_htc: HTC initialized with 33 credits
    ath: phy2: Failed to read SREV register
    ath: phy2: Could not read hardware revision
    ath: phy2: Unable to initialize hardware; initialization status: -95
    ath: phy2: Unable to initialize hardware; initialization status: -95
    ath9k_htc: Failed to initialize the device

This helps when debugging by directly showing the first point of
failure and it could prevent possible errors if a 0x0f.3 revision
is ever supported.

Signed-off-by: Tim Schumacher <timschumi@gmx.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:10 +02:00
Emil Renner Berthing f2104ba4de spi: rockchip: turn down tx dma bursts
[ Upstream commit 47300728fb ]

This fixes tx and bi-directional dma transfers on rk3399-gru-kevin.

It seems the SPI fifo must have room for 2 bursts when the dma_tx_req
signal is generated or it might skip some words. This in turn makes
the rx dma channel never complete for bi-directional transfers.

Fix it by setting tx burst length to fifo_len / 4 and the dma
watermark to fifo_len / 2.

However the rk3399 TRM says (sic):
"DMAC support incrementing-address burst and fixed-address burst. But in
the case of access SPI and UART at byte or halfword size, DMAC only
support fixed-address burst and the address must be aligned to word."

So this relies on fifo_len being a multiple of 16 such that the
burst length (= fifo_len / 4) is a multiple of 4 and the addresses
will be word-aligned.

Fixes: dcfc861d24 ("spi: rockchip: adjust dma watermark and burstlen")
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:10 +02:00
Surabhi Vishnoi 0e55b0a03b ath10k: Do not send probe response template for mesh
[ Upstream commit 97354f2c43 ]

Currently mac80211 do not support probe response template for
mesh point. When WMI_SERVICE_BEACON_OFFLOAD is enabled, host
driver tries to configure probe response template for mesh, but
it fails because the interface type is not NL80211_IFTYPE_AP but
NL80211_IFTYPE_MESH_POINT.

To avoid this failure, skip sending probe response template to
firmware for mesh point.

Tested HW: WCN3990/QCA6174/QCA9984

Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:09 +02:00
Gustavo A. R. Silva 23476612f4 wil6210: fix potential out-of-bounds read
[ Upstream commit bfabdd6997 ]

Notice that *rc* can evaluate to up to 5, include/linux/netdevice.h:

enum gro_result {
        GRO_MERGED,
        GRO_MERGED_FREE,
        GRO_HELD,
        GRO_NORMAL,
        GRO_DROP,
        GRO_CONSUMED,
};
typedef enum gro_result gro_result_t;

In case *rc* evaluates to 5, we end up having an out-of-bounds read
at drivers/net/wireless/ath/wil6210/txrx.c:821:

	wil_dbg_txrx(wil, "Rx complete %d bytes => %s\n",
		     len, gro_res_str[rc]);

Fix this by adding element "GRO_CONSUMED" to array gro_res_str.

Addresses-Coverity-ID: 1444666 ("Out-of-bounds read")
Fixes: 194b482b50 ("wil6210: Debug print GRO Rx result")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:09 +02:00
Toke Høiland-Jørgensen b38e4647d2 ath9k: Don't trust TX status TID number when reporting airtime
[ Upstream commit 389b72e582 ]

As already noted a comment in ath_tx_complete_aggr(), the hardware will
occasionally send a TX status with the wrong tid number. If we trust the
value, airtime usage will be reported to the wrong AC, which can cause the
deficit on that AC to become very low, blocking subsequent attempts to
transmit.

To fix this, account airtime usage to the TID number from the original skb,
instead of the one in the hardware TX status report.

Reported-by: Miguel Catalan Cid <miguel.catalan@i2cat.net>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:09 +02:00
Pradeep kumar Chitrapu 1fd51551c7 ath10k: fix incorrect multicast/broadcast rate setting
[ Upstream commit 93ee3d108f ]

Invalid rate code is sent to firmware when multicast rate value of 0 is
sent to driver indicating disabled case, causing broken mesh path.
so fix that.

Tested on QCA9984 with firmware 10.4-3.6.1-00827

Sven tested on IPQ4019 with 10.4-3.5.3-00057 and QCA9888 with 10.4-3.5.3-00053
(ath10k-firmware) and 10.4-3.6-00140 (linux-firmware 2018-12-16-211de167).

Fixes: cd93b83ad9 ("ath10k: support for multicast rate control")
Co-developed-by: Zhi Chen <zhichen@codeaurora.org>
Signed-off-by: Zhi Chen <zhichen@codeaurora.org>
Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Tested-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:09 +02:00
Alagu Sankar 8dba6daad5 ath10k: htt: don't use txdone_fifo with SDIO
[ Upstream commit e2a6b71128 ]

HTT High Latency (ATH10K_DEV_TYPE_HL) does not use txdone_fifo at all, we don't
even initialise it by skipping ath10k_htt_tx_alloc_buf() in
ath10k_htt_tx_start(). Because of this using QCA6174 SDIO
ath10k_htt_rx_tx_compl_ind() will crash when it accesses unitialised
txdone_fifo. So skip txdone_fifo when using High Latency mode.

Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00007-QCARMSWP-1.

Co-developed-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Alagu Sankar <alagusankar@silex-india.com>
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:09 +02:00
Yingying Tang 5f0cf3dfc0 ath10k: Check tx_stats before use it
[ Upstream commit 9e7251fa38 ]

tx_stats will be freed and set to NULL before debugfs_sta node is
removed in station disconnetion process. So if read the debugfs_sta
node there may be NULL pointer error. Add check for tx_stats before
use it to resove this issue.

Signed-off-by: Yingying Tang <yintang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26 09:10:08 +02:00
Greg Kroah-Hartman e9b75c60f9 Linux 5.2.2 2019-07-21 09:00:45 +02:00
Jiri Slaby 760d269d9e x86/entry/32: Fix ENDPROC of common_spurious
[ Upstream commit 1cbec37b3f ]

common_spurious is currently ENDed erroneously. common_interrupt is used
in its ENDPROC. So fix this mistake.

Found by my asm macros rewrite patchset.

Fixes: f8a8fe61fe ("x86/irq: Seperate unused system vectors from spurious entry again")
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190709063402.19847-1-jslaby@suse.cz
Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-21 09:00:44 +02:00
Haren Myneni 6d9584d642 crypto/NX: Set receive window credits to max number of CRBs in RxFIFO
commit e52d484d98 upstream.

System gets checkstop if RxFIFO overruns with more requests than the
maximum possible number of CRBs in FIFO at the same time. The max number
of requests per window is controlled by window credits. So find max
CRBs from FIFO size and set it to receive window credits.

Fixes: b0d6c9bab5 ("crypto/nx: Add P9 NX support for 842 compression engine")
CC: stable@vger.kernel.org # v4.14+
Signed-off-by:Haren Myneni <haren@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-21 09:00:44 +02:00
Christophe Leroy 4509f315cc crypto: talitos - fix hash on SEC1.
commit 58cdbc6d22 upstream.

On SEC1, hash provides wrong result when performing hashing in several
steps with input data SG list has more than one element. This was
detected with CONFIG_CRYPTO_MANAGER_EXTRA_TESTS:

[   44.185947] alg: hash: md5-talitos test failed (wrong result) on test vector 6, cfg="random: may_sleep use_finup src_divs=[<reimport>25.88%@+8063, <flush>24.19%@+9588, 28.63%@+16333, <reimport>4.60%@+6756, 16.70%@+16281] dst_divs=[71.61%@alignmask+16361, 14.36%@+7756, 14.3%@+"
[   44.325122] alg: hash: sha1-talitos test failed (wrong result) on test vector 3, cfg="random: inplace use_final src_divs=[<flush,nosimd>16.56%@+16378, <reimport>52.0%@+16329, 21.42%@alignmask+16380, 10.2%@alignmask+16380] iv_offset=39"
[   44.493500] alg: hash: sha224-talitos test failed (wrong result) on test vector 4, cfg="random: use_final nosimd src_divs=[<reimport>52.27%@+7401, <reimport>17.34%@+16285, <flush>17.71%@+26, 12.68%@+10644] iv_offset=43"
[   44.673262] alg: hash: sha256-talitos test failed (wrong result) on test vector 4, cfg="random: may_sleep use_finup src_divs=[<reimport>60.6%@+12790, 17.86%@+1329, <reimport>12.64%@alignmask+16300, 8.29%@+15, 0.40%@+13506, <reimport>0.51%@+16322, <reimport>0.24%@+16339] dst_divs"

This is due to two issues:
- We have an overlap between the buffer used for copying the input
data (SEC1 doesn't do scatter/gather) and the chained descriptor.
- Data copy is wrong when the previous hash left less than one
blocksize of data to hash, implying a complement of the previous
block with a few bytes from the new request.

Fix it by:
- Moving the second descriptor after the buffer, as moving the buffer
after the descriptor would make it more complex for other cipher
operations (AEAD, ABLKCIPHER)
- Skip the bytes taken from the new request to complete the previous
one by moving the SG list forward.

Fixes: 37b5e8897e ("crypto: talitos - chain in buffered data for ahash on SEC1")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-21 09:00:44 +02:00
Christophe Leroy c506680ae8 crypto: talitos - move struct talitos_edesc into talitos.h
commit d44769e4cc upstream.

Moves struct talitos_edesc into talitos.h so that it can be used
from any place in talitos.c

It will be required for next patch ("crypto: talitos - fix hash
on SEC1")

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-21 09:00:43 +02:00
Julian Wiedmann 90c7a327a9 s390/qdio: don't touch the dsci in tiqdio_add_input_queues()
commit ac6639cd3d upstream.

Current code sets the dsci to 0x00000080. Which doesn't make any sense,
as the indicator area is located in the _left-most_ byte.

Worse: if the dsci is the _shared_ indicator, this potentially clears
the indication of activity for a _different_ device.
tiqdio_thinint_handler() will then have no reason to call that device's
IRQ handler, and the device ends up stalling.

Fixes: d0c9d4a89f ("[S390] qdio: set correct bit in dsci")
Cc: <stable@vger.kernel.org>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-21 09:00:43 +02:00
Julian Wiedmann c26226c589 s390/qdio: (re-)initialize tiqdio list entries
commit e54e4785cb upstream.

When tiqdio_remove_input_queues() removes a queue from the tiq_list as
part of qdio_shutdown(), it doesn't re-initialize the queue's list entry
and the prev/next pointers go stale.

If a subsequent qdio_establish() fails while sending the ESTABLISH cmd,
it calls qdio_shutdown() again in QDIO_IRQ_STATE_ERR state and
tiqdio_remove_input_queues() will attempt to remove the queue entry a
second time. This dereferences the stale pointers, and bad things ensue.
Fix this by re-initializing the list entry after removing it from the
list.

For good practice also initialize the list entry when the queue is first
allocated, and remove the quirky checks that papered over this omission.
Note that prior to
commit e521813468 ("s390/qdio: fix access to uninitialized qdio_q fields"),
these checks were bogus anyway.

setup_queues_misc() clears the whole queue struct, and thus needs to
re-init the prev/next pointers as well.

Fixes: 779e6e1c72 ("[S390] qdio: new qdio driver.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-21 09:00:43 +02:00
Heiko Carstens 3bbbf5bbe7 s390: fix stfle zero padding
commit 4f18d869ff upstream.

The stfle inline assembly returns the number of double words written
(condition code 0) or the double words it would have written
(condition code 3), if the memory array it got as parameter would have
been large enough.

The current stfle implementation assumes that the array is always
large enough and clears those parts of the array that have not been
written to with a subsequent memset call.

If however the array is not large enough memset will get a negative
length parameter, which means that memset clears memory until it gets
an exception and the kernel crashes.

To fix this simply limit the maximum length. Move also the inline
assembly to an extra function to avoid clobbering of register 0, which
might happen because of the added min_t invocation together with code
instrumentation.

The bug was introduced with commit 14375bc4eb ("[S390] cleanup
facility list handling") but was rather harmless, since it would only
write to a rather large array. It became a potential problem with
commit 3ab121ab18 ("[S390] kernel: Add z/VM LGR detection"). Since
then it writes to an array with only four double words, while some
machines already deliver three double words. As soon as machines have
a facility bit within the fifth double a crash on IPL would happen.

Fixes: 14375bc4eb ("[S390] cleanup facility list handling")
Cc: <stable@vger.kernel.org> # v2.6.37+
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-21 09:00:42 +02:00
Philipp Rudo bb48afc69d s390/ipl: Fix detection of has_secure attribute
commit 1b2be2071a upstream.

Use the correct bit for detection of the machine capability associated
with the has_secure attribute. It is expected that the underlying
platform (including hypervisors) unsets the bit when they don't provide
secure ipl for their guests.

Fixes: c9896acc78 ("s390/ipl: Provide has_secure sysfs attribute")
Cc: stable@vger.kernel.org # 5.2
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-21 09:00:42 +02:00
Arnd Bergmann 175713c121 ARC: hide unused function unw_hdr_alloc
commit fd5de2721e upstream.

As kernelci.org reports, this function is not used in
vdk_hs38_defconfig:

arch/arc/kernel/unwind.c:188:14: warning: 'unw_hdr_alloc' defined but not used [-Wunused-function]

Fixes: bc79c9a721 ("ARC: dw2 unwind: Reinstante unwinding out of modules")
Link: https://kernelci.org/build/id/5d1cae3f59b514300340c132/logs/
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-21 09:00:41 +02:00
Thomas Gleixner f29cd95ca0 x86/irq: Seperate unused system vectors from spurious entry again
commit f8a8fe61fe upstream.

Quite some time ago the interrupt entry stubs for unused vectors in the
system vector range got removed and directly mapped to the spurious
interrupt vector entry point.

Sounds reasonable, but it's subtly broken. The spurious interrupt vector
entry point pushes vector number 0xFF on the stack which makes the whole
logic in __smp_spurious_interrupt() pointless.

As a consequence any spurious interrupt which comes from a vector != 0xFF
is treated as a real spurious interrupt (vector 0xFF) and not
acknowledged. That subsequently stalls all interrupt vectors of equal and
lower priority, which brings the system to a grinding halt.

This can happen because even on 64-bit the system vector space is not
guaranteed to be fully populated. A full compile time handling of the
unused vectors is not possible because quite some of them are conditonally
populated at runtime.

Bring the entry stubs back, which wastes 160 bytes if all stubs are unused,
but gains the proper handling back. There is no point to selectively spare
some of the stubs which are known at compile time as the required code in
the IDT management would be way larger and convoluted.

Do not route the spurious entries through common_interrupt and do_IRQ() as
the original code did. Route it to smp_spurious_interrupt() which evaluates
the vector number and acts accordingly now that the real vector numbers are
handed in.

Fixup the pr_warn so the actual spurious vector (0xff) is clearly
distiguished from the other vectors and also note for the vectored case
whether it was pending in the ISR or not.

 "Spurious APIC interrupt (vector 0xFF) on CPU#0, should never happen."
 "Spurious interrupt vector 0xed on CPU#1. Acked."
 "Spurious interrupt vector 0xee on CPU#1. Not pending!."

Fixes: 2414e021ac ("x86: Avoid building unused IRQ entry stubs")
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jan Beulich <jbeulich@suse.com>
Link: https://lkml.kernel.org/r/20190628111440.550568228@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-21 09:00:41 +02:00
Thomas Gleixner d15169864e x86/irq: Handle spurious interrupt after shutdown gracefully
commit b7107a67f0 upstream.

Since the rework of the vector management, warnings about spurious
interrupts have been reported. Robert provided some more information and
did an initial analysis. The following situation leads to these warnings:

   CPU 0                  CPU 1               IO_APIC

                                              interrupt is raised
                                              sent to CPU1
			  Unable to handle
			  immediately
			  (interrupts off,
			   deep idle delay)
   mask()
   ...
   free()
     shutdown()
     synchronize_irq()
     clear_vector()
                          do_IRQ()
                            -> vector is clear

Before the rework the vector entries of legacy interrupts were statically
assigned and occupied precious vector space while most of them were
unused. Due to that the above situation was handled silently because the
vector was handled and the core handler of the assigned interrupt
descriptor noticed that it is shut down and returned.

While this has been usually observed with legacy interrupts, this situation
is not limited to them. Any other interrupt source, e.g. MSI, can cause the
same issue.

After adding proper synchronization for level triggered interrupts, this
can only happen for edge triggered interrupts where the IO-APIC obviously
cannot provide information about interrupts in flight.

While the spurious warning is actually harmless in this case it worries
users and driver developers.

Handle it gracefully by marking the vector entry as VECTOR_SHUTDOWN instead
of VECTOR_UNUSED when the vector is freed up.

If that above late handling happens the spurious detector will not complain
and switch the entry to VECTOR_UNUSED. Any subsequent spurious interrupt on
that line will trigger the spurious warning as before.

Fixes: 464d12309e ("x86/vector: Switch IOAPIC to global reservation mode")
Reported-by: Robert Hodaszi <Robert.Hodaszi@digi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>-
Tested-by: Robert Hodaszi <Robert.Hodaszi@digi.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20190628111440.459647741@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-21 09:00:40 +02:00
Thomas Gleixner fd5f4b9a33 x86/ioapic: Implement irq_get_irqchip_state() callback
commit dfe0cf8b51 upstream.

When an interrupt is shut down in free_irq() there might be an inflight
interrupt pending in the IO-APIC remote IRR which is not yet serviced. That
means the interrupt has been sent to the target CPUs local APIC, but the
target CPU is in a state which delays the servicing.

So free_irq() would proceed to free resources and to clear the vector
because synchronize_hardirq() does not see an interrupt handler in
progress.

That can trigger a spurious interrupt warning, which is harmless and just
confuses users, but it also can leave the remote IRR in a stale state
because once the handler is invoked the interrupt resources might be freed
already and therefore acknowledgement is not possible anymore.

Implement the irq_get_irqchip_state() callback for the IO-APIC irq chip. The
callback is invoked from free_irq() via __synchronize_hardirq(). Check the
remote IRR bit of the interrupt and return 'in flight' if it is set and the
interrupt is configured in level mode. For edge mode the remote IRR has no
meaning.

As this is only meaningful for level triggered interrupts this won't cure
the potential spurious interrupt warning for edge triggered interrupts, but
the edge trigger case does not result in stale hardware state. This has to
be addressed at the vector/interrupt entry level seperately.

Fixes: 464d12309e ("x86/vector: Switch IOAPIC to global reservation mode")
Reported-by: Robert Hodaszi <Robert.Hodaszi@digi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20190628111440.370295517@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-21 09:00:40 +02:00
Thomas Gleixner f4999a2a3a genirq: Add optional hardware synchronization for shutdown
commit 62e0468650 upstream.

free_irq() ensures that no hardware interrupt handler is executing on a
different CPU before actually releasing resources and deactivating the
interrupt completely in a domain hierarchy.

But that does not catch the case where the interrupt is on flight at the
hardware level but not yet serviced by the target CPU. That creates an
interesing race condition:

   CPU 0                  CPU 1               IRQ CHIP

                                              interrupt is raised
                                              sent to CPU1
			  Unable to handle
			  immediately
			  (interrupts off,
			   deep idle delay)
   mask()
   ...
   free()
     shutdown()
     synchronize_irq()
     release_resources()
                          do_IRQ()
                            -> resources are not available

That might be harmless and just trigger a spurious interrupt warning, but
some interrupt chips might get into a wedged state.

Utilize the existing irq_get_irqchip_state() callback for the
synchronization in free_irq().

synchronize_hardirq() is not using this mechanism as it might actually
deadlock unter certain conditions, e.g. when called with interrupts
disabled and the target CPU is the one on which the synchronization is
invoked. synchronize_irq() uses it because that function cannot be called
from non preemtible contexts as it might sleep.

No functional change intended and according to Marc the existing GIC
implementations where the driver supports the callback should be able
to cope with that core change. Famous last words.

Fixes: 464d12309e ("x86/vector: Switch IOAPIC to global reservation mode")
Reported-by: Robert Hodaszi <Robert.Hodaszi@digi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20190628111440.279463375@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-21 09:00:39 +02:00
Thomas Gleixner 41e95c3449 genirq: Fix misleading synchronize_irq() documentation
commit 1d21f2af85 upstream.

The function might sleep, so it cannot be called from interrupt
context. Not even with care.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20190628111440.189241552@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-21 09:00:39 +02:00
Thomas Gleixner 5db47f4300 genirq: Delay deactivation in free_irq()
commit 4001d8e876 upstream.

When interrupts are shutdown, they are immediately deactivated in the
irqdomain hierarchy. While this looks obviously correct there is a subtle
issue:

There might be an interrupt in flight when free_irq() is invoking the
shutdown. This is properly handled at the irq descriptor / primary handler
level, but the deactivation might completely disable resources which are
required to acknowledge the interrupt.

Split the shutdown code and deactivate the interrupt after synchronization
in free_irq(). Fixup all other usage sites where this is not an issue to
invoke the combined shutdown_and_deactivate() function instead.

This still might be an issue if the interrupt in flight servicing is
delayed on a remote CPU beyond the invocation of synchronize_irq(), but
that cannot be handled at that level and needs to be handled in the
synchronize_irq() context.

Fixes: f8264e3496 ("irqdomain: Introduce new interfaces to support hierarchy irqdomains")
Reported-by: Robert Hodaszi <Robert.Hodaszi@digi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20190628111440.098196390@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-21 09:00:39 +02:00
Sven Van Asbroeck 5f1733eaec firmware: improve LSM/IMA security behaviour
commit 2472d64af2 upstream.

The firmware loader queries if LSM/IMA permits it to load firmware
via the sysfs fallback. Unfortunately, the code does the opposite:
it expressly permits sysfs fw loading if security_kernel_load_data(
LOADING_FIRMWARE) returns -EACCES. This happens because a
zero-on-success return value is cast to a bool that's true on success.

Fix the return value handling so we get the correct behaviour.

Fixes: 6e852651f2 ("firmware: add call to LSM hook before firmware sysfs fallback")
Cc: Stable <stable@vger.kernel.org>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Kees Cook <keescook@chromium.org>
To: Luis Chamberlain <mcgrof@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-21 09:00:38 +02:00
James Morse afe692c61f drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT
commit 83b44fe343 upstream.

The cacheinfo structures are alloced/freed by cpu online/offline
callbacks. Originally these were only used by sysfs to expose the
cache topology to user space. Without any in-kernel dependencies
CPUHP_AP_ONLINE_DYN was an appropriate choice.

resctrl has started using these structures to identify CPUs that
share a cache. It updates its 'domain' structures from cpu
online/offline callbacks. These depend on the cacheinfo structures
(resctrl_online_cpu()->domain_add_cpu()->get_cache_id()->
 get_cpu_cacheinfo()).
These also run as CPUHP_AP_ONLINE_DYN.

Now that there is an in-kernel dependency, move the cacheinfo
work earlier so we know its done before resctrl's CPUHP_AP_ONLINE_DYN
work runs.

Fixes: 2264d9c74d ("x86/intel_rdt: Build structures for each resource based on cache topology")
Cc: <stable@vger.kernel.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20190624173656.202407-1-james.morse@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-21 09:00:38 +02:00
Masahiro Yamada 744da332c4 nilfs2: do not use unexported cpu_to_le32()/le32_to_cpu() in uapi header
commit c32cc30c05 upstream.

cpu_to_le32/le32_to_cpu is defined in include/linux/byteorder/generic.h,
which is not exported to user-space.

UAPI headers must use the ones prefixed with double-underscore.

Detected by compile-testing exported headers:

  include/linux/nilfs2_ondisk.h: In function `nilfs_checkpoint_set_snapshot':
  include/linux/nilfs2_ondisk.h:536:17: error: implicit declaration of function `cpu_to_le32' [-Werror=implicit-function-declaration]
    cp->cp_flags = cpu_to_le32(le32_to_cpu(cp->cp_flags) |  \
                   ^
  include/linux/nilfs2_ondisk.h:552:1: note: in expansion of macro `NILFS_CHECKPOINT_FNS'
   NILFS_CHECKPOINT_FNS(SNAPSHOT, snapshot)
   ^~~~~~~~~~~~~~~~~~~~
  include/linux/nilfs2_ondisk.h:536:29: error: implicit declaration of function `le32_to_cpu' [-Werror=implicit-function-declaration]
    cp->cp_flags = cpu_to_le32(le32_to_cpu(cp->cp_flags) |  \
                               ^
  include/linux/nilfs2_ondisk.h:552:1: note: in expansion of macro `NILFS_CHECKPOINT_FNS'
   NILFS_CHECKPOINT_FNS(SNAPSHOT, snapshot)
   ^~~~~~~~~~~~~~~~~~~~
  include/linux/nilfs2_ondisk.h: In function `nilfs_segment_usage_set_clean':
  include/linux/nilfs2_ondisk.h:622:19: error: implicit declaration of function `cpu_to_le64' [-Werror=implicit-function-declaration]
    su->su_lastmod = cpu_to_le64(0);
                     ^~~~~~~~~~~

Link: http://lkml.kernel.org/r/20190605053006.14332-1-yamada.masahiro@socionext.com
Fixes: e63e88bc53 ("nilfs2: move ioctl interface and disk layout to uapi separately")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Joe Perches <joe@perches.com>
Cc: <stable@vger.kernel.org>	[4.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-21 09:00:38 +02:00
Cole Rogers 9d405dcfad Input: synaptics - enable SMBUS on T480 thinkpad trackpad
commit abbe3acd7d upstream.

Thinkpad t480 laptops had some touchpad features disabled, resulting in the
loss of pinch to activities in GNOME, on wayland, and other touch gestures
being slower. This patch adds the touchpad of the t480 to the smbus_pnp_ids
whitelist to enable the extra features. In my testing this does not break
suspend (on fedora, with wayland, and GNOME, using the rc-6 kernel), while
also fixing the feature on a T480.

Signed-off-by: Cole Rogers <colerogers@disroot.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-21 09:00:37 +02:00
Konstantin Khlebnikov c3ab182418 e1000e: start network tx queue only when link is up
commit d17ba0f616 upstream.

Driver does not want to keep packets in Tx queue when link is lost.
But present code only reset NIC to flush them, but does not prevent
queuing new packets. Moreover reset sequence itself could generate
new packets via netconsole and NIC falls into endless reset loop.

This patch wakes Tx queue only when NIC is ready to send packets.

This is proper fix for problem addressed by commit 0f9e980bf5
("e1000e: fix cyclic resets at link up with active tx").

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Tested-by: Joseph Yasi <joe.yasi@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Tested-by: Oleksandr Natalenko <oleksandr@redhat.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-21 09:00:37 +02:00
Konstantin Khlebnikov bb1f1b27b3 Revert "e1000e: fix cyclic resets at link up with active tx"
commit caff422ea8 upstream.

This reverts commit 0f9e980bf5.

That change cased false-positive warning about hardware hang:

e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
e1000e 0000:00:1f.6 eth0: Detected Hardware Unit Hang:
   TDH                  <0>
   TDT                  <1>
   next_to_use          <1>
   next_to_clean        <0>
buffer_info[next_to_clean]:
   time_stamp           <fffba7a7>
   next_to_watch        <0>
   jiffies              <fffbb140>
   next_to_watch.status <0>
MAC Status             <40080080>
PHY Status             <7949>
PHY 1000BASE-T Status  <0>
PHY Extended Status    <3000>
PCI Status             <10>
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx

Besides warning everything works fine.
Original issue will be fixed property in following patch.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reported-by: Joseph Yasi <joe.yasi@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203175
Tested-by: Joseph Yasi <joe.yasi@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Tested-by: Oleksandr Natalenko <oleksandr@redhat.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-21 09:00:36 +02:00
Greg Kroah-Hartman 527a3db363 Linux 5.2.1 2019-07-14 08:01:15 +02:00
Arnd Bergmann 090ce9c93e staging: rtl8712: reduce stack usage, again
commit fbd6b25009 upstream.

An earlier patch I sent reduced the stack usage enough to get
below the warning limit, and I could show this was safe, but with
GCC_PLUGIN_STRUCTLEAK_BYREF_ALL, it gets worse again because large stack
variables in the same function no longer overlap:

drivers/staging/rtl8712/rtl871x_ioctl_linux.c: In function 'translate_scan.isra.2':
drivers/staging/rtl8712/rtl871x_ioctl_linux.c:322:1: error: the frame size of 1200 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]

Split out the largest two blocks in the affected function into two
separate functions and mark those noinline_for_stack.

Fixes: 8c5af16f79 ("staging: rtl8712: reduce stack usage")
Fixes: 81a56f6dcd ("gcc-plugins: structleak: Generalize to all variable types")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:15 +02:00
Dave Stevenson fa7314b845 staging: bcm2835-camera: Handle empty EOS buffers whilst streaming
commit a26be06d6d upstream.

The change to mapping V4L2 to MMAL buffers 1:1 didn't handle
the condition we get with raw pixel buffers (eg YUV and RGB)
direct from the camera's stills port. That sends the pixel buffer
and then an empty buffer with the EOS flag set. The EOS buffer
wasn't handled and returned an error up the stack.

Handle the condition correctly by returning it to the component
if streaming, or returning with an error if stopping streaming.

Fixes: 9384167070 ("staging: bcm2835-camera: Remove V4L2/MMAL buffer remapping")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:14 +02:00
Dave Stevenson bc54525818 staging: bcm2835-camera: Remove check of the number of buffers supplied
commit bb8e97006d upstream.

Before commit "staging: bcm2835-camera: Remove V4L2/MMAL buffer remapping"
there was a need to ensure that there were sufficient buffers supplied from
the user to cover those being sent to the VPU (always 1).

Now the buffers are linked 1:1 between MMAL and V4L2,
therefore there is no need for that check, and indeed it is wrong
as there is no need to submit all the buffers before starting streaming.

Fixes: 9384167070 ("staging: bcm2835-camera: Remove V4L2/MMAL buffer remapping")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:14 +02:00
Dave Stevenson 4b28ea4170 staging: bcm2835-camera: Ensure all buffers are returned on disable
commit 70ec64ccda upstream.

With the recent change to match MMAL and V4L2 buffers there
is a need to wait for all MMAL buffers to be returned during
stop_streaming.

Fixes: 9384167070 ("staging: bcm2835-camera: Remove V4L2/MMAL buffer remapping")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:14 +02:00
Dave Stevenson fd84f7f7b8 staging: bcm2835-camera: Replace spinlock protecting context_map with mutex
commit 8dedab2903 upstream.

The commit "staging: bcm2835-camera: Replace open-coded idr with a struct idr."
replaced an internal implementation of an idr with the standard functions
and a spinlock. idr_alloc(GFP_KERNEL) can sleep whilst calling kmem_cache_alloc
to allocate the new node, but this is not valid whilst in an atomic context
due to the spinlock.

There is no need for this to be a spinlock as a standard mutex is
sufficient.

Fixes: 950fd867c6 ("staging: bcm2835-camera: Replace open-coded idr with a struct idr.")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:14 +02:00
Colin Ian King 6766564309 staging: fsl-dpaa2/ethsw: fix memory leak of switchdev_work
commit 5555ebbbac upstream.

In the default event case switchdev_work is being leaked because
nothing is queued for work. Fix this by kfree'ing switchdev_work
before returning NOTIFY_DONE.

Addresses-Coverity: ("Resource leak")
Fixes: 44baaa43d7 ("staging: fsl-dpaa2/ethsw: Add Freescale DPAA2 Ethernet Switch driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:14 +02:00
Nicolas Saenz Julienne 7fc7b74682 staging: vchiq: revert "switch to wait_for_completion_killable"
commit 086efbabdc upstream.

The killable version of wait_for_completion() is meant to be used on
situations where it should not fail at all costs, but still have the
convenience of being able to kill it if really necessary. VCHIQ doesn't
fit this criteria, as it's mainly used as an interface to V4L2 and ALSA
devices.

Fixes: a772f11670 ("staging: vchiq: switch to wait_for_completion_killable")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:14 +02:00
Nicolas Saenz Julienne ec1ce3a6d2 staging: vchiq: make wait events interruptible
commit 77cf3f5dcf upstream.

The killable version of wait_event() is meant to be used on situations
where it should not fail at all costs, but still have the convenience of
being able to kill it if really necessary. Wait events in VCHIQ doesn't
fit this criteria, as it's mainly used as an interface to V4L2 and ALSA
devices.

Fixes: 852b2876a8 ("staging: vchiq: rework remove_event handling")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:14 +02:00
Nicolas Saenz Julienne 4e5cde2477 staging: vchiq_2835_arm: revert "quit using custom down_interruptible()"
commit 061ca1401f upstream.

The killable version of down() is meant to be used on situations where
it should not fail at all costs, but still have the convenience of being
able to kill it if really necessary. VCHIQ doesn't fit this criteria, as
it's mainly used as an interface to V4L2 and ALSA devices.

Fixes: ff5979ad86 ("staging: vchiq_2835_arm: quit using custom down_interruptible()")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:14 +02:00
Vishnu DASA 89fda9ad58 VMCI: Fix integer overflow in VMCI handle arrays
commit 1c2eb5b285 upstream.

The VMCI handle array has an integer overflow in
vmci_handle_arr_append_entry when it tries to expand the array. This can be
triggered from a guest, since the doorbell link hypercall doesn't impose a
limit on the number of doorbell handles that a VM can create in the
hypervisor, and these handles are stored in a handle array.

In this change, we introduce a mandatory max capacity for handle
arrays/lists to avoid excessive memory usage.

Signed-off-by: Vishnu Dasa <vdasa@vmware.com>
Reviewed-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:13 +02:00
Ross Zwisler 7ce6dfc897 Revert "x86/build: Move _etext to actual end of .text"
commit 013c66edf2 upstream.

This reverts commit 392bef7096.

Per the discussion here:

  https://lkml.kernel.org/r/201906201042.3BF5CD6@keescook

the above referenced commit breaks kernel compilation with old GCC
toolchains as well as current versions of the Gold linker.

Revert it to fix the regression and to keep the ability to compile the
kernel with these tools.

Signed-off-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Cc: <stable@vger.kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Johannes Hirte <johannes.hirte@datenkhaos.de>
Cc: Klaus Kusche <klaus.kusche@computerix.info>
Cc: samitolvanen@google.com
Cc: Guenter Roeck <groeck@google.com>
Link: https://lkml.kernel.org/r/20190701155208.211815-1-zwisler@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:13 +02:00
Christian Lamparter 0a53ab05d4 carl9170: fix misuse of device driver API
commit feb09b2933 upstream.

This patch follows Alan Stern's recent patch:
"p54: Fix race between disconnect and firmware loading"

that overhauled carl9170 buggy firmware loading and driver
unbinding procedures.

Since the carl9170 code was adapted from p54 it uses the
same functions and is likely to have the same problem, but
it's just that the syzbot hasn't reproduce them (yet).

a summary from the changes (copied from the p54 patch):
 * Call usb_driver_release_interface() rather than
   device_release_driver().

 * Lock udev (the interface's parent) before unbinding the
   driver instead of locking udev->parent.

 * During the firmware loading process, take a reference
   to the USB interface instead of the USB device.

 * Don't take an unnecessary reference to the device during
   probe (and then don't drop it during disconnect).

and

 * Make sure to prevent use-after-free bugs by explicitly
   setting the driver context to NULL after signaling the
   completion.

Cc: <stable@vger.kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:13 +02:00
Suzuki K Poulose fb0ce48ae8 coresight: tmc-etf: Do not call smp_processor_id from preemptible
commit 024c1fd9db upstream.

During a perf session we try to allocate buffers on the "node" associated
with the CPU the event is bound to. If it is not bound to a CPU, we
use the current CPU node, using smp_processor_id(). However this is unsafe
in a pre-emptible context and could generate the splats as below :

 BUG: using smp_processor_id() in preemptible [00000000] code: perf/2544
 caller is tmc_alloc_etf_buffer+0x5c/0x60
 CPU: 2 PID: 2544 Comm: perf Not tainted 5.1.0-rc6-147786-g116841e #344
 Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Feb  1 2019
 Call trace:
  dump_backtrace+0x0/0x150
  show_stack+0x14/0x20
  dump_stack+0x9c/0xc4
  debug_smp_processor_id+0x10c/0x110
  tmc_alloc_etf_buffer+0x5c/0x60
  etm_setup_aux+0x1c4/0x230
  rb_alloc_aux+0x1b8/0x2b8
  perf_mmap+0x35c/0x478
  mmap_region+0x34c/0x4f0
  do_mmap+0x2d8/0x418
  vm_mmap_pgoff+0xd0/0xf8
  ksys_mmap_pgoff+0x88/0xf8
  __arm64_sys_mmap+0x28/0x38
  el0_svc_handler+0xd8/0x138
  el0_svc+0x8/0xc

Use NUMA_NO_NODE hint instead of using the current node for events
not bound to CPUs.

Fixes: 2e499bbc1a ("coresight: tmc: implementing TMC-ETF AUX space API")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: stable <stable@vger.kernel.org> # 4.7+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20190620221237.3536-4-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:13 +02:00
Suzuki K Poulose 0927f641fb coresight: tmc-etr: alloc_perf_buf: Do not call smp_processor_id from preemptible
commit 3a8710392d upstream.

During a perf session we try to allocate buffers on the "node" associated
with the CPU the event is bound to. If it is not bound to a CPU, we
use the current CPU node, using smp_processor_id(). However this is unsafe
in a pre-emptible context and could generate the splats as below :

 BUG: using smp_processor_id() in preemptible [00000000] code: perf/1743
 caller is tmc_alloc_etr_buffer+0x1bc/0x1f0
 CPU: 1 PID: 1743 Comm: perf Not tainted 5.1.0-rc6-147786-g116841e #344
 Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Feb  1 2019
 Call trace:
  dump_backtrace+0x0/0x150
  show_stack+0x14/0x20
  dump_stack+0x9c/0xc4
  debug_smp_processor_id+0x10c/0x110
  tmc_alloc_etr_buffer+0x1bc/0x1f0
  etm_setup_aux+0x1c4/0x230
  rb_alloc_aux+0x1b8/0x2b8
  perf_mmap+0x35c/0x478
  mmap_region+0x34c/0x4f0
  do_mmap+0x2d8/0x418
  vm_mmap_pgoff+0xd0/0xf8
  ksys_mmap_pgoff+0x88/0xf8
  __arm64_sys_mmap+0x28/0x38
  el0_svc_handler+0xd8/0x138
  el0_svc+0x8/0xc

Use NUMA_NO_NODE hint instead of using the current node for events
not bound to CPUs.

Fixes: 22f429f19c ("coresight: etm-perf: Add support for ETR backend")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: stable <stable@vger.kernel.org> # 4.20+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20190620221237.3536-3-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:13 +02:00
Suzuki K Poulose e8548724a7 coresight: tmc-etr: Do not call smp_processor_id() from preemptible
commit 3ff44563db upstream.

During a perf session we try to allocate buffers on the "node" associated
with the CPU the event is bound to. If it's not bound to a CPU, we use
the current CPU node, using smp_processor_id(). However this is unsafe
in a pre-emptible context and could generate the splats as below :

 BUG: using smp_processor_id() in preemptible [00000000] code: perf/1743
 caller is alloc_etr_buf.isra.6+0x80/0xa0
 CPU: 1 PID: 1743 Comm: perf Not tainted 5.1.0-rc6-147786-g116841e #344
 Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Feb  1 2019
  Call trace:
   dump_backtrace+0x0/0x150
   show_stack+0x14/0x20
   dump_stack+0x9c/0xc4
   debug_smp_processor_id+0x10c/0x110
   alloc_etr_buf.isra.6+0x80/0xa0
   tmc_alloc_etr_buffer+0x12c/0x1f0
   etm_setup_aux+0x1c4/0x230
   rb_alloc_aux+0x1b8/0x2b8
   perf_mmap+0x35c/0x478
   mmap_region+0x34c/0x4f0
   do_mmap+0x2d8/0x418
   vm_mmap_pgoff+0xd0/0xf8
   ksys_mmap_pgoff+0x88/0xf8
   __arm64_sys_mmap+0x28/0x38
   el0_svc_handler+0xd8/0x138
   el0_svc+0x8/0xc

Use NUMA_NO_NODE hint instead of using the current node for events
not bound to CPUs.

Fixes: 855ab61c16 ("coresight: tmc-etr: Refactor function tmc_etr_setup_perf_buf()")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190620221237.3536-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:13 +02:00
Suzuki K Poulose d881f63290 coresight: etb10: Do not call smp_processor_id from preemptible
commit 730766bae3 upstream.

During a perf session we try to allocate buffers on the "node" associated
with the CPU the event is bound to. If it is not bound to a CPU, we
use the current CPU node, using smp_processor_id(). However this is unsafe
in a pre-emptible context and could generate the splats as below :

 BUG: using smp_processor_id() in preemptible [00000000] code: perf/2544

Use NUMA_NO_NODE hint instead of using the current node for events
not bound to CPUs.

Fixes: 2997aa4063 ("coresight: etb10: implementing AUX API")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: stable <stable@vger.kernel.org> # 4.6+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20190620221237.3536-5-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:13 +02:00
Dan Carpenter 3204bd0c8b coresight: Potential uninitialized variable in probe()
commit 0530ef6b41 upstream.

The "drvdata->atclk" clock is optional, but if it gets set to an error
pointer then we're accidentally return an uninitialized variable instead
of success.

Fixes: 78e6427b4e ("coresight: funnel: Support static funnel")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190620221237.3536-6-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:13 +02:00
Fabrice Gasnier 26a202b539 iio: adc: stm32-adc: add missing vdda-supply
commit 7685010fca upstream.

Add missing vdda-supply, analog power supply, to STM32 ADC. When vdda is
an independent supply, it needs to be properly turned on or off to supply
the ADC.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Fixes: 1add698802 ("iio: adc: Add support for STM32 ADC core").
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:12 +02:00
Todd Kjos f18e68e69f binder: return errors from buffer copy functions
commit bb4a2e48d5 upstream.

The buffer copy functions assumed the caller would ensure
correct alignment and that the memory to be copied was
completely within the binder buffer. There have been
a few cases discovered by syzkallar where a malformed
transaction created by a user could violated the
assumptions and resulted in a BUG_ON.

The fix is to remove the BUG_ON and always return the
error to be handled appropriately by the caller.

Acked-by: Martijn Coenen <maco@android.com>
Reported-by: syzbot+3ae18325f96190606754@syzkaller.appspotmail.com
Fixes: bde4a19fc0 ("binder: use userspace pointer as base of buffer space")
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Todd Kjos <tkjos@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:12 +02:00
Todd Kjos 4f4a26947c binder: fix memory leak in error path
commit 1909a671db upstream.

syzkallar found a 32-byte memory leak in a rarely executed error
case. The transaction complete work item was not freed if put_user()
failed when writing the BR_TRANSACTION_COMPLETE to the user command
buffer. Fixed by freeing it before put_user() is called.

Reported-by: syzbot+182ce46596c3f2e1eb24@syzkaller.appspotmail.com
Signed-off-by: Todd Kjos <tkjos@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:12 +02:00
Nick Desaulniers d003726ebb lkdtm: support llvm-objcopy
commit e9e08a0738 upstream.

With CONFIG_LKDTM=y and make OBJCOPY=llvm-objcopy, llvm-objcopy errors:
llvm-objcopy: error: --set-section-flags=.text conflicts with
--rename-section=.text=.rodata

Rather than support setting flags then renaming sections vs renaming
then setting flags, it's simpler to just change both at the same time
via --rename-section. Adding the load flag is required for GNU objcopy
to mark .rodata Type as PROGBITS after the rename.

This can be verified with:
$ readelf -S drivers/misc/lkdtm/rodata_objcopy.o
...
Section Headers:
  [Nr] Name              Type             Address           Offset
       Size              EntSize          Flags  Link  Info  Align
...
  [ 1] .rodata           PROGBITS         0000000000000000  00000040
       0000000000000004  0000000000000000   A       0     0     4
...

Which shows that .text is now renamed .rodata, the alloc flag A is set,
the type is PROGBITS, and the section is not flagged as writeable W.

Cc: stable@vger.kernel.org
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=24554
Link: https://github.com/ClangBuiltLinux/linux/issues/448
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Suggested-by: Alan Modra <amodra@gmail.com>
Suggested-by: Jordan Rupprect <rupprecht@google.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:12 +02:00
Sebastian Parschauer f49855f4fa HID: Add another Primax PIXART OEM mouse quirk
commit 4c12954965 upstream.

The PixArt OEM mice are known for disconnecting every minute in
runlevel 1 or 3 if they are not always polled. So add quirk
ALWAYS_POLL for this Alienware branded Primax mouse as well.

Daniel Schepler (@dschepler) reported and tested the quirk.
Reference: https://github.com/sriemer/fix-linux-mouse/issues/15

Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de>
CC: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:12 +02:00
Sergio Paracuellos 7ce8bd802d staging: mt7621-pci: fix PCIE_FTS_NUM_LO macro
commit 0ae0cf509d upstream.

Add missing parenthesis to PCIE_FTS_NUM_LO macro to do the
same it was being done in original code.

Fixes: a4b2eb912b ("staging: mt7621-pci: rewrite RC FTS configuration")
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:12 +02:00
Ian Abbott f0f909a19b staging: comedi: amplc_pci230: fix null pointer deref on interrupt
commit 7379e6baed upstream.

The interrupt handler `pci230_interrupt()` causes a null pointer
dereference for a PCI260 card.  There is no analog output subdevice for
a PCI260.  The `dev->write_subdev` subdevice pointer and therefore the
`s_ao` subdevice pointer variable will be `NULL` for a PCI260.  The
following call near the end of the interrupt handler results in the null
pointer dereference for a PCI260:

	comedi_handle_events(dev, s_ao);

Fix it by only calling the above function if `s_ao` is valid.

Note that the other uses of `s_ao` in the calls
`pci230_handle_ao_nofifo(dev, s_ao);` and `pci230_handle_ao_fifo(dev,
s_ao);` will never be reached for a PCI260, so they are safe.

Fixes: 39064f2328 ("staging: comedi: amplc_pci230: use comedi_handle_events()")
Cc: <stable@vger.kernel.org> # v3.19+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:12 +02:00
Stefan Wahren e937d42fb0 staging: bcm2835-camera: Restore return behavior of ctrl_set_bitrate()
commit f816db1dc1 upstream.

The commit 52c4dfcead ("Staging: vc04_services: Cleanup in
ctrl_set_bitrate()") changed the return behavior of ctrl_set_bitrate().
We cannot do this because of a bug in the firmware, which breaks probing
of bcm2835-camera:

    bcm2835-v4l2: mmal_init: failed to set all camera controls: -3
    Cleanup: Destroy video encoder
    Cleanup: Destroy image encoder
    Cleanup: Destroy video render
    Cleanup: Destroy camera
    bcm2835-v4l2: bcm2835_mmal_probe: mmal init failed: -3
    bcm2835-camera: probe of bcm2835-camera failed with error -3

So restore the old behavior, add an explaining comment and a debug message
to verify that the bug has been fixed in firmware.

Fixes: 52c4dfcead ("Staging: vc04_services: Cleanup in ctrl_set_bitrate()")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Cc: stable <stable@vger.kernel.org>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:11 +02:00
Ajay Singh df73c9370e staging: wilc1000: fix error path cleanup in wilc_wlan_initialize()
commit 6419f818ab upstream.

For the error path in wilc_wlan_initialize(), the resources are not
cleanup in the correct order. Reverted the previous changes and use the
correct order to free during error condition.

Fixes: b46d68825c ("staging: wilc1000: remove COMPLEMENT_BOOT")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:11 +02:00
Ian Abbott 99e5f88e3e staging: comedi: dt282x: fix a null pointer deref on interrupt
commit b8336be66d upstream.

The interrupt handler `dt282x_interrupt()` causes a null pointer
dereference for those supported boards that have no analog output
support.  For these boards, `dev->write_subdev` will be `NULL` and
therefore the `s_ao` subdevice pointer variable will be `NULL`.  In that
case, the following call near the end of the interrupt handler results
in a null pointer dereference:

	comedi_handle_events(dev, s_ao);

Fix it by only calling the above function if `s_ao` is valid.

(There are other uses of `s_ao` by the interrupt handler that may or may
not be reached depending on values of hardware registers.  Trust that
they are reliable for now.)

Note:
commit 4f6f009b20 ("staging: comedi: dt282x: use comedi_handle_events()")
propagates an earlier error from
commit f21c74fa4c ("staging: comedi: dt282x: use cfc_handle_events()").

Fixes: 4f6f009b20 ("staging: comedi: dt282x: use comedi_handle_events()")
Cc: <stable@vger.kernel.org> # v3.19+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:11 +02:00
Christian Lamparter 2306902921 p54: fix crash during initialization
commit 1645ab9319 upstream.

This patch fixes a crash that got introduced when the
mentioned patch replaced  the direct list_head access
with skb_peek_tail(). When the device is starting up,
there are  no entries in  the queue, so previously to
"Use skb_peek_tail() instead..." the target_skb would
end up as the  tail and head pointer which then could
be used by __skb_queue_after to fill the empty queue.

With skb_peek_tail() in its place will instead just
return NULL which then causes a crash in the
__skb_queue_after().

| BUG: unable to handle kernel NULL pointer dereference at 000000
| #PF error: [normal kernel read fault]
| PGD 0 P4D 0
| Oops: 0000 [#1] SMP PTI
| CPU: 0 PID: 12 Comm: kworker/0:1 Tainted: GO   5.1.0-rc7-wt+ #218
| Hardware name: MSI MS-7816/Z87-G43 (MS-7816), BIOS V1.11 05/09/2015
| Workqueue: events request_firmware_work_func
| RIP: 0010:p54_tx_pending+0x10f/0x1b0 [p54common]
| Code: 78 06 80 78 28 00 74 6d <48> 8b 07 49 89 7c 24 08 49 89 04 24 4
| RSP: 0018:ffffa81c81927d90 EFLAGS: 00010086
| RAX: ffff9bbaaf131048 RBX: 0000000000020670 RCX: 0000000000020264
| RDX: ffff9bbaa976d660 RSI: 0000000000000202 RDI: 0000000000000000
| RBP: ffff9bbaa976d620 R08: 00000000000006c0 R09: ffff9bbaa976d660
| R10: 0000000000000000 R11: ffffe8480dbc5900 R12: ffff9bbb45e87700
| R13: ffff9bbaa976d648 R14: ffff9bbaa976d674 R15: ffff9bbaaf131048
| FS:  0000000000000000(0000) GS:ffff9bbb5ec00000(0000) knlGS:00000
| CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
| CR2: 0000000000000000 CR3: 00000003695fc003 CR4: 00000000001606f0
| Call Trace:
|  p54_download_eeprom+0xbe/0x120 [p54common]
|  p54_read_eeprom+0x7f/0xc0 [p54common]
|  p54u_load_firmware_cb+0xe0/0x160 [p54usb]
|  request_firmware_work_func+0x42/0x80
|  process_one_work+0x1f5/0x3f0
|  worker_thread+0x28/0x3c0

Cc: stable@vger.kernel.org
Fixes: e3554197fc ("p54: Use skb_peek_tail() instead of direct head pointer accesses.")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:11 +02:00
Nikolaus Voss 99189d80bb drivers/usb/typec/tps6598x.c: fix 4CC cmd write
commit 2681795b5e upstream.

Writing 4CC commands with tps6598x_write_4cc() already has
a pointer arg, don't reference it when using as arg to
tps6598x_block_write(). Correcting this enforces the constness
of the pointer to propagate to tps6598x_block_write(), so add
the const qualifier there to avoid the warning.

Fixes: 0a4c005bd1 ("usb: typec: driver for TI TPS6598x USB Power Delivery controllers")
Signed-off-by: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:11 +02:00
Nikolaus Voss 582aa3acf0 drivers/usb/typec/tps6598x.c: fix portinfo width
commit 05da75fc65 upstream.

Portinfo bit field is 3 bits wide, not 2 bits. This led to
a wrong driver configuration for some tps6598x configurations.

Fixes: 0a4c005bd1 ("usb: typec: driver for TI TPS6598x USB Power Delivery controllers")
Signed-off-by: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:11 +02:00
Yoshihiro Shimoda df850cc6f2 usb: renesas_usbhs: add a workaround for a race condition of workqueue
commit b2357839c5 upstream.

The old commit 6e4b74e469 ("usb: renesas: fix scheduling in atomic
context bug") fixed an atomic issue by using workqueue for the shdmac
dmaengine driver. However, this has a potential race condition issue
between the work pending and usbhsg_ep_free_request() in gadget mode.
When usbhsg_ep_free_request() is called while pending the queue,
since the work_struct will be freed and then the work handler is
called, kernel panic happens on process_one_work().

To fix the issue, if we could call cancel_work_sync() at somewhere
before the free request, it could be easy. However,
the usbhsg_ep_free_request() is called on atomic (e.g. f_ncm driver
calls free request via gether_disconnect()).

For now, almost all users are having "USB-DMAC" and the DMAengine
driver can be used on atomic. So, this patch adds a workaround for
a race condition to call the DMAengine APIs without the workqueue.

This means we still have TODO on shdmac environment (SH7724), but
since it doesn't have SMP, the race condition might not happen.

Fixes: ab330cf388 ("usb: renesas_usbhs: add support for USB-DMAC")
Cc: <stable@vger.kernel.org> # v4.1+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:11 +02:00
Martin Blumenstingl 302b3d594c usb: dwc2: use a longer AHB idle timeout in dwc2_core_reset()
commit dfc4fdebc5 upstream.

Use a 10000us AHB idle timeout in dwc2_core_reset() and make it
consistent with the other "wait for AHB master IDLE state" ocurrences.

This fixes a problem for me where dwc2 would not want to initialize when
updating to 4.19 on a MIPS Lantiq VRX200 SoC. dwc2 worked fine with
4.14.
Testing on my board shows that it takes 180us until AHB master IDLE
state is signalled. The very old vendor driver for this SoC (ifxhcd)
used a 1 second timeout.
Use the same timeout that is used everywhere when polling for
GRSTCTL_AHBIDLE instead of using a timeout that "works for one board"
(180us in my case) to have consistent behavior across the dwc2 driver.

Cc: linux-stable <stable@vger.kernel.org> # 4.19+
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:10 +02:00
Kiruthika Varadarajan 9b0bb09062 usb: gadget: ether: Fix race between gether_disconnect and rx_submit
commit d29fcf7078 upstream.

On spin lock release in rx_submit, gether_disconnect get a chance to
run, it makes port_usb NULL, rx_submit access NULL port USB, hence null
pointer crash.

Fixed by releasing the lock in rx_submit after port_usb is used.

Fixes: 2b3d942c48 ("usb ethernet gadget: split out network core")
Cc: <stable@vger.kernel.org>
Signed-off-by: Kiruthika Varadarajan <Kiruthika.Varadarajan@harman.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:10 +02:00
Fei Yang 065700301d usb: gadget: f_fs: data_len used before properly set
commit 4833a94eb3 upstream.

The following line of code in function ffs_epfile_io is trying to set
flag io_data->use_sg in case buffer required is larger than one page.

    io_data->use_sg = gadget->sg_supported && data_len > PAGE_SIZE;

However at this point of time the variable data_len has not been set
to the proper buffer size yet. The consequence is that io_data->use_sg
is always set regardless what buffer size really is, because the condition
(data_len > PAGE_SIZE) is effectively an unsigned comparison between
-EINVAL and PAGE_SIZE which would always result in TRUE.

Fixes: 772a7a724f ("usb: gadget: f_fs: Allow scatter-gather buffers")
Signed-off-by: Fei Yang <fei.yang@intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:10 +02:00
Alan Stern 9baa5b4925 p54usb: Fix race between disconnect and firmware loading
commit 6e41e2257f upstream.

The syzbot fuzzer found a bug in the p54 USB wireless driver.  The
issue involves a race between disconnect and the firmware-loader
callback routine, and it has several aspects.

One big problem is that when the firmware can't be loaded, the
callback routine tries to unbind the driver from the USB _device_ (by
calling device_release_driver) instead of from the USB _interface_ to
which it is actually bound (by calling usb_driver_release_interface).

The race involves access to the private data structure.  The driver's
disconnect handler waits for a completion that is signalled by the
firmware-loader callback routine.  As soon as the completion is
signalled, you have to assume that the private data structure may have
been deallocated by the disconnect handler -- even if the firmware was
loaded without errors.  However, the callback routine does access the
private data several times after that point.

Another problem is that, in order to ensure that the USB device
structure hasn't been freed when the callback routine runs, the driver
takes a reference to it.  This isn't good enough any more, because now
that the callback routine calls usb_driver_release_interface, it has
to ensure that the interface structure hasn't been freed.

Finally, the driver takes an unnecessary reference to the USB device
structure in the probe function and drops the reference in the
disconnect handler.  This extra reference doesn't accomplish anything,
because the USB core already guarantees that a device structure won't
be deallocated while a driver is still bound to any of its interfaces.

To fix these problems, this patch makes the following changes:

	Call usb_driver_release_interface() rather than
	device_release_driver().

	Don't signal the completion until after the important
	information has been copied out of the private data structure,
	and don't refer to the private data at all thereafter.

	Lock udev (the interface's parent) before unbinding the driver
	instead of locking udev->parent.

	During the firmware loading process, take a reference to the
	USB interface instead of the USB device.

	Don't take an unnecessary reference to the device during probe
	(and then don't drop it during disconnect).

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: syzbot+200d4bb11b23d929335f@syzkaller.appspotmail.com
CC: <stable@vger.kernel.org>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:10 +02:00
Oliver Barta 5a5097cfb0 Revert "serial: 8250: Don't service RX FIFO if interrupts are disabled"
commit 3f2640ed7b upstream.

This reverts commit 2e9fe53910.

Reading LSR unconditionally but processing the error flags only if
UART_IIR_RDI bit was set before in IIR may lead to a loss of transmission
error information on UARTs where the transmission error flags are cleared
by a read of LSR. Information are lost in case an error is detected right
before the read of LSR while processing e.g. an UART_IIR_THRI interrupt.

Signed-off-by: Oliver Barta <o.barta89@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: 2e9fe53910 ("serial: 8250: Don't service RX FIFO if interrupts are disabled")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:10 +02:00
Jörgen Storvist 6517295171 USB: serial: option: add support for GosunCn ME3630 RNDIS mode
commit aed2a26283 upstream.

Added USB IDs for GosunCn ME3630 cellular module in RNDIS mode.

T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=03 Dev#= 18 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=19d2 ProdID=0601 Rev=03.18
S:  Manufacturer=Android
S:  Product=Android
S:  SerialNumber=b950269c
C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
I:  If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
I:  If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option

Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:10 +02:00
Andreas Fritiofson 3377dc6fc4 USB: serial: ftdi_sio: add ID for isodebug v1
commit f8377eff54 upstream.

This adds the vid:pid of the isodebug v1 isolated JTAG/SWD+UART. Only the
second channel is available for use as a serial port.

Signed-off-by: Andreas Fritiofson <andreas.fritiofson@unjo.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:10 +02:00
Brian Norris 94ae2c68c4 mwifiex: Don't abort on small, spec-compliant vendor IEs
commit 63d7ef3610 upstream.

Per the 802.11 specification, vendor IEs are (at minimum) only required
to contain an OUI. A type field is also included in ieee80211.h (struct
ieee80211_vendor_ie) but doesn't appear in the specification. The
remaining fields (subtype, version) are a convention used in WMM
headers.

Thus, we should not reject vendor-specific IEs that have only the
minimum length (3 bytes) -- we should skip over them (since we only want
to match longer IEs, that match either WMM or WPA formats). We can
reject elements that don't have the minimum-required 3 byte OUI.

While we're at it, move the non-standard subtype and version fields into
the WMM structs, to avoid this confusion in the future about generic
"vendor header" attributes.

Fixes: 685c9b7750 ("mwifiex: Abort at too short BSS descriptor element")
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:09 +02:00
Andy Lutomirski 9dfd26354b Documentation/admin: Remove the vsyscall=native documentation
commit d974ffcfb7 upstream.

The vsyscall=native feature is gone -- remove the docs.

Fixes: 076ca272a1 ("x86/vsyscall/64: Drop "native" vsyscalls")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: stable@vger.kernel.org
Cc: Borislav Petkov <bp@alien8.de>
Cc: Kernel Hardening <kernel-hardening@lists.openwall.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/d77c7105eb4c57c1a95a95b6a5b8ba194a18e764.1561610354.git.luto@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:09 +02:00
Tim Chen 2833a74b37 Documentation: Add section about CPU vulnerabilities for Spectre
commit 6e88559470 upstream.

Add documentation for Spectre vulnerability and the mitigation mechanisms:

- Explain the problem and risks
- Document the mitigation mechanisms
- Document the command line controls
- Document the sysfs files

Co-developed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Co-developed-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:09 +02:00
Dianzhang Chen 2b73121a7f x86/tls: Fix possible spectre-v1 in do_get_thread_area()
commit 993773d11d upstream.

The index to access the threads tls array is controlled by userspace
via syscall: sys_ptrace(), hence leading to a potential exploitation
of the Spectre variant 1 vulnerability.

The index can be controlled from:
        ptrace -> arch_ptrace -> do_get_thread_area.

Fix this by sanitizing the user supplied index before using it to access
the p->thread.tls_array.

Signed-off-by: Dianzhang Chen <dianzhangchen0@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: hpa@zytor.com
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1561524630-3642-1-git-send-email-dianzhangchen0@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:09 +02:00
Dianzhang Chen d1ba61ae4b x86/ptrace: Fix possible spectre-v1 in ptrace_get_debugreg()
commit 31a2fbb390 upstream.

The index to access the threads ptrace_bps is controlled by userspace via
syscall: sys_ptrace(), hence leading to a potential exploitation of the
Spectre variant 1 vulnerability.

The index can be controlled from:
    ptrace -> arch_ptrace -> ptrace_get_debugreg.

Fix this by sanitizing the user supplied index before using it access
thread->ptrace_bps.

Signed-off-by: Dianzhang Chen <dianzhangchen0@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: hpa@zytor.com
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1561476617-3759-1-git-send-email-dianzhangchen0@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:09 +02:00
Song Liu 635d4fb7ea perf header: Assign proper ff->ph in perf_event__synthesize_features()
commit c952b35f4b upstream.

bpf/btf write_* functions need ff->ph->env.

With this missing, pipe-mode (perf record -o -)  would crash like:

Program terminated with signal SIGSEGV, Segmentation fault.

This patch assign proper ph value to ff.

Committer testing:

  (gdb) run record -o -
  Starting program: /root/bin/perf record -o -
  PERFILE2
  <SNIP start of perf.data headers>
  Thread 1 "perf" received signal SIGSEGV, Segmentation fault.
  __do_write_buf (size=4, buf=0x160, ff=0x7fffffff8f80) at util/header.c:126
  126		memcpy(ff->buf + ff->offset, buf, size);
  (gdb) bt
  #0  __do_write_buf (size=4, buf=0x160, ff=0x7fffffff8f80) at util/header.c:126
  #1  do_write (ff=ff@entry=0x7fffffff8f80, buf=buf@entry=0x160, size=4) at util/header.c:137
  #2  0x00000000004eddba in write_bpf_prog_info (ff=0x7fffffff8f80, evlist=<optimized out>) at util/header.c:912
  #3  0x00000000004f69d7 in perf_event__synthesize_features (tool=tool@entry=0x97cc00 <record>, session=session@entry=0x7fffe9c6d010,
      evlist=0x7fffe9cae010, process=process@entry=0x4435d0 <process_synthesized_event>) at util/header.c:3695
  #4  0x0000000000443c79 in record__synthesize (tail=tail@entry=false, rec=0x97cc00 <record>) at builtin-record.c:1214
  #5  0x0000000000444ec9 in __cmd_record (rec=0x97cc00 <record>, argv=<optimized out>, argc=0) at builtin-record.c:1435
  #6  cmd_record (argc=0, argv=<optimized out>) at builtin-record.c:2450
  #7  0x00000000004ae3e9 in run_builtin (p=p@entry=0x98e058 <commands+216>, argc=argc@entry=3, argv=0x7fffffffd670) at perf.c:304
  #8  0x000000000042eded in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:356
  #9  run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:400
  #10 main (argc=3, argv=<optimized out>) at perf.c:522
  (gdb)

After the patch the SEGSEGV is gone.

Reported-by: David Carrillo Cisneros <davidca@fb.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: kernel-team@fb.com
Cc: stable@vger.kernel.org # v5.1+
Fixes: 606f972b13 ("perf bpf: Save bpf_prog_info information as headers to perf.data")
Link: http://lkml.kernel.org/r/20190620010453.4118689-1-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:09 +02:00
Adrian Hunter af31a530e7 perf thread-stack: Fix thread stack return from kernel for kernel-only case
commit 97860b483c upstream.

Commit f08046cb30 ("perf thread-stack: Represent jmps to the start of a
different symbol") had the side-effect of introducing more stack entries
before return from kernel space.

When user space is also traced, those entries are popped before entry to
user space, but when user space is not traced, they get stuck at the
bottom of the stack, making the stack grow progressively larger.

Fix by detecting a return-from-kernel branch type, and popping kernel
addresses from the stack then.

Note, the problem and fix affect the exported Call Graph / Tree but not
the callindent option used by "perf script --call-trace".

Example:

  perf-with-kcore record example -e intel_pt//k -- ls
  perf-with-kcore script example --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py example.db branches calls
  ~/libexec/perf-core/scripts/python/exported-sql-viewer.py example.db

  Menu option: Reports -> Context-Sensitive Call Graph

  Before: (showing Call Path column only)

    Call Path
    ▶ perf
    ▼ ls
      ▼ 12111:12111
        ▶ setup_new_exec
        ▶ __task_pid_nr_ns
        ▶ perf_event_pid_type
        ▶ perf_event_comm_output
        ▶ perf_iterate_ctx
        ▶ perf_iterate_sb
        ▶ perf_event_comm
        ▶ __set_task_comm
        ▶ load_elf_binary
        ▶ search_binary_handler
        ▶ __do_execve_file.isra.41
        ▶ __x64_sys_execve
        ▶ do_syscall_64
        ▼ entry_SYSCALL_64_after_hwframe
          ▼ swapgs_restore_regs_and_return_to_usermode
            ▼ native_iret
              ▶ error_entry
              ▶ do_page_fault
              ▼ error_exit
                ▼ retint_user
                  ▶ prepare_exit_to_usermode
                  ▼ native_iret
                    ▶ error_entry
                    ▶ do_page_fault
                    ▼ error_exit
                      ▼ retint_user
                        ▶ prepare_exit_to_usermode
                        ▼ native_iret
                          ▶ error_entry
                          ▶ do_page_fault
                          ▼ error_exit
                            ▼ retint_user
                              ▶ prepare_exit_to_usermode
                              ▶ native_iret

  After: (showing Call Path column only)

    Call Path
    ▶ perf
    ▼ ls
      ▼ 12111:12111
        ▶ setup_new_exec
        ▶ __task_pid_nr_ns
        ▶ perf_event_pid_type
        ▶ perf_event_comm_output
        ▶ perf_iterate_ctx
        ▶ perf_iterate_sb
        ▶ perf_event_comm
        ▶ __set_task_comm
        ▶ load_elf_binary
        ▶ search_binary_handler
        ▶ __do_execve_file.isra.41
        ▶ __x64_sys_execve
        ▶ do_syscall_64
        ▶ entry_SYSCALL_64_after_hwframe
        ▶ page_fault
        ▼ entry_SYSCALL_64
          ▼ do_syscall_64
            ▶ __x64_sys_brk
            ▶ __x64_sys_access
            ▶ __x64_sys_openat
            ▶ __x64_sys_newfstat
            ▶ __x64_sys_mmap
            ▶ __x64_sys_close
            ▶ __x64_sys_read
            ▶ __x64_sys_mprotect
            ▶ __x64_sys_arch_prctl
            ▶ __x64_sys_munmap
            ▶ exit_to_usermode_loop
            ▶ __x64_sys_set_tid_address
            ▶ __x64_sys_set_robust_list
            ▶ __x64_sys_rt_sigaction
            ▶ __x64_sys_rt_sigprocmask
            ▶ __x64_sys_prlimit64
            ▶ __x64_sys_statfs
            ▶ __x64_sys_ioctl
            ▶ __x64_sys_getdents64
            ▶ __x64_sys_write
            ▶ __x64_sys_exit_group

Committer notes:

The first arg to the perf-with-kcore needs to be the same for the
'record' and 'script' lines, otherwise we'll record the perf.data file
and kcore_dir/ files in one directory ('example') to then try to use it
from the 'bep' directory, fix the instructions above it so that both use
'example'.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Fixes: f08046cb30 ("perf thread-stack: Represent jmps to the start of a different symbol")
Link: http://lkml.kernel.org/r/20190619064429.14940-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:08 +02:00
John Garry 4a3e679c53 perf pmu: Fix uncore PMU alias list for ARM64
commit 599ee18f07 upstream.

In commit 292c34c102 ("perf pmu: Fix core PMU alias list for X86
platform"), we fixed the issue of CPU events being aliased to uncore
events.

Fix this same issue for ARM64, since the said commit left the (broken)
behaviour untouched for ARM64.

Signed-off-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Cc: stable@vger.kernel.org
Fixes: 292c34c102 ("perf pmu: Fix core PMU alias list for X86 platform")
Link: http://lkml.kernel.org/r/1560521283-73314-2-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:08 +02:00
Adrian Hunter 66562fc1a2 perf intel-pt: Fix itrace defaults for perf script intel-pt documentation
commit a2d8a1585e upstream.

Fix intel-pt documentation to reflect the change of itrace defaults for
perf script.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 4eb0681571 ("perf script: Make itrace script default to all calls")
Link: http://lkml.kernel.org/r/20190520113728.14389-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:08 +02:00
Adrian Hunter dacc61d9aa perf auxtrace: Fix itrace defaults for perf script
commit 355200e0f6 upstream.

Commit 4eb0681571 ("perf script: Make itrace script default to all
calls") does not work for the case when '--itrace' only is used, because
default_no_sample is not being passed.

Example:

 Before:

  $ perf record -e intel_pt/cyc/u ls
  $ perf script --itrace > cmp1.txt
  $ perf script --itrace=cepwx > cmp2.txt
  $ diff -sq cmp1.txt cmp2.txt
  Files cmp1.txt and cmp2.txt differ

 After:

  $ perf script --itrace > cmp1.txt
  $ perf script --itrace=cepwx > cmp2.txt
  $ diff -sq cmp1.txt cmp2.txt
  Files cmp1.txt and cmp2.txt are identical

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 4eb0681571 ("perf script: Make itrace script default to all calls")
Link: http://lkml.kernel.org/r/20190520113728.14389-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:08 +02:00
Adrian Hunter 8fe0dffdbd perf intel-pt: Fix itrace defaults for perf script
commit 26f19c2eb7 upstream.

Commit 4eb0681571 ("perf script: Make itrace script default to all
calls") does not work because 'use_browser' is being used to determine
whether to default to periodic sampling (i.e. better for perf report).
The result is that nothing but CBR events display for perf script when
no --itrace option is specified.

Fix by using 'default_no_sample' and 'inject' instead.

Example:

 Before:

  $ perf record -e intel_pt/cyc/u ls
  $ perf script > cmp1.txt
  $ perf script --itrace=cepwx > cmp2.txt
  $ diff -sq cmp1.txt cmp2.txt
  Files cmp1.txt and cmp2.txt differ

 After:

  $ perf script > cmp1.txt
  $ perf script --itrace=cepwx > cmp2.txt
  $ diff -sq cmp1.txt cmp2.txt
  Files cmp1.txt and cmp2.txt are identical

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v4.20+
Fixes: 90e457f7be ("perf tools: Add Intel PT support")
Link: http://lkml.kernel.org/r/20190520113728.14389-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:08 +02:00
Douglas Anderson 6975db1813 block, bfq: NULL out the bic when it's no longer valid
commit dbc3117d4c upstream.

In reboot tests on several devices we were seeing a "use after free"
when slub_debug or KASAN was enabled.  The kernel complained about:

  Unable to handle kernel paging request at virtual address 6b6b6c2b

...which is a classic sign of use after free under slub_debug.  The
stack crawl in kgdb looked like:

 0  test_bit (addr=<optimized out>, nr=<optimized out>)
 1  bfq_bfqq_busy (bfqq=<optimized out>)
 2  bfq_select_queue (bfqd=<optimized out>)
 3  __bfq_dispatch_request (hctx=<optimized out>)
 4  bfq_dispatch_request (hctx=<optimized out>)
 5  0xc056ef00 in blk_mq_do_dispatch_sched (hctx=0xed249440)
 6  0xc056f728 in blk_mq_sched_dispatch_requests (hctx=0xed249440)
 7  0xc0568d24 in __blk_mq_run_hw_queue (hctx=0xed249440)
 8  0xc0568d94 in blk_mq_run_work_fn (work=<optimized out>)
 9  0xc024c5c4 in process_one_work (worker=0xec6d4640, work=0xed249480)
 10 0xc024cff4 in worker_thread (__worker=0xec6d4640)

Digging in kgdb, it could be found that, though bfqq looked fine,
bfqq->bic had been freed.

Through further digging, I postulated that perhaps it is illegal to
access a "bic" (AKA an "icq") after bfq_exit_icq() had been called
because the "bic" can be freed at some point in time after this call
is made.  I confirmed that there certainly were cases where the exact
crashing code path would access the "bic" after bfq_exit_icq() had
been called.  Sspecifically I set the "bfqq->bic" to (void *)0x7 and
saw that the bic was 0x7 at the time of the crash.

To understand a bit more about why this crash was fairly uncommon (I
saw it only once in a few hundred reboots), you can see that much of
the time bfq_exit_icq_fbqq() fully frees the bfqq and thus it can't
access the ->bic anymore.  The only case it doesn't is if
bfq_put_queue() sees a reference still held.

However, even in the case when bfqq isn't freed, the crash is still
rare.  Why?  I tracked what happened to the "bic" after the exit
routine.  It doesn't get freed right away.  Rather,
put_io_context_active() eventually called put_io_context() which
queued up freeing on a workqueue.  The freeing then actually happened
later than that through call_rcu().  Despite all these delays, some
extra debugging showed that all the hoops could be jumped through in
time and the memory could be freed causing the original crash.  Phew!

To make a long story short, assuming it truly is illegal to access an
icq after the "exit_icq" callback is finished, this patch is needed.

Cc: stable@vger.kernel.org
Reviewed-by: Paolo Valente <paolo.valente@unimore.it>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:08 +02:00
Ming Lei c785529beb block: fix .bi_size overflow
commit 79d08f89bb upstream.

'bio->bi_iter.bi_size' is 'unsigned int', which at most hold 4G - 1
bytes.

Before 07173c3ec2 ("block: enable multipage bvecs"), one bio can
include very limited pages, and usually at most 256, so the fs bio
size won't be bigger than 1M bytes most of times.

Since we support multi-page bvec, in theory one fs bio really can
be added > 1M pages, especially in case of hugepage, or big writeback
with too many dirty pages. Then there is chance in which .bi_size
is overflowed.

Fixes this issue by using bio_full() to check if the added segment may
overflow .bi_size.

Cc: Liu Yiding <liuyd.fnst@cn.fujitsu.com>
Cc: kernel test robot <rong.a.chen@intel.com>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: linux-xfs@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 07173c3ec2 ("block: enable multipage bvecs")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:08 +02:00
Vadim Sukhomlinov a6d2786587 tpm: Fix TPM 1.2 Shutdown sequence to prevent future TPM operations
commit db4d8cb9c9 upstream.

TPM 2.0 Shutdown involve sending TPM2_Shutdown to TPM chip and disabling
future TPM operations. TPM 1.2 behavior was different, future TPM
operations weren't disabled, causing rare issues. This patch ensures
that future TPM operations are disabled.

Fixes: d1bd4a792d ("tpm: Issue a TPM2_Shutdown for TPM2 devices.")
Cc: stable@vger.kernel.org
Signed-off-by: Vadim Sukhomlinov <sukhomlinov@google.com>
[dianders: resolved merge conflicts with mainline]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:07 +02:00
Kees Cook 4cce48ae9e tpm: Actually fail on TPM errors during "get random"
commit 782779b60f upstream.

A "get random" may fail with a TPM error, but those codes were returned
as-is to the caller, which assumed the result was the number of bytes
that had been written to the target buffer, which could lead to a kernel
heap memory exposure and over-read.

This fixes tpm1_get_random() to mask positive TPM errors into -EIO, as
before.

[   18.092103] tpm tpm0: A TPM error (379) occurred attempting get random
[   18.092106] usercopy: Kernel memory exposure attempt detected from SLUB object 'kmalloc-64' (offset 0, size 379)!

Link: https://bugzilla.redhat.com/show_bug.cgi?id=1650989
Reported-by: Phil Baker <baker1tex@gmail.com>
Reported-by: Craig Robson <craig@zhatt.com>
Fixes: 7aee9c52d7 ("tpm: tpm1: rewrite tpm1_get_random() using tpm_buf structure")
Cc: Laura Abbott <labbott@redhat.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Tomas Winkler <tomas.winkler@intel.com>
Tested-by: Bartosz Szczepanek <bsz@semihalf.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:07 +02:00
Kailang Yang eaf775f75a ALSA: hda/realtek - Headphone Mic can't record after S3
commit d07a9a4f66 upstream.

Dell headset mode platform with ALC236.
It doesn't recording after system resume from S3.
S3 mode was deep. s2idle was not has this issue.
S3 deep will cut of codec power. So, the register will back to default
after resume back.
This patch will solve this issue.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:07 +02:00
Takashi Iwai 8b0ab7d35d ALSA: usb-audio: Fix parse of UAC2 Extension Units
commit ca95c7bf3d upstream.

Extension Unit (XU) is used to have a compatible layout with
Processing Unit (PU) on UAC1, and the usb-audio driver code assumed it
for parsing the descriptors.  Meanwhile, on UAC2, XU became slightly
incompatible with PU; namely, XU has a one-byte bmControls bitmap
while PU has two bytes bmControls bitmap.  This incompatibility
results in the read of a wrong address for the last iExtension field,
which ended up with an incorrect string for the mixer element name, as
recently reported for Focusrite Scarlett 18i20 device.

This patch corrects this misalignment by introducing a couple of new
macros and calling them depending on the descriptor type.

Fixes: 23caaf19b1 ("ALSA: usb-mixer: Add support for Audio Class v2.0")
Reported-by: Stefan Sauer <ensonic@hora-obscura.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:07 +02:00
Mauro Carvalho Chehab c8b4e545d1 media: stv0297: fix frequency range limit
commit b09a2ab2ba upstream.

There was a typo at the lower frequency limit for a DVB-C
card, causing the driver to fail while tuning channels at the
VHF range.

https://bugzilla.kernel.org/show_bug.cgi?id=202083

Fixes: f1b1eabff0 ("media: dvb: represent min/max/step/tolerance freqs in Hz")
Reported-by: Ari Kohtamäki <ari.kohtamaki@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:07 +02:00
Steven J. Magnani 56a3c35cd1 udf: Fix incorrect final NOT_ALLOCATED (hole) extent length
commit fa33cdbf3e upstream.

In some cases, using the 'truncate' command to extend a UDF file results
in a mismatch between the length of the file's extents (specifically, due
to incorrect length of the final NOT_ALLOCATED extent) and the information
(file) length. The discrepancy can prevent other operating systems
(i.e., Windows 10) from opening the file.

Two particular errors have been observed when extending a file:

1. The final extent is larger than it should be, having been rounded up
   to a multiple of the block size.

B. The final extent is not shorter than it should be, due to not having
   been updated when the file's information length was increased.

[JK: simplified udf_do_extend_final_block(), fixed up some types]

Fixes: 2c948b3f86 ("udf: Avoid IO in udf_clear_inode")
CC: stable@vger.kernel.org
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Link: https://lore.kernel.org/r/1561948775-5878-1-git-send-email-steve@digidescorp.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:06 +02:00
Hongjie Fang 787716e568 fscrypt: don't set policy for a dead directory
commit 5858bdad4d upstream.

The directory may have been removed when entering
fscrypt_ioctl_set_policy().  If so, the empty_dir() check will return
error for ext4 file system.

ext4_rmdir() sets i_size = 0, then ext4_empty_dir() reports an error
because 'inode->i_size < EXT4_DIR_REC_LEN(1) + EXT4_DIR_REC_LEN(2)'.  If
the fs is mounted with errors=panic, it will trigger a panic issue.

Add the check IS_DEADDIR() to fix this problem.

Fixes: 9bd8212f98 ("ext4 crypto: add encryption policy and password salt support")
Cc: <stable@vger.kernel.org> # v4.1+
Signed-off-by: Hongjie Fang <hongjiefang@asrmicro.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:06 +02:00
Christophe Leroy 587c49c7c4 crypto: talitos - rename alternative AEAD algos.
commit a1a42f8401 upstream.

The talitos driver has two ways to perform AEAD depending on the
HW capability. Some HW support both. It is needed to give them
different names to distingish which one it is for instance when
a test fails.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 7405c8d7ff ("crypto: talitos - templates for AEAD using HMAC_SNOOP_NO_AFEU")
Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:06 +02:00
Eric Biggers eff1b6abd9 crypto: lrw - use correct alignmask
commit 20a0f97613 upstream.

Commit c778f96bf3 ("crypto: lrw - Optimize tweak computation")
incorrectly reduced the alignmask of LRW instances from
'__alignof__(u64) - 1' to '__alignof__(__be32) - 1'.

However, xor_tweak() and setkey() assume that the data and key,
respectively, are aligned to 'be128', which has u64 alignment.

Fix the alignmask to be at least '__alignof__(be128) - 1'.

Fixes: c778f96bf3 ("crypto: lrw - Optimize tweak computation")
Cc: <stable@vger.kernel.org> # v4.20+
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-14 08:01:06 +02:00
513 changed files with 6008 additions and 2439 deletions
@@ -9,5 +9,6 @@ are configurable at compile, boot or run time.
.. toctree::
:maxdepth: 1
spectre
l1tf
mds
@@ -0,0 +1,697 @@
.. SPDX-License-Identifier: GPL-2.0
Spectre Side Channels
=====================
Spectre is a class of side channel attacks that exploit branch prediction
and speculative execution on modern CPUs to read memory, possibly
bypassing access controls. Speculative execution side channel exploits
do not modify memory but attempt to infer privileged data in the memory.
This document covers Spectre variant 1 and Spectre variant 2.
Affected processors
-------------------
Speculative execution side channel methods affect a wide range of modern
high performance processors, since most modern high speed processors
use branch prediction and speculative execution.
The following CPUs are vulnerable:
- Intel Core, Atom, Pentium, and Xeon processors
- AMD Phenom, EPYC, and Zen processors
- IBM POWER and zSeries processors
- Higher end ARM processors
- Apple CPUs
- Higher end MIPS CPUs
- Likely most other high performance CPUs. Contact your CPU vendor for details.
Whether a processor is affected or not can be read out from the Spectre
vulnerability files in sysfs. See :ref:`spectre_sys_info`.
Related CVEs
------------
The following CVE entries describe Spectre variants:
============= ======================= =================
CVE-2017-5753 Bounds check bypass Spectre variant 1
CVE-2017-5715 Branch target injection Spectre variant 2
============= ======================= =================
Problem
-------
CPUs use speculative operations to improve performance. That may leave
traces of memory accesses or computations in the processor's caches,
buffers, and branch predictors. Malicious software may be able to
influence the speculative execution paths, and then use the side effects
of the speculative execution in the CPUs' caches and buffers to infer
privileged data touched during the speculative execution.
Spectre variant 1 attacks take advantage of speculative execution of
conditional branches, while Spectre variant 2 attacks use speculative
execution of indirect branches to leak privileged memory.
See :ref:`[1] <spec_ref1>` :ref:`[5] <spec_ref5>` :ref:`[7] <spec_ref7>`
:ref:`[10] <spec_ref10>` :ref:`[11] <spec_ref11>`.
Spectre variant 1 (Bounds Check Bypass)
---------------------------------------
The bounds check bypass attack :ref:`[2] <spec_ref2>` takes advantage
of speculative execution that bypasses conditional branch instructions
used for memory access bounds check (e.g. checking if the index of an
array results in memory access within a valid range). This results in
memory accesses to invalid memory (with out-of-bound index) that are
done speculatively before validation checks resolve. Such speculative
memory accesses can leave side effects, creating side channels which
leak information to the attacker.
There are some extensions of Spectre variant 1 attacks for reading data
over the network, see :ref:`[12] <spec_ref12>`. However such attacks
are difficult, low bandwidth, fragile, and are considered low risk.
Spectre variant 2 (Branch Target Injection)
-------------------------------------------
The branch target injection attack takes advantage of speculative
execution of indirect branches :ref:`[3] <spec_ref3>`. The indirect
branch predictors inside the processor used to guess the target of
indirect branches can be influenced by an attacker, causing gadget code
to be speculatively executed, thus exposing sensitive data touched by
the victim. The side effects left in the CPU's caches during speculative
execution can be measured to infer data values.
.. _poison_btb:
In Spectre variant 2 attacks, the attacker can steer speculative indirect
branches in the victim to gadget code by poisoning the branch target
buffer of a CPU used for predicting indirect branch addresses. Such
poisoning could be done by indirect branching into existing code,
with the address offset of the indirect branch under the attacker's
control. Since the branch prediction on impacted hardware does not
fully disambiguate branch address and uses the offset for prediction,
this could cause privileged code's indirect branch to jump to a gadget
code with the same offset.
The most useful gadgets take an attacker-controlled input parameter (such
as a register value) so that the memory read can be controlled. Gadgets
without input parameters might be possible, but the attacker would have
very little control over what memory can be read, reducing the risk of
the attack revealing useful data.
One other variant 2 attack vector is for the attacker to poison the
return stack buffer (RSB) :ref:`[13] <spec_ref13>` to cause speculative
subroutine return instruction execution to go to a gadget. An attacker's
imbalanced subroutine call instructions might "poison" entries in the
return stack buffer which are later consumed by a victim's subroutine
return instructions. This attack can be mitigated by flushing the return
stack buffer on context switch, or virtual machine (VM) exit.
On systems with simultaneous multi-threading (SMT), attacks are possible
from the sibling thread, as level 1 cache and branch target buffer
(BTB) may be shared between hardware threads in a CPU core. A malicious
program running on the sibling thread may influence its peer's BTB to
steer its indirect branch speculations to gadget code, and measure the
speculative execution's side effects left in level 1 cache to infer the
victim's data.
Attack scenarios
----------------
The following list of attack scenarios have been anticipated, but may
not cover all possible attack vectors.
1. A user process attacking the kernel
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
The attacker passes a parameter to the kernel via a register or
via a known address in memory during a syscall. Such parameter may
be used later by the kernel as an index to an array or to derive
a pointer for a Spectre variant 1 attack. The index or pointer
is invalid, but bound checks are bypassed in the code branch taken
for speculative execution. This could cause privileged memory to be
accessed and leaked.
For kernel code that has been identified where data pointers could
potentially be influenced for Spectre attacks, new "nospec" accessor
macros are used to prevent speculative loading of data.
Spectre variant 2 attacker can :ref:`poison <poison_btb>` the branch
target buffer (BTB) before issuing syscall to launch an attack.
After entering the kernel, the kernel could use the poisoned branch
target buffer on indirect jump and jump to gadget code in speculative
execution.
If an attacker tries to control the memory addresses leaked during
speculative execution, he would also need to pass a parameter to the
gadget, either through a register or a known address in memory. After
the gadget has executed, he can measure the side effect.
The kernel can protect itself against consuming poisoned branch
target buffer entries by using return trampolines (also known as
"retpoline") :ref:`[3] <spec_ref3>` :ref:`[9] <spec_ref9>` for all
indirect branches. Return trampolines trap speculative execution paths
to prevent jumping to gadget code during speculative execution.
x86 CPUs with Enhanced Indirect Branch Restricted Speculation
(Enhanced IBRS) available in hardware should use the feature to
mitigate Spectre variant 2 instead of retpoline. Enhanced IBRS is
more efficient than retpoline.
There may be gadget code in firmware which could be exploited with
Spectre variant 2 attack by a rogue user process. To mitigate such
attacks on x86, Indirect Branch Restricted Speculation (IBRS) feature
is turned on before the kernel invokes any firmware code.
2. A user process attacking another user process
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
A malicious user process can try to attack another user process,
either via a context switch on the same hardware thread, or from the
sibling hyperthread sharing a physical processor core on simultaneous
multi-threading (SMT) system.
Spectre variant 1 attacks generally require passing parameters
between the processes, which needs a data passing relationship, such
as remote procedure calls (RPC). Those parameters are used in gadget
code to derive invalid data pointers accessing privileged memory in
the attacked process.
Spectre variant 2 attacks can be launched from a rogue process by
:ref:`poisoning <poison_btb>` the branch target buffer. This can
influence the indirect branch targets for a victim process that either
runs later on the same hardware thread, or running concurrently on
a sibling hardware thread sharing the same physical core.
A user process can protect itself against Spectre variant 2 attacks
by using the prctl() syscall to disable indirect branch speculation
for itself. An administrator can also cordon off an unsafe process
from polluting the branch target buffer by disabling the process's
indirect branch speculation. This comes with a performance cost
from not using indirect branch speculation and clearing the branch
target buffer. When SMT is enabled on x86, for a process that has
indirect branch speculation disabled, Single Threaded Indirect Branch
Predictors (STIBP) :ref:`[4] <spec_ref4>` are turned on to prevent the
sibling thread from controlling branch target buffer. In addition,
the Indirect Branch Prediction Barrier (IBPB) is issued to clear the
branch target buffer when context switching to and from such process.
On x86, the return stack buffer is stuffed on context switch.
This prevents the branch target buffer from being used for branch
prediction when the return stack buffer underflows while switching to
a deeper call stack. Any poisoned entries in the return stack buffer
left by the previous process will also be cleared.
User programs should use address space randomization to make attacks
more difficult (Set /proc/sys/kernel/randomize_va_space = 1 or 2).
3. A virtualized guest attacking the host
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
The attack mechanism is similar to how user processes attack the
kernel. The kernel is entered via hyper-calls or other virtualization
exit paths.
For Spectre variant 1 attacks, rogue guests can pass parameters
(e.g. in registers) via hyper-calls to derive invalid pointers to
speculate into privileged memory after entering the kernel. For places
where such kernel code has been identified, nospec accessor macros
are used to stop speculative memory access.
For Spectre variant 2 attacks, rogue guests can :ref:`poison
<poison_btb>` the branch target buffer or return stack buffer, causing
the kernel to jump to gadget code in the speculative execution paths.
To mitigate variant 2, the host kernel can use return trampolines
for indirect branches to bypass the poisoned branch target buffer,
and flushing the return stack buffer on VM exit. This prevents rogue
guests from affecting indirect branching in the host kernel.
To protect host processes from rogue guests, host processes can have
indirect branch speculation disabled via prctl(). The branch target
buffer is cleared before context switching to such processes.
4. A virtualized guest attacking other guest
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
A rogue guest may attack another guest to get data accessible by the
other guest.
Spectre variant 1 attacks are possible if parameters can be passed
between guests. This may be done via mechanisms such as shared memory
or message passing. Such parameters could be used to derive data
pointers to privileged data in guest. The privileged data could be
accessed by gadget code in the victim's speculation paths.
Spectre variant 2 attacks can be launched from a rogue guest by
:ref:`poisoning <poison_btb>` the branch target buffer or the return
stack buffer. Such poisoned entries could be used to influence
speculation execution paths in the victim guest.
Linux kernel mitigates attacks to other guests running in the same
CPU hardware thread by flushing the return stack buffer on VM exit,
and clearing the branch target buffer before switching to a new guest.
If SMT is used, Spectre variant 2 attacks from an untrusted guest
in the sibling hyperthread can be mitigated by the administrator,
by turning off the unsafe guest's indirect branch speculation via
prctl(). A guest can also protect itself by turning on microcode
based mitigations (such as IBPB or STIBP on x86) within the guest.
.. _spectre_sys_info:
Spectre system information
--------------------------
The Linux kernel provides a sysfs interface to enumerate the current
mitigation status of the system for Spectre: whether the system is
vulnerable, and which mitigations are active.
The sysfs file showing Spectre variant 1 mitigation status is:
/sys/devices/system/cpu/vulnerabilities/spectre_v1
The possible values in this file are:
======================================= =================================
'Mitigation: __user pointer sanitation' Protection in kernel on a case by
case base with explicit pointer
sanitation.
======================================= =================================
However, the protections are put in place on a case by case basis,
and there is no guarantee that all possible attack vectors for Spectre
variant 1 are covered.
The spectre_v2 kernel file reports if the kernel has been compiled with
retpoline mitigation or if the CPU has hardware mitigation, and if the
CPU has support for additional process-specific mitigation.
This file also reports CPU features enabled by microcode to mitigate
attack between user processes:
1. Indirect Branch Prediction Barrier (IBPB) to add additional
isolation between processes of different users.
2. Single Thread Indirect Branch Predictors (STIBP) to add additional
isolation between CPU threads running on the same core.
These CPU features may impact performance when used and can be enabled
per process on a case-by-case base.
The sysfs file showing Spectre variant 2 mitigation status is:
/sys/devices/system/cpu/vulnerabilities/spectre_v2
The possible values in this file are:
- Kernel status:
==================================== =================================
'Not affected' The processor is not vulnerable
'Vulnerable' Vulnerable, no mitigation
'Mitigation: Full generic retpoline' Software-focused mitigation
'Mitigation: Full AMD retpoline' AMD-specific software mitigation
'Mitigation: Enhanced IBRS' Hardware-focused mitigation
==================================== =================================
- Firmware status: Show if Indirect Branch Restricted Speculation (IBRS) is
used to protect against Spectre variant 2 attacks when calling firmware (x86 only).
========== =============================================================
'IBRS_FW' Protection against user program attacks when calling firmware
========== =============================================================
- Indirect branch prediction barrier (IBPB) status for protection between
processes of different users. This feature can be controlled through
prctl() per process, or through kernel command line options. This is
an x86 only feature. For more details see below.
=================== ========================================================
'IBPB: disabled' IBPB unused
'IBPB: always-on' Use IBPB on all tasks
'IBPB: conditional' Use IBPB on SECCOMP or indirect branch restricted tasks
=================== ========================================================
- Single threaded indirect branch prediction (STIBP) status for protection
between different hyper threads. This feature can be controlled through
prctl per process, or through kernel command line options. This is x86
only feature. For more details see below.
==================== ========================================================
'STIBP: disabled' STIBP unused
'STIBP: forced' Use STIBP on all tasks
'STIBP: conditional' Use STIBP on SECCOMP or indirect branch restricted tasks
==================== ========================================================
- Return stack buffer (RSB) protection status:
============= ===========================================
'RSB filling' Protection of RSB on context switch enabled
============= ===========================================
Full mitigation might require a microcode update from the CPU
vendor. When the necessary microcode is not available, the kernel will
report vulnerability.
Turning on mitigation for Spectre variant 1 and Spectre variant 2
-----------------------------------------------------------------
1. Kernel mitigation
^^^^^^^^^^^^^^^^^^^^
For the Spectre variant 1, vulnerable kernel code (as determined
by code audit or scanning tools) is annotated on a case by case
basis to use nospec accessor macros for bounds clipping :ref:`[2]
<spec_ref2>` to avoid any usable disclosure gadgets. However, it may
not cover all attack vectors for Spectre variant 1.
For Spectre variant 2 mitigation, the compiler turns indirect calls or
jumps in the kernel into equivalent return trampolines (retpolines)
:ref:`[3] <spec_ref3>` :ref:`[9] <spec_ref9>` to go to the target
addresses. Speculative execution paths under retpolines are trapped
in an infinite loop to prevent any speculative execution jumping to
a gadget.
To turn on retpoline mitigation on a vulnerable CPU, the kernel
needs to be compiled with a gcc compiler that supports the
-mindirect-branch=thunk-extern -mindirect-branch-register options.
If the kernel is compiled with a Clang compiler, the compiler needs
to support -mretpoline-external-thunk option. The kernel config
CONFIG_RETPOLINE needs to be turned on, and the CPU needs to run with
the latest updated microcode.
On Intel Skylake-era systems the mitigation covers most, but not all,
cases. See :ref:`[3] <spec_ref3>` for more details.
On CPUs with hardware mitigation for Spectre variant 2 (e.g. Enhanced
IBRS on x86), retpoline is automatically disabled at run time.
The retpoline mitigation is turned on by default on vulnerable
CPUs. It can be forced on or off by the administrator
via the kernel command line and sysfs control files. See
:ref:`spectre_mitigation_control_command_line`.
On x86, indirect branch restricted speculation is turned on by default
before invoking any firmware code to prevent Spectre variant 2 exploits
using the firmware.
Using kernel address space randomization (CONFIG_RANDOMIZE_SLAB=y
and CONFIG_SLAB_FREELIST_RANDOM=y in the kernel configuration) makes
attacks on the kernel generally more difficult.
2. User program mitigation
^^^^^^^^^^^^^^^^^^^^^^^^^^
User programs can mitigate Spectre variant 1 using LFENCE or "bounds
clipping". For more details see :ref:`[2] <spec_ref2>`.
For Spectre variant 2 mitigation, individual user programs
can be compiled with return trampolines for indirect branches.
This protects them from consuming poisoned entries in the branch
target buffer left by malicious software. Alternatively, the
programs can disable their indirect branch speculation via prctl()
(See :ref:`Documentation/userspace-api/spec_ctrl.rst <set_spec_ctrl>`).
On x86, this will turn on STIBP to guard against attacks from the
sibling thread when the user program is running, and use IBPB to
flush the branch target buffer when switching to/from the program.
Restricting indirect branch speculation on a user program will
also prevent the program from launching a variant 2 attack
on x86. All sand-boxed SECCOMP programs have indirect branch
speculation restricted by default. Administrators can change
that behavior via the kernel command line and sysfs control files.
See :ref:`spectre_mitigation_control_command_line`.
Programs that disable their indirect branch speculation will have
more overhead and run slower.
User programs should use address space randomization
(/proc/sys/kernel/randomize_va_space = 1 or 2) to make attacks more
difficult.
3. VM mitigation
^^^^^^^^^^^^^^^^
Within the kernel, Spectre variant 1 attacks from rogue guests are
mitigated on a case by case basis in VM exit paths. Vulnerable code
uses nospec accessor macros for "bounds clipping", to avoid any
usable disclosure gadgets. However, this may not cover all variant
1 attack vectors.
For Spectre variant 2 attacks from rogue guests to the kernel, the
Linux kernel uses retpoline or Enhanced IBRS to prevent consumption of
poisoned entries in branch target buffer left by rogue guests. It also
flushes the return stack buffer on every VM exit to prevent a return
stack buffer underflow so poisoned branch target buffer could be used,
or attacker guests leaving poisoned entries in the return stack buffer.
To mitigate guest-to-guest attacks in the same CPU hardware thread,
the branch target buffer is sanitized by flushing before switching
to a new guest on a CPU.
The above mitigations are turned on by default on vulnerable CPUs.
To mitigate guest-to-guest attacks from sibling thread when SMT is
in use, an untrusted guest running in the sibling thread can have
its indirect branch speculation disabled by administrator via prctl().
The kernel also allows guests to use any microcode based mitigation
they choose to use (such as IBPB or STIBP on x86) to protect themselves.
.. _spectre_mitigation_control_command_line:
Mitigation control on the kernel command line
---------------------------------------------
Spectre variant 2 mitigation can be disabled or force enabled at the
kernel command line.
nospectre_v2
[X86] Disable all mitigations for the Spectre variant 2
(indirect branch prediction) vulnerability. System may
allow data leaks with this option, which is equivalent
to spectre_v2=off.
spectre_v2=
[X86] Control mitigation of Spectre variant 2
(indirect branch speculation) vulnerability.
The default operation protects the kernel from
user space attacks.
on
unconditionally enable, implies
spectre_v2_user=on
off
unconditionally disable, implies
spectre_v2_user=off
auto
kernel detects whether your CPU model is
vulnerable
Selecting 'on' will, and 'auto' may, choose a
mitigation method at run time according to the
CPU, the available microcode, the setting of the
CONFIG_RETPOLINE configuration option, and the
compiler with which the kernel was built.
Selecting 'on' will also enable the mitigation
against user space to user space task attacks.
Selecting 'off' will disable both the kernel and
the user space protections.
Specific mitigations can also be selected manually:
retpoline
replace indirect branches
retpoline,generic
google's original retpoline
retpoline,amd
AMD-specific minimal thunk
Not specifying this option is equivalent to
spectre_v2=auto.
For user space mitigation:
spectre_v2_user=
[X86] Control mitigation of Spectre variant 2
(indirect branch speculation) vulnerability between
user space tasks
on
Unconditionally enable mitigations. Is
enforced by spectre_v2=on
off
Unconditionally disable mitigations. Is
enforced by spectre_v2=off
prctl
Indirect branch speculation is enabled,
but mitigation can be enabled via prctl
per thread. The mitigation control state
is inherited on fork.
prctl,ibpb
Like "prctl" above, but only STIBP is
controlled per thread. IBPB is issued
always when switching between different user
space processes.
seccomp
Same as "prctl" above, but all seccomp
threads will enable the mitigation unless
they explicitly opt out.
seccomp,ibpb
Like "seccomp" above, but only STIBP is
controlled per thread. IBPB is issued
always when switching between different
user space processes.
auto
Kernel selects the mitigation depending on
the available CPU features and vulnerability.
Default mitigation:
If CONFIG_SECCOMP=y then "seccomp", otherwise "prctl"
Not specifying this option is equivalent to
spectre_v2_user=auto.
In general the kernel by default selects
reasonable mitigations for the current CPU. To
disable Spectre variant 2 mitigations, boot with
spectre_v2=off. Spectre variant 1 mitigations
cannot be disabled.
Mitigation selection guide
--------------------------
1. Trusted userspace
^^^^^^^^^^^^^^^^^^^^
If all userspace applications are from trusted sources and do not
execute externally supplied untrusted code, then the mitigations can
be disabled.
2. Protect sensitive programs
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
For security-sensitive programs that have secrets (e.g. crypto
keys), protection against Spectre variant 2 can be put in place by
disabling indirect branch speculation when the program is running
(See :ref:`Documentation/userspace-api/spec_ctrl.rst <set_spec_ctrl>`).
3. Sandbox untrusted programs
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Untrusted programs that could be a source of attacks can be cordoned
off by disabling their indirect branch speculation when they are run
(See :ref:`Documentation/userspace-api/spec_ctrl.rst <set_spec_ctrl>`).
This prevents untrusted programs from polluting the branch target
buffer. All programs running in SECCOMP sandboxes have indirect
branch speculation restricted by default. This behavior can be
changed via the kernel command line and sysfs control files. See
:ref:`spectre_mitigation_control_command_line`.
3. High security mode
^^^^^^^^^^^^^^^^^^^^^
All Spectre variant 2 mitigations can be forced on
at boot time for all programs (See the "on" option in
:ref:`spectre_mitigation_control_command_line`). This will add
overhead as indirect branch speculations for all programs will be
restricted.
On x86, branch target buffer will be flushed with IBPB when switching
to a new program. STIBP is left on all the time to protect programs
against variant 2 attacks originating from programs running on
sibling threads.
Alternatively, STIBP can be used only when running programs
whose indirect branch speculation is explicitly disabled,
while IBPB is still used all the time when switching to a new
program to clear the branch target buffer (See "ibpb" option in
:ref:`spectre_mitigation_control_command_line`). This "ibpb" option
has less performance cost than the "on" option, which leaves STIBP
on all the time.
References on Spectre
---------------------
Intel white papers:
.. _spec_ref1:
[1] `Intel analysis of speculative execution side channels <https://newsroom.intel.com/wp-content/uploads/sites/11/2018/01/Intel-Analysis-of-Speculative-Execution-Side-Channels.pdf>`_.
.. _spec_ref2:
[2] `Bounds check bypass <https://software.intel.com/security-software-guidance/software-guidance/bounds-check-bypass>`_.
.. _spec_ref3:
[3] `Deep dive: Retpoline: A branch target injection mitigation <https://software.intel.com/security-software-guidance/insights/deep-dive-retpoline-branch-target-injection-mitigation>`_.
.. _spec_ref4:
[4] `Deep Dive: Single Thread Indirect Branch Predictors <https://software.intel.com/security-software-guidance/insights/deep-dive-single-thread-indirect-branch-predictors>`_.
AMD white papers:
.. _spec_ref5:
[5] `AMD64 technology indirect branch control extension <https://developer.amd.com/wp-content/resources/Architecture_Guidelines_Update_Indirect_Branch_Control.pdf>`_.
.. _spec_ref6:
[6] `Software techniques for managing speculation on AMD processors <https://developer.amd.com/wp-content/resources/90343-B_SoftwareTechniquesforManagingSpeculation_WP_7-18Update_FNL.pdf>`_.
ARM white papers:
.. _spec_ref7:
[7] `Cache speculation side-channels <https://developer.arm.com/support/arm-security-updates/speculative-processor-vulnerability/download-the-whitepaper>`_.
.. _spec_ref8:
[8] `Cache speculation issues update <https://developer.arm.com/support/arm-security-updates/speculative-processor-vulnerability/latest-updates/cache-speculation-issues-update>`_.
Google white paper:
.. _spec_ref9:
[9] `Retpoline: a software construct for preventing branch-target-injection <https://support.google.com/faqs/answer/7625886>`_.
MIPS white paper:
.. _spec_ref10:
[10] `MIPS: response on speculative execution and side channel vulnerabilities <https://www.mips.com/blog/mips-response-on-speculative-execution-and-side-channel-vulnerabilities/>`_.
Academic papers:
.. _spec_ref11:
[11] `Spectre Attacks: Exploiting Speculative Execution <https://spectreattack.com/spectre.pdf>`_.
.. _spec_ref12:
[12] `NetSpectre: Read Arbitrary Memory over Network <https://arxiv.org/abs/1807.10535>`_.
.. _spec_ref13:
[13] `Spectre Returns! Speculation Attacks using the Return Stack Buffer <https://www.usenix.org/system/files/conference/woot18/woot18-paper-koruyeh.pdf>`_.
@@ -5102,12 +5102,6 @@
emulate [default] Vsyscalls turn into traps and are
emulated reasonably safely.
native Vsyscalls are native syscall instructions.
This is a little bit faster than trapping
and makes a few dynamic recompilers work
better than they would in emulation mode.
It also makes exploits much easier to write.
none Vsyscalls don't work at all. This makes
them quite hard to use for exploits but
might break your system.
+3
View File
@@ -194,6 +194,9 @@ These helper barriers exist because architectures have varying implicit
ordering on their SMP atomic primitives. For example our TSO architectures
provide full ordered atomics and these barriers are no-ops.
NOTE: when the atomic RmW ops are fully ordered, they should also imply a
compiler barrier.
Thus:
atomic_fetch_add();
@@ -16,7 +16,7 @@ Required properties:
Optional properties:
- interrupts: interrupt line number for the SMI error/done interrupt
- clocks: phandle for up to three required clocks for the MDIO instance
- clocks: phandle for up to four required clocks for the MDIO instance
The child nodes of the MDIO driver are the individual PHY devices
connected to this MDIO bus. They must have a "reg" property given the
+2 -1
View File
@@ -20,7 +20,8 @@ void calc_runnable_avg_yN_inv(void)
int i;
unsigned int x;
printf("static const u32 runnable_avg_yN_inv[] = {");
/* To silence -Wunused-but-set-variable warnings. */
printf("static const u32 runnable_avg_yN_inv[] __maybe_unused = {");
for (i = 0; i < HALFLIFE; i++) {
x = ((1UL<<32)-1)*pow(y, i);
@@ -49,6 +49,8 @@ If PR_SPEC_PRCTL is set, then the per-task control of the mitigation is
available. If not set, prctl(PR_SET_SPECULATION_CTRL) for the speculation
misfeature will fail.
.. _set_spec_ctrl:
PR_SET_SPECULATION_CTRL
-----------------------
+1 -1
View File
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
VERSION = 5
PATCHLEVEL = 2
SUBLEVEL = 0
SUBLEVEL = 3
EXTRAVERSION =
NAME = Bobtail Squid
+4 -5
View File
@@ -181,11 +181,6 @@ static void *__init unw_hdr_alloc_early(unsigned long sz)
return memblock_alloc_from(sz, sizeof(unsigned int), MAX_DMA_ADDRESS);
}
static void *unw_hdr_alloc(unsigned long sz)
{
return kmalloc(sz, GFP_KERNEL);
}
static void init_unwind_table(struct unwind_table *table, const char *name,
const void *core_start, unsigned long core_size,
const void *init_start, unsigned long init_size,
@@ -366,6 +361,10 @@ ret_err:
}
#ifdef CONFIG_MODULES
static void *unw_hdr_alloc(unsigned long sz)
{
return kmalloc(sz, GFP_KERNEL);
}
static struct unwind_table *last_table;
+1 -1
View File
@@ -64,7 +64,7 @@
gpio-sck = <&gpio1 5 GPIO_ACTIVE_HIGH>;
gpio-miso = <&gpio1 8 GPIO_ACTIVE_HIGH>;
gpio-mosi = <&gpio1 7 GPIO_ACTIVE_HIGH>;
cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
num-chipselects = <1>;
panel: display@0 {
+2 -1
View File
@@ -260,7 +260,8 @@ config GENERIC_CALIBRATE_DELAY
def_bool y
config ZONE_DMA32
def_bool y
bool "Support DMA32 zone" if EXPERT
default y
config HAVE_GENERIC_GUP
def_bool y
@@ -328,7 +328,8 @@
regulator-max-microvolt = <1320000>;
enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>;
regulator-ramp-delay = <80>;
regulator-enable-ramp-delay = <1000>;
regulator-enable-ramp-delay = <2000>;
regulator-settling-time-us = <160>;
};
};
};
@@ -633,17 +633,16 @@
};
vdd_gpu: regulator@6 {
compatible = "regulator-fixed";
compatible = "pwm-regulator";
reg = <6>;
pwms = <&pwm 1 4880>;
regulator-name = "VDD_GPU";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-enable-ramp-delay = <250>;
gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-min-microvolt = <710000>;
regulator-max-microvolt = <1320000>;
regulator-ramp-delay = <80>;
regulator-enable-ramp-delay = <2000>;
regulator-settling-time-us = <160>;
enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>;
vin-supply = <&vdd_5v0_sys>;
};
};
+1 -1
View File
@@ -1258,7 +1258,7 @@
compatible = "nvidia,tegra210-agic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x702f9000 0x2000>,
reg = <0x702f9000 0x1000>,
<0x702fa000 0x2000>;
interrupts = <GIC_SPI 102 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&tegra_car TEGRA210_CLK_APE>;
+1 -1
View File
@@ -52,7 +52,7 @@ static int sha1_ce_finup(struct shash_desc *desc, const u8 *data,
unsigned int len, u8 *out)
{
struct sha1_ce_state *sctx = shash_desc_ctx(desc);
bool finalize = !sctx->sst.count && !(len % SHA1_BLOCK_SIZE);
bool finalize = !sctx->sst.count && !(len % SHA1_BLOCK_SIZE) && len;
if (!crypto_simd_usable())
return crypto_sha1_finup(desc, data, len, out);
+1 -1
View File
@@ -57,7 +57,7 @@ static int sha256_ce_finup(struct shash_desc *desc, const u8 *data,
unsigned int len, u8 *out)
{
struct sha256_ce_state *sctx = shash_desc_ctx(desc);
bool finalize = !sctx->sst.count && !(len % SHA256_BLOCK_SIZE);
bool finalize = !sctx->sst.count && !(len % SHA256_BLOCK_SIZE) && len;
if (!crypto_simd_usable()) {
if (len)
+3 -1
View File
@@ -152,7 +152,9 @@ static inline bool gic_prio_masking_enabled(void)
static inline void gic_pmr_mask_irqs(void)
{
BUILD_BUG_ON(GICD_INT_DEF_PRI <= GIC_PRIO_IRQOFF);
BUILD_BUG_ON(GICD_INT_DEF_PRI < (GIC_PRIO_IRQOFF |
GIC_PRIO_PSR_I_SET));
BUILD_BUG_ON(GICD_INT_DEF_PRI >= GIC_PRIO_IRQON);
gic_write_pmr(GIC_PRIO_IRQOFF);
}
+43 -29
View File
@@ -7,6 +7,7 @@
#include <linux/irqflags.h>
#include <asm/arch_gicv3.h>
#include <asm/cpufeature.h>
#define DAIF_PROCCTX 0
@@ -21,6 +22,11 @@ static inline void local_daif_mask(void)
:
:
: "memory");
/* Don't really care for a dsb here, we don't intend to enable IRQs */
if (system_uses_irq_prio_masking())
gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET);
trace_hardirqs_off();
}
@@ -32,7 +38,7 @@ static inline unsigned long local_daif_save(void)
if (system_uses_irq_prio_masking()) {
/* If IRQs are masked with PMR, reflect it in the flags */
if (read_sysreg_s(SYS_ICC_PMR_EL1) <= GIC_PRIO_IRQOFF)
if (read_sysreg_s(SYS_ICC_PMR_EL1) != GIC_PRIO_IRQON)
flags |= PSR_I_BIT;
}
@@ -48,36 +54,44 @@ static inline void local_daif_restore(unsigned long flags)
if (!irq_disabled) {
trace_hardirqs_on();
if (system_uses_irq_prio_masking())
arch_local_irq_enable();
} else if (!(flags & PSR_A_BIT)) {
/*
* If interrupts are disabled but we can take
* asynchronous errors, we can take NMIs
*/
if (system_uses_irq_prio_masking()) {
flags &= ~PSR_I_BIT;
/*
* There has been concern that the write to daif
* might be reordered before this write to PMR.
* From the ARM ARM DDI 0487D.a, section D1.7.1
* "Accessing PSTATE fields":
* Writes to the PSTATE fields have side-effects on
* various aspects of the PE operation. All of these
* side-effects are guaranteed:
* - Not to be visible to earlier instructions in
* the execution stream.
* - To be visible to later instructions in the
* execution stream
*
* Also, writes to PMR are self-synchronizing, so no
* interrupts with a lower priority than PMR is signaled
* to the PE after the write.
*
* So we don't need additional synchronization here.
*/
arch_local_irq_disable();
gic_write_pmr(GIC_PRIO_IRQON);
dsb(sy);
}
} else if (system_uses_irq_prio_masking()) {
u64 pmr;
if (!(flags & PSR_A_BIT)) {
/*
* If interrupts are disabled but we can take
* asynchronous errors, we can take NMIs
*/
flags &= ~PSR_I_BIT;
pmr = GIC_PRIO_IRQOFF;
} else {
pmr = GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET;
}
/*
* There has been concern that the write to daif
* might be reordered before this write to PMR.
* From the ARM ARM DDI 0487D.a, section D1.7.1
* "Accessing PSTATE fields":
* Writes to the PSTATE fields have side-effects on
* various aspects of the PE operation. All of these
* side-effects are guaranteed:
* - Not to be visible to earlier instructions in
* the execution stream.
* - To be visible to later instructions in the
* execution stream
*
* Also, writes to PMR are self-synchronizing, so no
* interrupts with a lower priority than PMR is signaled
* to the PE after the write.
*
* So we don't need additional synchronization here.
*/
gic_write_pmr(pmr);
}
write_sysreg(flags, daif);
+26 -39
View File
@@ -56,43 +56,46 @@ static inline void arch_local_irq_disable(void)
*/
static inline unsigned long arch_local_save_flags(void)
{
unsigned long daif_bits;
unsigned long flags;
daif_bits = read_sysreg(daif);
/*
* The asm is logically equivalent to:
*
* if (system_uses_irq_prio_masking())
* flags = (daif_bits & PSR_I_BIT) ?
* GIC_PRIO_IRQOFF :
* read_sysreg_s(SYS_ICC_PMR_EL1);
* else
* flags = daif_bits;
*/
asm volatile(ALTERNATIVE(
"mov %0, %1\n"
"nop\n"
"nop",
__mrs_s("%0", SYS_ICC_PMR_EL1)
"ands %1, %1, " __stringify(PSR_I_BIT) "\n"
"csel %0, %0, %2, eq",
ARM64_HAS_IRQ_PRIO_MASKING)
: "=&r" (flags), "+r" (daif_bits)
: "r" ((unsigned long) GIC_PRIO_IRQOFF)
"mrs %0, daif",
__mrs_s("%0", SYS_ICC_PMR_EL1),
ARM64_HAS_IRQ_PRIO_MASKING)
: "=&r" (flags)
:
: "memory");
return flags;
}
static inline int arch_irqs_disabled_flags(unsigned long flags)
{
int res;
asm volatile(ALTERNATIVE(
"and %w0, %w1, #" __stringify(PSR_I_BIT),
"eor %w0, %w1, #" __stringify(GIC_PRIO_IRQON),
ARM64_HAS_IRQ_PRIO_MASKING)
: "=&r" (res)
: "r" ((int) flags)
: "memory");
return res;
}
static inline unsigned long arch_local_irq_save(void)
{
unsigned long flags;
flags = arch_local_save_flags();
arch_local_irq_disable();
/*
* There are too many states with IRQs disabled, just keep the current
* state if interrupts are already disabled/masked.
*/
if (!arch_irqs_disabled_flags(flags))
arch_local_irq_disable();
return flags;
}
@@ -113,21 +116,5 @@ static inline void arch_local_irq_restore(unsigned long flags)
: "memory");
}
static inline int arch_irqs_disabled_flags(unsigned long flags)
{
int res;
asm volatile(ALTERNATIVE(
"and %w0, %w1, #" __stringify(PSR_I_BIT) "\n"
"nop",
"cmp %w1, #" __stringify(GIC_PRIO_IRQOFF) "\n"
"cset %w0, ls",
ARM64_HAS_IRQ_PRIO_MASKING)
: "=&r" (res)
: "r" ((int) flags)
: "memory");
return res;
}
#endif
#endif
+4 -3
View File
@@ -597,11 +597,12 @@ static inline void kvm_arm_vhe_guest_enter(void)
* will not signal the CPU of interrupts of lower priority, and the
* only way to get out will be via guest exceptions.
* Naturally, we want to avoid this.
*
* local_daif_mask() already sets GIC_PRIO_PSR_I_SET, we just need a
* dsb to ensure the redistributor is forwards EL2 IRQs to the CPU.
*/
if (system_uses_irq_prio_masking()) {
gic_write_pmr(GIC_PRIO_IRQON);
if (system_uses_irq_prio_masking())
dsb(sy);
}
}
static inline void kvm_arm_vhe_guest_exit(void)
+8 -2
View File
@@ -24,9 +24,15 @@
* means masking more IRQs (or at least that the same IRQs remain masked).
*
* To mask interrupts, we clear the most significant bit of PMR.
*
* Some code sections either automatically switch back to PSR.I or explicitly
* require to not use priority masking. If bit GIC_PRIO_PSR_I_SET is included
* in the the priority mask, it indicates that PSR.I should be set and
* interrupt disabling temporarily does not rely on IRQ priorities.
*/
#define GIC_PRIO_IRQON 0xf0
#define GIC_PRIO_IRQOFF (GIC_PRIO_IRQON & ~0x80)
#define GIC_PRIO_IRQON 0xc0
#define GIC_PRIO_IRQOFF (GIC_PRIO_IRQON & ~0x80)
#define GIC_PRIO_PSR_I_SET (1 << 4)
/* Additional SPSR bits not exposed in the UABI */
#define PSR_IL_BIT (1 << 20)
+7 -3
View File
@@ -152,10 +152,14 @@ static int __init acpi_fadt_sanity_check(void)
*/
if (table->revision < 5 ||
(table->revision == 5 && fadt->minor_revision < 1)) {
pr_err("Unsupported FADT revision %d.%d, should be 5.1+\n",
pr_err(FW_BUG "Unsupported FADT revision %d.%d, should be 5.1+\n",
table->revision, fadt->minor_revision);
ret = -EINVAL;
goto out;
if (!fadt->arm_boot_flags) {
ret = -EINVAL;
goto out;
}
pr_err("FADT has ARM boot flags set, assuming 5.1\n");
}
if (!(fadt->flags & ACPI_FADT_HW_REDUCED)) {
+68 -18
View File
@@ -247,6 +247,7 @@ alternative_else_nop_endif
/*
* Registers that may be useful after this macro is invoked:
*
* x20 - ICC_PMR_EL1
* x21 - aborted SP
* x22 - aborted PC
* x23 - aborted PSTATE
@@ -424,6 +425,38 @@ tsk .req x28 // current thread_info
irq_stack_exit
.endm
#ifdef CONFIG_ARM64_PSEUDO_NMI
/*
* Set res to 0 if irqs were unmasked in interrupted context.
* Otherwise set res to non-0 value.
*/
.macro test_irqs_unmasked res:req, pmr:req
alternative_if ARM64_HAS_IRQ_PRIO_MASKING
sub \res, \pmr, #GIC_PRIO_IRQON
alternative_else
mov \res, xzr
alternative_endif
.endm
#endif
.macro gic_prio_kentry_setup, tmp:req
#ifdef CONFIG_ARM64_PSEUDO_NMI
alternative_if ARM64_HAS_IRQ_PRIO_MASKING
mov \tmp, #(GIC_PRIO_PSR_I_SET | GIC_PRIO_IRQON)
msr_s SYS_ICC_PMR_EL1, \tmp
alternative_else_nop_endif
#endif
.endm
.macro gic_prio_irq_setup, pmr:req, tmp:req
#ifdef CONFIG_ARM64_PSEUDO_NMI
alternative_if ARM64_HAS_IRQ_PRIO_MASKING
orr \tmp, \pmr, #GIC_PRIO_PSR_I_SET
msr_s SYS_ICC_PMR_EL1, \tmp
alternative_else_nop_endif
#endif
.endm
.text
/*
@@ -602,6 +635,7 @@ el1_dbg:
cmp x24, #ESR_ELx_EC_BRK64 // if BRK64
cinc x24, x24, eq // set bit '0'
tbz x24, #0, el1_inv // EL1 only
gic_prio_kentry_setup tmp=x3
mrs x0, far_el1
mov x2, sp // struct pt_regs
bl do_debug_exception
@@ -619,22 +653,20 @@ ENDPROC(el1_sync)
.align 6
el1_irq:
kernel_entry 1
gic_prio_irq_setup pmr=x20, tmp=x1
enable_da_f
#ifdef CONFIG_TRACE_IRQFLAGS
#ifdef CONFIG_ARM64_PSEUDO_NMI
alternative_if ARM64_HAS_IRQ_PRIO_MASKING
ldr x20, [sp, #S_PMR_SAVE]
alternative_else
mov x20, #GIC_PRIO_IRQON
alternative_endif
cmp x20, #GIC_PRIO_IRQOFF
/* Irqs were disabled, don't trace */
b.ls 1f
#endif
bl trace_hardirqs_off
test_irqs_unmasked res=x0, pmr=x20
cbz x0, 1f
bl asm_nmi_enter
1:
#endif
#ifdef CONFIG_TRACE_IRQFLAGS
bl trace_hardirqs_off
#endif
irq_handler
#ifdef CONFIG_PREEMPT
@@ -651,14 +683,23 @@ alternative_else_nop_endif
bl preempt_schedule_irq // irq en/disable is done inside
1:
#endif
#ifdef CONFIG_TRACE_IRQFLAGS
#ifdef CONFIG_ARM64_PSEUDO_NMI
/*
* if IRQs were disabled when we received the interrupt, we have an NMI
* and we are not re-enabling interrupt upon eret. Skip tracing.
* When using IRQ priority masking, we can get spurious interrupts while
* PMR is set to GIC_PRIO_IRQOFF. An NMI might also have occurred in a
* section with interrupts disabled. Skip tracing in those cases.
*/
cmp x20, #GIC_PRIO_IRQOFF
b.ls 1f
test_irqs_unmasked res=x0, pmr=x20
cbz x0, 1f
bl asm_nmi_exit
1:
#endif
#ifdef CONFIG_TRACE_IRQFLAGS
#ifdef CONFIG_ARM64_PSEUDO_NMI
test_irqs_unmasked res=x0, pmr=x20
cbnz x0, 1f
#endif
bl trace_hardirqs_on
1:
@@ -776,6 +817,7 @@ el0_ia:
* Instruction abort handling
*/
mrs x26, far_el1
gic_prio_kentry_setup tmp=x0
enable_da_f
#ifdef CONFIG_TRACE_IRQFLAGS
bl trace_hardirqs_off
@@ -821,6 +863,7 @@ el0_sp_pc:
* Stack or PC alignment exception handling
*/
mrs x26, far_el1
gic_prio_kentry_setup tmp=x0
enable_da_f
#ifdef CONFIG_TRACE_IRQFLAGS
bl trace_hardirqs_off
@@ -855,11 +898,12 @@ el0_dbg:
* Debug exception handling
*/
tbnz x24, #0, el0_inv // EL0 only
gic_prio_kentry_setup tmp=x3
mrs x0, far_el1
mov x1, x25
mov x2, sp
bl do_debug_exception
enable_daif
enable_da_f
ct_user_exit
b ret_to_user
el0_inv:
@@ -876,7 +920,9 @@ ENDPROC(el0_sync)
el0_irq:
kernel_entry 0
el0_irq_naked:
gic_prio_irq_setup pmr=x20, tmp=x0
enable_da_f
#ifdef CONFIG_TRACE_IRQFLAGS
bl trace_hardirqs_off
#endif
@@ -898,6 +944,7 @@ ENDPROC(el0_irq)
el1_error:
kernel_entry 1
mrs x1, esr_el1
gic_prio_kentry_setup tmp=x2
enable_dbg
mov x0, sp
bl do_serror
@@ -908,10 +955,11 @@ el0_error:
kernel_entry 0
el0_error_naked:
mrs x1, esr_el1
gic_prio_kentry_setup tmp=x2
enable_dbg
mov x0, sp
bl do_serror
enable_daif
enable_da_f
ct_user_exit
b ret_to_user
ENDPROC(el0_error)
@@ -932,6 +980,7 @@ work_pending:
*/
ret_to_user:
disable_daif
gic_prio_kentry_setup tmp=x3
ldr x1, [tsk, #TSK_TI_FLAGS]
and x2, x1, #_TIF_WORK_MASK
cbnz x2, work_pending
@@ -948,6 +997,7 @@ ENDPROC(ret_to_user)
*/
.align 6
el0_svc:
gic_prio_kentry_setup tmp=x1
mov x0, sp
bl el0_svc_handler
b ret_to_user
+17
View File
@@ -16,8 +16,10 @@
#include <linux/smp.h>
#include <linux/init.h>
#include <linux/irqchip.h>
#include <linux/kprobes.h>
#include <linux/seq_file.h>
#include <linux/vmalloc.h>
#include <asm/daifflags.h>
#include <asm/vmap_stack.h>
unsigned long irq_err_count;
@@ -65,3 +67,18 @@ void __init init_IRQ(void)
if (!handle_arch_irq)
panic("No interrupt controller found.");
}
/*
* Stubs to make nmi_enter/exit() code callable from ASM
*/
asmlinkage void notrace asm_nmi_enter(void)
{
nmi_enter();
}
NOKPROBE_SYMBOL(asm_nmi_enter);
asmlinkage void notrace asm_nmi_exit(void)
{
nmi_exit();
}
NOKPROBE_SYMBOL(asm_nmi_exit);
+1 -1
View File
@@ -83,7 +83,7 @@ static void __cpu_do_idle_irqprio(void)
* be raised.
*/
pmr = gic_read_pmr();
gic_write_pmr(GIC_PRIO_IRQON);
gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET);
__cpu_do_idle();
+5 -3
View File
@@ -181,11 +181,13 @@ static void init_gic_priority_masking(void)
WARN_ON(!(cpuflags & PSR_I_BIT));
gic_write_pmr(GIC_PRIO_IRQOFF);
/* We can only unmask PSR.I if we can take aborts */
if (!(cpuflags & PSR_A_BIT))
if (!(cpuflags & PSR_A_BIT)) {
gic_write_pmr(GIC_PRIO_IRQOFF);
write_sysreg(cpuflags & ~PSR_I_BIT, daif);
} else {
gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET);
}
}
/*
+1 -1
View File
@@ -604,7 +604,7 @@ int __hyp_text __kvm_vcpu_run_nvhe(struct kvm_vcpu *vcpu)
* Naturally, we want to avoid this.
*/
if (system_uses_irq_prio_masking()) {
gic_write_pmr(GIC_PRIO_IRQON);
gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET);
dsb(sy);
}
+3 -2
View File
@@ -180,8 +180,9 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max)
{
unsigned long max_zone_pfns[MAX_NR_ZONES] = {0};
if (IS_ENABLED(CONFIG_ZONE_DMA32))
max_zone_pfns[ZONE_DMA32] = PFN_DOWN(max_zone_dma_phys());
#ifdef CONFIG_ZONE_DMA32
max_zone_pfns[ZONE_DMA32] = PFN_DOWN(max_zone_dma_phys());
#endif
max_zone_pfns[ZONE_NORMAL] = max;
free_area_init_nodes(max_zone_pfns);
+3
View File
@@ -133,6 +133,9 @@ int __kprobes parisc_kprobe_ss_handler(struct pt_regs *regs)
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
struct kprobe *p = kprobe_running();
if (!p)
return 0;
if (regs->iaoq[0] != (unsigned long)p->ainsn.insn+4)
return 0;
+20 -11
View File
@@ -167,6 +167,9 @@ long arch_ptrace(struct task_struct *child, long request,
if ((addr & (sizeof(unsigned long)-1)) ||
addr >= sizeof(struct pt_regs))
break;
if (addr == PT_IAOQ0 || addr == PT_IAOQ1) {
data |= 3; /* ensure userspace privilege */
}
if ((addr >= PT_GR1 && addr <= PT_GR31) ||
addr == PT_IAOQ0 || addr == PT_IAOQ1 ||
(addr >= PT_FR0 && addr <= PT_FR31 + 4) ||
@@ -228,16 +231,18 @@ long arch_ptrace(struct task_struct *child, long request,
static compat_ulong_t translate_usr_offset(compat_ulong_t offset)
{
if (offset < 0)
return sizeof(struct pt_regs);
else if (offset <= 32*4) /* gr[0..31] */
return offset * 2 + 4;
else if (offset <= 32*4+32*8) /* gr[0..31] + fr[0..31] */
return offset + 32*4;
else if (offset < sizeof(struct pt_regs)/2 + 32*4)
return offset * 2 + 4 - 32*8;
compat_ulong_t pos;
if (offset < 32*4) /* gr[0..31] */
pos = offset * 2 + 4;
else if (offset < 32*4+32*8) /* fr[0] ... fr[31] */
pos = (offset - 32*4) + PT_FR0;
else if (offset < sizeof(struct pt_regs)/2 + 32*4) /* sr[0] ... ipsw */
pos = (offset - 32*4 - 32*8) * 2 + PT_SR0 + 4;
else
return sizeof(struct pt_regs);
pos = sizeof(struct pt_regs);
return pos;
}
long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
@@ -281,9 +286,12 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
addr = translate_usr_offset(addr);
if (addr >= sizeof(struct pt_regs))
break;
if (addr == PT_IAOQ0+4 || addr == PT_IAOQ1+4) {
data |= 3; /* ensure userspace privilege */
}
if (addr >= PT_FR0 && addr <= PT_FR31 + 4) {
/* Special case, fp regs are 64 bits anyway */
*(__u64 *) ((char *) task_regs(child) + addr) = data;
*(__u32 *) ((char *) task_regs(child) + addr) = data;
ret = 0;
}
else if ((addr >= PT_GR1+4 && addr <= PT_GR31+4) ||
@@ -496,7 +504,8 @@ static void set_reg(struct pt_regs *regs, int num, unsigned long val)
return;
case RI(iaoq[0]):
case RI(iaoq[1]):
regs->iaoq[num - RI(iaoq[0])] = val;
/* set 2 lowest bits to ensure userspace privilege: */
regs->iaoq[num - RI(iaoq[0])] = val | 3;
return;
case RI(sar): regs->sar = val;
return;
+14
View File
@@ -140,6 +140,20 @@ static inline void pte_frag_set(mm_context_t *ctx, void *p)
}
#endif
#ifdef CONFIG_PPC64
#define is_ioremap_addr is_ioremap_addr
static inline bool is_ioremap_addr(const void *x)
{
#ifdef CONFIG_MMU
unsigned long addr = (unsigned long)x;
return addr >= IOREMAP_BASE && addr < IOREMAP_END;
#else
return false;
#endif
}
#endif /* CONFIG_PPC64 */
#endif /* __ASSEMBLY__ */
#endif /* _ASM_POWERPC_PGTABLE_H */
+7 -2
View File
@@ -1746,7 +1746,7 @@ handle_page_fault:
addi r3,r1,STACK_FRAME_OVERHEAD
bl do_page_fault
cmpdi r3,0
beq+ 12f
beq+ ret_from_except_lite
bl save_nvgprs
mr r5,r3
addi r3,r1,STACK_FRAME_OVERHEAD
@@ -1761,7 +1761,12 @@ handle_dabr_fault:
ld r5,_DSISR(r1)
addi r3,r1,STACK_FRAME_OVERHEAD
bl do_break
12: b ret_from_except_lite
/*
* do_break() may have changed the NV GPRS while handling a breakpoint.
* If so, we need to restore them with their updated values. Don't use
* ret_from_except_lite here.
*/
b ret_from_except
#ifdef CONFIG_PPC_BOOK3S_64
+15 -1
View File
@@ -168,6 +168,7 @@ static unsigned long __prombss prom_tce_alloc_end;
#ifdef CONFIG_PPC_PSERIES
static bool __prombss prom_radix_disable;
static bool __prombss prom_xive_disable;
#endif
struct platform_support {
@@ -804,6 +805,12 @@ static void __init early_cmdline_parse(void)
}
if (prom_radix_disable)
prom_debug("Radix disabled from cmdline\n");
opt = prom_strstr(prom_cmd_line, "xive=off");
if (opt) {
prom_xive_disable = true;
prom_debug("XIVE disabled from cmdline\n");
}
#endif /* CONFIG_PPC_PSERIES */
}
@@ -1212,10 +1219,17 @@ static void __init prom_parse_xive_model(u8 val,
switch (val) {
case OV5_FEAT(OV5_XIVE_EITHER): /* Either Available */
prom_debug("XIVE - either mode supported\n");
support->xive = true;
support->xive = !prom_xive_disable;
break;
case OV5_FEAT(OV5_XIVE_EXPLOIT): /* Only Exploitation mode */
prom_debug("XIVE - exploitation mode supported\n");
if (prom_xive_disable) {
/*
* If we __have__ to do XIVE, we're better off ignoring
* the command line rather than not booting.
*/
prom_printf("WARNING: Ignoring cmdline option xive=off\n");
}
support->xive = true;
break;
case OV5_FEAT(OV5_XIVE_LEGACY): /* Only Legacy mode */
+65 -8
View File
@@ -25,11 +25,19 @@
#define SL_IBAT2 0x48
#define SL_DBAT3 0x50
#define SL_IBAT3 0x58
#define SL_TB 0x60
#define SL_R2 0x68
#define SL_CR 0x6c
#define SL_LR 0x70
#define SL_R12 0x74 /* r12 to r31 */
#define SL_DBAT4 0x60
#define SL_IBAT4 0x68
#define SL_DBAT5 0x70
#define SL_IBAT5 0x78
#define SL_DBAT6 0x80
#define SL_IBAT6 0x88
#define SL_DBAT7 0x90
#define SL_IBAT7 0x98
#define SL_TB 0xa0
#define SL_R2 0xa8
#define SL_CR 0xac
#define SL_LR 0xb0
#define SL_R12 0xb4 /* r12 to r31 */
#define SL_SIZE (SL_R12 + 80)
.section .data
@@ -114,6 +122,41 @@ _GLOBAL(swsusp_arch_suspend)
mfibatl r4,3
stw r4,SL_IBAT3+4(r11)
BEGIN_MMU_FTR_SECTION
mfspr r4,SPRN_DBAT4U
stw r4,SL_DBAT4(r11)
mfspr r4,SPRN_DBAT4L
stw r4,SL_DBAT4+4(r11)
mfspr r4,SPRN_DBAT5U
stw r4,SL_DBAT5(r11)
mfspr r4,SPRN_DBAT5L
stw r4,SL_DBAT5+4(r11)
mfspr r4,SPRN_DBAT6U
stw r4,SL_DBAT6(r11)
mfspr r4,SPRN_DBAT6L
stw r4,SL_DBAT6+4(r11)
mfspr r4,SPRN_DBAT7U
stw r4,SL_DBAT7(r11)
mfspr r4,SPRN_DBAT7L
stw r4,SL_DBAT7+4(r11)
mfspr r4,SPRN_IBAT4U
stw r4,SL_IBAT4(r11)
mfspr r4,SPRN_IBAT4L
stw r4,SL_IBAT4+4(r11)
mfspr r4,SPRN_IBAT5U
stw r4,SL_IBAT5(r11)
mfspr r4,SPRN_IBAT5L
stw r4,SL_IBAT5+4(r11)
mfspr r4,SPRN_IBAT6U
stw r4,SL_IBAT6(r11)
mfspr r4,SPRN_IBAT6L
stw r4,SL_IBAT6+4(r11)
mfspr r4,SPRN_IBAT7U
stw r4,SL_IBAT7(r11)
mfspr r4,SPRN_IBAT7L
stw r4,SL_IBAT7+4(r11)
END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
#if 0
/* Backup various CPU config stuffs */
bl __save_cpu_setup
@@ -279,27 +322,41 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
mtibatu 3,r4
lwz r4,SL_IBAT3+4(r11)
mtibatl 3,r4
#endif
BEGIN_MMU_FTR_SECTION
li r4,0
lwz r4,SL_DBAT4(r11)
mtspr SPRN_DBAT4U,r4
lwz r4,SL_DBAT4+4(r11)
mtspr SPRN_DBAT4L,r4
lwz r4,SL_DBAT5(r11)
mtspr SPRN_DBAT5U,r4
lwz r4,SL_DBAT5+4(r11)
mtspr SPRN_DBAT5L,r4
lwz r4,SL_DBAT6(r11)
mtspr SPRN_DBAT6U,r4
lwz r4,SL_DBAT6+4(r11)
mtspr SPRN_DBAT6L,r4
lwz r4,SL_DBAT7(r11)
mtspr SPRN_DBAT7U,r4
lwz r4,SL_DBAT7+4(r11)
mtspr SPRN_DBAT7L,r4
lwz r4,SL_IBAT4(r11)
mtspr SPRN_IBAT4U,r4
lwz r4,SL_IBAT4+4(r11)
mtspr SPRN_IBAT4L,r4
lwz r4,SL_IBAT5(r11)
mtspr SPRN_IBAT5U,r4
lwz r4,SL_IBAT5+4(r11)
mtspr SPRN_IBAT5L,r4
lwz r4,SL_IBAT6(r11)
mtspr SPRN_IBAT6U,r4
lwz r4,SL_IBAT6+4(r11)
mtspr SPRN_IBAT6L,r4
lwz r4,SL_IBAT7(r11)
mtspr SPRN_IBAT7U,r4
lwz r4,SL_IBAT7+4(r11)
mtspr SPRN_IBAT7L,r4
END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
#endif
/* Flush all TLBs */
lis r4,0x1000
+11 -2
View File
@@ -3603,6 +3603,8 @@ int kvmhv_p9_guest_entry(struct kvm_vcpu *vcpu, u64 time_limit,
vcpu->arch.slb_max = 0;
dec = mfspr(SPRN_DEC);
if (!(lpcr & LPCR_LD)) /* Sign extend if not using large decrementer */
dec = (s32) dec;
tb = mftb();
vcpu->arch.dec_expires = dec + tb;
vcpu->cpu = -1;
@@ -4122,8 +4124,15 @@ int kvmhv_run_single_vcpu(struct kvm_run *kvm_run,
preempt_enable();
/* cancel pending decrementer exception if DEC is now positive */
if (get_tb() < vcpu->arch.dec_expires && kvmppc_core_pending_dec(vcpu))
/*
* cancel pending decrementer exception if DEC is now positive, or if
* entering a nested guest in which case the decrementer is now owned
* by L2 and the L1 decrementer is provided in hdec_expires
*/
if (kvmppc_core_pending_dec(vcpu) &&
((get_tb() < vcpu->arch.dec_expires) ||
(trap == BOOK3S_INTERRUPT_SYSCALL &&
kvmppc_get_gpr(vcpu, 3) == H_ENTER_NESTED)))
kvmppc_core_dequeue_dec(vcpu);
trace_kvm_guest_exit(vcpu);
+3 -3
View File
@@ -128,7 +128,7 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
}
/* Set CR0 to indicate previous transactional state */
vcpu->arch.regs.ccr = (vcpu->arch.regs.ccr & 0x0fffffff) |
(((msr & MSR_TS_MASK) >> MSR_TS_S_LG) << 28);
(((msr & MSR_TS_MASK) >> MSR_TS_S_LG) << 29);
/* L=1 => tresume, L=0 => tsuspend */
if (instr & (1 << 21)) {
if (MSR_TM_SUSPENDED(msr))
@@ -172,7 +172,7 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
/* Set CR0 to indicate previous transactional state */
vcpu->arch.regs.ccr = (vcpu->arch.regs.ccr & 0x0fffffff) |
(((msr & MSR_TS_MASK) >> MSR_TS_S_LG) << 28);
(((msr & MSR_TS_MASK) >> MSR_TS_S_LG) << 29);
vcpu->arch.shregs.msr &= ~MSR_TS_MASK;
return RESUME_GUEST;
@@ -202,7 +202,7 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
/* Set CR0 to indicate previous transactional state */
vcpu->arch.regs.ccr = (vcpu->arch.regs.ccr & 0x0fffffff) |
(((msr & MSR_TS_MASK) >> MSR_TS_S_LG) << 28);
(((msr & MSR_TS_MASK) >> MSR_TS_S_LG) << 29);
vcpu->arch.shregs.msr = msr | MSR_TS_S;
return RESUME_GUEST;
}
+1 -1
View File
@@ -360,7 +360,7 @@ void mark_initmem_nx(void)
unsigned long numpages = PFN_UP((unsigned long)_einittext) -
PFN_DOWN((unsigned long)_sinittext);
if (v_block_mapped((unsigned long)_stext) + 1)
if (v_block_mapped((unsigned long)_stext + 1))
mmu_mark_initmem_nx();
else
change_page_attr(page, numpages, PAGE_KERNEL);
+63 -5
View File
@@ -33,10 +33,18 @@
#define SL_IBAT2 0x48
#define SL_DBAT3 0x50
#define SL_IBAT3 0x58
#define SL_TB 0x60
#define SL_R2 0x68
#define SL_CR 0x6c
#define SL_R12 0x70 /* r12 to r31 */
#define SL_DBAT4 0x60
#define SL_IBAT4 0x68
#define SL_DBAT5 0x70
#define SL_IBAT5 0x78
#define SL_DBAT6 0x80
#define SL_IBAT6 0x88
#define SL_DBAT7 0x90
#define SL_IBAT7 0x98
#define SL_TB 0xa0
#define SL_R2 0xa8
#define SL_CR 0xac
#define SL_R12 0xb0 /* r12 to r31 */
#define SL_SIZE (SL_R12 + 80)
.section .text
@@ -121,6 +129,41 @@ _GLOBAL(low_sleep_handler)
mfibatl r4,3
stw r4,SL_IBAT3+4(r1)
BEGIN_MMU_FTR_SECTION
mfspr r4,SPRN_DBAT4U
stw r4,SL_DBAT4(r1)
mfspr r4,SPRN_DBAT4L
stw r4,SL_DBAT4+4(r1)
mfspr r4,SPRN_DBAT5U
stw r4,SL_DBAT5(r1)
mfspr r4,SPRN_DBAT5L
stw r4,SL_DBAT5+4(r1)
mfspr r4,SPRN_DBAT6U
stw r4,SL_DBAT6(r1)
mfspr r4,SPRN_DBAT6L
stw r4,SL_DBAT6+4(r1)
mfspr r4,SPRN_DBAT7U
stw r4,SL_DBAT7(r1)
mfspr r4,SPRN_DBAT7L
stw r4,SL_DBAT7+4(r1)
mfspr r4,SPRN_IBAT4U
stw r4,SL_IBAT4(r1)
mfspr r4,SPRN_IBAT4L
stw r4,SL_IBAT4+4(r1)
mfspr r4,SPRN_IBAT5U
stw r4,SL_IBAT5(r1)
mfspr r4,SPRN_IBAT5L
stw r4,SL_IBAT5+4(r1)
mfspr r4,SPRN_IBAT6U
stw r4,SL_IBAT6(r1)
mfspr r4,SPRN_IBAT6L
stw r4,SL_IBAT6+4(r1)
mfspr r4,SPRN_IBAT7U
stw r4,SL_IBAT7(r1)
mfspr r4,SPRN_IBAT7L
stw r4,SL_IBAT7+4(r1)
END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
/* Backup various CPU config stuffs */
bl __save_cpu_setup
@@ -321,22 +364,37 @@ grackle_wake_up:
mtibatl 3,r4
BEGIN_MMU_FTR_SECTION
li r4,0
lwz r4,SL_DBAT4(r1)
mtspr SPRN_DBAT4U,r4
lwz r4,SL_DBAT4+4(r1)
mtspr SPRN_DBAT4L,r4
lwz r4,SL_DBAT5(r1)
mtspr SPRN_DBAT5U,r4
lwz r4,SL_DBAT5+4(r1)
mtspr SPRN_DBAT5L,r4
lwz r4,SL_DBAT6(r1)
mtspr SPRN_DBAT6U,r4
lwz r4,SL_DBAT6+4(r1)
mtspr SPRN_DBAT6L,r4
lwz r4,SL_DBAT7(r1)
mtspr SPRN_DBAT7U,r4
lwz r4,SL_DBAT7+4(r1)
mtspr SPRN_DBAT7L,r4
lwz r4,SL_IBAT4(r1)
mtspr SPRN_IBAT4U,r4
lwz r4,SL_IBAT4+4(r1)
mtspr SPRN_IBAT4L,r4
lwz r4,SL_IBAT5(r1)
mtspr SPRN_IBAT5U,r4
lwz r4,SL_IBAT5+4(r1)
mtspr SPRN_IBAT5L,r4
lwz r4,SL_IBAT6(r1)
mtspr SPRN_IBAT6U,r4
lwz r4,SL_IBAT6+4(r1)
mtspr SPRN_IBAT6L,r4
lwz r4,SL_IBAT7(r1)
mtspr SPRN_IBAT7U,r4
lwz r4,SL_IBAT7+4(r1)
mtspr SPRN_IBAT7L,r4
END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
+1 -1
View File
@@ -758,7 +758,6 @@ static unsigned long power9_idle_stop(unsigned long psscr, bool mmu_on)
mtspr(SPRN_PTCR, sprs.ptcr);
mtspr(SPRN_RPR, sprs.rpr);
mtspr(SPRN_TSCR, sprs.tscr);
mtspr(SPRN_LDBAR, sprs.ldbar);
if (pls >= pnv_first_tb_loss_level) {
/* TB loss */
@@ -790,6 +789,7 @@ core_woken:
mtspr(SPRN_MMCR0, sprs.mmcr0);
mtspr(SPRN_MMCR1, sprs.mmcr1);
mtspr(SPRN_MMCR2, sprs.mmcr2);
mtspr(SPRN_LDBAR, sprs.ldbar);
mtspr(SPRN_SPRG3, local_paca->sprg_vdso);
+14 -1
View File
@@ -28,9 +28,22 @@ static DEFINE_SPINLOCK(npu_context_lock);
static struct pci_dev *get_pci_dev(struct device_node *dn)
{
struct pci_dn *pdn = PCI_DN(dn);
struct pci_dev *pdev;
return pci_get_domain_bus_and_slot(pci_domain_nr(pdn->phb->bus),
pdev = pci_get_domain_bus_and_slot(pci_domain_nr(pdn->phb->bus),
pdn->busno, pdn->devfn);
/*
* pci_get_domain_bus_and_slot() increased the reference count of
* the PCI device, but callers don't need that actually as the PE
* already holds a reference to the device. Since callers aren't
* aware of the reference count change, call pci_dev_put() now to
* avoid leaks.
*/
if (pdev)
pci_dev_put(pdev);
return pdev;
}
/* Given a NPU device get the associated PCI device. */
+10
View File
@@ -2456,6 +2456,14 @@ static long pnv_pci_ioda2_setup_default_config(struct pnv_ioda_pe *pe)
if (!pnv_iommu_bypass_disabled)
pnv_pci_ioda2_set_bypass(pe, true);
/*
* Set table base for the case of IOMMU DMA use. Usually this is done
* from dma_dev_setup() which is not called when a device is returned
* from VFIO so do it here.
*/
if (pe->pdev)
set_iommu_table_base(&pe->pdev->dev, tbl);
return 0;
}
@@ -2543,6 +2551,8 @@ static void pnv_ioda2_take_ownership(struct iommu_table_group *table_group)
pnv_pci_ioda2_unset_window(&pe->table_group, 0);
if (pe->pbus)
pnv_ioda_setup_bus_dma(pe, pe->pbus);
else if (pe->pdev)
set_iommu_table_base(&pe->pdev->dev, NULL);
iommu_tce_table_put(tbl);
}
@@ -976,6 +976,9 @@ static int pseries_update_drconf_memory(struct of_reconfig_data *pr)
if (!memblock_size)
return -EINVAL;
if (!pr->old_prop)
return 0;
p = (__be32 *) pr->old_prop->value;
if (!p)
return -EINVAL;
+51 -1
View File
@@ -16,6 +16,7 @@
#include <linux/cpumask.h>
#include <linux/mm.h>
#include <linux/delay.h>
#include <linux/libfdt.h>
#include <asm/prom.h>
#include <asm/io.h>
@@ -659,6 +660,55 @@ static bool xive_get_max_prio(u8 *max_prio)
return true;
}
static const u8 *get_vec5_feature(unsigned int index)
{
unsigned long root, chosen;
int size;
const u8 *vec5;
root = of_get_flat_dt_root();
chosen = of_get_flat_dt_subnode_by_name(root, "chosen");
if (chosen == -FDT_ERR_NOTFOUND)
return NULL;
vec5 = of_get_flat_dt_prop(chosen, "ibm,architecture-vec-5", &size);
if (!vec5)
return NULL;
if (size <= index)
return NULL;
return vec5 + index;
}
static bool xive_spapr_disabled(void)
{
const u8 *vec5_xive;
vec5_xive = get_vec5_feature(OV5_INDX(OV5_XIVE_SUPPORT));
if (vec5_xive) {
u8 val;
val = *vec5_xive & OV5_FEAT(OV5_XIVE_SUPPORT);
switch (val) {
case OV5_FEAT(OV5_XIVE_EITHER):
case OV5_FEAT(OV5_XIVE_LEGACY):
break;
case OV5_FEAT(OV5_XIVE_EXPLOIT):
/* Hypervisor only supports XIVE */
if (xive_cmdline_disabled)
pr_warn("WARNING: Ignoring cmdline option xive=off\n");
return false;
default:
pr_warn("%s: Unknown xive support option: 0x%x\n",
__func__, val);
break;
}
}
return xive_cmdline_disabled;
}
bool __init xive_spapr_init(void)
{
struct device_node *np;
@@ -671,7 +721,7 @@ bool __init xive_spapr_init(void)
const __be32 *reg;
int i;
if (xive_cmdline_disabled)
if (xive_spapr_disabled())
return false;
pr_devel("%s()\n", __func__);
+14 -7
View File
@@ -59,6 +59,18 @@ static inline int test_facility(unsigned long nr)
return __test_facility(nr, &S390_lowcore.stfle_fac_list);
}
static inline unsigned long __stfle_asm(u64 *stfle_fac_list, int size)
{
register unsigned long reg0 asm("0") = size - 1;
asm volatile(
".insn s,0xb2b00000,0(%1)" /* stfle */
: "+d" (reg0)
: "a" (stfle_fac_list)
: "memory", "cc");
return reg0;
}
/**
* stfle - Store facility list extended
* @stfle_fac_list: array where facility list can be stored
@@ -75,13 +87,8 @@ static inline void __stfle(u64 *stfle_fac_list, int size)
memcpy(stfle_fac_list, &S390_lowcore.stfl_fac_list, 4);
if (S390_lowcore.stfl_fac_list & 0x01000000) {
/* More facility bits available with stfle */
register unsigned long reg0 asm("0") = size - 1;
asm volatile(".insn s,0xb2b00000,0(%1)" /* stfle */
: "+d" (reg0)
: "a" (stfle_fac_list)
: "memory", "cc");
nr = (reg0 + 1) * 8; /* # bytes stored by stfle */
nr = __stfle_asm(stfle_fac_list, size);
nr = min_t(unsigned long, (nr + 1) * 8, size * 8);
}
memset((char *) stfle_fac_list + nr, 0, size * 8 - nr);
}
-1
View File
@@ -80,7 +80,6 @@ struct sclp_info {
unsigned char has_gisaf : 1;
unsigned char has_diag318 : 1;
unsigned char has_sipl : 1;
unsigned char has_sipl_g2 : 1;
unsigned char has_dirq : 1;
unsigned int ibc;
unsigned int mtid;
+1 -6
View File
@@ -286,12 +286,7 @@ static struct kobj_attribute sys_ipl_secure_attr =
static ssize_t ipl_has_secure_show(struct kobject *kobj,
struct kobj_attribute *attr, char *page)
{
if (MACHINE_IS_LPAR)
return sprintf(page, "%i\n", !!sclp.has_sipl);
else if (MACHINE_IS_VM)
return sprintf(page, "%i\n", !!sclp.has_sipl_g2);
else
return sprintf(page, "%i\n", 0);
return sprintf(page, "%i\n", !!sclp.has_sipl);
}
static struct kobj_attribute sys_ipl_has_secure_attr =
+24
View File
@@ -1104,6 +1104,30 @@ ENTRY(irq_entries_start)
.endr
END(irq_entries_start)
#ifdef CONFIG_X86_LOCAL_APIC
.align 8
ENTRY(spurious_entries_start)
vector=FIRST_SYSTEM_VECTOR
.rept (NR_VECTORS - FIRST_SYSTEM_VECTOR)
pushl $(~vector+0x80) /* Note: always in signed byte range */
vector=vector+1
jmp common_spurious
.align 8
.endr
END(spurious_entries_start)
common_spurious:
ASM_CLAC
addl $-0x80, (%esp) /* Adjust vector into the [-256, -1] range */
SAVE_ALL switch_stacks=1
ENCODE_FRAME_POINTER
TRACE_IRQS_OFF
movl %esp, %eax
call smp_spurious_interrupt
jmp ret_from_intr
ENDPROC(common_spurious)
#endif
/*
* the CPU automatically disables interrupts when executing an IRQ vector,
* so IRQ-flags tracing has to follow that:
+26 -4
View File
@@ -375,6 +375,18 @@ ENTRY(irq_entries_start)
.endr
END(irq_entries_start)
.align 8
ENTRY(spurious_entries_start)
vector=FIRST_SYSTEM_VECTOR
.rept (NR_VECTORS - FIRST_SYSTEM_VECTOR)
UNWIND_HINT_IRET_REGS
pushq $(~vector+0x80) /* Note: always in signed byte range */
jmp common_spurious
.align 8
vector=vector+1
.endr
END(spurious_entries_start)
.macro DEBUG_ENTRY_ASSERT_IRQS_OFF
#ifdef CONFIG_DEBUG_ENTRY
pushq %rax
@@ -571,10 +583,20 @@ _ASM_NOKPROBE(interrupt_entry)
/* Interrupt entry/exit. */
/*
* The interrupt stubs push (~vector+0x80) onto the stack and
* then jump to common_interrupt.
*/
/*
* The interrupt stubs push (~vector+0x80) onto the stack and
* then jump to common_spurious/interrupt.
*/
common_spurious:
addq $-0x80, (%rsp) /* Adjust vector to [-256, -1] range */
call interrupt_entry
UNWIND_HINT_REGS indirect=1
call smp_spurious_interrupt /* rdi points to pt_regs */
jmp ret_from_intr
END(common_spurious)
_ASM_NOKPROBE(common_spurious)
/* common_interrupt is a hotpath. Align it */
.p2align CONFIG_X86_L1_CACHE_SHIFT
common_interrupt:
addq $-0x80, (%rsp) /* Adjust vector to [-256, -1] range */
+11 -4
View File
@@ -202,15 +202,22 @@ static int amd_uncore_event_init(struct perf_event *event)
hwc->config = event->attr.config & AMD64_RAW_EVENT_MASK_NB;
hwc->idx = -1;
if (event->cpu < 0)
return -EINVAL;
/*
* SliceMask and ThreadMask need to be set for certain L3 events in
* Family 17h. For other events, the two fields do not affect the count.
*/
if (l3_mask)
hwc->config |= (AMD64_L3_SLICE_MASK | AMD64_L3_THREAD_MASK);
if (l3_mask && is_llc_event(event)) {
int thread = 2 * (cpu_data(event->cpu).cpu_core_id % 4);
if (event->cpu < 0)
return -EINVAL;
if (smp_num_siblings > 1)
thread += cpu_data(event->cpu).apicid & 1;
hwc->config |= (1ULL << (AMD64_L3_THREAD_SHIFT + thread) &
AMD64_L3_THREAD_MASK) | AMD64_L3_SLICE_MASK;
}
uncore = event_to_amd_uncore(event);
if (!uncore)
+20 -9
View File
@@ -20,6 +20,7 @@
#include <asm/intel-family.h>
#include <asm/apic.h>
#include <asm/cpu_device_id.h>
#include <asm/hypervisor.h>
#include "../perf_event.h"
@@ -2160,12 +2161,10 @@ static void intel_pmu_disable_event(struct perf_event *event)
cpuc->intel_ctrl_host_mask &= ~(1ull << hwc->idx);
cpuc->intel_cp_status &= ~(1ull << hwc->idx);
if (unlikely(hwc->config_base == MSR_ARCH_PERFMON_FIXED_CTR_CTRL)) {
if (unlikely(hwc->config_base == MSR_ARCH_PERFMON_FIXED_CTR_CTRL))
intel_pmu_disable_fixed(hwc);
return;
}
x86_pmu_disable_event(event);
else
x86_pmu_disable_event(event);
/*
* Needs to be called after x86_pmu_disable_event,
@@ -4054,6 +4053,13 @@ static bool check_msr(unsigned long msr, u64 mask)
{
u64 val_old, val_new, val_tmp;
/*
* Disable the check for real HW, so we don't
* mess with potentionaly enabled registers:
*/
if (hypervisor_is_type(X86_HYPER_NATIVE))
return true;
/*
* Read the current value, change it and read it back to see if it
* matches, this is needed to detect certain hardware emulators
@@ -4439,6 +4445,7 @@ __init int intel_pmu_init(void)
struct event_constraint *c;
unsigned int unused;
struct extra_reg *er;
bool pmem = false;
int version, i;
char *name;
@@ -4890,9 +4897,10 @@ __init int intel_pmu_init(void)
name = "knights-landing";
break;
case INTEL_FAM6_SKYLAKE_X:
pmem = true;
case INTEL_FAM6_SKYLAKE_MOBILE:
case INTEL_FAM6_SKYLAKE_DESKTOP:
case INTEL_FAM6_SKYLAKE_X:
case INTEL_FAM6_KABYLAKE_MOBILE:
case INTEL_FAM6_KABYLAKE_DESKTOP:
x86_add_quirk(intel_pebs_isolation_quirk);
@@ -4925,8 +4933,7 @@ __init int intel_pmu_init(void)
x86_pmu.cpu_events = hsw_events_attrs;
mem_attr = hsw_mem_events_attrs;
tsx_attr = hsw_tsx_events_attrs;
intel_pmu_pebs_data_source_skl(
boot_cpu_data.x86_model == INTEL_FAM6_SKYLAKE_X);
intel_pmu_pebs_data_source_skl(pmem);
if (boot_cpu_has(X86_FEATURE_TSX_FORCE_ABORT)) {
x86_pmu.flags |= PMU_FL_TFA;
@@ -4940,7 +4947,11 @@ __init int intel_pmu_init(void)
name = "skylake";
break;
case INTEL_FAM6_ICELAKE_X:
case INTEL_FAM6_ICELAKE_XEON_D:
pmem = true;
case INTEL_FAM6_ICELAKE_MOBILE:
case INTEL_FAM6_ICELAKE_DESKTOP:
x86_pmu.late_ack = true;
memcpy(hw_cache_event_ids, skl_hw_cache_event_ids, sizeof(hw_cache_event_ids));
memcpy(hw_cache_extra_regs, skl_hw_cache_extra_regs, sizeof(hw_cache_extra_regs));
@@ -4963,7 +4974,7 @@ __init int intel_pmu_init(void)
x86_pmu.cpu_events = get_icl_events_attrs();
x86_pmu.rtm_abort_event = X86_CONFIG(.event=0xca, .umask=0x02);
x86_pmu.lbr_pt_coexist = true;
intel_pmu_pebs_data_source_skl(false);
intel_pmu_pebs_data_source_skl(pmem);
pr_cont("Icelake events, ");
name = "icelake";
break;
+1
View File
@@ -1400,6 +1400,7 @@ static const struct x86_cpu_id intel_uncore_match[] __initconst = {
X86_UNCORE_MODEL_MATCH(INTEL_FAM6_KABYLAKE_MOBILE, skl_uncore_init),
X86_UNCORE_MODEL_MATCH(INTEL_FAM6_KABYLAKE_DESKTOP, skl_uncore_init),
X86_UNCORE_MODEL_MATCH(INTEL_FAM6_ICELAKE_MOBILE, icl_uncore_init),
X86_UNCORE_MODEL_MATCH(INTEL_FAM6_ICELAKE_NNPI, icl_uncore_init),
{},
};
+10
View File
@@ -419,6 +419,16 @@ static inline bool is_freerunning_event(struct perf_event *event)
(((cfg >> 8) & 0xff) >= UNCORE_FREERUNNING_UMASK_START);
}
/* Check and reject invalid config */
static inline int uncore_freerunning_hw_config(struct intel_uncore_box *box,
struct perf_event *event)
{
if (is_freerunning_event(event))
return 0;
return -EINVAL;
}
static inline void uncore_disable_box(struct intel_uncore_box *box)
{
if (box->pmu->type->ops->disable_box)
+1
View File
@@ -3585,6 +3585,7 @@ static struct uncore_event_desc skx_uncore_iio_freerunning_events[] = {
static struct intel_uncore_ops skx_uncore_iio_freerunning_ops = {
.read_counter = uncore_msr_read_counter,
.hw_config = uncore_freerunning_hw_config,
};
static struct attribute *skx_uncore_iio_freerunning_formats_attr[] = {
+11 -2
View File
@@ -111,8 +111,17 @@ static int hv_cpu_init(unsigned int cpu)
if (!hv_vp_assist_page)
return 0;
if (!*hvp)
*hvp = __vmalloc(PAGE_SIZE, GFP_KERNEL, PAGE_KERNEL);
/*
* The VP ASSIST PAGE is an "overlay" page (see Hyper-V TLFS's Section
* 5.2.1 "GPA Overlay Pages"). Here it must be zeroed out to make sure
* we always write the EOI MSR in hv_apic_eoi_write() *after* the
* EOI optimization is disabled in hv_cpu_die(), otherwise a CPU may
* not be stopped in the case of CPU offlining and the VM will hang.
*/
if (!*hvp) {
*hvp = __vmalloc(PAGE_SIZE, GFP_KERNEL | __GFP_ZERO,
PAGE_KERNEL);
}
if (*hvp) {
u64 val;
+4 -4
View File
@@ -54,7 +54,7 @@ static __always_inline void arch_atomic_add(int i, atomic_t *v)
{
asm volatile(LOCK_PREFIX "addl %1,%0"
: "+m" (v->counter)
: "ir" (i));
: "ir" (i) : "memory");
}
/**
@@ -68,7 +68,7 @@ static __always_inline void arch_atomic_sub(int i, atomic_t *v)
{
asm volatile(LOCK_PREFIX "subl %1,%0"
: "+m" (v->counter)
: "ir" (i));
: "ir" (i) : "memory");
}
/**
@@ -95,7 +95,7 @@ static __always_inline bool arch_atomic_sub_and_test(int i, atomic_t *v)
static __always_inline void arch_atomic_inc(atomic_t *v)
{
asm volatile(LOCK_PREFIX "incl %0"
: "+m" (v->counter));
: "+m" (v->counter) :: "memory");
}
#define arch_atomic_inc arch_atomic_inc
@@ -108,7 +108,7 @@ static __always_inline void arch_atomic_inc(atomic_t *v)
static __always_inline void arch_atomic_dec(atomic_t *v)
{
asm volatile(LOCK_PREFIX "decl %0"
: "+m" (v->counter));
: "+m" (v->counter) :: "memory");
}
#define arch_atomic_dec arch_atomic_dec
+4 -4
View File
@@ -45,7 +45,7 @@ static __always_inline void arch_atomic64_add(long i, atomic64_t *v)
{
asm volatile(LOCK_PREFIX "addq %1,%0"
: "=m" (v->counter)
: "er" (i), "m" (v->counter));
: "er" (i), "m" (v->counter) : "memory");
}
/**
@@ -59,7 +59,7 @@ static inline void arch_atomic64_sub(long i, atomic64_t *v)
{
asm volatile(LOCK_PREFIX "subq %1,%0"
: "=m" (v->counter)
: "er" (i), "m" (v->counter));
: "er" (i), "m" (v->counter) : "memory");
}
/**
@@ -87,7 +87,7 @@ static __always_inline void arch_atomic64_inc(atomic64_t *v)
{
asm volatile(LOCK_PREFIX "incq %0"
: "=m" (v->counter)
: "m" (v->counter));
: "m" (v->counter) : "memory");
}
#define arch_atomic64_inc arch_atomic64_inc
@@ -101,7 +101,7 @@ static __always_inline void arch_atomic64_dec(atomic64_t *v)
{
asm volatile(LOCK_PREFIX "decq %0"
: "=m" (v->counter)
: "m" (v->counter));
: "m" (v->counter) : "memory");
}
#define arch_atomic64_dec arch_atomic64_dec
+2 -2
View File
@@ -80,8 +80,8 @@ do { \
})
/* Atomic operations are already serializing on x86 */
#define __smp_mb__before_atomic() barrier()
#define __smp_mb__after_atomic() barrier()
#define __smp_mb__before_atomic() do { } while (0)
#define __smp_mb__after_atomic() do { } while (0)
#include <asm-generic/barrier.h>
+2
View File
@@ -239,12 +239,14 @@
#define X86_FEATURE_BMI1 ( 9*32+ 3) /* 1st group bit manipulation extensions */
#define X86_FEATURE_HLE ( 9*32+ 4) /* Hardware Lock Elision */
#define X86_FEATURE_AVX2 ( 9*32+ 5) /* AVX2 instructions */
#define X86_FEATURE_FDP_EXCPTN_ONLY ( 9*32+ 6) /* "" FPU data pointer updated only on x87 exceptions */
#define X86_FEATURE_SMEP ( 9*32+ 7) /* Supervisor Mode Execution Protection */
#define X86_FEATURE_BMI2 ( 9*32+ 8) /* 2nd group bit manipulation extensions */
#define X86_FEATURE_ERMS ( 9*32+ 9) /* Enhanced REP MOVSB/STOSB instructions */
#define X86_FEATURE_INVPCID ( 9*32+10) /* Invalidate Processor Context ID */
#define X86_FEATURE_RTM ( 9*32+11) /* Restricted Transactional Memory */
#define X86_FEATURE_CQM ( 9*32+12) /* Cache QoS Monitoring */
#define X86_FEATURE_ZERO_FCS_FDS ( 9*32+13) /* "" Zero out FPU CS and FPU DS */
#define X86_FEATURE_MPX ( 9*32+14) /* Memory Protection Extension */
#define X86_FEATURE_RDT_A ( 9*32+15) /* Resource Director Technology Allocation */
#define X86_FEATURE_AVX512F ( 9*32+16) /* AVX-512 Foundation */
+4 -1
View File
@@ -150,8 +150,11 @@ extern char irq_entries_start[];
#define trace_irq_entries_start irq_entries_start
#endif
extern char spurious_entries_start[];
#define VECTOR_UNUSED NULL
#define VECTOR_RETRIGGERED ((void *)~0UL)
#define VECTOR_SHUTDOWN ((void *)~0UL)
#define VECTOR_RETRIGGERED ((void *)~1UL)
typedef struct irq_desc* vector_irq_t[NR_VECTORS];
DECLARE_PER_CPU(vector_irq_t, vector_irq);
+1
View File
@@ -56,6 +56,7 @@
#define INTEL_FAM6_ICELAKE_XEON_D 0x6C
#define INTEL_FAM6_ICELAKE_DESKTOP 0x7D
#define INTEL_FAM6_ICELAKE_MOBILE 0x7E
#define INTEL_FAM6_ICELAKE_NNPI 0x9D
/* "Small Core" Processors (Atom) */
+23 -12
View File
@@ -2041,21 +2041,32 @@ __visible void __irq_entry smp_spurious_interrupt(struct pt_regs *regs)
entering_irq();
trace_spurious_apic_entry(vector);
/*
* Check if this really is a spurious interrupt and ACK it
* if it is a vectored one. Just in case...
* Spurious interrupts should not be ACKed.
*/
v = apic_read(APIC_ISR + ((vector & ~0x1f) >> 1));
if (v & (1 << (vector & 0x1f)))
ack_APIC_irq();
inc_irq_stat(irq_spurious_count);
/* see sw-dev-man vol 3, chapter 7.4.13.5 */
pr_info("spurious APIC interrupt through vector %02x on CPU#%d, "
"should never happen.\n", vector, smp_processor_id());
/*
* If this is a spurious interrupt then do not acknowledge
*/
if (vector == SPURIOUS_APIC_VECTOR) {
/* See SDM vol 3 */
pr_info("Spurious APIC interrupt (vector 0xFF) on CPU#%d, should never happen.\n",
smp_processor_id());
goto out;
}
/*
* If it is a vectored one, verify it's set in the ISR. If set,
* acknowledge it.
*/
v = apic_read(APIC_ISR + ((vector & ~0x1f) >> 1));
if (v & (1 << (vector & 0x1f))) {
pr_info("Spurious interrupt (vector 0x%02x) on CPU#%d. Acked\n",
vector, smp_processor_id());
ack_APIC_irq();
} else {
pr_info("Spurious interrupt (vector 0x%02x) on CPU#%d. Not pending!\n",
vector, smp_processor_id());
}
out:
trace_spurious_apic_exit(vector);
exiting_irq();
}
+46
View File
@@ -1893,6 +1893,50 @@ static int ioapic_set_affinity(struct irq_data *irq_data,
return ret;
}
/*
* Interrupt shutdown masks the ioapic pin, but the interrupt might already
* be in flight, but not yet serviced by the target CPU. That means
* __synchronize_hardirq() would return and claim that everything is calmed
* down. So free_irq() would proceed and deactivate the interrupt and free
* resources.
*
* Once the target CPU comes around to service it it will find a cleared
* vector and complain. While the spurious interrupt is harmless, the full
* release of resources might prevent the interrupt from being acknowledged
* which keeps the hardware in a weird state.
*
* Verify that the corresponding Remote-IRR bits are clear.
*/
static int ioapic_irq_get_chip_state(struct irq_data *irqd,
enum irqchip_irq_state which,
bool *state)
{
struct mp_chip_data *mcd = irqd->chip_data;
struct IO_APIC_route_entry rentry;
struct irq_pin_list *p;
if (which != IRQCHIP_STATE_ACTIVE)
return -EINVAL;
*state = false;
raw_spin_lock(&ioapic_lock);
for_each_irq_pin(p, mcd->irq_2_pin) {
rentry = __ioapic_read_entry(p->apic, p->pin);
/*
* The remote IRR is only valid in level trigger mode. It's
* meaning is undefined for edge triggered interrupts and
* irrelevant because the IO-APIC treats them as fire and
* forget.
*/
if (rentry.irr && rentry.trigger) {
*state = true;
break;
}
}
raw_spin_unlock(&ioapic_lock);
return 0;
}
static struct irq_chip ioapic_chip __read_mostly = {
.name = "IO-APIC",
.irq_startup = startup_ioapic_irq,
@@ -1902,6 +1946,7 @@ static struct irq_chip ioapic_chip __read_mostly = {
.irq_eoi = ioapic_ack_level,
.irq_set_affinity = ioapic_set_affinity,
.irq_retrigger = irq_chip_retrigger_hierarchy,
.irq_get_irqchip_state = ioapic_irq_get_chip_state,
.flags = IRQCHIP_SKIP_SET_WAKE,
};
@@ -1914,6 +1959,7 @@ static struct irq_chip ioapic_ir_chip __read_mostly = {
.irq_eoi = ioapic_ir_ack_level,
.irq_set_affinity = ioapic_set_affinity,
.irq_retrigger = irq_chip_retrigger_hierarchy,
.irq_get_irqchip_state = ioapic_irq_get_chip_state,
.flags = IRQCHIP_SKIP_SET_WAKE,
};
+2 -2
View File
@@ -340,7 +340,7 @@ static void clear_irq_vector(struct irq_data *irqd)
trace_vector_clear(irqd->irq, vector, apicd->cpu, apicd->prev_vector,
apicd->prev_cpu);
per_cpu(vector_irq, apicd->cpu)[vector] = VECTOR_UNUSED;
per_cpu(vector_irq, apicd->cpu)[vector] = VECTOR_SHUTDOWN;
irq_matrix_free(vector_matrix, apicd->cpu, vector, managed);
apicd->vector = 0;
@@ -349,7 +349,7 @@ static void clear_irq_vector(struct irq_data *irqd)
if (!vector)
return;
per_cpu(vector_irq, apicd->prev_cpu)[vector] = VECTOR_UNUSED;
per_cpu(vector_irq, apicd->prev_cpu)[vector] = VECTOR_SHUTDOWN;
irq_matrix_free(vector_matrix, apicd->prev_cpu, vector, managed);
apicd->prev_vector = 0;
apicd->move_in_progress = 0;
+1 -2
View File
@@ -658,8 +658,7 @@ void cacheinfo_amd_init_llc_id(struct cpuinfo_x86 *c, int cpu, u8 node_id)
if (c->x86 < 0x17) {
/* LLC is at the node level. */
per_cpu(cpu_llc_id, cpu) = node_id;
} else if (c->x86 == 0x17 &&
c->x86_model >= 0 && c->x86_model <= 0x1F) {
} else if (c->x86 == 0x17 && c->x86_model <= 0x1F) {
/*
* LLC is at the core complex level.
* Core complex ID is ApicId[3] for these processors.
+2
View File
@@ -4,6 +4,8 @@
# Generate the x86_cap/bug_flags[] arrays from include/asm/cpufeatures.h
#
set -e
IN=$1
OUT=$2
+2 -1
View File
@@ -319,7 +319,8 @@ void __init idt_setup_apic_and_irq_gates(void)
#ifdef CONFIG_X86_LOCAL_APIC
for_each_clear_bit_from(i, system_vectors, NR_VECTORS) {
set_bit(i, system_vectors);
set_intr_gate(i, spurious_interrupt);
entry = spurious_entries_start + 8 * (i - FIRST_SYSTEM_VECTOR);
set_intr_gate(i, entry);
}
#endif
}
+1 -1
View File
@@ -247,7 +247,7 @@ __visible unsigned int __irq_entry do_IRQ(struct pt_regs *regs)
if (!handle_irq(desc, regs)) {
ack_APIC_irq();
if (desc != VECTOR_RETRIGGERED) {
if (desc != VECTOR_RETRIGGERED && desc != VECTOR_SHUTDOWN) {
pr_emerg_ratelimited("%s: %d.%d No irq handler for vector\n",
__func__, smp_processor_id(),
vector);
+4 -6
View File
@@ -546,17 +546,15 @@ void __init default_get_smp_config(unsigned int early)
* local APIC has default address
*/
mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
return;
goto out;
}
pr_info("Default MP configuration #%d\n", mpf->feature1);
construct_default_ISA_mptable(mpf->feature1);
} else if (mpf->physptr) {
if (check_physptr(mpf, early)) {
early_memunmap(mpf, sizeof(*mpf));
return;
}
if (check_physptr(mpf, early))
goto out;
} else
BUG();
@@ -565,7 +563,7 @@ void __init default_get_smp_config(unsigned int early)
/*
* Only use the first configuration found.
*/
out:
early_memunmap(mpf, sizeof(*mpf));
}
+4 -1
View File
@@ -25,6 +25,7 @@
#include <linux/rcupdate.h>
#include <linux/export.h>
#include <linux/context_tracking.h>
#include <linux/nospec.h>
#include <linux/uaccess.h>
#include <asm/pgtable.h>
@@ -643,9 +644,11 @@ static unsigned long ptrace_get_debugreg(struct task_struct *tsk, int n)
{
struct thread_struct *thread = &tsk->thread;
unsigned long val = 0;
int index = n;
if (n < HBP_NUM) {
struct perf_event *bp = thread->ptrace_bps[n];
struct perf_event *bp = thread->ptrace_bps[index];
index = array_index_nospec(index, HBP_NUM);
if (bp)
val = bp->hw.info.address;
+3 -5
View File
@@ -129,11 +129,9 @@ void arch_stack_walk_user(stack_trace_consume_fn consume_entry, void *cookie,
break;
if ((unsigned long)fp < regs->sp)
break;
if (frame.ret_addr) {
if (!consume_entry(cookie, frame.ret_addr, false))
return;
}
if (fp == frame.next_fp)
if (!frame.ret_addr)
break;
if (!consume_entry(cookie, frame.ret_addr, false))
break;
fp = frame.next_fp;
}
+7 -2
View File
@@ -5,6 +5,7 @@
#include <linux/user.h>
#include <linux/regset.h>
#include <linux/syscalls.h>
#include <linux/nospec.h>
#include <linux/uaccess.h>
#include <asm/desc.h>
@@ -220,6 +221,7 @@ int do_get_thread_area(struct task_struct *p, int idx,
struct user_desc __user *u_info)
{
struct user_desc info;
int index;
if (idx == -1 && get_user(idx, &u_info->entry_number))
return -EFAULT;
@@ -227,8 +229,11 @@ int do_get_thread_area(struct task_struct *p, int idx,
if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
return -EINVAL;
fill_user_desc(&info, idx,
&p->thread.tls_array[idx - GDT_ENTRY_TLS_MIN]);
index = idx - GDT_ENTRY_TLS_MIN;
index = array_index_nospec(index,
GDT_ENTRY_TLS_MAX - GDT_ENTRY_TLS_MIN + 1);
fill_user_desc(&info, idx, &p->thread.tls_array[index]);
if (copy_to_user(u_info, &info, sizeof(info)))
return -EFAULT;
+3 -3
View File
@@ -141,10 +141,10 @@ SECTIONS
*(.text.__x86.indirect_thunk)
__indirect_thunk_end = .;
#endif
} :text = 0x9090
/* End of text section */
_etext = .;
/* End of text section */
_etext = .;
} :text = 0x9090
NOTES :text :note
+2 -2
View File
@@ -128,8 +128,8 @@ static void pmc_reprogram_counter(struct kvm_pmc *pmc, u32 type,
intr ? kvm_perf_overflow_intr :
kvm_perf_overflow, pmc);
if (IS_ERR(event)) {
printk_once("kvm_pmu: event creation failed %ld\n",
PTR_ERR(event));
pr_debug_ratelimited("kvm_pmu: event creation failed %ld for pmc->idx = %d\n",
PTR_ERR(event), pmc->idx);
return;
}
+6 -10
View File
@@ -2234,13 +2234,9 @@ static void prepare_vmcs02_full(struct vcpu_vmx *vmx, struct vmcs12 *vmcs12)
set_cr4_guest_host_mask(vmx);
if (kvm_mpx_supported()) {
if (vmx->nested.nested_run_pending &&
(vmcs12->vm_entry_controls & VM_ENTRY_LOAD_BNDCFGS))
vmcs_write64(GUEST_BNDCFGS, vmcs12->guest_bndcfgs);
else
vmcs_write64(GUEST_BNDCFGS, vmx->nested.vmcs01_guest_bndcfgs);
}
if (kvm_mpx_supported() && vmx->nested.nested_run_pending &&
(vmcs12->vm_entry_controls & VM_ENTRY_LOAD_BNDCFGS))
vmcs_write64(GUEST_BNDCFGS, vmcs12->guest_bndcfgs);
}
/*
@@ -2283,6 +2279,9 @@ static int prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12,
kvm_set_dr(vcpu, 7, vcpu->arch.dr7);
vmcs_write64(GUEST_IA32_DEBUGCTL, vmx->nested.vmcs01_debugctl);
}
if (kvm_mpx_supported() && (!vmx->nested.nested_run_pending ||
!(vmcs12->vm_entry_controls & VM_ENTRY_LOAD_BNDCFGS)))
vmcs_write64(GUEST_BNDCFGS, vmx->nested.vmcs01_guest_bndcfgs);
vmx_set_rflags(vcpu, vmcs12->guest_rflags);
/* EXCEPTION_BITMAP and CR0_GUEST_HOST_MASK should basically be the
@@ -2878,9 +2877,6 @@ static void nested_get_vmcs12_pages(struct kvm_vcpu *vcpu)
*/
vmcs_clear_bits(CPU_BASED_VM_EXEC_CONTROL,
CPU_BASED_TPR_SHADOW);
} else {
printk("bad virtual-APIC page address\n");
dump_vmcs();
}
}
+19 -16
View File
@@ -1718,7 +1718,10 @@ static int vmx_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
return vmx_get_vmx_msr(&vmx->nested.msrs, msr_info->index,
&msr_info->data);
case MSR_IA32_XSS:
if (!vmx_xsaves_supported())
if (!vmx_xsaves_supported() ||
(!msr_info->host_initiated &&
!(guest_cpuid_has(vcpu, X86_FEATURE_XSAVE) &&
guest_cpuid_has(vcpu, X86_FEATURE_XSAVES))))
return 1;
msr_info->data = vcpu->arch.ia32_xss;
break;
@@ -1896,9 +1899,10 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
MSR_TYPE_W);
break;
case MSR_IA32_CR_PAT:
if (!kvm_pat_valid(data))
return 1;
if (vmcs_config.vmentry_ctrl & VM_ENTRY_LOAD_IA32_PAT) {
if (!kvm_pat_valid(data))
return 1;
vmcs_write64(GUEST_IA32_PAT, data);
vcpu->arch.pat = data;
break;
@@ -1932,7 +1936,10 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
return 1;
return vmx_set_vmx_msr(vcpu, msr_index, data);
case MSR_IA32_XSS:
if (!vmx_xsaves_supported())
if (!vmx_xsaves_supported() ||
(!msr_info->host_initiated &&
!(guest_cpuid_has(vcpu, X86_FEATURE_XSAVE) &&
guest_cpuid_has(vcpu, X86_FEATURE_XSAVES))))
return 1;
/*
* The only supported bit as of Skylake is bit 8, but
@@ -6109,28 +6116,21 @@ static void vmx_apicv_post_state_restore(struct kvm_vcpu *vcpu)
static void vmx_complete_atomic_exit(struct vcpu_vmx *vmx)
{
u32 exit_intr_info = 0;
u16 basic_exit_reason = (u16)vmx->exit_reason;
if (!(basic_exit_reason == EXIT_REASON_MCE_DURING_VMENTRY
|| basic_exit_reason == EXIT_REASON_EXCEPTION_NMI))
if (vmx->exit_reason != EXIT_REASON_EXCEPTION_NMI)
return;
if (!(vmx->exit_reason & VMX_EXIT_REASONS_FAILED_VMENTRY))
exit_intr_info = vmcs_read32(VM_EXIT_INTR_INFO);
vmx->exit_intr_info = exit_intr_info;
vmx->exit_intr_info = vmcs_read32(VM_EXIT_INTR_INFO);
/* if exit due to PF check for async PF */
if (is_page_fault(exit_intr_info))
if (is_page_fault(vmx->exit_intr_info))
vmx->vcpu.arch.apf.host_apf_reason = kvm_read_and_reset_pf_reason();
/* Handle machine checks before interrupts are enabled */
if (basic_exit_reason == EXIT_REASON_MCE_DURING_VMENTRY ||
is_machine_check(exit_intr_info))
if (is_machine_check(vmx->exit_intr_info))
kvm_machine_check();
/* We need to handle NMIs before interrupts are enabled */
if (is_nmi(exit_intr_info)) {
if (is_nmi(vmx->exit_intr_info)) {
kvm_before_interrupt(&vmx->vcpu);
asm("int $2");
kvm_after_interrupt(&vmx->vcpu);
@@ -6533,6 +6533,9 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu)
vmx->idt_vectoring_info = 0;
vmx->exit_reason = vmx->fail ? 0xdead : vmcs_read32(VM_EXIT_REASON);
if ((u16)vmx->exit_reason == EXIT_REASON_MCE_DURING_VMENTRY)
kvm_machine_check();
if (vmx->fail || (vmx->exit_reason & VMX_EXIT_REASONS_FAILED_VMENTRY))
return;
+8 -1
View File
@@ -4584,6 +4584,7 @@ static void bfq_exit_icq_bfqq(struct bfq_io_cq *bic, bool is_sync)
unsigned long flags;
spin_lock_irqsave(&bfqd->lock, flags);
bfqq->bic = NULL;
bfq_exit_bfqq(bfqd, bfqq);
bic_set_bfqq(bic, NULL, is_sync);
spin_unlock_irqrestore(&bfqd->lock, flags);
@@ -5397,8 +5398,14 @@ static void bfq_update_inject_limit(struct bfq_data *bfqd,
* total service time, and there seem to be the right
* conditions to do it, or we can lower the last base value
* computed.
*
* NOTE: (bfqd->rq_in_driver == 1) means that there is no I/O
* request in flight, because this function is in the code
* path that handles the completion of a request of bfqq, and,
* in particular, this function is executed before
* bfqd->rq_in_driver is decremented in such a code path.
*/
if ((bfqq->last_serv_time_ns == 0 && bfqd->rq_in_driver == 0) ||
if ((bfqq->last_serv_time_ns == 0 && bfqd->rq_in_driver == 1) ||
tot_time_ns < bfqq->last_serv_time_ns) {
bfqq->last_serv_time_ns = tot_time_ns;
/*
+32 -6
View File
@@ -16,6 +16,7 @@
#include <linux/workqueue.h>
#include <linux/cgroup.h>
#include <linux/blk-cgroup.h>
#include <linux/highmem.h>
#include <trace/events/block.h>
#include "blk.h"
@@ -731,7 +732,7 @@ static int __bio_add_pc_page(struct request_queue *q, struct bio *bio,
}
}
if (bio_full(bio))
if (bio_full(bio, len))
return 0;
if (bio->bi_phys_segments >= queue_max_segments(q))
@@ -807,7 +808,7 @@ void __bio_add_page(struct bio *bio, struct page *page,
struct bio_vec *bv = &bio->bi_io_vec[bio->bi_vcnt];
WARN_ON_ONCE(bio_flagged(bio, BIO_CLONED));
WARN_ON_ONCE(bio_full(bio));
WARN_ON_ONCE(bio_full(bio, len));
bv->bv_page = page;
bv->bv_offset = off;
@@ -834,7 +835,7 @@ int bio_add_page(struct bio *bio, struct page *page,
bool same_page = false;
if (!__bio_try_merge_page(bio, page, len, offset, &same_page)) {
if (bio_full(bio))
if (bio_full(bio, len))
return 0;
__bio_add_page(bio, page, len, offset);
}
@@ -922,7 +923,7 @@ static int __bio_iov_iter_get_pages(struct bio *bio, struct iov_iter *iter)
if (same_page)
put_page(page);
} else {
if (WARN_ON_ONCE(bio_full(bio)))
if (WARN_ON_ONCE(bio_full(bio, len)))
return -EINVAL;
__bio_add_page(bio, page, len, offset);
}
@@ -966,7 +967,7 @@ int bio_iov_iter_get_pages(struct bio *bio, struct iov_iter *iter)
ret = __bio_iov_bvec_add_pages(bio, iter);
else
ret = __bio_iov_iter_get_pages(bio, iter);
} while (!ret && iov_iter_count(iter) && !bio_full(bio));
} while (!ret && iov_iter_count(iter) && !bio_full(bio, 0));
if (iov_iter_bvec_no_ref(iter))
bio_set_flag(bio, BIO_NO_PAGE_REF);
@@ -1479,8 +1480,22 @@ void bio_unmap_user(struct bio *bio)
bio_put(bio);
}
static void bio_invalidate_vmalloc_pages(struct bio *bio)
{
#ifdef ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
if (bio->bi_private && !op_is_write(bio_op(bio))) {
unsigned long i, len = 0;
for (i = 0; i < bio->bi_vcnt; i++)
len += bio->bi_io_vec[i].bv_len;
invalidate_kernel_vmap_range(bio->bi_private, len);
}
#endif
}
static void bio_map_kern_endio(struct bio *bio)
{
bio_invalidate_vmalloc_pages(bio);
bio_put(bio);
}
@@ -1501,6 +1516,8 @@ struct bio *bio_map_kern(struct request_queue *q, void *data, unsigned int len,
unsigned long end = (kaddr + len + PAGE_SIZE - 1) >> PAGE_SHIFT;
unsigned long start = kaddr >> PAGE_SHIFT;
const int nr_pages = end - start;
bool is_vmalloc = is_vmalloc_addr(data);
struct page *page;
int offset, i;
struct bio *bio;
@@ -1508,6 +1525,11 @@ struct bio *bio_map_kern(struct request_queue *q, void *data, unsigned int len,
if (!bio)
return ERR_PTR(-ENOMEM);
if (is_vmalloc) {
flush_kernel_vmap_range(data, len);
bio->bi_private = data;
}
offset = offset_in_page(kaddr);
for (i = 0; i < nr_pages; i++) {
unsigned int bytes = PAGE_SIZE - offset;
@@ -1518,7 +1540,11 @@ struct bio *bio_map_kern(struct request_queue *q, void *data, unsigned int len,
if (bytes > len)
bytes = len;
if (bio_add_pc_page(q, bio, virt_to_page(data), bytes,
if (!is_vmalloc)
page = virt_to_page(data);
else
page = vmalloc_to_page(data);
if (bio_add_pc_page(q, bio, page, bytes,
offset) < bytes) {
/* we don't support partial mappings */
bio_put(bio);
+6 -2
View File
@@ -1006,8 +1006,12 @@ static int blkcg_print_stat(struct seq_file *sf, void *v)
}
next:
if (has_stats) {
off += scnprintf(buf+off, size-off, "\n");
seq_commit(sf, off);
if (off < size - 1) {
off += scnprintf(buf+off, size-off, "\n");
seq_commit(sf, off);
} else {
seq_commit(sf, -1);
}
}
}
+17 -34
View File
@@ -618,44 +618,26 @@ static void blkcg_iolatency_done_bio(struct rq_qos *rqos, struct bio *bio)
inflight = atomic_dec_return(&rqw->inflight);
WARN_ON_ONCE(inflight < 0);
if (iolat->min_lat_nsec == 0)
goto next;
iolatency_record_time(iolat, &bio->bi_issue, now,
issue_as_root);
window_start = atomic64_read(&iolat->window_start);
if (now > window_start &&
(now - window_start) >= iolat->cur_win_nsec) {
if (atomic64_cmpxchg(&iolat->window_start,
window_start, now) == window_start)
iolatency_check_latencies(iolat, now);
/*
* If bi_status is BLK_STS_AGAIN, the bio wasn't actually
* submitted, so do not account for it.
*/
if (iolat->min_lat_nsec && bio->bi_status != BLK_STS_AGAIN) {
iolatency_record_time(iolat, &bio->bi_issue, now,
issue_as_root);
window_start = atomic64_read(&iolat->window_start);
if (now > window_start &&
(now - window_start) >= iolat->cur_win_nsec) {
if (atomic64_cmpxchg(&iolat->window_start,
window_start, now) == window_start)
iolatency_check_latencies(iolat, now);
}
}
next:
wake_up(&rqw->wait);
blkg = blkg->parent;
}
}
static void blkcg_iolatency_cleanup(struct rq_qos *rqos, struct bio *bio)
{
struct blkcg_gq *blkg;
blkg = bio->bi_blkg;
while (blkg && blkg->parent) {
struct rq_wait *rqw;
struct iolatency_grp *iolat;
iolat = blkg_to_lat(blkg);
if (!iolat)
goto next;
rqw = &iolat->rq_wait;
atomic_dec(&rqw->inflight);
wake_up(&rqw->wait);
next:
blkg = blkg->parent;
}
}
static void blkcg_iolatency_exit(struct rq_qos *rqos)
{
struct blk_iolatency *blkiolat = BLKIOLATENCY(rqos);
@@ -667,7 +649,6 @@ static void blkcg_iolatency_exit(struct rq_qos *rqos)
static struct rq_qos_ops blkcg_iolatency_ops = {
.throttle = blkcg_iolatency_throttle,
.cleanup = blkcg_iolatency_cleanup,
.done_bio = blkcg_iolatency_done_bio,
.exit = blkcg_iolatency_exit,
};
@@ -778,8 +759,10 @@ static int iolatency_set_min_lat_nsec(struct blkcg_gq *blkg, u64 val)
if (!oldval && val)
return 1;
if (oldval && !val)
if (oldval && !val) {
blkcg_clear_delay(blkg);
return -1;
}
return 0;
}
+3 -6
View File
@@ -881,13 +881,10 @@ static bool tg_with_in_iops_limit(struct throtl_grp *tg, struct bio *bio,
unsigned long jiffy_elapsed, jiffy_wait, jiffy_elapsed_rnd;
u64 tmp;
jiffy_elapsed = jiffy_elapsed_rnd = jiffies - tg->slice_start[rw];
jiffy_elapsed = jiffies - tg->slice_start[rw];
/* Slice has just started. Consider one slice interval */
if (!jiffy_elapsed)
jiffy_elapsed_rnd = tg->td->throtl_slice;
jiffy_elapsed_rnd = roundup(jiffy_elapsed_rnd, tg->td->throtl_slice);
/* Round up to the next throttle slice, wait time must be nonzero */
jiffy_elapsed_rnd = roundup(jiffy_elapsed + 1, tg->td->throtl_slice);
/*
* jiffy_elapsed_rnd should not be a big value as minimum iops can be
+1 -1
View File
@@ -70,7 +70,7 @@ EXPORT_SYMBOL_GPL(__blk_req_zone_write_unlock);
static inline unsigned int __blkdev_nr_zones(struct request_queue *q,
sector_t nr_sectors)
{
unsigned long zone_sectors = blk_queue_zone_sectors(q);
sector_t zone_sectors = blk_queue_zone_sectors(q);
return (nr_sectors + zone_sectors - 1) >> ilog2(zone_sectors);
}
+3
View File
@@ -15,6 +15,7 @@ config ASYMMETRIC_PUBLIC_KEY_SUBTYPE
select MPILIB
select CRYPTO_HASH_INFO
select CRYPTO_AKCIPHER
select CRYPTO_HASH
help
This option provides support for asymmetric public key type handling.
If signature generation and/or verification are to be used,
@@ -65,6 +66,7 @@ config TPM_KEY_PARSER
config PKCS7_MESSAGE_PARSER
tristate "PKCS#7 message parser"
depends on X509_CERTIFICATE_PARSER
select CRYPTO_HASH
select ASN1
select OID_REGISTRY
help
@@ -87,6 +89,7 @@ config SIGNED_PE_FILE_VERIFICATION
bool "Support for PE file signature verification"
depends on PKCS7_MESSAGE_PARSER=y
depends on SYSTEM_DATA_VERIFICATION
select CRYPTO_HASH
select ASN1
select OID_REGISTRY
help
+19 -11
View File
@@ -61,6 +61,8 @@ struct chachapoly_req_ctx {
unsigned int cryptlen;
/* Actual AD, excluding IV */
unsigned int assoclen;
/* request flags, with MAY_SLEEP cleared if needed */
u32 flags;
union {
struct poly_req poly;
struct chacha_req chacha;
@@ -70,8 +72,12 @@ struct chachapoly_req_ctx {
static inline void async_done_continue(struct aead_request *req, int err,
int (*cont)(struct aead_request *))
{
if (!err)
if (!err) {
struct chachapoly_req_ctx *rctx = aead_request_ctx(req);
rctx->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP;
err = cont(req);
}
if (err != -EINPROGRESS && err != -EBUSY)
aead_request_complete(req, err);
@@ -138,7 +144,7 @@ static int chacha_decrypt(struct aead_request *req)
dst = scatterwalk_ffwd(rctx->dst, req->dst, req->assoclen);
}
skcipher_request_set_callback(&creq->req, aead_request_flags(req),
skcipher_request_set_callback(&creq->req, rctx->flags,
chacha_decrypt_done, req);
skcipher_request_set_tfm(&creq->req, ctx->chacha);
skcipher_request_set_crypt(&creq->req, src, dst,
@@ -182,7 +188,7 @@ static int poly_tail(struct aead_request *req)
memcpy(&preq->tail.cryptlen, &len, sizeof(len));
sg_set_buf(preq->src, &preq->tail, sizeof(preq->tail));
ahash_request_set_callback(&preq->req, aead_request_flags(req),
ahash_request_set_callback(&preq->req, rctx->flags,
poly_tail_done, req);
ahash_request_set_tfm(&preq->req, ctx->poly);
ahash_request_set_crypt(&preq->req, preq->src,
@@ -213,7 +219,7 @@ static int poly_cipherpad(struct aead_request *req)
sg_init_table(preq->src, 1);
sg_set_buf(preq->src, &preq->pad, padlen);
ahash_request_set_callback(&preq->req, aead_request_flags(req),
ahash_request_set_callback(&preq->req, rctx->flags,
poly_cipherpad_done, req);
ahash_request_set_tfm(&preq->req, ctx->poly);
ahash_request_set_crypt(&preq->req, preq->src, NULL, padlen);
@@ -244,7 +250,7 @@ static int poly_cipher(struct aead_request *req)
sg_init_table(rctx->src, 2);
crypt = scatterwalk_ffwd(rctx->src, crypt, req->assoclen);
ahash_request_set_callback(&preq->req, aead_request_flags(req),
ahash_request_set_callback(&preq->req, rctx->flags,
poly_cipher_done, req);
ahash_request_set_tfm(&preq->req, ctx->poly);
ahash_request_set_crypt(&preq->req, crypt, NULL, rctx->cryptlen);
@@ -274,7 +280,7 @@ static int poly_adpad(struct aead_request *req)
sg_init_table(preq->src, 1);
sg_set_buf(preq->src, preq->pad, padlen);
ahash_request_set_callback(&preq->req, aead_request_flags(req),
ahash_request_set_callback(&preq->req, rctx->flags,
poly_adpad_done, req);
ahash_request_set_tfm(&preq->req, ctx->poly);
ahash_request_set_crypt(&preq->req, preq->src, NULL, padlen);
@@ -298,7 +304,7 @@ static int poly_ad(struct aead_request *req)
struct poly_req *preq = &rctx->u.poly;
int err;
ahash_request_set_callback(&preq->req, aead_request_flags(req),
ahash_request_set_callback(&preq->req, rctx->flags,
poly_ad_done, req);
ahash_request_set_tfm(&preq->req, ctx->poly);
ahash_request_set_crypt(&preq->req, req->src, NULL, rctx->assoclen);
@@ -325,7 +331,7 @@ static int poly_setkey(struct aead_request *req)
sg_init_table(preq->src, 1);
sg_set_buf(preq->src, rctx->key, sizeof(rctx->key));
ahash_request_set_callback(&preq->req, aead_request_flags(req),
ahash_request_set_callback(&preq->req, rctx->flags,
poly_setkey_done, req);
ahash_request_set_tfm(&preq->req, ctx->poly);
ahash_request_set_crypt(&preq->req, preq->src, NULL, sizeof(rctx->key));
@@ -349,7 +355,7 @@ static int poly_init(struct aead_request *req)
struct poly_req *preq = &rctx->u.poly;
int err;
ahash_request_set_callback(&preq->req, aead_request_flags(req),
ahash_request_set_callback(&preq->req, rctx->flags,
poly_init_done, req);
ahash_request_set_tfm(&preq->req, ctx->poly);
@@ -387,7 +393,7 @@ static int poly_genkey(struct aead_request *req)
chacha_iv(creq->iv, req, 0);
skcipher_request_set_callback(&creq->req, aead_request_flags(req),
skcipher_request_set_callback(&creq->req, rctx->flags,
poly_genkey_done, req);
skcipher_request_set_tfm(&creq->req, ctx->chacha);
skcipher_request_set_crypt(&creq->req, creq->src, creq->src,
@@ -427,7 +433,7 @@ static int chacha_encrypt(struct aead_request *req)
dst = scatterwalk_ffwd(rctx->dst, req->dst, req->assoclen);
}
skcipher_request_set_callback(&creq->req, aead_request_flags(req),
skcipher_request_set_callback(&creq->req, rctx->flags,
chacha_encrypt_done, req);
skcipher_request_set_tfm(&creq->req, ctx->chacha);
skcipher_request_set_crypt(&creq->req, src, dst,
@@ -445,6 +451,7 @@ static int chachapoly_encrypt(struct aead_request *req)
struct chachapoly_req_ctx *rctx = aead_request_ctx(req);
rctx->cryptlen = req->cryptlen;
rctx->flags = aead_request_flags(req);
/* encrypt call chain:
* - chacha_encrypt/done()
@@ -466,6 +473,7 @@ static int chachapoly_decrypt(struct aead_request *req)
struct chachapoly_req_ctx *rctx = aead_request_ctx(req);
rctx->cryptlen = req->cryptlen - POLY1305_DIGEST_SIZE;
rctx->flags = aead_request_flags(req);
/* decrypt call chain:
* - poly_genkey/done()
+7 -1
View File
@@ -31,6 +31,7 @@ static int ghash_setkey(struct crypto_shash *tfm,
const u8 *key, unsigned int keylen)
{
struct ghash_ctx *ctx = crypto_shash_ctx(tfm);
be128 k;
if (keylen != GHASH_BLOCK_SIZE) {
crypto_shash_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
@@ -39,7 +40,12 @@ static int ghash_setkey(struct crypto_shash *tfm,
if (ctx->gf128)
gf128mul_free_4k(ctx->gf128);
ctx->gf128 = gf128mul_init_4k_lle((be128 *)key);
BUILD_BUG_ON(sizeof(k) != GHASH_BLOCK_SIZE);
memcpy(&k, key, GHASH_BLOCK_SIZE); /* avoid violating alignment rules */
ctx->gf128 = gf128mul_init_4k_lle(&k);
memzero_explicit(&k, GHASH_BLOCK_SIZE);
if (!ctx->gf128)
return -ENOMEM;
+1 -1
View File
@@ -384,7 +384,7 @@ static int create(struct crypto_template *tmpl, struct rtattr **tb)
inst->alg.base.cra_priority = alg->base.cra_priority;
inst->alg.base.cra_blocksize = LRW_BLOCK_SIZE;
inst->alg.base.cra_alignmask = alg->base.cra_alignmask |
(__alignof__(__be32) - 1);
(__alignof__(be128) - 1);
inst->alg.ivsize = LRW_BLOCK_SIZE;
inst->alg.min_keysize = crypto_skcipher_alg_min_keysize(alg) +
+7 -1
View File
@@ -225,7 +225,13 @@
x4 ^= x2; \
})
static void __serpent_setkey_sbox(u32 r0, u32 r1, u32 r2, u32 r3, u32 r4, u32 *k)
/*
* both gcc and clang have misoptimized this function in the past,
* producing horrible object code from spilling temporary variables
* on the stack. Forcing this part out of line avoids that.
*/
static noinline void __serpent_setkey_sbox(u32 r0, u32 r1, u32 r2,
u32 r3, u32 r4, u32 *k)
{
k += 100;
S3(r3, r4, r0, r1, r2); store_and_load_keys(r1, r2, r4, r3, 28, 24);
+6
View File
@@ -1279,6 +1279,7 @@ static int test_hash_vec(const char *driver, const struct hash_testvec *vec,
req, tsgl, hashstate);
if (err)
return err;
cond_resched();
}
}
#endif
@@ -1493,6 +1494,7 @@ static int __alg_test_hash(const struct hash_testvec *vecs,
err = test_hash_vec(driver, &vecs[i], i, req, tsgl, hashstate);
if (err)
goto out;
cond_resched();
}
err = test_hash_vs_generic_impl(driver, generic_driver, maxkeysize, req,
tsgl, hashstate);
@@ -1755,6 +1757,7 @@ static int test_aead_vec(const char *driver, int enc,
&cfg, req, tsgls);
if (err)
return err;
cond_resched();
}
}
#endif
@@ -1994,6 +1997,7 @@ static int test_aead(const char *driver, int enc,
tsgls);
if (err)
return err;
cond_resched();
}
return 0;
}
@@ -2336,6 +2340,7 @@ static int test_skcipher_vec(const char *driver, int enc,
&cfg, req, tsgls);
if (err)
return err;
cond_resched();
}
}
#endif
@@ -2535,6 +2540,7 @@ static int test_skcipher(const char *driver, int enc,
tsgls);
if (err)
return err;
cond_resched();
}
return 0;
}
+2 -1
View File
@@ -69,7 +69,8 @@ acpi_status
acpi_ev_mask_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 is_masked);
acpi_status
acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info);
acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info,
u8 clear_on_enable);
acpi_status
acpi_ev_remove_gpe_reference(struct acpi_gpe_event_info *gpe_event_info);
+7 -1
View File
@@ -146,6 +146,7 @@ acpi_ev_mask_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 is_masked)
* FUNCTION: acpi_ev_add_gpe_reference
*
* PARAMETERS: gpe_event_info - Add a reference to this GPE
* clear_on_enable - Clear GPE status before enabling it
*
* RETURN: Status
*
@@ -155,7 +156,8 @@ acpi_ev_mask_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 is_masked)
******************************************************************************/
acpi_status
acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info)
acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info,
u8 clear_on_enable)
{
acpi_status status = AE_OK;
@@ -170,6 +172,10 @@ acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info)
/* Enable on first reference */
if (clear_on_enable) {
(void)acpi_hw_clear_gpe(gpe_event_info);
}
status = acpi_ev_update_gpe_enable_mask(gpe_event_info);
if (ACPI_SUCCESS(status)) {
status = acpi_ev_enable_gpe(gpe_event_info);
+1 -1
View File
@@ -453,7 +453,7 @@ acpi_ev_initialize_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
continue;
}
status = acpi_ev_add_gpe_reference(gpe_event_info);
status = acpi_ev_add_gpe_reference(gpe_event_info, FALSE);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
"Could not enable GPE 0x%02X",
+1 -1
View File
@@ -971,7 +971,7 @@ acpi_remove_gpe_handler(acpi_handle gpe_device,
ACPI_GPE_DISPATCH_METHOD) ||
(ACPI_GPE_DISPATCH_TYPE(handler->original_flags) ==
ACPI_GPE_DISPATCH_NOTIFY)) && handler->originally_enabled) {
(void)acpi_ev_add_gpe_reference(gpe_event_info);
(void)acpi_ev_add_gpe_reference(gpe_event_info, FALSE);
if (ACPI_GPE_IS_POLLING_NEEDED(gpe_event_info)) {
/* Poll edge triggered GPEs to handle existing events */
+1 -1
View File
@@ -108,7 +108,7 @@ acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number)
if (gpe_event_info) {
if (ACPI_GPE_DISPATCH_TYPE(gpe_event_info->flags) !=
ACPI_GPE_DISPATCH_NONE) {
status = acpi_ev_add_gpe_reference(gpe_event_info);
status = acpi_ev_add_gpe_reference(gpe_event_info, TRUE);
if (ACPI_SUCCESS(status) &&
ACPI_GPE_IS_POLLING_NEEDED(gpe_event_info)) {
+93 -62
View File
@@ -2059,10 +2059,9 @@ static size_t binder_get_object(struct binder_proc *proc,
read_size = min_t(size_t, sizeof(*object), buffer->data_size - offset);
if (offset > buffer->data_size || read_size < sizeof(*hdr) ||
!IS_ALIGNED(offset, sizeof(u32)))
binder_alloc_copy_from_buffer(&proc->alloc, object, buffer,
offset, read_size))
return 0;
binder_alloc_copy_from_buffer(&proc->alloc, object, buffer,
offset, read_size);
/* Ok, now see if we read a complete object. */
hdr = &object->hdr;
@@ -2131,8 +2130,10 @@ static struct binder_buffer_object *binder_validate_ptr(
return NULL;
buffer_offset = start_offset + sizeof(binder_size_t) * index;
binder_alloc_copy_from_buffer(&proc->alloc, &object_offset,
b, buffer_offset, sizeof(object_offset));
if (binder_alloc_copy_from_buffer(&proc->alloc, &object_offset,
b, buffer_offset,
sizeof(object_offset)))
return NULL;
object_size = binder_get_object(proc, b, object_offset, object);
if (!object_size || object->hdr.type != BINDER_TYPE_PTR)
return NULL;
@@ -2212,10 +2213,12 @@ static bool binder_validate_fixup(struct binder_proc *proc,
return false;
last_min_offset = last_bbo->parent_offset + sizeof(uintptr_t);
buffer_offset = objects_start_offset +
sizeof(binder_size_t) * last_bbo->parent,
binder_alloc_copy_from_buffer(&proc->alloc, &last_obj_offset,
b, buffer_offset,
sizeof(last_obj_offset));
sizeof(binder_size_t) * last_bbo->parent;
if (binder_alloc_copy_from_buffer(&proc->alloc,
&last_obj_offset,
b, buffer_offset,
sizeof(last_obj_offset)))
return false;
}
return (fixup_offset >= last_min_offset);
}
@@ -2301,15 +2304,15 @@ static void binder_transaction_buffer_release(struct binder_proc *proc,
for (buffer_offset = off_start_offset; buffer_offset < off_end_offset;
buffer_offset += sizeof(binder_size_t)) {
struct binder_object_header *hdr;
size_t object_size;
size_t object_size = 0;
struct binder_object object;
binder_size_t object_offset;
binder_alloc_copy_from_buffer(&proc->alloc, &object_offset,
buffer, buffer_offset,
sizeof(object_offset));
object_size = binder_get_object(proc, buffer,
object_offset, &object);
if (!binder_alloc_copy_from_buffer(&proc->alloc, &object_offset,
buffer, buffer_offset,
sizeof(object_offset)))
object_size = binder_get_object(proc, buffer,
object_offset, &object);
if (object_size == 0) {
pr_err("transaction release %d bad object at offset %lld, size %zd\n",
debug_id, (u64)object_offset, buffer->data_size);
@@ -2432,15 +2435,16 @@ static void binder_transaction_buffer_release(struct binder_proc *proc,
for (fd_index = 0; fd_index < fda->num_fds;
fd_index++) {
u32 fd;
int err;
binder_size_t offset = fda_offset +
fd_index * sizeof(fd);
binder_alloc_copy_from_buffer(&proc->alloc,
&fd,
buffer,
offset,
sizeof(fd));
binder_deferred_fd_close(fd);
err = binder_alloc_copy_from_buffer(
&proc->alloc, &fd, buffer,
offset, sizeof(fd));
WARN_ON(err);
if (!err)
binder_deferred_fd_close(fd);
}
} break;
default:
@@ -2683,11 +2687,12 @@ static int binder_translate_fd_array(struct binder_fd_array_object *fda,
int ret;
binder_size_t offset = fda_offset + fdi * sizeof(fd);
binder_alloc_copy_from_buffer(&target_proc->alloc,
&fd, t->buffer,
offset, sizeof(fd));
ret = binder_translate_fd(fd, offset, t, thread,
in_reply_to);
ret = binder_alloc_copy_from_buffer(&target_proc->alloc,
&fd, t->buffer,
offset, sizeof(fd));
if (!ret)
ret = binder_translate_fd(fd, offset, t, thread,
in_reply_to);
if (ret < 0)
return ret;
}
@@ -2740,8 +2745,12 @@ static int binder_fixup_parent(struct binder_transaction *t,
}
buffer_offset = bp->parent_offset +
(uintptr_t)parent->buffer - (uintptr_t)b->user_data;
binder_alloc_copy_to_buffer(&target_proc->alloc, b, buffer_offset,
&bp->buffer, sizeof(bp->buffer));
if (binder_alloc_copy_to_buffer(&target_proc->alloc, b, buffer_offset,
&bp->buffer, sizeof(bp->buffer))) {
binder_user_error("%d:%d got transaction with invalid parent offset\n",
proc->pid, thread->pid);
return -EINVAL;
}
return 0;
}
@@ -3160,15 +3169,20 @@ static void binder_transaction(struct binder_proc *proc,
goto err_binder_alloc_buf_failed;
}
if (secctx) {
int err;
size_t buf_offset = ALIGN(tr->data_size, sizeof(void *)) +
ALIGN(tr->offsets_size, sizeof(void *)) +
ALIGN(extra_buffers_size, sizeof(void *)) -
ALIGN(secctx_sz, sizeof(u64));
t->security_ctx = (uintptr_t)t->buffer->user_data + buf_offset;
binder_alloc_copy_to_buffer(&target_proc->alloc,
t->buffer, buf_offset,
secctx, secctx_sz);
err = binder_alloc_copy_to_buffer(&target_proc->alloc,
t->buffer, buf_offset,
secctx, secctx_sz);
if (err) {
t->security_ctx = 0;
WARN_ON(1);
}
security_release_secctx(secctx, secctx_sz);
secctx = NULL;
}
@@ -3234,11 +3248,16 @@ static void binder_transaction(struct binder_proc *proc,
struct binder_object object;
binder_size_t object_offset;
binder_alloc_copy_from_buffer(&target_proc->alloc,
&object_offset,
t->buffer,
buffer_offset,
sizeof(object_offset));
if (binder_alloc_copy_from_buffer(&target_proc->alloc,
&object_offset,
t->buffer,
buffer_offset,
sizeof(object_offset))) {
return_error = BR_FAILED_REPLY;
return_error_param = -EINVAL;
return_error_line = __LINE__;
goto err_bad_offset;
}
object_size = binder_get_object(target_proc, t->buffer,
object_offset, &object);
if (object_size == 0 || object_offset < off_min) {
@@ -3262,15 +3281,17 @@ static void binder_transaction(struct binder_proc *proc,
fp = to_flat_binder_object(hdr);
ret = binder_translate_binder(fp, t, thread);
if (ret < 0) {
if (ret < 0 ||
binder_alloc_copy_to_buffer(&target_proc->alloc,
t->buffer,
object_offset,
fp, sizeof(*fp))) {
return_error = BR_FAILED_REPLY;
return_error_param = ret;
return_error_line = __LINE__;
goto err_translate_failed;
}
binder_alloc_copy_to_buffer(&target_proc->alloc,
t->buffer, object_offset,
fp, sizeof(*fp));
} break;
case BINDER_TYPE_HANDLE:
case BINDER_TYPE_WEAK_HANDLE: {
@@ -3278,15 +3299,16 @@ static void binder_transaction(struct binder_proc *proc,
fp = to_flat_binder_object(hdr);
ret = binder_translate_handle(fp, t, thread);
if (ret < 0) {
if (ret < 0 ||
binder_alloc_copy_to_buffer(&target_proc->alloc,
t->buffer,
object_offset,
fp, sizeof(*fp))) {
return_error = BR_FAILED_REPLY;
return_error_param = ret;
return_error_line = __LINE__;
goto err_translate_failed;
}
binder_alloc_copy_to_buffer(&target_proc->alloc,
t->buffer, object_offset,
fp, sizeof(*fp));
} break;
case BINDER_TYPE_FD: {
@@ -3296,16 +3318,17 @@ static void binder_transaction(struct binder_proc *proc,
int ret = binder_translate_fd(fp->fd, fd_offset, t,
thread, in_reply_to);
if (ret < 0) {
fp->pad_binder = 0;
if (ret < 0 ||
binder_alloc_copy_to_buffer(&target_proc->alloc,
t->buffer,
object_offset,
fp, sizeof(*fp))) {
return_error = BR_FAILED_REPLY;
return_error_param = ret;
return_error_line = __LINE__;
goto err_translate_failed;
}
fp->pad_binder = 0;
binder_alloc_copy_to_buffer(&target_proc->alloc,
t->buffer, object_offset,
fp, sizeof(*fp));
} break;
case BINDER_TYPE_FDA: {
struct binder_object ptr_object;
@@ -3393,15 +3416,16 @@ static void binder_transaction(struct binder_proc *proc,
num_valid,
last_fixup_obj_off,
last_fixup_min_off);
if (ret < 0) {
if (ret < 0 ||
binder_alloc_copy_to_buffer(&target_proc->alloc,
t->buffer,
object_offset,
bp, sizeof(*bp))) {
return_error = BR_FAILED_REPLY;
return_error_param = ret;
return_error_line = __LINE__;
goto err_translate_failed;
}
binder_alloc_copy_to_buffer(&target_proc->alloc,
t->buffer, object_offset,
bp, sizeof(*bp));
last_fixup_obj_off = object_offset;
last_fixup_min_off = 0;
} break;
@@ -4140,20 +4164,27 @@ static int binder_apply_fd_fixups(struct binder_proc *proc,
trace_binder_transaction_fd_recv(t, fd, fixup->offset);
fd_install(fd, fixup->file);
fixup->file = NULL;
binder_alloc_copy_to_buffer(&proc->alloc, t->buffer,
fixup->offset, &fd,
sizeof(u32));
if (binder_alloc_copy_to_buffer(&proc->alloc, t->buffer,
fixup->offset, &fd,
sizeof(u32))) {
ret = -EINVAL;
break;
}
}
list_for_each_entry_safe(fixup, tmp, &t->fd_fixups, fixup_entry) {
if (fixup->file) {
fput(fixup->file);
} else if (ret) {
u32 fd;
int err;
binder_alloc_copy_from_buffer(&proc->alloc, &fd,
t->buffer, fixup->offset,
sizeof(fd));
binder_deferred_fd_close(fd);
err = binder_alloc_copy_from_buffer(&proc->alloc, &fd,
t->buffer,
fixup->offset,
sizeof(fd));
WARN_ON(err);
if (!err)
binder_deferred_fd_close(fd);
}
list_del(&fixup->fixup_entry);
kfree(fixup);
@@ -4268,6 +4299,8 @@ retry:
case BINDER_WORK_TRANSACTION_COMPLETE: {
binder_inner_proc_unlock(proc);
cmd = BR_TRANSACTION_COMPLETE;
kfree(w);
binder_stats_deleted(BINDER_STAT_TRANSACTION_COMPLETE);
if (put_user(cmd, (uint32_t __user *)ptr))
return -EFAULT;
ptr += sizeof(uint32_t);
@@ -4276,8 +4309,6 @@ retry:
binder_debug(BINDER_DEBUG_TRANSACTION_COMPLETE,
"%d:%d BR_TRANSACTION_COMPLETE\n",
proc->pid, thread->pid);
kfree(w);
binder_stats_deleted(BINDER_STAT_TRANSACTION_COMPLETE);
} break;
case BINDER_WORK_NODE: {
struct binder_node *node = container_of(w, struct binder_node, work);
+23 -21
View File
@@ -1119,15 +1119,16 @@ binder_alloc_copy_user_to_buffer(struct binder_alloc *alloc,
return 0;
}
static void binder_alloc_do_buffer_copy(struct binder_alloc *alloc,
bool to_buffer,
struct binder_buffer *buffer,
binder_size_t buffer_offset,
void *ptr,
size_t bytes)
static int binder_alloc_do_buffer_copy(struct binder_alloc *alloc,
bool to_buffer,
struct binder_buffer *buffer,
binder_size_t buffer_offset,
void *ptr,
size_t bytes)
{
/* All copies must be 32-bit aligned and 32-bit size */
BUG_ON(!check_buffer(alloc, buffer, buffer_offset, bytes));
if (!check_buffer(alloc, buffer, buffer_offset, bytes))
return -EINVAL;
while (bytes) {
unsigned long size;
@@ -1155,25 +1156,26 @@ static void binder_alloc_do_buffer_copy(struct binder_alloc *alloc,
ptr = ptr + size;
buffer_offset += size;
}
return 0;
}
void binder_alloc_copy_to_buffer(struct binder_alloc *alloc,
struct binder_buffer *buffer,
binder_size_t buffer_offset,
void *src,
size_t bytes)
int binder_alloc_copy_to_buffer(struct binder_alloc *alloc,
struct binder_buffer *buffer,
binder_size_t buffer_offset,
void *src,
size_t bytes)
{
binder_alloc_do_buffer_copy(alloc, true, buffer, buffer_offset,
src, bytes);
return binder_alloc_do_buffer_copy(alloc, true, buffer, buffer_offset,
src, bytes);
}
void binder_alloc_copy_from_buffer(struct binder_alloc *alloc,
void *dest,
struct binder_buffer *buffer,
binder_size_t buffer_offset,
size_t bytes)
int binder_alloc_copy_from_buffer(struct binder_alloc *alloc,
void *dest,
struct binder_buffer *buffer,
binder_size_t buffer_offset,
size_t bytes)
{
binder_alloc_do_buffer_copy(alloc, false, buffer, buffer_offset,
dest, bytes);
return binder_alloc_do_buffer_copy(alloc, false, buffer, buffer_offset,
dest, bytes);
}
+10 -10
View File
@@ -159,17 +159,17 @@ binder_alloc_copy_user_to_buffer(struct binder_alloc *alloc,
const void __user *from,
size_t bytes);
void binder_alloc_copy_to_buffer(struct binder_alloc *alloc,
struct binder_buffer *buffer,
binder_size_t buffer_offset,
void *src,
size_t bytes);
int binder_alloc_copy_to_buffer(struct binder_alloc *alloc,
struct binder_buffer *buffer,
binder_size_t buffer_offset,
void *src,
size_t bytes);
void binder_alloc_copy_from_buffer(struct binder_alloc *alloc,
void *dest,
struct binder_buffer *buffer,
binder_size_t buffer_offset,
size_t bytes);
int binder_alloc_copy_from_buffer(struct binder_alloc *alloc,
void *dest,
struct binder_buffer *buffer,
binder_size_t buffer_offset,
size_t bytes);
#endif /* _LINUX_BINDER_ALLOC_H */
+5 -3
View File
@@ -1469,7 +1469,7 @@ static int ata_eh_read_log_10h(struct ata_device *dev,
tf->hob_lbah = buf[10];
tf->nsect = buf[12];
tf->hob_nsect = buf[13];
if (ata_id_has_ncq_autosense(dev->id))
if (dev->class == ATA_DEV_ZAC && ata_id_has_ncq_autosense(dev->id))
tf->auxiliary = buf[14] << 16 | buf[15] << 8 | buf[16];
return 0;
@@ -1716,7 +1716,8 @@ void ata_eh_analyze_ncq_error(struct ata_link *link)
memcpy(&qc->result_tf, &tf, sizeof(tf));
qc->result_tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
qc->err_mask |= AC_ERR_DEV | AC_ERR_NCQ;
if ((qc->result_tf.command & ATA_SENSE) || qc->result_tf.auxiliary) {
if (dev->class == ATA_DEV_ZAC &&
((qc->result_tf.command & ATA_SENSE) || qc->result_tf.auxiliary)) {
char sense_key, asc, ascq;
sense_key = (qc->result_tf.auxiliary >> 16) & 0xff;
@@ -1770,10 +1771,11 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc,
}
switch (qc->dev->class) {
case ATA_DEV_ATA:
case ATA_DEV_ZAC:
if (stat & ATA_SENSE)
ata_eh_request_sense(qc, qc->scsicmd);
/* fall through */
case ATA_DEV_ATA:
if (err & ATA_ICRC)
qc->err_mask |= AC_ERR_ATA_BUS;
if (err & (ATA_UNC | ATA_AMNF))
+2 -1
View File
@@ -655,7 +655,8 @@ static int cacheinfo_cpu_pre_down(unsigned int cpu)
static int __init cacheinfo_sysfs_init(void)
{
return cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "base/cacheinfo:online",
return cpuhp_setup_state(CPUHP_AP_BASE_CACHEINFO_ONLINE,
"base/cacheinfo:online",
cacheinfo_cpu_online, cacheinfo_cpu_pre_down);
}
device_initcall(cacheinfo_sysfs_init);
+1 -1
View File
@@ -659,7 +659,7 @@ static bool fw_run_sysfs_fallback(enum fw_opt opt_flags)
/* Also permit LSMs and IMA to fail firmware sysfs fallback */
ret = security_kernel_load_data(LOADING_FIRMWARE);
if (ret < 0)
return ret;
return false;
return fw_force_sysfs_fallback(opt_flags);
}
+2
View File
@@ -579,6 +579,8 @@ void regmap_debugfs_init(struct regmap *map, const char *name)
}
if (!strcmp(name, "dummy")) {
kfree(map->debugfs_name);
map->debugfs_name = kasprintf(GFP_KERNEL, "dummy%d",
dummy_index);
name = map->debugfs_name;
+2
View File
@@ -1637,6 +1637,8 @@ static int _regmap_raw_write_impl(struct regmap *map, unsigned int reg,
map->format.reg_bytes +
map->format.pad_bytes,
val, val_len);
else
ret = -ENOTSUPP;
/* If that didn't work fall back on linearising by hand. */
if (ret == -ENOTSUPP) {

Some files were not shown because too many files have changed in this diff Show More