Compare commits

...

105 Commits

Author SHA1 Message Date
Greg Kroah-Hartman e609d3fc31 Linux 3.18.2 2015-01-08 10:30:41 -08:00
Filipe Manana 3c6babf55d Btrfs: fix fs corruption on transaction abort if device supports discard
commit 678886bdc6 upstream.

When we abort a transaction we iterate over all the ranges marked as dirty
in fs_info->freed_extents[0] and fs_info->freed_extents[1], clear them
from those trees, add them back (unpin) to the free space caches and, if
the fs was mounted with "-o discard", perform a discard on those regions.
Also, after adding the regions to the free space caches, a fitrim ioctl call
can see those ranges in a block group's free space cache and perform a discard
on the ranges, so the same issue can happen without "-o discard" as well.

This causes corruption, affecting one or multiple btree nodes (in the worst
case leaving the fs unmountable) because some of those ranges (the ones in
the fs_info->pinned_extents tree) correspond to btree nodes/leafs that are
referred by the last committed super block - breaking the rule that anything
that was committed by a transaction is untouched until the next transaction
commits successfully.

I ran into this while running in a loop (for several hours) the fstest that
I recently submitted:

  [PATCH] fstests: add btrfs test to stress chunk allocation/removal and fstrim

The corruption always happened when a transaction aborted and then fsck complained
like this:

   _check_btrfs_filesystem: filesystem on /dev/sdc is inconsistent
   *** fsck.btrfs output ***
   Check tree block failed, want=94945280, have=0
   Check tree block failed, want=94945280, have=0
   Check tree block failed, want=94945280, have=0
   Check tree block failed, want=94945280, have=0
   Check tree block failed, want=94945280, have=0
   read block failed check_tree_block
   Couldn't open file system

In this case 94945280 corresponded to the root of a tree.
Using frace what I observed was the following sequence of steps happened:

   1) transaction N started, fs_info->pinned_extents pointed to
      fs_info->freed_extents[0];

   2) node/eb 94945280 is created;

   3) eb is persisted to disk;

   4) transaction N commit starts, fs_info->pinned_extents now points to
      fs_info->freed_extents[1], and transaction N completes;

   5) transaction N + 1 starts;

   6) eb is COWed, and btrfs_free_tree_block() called for this eb;

   7) eb range (94945280 to 94945280 + 16Kb) is added to
      fs_info->pinned_extents (fs_info->freed_extents[1]);

   8) Something goes wrong in transaction N + 1, like hitting ENOSPC
      for example, and the transaction is aborted, turning the fs into
      readonly mode. The stack trace I got for example:

      [112065.253935]  [<ffffffff8140c7b6>] dump_stack+0x4d/0x66
      [112065.254271]  [<ffffffff81042984>] warn_slowpath_common+0x7f/0x98
      [112065.254567]  [<ffffffffa0325990>] ? __btrfs_abort_transaction+0x50/0x10b [btrfs]
      [112065.261674]  [<ffffffff810429e5>] warn_slowpath_fmt+0x48/0x50
      [112065.261922]  [<ffffffffa032949e>] ? btrfs_free_path+0x26/0x29 [btrfs]
      [112065.262211]  [<ffffffffa0325990>] __btrfs_abort_transaction+0x50/0x10b [btrfs]
      [112065.262545]  [<ffffffffa036b1d6>] btrfs_remove_chunk+0x537/0x58b [btrfs]
      [112065.262771]  [<ffffffffa033840f>] btrfs_delete_unused_bgs+0x1de/0x21b [btrfs]
      [112065.263105]  [<ffffffffa0343106>] cleaner_kthread+0x100/0x12f [btrfs]
      (...)
      [112065.264493] ---[ end trace dd7903a975a31a08 ]---
      [112065.264673] BTRFS: error (device sdc) in btrfs_remove_chunk:2625: errno=-28 No space left
      [112065.264997] BTRFS info (device sdc): forced readonly

   9) The clear kthread sees that the BTRFS_FS_STATE_ERROR bit is set in
      fs_info->fs_state and calls btrfs_cleanup_transaction(), which in
      turn calls btrfs_destroy_pinned_extent();

   10) Then btrfs_destroy_pinned_extent() iterates over all the ranges
       marked as dirty in fs_info->freed_extents[], and for each one
       it calls discard, if the fs was mounted with "-o discard", and
       adds the range to the free space cache of the respective block
       group;

   11) btrfs_trim_block_group(), invoked from the fitrim ioctl code path,
       sees the free space entries and performs a discard;

   12) After an umount and mount (or fsck), our eb's location on disk was full
       of zeroes, and it should have been untouched, because it was marked as
       dirty in the fs_info->pinned_extents tree, and therefore used by the
       trees that the last committed superblock points to.

Fix this by not performing a discard and not adding the ranges to the free space
caches - it's useless from this point since the fs is now in readonly mode and
we won't write free space caches to disk anymore (otherwise we would leak space)
nor any new superblock. By not adding the ranges to the free space caches, it
prevents other code paths from allocating that space and write to it as well,
therefore being safer and simpler.

This isn't a new problem, as it's been present since 2011 (git commit
acce952b02).

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:30 -08:00
Josef Bacik 9d15399d7a Btrfs: make sure logged extents complete in the current transaction V3
commit 50d9aa99bd upstream.

Liu Bo pointed out that my previous fix would lose the generation update in the
scenario I described.  It is actually much worse than that, we could lose the
entire extent if we lose power right after the transaction commits.  Consider
the following

write extent 0-4k
log extent in log tree
commit transaction
	< power fail happens here
ordered extent completes

We would lose the 0-4k extent because it hasn't updated the actual fs tree, and
the transaction commit will reset the log so it isn't replayed.  If we lose
power before the transaction commit we are save, otherwise we are not.

Fix this by keeping track of all extents we logged in this transaction.  Then
when we go to commit the transaction make sure we wait for all of those ordered
extents to complete before proceeding.  This will make sure that if we lose
power after the transaction commit we still have our data.  This also fixes the
problem of the improperly updated extent generation.  Thanks,

Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:30 -08:00
Josef Bacik 115f9146f7 Btrfs: do not move em to modified list when unpinning
commit a28046956c upstream.

We use the modified list to keep track of which extents have been modified so we
know which ones are candidates for logging at fsync() time.  Newly modified
extents are added to the list at modification time, around the same time the
ordered extent is created.  We do this so that we don't have to wait for ordered
extents to complete before we know what we need to log.  The problem is when
something like this happens

log extent 0-4k on inode 1
copy csum for 0-4k from ordered extent into log
sync log
commit transaction
log some other extent on inode 1
ordered extent for 0-4k completes and adds itself onto modified list again
log changed extents
see ordered extent for 0-4k has already been logged
	at this point we assume the csum has been copied
sync log
crash

On replay we will see the extent 0-4k in the log, drop the original 0-4k extent
which is the same one that we are replaying which also drops the csum, and then
we won't find the csum in the log for that bytenr.  This of course causes us to
have errors about not having csums for certain ranges of our inode.  So remove
the modified list manipulation in unpin_extent_cache, any modified extents
should have been added well before now, and we don't want them re-logged.  This
fixes my test that I could reliably reproduce this problem with.  Thanks,

Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:30 -08:00
David Sterba 37ea7a1f6b btrfs: fix wrong accounting of raid1 data profile in statfs
commit 0d95c1bec9 upstream.

The sizes that are obtained from space infos are in raw units and have
to be adjusted according to the raid factor. This was missing for
f_bavail and df reported doubled size for raid1.

Reported-by: Martin Steigerwald <Martin@lichtvoll.de>
Fixes: ba7b6e62f4 ("btrfs: adjust statfs calculations according to raid profiles")
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:30 -08:00
Josef Bacik d77fe802ae Btrfs: make sure we wait on logged extents when fsycning two subvols
commit 9dba8cf128 upstream.

If we have two fsync()'s race on different subvols one will do all of its work
to get into the log_tree, wait on it's outstanding IO, and then allow the
log_tree to finish it's commit.  The problem is we were just free'ing that
subvols logged extents instead of waiting on them, so whoever lost the race
wouldn't really have their data on disk.  Fix this by waiting properly instead
of freeing the logged extents.  Thanks,

Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:29 -08:00
Michael Halcrow d7fad547c3 eCryptfs: Remove buggy and unnecessary write in file name decode routine
commit 942080643b upstream.

Dmitry Chernenkov used KASAN to discover that eCryptfs writes past the
end of the allocated buffer during encrypted filename decoding. This
fix corrects the issue by getting rid of the unnecessary 0 write when
the current bit offset is 2.

Signed-off-by: Michael Halcrow <mhalcrow@google.com>
Reported-by: Dmitry Chernenkov <dmitryc@google.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:29 -08:00
Tyler Hicks bbeb37ea15 eCryptfs: Force RO mount when encrypted view is enabled
commit 332b122d39 upstream.

The ecryptfs_encrypted_view mount option greatly changes the
functionality of an eCryptfs mount. Instead of encrypting and decrypting
lower files, it provides a unified view of the encrypted files in the
lower filesystem. The presence of the ecryptfs_encrypted_view mount
option is intended to force a read-only mount and modifying files is not
supported when the feature is in use. See the following commit for more
information:

  e77a56d [PATCH] eCryptfs: Encrypted passthrough

This patch forces the mount to be read-only when the
ecryptfs_encrypted_view mount option is specified by setting the
MS_RDONLY flag on the superblock. Additionally, this patch removes some
broken logic in ecryptfs_open() that attempted to prevent modifications
of files when the encrypted view feature was in use. The check in
ecryptfs_open() was not sufficient to prevent file modifications using
system calls that do not operate on a file descriptor.

Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reported-by: Priya Bansal <p.bansal@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:29 -08:00
Jan Kara 41ba2abbb3 udf: Check component length before reading it
commit e237ec37ec upstream.

Check that length specified in a component of a symlink fits in the
input buffer we are reading. Also properly ignore component length for
component types that do not use it. Otherwise we read memory after end
of buffer for corrupted udf image.

Reported-by: Carl Henrik Lunde <chlunde@ping.uio.no>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:29 -08:00
Jan Kara 53fbe4cb77 udf: Verify symlink size before loading it
commit a1d47b2629 upstream.

UDF specification allows arbitrarily large symlinks. However we support
only symlinks at most one block large. Check the length of the symlink
so that we don't access memory beyond end of the symlink block.

Reported-by: Carl Henrik Lunde <chlunde@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:29 -08:00
Jan Kara a6a4afa5c4 udf: Verify i_size when loading inode
commit e159332b9a upstream.

Verify that inode size is sane when loading inode with data stored in
ICB. Otherwise we may get confused later when working with the inode and
inode size is too big.

Reported-by: Carl Henrik Lunde <chlunde@ping.uio.no>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:28 -08:00
Jan Kara 1a927faa55 udf: Check path length when reading symlink
commit 0e5cc9a40a upstream.

Symlink reading code does not check whether the resulting path fits into
the page provided by the generic code. This isn't as easy as just
checking the symlink size because of various encoding conversions we
perform on path. So we have to check whether there is still enough space
in the buffer on the fly.

Reported-by: Carl Henrik Lunde <chlunde@ping.uio.no>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:28 -08:00
Oleg Nesterov 9cc010cac4 exit: pidns: alloc_pid() leaks pid_namespace if child_reaper is exiting
commit 24c037ebf5 upstream.

alloc_pid() does get_pid_ns() beforehand but forgets to put_pid_ns() if it
fails because disable_pid_allocation() was called by the exiting
child_reaper.

We could simply move get_pid_ns() down to successful return, but this fix
tries to be as trivial as possible.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Serge Hallyn <serge.hallyn@ubuntu.com>
Cc: Sterling Alexander <stalexan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:28 -08:00
Joonsoo Kim 2f4f9b92b2 mm/CMA: fix boot regression due to physical address of high_memory
commit 6b101e2a3c upstream.

high_memory isn't direct mapped memory so retrieving it's physical address
isn't appropriate.  But, it would be useful to check physical address of
highmem boundary so it's justfiable to get physical address from it.  In
x86, there is a validation check if CONFIG_DEBUG_VIRTUAL and it triggers
following boot failure reported by Ingo.

  ...
  BUG: Int 6: CR2 00f06f53
  ...
  Call Trace:
    dump_stack+0x41/0x52
    early_idt_handler+0x6b/0x6b
    cma_declare_contiguous+0x33/0x212
    dma_contiguous_reserve_area+0x31/0x4e
    dma_contiguous_reserve+0x11d/0x125
    setup_arch+0x7b5/0xb63
    start_kernel+0xb8/0x3e6
    i386_start_kernel+0x79/0x7d

To fix boot regression, this patch implements workaround to avoid
validation check in x86 when retrieving physical address of high_memory.
__pa_nodebug() used by this patch is implemented only in x86 so there is
no choice but to use dirty #ifdef.

[akpm@linux-foundation.org: tweak comment]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reported-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:28 -08:00
Jan Kara 522a8162a0 ncpfs: return proper error from NCP_IOC_SETROOT ioctl
commit a682e9c28c upstream.

If some error happens in NCP_IOC_SETROOT ioctl, the appropriate error
return value is then (in most cases) just overwritten before we return.
This can result in reporting success to userspace although error happened.

This bug was introduced by commit 2e54eb96e2 ("BKL: Remove BKL from
ncpfs").  Propagate the errors correctly.

Coverity id: 1226925.

Fixes: 2e54eb96e2 ("BKL: Remove BKL from ncpfs")
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Petr Vandrovec <petr@vandrovec.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:28 -08:00
Rabin Vincent fa06c84a8c crypto: af_alg - fix backlog handling
commit 7e77bdebff upstream.

If a request is backlogged, it's complete() handler will get called
twice: once with -EINPROGRESS, and once with the final error code.

af_alg's complete handler, unlike other users, does not handle the
-EINPROGRESS but instead always completes the completion that recvmsg()
is waiting on.  This can lead to a return to user space while the
request is still pending in the driver.  If userspace closes the sockets
before the requests are handled by the driver, this will lead to
use-after-frees (and potential crashes) in the kernel due to the tfm
having been freed.

The crashes can be easily reproduced (for example) by reducing the max
queue length in cryptod.c and running the following (from
http://www.chronox.de/libkcapi.html) on AES-NI capable hardware:

 $ while true; do kcapi -x 1 -e -c '__ecb-aes-aesni' \
    -k 00000000000000000000000000000000 \
    -p 00000000000000000000000000000000 >/dev/null & done

Signed-off-by: Rabin Vincent <rabin.vincent@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:27 -08:00
Richard Guy Briggs 3d7c0c1f60 audit: restore AUDIT_LOGINUID unset ABI
commit 041d7b98ff upstream.

A regression was caused by commit 780a7654ce:
	 audit: Make testing for a valid loginuid explicit.
(which in turn attempted to fix a regression caused by e1760bd)

When audit_krule_to_data() fills in the rules to get a listing, there was a
missing clause to convert back from AUDIT_LOGINUID_SET to AUDIT_LOGINUID.

This broke userspace by not returning the same information that was sent and
expected.

The rule:
	auditctl -a exit,never -F auid=-1
gives:
	auditctl -l
		LIST_RULES: exit,never f24=0 syscall=all
when it should give:
		LIST_RULES: exit,never auid=-1 (0xffffffff) syscall=all

Tag it so that it is reported the same way it was set.  Create a new
private flags audit_krule field (pflags) to store it that won't interact with
the public one from the API.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:27 -08:00
Paul Moore dbe0ca090f audit: don't attempt to lookup PIDs when changing PID filtering audit rules
commit 3640dcfa4f upstream.

Commit f1dc4867 ("audit: anchor all pid references in the initial pid
namespace") introduced a find_vpid() call when adding/removing audit
rules with PID/PPID filters; unfortunately this is problematic as
find_vpid() only works if there is a task with the associated PID
alive on the system.  The following commands demonstrate a simple
reproducer.

	# auditctl -D
	# auditctl -l
	# autrace /bin/true
	# auditctl -l

This patch resolves the problem by simply using the PID provided by
the user without any additional validation, e.g. no calls to check to
see if the task/PID exists.

Cc: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:27 -08:00
Richard Guy Briggs 1110f3504d audit: use supplied gfp_mask from audit_buffer in kauditd_send_multicast_skb
commit 54dc77d974 upstream.

Eric Paris explains: Since kauditd_send_multicast_skb() gets called in
audit_log_end(), which can come from any context (aka even a sleeping context)
GFP_KERNEL can't be used.  Since the audit_buffer knows what context it should
use, pass that down and use that.

See: https://lkml.org/lkml/2014/12/16/542

BUG: sleeping function called from invalid context at mm/slab.c:2849
in_atomic(): 1, irqs_disabled(): 0, pid: 885, name: sulogin
2 locks held by sulogin/885:
  #0:  (&sig->cred_guard_mutex){+.+.+.}, at: [<ffffffff91152e30>] prepare_bprm_creds+0x28/0x8b
  #1:  (tty_files_lock){+.+.+.}, at: [<ffffffff9123e787>] selinux_bprm_committing_creds+0x55/0x22b
CPU: 1 PID: 885 Comm: sulogin Not tainted 3.18.0-next-20141216 #30
Hardware name: Dell Inc. Latitude E6530/07Y85M, BIOS A15 06/20/2014
  ffff880223744f10 ffff88022410f9b8 ffffffff916ba529 0000000000000375
  ffff880223744f10 ffff88022410f9e8 ffffffff91063185 0000000000000006
  0000000000000000 0000000000000000 0000000000000000 ffff88022410fa38
Call Trace:
  [<ffffffff916ba529>] dump_stack+0x50/0xa8
  [<ffffffff91063185>] ___might_sleep+0x1b6/0x1be
  [<ffffffff910632a6>] __might_sleep+0x119/0x128
  [<ffffffff91140720>] cache_alloc_debugcheck_before.isra.45+0x1d/0x1f
  [<ffffffff91141d81>] kmem_cache_alloc+0x43/0x1c9
  [<ffffffff914e148d>] __alloc_skb+0x42/0x1a3
  [<ffffffff914e2b62>] skb_copy+0x3e/0xa3
  [<ffffffff910c263e>] audit_log_end+0x83/0x100
  [<ffffffff9123b8d3>] ? avc_audit_pre_callback+0x103/0x103
  [<ffffffff91252a73>] common_lsm_audit+0x441/0x450
  [<ffffffff9123c163>] slow_avc_audit+0x63/0x67
  [<ffffffff9123c42c>] avc_has_perm+0xca/0xe3
  [<ffffffff9123dc2d>] inode_has_perm+0x5a/0x65
  [<ffffffff9123e7ca>] selinux_bprm_committing_creds+0x98/0x22b
  [<ffffffff91239e64>] security_bprm_committing_creds+0xe/0x10
  [<ffffffff911515e6>] install_exec_creds+0xe/0x79
  [<ffffffff911974cf>] load_elf_binary+0xe36/0x10d7
  [<ffffffff9115198e>] search_binary_handler+0x81/0x18c
  [<ffffffff91153376>] do_execveat_common.isra.31+0x4e3/0x7b7
  [<ffffffff91153669>] do_execve+0x1f/0x21
  [<ffffffff91153967>] SyS_execve+0x25/0x29
  [<ffffffff916c61a9>] stub_execve+0x69/0xa0

Reported-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Tested-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:27 -08:00
Eric W. Biederman b95660c47a userns: Unbreak the unprivileged remount tests
commit db86da7cb7 upstream.

A security fix in caused the way the unprivileged remount tests were
using user namespaces to break.  Tweak the way user namespaces are
being used so the test works again.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:27 -08:00
Eric W. Biederman 57f8552358 userns: Allow setting gid_maps without privilege when setgroups is disabled
commit 66d2f338ee upstream.

Now that setgroups can be disabled and not reenabled, setting gid_map
without privielge can now be enabled when setgroups is disabled.

This restores most of the functionality that was lost when unprivileged
setting of gid_map was removed.  Applications that use this functionality
will need to check to see if they use setgroups or init_groups, and if they
don't they can be fixed by simply disabling setgroups before writing to
gid_map.

Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:26 -08:00
Eric W. Biederman 4a7215f134 userns: Add a knob to disable setgroups on a per user namespace basis
commit 9cc46516dd upstream.

- Expose the knob to user space through a proc file /proc/<pid>/setgroups

  A value of "deny" means the setgroups system call is disabled in the
  current processes user namespace and can not be enabled in the
  future in this user namespace.

  A value of "allow" means the segtoups system call is enabled.

- Descendant user namespaces inherit the value of setgroups from
  their parents.

- A proc file is used (instead of a sysctl) as sysctls currently do
  not allow checking the permissions at open time.

- Writing to the proc file is restricted to before the gid_map
  for the user namespace is set.

  This ensures that disabling setgroups at a user namespace
  level will never remove the ability to call setgroups
  from a process that already has that ability.

  A process may opt in to the setgroups disable for itself by
  creating, entering and configuring a user namespace or by calling
  setns on an existing user namespace with setgroups disabled.
  Processes without privileges already can not call setgroups so this
  is a noop.  Prodcess with privilege become processes without
  privilege when entering a user namespace and as with any other path
  to dropping privilege they would not have the ability to call
  setgroups.  So this remains within the bounds of what is possible
  without a knob to disable setgroups permanently in a user namespace.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:26 -08:00
Eric W. Biederman 54b8ced1ef userns: Rename id_map_mutex to userns_state_mutex
commit f0d62aec93 upstream.

Generalize id_map_mutex so it can be used for more state of a user namespace.

Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:26 -08:00
Eric W. Biederman 39d3003edf userns: Only allow the creator of the userns unprivileged mappings
commit f95d7918bd upstream.

If you did not create the user namespace and are allowed
to write to uid_map or gid_map you should already have the necessary
privilege in the parent user namespace to establish any mapping
you want so this will not affect userspace in practice.

Limiting unprivileged uid mapping establishment to the creator of the
user namespace makes it easier to verify all credentials obtained with
the uid mapping can be obtained without the uid mapping without
privilege.

Limiting unprivileged gid mapping establishment (which is temporarily
absent) to the creator of the user namespace also ensures that the
combination of uid and gid can already be obtained without privilege.

This is part of the fix for CVE-2014-8989.

Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:26 -08:00
Eric W. Biederman 335f060430 userns: Check euid no fsuid when establishing an unprivileged uid mapping
commit 80dd00a237 upstream.

setresuid allows the euid to be set to any of uid, euid, suid, and
fsuid.  Therefor it is safe to allow an unprivileged user to map
their euid and use CAP_SETUID privileged with exactly that uid,
as no new credentials can be obtained.

I can not find a combination of existing system calls that allows setting
uid, euid, suid, and fsuid from the fsuid making the previous use
of fsuid for allowing unprivileged mappings a bug.

This is part of a fix for CVE-2014-8989.

Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:25 -08:00
Eric W. Biederman b9b97d5b16 userns: Don't allow unprivileged creation of gid mappings
commit be7c6dba23 upstream.

As any gid mapping will allow and must allow for backwards
compatibility dropping groups don't allow any gid mappings to be
established without CAP_SETGID in the parent user namespace.

For a small class of applications this change breaks userspace
and removes useful functionality.  This small class of applications
includes tools/testing/selftests/mount/unprivilged-remount-test.c

Most of the removed functionality will be added back with the addition
of a one way knob to disable setgroups.  Once setgroups is disabled
setting the gid_map becomes as safe as setting the uid_map.

For more common applications that set the uid_map and the gid_map
with privilege this change will have no affect.

This is part of a fix for CVE-2014-8989.

Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:25 -08:00
Eric W. Biederman d5c3ebc439 userns: Don't allow setgroups until a gid mapping has been setablished
commit 273d2c67c3 upstream.

setgroups is unique in not needing a valid mapping before it can be called,
in the case of setgroups(0, NULL) which drops all supplemental groups.

The design of the user namespace assumes that CAP_SETGID can not actually
be used until a gid mapping is established.  Therefore add a helper function
to see if the user namespace gid mapping has been established and call
that function in the setgroups permission check.

This is part of the fix for CVE-2014-8989, being able to drop groups
without privilege using user namespaces.

Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:25 -08:00
Eric W. Biederman d9a75912fc userns: Document what the invariant required for safe unprivileged mappings.
commit 0542f17bf2 upstream.

The rule is simple.  Don't allow anything that wouldn't be allowed
without unprivileged mappings.

It was previously overlooked that establishing gid mappings would
allow dropping groups and potentially gaining permission to files and
directories that had lesser permissions for a specific group than for
all other users.

This is the rule needed to fix CVE-2014-8989 and prevent any other
security issues with new_idmap_permitted.

The reason for this rule is that the unix permission model is old and
there are programs out there somewhere that take advantage of every
little corner of it.  So allowing a uid or gid mapping to be
established without privielge that would allow anything that would not
be allowed without that mapping will result in expectations from some
code somewhere being violated.  Violated expectations about the
behavior of the OS is a long way to say a security issue.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:25 -08:00
Eric W. Biederman e726c9a0a2 groups: Consolidate the setgroups permission checks
commit 7ff4d90b4c upstream.

Today there are 3 instances of setgroups and due to an oversight their
permission checking has diverged.  Add a common function so that
they may all share the same permission checking code.

This corrects the current oversight in the current permission checks
and adds a helper to avoid this in the future.

A user namespace security fix will update this new helper, shortly.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:25 -08:00
Eric W. Biederman 462c8c0b35 umount: Disallow unprivileged mount force
commit b2f5d4dc38 upstream.

Forced unmount affects not just the mount namespace but the underlying
superblock as well.  Restrict forced unmount to the global root user
for now.  Otherwise it becomes possible a user in a less privileged
mount namespace to force the shutdown of a superblock of a filesystem
in a more privileged mount namespace, allowing a DOS attack on root.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:24 -08:00
Eric W. Biederman fa0bad3f28 mnt: Update unprivileged remount test
commit 4a44a19b47 upstream.

- MNT_NODEV should be irrelevant except when reading back mount flags,
  no longer specify MNT_NODEV on remount.

- Test MNT_NODEV on devpts where it is meaningful even for unprivileged mounts.

- Add a test to verify that remount of a prexisting mount with the same flags
  is allowed and does not change those flags.

- Cleanup up the definitions of MS_REC, MS_RELATIME, MS_STRICTATIME that are used
  when the code is built in an environment without them.

- Correct the test error messages when tests fail.  There were not 5 tests
  that tested MS_RELATIME.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:24 -08:00
Eric W. Biederman 80d4d8397a mnt: Implicitly add MNT_NODEV on remount when it was implicitly added by mount
commit 3e1866410f upstream.

Now that remount is properly enforcing the rule that you can't remove
nodev at least sandstorm.io is breaking when performing a remount.

It turns out that there is an easy intuitive solution implicitly
add nodev on remount when nodev was implicitly added on mount.

Tested-by: Cedric Bosdonnat <cbosdonnat@suse.com>
Tested-by: Richard Weinberger <richard@nod.at>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:24 -08:00
Luis Henriques 16811f0192 thermal: Fix error path in thermal_init()
commit 9d367e5e7b upstream.

thermal_unregister_governors() and class_unregister() were being called in
the wrong order.

Fixes: 80a26a5c22 ("Thermal: build thermal governors into thermal_sys module")
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:24 -08:00
Eric W. Biederman 877c27dbaa mnt: Fix a memory stomp in umount
commit c297abfdf1 upstream.

While reviewing the code of umount_tree I realized that when we append
to a preexisting unmounted list we do not change pprev of the former
first item in the list.

Which means later in namespace_unlock hlist_del_init(&mnt->mnt_hash) on
the former first item of the list will stomp unmounted.first leaving
it set to some random mount point which we are likely to free soon.

This isn't likely to hit, but if it does I don't know how anyone could
track it down.

[ This happened because we don't have all the same operations for
  hlist's as we do for normal doubly-linked lists. In particular,
  list_splice() is easy on our standard doubly-linked lists, while
  hlist_splice() doesn't exist and needs both start/end entries of the
  hlist.  And commit 38129a13e6 incorrectly open-coded that missing
  hlist_splice().

  We should think about making these kinds of "mindless" conversions
  easier to get right by adding the missing hlist helpers   - Linus ]

Fixes: 38129a13e6 switch mnt_hash to hlist
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:24 -08:00
Johannes Berg 9e2a8e62a4 mac80211: free management frame keys when removing station
commit 28a9bc6812 upstream.

When writing the code to allow per-station GTKs, I neglected to
take into account the management frame keys (index 4 and 5) when
freeing the station and only added code to free the first four
data frame keys.

Fix this by iterating the array of keys over the right length.

Fixes: e31b82136d ("cfg80211/mac80211: allow per-station GTKs")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:23 -08:00
Andreas Müller 4286afc166 mac80211: fix multicast LED blinking and counter
commit d025933e29 upstream.

As multicast-frames can't be fragmented, "dot11MulticastReceivedFrameCount"
stopped being incremented after the use-after-free fix. Furthermore, the
RX-LED will be triggered by every multicast frame (which wouldn't happen
before) which wouldn't allow the LED to rest at all.

Fixes https://bugzilla.kernel.org/show_bug.cgi?id=89431 which also had the
patch.

Fixes: b8fff407a1 ("mac80211: fix use-after-free in defragmentation")
Signed-off-by: Andreas Müller <goo@stapelspeicher.org>
[rewrite commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:23 -08:00
Jes Sorensen 83a67ffcf1 mac80211: avoid using uninitialized stack data
commit 7e6225a160 upstream.

Avoid a case where we would access uninitialized stack data if the AP
advertises HT support without 40MHz channel support.

Fixes: f3000e1b43 ("mac80211: fix broken use of VHT/20Mhz with some APs")
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:23 -08:00
Felix Fietkau 0a6626aa24 mac80211: copy chandef from AP vif to VLANs
commit 2967e031d4 upstream.

Instead of keeping track of all those special cases where
VLAN interfaces have no bss_conf.chandef, just make sure
they have the same as the AP interface they belong to.

Among others, this fixes a crash getting a VLAN's channel
from userspace since a NULL channel is returned as a good
result (return value 0) for VLANs since the commit below.

Fixes: c12bc4885f ("mac80211: return the vif's chandef in ieee80211_cfg_get_channel()")
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
[rewrite commit log]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:23 -08:00
Takashi Iwai a481fd1277 KEYS: Fix stale key registration at error path
commit b26bdde5bb upstream.

When loading encrypted-keys module, if the last check of
aes_get_sizes() in init_encrypted() fails, the driver just returns an
error without unregistering its key type.  This results in the stale
entry in the list.  In addition to memory leaks, this leads to a kernel
crash when registering a new key type later.

This patch fixes the problem by swapping the calls of aes_get_sizes()
and register_key_type(), and releasing resources properly at the error
paths.

Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=908163
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:23 -08:00
Borislav Petkov f3d4175f05 x86/microcode/intel: Fish out the stashed microcode for the BSP
commit 25cdb9c868 upstream.

I'm such a moron! The simple solution of saving the BSP patch
for use on resume was too simple (and wrong!), hint:
sizeof(struct microcode_intel).

What needs to be done instead is to fish out the microcode patch
we have stashed previously and apply that on the BSP in case the
late loader hasn't been utilized.

So do that instead.

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20141208110820.GB20057@pd.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:22 -08:00
Borislav Petkov d239198442 x86, microcode: Reload microcode on resume
commit fbae4ba8c4 upstream.

Normally, we do reapply microcode on resume. However, in the cases where
that microcode comes from the early loader and the late loader hasn't
been utilized yet, there's no easy way for us to go and apply the patch
applied during boot by the early loader.

Thus, reuse the patch stashed by the early loader for the BSP.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:22 -08:00
Boris Ostrovsky 44c4db3ab0 x86, microcode: Don't initialize microcode code on paravirt
commit a18a0f6850 upstream.

Paravirtual guests are not expected to load microcode into processors
and therefore it is not necessary to initialize microcode loading
logic.

In fact, under certain circumstances initializing this logic may cause
the guest to crash. Specifically, 32-bit kernels use __pa_nodebug()
macro which does not work in Xen (the code path that leads to this macro
happens during resume when we call mc_bp_resume()->load_ucode_ap()
->check_loader_disabled_ap())

Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: http://lkml.kernel.org/r/1417469264-31470-1-git-send-email-boris.ostrovsky@oracle.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:22 -08:00
Borislav Petkov 97d0906a89 x86, microcode, intel: Drop unused parameter
commit 47768626c6 upstream.

apply_microcode_early() doesn't use mc_saved_data, kill it.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:22 -08:00
Borislav Petkov 6a76bc2d9e x86, microcode, AMD: Do not use smp_processor_id() in preemtible context
commit 2ef84b3bb9 upstream.

Hand down the cpu number instead, otherwise lockdep screams when doing

echo 1 > /sys/devices/system/cpu/microcode/reload.

BUG: using smp_processor_id() in preemptible [00000000] code: amd64-microcode/2470
caller is debug_smp_processor_id+0x12/0x20
CPU: 1 PID: 2470 Comm: amd64-microcode Not tainted 3.18.0-rc6+ #26
...

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1417428741-4501-1-git-send-email-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:22 -08:00
Jan Kara 9c0f8266e9 isofs: Fix unchecked printing of ER records
commit 4e2024624e upstream.

We didn't check length of rock ridge ER records before printing them.
Thus corrupted isofs image can cause us to access and print some memory
behind the buffer with obvious consequences.

Reported-and-tested-by: Carl Henrik Lunde <chlunde@ping.uio.no>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:21 -08:00
Andy Lutomirski 743fce2698 x86/tls: Don't validate lm in set_thread_area() after all
commit 3fb2f4237b upstream.

It turns out that there's a lurking ABI issue.  GCC, when
compiling this in a 32-bit program:

struct user_desc desc = {
	.entry_number    = idx,
	.base_addr       = base,
	.limit           = 0xfffff,
	.seg_32bit       = 1,
	.contents        = 0, /* Data, grow-up */
	.read_exec_only  = 0,
	.limit_in_pages  = 1,
	.seg_not_present = 0,
	.useable         = 0,
};

will leave .lm uninitialized.  This means that anything in the
kernel that reads user_desc.lm for 32-bit tasks is unreliable.

Revert the .lm check in set_thread_area().  The value never did
anything in the first place.

Fixes: 0e58af4e1d ("x86/tls: Disallow unusual TLS segments")
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/d7875b60e28c512f6a6fc0baf5714d58e7eaadbb.1418856405.git.luto@amacapital.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:21 -08:00
Andy Lutomirski afe83db5dd x86/asm/traps: Disable tracing and kprobes in fixup_bad_iret and sync_regs
commit 7ddc6a2199 upstream.

These functions can be executed on the int3 stack, so kprobes
are dangerous. Tracing is probably a bad idea, too.

Fixes: b645af2d59 ("x86_64, traps: Rework bad_iret")
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/50e33d26adca60816f3ba968875801652507d0c4.1416870125.git.luto@amacapital.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:21 -08:00
Uwe Kleine-König 8f8c0add0c ARM: mvebu: fix ordering in Armada 370 .dtsi
commit ab1e853721 upstream.

Commit a095b1c78a ("ARM: mvebu: sort DT nodes by address")
missed placing the system-controller in the correct order.

Fixes: a095b1c78a ("ARM: mvebu: sort DT nodes by address")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/20141114204333.GS27002@pengutronix.de
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:21 -08:00
Thomas Petazzoni 6e9c89c406 ARM: mvebu: remove conflicting muxing on Armada 370 DB
commit b4607572ef upstream.

Back when audio was enabled, the muxing of some MPP pins was causing
problems. However, since commit fea038ed55 ("ARM: mvebu: Add proper
pin muxing on the Armada 370 DB board"), those problematic MPP pins
have been assigned a proper muxing for the Ethernet interfaces. This
proper muxing is now conflicting with the hog pins muxing that had
been added as part of 249f382250 ("ARM: mvebu: add audio support to
Armada 370 DB").

Therefore, this commit simply removes the hog pins muxing, which
solves a warning a boot time due to the conflicting muxing
requirements.

Fixes: fea038ed55 ("ARM: mvebu: Add proper pin muxing on the Armada 370 DB board")
Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1414512524-24466-5-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:21 -08:00
Thomas Petazzoni a35da78ef3 ARM: mvebu: disable I/O coherency on non-SMP situations on Armada 370/375/38x/XP
commit e553554536 upstream.

Enabling the hardware I/O coherency on Armada 370, Armada 375, Armada
38x and Armada XP requires a certain number of conditions:

 - On Armada 370, the cache policy must be set to write-allocate.

 - On Armada 375, 38x and XP, the cache policy must be set to
   write-allocate, the pages must be mapped with the shareable
   attribute, and the SMP bit must be set

Currently, on Armada XP, when CONFIG_SMP is enabled, those conditions
are met. However, when Armada XP is used in a !CONFIG_SMP kernel, none
of these conditions are met. With Armada 370, the situation is worse:
since the processor is single core, regardless of whether CONFIG_SMP
or !CONFIG_SMP is used, the cache policy will be set to write-back by
the kernel and not write-allocate.

Since solving this problem turns out to be quite complicated, and we
don't want to let users with a mainline kernel known to have
infrequent but existing data corruptions, this commit proposes to
simply disable hardware I/O coherency in situations where it is known
not to work.

And basically, the is_smp() function of the kernel tells us whether it
is OK to enable hardware I/O coherency or not, so this commit slightly
refactors the coherency_type() function to return
COHERENCY_FABRIC_TYPE_NONE when is_smp() is false, or the appropriate
type of the coherency fabric in the other case.

Thanks to this, the I/O coherency fabric will no longer be used at all
in !CONFIG_SMP configurations. It will continue to be used in
CONFIG_SMP configurations on Armada XP, Armada 375 and Armada 38x
(which are multiple cores processors), but will no longer be used on
Armada 370 (which is a single core processor).

In the process, it simplifies the implementation of the
coherency_type() function, and adds a missing call to of_node_put().

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes: e60304f8cb ("arm: mvebu: Add hardware I/O Coherency support")
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Link: https://lkml.kernel.org/r/1415871540-20302-3-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:21 -08:00
Thomas Petazzoni 57aefed9b2 ARM: mvebu: make the coherency_ll.S functions work with no coherency fabric
commit 30cdef9710 upstream.

The ll_add_cpu_to_smp_group(), ll_enable_coherency() and
ll_disable_coherency() are used on Armada XP to control the coherency
fabric. However, they make the assumption that the coherency fabric is
always available, which is currently a correct assumption but will no
longer be true with a followup commit that disables the usage of the
coherency fabric when the conditions are not met to use it.

Therefore, this commit modifies those functions so that they check the
return value of ll_get_coherency_base(), and if the return value is 0,
they simply return without configuring anything in the coherency
fabric.

The ll_get_coherency_base() function is also modified to properly
return 0 when the function is called with the MMU disabled. In this
case, it normally returns the physical address of the coherency
fabric, but we now check if the virtual address is 0, and if that's
case, return a physical address of 0 to indicate that the coherency
fabric is not enabled.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Link: https://lkml.kernel.org/r/1415871540-20302-2-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:20 -08:00
Dmitry Osipenko 9658243788 ARM: tegra: Re-add removed SoC id macro to tegra_resume()
commit e4a680099a upstream.

Commit d127e9c ("ARM: tegra: make tegra_resume can work with current and later
chips") removed tegra_get_soc_id macro leaving used cpu register corrupted after
branching to v7_invalidate_l1() and as result causing execution of unintended
code on tegra20. Possibly it was expected that r6 would be SoC id func argument
since common cpu reset handler is setting r6 before branching to tegra_resume(),
but neither tegra20_lp1_reset() nor tegra30_lp1_reset() aren't setting r6
register before jumping to resume function. Fix it by re-adding macro.

Fixes: d127e9c (ARM: tegra: make tegra_resume can work with current and later chips)
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:20 -08:00
Thierry Reding 3faf430475 drm/tegra: gem: dumb: pitch and size are outputs
commit dc6057ecb3 upstream.

When creating a dumb buffer object using the DRM_IOCTL_MODE_CREATE_DUMB
IOCTL, only the width, height, bpp and flags parameters are inputs. The
caller is not guaranteed to zero out or set handle, pitch and size, so
the driver must not treat these values as possible inputs.

Fixes a bug where running the Weston compositor on Tegra DRM would cause
an attempt to allocate a 3 GiB framebuffer to be allocated.

Fixes: de2ba664c3 ("gpu: host1x: drm: Add memory manager and fb")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:20 -08:00
Zi Shen Lim f324cda693 arm64: bpf: lift restriction on last instruction
commit 51c9fbb1b1 upstream.

Earlier implementation assumed last instruction is BPF_EXIT.
Since this is no longer a restriction in eBPF, we remove this
limitation.

Per Alexei Starovoitov [1]:
> classic BPF has a restriction that last insn is always BPF_RET.
> eBPF doesn't have BPF_RET instruction and this restriction.
> It has BPF_EXIT insn which can appear anywhere in the program
> one or more times and it doesn't have to be last insn.

[1] https://lkml.org/lkml/2014/11/27/2

Fixes: e54bcde3d6 ("arm64: eBPF JIT compiler")
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: Zi Shen Lim <zlim.lnx@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:20 -08:00
Catalin Marinas 516e433a15 arm64: Add COMPAT_HWCAP_LPAE
commit 7d57511d2d upstream.

Commit a469abd0f8 (ARM: elf: add new hwcap for identifying atomic
ldrd/strd instructions) introduces HWCAP_ELF for 32-bit ARM
applications. As LPAE is always present on arm64, report the
corresponding compat HWCAP to user space.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:20 -08:00
Mikulas Patocka ffcc89dbcb dm thin: fix a race in thin_dtr
commit 17181fb7a0 upstream.

As long as struct thin_c is in the list, anyone can grab a reference of
it.  Consequently, we must wait for the reference count to drop to zero
*after* we remove the structure from the list, not before.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:19 -08:00
Joe Thornber 2409f5131d dm thin: fix missing out-of-data-space to write mode transition if blocks are released
commit 2c43fd26e4 upstream.

Discard bios and thin device deletion have the potential to release data
blocks.  If the thin-pool is in out-of-data-space mode, and blocks were
released, transition the thin-pool back to full write mode.

The correct time to do this is just after the thin-pool metadata commit.
It cannot be done before the commit because the space maps will not
allow immediate reuse of the data blocks in case there's a rollback
following power failure.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:19 -08:00
Joe Thornber 52259b6ce8 dm thin: fix inability to discard blocks when in out-of-data-space mode
commit 45ec9bd0fd upstream.

When the pool was in PM_OUT_OF_SPACE mode its process_prepared_discard
function pointer was incorrectly being set to
process_prepared_discard_passdown rather than process_prepared_discard.

This incorrect function pointer meant the discard was being passed down,
but not effecting the mapping.  As such any discard that was issued, in
an attempt to reclaim blocks, would not successfully free data space.

Reported-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:19 -08:00
Dan Carpenter 5226f8886a dm space map metadata: fix sm_bootstrap_get_nr_blocks()
commit c1c6156fe4 upstream.

This function isn't right and it causes a static checker warning:

	drivers/md/dm-thin.c:3016 maybe_resize_data_dev()
	error: potentially using uninitialized 'sb_data_size'.

It should set "*count" and return zero on success the same as the
sm_metadata_get_nr_blocks() function does earlier.

Fixes: 3241b1d3e0 ('dm: add persistent data library')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:19 -08:00
Joe Thornber 734a3fb29c dm cache: fix spurious cell_defer when dealing with partial block at end of device
commit f824a2af3d upstream.

We never bother caching a partial block that is at the back end of the
origin device.  No cell ever gets locked, but the calling code was
assuming it was and trying to release it.

Now the code only releases if the cell has been set to a non NULL
value.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:19 -08:00
Joe Thornber 7a9cdc4c90 dm cache: dirty flag was mistakenly being cleared when promoting via overwrite
commit 1e32134a5a upstream.

If the incoming bio is a WRITE and completely covers a block then we
don't bother to do any copying for a promotion operation.  Once this is
done the cache block and origin block will be different, so we need to
set it to 'dirty'.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:19 -08:00
Joe Thornber 4df99e3c89 dm cache: only use overwrite optimisation for promotion when in writeback mode
commit f29a3147e2 upstream.

Overwrite causes the cache block and origin blocks to diverge, which
is only allowed in writeback mode.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:18 -08:00
Milan Broz 6425e7b0c8 dm crypt: use memzero_explicit for on-stack buffer
commit 1a71d6ffe1 upstream.

Use memzero_explicit to cleanup sensitive data allocated on stack
to prevent the compiler from optimizing and removing memset() calls.

Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:18 -08:00
Darrick J. Wong 3c737ac94b dm bufio: fix memleak when using a dm_buffer's inline bio
commit 445559cdcb upstream.

When dm-bufio sets out to use the bio built into a struct dm_buffer to
issue an IO, it needs to call bio_reset after it's done with the bio
so that we can free things attached to the bio such as the integrity
payload.  Therefore, inject our own endio callback to take care of
the bio_reset after calling submit_io's end_io callback.

Test case:
1. modprobe scsi_debug delay=0 dif=1 dix=199 ato=1 dev_size_mb=300
2. Set up a dm-bufio client, e.g. dm-verity, on the scsi_debug device
3. Repeatedly read metadata and watch kmalloc-192 leak!

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:18 -08:00
Mikulas Patocka 6fac18d0ad dcache: fix kmemcheck warning in switch_names
commit 08d4f77222 upstream.

This patch fixes kmemcheck warning in switch_names. The function
switch_names swaps inline names of two dentries. It swaps full arrays
d_iname, no matter how many bytes are really used by the strings. Reading
data beyond string ends results in kmemcheck warning.

We fix the bug by marking both arrays as fully initialized.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:18 -08:00
Peng Tao a8897f2679 nfs41: fix nfs4_proc_layoutget error handling
commit 4bd5a980de upstream.

nfs4_layoutget_release() drops layout hdr refcnt. Grab the refcnt
early so that it is safe to call .release in case nfs4_alloc_pages
fails.

Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Fixes: a47970ff78 ("NFSv4.1: Hold reference to layout hdr in layoutget")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:18 -08:00
Jan Kara 243cc955de f2fs: fix possible data corruption in f2fs_write_begin()
commit 9234f3190b upstream.

f2fs_write_begin() doesn't initialize the 'dn' variable if the inode has
inline data. However it uses its contents to decide whether it should
just zero out the page or load data to it. Thus if we are unlucky we can
zero out page contents instead of loading inline data into a page.

CC: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:17 -08:00
Jan Kara 8744de7f08 f2fs: avoid returning uninitialized value to userspace from f2fs_trim_fs()
commit 9bd27ae4aa upstream.

If user specifies too low end sector for trimming, f2fs_trim_fs() will
use uninitialized value as a number of trimmed blocks and returns it to
userspace. Initialize number of trimmed blocks early to avoid the
problem.

Coverity-id: 1248809
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:17 -08:00
Hannes Reinecke 83b12edd3f scsi: correct return values for .eh_abort_handler implementations
commit b6c92b7e0a upstream.

The .eh_abort_handler needs to return SUCCESS, FAILED, or
FAST_IO_FAIL. So fixup all callers to adhere to this requirement.

Reviewed-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:17 -08:00
Markus Pargmann 2e36a0161b regulator: anatop: Set default voltage selector for vddpu
commit fe08be3ec8 upstream.

The code reads the default voltage selector from its register. If the
bootloader disables the regulator, the default voltage selector will be
0 which results in faulty behaviour of this regulator driver.

This patch sets a default voltage selector for vddpu if it is not set in
the register.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:17 -08:00
Sumit.Saxena@avagotech.com 9d91d6e03e megaraid_sas: dndinaness related bug fixes
commit 6e755ddc29 upstream.

This patch addresses few endianness related bug fixes.

Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com>
Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:17 -08:00
Sumit.Saxena@avagotech.com 803bb7e995 megaraid_sas: corrected return of wait_event from abort frame path
commit 170c238701 upstream.

Corrected wait_event() call which was waiting for wrong completion
status (0xFF).

Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com>
Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:17 -08:00
Peter Guo 1c45bf4396 mmc: sdhci-pci-o2micro: Fix Dell E5440 issue
commit 6380ea099c upstream.

Fix Dell E5440 when reboot Linux, can't find o2micro sd host chip issue.

Fixes: 01acf6917a (mmc: sdhci-pci: add support of O2Micro/BayHubTech SD hosts)
Signed-off-by: Peter Guo <peter.guo@bayhubtech.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:16 -08:00
Baruch Siach bc70ec2659 mmc: block: add newline to sysfs display of force_ro
commit 0031a98a85 upstream.

Make force_ro consistent with other sysfs entries.

Fixes: 371a689f64 ('mmc: MMC boot partitions support')
Cc: Andrei Warkentin <andrey.warkentin@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:16 -08:00
Ulf Hansson 8d5112b646 mmc: omap_hsmmc: Fix UHS card with DDR50 support
commit 903101a839 upstream.

The commit, mmc: omap: clarify DDR timing mode between SD-UHS and eMMC,
switched omap_hsmmc to support MMC DDR mode instead of UHS DDR50 mode.

Add UHS DDR50 mode again and this time let's also keep the MMC DDR mode.

Fixes: 5438ad95a5 (mmc: omap: clarify DDR timing mode between SD-UHS and eMMC)
Reported-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:16 -08:00
James Hogan 31b54953c5 mmc: dw_mmc: avoid write to CDTHRCTL on older versions
commit 66dfd10173 upstream.

Commit f1d2736c81 (mmc: dw_mmc: control card read threshold) added
dw_mci_ctrl_rd_thld() with an unconditional write to the CDTHRCTL
register at offset 0x100. However before version 240a, the FIFO region
started at 0x100, so the write messes with the FIFO and completely
breaks the driver.

If the version id < 240A, return early from dw_mci_ctl_rd_thld() so as
not to hit this problem.

Fixes: f1d2736c81 (mmc: dw_mmc: control card read threshold)
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:16 -08:00
Dmitry Eremin-Solenikov 39a67594a7 mfd: tc6393xb: Fail ohci suspend if full state restore is required
commit 1a5fb99de4 upstream.

Some boards with TC6393XB chip require full state restore during system
resume thanks to chip's VCC being cut off during suspend (Sharp SL-6000
tosa is one of them). Failing to do so would result in ohci Oops on
resume due to internal memory contentes being changed. Fail ohci suspend
on tc6393xb is full state restore is required.

Recommended workaround is to unbind tmio-ohci driver before suspend and
rebind it after resume.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:16 -08:00
Tony Lindgren ff1589b52f mfd: twl4030-power: Fix regression with missing compatible flag
commit 1b9b46d05f upstream.

Commit e7cd1d1eb1 ("mfd: twl4030-power: Add generic reset
configuration") accidentally removed the compatible flag for
"ti,twl4030-power" that should be there as documented in the
binding.

If "ti,twl4030-power" only the poweroff configuration is done
by the driver.

Fixes: e7cd1d1eb1 ("mfd: twl4030-power: Add generic reset configuration")
Reported-by: "Dr. H. Nikolaus Schaller" <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:15 -08:00
Sonny Rao 82c236bcbe clocksource: arch_timer: Fix code to use physical timers when requested
commit 0b46b8a718 upstream.

This is a bug fix for using physical arch timers when
the arch_timer_use_virtual boolean is false.  It restores the
arch_counter_get_cntpct() function after removal in

0d651e4e "clocksource: arch_timer: use virtual counters"

We need this on certain ARMv7 systems which are architected like this:

* The firmware doesn't know and doesn't care about hypervisor mode and
  we don't want to add the complexity of hypervisor there.

* The firmware isn't involved in SMP bringup or resume.

* The ARCH timer come up with an uninitialized offset between the
  virtual and physical counters.  Each core gets a different random
  offset.

* The device boots in "Secure SVC" mode.

* Nothing has touched the reset value of CNTHCTL.PL1PCEN or
  CNTHCTL.PL1PCTEN (both default to 1 at reset)

One example of such as system is RK3288 where it is much simpler to
use the physical counter since there's nobody managing the offset and
each time a core goes down and comes back up it will get reinitialized
to some other random value.

Fixes: 0d651e4e65 ("clocksource: arch_timer: use virtual counters")
Signed-off-by: Sonny Rao <sonnyrao@chromium.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:15 -08:00
Hante Meuleman 0fb5df0d6a brcmfmac: Fix bitmap malloc bug in msgbuf.
commit 333c2aa029 upstream.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:15 -08:00
Andy Lutomirski ead468da11 x86, kvm: Clear paravirt_enabled on KVM guests for espfix32's benefit
commit 29fa682546 upstream.

paravirt_enabled has the following effects:

 - Disables the F00F bug workaround warning.  There is no F00F bug
   workaround any more because Linux's standard IDT handling already
   works around the F00F bug, but the warning still exists.  This
   is only cosmetic, and, in any event, there is no such thing as
   KVM on a CPU with the F00F bug.

 - Disables 32-bit APM BIOS detection.  On a KVM paravirt system,
   there should be no APM BIOS anyway.

 - Disables tboot.  I think that the tboot code should check the
   CPUID hypervisor bit directly if it matters.

 - paravirt_enabled disables espfix32.  espfix32 should *not* be
   disabled under KVM paravirt.

The last point is the purpose of this patch.  It fixes a leak of the
high 16 bits of the kernel stack address on 32-bit KVM paravirt
guests.  Fixes CVE-2014-8134.

Suggested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:15 -08:00
Andy Lutomirski a1f3f3d87a x86_64, switch_to(): Load TLS descriptors before switching DS and ES
commit f647d7c155 upstream.

Otherwise, if buggy user code points DS or ES into the TLS
array, they would be corrupted after a context switch.

This also significantly improves the comments and documents some
gotchas in the code.

Before this patch, the both tests below failed.  With this
patch, the es test passes, although the gsbase test still fails.

 ----- begin es test -----

/*
 * Copyright (c) 2014 Andy Lutomirski
 * GPL v2
 */

static unsigned short GDT3(int idx)
{
	return (idx << 3) | 3;
}

static int create_tls(int idx, unsigned int base)
{
	struct user_desc desc = {
		.entry_number    = idx,
		.base_addr       = base,
		.limit           = 0xfffff,
		.seg_32bit       = 1,
		.contents        = 0, /* Data, grow-up */
		.read_exec_only  = 0,
		.limit_in_pages  = 1,
		.seg_not_present = 0,
		.useable         = 0,
	};

	if (syscall(SYS_set_thread_area, &desc) != 0)
		err(1, "set_thread_area");

	return desc.entry_number;
}

int main()
{
	int idx = create_tls(-1, 0);
	printf("Allocated GDT index %d\n", idx);

	unsigned short orig_es;
	asm volatile ("mov %%es,%0" : "=rm" (orig_es));

	int errors = 0;
	int total = 1000;
	for (int i = 0; i < total; i++) {
		asm volatile ("mov %0,%%es" : : "rm" (GDT3(idx)));
		usleep(100);

		unsigned short es;
		asm volatile ("mov %%es,%0" : "=rm" (es));
		asm volatile ("mov %0,%%es" : : "rm" (orig_es));
		if (es != GDT3(idx)) {
			if (errors == 0)
				printf("[FAIL]\tES changed from 0x%hx to 0x%hx\n",
				       GDT3(idx), es);
			errors++;
		}
	}

	if (errors) {
		printf("[FAIL]\tES was corrupted %d/%d times\n", errors, total);
		return 1;
	} else {
		printf("[OK]\tES was preserved\n");
		return 0;
	}
}

 ----- end es test -----

 ----- begin gsbase test -----

/*
 * gsbase.c, a gsbase test
 * Copyright (c) 2014 Andy Lutomirski
 * GPL v2
 */

static unsigned char *testptr, *testptr2;

static unsigned char read_gs_testvals(void)
{
	unsigned char ret;
	asm volatile ("movb %%gs:%1, %0" : "=r" (ret) : "m" (*testptr));
	return ret;
}

int main()
{
	int errors = 0;

	testptr = mmap((void *)0x200000000UL, 1, PROT_READ | PROT_WRITE,
		       MAP_PRIVATE | MAP_FIXED | MAP_ANONYMOUS, -1, 0);
	if (testptr == MAP_FAILED)
		err(1, "mmap");

	testptr2 = mmap((void *)0x300000000UL, 1, PROT_READ | PROT_WRITE,
		       MAP_PRIVATE | MAP_FIXED | MAP_ANONYMOUS, -1, 0);
	if (testptr2 == MAP_FAILED)
		err(1, "mmap");

	*testptr = 0;
	*testptr2 = 1;

	if (syscall(SYS_arch_prctl, ARCH_SET_GS,
		    (unsigned long)testptr2 - (unsigned long)testptr) != 0)
		err(1, "ARCH_SET_GS");

	usleep(100);

	if (read_gs_testvals() == 1) {
		printf("[OK]\tARCH_SET_GS worked\n");
	} else {
		printf("[FAIL]\tARCH_SET_GS failed\n");
		errors++;
	}

	asm volatile ("mov %0,%%gs" : : "r" (0));

	if (read_gs_testvals() == 0) {
		printf("[OK]\tWriting 0 to gs worked\n");
	} else {
		printf("[FAIL]\tWriting 0 to gs failed\n");
		errors++;
	}

	usleep(100);

	if (read_gs_testvals() == 0) {
		printf("[OK]\tgsbase is still zero\n");
	} else {
		printf("[FAIL]\tgsbase was corrupted\n");
		errors++;
	}

	return errors == 0 ? 0 : 1;
}

 ----- end gsbase test -----

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/509d27c9fec78217691c3dad91cec87e1006b34a.1418075657.git.luto@amacapital.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:15 -08:00
Andy Lutomirski 7cc556d2e1 x86/tls: Disallow unusual TLS segments
commit 0e58af4e1d upstream.

Users have no business installing custom code segments into the
GDT, and segments that are not present but are otherwise valid
are a historical source of interesting attacks.

For completeness, block attempts to set the L bit.  (Prior to
this patch, the L bit would have been silently dropped.)

This is an ABI break.  I've checked glibc, musl, and Wine, and
none of them look like they'll have any trouble.

Note to stable maintainers: this is a hardening patch that fixes
no known bugs.  Given the possibility of ABI issues, this
probably shouldn't be backported quickly.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:14 -08:00
Andy Lutomirski b9372b87cd x86/tls: Validate TLS entries to protect espfix
commit 41bdc78544 upstream.

Installing a 16-bit RW data segment into the GDT defeats espfix.
AFAICT this will not affect glibc, Wine, or dosemu at all.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:14 -08:00
Jan Kara b6d20edb6e isofs: Fix infinite looping over CE entries
commit f54e18f1b8 upstream.

Rock Ridge extensions define so called Continuation Entries (CE) which
define where is further space with Rock Ridge data. Corrupted isofs
image can contain arbitrarily long chain of these, including a one
containing loop and thus causing kernel to end in an infinite loop when
traversing these entries.

Limit the traversal to 32 entries which should be more than enough space
to store all the Rock Ridge data.

Reported-by: P J P <ppandit@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-08 10:30:14 -08:00
Greg Kroah-Hartman 39ca4845f1 Linux 3.18.1 2014-12-16 09:39:45 -08:00
Takashi Iwai 72e9a6c522 ALSA: usb-audio: Don't resubmit pending URBs at MIDI error recovery
commit 66139a48ce upstream.

In snd_usbmidi_error_timer(), the driver tries to resubmit MIDI input
URBs to reactivate the MIDI stream, but this causes the error when
some of URBs are still pending like:

 WARNING: CPU: 0 PID: 0 at ../drivers/usb/core/urb.c:339 usb_submit_urb+0x5f/0x70()
 URB ef705c40 submitted while active
 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.16.6-2-desktop #1
 Hardware name: FOXCONN TPS01/TPS01, BIOS 080015  03/23/2010
  c0984bfa f4009ed4 c078deaf f4009ee4 c024c884 c09a135c f4009f00 00000000
  c0984bfa 00000153 c061ac4f c061ac4f 00000009 00000001 ef705c40 e854d1c0
  f4009eec c024c8d3 00000009 f4009ee4 c09a135c f4009f00 f4009f04 c061ac4f
 Call Trace:
  [<c0205df6>] try_stack_unwind+0x156/0x170
  [<c020482a>] dump_trace+0x5a/0x1b0
  [<c0205e56>] show_trace_log_lvl+0x46/0x50
  [<c02049d1>] show_stack_log_lvl+0x51/0xe0
  [<c0205eb7>] show_stack+0x27/0x50
  [<c078deaf>] dump_stack+0x45/0x65
  [<c024c884>] warn_slowpath_common+0x84/0xa0
  [<c024c8d3>] warn_slowpath_fmt+0x33/0x40
  [<c061ac4f>] usb_submit_urb+0x5f/0x70
  [<f7974104>] snd_usbmidi_submit_urb+0x14/0x60 [snd_usbmidi_lib]
  [<f797483a>] snd_usbmidi_error_timer+0x6a/0xa0 [snd_usbmidi_lib]
  [<c02570c0>] call_timer_fn+0x30/0x130
  [<c0257442>] run_timer_softirq+0x1c2/0x260
  [<c0251493>] __do_softirq+0xc3/0x270
  [<c0204732>] do_softirq_own_stack+0x22/0x30
  [<c025186d>] irq_exit+0x8d/0xa0
  [<c0795228>] smp_apic_timer_interrupt+0x38/0x50
  [<c0794a3c>] apic_timer_interrupt+0x34/0x3c
  [<c0673d9e>] cpuidle_enter_state+0x3e/0xd0
  [<c028bb8d>] cpu_idle_loop+0x29d/0x3e0
  [<c028bd23>] cpu_startup_entry+0x53/0x60
  [<c0bfac1e>] start_kernel+0x415/0x41a

For avoiding these errors, check the pending URBs and skip
resubmitting such ones.

Reported-and-tested-by: Stefan Seyfried <stefan.seyfried@googlemail.com>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16 09:39:07 -08:00
Takashi Iwai bf5f983f3b ALSA: hda - Fix built-in mic at resume on Lenovo Ideapad S210
commit fedb2245cb upstream.

The built-in mic boost volume gets almost muted after suspend/resume
on Lenovo Ideapad S210.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88121
Reported-and-tested-by: Roman Kagan <rkagan@mail.ru>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16 09:39:07 -08:00
Takashi Iwai a12df59274 ALSA: hda - Add EAPD fixup for ASUS Z99He laptop
commit f62f5eff3d upstream.

The same fixup to enable EAPD is needed for ASUS Z99He with AD1986A
codec like another ASUS machine.

Reported-and-tested-by: Dmitry V. Zimin <pfzim@mail.ru>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16 09:39:07 -08:00
Al Viro 6c1fbfffec deal with deadlock in d_walk()
commit ca5358ef75 upstream.

... by not hitting rename_retry for reasons other than rename having
happened.  In other words, do _not_ restart when finding that
between unlocking the child and locking the parent the former got
into __dentry_kill().  Skip the killed siblings instead...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16 09:39:06 -08:00
Al Viro 679829c2e5 move d_rcu from overlapping d_child to overlapping d_alias
commit 946e51f2bf upstream.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16 09:39:06 -08:00
Larry Finger 3fd3a62433 rtlwifi: rtl8192ce: Fix missing interrupt ready flag
commit 87141db084 upstream.

Proper operation with the rewritten PCI mini driver requires that a flag be set
when interrupts are enabled. This flag was missed.  This patch is one of three needed to
fix the kernel regression reported at https://bugzilla.kernel.org/show_bug.cgi?id=88951.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Reported-by: Catalin Iacob <iacobcatalin@gmail.com>
Tested-by: Catalin Iacob <iacobcatalin@gmail.com>
Cc: Catalin Iacob <iacobcatalin@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16 09:39:06 -08:00
Larry Finger 9cd1d3eb26 rtlwifi: rtl8192ce: Fix kernel crashes due to missing callback entry
commit f892914c03 upstream.

In the major update of the rtlwifi-family of drivers, one of the callback entries
was missed, which leads to memory corruption. Unfortunately, this corruption
never caused a kernel oops, but showed up in other parts of the system.
This patch is one of three needed to fix the kernel regression reported at
https://bugzilla.kernel.org/show_bug.cgi?id=88951.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Reported-by: Catalin Iacob <iacobcatalin@gmail.com>
Tested-by: Catalin Iacob <iacobcatalin@gmail.com>
Cc: Catalin Iacob <iacobcatalin@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16 09:39:06 -08:00
Larry Finger 9297b375ec rtlwifi: rtl8192ce: Fix editing error that causes silent memory corruption
commit 99a82f734a upstream.

In the major update of the rtlwifi-family of drivers, there was an editing
mistake. Unfortunately, this particular error leads to memory corruption that
silently leads to failure of the system. This patch is one of three needed to
fix the kernel regression reported at https://bugzilla.kernel.org/show_bug.cgi?id=88951.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Reported-by: Catalin Iacob <iacobcatalin@gmail.com>
Tested-by: Catalin Iacob <iacobcatalin@gmail.com>
Cc: Catalin Iacob <iacobcatalin@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16 09:39:06 -08:00
Daniel Borkmann 4b1c83d8c3 netlink: use jhash as hashfn for rhashtable
[ Upstream commit 7f19fc5e0b ]

For netlink, we shouldn't be using arch_fast_hash() as a hashing
discipline, but rather jhash() instead.

Since netlink sockets can be opened by any user, a local attacker
would be able to easily create collisions with the DPDK-derived
arch_fast_hash(), which trades off performance for security by
using crc32 CPU instructions on x86_64.

While it might have a legimite use case in other places, it should
be avoided in netlink context, though. As rhashtable's API is very
flexible, we could later on still decide on other hashing disciplines,
if legitimate.

Reference: http://thread.gmane.org/gmane.linux.kernel/1844123
Fixes: e341694e3e ("netlink: Convert netlink_lookup() to use RCU protected hash table")
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16 09:39:06 -08:00
Valdis.Kletnieks@vt.edu 01da9f8b6b net: fix suspicious rcu_dereference_check in net/sched/sch_fq_codel.c
[ Upstream commit 69204cf7eb ]

commit 46e5da40ae (net: qdisc: use rcu prefix and silence
 sparse warnings) triggers a spurious warning:

net/sched/sch_fq_codel.c:97 suspicious rcu_dereference_check() usage!

The code should be using the _bh variant of rcu_dereference.

Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16 09:39:06 -08:00
David Vrabel 21ac2deb8e xen-netfront: use correct linear area after linearizing an skb
[ Upstream commit 11d3d2a16c ]

Commit 97a6d1bb2b (xen-netfront: Fix
handling packets on compound pages with skb_linearize) attempted to
fix a problem where an skb that would have required too many slots
would be dropped causing TCP connections to stall.

However, it filled in the first slot using the original buffer and not
the new one and would use the wrong offset and grant access to the
wrong page.

Netback would notice the malformed request and stop all traffic on the
VIF, reporting:

    vif vif-3-0 vif3.0: txreq.offset: 85e, size: 4002, end: 6144
    vif vif-3-0 vif3.0: fatal error; disabling device

Reported-by: Anthony Wright <anthony@overnetdata.com>
Tested-by: Anthony Wright <anthony@overnetdata.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16 09:39:05 -08:00
Eric Dumazet 7efe8f1bb7 tcp: fix more NULL deref after prequeue changes
[ Upstream commit 0f85feae6b ]

When I cooked commit c3658e8d0f ("tcp: fix possible NULL dereference in
tcp_vX_send_reset()") I missed other spots we could deref a NULL
skb_dst(skb)

Again, if a socket is provided, we do not need skb_dst() to get a
pointer to network namespace : sock_net(sk) is good enough.

Reported-by: Dann Frazier <dann.frazier@canonical.com>
Bisected-by: Dann Frazier <dann.frazier@canonical.com>
Tested-by: Dann Frazier <dann.frazier@canonical.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: ca777eff51 ("tcp: remove dst refcount false sharing for prequeue mode")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16 09:39:05 -08:00
Daniel Borkmann ab12ec41d8 net: sctp: use MAX_HEADER for headroom reserve in output path
[ Upstream commit 9772b54c55 ]

To accomodate for enough headroom for tunnels, use MAX_HEADER instead
of LL_MAX_HEADER. Robert reported that he has hit after roughly 40hrs
of trinity an skb_under_panic() via SCTP output path (see reference).
I couldn't reproduce it from here, but not using MAX_HEADER as elsewhere
in other protocols might be one possible cause for this.

In any case, it looks like accounting on chunks themself seems to look
good as the skb already passed the SCTP output path and did not hit
any skb_over_panic(). Given tunneling was enabled in his .config, the
headroom would have been expanded by MAX_HEADER in this case.

Reported-by: Robert Święcki <robert@swiecki.net>
Reference: https://lkml.org/lkml/2014/12/1/507
Fixes: 594ccc14df ("[SCTP] Replace incorrect use of dev_alloc_skb with alloc_skb in sctp_packet_transmit().")
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16 09:39:05 -08:00
Eric Dumazet e7b7e0c27c net: mvneta: fix race condition in mvneta_tx()
[ Upstream commit 5f478b4103 ]

mvneta_tx() dereferences skb to get skb->len too late,
as hardware might have completed the transmit and TX completion
could have freed the skb from another cpu.

Fixes: 71f6d1b31f ("net: mvneta: replace Tx timer with a real interrupt")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16 09:39:05 -08:00
willy tarreau 9823d713bf net: mvneta: fix Tx interrupt delay
[ Upstream commit aebea2ba0f ]

The mvneta driver sets the amount of Tx coalesce packets to 16 by
default. Normally that does not cause any trouble since the driver
uses a much larger Tx ring size (532 packets). But some sockets
might run with very small buffers, much smaller than the equivalent
of 16 packets. This is what ping is doing for example, by setting
SNDBUF to 324 bytes rounded up to 2kB by the kernel.

The problem is that there is no documented method to force a specific
packet to emit an interrupt (eg: the last of the ring) nor is it
possible to make the NIC emit an interrupt after a given delay.

In this case, it causes trouble, because when ping sends packets over
its raw socket, the few first packets leave the system, and the first
15 packets will be emitted without an IRQ being generated, so without
the skbs being freed. And since the socket's buffer is small, there's
no way to reach that amount of packets, and the ping ends up with
"send: no buffer available" after sending 6 packets. Running with 3
instances of ping in parallel is enough to hide the problem, because
with 6 packets per instance, that's 18 packets total, which is enough
to grant a Tx interrupt before all are sent.

The original driver in the LSP kernel worked around this design flaw
by using a software timer to clean up the Tx descriptors. This timer
was slow and caused terrible network performance on some Tx-bound
workloads (such as routing) but was enough to make tools like ping
work correctly.

Instead here, we simply set the packet counts before interrupt to 1.
This ensures that each packet sent will produce an interrupt. NAPI
takes care of coalescing interrupts since the interrupt is disabled
once generated.

No measurable performance impact nor CPU usage were observed on small
nor large packets, including when saturating the link on Tx, and this
fixes tools like ping which rely on too small a send buffer. If one
wants to increase this value for certain workloads where it is safe
to do so, "ethtool -C $dev tx-frames" will override this default
setting.

This fix needs to be applied to stable kernels starting with 3.10.

Tested-By: Maggie Mae Roxas <maggie.mae.roxas@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16 09:39:05 -08:00
Denis Kirjanov 6c2f1fef82 mips: bpf: Fix broken BPF_MOD
[ Upstream commit 2e46477a12 ]

Remove optimize_div() from BPF_MOD | BPF_K case
since we don't know the dividend and fix the
emit_mod() by reading the mod operation result from HI register

Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16 09:39:05 -08:00
Pravin B Shelar 3e496d49f3 openvswitch: Fix flow mask validation.
[ Upstream commit f2a01517f2 ]

Following patch fixes typo in the flow validation. This prevented
installation of ARP and IPv6 flows.

Fixes: 19e7a3df72 ("openvswitch: Fix NDP flow mask validation")
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Reviewed-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16 09:39:05 -08:00
Tom Herbert 435dcf66f0 gre: Set inner mac header in gro complete
[ Upstream commit 6fb2a75673 ]

Set the inner mac header to point to the GRE payload when
doing GRO. This is needed if we proceed to send the packet
through GRE GSO which now uses the inner mac header instead
of inner network header to determine the length of encapsulation
headers.

Fixes: 14051f0452 ("gre: Use inner mac length when computing tunnel length")
Reported-by: Wolfgang Walter <linux@stwm.de>
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16 09:39:04 -08:00
Marcelo Leitner 8407165b42 Fix race condition between vxlan_sock_add and vxlan_sock_release
[ Upstream commit 00c83b01d5 ]

Currently, when trying to reuse a socket, vxlan_sock_add will grab
vn->sock_lock, locate a reusable socket, inc refcount and release
vn->sock_lock.

But vxlan_sock_release() will first decrement refcount, and then grab
that lock. refcnt operations are atomic but as currently we have
deferred works which hold vs->refcnt each, this might happen, leading to
a use after free (specially after vxlan_igmp_leave):

  CPU 1                            CPU 2

deferred work                    vxlan_sock_add
  ...                              ...
                                   spin_lock(&vn->sock_lock)
                                   vs = vxlan_find_sock();
  vxlan_sock_release
    dec vs->refcnt, reaches 0
    spin_lock(&vn->sock_lock)
                                   vxlan_sock_hold(vs), refcnt=1
                                   spin_unlock(&vn->sock_lock)
    hlist_del_rcu(&vs->hlist);
    vxlan_notify_del_rx_port(vs)
    spin_unlock(&vn->sock_lock)

So when we look for a reusable socket, we check if it wasn't freed
already before reusing it.

Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com>
Fixes: 7c47cedf43 ("vxlan: move IGMP join/leave to work queue")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16 09:39:04 -08:00
137 changed files with 1230 additions and 456 deletions
+1 -1
View File
@@ -1,6 +1,6 @@
VERSION = 3
PATCHLEVEL = 18
SUBLEVEL = 0
SUBLEVEL = 2
EXTRAVERSION =
NAME = Diseased Newt
-24
View File
@@ -102,30 +102,6 @@
broken-cd;
};
pinctrl {
/*
* These pins might be muxed as I2S by
* the bootloader, but it conflicts
* with the real I2S pins that are
* muxed using i2s_pins. We must mux
* those pins to a function other than
* I2S.
*/
pinctrl-0 = <&hog_pins1 &hog_pins2>;
pinctrl-names = "default";
hog_pins1: hog-pins1 {
marvell,pins = "mpp6", "mpp8", "mpp10",
"mpp12", "mpp13";
marvell,function = "gpio";
};
hog_pins2: hog-pins2 {
marvell,pins = "mpp5", "mpp7", "mpp9";
marvell,function = "gpo";
};
};
usb@50000 {
status = "okay";
};
+5 -5
View File
@@ -106,11 +106,6 @@
reg = <0x11100 0x20>;
};
system-controller@18200 {
compatible = "marvell,armada-370-xp-system-controller";
reg = <0x18200 0x100>;
};
pinctrl {
compatible = "marvell,mv88f6710-pinctrl";
reg = <0x18000 0x38>;
@@ -205,6 +200,11 @@
interrupts = <91>;
};
system-controller@18200 {
compatible = "marvell,armada-370-xp-system-controller";
reg = <0x18200 0x100>;
};
gateclk: clock-gating-control@18220 {
compatible = "marvell,armada-370-gating-clock";
reg = <0x18220 0x4>;
+9
View File
@@ -78,6 +78,15 @@ static inline u32 arch_timer_get_cntfrq(void)
return val;
}
static inline u64 arch_counter_get_cntpct(void)
{
u64 cval;
isb();
asm volatile("mrrc p15, 0, %Q0, %R0, c14" : "=r" (cval));
return cval;
}
static inline u64 arch_counter_get_cntvct(void)
{
u64 cval;
+30 -14
View File
@@ -361,25 +361,41 @@ static int coherency_type(void)
{
struct device_node *np;
const struct of_device_id *match;
int type;
/*
* The coherency fabric is needed:
* - For coherency between processors on Armada XP, so only
* when SMP is enabled.
* - For coherency between the processor and I/O devices, but
* this coherency requires many pre-requisites (write
* allocate cache policy, shareable pages, SMP bit set) that
* are only meant in SMP situations.
*
* Note that this means that on Armada 370, there is currently
* no way to use hardware I/O coherency, because even when
* CONFIG_SMP is enabled, is_smp() returns false due to the
* Armada 370 being a single-core processor. To lift this
* limitation, we would have to find a way to make the cache
* policy set to write-allocate (on all Armada SoCs), and to
* set the shareable attribute in page tables (on all Armada
* SoCs except the Armada 370). Unfortunately, such decisions
* are taken very early in the kernel boot process, at a point
* where we don't know yet on which SoC we are running.
*/
if (!is_smp())
return COHERENCY_FABRIC_TYPE_NONE;
np = of_find_matching_node_and_match(NULL, of_coherency_table, &match);
if (np) {
int type = (int) match->data;
if (!np)
return COHERENCY_FABRIC_TYPE_NONE;
/* Armada 370/XP coherency works in both UP and SMP */
if (type == COHERENCY_FABRIC_TYPE_ARMADA_370_XP)
return type;
type = (int) match->data;
/* Armada 375 coherency works only on SMP */
else if (type == COHERENCY_FABRIC_TYPE_ARMADA_375 && is_smp())
return type;
of_node_put(np);
/* Armada 380 coherency works only on SMP */
else if (type == COHERENCY_FABRIC_TYPE_ARMADA_380 && is_smp())
return type;
}
return COHERENCY_FABRIC_TYPE_NONE;
return type;
}
int coherency_available(void)
+19 -2
View File
@@ -24,7 +24,10 @@
#include <asm/cp15.h>
.text
/* Returns the coherency base address in r1 (r0 is untouched) */
/*
* Returns the coherency base address in r1 (r0 is untouched), or 0 if
* the coherency fabric is not enabled.
*/
ENTRY(ll_get_coherency_base)
mrc p15, 0, r1, c1, c0, 0
tst r1, #CR_M @ Check MMU bit enabled
@@ -32,8 +35,13 @@ ENTRY(ll_get_coherency_base)
/*
* MMU is disabled, use the physical address of the coherency
* base address.
* base address. However, if the coherency fabric isn't mapped
* (i.e its virtual address is zero), it means coherency is
* not enabled, so we return 0.
*/
ldr r1, =coherency_base
cmp r1, #0
beq 2f
adr r1, 3f
ldr r3, [r1]
ldr r1, [r1, r3]
@@ -85,6 +93,9 @@ ENTRY(ll_add_cpu_to_smp_group)
*/
mov r0, lr
bl ll_get_coherency_base
/* Bail out if the coherency is not enabled */
cmp r1, #0
reteq r0
bl ll_get_coherency_cpumask
mov lr, r0
add r0, r1, #ARMADA_XP_CFB_CFG_REG_OFFSET
@@ -107,6 +118,9 @@ ENTRY(ll_enable_coherency)
*/
mov r0, lr
bl ll_get_coherency_base
/* Bail out if the coherency is not enabled */
cmp r1, #0
reteq r0
bl ll_get_coherency_cpumask
mov lr, r0
add r0, r1, #ARMADA_XP_CFB_CTL_REG_OFFSET
@@ -131,6 +145,9 @@ ENTRY(ll_disable_coherency)
*/
mov r0, lr
bl ll_get_coherency_base
/* Bail out if the coherency is not enabled */
cmp r1, #0
reteq r0
bl ll_get_coherency_cpumask
mov lr, r0
add r0, r1, #ARMADA_XP_CFB_CTL_REG_OFFSET
+1
View File
@@ -51,6 +51,7 @@ ENTRY(tegra_resume)
THUMB( it ne )
bne cpu_resume @ no
tegra_get_soc_id TEGRA_APB_MISC_BASE, r6
/* Are we on Tegra20? */
cmp r6, #TEGRA20
beq 1f @ Yes
+9
View File
@@ -104,6 +104,15 @@ static inline void arch_timer_set_cntkctl(u32 cntkctl)
asm volatile("msr cntkctl_el1, %0" : : "r" (cntkctl));
}
static inline u64 arch_counter_get_cntpct(void)
{
/*
* AArch64 kernel and user space mandate the use of CNTVCT.
*/
BUG();
return 0;
}
static inline u64 arch_counter_get_cntvct(void)
{
u64 cval;
+1
View File
@@ -30,6 +30,7 @@
#define COMPAT_HWCAP_IDIVA (1 << 17)
#define COMPAT_HWCAP_IDIVT (1 << 18)
#define COMPAT_HWCAP_IDIV (COMPAT_HWCAP_IDIVA|COMPAT_HWCAP_IDIVT)
#define COMPAT_HWCAP_LPAE (1 << 20)
#define COMPAT_HWCAP_EVTSTRM (1 << 21)
#define COMPAT_HWCAP2_AES (1 << 0)
+2 -1
View File
@@ -72,7 +72,8 @@ EXPORT_SYMBOL_GPL(elf_hwcap);
COMPAT_HWCAP_FAST_MULT|COMPAT_HWCAP_EDSP|\
COMPAT_HWCAP_TLS|COMPAT_HWCAP_VFP|\
COMPAT_HWCAP_VFPv3|COMPAT_HWCAP_VFPv4|\
COMPAT_HWCAP_NEON|COMPAT_HWCAP_IDIV)
COMPAT_HWCAP_NEON|COMPAT_HWCAP_IDIV|\
COMPAT_HWCAP_LPAE)
unsigned int compat_elf_hwcap __read_mostly = COMPAT_ELF_HWCAP_DEFAULT;
unsigned int compat_elf_hwcap2 __read_mostly;
#endif
+8 -5
View File
@@ -60,7 +60,7 @@ struct jit_ctx {
const struct bpf_prog *prog;
int idx;
int tmp_used;
int body_offset;
int epilogue_offset;
int *offset;
u32 *image;
};
@@ -130,8 +130,8 @@ static void jit_fill_hole(void *area, unsigned int size)
static inline int epilogue_offset(const struct jit_ctx *ctx)
{
int to = ctx->offset[ctx->prog->len - 1];
int from = ctx->idx - ctx->body_offset;
int to = ctx->epilogue_offset;
int from = ctx->idx;
return to - from;
}
@@ -463,6 +463,8 @@ emit_cond_jmp:
}
/* function return */
case BPF_JMP | BPF_EXIT:
/* Optimization: when last instruction is EXIT,
simply fallthrough to epilogue. */
if (i == ctx->prog->len - 1)
break;
jmp_offset = epilogue_offset(ctx);
@@ -685,11 +687,13 @@ void bpf_int_jit_compile(struct bpf_prog *prog)
/* 1. Initial fake pass to compute ctx->idx. */
/* Fake pass to fill in ctx->offset. */
/* Fake pass to fill in ctx->offset and ctx->tmp_used. */
if (build_body(&ctx))
goto out;
build_prologue(&ctx);
ctx.epilogue_offset = ctx.idx;
build_epilogue(&ctx);
/* Now we know the actual image size. */
@@ -706,7 +710,6 @@ void bpf_int_jit_compile(struct bpf_prog *prog)
build_prologue(&ctx);
ctx.body_offset = ctx.idx;
if (build_body(&ctx)) {
bpf_jit_binary_free(header);
goto out;
+2 -2
View File
@@ -426,7 +426,7 @@ static inline void emit_mod(unsigned int dst, unsigned int src,
u32 *p = &ctx->target[ctx->idx];
uasm_i_divu(&p, dst, src);
p = &ctx->target[ctx->idx + 1];
uasm_i_mflo(&p, dst);
uasm_i_mfhi(&p, dst);
}
ctx->idx += 2; /* 2 insts */
}
@@ -971,7 +971,7 @@ load_ind:
break;
case BPF_ALU | BPF_MOD | BPF_K:
/* A %= k */
if (k == 1 || optimize_div(&k)) {
if (k == 1) {
ctx->flags |= SEEN_A;
emit_jit_reg_move(r_A, r_zero, ctx);
} else {
+1 -1
View File
@@ -164,7 +164,7 @@ static void spufs_prune_dir(struct dentry *dir)
struct dentry *dentry, *tmp;
mutex_lock(&dir->d_inode->i_mutex);
list_for_each_entry_safe(dentry, tmp, &dir->d_subdirs, d_u.d_child) {
list_for_each_entry_safe(dentry, tmp, &dir->d_subdirs, d_child) {
spin_lock(&dentry->d_lock);
if (!(d_unhashed(dentry)) && dentry->d_inode) {
dget_dlock(dentry);
+1 -1
View File
@@ -249,7 +249,7 @@ COMPAT_SYSCALL_DEFINE2(s390_setgroups16, int, gidsetsize, u16 __user *, grouplis
struct group_info *group_info;
int retval;
if (!capable(CAP_SETGID))
if (!may_setgroups())
return -EPERM;
if ((unsigned)gidsetsize > NGROUPS_MAX)
return -EINVAL;
+2
View File
@@ -78,6 +78,7 @@ static inline void __exit exit_amd_microcode(void) {}
extern void __init load_ucode_bsp(void);
extern void load_ucode_ap(void);
extern int __init save_microcode_in_initrd(void);
void reload_early_microcode(void);
#else
static inline void __init load_ucode_bsp(void) {}
static inline void load_ucode_ap(void) {}
@@ -85,6 +86,7 @@ static inline int __init save_microcode_in_initrd(void)
{
return 0;
}
static inline void reload_early_microcode(void) {}
#endif
#endif /* _ASM_X86_MICROCODE_H */
+3 -1
View File
@@ -59,7 +59,7 @@ static inline u16 find_equiv_id(struct equiv_cpu_entry *equiv_cpu_table,
extern int __apply_microcode_amd(struct microcode_amd *mc_amd);
extern int apply_microcode_amd(int cpu);
extern enum ucode_state load_microcode_amd(u8 family, const u8 *data, size_t size);
extern enum ucode_state load_microcode_amd(int cpu, u8 family, const u8 *data, size_t size);
#define PATCH_MAX_SIZE PAGE_SIZE
extern u8 amd_ucode_patch[PATCH_MAX_SIZE];
@@ -68,10 +68,12 @@ extern u8 amd_ucode_patch[PATCH_MAX_SIZE];
extern void __init load_ucode_amd_bsp(void);
extern void load_ucode_amd_ap(void);
extern int __init save_microcode_in_initrd_amd(void);
void reload_ucode_amd(void);
#else
static inline void __init load_ucode_amd_bsp(void) {}
static inline void load_ucode_amd_ap(void) {}
static inline int __init save_microcode_in_initrd_amd(void) { return -EINVAL; }
void reload_ucode_amd(void) {}
#endif
#endif /* _ASM_X86_MICROCODE_AMD_H */
+2
View File
@@ -68,11 +68,13 @@ extern void __init load_ucode_intel_bsp(void);
extern void load_ucode_intel_ap(void);
extern void show_ucode_info_early(void);
extern int __init save_microcode_in_initrd_intel(void);
void reload_ucode_intel(void);
#else
static inline __init void load_ucode_intel_bsp(void) {}
static inline void load_ucode_intel_ap(void) {}
static inline void show_ucode_info_early(void) {}
static inline int __init save_microcode_in_initrd_intel(void) { return -EINVAL; }
static inline void reload_ucode_intel(void) {}
#endif
#if defined(CONFIG_MICROCODE_INTEL_EARLY) && defined(CONFIG_HOTPLUG_CPU)
+7
View File
@@ -28,6 +28,13 @@ struct user_desc {
unsigned int seg_not_present:1;
unsigned int useable:1;
#ifdef __x86_64__
/*
* Because this bit is not present in 32-bit user code, user
* programs can pass uninitialized values here. Therefore, in
* any context in which a user_desc comes from a 32-bit program,
* the kernel must act as though lm == 0, regardless of the
* actual value.
*/
unsigned int lm:1;
#endif
};
+4 -4
View File
@@ -376,7 +376,7 @@ static enum ucode_state __load_microcode_amd(u8 family, const u8 *data,
return UCODE_OK;
}
enum ucode_state load_microcode_amd(u8 family, const u8 *data, size_t size)
enum ucode_state load_microcode_amd(int cpu, u8 family, const u8 *data, size_t size)
{
enum ucode_state ret;
@@ -390,8 +390,8 @@ enum ucode_state load_microcode_amd(u8 family, const u8 *data, size_t size)
#if defined(CONFIG_MICROCODE_AMD_EARLY) && defined(CONFIG_X86_32)
/* save BSP's matching patch for early load */
if (cpu_data(smp_processor_id()).cpu_index == boot_cpu_data.cpu_index) {
struct ucode_patch *p = find_patch(smp_processor_id());
if (cpu_data(cpu).cpu_index == boot_cpu_data.cpu_index) {
struct ucode_patch *p = find_patch(cpu);
if (p) {
memset(amd_ucode_patch, 0, PATCH_MAX_SIZE);
memcpy(amd_ucode_patch, p->data, min_t(u32, ksize(p->data),
@@ -444,7 +444,7 @@ static enum ucode_state request_microcode_amd(int cpu, struct device *device,
goto fw_release;
}
ret = load_microcode_amd(c->x86, fw->data, fw->size);
ret = load_microcode_amd(cpu, c->x86, fw->data, fw->size);
fw_release:
release_firmware(fw);
+19 -1
View File
@@ -389,7 +389,7 @@ int __init save_microcode_in_initrd_amd(void)
eax = cpuid_eax(0x00000001);
eax = ((eax >> 8) & 0xf) + ((eax >> 20) & 0xff);
ret = load_microcode_amd(eax, container, container_size);
ret = load_microcode_amd(smp_processor_id(), eax, container, container_size);
if (ret != UCODE_OK)
retval = -EINVAL;
@@ -402,3 +402,21 @@ int __init save_microcode_in_initrd_amd(void)
return retval;
}
void reload_ucode_amd(void)
{
struct microcode_amd *mc;
u32 rev, eax;
rdmsr(MSR_AMD64_PATCH_LEVEL, rev, eax);
mc = (struct microcode_amd *)amd_ucode_patch;
if (mc && rev < mc->hdr.patch_id) {
if (!__apply_microcode_amd(mc)) {
ucode_new_rev = mc->hdr.patch_id;
pr_info("microcode: reload patch_level=0x%08x\n",
ucode_new_rev);
}
}
}
+2 -10
View File
@@ -465,16 +465,8 @@ static void mc_bp_resume(void)
if (uci->valid && uci->mc)
microcode_ops->apply_microcode(cpu);
#ifdef CONFIG_X86_64
else if (!uci->mc)
/*
* We might resume and not have applied late microcode but still
* have a newer patch stashed from the early loader. We don't
* have it in uci->mc so we have to load it the same way we're
* applying patches early on the APs.
*/
load_ucode_ap();
#endif
reload_early_microcode();
}
static struct syscore_ops mc_syscore_ops = {
@@ -559,7 +551,7 @@ static int __init microcode_init(void)
struct cpuinfo_x86 *c = &cpu_data(0);
int error;
if (dis_ucode_ldr)
if (paravirt_enabled() || dis_ucode_ldr)
return 0;
if (c->x86_vendor == X86_VENDOR_INTEL)
@@ -176,3 +176,24 @@ int __init save_microcode_in_initrd(void)
return 0;
}
void reload_early_microcode(void)
{
int vendor, x86;
vendor = x86_vendor();
x86 = x86_family();
switch (vendor) {
case X86_VENDOR_INTEL:
if (x86 >= 6)
reload_ucode_intel();
break;
case X86_VENDOR_AMD:
if (x86 >= 0x10)
reload_ucode_amd();
break;
default:
break;
}
}
+34 -8
View File
@@ -650,8 +650,7 @@ static inline void print_ucode(struct ucode_cpu_info *uci)
}
#endif
static int apply_microcode_early(struct mc_saved_data *mc_saved_data,
struct ucode_cpu_info *uci)
static int apply_microcode_early(struct ucode_cpu_info *uci, bool early)
{
struct microcode_intel *mc_intel;
unsigned int val[2];
@@ -680,7 +679,10 @@ static int apply_microcode_early(struct mc_saved_data *mc_saved_data,
#endif
uci->cpu_sig.rev = val[1];
print_ucode(uci);
if (early)
print_ucode(uci);
else
print_ucode_info(uci, mc_intel->hdr.date);
return 0;
}
@@ -715,12 +717,17 @@ _load_ucode_intel_bsp(struct mc_saved_data *mc_saved_data,
unsigned long initrd_end_early,
struct ucode_cpu_info *uci)
{
enum ucode_state ret;
collect_cpu_info_early(uci);
scan_microcode(initrd_start_early, initrd_end_early, mc_saved_data,
mc_saved_in_initrd, uci);
load_microcode(mc_saved_data, mc_saved_in_initrd,
initrd_start_early, uci);
apply_microcode_early(mc_saved_data, uci);
ret = load_microcode(mc_saved_data, mc_saved_in_initrd,
initrd_start_early, uci);
if (ret == UCODE_OK)
apply_microcode_early(uci, true);
}
void __init
@@ -749,7 +756,8 @@ load_ucode_intel_bsp(void)
initrd_end_early = initrd_start_early + ramdisk_size;
_load_ucode_intel_bsp(&mc_saved_data, mc_saved_in_initrd,
initrd_start_early, initrd_end_early, &uci);
initrd_start_early, initrd_end_early,
&uci);
#endif
}
@@ -783,5 +791,23 @@ void load_ucode_intel_ap(void)
collect_cpu_info_early(&uci);
load_microcode(mc_saved_data_p, mc_saved_in_initrd_p,
initrd_start_addr, &uci);
apply_microcode_early(mc_saved_data_p, &uci);
apply_microcode_early(&uci, true);
}
void reload_ucode_intel(void)
{
struct ucode_cpu_info uci;
enum ucode_state ret;
if (!mc_saved_data.mc_saved_count)
return;
collect_cpu_info_early(&uci);
ret = generic_load_microcode_early(mc_saved_data.mc_saved,
mc_saved_data.mc_saved_count, &uci);
if (ret != UCODE_OK)
return;
apply_microcode_early(&uci, false);
}
+8 -1
View File
@@ -283,7 +283,14 @@ NOKPROBE_SYMBOL(do_async_page_fault);
static void __init paravirt_ops_setup(void)
{
pv_info.name = "KVM";
pv_info.paravirt_enabled = 1;
/*
* KVM isn't paravirt in the sense of paravirt_enabled. A KVM
* guest kernel works like a bare metal kernel with additional
* features, and paravirt_enabled is about features that are
* missing.
*/
pv_info.paravirt_enabled = 0;
if (kvm_para_has_feature(KVM_FEATURE_NOP_IO_DELAY))
pv_cpu_ops.io_delay = kvm_io_delay;
-1
View File
@@ -263,7 +263,6 @@ void __init kvmclock_init(void)
#endif
kvm_get_preset_lpj();
clocksource_register_hz(&kvm_clock, NSEC_PER_SEC);
pv_info.paravirt_enabled = 1;
pv_info.name = "KVM";
if (kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE_STABLE_BIT))
+73 -28
View File
@@ -283,24 +283,9 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
fpu = switch_fpu_prepare(prev_p, next_p, cpu);
/*
* Reload esp0, LDT and the page table pointer:
*/
/* Reload esp0 and ss1. */
load_sp0(tss, next);
/*
* Switch DS and ES.
* This won't pick up thread selector changes, but I guess that is ok.
*/
savesegment(es, prev->es);
if (unlikely(next->es | prev->es))
loadsegment(es, next->es);
savesegment(ds, prev->ds);
if (unlikely(next->ds | prev->ds))
loadsegment(ds, next->ds);
/* We must save %fs and %gs before load_TLS() because
* %fs and %gs may be cleared by load_TLS().
*
@@ -309,41 +294,101 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
savesegment(fs, fsindex);
savesegment(gs, gsindex);
/*
* Load TLS before restoring any segments so that segment loads
* reference the correct GDT entries.
*/
load_TLS(next, cpu);
/*
* Leave lazy mode, flushing any hypercalls made here.
* This must be done before restoring TLS segments so
* the GDT and LDT are properly updated, and must be
* done before math_state_restore, so the TS bit is up
* to date.
* Leave lazy mode, flushing any hypercalls made here. This
* must be done after loading TLS entries in the GDT but before
* loading segments that might reference them, and and it must
* be done before math_state_restore, so the TS bit is up to
* date.
*/
arch_end_context_switch(next_p);
/* Switch DS and ES.
*
* Reading them only returns the selectors, but writing them (if
* nonzero) loads the full descriptor from the GDT or LDT. The
* LDT for next is loaded in switch_mm, and the GDT is loaded
* above.
*
* We therefore need to write new values to the segment
* registers on every context switch unless both the new and old
* values are zero.
*
* Note that we don't need to do anything for CS and SS, as
* those are saved and restored as part of pt_regs.
*/
savesegment(es, prev->es);
if (unlikely(next->es | prev->es))
loadsegment(es, next->es);
savesegment(ds, prev->ds);
if (unlikely(next->ds | prev->ds))
loadsegment(ds, next->ds);
/*
* Switch FS and GS.
*
* Segment register != 0 always requires a reload. Also
* reload when it has changed. When prev process used 64bit
* base always reload to avoid an information leak.
* These are even more complicated than FS and GS: they have
* 64-bit bases are that controlled by arch_prctl. Those bases
* only differ from the values in the GDT or LDT if the selector
* is 0.
*
* Loading the segment register resets the hidden base part of
* the register to 0 or the value from the GDT / LDT. If the
* next base address zero, writing 0 to the segment register is
* much faster than using wrmsr to explicitly zero the base.
*
* The thread_struct.fs and thread_struct.gs values are 0
* if the fs and gs bases respectively are not overridden
* from the values implied by fsindex and gsindex. They
* are nonzero, and store the nonzero base addresses, if
* the bases are overridden.
*
* (fs != 0 && fsindex != 0) || (gs != 0 && gsindex != 0) should
* be impossible.
*
* Therefore we need to reload the segment registers if either
* the old or new selector is nonzero, and we need to override
* the base address if next thread expects it to be overridden.
*
* This code is unnecessarily slow in the case where the old and
* new indexes are zero and the new base is nonzero -- it will
* unnecessarily write 0 to the selector before writing the new
* base address.
*
* Note: This all depends on arch_prctl being the only way that
* user code can override the segment base. Once wrfsbase and
* wrgsbase are enabled, most of this code will need to change.
*/
if (unlikely(fsindex | next->fsindex | prev->fs)) {
loadsegment(fs, next->fsindex);
/*
* Check if the user used a selector != 0; if yes
* clear 64bit base, since overloaded base is always
* mapped to the Null selector
* If user code wrote a nonzero value to FS, then it also
* cleared the overridden base address.
*
* XXX: if user code wrote 0 to FS and cleared the base
* address itself, we won't notice and we'll incorrectly
* restore the prior base address next time we reschdule
* the process.
*/
if (fsindex)
prev->fs = 0;
}
/* when next process has a 64bit base use it */
if (next->fs)
wrmsrl(MSR_FS_BASE, next->fs);
prev->fsindex = fsindex;
if (unlikely(gsindex | next->gsindex | prev->gs)) {
load_gs_index(next->gsindex);
/* This works (and fails) the same way as fsindex above. */
if (gsindex)
prev->gs = 0;
}
+39
View File
@@ -27,6 +27,37 @@ static int get_free_idx(void)
return -ESRCH;
}
static bool tls_desc_okay(const struct user_desc *info)
{
if (LDT_empty(info))
return true;
/*
* espfix is required for 16-bit data segments, but espfix
* only works for LDT segments.
*/
if (!info->seg_32bit)
return false;
/* Only allow data segments in the TLS array. */
if (info->contents > 1)
return false;
/*
* Non-present segments with DPL 3 present an interesting attack
* surface. The kernel should handle such segments correctly,
* but TLS is very difficult to protect in a sandbox, so prevent
* such segments from being created.
*
* If userspace needs to remove a TLS entry, it can still delete
* it outright.
*/
if (info->seg_not_present)
return false;
return true;
}
static void set_tls_desc(struct task_struct *p, int idx,
const struct user_desc *info, int n)
{
@@ -66,6 +97,9 @@ int do_set_thread_area(struct task_struct *p, int idx,
if (copy_from_user(&info, u_info, sizeof(info)))
return -EFAULT;
if (!tls_desc_okay(&info))
return -EINVAL;
if (idx == -1)
idx = info.entry_number;
@@ -192,6 +226,7 @@ int regset_tls_set(struct task_struct *target, const struct user_regset *regset,
{
struct user_desc infobuf[GDT_ENTRY_TLS_ENTRIES];
const struct user_desc *info;
int i;
if (pos >= GDT_ENTRY_TLS_ENTRIES * sizeof(struct user_desc) ||
(pos % sizeof(struct user_desc)) != 0 ||
@@ -205,6 +240,10 @@ int regset_tls_set(struct task_struct *target, const struct user_regset *regset,
else
info = infobuf;
for (i = 0; i < count / sizeof(struct user_desc); i++)
if (!tls_desc_okay(info + i))
return -EINVAL;
set_tls_desc(target,
GDT_ENTRY_TLS_MIN + (pos / sizeof(struct user_desc)),
info, count / sizeof(struct user_desc));
+3 -2
View File
@@ -387,7 +387,7 @@ NOKPROBE_SYMBOL(do_int3);
* for scheduling or signal handling. The actual stack switch is done in
* entry.S
*/
asmlinkage __visible struct pt_regs *sync_regs(struct pt_regs *eregs)
asmlinkage __visible notrace struct pt_regs *sync_regs(struct pt_regs *eregs)
{
struct pt_regs *regs = eregs;
/* Did already sync */
@@ -413,7 +413,7 @@ struct bad_iret_stack {
struct pt_regs regs;
};
asmlinkage __visible
asmlinkage __visible notrace
struct bad_iret_stack *fixup_bad_iret(struct bad_iret_stack *s)
{
/*
@@ -436,6 +436,7 @@ struct bad_iret_stack *fixup_bad_iret(struct bad_iret_stack *s)
BUG_ON(!user_mode_vm(&new_stack->regs));
return new_stack;
}
NOKPROBE_SYMBOL(fixup_bad_iret);
#endif
/*
+3
View File
@@ -449,6 +449,9 @@ void af_alg_complete(struct crypto_async_request *req, int err)
{
struct af_alg_completion *completion = req->data;
if (err == -EINPROGRESS)
return;
completion->err = err;
complete(&completion->completion);
}
+4 -1
View File
@@ -462,7 +462,10 @@ static void __init arch_counter_register(unsigned type)
/* Register the CP15 based counter if we have one */
if (type & ARCH_CP15_TIMER) {
arch_timer_read_counter = arch_counter_get_cntvct;
if (arch_timer_use_virtual)
arch_timer_read_counter = arch_counter_get_cntvct;
else
arch_timer_read_counter = arch_counter_get_cntpct;
} else {
arch_timer_read_counter = arch_counter_get_cntvct_mem;
+3 -7
View File
@@ -259,16 +259,12 @@ void tegra_bo_free_object(struct drm_gem_object *gem)
int tegra_bo_dumb_create(struct drm_file *file, struct drm_device *drm,
struct drm_mode_create_dumb *args)
{
int min_pitch = DIV_ROUND_UP(args->width * args->bpp, 8);
unsigned int min_pitch = DIV_ROUND_UP(args->width * args->bpp, 8);
struct tegra_drm *tegra = drm->dev_private;
struct tegra_bo *bo;
min_pitch = round_up(min_pitch, tegra->pitch_align);
if (args->pitch < min_pitch)
args->pitch = min_pitch;
if (args->size < args->pitch * args->height)
args->size = args->pitch * args->height;
args->pitch = round_up(min_pitch, tegra->pitch_align);
args->size = args->pitch * args->height;
bo = tegra_bo_create_with_handle(file, drm, args->size, 0,
&args->handle);
+19 -1
View File
@@ -532,6 +532,19 @@ static void use_dmio(struct dm_buffer *b, int rw, sector_t block,
end_io(&b->bio, r);
}
static void inline_endio(struct bio *bio, int error)
{
bio_end_io_t *end_fn = bio->bi_private;
/*
* Reset the bio to free any attached resources
* (e.g. bio integrity profiles).
*/
bio_reset(bio);
end_fn(bio, error);
}
static void use_inline_bio(struct dm_buffer *b, int rw, sector_t block,
bio_end_io_t *end_io)
{
@@ -543,7 +556,12 @@ static void use_inline_bio(struct dm_buffer *b, int rw, sector_t block,
b->bio.bi_max_vecs = DM_BUFIO_INLINE_VECS;
b->bio.bi_iter.bi_sector = block << b->c->sectors_per_block_bits;
b->bio.bi_bdev = b->c->bdev;
b->bio.bi_end_io = end_io;
b->bio.bi_end_io = inline_endio;
/*
* Use of .bi_private isn't a problem here because
* the dm_buffer's inline bio is local to bufio.
*/
b->bio.bi_private = end_io;
/*
* We assume that if len >= PAGE_SIZE ptr is page-aligned.
+11 -6
View File
@@ -951,10 +951,14 @@ static void migration_success_post_commit(struct dm_cache_migration *mg)
}
} else {
clear_dirty(cache, mg->new_oblock, mg->cblock);
if (mg->requeue_holder)
if (mg->requeue_holder) {
clear_dirty(cache, mg->new_oblock, mg->cblock);
cell_defer(cache, mg->new_ocell, true);
else {
} else {
/*
* The block was promoted via an overwrite, so it's dirty.
*/
set_dirty(cache, mg->new_oblock, mg->cblock);
bio_endio(mg->new_ocell->holder, 0);
cell_defer(cache, mg->new_ocell, false);
}
@@ -1070,7 +1074,8 @@ static void issue_copy(struct dm_cache_migration *mg)
avoid = is_discarded_oblock(cache, mg->new_oblock);
if (!avoid && bio_writes_complete_block(cache, bio)) {
if (writeback_mode(&cache->features) &&
!avoid && bio_writes_complete_block(cache, bio)) {
issue_overwrite(mg, bio);
return;
}
@@ -2549,11 +2554,11 @@ static int __cache_map(struct cache *cache, struct bio *bio, struct dm_bio_priso
static int cache_map(struct dm_target *ti, struct bio *bio)
{
int r;
struct dm_bio_prison_cell *cell;
struct dm_bio_prison_cell *cell = NULL;
struct cache *cache = ti->private;
r = __cache_map(cache, bio, &cell);
if (r == DM_MAPIO_REMAPPED) {
if (r == DM_MAPIO_REMAPPED && cell) {
inc_ds(cache, bio, cell);
cell_defer(cache, cell, false);
}
+1 -1
View File
@@ -705,7 +705,7 @@ static int crypt_iv_tcw_whitening(struct crypt_config *cc,
for (i = 0; i < ((1 << SECTOR_SHIFT) / 8); i++)
crypto_xor(data + i * 8, buf, 8);
out:
memset(buf, 0, sizeof(buf));
memzero_explicit(buf, sizeof(buf));
return r;
}
+24 -6
View File
@@ -990,6 +990,24 @@ static void schedule_external_copy(struct thin_c *tc, dm_block_t virt_block,
schedule_zero(tc, virt_block, data_dest, cell, bio);
}
static void set_pool_mode(struct pool *pool, enum pool_mode new_mode);
static void check_for_space(struct pool *pool)
{
int r;
dm_block_t nr_free;
if (get_pool_mode(pool) != PM_OUT_OF_DATA_SPACE)
return;
r = dm_pool_get_free_block_count(pool->pmd, &nr_free);
if (r)
return;
if (nr_free)
set_pool_mode(pool, PM_WRITE);
}
/*
* A non-zero return indicates read_only or fail_io mode.
* Many callers don't care about the return value.
@@ -1004,6 +1022,8 @@ static int commit(struct pool *pool)
r = dm_pool_commit_metadata(pool->pmd);
if (r)
metadata_operation_failed(pool, "dm_pool_commit_metadata", r);
else
check_for_space(pool);
return r;
}
@@ -1022,8 +1042,6 @@ static void check_low_water_mark(struct pool *pool, dm_block_t free_blocks)
}
}
static void set_pool_mode(struct pool *pool, enum pool_mode new_mode);
static int alloc_data_block(struct thin_c *tc, dm_block_t *result)
{
int r;
@@ -1824,7 +1842,7 @@ static void set_pool_mode(struct pool *pool, enum pool_mode new_mode)
pool->process_bio = process_bio_read_only;
pool->process_discard = process_discard;
pool->process_prepared_mapping = process_prepared_mapping;
pool->process_prepared_discard = process_prepared_discard_passdown;
pool->process_prepared_discard = process_prepared_discard;
if (!pool->pf.error_if_no_space && no_space_timeout)
queue_delayed_work(pool->wq, &pool->no_space_timeout, no_space_timeout);
@@ -3248,14 +3266,14 @@ static void thin_dtr(struct dm_target *ti)
struct thin_c *tc = ti->private;
unsigned long flags;
thin_put(tc);
wait_for_completion(&tc->can_destroy);
spin_lock_irqsave(&tc->pool->lock, flags);
list_del_rcu(&tc->list);
spin_unlock_irqrestore(&tc->pool->lock, flags);
synchronize_rcu();
thin_put(tc);
wait_for_completion(&tc->can_destroy);
mutex_lock(&dm_thin_pool_table.mutex);
__pool_dec(tc->pool);
@@ -564,7 +564,9 @@ static int sm_bootstrap_get_nr_blocks(struct dm_space_map *sm, dm_block_t *count
{
struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
return smm->ll.nr_blocks;
*count = smm->ll.nr_blocks;
return 0;
}
static int sm_bootstrap_get_nr_free(struct dm_space_map *sm, dm_block_t *count)
+12 -1
View File
@@ -263,6 +263,17 @@ static int tc6393xb_ohci_disable(struct platform_device *dev)
return 0;
}
static int tc6393xb_ohci_suspend(struct platform_device *dev)
{
struct tc6393xb_platform_data *tcpd = dev_get_platdata(dev->dev.parent);
/* We can't properly store/restore OHCI state, so fail here */
if (tcpd->resume_restore)
return -EBUSY;
return tc6393xb_ohci_disable(dev);
}
static int tc6393xb_fb_enable(struct platform_device *dev)
{
struct tc6393xb *tc6393xb = dev_get_drvdata(dev->dev.parent);
@@ -403,7 +414,7 @@ static struct mfd_cell tc6393xb_cells[] = {
.num_resources = ARRAY_SIZE(tc6393xb_ohci_resources),
.resources = tc6393xb_ohci_resources,
.enable = tc6393xb_ohci_enable,
.suspend = tc6393xb_ohci_disable,
.suspend = tc6393xb_ohci_suspend,
.resume = tc6393xb_ohci_enable,
.disable = tc6393xb_ohci_disable,
},
+3
View File
@@ -830,6 +830,9 @@ static struct twl4030_power_data osc_off_idle = {
};
static struct of_device_id twl4030_power_of_match[] = {
{
.compatible = "ti,twl4030-power",
},
{
.compatible = "ti,twl4030-power-reset",
.data = &omap3_reset,
+1 -1
View File
@@ -260,7 +260,7 @@ static ssize_t force_ro_show(struct device *dev, struct device_attribute *attr,
int ret;
struct mmc_blk_data *md = mmc_blk_get(dev_to_disk(dev));
ret = snprintf(buf, PAGE_SIZE, "%d",
ret = snprintf(buf, PAGE_SIZE, "%d\n",
get_disk_ro(dev_to_disk(dev)) ^
md->read_only);
mmc_blk_put(md);
+7
View File
@@ -626,6 +626,13 @@ static void dw_mci_ctrl_rd_thld(struct dw_mci *host, struct mmc_data *data)
WARN_ON(!(data->flags & MMC_DATA_READ));
/*
* CDTHRCTL doesn't exist prior to 240A (in fact that register offset is
* in the FIFO region, so we really shouldn't access it).
*/
if (host->verid < DW_MMC_240A)
return;
if (host->timing != MMC_TIMING_MMC_HS200 &&
host->timing != MMC_TIMING_UHS_SDR104)
goto disable;
+3 -1
View File
@@ -609,6 +609,7 @@ static void omap_hsmmc_set_clock(struct omap_hsmmc_host *host)
*/
if ((mmc_slot(host).features & HSMMC_HAS_HSPE_SUPPORT) &&
(ios->timing != MMC_TIMING_MMC_DDR52) &&
(ios->timing != MMC_TIMING_UHS_DDR50) &&
((OMAP_HSMMC_READ(host->base, CAPA) & HSS) == HSS)) {
regval = OMAP_HSMMC_READ(host->base, HCTL);
if (clkdiv && (clk_get_rate(host->fclk)/clkdiv) > 25000000)
@@ -628,7 +629,8 @@ static void omap_hsmmc_set_bus_width(struct omap_hsmmc_host *host)
u32 con;
con = OMAP_HSMMC_READ(host->base, CON);
if (ios->timing == MMC_TIMING_MMC_DDR52)
if (ios->timing == MMC_TIMING_MMC_DDR52 ||
ios->timing == MMC_TIMING_UHS_DDR50)
con |= DDR; /* configure in DDR mode */
else
con &= ~DDR;
-2
View File
@@ -127,8 +127,6 @@ void sdhci_pci_o2_fujin2_pci_init(struct sdhci_pci_chip *chip)
return;
scratch_32 &= ~((1 << 21) | (1 << 30));
/* Set RTD3 function disabled */
scratch_32 |= ((1 << 29) | (1 << 28));
pci_write_config_dword(chip->pdev, O2_SD_FUNC_REG3, scratch_32);
/* Set L1 Entrance Timer */
+3 -2
View File
@@ -216,7 +216,7 @@
/* Various constants */
/* Coalescing */
#define MVNETA_TXDONE_COAL_PKTS 16
#define MVNETA_TXDONE_COAL_PKTS 1
#define MVNETA_RX_COAL_PKTS 32
#define MVNETA_RX_COAL_USEC 100
@@ -1721,6 +1721,7 @@ static int mvneta_tx(struct sk_buff *skb, struct net_device *dev)
u16 txq_id = skb_get_queue_mapping(skb);
struct mvneta_tx_queue *txq = &pp->txqs[txq_id];
struct mvneta_tx_desc *tx_desc;
int len = skb->len;
int frags = 0;
u32 tx_cmd;
@@ -1788,7 +1789,7 @@ out:
u64_stats_update_begin(&stats->syncp);
stats->tx_packets++;
stats->tx_bytes += skb->len;
stats->tx_bytes += len;
u64_stats_update_end(&stats->syncp);
} else {
dev->stats.tx_dropped++;
+3 -7
View File
@@ -1995,9 +1995,8 @@ static int vxlan_init(struct net_device *dev)
spin_lock(&vn->sock_lock);
vs = vxlan_find_sock(vxlan->net, ipv6 ? AF_INET6 : AF_INET,
vxlan->dst_port);
if (vs) {
if (vs && atomic_add_unless(&vs->refcnt, 1, 0)) {
/* If we have a socket with same port already, reuse it */
atomic_inc(&vs->refcnt);
vxlan_vs_add_dev(vs, vxlan);
} else {
/* otherwise make new socket outside of RTNL */
@@ -2396,12 +2395,9 @@ struct vxlan_sock *vxlan_sock_add(struct net *net, __be16 port,
spin_lock(&vn->sock_lock);
vs = vxlan_find_sock(net, ipv6 ? AF_INET6 : AF_INET, port);
if (vs) {
if (vs->rcv == rcv)
atomic_inc(&vs->refcnt);
else
if (vs && ((vs->rcv != rcv) ||
!atomic_add_unless(&vs->refcnt, 1, 0)))
vs = ERR_PTR(-EBUSY);
}
spin_unlock(&vn->sock_lock);
if (!vs)
@@ -1355,6 +1355,7 @@ int brcmf_proto_msgbuf_attach(struct brcmf_pub *drvr)
}
INIT_WORK(&msgbuf->txflow_work, brcmf_msgbuf_txflow_worker);
count = BITS_TO_LONGS(if_msgbuf->nrof_flowrings);
count = count * sizeof(unsigned long);
msgbuf->flow_map = kzalloc(count, GFP_KERNEL);
if (!msgbuf->flow_map)
goto fail;
+2 -1
View File
@@ -1287,6 +1287,7 @@ void rtl92ce_enable_interrupt(struct ieee80211_hw *hw)
rtl_write_dword(rtlpriv, REG_HIMR, rtlpci->irq_mask[0] & 0xFFFFFFFF);
rtl_write_dword(rtlpriv, REG_HIMRE, rtlpci->irq_mask[1] & 0xFFFFFFFF);
rtlpci->irq_enabled = true;
}
void rtl92ce_disable_interrupt(struct ieee80211_hw *hw)
@@ -1296,7 +1297,7 @@ void rtl92ce_disable_interrupt(struct ieee80211_hw *hw)
rtl_write_dword(rtlpriv, REG_HIMR, IMR8190_DISABLED);
rtl_write_dword(rtlpriv, REG_HIMRE, IMR8190_DISABLED);
synchronize_irq(rtlpci->pdev->irq);
rtlpci->irq_enabled = false;
}
static void _rtl92ce_poweroff_adapter(struct ieee80211_hw *hw)
@@ -228,6 +228,7 @@ static struct rtl_hal_ops rtl8192ce_hal_ops = {
.led_control = rtl92ce_led_control,
.set_desc = rtl92ce_set_desc,
.get_desc = rtl92ce_get_desc,
.is_tx_desc_closed = rtl92ce_is_tx_desc_closed,
.tx_polling = rtl92ce_tx_polling,
.enable_hw_sec = rtl92ce_enable_hw_security_config,
.set_key = rtl92ce_set_key,
@@ -271,6 +272,8 @@ static struct rtl_hal_cfg rtl92ce_hal_cfg = {
.maps[MAC_RCR_ACRC32] = ACRC32,
.maps[MAC_RCR_ACF] = ACF,
.maps[MAC_RCR_AAP] = AAP,
.maps[MAC_HIMR] = REG_HIMR,
.maps[MAC_HIMRE] = REG_HIMRE,
.maps[EFUSE_TEST] = REG_EFUSE_TEST,
.maps[EFUSE_CTRL] = REG_EFUSE_CTRL,
+20 -4
View File
@@ -720,16 +720,15 @@ u32 rtl92ce_get_desc(u8 *p_desc, bool istx, u8 desc_name)
break;
}
} else {
struct rx_desc_92c *pdesc = (struct rx_desc_92c *)p_desc;
switch (desc_name) {
case HW_DESC_OWN:
ret = GET_RX_DESC_OWN(pdesc);
ret = GET_RX_DESC_OWN(p_desc);
break;
case HW_DESC_RXPKT_LEN:
ret = GET_RX_DESC_PKT_LEN(pdesc);
ret = GET_RX_DESC_PKT_LEN(p_desc);
break;
case HW_DESC_RXBUFF_ADDR:
ret = GET_RX_STATUS_DESC_BUFF_ADDR(pdesc);
ret = GET_RX_DESC_BUFF_ADDR(p_desc);
break;
default:
RT_ASSERT(false, "ERR rxdesc :%d not process\n",
@@ -740,6 +739,23 @@ u32 rtl92ce_get_desc(u8 *p_desc, bool istx, u8 desc_name)
return ret;
}
bool rtl92ce_is_tx_desc_closed(struct ieee80211_hw *hw,
u8 hw_queue, u16 index)
{
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
struct rtl8192_tx_ring *ring = &rtlpci->tx_ring[hw_queue];
u8 *entry = (u8 *)(&ring->desc[ring->idx]);
u8 own = (u8)rtl92ce_get_desc(entry, true, HW_DESC_OWN);
/*beacon packet will only use the first
*descriptor defautly,and the own may not
*be cleared by the hardware
*/
if (own)
return false;
return true;
}
void rtl92ce_tx_polling(struct ieee80211_hw *hw, u8 hw_queue)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
@@ -723,6 +723,8 @@ bool rtl92ce_rx_query_desc(struct ieee80211_hw *hw,
void rtl92ce_set_desc(struct ieee80211_hw *hw, u8 *pdesc, bool istx,
u8 desc_name, u8 *val);
u32 rtl92ce_get_desc(u8 *pdesc, bool istx, u8 desc_name);
bool rtl92ce_is_tx_desc_closed(struct ieee80211_hw *hw,
u8 hw_queue, u16 index);
void rtl92ce_tx_polling(struct ieee80211_hw *hw, u8 hw_queue);
void rtl92ce_tx_fill_cmddesc(struct ieee80211_hw *hw, u8 *pdesc,
bool b_firstseg, bool b_lastseg,
+3
View File
@@ -627,6 +627,9 @@ static int xennet_start_xmit(struct sk_buff *skb, struct net_device *dev)
slots, skb->len);
if (skb_linearize(skb))
goto drop;
data = skb->data;
offset = offset_in_page(data);
len = skb_headlen(skb);
}
spin_lock_irqsave(&queue->tx_lock, flags);
+8
View File
@@ -283,6 +283,14 @@ static int anatop_regulator_probe(struct platform_device *pdev)
sreg->sel = 0;
sreg->bypass = true;
}
/*
* In case vddpu was disabled by the bootloader, we need to set
* a sane default until imx6-cpufreq was probed and changes the
* voltage to the correct value. In this case we set 1.25V.
*/
if (!sreg->sel && !strcmp(sreg->name, "vddpu"))
sreg->sel = 22;
} else {
rdesc->ops = &anatop_rops;
}
+6 -6
View File
@@ -2647,14 +2647,14 @@ static void NCR5380_dma_complete(NCR5380_instance * instance) {
*
* Purpose : abort a command
*
* Inputs : cmd - the Scsi_Cmnd to abort, code - code to set the
* host byte of the result field to, if zero DID_ABORTED is
* Inputs : cmd - the Scsi_Cmnd to abort, code - code to set the
* host byte of the result field to, if zero DID_ABORTED is
* used.
*
* Returns : 0 - success, -1 on failure.
* Returns : SUCCESS - success, FAILED on failure.
*
* XXX - there is no way to abort the command that is currently
* connected, you have to wait for it to complete. If this is
* XXX - there is no way to abort the command that is currently
* connected, you have to wait for it to complete. If this is
* a problem, we could implement longjmp() / setjmp(), setjmp()
* called where the loop started in NCR5380_main().
*
@@ -2704,7 +2704,7 @@ static int NCR5380_abort(Scsi_Cmnd * cmd) {
* aborted flag and get back into our main loop.
*/
return 0;
return SUCCESS;
}
#endif
+1 -1
View File
@@ -531,7 +531,7 @@ static int aha1740_eh_abort_handler (Scsi_Cmnd *dummy)
* quiet as possible...
*/
return 0;
return SUCCESS;
}
static struct scsi_host_template aha1740_template = {
+1 -1
View File
@@ -2607,7 +2607,7 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
* host byte of the result field to, if zero DID_ABORTED is
* used.
*
* Returns : 0 - success, -1 on failure.
* Returns : SUCCESS - success, FAILED on failure.
*
* XXX - there is no way to abort the command that is currently
* connected, you have to wait for it to complete. If this is
+1 -1
View File
@@ -1057,7 +1057,7 @@ int esas2r_eh_abort(struct scsi_cmnd *cmd)
cmd->scsi_done(cmd);
return 0;
return SUCCESS;
}
spin_lock_irqsave(&a->queue_lock, flags);
+4 -4
View File
@@ -1945,7 +1945,7 @@ megaraid_abort_and_reset(adapter_t *adapter, Scsi_Cmnd *cmd, int aor)
cmd->device->id, (u32)cmd->device->lun);
if(list_empty(&adapter->pending_list))
return FALSE;
return FAILED;
list_for_each_safe(pos, next, &adapter->pending_list) {
@@ -1968,7 +1968,7 @@ megaraid_abort_and_reset(adapter_t *adapter, Scsi_Cmnd *cmd, int aor)
(aor==SCB_ABORT) ? "ABORTING":"RESET",
scb->idx);
return FALSE;
return FAILED;
}
else {
@@ -1993,12 +1993,12 @@ megaraid_abort_and_reset(adapter_t *adapter, Scsi_Cmnd *cmd, int aor)
list_add_tail(SCSI_LIST(cmd),
&adapter->completed_list);
return TRUE;
return SUCCESS;
}
}
}
return FALSE;
return FAILED;
}
static inline int
+1 -1
View File
@@ -1008,7 +1008,7 @@ megasas_issue_blocked_abort_cmd(struct megasas_instance *instance,
cpu_to_le32(upper_32_bits(cmd_to_abort->frame_phys_addr));
cmd->sync_cmd = 1;
cmd->cmd_status = 0xFF;
cmd->cmd_status = ENODATA;
instance->instancet->issue_dcmd(instance, cmd);
+9 -8
View File
@@ -183,14 +183,15 @@ void MR_PopulateDrvRaidMap(struct megasas_instance *instance)
/* New Raid map will not set totalSize, so keep expected value
* for legacy code in ValidateMapInfo
*/
pDrvRaidMap->totalSize = sizeof(struct MR_FW_RAID_MAP_EXT);
pDrvRaidMap->totalSize =
cpu_to_le32(sizeof(struct MR_FW_RAID_MAP_EXT));
} else {
fw_map_old = (struct MR_FW_RAID_MAP_ALL *)
fusion->ld_map[(instance->map_id & 1)];
pFwRaidMap = &fw_map_old->raidMap;
#if VD_EXT_DEBUG
for (i = 0; i < pFwRaidMap->ldCount; i++) {
for (i = 0; i < le16_to_cpu(pFwRaidMap->ldCount); i++) {
dev_dbg(&instance->pdev->dev, "(%d) :Index 0x%x "
"Target Id 0x%x Seq Num 0x%x Size 0/%llx\n",
instance->unique_id, i,
@@ -202,12 +203,12 @@ void MR_PopulateDrvRaidMap(struct megasas_instance *instance)
memset(drv_map, 0, fusion->drv_map_sz);
pDrvRaidMap->totalSize = pFwRaidMap->totalSize;
pDrvRaidMap->ldCount = pFwRaidMap->ldCount;
pDrvRaidMap->ldCount = (__le16)pFwRaidMap->ldCount;
pDrvRaidMap->fpPdIoTimeoutSec = pFwRaidMap->fpPdIoTimeoutSec;
for (i = 0; i < MAX_RAIDMAP_LOGICAL_DRIVES + MAX_RAIDMAP_VIEWS; i++)
pDrvRaidMap->ldTgtIdToLd[i] =
(u8)pFwRaidMap->ldTgtIdToLd[i];
for (i = 0; i < pDrvRaidMap->ldCount; i++) {
for (i = 0; i < le16_to_cpu(pDrvRaidMap->ldCount); i++) {
pDrvRaidMap->ldSpanMap[i] = pFwRaidMap->ldSpanMap[i];
#if VD_EXT_DEBUG
dev_dbg(&instance->pdev->dev,
@@ -268,7 +269,7 @@ u8 MR_ValidateMapInfo(struct megasas_instance *instance)
else
expected_size =
(sizeof(struct MR_FW_RAID_MAP) - sizeof(struct MR_LD_SPAN_MAP) +
(sizeof(struct MR_LD_SPAN_MAP) * le32_to_cpu(pDrvRaidMap->ldCount)));
(sizeof(struct MR_LD_SPAN_MAP) * le16_to_cpu(pDrvRaidMap->ldCount)));
if (le32_to_cpu(pDrvRaidMap->totalSize) != expected_size) {
dev_err(&instance->pdev->dev, "map info structure size 0x%x is not matching with ld count\n",
@@ -284,7 +285,7 @@ u8 MR_ValidateMapInfo(struct megasas_instance *instance)
mr_update_load_balance_params(drv_map, lbInfo);
num_lds = le32_to_cpu(drv_map->raidMap.ldCount);
num_lds = le16_to_cpu(drv_map->raidMap.ldCount);
/*Convert Raid capability values to CPU arch */
for (ldCount = 0; ldCount < num_lds; ldCount++) {
@@ -457,7 +458,7 @@ u32 mr_spanset_get_span_block(struct megasas_instance *instance,
quad = &map->raidMap.ldSpanMap[ld].
spanBlock[span].
block_span_info.quad[info];
if (le32_to_cpu(quad->diff == 0))
if (le32_to_cpu(quad->diff) == 0)
return SPAN_INVALID;
if (le64_to_cpu(quad->logStart) <= row &&
row <= le64_to_cpu(quad->logEnd) &&
@@ -520,7 +521,7 @@ static u64 get_row_from_strip(struct megasas_instance *instance,
span_set->span_row_data_width) * span_set->diff;
for (span = 0, span_offset = 0; span < raid->spanDepth; span++)
if (le32_to_cpu(map->raidMap.ldSpanMap[ld].spanBlock[span].
block_span_info.noElements >= info+1)) {
block_span_info.noElements) >= info+1) {
if (strip_offset >=
span_set->strip_offset[span])
span_offset++;
+7 -6
View File
@@ -880,7 +880,7 @@ megasas_sync_map_info(struct megasas_instance *instance)
map = fusion->ld_drv_map[instance->map_id & 1];
num_lds = le32_to_cpu(map->raidMap.ldCount);
num_lds = le16_to_cpu(map->raidMap.ldCount);
dcmd = &cmd->frame->dcmd;
@@ -1173,9 +1173,10 @@ megasas_fire_cmd_fusion(struct megasas_instance *instance,
struct megasas_register_set __iomem *regs)
{
#if defined(writeq) && defined(CONFIG_64BIT)
u64 req_data = (((u64)req_desc_hi << 32) | (u32)req_desc_lo);
u64 req_data = (((u64)le32_to_cpu(req_desc_hi) << 32) |
le32_to_cpu(req_desc_lo));
writeq(le64_to_cpu(req_data), &(regs)->inbound_low_queue_port);
writeq(req_data, &(regs)->inbound_low_queue_port);
#else
unsigned long flags;
@@ -1373,7 +1374,7 @@ megasas_set_pd_lba(struct MPI2_RAID_SCSI_IO_REQUEST *io_request, u8 cdb_len,
/* Logical block reference tag */
io_request->CDB.EEDP32.PrimaryReferenceTag =
cpu_to_be32(ref_tag);
io_request->CDB.EEDP32.PrimaryApplicationTagMask = 0xffff;
io_request->CDB.EEDP32.PrimaryApplicationTagMask = cpu_to_be16(0xffff);
io_request->IoFlags = cpu_to_le16(32); /* Specify 32-byte cdb */
/* Transfer length */
@@ -1769,7 +1770,7 @@ megasas_build_dcdb_fusion(struct megasas_instance *instance,
/* set RAID context values */
pRAID_Context->regLockFlags = REGION_TYPE_SHARED_READ;
pRAID_Context->timeoutValue = raid->fpIoTimeoutForLd;
pRAID_Context->timeoutValue = cpu_to_le16(raid->fpIoTimeoutForLd);
pRAID_Context->VirtualDiskTgtId = cpu_to_le16(device_id);
pRAID_Context->regLockRowLBA = 0;
pRAID_Context->regLockLength = 0;
@@ -2254,7 +2255,7 @@ build_mpt_mfi_pass_thru(struct megasas_instance *instance,
* megasas_complete_cmd
*/
if (frame_hdr->flags & MFI_FRAME_DONT_POST_IN_REPLY_QUEUE)
if (frame_hdr->flags & cpu_to_le16(MFI_FRAME_DONT_POST_IN_REPLY_QUEUE))
cmd->flags = MFI_FRAME_DONT_POST_IN_REPLY_QUEUE;
fusion = instance->ctrl_context;
+5 -5
View File
@@ -2590,15 +2590,15 @@ static void NCR5380_reselect (struct Scsi_Host *instance)
* Purpose : abort a command
*
* Inputs : cmd - the struct scsi_cmnd to abort, code - code to set the
* host byte of the result field to, if zero DID_ABORTED is
* host byte of the result field to, if zero DID_ABORTED is
* used.
*
* Returns : 0 - success, -1 on failure.
* Returns : SUCCESS - success, FAILED on failure.
*
* XXX - there is no way to abort the command that is currently
* connected, you have to wait for it to complete. If this is
* XXX - there is no way to abort the command that is currently
* connected, you have to wait for it to complete. If this is
* a problem, we could implement longjmp() / setjmp(), setjmp()
* called where the loop started in NCR5380_main().
* called where the loop started in NCR5380_main().
*/
static int NCR5380_abort(struct scsi_cmnd *cmd)
+1 -1
View File
@@ -258,7 +258,7 @@ void ll_invalidate_aliases(struct inode *inode)
inode->i_ino, inode->i_generation, inode);
ll_lock_dcache(inode);
ll_d_hlist_for_each_entry(dentry, p, &inode->i_dentry, d_alias) {
ll_d_hlist_for_each_entry(dentry, p, &inode->i_dentry, d_u.d_alias) {
CDEBUG(D_DENTRY, "dentry in drop %.*s (%p) parent %p "
"inode %p flags %d\n", dentry->d_name.len,
dentry->d_name.name, dentry, dentry->d_parent,
@@ -711,7 +711,7 @@ void lustre_dump_dentry(struct dentry *dentry, int recur)
return;
list_for_each(tmp, &dentry->d_subdirs) {
struct dentry *d = list_entry(tmp, struct dentry, d_u.d_child);
struct dentry *d = list_entry(tmp, struct dentry, d_child);
lustre_dump_dentry(d, recur - 1);
}
}
+4 -4
View File
@@ -167,14 +167,14 @@ static void ll_invalidate_negative_children(struct inode *dir)
struct ll_d_hlist_node *p;
ll_lock_dcache(dir);
ll_d_hlist_for_each_entry(dentry, p, &dir->i_dentry, d_alias) {
ll_d_hlist_for_each_entry(dentry, p, &dir->i_dentry, d_u.d_alias) {
spin_lock(&dentry->d_lock);
if (!list_empty(&dentry->d_subdirs)) {
struct dentry *child;
list_for_each_entry_safe(child, tmp_subdir,
&dentry->d_subdirs,
d_u.d_child) {
d_child) {
if (child->d_inode == NULL)
d_lustre_invalidate(child, 1);
}
@@ -362,7 +362,7 @@ static struct dentry *ll_find_alias(struct inode *inode, struct dentry *dentry)
discon_alias = invalid_alias = NULL;
ll_lock_dcache(inode);
ll_d_hlist_for_each_entry(alias, p, &inode->i_dentry, d_alias) {
ll_d_hlist_for_each_entry(alias, p, &inode->i_dentry, d_u.d_alias) {
LASSERT(alias != dentry);
spin_lock(&alias->d_lock);
@@ -953,7 +953,7 @@ static void ll_get_child_fid(struct inode * dir, struct qstr *name,
{
struct dentry *parent, *child;
parent = ll_d_hlist_entry(dir->i_dentry, struct dentry, d_alias);
parent = ll_d_hlist_entry(dir->i_dentry, struct dentry, d_u.d_alias);
child = d_lookup(parent, name);
if (child) {
if (child->d_inode)
+2 -2
View File
@@ -1835,10 +1835,10 @@ static int __init thermal_init(void)
exit_netlink:
genetlink_exit();
unregister_governors:
thermal_unregister_governors();
unregister_class:
class_unregister(&thermal_class);
unregister_governors:
thermal_unregister_governors();
error:
idr_destroy(&thermal_tz_idr);
idr_destroy(&thermal_cdev_idr);
+1 -1
View File
@@ -125,7 +125,7 @@ affs_fix_dcache(struct inode *inode, u32 entry_ino)
{
struct dentry *dentry;
spin_lock(&inode->i_lock);
hlist_for_each_entry(dentry, &inode->i_dentry, d_alias) {
hlist_for_each_entry(dentry, &inode->i_dentry, d_u.d_alias) {
if (entry_ino == (u32)(long)dentry->d_fsdata) {
dentry->d_fsdata = (void *)inode->i_ino;
break;
+6 -6
View File
@@ -85,7 +85,7 @@ static struct dentry *get_next_positive_subdir(struct dentry *prev,
spin_lock(&root->d_lock);
if (prev)
next = prev->d_u.d_child.next;
next = prev->d_child.next;
else {
prev = dget_dlock(root);
next = prev->d_subdirs.next;
@@ -99,13 +99,13 @@ cont:
return NULL;
}
q = list_entry(next, struct dentry, d_u.d_child);
q = list_entry(next, struct dentry, d_child);
spin_lock_nested(&q->d_lock, DENTRY_D_LOCK_NESTED);
/* Already gone or negative dentry (under construction) - try next */
if (!d_count(q) || !simple_positive(q)) {
spin_unlock(&q->d_lock);
next = q->d_u.d_child.next;
next = q->d_child.next;
goto cont;
}
dget_dlock(q);
@@ -155,13 +155,13 @@ again:
goto relock;
}
spin_unlock(&p->d_lock);
next = p->d_u.d_child.next;
next = p->d_child.next;
p = parent;
if (next != &parent->d_subdirs)
break;
}
}
ret = list_entry(next, struct dentry, d_u.d_child);
ret = list_entry(next, struct dentry, d_child);
spin_lock_nested(&ret->d_lock, DENTRY_D_LOCK_NESTED);
/* Negative dentry - try next */
@@ -489,7 +489,7 @@ found:
spin_lock(&sbi->lookup_lock);
spin_lock(&expired->d_parent->d_lock);
spin_lock_nested(&expired->d_lock, DENTRY_D_LOCK_NESTED);
list_move(&expired->d_parent->d_subdirs, &expired->d_u.d_child);
list_move(&expired->d_parent->d_subdirs, &expired->d_child);
spin_unlock(&expired->d_lock);
spin_unlock(&expired->d_parent->d_lock);
spin_unlock(&sbi->lookup_lock);
+1 -1
View File
@@ -687,7 +687,7 @@ static void autofs_clear_leaf_automount_flags(struct dentry *dentry)
/* only consider parents below dentrys in the root */
if (IS_ROOT(parent->d_parent))
return;
d_child = &dentry->d_u.d_child;
d_child = &dentry->d_child;
/* Set parent managed if it's becoming empty */
if (d_child->next == &parent->d_subdirs &&
d_child->prev == &parent->d_subdirs)
+20 -6
View File
@@ -4106,12 +4106,6 @@ again:
if (ret)
break;
/* opt_discard */
if (btrfs_test_opt(root, DISCARD))
ret = btrfs_error_discard_extent(root, start,
end + 1 - start,
NULL);
clear_extent_dirty(unpin, start, end, GFP_NOFS);
btrfs_error_unpin_extent_range(root, start, end);
cond_resched();
@@ -4129,6 +4123,25 @@ again:
return 0;
}
static void btrfs_free_pending_ordered(struct btrfs_transaction *cur_trans,
struct btrfs_fs_info *fs_info)
{
struct btrfs_ordered_extent *ordered;
spin_lock(&fs_info->trans_lock);
while (!list_empty(&cur_trans->pending_ordered)) {
ordered = list_first_entry(&cur_trans->pending_ordered,
struct btrfs_ordered_extent,
trans_list);
list_del_init(&ordered->trans_list);
spin_unlock(&fs_info->trans_lock);
btrfs_put_ordered_extent(ordered);
spin_lock(&fs_info->trans_lock);
}
spin_unlock(&fs_info->trans_lock);
}
void btrfs_cleanup_one_transaction(struct btrfs_transaction *cur_trans,
struct btrfs_root *root)
{
@@ -4140,6 +4153,7 @@ void btrfs_cleanup_one_transaction(struct btrfs_transaction *cur_trans,
cur_trans->state = TRANS_STATE_UNBLOCKED;
wake_up(&root->fs_info->transaction_wait);
btrfs_free_pending_ordered(cur_trans, root->fs_info);
btrfs_destroy_delayed_inodes(root);
btrfs_assert_delayed_root_empty(root);
+6 -4
View File
@@ -5715,7 +5715,8 @@ void btrfs_prepare_extent_commit(struct btrfs_trans_handle *trans,
update_global_block_rsv(fs_info);
}
static int unpin_extent_range(struct btrfs_root *root, u64 start, u64 end)
static int unpin_extent_range(struct btrfs_root *root, u64 start, u64 end,
const bool return_free_space)
{
struct btrfs_fs_info *fs_info = root->fs_info;
struct btrfs_block_group_cache *cache = NULL;
@@ -5739,7 +5740,8 @@ static int unpin_extent_range(struct btrfs_root *root, u64 start, u64 end)
if (start < cache->last_byte_to_unpin) {
len = min(len, cache->last_byte_to_unpin - start);
btrfs_add_free_space(cache, start, len);
if (return_free_space)
btrfs_add_free_space(cache, start, len);
}
start += len;
@@ -5803,7 +5805,7 @@ int btrfs_finish_extent_commit(struct btrfs_trans_handle *trans,
end + 1 - start, NULL);
clear_extent_dirty(unpin, start, end, GFP_NOFS);
unpin_extent_range(root, start, end);
unpin_extent_range(root, start, end, true);
cond_resched();
}
@@ -9585,7 +9587,7 @@ out:
int btrfs_error_unpin_extent_range(struct btrfs_root *root, u64 start, u64 end)
{
return unpin_extent_range(root, start, end);
return unpin_extent_range(root, start, end, false);
}
int btrfs_error_discard_extent(struct btrfs_root *root, u64 bytenr,
-2
View File
@@ -287,8 +287,6 @@ int unpin_extent_cache(struct extent_map_tree *tree, u64 start, u64 len,
if (!em)
goto out;
if (!test_bit(EXTENT_FLAG_LOGGING, &em->flags))
list_move(&em->list, &tree->modified_extents);
em->generation = gen;
clear_bit(EXTENT_FLAG_PINNED, &em->flags);
em->mod_start = em->start;
+7 -2
View File
@@ -220,6 +220,7 @@ static int __btrfs_add_ordered_extent(struct inode *inode, u64 file_offset,
INIT_LIST_HEAD(&entry->work_list);
init_completion(&entry->completion);
INIT_LIST_HEAD(&entry->log_list);
INIT_LIST_HEAD(&entry->trans_list);
trace_btrfs_ordered_extent_add(inode, entry);
@@ -443,6 +444,8 @@ void btrfs_get_logged_extents(struct inode *inode,
ordered = rb_entry(n, struct btrfs_ordered_extent, rb_node);
if (!list_empty(&ordered->log_list))
continue;
if (test_bit(BTRFS_ORDERED_LOGGED, &ordered->flags))
continue;
list_add_tail(&ordered->log_list, logged_list);
atomic_inc(&ordered->refs);
}
@@ -472,7 +475,8 @@ void btrfs_submit_logged_extents(struct list_head *logged_list,
spin_unlock_irq(&log->log_extents_lock[index]);
}
void btrfs_wait_logged_extents(struct btrfs_root *log, u64 transid)
void btrfs_wait_logged_extents(struct btrfs_trans_handle *trans,
struct btrfs_root *log, u64 transid)
{
struct btrfs_ordered_extent *ordered;
int index = transid % 2;
@@ -497,7 +501,8 @@ void btrfs_wait_logged_extents(struct btrfs_root *log, u64 transid)
wait_event(ordered->wait, test_bit(BTRFS_ORDERED_IO_DONE,
&ordered->flags));
btrfs_put_ordered_extent(ordered);
if (!test_and_set_bit(BTRFS_ORDERED_LOGGED, &ordered->flags))
list_add_tail(&ordered->trans_list, &trans->ordered);
spin_lock_irq(&log->log_extents_lock[index]);
}
spin_unlock_irq(&log->log_extents_lock[index]);
+7 -1
View File
@@ -71,6 +71,8 @@ struct btrfs_ordered_sum {
ordered extent */
#define BTRFS_ORDERED_TRUNCATED 9 /* Set when we have to truncate an extent */
#define BTRFS_ORDERED_LOGGED 10 /* Set when we've waited on this ordered extent
* in the logging code. */
struct btrfs_ordered_extent {
/* logical offset in the file */
u64 file_offset;
@@ -121,6 +123,9 @@ struct btrfs_ordered_extent {
/* If we need to wait on this to be done */
struct list_head log_list;
/* If the transaction needs to wait on this ordered extent */
struct list_head trans_list;
/* used to wait for the BTRFS_ORDERED_COMPLETE bit */
wait_queue_head_t wait;
@@ -197,7 +202,8 @@ void btrfs_get_logged_extents(struct inode *inode,
void btrfs_put_logged_extents(struct list_head *logged_list);
void btrfs_submit_logged_extents(struct list_head *logged_list,
struct btrfs_root *log);
void btrfs_wait_logged_extents(struct btrfs_root *log, u64 transid);
void btrfs_wait_logged_extents(struct btrfs_trans_handle *trans,
struct btrfs_root *log, u64 transid);
void btrfs_free_logged_extents(struct btrfs_root *log, u64 transid);
int __init ordered_data_init(void);
void ordered_data_exit(void);
+1 -1
View File
@@ -1824,7 +1824,7 @@ static int btrfs_statfs(struct dentry *dentry, struct kstatfs *buf)
buf->f_bfree -= block_rsv->size >> bits;
spin_unlock(&block_rsv->lock);
buf->f_bavail = total_free_data;
buf->f_bavail = div_u64(total_free_data, factor);
ret = btrfs_calc_avail_data_space(fs_info->tree_root, &total_free_data);
if (ret) {
mutex_unlock(&fs_info->chunk_mutex);
+33
View File
@@ -220,6 +220,7 @@ loop:
INIT_LIST_HEAD(&cur_trans->pending_snapshots);
INIT_LIST_HEAD(&cur_trans->pending_chunks);
INIT_LIST_HEAD(&cur_trans->switch_commits);
INIT_LIST_HEAD(&cur_trans->pending_ordered);
list_add_tail(&cur_trans->list, &fs_info->trans_list);
extent_io_tree_init(&cur_trans->dirty_pages,
fs_info->btree_inode->i_mapping);
@@ -488,6 +489,7 @@ again:
h->sync = false;
INIT_LIST_HEAD(&h->qgroup_ref_list);
INIT_LIST_HEAD(&h->new_bgs);
INIT_LIST_HEAD(&h->ordered);
smp_mb();
if (cur_trans->state >= TRANS_STATE_BLOCKED &&
@@ -719,6 +721,12 @@ static int __btrfs_end_transaction(struct btrfs_trans_handle *trans,
if (!list_empty(&trans->new_bgs))
btrfs_create_pending_block_groups(trans, root);
if (!list_empty(&trans->ordered)) {
spin_lock(&info->trans_lock);
list_splice(&trans->ordered, &cur_trans->pending_ordered);
spin_unlock(&info->trans_lock);
}
trans->delayed_ref_updates = 0;
if (!trans->sync) {
must_run_delayed_refs =
@@ -1652,6 +1660,28 @@ static inline void btrfs_wait_delalloc_flush(struct btrfs_fs_info *fs_info)
btrfs_wait_ordered_roots(fs_info, -1);
}
static inline void
btrfs_wait_pending_ordered(struct btrfs_transaction *cur_trans,
struct btrfs_fs_info *fs_info)
{
struct btrfs_ordered_extent *ordered;
spin_lock(&fs_info->trans_lock);
while (!list_empty(&cur_trans->pending_ordered)) {
ordered = list_first_entry(&cur_trans->pending_ordered,
struct btrfs_ordered_extent,
trans_list);
list_del_init(&ordered->trans_list);
spin_unlock(&fs_info->trans_lock);
wait_event(ordered->wait, test_bit(BTRFS_ORDERED_COMPLETE,
&ordered->flags));
btrfs_put_ordered_extent(ordered);
spin_lock(&fs_info->trans_lock);
}
spin_unlock(&fs_info->trans_lock);
}
int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
struct btrfs_root *root)
{
@@ -1702,6 +1732,7 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
}
spin_lock(&root->fs_info->trans_lock);
list_splice(&trans->ordered, &cur_trans->pending_ordered);
if (cur_trans->state >= TRANS_STATE_COMMIT_START) {
spin_unlock(&root->fs_info->trans_lock);
atomic_inc(&cur_trans->use_count);
@@ -1754,6 +1785,8 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
btrfs_wait_delalloc_flush(root->fs_info);
btrfs_wait_pending_ordered(cur_trans, root->fs_info);
btrfs_scrub_pause(root);
/*
* Ok now we need to make sure to block out any other joins while we
+2
View File
@@ -56,6 +56,7 @@ struct btrfs_transaction {
wait_queue_head_t commit_wait;
struct list_head pending_snapshots;
struct list_head pending_chunks;
struct list_head pending_ordered;
struct list_head switch_commits;
struct btrfs_delayed_ref_root delayed_refs;
int aborted;
@@ -105,6 +106,7 @@ struct btrfs_trans_handle {
*/
struct btrfs_root *root;
struct seq_list delayed_ref_elem;
struct list_head ordered;
struct list_head qgroup_ref_list;
struct list_head new_bgs;
};
+3 -3
View File
@@ -2600,9 +2600,9 @@ int btrfs_sync_log(struct btrfs_trans_handle *trans,
if (atomic_read(&log_root_tree->log_commit[index2])) {
blk_finish_plug(&plug);
btrfs_wait_marked_extents(log, &log->dirty_log_pages, mark);
btrfs_wait_logged_extents(trans, log, log_transid);
wait_log_commit(trans, log_root_tree,
root_log_ctx.log_transid);
btrfs_free_logged_extents(log, log_transid);
mutex_unlock(&log_root_tree->log_mutex);
ret = root_log_ctx.log_ret;
goto out;
@@ -2645,7 +2645,7 @@ int btrfs_sync_log(struct btrfs_trans_handle *trans,
btrfs_wait_marked_extents(log_root_tree,
&log_root_tree->dirty_log_pages,
EXTENT_NEW | EXTENT_DIRTY);
btrfs_wait_logged_extents(log, log_transid);
btrfs_wait_logged_extents(trans, log, log_transid);
btrfs_set_super_log_root(root->fs_info->super_for_commit,
log_root_tree->node->start);
@@ -3766,7 +3766,7 @@ static int log_one_extent(struct btrfs_trans_handle *trans,
fi = btrfs_item_ptr(leaf, path->slots[0],
struct btrfs_file_extent_item);
btrfs_set_token_file_extent_generation(leaf, fi, em->generation,
btrfs_set_token_file_extent_generation(leaf, fi, trans->transid,
&token);
if (test_bit(EXTENT_FLAG_PREALLOC, &em->flags))
btrfs_set_token_file_extent_type(leaf, fi,
+4 -4
View File
@@ -111,7 +111,7 @@ static int fpos_cmp(loff_t l, loff_t r)
/*
* When possible, we try to satisfy a readdir by peeking at the
* dcache. We make this work by carefully ordering dentries on
* d_u.d_child when we initially get results back from the MDS, and
* d_child when we initially get results back from the MDS, and
* falling back to a "normal" sync readdir if any dentries in the dir
* are dropped.
*
@@ -147,11 +147,11 @@ static int __dcache_readdir(struct file *file, struct dir_context *ctx,
p = parent->d_subdirs.prev;
dout(" initial p %p/%p\n", p->prev, p->next);
} else {
p = last->d_u.d_child.prev;
p = last->d_child.prev;
}
more:
dentry = list_entry(p, struct dentry, d_u.d_child);
dentry = list_entry(p, struct dentry, d_child);
di = ceph_dentry(dentry);
while (1) {
dout(" p %p/%p %s d_subdirs %p/%p\n", p->prev, p->next,
@@ -174,7 +174,7 @@ more:
!dentry->d_inode ? " null" : "");
spin_unlock(&dentry->d_lock);
p = p->prev;
dentry = list_entry(p, struct dentry, d_u.d_child);
dentry = list_entry(p, struct dentry, d_child);
di = ceph_dentry(dentry);
}
+1 -1
View File
@@ -1399,7 +1399,7 @@ retry_lookup:
/* reorder parent's d_subdirs */
spin_lock(&parent->d_lock);
spin_lock_nested(&dn->d_lock, DENTRY_D_LOCK_NESTED);
list_move(&dn->d_u.d_child, &parent->d_subdirs);
list_move(&dn->d_child, &parent->d_subdirs);
spin_unlock(&dn->d_lock);
spin_unlock(&parent->d_lock);
}
+1 -1
View File
@@ -895,7 +895,7 @@ inode_has_hashed_dentries(struct inode *inode)
struct dentry *dentry;
spin_lock(&inode->i_lock);
hlist_for_each_entry(dentry, &inode->i_dentry, d_alias) {
hlist_for_each_entry(dentry, &inode->i_dentry, d_u.d_alias) {
if (!d_unhashed(dentry) || IS_ROOT(dentry)) {
spin_unlock(&inode->i_lock);
return true;
+1 -1
View File
@@ -92,7 +92,7 @@ static void coda_flag_children(struct dentry *parent, int flag)
struct dentry *de;
spin_lock(&parent->d_lock);
list_for_each_entry(de, &parent->d_subdirs, d_u.d_child) {
list_for_each_entry(de, &parent->d_subdirs, d_child) {
/* don't know what to do with negative dentries */
if (de->d_inode )
coda_flag_inode(de->d_inode, flag);
+42 -40
View File
@@ -44,7 +44,7 @@
/*
* Usage:
* dcache->d_inode->i_lock protects:
* - i_dentry, d_alias, d_inode of aliases
* - i_dentry, d_u.d_alias, d_inode of aliases
* dcache_hash_bucket lock protects:
* - the dcache hash table
* s_anon bl list spinlock protects:
@@ -59,7 +59,7 @@
* - d_unhashed()
* - d_parent and d_subdirs
* - childrens' d_child and d_parent
* - d_alias, d_inode
* - d_u.d_alias, d_inode
*
* Ordering:
* dentry->d_inode->i_lock
@@ -252,14 +252,12 @@ static void __d_free(struct rcu_head *head)
{
struct dentry *dentry = container_of(head, struct dentry, d_u.d_rcu);
WARN_ON(!hlist_unhashed(&dentry->d_alias));
kmem_cache_free(dentry_cache, dentry);
}
static void __d_free_external(struct rcu_head *head)
{
struct dentry *dentry = container_of(head, struct dentry, d_u.d_rcu);
WARN_ON(!hlist_unhashed(&dentry->d_alias));
kfree(external_name(dentry));
kmem_cache_free(dentry_cache, dentry);
}
@@ -271,6 +269,7 @@ static inline int dname_external(const struct dentry *dentry)
static void dentry_free(struct dentry *dentry)
{
WARN_ON(!hlist_unhashed(&dentry->d_u.d_alias));
if (unlikely(dname_external(dentry))) {
struct external_name *p = external_name(dentry);
if (likely(atomic_dec_and_test(&p->u.count))) {
@@ -311,7 +310,7 @@ static void dentry_iput(struct dentry * dentry)
struct inode *inode = dentry->d_inode;
if (inode) {
dentry->d_inode = NULL;
hlist_del_init(&dentry->d_alias);
hlist_del_init(&dentry->d_u.d_alias);
spin_unlock(&dentry->d_lock);
spin_unlock(&inode->i_lock);
if (!inode->i_nlink)
@@ -336,7 +335,7 @@ static void dentry_unlink_inode(struct dentry * dentry)
struct inode *inode = dentry->d_inode;
__d_clear_type(dentry);
dentry->d_inode = NULL;
hlist_del_init(&dentry->d_alias);
hlist_del_init(&dentry->d_u.d_alias);
dentry_rcuwalk_barrier(dentry);
spin_unlock(&dentry->d_lock);
spin_unlock(&inode->i_lock);
@@ -496,7 +495,7 @@ static void __dentry_kill(struct dentry *dentry)
}
/* if it was on the hash then remove it */
__d_drop(dentry);
list_del(&dentry->d_u.d_child);
__list_del_entry(&dentry->d_child);
/*
* Inform d_walk() that we are no longer attached to the
* dentry tree
@@ -722,7 +721,7 @@ static struct dentry *__d_find_alias(struct inode *inode)
again:
discon_alias = NULL;
hlist_for_each_entry(alias, &inode->i_dentry, d_alias) {
hlist_for_each_entry(alias, &inode->i_dentry, d_u.d_alias) {
spin_lock(&alias->d_lock);
if (S_ISDIR(inode->i_mode) || !d_unhashed(alias)) {
if (IS_ROOT(alias) &&
@@ -772,7 +771,7 @@ void d_prune_aliases(struct inode *inode)
struct dentry *dentry;
restart:
spin_lock(&inode->i_lock);
hlist_for_each_entry(dentry, &inode->i_dentry, d_alias) {
hlist_for_each_entry(dentry, &inode->i_dentry, d_u.d_alias) {
spin_lock(&dentry->d_lock);
if (!dentry->d_lockref.count) {
struct dentry *parent = lock_parent(dentry);
@@ -1051,7 +1050,7 @@ repeat:
resume:
while (next != &this_parent->d_subdirs) {
struct list_head *tmp = next;
struct dentry *dentry = list_entry(tmp, struct dentry, d_u.d_child);
struct dentry *dentry = list_entry(tmp, struct dentry, d_child);
next = tmp->next;
spin_lock_nested(&dentry->d_lock, DENTRY_D_LOCK_NESTED);
@@ -1083,33 +1082,31 @@ resume:
/*
* All done at this level ... ascend and resume the search.
*/
rcu_read_lock();
ascend:
if (this_parent != parent) {
struct dentry *child = this_parent;
this_parent = child->d_parent;
rcu_read_lock();
spin_unlock(&child->d_lock);
spin_lock(&this_parent->d_lock);
/*
* might go back up the wrong parent if we have had a rename
* or deletion
*/
if (this_parent != child->d_parent ||
(child->d_flags & DCACHE_DENTRY_KILLED) ||
need_seqretry(&rename_lock, seq)) {
spin_unlock(&this_parent->d_lock);
rcu_read_unlock();
/* might go back up the wrong parent if we have had a rename. */
if (need_seqretry(&rename_lock, seq))
goto rename_retry;
next = child->d_child.next;
while (unlikely(child->d_flags & DCACHE_DENTRY_KILLED)) {
if (next == &this_parent->d_subdirs)
goto ascend;
child = list_entry(next, struct dentry, d_child);
next = next->next;
}
rcu_read_unlock();
next = child->d_u.d_child.next;
goto resume;
}
if (need_seqretry(&rename_lock, seq)) {
spin_unlock(&this_parent->d_lock);
if (need_seqretry(&rename_lock, seq))
goto rename_retry;
}
rcu_read_unlock();
if (finish)
finish(data);
@@ -1119,6 +1116,9 @@ out_unlock:
return;
rename_retry:
spin_unlock(&this_parent->d_lock);
rcu_read_unlock();
BUG_ON(seq & 1);
if (!retry)
return;
seq = 1;
@@ -1455,8 +1455,8 @@ struct dentry *__d_alloc(struct super_block *sb, const struct qstr *name)
INIT_HLIST_BL_NODE(&dentry->d_hash);
INIT_LIST_HEAD(&dentry->d_lru);
INIT_LIST_HEAD(&dentry->d_subdirs);
INIT_HLIST_NODE(&dentry->d_alias);
INIT_LIST_HEAD(&dentry->d_u.d_child);
INIT_HLIST_NODE(&dentry->d_u.d_alias);
INIT_LIST_HEAD(&dentry->d_child);
d_set_d_op(dentry, dentry->d_sb->s_d_op);
this_cpu_inc(nr_dentry);
@@ -1486,7 +1486,7 @@ struct dentry *d_alloc(struct dentry * parent, const struct qstr *name)
*/
__dget_dlock(parent);
dentry->d_parent = parent;
list_add(&dentry->d_u.d_child, &parent->d_subdirs);
list_add(&dentry->d_child, &parent->d_subdirs);
spin_unlock(&parent->d_lock);
return dentry;
@@ -1579,7 +1579,7 @@ static void __d_instantiate(struct dentry *dentry, struct inode *inode)
spin_lock(&dentry->d_lock);
__d_set_type(dentry, add_flags);
if (inode)
hlist_add_head(&dentry->d_alias, &inode->i_dentry);
hlist_add_head(&dentry->d_u.d_alias, &inode->i_dentry);
dentry->d_inode = inode;
dentry_rcuwalk_barrier(dentry);
spin_unlock(&dentry->d_lock);
@@ -1603,7 +1603,7 @@ static void __d_instantiate(struct dentry *dentry, struct inode *inode)
void d_instantiate(struct dentry *entry, struct inode * inode)
{
BUG_ON(!hlist_unhashed(&entry->d_alias));
BUG_ON(!hlist_unhashed(&entry->d_u.d_alias));
if (inode)
spin_lock(&inode->i_lock);
__d_instantiate(entry, inode);
@@ -1642,7 +1642,7 @@ static struct dentry *__d_instantiate_unique(struct dentry *entry,
return NULL;
}
hlist_for_each_entry(alias, &inode->i_dentry, d_alias) {
hlist_for_each_entry(alias, &inode->i_dentry, d_u.d_alias) {
/*
* Don't need alias->d_lock here, because aliases with
* d_parent == entry->d_parent are not subject to name or
@@ -1668,7 +1668,7 @@ struct dentry *d_instantiate_unique(struct dentry *entry, struct inode *inode)
{
struct dentry *result;
BUG_ON(!hlist_unhashed(&entry->d_alias));
BUG_ON(!hlist_unhashed(&entry->d_u.d_alias));
if (inode)
spin_lock(&inode->i_lock);
@@ -1699,7 +1699,7 @@ EXPORT_SYMBOL(d_instantiate_unique);
*/
int d_instantiate_no_diralias(struct dentry *entry, struct inode *inode)
{
BUG_ON(!hlist_unhashed(&entry->d_alias));
BUG_ON(!hlist_unhashed(&entry->d_u.d_alias));
spin_lock(&inode->i_lock);
if (S_ISDIR(inode->i_mode) && !hlist_empty(&inode->i_dentry)) {
@@ -1738,7 +1738,7 @@ static struct dentry * __d_find_any_alias(struct inode *inode)
if (hlist_empty(&inode->i_dentry))
return NULL;
alias = hlist_entry(inode->i_dentry.first, struct dentry, d_alias);
alias = hlist_entry(inode->i_dentry.first, struct dentry, d_u.d_alias);
__dget(alias);
return alias;
}
@@ -1800,7 +1800,7 @@ static struct dentry *__d_obtain_alias(struct inode *inode, int disconnected)
spin_lock(&tmp->d_lock);
tmp->d_inode = inode;
tmp->d_flags |= add_flags;
hlist_add_head(&tmp->d_alias, &inode->i_dentry);
hlist_add_head(&tmp->d_u.d_alias, &inode->i_dentry);
hlist_bl_lock(&tmp->d_sb->s_anon);
hlist_bl_add_head(&tmp->d_hash, &tmp->d_sb->s_anon);
hlist_bl_unlock(&tmp->d_sb->s_anon);
@@ -2235,7 +2235,7 @@ int d_validate(struct dentry *dentry, struct dentry *dparent)
struct dentry *child;
spin_lock(&dparent->d_lock);
list_for_each_entry(child, &dparent->d_subdirs, d_u.d_child) {
list_for_each_entry(child, &dparent->d_subdirs, d_child) {
if (dentry == child) {
spin_lock_nested(&dentry->d_lock, DENTRY_D_LOCK_NESTED);
__dget_dlock(dentry);
@@ -2393,6 +2393,8 @@ static void swap_names(struct dentry *dentry, struct dentry *target)
*/
unsigned int i;
BUILD_BUG_ON(!IS_ALIGNED(DNAME_INLINE_LEN, sizeof(long)));
kmemcheck_mark_initialized(dentry->d_iname, DNAME_INLINE_LEN);
kmemcheck_mark_initialized(target->d_iname, DNAME_INLINE_LEN);
for (i = 0; i < DNAME_INLINE_LEN / sizeof(long); i++) {
swap(((long *) &dentry->d_iname)[i],
((long *) &target->d_iname)[i]);
@@ -2526,13 +2528,13 @@ static void __d_move(struct dentry *dentry, struct dentry *target,
/* splicing a tree */
dentry->d_parent = target->d_parent;
target->d_parent = target;
list_del_init(&target->d_u.d_child);
list_move(&dentry->d_u.d_child, &dentry->d_parent->d_subdirs);
list_del_init(&target->d_child);
list_move(&dentry->d_child, &dentry->d_parent->d_subdirs);
} else {
/* swapping two dentries */
swap(dentry->d_parent, target->d_parent);
list_move(&target->d_u.d_child, &target->d_parent->d_subdirs);
list_move(&dentry->d_u.d_child, &dentry->d_parent->d_subdirs);
list_move(&target->d_child, &target->d_parent->d_subdirs);
list_move(&dentry->d_child, &dentry->d_parent->d_subdirs);
if (exchange)
fsnotify_d_move(target);
fsnotify_d_move(dentry);
@@ -3321,7 +3323,7 @@ void d_tmpfile(struct dentry *dentry, struct inode *inode)
{
inode_dec_link_count(inode);
BUG_ON(dentry->d_name.name != dentry->d_iname ||
!hlist_unhashed(&dentry->d_alias) ||
!hlist_unhashed(&dentry->d_u.d_alias) ||
!d_unlinked(dentry));
spin_lock(&dentry->d_parent->d_lock);
spin_lock_nested(&dentry->d_lock, DENTRY_D_LOCK_NESTED);
+1 -1
View File
@@ -553,7 +553,7 @@ void debugfs_remove_recursive(struct dentry *dentry)
* use the d_u.d_child as the rcu head and corrupt this list.
*/
spin_lock(&parent->d_lock);
list_for_each_entry(child, &parent->d_subdirs, d_u.d_child) {
list_for_each_entry(child, &parent->d_subdirs, d_child) {
if (!debugfs_positive(child))
continue;
-1
View File
@@ -1917,7 +1917,6 @@ ecryptfs_decode_from_filename(unsigned char *dst, size_t *dst_size,
break;
case 2:
dst[dst_byte_offset++] |= (src_byte);
dst[dst_byte_offset] = 0;
current_bit_offset = 0;
break;
}
-12
View File
@@ -190,23 +190,11 @@ static int ecryptfs_open(struct inode *inode, struct file *file)
{
int rc = 0;
struct ecryptfs_crypt_stat *crypt_stat = NULL;
struct ecryptfs_mount_crypt_stat *mount_crypt_stat;
struct dentry *ecryptfs_dentry = file->f_path.dentry;
/* Private value of ecryptfs_dentry allocated in
* ecryptfs_lookup() */
struct ecryptfs_file_info *file_info;
mount_crypt_stat = &ecryptfs_superblock_to_private(
ecryptfs_dentry->d_sb)->mount_crypt_stat;
if ((mount_crypt_stat->flags & ECRYPTFS_ENCRYPTED_VIEW_ENABLED)
&& ((file->f_flags & O_WRONLY) || (file->f_flags & O_RDWR)
|| (file->f_flags & O_CREAT) || (file->f_flags & O_TRUNC)
|| (file->f_flags & O_APPEND))) {
printk(KERN_WARNING "Mount has encrypted view enabled; "
"files may only be read\n");
rc = -EPERM;
goto out;
}
/* Released in ecryptfs_release or end of function if failure */
file_info = kmem_cache_zalloc(ecryptfs_file_info_cache, GFP_KERNEL);
ecryptfs_set_file_private(file, file_info);
+13 -3
View File
@@ -493,6 +493,7 @@ static struct dentry *ecryptfs_mount(struct file_system_type *fs_type, int flags
{
struct super_block *s;
struct ecryptfs_sb_info *sbi;
struct ecryptfs_mount_crypt_stat *mount_crypt_stat;
struct ecryptfs_dentry_info *root_info;
const char *err = "Getting sb failed";
struct inode *inode;
@@ -511,6 +512,7 @@ static struct dentry *ecryptfs_mount(struct file_system_type *fs_type, int flags
err = "Error parsing options";
goto out;
}
mount_crypt_stat = &sbi->mount_crypt_stat;
s = sget(fs_type, NULL, set_anon_super, flags, NULL);
if (IS_ERR(s)) {
@@ -557,11 +559,19 @@ static struct dentry *ecryptfs_mount(struct file_system_type *fs_type, int flags
/**
* Set the POSIX ACL flag based on whether they're enabled in the lower
* mount. Force a read-only eCryptfs mount if the lower mount is ro.
* Allow a ro eCryptfs mount even when the lower mount is rw.
* mount.
*/
s->s_flags = flags & ~MS_POSIXACL;
s->s_flags |= path.dentry->d_sb->s_flags & (MS_RDONLY | MS_POSIXACL);
s->s_flags |= path.dentry->d_sb->s_flags & MS_POSIXACL;
/**
* Force a read-only eCryptfs mount when:
* 1) The lower mount is ro
* 2) The ecryptfs_encrypted_view mount option is specified
*/
if (path.dentry->d_sb->s_flags & MS_RDONLY ||
mount_crypt_stat->flags & ECRYPTFS_ENCRYPTED_VIEW_ENABLED)
s->s_flags |= MS_RDONLY;
s->s_maxbytes = path.dentry->d_sb->s_maxbytes;
s->s_blocksize = path.dentry->d_sb->s_blocksize;
+1 -1
View File
@@ -50,7 +50,7 @@ find_acceptable_alias(struct dentry *result,
inode = result->d_inode;
spin_lock(&inode->i_lock);
hlist_for_each_entry(dentry, &inode->i_dentry, d_alias) {
hlist_for_each_entry(dentry, &inode->i_dentry, d_u.d_alias) {
dget(dentry);
spin_unlock(&inode->i_lock);
if (toput)
+11 -13
View File
@@ -1007,21 +1007,19 @@ inline_data:
goto out;
}
if (dn.data_blkaddr == NEW_ADDR) {
if (f2fs_has_inline_data(inode)) {
err = f2fs_read_inline_data(inode, page);
if (err) {
page_cache_release(page);
goto fail;
}
} else if (dn.data_blkaddr == NEW_ADDR) {
zero_user_segment(page, 0, PAGE_CACHE_SIZE);
} else {
if (f2fs_has_inline_data(inode)) {
err = f2fs_read_inline_data(inode, page);
if (err) {
page_cache_release(page);
goto fail;
}
} else {
err = f2fs_submit_page_bio(sbi, page, dn.data_blkaddr,
READ_SYNC);
if (err)
goto fail;
}
err = f2fs_submit_page_bio(sbi, page, dn.data_blkaddr,
READ_SYNC);
if (err)
goto fail;
lock_page(page);
if (unlikely(!PageUptodate(page))) {
+1 -1
View File
@@ -1004,6 +1004,7 @@ int f2fs_trim_fs(struct f2fs_sb_info *sbi, struct fstrim_range *range)
range->len < sbi->blocksize)
return -EINVAL;
cpc.trimmed = 0;
if (end <= MAIN_BLKADDR(sbi))
goto out;
@@ -1015,7 +1016,6 @@ int f2fs_trim_fs(struct f2fs_sb_info *sbi, struct fstrim_range *range)
cpc.trim_start = start_segno;
cpc.trim_end = end_segno;
cpc.trim_minlen = range->minlen >> sbi->log_blocksize;
cpc.trimmed = 0;
/* do checkpoint to issue discard commands safely */
write_checkpoint(sbi, &cpc);
+9
View File
@@ -30,6 +30,7 @@ struct rock_state {
int cont_size;
int cont_extent;
int cont_offset;
int cont_loops;
struct inode *inode;
};
@@ -73,6 +74,9 @@ static void init_rock_state(struct rock_state *rs, struct inode *inode)
rs->inode = inode;
}
/* Maximum number of Rock Ridge continuation entries */
#define RR_MAX_CE_ENTRIES 32
/*
* Returns 0 if the caller should continue scanning, 1 if the scan must end
* and -ve on error.
@@ -105,6 +109,8 @@ static int rock_continue(struct rock_state *rs)
goto out;
}
ret = -EIO;
if (++rs->cont_loops >= RR_MAX_CE_ENTRIES)
goto out;
bh = sb_bread(rs->inode->i_sb, rs->cont_extent);
if (bh) {
memcpy(rs->buffer, bh->b_data + rs->cont_offset,
@@ -356,6 +362,9 @@ repeat:
rs.cont_size = isonum_733(rr->u.CE.size);
break;
case SIG('E', 'R'):
/* Invalid length of ER tag id? */
if (rr->u.ER.len_id + offsetof(struct rock_ridge, u.ER.data) > rr->len)
goto out;
ISOFS_SB(inode->i_sb)->s_rock = 1;
printk(KERN_DEBUG "ISO 9660 Extensions: ");
{
+6 -6
View File
@@ -114,18 +114,18 @@ loff_t dcache_dir_lseek(struct file *file, loff_t offset, int whence)
spin_lock(&dentry->d_lock);
/* d_lock not required for cursor */
list_del(&cursor->d_u.d_child);
list_del(&cursor->d_child);
p = dentry->d_subdirs.next;
while (n && p != &dentry->d_subdirs) {
struct dentry *next;
next = list_entry(p, struct dentry, d_u.d_child);
next = list_entry(p, struct dentry, d_child);
spin_lock_nested(&next->d_lock, DENTRY_D_LOCK_NESTED);
if (simple_positive(next))
n--;
spin_unlock(&next->d_lock);
p = p->next;
}
list_add_tail(&cursor->d_u.d_child, p);
list_add_tail(&cursor->d_child, p);
spin_unlock(&dentry->d_lock);
}
}
@@ -150,7 +150,7 @@ int dcache_readdir(struct file *file, struct dir_context *ctx)
{
struct dentry *dentry = file->f_path.dentry;
struct dentry *cursor = file->private_data;
struct list_head *p, *q = &cursor->d_u.d_child;
struct list_head *p, *q = &cursor->d_child;
if (!dir_emit_dots(file, ctx))
return 0;
@@ -159,7 +159,7 @@ int dcache_readdir(struct file *file, struct dir_context *ctx)
list_move(q, &dentry->d_subdirs);
for (p = q->next; p != &dentry->d_subdirs; p = p->next) {
struct dentry *next = list_entry(p, struct dentry, d_u.d_child);
struct dentry *next = list_entry(p, struct dentry, d_child);
spin_lock_nested(&next->d_lock, DENTRY_D_LOCK_NESTED);
if (!simple_positive(next)) {
spin_unlock(&next->d_lock);
@@ -287,7 +287,7 @@ int simple_empty(struct dentry *dentry)
int ret = 0;
spin_lock(&dentry->d_lock);
list_for_each_entry(child, &dentry->d_subdirs, d_u.d_child) {
list_for_each_entry(child, &dentry->d_subdirs, d_child) {
spin_lock_nested(&child->d_lock, DENTRY_D_LOCK_NESTED);
if (simple_positive(child)) {
spin_unlock(&child->d_lock);
+12 -1
View File
@@ -1369,6 +1369,8 @@ void umount_tree(struct mount *mnt, int how)
}
if (last) {
last->mnt_hash.next = unmounted.first;
if (unmounted.first)
unmounted.first->pprev = &last->mnt_hash.next;
unmounted.first = tmp_list.first;
unmounted.first->pprev = &unmounted.first;
}
@@ -1544,6 +1546,9 @@ SYSCALL_DEFINE2(umount, char __user *, name, int, flags)
goto dput_and_out;
if (mnt->mnt.mnt_flags & MNT_LOCKED)
goto dput_and_out;
retval = -EPERM;
if (flags & MNT_FORCE && !capable(CAP_SYS_ADMIN))
goto dput_and_out;
retval = do_umount(mnt, flags);
dput_and_out:
@@ -2098,7 +2103,13 @@ static int do_remount(struct path *path, int flags, int mnt_flags,
}
if ((mnt->mnt.mnt_flags & MNT_LOCK_NODEV) &&
!(mnt_flags & MNT_NODEV)) {
return -EPERM;
/* Was the nodev implicitly added in mount? */
if ((mnt->mnt_ns->user_ns != &init_user_ns) &&
!(sb->s_type->fs_flags & FS_USERNS_DEV_MOUNT)) {
mnt_flags |= MNT_NODEV;
} else {
return -EPERM;
}
}
if ((mnt->mnt.mnt_flags & MNT_LOCK_NOSUID) &&
!(mnt_flags & MNT_NOSUID)) {
+1 -1
View File
@@ -403,7 +403,7 @@ ncp_dget_fpos(struct dentry *dentry, struct dentry *parent, unsigned long fpos)
/* If a pointer is invalid, we search the dentry. */
spin_lock(&parent->d_lock);
list_for_each_entry(dent, &parent->d_subdirs, d_u.d_child) {
list_for_each_entry(dent, &parent->d_subdirs, d_child) {
if ((unsigned long)dent->d_fsdata == fpos) {
if (dent->d_inode)
dget(dent);
-1
View File
@@ -447,7 +447,6 @@ static long __ncp_ioctl(struct inode *inode, unsigned int cmd, unsigned long arg
result = -EIO;
}
}
result = 0;
}
mutex_unlock(&server->root_setup_lock);
+2 -2
View File
@@ -191,7 +191,7 @@ ncp_renew_dentries(struct dentry *parent)
struct dentry *dentry;
spin_lock(&parent->d_lock);
list_for_each_entry(dentry, &parent->d_subdirs, d_u.d_child) {
list_for_each_entry(dentry, &parent->d_subdirs, d_child) {
if (dentry->d_fsdata == NULL)
ncp_age_dentry(server, dentry);
else
@@ -207,7 +207,7 @@ ncp_invalidate_dircache_entries(struct dentry *parent)
struct dentry *dentry;
spin_lock(&parent->d_lock);
list_for_each_entry(dentry, &parent->d_subdirs, d_u.d_child) {
list_for_each_entry(dentry, &parent->d_subdirs, d_child) {
dentry->d_fsdata = NULL;
ncp_age_dentry(server, dentry);
}
+1 -1
View File
@@ -58,7 +58,7 @@ static int nfs_superblock_set_dummy_root(struct super_block *sb, struct inode *i
*/
spin_lock(&sb->s_root->d_inode->i_lock);
spin_lock(&sb->s_root->d_lock);
hlist_del_init(&sb->s_root->d_alias);
hlist_del_init(&sb->s_root->d_u.d_alias);
spin_unlock(&sb->s_root->d_lock);
spin_unlock(&sb->s_root->d_inode->i_lock);
}
+3 -3
View File
@@ -7704,6 +7704,9 @@ nfs4_proc_layoutget(struct nfs4_layoutget *lgp, gfp_t gfp_flags)
dprintk("--> %s\n", __func__);
/* nfs4_layoutget_release calls pnfs_put_layout_hdr */
pnfs_get_layout_hdr(NFS_I(inode)->layout);
lgp->args.layout.pages = nfs4_alloc_pages(max_pages, gfp_flags);
if (!lgp->args.layout.pages) {
nfs4_layoutget_release(lgp);
@@ -7716,9 +7719,6 @@ nfs4_proc_layoutget(struct nfs4_layoutget *lgp, gfp_t gfp_flags)
lgp->res.seq_res.sr_slot = NULL;
nfs4_init_sequence(&lgp->args.seq_args, &lgp->res.seq_res, 0);
/* nfs4_layoutget_release calls pnfs_put_layout_hdr */
pnfs_get_layout_hdr(NFS_I(inode)->layout);
task = rpc_run_task(&task_setup_data);
if (IS_ERR(task))
return ERR_CAST(task);
+2 -2
View File
@@ -63,14 +63,14 @@ void __fsnotify_update_child_dentry_flags(struct inode *inode)
spin_lock(&inode->i_lock);
/* run all of the dentries associated with this inode. Since this is a
* directory, there damn well better only be one item on this list */
hlist_for_each_entry(alias, &inode->i_dentry, d_alias) {
hlist_for_each_entry(alias, &inode->i_dentry, d_u.d_alias) {
struct dentry *child;
/* run all of the children of the original inode and fix their
* d_flags to indicate parental interest (their parent is the
* original inode) */
spin_lock(&alias->d_lock);
list_for_each_entry(child, &alias->d_subdirs, d_u.d_child) {
list_for_each_entry(child, &alias->d_subdirs, d_child) {
if (!child->d_inode)
continue;
+1 -1
View File
@@ -172,7 +172,7 @@ struct dentry *ocfs2_find_local_alias(struct inode *inode,
struct dentry *dentry;
spin_lock(&inode->i_lock);
hlist_for_each_entry(dentry, &inode->i_dentry, d_alias) {
hlist_for_each_entry(dentry, &inode->i_dentry, d_u.d_alias) {
spin_lock(&dentry->d_lock);
if (ocfs2_match_dentry(dentry, parent_blkno, skip_unhashed)) {
trace_ocfs2_find_local_alias(dentry->d_name.len,
+53
View File
@@ -2464,6 +2464,57 @@ static const struct file_operations proc_projid_map_operations = {
.llseek = seq_lseek,
.release = proc_id_map_release,
};
static int proc_setgroups_open(struct inode *inode, struct file *file)
{
struct user_namespace *ns = NULL;
struct task_struct *task;
int ret;
ret = -ESRCH;
task = get_proc_task(inode);
if (task) {
rcu_read_lock();
ns = get_user_ns(task_cred_xxx(task, user_ns));
rcu_read_unlock();
put_task_struct(task);
}
if (!ns)
goto err;
if (file->f_mode & FMODE_WRITE) {
ret = -EACCES;
if (!ns_capable(ns, CAP_SYS_ADMIN))
goto err_put_ns;
}
ret = single_open(file, &proc_setgroups_show, ns);
if (ret)
goto err_put_ns;
return 0;
err_put_ns:
put_user_ns(ns);
err:
return ret;
}
static int proc_setgroups_release(struct inode *inode, struct file *file)
{
struct seq_file *seq = file->private_data;
struct user_namespace *ns = seq->private;
int ret = single_release(inode, file);
put_user_ns(ns);
return ret;
}
static const struct file_operations proc_setgroups_operations = {
.open = proc_setgroups_open,
.write = proc_setgroups_write,
.read = seq_read,
.llseek = seq_lseek,
.release = proc_setgroups_release,
};
#endif /* CONFIG_USER_NS */
static int proc_pid_personality(struct seq_file *m, struct pid_namespace *ns,
@@ -2572,6 +2623,7 @@ static const struct pid_entry tgid_base_stuff[] = {
REG("uid_map", S_IRUGO|S_IWUSR, proc_uid_map_operations),
REG("gid_map", S_IRUGO|S_IWUSR, proc_gid_map_operations),
REG("projid_map", S_IRUGO|S_IWUSR, proc_projid_map_operations),
REG("setgroups", S_IRUGO|S_IWUSR, proc_setgroups_operations),
#endif
#ifdef CONFIG_CHECKPOINT_RESTORE
REG("timers", S_IRUGO, proc_timers_operations),
@@ -2913,6 +2965,7 @@ static const struct pid_entry tid_base_stuff[] = {
REG("uid_map", S_IRUGO|S_IWUSR, proc_uid_map_operations),
REG("gid_map", S_IRUGO|S_IWUSR, proc_gid_map_operations),
REG("projid_map", S_IRUGO|S_IWUSR, proc_projid_map_operations),
REG("setgroups", S_IRUGO|S_IWUSR, proc_setgroups_operations),
#endif
};
+2 -1
View File
@@ -167,7 +167,8 @@ static int udf_readdir(struct file *file, struct dir_context *ctx)
continue;
}
flen = udf_get_filename(dir->i_sb, nameptr, fname, lfi);
flen = udf_get_filename(dir->i_sb, nameptr, lfi, fname,
UDF_NAME_LEN);
if (!flen)
continue;

Some files were not shown because too many files have changed in this diff Show More