Linux 4.1.3

commit 469d7d22ce upstream.

The i2c_master_recv() uses readsize to receive data from i2c but compares
to size of rdbuf which is always 27. This would cause problem when the
max_fingers is not 5. Change the comparison value to readsize instead.

Fixes: 36874c7e21 ("Input: pixcir_i2c_ts - support up to 5 fingers and
hardware tracking IDs:)

Signed-off-by: Frodo Lai <frodo_lai@bcmcom.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/DMA-API-HOWTO.txt

@@ -25,13 +25,18 @@ physical addresses.  These are the addresses in /proc/iomem.  The physical
 address is not directly useful to a driver; it must use ioremap() to map
 the space and produce a virtual address.
 
-I/O devices use a third kind of address: a "bus address" or "DMA address".
-If a device has registers at an MMIO address, or if it performs DMA to read
-or write system memory, the addresses used by the device are bus addresses.
-In some systems, bus addresses are identical to CPU physical addresses, but
-in general they are not.  IOMMUs and host bridges can produce arbitrary
+I/O devices use a third kind of address: a "bus address".  If a device has
+registers at an MMIO address, or if it performs DMA to read or write system
+memory, the addresses used by the device are bus addresses.  In some
+systems, bus addresses are identical to CPU physical addresses, but in
+general they are not.  IOMMUs and host bridges can produce arbitrary
 mappings between physical and bus addresses.
 
+From a device's point of view, DMA uses the bus address space, but it may
+be restricted to a subset of that space.  For example, even if a system
+supports 64-bit addresses for main memory and PCI BARs, it may use an IOMMU
+so devices only need to use 32-bit DMA addresses.
+
 Here's a picture and some examples:
 
                CPU                  CPU                  Bus
@@ -72,11 +77,11 @@ can use virtual address X to access the buffer, but the device itself
 cannot because DMA doesn't go through the CPU virtual memory system.
 
 In some simple systems, the device can do DMA directly to physical address
-Y.  But in many others, there is IOMMU hardware that translates bus
+Y.  But in many others, there is IOMMU hardware that translates DMA
 addresses to physical addresses, e.g., it translates Z to Y.  This is part
 of the reason for the DMA API: the driver can give a virtual address X to
 an interface like dma_map_single(), which sets up any required IOMMU
-mapping and returns the bus address Z.  The driver then tells the device to
+mapping and returns the DMA address Z.  The driver then tells the device to
 do DMA to Z, and the IOMMU maps it to the buffer at address Y in system
 RAM.
 
@@ -98,7 +103,7 @@ First of all, you should make sure
 #include <linux/dma-mapping.h>
 
 is in your driver, which provides the definition of dma_addr_t.  This type
-can hold any valid DMA or bus address for the platform and should be used
+can hold any valid DMA address for the platform and should be used
 everywhere you hold a DMA address returned from the DMA mapping functions.
 
 			 What memory is DMA'able?
@@ -316,7 +321,7 @@ There are two types of DMA mappings:
   Think of "consistent" as "synchronous" or "coherent".
 
   The current default is to return consistent memory in the low 32
-  bits of the bus space.  However, for future compatibility you should
+  bits of the DMA space.  However, for future compatibility you should
   set the consistent mask even if this default is fine for your
   driver.
 
@@ -403,7 +408,7 @@ dma_alloc_coherent() returns two values: the virtual address which you
 can use to access it from the CPU and dma_handle which you pass to the
 card.
 
-The CPU virtual address and the DMA bus address are both
+The CPU virtual address and the DMA address are both
 guaranteed to be aligned to the smallest PAGE_SIZE order which
 is greater than or equal to the requested size.  This invariant
 exists (for example) to guarantee that if you allocate a chunk
@@ -645,8 +650,8 @@ PLEASE NOTE:  The 'nents' argument to the dma_unmap_sg call must be
               dma_map_sg call.
 
 Every dma_map_{single,sg}() call should have its dma_unmap_{single,sg}()
-counterpart, because the bus address space is a shared resource and
-you could render the machine unusable by consuming all bus addresses.
+counterpart, because the DMA address space is a shared resource and
+you could render the machine unusable by consuming all DMA addresses.
 
 If you need to use the same streaming DMA region multiple times and touch
 the data in between the DMA transfers, the buffer needs to be synced

Documentation/DMA-API.txt

@@ -18,10 +18,10 @@ Part I - dma_ API
 To get the dma_ API, you must #include <linux/dma-mapping.h>.  This
 provides dma_addr_t and the interfaces described below.
 
-A dma_addr_t can hold any valid DMA or bus address for the platform.  It
-can be given to a device to use as a DMA source or target.  A CPU cannot
-reference a dma_addr_t directly because there may be translation between
-its physical address space and the bus address space.
+A dma_addr_t can hold any valid DMA address for the platform.  It can be
+given to a device to use as a DMA source or target.  A CPU cannot reference
+a dma_addr_t directly because there may be translation between its physical
+address space and the DMA address space.
 
 Part Ia - Using large DMA-coherent buffers
 ------------------------------------------
@@ -42,7 +42,7 @@ It returns a pointer to the allocated region (in the processor's virtual
 address space) or NULL if the allocation failed.
 
 It also returns a <dma_handle> which may be cast to an unsigned integer the
-same width as the bus and given to the device as the bus address base of
+same width as the bus and given to the device as the DMA address base of
 the region.
 
 Note: consistent memory can be expensive on some platforms, and the
@@ -193,7 +193,7 @@ dma_map_single(struct device *dev, void *cpu_addr, size_t size,
 		      enum dma_data_direction direction)
 
 Maps a piece of processor virtual memory so it can be accessed by the
-device and returns the bus address of the memory.
+device and returns the DMA address of the memory.
 
 The direction for both APIs may be converted freely by casting.
 However the dma_ API uses a strongly typed enumerator for its
@@ -212,20 +212,20 @@ contiguous piece of memory.  For this reason, memory to be mapped by
 this API should be obtained from sources which guarantee it to be
 physically contiguous (like kmalloc).
 
-Further, the bus address of the memory must be within the
+Further, the DMA address of the memory must be within the
 dma_mask of the device (the dma_mask is a bit mask of the
-addressable region for the device, i.e., if the bus address of
-the memory ANDed with the dma_mask is still equal to the bus
+addressable region for the device, i.e., if the DMA address of
+the memory ANDed with the dma_mask is still equal to the DMA
 address, then the device can perform DMA to the memory).  To
 ensure that the memory allocated by kmalloc is within the dma_mask,
 the driver may specify various platform-dependent flags to restrict
-the bus address range of the allocation (e.g., on x86, GFP_DMA
-guarantees to be within the first 16MB of available bus addresses,
+the DMA address range of the allocation (e.g., on x86, GFP_DMA
+guarantees to be within the first 16MB of available DMA addresses,
 as required by ISA devices).
 
 Note also that the above constraints on physical contiguity and
 dma_mask may not apply if the platform has an IOMMU (a device which
-maps an I/O bus address to a physical memory address).  However, to be
+maps an I/O DMA address to a physical memory address).  However, to be
 portable, device driver writers may *not* assume that such an IOMMU
 exists.
 
@@ -296,7 +296,7 @@ reduce current DMA mapping usage or delay and try again later).
 	dma_map_sg(struct device *dev, struct scatterlist *sg,
 		int nents, enum dma_data_direction direction)
 
-Returns: the number of bus address segments mapped (this may be shorter
+Returns: the number of DMA address segments mapped (this may be shorter
 than <nents> passed in if some elements of the scatter/gather list are
 physically or virtually adjacent and an IOMMU maps them with a single
 entry).
@@ -340,7 +340,7 @@ must be the same as those and passed in to the scatter/gather mapping
 API.
 
 Note: <nents> must be the number you passed in, *not* the number of
-bus address entries returned.
+DMA address entries returned.
 
 void
 dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
@@ -507,7 +507,7 @@ it's asked for coherent memory for this device.
 phys_addr is the CPU physical address to which the memory is currently
 assigned (this will be ioremapped so the CPU can access the region).
 
-device_addr is the bus address the device needs to be programmed
+device_addr is the DMA address the device needs to be programmed
 with to actually address this memory (this will be handed out as the
 dma_addr_t in dma_alloc_coherent()).
 

Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt

@@ -1,7 +1,7 @@
 * Marvell Armada 370 / Armada XP Ethernet Controller (NETA)
 
 Required properties:
-- compatible: should be "marvell,armada-370-neta".
+- compatible: "marvell,armada-370-neta" or "marvell,armada-xp-neta".
 - reg: address and length of the register set for the device.
 - interrupts: interrupt for the device
 - phy: See ethernet.txt file in the same directory.

Documentation/devicetree/bindings/spi/spi_pl022.txt

@@ -4,9 +4,9 @@ Required properties:
 - compatible : "arm,pl022", "arm,primecell"
 - reg : Offset and length of the register set for the device
 - interrupts : Should contain SPI controller interrupt
+- num-cs : total number of chipselects
 
 Optional properties:
-- num-cs : total number of chipselects
 - cs-gpios : should specify GPIOs used for chipselects.
   The gpios will be referred to as reg = <index> in the SPI child nodes.
   If unspecified, a single SPI device without a chip select can be used.

Makefile

@@ -1,8 +1,8 @@
 VERSION = 4
 PATCHLEVEL = 1
-SUBLEVEL = 0
+SUBLEVEL = 3
 EXTRAVERSION =
-NAME = Hurr durr I'ma sheep
+NAME = Series 4800
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"

arch/arc/include/asm/atomic.h

@@ -43,6 +43,12 @@ static inline int atomic_##op##_return(int i, atomic_t *v)		\
 {									\
 	unsigned int temp;						\
 									\
+	/*								\
+	 * Explicit full memory barrier needed before/after as		\
+	 * LLOCK/SCOND thmeselves don't provide any such semantics	\
+	 */								\
+	smp_mb();							\
+									\
 	__asm__ __volatile__(						\
 	"1:	llock   %0, [%1]	\n"				\
 	"	" #asm_op " %0, %0, %2	\n"				\
@@ -52,6 +58,8 @@ static inline int atomic_##op##_return(int i, atomic_t *v)		\
 	: "r"(&v->counter), "ir"(i)					\
 	: "cc");							\
 									\
+	smp_mb();							\
+									\
 	return temp;							\
 }
 
@@ -105,6 +113,9 @@ static inline int atomic_##op##_return(int i, atomic_t *v)		\
 	unsigned long flags;						\
 	unsigned long temp;						\
 									\
+	/*								\
+	 * spin lock/unlock provides the needed smp_mb() before/after	\
+	 */								\
 	atomic_ops_lock(flags);						\
 	temp = v->counter;						\
 	temp c_op i;							\
@@ -142,9 +153,19 @@ ATOMIC_OP(and, &=, and)
 #define __atomic_add_unless(v, a, u)					\
 ({									\
 	int c, old;							\
+									\
+	/*								\
+	 * Explicit full memory barrier needed before/after as		\
+	 * LLOCK/SCOND thmeselves don't provide any such semantics	\
+	 */								\
+	smp_mb();							\
+									\
 	c = atomic_read(v);						\
 	while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c)\
 		c = old;						\
+									\
+	smp_mb();							\
+									\
 	c;								\
 })
 

arch/arc/include/asm/bitops.h

@@ -117,6 +117,12 @@ static inline int test_and_set_bit(unsigned long nr, volatile unsigned long *m)
 	if (__builtin_constant_p(nr))
 		nr &= 0x1f;
 
+	/*
+	 * Explicit full memory barrier needed before/after as
+	 * LLOCK/SCOND themselves don't provide any such semantics
+	 */
+	smp_mb();
+
 	__asm__ __volatile__(
 	"1:	llock   %0, [%2]	\n"
 	"	bset    %1, %0, %3	\n"
@@ -126,6 +132,8 @@ static inline int test_and_set_bit(unsigned long nr, volatile unsigned long *m)
 	: "r"(m), "ir"(nr)
 	: "cc");
 
+	smp_mb();
+
 	return (old & (1 << nr)) != 0;
 }
 
@@ -139,6 +147,8 @@ test_and_clear_bit(unsigned long nr, volatile unsigned long *m)
 	if (__builtin_constant_p(nr))
 		nr &= 0x1f;
 
+	smp_mb();
+
 	__asm__ __volatile__(
 	"1:	llock   %0, [%2]	\n"
 	"	bclr    %1, %0, %3	\n"
@@ -148,6 +158,8 @@ test_and_clear_bit(unsigned long nr, volatile unsigned long *m)
 	: "r"(m), "ir"(nr)
 	: "cc");
 
+	smp_mb();
+
 	return (old & (1 << nr)) != 0;
 }
 
@@ -161,6 +173,8 @@ test_and_change_bit(unsigned long nr, volatile unsigned long *m)
 	if (__builtin_constant_p(nr))
 		nr &= 0x1f;
 
+	smp_mb();
+
 	__asm__ __volatile__(
 	"1:	llock   %0, [%2]	\n"
 	"	bxor    %1, %0, %3	\n"
@@ -170,6 +184,8 @@ test_and_change_bit(unsigned long nr, volatile unsigned long *m)
 	: "r"(m), "ir"(nr)
 	: "cc");
 
+	smp_mb();
+
 	return (old & (1 << nr)) != 0;
 }
 
@@ -249,6 +265,9 @@ static inline int test_and_set_bit(unsigned long nr, volatile unsigned long *m)
 	if (__builtin_constant_p(nr))
 		nr &= 0x1f;
 
+	/*
+	 * spin lock/unlock provide the needed smp_mb() before/after
+	 */
 	bitops_lock(flags);
 
 	old = *m;

arch/arc/include/asm/cmpxchg.h

@@ -10,6 +10,8 @@
 #define __ASM_ARC_CMPXCHG_H
 
 #include <linux/types.h>
+
+#include <asm/barrier.h>
 #include <asm/smp.h>
 
 #ifdef CONFIG_ARC_HAS_LLSC
@@ -19,16 +21,25 @@ __cmpxchg(volatile void *ptr, unsigned long expected, unsigned long new)
 {
 	unsigned long prev;
 
+	/*
+	 * Explicit full memory barrier needed before/after as
+	 * LLOCK/SCOND thmeselves don't provide any such semantics
+	 */
+	smp_mb();
+
 	__asm__ __volatile__(
 	"1:	llock   %0, [%1]	\n"
 	"	brne    %0, %2, 2f	\n"
 	"	scond   %3, [%1]	\n"
 	"	bnz     1b		\n"
 	"2:				\n"
-	: "=&r"(prev)
-	: "r"(ptr), "ir"(expected),
-	  "r"(new) /* can't be "ir". scond can't take limm for "b" */
-	: "cc");
+	: "=&r"(prev)	/* Early clobber, to prevent reg reuse */
+	: "r"(ptr),	/* Not "m": llock only supports reg direct addr mode */
+	  "ir"(expected),
+	  "r"(new)	/* can't be "ir". scond can't take LIMM for "b" */
+	: "cc", "memory"); /* so that gcc knows memory is being written here */
+
+	smp_mb();
 
 	return prev;
 }
@@ -42,6 +53,9 @@ __cmpxchg(volatile void *ptr, unsigned long expected, unsigned long new)
 	int prev;
 	volatile unsigned long *p = ptr;
 
+	/*
+	 * spin lock/unlock provide the needed smp_mb() before/after
+	 */
 	atomic_ops_lock(flags);
 	prev = *p;
 	if (prev == expected)
@@ -77,12 +91,16 @@ static inline unsigned long __xchg(unsigned long val, volatile void *ptr,
 
 	switch (size) {
 	case 4:
+		smp_mb();
+
 		__asm__ __volatile__(
 		"	ex  %0, [%1]	\n"
 		: "+r"(val)
 		: "r"(ptr)
 		: "memory");
 
+		smp_mb();
+
 		return val;
 	}
 	return __xchg_bad_pointer();

arch/arc/include/asm/spinlock.h

@@ -22,24 +22,46 @@ static inline void arch_spin_lock(arch_spinlock_t *lock)
 {
 	unsigned int tmp = __ARCH_SPIN_LOCK_LOCKED__;
 
+	/*
+	 * This smp_mb() is technically superfluous, we only need the one
+	 * after the lock for providing the ACQUIRE semantics.
+	 * However doing the "right" thing was regressing hackbench
+	 * so keeping this, pending further investigation
+	 */
+	smp_mb();
+
 	__asm__ __volatile__(
 	"1:	ex  %0, [%1]		\n"
 	"	breq  %0, %2, 1b	\n"
 	: "+&r" (tmp)
 	: "r"(&(lock->slock)), "ir"(__ARCH_SPIN_LOCK_LOCKED__)
 	: "memory");
+
+	/*
+	 * ACQUIRE barrier to ensure load/store after taking the lock
+	 * don't "bleed-up" out of the critical section (leak-in is allowed)
+	 * http://www.spinics.net/lists/kernel/msg2010409.html
+	 *
+	 * ARCv2 only has load-load, store-store and all-all barrier
+	 * thus need the full all-all barrier
+	 */
+	smp_mb();
 }
 
 static inline int arch_spin_trylock(arch_spinlock_t *lock)
 {
 	unsigned int tmp = __ARCH_SPIN_LOCK_LOCKED__;
 
+	smp_mb();
+
 	__asm__ __volatile__(
 	"1:	ex  %0, [%1]		\n"
 	: "+r" (tmp)
 	: "r"(&(lock->slock))
 	: "memory");
 
+	smp_mb();
+
 	return (tmp == __ARCH_SPIN_LOCK_UNLOCKED__);
 }
 
@@ -47,12 +69,22 @@ static inline void arch_spin_unlock(arch_spinlock_t *lock)
 {
 	unsigned int tmp = __ARCH_SPIN_LOCK_UNLOCKED__;
 
+	/*
+	 * RELEASE barrier: given the instructions avail on ARCv2, full barrier
+	 * is the only option
+	 */
+	smp_mb();
+
 	__asm__ __volatile__(
 	"	ex  %0, [%1]		\n"
 	: "+r" (tmp)
 	: "r"(&(lock->slock))
 	: "memory");
 
+	/*
+	 * superfluous, but keeping for now - see pairing version in
+	 * arch_spin_lock above
+	 */
 	smp_mb();
 }
 

arch/arc/kernel/perf_event.c

@@ -266,7 +266,6 @@ static int arc_pmu_add(struct perf_event *event, int flags)
 
 static int arc_pmu_device_probe(struct platform_device *pdev)
 {
-	struct arc_pmu *arc_pmu;
 	struct arc_reg_pct_build pct_bcr;
 	struct arc_reg_cc_build cc_bcr;
 	int i, j, ret;

arch/arm/boot/dts/armada-370-xp.dtsi

@@ -270,7 +270,6 @@
 			};
 
 			eth0: ethernet@70000 {
-				compatible = "marvell,armada-370-neta";
 				reg = <0x70000 0x4000>;
 				interrupts = <8>;
 				clocks = <&gateclk 4>;
@@ -286,7 +285,6 @@
 			};
 
 			eth1: ethernet@74000 {
-				compatible = "marvell,armada-370-neta";
 				reg = <0x74000 0x4000>;
 				interrupts = <10>;
 				clocks = <&gateclk 3>;

arch/arm/boot/dts/armada-370.dtsi

@@ -307,6 +307,14 @@
 					dmacap,memset;
 				};
 			};
+
+			ethernet@70000 {
+				compatible = "marvell,armada-370-neta";
+			};
+
+			ethernet@74000 {
+				compatible = "marvell,armada-370-neta";
+			};
 		};
 	};
 };

arch/arm/boot/dts/armada-xp-mv78260.dtsi

@@ -318,7 +318,7 @@
 			};
 
 			eth3: ethernet@34000 {
-				compatible = "marvell,armada-370-neta";
+				compatible = "marvell,armada-xp-neta";
 				reg = <0x34000 0x4000>;
 				interrupts = <14>;
 				clocks = <&gateclk 1>;

arch/arm/boot/dts/armada-xp-mv78460.dtsi

@@ -356,7 +356,7 @@
 			};
 
 			eth3: ethernet@34000 {
-				compatible = "marvell,armada-370-neta";
+				compatible = "marvell,armada-xp-neta";
 				reg = <0x34000 0x4000>;
 				interrupts = <14>;
 				clocks = <&gateclk 1>;

arch/arm/boot/dts/armada-xp.dtsi

@@ -177,7 +177,7 @@
 			};
 
 			eth2: ethernet@30000 {
-				compatible = "marvell,armada-370-neta";
+				compatible = "marvell,armada-xp-neta";
 				reg = <0x30000 0x4000>;
 				interrupts = <12>;
 				clocks = <&gateclk 2>;
@@ -220,6 +220,14 @@
 				};
 			};
 
+			ethernet@70000 {
+				compatible = "marvell,armada-xp-neta";
+			};
+
+			ethernet@74000 {
+				compatible = "marvell,armada-xp-neta";
+			};
+
 			xor@f0900 {
 				compatible = "marvell,orion-xor";
 				reg = <0xF0900 0x100

arch/arm/boot/dts/sun5i-a10s.dtsi

@@ -573,7 +573,7 @@
 		};
 
 		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-a10-ts";
+			compatible = "allwinner,sun5i-a13-ts";
 			reg = <0x01c25000 0x100>;
 			interrupts = <29>;
 			#thermal-sensor-cells = <0>;

arch/arm/boot/dts/sun5i-a13.dtsi

@@ -555,7 +555,7 @@
 		};
 
 		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-a10-ts";
+			compatible = "allwinner,sun5i-a13-ts";
 			reg = <0x01c25000 0x100>;
 			interrupts = <29>;
 			#thermal-sensor-cells = <0>;

arch/arm/boot/dts/sun7i-a20.dtsi

@@ -1042,7 +1042,7 @@
 		};
 
 		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-a10-ts";
+			compatible = "allwinner,sun5i-a13-ts";
 			reg = <0x01c25000 0x100>;
 			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 			#thermal-sensor-cells = <0>;

arch/arm/kvm/interrupts.S

@@ -170,13 +170,9 @@ __kvm_vcpu_return:
 	@ Don't trap coprocessor accesses for host kernel
 	set_hstr vmexit
 	set_hdcr vmexit
-	set_hcptr vmexit, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11))
+	set_hcptr vmexit, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11)), after_vfp_restore
 
 #ifdef CONFIG_VFPv3
-	@ Save floating point registers we if let guest use them.
-	tst	r2, #(HCPTR_TCP(10) | HCPTR_TCP(11))
-	bne	after_vfp_restore
-
 	@ Switch VFP/NEON hardware state to the host's
 	add	r7, vcpu, #VCPU_VFP_GUEST
 	store_vfp_state r7
@@ -188,6 +184,8 @@ after_vfp_restore:
 	@ Restore FPEXC_EN which we clobbered on entry
 	pop	{r2}
 	VFPFMXR FPEXC, r2
+#else
+after_vfp_restore:
 #endif
 
 	@ Reset Hyp-role
@@ -483,7 +481,7 @@ switch_to_guest_vfp:
 	push	{r3-r7}
 
 	@ NEON/VFP used.  Turn on VFP access.
-	set_hcptr vmexit, (HCPTR_TCP(10) | HCPTR_TCP(11))
+	set_hcptr vmtrap, (HCPTR_TCP(10) | HCPTR_TCP(11))
 
 	@ Switch VFP/NEON hardware state to the guest's
 	add	r7, r0, #VCPU_VFP_HOST

arch/arm/kvm/interrupts_head.S

@@ -591,8 +591,13 @@ ARM_BE8(rev	r6, r6  )
 .endm
 
 /* Configures the HCPTR (Hyp Coprocessor Trap Register) on entry/return
- * (hardware reset value is 0). Keep previous value in r2. */
-.macro set_hcptr operation, mask
+ * (hardware reset value is 0). Keep previous value in r2.
+ * An ISB is emited on vmexit/vmtrap, but executed on vmexit only if
+ * VFP wasn't already enabled (always executed on vmtrap).
+ * If a label is specified with vmexit, it is branched to if VFP wasn't
+ * enabled.
+ */
+.macro set_hcptr operation, mask, label = none
 	mrc	p15, 4, r2, c1, c1, 2
 	ldr	r3, =\mask
 	.if \operation == vmentry
@@ -601,6 +606,17 @@ ARM_BE8(rev	r6, r6  )
 	bic	r3, r2, r3		@ Don't trap defined coproc-accesses
 	.endif
 	mcr	p15, 4, r3, c1, c1, 2
+	.if \operation != vmentry
+	.if \operation == vmexit
+	tst	r2, #(HCPTR_TCP(10) | HCPTR_TCP(11))
+	beq	1f
+	.endif
+	isb
+	.if \label != none
+	b	\label
+	.endif
+1:
+	.endif
 .endm
 
 /* Configures the HDCR (Hyp Debug Configuration Register) on entry/return

arch/arm/kvm/psci.c

@@ -230,10 +230,6 @@ static int kvm_psci_0_2_call(struct kvm_vcpu *vcpu)
 	case PSCI_0_2_FN64_AFFINITY_INFO:
 		val = kvm_psci_vcpu_affinity_info(vcpu);
 		break;
-	case PSCI_0_2_FN_MIGRATE:
-	case PSCI_0_2_FN64_MIGRATE:
-		val = PSCI_RET_NOT_SUPPORTED;
-		break;
 	case PSCI_0_2_FN_MIGRATE_INFO_TYPE:
 		/*
 		 * Trusted OS is MP hence does not require migration
@@ -242,10 +238,6 @@ static int kvm_psci_0_2_call(struct kvm_vcpu *vcpu)
 		 */
 		val = PSCI_0_2_TOS_MP;
 		break;
-	case PSCI_0_2_FN_MIGRATE_INFO_UP_CPU:
-	case PSCI_0_2_FN64_MIGRATE_INFO_UP_CPU:
-		val = PSCI_RET_NOT_SUPPORTED;
-		break;
 	case PSCI_0_2_FN_SYSTEM_OFF:
 		kvm_psci_system_off(vcpu);
 		/*
@@ -271,7 +263,8 @@ static int kvm_psci_0_2_call(struct kvm_vcpu *vcpu)
 		ret = 0;
 		break;
 	default:
-		return -EINVAL;
+		val = PSCI_RET_NOT_SUPPORTED;
+		break;
 	}
 
 	*vcpu_reg(vcpu, 0) = val;
@@ -291,12 +284,9 @@ static int kvm_psci_0_1_call(struct kvm_vcpu *vcpu)
 	case KVM_PSCI_FN_CPU_ON:
 		val = kvm_psci_vcpu_on(vcpu);
 		break;
-	case KVM_PSCI_FN_CPU_SUSPEND:
-	case KVM_PSCI_FN_MIGRATE:
+	default:
 		val = PSCI_RET_NOT_SUPPORTED;
 		break;
-	default:
-		return -EINVAL;
 	}
 
 	*vcpu_reg(vcpu, 0) = val;

arch/arm/mach-imx/clk-imx6q.c

@@ -443,7 +443,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[IMX6QDL_CLK_GPMI_IO]      = imx_clk_gate2("gpmi_io",       "enfc",              base + 0x78, 28);
 	clk[IMX6QDL_CLK_GPMI_APB]     = imx_clk_gate2("gpmi_apb",      "usdhc3",            base + 0x78, 30);
 	clk[IMX6QDL_CLK_ROM]          = imx_clk_gate2("rom",           "ahb",               base + 0x7c, 0);
-	clk[IMX6QDL_CLK_SATA]         = imx_clk_gate2("sata",          "ipg",               base + 0x7c, 4);
+	clk[IMX6QDL_CLK_SATA]         = imx_clk_gate2("sata",          "ahb",               base + 0x7c, 4);
 	clk[IMX6QDL_CLK_SDMA]         = imx_clk_gate2("sdma",          "ahb",               base + 0x7c, 6);
 	clk[IMX6QDL_CLK_SPBA]         = imx_clk_gate2("spba",          "ipg",               base + 0x7c, 12);
 	clk[IMX6QDL_CLK_SPDIF]        = imx_clk_gate2("spdif",         "spdif_podf",        base + 0x7c, 14);

arch/arm/mach-mvebu/pm-board.c

@@ -43,6 +43,9 @@ static void mvebu_armada_xp_gp_pm_enter(void __iomem *sdram_reg, u32 srcmd)
 	for (i = 0; i < ARMADA_XP_GP_PIC_NR_GPIOS; i++)
 		ackcmd |= BIT(pic_raw_gpios[i]);
 
+	srcmd = cpu_to_le32(srcmd);
+	ackcmd = cpu_to_le32(ackcmd);
+
 	/*
 	 * Wait a while, the PIC needs quite a bit of time between the
 	 * two GPIO commands.

arch/arm/mach-tegra/cpuidle-tegra20.c

@@ -34,6 +34,7 @@
 #include "iomap.h"
 #include "irq.h"
 #include "pm.h"
+#include "reset.h"
 #include "sleep.h"
 
 #ifdef CONFIG_PM_SLEEP
@@ -70,15 +71,13 @@ static struct cpuidle_driver tegra_idle_driver = {
 
 #ifdef CONFIG_PM_SLEEP
 #ifdef CONFIG_SMP
-static void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE);
-
 static int tegra20_reset_sleeping_cpu_1(void)
 {
 	int ret = 0;
 
 	tegra_pen_lock();
 
-	if (readl(pmc + PMC_SCRATCH41) == CPU_RESETTABLE)
+	if (readb(tegra20_cpu1_resettable_status) == CPU_RESETTABLE)
 		tegra20_cpu_shutdown(1);
 	else
 		ret = -EINVAL;

arch/arm/mach-tegra/reset-handler.S

@@ -169,10 +169,10 @@ after_errata:
 	cmp	r6, #TEGRA20
 	bne	1f
 	/* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */
-	mov32	r5, TEGRA_PMC_BASE
-	mov	r0, #0
+	mov32	r5, TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET
+	mov	r0, #CPU_NOT_RESETTABLE
 	cmp	r10, #0
-	strne	r0, [r5, #PMC_SCRATCH41]
+	strneb	r0, [r5, #__tegra20_cpu1_resettable_status_offset]
 1:
 #endif
 
@@ -281,6 +281,10 @@ __tegra_cpu_reset_handler_data:
 	.rept	TEGRA_RESET_DATA_SIZE
 	.long	0
 	.endr
+	.globl	__tegra20_cpu1_resettable_status_offset
+	.equ	__tegra20_cpu1_resettable_status_offset, \
+					. - __tegra_cpu_reset_handler_start
+	.byte	0
 	.align L1_CACHE_SHIFT
 
 ENTRY(__tegra_cpu_reset_handler_end)

arch/arm/mach-tegra/reset.h

@@ -35,6 +35,7 @@ extern unsigned long __tegra_cpu_reset_handler_data[TEGRA_RESET_DATA_SIZE];
 
 void __tegra_cpu_reset_handler_start(void);
 void __tegra_cpu_reset_handler(void);
+void __tegra20_cpu1_resettable_status_offset(void);
 void __tegra_cpu_reset_handler_end(void);
 void tegra_secondary_startup(void);
 
@@ -47,6 +48,9 @@ void tegra_secondary_startup(void);
 	(IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \
 	((u32)&__tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_LP2] - \
 	 (u32)__tegra_cpu_reset_handler_start)))
+#define tegra20_cpu1_resettable_status \
+	(IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \
+	 (u32)__tegra20_cpu1_resettable_status_offset))
 #endif
 
 #define tegra_cpu_reset_handler_offset \

arch/arm/mach-tegra/sleep-tegra20.S

@@ -97,9 +97,10 @@ ENDPROC(tegra20_hotplug_shutdown)
 ENTRY(tegra20_cpu_shutdown)
 	cmp	r0, #0
 	reteq	lr			@ must not be called for CPU 0
-	mov32	r1, TEGRA_PMC_VIRT + PMC_SCRATCH41
+	mov32	r1, TEGRA_IRAM_RESET_BASE_VIRT
+	ldr	r2, =__tegra20_cpu1_resettable_status_offset
 	mov	r12, #CPU_RESETTABLE
-	str	r12, [r1]
+	strb	r12, [r1, r2]
 
 	cpu_to_halt_reg r1, r0
 	ldr	r3, =TEGRA_FLOW_CTRL_VIRT
@@ -182,38 +183,41 @@ ENDPROC(tegra_pen_unlock)
 /*
  * tegra20_cpu_clear_resettable(void)
  *
- * Called to clear the "resettable soon" flag in PMC_SCRATCH41 when
+ * Called to clear the "resettable soon" flag in IRAM variable when
  * it is expected that the secondary CPU will be idle soon.
  */
 ENTRY(tegra20_cpu_clear_resettable)
-	mov32	r1, TEGRA_PMC_VIRT + PMC_SCRATCH41
+	mov32	r1, TEGRA_IRAM_RESET_BASE_VIRT
+	ldr	r2, =__tegra20_cpu1_resettable_status_offset
 	mov	r12, #CPU_NOT_RESETTABLE
-	str	r12, [r1]
+	strb	r12, [r1, r2]
 	ret	lr
 ENDPROC(tegra20_cpu_clear_resettable)
 
 /*
  * tegra20_cpu_set_resettable_soon(void)
  *
- * Called to set the "resettable soon" flag in PMC_SCRATCH41 when
+ * Called to set the "resettable soon" flag in IRAM variable when
  * it is expected that the secondary CPU will be idle soon.
  */
 ENTRY(tegra20_cpu_set_resettable_soon)
-	mov32	r1, TEGRA_PMC_VIRT + PMC_SCRATCH41
+	mov32	r1, TEGRA_IRAM_RESET_BASE_VIRT
+	ldr	r2, =__tegra20_cpu1_resettable_status_offset
 	mov	r12, #CPU_RESETTABLE_SOON
-	str	r12, [r1]
+	strb	r12, [r1, r2]
 	ret	lr
 ENDPROC(tegra20_cpu_set_resettable_soon)
 
 /*
  * tegra20_cpu_is_resettable_soon(void)
  *
- * Returns true if the "resettable soon" flag in PMC_SCRATCH41 has been
+ * Returns true if the "resettable soon" flag in IRAM variable has been
  * set because it is expected that the secondary CPU will be idle soon.
  */
 ENTRY(tegra20_cpu_is_resettable_soon)
-	mov32	r1, TEGRA_PMC_VIRT + PMC_SCRATCH41
-	ldr	r12, [r1]
+	mov32	r1, TEGRA_IRAM_RESET_BASE_VIRT
+	ldr	r2, =__tegra20_cpu1_resettable_status_offset
+	ldrb	r12, [r1, r2]
 	cmp	r12, #CPU_RESETTABLE_SOON
 	moveq	r0, #1
 	movne	r0, #0
@@ -256,9 +260,10 @@ ENTRY(tegra20_sleep_cpu_secondary_finish)
 	mov	r0, #TEGRA_FLUSH_CACHE_LOUIS
 	bl	tegra_disable_clean_inv_dcache
 
-	mov32	r0, TEGRA_PMC_VIRT + PMC_SCRATCH41
+	mov32	r0, TEGRA_IRAM_RESET_BASE_VIRT
+	ldr	r4, =__tegra20_cpu1_resettable_status_offset
 	mov	r3, #CPU_RESETTABLE
-	str	r3, [r0]
+	strb	r3, [r0, r4]
 
 	bl	tegra_cpu_do_idle
 
@@ -274,10 +279,10 @@ ENTRY(tegra20_sleep_cpu_secondary_finish)
 
 	bl	tegra_pen_lock
 
-	mov32	r3, TEGRA_PMC_VIRT
-	add	r0, r3, #PMC_SCRATCH41
+	mov32	r0, TEGRA_IRAM_RESET_BASE_VIRT
+	ldr	r4, =__tegra20_cpu1_resettable_status_offset
 	mov	r3, #CPU_NOT_RESETTABLE
-	str	r3, [r0]
+	strb	r3, [r0, r4]
 
 	bl	tegra_pen_unlock
 

arch/arm/mach-tegra/sleep.h

@@ -18,6 +18,7 @@
 #define __MACH_TEGRA_SLEEP_H
 
 #include "iomap.h"
+#include "irammap.h"
 
 #define TEGRA_ARM_PERIF_VIRT (TEGRA_ARM_PERIF_BASE - IO_CPU_PHYS \
 					+ IO_CPU_VIRT)
@@ -29,6 +30,9 @@
 					+ IO_APB_VIRT)
 #define TEGRA_PMC_VIRT	(TEGRA_PMC_BASE - IO_APB_PHYS + IO_APB_VIRT)
 
+#define TEGRA_IRAM_RESET_BASE_VIRT (IO_IRAM_VIRT + \
+				TEGRA_IRAM_RESET_HANDLER_OFFSET)
+
 /* PMC_SCRATCH37-39 and 41 are used for tegra_pen_lock and idle */
 #define PMC_SCRATCH37	0x130
 #define PMC_SCRATCH38	0x134

arch/arm64/kernel/entry.S

@@ -517,6 +517,7 @@ el0_sp_pc:
 	mrs	x26, far_el1
 	// enable interrupts before calling the main handler
 	enable_dbg_and_irq
+	ct_user_exit
 	mov	x0, x26
 	mov	x1, x25
 	mov	x2, sp

arch/arm64/kernel/vdso/Makefile

@@ -15,6 +15,10 @@ ccflags-y := -shared -fno-common -fno-builtin
 ccflags-y += -nostdlib -Wl,-soname=linux-vdso.so.1 \
 		$(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
 
+# Workaround for bare-metal (ELF) toolchains that neglect to pass -shared
+# down to collect2, resulting in silent corruption of the vDSO image.
+ccflags-y += -Wl,-shared
+
 obj-y += vdso.o
 extra-y += vdso.lds vdso-offsets.h
 CPPFLAGS_vdso.lds += -P -C -U$(ARCH)

arch/arm64/mm/context.c

@@ -92,6 +92,14 @@ static void reset_context(void *info)
 	unsigned int cpu = smp_processor_id();
 	struct mm_struct *mm = current->active_mm;
 
+	/*
+	 * current->active_mm could be init_mm for the idle thread immediately
+	 * after secondary CPU boot or hotplug. TTBR0_EL1 is already set to
+	 * the reserved value, so no need to reset any context.
+	 */
+	if (mm == &init_mm)
+		return;
+
 	smp_rmb();
 	asid = cpu_last_asid + cpu;
 

arch/arm64/mm/init.c

@@ -262,7 +262,7 @@ static void __init free_unused_memmap(void)
 		 * memmap entries are valid from the bank end aligned to
 		 * MAX_ORDER_NR_PAGES.
 		 */
-		prev_end = ALIGN(start + __phys_to_pfn(reg->size),
+		prev_end = ALIGN(__phys_to_pfn(reg->base + reg->size),
 				 MAX_ORDER_NR_PAGES);
 	}
 

arch/mips/include/asm/mach-generic/spaces.h

@@ -94,7 +94,11 @@
 #endif
 
 #ifndef FIXADDR_TOP
+#ifdef CONFIG_KVM_GUEST
+#define FIXADDR_TOP		((unsigned long)(long)(int)0x7ffe0000)
+#else
 #define FIXADDR_TOP		((unsigned long)(long)(int)0xfffe0000)
 #endif
+#endif
 
 #endif /* __ASM_MACH_GENERIC_SPACES_H */

arch/mips/kvm/mips.c

@@ -982,7 +982,7 @@ int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm, struct kvm_dirty_log *log)
 
 	/* If nothing is dirty, don't bother messing with page tables. */
 	if (is_dirty) {
-		memslot = &kvm->memslots->memslots[log->slot];
+		memslot = id_to_memslot(kvm->memslots, log->slot);
 
 		ga = memslot->base_gfn << PAGE_SHIFT;
 		ga_end = ga + (memslot->npages << PAGE_SHIFT);

arch/powerpc/perf/core-book3s.c

@@ -131,7 +131,16 @@ static void pmao_restore_workaround(bool ebb) { }
 
 static bool regs_use_siar(struct pt_regs *regs)
 {
-	return !!regs->result;
+	/*
+	 * When we take a performance monitor exception the regs are setup
+	 * using perf_read_regs() which overloads some fields, in particular
+	 * regs->result to tell us whether to use SIAR.
+	 *
+	 * However if the regs are from another exception, eg. a syscall, then
+	 * they have not been setup using perf_read_regs() and so regs->result
+	 * is something random.
+	 */
+	return ((TRAP(regs) == 0xf00) && regs->result);
 }
 
 /*

arch/s390/hypfs/inode.c

@@ -456,8 +456,6 @@ static const struct super_operations hypfs_s_ops = {
 	.show_options	= hypfs_show_options,
 };
 
-static struct kobject *s390_kobj;
-
 static int __init hypfs_init(void)
 {
 	int rc;
@@ -481,18 +479,16 @@ static int __init hypfs_init(void)
 		rc = -ENODATA;
 		goto fail_hypfs_sprp_exit;
 	}
-	s390_kobj = kobject_create_and_add("s390", hypervisor_kobj);
-	if (!s390_kobj) {
-		rc = -ENOMEM;
+	rc = sysfs_create_mount_point(hypervisor_kobj, "s390");
+	if (rc)
 		goto fail_hypfs_diag0c_exit;
-	}
 	rc = register_filesystem(&hypfs_type);
 	if (rc)
 		goto fail_filesystem;
 	return 0;
 
 fail_filesystem:
-	kobject_put(s390_kobj);
+	sysfs_remove_mount_point(hypervisor_kobj, "s390");
 fail_hypfs_diag0c_exit:
 	hypfs_diag0c_exit();
 fail_hypfs_sprp_exit:
@@ -510,7 +506,7 @@ fail_dbfs_exit:
 static void __exit hypfs_exit(void)
 {
 	unregister_filesystem(&hypfs_type);
-	kobject_put(s390_kobj);
+	sysfs_remove_mount_point(hypervisor_kobj, "s390");
 	hypfs_diag0c_exit();
 	hypfs_sprp_exit();
 	hypfs_vm_exit();

arch/s390/kernel/crash_dump.c

@@ -415,7 +415,7 @@ static void *nt_s390_vx_low(void *ptr, __vector128 *vx_regs)
 	ptr += len;
 	/* Copy lower halves of SIMD registers 0-15 */
 	for (i = 0; i < 16; i++) {
-		memcpy(ptr, &vx_regs[i], 8);
+		memcpy(ptr, &vx_regs[i].u[2], 8);
 		ptr += 8;
 	}
 	return ptr;

arch/s390/kvm/interrupt.c

@@ -1061,7 +1061,7 @@ static int __inject_extcall(struct kvm_vcpu *vcpu, struct kvm_s390_irq *irq)
 	if (sclp_has_sigpif())
 		return __inject_extcall_sigpif(vcpu, src_id);
 
-	if (!test_and_set_bit(IRQ_PEND_EXT_EXTERNAL, &li->pending_irqs))
+	if (test_and_set_bit(IRQ_PEND_EXT_EXTERNAL, &li->pending_irqs))
 		return -EBUSY;
 	*extcall = irq->u.extcall;
 	atomic_set_mask(CPUSTAT_EXT_INT, li->cpuflags);
@@ -1606,6 +1606,9 @@ void kvm_s390_clear_float_irqs(struct kvm *kvm)
 	int i;
 
 	spin_lock(&fi->lock);
+	fi->pending_irqs = 0;
+	memset(&fi->srv_signal, 0, sizeof(fi->srv_signal));
+	memset(&fi->mchk, 0, sizeof(fi->mchk));
 	for (i = 0; i < FIRQ_LIST_COUNT; i++)
 		clear_irq_list(&fi->lists[i]);
 	for (i = 0; i < FIRQ_MAX_COUNT; i++)

arch/s390/net/bpf_jit_comp.c

@@ -227,7 +227,7 @@ static inline void reg_set_seen(struct bpf_jit *jit, u32 b1)
 ({								\
 	/* Branch instruction needs 6 bytes */			\
 	int rel = (addrs[i + off + 1] - (addrs[i + 1] - 6)) / 2;\
-	_EMIT6(op1 | reg(b1, b2) << 16 | rel, op2 | mask);	\
+	_EMIT6(op1 | reg(b1, b2) << 16 | (rel & 0xffff), op2 | mask);	\
 	REG_SET_SEEN(b1);					\
 	REG_SET_SEEN(b2);					\
 })

arch/x86/include/asm/kvm_host.h

@@ -591,7 +591,7 @@ struct kvm_arch {
 	struct kvm_pic *vpic;
 	struct kvm_ioapic *vioapic;
 	struct kvm_pit *vpit;
-	int vapics_in_nmi_mode;
+	atomic_t vapics_in_nmi_mode;
 	struct mutex apic_map_lock;
 	struct kvm_apic_map *apic_map;
 

arch/x86/kernel/cpu/perf_event.c

@@ -270,11 +270,7 @@ msr_fail:
 
 static void hw_perf_event_destroy(struct perf_event *event)
 {
-	if (atomic_dec_and_mutex_lock(&active_events, &pmc_reserve_mutex)) {
-		release_pmc_hardware();
-		release_ds_buffers();
-		mutex_unlock(&pmc_reserve_mutex);
-	}
+	x86_release_hardware();
 }
 
 void hw_perf_lbr_event_destroy(struct perf_event *event)
@@ -324,6 +320,35 @@ set_ext_hw_attr(struct hw_perf_event *hwc, struct perf_event *event)
 	return x86_pmu_extra_regs(val, event);
 }
 
+int x86_reserve_hardware(void)
+{
+	int err = 0;
+
+	if (!atomic_inc_not_zero(&active_events)) {
+		mutex_lock(&pmc_reserve_mutex);
+		if (atomic_read(&active_events) == 0) {
+			if (!reserve_pmc_hardware())
+				err = -EBUSY;
+			else
+				reserve_ds_buffers();
+		}
+		if (!err)
+			atomic_inc(&active_events);
+		mutex_unlock(&pmc_reserve_mutex);
+	}
+
+	return err;
+}
+
+void x86_release_hardware(void)
+{
+	if (atomic_dec_and_mutex_lock(&active_events, &pmc_reserve_mutex)) {
+		release_pmc_hardware();
+		release_ds_buffers();
+		mutex_unlock(&pmc_reserve_mutex);
+	}
+}
+
 /*
  * Check if we can create event of a certain type (that no conflicting events
  * are present).
@@ -336,9 +361,10 @@ int x86_add_exclusive(unsigned int what)
 		return 0;
 
 	mutex_lock(&pmc_reserve_mutex);
-	for (i = 0; i < ARRAY_SIZE(x86_pmu.lbr_exclusive); i++)
+	for (i = 0; i < ARRAY_SIZE(x86_pmu.lbr_exclusive); i++) {
 		if (i != what && atomic_read(&x86_pmu.lbr_exclusive[i]))
 			goto out;
+	}
 
 	atomic_inc(&x86_pmu.lbr_exclusive[what]);
 	ret = 0;
@@ -527,19 +553,7 @@ static int __x86_pmu_event_init(struct perf_event *event)
 	if (!x86_pmu_initialized())
 		return -ENODEV;
 
-	err = 0;
-	if (!atomic_inc_not_zero(&active_events)) {
-		mutex_lock(&pmc_reserve_mutex);
-		if (atomic_read(&active_events) == 0) {
-			if (!reserve_pmc_hardware())
-				err = -EBUSY;
-			else
-				reserve_ds_buffers();
-		}
-		if (!err)
-			atomic_inc(&active_events);
-		mutex_unlock(&pmc_reserve_mutex);
-	}
+	err = x86_reserve_hardware();
 	if (err)
 		return err;
 

arch/x86/kernel/cpu/perf_event.h

@@ -703,6 +703,10 @@ int x86_add_exclusive(unsigned int what);
 
 void x86_del_exclusive(unsigned int what);
 
+int x86_reserve_hardware(void);
+
+void x86_release_hardware(void);
+
 void hw_perf_lbr_event_destroy(struct perf_event *event);
 
 int x86_setup_perfctr(struct perf_event *event);

arch/x86/kernel/cpu/perf_event_intel.c

@@ -3253,6 +3253,8 @@ __init int intel_pmu_init(void)
 
 	case 61: /* 14nm Broadwell Core-M */
 	case 86: /* 14nm Broadwell Xeon D */
+	case 71: /* 14nm Broadwell + GT3e (Intel Iris Pro graphics) */
+	case 79: /* 14nm Broadwell Server */
 		x86_pmu.late_ack = true;
 		memcpy(hw_cache_event_ids, hsw_hw_cache_event_ids, sizeof(hw_cache_event_ids));
 		memcpy(hw_cache_extra_regs, hsw_hw_cache_extra_regs, sizeof(hw_cache_extra_regs));
@@ -3322,13 +3324,13 @@ __init int intel_pmu_init(void)
 		 * counter, so do not extend mask to generic counters
 		 */
 		for_each_event_constraint(c, x86_pmu.event_constraints) {
-			if (c->cmask != FIXED_EVENT_FLAGS
-			    || c->idxmsk64 == INTEL_PMC_MSK_FIXED_REF_CYCLES) {
-				continue;
+			if (c->cmask == FIXED_EVENT_FLAGS
+			    && c->idxmsk64 != INTEL_PMC_MSK_FIXED_REF_CYCLES) {
+				c->idxmsk64 |= (1ULL << x86_pmu.num_counters) - 1;
 			}
-
-			c->idxmsk64 |= (1ULL << x86_pmu.num_counters) - 1;
-			c->weight += x86_pmu.num_counters;
+			c->idxmsk64 &=
+				~(~0UL << (INTEL_PMC_IDX_FIXED + x86_pmu.num_counters_fixed));
+			c->weight = hweight64(c->idxmsk64);
 		}
 	}
 

arch/x86/kernel/cpu/perf_event_intel_bts.c

@@ -483,17 +483,26 @@ static int bts_event_add(struct perf_event *event, int mode)
 
 static void bts_event_destroy(struct perf_event *event)
 {
+	x86_release_hardware();
 	x86_del_exclusive(x86_lbr_exclusive_bts);
 }
 
 static int bts_event_init(struct perf_event *event)
 {
+	int ret;
+
 	if (event->attr.type != bts_pmu.type)
 		return -ENOENT;
 
 	if (x86_add_exclusive(x86_lbr_exclusive_bts))
 		return -EBUSY;
 
+	ret = x86_reserve_hardware();
+	if (ret) {
+		x86_del_exclusive(x86_lbr_exclusive_bts);
+		return ret;
+	}
+
 	event->destroy = bts_event_destroy;
 
 	return 0;

arch/x86/kernel/head_32.S

@@ -62,9 +62,16 @@
 #define PAGE_TABLE_SIZE(pages) ((pages) / PTRS_PER_PGD)
 #endif
 
-/* Number of possible pages in the lowmem region */
-LOWMEM_PAGES = (((1<<32) - __PAGE_OFFSET) >> PAGE_SHIFT)
-	
+/*
+ * Number of possible pages in the lowmem region.
+ *
+ * We shift 2 by 31 instead of 1 by 32 to the left in order to avoid a
+ * gas warning about overflowing shift count when gas has been compiled
+ * with only a host target support using a 32-bit type for internal
+ * representation.
+ */
+LOWMEM_PAGES = (((2<<31) - __PAGE_OFFSET) >> PAGE_SHIFT)
+
 /* Enough space to fit pagetables for the low memory linear map */
 MAPPING_BEYOND_END = PAGE_TABLE_SIZE(LOWMEM_PAGES) << PAGE_SHIFT
 

arch/x86/kvm/i8254.c

@@ -305,7 +305,7 @@ static void pit_do_work(struct kthread_work *work)
 		 * LVT0 to NMI delivery. Other PIC interrupts are just sent to
 		 * VCPU0, and only if its LVT0 is in EXTINT mode.
 		 */
-		if (kvm->arch.vapics_in_nmi_mode > 0)
+		if (atomic_read(&kvm->arch.vapics_in_nmi_mode) > 0)
 			kvm_for_each_vcpu(i, vcpu, kvm)
 				kvm_apic_nmi_wd_deliver(vcpu);
 	}

arch/x86/kvm/lapic.c

@@ -1250,10 +1250,10 @@ static void apic_manage_nmi_watchdog(struct kvm_lapic *apic, u32 lvt0_val)
 		if (!nmi_wd_enabled) {
 			apic_debug("Receive NMI setting on APIC_LVT0 "
 				   "for cpu %d\n", apic->vcpu->vcpu_id);
-			apic->vcpu->kvm->arch.vapics_in_nmi_mode++;
+			atomic_inc(&apic->vcpu->kvm->arch.vapics_in_nmi_mode);
 		}
 	} else if (nmi_wd_enabled)
-		apic->vcpu->kvm->arch.vapics_in_nmi_mode--;
+		atomic_dec(&apic->vcpu->kvm->arch.vapics_in_nmi_mode);
 }
 
 static int apic_reg_write(struct kvm_lapic *apic, u32 reg, u32 val)
@@ -1808,6 +1808,7 @@ void kvm_apic_post_state_restore(struct kvm_vcpu *vcpu,
 	apic_update_ppr(apic);
 	hrtimer_cancel(&apic->lapic_timer.timer);
 	apic_update_lvtt(apic);
+	apic_manage_nmi_watchdog(apic, kvm_apic_get_reg(apic, APIC_LVT0));
 	update_divide_count(apic);
 	start_apic_timer(apic);
 	apic->irr_pending = true;

arch/x86/kvm/svm.c

@@ -511,8 +511,10 @@ static void skip_emulated_instruction(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 
-	if (svm->vmcb->control.next_rip != 0)
+	if (svm->vmcb->control.next_rip != 0) {
+		WARN_ON(!static_cpu_has(X86_FEATURE_NRIPS));
 		svm->next_rip = svm->vmcb->control.next_rip;
+	}
 
 	if (!svm->next_rip) {
 		if (emulate_instruction(vcpu, EMULTYPE_SKIP) !=
@@ -4317,7 +4319,9 @@ static int svm_check_intercept(struct kvm_vcpu *vcpu,
 		break;
 	}
 
-	vmcb->control.next_rip  = info->next_rip;
+	/* TODO: Advertise NRIPS to guest hypervisor unconditionally */
+	if (static_cpu_has(X86_FEATURE_NRIPS))
+		vmcb->control.next_rip  = info->next_rip;
 	vmcb->control.exit_code = icpt_info.exit_code;
 	vmexit = nested_svm_exit_handled(svm);
 

arch/x86/pci/acpi.c

@@ -81,6 +81,17 @@ static const struct dmi_system_id pci_crs_quirks[] __initconst = {
 			DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"),
 		},
 	},
+	/* https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/931368 */
+	/* https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1033299 */
+	{
+		.callback = set_use_crs,
+		.ident = "Foxconn K8M890-8237A",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Foxconn"),
+			DMI_MATCH(DMI_BOARD_NAME, "K8M890-8237A"),
+			DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"),
+		},
+	},
 
 	/* Now for the blacklist.. */
 
@@ -121,8 +132,10 @@ void __init pci_acpi_crs_quirks(void)
 {
 	int year;
 
-	if (dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL) && year < 2008)
-		pci_use_crs = false;
+	if (dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL) && year < 2008) {
+		if (iomem_resource.end <= 0xffffffff)
+			pci_use_crs = false;
+	}
 
 	dmi_check_system(pci_crs_quirks);
 

drivers/acpi/bus.c

@@ -470,6 +470,16 @@ static int __init acpi_bus_init_irq(void)
 	return 0;
 }
 
+/**
+ * acpi_early_init - Initialize ACPICA and populate the ACPI namespace.
+ *
+ * The ACPI tables are accessible after this, but the handling of events has not
+ * been initialized and the global lock is not available yet, so AML should not
+ * be executed at this point.
+ *
+ * Doing this before switching the EFI runtime services to virtual mode allows
+ * the EfiBootServices memory to be freed slightly earlier on boot.
+ */
 void __init acpi_early_init(void)
 {
 	acpi_status status;
@@ -533,26 +543,42 @@ void __init acpi_early_init(void)
 		acpi_gbl_FADT.sci_interrupt = acpi_sci_override_gsi;
 	}
 #endif
+	return;
+
+ error0:
+	disable_acpi();
+}
+
+/**
+ * acpi_subsystem_init - Finalize the early initialization of ACPI.
+ *
+ * Switch over the platform to the ACPI mode (if possible), initialize the
+ * handling of ACPI events, install the interrupt and global lock handlers.
+ *
+ * Doing this too early is generally unsafe, but at the same time it needs to be
+ * done before all things that really depend on ACPI.  The right spot appears to
+ * be before finalizing the EFI initialization.
+ */
+void __init acpi_subsystem_init(void)
+{
+	acpi_status status;
+
+	if (acpi_disabled)
+		return;
 
 	status = acpi_enable_subsystem(~ACPI_NO_ACPI_ENABLE);
 	if (ACPI_FAILURE(status)) {
 		printk(KERN_ERR PREFIX "Unable to enable ACPI\n");
-		goto error0;
+		disable_acpi();
+	} else {
+		/*
+		 * If the system is using ACPI then we can be reasonably
+		 * confident that any regulators are managed by the firmware
+		 * so tell the regulator core it has everything it needs to
+		 * know.
+		 */
+		regulator_has_full_constraints();
 	}
-
-	/*
-	 * If the system is using ACPI then we can be reasonably
-	 * confident that any regulators are managed by the firmware
-	 * so tell the regulator core it has everything it needs to
-	 * know.
-	 */
-	regulator_has_full_constraints();
-
-	return;
-
-      error0:
-	disable_acpi();
-	return;
 }
 
 static int __init acpi_bus_init(void)

drivers/acpi/device_pm.c

@@ -953,6 +953,7 @@ EXPORT_SYMBOL_GPL(acpi_subsys_prepare);
  */
 void acpi_subsys_complete(struct device *dev)
 {
+	pm_generic_complete(dev);
 	/*
 	 * If the device had been runtime-suspended before the system went into
 	 * the sleep state it is going out of and it has never been resumed till

drivers/acpi/osl.c

@@ -175,11 +175,7 @@ static void __init acpi_request_region (struct acpi_generic_address *gas,
 	if (!addr || !length)
 		return;
 
-	/* Resources are never freed */
-	if (gas->space_id == ACPI_ADR_SPACE_SYSTEM_IO)
-		request_region(addr, length, desc);
-	else if (gas->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
-		request_mem_region(addr, length, desc);
+	acpi_reserve_region(addr, length, gas->space_id, 0, desc);
 }
 
 static void __init acpi_reserve_resources(void)

drivers/acpi/resource.c

@@ -26,6 +26,7 @@
 #include <linux/device.h>
 #include <linux/export.h>
 #include <linux/ioport.h>
+#include <linux/list.h>
 #include <linux/slab.h>
 
 #ifdef CONFIG_X86
@@ -621,3 +622,162 @@ int acpi_dev_filter_resource_type(struct acpi_resource *ares,
 	return (type & types) ? 0 : 1;
 }
 EXPORT_SYMBOL_GPL(acpi_dev_filter_resource_type);
+
+struct reserved_region {
+	struct list_head node;
+	u64 start;
+	u64 end;
+};
+
+static LIST_HEAD(reserved_io_regions);
+static LIST_HEAD(reserved_mem_regions);
+
+static int request_range(u64 start, u64 end, u8 space_id, unsigned long flags,
+			 char *desc)
+{
+	unsigned int length = end - start + 1;
+	struct resource *res;
+
+	res = space_id == ACPI_ADR_SPACE_SYSTEM_IO ?
+		request_region(start, length, desc) :
+		request_mem_region(start, length, desc);
+	if (!res)
+		return -EIO;
+
+	res->flags &= ~flags;
+	return 0;
+}
+
+static int add_region_before(u64 start, u64 end, u8 space_id,
+			     unsigned long flags, char *desc,
+			     struct list_head *head)
+{
+	struct reserved_region *reg;
+	int error;
+
+	reg = kmalloc(sizeof(*reg), GFP_KERNEL);
+	if (!reg)
+		return -ENOMEM;
+
+	error = request_range(start, end, space_id, flags, desc);
+	if (error)
+		return error;
+
+	reg->start = start;
+	reg->end = end;
+	list_add_tail(&reg->node, head);
+	return 0;
+}
+
+/**
+ * acpi_reserve_region - Reserve an I/O or memory region as a system resource.
+ * @start: Starting address of the region.
+ * @length: Length of the region.
+ * @space_id: Identifier of address space to reserve the region from.
+ * @flags: Resource flags to clear for the region after requesting it.
+ * @desc: Region description (for messages).
+ *
+ * Reserve an I/O or memory region as a system resource to prevent others from
+ * using it.  If the new region overlaps with one of the regions (in the given
+ * address space) already reserved by this routine, only the non-overlapping
+ * parts of it will be reserved.
+ *
+ * Returned is either 0 (success) or a negative error code indicating a resource
+ * reservation problem.  It is the code of the first encountered error, but the
+ * routine doesn't abort until it has attempted to request all of the parts of
+ * the new region that don't overlap with other regions reserved previously.
+ *
+ * The resources requested by this routine are never released.
+ */
+int acpi_reserve_region(u64 start, unsigned int length, u8 space_id,
+			unsigned long flags, char *desc)
+{
+	struct list_head *regions;
+	struct reserved_region *reg;
+	u64 end = start + length - 1;
+	int ret = 0, error = 0;
+
+	if (space_id == ACPI_ADR_SPACE_SYSTEM_IO)
+		regions = &reserved_io_regions;
+	else if (space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
+		regions = &reserved_mem_regions;
+	else
+		return -EINVAL;
+
+	if (list_empty(regions))
+		return add_region_before(start, end, space_id, flags, desc, regions);
+
+	list_for_each_entry(reg, regions, node)
+		if (reg->start == end + 1) {
+			/* The new region can be prepended to this one. */
+			ret = request_range(start, end, space_id, flags, desc);
+			if (!ret)
+				reg->start = start;
+
+			return ret;
+		} else if (reg->start > end) {
+			/* No overlap.  Add the new region here and get out. */
+			return add_region_before(start, end, space_id, flags,
+						 desc, &reg->node);
+		} else if (reg->end == start - 1) {
+			goto combine;
+		} else if (reg->end >= start) {
+			goto overlap;
+		}
+
+	/* The new region goes after the last existing one. */
+	return add_region_before(start, end, space_id, flags, desc, regions);
+
+ overlap:
+	/*
+	 * The new region overlaps an existing one.
+	 *
+	 * The head part of the new region immediately preceding the existing
+	 * overlapping one can be combined with it right away.
+	 */
+	if (reg->start > start) {
+		error = request_range(start, reg->start - 1, space_id, flags, desc);
+		if (error)
+			ret = error;
+		else
+			reg->start = start;
+	}
+
+ combine:
+	/*
+	 * The new region is adjacent to an existing one.  If it extends beyond
+	 * that region all the way to the next one, it is possible to combine
+	 * all three of them.
+	 */
+	while (reg->end < end) {
+		struct reserved_region *next = NULL;
+		u64 a = reg->end + 1, b = end;
+
+		if (!list_is_last(&reg->node, regions)) {
+			next = list_next_entry(reg, node);
+			if (next->start <= end)
+				b = next->start - 1;
+		}
+		error = request_range(a, b, space_id, flags, desc);
+		if (!error) {
+			if (next && next->start == b + 1) {
+				reg->end = next->end;
+				list_del(&next->node);
+				kfree(next);
+			} else {
+				reg->end = end;
+				break;
+			}
+		} else if (next) {
+			if (!ret)
+				ret = error;
+
+			reg = next;
+		} else {
+			break;
+		}
+	}
+
+	return ret ? ret : error;
+}
+EXPORT_SYMBOL_GPL(acpi_reserve_region);

drivers/base/regmap/regmap.c

@@ -945,11 +945,10 @@ EXPORT_SYMBOL_GPL(devm_regmap_init);
 static void regmap_field_init(struct regmap_field *rm_field,
 	struct regmap *regmap, struct reg_field reg_field)
 {
-	int field_bits = reg_field.msb - reg_field.lsb + 1;
 	rm_field->regmap = regmap;
 	rm_field->reg = reg_field.reg;
 	rm_field->shift = reg_field.lsb;
-	rm_field->mask = ((BIT(field_bits) - 1) << reg_field.lsb);
+	rm_field->mask = GENMASK(reg_field.msb, reg_field.lsb);
 	rm_field->id_size = reg_field.id_size;
 	rm_field->id_offset = reg_field.id_offset;
 }
@@ -2318,7 +2317,7 @@ int regmap_bulk_read(struct regmap *map, unsigned int reg, void *val,
 					  &ival);
 			if (ret != 0)
 				return ret;
-			memcpy(val + (i * val_bytes), &ival, val_bytes);
+			map->format.format_val(val + (i * val_bytes), ival, 0);
 		}
 	}
 

drivers/bluetooth/ath3k.c

@@ -80,6 +80,7 @@ static const struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x0489, 0xe057) },
 	{ USB_DEVICE(0x0489, 0xe056) },
 	{ USB_DEVICE(0x0489, 0xe05f) },
+	{ USB_DEVICE(0x0489, 0xe076) },
 	{ USB_DEVICE(0x0489, 0xe078) },
 	{ USB_DEVICE(0x04c5, 0x1330) },
 	{ USB_DEVICE(0x04CA, 0x3004) },
@@ -88,6 +89,7 @@ static const struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x04CA, 0x3007) },
 	{ USB_DEVICE(0x04CA, 0x3008) },
 	{ USB_DEVICE(0x04CA, 0x300b) },
+	{ USB_DEVICE(0x04CA, 0x300d) },
 	{ USB_DEVICE(0x04CA, 0x300f) },
 	{ USB_DEVICE(0x04CA, 0x3010) },
 	{ USB_DEVICE(0x0930, 0x0219) },
@@ -113,6 +115,7 @@ static const struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3408) },
 	{ USB_DEVICE(0x13d3, 0x3423) },
 	{ USB_DEVICE(0x13d3, 0x3432) },
+	{ USB_DEVICE(0x13d3, 0x3474) },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE02C) },
@@ -137,6 +140,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
@@ -145,6 +149,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x300d), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
@@ -170,6 +175,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU22 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE036), .driver_info = BTUSB_ATH3012 },

drivers/bluetooth/btusb.c

@@ -178,6 +178,7 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
@@ -186,6 +187,7 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x300d), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
@@ -211,6 +213,7 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },

drivers/cpufreq/intel_pstate.c

@@ -535,7 +535,7 @@ static void byt_set_pstate(struct cpudata *cpudata, int pstate)
 
 	val |= vid;
 
-	wrmsrl(MSR_IA32_PERF_CTL, val);
+	wrmsrl_on_cpu(cpudata->cpu, MSR_IA32_PERF_CTL, val);
 }
 
 #define BYT_BCLK_FREQS 5

drivers/cpuidle/cpuidle-powernv.c

@@ -60,6 +60,8 @@ static int nap_loop(struct cpuidle_device *dev,
 	return index;
 }
 
+/* Register for fastsleep only in oneshot mode of broadcast */
+#ifdef CONFIG_TICK_ONESHOT
 static int fastsleep_loop(struct cpuidle_device *dev,
 				struct cpuidle_driver *drv,
 				int index)
@@ -83,7 +85,7 @@ static int fastsleep_loop(struct cpuidle_device *dev,
 
 	return index;
 }
-
+#endif
 /*
  * States for dedicated partition case.
  */
@@ -209,7 +211,14 @@ static int powernv_add_idle_states(void)
 			powernv_states[nr_idle_states].flags = 0;
 			powernv_states[nr_idle_states].target_residency = 100;
 			powernv_states[nr_idle_states].enter = &nap_loop;
-		} else if (flags[i] & OPAL_PM_SLEEP_ENABLED ||
+		}
+
+		/*
+		 * All cpuidle states with CPUIDLE_FLAG_TIMER_STOP set must come
+		 * within this config dependency check.
+		 */
+#ifdef CONFIG_TICK_ONESHOT
+		if (flags[i] & OPAL_PM_SLEEP_ENABLED ||
 			flags[i] & OPAL_PM_SLEEP_ENABLED_ER1) {
 			/* Add FASTSLEEP state */
 			strcpy(powernv_states[nr_idle_states].name, "FastSleep");
@@ -218,7 +227,7 @@ static int powernv_add_idle_states(void)
 			powernv_states[nr_idle_states].target_residency = 300000;
 			powernv_states[nr_idle_states].enter = &fastsleep_loop;
 		}
-
+#endif
 		powernv_states[nr_idle_states].exit_latency =
 				((unsigned int)latency_ns[i]) / 1000;
 

drivers/crypto/talitos.c

@@ -925,7 +925,8 @@ static int sg_to_link_tbl(struct scatterlist *sg, int sg_count,
 		sg_count--;
 		link_tbl_ptr--;
 	}
-	be16_add_cpu(&link_tbl_ptr->len, cryptlen);
+	link_tbl_ptr->len = cpu_to_be16(be16_to_cpu(link_tbl_ptr->len)
+					+ cryptlen);
 
 	/* tag end of link table */
 	link_tbl_ptr->j_extent = DESC_PTR_LNKTBL_RETURN;
@@ -2561,6 +2562,7 @@ static struct talitos_crypto_alg *talitos_alg_alloc(struct device *dev,
 		break;
 	default:
 		dev_err(dev, "unknown algorithm type %d\n", t_alg->algt.type);
+		kfree(t_alg);
 		return ERR_PTR(-EINVAL);
 	}
 

drivers/firmware/efi/efi.c

@@ -65,7 +65,6 @@ static int __init parse_efi_cmdline(char *str)
 early_param("efi", parse_efi_cmdline);
 
 static struct kobject *efi_kobj;
-static struct kobject *efivars_kobj;
 
 /*
  * Let's not leave out systab information that snuck into
@@ -212,10 +211,9 @@ static int __init efisubsys_init(void)
 		goto err_remove_group;
 
 	/* and the standard mountpoint for efivarfs */
-	efivars_kobj = kobject_create_and_add("efivars", efi_kobj);
-	if (!efivars_kobj) {
+	error = sysfs_create_mount_point(efi_kobj, "efivars");
+	if (error) {
 		pr_err("efivars: Subsystem registration failed.\n");
-		error = -ENOMEM;
 		goto err_remove_group;
 	}
 

drivers/gpio/gpio-crystalcove.c

@@ -255,6 +255,7 @@ static struct irq_chip crystalcove_irqchip = {
 	.irq_set_type		= crystalcove_irq_type,
 	.irq_bus_lock		= crystalcove_bus_lock,
 	.irq_bus_sync_unlock	= crystalcove_bus_sync_unlock,
+	.flags			= IRQCHIP_SKIP_SET_WAKE,
 };
 
 static irqreturn_t crystalcove_gpio_irq_handler(int irq, void *data)

drivers/gpio/gpio-rcar.c

@@ -177,8 +177,17 @@ static int gpio_rcar_irq_set_wake(struct irq_data *d, unsigned int on)
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
 	struct gpio_rcar_priv *p = container_of(gc, struct gpio_rcar_priv,
 						gpio_chip);
+	int error;
 
-	irq_set_irq_wake(p->irq_parent, on);
+	if (p->irq_parent) {
+		error = irq_set_irq_wake(p->irq_parent, on);
+		if (error) {
+			dev_dbg(&p->pdev->dev,
+				"irq %u doesn't support irq_set_wake\n",
+				p->irq_parent);
+			p->irq_parent = 0;
+		}
+	}
 
 	if (!p->clk)
 		return 0;

drivers/iio/accel/kxcjk-1013.c

@@ -1418,6 +1418,7 @@ static const struct dev_pm_ops kxcjk1013_pm_ops = {
 static const struct acpi_device_id kx_acpi_match[] = {
 	{"KXCJ1013", KXCJK1013},
 	{"KXCJ1008", KXCJ91008},
+	{"KXCJ9000", KXCJ91008},
 	{"KXTJ1009", KXTJ21009},
 	{"SMO8500",  KXCJ91008},
 	{ },

drivers/infiniband/ulp/srp/ib_srp.c

@@ -465,14 +465,13 @@ static struct srp_fr_pool *srp_alloc_fr_pool(struct srp_target_port *target)
  */
 static void srp_destroy_qp(struct srp_rdma_ch *ch)
 {
-	struct srp_target_port *target = ch->target;
 	static struct ib_qp_attr attr = { .qp_state = IB_QPS_ERR };
 	static struct ib_recv_wr wr = { .wr_id = SRP_LAST_WR_ID };
 	struct ib_recv_wr *bad_wr;
 	int ret;
 
 	/* Destroying a QP and reusing ch->done is only safe if not connected */
-	WARN_ON_ONCE(target->connected);
+	WARN_ON_ONCE(ch->connected);
 
 	ret = ib_modify_qp(ch->qp, &attr, IB_QP_STATE);
 	WARN_ONCE(ret, "ib_cm_init_qp_attr() returned %d\n", ret);
@@ -811,35 +810,19 @@ static bool srp_queue_remove_work(struct srp_target_port *target)
 	return changed;
 }
 
-static bool srp_change_conn_state(struct srp_target_port *target,
-				  bool connected)
-{
-	bool changed = false;
-
-	spin_lock_irq(&target->lock);
-	if (target->connected != connected) {
-		target->connected = connected;
-		changed = true;
-	}
-	spin_unlock_irq(&target->lock);
-
-	return changed;
-}
-
 static void srp_disconnect_target(struct srp_target_port *target)
 {
 	struct srp_rdma_ch *ch;
 	int i;
 
-	if (srp_change_conn_state(target, false)) {
-		/* XXX should send SRP_I_LOGOUT request */
+	/* XXX should send SRP_I_LOGOUT request */
 
-		for (i = 0; i < target->ch_count; i++) {
-			ch = &target->ch[i];
-			if (ch->cm_id && ib_send_cm_dreq(ch->cm_id, NULL, 0)) {
-				shost_printk(KERN_DEBUG, target->scsi_host,
-					     PFX "Sending CM DREQ failed\n");
-			}
+	for (i = 0; i < target->ch_count; i++) {
+		ch = &target->ch[i];
+		ch->connected = false;
+		if (ch->cm_id && ib_send_cm_dreq(ch->cm_id, NULL, 0)) {
+			shost_printk(KERN_DEBUG, target->scsi_host,
+				     PFX "Sending CM DREQ failed\n");
 		}
 	}
 }
@@ -986,14 +969,26 @@ static void srp_rport_delete(struct srp_rport *rport)
 	srp_queue_remove_work(target);
 }
 
+/**
+ * srp_connected_ch() - number of connected channels
+ * @target: SRP target port.
+ */
+static int srp_connected_ch(struct srp_target_port *target)
+{
+	int i, c = 0;
+
+	for (i = 0; i < target->ch_count; i++)
+		c += target->ch[i].connected;
+
+	return c;
+}
+
 static int srp_connect_ch(struct srp_rdma_ch *ch, bool multich)
 {
 	struct srp_target_port *target = ch->target;
 	int ret;
 
-	WARN_ON_ONCE(!multich && target->connected);
-
-	target->qp_in_error = false;
+	WARN_ON_ONCE(!multich && srp_connected_ch(target) > 0);
 
 	ret = srp_lookup_path(ch);
 	if (ret)
@@ -1016,7 +1011,7 @@ static int srp_connect_ch(struct srp_rdma_ch *ch, bool multich)
 		 */
 		switch (ch->status) {
 		case 0:
-			srp_change_conn_state(target, true);
+			ch->connected = true;
 			return 0;
 
 		case SRP_PORT_REDIRECT:
@@ -1243,13 +1238,13 @@ static int srp_rport_reconnect(struct srp_rport *rport)
 		for (j = 0; j < target->queue_size; ++j)
 			list_add(&ch->tx_ring[j]->list, &ch->free_tx);
 	}
+
+	target->qp_in_error = false;
+
 	for (i = 0; i < target->ch_count; i++) {
 		ch = &target->ch[i];
-		if (ret || !ch->target) {
-			if (i > 1)
-				ret = 0;
+		if (ret || !ch->target)
 			break;
-		}
 		ret = srp_connect_ch(ch, multich);
 		multich = true;
 	}
@@ -1929,7 +1924,7 @@ static void srp_handle_qp_err(u64 wr_id, enum ib_wc_status wc_status,
 		return;
 	}
 
-	if (target->connected && !target->qp_in_error) {
+	if (ch->connected && !target->qp_in_error) {
 		if (wr_id & LOCAL_INV_WR_ID_MASK) {
 			shost_printk(KERN_ERR, target->scsi_host, PFX
 				     "LOCAL_INV failed with status %d\n",
@@ -2367,7 +2362,7 @@ static int srp_cm_handler(struct ib_cm_id *cm_id, struct ib_cm_event *event)
 	case IB_CM_DREQ_RECEIVED:
 		shost_printk(KERN_WARNING, target->scsi_host,
 			     PFX "DREQ received - connection closed\n");
-		srp_change_conn_state(target, false);
+		ch->connected = false;
 		if (ib_send_cm_drep(cm_id, NULL, 0))
 			shost_printk(KERN_ERR, target->scsi_host,
 				     PFX "Sending CM DREP failed\n");
@@ -2423,7 +2418,7 @@ static int srp_send_tsk_mgmt(struct srp_rdma_ch *ch, u64 req_tag,
 	struct srp_iu *iu;
 	struct srp_tsk_mgmt *tsk_mgmt;
 
-	if (!target->connected || target->qp_in_error)
+	if (!ch->connected || target->qp_in_error)
 		return -1;
 
 	init_completion(&ch->tsk_mgmt_done);
@@ -2797,7 +2792,8 @@ static int srp_add_target(struct srp_host *host, struct srp_target_port *target)
 	scsi_scan_target(&target->scsi_host->shost_gendev,
 			 0, target->scsi_id, SCAN_WILD_CARD, 0);
 
-	if (!target->connected || target->qp_in_error) {
+	if (srp_connected_ch(target) < target->ch_count ||
+	    target->qp_in_error) {
 		shost_printk(KERN_INFO, target->scsi_host,
 			     PFX "SCSI scan failed - removing SCSI host\n");
 		srp_queue_remove_work(target);
@@ -3172,11 +3168,11 @@ static ssize_t srp_create_target(struct device *dev,
 
 	ret = srp_parse_options(buf, target);
 	if (ret)
-		goto err;
+		goto out;
 
 	ret = scsi_init_shared_tag_map(target_host, target_host->can_queue);
 	if (ret)
-		goto err;
+		goto out;
 
 	target->req_ring_size = target->queue_size - SRP_TSK_MGMT_SQ_SIZE;
 
@@ -3187,7 +3183,7 @@ static ssize_t srp_create_target(struct device *dev,
 			     be64_to_cpu(target->ioc_guid),
 			     be64_to_cpu(target->initiator_ext));
 		ret = -EEXIST;
-		goto err;
+		goto out;
 	}
 
 	if (!srp_dev->has_fmr && !srp_dev->has_fr && !target->allow_ext_sg &&
@@ -3208,7 +3204,7 @@ static ssize_t srp_create_target(struct device *dev,
 	spin_lock_init(&target->lock);
 	ret = ib_query_gid(ibdev, host->port, 0, &target->sgid);
 	if (ret)
-		goto err;
+		goto out;
 
 	ret = -ENOMEM;
 	target->ch_count = max_t(unsigned, num_online_nodes(),
@@ -3219,7 +3215,7 @@ static ssize_t srp_create_target(struct device *dev,
 	target->ch = kcalloc(target->ch_count, sizeof(*target->ch),
 			     GFP_KERNEL);
 	if (!target->ch)
-		goto err;
+		goto out;
 
 	node_idx = 0;
 	for_each_online_node(node) {
@@ -3315,9 +3311,6 @@ err_disconnect:
 	}
 
 	kfree(target->ch);
-
-err:
-	scsi_host_put(target_host);
 	goto out;
 }
 

drivers/infiniband/ulp/srp/ib_srp.h

@@ -170,6 +170,7 @@ struct srp_rdma_ch {
 
 	struct completion	tsk_mgmt_done;
 	u8			tsk_mgmt_status;
+	bool			connected;
 };
 
 /**
@@ -214,7 +215,6 @@ struct srp_target_port {
 	__be16			pkey;
 
 	u32			rq_tmo_jiffies;
-	bool			connected;
 
 	int			zero_req_lim;
 

drivers/input/touchscreen/pixcir_i2c_ts.c

@@ -78,7 +78,7 @@ static void pixcir_ts_parse(struct pixcir_i2c_ts_data *tsdata,
 	}
 
 	ret = i2c_master_recv(tsdata->client, rdbuf, readsize);
-	if (ret != sizeof(rdbuf)) {
+	if (ret != readsize) {
 		dev_err(&tsdata->client->dev,
 			"%s: i2c_master_recv failed(), ret=%d\n",
 			__func__, ret);

drivers/iommu/amd_iommu.c

@@ -1869,9 +1869,15 @@ static void free_pt_##LVL (unsigned long __pt)			\
 	pt = (u64 *)__pt;					\
 								\
 	for (i = 0; i < 512; ++i) {				\
+		/* PTE present? */				\
 		if (!IOMMU_PTE_PRESENT(pt[i]))			\
 			continue;				\
 								\
+		/* Large PTE? */				\
+		if (PM_PTE_LEVEL(pt[i]) == 0 ||			\
+		    PM_PTE_LEVEL(pt[i]) == 7)			\
+			continue;				\
+								\
 		p = (unsigned long)IOMMU_PTE_PAGE(pt[i]);	\
 		FN(p);						\
 	}							\

drivers/iommu/arm-smmu.c

@@ -1567,7 +1567,7 @@ static int arm_smmu_device_cfg_probe(struct arm_smmu_device *smmu)
 		return -ENODEV;
 	}
 
-	if ((id & ID0_S1TS) && ((smmu->version == 1) || (id & ID0_ATOSNS))) {
+	if ((id & ID0_S1TS) && ((smmu->version == 1) || !(id & ID0_ATOSNS))) {
 		smmu->features |= ARM_SMMU_FEAT_TRANS_OPS;
 		dev_notice(smmu->dev, "\taddress translation ops\n");
 	}

drivers/leds/led-class.c

@@ -187,6 +187,7 @@ void led_classdev_resume(struct led_classdev *led_cdev)
 }
 EXPORT_SYMBOL_GPL(led_classdev_resume);
 
+#ifdef CONFIG_PM_SLEEP
 static int led_suspend(struct device *dev)
 {
 	struct led_classdev *led_cdev = dev_get_drvdata(dev);
@@ -206,11 +207,9 @@ static int led_resume(struct device *dev)
 
 	return 0;
 }
+#endif
 
-static const struct dev_pm_ops leds_class_dev_pm_ops = {
-	.suspend        = led_suspend,
-	.resume         = led_resume,
-};
+static SIMPLE_DEV_PM_OPS(leds_class_dev_pm_ops, led_suspend, led_resume);
 
 static int match_name(struct device *dev, const void *data)
 {

drivers/misc/mei/client.c

@@ -699,7 +699,7 @@ void mei_host_client_init(struct work_struct *work)
 bool mei_hbuf_acquire(struct mei_device *dev)
 {
 	if (mei_pg_state(dev) == MEI_PG_ON ||
-	    dev->pg_event == MEI_PG_EVENT_WAIT) {
+	    mei_pg_in_transition(dev)) {
 		dev_dbg(dev->dev, "device is in pg\n");
 		return false;
 	}

drivers/misc/mei/hw-me.c

@@ -663,17 +663,46 @@ int mei_me_pg_exit_sync(struct mei_device *dev)
 	mutex_lock(&dev->device_lock);
 
 reply:
-	if (dev->pg_event == MEI_PG_EVENT_RECEIVED)
-		ret = mei_hbm_pg(dev, MEI_PG_ISOLATION_EXIT_RES_CMD);
+	if (dev->pg_event != MEI_PG_EVENT_RECEIVED) {
+		ret = -ETIME;
+		goto out;
+	}
+
+	dev->pg_event = MEI_PG_EVENT_INTR_WAIT;
+	ret = mei_hbm_pg(dev, MEI_PG_ISOLATION_EXIT_RES_CMD);
+	if (ret)
+		return ret;
+
+	mutex_unlock(&dev->device_lock);
+	wait_event_timeout(dev->wait_pg,
+		dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED, timeout);
+	mutex_lock(&dev->device_lock);
+
+	if (dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED)
+		ret = 0;
 	else
 		ret = -ETIME;
 
+out:
 	dev->pg_event = MEI_PG_EVENT_IDLE;
 	hw->pg_state = MEI_PG_OFF;
 
 	return ret;
 }
 
+/**
+ * mei_me_pg_in_transition - is device now in pg transition
+ *
+ * @dev: the device structure
+ *
+ * Return: true if in pg transition, false otherwise
+ */
+static bool mei_me_pg_in_transition(struct mei_device *dev)
+{
+	return dev->pg_event >= MEI_PG_EVENT_WAIT &&
+	       dev->pg_event <= MEI_PG_EVENT_INTR_WAIT;
+}
+
 /**
  * mei_me_pg_is_enabled - detect if PG is supported by HW
  *
@@ -704,6 +733,24 @@ notsupported:
 	return false;
 }
 
+/**
+ * mei_me_pg_intr - perform pg processing in interrupt thread handler
+ *
+ * @dev: the device structure
+ */
+static void mei_me_pg_intr(struct mei_device *dev)
+{
+	struct mei_me_hw *hw = to_me_hw(dev);
+
+	if (dev->pg_event != MEI_PG_EVENT_INTR_WAIT)
+		return;
+
+	dev->pg_event = MEI_PG_EVENT_INTR_RECEIVED;
+	hw->pg_state = MEI_PG_OFF;
+	if (waitqueue_active(&dev->wait_pg))
+		wake_up(&dev->wait_pg);
+}
+
 /**
  * mei_me_irq_quick_handler - The ISR of the MEI device
  *
@@ -761,6 +808,8 @@ irqreturn_t mei_me_irq_thread_handler(int irq, void *dev_id)
 		goto end;
 	}
 
+	mei_me_pg_intr(dev);
+
 	/*  check if we need to start the dev */
 	if (!mei_host_is_ready(dev)) {
 		if (mei_hw_is_ready(dev)) {
@@ -797,9 +846,10 @@ irqreturn_t mei_me_irq_thread_handler(int irq, void *dev_id)
 	/*
 	 * During PG handshake only allowed write is the replay to the
 	 * PG exit message, so block calling write function
-	 * if the pg state is not idle
+	 * if the pg event is in PG handshake
 	 */
-	if (dev->pg_event == MEI_PG_EVENT_IDLE) {
+	if (dev->pg_event != MEI_PG_EVENT_WAIT &&
+	    dev->pg_event != MEI_PG_EVENT_RECEIVED) {
 		rets = mei_irq_write_handler(dev, &complete_list);
 		dev->hbuf_is_ready = mei_hbuf_is_ready(dev);
 	}
@@ -824,6 +874,7 @@ static const struct mei_hw_ops mei_me_hw_ops = {
 	.hw_config = mei_me_hw_config,
 	.hw_start = mei_me_hw_start,
 
+	.pg_in_transition = mei_me_pg_in_transition,
 	.pg_is_enabled = mei_me_pg_is_enabled,
 
 	.intr_clear = mei_me_intr_clear,

drivers/misc/mei/hw-txe.c

@@ -16,6 +16,7 @@
 
 #include <linux/pci.h>
 #include <linux/jiffies.h>
+#include <linux/ktime.h>
 #include <linux/delay.h>
 #include <linux/kthread.h>
 #include <linux/irqreturn.h>
@@ -218,26 +219,25 @@ static u32 mei_txe_aliveness_get(struct mei_device *dev)
  *
  * Polls for HICR_HOST_ALIVENESS_RESP.ALIVENESS_RESP to be set
  *
- * Return: > 0 if the expected value was received, -ETIME otherwise
+ * Return: 0 if the expected value was received, -ETIME otherwise
  */
 static int mei_txe_aliveness_poll(struct mei_device *dev, u32 expected)
 {
 	struct mei_txe_hw *hw = to_txe_hw(dev);
-	int t = 0;
+	ktime_t stop, start;
 
+	start = ktime_get();
+	stop = ktime_add(start, ms_to_ktime(SEC_ALIVENESS_WAIT_TIMEOUT));
 	do {
 		hw->aliveness = mei_txe_aliveness_get(dev);
 		if (hw->aliveness == expected) {
 			dev->pg_event = MEI_PG_EVENT_IDLE;
-			dev_dbg(dev->dev,
-				"aliveness settled after %d msecs\n", t);
-			return t;
+			dev_dbg(dev->dev, "aliveness settled after %lld usecs\n",
+				ktime_to_us(ktime_sub(ktime_get(), start)));
+			return 0;
 		}
-		mutex_unlock(&dev->device_lock);
-		msleep(MSEC_PER_SEC / 5);
-		mutex_lock(&dev->device_lock);
-		t += MSEC_PER_SEC / 5;
-	} while (t < SEC_ALIVENESS_WAIT_TIMEOUT);
+		usleep_range(20, 50);
+	} while (ktime_before(ktime_get(), stop));
 
 	dev->pg_event = MEI_PG_EVENT_IDLE;
 	dev_err(dev->dev, "aliveness timed out\n");
@@ -301,6 +301,18 @@ int mei_txe_aliveness_set_sync(struct mei_device *dev, u32 req)
 	return 0;
 }
 
+/**
+ * mei_txe_pg_in_transition - is device now in pg transition
+ *
+ * @dev: the device structure
+ *
+ * Return: true if in pg transition, false otherwise
+ */
+static bool mei_txe_pg_in_transition(struct mei_device *dev)
+{
+	return dev->pg_event == MEI_PG_EVENT_WAIT;
+}
+
 /**
  * mei_txe_pg_is_enabled - detect if PG is supported by HW
  *
@@ -1138,6 +1150,7 @@ static const struct mei_hw_ops mei_txe_hw_ops = {
 	.hw_config = mei_txe_hw_config,
 	.hw_start = mei_txe_hw_start,
 
+	.pg_in_transition = mei_txe_pg_in_transition,
 	.pg_is_enabled = mei_txe_pg_is_enabled,
 
 	.intr_clear = mei_txe_intr_clear,

drivers/misc/mei/mei_dev.h

@@ -271,6 +271,7 @@ struct mei_cl {
 
  * @fw_status        : get fw status registers
  * @pg_state         : power gating state of the device
+ * @pg_in_transition : is device now in pg transition
  * @pg_is_enabled    : is power gating enabled
 
  * @intr_clear       : clear pending interrupts
@@ -300,6 +301,7 @@ struct mei_hw_ops {
 
 	int (*fw_status)(struct mei_device *dev, struct mei_fw_status *fw_sts);
 	enum mei_pg_state (*pg_state)(struct mei_device *dev);
+	bool (*pg_in_transition)(struct mei_device *dev);
 	bool (*pg_is_enabled)(struct mei_device *dev);
 
 	void (*intr_clear)(struct mei_device *dev);
@@ -398,11 +400,15 @@ struct mei_cl_device {
  * @MEI_PG_EVENT_IDLE: the driver is not in power gating transition
  * @MEI_PG_EVENT_WAIT: the driver is waiting for a pg event to complete
  * @MEI_PG_EVENT_RECEIVED: the driver received pg event
+ * @MEI_PG_EVENT_INTR_WAIT: the driver is waiting for a pg event interrupt
+ * @MEI_PG_EVENT_INTR_RECEIVED: the driver received pg event interrupt
  */
 enum mei_pg_event {
 	MEI_PG_EVENT_IDLE,
 	MEI_PG_EVENT_WAIT,
 	MEI_PG_EVENT_RECEIVED,
+	MEI_PG_EVENT_INTR_WAIT,
+	MEI_PG_EVENT_INTR_RECEIVED,
 };
 
 /**
@@ -717,6 +723,11 @@ static inline enum mei_pg_state mei_pg_state(struct mei_device *dev)
 	return dev->ops->pg_state(dev);
 }
 
+static inline bool mei_pg_in_transition(struct mei_device *dev)
+{
+	return dev->ops->pg_in_transition(dev);
+}
+
 static inline bool mei_pg_is_enabled(struct mei_device *dev)
 {
 	return dev->ops->pg_is_enabled(dev);

drivers/mmc/host/sdhci.c

@@ -848,7 +848,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
 			int sg_cnt;
 
 			sg_cnt = sdhci_pre_dma_transfer(host, data, NULL);
-			if (sg_cnt == 0) {
+			if (sg_cnt <= 0) {
 				/*
 				 * This only happens when someone fed
 				 * us an invalid request.

drivers/mtd/maps/dc21285.c

@@ -38,9 +38,9 @@ static void nw_en_write(void)
 	 * we want to write a bit pattern XXX1 to Xilinx to enable
 	 * the write gate, which will be open for about the next 2ms.
 	 */
-	spin_lock_irqsave(&nw_gpio_lock, flags);
+	raw_spin_lock_irqsave(&nw_gpio_lock, flags);
 	nw_cpld_modify(CPLD_FLASH_WR_ENABLE, CPLD_FLASH_WR_ENABLE);
-	spin_unlock_irqrestore(&nw_gpio_lock, flags);
+	raw_spin_unlock_irqrestore(&nw_gpio_lock, flags);
 
 	/*
 	 * let the ISA bus to catch on...

drivers/mtd/mtd_blkdevs.c

@@ -197,6 +197,7 @@ static int blktrans_open(struct block_device *bdev, fmode_t mode)
 		return -ERESTARTSYS; /* FIXME: busy loop! -arnd*/
 
 	mutex_lock(&dev->lock);
+	mutex_lock(&mtd_table_mutex);
 
 	if (dev->open)
 		goto unlock;
@@ -220,6 +221,7 @@ static int blktrans_open(struct block_device *bdev, fmode_t mode)
 
 unlock:
 	dev->open++;
+	mutex_unlock(&mtd_table_mutex);
 	mutex_unlock(&dev->lock);
 	blktrans_dev_put(dev);
 	return ret;
@@ -230,6 +232,7 @@ error_release:
 error_put:
 	module_put(dev->tr->owner);
 	kref_put(&dev->ref, blktrans_dev_release);
+	mutex_unlock(&mtd_table_mutex);
 	mutex_unlock(&dev->lock);
 	blktrans_dev_put(dev);
 	return ret;
@@ -243,6 +246,7 @@ static void blktrans_release(struct gendisk *disk, fmode_t mode)
 		return;
 
 	mutex_lock(&dev->lock);
+	mutex_lock(&mtd_table_mutex);
 
 	if (--dev->open)
 		goto unlock;
@@ -256,6 +260,7 @@ static void blktrans_release(struct gendisk *disk, fmode_t mode)
 		__put_mtd_device(dev->mtd);
 	}
 unlock:
+	mutex_unlock(&mtd_table_mutex);
 	mutex_unlock(&dev->lock);
 	blktrans_dev_put(dev);
 }

drivers/net/can/dev.c

@@ -440,6 +440,9 @@ unsigned int can_get_echo_skb(struct net_device *dev, unsigned int idx)
 		struct can_frame *cf = (struct can_frame *)skb->data;
 		u8 dlc = cf->can_dlc;
 
+		if (!(skb->tstamp.tv64))
+			__net_timestamp(skb);
+
 		netif_rx(priv->echo_skb[idx]);
 		priv->echo_skb[idx] = NULL;
 
@@ -575,6 +578,7 @@ struct sk_buff *alloc_can_skb(struct net_device *dev, struct can_frame **cf)
 	if (unlikely(!skb))
 		return NULL;
 
+	__net_timestamp(skb);
 	skb->protocol = htons(ETH_P_CAN);
 	skb->pkt_type = PACKET_BROADCAST;
 	skb->ip_summed = CHECKSUM_UNNECESSARY;
@@ -603,6 +607,7 @@ struct sk_buff *alloc_canfd_skb(struct net_device *dev,
 	if (unlikely(!skb))
 		return NULL;
 
+	__net_timestamp(skb);
 	skb->protocol = htons(ETH_P_CANFD);
 	skb->pkt_type = PACKET_BROADCAST;
 	skb->ip_summed = CHECKSUM_UNNECESSARY;

drivers/net/can/slcan.c

@@ -207,6 +207,7 @@ static void slc_bump(struct slcan *sl)
 	if (!skb)
 		return;
 
+	__net_timestamp(skb);
 	skb->dev = sl->dev;
 	skb->protocol = htons(ETH_P_CAN);
 	skb->pkt_type = PACKET_BROADCAST;

drivers/net/can/vcan.c

@@ -78,6 +78,9 @@ static void vcan_rx(struct sk_buff *skb, struct net_device *dev)
 	skb->dev       = dev;
 	skb->ip_summed = CHECKSUM_UNNECESSARY;
 
+	if (!(skb->tstamp.tv64))
+		__net_timestamp(skb);
+
 	netif_rx_ni(skb);
 }
 

drivers/net/ethernet/amd/xgbe/xgbe-desc.c

@@ -263,7 +263,7 @@ static int xgbe_alloc_pages(struct xgbe_prv_data *pdata,
 	int ret;
 
 	/* Try to obtain pages, decreasing order if necessary */
-	gfp |= __GFP_COLD | __GFP_COMP;
+	gfp |= __GFP_COLD | __GFP_COMP | __GFP_NOWARN;
 	while (order >= 0) {
 		pages = alloc_pages(gfp, order);
 		if (pages)

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

@@ -9323,7 +9323,8 @@ unload_error:
 	 * function stop ramrod is sent, since as part of this ramrod FW access
 	 * PTP registers.
 	 */
-	bnx2x_stop_ptp(bp);
+	if (bp->flags & PTP_SUPPORTED)
+		bnx2x_stop_ptp(bp);
 
 	/* Disable HW interrupts, NAPI */
 	bnx2x_netif_stop(bp, 1);

drivers/net/ethernet/marvell/mvneta.c

@@ -310,6 +310,7 @@ struct mvneta_port {
 	unsigned int link;
 	unsigned int duplex;
 	unsigned int speed;
+	unsigned int tx_csum_limit;
 	int use_inband_status:1;
 };
 
@@ -1013,6 +1014,12 @@ static void mvneta_defaults_set(struct mvneta_port *pp)
 		val = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
 		val |= MVNETA_GMAC_1MS_CLOCK_ENABLE;
 		mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, val);
+	} else {
+		val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
+		val &= ~(MVNETA_GMAC_INBAND_AN_ENABLE |
+		       MVNETA_GMAC_AN_SPEED_EN |
+		       MVNETA_GMAC_AN_DUPLEX_EN);
+		mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
 	}
 
 	mvneta_set_ucast_table(pp, -1);
@@ -2502,8 +2509,10 @@ static int mvneta_change_mtu(struct net_device *dev, int mtu)
 
 	dev->mtu = mtu;
 
-	if (!netif_running(dev))
+	if (!netif_running(dev)) {
+		netdev_update_features(dev);
 		return 0;
+	}
 
 	/* The interface is running, so we have to force a
 	 * reallocation of the queues
@@ -2532,9 +2541,26 @@ static int mvneta_change_mtu(struct net_device *dev, int mtu)
 	mvneta_start_dev(pp);
 	mvneta_port_up(pp);
 
+	netdev_update_features(dev);
+
 	return 0;
 }
 
+static netdev_features_t mvneta_fix_features(struct net_device *dev,
+					     netdev_features_t features)
+{
+	struct mvneta_port *pp = netdev_priv(dev);
+
+	if (pp->tx_csum_limit && dev->mtu > pp->tx_csum_limit) {
+		features &= ~(NETIF_F_IP_CSUM | NETIF_F_TSO);
+		netdev_info(dev,
+			    "Disable IP checksum for MTU greater than %dB\n",
+			    pp->tx_csum_limit);
+	}
+
+	return features;
+}
+
 /* Get mac address */
 static void mvneta_get_mac_addr(struct mvneta_port *pp, unsigned char *addr)
 {
@@ -2856,6 +2882,7 @@ static const struct net_device_ops mvneta_netdev_ops = {
 	.ndo_set_rx_mode     = mvneta_set_rx_mode,
 	.ndo_set_mac_address = mvneta_set_mac_addr,
 	.ndo_change_mtu      = mvneta_change_mtu,
+	.ndo_fix_features    = mvneta_fix_features,
 	.ndo_get_stats64     = mvneta_get_stats64,
 	.ndo_do_ioctl        = mvneta_ioctl,
 };
@@ -3101,6 +3128,9 @@ static int mvneta_probe(struct platform_device *pdev)
 		}
 	}
 
+	if (of_device_is_compatible(dn, "marvell,armada-370-neta"))
+		pp->tx_csum_limit = 1600;
+
 	pp->tx_ring_size = MVNETA_MAX_TXD;
 	pp->rx_ring_size = MVNETA_MAX_RXD;
 
@@ -3179,6 +3209,7 @@ static int mvneta_remove(struct platform_device *pdev)
 
 static const struct of_device_id mvneta_match[] = {
 	{ .compatible = "marvell,armada-370-neta" },
+	{ .compatible = "marvell,armada-xp-neta" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, mvneta_match);

drivers/net/ethernet/mellanox/mlx4/en_netdev.c

@@ -1973,10 +1973,6 @@ void mlx4_en_free_resources(struct mlx4_en_priv *priv)
 			mlx4_en_destroy_cq(priv, &priv->rx_cq[i]);
 	}
 
-	if (priv->base_tx_qpn) {
-		mlx4_qp_release_range(priv->mdev->dev, priv->base_tx_qpn, priv->tx_ring_num);
-		priv->base_tx_qpn = 0;
-	}
 }
 
 int mlx4_en_alloc_resources(struct mlx4_en_priv *priv)

drivers/net/ethernet/mellanox/mlx4/en_rx.c

@@ -723,7 +723,7 @@ static int get_fixed_ipv6_csum(__wsum hw_checksum, struct sk_buff *skb,
 }
 #endif
 static int check_csum(struct mlx4_cqe *cqe, struct sk_buff *skb, void *va,
-		      int hwtstamp_rx_filter)
+		      netdev_features_t dev_features)
 {
 	__wsum hw_checksum = 0;
 
@@ -731,14 +731,8 @@ static int check_csum(struct mlx4_cqe *cqe, struct sk_buff *skb, void *va,
 
 	hw_checksum = csum_unfold((__force __sum16)cqe->checksum);
 
-	if (((struct ethhdr *)va)->h_proto == htons(ETH_P_8021Q) &&
-	    hwtstamp_rx_filter != HWTSTAMP_FILTER_NONE) {
-		/* next protocol non IPv4 or IPv6 */
-		if (((struct vlan_hdr *)hdr)->h_vlan_encapsulated_proto
-		    != htons(ETH_P_IP) &&
-		    ((struct vlan_hdr *)hdr)->h_vlan_encapsulated_proto
-		    != htons(ETH_P_IPV6))
-			return -1;
+	if (cqe->vlan_my_qpn & cpu_to_be32(MLX4_CQE_VLAN_PRESENT_MASK) &&
+	    !(dev_features & NETIF_F_HW_VLAN_CTAG_RX)) {
 		hw_checksum = get_fixed_vlan_csum(hw_checksum, hdr);
 		hdr += sizeof(struct vlan_hdr);
 	}
@@ -901,7 +895,8 @@ int mlx4_en_process_rx_cq(struct net_device *dev, struct mlx4_en_cq *cq, int bud
 
 			if (ip_summed == CHECKSUM_COMPLETE) {
 				void *va = skb_frag_address(skb_shinfo(gro_skb)->frags);
-				if (check_csum(cqe, gro_skb, va, ring->hwtstamp_rx_filter)) {
+				if (check_csum(cqe, gro_skb, va,
+					       dev->features)) {
 					ip_summed = CHECKSUM_NONE;
 					ring->csum_none++;
 					ring->csum_complete--;
@@ -956,7 +951,7 @@ int mlx4_en_process_rx_cq(struct net_device *dev, struct mlx4_en_cq *cq, int bud
 		}
 
 		if (ip_summed == CHECKSUM_COMPLETE) {
-			if (check_csum(cqe, skb, skb->data, ring->hwtstamp_rx_filter)) {
+			if (check_csum(cqe, skb, skb->data, dev->features)) {
 				ip_summed = CHECKSUM_NONE;
 				ring->csum_complete--;
 				ring->csum_none++;

drivers/net/ethernet/mellanox/mlx4/en_tx.c

@@ -66,6 +66,7 @@ int mlx4_en_create_tx_ring(struct mlx4_en_priv *priv,
 	ring->size = size;
 	ring->size_mask = size - 1;
 	ring->stride = stride;
+	ring->full_size = ring->size - HEADROOM - MAX_DESC_TXBBS;
 
 	tmp = size * sizeof(struct mlx4_en_tx_info);
 	ring->tx_info = kmalloc_node(tmp, GFP_KERNEL | __GFP_NOWARN, node);
@@ -180,6 +181,7 @@ void mlx4_en_destroy_tx_ring(struct mlx4_en_priv *priv,
 		mlx4_bf_free(mdev->dev, &ring->bf);
 	mlx4_qp_remove(mdev->dev, &ring->qp);
 	mlx4_qp_free(mdev->dev, &ring->qp);
+	mlx4_qp_release_range(priv->mdev->dev, ring->qpn, 1);
 	mlx4_en_unmap_buffer(&ring->wqres.buf);
 	mlx4_free_hwq_res(mdev->dev, &ring->wqres, ring->buf_size);
 	kfree(ring->bounce_buf);
@@ -231,6 +233,11 @@ void mlx4_en_deactivate_tx_ring(struct mlx4_en_priv *priv,
 		       MLX4_QP_STATE_RST, NULL, 0, 0, &ring->qp);
 }
 
+static inline bool mlx4_en_is_tx_ring_full(struct mlx4_en_tx_ring *ring)
+{
+	return ring->prod - ring->cons > ring->full_size;
+}
+
 static void mlx4_en_stamp_wqe(struct mlx4_en_priv *priv,
 			      struct mlx4_en_tx_ring *ring, int index,
 			      u8 owner)
@@ -473,11 +480,10 @@ static bool mlx4_en_process_tx_cq(struct net_device *dev,
 
 	netdev_tx_completed_queue(ring->tx_queue, packets, bytes);
 
-	/*
-	 * Wakeup Tx queue if this stopped, and at least 1 packet
-	 * was completed
+	/* Wakeup Tx queue if this stopped, and ring is not full.
 	 */
-	if (netif_tx_queue_stopped(ring->tx_queue) && txbbs_skipped > 0) {
+	if (netif_tx_queue_stopped(ring->tx_queue) &&
+	    !mlx4_en_is_tx_ring_full(ring)) {
 		netif_tx_wake_queue(ring->tx_queue);
 		ring->wake_queue++;
 	}
@@ -921,8 +927,7 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev)
 	skb_tx_timestamp(skb);
 
 	/* Check available TXBBs And 2K spare for prefetch */
-	stop_queue = (int)(ring->prod - ring_cons) >
-		      ring->size - HEADROOM - MAX_DESC_TXBBS;
+	stop_queue = mlx4_en_is_tx_ring_full(ring);
 	if (unlikely(stop_queue)) {
 		netif_tx_stop_queue(ring->tx_queue);
 		ring->queue_stopped++;
@@ -991,8 +996,7 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev)
 		smp_rmb();
 
 		ring_cons = ACCESS_ONCE(ring->cons);
-		if (unlikely(((int)(ring->prod - ring_cons)) <=
-			     ring->size - HEADROOM - MAX_DESC_TXBBS)) {
+		if (unlikely(!mlx4_en_is_tx_ring_full(ring))) {
 			netif_tx_wake_queue(ring->tx_queue);
 			ring->wake_queue++;
 		}

drivers/net/ethernet/mellanox/mlx4/intf.c

@@ -93,8 +93,14 @@ int mlx4_register_interface(struct mlx4_interface *intf)
 	mutex_lock(&intf_mutex);
 
 	list_add_tail(&intf->list, &intf_list);
-	list_for_each_entry(priv, &dev_list, dev_list)
+	list_for_each_entry(priv, &dev_list, dev_list) {
+		if (mlx4_is_mfunc(&priv->dev) && (intf->flags & MLX4_INTFF_BONDING)) {
+			mlx4_dbg(&priv->dev,
+				 "SRIOV, disabling HA mode for intf proto %d\n", intf->protocol);
+			intf->flags &= ~MLX4_INTFF_BONDING;
+		}
 		mlx4_add_device(intf, priv);
+	}
 
 	mutex_unlock(&intf_mutex);
 

drivers/net/ethernet/mellanox/mlx4/mlx4_en.h

@@ -279,6 +279,7 @@ struct mlx4_en_tx_ring {
 	u32			size; /* number of TXBBs */
 	u32			size_mask;
 	u16			stride;
+	u32			full_size;
 	u16			cqn;	/* index of port CQ associated with this ring */
 	u32			buf_size;
 	__be32			doorbell_qpn;
@@ -579,7 +580,6 @@ struct mlx4_en_priv {
 	int vids[128];
 	bool wol;
 	struct device *ddev;
-	int base_tx_qpn;
 	struct hlist_head mac_hash[MLX4_EN_MAC_HASH_SIZE];
 	struct hwtstamp_config hwtstamp_config;
 

drivers/net/phy/phy_device.c

@@ -796,10 +796,11 @@ static int genphy_config_advert(struct phy_device *phydev)
 	if (phydev->supported & (SUPPORTED_1000baseT_Half |
 				 SUPPORTED_1000baseT_Full)) {
 		adv |= ethtool_adv_to_mii_ctrl1000_t(advertise);
-		if (adv != oldadv)
-			changed = 1;
 	}
 
+	if (adv != oldadv)
+		changed = 1;
+
 	err = phy_write(phydev, MII_CTRL1000, adv);
 	if (err < 0)
 		return err;

drivers/net/wireless/b43/main.c

@@ -5365,6 +5365,10 @@ static void b43_supported_bands(struct b43_wldev *dev, bool *have_2ghz_phy,
 		*have_5ghz_phy = true;
 		return;
 	case 0x4321: /* BCM4306 */
+		/* There are 14e4:4321 PCI devs with 2.4 GHz BCM4321 (N-PHY) */
+		if (dev->phy.type != B43_PHYTYPE_G)
+			break;
+		/* fall through */
 	case 0x4313: /* BCM4311 */
 	case 0x431a: /* BCM4318 */
 	case 0x432a: /* BCM4321 */

drivers/net/xen-netback/xenbus.c

@@ -681,6 +681,9 @@ static int xen_register_watchers(struct xenbus_device *dev, struct xenvif *vif)
 	char *node;
 	unsigned maxlen = strlen(dev->nodename) + sizeof("/rate");
 
+	if (vif->credit_watch.node)
+		return -EADDRINUSE;
+
 	node = kmalloc(maxlen, GFP_KERNEL);
 	if (!node)
 		return -ENOMEM;
@@ -770,6 +773,7 @@ static void connect(struct backend_info *be)
 	}
 
 	xen_net_read_rate(dev, &credit_bytes, &credit_usec);
+	xen_unregister_watchers(be->vif);
 	xen_register_watchers(dev, be->vif);
 	read_xenbus_vif_flags(be);
 

drivers/of/address.c

@@ -765,7 +765,7 @@ unsigned long __weak pci_address_to_pio(phys_addr_t address)
 	spin_lock(&io_range_lock);
 	list_for_each_entry(res, &io_range_list, list) {
 		if (address >= res->start && address < res->start + res->size) {
-			addr = res->start - address + offset;
+			addr = address - res->start + offset;
 			break;
 		}
 		offset += res->size;

drivers/pci/Kconfig

@@ -1,6 +1,10 @@
 #
 # PCI configuration
 #
+config PCI_BUS_ADDR_T_64BIT
+	def_bool y if (ARCH_DMA_ADDR_T_64BIT || 64BIT)
+	depends on PCI
+
 config PCI_MSI
 	bool "Message Signaled Interrupts (MSI and MSI-X)"
 	depends on PCI

drivers/pci/bus.c

@@ -92,11 +92,11 @@ void pci_bus_remove_resources(struct pci_bus *bus)
 }
 
 static struct pci_bus_region pci_32_bit = {0, 0xffffffffULL};
-#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
+#ifdef CONFIG_PCI_BUS_ADDR_T_64BIT
 static struct pci_bus_region pci_64_bit = {0,
-				(dma_addr_t) 0xffffffffffffffffULL};
-static struct pci_bus_region pci_high = {(dma_addr_t) 0x100000000ULL,
-				(dma_addr_t) 0xffffffffffffffffULL};
+				(pci_bus_addr_t) 0xffffffffffffffffULL};
+static struct pci_bus_region pci_high = {(pci_bus_addr_t) 0x100000000ULL,
+				(pci_bus_addr_t) 0xffffffffffffffffULL};
 #endif
 
 /*
@@ -200,7 +200,7 @@ int pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res,
 					  resource_size_t),
 		void *alignf_data)
 {
-#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
+#ifdef CONFIG_PCI_BUS_ADDR_T_64BIT
 	int rc;
 
 	if (res->flags & IORESOURCE_MEM_64) {

drivers/pci/hotplug/pciehp_hpc.c

@@ -176,20 +176,17 @@ static void pcie_wait_cmd(struct controller *ctrl)
 			  jiffies_to_msecs(jiffies - ctrl->cmd_started));
 }
 
-/**
- * pcie_write_cmd - Issue controller command
- * @ctrl: controller to which the command is issued
- * @cmd:  command value written to slot control register
- * @mask: bitmask of slot control register to be modified
- */
-static void pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask)
+static void pcie_do_write_cmd(struct controller *ctrl, u16 cmd,
+			      u16 mask, bool wait)
 {
 	struct pci_dev *pdev = ctrl_dev(ctrl);
 	u16 slot_ctrl;
 
 	mutex_lock(&ctrl->ctrl_lock);
 
-	/* Wait for any previous command that might still be in progress */
+	/*
+	 * Always wait for any previous command that might still be in progress
+	 */
 	pcie_wait_cmd(ctrl);
 
 	pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &slot_ctrl);
@@ -201,9 +198,33 @@ static void pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask)
 	ctrl->cmd_started = jiffies;
 	ctrl->slot_ctrl = slot_ctrl;
 
+	/*
+	 * Optionally wait for the hardware to be ready for a new command,
+	 * indicating completion of the above issued command.
+	 */
+	if (wait)
+		pcie_wait_cmd(ctrl);
+
 	mutex_unlock(&ctrl->ctrl_lock);
 }
 
+/**
+ * pcie_write_cmd - Issue controller command
+ * @ctrl: controller to which the command is issued
+ * @cmd:  command value written to slot control register
+ * @mask: bitmask of slot control register to be modified
+ */
+static void pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask)
+{
+	pcie_do_write_cmd(ctrl, cmd, mask, true);
+}
+
+/* Same as above without waiting for the hardware to latch */
+static void pcie_write_cmd_nowait(struct controller *ctrl, u16 cmd, u16 mask)
+{
+	pcie_do_write_cmd(ctrl, cmd, mask, false);
+}
+
 bool pciehp_check_link_active(struct controller *ctrl)
 {
 	struct pci_dev *pdev = ctrl_dev(ctrl);
@@ -422,7 +443,7 @@ void pciehp_set_attention_status(struct slot *slot, u8 value)
 	default:
 		return;
 	}
-	pcie_write_cmd(ctrl, slot_cmd, PCI_EXP_SLTCTL_AIC);
+	pcie_write_cmd_nowait(ctrl, slot_cmd, PCI_EXP_SLTCTL_AIC);
 	ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
 		 pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_cmd);
 }
@@ -434,7 +455,8 @@ void pciehp_green_led_on(struct slot *slot)
 	if (!PWR_LED(ctrl))
 		return;
 
-	pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_PWR_IND_ON, PCI_EXP_SLTCTL_PIC);
+	pcie_write_cmd_nowait(ctrl, PCI_EXP_SLTCTL_PWR_IND_ON,
+			      PCI_EXP_SLTCTL_PIC);
 	ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
 		 pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL,
 		 PCI_EXP_SLTCTL_PWR_IND_ON);
@@ -447,7 +469,8 @@ void pciehp_green_led_off(struct slot *slot)
 	if (!PWR_LED(ctrl))
 		return;
 
-	pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_PWR_IND_OFF, PCI_EXP_SLTCTL_PIC);
+	pcie_write_cmd_nowait(ctrl, PCI_EXP_SLTCTL_PWR_IND_OFF,
+			      PCI_EXP_SLTCTL_PIC);
 	ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
 		 pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL,
 		 PCI_EXP_SLTCTL_PWR_IND_OFF);
@@ -460,7 +483,8 @@ void pciehp_green_led_blink(struct slot *slot)
 	if (!PWR_LED(ctrl))
 		return;
 
-	pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_PWR_IND_BLINK, PCI_EXP_SLTCTL_PIC);
+	pcie_write_cmd_nowait(ctrl, PCI_EXP_SLTCTL_PWR_IND_BLINK,
+			      PCI_EXP_SLTCTL_PIC);
 	ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
 		 pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL,
 		 PCI_EXP_SLTCTL_PWR_IND_BLINK);
@@ -613,7 +637,7 @@ void pcie_enable_notification(struct controller *ctrl)
 		PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_CCIE |
 		PCI_EXP_SLTCTL_DLLSCE);
 
-	pcie_write_cmd(ctrl, cmd, mask);
+	pcie_write_cmd_nowait(ctrl, cmd, mask);
 	ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
 		 pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, cmd);
 }
@@ -664,7 +688,7 @@ int pciehp_reset_slot(struct slot *slot, int probe)
 	pci_reset_bridge_secondary_bus(ctrl->pcie->port);
 
 	pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, stat_mask);
-	pcie_write_cmd(ctrl, ctrl_mask, ctrl_mask);
+	pcie_write_cmd_nowait(ctrl, ctrl_mask, ctrl_mask);
 	ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
 		 pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, ctrl_mask);
 	if (pciehp_poll_mode)

drivers/pci/pci.c

@@ -4324,6 +4324,17 @@ bool pci_device_is_present(struct pci_dev *pdev)
 }
 EXPORT_SYMBOL_GPL(pci_device_is_present);
 
+void pci_ignore_hotplug(struct pci_dev *dev)
+{
+	struct pci_dev *bridge = dev->bus->self;
+
+	dev->ignore_hotplug = 1;
+	/* Propagate the "ignore hotplug" setting to the parent bridge. */
+	if (bridge)
+		bridge->ignore_hotplug = 1;
+}
+EXPORT_SYMBOL_GPL(pci_ignore_hotplug);
+
 #define RESOURCE_ALIGNMENT_PARAM_SIZE COMMAND_LINE_SIZE
 static char resource_alignment_param[RESOURCE_ALIGNMENT_PARAM_SIZE] = {0};
 static DEFINE_SPINLOCK(resource_alignment_lock);

drivers/pci/probe.c

@@ -254,8 +254,8 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 	}
 
 	if (res->flags & IORESOURCE_MEM_64) {
-		if ((sizeof(dma_addr_t) < 8 || sizeof(resource_size_t) < 8) &&
-		    sz64 > 0x100000000ULL) {
+		if ((sizeof(pci_bus_addr_t) < 8 || sizeof(resource_size_t) < 8)
+		    && sz64 > 0x100000000ULL) {
 			res->flags |= IORESOURCE_UNSET | IORESOURCE_DISABLED;
 			res->start = 0;
 			res->end = 0;
@@ -264,7 +264,7 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 			goto out;
 		}
 
-		if ((sizeof(dma_addr_t) < 8) && l) {
+		if ((sizeof(pci_bus_addr_t) < 8) && l) {
 			/* Above 32-bit boundary; try to reallocate */
 			res->flags |= IORESOURCE_UNSET;
 			res->start = 0;
@@ -399,7 +399,7 @@ static void pci_read_bridge_mmio_pref(struct pci_bus *child)
 	struct pci_dev *dev = child->self;
 	u16 mem_base_lo, mem_limit_lo;
 	u64 base64, limit64;
-	dma_addr_t base, limit;
+	pci_bus_addr_t base, limit;
 	struct pci_bus_region region;
 	struct resource *res;
 
@@ -426,8 +426,8 @@ static void pci_read_bridge_mmio_pref(struct pci_bus *child)
 		}
 	}
 
-	base = (dma_addr_t) base64;
-	limit = (dma_addr_t) limit64;
+	base = (pci_bus_addr_t) base64;
+	limit = (pci_bus_addr_t) limit64;
 
 	if (base != base64) {
 		dev_err(&dev->dev, "can't handle bridge window above 4GB (bus address %#010llx)\n",

drivers/pcmcia/topic.h

@@ -104,6 +104,9 @@
 #define TOPIC_EXCA_IF_CONTROL		0x3e	/* 8 bit */
 #define TOPIC_EXCA_IFC_33V_ENA		0x01
 
+#define TOPIC_PCI_CFG_PPBCN		0x3e	/* 16-bit */
+#define TOPIC_PCI_CFG_PPBCN_WBEN	0x0400
+
 static void topic97_zoom_video(struct pcmcia_socket *sock, int onoff)
 {
 	struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket);
@@ -138,6 +141,7 @@ static int topic97_override(struct yenta_socket *socket)
 static int topic95_override(struct yenta_socket *socket)
 {
 	u8 fctrl;
+	u16 ppbcn;
 
 	/* enable 3.3V support for 16bit cards */
 	fctrl = exca_readb(socket, TOPIC_EXCA_IF_CONTROL);
@@ -146,6 +150,18 @@ static int topic95_override(struct yenta_socket *socket)
 	/* tell yenta to use exca registers to power 16bit cards */
 	socket->flags |= YENTA_16BIT_POWER_EXCA | YENTA_16BIT_POWER_DF;
 
+	/* Disable write buffers to prevent lockups under load with numerous
+	   Cardbus cards, observed on Tecra 500CDT and reported elsewhere on the
+	   net.  This is not a power-on default according to the datasheet
+	   but some BIOSes seem to set it. */
+	if (pci_read_config_word(socket->dev, TOPIC_PCI_CFG_PPBCN, &ppbcn) == 0
+	    && socket->dev->revision <= 7
+	    && (ppbcn & TOPIC_PCI_CFG_PPBCN_WBEN)) {
+		ppbcn &= ~TOPIC_PCI_CFG_PPBCN_WBEN;
+		pci_write_config_word(socket->dev, TOPIC_PCI_CFG_PPBCN, ppbcn);
+		dev_info(&socket->dev->dev, "Disabled ToPIC95 Cardbus write buffers.\n");
+	}
+
 	return 0;
 }
 

drivers/pnp/system.c

@@ -7,6 +7,7 @@
  *	Bjorn Helgaas <bjorn.helgaas@hp.com>
  */
 
+#include <linux/acpi.h>
 #include <linux/pnp.h>
 #include <linux/device.h>
 #include <linux/init.h>
@@ -22,25 +23,41 @@ static const struct pnp_device_id pnp_dev_table[] = {
 	{"", 0}
 };
 
+#ifdef CONFIG_ACPI
+static bool __reserve_range(u64 start, unsigned int length, bool io, char *desc)
+{
+	u8 space_id = io ? ACPI_ADR_SPACE_SYSTEM_IO : ACPI_ADR_SPACE_SYSTEM_MEMORY;
+	return !acpi_reserve_region(start, length, space_id, IORESOURCE_BUSY, desc);
+}
+#else
+static bool __reserve_range(u64 start, unsigned int length, bool io, char *desc)
+{
+	struct resource *res;
+
+	res = io ? request_region(start, length, desc) :
+		request_mem_region(start, length, desc);
+	if (res) {
+		res->flags &= ~IORESOURCE_BUSY;
+		return true;
+	}
+	return false;
+}
+#endif
+
 static void reserve_range(struct pnp_dev *dev, struct resource *r, int port)
 {
 	char *regionid;
 	const char *pnpid = dev_name(&dev->dev);
 	resource_size_t start = r->start, end = r->end;
-	struct resource *res;
+	bool reserved;
 
 	regionid = kmalloc(16, GFP_KERNEL);
 	if (!regionid)
 		return;
 
 	snprintf(regionid, 16, "pnp %s", pnpid);
-	if (port)
-		res = request_region(start, end - start + 1, regionid);
-	else
-		res = request_mem_region(start, end - start + 1, regionid);
-	if (res)
-		res->flags &= ~IORESOURCE_BUSY;
-	else
+	reserved = __reserve_range(start, end - start + 1, !!port, regionid);
+	if (!reserved)
 		kfree(regionid);
 
 	/*
@@ -49,7 +66,7 @@ static void reserve_range(struct pnp_dev *dev, struct resource *r, int port)
 	 * have double reservations.
 	 */
 	dev_info(&dev->dev, "%pR %s reserved\n", r,
-		 res ? "has been" : "could not be");
+		 reserved ? "has been" : "could not be");
 }
 
 static void reserve_resources_of_dev(struct pnp_dev *dev)

drivers/power/power_supply_core.c

@@ -30,6 +30,8 @@ EXPORT_SYMBOL_GPL(power_supply_notifier);
 
 static struct device_type power_supply_dev_type;
 
+#define POWER_SUPPLY_DEFERRED_REGISTER_TIME	msecs_to_jiffies(10)
+
 static bool __power_supply_is_supplied_by(struct power_supply *supplier,
 					 struct power_supply *supply)
 {
@@ -121,6 +123,30 @@ void power_supply_changed(struct power_supply *psy)
 }
 EXPORT_SYMBOL_GPL(power_supply_changed);
 
+/*
+ * Notify that power supply was registered after parent finished the probing.
+ *
+ * Often power supply is registered from driver's probe function. However
+ * calling power_supply_changed() directly from power_supply_register()
+ * would lead to execution of get_property() function provided by the driver
+ * too early - before the probe ends.
+ *
+ * Avoid that by waiting on parent's mutex.
+ */
+static void power_supply_deferred_register_work(struct work_struct *work)
+{
+	struct power_supply *psy = container_of(work, struct power_supply,
+						deferred_register_work.work);
+
+	if (psy->dev.parent)
+		mutex_lock(&psy->dev.parent->mutex);
+
+	power_supply_changed(psy);
+
+	if (psy->dev.parent)
+		mutex_unlock(&psy->dev.parent->mutex);
+}
+
 #ifdef CONFIG_OF
 #include <linux/of.h>
 
@@ -645,6 +671,10 @@ __power_supply_register(struct device *parent,
 	struct power_supply *psy;
 	int rc;
 
+	if (!parent)
+		pr_warn("%s: Expected proper parent device for '%s'\n",
+			__func__, desc->name);
+
 	psy = kzalloc(sizeof(*psy), GFP_KERNEL);
 	if (!psy)
 		return ERR_PTR(-ENOMEM);
@@ -659,7 +689,6 @@ __power_supply_register(struct device *parent,
 	dev->release = power_supply_dev_release;
 	dev_set_drvdata(dev, psy);
 	psy->desc = desc;
-	atomic_inc(&psy->use_cnt);
 	if (cfg) {
 		psy->drv_data = cfg->drv_data;
 		psy->of_node = cfg->of_node;
@@ -672,6 +701,8 @@ __power_supply_register(struct device *parent,
 		goto dev_set_name_failed;
 
 	INIT_WORK(&psy->changed_work, power_supply_changed_work);
+	INIT_DELAYED_WORK(&psy->deferred_register_work,
+			  power_supply_deferred_register_work);
 
 	rc = power_supply_check_supplies(psy);
 	if (rc) {
@@ -700,7 +731,20 @@ __power_supply_register(struct device *parent,
 	if (rc)
 		goto create_triggers_failed;
 
-	power_supply_changed(psy);
+	/*
+	 * Update use_cnt after any uevents (most notably from device_add()).
+	 * We are here still during driver's probe but
+	 * the power_supply_uevent() calls back driver's get_property
+	 * method so:
+	 * 1. Driver did not assigned the returned struct power_supply,
+	 * 2. Driver could not finish initialization (anything in its probe
+	 *    after calling power_supply_register()).
+	 */
+	atomic_inc(&psy->use_cnt);
+
+	queue_delayed_work(system_power_efficient_wq,
+			   &psy->deferred_register_work,
+			   POWER_SUPPLY_DEFERRED_REGISTER_TIME);
 
 	return psy;
 
@@ -720,7 +764,8 @@ dev_set_name_failed:
 
 /**
  * power_supply_register() - Register new power supply
- * @parent:	Device to be a parent of power supply's device
+ * @parent:	Device to be a parent of power supply's device, usually
+ *		the device which probe function calls this
  * @desc:	Description of power supply, must be valid through whole
  *		lifetime of this power supply
  * @cfg:	Run-time specific configuration accessed during registering,
@@ -741,7 +786,8 @@ EXPORT_SYMBOL_GPL(power_supply_register);
 
 /**
  * power_supply_register() - Register new non-waking-source power supply
- * @parent:	Device to be a parent of power supply's device
+ * @parent:	Device to be a parent of power supply's device, usually
+ *		the device which probe function calls this
  * @desc:	Description of power supply, must be valid through whole
  *		lifetime of this power supply
  * @cfg:	Run-time specific configuration accessed during registering,
@@ -770,7 +816,8 @@ static void devm_power_supply_release(struct device *dev, void *res)
 
 /**
  * power_supply_register() - Register managed power supply
- * @parent:	Device to be a parent of power supply's device
+ * @parent:	Device to be a parent of power supply's device, usually
+ *		the device which probe function calls this
  * @desc:	Description of power supply, must be valid through whole
  *		lifetime of this power supply
  * @cfg:	Run-time specific configuration accessed during registering,
@@ -805,7 +852,8 @@ EXPORT_SYMBOL_GPL(devm_power_supply_register);
 
 /**
  * power_supply_register() - Register managed non-waking-source power supply
- * @parent:	Device to be a parent of power supply's device
+ * @parent:	Device to be a parent of power supply's device, usually
+ *		the device which probe function calls this
  * @desc:	Description of power supply, must be valid through whole
  *		lifetime of this power supply
  * @cfg:	Run-time specific configuration accessed during registering,
@@ -849,6 +897,7 @@ void power_supply_unregister(struct power_supply *psy)
 {
 	WARN_ON(atomic_dec_return(&psy->use_cnt));
 	cancel_work_sync(&psy->changed_work);
+	cancel_delayed_work_sync(&psy->deferred_register_work);
 	sysfs_remove_link(&psy->dev.kobj, "powers");
 	power_supply_remove_triggers(psy);
 	psy_unregister_cooler(psy);

drivers/regulator/core.c

@@ -779,7 +779,7 @@ static int suspend_prepare(struct regulator_dev *rdev, suspend_state_t state)
 static void print_constraints(struct regulator_dev *rdev)
 {
 	struct regulation_constraints *constraints = rdev->constraints;
-	char buf[80] = "";
+	char buf[160] = "";
 	int count = 0;
 	int ret;