commit fa0db8e568 upstream.
This reverts commit 28ab976911.
Sense data can be in either fixed format or descriptor format.
SAT-6 revision 1, "10.4.6 Control mode page", defines the D_SENSE bit:
"The SATL shall support this bit as defined in SPC-5 with the following
exception: if the D_ SENSE bit is set to zero (i.e., fixed format sense
data), then the SATL should return fixed format sense data for ATA
PASS-THROUGH commands."
The libata SATL has always kept D_SENSE set to zero by default. (It is
however possible to change the value using a MODE SELECT SG_IO command.)
Failed ATA PASS-THROUGH commands correctly respected the D_SENSE bit,
however, successful ATA PASS-THROUGH commands incorrectly returned the
sense data in descriptor format (regardless of the D_SENSE bit).
Commit 28ab976911 ("ata: libata-scsi: Honor the D_SENSE bit for
CK_COND=1 and no error") fixed this bug for successful ATA PASS-THROUGH
commands.
However, after commit 28ab976911 ("ata: libata-scsi: Honor the D_SENSE
bit for CK_COND=1 and no error"), there were bug reports that hdparm,
hddtemp, and udisks were no longer working as expected.
These applications incorrectly assume the returned sense data is in
descriptor format, without even looking at the RESPONSE CODE field in the
returned sense data (to see which format the returned sense data is in).
Considering that there will be broken versions of these applications around
roughly forever, we are stuck with being bug compatible with older kernels.
Cc: stable@vger.kernel.org # 4.19+
Reported-by: Stephan Eisvogel <eisvogel@seitics.de>
Reported-by: Christian Heusel <christian@heusel.eu>
Closes: https://lore.kernel.org/linux-ide/0bf3f2f0-0fc6-4ba5-a420-c0874ef82d64@heusel.eu/
Fixes: 28ab976911 ("ata: libata-scsi: Honor the D_SENSE bit for CK_COND=1 and no error")
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240813131900.1285842-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0c84bde4f3 upstream.
This reverts commit 2052138b7d.
This breaks the TeVii s480 dual DVB-S2 S660. The device has a bulk in
endpoint but no corresponding out endpoint, so the device does not pass
the "has both receive and send bulk endpoint" test.
Seemingly this device does not use dvb_usb_generic_rw() so I have tried
removing the generic_bulk_ctrl_endpoint entry, but this resulted in
different problems.
As we have no explanation yet, revert.
$ dmesg | grep -i -e dvb -e dw21 -e usb\ 4
[ 0.999122] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.023123] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.130247] usb 1-1: New USB device found, idVendor=9022, idProduct=d482,
+bcdDevice= 0.01
[ 1.130257] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.152323] usb 4-1: New USB device found, idVendor=9022, idProduct=d481,
+bcdDevice= 0.01
[ 1.152329] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 6.701033] dvb-usb: found a 'TeVii S480.2 USB' in cold state, will try to
+load a firmware
[ 6.701178] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[ 6.701179] dw2102: start downloading DW210X firmware
[ 6.703715] dvb-usb: found a 'Microsoft Xbox One Digital TV Tuner' in cold
+state, will try to load a firmware
[ 6.703974] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[ 6.756432] usb 1-1: USB disconnect, device number 2
[ 6.862119] dvb-usb: found a 'TeVii S480.2 USB' in warm state.
[ 6.862194] dvb-usb: TeVii S480.2 USB error while loading driver (-22)
[ 6.862209] dvb-usb: found a 'TeVii S480.1 USB' in cold state, will try to
+load a firmware
[ 6.862244] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[ 6.862245] dw2102: start downloading DW210X firmware
[ 6.914811] usb 4-1: USB disconnect, device number 2
[ 7.014131] dvb-usb: found a 'TeVii S480.1 USB' in warm state.
[ 7.014487] dvb-usb: TeVii S480.1 USB error while loading driver (-22)
[ 7.014538] usbcore: registered new interface driver dw2102
Closes: https://lore.kernel.org/stable/20240801165146.38991f60@mir/
Fixes: 2052138b7d ("media: dvb-usb: Fix unexpected infinite loop in dvb_usb_read_remote_control()")
Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fa4c500ce9 upstream.
The fix involves adding a null check for 'stream' at the beginning of
the function. If 'stream' is NULL, the function immediately returns
false. This ensures that 'stream' is not NULL when we dereference it to
access 'ctx' in 'dc = stream->ctx->dc;' the function.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c:398 dc_stream_program_cursor_position()
error: we previously assumed 'stream' could be null (see line 397)
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c
389 bool dc_stream_program_cursor_position(
390 struct dc_stream_state *stream,
391 const struct dc_cursor_position *position)
392 {
393 struct dc *dc;
394 bool reset_idle_optimizations = false;
395 const struct dc_cursor_position *old_position;
396
397 old_position = stream ? &stream->cursor_position : NULL;
^^^^^^^^
The patch adds a NULL check
--> 398 dc = stream->ctx->dc;
^^^^^^^^
The old code didn't check
399
400 if (dc_stream_set_cursor_position(stream, position)) {
401 dc_z10_restore(dc);
402
403 /* disable idle optimizations if enabling cursor */
404 if (dc->idle_optimizations_allowed &&
405 (!old_position->enable || dc->debug.exit_idle_opt_for_cursor_updates) &&
406 position->enable) {
407 dc_allow_idle_optimizations(dc, false);
Fixes: f63f86b5af ("drm/amd/display: Separate setting and programming of cursor")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e33697141b upstream.
[Why]
In dm resume, we firstly restore dc state and do the mst resume for topology
probing thereafter. If we change dpcd DP_MSTM_CTRL value after LT in mst reume,
it will cause light up problem on the hub.
[How]
Revert commit 202dc359ad ("drm/amd/display: Defer handling mst up request in resume").
And adjust the reason to trigger dc_link_detect by DETECT_REASON_RESUMEFROMS3S4.
Cc: stable@vger.kernel.org
Fixes: 202dc359ad ("drm/amd/display: Defer handling mst up request in resume")
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3eb3cd5992 ]
Commit 04d82a6d08 ("binfmt_flat: allow not offsetting data start")
introduced a RISC-V specific variant of the FLAT format which does
not allocate any space for the (obsolete) array of shared library
pointers. However, it did not disable the code which initializes the
array, resulting in the corruption of sizeof(long) bytes before the DATA
segment, generally the end of the TEXT segment.
Introduce MAX_SHARED_LIBS_UPDATE which depends on the state of
CONFIG_BINFMT_FLAT_NO_DATA_START_OFFSET to guard the initialization of
the shared library pointer region so that it will only be initialized
if space is reserved for it.
Fixes: 04d82a6d08 ("binfmt_flat: allow not offsetting data start")
Co-developed-by: Stefan O'Rear <sorear@fastmail.com>
Signed-off-by: Stefan O'Rear <sorear@fastmail.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Link: https://lore.kernel.org/r/20240807195119.it.782-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7cc06e7294 ]
Calling VPC commands consists of several VPCW and VPCR ACPI calls.
These calls and their results can get mixed up if they are called
simultaneously from different threads, like acpi notify handler,
sysfs, debugfs, notification chain.
The commit e2ffcda162 ("ACPI: OSL: Allow Notify () handlers to run on
all CPUs") made the race issues much worse than before it but some
races were possible even before that commit.
Add a mutex to synchronize VPC commands.
Fixes: e2ffcda162 ("ACPI: OSL: Allow Notify () handlers to run on all CPUs")
Fixes: e82882cdd2 ("platform/x86: Add driver for Yoga Tablet Mode switch")
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/f26782fa1194ad11ed5d9ba121a804e59b58b026.1721898747.git.soyer@irl.hu
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cde7886b35 ]
Some models need to trigger the EC after each YMC event for the yoga
mode control to work properly. EC triggering consist of a VPC call from
the lenovo-ymc module. Except for this, all VPC calls are in the
ideapad-laptop module.
Since ideapad-laptop has a notification chain, a new YMC_EVENT action
can be added and triggered from the lenovo-ymc module. Then the
ideapad-laptop can trigger the EC.
If the triggering is in the ideapad-laptop module, then the ec_trigger
module parameter should be there as well.
Move the ymc_trigger_ec functionality and the ec_trigger module
parameter to the ideapad-laptop module.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/d980ab3ac32b5e554f456b0ff17279bfdbe2a203.1721898747.git.soyer@irl.hu
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Stable-dep-of: 7cc06e7294 ("platform/x86: ideapad-laptop: add a mutex to synchronize VPC commands")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78296429e2 ]
If the Ambient Light Sensor (ALS) is disabled, the current code in the PMF
driver does not query for Human Presence Detection (HPD) data in
amd_pmf_get_sensor_info(). As a result, stale HPD data is used by PMF-TA
to evaluate policy conditions, leading to unexpected behavior in the policy
output actions.
To resolve this issue, modify the PMF driver to query HPD data
independently of ALS.
Since user_present is a boolean, modify the current code to return true if
the user is present and false if the user is away or if the sensor is not
detected, and report this status to the PMF TA firmware accordingly.
With this change, amd_pmf_get_sensor_info() now returns void instead of
int.
Fixes: cedecdba60 ("platform/x86/amd/pmf: Get ambient light information from AMD SFH driver")
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240730142316.3846259-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce6dede912 ]
[syzbot reported]
general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 5061 Comm: syz-executor404 Not tainted 6.8.0-syzkaller-08951-gfe46a7dd189e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
RIP: 0010:dtInsertEntry+0xd0c/0x1780 fs/jfs/jfs_dtree.c:3713
...
[Analyze]
In dtInsertEntry(), when the pointer h has the same value as p, after writing
name in UniStrncpy_to_le(), p->header.flag will be cleared. This will cause the
previously true judgment "p->header.flag & BT-LEAF" to change to no after writing
the name operation, this leads to entering an incorrect branch and accessing the
uninitialized object ih when judging this condition for the second time.
[Fix]
After got the page, check freelist first, if freelist == 0 then exit dtInsert()
and return -EINVAL.
Reported-by: syzbot+bba84aef3a26fb93deb9@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd89a81d85 ]
Drop the WARN_ON_ONCE inn gue_gro_receive if the encapsulated type is
not known or does not have a GRO handler.
Such a packet is easily constructed. Syzbot generates them and sets
off this warning.
Remove the warning as it is expected and not actionable.
The warning was previously reduced from WARN_ON to WARN_ON_ONCE in
commit 270136613b ("fou: Do WARN_ON_ONCE in gue_gro_receive for bad
proto callbacks").
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240614122552.1649044-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc01008c92 ]
syzbot reports a f2fs bug as below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/inline.c:258!
CPU: 1 PID: 34 Comm: kworker/u8:2 Not tainted 6.9.0-rc6-syzkaller-00012-g9e4bc4bcae01 #0
RIP: 0010:f2fs_write_inline_data+0x781/0x790 fs/f2fs/inline.c:258
Call Trace:
f2fs_write_single_data_page+0xb65/0x1d60 fs/f2fs/data.c:2834
f2fs_write_cache_pages fs/f2fs/data.c:3133 [inline]
__f2fs_write_data_pages fs/f2fs/data.c:3288 [inline]
f2fs_write_data_pages+0x1efe/0x3a90 fs/f2fs/data.c:3315
do_writepages+0x35b/0x870 mm/page-writeback.c:2612
__writeback_single_inode+0x165/0x10b0 fs/fs-writeback.c:1650
writeback_sb_inodes+0x905/0x1260 fs/fs-writeback.c:1941
wb_writeback+0x457/0xce0 fs/fs-writeback.c:2117
wb_do_writeback fs/fs-writeback.c:2264 [inline]
wb_workfn+0x410/0x1090 fs/fs-writeback.c:2304
process_one_work kernel/workqueue.c:3254 [inline]
process_scheduled_works+0xa12/0x17c0 kernel/workqueue.c:3335
worker_thread+0x86d/0xd70 kernel/workqueue.c:3416
kthread+0x2f2/0x390 kernel/kthread.c:388
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
The root cause is: inline_data inode can be fuzzed, so that there may
be valid blkaddr in its direct node, once f2fs triggers background GC
to migrate the block, it will hit f2fs_bug_on() during dirty page
writeback.
Let's add sanity check on F2FS_INLINE_DATA flag in inode during GC,
so that, it can forbid migrating inline_data inode's data block for
fixing.
Reported-by: syzbot+848062ba19c8782ca5c8@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-f2fs-devel/000000000000d103ce06174d7ec3@google.com
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7697a0fe01 upstream.
Chromium sandbox apparently wants to deny statx [1] so it could properly
inspect arguments after the sandboxed process later falls back to fstat.
Because there's currently not a "fd-only" version of statx, so that the
sandbox has no way to ensure the path argument is empty without being
able to peek into the sandboxed process's memory. For architectures able
to do newfstatat though, glibc falls back to newfstatat after getting
-ENOSYS for statx, then the respective SIGSYS handler [2] takes care of
inspecting the path argument, transforming allowed newfstatat's into
fstat instead which is allowed and has the same type of return value.
But, as LoongArch is the first architecture to not have fstat nor
newfstatat, the LoongArch glibc does not attempt falling back at all
when it gets -ENOSYS for statx -- and you see the problem there!
Actually, back when the LoongArch port was under review, people were
aware of the same problem with sandboxing clone3 [3], so clone was
eventually kept. Unfortunately it seemed at that time no one had noticed
statx, so besides restoring fstat/newfstatat to LoongArch uapi (and
postponing the problem further), it seems inevitable that we would need
to tackle seccomp deep argument inspection.
However, this is obviously a decision that shouldn't be taken lightly,
so we just restore fstat/newfstatat by defining __ARCH_WANT_NEW_STAT
in unistd.h. This is the simplest solution for now, and so we hope the
community will tackle the long-standing problem of seccomp deep argument
inspection in the future [4][5].
Also add "newstat" to syscall_abis_64 in Makefile.syscalls due to
upstream asm-generic changes.
More infomation please reading this thread [6].
[1] https://chromium-review.googlesource.com/c/chromium/src/+/2823150
[2] https://chromium.googlesource.com/chromium/src/sandbox/+/c085b51940bd/linux/seccomp-bpf-helpers/sigsys_handlers.cc#355
[3] https://lore.kernel.org/linux-arch/20220511211231.GG7074@brightrain.aerifal.cx/
[4] https://lwn.net/Articles/799557/
[5] https://lpc.events/event/4/contributions/560/attachments/397/640/deep-arg-inspection.pdf
[6] https://lore.kernel.org/loongarch/20240226-granit-seilschaft-eccc2433014d@brauner/T/#t
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f63f86b5af upstream.
We're seeing issues when user-space tries to do an atomic update of
the primary surface, as well as the cursor. These two updates are
separate calls into DC and don't currently act as an atomic update.
This might lead to cursor updates being locked out and cursors
stuttering.
In order to solve this problem we want to separate the setting
and programming of cursor attributes and position. That's what
we're doing in this patch. The subsequent patch will then be
able to use the cursor setters in independent cursor updates,
as well as in atomic commits.
Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Kevin Holm <kevin@holm.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 202dc359ad upstream.
[Why]
Like commit ec5fa9fcde ("drm/amd/display: Adjust the MST resume flow"), we
want to avoid handling mst topology changes before restoring the old state.
If we enable DP_UP_REQ_EN before calling drm_atomic_helper_resume(), have
changce to handle CSN event first and fire hotplug event before restoring the
cached state.
[How]
Disable mst branch sending up request event before we restoring the cached state.
DP_UP_REQ_EN will be set later when we call drm_dp_mst_topology_mgr_resume().
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f50733b45d upstream.
When opening a file for exec via do_filp_open(), permission checking is
done against the file's metadata at that moment, and on success, a file
pointer is passed back. Much later in the execve() code path, the file
metadata (specifically mode, uid, and gid) is used to determine if/how
to set the uid and gid. However, those values may have changed since the
permissions check, meaning the execution may gain unintended privileges.
For example, if a file could change permissions from executable and not
set-id:
---------x 1 root root 16048 Aug 7 13:16 target
to set-id and non-executable:
---S------ 1 root root 16048 Aug 7 13:16 target
it is possible to gain root privileges when execution should have been
disallowed.
While this race condition is rare in real-world scenarios, it has been
observed (and proven exploitable) when package managers are updating
the setuid bits of installed programs. Such files start with being
world-executable but then are adjusted to be group-exec with a set-uid
bit. For example, "chmod o-x,u+s target" makes "target" executable only
by uid "root" and gid "cdrom", while also becoming setuid-root:
-rwxr-xr-x 1 root cdrom 16048 Aug 7 13:16 target
becomes:
-rwsr-xr-- 1 root cdrom 16048 Aug 7 13:16 target
But racing the chmod means users without group "cdrom" membership can
get the permission to execute "target" just before the chmod, and when
the chmod finishes, the exec reaches brpm_fill_uid(), and performs the
setuid to root, violating the expressed authorization of "only cdrom
group members can setuid to root".
Re-check that we still have execute permissions in case the metadata
has changed. It would be better to keep a copy from the perm-check time,
but until we can do that refactoring, the least-bad option is to do a
full inode_permission() call (under inode lock). It is understood that
this is safe against dead-locks, but hardly optimal.
Reported-by: Marco Vanotti <mvanotti@google.com>
Tested-by: Marco Vanotti <mvanotti@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d2868b5d1 upstream.
It should be quite uncommon to set both the subflow and the signal
flags: the initiator of the connection is typically the one creating new
subflows, not the other peer, then no need to announce additional local
addresses, and use it to create subflows.
But some people might be confused about the flags, and set both "just to
be sure at least the right one is set". To verify the previous fix, and
avoid future regressions, this specific case is now validated: the
client announces a new address, and initiates a new subflow from the
same address.
While working on this, another bug has been noticed, where the client
reset the new subflow because an ADD_ADDR echo got received as the 3rd
ACK: this new test also explicitly checks that no RST have been sent by
the client and server.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 86e39e0448 ("mptcp: keep track of local endpoint still available for each msk")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-7-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bec1f3b119 upstream.
In the following commit, the client will initiate the ADD_ADDR, instead
of the server. We need to way to verify the ADD_ADDR have been correctly
sent.
Note: the default expected counters for when the port number is given
are never changed by the caller, no need to accept them as parameter
then.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 86e39e0448 ("mptcp: keep track of local endpoint still available for each msk")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-6-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 85df533a78 upstream.
Up to the 'Fixes' commit, having an endpoint with both the 'signal' and
'subflow' flags, resulted in the creation of a subflow and an address
announcement using the address linked to this endpoint. After this
commit, only the address announcement was done, ignoring the 'subflow'
flag.
That's because the same bitmap is used for the two flags. It is OK to
keep this single bitmap, the already selected local endpoint simply have
to be re-used, but not via select_local_address() not to look at the
just modified bitmap.
Note that it is unusual to set the two flags together: creating a new
subflow using a new local address will implicitly advertise it to the
other peer. So in theory, no need to advertise it explicitly as well.
Maybe there are use-cases -- the subflow might not reach the other peer
that way, we can ask the other peer to try initiating the new subflow
without delay -- or very likely the user is confused, and put both flags
"just to be sure at least the right one is set". Still, if it is
allowed, the kernel should do what has been asked: using this endpoint
to announce the address and to create a new subflow from it.
An alternative is to forbid the use of the two flags together, but
that's probably too late, there are maybe use-cases, and it was working
before. This patch will avoid people complaining subflows are not
created using the endpoint they added with the 'subflow' and 'signal'
flag.
Note that with the current patch, the subflow might not be created in
some corner cases, e.g. if the 'subflows' limit was reached when sending
the ADD_ADDR, but changed later on. It is probably not worth splitting
id_avail_bitmap per target ('signal', 'subflow'), which will add another
large field to the msk "just" to track (again) endpoints. Anyway,
currently when the limits are changed, the kernel doesn't check if new
subflows can be created or removed, because we would need to keep track
of the received ADD_ADDR, and more. It sounds OK to assume that the
limits should be properly configured before establishing new
connections.
Fixes: 86e39e0448 ("mptcp: keep track of local endpoint still available for each msk")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-5-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3cc88e8405 upstream.
The initialization of vport interrupt consists of two functions:
1) idpf_vport_intr_init() where a generic configuration is done
2) idpf_vport_intr_req_irq() where the irq for each q_vector is
requested.
The first function used to create a base name for each interrupt using
"kasprintf()" call. Unfortunately, although that call allocated memory
for a text buffer, that memory was never released.
Fix this by removing creating the interrupt base name in 1).
Instead, always create a full interrupt name in the function 2), because
there is no need to create a base name separately, considering that the
function 2) is never called out of idpf_vport_intr_init() context.
Fixes: d4d5587182 ("idpf: initialize interrupts and enable vport")
Cc: stable@vger.kernel.org # 6.7
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240806220923.3359860-3-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 939b656bc8 upstream.
During an append (O_APPEND write flag) direct IO write if the input buffer
was not previously faulted in, we can corrupt the file in a way that the
final size is unexpected and it includes an unexpected hole.
The problem happens like this:
1) We have an empty file, with size 0, for example;
2) We do an O_APPEND direct IO with a length of 4096 bytes and the input
buffer is not currently faulted in;
3) We enter btrfs_direct_write(), lock the inode and call
generic_write_checks(), which calls generic_write_checks_count(), and
that function sets the iocb position to 0 with the following code:
if (iocb->ki_flags & IOCB_APPEND)
iocb->ki_pos = i_size_read(inode);
4) We call btrfs_dio_write() and enter into iomap, which will end up
calling btrfs_dio_iomap_begin() and that calls
btrfs_get_blocks_direct_write(), where we update the i_size of the
inode to 4096 bytes;
5) After btrfs_dio_iomap_begin() returns, iomap will attempt to access
the page of the write input buffer (at iomap_dio_bio_iter(), with a
call to bio_iov_iter_get_pages()) and fail with -EFAULT, which gets
returned to btrfs at btrfs_direct_write() via btrfs_dio_write();
6) At btrfs_direct_write() we get the -EFAULT error, unlock the inode,
fault in the write buffer and then goto to the label 'relock';
7) We lock again the inode, do all the necessary checks again and call
again generic_write_checks(), which calls generic_write_checks_count()
again, and there we set the iocb's position to 4K, which is the current
i_size of the inode, with the following code pointed above:
if (iocb->ki_flags & IOCB_APPEND)
iocb->ki_pos = i_size_read(inode);
8) Then we go again to btrfs_dio_write() and enter iomap and the write
succeeds, but it wrote to the file range [4K, 8K), leaving a hole in
the [0, 4K) range and an i_size of 8K, which goes against the
expectations of having the data written to the range [0, 4K) and get an
i_size of 4K.
Fix this by not unlocking the inode before faulting in the input buffer,
in case we get -EFAULT or an incomplete write, and not jumping to the
'relock' label after faulting in the buffer - instead jump to a location
immediately before calling iomap, skipping all the write checks and
relocking. This solves this problem and it's fine even in case the input
buffer is memory mapped to the same file range, since only holding the
range locked in the inode's io tree can cause a deadlock, it's safe to
keep the inode lock (VFS lock), as was fixed and described in commit
51bd9563b6 ("btrfs: fix deadlock due to page faults during direct IO
reads and writes").
A sample reproducer provided by a reporter is the following:
$ cat test.c
#ifndef _GNU_SOURCE
#define _GNU_SOURCE
#endif
#include <fcntl.h>
#include <stdio.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <unistd.h>
int main(int argc, char *argv[])
{
if (argc < 2) {
fprintf(stderr, "Usage: %s <test file>\n", argv[0]);
return 1;
}
int fd = open(argv[1], O_WRONLY | O_CREAT | O_TRUNC | O_DIRECT |
O_APPEND, 0644);
if (fd < 0) {
perror("creating test file");
return 1;
}
char *buf = mmap(NULL, 4096, PROT_READ,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
ssize_t ret = write(fd, buf, 4096);
if (ret < 0) {
perror("pwritev2");
return 1;
}
struct stat stbuf;
ret = fstat(fd, &stbuf);
if (ret < 0) {
perror("stat");
return 1;
}
printf("size: %llu\n", (unsigned long long)stbuf.st_size);
return stbuf.st_size == 4096 ? 0 : 1;
}
A test case for fstests will be sent soon.
Reported-by: Hanna Czenczek <hreitz@redhat.com>
Link: https://lore.kernel.org/linux-btrfs/0b841d46-12fe-4e64-9abb-871d8d0de271@redhat.com/
Fixes: 8184620ae2 ("btrfs: fix lost file sync on direct IO write with nowait and dsync iocb")
CC: stable@vger.kernel.org # 6.1+
Tested-by: Hanna Czenczek <hreitz@redhat.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8af1f11865 upstream.
As mentioned in the 'Fixes' commit, the port flag is only supported by
the 'signal' flag, and not by the 'subflow' one. Then if both the
'signal' and 'subflow' flags are set, the problem is the same: the
feature cannot work with the 'subflow' flag.
Technically, if both the 'signal' and 'subflow' flags are set, it will
be possible to create the listening socket, but not to establish a
subflow using this source port. So better to explicitly deny it, not to
create some confusions because the expected behaviour is not possible.
Fixes: 09f12c3ab7 ("mptcp: allow to use port and non-signal in set_flags")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-2-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d67c5649c1 upstream.
Before this patch, receiving an ADD_ADDR echo on the just connected
MP_JOIN subflow -- initiator side, after the MP_JOIN 3WHS -- was
resulting in an MP_RESET. That's because only ACKs with a DSS or
ADD_ADDRs without the echo bit were allowed.
Not allowing the ADD_ADDR echo after an MP_CAPABLE 3WHS makes sense, as
we are not supposed to send an ADD_ADDR before because it requires to be
in full established mode first. For the MP_JOIN 3WHS, that's different:
the ADD_ADDR can be sent on a previous subflow, and the ADD_ADDR echo
can be received on the recently created one. The other peer will already
be in fully established, so it is allowed to send that.
We can then relax the conditions here to accept the ADD_ADDR echo for
MPJ subflows.
Fixes: 67b12f792d ("mptcp: full fully established support after ADD_ADDR")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-1-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2bac084468 upstream.
Work for __counted_by on generic pointers in structures (not just
flexible array members) has started landing in Clang 19 (current tip of
tree). During the development of this feature, a restriction was added
to __counted_by to prevent the flexible array member's element type from
including a flexible array member itself such as:
struct foo {
int count;
char buf[];
};
struct bar {
int count;
struct foo data[] __counted_by(count);
};
because the size of data cannot be calculated with the standard array
size formula:
sizeof(struct foo) * count
This restriction was downgraded to a warning but due to CONFIG_WERROR,
it can still break the build. The application of __counted_by on the
states member of 'struct _StateArray' triggers this restriction,
resulting in:
drivers/gpu/drm/radeon/pptable.h:442:5: error: 'counted_by' should not be applied to an array with element of unknown size because 'ATOM_PPLIB_STATE_V2' (aka 'struct _ATOM_PPLIB_STATE_V2') is a struct type with a flexible array member. This will be an error in a future compiler version [-Werror,-Wbounds-safety-counted-by-elt-type-unknown-size]
442 | ATOM_PPLIB_STATE_V2 states[] __counted_by(ucNumEntries);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
Remove this use of __counted_by to fix the warning/error. However,
rather than remove it altogether, leave it commented, as it may be
possible to support this in future compiler releases.
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/2028
Fixes: efade6fe50 ("drm/radeon: silence UBSAN warning (v3)")
Signed-off-by: Bill Wendling <morbo@google.com>
Co-developed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman