The files generated by gen_header.py capture the source path to the
input files and the date. While that can be informative, it varies
based on where and when the kernel was built as the full path is
captured.
Since all of the files that this tool is run on is under the drivers
directory, this modifies the application to strip all of the path before
drivers. Additionally it prints <stripped> instead of the date.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Viswanath Kraleti <viswanath.kraleti@oss.qualcomm.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/655599/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Calling this packet is necessary when we switch contexts because there
are various pieces of state used by userspace to synchronize between BR
and BV that are persistent across submits and we need to make sure that
they are in a "safe" state when switching contexts. Otherwise a
userspace submission in one context could cause another context to
function incorrectly and hang, effectively a denial of service (although
without leaking data). This was missed during initial a7xx bringup.
Fixes: af66706acc ("drm/msm/a6xx: Add skeleton A7xx support")
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/654924/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Improve the usability of the unit_add sysfs attribute by ensuring that
the associated FCP LUN scan processing is completed synchronously. This
enables configuration tooling to consistently determine the end of the
scan process to allow for serialization of follow-on actions.
While the scan process associated with unit_add typically completes
synchronously, it is deferred to an asynchronous background process if
unit_add is used before initial remote port scanning has completed. This
occurs when unit_add is used immediately after setting the associated FCP
device online.
To ensure synchronous unit_add processing, wait for remote port scanning
to complete before initiating the FCP LUN scan.
Cc: stable@vger.kernel.org
Reviewed-by: M Nikhil <nikh1092@linux.ibm.com>
Reviewed-by: Nihar Panda <niharp@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Nihar Panda <niharp@linux.ibm.com>
Link: https://lore.kernel.org/r/20250603182252.2287285-2-niharp@linux.ibm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Correct the error handling goto labels used when host lookup fails in
various flashnode-related event handlers:
- iscsi_new_flashnode()
- iscsi_del_flashnode()
- iscsi_login_flashnode()
- iscsi_logout_flashnode()
- iscsi_logout_flashnode_sid()
scsi_host_put() is not required when shost is NULL, so jumping to the
correct label avoids unnecessary operations. These functions previously
jumped to the wrong goto label (put_host), which did not match the
intended cleanup logic.
Use the correct exit labels (exit_new_fnode, exit_del_fnode, etc.) to
ensure proper error handling. Also remove the unused put_host label
under iscsi_new_flashnode() as it is no longer needed.
No functional changes beyond accurate error path correction.
Fixes: c6a4bb2ef5 ("[SCSI] scsi_transport_iscsi: Add flash node mgmt support")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://lore.kernel.org/r/20250530193012.3312911-1-alok.a.tiwari@oracle.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When things go wrong, the GPU is capable of quickly generating millions
of faulting translation requests per second. When that happens, in the
stall-on-fault model each access will stall until it wins the race to
signal the fault and then the RESUME register is written. This slows
processing page faults to a crawl as the GPU can generate faults much
faster than the CPU can acknowledge them. It also means that all
available resources in the SMMU are saturated waiting for the stalled
transactions, so that other transactions such as transactions generated
by the GMU, which shares translation resources with the GPU, cannot
proceed. This causes a GMU watchdog timeout, which leads to a failed
reset because GX cannot collapse when there is a transaction pending and
a permanently hung GPU.
On older platforms with qcom,smmu-v2, it seems that when one transaction
is stalled subsequent faulting transactions are terminated, which avoids
this problem, but the MMU-500 follows the spec here.
To work around these problems, disable stall-on-fault as soon as we get a
page fault until a cooldown period after pagefaults stop. This allows
the GMU some guaranteed time to continue working. We only use
stall-on-fault to halt the GPU while we collect a devcoredump and we
always terminate the transaction afterward, so it's fine to miss some
subsequent page faults. We also keep it disabled so long as the current
devcoredump hasn't been deleted, because in that case we likely won't
capture another one if there's a fault.
After this commit HFI messages still occasionally time out, because the
crashdump handler doesn't run fast enough to let the GMU resume, but the
driver seems to recover from it. This will probably go away after the
HFI timeout is increased.
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/654891/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Merge series from Félix Piédallu <felix.piedallu@non.se.com>:
These patches fix the behaviour of the SPI Chip Select of the OMAP2 MCSPI
driver used on TI SoCs.
The omap2-mcspi driver supports the use of multi mode (multichannel in TI
documentation). In this mode, the CS is asserted and deasserted by the
hardware.
The multi mode is disabled for messages when cs_change=0 for all transfers
(e.g when CS is kept asserted between transfers of a same message).
The multi mode also needs to be disabled for messages when cs_change=1 on the
last transfer (e.g when CS is kept asserted after the WHOLE message), and the
message right after.
Currently, that is not the case and it CS is deasserted by hardware when it
shouldn't.
This breaks peripheral drivers that send multiple messages with the CS asserted
in between.
Patch 1 ensures that multi mode is disabled when cs_change=1 on the last
transfer of the message.
Patch 2 ensures that multi mode is disable on a message following one with
cs_change=1 on the last transfer.
This is the case for the TPM TIS SPI driver that uses this logic for flow
control purposes.
Tested on an AM6442 platform with a TPM ST33HTPH2X32AHE4.
The cxlctl_validate_set_features() function is type bool. It's supposed
to return true for valid requests and false for invalid. However, this
error path returns ERR_PTR(-EINVAL) which is true when it was intended to
return false.
The incorrect return will result in kernel failing to prevent a
incorrect op_size passed in from userspace to be detected.
[ dj: Add user impact to commit log ]
Fixes: f76e0bbc8b ("cxl: Update prototype of function get_support_feature_info()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/aDbFPSCujpJLY1if@stanley.mountain
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
While the GCC and Clang compilers already define __ASSEMBLER__
automatically when compiling assembly code, __ASSEMBLY__ is a
macro that only gets defined by the Makefiles in the kernel.
This can be very confusing when switching between userspace
and kernelspace coding, or when dealing with uapi headers that
rather should use __ASSEMBLER__ instead. So let's standardize on
the __ASSEMBLER__ macro that is provided by the compilers now.
This is a completely mechanical patch (done with a simple "sed -i"
statement).
Cc: linux-snps-arc@lists.infradead.org
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
__ASSEMBLY__ is only defined by the Makefile of the kernel, so
this is not really useful for uapi headers (unless the userspace
Makefile defines it, too). Let's switch to __ASSEMBLER__ which
gets set automatically by the compiler when compiling assembly
code.
Cc: linux-snps-arc@lists.infradead.org
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
The custom swap function used in sort() was identical to the default
built-in sort swap. Remove the custom swap function and passes NULL to
sort(), allowing it to use the default swap function.
This change reduces code size and improves performance, particularly when
CONFIG_MITIGATION_RETPOLINE is enabled. With RETPOLINE mitigation, indirect
function calls incur significant overhead, and using the default swap
function avoids this cost.
$ ./scripts/bloat-o-meter ./unwind.o.old ./unwind.o.new
add/remove: 0/1 grow/shrink: 0/1 up/down: 0/-22 (-22)
Function old new delta
init_unwind_hdr.constprop 544 540 -4
swap_eh_frame_hdr_table_entries 18 - -18
Total: Before=4410, After=4388, chg -0.50%
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
The core atomic code has a number of macros where it elaborates
architecture primitives into more functions. ARC uses
arch_atomic64_cmpxchg() as it's architecture primitive which disable alot
of the additional functions.
Instead provide arch_cmpxchg64_relaxed() as the primitive and rely on the
core macros to create arch_cmpxchg64().
The macros will also provide other functions, for instance,
try_cmpxchg64_release(), giving a more complete implementation.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/Z0747n5bSep4_1VX@J2N7QTR9R3
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
When FRED is enabled, if the Trap Flag (TF) is set without an external
debugger attached, it can lead to an infinite loop in the SIGTRAP
handler. To avoid this, the software event flag in the augmented SS
must be cleared, ensuring that no single-step trap remains pending when
ERETU completes.
This test checks for that specific scenario—verifying whether the kernel
correctly prevents an infinite SIGTRAP loop in this edge case when FRED
is enabled.
The test should _always_ pass with IDT event delivery, thus no need to
disable the test even when FRED is not enabled.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250609084054.2083189-3-xin%40zytor.com
Clear the software event flag in the augmented SS to prevent immediate
repeat of single step trap on return from SIGTRAP handler if the trap
flag (TF) is set without an external debugger attached.
Following is a typical single-stepping flow for a user process:
1) The user process is prepared for single-stepping by setting
RFLAGS.TF = 1.
2) When any instruction in user space completes, a #DB is triggered.
3) The kernel handles the #DB and returns to user space, invoking the
SIGTRAP handler with RFLAGS.TF = 0.
4) After the SIGTRAP handler finishes, the user process performs a
sigreturn syscall, restoring the original state, including
RFLAGS.TF = 1.
5) Goto step 2.
According to the FRED specification:
A) Bit 17 in the augmented SS is designated as the software event
flag, which is set to 1 for FRED event delivery of SYSCALL,
SYSENTER, or INT n.
B) If bit 17 of the augmented SS is 1 and ERETU would result in
RFLAGS.TF = 1, a single-step trap will be pending upon completion
of ERETU.
In step 4) above, the software event flag is set upon the sigreturn
syscall, and its corresponding ERETU would restore RFLAGS.TF = 1.
This combination causes a pending single-step trap upon completion of
ERETU. Therefore, another #DB is triggered before any user space
instruction is executed, which leads to an infinite loop in which the
SIGTRAP handler keeps being invoked on the same user space IP.
Fixes: 14619d912b ("x86/fred: FRED entry/exit and dispatch code")
Suggested-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250609084054.2083189-2-xin%40zytor.com
When swiotlb buffer is full, the dma_map_sg() returns 0 to
msdc_prepare_data(), but it does not check it and sets the
MSDC_PREPARE_FLAG.
swiotlb_tbl_map_single() /* prints "swiotlb buffer is full" */
<-swiotlb_map()
<-dma_direct_map_page()
<-dma_direct_map_sg()
<-__dma_map_sg_attrs()
<-dma_map_sg_attrs()
<-dma_map_sg() /* returns 0 (pages mapped) */
<-msdc_prepare_data()
Then, the msdc_unprepare_data() checks MSDC_PREPARE_FLAG and calls
dma_unmap_sg() with unmapped pages. It causes a page fault.
To fix this problem, Do not set MSDC_PREPARE_FLAG if dma_map_sg()
fails because this is not prepared.
Fixes: 208489032b ("mmc: mediatek: Add Mediatek MMC driver")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Tested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/174908565814.4056588.769599127120955383.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The notifier callback node allocation is currently done while holding
the notify_lock mutex. While this is safe even if memory allocation may
sleep, we need to move the allocation outside the locked region in
preparation to move from using muxtes to rwlocks.
Move the memory allocation to avoid potential sleeping in atomic context
once the locks are moved from mutex to rwlocks.
Fixes: e0573444ed ("firmware: arm_ffa: Add interfaces to request notification callbacks")
Message-Id: <20250528-ffa_notif_fix-v1-2-5ed7bc7f8437@arm.com>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Commit e0573444ed ("firmware: arm_ffa: Add interfaces to request
notification callbacks") adds support for notifier callbacks by allocating
and inserting a callback node into a hashtable during registration of
notifiers. However, during unregistration, the code only removes the
node from the hashtable without freeing the associated memory, resulting
in a memory leak.
Resolve the memory leak issue by ensuring the allocated notifier callback
node is properly freed after it is removed from the hashtable entry.
Fixes: e0573444ed ("firmware: arm_ffa: Add interfaces to request notification callbacks")
Message-Id: <20250528-ffa_notif_fix-v1-1-5ed7bc7f8437@arm.com>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
For the RK3588 HDMI controller, the falling edge of DDC SDA and SCL
almost coincide and cannot be adjusted by HDMI registrer, resulting
in poor compatibility of DDC communication.
An improvement of the compatibility of DDC can be done by increasing
the driver strength of SCL and decreasing the driver strength of SDA
to increase the slope of the falling edge.
It should be noted that the maximum driving strength of hdmim0_tx1_scl
is only 3, which is different from that of the other IOs.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250522020537.1884771-1-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
pcie0 already used 0 as its pci-domain, so pcie1 will fail to
allocate the same pci-domain if both of them are used.
rk-pcie 2a210000.pcie: PCIe Link up, LTSSM is 0x130011
rk-pcie 2a210000.pcie: PCIe Gen.2 x1 link up
rk-pcie 2a210000.pcie: Scanning root bridge failed
rk-pcie 2a210000.pcie: failed to initialize host
Fixes: d4b9fc2af4 ("arm64: dts: rockchip: Add rk3576 pcie nodes")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://lore.kernel.org/r/1748918140-212263-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Currently hsmp_send_message() uses down_timeout() with a 100ms timeout
to take the semaphore. However __hsmp_send_message(), the content of the
critical section, has a sleep in it. On systems with significantly
delayed scheduling behaviour this may take over 100ms.
Convert this method to down_interruptible(). Leave the error handling
the same as the documentation currently is not specific about what error
is returned.
Previous behaviour: a caller who competes with another caller stuck in
the critical section due to scheduler delays would receive -ETIME.
New behaviour: a caller who competes with another caller stuck in the
critical section due to scheduler delays will complete successfully.
Reviewed-by: Suma Hegde <suma.hegde@amd.com>
Tested-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Jake Hillion <jake@hillion.co.uk>
Link: https://lore.kernel.org/r/20250605-amd-hsmp-v2-2-a811bc3dd74a@hillion.co.uk
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
__hsmp_send_message sleeps between result read attempts and has a
timeout of 100ms. Under extreme load it's possible for these sleeps to
take a long time, exceeding the 100ms. In this case the current code
does not check the register and fails with ETIMEDOUT.
Refactor the loop to ensure there is at least one read of the register
after a sleep of any duration. This removes instances of ETIMEDOUT with
a single caller, even with a misbehaving scheduler. Tested on AMD
Bergamo machines.
Suggested-by: Blaise Sanouillet <linux@blaise.sanouillet.com>
Reviewed-by: Suma Hegde <suma.hegde@amd.com>
Tested-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Jake Hillion <jake@hillion.co.uk>
Link: https://lore.kernel.org/r/20250605-amd-hsmp-v2-1-a811bc3dd74a@hillion.co.uk
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The area of memory that contains the metrics table may contain garbage
when the cycle starts. This normally doesn't matter because the cycle
itself will populate it with valid data, however commit 9f5595d5f0
("platform/x86/amd: pmc: Require at least 2.5 seconds between HW sleep
cycles") started to use it during the check() phase. Depending upon
what garbage is in the table it's possible that the system will wait
2.5 seconds for even the first cycle, which will be visible to a user.
To prevent this from happening explicitly clear the table when logging
is started.
Fixes: 9f5595d5f0 ("platform/x86/amd: pmc: Require at least 2.5 seconds between HW sleep cycles")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250603132412.3555302-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Rob Clark