Merge an urgent cpupower utility fix for 6.16-rc1 from Shuah Khan:
"Add unitdir variable for specifying the location to install systemd
service units instead of installing under ${libdir}/systemd/system
which doesn't work on some distributions."
* tag 'linux-cpupower-6.16-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower: split unitdir from libdir in Makefile
Older versions of `ld` don't seem to support preprocessor directives in
linker scripts, e.g. on RHEL9's ld-2.35.2-63.el9 the build fails with:
ld:./drivers/firmware/efi/libstub/zboot.lds:32: ignoring invalid character `#' in expression
ld:./drivers/firmware/efi/libstub/zboot.lds:33: syntax error
We don't seem to need these '#ifdef', no empty .sbat section is created
when CONFIG_EFI_SBAT_FILE="":
# objdump -h arch/arm64/boot/vmlinuz.efi
arch/arm64/boot/vmlinuz.efi: file format pei-aarch64-little
Sections:
Idx Name Size VMA LMA File off Algn
0 .text 00b94000 0000000000001000 0000000000001000 00001000 2**2
CONTENTS, ALLOC, LOAD, READONLY, CODE
1 .data 00000200 0000000000b95000 0000000000b95000 00b95000 2**2
CONTENTS, ALLOC, LOAD, DATA
Fixes: 0f9a1739dd ("efi: zboot specific mechanism for embedding SBAT section")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Set use_nsecs=true as timestamp is reported in ns. Lack of this result
in smaller timestamp error window which cause error during phc2sys
execution on E825 NICs:
phc2sys[1768.256]: ioctl PTP_SYS_OFFSET_PRECISE: Invalid argument
This problem was introduced in the cited commit which omitted setting
use_nsecs to true when converting the ice driver to use
convert_base_to_cs().
Testing hints (ethX is PF netdev):
phc2sys -s ethX -c CLOCK_REALTIME -O 37 -m
phc2sys[1769.256]: CLOCK_REALTIME phc offset -5 s0 freq -0 delay 0
Fixes: d4bea547eb ("ice/ptp: Remove convert_art_to_tsc()")
Signed-off-by: Anton Nadezhdin <anton.nadezhdin@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
If a reset event is received from the PF early in the init cycle, the
state machine hangs for about 25 seconds.
Reproducer:
echo 1 > /sys/class/net/$PF0/device/sriov_numvfs
ip link set dev $PF0 vf 0 mac $NEW_MAC
The log shows:
[792.620416] ice 0000:5e:00.0: Enabling 1 VFs
[792.738812] iavf 0000:5e:01.0: enabling device (0000 -> 0002)
[792.744182] ice 0000:5e:00.0: Enabling 1 VFs with 17 vectors and 16 queues per VF
[792.839964] ice 0000:5e:00.0: Setting MAC 52:54:00:00:00:11 on VF 0. VF driver will be reinitialized
[813.389684] iavf 0000:5e:01.0: Failed to communicate with PF; waiting before retry
[818.635918] iavf 0000:5e:01.0: Hardware came out of reset. Attempting reinit.
[818.766273] iavf 0000:5e:01.0: Multiqueue Enabled: Queue pair count = 16
Fix it by scheduling the reset task and making the reset task capable of
resetting early in the init cycle.
Fixes: ef8693eb90 ("i40evf: refactor reset handling")
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When a VFLR interrupt is received during a VF reset initiated from a
different source, the VFLR may be not fully handled. This can
leave the VF in an undefined state.
To address this, set the I40E_VFLR_EVENT_PENDING bit again during VFLR
handling if the reset is not yet complete. This ensures the driver
will properly complete the VF reset in such scenarios.
Fixes: 52424f974b ("i40e: Fix VF hang when reset is triggered on another VF")
Signed-off-by: Robert Malz <robert.malz@canonical.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The function i40e_vc_reset_vf attempts, up to 20 times, to handle a
VF reset request, using the return value of i40e_reset_vf as an indicator
of whether the reset was successfully triggered. Currently, i40e_reset_vf
always returns true, which causes new reset requests to be ignored if a
different VF reset is already in progress.
This patch updates the return value of i40e_reset_vf to reflect when
another VF reset is in progress, allowing the caller to properly use
the retry mechanism.
Fixes: 52424f974b ("i40e: Fix VF hang when reset is triggered on another VF")
Signed-off-by: Robert Malz <robert.malz@canonical.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When cross compiling the kernel with clang, we need to override
CLANG_CROSS_FLAGS when preparing the step libraries.
Prior to commit d1d0963121 ("tools: fix annoying "mkdir -p ..." logs
when building tools in parallel"), MAKEFLAGS would have been set to a
value that wouldn't set a value for CLANG_CROSS_FLAGS, hiding the
fact that we weren't properly overriding it.
Fixes: 56a2df7615 ("tools/resolve_btfids: Compile resolve_btfids as host program")
Signed-off-by: Suleiman Souhlal <suleiman@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20250606074538.1608546-1-suleiman@google.com
On many Qualcomm platforms the PMIC RTC control and time registers are
read-only so that the RTC time can not be updated. Instead an offset
needs be stored in some machine-specific non-volatile memory, which a
driver can take into account.
On platforms where the offset is stored in a Qualcomm specific UEFI
variable the variables are also accessed in a non-standard way, which
means that the OS cannot assume that the variable service is available
by the time the RTC driver probes.
Use the new 'qcom,uefi-rtc-info' property to indicate that the offset is
stored in a UEFI variable so that the OS can determine whether to wait
for it to become available.
Fixes: b53c2c23d3 ("arm64: dts: qcom: x1e80100: enable rtc")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250423075143.11157-5-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On many Qualcomm platforms the PMIC RTC control and time registers are
read-only so that the RTC time can not be updated. Instead an offset
needs be stored in some machine-specific non-volatile memory, which a
driver can take into account.
On platforms where the offset is stored in a Qualcomm specific UEFI
variable the variables are also accessed in a non-standard way, which
means that the OS cannot assume that the variable service is available
by the time the RTC driver probes.
Use the new 'qcom,uefi-rtc-info' property to indicate that the offset is
stored in a UEFI variable so that the OS can determine whether to wait
for it to become available.
Fixes: 409803681a ("arm64: dts: qcom: sc8280xp-x13s: switch to uefi rtc offset")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250423075143.11157-4-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In prepare_function_table() when the pinctrl function table IRQ entries
are generated, the pin bank is calculated from the absolute pin number;
however the IRQ bank mux array is indexed from the first pin bank of the
controller. For R_PIO controllers, this means the absolute pin bank is
way off from the relative pin bank used for array indexing.
Correct this by taking into account the pin base of the controller.
Fixes: f5e2cd34b1 ("pinctrl: sunxi: allow reading mux values from DT")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/20250607135203.2085226-1-wens@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Commit 1017560164 ("drm/meson: use unsigned long long / Hz for
frequency types") attempts to resolve video playback using 59.94Hz.
using YUV420 by changing the clock calculation to use
Hz instead of kHz (thus yielding more precision).
The basic calculation itself is correct, however the comparisions in
meson_vclk_vic_supported_freq() and meson_vclk_setup() don't work
anymore for 59.94Hz modes (using the freq * 1000 / 1001 logic). For
example, drm/edid specifies a 593407kHz clock for 3840x2160@59.94Hz.
With the mentioend commit we convert this to Hz. Then meson_vclk
tries to find a matchig "params" entry (as the clock setup code
currently only supports specific frequencies) by taking the venc_freq
from the params and calculating the "alt frequency" (used for the
59.94Hz modes) from it, which is:
(594000000Hz * 1000) / 1001 = 593406593Hz
Similar calculation is applied to the phy_freq (TMDS clock), which is 10
times the pixel clock.
Implement a new meson_vclk_freqs_are_matching_param() function whose
purpose is to compare if the requested and calculated frequencies. They
may not match exactly (for the reasons mentioned above). Allow the
clocks to deviate slightly to make the 59.94Hz modes again.
Fixes: 1017560164 ("drm/meson: use unsigned long long / Hz for frequency types")
Reported-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250609202751.962208-1-martin.blumenstingl@googlemail.com
On at least an ASRock 990FX Extreme 4 with a VIA VT6330, the devices
have not yet been enabled by the first time ata_acpi_cbl_80wire() is
called. This means that the ata_for_each_dev loop is never entered,
and a 40 wire cable is assumed.
The VIA controller on this board does not report the cable in the PCI
config space, thus having to fall back to ACPI even though no SATA
bridge is present.
The _GTM values are correctly reported by the firmware through ACPI,
which has already set up faster transfer modes, but due to the above
the controller is forced down to a maximum of UDMA/33.
Resolve this by modifying ata_acpi_cbl_80wire() to directly return the
cable type. First, an unknown cable is assumed which preserves the mode
set by the firmware, and then on subsequent calls when the devices have
been enabled, an 80 wire cable is correctly detected.
Since the function now directly returns the cable type, it is renamed
to ata_acpi_cbl_pata_type().
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://lore.kernel.org/r/20250519085945.1399466-1-tasos@tasossah.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
The controller has a hardware bug that can hard hang the system when
doing ATAPI DMAs without any trace of what happened. Depending on the
device attached, it can also prevent the system from booting.
In this case, the system hangs when reading the ATIP from optical media
with cdrecord -vvv -atip on an _NEC DVD_RW ND-4571A 1-01 and an
Optiarc DVD RW AD-7200A 1.06 attached to an ASRock 990FX Extreme 4,
running at UDMA/33.
The issue can be reproduced by running the same command with a cygwin
build of cdrecord on WinXP, although it requires more attempts to cause
it. The hang in that case is also resolved by forcing PIO. It doesn't
appear that VIA has produced any drivers for that OS, thus no known
workaround exists.
HDDs attached to the controller do not suffer from any DMA issues.
Cc: stable@vger.kernel.org
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/916677
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://lore.kernel.org/r/20250519085508.1398701-1-tasos@tasossah.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
The mailbox framework has a single inflight request at a time. If
a request is sent while another is still active, it will be queued
to the mailbox core ring buffer.
ACPM protocol did not serialize the calls to the mailbox subsystem so we
could start the timeout ticks in parallel for multiple requests, while
just one was being inflight.
Consider a hypothetical case where the xfer timeout is 100ms and an ACPM
transaction takes 90ms:
| 0ms: Message #0 is queued in mailbox layer and sent out, then sits
| at acpm_dequeue_by_polling() with a timeout of 100ms
| 1ms: Message #1 is queued in mailbox layer but not sent out yet.
| Since send_message() doesn't block, it also sits at
| acpm_dequeue_by_polling() with a timeout of 100ms
| ...
| 90ms: Message #0 is completed, txdone is called and message #1 is sent
| 101ms: Message #1 times out since the count started at 1ms. Even though
| it has only been inflight for 11ms.
Fix the problem by moving mbox_send_message() and mbox_client_txdone()
immediately after the message has been written to the TX queue and while
still keeping the ACPM TX queue lock. We thus tie together the TX write
with the doorbell ring and mark the TX as done after the doorbell has
been rung. This guarantees that the doorbell has been rang before
starting the timeout ticks. We should also see some performance
improvement as we no longer wait to receive a response before ringing
the doorbell for the next request, so the ACPM firmware shall be able to
drain faster the TX queue. Another benefit is that requests are no
longer able to ring the doorbell one for the other, so it eases
debugging. Finally, the mailbox software queue will always contain a
single doorbell request due to the serialization done at the ACPM TX
queue level. Protocols like ACPM, that handle their own hardware queues
need a passthrough mailbox API, where they are able to just ring the
doorbell or flip a bit directly into the mailbox controller. The mailbox
software queue mechanism, the locking done into the mailbox core is not
really needed, so hopefully this lays the foundation for a passthrough
mailbox API.
Reported-by: André Draszik <andre.draszik@linaro.org>
Fixes: a88927b534 ("firmware: add Exynos ACPM protocol driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20250606-acpm-timeout-v2-1-306b1aa07a6c@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The dell_rbu driver will use memset() to clear the data held by each
packet when it is no longer needed (when the driver is unloaded, the
packet size is changed, etc).
The amount of memory that is cleared (before this patch) is the normal
packet size. However, the last packet in the list may be smaller.
Fix this to only clear the memory actually used by each packet, to prevent
it from writing past the end of data buffer.
Because the packet data buffers are allocated with __get_free_pages() (in
page-sized increments), this bug could only result in a buffer being
overwritten when a packet size larger than one page is used. The only user
of the dell_rbu module should be the Dell BIOS update program, which uses
a packet size of 4096, so no issues should be seen without the patch, it
just blocks the possiblity.
Fixes: 6c54c28e69 ("[PATCH] dell_rbu: new Dell BIOS update driver")
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Link: https://lore.kernel.org/r/20250609184659.7210-5-stuart.w.hayes@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Pull powerpc fixes from Madhavan Srinivasan:
- a couple of fixes for out of bounds issues in memtrace and vas
Thanks to Ritesh Harjani (IBM), Haren Myneni, and Jonathan Greental
* tag 'powerpc-6.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/vas: Return -EINVAL if the offset is non-zero in mmap()
powerpc/powernv/memtrace: Fix out of bounds issue in memtrace mmap
When a host is configured with a few LUNs and I/O is running, injecting
FC faults repeatedly leads to path recovery problems. The LUNs have 4
paths each and 3 of them come back active after say an FC fault which
makes 2 of the paths go down, instead of all 4. This happens after
several iterations of continuous FC faults.
Reason here is that we're returning an I/O error whenever we're
encountering sense code 06/04/0a (LOGICAL UNIT NOT ACCESSIBLE, ASYMMETRIC
ACCESS STATE TRANSITION) instead of retrying.
Signed-off-by: Rajashekhar M A <rajs@netapp.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20250606135924.27397-1-hare@kernel.org
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently storvsc_timeout is only used in storvsc_sdev_configure(), and
5s and 10s are used elsewhere. It turns out that rarely the 5s is not
enough on Azure, so let's use storvsc_timeout everywhere.
In case a timeout happens and storvsc_channel_init() returns an error,
close the VMBus channel so that any host-to-guest messages in the
channel's ringbuffer, which might come late, can be safely ignored.
Add a "const" to storvsc_timeout.
Cc: stable@kernel.org
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/1749243459-10419-1-git-send-email-decui@microsoft.com
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If we have a newer dtb than kernel, we could end up in a situation where
the GPU device is present in the dtb, but not in the drivers device
table. We don't want this to prevent the display from probing. So
check that we recognize the GPU before adding the GPU component.
v2: use %pOF
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/657701/
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- MGMT: Fix UAF on mgmt_remove_adv_monitor_complete
- MGMT: Protect mgmt_pending list with its own lock
- hci_core: fix list_for_each_entry_rcu usage
- btintel_pcie: Increase the tx and rx descriptor count
- btintel_pcie: Reduce driver buffer posting to prevent race condition
- btintel_pcie: Fix driver not posting maximum rx buffers
* tag 'for-net-2025-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: MGMT: Protect mgmt_pending list with its own lock
Bluetooth: MGMT: Fix UAF on mgmt_remove_adv_monitor_complete
Bluetooth: btintel_pcie: Reduce driver buffer posting to prevent race condition
Bluetooth: btintel_pcie: Increase the tx and rx descriptor count
Bluetooth: btintel_pcie: Fix driver not posting maximum rx buffers
Bluetooth: hci_core: fix list_for_each_entry_rcu usage
====================
Link: https://patch.msgid.link/20250605191136.904411-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SFQ has an assumption of always being able to queue at least one packet.
However, after the blamed commit, sch->q.len can be inflated by packets
in sch->gso_skb, and an enqueue() on an empty SFQ qdisc can be followed
by an immediate drop.
Fix sfq_drop() to properly clear q->tail in this situation.
Tested:
ip netns add lb
ip link add dev to-lb type veth peer name in-lb netns lb
ethtool -K to-lb tso off # force qdisc to requeue gso_skb
ip netns exec lb ethtool -K in-lb gro on # enable NAPI
ip link set dev to-lb up
ip -netns lb link set dev in-lb up
ip addr add dev to-lb 192.168.20.1/24
ip -netns lb addr add dev in-lb 192.168.20.2/24
tc qdisc replace dev to-lb root sfq limit 100
ip netns exec lb netserver
netperf -H 192.168.20.2 -l 100 &
netperf -H 192.168.20.2 -l 100 &
netperf -H 192.168.20.2 -l 100 &
netperf -H 192.168.20.2 -l 100 &
Fixes: a53851e2c3 ("net: sched: explicit locking in gso_cpu fallback")
Reported-by: Marcus Wichelmann <marcus.wichelmann@hetzner-cloud.de>
Closes: https://lore.kernel.org/netdev/9da42688-bfaa-4364-8797-e9271f3bdaef@hetzner-cloud.de/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20250606165127.3629486-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is reported that on Acer Nitro V15 suspend only works properly if the
keyboard backlight is turned off. In looking through the issue Acer Nitro
V15 has a GPIO (#8) specified in _AEI but it has no matching notify device
in _EVT. The values for GPIO #8 change as keyboard backlight is turned on
and off.
This makes it seem that GPIO #8 is actually supposed to be solely for
keyboard backlight. Turning off the interrupt for this GPIO fixes the issue.
Add a quirk that does just that.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4169
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Mika Westerberg <westeri@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Linus Torvalds