f96c48670319d685d18d50819ed0c1ef751ed2ac
1197460 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Suren Baghdasaryan
|
f96c486703 |
mm: disable CONFIG_PER_VMA_LOCK until its fixed
A memory corruption was reported in [1] with bisection pointing to the
patch [2] enabling per-VMA locks for x86. Disable per-VMA locks config to
prevent this issue until the fix is confirmed. This is expected to be a
temporary measure.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=217624
[2] https://lore.kernel.org/all/20230227173632.3292573-30-surenb@google.com
Link: https://lkml.kernel.org/r/20230706011400.2949242-3-surenb@google.com
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Closes: https://lore.kernel.org/all/dbdef34c-3a07-5951-e1ae-e9c6e3cdf51b@kernel.org/
Reported-by: Jacob Young <jacobly.alt@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217624
Fixes:
|
||
|
Suren Baghdasaryan
|
2b4f3b4987 |
fork: lock VMAs of the parent process when forking
Patch series "Avoid memory corruption caused by per-VMA locks", v4.
A memory corruption was reported in [1] with bisection pointing to the
patch [2] enabling per-VMA locks for x86. Based on the reproducer
provided in [1] we suspect this is caused by the lack of VMA locking while
forking a child process.
Patch 1/2 in the series implements proper VMA locking during fork. I
tested the fix locally using the reproducer and was unable to reproduce
the memory corruption problem.
This fix can potentially regress some fork-heavy workloads. Kernel build
time did not show noticeable regression on a 56-core machine while a
stress test mapping 10000 VMAs and forking 5000 times in a tight loop
shows ~7% regression. If such fork time regression is unacceptable,
disabling CONFIG_PER_VMA_LOCK should restore its performance. Further
optimizations are possible if this regression proves to be problematic.
Patch 2/2 disables per-VMA locks until the fix is tested and verified.
This patch (of 2):
When forking a child process, parent write-protects an anonymous page and
COW-shares it with the child being forked using copy_present_pte().
Parent's TLB is flushed right before we drop the parent's mmap_lock in
dup_mmap(). If we get a write-fault before that TLB flush in the parent,
and we end up replacing that anonymous page in the parent process in
do_wp_page() (because, COW-shared with the child), this might lead to some
stale writable TLB entries targeting the wrong (old) page. Similar issue
happened in the past with userfaultfd (see flush_tlb_page() call inside
do_wp_page()).
Lock VMAs of the parent process when forking a child, which prevents
concurrent page faults during fork operation and avoids this issue. This
fix can potentially regress some fork-heavy workloads. Kernel build time
did not show noticeable regression on a 56-core machine while a stress
test mapping 10000 VMAs and forking 5000 times in a tight loop shows ~7%
regression. If such fork time regression is unacceptable, disabling
CONFIG_PER_VMA_LOCK should restore its performance. Further optimizations
are possible if this regression proves to be problematic.
Link: https://lkml.kernel.org/r/20230706011400.2949242-1-surenb@google.com
Link: https://lkml.kernel.org/r/20230706011400.2949242-2-surenb@google.com
Fixes:
|
||
|
Andrew Morton
|
3fbff91afb | Merge branch 'master' into mm-hotfixes-stable | ||
|
Linus Torvalds
|
a901a3568f |
Merge tag 'iomap-6.5-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap updates from Darrick Wong: - Fix a type signature mismatch - Drop Christoph as maintainer * tag 'iomap-6.5-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: iomap: drop me [hch] from MAINTAINERS for iomap fs: iomap: Change the type of blocksize from 'int' to 'unsigned int' in iomap_file_buffered_write_punch_delalloc |
||
|
Linus Torvalds
|
28c7980fa1 |
Merge tag 'v6.5/vfs.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fix from Christian Brauner: "A fix for the backing file work from this cycle. When init_file() failed it would call file_free_rcu() on the file allocated by the caller of init_file(). It naively assumed that the correct cleanup operation would be called depending on whether it is a regular file or a backing file. However, that presupposes that the FMODE_BACKING flag would already be set which it won't be as that is done in the caller of init_file(). Fix that bug by moving the cleanup of the allocated file into the caller where it belongs in the first place. There's no good reason for init_file() to consume resources it didn't allocate. This is a mainline only fix and was reported by syzbot. The fix was validated by syzbot against the provided reproducer" * tag 'v6.5/vfs.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: fs: move cleanup from init_file() into its callers |
||
|
Linus Torvalds
|
5def00ca25 |
Merge tag 'i2c-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang: - I2C has now a co-maintainer taking care of the host drivers. Welcome Andi Shyti and have fun! - platform remove callback converted to return void in drivers - simplify drivers by using devm_clk_get_enabled() - introduce i2c_get_match_data() to avoid more boilerplate code (especially since the core stopped delivering an i2c_device_id) - and the usual bunch of driver updates * tag 'i2c-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits) i2c: uniphier: Use devm_clk_get_enabled() i2c: uniphier-f: Use devm_clk_get_enabled() i2c: owl: Use devm_clk_get_enabled() i2c: lpc2k: Use devm_clk_get_enabled() i2c: hix5hd2: Use devm_clk_get_enabled() i2c: sun6i-p2wi: Use devm_clk_get_enabled() i2c: pasemi-platform: Use devm_clk_get_enabled() i2c: mt7621: Use devm_clk_get_enabled() i2c: xiic: Use devm_clk_get_enabled() i2c: davinci: Use platform table macro over module_alias i2c: ocores: use devm_ managed clks i2c: nomadik: Use dev_err_probe() whenever possible i2c: nomadik: Use devm_clk_get_enabled() i2c: nomadik: Remove unnecessary goto label usb: typec: ucsi: Mark dGPUs as DEVICE scope i2c: wmt: Use devm_platform_get_and_ioremap_resource() i2c: versatile: Use devm_platform_get_and_ioremap_resource() i2c: hix5hd2: Add I2C_M_STOP flag support for i2c-hix5hd2 driver. i2c: mpc: Use of_property_read_reg() to parse "reg" i2c: imx-lpi2c: Don't open-code DIV_ROUND_UP ... |
||
|
Linus Torvalds
|
ed77ac92a1 |
Merge tag 'parisc-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller: - Add missing cacheflush() syscall - Fix STI console on 64-bit-only machines - Move kernel debug options to Kconfig.debug - Lots of warning fixes in arch/parisc/ and drivers/parisc/ when compiled with W=1 - Enable some more graphics drivers in refreshed defconfigs * tag 'parisc-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: (29 commits) parisc: Refresh defconfigs parisc: irq: Add irq-related function declarations parisc: Move init function declarations into header file parisc: dino: Make dino_init() returning void parisc: lba_pci: Mark two variables __maybe_unused parisc: unaligned: Include header file to avoid missing prototype warnings parisc: signal: Mark do_notify_resume() and sys_rt_sigreturn() asmlinkage parisc: unwind: Mark start and stop variables __maybe_unused parisc: init: Drop unused variable end_paddr parisc: traps: Mark functions static parisc: processor: Fix kdoc for init_cpu_profiler() parisc: sys_parisc: parisc_personality() is called from asm code parisc: ccio-dma: Fix kdoc and compiler warnings parisc: pdc_stable: Fix kdoc and compiler warnings parisc: pci-dma: Make pcxl_alloc_range() static parisc: Mark image_size __maybe_unused in perf_write() parisc: module: Mark symindex __maybe_unused parisc: pdc_chassis: Fix kdoc warnings parisc: firmware: Fix kdoc warnings parisc: drivers: Fix kdoc warnings ... |
||
|
Amir Goldstein
|
dff745c122 |
fs: move cleanup from init_file() into its callers
The use of file_free_rcu() in init_file() to free the struct that was
allocated by the caller was hacky and we got what we deserved.
Let init_file() and its callers take care of cleaning up each after
their own allocated resources on error.
Fixes:
|
||
|
Linus Torvalds
|
995b406c7e |
Merge tag 'csky-for-linus-6.5' of https://github.com/c-sky/csky-linux
Pull arch/csky update from Guo Ren: - Correct thread.trap_no restore of uprobe * tag 'csky-for-linus-6.5' of https://github.com/c-sky/csky-linux: csky: uprobes: Restore thread.trap_no |
||
|
Linus Torvalds
|
dfab92f27c |
Merge tag 'nfs-for-6.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Stable fixes and other bugfixes:
- nfs: don't report STATX_BTIME in ->getattr
- Revert 'NFSv4: Retry LOCK on OLD_STATEID during delegation return'
since it breaks NFSv4 state recovery.
- NFSv4.1: freeze the session table upon receiving NFS4ERR_BADSESSION
- Fix the NFSv4.2 xattr cache shrinker_id
- Force a ctime update after a NFSv4.2 SETXATTR call
Features and cleanups:
- NFS and RPC over TLS client code from Chuck Lever
- Support for use of abstract unix socket addresses with the rpcbind
daemon
- Sysfs API to allow shutdown of the kernel RPC client and prevent
umount() hangs if the server is known to be permanently down
- XDR cleanups from Anna"
* tag 'nfs-for-6.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (33 commits)
Revert "NFSv4: Retry LOCK on OLD_STATEID during delegation return"
NFS: Don't cleanup sysfs superblock entry if uninitialized
nfs: don't report STATX_BTIME in ->getattr
NFSv4.1: freeze the session table upon receiving NFS4ERR_BADSESSION
NFSv4.2: fix wrong shrinker_id
NFSv4: Clean up some shutdown loops
NFS: Cancel all existing RPC tasks when shutdown
NFS: add sysfs shutdown knob
NFS: add a sysfs link to the acl rpc_client
NFS: add a sysfs link to the lockd rpc_client
NFS: Add sysfs links to sunrpc clients for nfs_clients
NFS: add superblock sysfs entries
NFS: Make all of /sys/fs/nfs network-namespace unique
NFS: Open-code the nfs_kset kset_create_and_add()
NFS: rename nfs_client_kobj to nfs_net_kobj
NFS: rename nfs_client_kset to nfs_kset
NFS: Add an "xprtsec=" NFS mount option
NFS: Have struct nfs_client carry a TLS policy field
SUNRPC: Add a TCP-with-TLS RPC transport class
SUNRPC: Capture CMSG metadata on client-side receive
...
|
||
|
Linus Torvalds
|
f8566aa4f1 |
Merge tag 'x86-urgent-2023-07-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner: "A single regression fix for x86: Moving the invocation of arch_cpu_finalize_init() earlier in the boot process caused a boot regression on IBT enabled system. The root cause is not the move of arch_cpu_finalize_init() itself. The system fails to boot because the subsequent efi_enter_virtual_mode() code has a non-IBT safe EFI call inside. This was not noticed before because IBT was enabled after the EFI initialization. Switching the EFI call to use the IBT safe wrapper cures the problem" * tag 'x86-urgent-2023-07-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Make efi_set_virtual_address_map IBT safe |
||
|
Linus Torvalds
|
ad2885979e |
Merge tag 'kbuild-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove the deprecated rule to build *.dtbo from *.dts
- Refactor section mismatch detection in modpost
- Fix bogus ARM section mismatch detections
- Fix error of 'make gtags' with O= option
- Add Clang's target triple to KBUILD_CPPFLAGS to fix a build error
with the latest LLVM version
- Rebuild the built-in initrd when KBUILD_BUILD_TIMESTAMP is changed
- Ignore more compiler-generated symbols for kallsyms
- Fix 'make local*config' to handle the ${CONFIG_FOO} form in Makefiles
- Enable more kernel-doc warnings with W=2
- Refactor <linux/export.h> by generating KSYMTAB data by modpost
- Deprecate <asm/export.h> and <asm-generic/export.h>
- Remove the EXPORT_DATA_SYMBOL macro
- Move the check for static EXPORT_SYMBOL back to modpost, which makes
the build faster
- Re-implement CONFIG_TRIM_UNUSED_KSYMS with one-pass algorithm
- Warn missing MODULE_DESCRIPTION when building modules with W=1
- Make 'make clean' robust against too long argument error
- Exclude more objects from GCOV to fix CFI failures with GCOV
- Allow 'make modules_install' to install modules.builtin and
modules.builtin.modinfo even when CONFIG_MODULES is disabled
- Include modules.builtin and modules.builtin.modinfo in the
linux-image Debian package even when CONFIG_MODULES is disabled
- Revive "Entering directory" logging for the latest Make version
* tag 'kbuild-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (72 commits)
modpost: define more R_ARM_* for old distributions
kbuild: revive "Entering directory" for Make >= 4.4.1
kbuild: set correct abs_srctree and abs_objtree for package builds
scripts/mksysmap: Ignore prefixed KCFI symbols
kbuild: deb-pkg: remove the CONFIG_MODULES check in buildeb
kbuild: builddeb: always make modules_install, to install modules.builtin*
modpost: continue even with unknown relocation type
modpost: factor out Elf_Sym pointer calculation to section_rel()
modpost: factor out inst location calculation to section_rel()
kbuild: Disable GCOV for *.mod.o
kbuild: Fix CFI failures with GCOV
kbuild: make clean rule robust against too long argument error
script: modpost: emit a warning when the description is missing
kbuild: make modules_install copy modules.builtin(.modinfo)
linux/export.h: rename 'sec' argument to 'license'
modpost: show offset from symbol for section mismatch warnings
modpost: merge two similar section mismatch warnings
kbuild: implement CONFIG_TRIM_UNUSED_KSYMS without recursion
modpost: use null string instead of NULL pointer for default namespace
modpost: squash sym_update_namespace() into sym_add_exported()
...
|
||
|
Linus Torvalds
|
e3c2b10d6f |
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas: "Fix memory corruption (overwriting the kmalloc redzone) when saving the SVE state while in SVE streaming mode" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: sme: Use STR P to clear FFR context field in streaming SVE mode |
||
|
Linus Torvalds
|
d25f002575 |
Merge tag 'cxl-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dan Williams:
"The highlights in terms of new functionality are support for the
standard CXL Performance Monitor definition that appeared in CXL 3.0,
support for device sanitization (wiping all data from a device),
secure-erase (re-keying encryption of user data), and support for
firmware update. The firmware update support is notable as it reuses
the simple sysfs_upload interface to just cat(1) a blob to a sysfs
file and pipe that to the device.
Additionally there are a substantial number of cleanups and
reorganizations to get ready for RCH error handling (RCH == Restricted
CXL Host == current shipping hardware generation / pre CXL-2.0
topologies) and type-2 (accelerator / vendor specific) devices.
For vendor specific devices they implement a subset of what the
generic type-3 (generic memory expander) driver expects. As a result
the rework decouples optional infrastructure from the core driver
context.
For RCH topologies, where the specification working group did not want
to confuse pre-CXL-aware operating systems, many of the standard
registers are hidden which makes support standard bus features like
AER (PCIe Advanced Error Reporting) difficult. The rework arranges for
the driver to help the PCI-AER core. Bjorn is on board with this
direction but a late regression disocvery means the completion of this
functionality needs to cook a bit longer, so it is code
reorganizations only for now.
Summary:
- Add infrastructure for supporting background commands along with
support for device sanitization and firmware update
- Introduce a CXL performance monitoring unit driver based on the
common definition in the specification.
- Land some preparatory cleanup and refactoring for the anticipated
arrival of CXL type-2 (accelerator devices) and CXL RCH (CXL-v1.1
topology) error handling.
- Rework CPU cache management with respect to region configuration
(device hotplug or other dynamic changes to memory interleaving)
- Fix region reconfiguration vs CXL decoder ordering rules"
* tag 'cxl-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (51 commits)
cxl: Fix one kernel-doc comment
cxl/pci: Use correct flag for sanitize polling
docs: perf: Minimal introduction the the CXL PMU device and driver
perf: CXL Performance Monitoring Unit driver
tools/testing/cxl: add firmware update emulation to CXL memdevs
tools/testing/cxl: Use named effects for the Command Effect Log
tools/testing/cxl: Fix command effects for inject/clear poison
cxl: add a firmware update mechanism using the sysfs firmware loader
cxl/test: Add Secure Erase opcode support
cxl/mem: Support Secure Erase
cxl/test: Add Sanitize opcode support
cxl/mem: Wire up Sanitization support
cxl/mbox: Add sanitization handling machinery
cxl/mem: Introduce security state sysfs file
cxl/mbox: Allow for IRQ_NONE case in the isr
Revert "cxl/port: Enable the HDM decoder capability for switch ports"
cxl/memdev: Formalize endpoint port linkage
cxl/pci: Unconditionally unmask 256B Flit errors
cxl/region: Manage decoder target_type at decoder-attach time
cxl/hdm: Default CXL_DEVTYPE_DEVMEM decoders to CXL_DECODER_DEVMEM
...
|
||
|
Linus Torvalds
|
0a1c979c6b |
Merge tag 'libnvdimm-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull nvdimm and DAX updates from Vishal Verma:
"This is mostly small cleanups and fixes, with the biggest change being
the change to the DAX fault handler allowing it to return
VM_FAULT_HWPOISON.
Summary:
- DAX fixes and cleanups including a use after free, extra
references, and device unregistration, and a redundant variable.
- Allow the DAX fault handler to return VM_FAULT_HWPOISON
- A few libnvdimm cleanups such as making some functions and
variables static where sufficient.
- Add a few missing prototypes for wrapped functions in
tools/testing/nvdimm"
* tag 'libnvdimm-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: enable dax fault handler to report VM_FAULT_HWPOISON
nvdimm: make security_show static
nvdimm: make nd_class variable static
dax/kmem: Pass valid argument to memory_group_register_static
fsdax: remove redundant variable 'error'
dax: Cleanup extra dax_region references
dax: Introduce alloc_dev_dax_id()
dax: Use device_unregister() in unregister_dax_mapping()
dax: Fix dax_mapping_release() use after free
tools/testing/nvdimm: Drop empty platform remove function
libnvdimm: mark 'security_show' static again
testing: nvdimm: add missing prototypes for wrapped functions
dax: fix missing-prototype warnings
|
||
|
Linus Torvalds
|
be21a73edd |
Merge tag 'sysctl-fixes-v2-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull another sysctl fix from Luis Chamberlain: "Just one minor nit I forgot to merge" * tag 'sysctl-fixes-v2-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: sysctl: set variable sysctl_mount_point storage-class-specifier to static |
||
|
Linus Torvalds
|
170ab6c51a |
Merge tag 'flex-array-transformations-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull flexible-array update from Gustavo Silva: "Transform a zero-length array into a C99 flexible-array member. This addresses a build failure with Clang by fixing multiple '-Warray-bounds' warnings in drivers/staging/ks7010/ks_wlan_net.c" * tag 'flex-array-transformations-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: uapi: wireless: Replace zero-length array with flexible-array member |
||
|
Christian Brauner
|
dd546618ba |
pid: use struct_size_t() helper
Before commit |
||
|
Liam R. Howlett
|
408579cd62 |
mm: Update do_vmi_align_munmap() return semantics
Since do_vmi_align_munmap() will always honor the downgrade request on the success, the callers no longer have to deal with confusing return codes. Since all callers that request downgrade actually want the lock to be dropped, change the downgrade to an unlock request. Note that the lock still needs to be held in read mode during the page table clean up to avoid races with a map request. Update do_vmi_align_munmap() to return 0 for success. Clean up the callers and comments to always expect the unlock to be honored on the success path. The error path will always leave the lock untouched. As part of the cleanup, the wrapper function do_vmi_munmap() and callers to the wrapper are also updated. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/linux-mm/20230629191414.1215929-1-willy@infradead.org/ Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Matthew Wilcox (Oracle)
|
e4bd84c069 |
mm: Always downgrade mmap_lock if requested
Now that stack growth must always hold the mmap_lock for write, we can always downgrade the mmap_lock to read and safely unmap pages from the page table, even if we're next to a stack. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Max Filippov
|
03f889378f |
xtensa: fix lock_mm_and_find_vma in case VMA not found
MMU version of lock_mm_and_find_vma releases the mm lock before
returning when VMA is not found. Do the same in noMMU version.
This fixes hang on an attempt to handle protection fault.
Fixes:
|
||
|
Linus Torvalds
|
a507db1d8f |
Merge tag '6.5-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client updates from Steve French: - Deferred close fix - Debugging improvements: display missing mount option, dump rc on invalidate inode failures, print client_guid in DebugData, log session id when matching session not found in reconnect, new dynamic tracepoint for session not found - Mount fixes including: potential null dereference, and possible memory leak and path name parsing when double slashes - Fix potential use after free in compounding - Two crediting (flow control) fixes: fix for crediting leak (stress scenario with excess lease credits) and better locking around updating credits - Three cleanups from issues pointed out by the kernel test robot - Session state check improvements (including for potential use after free) - DFS fixes: Fix for getattr on link when DFS disabled, fix for DFS mounts to same share with different prefix paths, DFS mount error checking improvement * tag '6.5-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6: cifs: new dynamic tracepoint to track ses not found errors cifs: log session id when a matching ses is not found smb: client: improve DFS mount check smb: client: fix shared DFS root mounts with different prefixes smb: client: fix parsing of source mount option smb: client: fix broken file attrs with nodfs mounts cifs: print client_guid in DebugData cifs: fix session state check in smb2_find_smb_ses cifs: fix session state check in reconnect to avoid use-after-free issue cifs: do all necessary checks for credits within or before locking cifs: prevent use-after-free by freeing the cfile later smb: client: fix warning in generic_ip_connect() smb: client: fix warning in CIFSFindNext() smb: client: fix warning in CIFSFindFirst() smb3: do not reserve too many oplock credits cifs: print more detail when invalidate_inode_mapping fails smb: client: fix warning in cifs_smb3_do_mount() smb: client: fix warning in cifs_match_super() cifs: print nosharesock value while dumping mount options SMB3: Do not send lease break acknowledgment if all file handles have been closed |
||
|
Linus Torvalds
|
8976e9d003 |
Merge tag '6.5-rc-ksmbd-server-fixes-part1' of git://git.samba.org/ksmbd
Pull ksmbd server updates from Steve French: - two fixes for compounding bugs (make sure no out of bound reads with less common combinations of commands in the compound) - eight minor cleanup patches (e.g. simplifying return values, replace one element array, use of kzalloc where simpler) - fix for clang warning on possible overflow in filename conversion * tag '6.5-rc-ksmbd-server-fixes-part1' of git://git.samba.org/ksmbd: ksmbd: avoid field overflow warning ksmbd: Replace one-element array with flexible-array member ksmbd: Use struct_size() helper in ksmbd_negotiate_smb_dialect() ksmbd: add missing compound request handing in some commands ksmbd: fix out of bounds read in smb2_sess_setup ksmbd: Replace the ternary conditional operator with min() ksmbd: use kvzalloc instead of kvmalloc ksmbd: Change the return value of ksmbd_vfs_query_maximal_access to void ksmbd: return a literal instead of 'err' in ksmbd_vfs_kern_path_locked() ksmbd: use kzalloc() instead of __GFP_ZERO ksmbd: remove unused ksmbd_tree_conn_share function |
||
|
Linus Torvalds
|
ee152be17a |
Merge tag 'nfsd-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever: - Fix ordering of attributes in NFSv4 GETATTR replies * tag 'nfsd-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: nfsd: Fix creation time serialization order |
||
|
Linus Torvalds
|
f4ce392b03 |
Merge tag 'livepatching-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching update from Petr Mladek: - Make a variable static to fix a sparse warning * tag 'livepatching-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: livepatch: Make 'klp_stack_entries' static |
||
|
Linus Torvalds
|
937d96d2d5 |
Merge tag 'efi-next-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"Although some more stuff is brewing, the EFI changes that are ready
for mainline are few this cycle:
- improve the PCI DMA paranoia logic in the EFI stub
- some constification changes
- add statfs support to efivarfs
- allow user space to enumerate updatable firmware resources without
CAP_SYS_ADMIN"
* tag 'efi-next-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/libstub: Disable PCI DMA before grabbing the EFI memory map
efi/esrt: Allow ESRT access without CAP_SYS_ADMIN
efivarfs: expose used and total size
efi: make kobj_type structure constant
efi: x86: make kobj_type structure constant
|
||
|
Linus Torvalds
|
5d95ff84e6 |
Merge tag 'v6.5-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu: "API: - Add linear akcipher/sig API - Add tfm cloning (hmac, cmac) - Add statesize to crypto_ahash Algorithms: - Allow only odd e and restrict value in FIPS mode for RSA - Replace LFSR with SHA3-256 in jitter - Add interface for gathering of raw entropy in jitter Drivers: - Fix race on data_avail and actual data in hwrng/virtio - Add hash and HMAC support in starfive - Add RSA algo support in starfive - Add support for PCI device 0x156E in ccp" * tag 'v6.5-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (85 commits) crypto: akcipher - Do not copy dst if it is NULL crypto: sig - Fix verify call crypto: akcipher - Set request tfm on sync path crypto: sm2 - Provide sm2_compute_z_digest when sm2 is disabled hwrng: imx-rngc - switch to DEFINE_SIMPLE_DEV_PM_OPS hwrng: st - keep clock enabled while hwrng is registered hwrng: st - support compile-testing hwrng: imx-rngc - fix the timeout for init and self check KEYS: asymmetric: Use new crypto interface without scatterlists KEYS: asymmetric: Move sm2 code into x509_public_key KEYS: Add forward declaration in asymmetric-parser.h crypto: sig - Add interface for sign/verify crypto: akcipher - Add sync interface without SG lists crypto: cipher - On clone do crypto_mod_get() crypto: api - Add __crypto_alloc_tfmgfp crypto: api - Remove crypto_init_ops() crypto: rsa - allow only odd e and restrict value in FIPS mode crypto: geniv - Split geniv out of AEAD Kconfig option crypto: algboss - Add missing dependency on RNG2 crypto: starfive - Add RSA algo support ... |
||
|
Linus Torvalds
|
d85a143b69 |
xtensa: fix NOMMU build with lock_mm_and_find_vma() conversion
It turns out that xtensa has a really odd configuration situation: you
can do a no-MMU config, but still have the page fault code enabled.
Which doesn't sound all that sensible, but it turns out that xtensa can
have protection faults even without the MMU, and we have this:
config PFAULT
bool "Handle protection faults" if EXPERT && !MMU
default y
help
Handle protection faults. MMU configurations must enable it.
noMMU configurations may disable it if used memory map never
generates protection faults or faults are always fatal.
If unsure, say Y.
which completely violated my expectations of the page fault handling.
End result: Guenter reports that the xtensa no-MMU builds all fail with
arch/xtensa/mm/fault.c: In function ‘do_page_fault’:
arch/xtensa/mm/fault.c:133:8: error: implicit declaration of function ‘lock_mm_and_find_vma’
because I never exposed the new lock_mm_and_find_vma() function for the
no-MMU case.
Doing so is simple enough, and fixes the problem.
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Fixes:
|
||
|
Tom Rix
|
7fffbc7107 |
sysctl: set variable sysctl_mount_point storage-class-specifier to static
smatch reports fs/proc/proc_sysctl.c:32:18: warning: symbol 'sysctl_mount_point' was not declared. Should it be static? This variable is only used in its defining file, so it should be static. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
|
Linus Torvalds
|
b25f62ccb4 |
Merge tag 'vfio-v6.5-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson: - Adjust log levels for common messages (Oleksandr Natalenko, Alex Williamson) - Support for dynamic MSI-X allocation (Reinette Chatre) - Enable and report PCIe AtomicOp Completer capabilities (Alex Williamson) - Cleanup Kconfigs for vfio bus drivers (Alex Williamson) - Add support for CDX bus based devices (Nipun Gupta) - Fix race with concurrent mdev initialization (Eric Farman) * tag 'vfio-v6.5-rc1' of https://github.com/awilliam/linux-vfio: vfio/mdev: Move the compat_class initialization to module init vfio/cdx: add support for CDX bus vfio/fsl: Create Kconfig sub-menu vfio/platform: Cleanup Kconfig vfio/pci: Cleanup Kconfig vfio/pci-core: Add capability for AtomicOp completer support vfio/pci: Also demote hiding standard cap messages vfio/pci: Clear VFIO_IRQ_INFO_NORESIZE for MSI-X vfio/pci: Support dynamic MSI-X vfio/pci: Probe and store ability to support dynamic MSI-X vfio/pci: Use bitfield for struct vfio_pci_core_device flags vfio/pci: Update stale comment vfio/pci: Remove interrupt context counter vfio/pci: Use xarray for interrupt context storage vfio/pci: Move to single error path vfio/pci: Prepare for dynamic interrupt context storage vfio/pci: Remove negative check on unsigned vector vfio/pci: Consolidate irq cleanup on MSI/MSI-X disable vfio/pci: demote hiding ecap messages to debug level |
||
|
Linus Torvalds
|
9070577ae9 |
Merge tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Export pcie_retrain_link() for use outside ASPM
- Add Data Link Layer Link Active Reporting as another way for
pcie_retrain_link() to determine the link is up
- Work around link training failures (especially on the ASMedia
ASM2824 switch) by training first at 2.5GT/s and then attempting
higher rates
Resource management:
- When we coalesce host bridge windows, remove invalidated resources
from the resource tree so future allocations work correctly
Hotplug:
- Cancel bringup sequence if card is not present, to keep from
blinking Power Indicator indefinitely
- Reassign bridge resources if necessary for ACPI hotplug
Driver binding:
- Convert platform_device .remove() callbacks to return void instead
of a mostly useless int
Power management:
- Reduce wait time for secondary bus to be ready to speed up resume
- Avoid putting EloPOS E2/S2/H2 (as well as Elo i2) PCIe Ports in
D3cold
- Call _REG when transitioning D-states so AML that uses the PCI
config space OpRegion works, which fixes some ASMedia GPIO
controllers after resume
Virtualization:
- Delay extra 250ms after FLR of Solidigm P44 Pro NVMe to avoid KVM
hang when guest is rebooted
- Add function 1 DMA alias quirk for Marvell 88SE9235
Error handling:
- Unexport pci_save_aer_state() since it's only used in drivers/pci/
- Drop recommendation for drivers to configure AER Capability, since
the PCI core does this for all devices
ASPM:
- Disable ASPM on MFD function removal to avoid use-after-free
- Tighten up pci_enable_link_state() and pci_disable_link_state()
interfaces so they don't enable/disable states the driver didn't
specify
- Avoid link retraining race that can happen if ASPM sets link
control parameters while the link is in the midst of training for
some other reason
Endpoint framework:
- Change "PCI Endpoint Virtual NTB driver" Kconfig prompt to be
different from "PCI Endpoint NTB driver"
- Automatically create a function specific attributes group for
endpoint drivers to avoid reference counting issues
- Fix many EPC test issues
- Return pci_epf_type_add_cfs() error if EPF has no driver
- Add kernel-doc for pci_epc_raise_irq() and pci_epc_map_msi_irq()
MSI vector parameters
- Pass EPF device ID to driver probe functions
- Return -EALREADY if EPC has already been started/stopped
- Add linkdown notifier support and use it in qcom-ep
- Add Bus Master Enable event support and use it in qcom-ep
- Add Qualcomm Modem Host Interface (MHI) endpoint driver
- Add Layerscape PME interrupt handling to manage link-up
notification
Cadence PCIe controller driver:
- Wait for link retrain to complete when working around the J721E
i2085 erratum with Gen2 mode
Faraday FTPC100 PCI controller driver:
- Release clock resources on error paths
Freescale i.MX6 PCIe controller driver:
- Save and restore Root Port MSI control to work around hardware defect
Intel VMD host bridge driver:
- Reset VMD config register between soft reboots
- Capture pci_reset_bus() return value instead of printing junk when
it fails
Qualcomm PCIe controller driver:
- Add SDX65 endpoint compatible string to DT binding
- Disable register write access after init for IP v2.3.3, v2.9.0
- Use DWC helpers for enabling/disabling writes to DBI registers
- Hide slot hotplug capability for IP v1.0.0, v1.9.0, v2.1.0, v2.3.2,
v2.3.3, v2.7.0, v2.9.0
- Reuse v2.3.2 post-init sequence for v2.4.0
Renesas R-Car PCIe controller driver:
- Remove unused static pcie_base and pcie_dev
Rockchip PCIe controller driver:
- Remove writes to unused registers
- Write endpoint Device ID using correct register
- Assert PCI Configuration Enable bit after probe so endpoint
responds instead of generating Request Retry Status messages
- Poll waiting for PHY PLLs to lock
- Update RK3399 example DT binding to be valid
- Use RK3399 PCIE_CLIENT_LEGACY_INT_CTRL to generate INTx instead of
manually generating PCIe message
- Use multiple windows to avoid address translation conflicts
- Use u32 (not u16) when accessing 32-bit registers
- Hide MSI-X Capability, since RK3399 can't generate MSI-X
- Set endpoint controller required alignment to 256
Synopsys DesignWare PCIe controller driver:
- Wait for link to come up only if we've initiated link training
Miscellaneous:
- Add pci_clear_master() stub for non-CONFIG_PCI"
* tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
Documentation: PCI: correct spelling
PCI: vmd: Fix uninitialized variable usage in vmd_enable_domain()
PCI: xgene-msi: Convert to platform remove callback returning void
PCI: tegra: Convert to platform remove callback returning void
PCI: rockchip-host: Convert to platform remove callback returning void
PCI: mvebu: Convert to platform remove callback returning void
PCI: mt7621: Convert to platform remove callback returning void
PCI: mediatek-gen3: Convert to platform remove callback returning void
PCI: mediatek: Convert to platform remove callback returning void
PCI: iproc: Convert to platform remove callback returning void
PCI: hisi-error: Convert to platform remove callback returning void
PCI: dwc: Convert to platform remove callback returning void
PCI: j721e: Convert to platform remove callback returning void
PCI: brcmstb: Convert to platform remove callback returning void
PCI: altera-msi: Convert to platform remove callback returning void
PCI: altera: Convert to platform remove callback returning void
PCI: aardvark: Convert to platform remove callback returning void
PCI: rcar: Use correct product family name for Renesas R-Car
PCI: layerscape: Add the endpoint linkup notifier support
PCI: endpoint: pci-epf-vntb: Fix typo in comments
...
|
||
|
Linus Torvalds
|
28968f384b |
Merge tag 'pinctrl-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij: "No core changes this time New drivers: - Tegra234 support - Qualcomm IPQ5018 support - Intel Meteor Lake-S support - Qualcomm SDX75 subdriver - Qualcomm SPMI-based PM8953 support Improvements: - Fix up support for GPIO3 on the AXP209 - Push-pull drive configuration support for the AT91 PIO4 - Fix misc non-urgent bugs in the AMD driver - Misc non-urgent improved error handling - Misc janitorial and minor improvements" * tag 'pinctrl-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (75 commits) pinctrl: cherryview: Drop goto label pinctrl: baytrail: invert if condition pinctrl: baytrail: add warning for BYT_VAL_REG retrieval failure pinctrl: baytrail: reduce scope of spinlock in ->dbg_show() hook pinctrl: tegra: avoid duplicate field initializers dt-bindings: pinctrl: qcom,sdx65-tlmm: add pcie_clkreq function pinctrl: mlxbf3: remove broken Kconfig 'select' pinctrl: spear: Remove unused of_gpio.h inclusion pinctrl: lantiq: Remove unused of_gpio.h inclusion pinctrl: at91-pio4: check return value of devm_kasprintf() pinctrl: microchip-sgpio: check return value of devm_kasprintf() pinctrl: freescale: Fix a memory out of bounds when num_configs is 1 pinctrl: intel: refine ->irq_set_type() hook pinctrl: intel: refine ->set_mux() hook pinctrl: baytrail: Use str_hi_lo() helper lib/string_choices: Add str_high_low() helper lib/string_helpers: Split out string_choices.h lib/string_helpers: Add missing header files to MAINTAINERS database pinctrl: npcm7xx: Add missing check for ioremap pinctrl:sunplus: Add check for kmalloc ... |
||
|
Linus Torvalds
|
9c3255a8f3 |
Merge tag 'platform-drivers-x86-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede: "AMD PMC and PMF drivers: - Various bugfixes - Improved debugging support Intel PMC: - Refactor to support hw with multiple PMCs - Various other improvements / new hw support Intel Speed Select Technology (ISST): - TPMI Uncore Frequency + Cluster Level Power Controls - Various bugfixes - tools/intel-speed-select: Misc improvements Dell-DDV: Add documentation INT3472 ACPI camera sensor glue code: - Evaluate device's _DSM method to control imaging clock - Drop the need to have a table with per sensor-model info Lenovo Yogabook: - Refactor / rework to also support Android models Think-LMI: - Multiple improvements and fixes WMI: - Add proper API documentation for the WMI bus x86-android-tablets: - Misc new hw support Miscellaneous other cleanups / fixes" * tag 'platform-drivers-x86-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (91 commits) platform/x86:intel/pmc: Add Meteor Lake IOE-M PMC related maps platform/x86:intel/pmc: Add Meteor Lake IOE-P PMC related maps platform/x86:intel/pmc: Use SSRAM to discover pwrm base address of primary PMC platform/x86:intel/pmc: Discover PMC devices platform/x86:intel/pmc: Enable debugfs multiple PMC support platform/x86:intel/pmc: Add support to handle multiple PMCs platform/x86:intel/pmc: Combine core_init() and core_configure() platform/x86:intel/pmc: Update maps for Meteor Lake P/M platforms platform/x86/intel: tpmi: Remove hardcoded unit and offset platform/x86: int3472: discrete: Log a warning if the pin-numbers don't match platform/x86: int3472: discrete: Use FIELD_GET() on the GPIO _DSM return value platform/x86: int3472: discrete: Add alternative "AVDD" regulator supply name platform/x86: int3472: discrete: Add support for 1 GPIO regulator shared between 2 sensors platform/x86: int3472: discrete: Remove sensor_config-s platform/x86: int3472: discrete: Drop GPIO remapping support platform/x86: apple-gmux: don't use be32_to_cpu and cpu_to_be32 platform/x86/dell/dell-rbtn: Fix resources leaking on error path platform/x86: ISST: Fix usage counter platform/x86: ISST: Reset default callback on unregister platform/x86: int3472: Switch back to use struct i2c_driver's .probe() ... |
||
|
Linus Torvalds
|
6cdbb0907a |
Merge tag 'for-6.5/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Update DM crypt to allocate compound pages if possible
- Fix DM crypt target's crypt_ctr_cipher_new return value on invalid
AEAD cipher
- Fix DM flakey testing target's write bio corruption feature to
corrupt the data of a cloned bio instead of the original
- Add random_read_corrupt and random_write_corrupt features to DM
flakey target
- Fix ABBA deadlock in DM thin metadata by resetting associated bufio
client rather than destroying and recreating it
- A couple other small DM thinp cleanups
- Update DM core to support disabling block core IO stats accounting
and optimize away code that isn't needed if stats are disabled
- Other small DM core cleanups
- Improve DM integrity target to not require so much memory on 32 bit
systems. Also only allocate the recalculate buffer as needed (and
increasingly reduce its size on allocation failure)
- Update DM integrity to use %*ph for printing hexdump of a small
buffer. Also update DM integrity documentation
- Various DM core ioctl interface hardening. Now more careful about
alignment of structures and processing of input passed to the kernel
from userspace.
Also disallow the creation of DM devices named "control", "." or ".."
- Eliminate GFP_NOIO workarounds for __vmalloc and kvmalloc in DM
core's ioctl and bufio code
* tag 'for-6.5/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (28 commits)
dm: get rid of GFP_NOIO workarounds for __vmalloc and kvmalloc
dm integrity: scale down the recalculate buffer if memory allocation fails
dm integrity: only allocate recalculate buffer when needed
dm integrity: reduce vmalloc space footprint on 32-bit architectures
dm ioctl: Refuse to create device named "." or ".."
dm ioctl: Refuse to create device named "control"
dm ioctl: Avoid double-fetch of version
dm ioctl: structs and parameter strings must not overlap
dm ioctl: Avoid pointer arithmetic overflow
dm ioctl: Check dm_target_spec is sufficiently aligned
Documentation: dm-integrity: Document an example of how the tunables relate.
Documentation: dm-integrity: Document default values.
Documentation: dm-integrity: Document the meaning of "buffer".
Documentation: dm-integrity: Fix minor grammatical error.
dm integrity: Use %*ph for printing hexdump of a small buffer
dm thin: disable discards for thin-pool if no_discard_passdown
dm: remove stale/redundant dm_internal_{suspend,resume} prototypes in dm.h
dm: skip dm-stats work in alloc_io() unless needed
dm: avoid needless dm_io access if all IO accounting is disabled
dm: support turning off block-core's io stats accounting
...
|
||
|
Linus Torvalds
|
ca7ce08d6a |
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, pm80xx, libata-scsi, smartpqi,
lpfc, qla2xxx).
We have a couple of major core changes impacting other systems:
- Command Duration Limits, which spills into block and ATA
- block level Persistent Reservation Operations, which touches block,
nvme, target and dm
Both of these are added with merge commits containing a cover letter
explaining what's going on"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (187 commits)
scsi: core: Improve warning message in scsi_device_block()
scsi: core: Replace scsi_target_block() with scsi_block_targets()
scsi: core: Don't wait for quiesce in scsi_device_block()
scsi: core: Don't wait for quiesce in scsi_stop_queue()
scsi: core: Merge scsi_internal_device_block() and device_block()
scsi: sg: Increase number of devices
scsi: bsg: Increase number of devices
scsi: qla2xxx: Remove unused nvme_ls_waitq wait queue
scsi: ufs: ufs-pci: Add support for Intel Arrow Lake
scsi: sd: sd_zbc: Use PAGE_SECTORS_SHIFT
scsi: ufs: wb: Add explicit flush_threshold sysfs attribute
scsi: ufs: ufs-qcom: Switch to the new ICE API
scsi: ufs: dt-bindings: qcom: Add ICE phandle
scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_RTC quirk
scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_INTR quirk
scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_RTC
scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_INTR
scsi: ufs: core: Remove dedicated hwq for dev command
scsi: ufs: core: mcq: Fix the incorrect OCS value for the device command
scsi: ufs: dt-bindings: samsung,exynos: Drop unneeded quotes
...
|
||
|
Linus Torvalds
|
1546cd4bfd |
Merge tag 'ata-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata updates from Damien Le Moal: - Add support for the .remove_new callback to the ata_platform code to simplify device removal interface (Uwe) - Code simplification in ata_dev_revalidate() (Yahu) - Fix code indentation and coding style in the pata_parport protocol modules to avoid warnings from static code analyzers (me) - Clarify ata_eh_qc_retry() behavior with better comments (Niklas) - Simplify and improve ata_change_queue_depth() behavior to have a consistent behavior between libsas managed devices and libata managed devices (e.g. AHCI connected devices) (me) - Cleanup libata-scsi and libata-eh code to use the ata_ncq_enabled() and ata_ncq_supported() helpers instead of open coding flags tests (me) - Cleanup ahci_reset_controller() code (me) - Change the pata_octeon_cf and sata_svw drivers to use of_property_read_reg() to simplify the code (Rob, me) - Remove unnecessary include files from ahci_octeon driver (me) - Modify the DesignWare ahci dt bindings to add support for the Rockchip RK3588 AHCI (Sebastian) * tag 'ata-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (29 commits) dt-bindings: phy: rockchip: rk3588 has two reset lines dt-bindings: ata: dwc-ahci: add Rockchip RK3588 dt-bindings: ata: dwc-ahci: add PHY clocks ata: ahci_octeon: Remove unnecessary include ata: pata_octeon_cf: Add missing header include ata: ahci: Cleanup ahci_reset_controller() ata: Use of_property_read_reg() to parse "reg" ata: libata-scsi: Use ata_ncq_supported in ata_scsi_dev_config() ata: libata-eh: Use ata_ncq_enabled() in ata_eh_speed_down() ata: libata-sata: Improve ata_change_queue_depth() ata: libata-sata: Simplify ata_change_queue_depth() ata: libata-eh: Clarify ata_eh_qc_retry() behavior at call site ata: pata_parport: Fix on26 module code indentation and style ata: pata_parport: Fix on20 module code indentation and style ata: pata_parport: Fix ktti module code indentation and style ata: pata_parport: Fix kbic module code indentation and style ata: pata_parport: Fix friq module code indentation and style ata: pata_parport: Fix fit3 module code indentation and style ata: pata_parport: Fix fit2 module code indentation and style ata: pata_parport: Fix epia module code indentation and style ... |
||
|
Linus Torvalds
|
b30d7a77c5 |
Merge tag 'perf-tools-for-v6.5-1-2023-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next
Pull perf tools updates from Namhyung Kim:
"Internal cleanup:
- Refactor PMU data management to handle hybrid systems in a generic
way.
Do more work in the lexer so that legacy event types parse more
easily. A side-effect of this is that if a PMU is specified,
scanning sysfs is avoided improving start-up time.
- Fix hybrid metrics, for example, the TopdownL1 works for both
performance and efficiency cores on Intel machines. To support
this, sort and regroup events after parsing.
- Add reference count checking for the 'thread' data structure.
- Lots of fixes for memory leaks in various places thanks to the ASAN
and Ian's refcount checker.
- Reduce the binary size by replacing static variables with local or
dynamically allocated memory.
- Introduce shared_mutex for annotate data to reduce memory
footprint.
- Make filesystem access library functions more thread safe.
Test:
- Organize cpu_map tests into a single suite.
- Add metric value validation test to check if the values are within
correct value ranges.
- Add perf stat stdio output test to check if event and metric names
match.
- Add perf data converter JSON output test.
- Fix a lot of issues reported by shellcheck(1). This is a
preparation to enable shellcheck by default.
- Make the large x86 new instructions test optional at build time
using EXTRA_TESTS=1.
- Add a test for libpfm4 events.
perf script:
- Add 'dsoff' outpuf field to display offset from the DSO.
$ perf script -F comm,pid,event,ip,dsoff
ls 2695501 cycles: 152cc73ef4b5 (/usr/lib/x86_64-linux-gnu/ld-2.31.so+0x1c4b5)
ls 2695501 cycles: ffffffff99045b3e ([kernel.kallsyms])
ls 2695501 cycles: ffffffff9968e107 ([kernel.kallsyms])
ls 2695501 cycles: ffffffffc1f54afb ([kernel.kallsyms])
ls 2695501 cycles: ffffffff9968382f ([kernel.kallsyms])
ls 2695501 cycles: ffffffff99e00094 ([kernel.kallsyms])
ls 2695501 cycles: 152cc718a8d0 (/usr/lib/x86_64-linux-gnu/libselinux.so.1+0x68d0)
ls 2695501 cycles: ffffffff992a6db0 ([kernel.kallsyms])
- Adjust width for large PID/TID values.
perf report:
- Robustify reading addr2line output for srcline by checking sentinel
output before the actual data and by using timeout of 1 second.
- Allow config terms (like 'name=ABC') with breakpoint events.
$ perf record -e mem:0x55feb98dd169:x/name=breakpoint/ -p 19646 -- sleep 1
perf annotate:
- Handle x86 instruction suffix like 'l' in 'movl' generally.
- Parse instruction operands properly even with a whitespace. This is
needed for llvm-objdump output.
- Support RISC-V binutils lookup using the triplet prefixes.
- Add '<' and '>' key to navigate to prev/next symbols in TUI.
- Fix instruction association and parsing for LoongArch.
perf stat:
- Add --per-cache aggregation option, optionally specify a cache
level like `--per-cache=L2`.
$ sudo perf stat --per-cache -a -e ls_dmnd_fills_from_sys.ext_cache_remote --\
taskset -c 0-15,64-79,128-143,192-207\
perf bench sched messaging -p -t -l 100000 -g 8
# Running 'sched/messaging' benchmark:
# 20 sender and receiver threads per group
# 8 groups == 320 threads run
Total time: 7.648 [sec]
Performance counter stats for 'system wide':
S0-D0-L3-ID0 16 17,145,912 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID8 16 14,977,628 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID16 16 262,539 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID24 16 3,140 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID32 16 27,403 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID40 16 17,026 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID48 16 7,292 ls_dmnd_fills_from_sys.ext_cache_remote
S0-D0-L3-ID56 16 2,464 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID64 16 22,489,306 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID72 16 21,455,257 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID80 16 11,619 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID88 16 30,978 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID96 16 37,628 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID104 16 13,594 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID112 16 10,164 ls_dmnd_fills_from_sys.ext_cache_remote
S1-D1-L3-ID120 16 11,259 ls_dmnd_fills_from_sys.ext_cache_remote
7.779171484 seconds time elapsed
- Change default (no event/metric) formatting for default metrics so
that events are hidden and the metric and group appear.
Performance counter stats for 'ls /':
1.85 msec task-clock # 0.594 CPUs utilized
0 context-switches # 0.000 /sec
0 cpu-migrations # 0.000 /sec
97 page-faults # 52.517 K/sec
2,187,173 cycles # 1.184 GHz
2,474,459 instructions # 1.13 insn per cycle
531,584 branches # 287.805 M/sec
13,626 branch-misses # 2.56% of all branches
TopdownL1 # 23.5 % tma_backend_bound
# 11.5 % tma_bad_speculation
# 39.1 % tma_frontend_bound
# 25.9 % tma_retiring
- Allow --cputype option to have any PMU name (not just hybrid).
- Fix output value not to added when it runs multiple times with -r
option.
perf list:
- Show metricgroup description from JSON file called
metricgroups.json.
- Allow 'pfm' argument to list only libpfm4 events and check each
event is supported before showing it.
JSON vendor events:
- Avoid event grouping using "NO_GROUP_EVENTS" constraints. The
topdown events are correctly grouped even if no group exists.
- Add "Default" metric group to print it in the default output. And
use "DefaultMetricgroupName" to indicate the real metric group
name.
- Add AmpereOne core PMU events.
Misc:
- Define man page date correctly.
- Track exception level properly on ARM CoreSight ETM.
- Allow anonymous struct, union or enum when retrieving type names
from DWARF.
- Fix incorrect filename when calling `perf inject --jit`.
- Handle PLT size correctly on LoongArch"
* tag 'perf-tools-for-v6.5-1-2023-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next: (269 commits)
perf test: Skip metrics w/o event name in stat STD output linter
perf test: Reorder event name checks in stat STD output linter
perf pmu: Remove a hard coded cpu PMU assumption
perf pmus: Add notion of default PMU for JSON events
perf unwind: Fix map reference counts
perf test: Set PERF_EXEC_PATH for script execution
perf script: Initialize buffer for regs_map()
perf tests: Fix test_arm_callgraph_fp variable expansion
perf symbol: Add LoongArch case in get_plt_sizes()
perf test: Remove x permission from lib/stat_output.sh
perf test: Rerun failed metrics with longer workload
perf test: Add skip list for metrics known would fail
perf test: Add metric value validation test
perf jit: Fix incorrect file name in DWARF line table
perf annotate: Fix instruction association and parsing for LoongArch
perf annotation: Switch lock from a mutex to a sharded_mutex
perf sharded_mutex: Introduce sharded_mutex
tools: Fix incorrect calculation of object size by sizeof
perf subcmd: Fix missing check for return value of malloc() in add_cmdname()
perf parse-events: Remove unneeded semicolon
...
|
||
|
Linus Torvalds
|
d2a6fd45c5 |
Merge tag 'probes-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
- fprobe: Pass return address to the fprobe entry/exit callbacks so
that the callbacks don't need to analyze pt_regs/stack to find the
function return address.
- kprobe events: cleanup usage of TPARG_FL_FENTRY and TPARG_FL_RETURN
flags so that those are not set at once.
- fprobe events:
- Add a new fprobe events for tracing arbitrary function entry and
exit as a trace event.
- Add a new tracepoint events for tracing raw tracepoint as a
trace event. This allows user to trace non user-exposed
tracepoints.
- Move eprobe's event parser code into probe event common file.
- Introduce BTF (BPF type format) support to kernel probe (kprobe,
fprobe and tracepoint probe) events so that user can specify
traced function arguments by name. This also applies the type of
argument when fetching the argument.
- Introduce '$arg*' wildcard support if BTF is available. This
expands the '$arg*' meta argument to all function argument
automatically.
- Check the return value types by BTF. If the function returns
'void', '$retval' is rejected.
- Add some selftest script for fprobe events, tracepoint events
and BTF support.
- Update documentation about the fprobe events.
- Some fixes for above features, document and selftests.
- selftests for ftrace (in addition to the new fprobe events):
- Add a test case for multiple consecutive probes in a function
which checks if ftrace based kprobe, optimized kprobe and normal
kprobe can be defined in the same target function.
- Add a test case for optimized probe, which checks whether kprobe
can be optimized or not.
* tag 'probes-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/probes: Fix tracepoint event with $arg* to fetch correct argument
Documentation: Fix typo of reference file name
tracing/probes: Fix to return NULL and keep using current argc
selftests/ftrace: Add new test case which checks for optimized probes
selftests/ftrace: Add new test case which adds multiple consecutive probes in a function
Documentation: tracing/probes: Add fprobe event tracing document
selftests/ftrace: Add BTF arguments test cases
selftests/ftrace: Add tracepoint probe test case
tracing/probes: Add BTF retval type support
tracing/probes: Add $arg* meta argument for all function args
tracing/probes: Support function parameters if BTF is available
tracing/probes: Move event parameter fetching code to common parser
tracing/probes: Add tracepoint support on fprobe_events
selftests/ftrace: Add fprobe related testcases
tracing/probes: Add fprobe events for tracing function entry and exit.
tracing/probes: Avoid setting TPARG_FL_FENTRY and TPARG_FL_RETURN
fprobe: Pass return address to the handlers
|
||
|
Linus Torvalds
|
cccf0c2ee5 |
Merge tag 'trace-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt: - Add new feature to have function graph tracer record the return value. Adds a new option: funcgraph-retval ; when set, will show the return value of a function in the function graph tracer. - Also add the option: funcgraph-retval-hex where if it is not set, and the return value is an error code, then it will return the decimal of the error code, otherwise it still reports the hex value. - Add the file /sys/kernel/tracing/osnoise/per_cpu/cpu<cpu>/timerlat_fd That when a application opens it, it becomes the task that the timer lat tracer traces. The application can also read this file to find out how it's being interrupted. - Add the file /sys/kernel/tracing/available_filter_functions_addrs that works just the same as available_filter_functions but also shows the addresses of the functions like kallsyms, except that it gives the address of where the fentry/mcount jump/nop is. This is used by BPF to make it easier to attach BPF programs to ftrace hooks. - Replace strlcpy with strscpy in the tracing boot code. * tag 'trace-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: Fix warnings when building htmldocs for function graph retval riscv: ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL tracing/boot: Replace strlcpy with strscpy tracing/timerlat: Add user-space interface tracing/osnoise: Skip running osnoise if all instances are off tracing/osnoise: Switch from PF_NO_SETAFFINITY to migrate_disable ftrace: Show all functions with addresses in available_filter_functions_addrs selftests/ftrace: Add funcgraph-retval test case LoongArch: ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL x86/ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL arm64: ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL tracing: Add documentation for funcgraph-retval and funcgraph-retval-hex function_graph: Support recording and printing the return value of function fgraph: Add declaration of "struct fgraph_ret_regs" |
||
|
Linus Torvalds
|
533925cb76 |
Merge tag 'riscv-for-linus-6.5-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt: - Support for ACPI - Various cleanups to the ISA string parsing, including making them case-insensitive - Support for the vector extension - Support for independent irq/softirq stacks - Our CPU DT binding now has "unevaluatedProperties: false" * tag 'riscv-for-linus-6.5-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (78 commits) riscv: hibernate: remove WARN_ON in save_processor_state dt-bindings: riscv: cpus: switch to unevaluatedProperties: false dt-bindings: riscv: cpus: add a ref the common cpu schema riscv: stack: Add config of thread stack size riscv: stack: Support HAVE_SOFTIRQ_ON_OWN_STACK riscv: stack: Support HAVE_IRQ_EXIT_ON_IRQ_STACK RISC-V: always report presence of extensions formerly part of the base ISA dt-bindings: riscv: explicitly mention assumption of Zicntr & Zihpm support RISC-V: remove decrement/increment dance in ISA string parser RISC-V: rework comments in ISA string parser RISC-V: validate riscv,isa at boot, not during ISA string parsing RISC-V: split early & late of_node to hartid mapping RISC-V: simplify register width check in ISA string parsing perf: RISC-V: Limit the number of counters returned from SBI riscv: replace deprecated scall with ecall riscv: uprobes: Restore thread.bad_cause riscv: mm: try VMA lock-based page fault handling first riscv: mm: Pre-allocate PGD entries for vmalloc/modules area RISC-V: hwprobe: Expose Zba, Zbb, and Zbs RISC-V: Track ISA extensions per hart ... |
||
|
Linus Torvalds
|
d8b0bd57c2 |
Merge tag 'powerpc-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman: - Extend KCSAN support to 32-bit and BookE. Add some KCSAN annotations - Make ELFv2 ABI the default for 64-bit big-endian kernel builds, and use the -mprofile-kernel option (kernel specific ftrace ABI) for big endian ELFv2 kernels - Add initial Dynamic Execution Control Register (DEXCR) support, and allow the ROP protection instructions to be used on Power 10 - Various other small features and fixes Thanks to Aditya Gupta, Aneesh Kumar K.V, Benjamin Gray, Brian King, Christophe Leroy, Colin Ian King, Dmitry Torokhov, Gaurav Batra, Jean Delvare, Joel Stanley, Marco Elver, Masahiro Yamada, Nageswara R Sastry, Nathan Chancellor, Naveen N Rao, Nayna Jain, Nicholas Piggin, Paul Gortmaker, Randy Dunlap, Rob Herring, Rohan McLure, Russell Currey, Sachin Sant, Timothy Pearson, Tom Rix, and Uwe Kleine-König. * tag 'powerpc-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (76 commits) powerpc: remove checks for binutils older than 2.25 powerpc: Fail build if using recordmcount with binutils v2.37 powerpc/iommu: TCEs are incorrectly manipulated with DLPAR add/remove of memory powerpc/iommu: Only build sPAPR access functions on pSeries powerpc: powernv: Annotate data races in opal events powerpc: Mark writes registering ipi to host cpu through kvm and polling powerpc: Annotate accesses to ipi message flags powerpc: powernv: Fix KCSAN datarace warnings on idle_state contention powerpc: Mark [h]ssr_valid accesses in check_return_regs_valid powerpc: qspinlock: Enforce qnode writes prior to publishing to queue powerpc: qspinlock: Mark accesses to qnode lock checks powerpc/powernv/pci: Remove last IODA1 defines powerpc/powernv/pci: Remove MVE code powerpc/powernv/pci: Remove ioda1 support powerpc: 52xx: Make immr_id DT match tables static powerpc: mpc512x: Remove open coded "ranges" parsing powerpc: fsl_soc: Use of_range_to_resource() for "ranges" parsing powerpc: fsl: Use of_property_read_reg() to parse "reg" powerpc: fsl_rio: Use of_range_to_resource() for "ranges" parsing macintosh: Use of_property_read_reg() to parse "reg" ... |
||
|
Kees Cook
|
b69f0aeb06 |
pid: Replace struct pid 1-element array with flex-array
For pid namespaces, struct pid uses a dynamically sized array member, "numbers". This was implemented using the ancient 1-element fake flexible array, which has been deprecated for decades. Replace it with a C99 flexible array, refactor the array size calculations to use struct_size(), and address elements via indexes. Note that the static initializer (which defines a single element) works as-is, and requires no special handling. Without this, CONFIG_UBSAN_BOUNDS (and potentially CONFIG_FORTIFY_SOURCE) will trigger bounds checks: https://lore.kernel.org/lkml/20230517-bushaltestelle-super-e223978c1ba6@brauner Cc: Christian Brauner <brauner@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jeff Xu <jeffxu@google.com> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Daniel Verkamp <dverkamp@chromium.org> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Jeff Xu <jeffxu@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Frederic Weisbecker <frederic@kernel.org> Reported-by: syzbot+ac3b41786a2d0565b6d5@syzkaller.appspotmail.com [brauner: dropped unrelated changes and remove 0 with NULL cast] Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
112e7e2151 |
Merge tag 'loongarch-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen: - preliminary ClangBuiltLinux enablement - add support to clone a time namespace - add vector extensions support - add SMT (Simultaneous Multi-Threading) support - support dbar with different hints - introduce hardware page table walker - add jump-label implementation - add rethook and uprobes support - some bug fixes and other small changes * tag 'loongarch-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (28 commits) LoongArch: Remove five DIE_* definitions in kdebug.h LoongArch: Add uprobes support LoongArch: Use larch_insn_gen_break() for kprobes LoongArch: Add larch_insn_gen_break() to generate break insns LoongArch: Check for AMO instructions in insns_not_supported() LoongArch: Move three functions from kprobes.c to inst.c LoongArch: Replace kretprobe with rethook LoongArch: Add jump-label implementation LoongArch: Select HAVE_DEBUG_KMEMLEAK to support kmemleak LoongArch: Export some arch-specific pm interfaces LoongArch: Introduce hardware page table walker LoongArch: Support dbar with different hints LoongArch: Add SMT (Simultaneous Multi-Threading) support LoongArch: Add vector extensions support LoongArch: Add support to clone a time namespace Makefile: Add loongarch target flag for Clang compilation LoongArch: Mark Clang LTO as working LoongArch: Include KBUILD_CPPFLAGS in CHECKFLAGS invocation LoongArch: vDSO: Use CLANG_FLAGS instead of filtering out '--target=' LoongArch: Tweak CFLAGS for Clang compatibility ... |
||
|
Andrew Morton
|
44f10dbefd | Merge branch 'master' into mm-hotfixes-stable | ||
|
Andrew Morton
|
0a30901b07 | Merge branch 'master' into mm-hotfixes-stable | ||
|
Helge Deller
|
4ad1218bed |
parisc: Refresh defconfigs
Refresh defconfigs and enable some more graphic cards. Signed-off-by: Helge Deller <deller@gmx.de> |
||
|
Helge Deller
|
bcfaf17f18 |
parisc: irq: Add irq-related function declarations
Move function declarations for do_cpu_irq_mask(), timer_interrupt() and ipi_interrupt() to header file. Signed-off-by: Helge Deller <deller@gmx.de> |
||
|
Helge Deller
|
f310f8dd14 |
parisc: Move init function declarations into header file
Clean up the code to not have external function declarations inside the C source files. Reduces warnings when compiled with W=1. Signed-off-by: Helge Deller <deller@gmx.de> |
||
|
Helge Deller
|
c8080024e0 |
parisc: dino: Make dino_init() returning void
Signed-off-by: Helge Deller <deller@gmx.de> |
||
|
Helge Deller
|
1d72e83d63 |
parisc: lba_pci: Mark two variables __maybe_unused
Signed-off-by: Helge Deller <deller@gmx.de> |