XLR has one network controller and XLS has two network controllers, each
controller has 4 gmac devices. This patch initializes each controller as
a parent device and the four gmac devices of a controller are connected
to the parent controller as a child
Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SGMII PHY address calculation should be based on phy_addr of priv data
Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function name nlm_cop2_enable() and nlm_cop2_restore() in
file "netlogic/xlr/fmn.c" has been renamed to nlm_cop2_enable_irqsave
and nlm_cop2_disable_irqrestore respectively in commit "64f6ebe
MIPS: Netlogic: rename nlm_cop2_save/restore".
This patch takes care of these changes
Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch.pl switch and case should be at the same indent errors
Signed-off-by: Greg Donald <gdonald@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch.pl space prohibited before that close parenthesis ')' errors
Signed-off-by: Greg Donald <gdonald@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following sparse warnings in rtl8821ae/stats.c
drivers/staging/rtl8821ae/stats.c:62:6: warning: symbol 'rtl_translate_todbm' was not declared. Should it be static?
drivers/staging/rtl8821ae/stats.c:101:6: warning: symbol 'rtl_process_ui_rssi' was not declared. Should it be static?
Signed-off-by: Hoang Tran <hoangtran.gwr@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fixes:
drivers/staging/built-in.o:(.opd+0xaab8): multiple definition of `rtl88e_phy_rf_config'
drivers/net/built-in.o:(.opd+0x78840): first defined here
drivers/staging/built-in.o:(.opd+0xa9f8): multiple definition of `rtl88e_download_fw'
drivers/net/built-in.o:(.opd+0x781b0): first defined here
drivers/staging/built-in.o: In function `.rtl88e_phy_rf_config':
(.text+0xe0a00): multiple definition of `.rtl88e_phy_rf_config'
drivers/net/built-in.o:(.text+0xe85a48): first defined here
drivers/staging/built-in.o: In function `.rtl88e_download_fw':
(.text+0xdf28c): multiple definition of `.rtl88e_download_fw'
drivers/net/built-in.o:(.text+0xe6f330): first defined here
drivers/staging/built-in.o: In function `.rtl88e_phy_mac_config':
(.text+0xdf984): multiple definition of `.rtl88e_phy_mac_config'
drivers/net/built-in.o:(.text+0xe84a8c): first defined here
drivers/staging/built-in.o: In function `.rtl88e_phy_bb_config':
(.text+0xdfa2c): multiple definition of `.rtl88e_phy_bb_config'
drivers/net/built-in.o:(.text+0xe84d14): first defined here
drivers/staging/built-in.o:(.opd+0xaa58): multiple definition of `rtl88e_phy_bb_config'
drivers/net/built-in.o:(.opd+0x78828): first defined here
drivers/staging/built-in.o:(.opd+0xaa28): multiple definition of `rtl88e_phy_mac_config'
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a merger of PSTxDataHead_ab and PSTxShortBufHead of which typedef struct tagSTxShortBufHead
is removed.
This is formed as fifo_ctl, time_stamp, struct vnt_phy_field, duration and time_stamp_off.
Replacing stuctures in csBeacon_xmit and doing endian correction where necessary.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix conflict with WLAN_EID macros, by removing them.
This allows the adding other definitions from the ieee80211 header.
Eventually the 80211mgr.h header will be removed.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The module can not load more than once.
Remove device_nics, MAX_UINTS and OPTION_DEFAULT
Remove dead index variable from device_get_options
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver can only load once from the instance provided
by pci_dev.
struct vnt_private next, prev and pDevice_Infos are removed.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove data members bySignalField*, byServiceField*, wTransmitLength*
from structures in desc.h
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using vnt_get_phy_field means the values are not in the
correct write order the lower word and the upper word need
to be swapped over for an u32 write out.
Rather create another data variable to manipulate this structure.
Create a new union vnt_phy_field_swap with struct vnt_phy_field,
the u16 word swap and the u32 write out.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a replacement for BBvCalculateParameter for getting
the phy fields via struct vnt_phy_field
This is a direct copy from the vt6656 driver.
BBvCalculateParameter will removed later.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This will replace bySignalField*, byServiceField* and wTransmitLength_b
members of these strutures, these are removed in the last patch.
The len member is of little endian type.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bCCK is always set to true, the only place it is used is in
BBvCalculateParameter which nots the value to false.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PLICE_DEBUG is not defined in any header for this file.
Remove code, references and directives.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ether_crc is already in kernel remove local code and
include linux/crc32.h
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes the following sparse warning:
drivers/staging/rtl8188eu/hal/HalHWImg8188E_MAC.c:119:6: warning: symbol
'rtl88e_phy_mac_config' was not declared. Should it be static?
Signed-off-by: Max Vozeler <max@hinterhof.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This implements NAPI support for et131x by:
-adding a napi_struct to the private adapter struct
-changing netfif_rx_skb() call to netif_receive_skb()
-changing et131x_handle_recv_interrupt() to et131x_handle_recv_pkts()
and taking a budget allocation.
-changing et131x_handle_send_interrupt() to et131x_handle_send_pkts()
-replacing bottom half workqueue with poll function which handles
send & receive of skbs.
-adding various other necessary standard napi calls.
Also remove this item from the README TODO list.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We actually mean to clear the ET_INTR_TXDMA_ISR reg after handling
a completed transfer, not the ET_INTR_TXDMA_ERR reg, which should
get handled immediately after.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace a long list of contiguous writel() calls with a for loop iterating
over the same address values.
Also remove redundant comments on the macstat registers, the variable names
are good enough.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace a long list of contiguous writel() calls with a for loop iterating
over the same values.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's no need to handle any rx/tx interrupts in the middle of an mtu
change, so don't.
After this change, receive and transmit interrupts are only handled in
one place, which paves the way to using NAPI.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Static variables are initialised to 0 by GCC.
Fixes checkpatch.pl error:
ERROR: do not initialise statics to 0 or NULL
#684: FILE: jr3_pci.c:684:
+ static const struct jr3_pci_board *board = NULL;
Signed-off-by: Vladimir A. Nazarenko <naszar@ya.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sparse has many warnings like:
drivers/staging/comedi/drivers/usbduxsigma.c:293:21: warning: cast to
restricted __be32
on lines on which devpriv->in_buf is passed to be32_to_cpu(). This
suggests that this variable should actually be of type __be32.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sparse has many warnings like:
drivers/staging/comedi/drivers/usbdux.c:366:32: warning: cast to
restricted __le16
on lines on which devpriv->in_buf or devpriv->insn_buf are passed to
le16_to_cpu(). This suggests that both of these variables should actually
be of type __le16.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, to select the "comedi_bond" driver, the "kcomedilib" support
has to be selected first. It seems more natural to allow the
"comedi_bond" driver to be selected on its own and to automatically
select the "kcomedilib" module as a result of that. Change the
dependency/select relationship between the two configuration options to
do that.
Also, make "kcomedilib" a module that can be selected independently,
perhaps for use by out-of-tree modules, although it is not terribly
useful for anything other than "comedi_bond" currently.
Also, improve the help text for the config options.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The addition operation has higher precedence than ?: so this would write
to PCI230_DACOUT1 instead of devpriv->daqio + PCI230_DACOUT1.
Fixes: 4f9c63fe53 ('staging: comedi: amplc_pci230: refactor iobase addresses')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the dma buffers are freed during the detach of the driver using
the function s626_close_dma_b(). The buffers are also freed while the
interrupt handler is still attached. This could result in a race condition.
Refactor the code so that the buffers are freed after the interrupt handler
is released and the PCI device is disabled.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Factor the freeing of the dma buffers out of the (*detach).
Move the freeing of the buffers so that it occurs after the PCI device
has been disabled to avoid any race condition.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Factor the freeing of the dma buffers out of the (*detach).
Move the freeing of the buffers so that it occurs after the PCI device
has been disabled to avoid any race condition.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This member is set at the end of the driver attach and is only used to
verify that icp_multi_reset() can be called in the (*detach). The only
requirement for icp_multi_reset() to work is that the dev->mmio is valid.
Remove the 'valid' member from the private data and use 'dev->mmio' to
see if the reset can be done.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ganesan Ramalingam