[ Upstream commit e70a3263a7 ]
Currently, data[5..7] of struct can_frame, when used as a CAN error
frame, are defined as being "controller specific". Device specific
behaviours are problematic because it prevents someone from writing
code which is portable between devices.
As a matter of fact, data[5] is never used, data[6] is always used to
report TX error counter and data[7] is always used to report RX error
counter. can-utils also relies on this.
This patch updates the comment in the uapi header to specify that
data[5] is reserved (and thus should not be used) and that data[6..7]
are used for error counters.
Fixes: 0d66548a10 ("[CAN]: Add PF_CAN core module")
Link: https://lore.kernel.org/all/20220719143550.3681-11-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 597fbc4682 ]
Make libbpf adjust RINGBUF map size (rounding it up to closest power-of-2
of page_size) more eagerly: during open phase when initializing the map
and on explicit calls to bpf_map__set_max_entries().
Such approach allows user to check actual size of BPF ringbuf even
before it's created in the kernel, but also it prevents various edge
case scenarios where BPF ringbuf size can get out of sync with what it
would be in kernel. One of them (reported in [0]) is during an attempt
to pin/reuse BPF ringbuf.
Move adjust_ringbuf_sz() helper closer to its first actual use. The
implementation of the helper is unchanged.
Also make detection of whether bpf_object is already loaded more robust
by checking obj->loaded explicitly, given that map->fd can be < 0 even
if bpf_object is already loaded due to ability to disable map creation
with bpf_map__set_autocreate(map, false).
[0] Closes: https://github.com/libbpf/libbpf/pull/530
Fixes: 0087a681fa ("libbpf: Automatically fix up BPF_MAP_TYPE_RINGBUF size, if necessary")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220715230952.2219271-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87ac0d6009 ]
If BPF array map is bigger than 4GB, element pointer calculation can
overflow because both index and elem_size are u32. Fix this everywhere
by forcing 64-bit multiplication. Extract this formula into separate
small helper and use it consistently in various places.
Speculative-preventing formula utilizing index_mask trick is left as is,
but explicit u64 casts are added in both places.
Fixes: c85d69135a ("bpf: move memory size checks to bpf_map_charge_init()")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220715053146.1291891-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 958afce98c ]
Save the original stable pstate on ctx init and restore
it on ctx fini so that we restore a manually selected
stable pstate on ctx exit.
v2: fix init order (Alex)
v3: don't add new variable to ctx struct (Evan)
Fixes: c65b364c52 ("drm/amdgpu/ctx: only reset stable pstate if the user changed it (v2)")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98a90f1f0f ]
Align RDNA2.x with other asics. One HDP bit per SDMA instance,
aligned with firmware. This is effectively a revert of
commit 369b7d04ba ("drm/amdgpu/nbio2.3: don't use GPU_HDP_FLUSH bit 12").
On further discussions with the relevant hardware teams,
re-align the bits for SDMA.
Fixes: 369b7d04ba ("drm/amdgpu/nbio2.3: don't use GPU_HDP_FLUSH bit 12")
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 912db6a587 ]
Align aldebaran with all other asics. One HDP bit per
SDMA instance, aligned with firmware. This is effectively
a revert of
commit a0f9f85466 ("drm/amdgpu/nbio7.4: don't use GPU_HDP_FLUSH bit 12").
On further discussions with the relevant hardware teams,
re-align the bits for SDMA.
Fixes: a0f9f85466 ("drm/amdgpu/nbio7.4: don't use GPU_HDP_FLUSH bit 12")
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bcfd9d7f68 ]
The assignment of the value to the variable total in the loop
condition must be enclosed in additional parentheses, since otherwise,
in accordance with the precedence of the operators, the conjunction
will be performed first, and only then the assignment.
Due to this error, a warning later in the function after the loop may
not occur in the situation when it should.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Rustam Subkhankulov <subkhankulov@ispras.ru>
Fixes: 0d4171e215 ("p54: implement flush callback")
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220714134831.106004-1-subkhankulov@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1a413902a ]
Now that we know real purpose of "not low delay" flag, logic for
applying this flag should be fixed too. According to vendor and
reference implementation, low delay is signaled when POC of current
frame is lower than POC of at least one reference of a slice.
Implement mentioned logic and invert it to conform to flag meaning. Also
don't apply flag for I frames. They don't have any reference.
This fixes decoding of 3 reference bitstreams.
Fixes: 86caab29da ("media: cedrus: Add HEVC/H.265 decoding support")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4a179c716 ]
The HEVC specification describes the following:
"PicOrderCntVal is derived as follows:
PicOrderCntVal = PicOrderCntMsb + slice_pic_order_cnt_lsb
The value of PicOrderCntVal shall be in the range of
−2^31 to 2^31 − 1, inclusive."
To match with these definitions change __u16 pic_order_cnt[2]
into __s32 pic_order_cnt_val.
Change v4l2_ctrl_hevc_slice_params->slice_pic_order_cnt to __s32 too.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 104a70e1d0 ]
Bit 21 in register 0x24 (slice header info 1) actually represents
negated version of low delay flag. This can be seen in vendor Cedar
library source code. While this flag is not part of the standard, it can
be found in reference HEVC implementation.
Fix macro name and change it to flag.
Fixes: 86caab29da ("media: cedrus: Add HEVC/H.265 decoding support")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97ef77c52b ]
The original direct splicing mechanism from Jens required the input to
be a regular file because it was avoiding the special socket case. It
also recognized blkdevs as being close enough to a regular file. But it
forgot about chardevs, which behave the same way and work fine here.
This is an okayish heuristic, but it doesn't totally work. For example,
a few chardevs should be spliceable here. And a few regular files
shouldn't. This patch fixes this by instead checking whether FMODE_LSEEK
is set, which represents decently enough what we need rewinding for when
splicing to internal pipes.
Fixes: b92ce55893 ("[PATCH] splice: add direct fd <-> fd splicing support")
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46347e3ec6 ]
For camera sensor devices the firmware information of which comes from
non-DT (or some ACPI variants), the kernel makes the information visible
to the drivers in a form similar to DT. This takes place through device's
secondary fwnodes, in which case also the secondary fwnode needs to be
heterogenously (endpoint vs. device) matched.
Fixes: 1f391df446 ("media: v4l2-async: Use endpoints in __v4l2_async_nf_add_fwnode_remote()")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 284b38b690 ]
At least the quantenna driver calls wdev_chandef() here
which now requires the lock, so acquire it.
Fixes: 7b0a0e3c3a ("wifi: cfg80211: do some rework towards MLO link APIs")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d8f52ac5f ]
The return value from system() is a waitpid-style integer. Do not return
it directly because with the implicit masking in exit() it will always
return 0. Access it with appropriate macros to really pass on errors.
Fixes: 7290ce1423 ("selftests/timers: Add clocksource-switch test from timetest suite")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a162977d2 ]
Toolchains with an include file 'sys/timex.h' based on 3.18 will have a
'clock_adjtime' definition added, so it can't be static in the code:
valid-adjtimex.c:43:12: error: static declaration of ‘clock_adjtime’ follows non-static declaration
Fixes: e03a58c320 ("kselftests: timers: Add adjtimex SETOFFSET validity tests")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf3f003785 ]
BPF map name is limited to BPF_OBJ_NAME_LEN.
A map name is defined as being longer than BPF_OBJ_NAME_LEN,
it will be truncated to BPF_OBJ_NAME_LEN when a userspace program
calls libbpf to create the map. A pinned map also generates a path
in the /sys. If the previous program wanted to reuse the map，
it can not get bpf_map by name, because the name of the map is only
partially the same as the name which get from pinned path.
The syscall information below show that map name "process_pinned_map"
is truncated to "process_pinned_".
bpf(BPF_OBJ_GET, {pathname="/sys/fs/bpf/process_pinned_map",
bpf_fd=0, file_flags=0}, 144) = -1 ENOENT (No such file or directory)
bpf(BPF_MAP_CREATE, {map_type=BPF_MAP_TYPE_HASH, key_size=4,
value_size=4,max_entries=1024, map_flags=0, inner_map_fd=0,
map_name="process_pinned_",map_ifindex=0, btf_fd=3, btf_key_type_id=6,
btf_value_type_id=10,btf_vmlinux_value_type_id=0}, 72) = 4
This patch check that if the name of pinned map are the same as the
actual name for the first (BPF_OBJ_NAME_LEN - 1),
bpf map still uses the name which is included in bpf object.
Fixes: 26736eb9a4 ("tools: libbpf: allow map reuse")
Signed-off-by: Anquan Wu <leiqi96@hotmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/OSZP286MB1725CEA1C95C5CB8E7CCC53FB8869@OSZP286MB1725.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d5f82d9dd ]
syzbot reported a few issues with bpf_prog_pack [1], [2]. This only happens
with multiple subprogs. In jit_subprogs(), we first call bpf_int_jit_compile()
on each sub program. And then, we call it on each sub program again. jit_data
is not freed in the first call of bpf_int_jit_compile(). Similarly we don't
call bpf_jit_binary_pack_finalize() in the first call of bpf_int_jit_compile().
If bpf_int_jit_compile() failed for one sub program, we will call
bpf_jit_binary_pack_finalize() for this sub program. However, we don't have a
chance to call it for other sub programs. Then we will hit "goto out_free" in
jit_subprogs(), and call bpf_jit_free on some subprograms that haven't got
bpf_jit_binary_pack_finalize() yet.
At this point, bpf_jit_binary_pack_free() is called and the whole 2MB page is
freed erroneously.
Fix this with a custom bpf_jit_free() for x86_64, which calls
bpf_jit_binary_pack_finalize() if necessary. Also, with custom
bpf_jit_free(), bpf_prog_aux->use_bpf_prog_pack is not needed any more,
remove it.
Fixes: 1022a5498f ("bpf, x86_64: Use bpf_jit_binary_pack_alloc")
[1] https://syzkaller.appspot.com/bug?extid=2f649ec6d2eea1495a8f
[2] https://syzkaller.appspot.com/bug?extid=87f65c75f4a72db05445
Reported-by: syzbot+2f649ec6d2eea1495a8f@syzkaller.appspotmail.com
Reported-by: syzbot+87f65c75f4a72db05445@syzkaller.appspotmail.com
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20220706002612.4013790-1-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95acd8817e ]
The BPF core/verifier is hard-coded to permit mixing bpf2bpf and tail
calls for only x86-64. Change the logic to instead rely on a new weak
function 'bool bpf_jit_supports_subprog_tailcalls(void)', which a capable
JIT backend can override.
Update the x86-64 eBPF JIT to reflect this.
Signed-off-by: Tony Ambardar <Tony.Ambardar@gmail.com>
[jakub: drop MIPS bits and tweak patch subject]
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220617105735.733938-2-jakub@cloudflare.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 48b927770f ]
In exynos7_decon_resume, When it fails, we must use clk_disable_unprepare()
to free resource that have been used.
Fixes: 6f83d20838 ("drm/exynos: use DRM_DEV_ERROR to print out error
message")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jian Zhang <zhangjian210@huawei.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9974d37ea7 ]
In sk_psock_skb_ingress_enqueue function, if the linear area + nr_frags +
frag_list of the SKB has NR_MSG_FRAG_IDS blocks in total, skb_to_sgvec
will return NR_MSG_FRAG_IDS, then msg->sg.end will be set to
NR_MSG_FRAG_IDS, and in addition, (NR_MSG_FRAG_IDS - 1) is set to the last
SG of msg. Recv the msg in sk_msg_recvmsg, when i is (NR_MSG_FRAG_IDS - 1),
the sk_msg_iter_var_next(i) will change i to 0 (not NR_MSG_FRAG_IDS), the
judgment condition "msg_rx->sg.start==msg_rx->sg.end" and
"i != msg_rx->sg.end" can not work.
As a result, the processed msg cannot be deleted from ingress_msg list.
But the length of all the sge of the msg has changed to 0. Then the next
recvmsg syscall will process the msg repeatedly, because the length of sge
is 0, the -EFAULT error is always returned.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220628123616.186950-1-liujian56@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3bd53ea02d ]
We should use of_node_put() for the reference 'np' returned by
of_get_child_by_name() which will increase the refcount.
Fixes: 22b980badc ("mt76: add functions for parsing rate power limits from DT")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a14c1d011 ]
We should use of_node_put() for the reference 'np' returned by
of_get_child_by_name() which will increase the refcount.
Fixes: 17f1de56df ("mt76: add common code shared between multiple chipsets")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aac86cebb4 ]
For some reason, mt7615 reacts badly to repeatedly enabling/disabling the radar
detector without also switching the channel.
This results in very bad throughput on DFS channels, because
hw->conf.radar_enabled can get toggled a few times after CAC ends.
Fix this by always leaving the DFS detector enabled on DFS channels and instead
suppress unwanted detection events.
Fixes: 2c86f67520 ("mt76: mt7615: fix/rewrite the dfs state handling logic")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e744cfeee ]
Fix the issue that the measured inter packet gap didn't fit its
setting value.
Fixes: c2d3b1926f ("mt76: mt7915: add support for ipg in testmode")
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 182071cdd5 ]
mac_write_txwi code is shared between connac2 devices (mt7915 and
mt7921). Move it in connac module.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 90211957a6 ]
This is a preliminary patch to share connac2 mac txwi code.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d502e30020 ]
This is a preliminary patch to share txwi configuration code.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e00b3e407e ]
This is a preliminary patch to share txwi configuration code.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31f3248a75 ]
Enlarge maximum MPDU length to 11454 that both mt7921/mt7922 can support.
After this fixing, we can get better performance.
Fixes: 5c14a5f944 ("mt76: mt7921: introduce mt7921e support")
Tested-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4a92547fb ]
Do not update pm stats if mt7921e_mcu_fw_pmctrl routine returns an
error.
Fixes: 36873246f7 ("mt76: mt7921: add awake and doze time accounting")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79717c4eee ]
Do not update pm stats if mt7615_mcu_fw_pmctrl returns an error.
Fixes: abe912ae3c ("mt76: mt7663: add awake and doze time accounting")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0a9123ef5 ]
To add MLD, reuse the bss_conf structure later for per-link
information, so move some things into it that are per link.
Most transformations were done with the following spatch:
@@
expression sdata;
identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color };
@@
-sdata->vif.var
+sdata->vif.bss_conf.var
@@
struct ieee80211_vif *vif;
identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color };
@@
-vif->var
+vif->bss_conf.var
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vincent Mailhol