Simplify afs_cell record handling to avoid very occasional races that cause
module removal to hang (it waits for all cell records to be removed).
There are two things that particularly contribute to the difficulty:
firstly, the code tries to pass a ref on the cell to the cell's maintenance
work item (which gets awkward if the work item is already queued); and,
secondly, there's an overall cell manager that tries to use just one timer
for the entire cell collection (to avoid having loads of timers). However,
both of these are probably unnecessarily restrictive.
To simplify this, the following changes are made:
(1) The cell record collection manager is removed. Each cell record
manages itself individually.
(2) Each afs_cell is given a second work item (cell->destroyer) that is
queued when its refcount reaches zero. This is not done in the
context of the putting thread as it might be in an inconvenient place
to sleep.
(3) Each afs_cell is given its own timer. The timer is used to expire the
cell record after a period of unuse if not otherwise pinned and can
also be used for other maintenance tasks if necessary (of which there
are currently none as DNS refresh is triggered by filesystem
operations).
(4) The afs_cell manager work item (cell->manager) is no longer given a
ref on the cell when queued; rather, the manager must be deleted.
This does away with the need to deal with the consequences of losing a
race to queue cell->manager. Clean up of extra queuing is deferred to
the destroyer.
(5) The cell destroyer work item makes sure the cell timer is removed and
that the normal cell work is cancelled before farming the actual
destruction off to RCU.
(6) When a network namespace is destroyed or the kafs module is unloaded,
it's now a simple matter of marking the namespace as dead then just
waking up all the cell work items. They will then remove and destroy
themselves once all remaining activity counts and/or a ref counts are
dropped. This makes sure that all server records are dropped first.
(7) The cell record state set is reduced to just four states: SETTING_UP,
ACTIVE, REMOVING and DEAD. The record persists in the active state
even when it's not being used until the time comes to remove it rather
than downgrading it to an inactive state from whence it can be
restored.
This means that the cell still appears in /proc and /afs when not in
use until it switches to the REMOVING state - at which point it is
removed.
Note that the REMOVING state is included so that someone wanting to
resurrect the cell record is forced to wait whilst the cell is torn
down in that state. Once it's in the DEAD state, it has been removed
from net->cells tree and is no longer findable and can be replaced.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20250224234154.2014840-16-dhowells@redhat.com/ # v1
Link: https://lore.kernel.org/r/20250310094206.801057-12-dhowells@redhat.com/ # v4
The current way that afs_server refs are accounted and cleaned up sometimes
cause rmmod to hang when it is waiting for cell records to be removed. The
problem is that the cell cleanup might occasionally happen before the
server cleanup and then there's nothing that causes the cell to
garbage-collect the remaining servers as they become inactive.
Partially fix this by:
(1) Give each afs_server record its own management timer that rather than
relying on the cell manager's central timer to drive each individual
cell's maintenance work item to garbage collect servers.
This timer is set when afs_unuse_server() reduces a server's activity
count to zero and will schedule the server's destroyer work item upon
firing.
(2) Give each afs_server record its own destroyer work item that removes
the record from the cell's database, shuts down the timer, cancels any
pending work for itself, sends an RPC to the server to cancel
outstanding callbacks.
This change, in combination with the timer, obviates the need to try
and coordinate so closely between the cell record and a bunch of other
server records to try and tear everything down in a coordinated
fashion. With this, the cell record is pinned until the server RCU is
complete and namespace/module removal will wait until all the cell
records are removed.
(3) Now that incoming calls are mapped to servers (and thus cells) using
data attached to an rxrpc_peer, the UUID-to-server mapping tree is
moved from the namespace to the cell (cell->fs_servers). This means
there can no longer be duplicates therein - and that allows the
mapping tree to be simpler as there doesn't need to be a chain of
same-UUID servers that are in different cells.
(4) The lock protecting the UUID mapping tree is switched to an
rw_semaphore on the cell rather than a seqlock on the namespace as
it's now only used during mounting in contexts in which we're allowed
to sleep.
(5) When it comes time for a cell that is being removed to purge its set
of servers, it just needs to iterate over them and wake them up. Once
a server becomes inactive, its destroyer work item will observe the
state of the cell and immediately remove that record.
(6) When a server record is removed, it is marked AFS_SERVER_FL_EXPIRED to
prevent reattempts at removal. The record will be dispatched to RCU
for destruction once its refcount reaches 0.
(7) The AFS_SERVER_FL_UNCREATED/CREATING flags are used to synchronise
simultaneous creation attempts. If one attempt fails, it will abandon
the attempt and allow another to try again.
Note that the record can't just be abandoned when dead as it's bound
into a server list attached to a volume and only subject to
replacement if the server list obtained for the volume from the VLDB
changes.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20250224234154.2014840-15-dhowells@redhat.com/ # v1
Link: https://lore.kernel.org/r/20250310094206.801057-11-dhowells@redhat.com/ # v4
Change the AFS dynamic root to do things differently:
(1) Rather than having the creation of cell records create inodes and
dentries for cell mountpoints, create them on demand during lookup.
This simplifies cell management and locking as we no longer have to
create these objects in advance *and* on speculative lookup by the
user for a cell that isn't precreated.
(2) Rather than using the libfs dentry-based readdir (the dentries now no
longer exist until accessed from (1)), have readdir generate the
contents by reading the list of cells. The @cell symlinks get pushed
in positions 2 and 3 if rootcell has been configured.
(3) Make the @cell symlink dentries persist for the life of the superblock
or until reclaimed, but make cell mountpoints disappear immediately if
unused.
It's not perfect as someone doing an "ls -l /afs" may create a whole
bunch of dentries which will be garbage collected immediately. But
any dentry that gets automounted will be pinned by the mount, so it
shouldn't be too bad.
(4) Allocate the inode numbers for the cell mountpoints from an IDR to
prevent duplicates appearing in the event it cycles round. The number
allocated from the IDR is doubled to provide two inode numbers - one
for the normal cell name (RO) and one for the dotted cell name (RW).
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1
Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
The ->get_link() method may be entered under RCU pathwalk conditions (in
which case, the dentry pointer is NULL). This is not taken account of by
afs_atcell_get_link() and lockdep will complain when it tries to lock an
rwsem.
Fix this by marking net->ws_cell as __rcu and using RCU access macros on it
and by making afs_atcell_get_link() just return a pointer to the name in
RCU pathwalk without taking net->cells_lock or a ref on the cell as RCU
will protect the name storage (the cell is already freed via call_rcu()).
Fixes: 30bca65bbb ("afs: Make /afs/@cell and /afs/.@cell symlinks")
Reported-by: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20250310094206.801057-2-dhowells@redhat.com/ # v4
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth.
We didn't get netfilter or wireless PRs this week, so next week's PR
is probably going to be bigger. A healthy dose of fixes for bugs
introduced in the current release nonetheless.
Current release - regressions:
- Bluetooth: always allow SCO packets for user channel
- af_unix: fix memory leak in unix_dgram_sendmsg()
- rxrpc:
- remove redundant peer->mtu_lock causing lockdep splats
- fix spinlock flavor issues with the peer record hash
- eth: iavf: fix circular lock dependency with netdev_lock
- net: use rtnl_net_dev_lock() in
register_netdevice_notifier_dev_net() RDMA driver register notifier
after the device
Current release - new code bugs:
- ethtool: fix ioctl confusing drivers about desired HDS user config
- eth: ixgbe: fix media cage present detection for E610 device
Previous releases - regressions:
- loopback: avoid sending IP packets without an Ethernet header
- mptcp: reset connection when MPTCP opts are dropped after join
Previous releases - always broken:
- net: better track kernel sockets lifetime
- ipv6: fix dst ref loop on input in seg6 and rpl lw tunnels
- phy: qca807x: use right value from DTS for DAC_DSP_BIAS_CURRENT
- eth: enetc: number of error handling fixes
- dsa: rtl8366rb: reshuffle the code to fix config / build issue with
LED support"
* tag 'net-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
net: ti: icss-iep: Reject perout generation request
idpf: fix checksums set in idpf_rx_rsc()
selftests: drv-net: Check if combined-count exists
net: ipv6: fix dst ref loop on input in rpl lwt
net: ipv6: fix dst ref loop on input in seg6 lwt
usbnet: gl620a: fix endpoint checking in genelink_bind()
net/mlx5: IRQ, Fix null string in debug print
net/mlx5: Restore missing trace event when enabling vport QoS
net/mlx5: Fix vport QoS cleanup on error
net: mvpp2: cls: Fixed Non IP flow, with vlan tag flow defination.
af_unix: Fix memory leak in unix_dgram_sendmsg()
net: Handle napi_schedule() calls from non-interrupt
net: Clear old fragment checksum value in napi_reuse_skb
gve: unlink old napi when stopping a queue using queue API
net: Use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net().
tcp: Defer ts_recent changes until req is owned
net: enetc: fix the off-by-one issue in enetc_map_tx_tso_buffs()
net: enetc: remove the mm_lock from the ENETC v4 driver
net: enetc: add missing enetc4_link_deinit()
net: enetc: update UDP checksum when updating originTimestamp field
...
Pull sound fixes from Takashi Iwai:
"A collection of fixes. The only slightly large change is for ASoC
Cirrus codec, but that's still in a normal range. All the rest are
small device-specific fixes and should be fairly safe to take"
* tag 'sound-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Fix microphone regression on ASUS N705UD
ALSA: hda/realtek: Fix wrong mic setup for ASUS VivoBook 15
ASoC: cs35l56: Prevent races when soft-resetting using SPI control
firmware: cs_dsp: Remove async regmap writes
ASoC: Intel: sof_sdw: warn both sdw and pch dmic are used
ASoC: SOF: Intel: don't check number of sdw links when set dmic_fixup
ASoC: dapm-graph: set fill colour of turned on nodes
ASoC: fsl: Rename stream name of SAI DAI driver
ASoC: es8328: fix route from DAC to output
ALSA: usb-audio: Re-add sample rate quirk for Pioneer DJM-900NXS2
ASoC: tas2764: Set the SDOUT polarity correctly
ASoC: tas2764: Fix power control mask
ALSA: usb-audio: Avoid dropping MIDI events at closing multiple ports
ASoC: tas2770: Fix volume scale
IEP driver supports both perout and pps signal generation
but perout feature is faulty with half-cooked support
due to some missing configuration. Remove perout
support from the driver and reject perout requests with
"not supported" error code.
Fixes: c1e0230eea ("net: ti: icss-iep: Add IEP driver")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250227092441.1848419-1-m-malladi@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some drivers, like tg3, do not set combined-count:
$ ethtool -l enp4s0f1
Channel parameters for enp4s0f1:
Pre-set maximums:
RX: 4
TX: 4
Other: n/a
Combined: n/a
Current hardware settings:
RX: 4
TX: 1
Other: n/a
Combined: n/a
In the case where combined-count is not set, the ethtool netlink code
in the kernel elides the value and the code in the test:
netnl.channels_get(...)
With a tg3 device, the returned dictionary looks like:
{'header': {'dev-index': 3, 'dev-name': 'enp4s0f1'},
'rx-max': 4,
'rx-count': 4,
'tx-max': 4,
'tx-count': 1}
Note that the key 'combined-count' is missing. As a result of this
missing key the test raises an exception:
# Exception| if channels['combined-count'] == 0:
# Exception| ~~~~~~~~^^^^^^^^^^^^^^^^^^
# Exception| KeyError: 'combined-count'
Change the test to check if 'combined-count' is a key in the dictionary
first and if not assume that this means the driver has separate RX and
TX queues.
With this change, the test now passes successfully on tg3 and mlx5
(which does have a 'combined-count').
Fixes: 1cf2704242 ("net: selftest: add test for netdev netlink queue-get API")
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250226181957.212189-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After running the 'sendmsg02' program of Linux Test Project (LTP),
kmemleak reports the following memory leak:
# cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff888243866800 (size 2048):
comm "sendmsg02", pid 67, jiffies 4294903166
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 5e 00 00 00 00 00 00 00 ........^.......
01 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............
backtrace (crc 7e96a3f2):
kmemleak_alloc+0x56/0x90
kmem_cache_alloc_noprof+0x209/0x450
sk_prot_alloc.constprop.0+0x60/0x160
sk_alloc+0x32/0xc0
unix_create1+0x67/0x2b0
unix_create+0x47/0xa0
__sock_create+0x12e/0x200
__sys_socket+0x6d/0x100
__x64_sys_socket+0x1b/0x30
x64_sys_call+0x7e1/0x2140
do_syscall_64+0x54/0x110
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Commit 689c398885 ("af_unix: Defer sock_put() to clean up path in
unix_dgram_sendmsg().") defers sock_put() in the error handling path.
However, it fails to account for the condition 'msg->msg_namelen != 0',
resulting in a memory leak when the code jumps to the 'lookup' label.
Fix issue by calling sock_put() if 'msg->msg_namelen != 0' is met.
Fixes: 689c398885 ("af_unix: Defer sock_put() to clean up path in unix_dgram_sendmsg().")
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Acked-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250225021457.1824-1-ahuang12@lenovo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
napi_schedule() is expected to be called either:
* From an interrupt, where raised softirqs are handled on IRQ exit
* From a softirq disabled section, where raised softirqs are handled on
the next call to local_bh_enable().
* From a softirq handler, where raised softirqs are handled on the next
round in do_softirq(), or further deferred to a dedicated kthread.
Other bare tasks context may end up ignoring the raised NET_RX vector
until the next random softirq handling opportunity, which may not
happen before a while if the CPU goes idle afterwards with the tick
stopped.
Such "misuses" have been detected on several places thanks to messages
of the kind:
"NOHZ tick-stop error: local softirq work is pending, handler #08!!!"
For example:
__raise_softirq_irqoff
__napi_schedule
rtl8152_runtime_resume.isra.0
rtl8152_resume
usb_resume_interface.isra.0
usb_resume_both
__rpm_callback
rpm_callback
rpm_resume
__pm_runtime_resume
usb_autoresume_device
usb_remote_wakeup
hub_event
process_one_work
worker_thread
kthread
ret_from_fork
ret_from_fork_asm
And also:
* drivers/net/usb/r8152.c::rtl_work_func_t
* drivers/net/netdevsim/netdev.c::nsim_start_xmit
There is a long history of issues of this kind:
019edd01d1 ("ath10k: sdio: Add missing BH locking around napi_schdule()")
3300685893 ("idpf: disable local BH when scheduling napi for marker packets")
e3d5d70cb4 ("net: lan78xx: fix "softirq work is pending" error")
e55c27ed9c ("mt76: mt7615: add missing bh-disable around rx napi schedule")
c0182aa985 ("mt76: mt7915: add missing bh-disable around tx napi enable/schedule")
970be1dff2 ("mt76: disable BH around napi_schedule() calls")
019edd01d1 ("ath10k: sdio: Add missing BH locking around napi_schdule()")
30bfec4fec ("can: rx-offload: can_rx_offload_threaded_irq_finish(): add new function to be called from threaded interrupt")
e63052a5dd ("mlx5e: add add missing BH locking around napi_schdule()")
83a0c6e589 ("i40e: Invoke softirqs after napi_reschedule")
bd4ce941c8 ("mlx4: Invoke softirqs after napi_reschedule")
8cf699ec84 ("mlx4: do not call napi_schedule() without care")
ec13ee8014 ("virtio_net: invoke softirqs after __napi_schedule")
This shows that relying on the caller to arrange a proper context for
the softirqs to be handled while calling napi_schedule() is very fragile
and error prone. Also fixing them can also prove challenging if the
caller may be called from different kinds of contexts.
Therefore fix this from napi_schedule() itself with waking up ksoftirqd
when softirqs are raised from task contexts.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Reported-by: Francois Romieu <romieu@fr.zoreil.com>
Closes: https://lore.kernel.org/lkml/354a2690-9bbf-4ccb-8769-fa94707a9340@molgen.mpg.de/
Cc: Breno Leitao <leitao@debian.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250223221708.27130-1-frederic@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In certain cases, napi_get_frags() returns an skb that points to an old
received fragment, This skb may have its skb->ip_summed, csum, and other
fields set from previous fragment handling.
Some network drivers set skb->ip_summed to either CHECKSUM_COMPLETE or
CHECKSUM_UNNECESSARY when getting skb from napi_get_frags(), while
others only set skb->ip_summed when RX checksum offload is enabled on
the device, and do not set any value for skb->ip_summed when hardware
checksum offload is disabled, assuming that the skb->ip_summed
initiated to zero by napi_reuse_skb, ionic driver for example will
ignore/unset any value for the ip_summed filed if HW checksum offload is
disabled, and if we have a situation where the user disables the
checksum offload during a traffic that could lead to the following
errors shown in the kernel logs:
<IRQ>
dump_stack_lvl+0x34/0x48
__skb_gro_checksum_complete+0x7e/0x90
tcp6_gro_receive+0xc6/0x190
ipv6_gro_receive+0x1ec/0x430
dev_gro_receive+0x188/0x360
? ionic_rx_clean+0x25a/0x460 [ionic]
napi_gro_frags+0x13c/0x300
? __pfx_ionic_rx_service+0x10/0x10 [ionic]
ionic_rx_service+0x67/0x80 [ionic]
ionic_cq_service+0x58/0x90 [ionic]
ionic_txrx_napi+0x64/0x1b0 [ionic]
__napi_poll+0x27/0x170
net_rx_action+0x29c/0x370
handle_softirqs+0xce/0x270
__irq_exit_rcu+0xa3/0xc0
common_interrupt+0x80/0xa0
</IRQ>
This inconsistency sometimes leads to checksum validation issues in the
upper layers of the network stack.
To resolve this, this patch clears the skb->ip_summed value for each
reused skb in by napi_reuse_skb(), ensuring that the caller is responsible
for setting the correct checksum status. This eliminates potential
checksum validation issues caused by improper handling of
skb->ip_summed.
Fixes: 76620aafd6 ("gro: New frags interface to avoid copying shinfo")
Signed-off-by: Mohammad Heib <mheib@redhat.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250225112852.2507709-1-mheib@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull bcachefs fixes from Kent Overstreet:
"A couple small ones, the main user visible changes/fixes are:
- Fix a bug where truncate would rarely fail and return 1
- Revert the directory i_size code: this turned out to have a number
of issues that weren't noticed because the fsck code wasn't
correctly reporting errors (ouch), and we're late enough in the
cycle that it can just wait until 6.15"
* tag 'bcachefs-2025-02-26' of git://evilpiepirate.org/bcachefs:
bcachefs: Fix truncate sometimes failing and returning 1
bcachefs: Fix deadlock
bcachefs: Check for -BCH_ERR_open_buckets_empty in journal resize
bcachefs: Revert directory i_size
bcachefs: fix bch2_extent_ptr_eq()
bcachefs: Fix memmove when move keys down
bcachefs: print op->nonce on data update inconsistency
__bch_truncate_folio() may return 1 to indicate dirtyness of the folio
being truncated, needed for fpunch to get the i_size writes correct.
But truncate was forgetting to clear ret, and sometimes returning it as
an error.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This turned out to have several bugs, which were missed because the fsck
code wasn't properly reporting errors - whoops.
Kicking it out for now, hopefully it can make 6.15.
Cc: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Pull SCSI fixes from James Bottomley:
"Small ufs fixes and a core change to clear the command private area on
every retry (which fixes a reported bug in virtio_scsi)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: bsg: Fix crash when arpmb command fails
scsi: ufs: core: Set default runtime/system PM levels before ufshcd_hba_init()
scsi: core: Clear driver private data when retrying request
scsi: ufs: core: Fix ufshcd_is_ufs_dev_busy() and ufshcd_eh_timed_out()
Pull workqueue update from Tejun Heo:
"This contains a patch improve debug visibility.
While it isn't a fix, the change carries virtually no risk and makes
it substantially easier to chase down a class of problems"
* tag 'wq-for-6.14-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Log additional details when rejecting work
Pull sched_ext fix from Tejun Heo:
"pick_task_scx() has a workaround to avoid stalling when the fair
class's balance() says yes but pick_task() says no.
The workaround was incorrectly deciding to keep the prev taks running
if the task is on SCX even when the task is in a sleeping state, which
can lead to several confusing failure modes.
Fix it by testing the prev task is currently queued on SCX instead"
* tag 'sched_ext-for-6.14-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Fix pick_task_scx() picking non-queued tasks when it's called without balance()
Pull NFS client fixes from Anna Schumaker:
"Stable Fixes:
- O_DIRECT writes should adjust file length
Other Bugfixes:
- Adjust delegated timestamps for O_DIRECT reads and writes
- Prevent looping due to rpc_signal_task() races
- Fix a deadlock when recovering state on a sillyrenamed file
- Properly handle -ETIMEDOUT errors from tlshd
- Suppress build warnings for unused procfs functions
- Fix memory leak of lsm_contexts"
* tag 'nfs-for-6.14-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
lsm,nfs: fix memory leak of lsm_context
sunrpc: suppress warnings for unused procfs functions
SUNRPC: Handle -ETIMEDOUT return from tlshd
NFSv4: Fix a deadlock when recovering state on a sillyrenamed file
SUNRPC: Prevent looping due to rpc_signal_task() races
NFS: Adjust delegated timestamps for O_DIRECT reads and writes
NFS: O_DIRECT writes must check and adjust the file length
Pull landlock fixes from Mickaël Salaün:
"Fixes to TCP socket identification, documentation, and tests"
* tag 'landlock-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add binaries to .gitignore
selftests/landlock: Test that MPTCP actions are not restricted
selftests/landlock: Test TCP accesses with protocol=IPPROTO_TCP
landlock: Fix non-TCP sockets restriction
landlock: Minor typo and grammar fixes in IPC scoping documentation
landlock: Fix grammar error
selftests/landlock: Enable the new CONFIG_AF_UNIX_OOB
Pull integrity fixes from Mimi Zohar:
"One bugfix and one spelling cleanup. The bug fix restores a
performance improvement"
* tag 'integrity-v6.14-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Reset IMA_NONACTION_RULE_FLAGS after post_setattr
integrity: fix typos and spelling errors
This fixes a regression introduced a few weeks ago in stable kernels
6.12.14 and 6.13.3. The internal microphone on ASUS Vivobook N705UD /
X705UD laptops is broken: the microphone appears in userspace (e.g.
Gnome settings) but no sound is detected.
I bisected it to commit 3b4309546b ("ALSA: hda: Fix headset detection
failure due to unstable sort").
I figured out the cause:
1. The initial pins enabled for the ALC256 driver are:
cfg->inputs == {
{ pin=0x19, type=AUTO_PIN_MIC,
is_headset_mic=1, is_headphone_mic=0, has_boost_on_pin=1 },
{ pin=0x1a, type=AUTO_PIN_MIC,
is_headset_mic=0, is_headphone_mic=0, has_boost_on_pin=1 } }
2. Since 2017 and commits c1732ede5e ("ALSA: hda/realtek - Fix headset
and mic on several ASUS laptops with ALC256") and 28e8af8a16 ("ALSA:
hda/realtek: Fix mic and headset jack sense on ASUS X705UD"), the
quirk ALC256_FIXUP_ASUS_MIC is also applied to ASUS X705UD / N705UD
laptops.
This added another internal microphone on pin 0x13:
cfg->inputs == {
{ pin=0x13, type=AUTO_PIN_MIC,
is_headset_mic=0, is_headphone_mic=0, has_boost_on_pin=1 },
{ pin=0x19, type=AUTO_PIN_MIC,
is_headset_mic=1, is_headphone_mic=0, has_boost_on_pin=1 },
{ pin=0x1a, type=AUTO_PIN_MIC,
is_headset_mic=0, is_headphone_mic=0, has_boost_on_pin=1 } }
I don't know what this pin 0x13 corresponds to. To the best of my
knowledge, these laptops have only one internal microphone.
3. Before 2025 and commit 3b4309546b ("ALSA: hda: Fix headset
detection failure due to unstable sort"), the sort function would let
the microphone of pin 0x1a (the working one) *before* the microphone
of pin 0x13 (the phantom one).
4. After this commit 3b4309546b, the fixed sort function puts the
working microphone (pin 0x1a) *after* the phantom one (pin 0x13). As
a result, no sound is detected anymore.
It looks like the quirk ALC256_FIXUP_ASUS_MIC is not needed anymore for
ASUS Vivobook X705UD / N705UD laptops. Without it, everything works
fine:
- the internal microphone is detected and records actual sound,
- plugging in a jack headset is detected and can record actual sound
with it,
- unplugging the jack headset makes the system go back to internal
microphone and can record actual sound.
Cc: stable@vger.kernel.org
Cc: Kuan-Wei Chiu <visitorckw@gmail.com>
Cc: Chris Chiu <chris.chiu@canonical.com>
Fixes: 3b4309546b ("ALSA: hda: Fix headset detection failure due to unstable sort")
Tested-by: Adrien Vergé <adrienverge@gmail.com>
Signed-off-by: Adrien Vergé <adrienverge@gmail.com>
Link: https://patch.msgid.link/20250226135515.24219-1-adrienverge@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Recently a bug was discovered where the server had entered TCP_ESTABLISHED
state, but the upper layers were not notified.
The same 5-tuple packet may be processed by different CPUSs, so two
CPUs may receive different ack packets at the same time when the
state is TCP_NEW_SYN_RECV.
In that case, req->ts_recent in tcp_check_req may be changed concurrently,
which will probably cause the newsk's ts_recent to be incorrectly large.
So that tcp_validate_incoming will fail. At this point, newsk will not be
able to enter the TCP_ESTABLISHED.
cpu1 cpu2
tcp_check_req
tcp_check_req
req->ts_recent = rcv_tsval = t1
req->ts_recent = rcv_tsval = t2
syn_recv_sock
tcp_sk(child)->rx_opt.ts_recent = req->ts_recent = t2 // t1 < t2
tcp_child_process
tcp_rcv_state_process
tcp_validate_incoming
tcp_paws_check
if ((s32)(rx_opt->ts_recent - rx_opt->rcv_tsval) <= paws_win)
// t2 - t1 > paws_win, failed
tcp_v4_do_rcv
tcp_rcv_state_process
// TCP_ESTABLISHED
The cpu2's skb or a newly received skb will call tcp_v4_do_rcv to get
the newsk into the TCP_ESTABLISHED state, but at this point it is no
longer possible to notify the upper layer application. A notification
mechanism could be added here, but the fix is more complex, so the
current fix is used.
In tcp_check_req, req->ts_recent is used to assign a value to
tcp_sk(child)->rx_opt.ts_recent, so removing the change in req->ts_recent
and changing tcp_sk(child)->rx_opt.ts_recent directly after owning the
req fixes this bug.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull powerpc fix from Madhavan Srinivasan:
- Fix for cross-reference in documentation and deprecation warning
Thanks to Andrew Donnellan and Bagas Sanjaya.
* tag 'powerpc-6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
cxl: Fix cross-reference in documentation and add deprecation warning
There is an issue with one-step timestamp based on UDP/IP. The peer will
discard the sync packet because of the wrong UDP checksum. For ENETC v1,
the software needs to update the UDP checksum when updating the
originTimestamp field, so that the hardware can correctly update the UDP
checksum when updating the correction field. Otherwise, the UDP checksum
in the sync packet will be wrong.
Fixes: 7294380c52 ("enetc: support PTP Sync packet one-step timestamping")
Cc: stable@vger.kernel.org
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250224111251.1061098-6-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Howells