The only purpose of i8k_ioctl() is to call i8k_ioctl_unlocked()
with i8k_mutex held. Judging from the hwmon code, this mutex
only needs to be held when setting the fan speed/mode, so
the operation of I8K_SET_FAN is guaranteed to be atomic.
Unify both functions and reduce the locking of i8k_mutex
to I8K_SET_FAN.
Tested on a Dell Inspiron 3505.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20211211155422.16830-3-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The second switch-case has no real purpose:
- for I8K_BIOS_VERSION, val does not represent a return value,
making the check for error values unnecessary.
- for I8K_MACHINE_ID, val remains zero, so the error check is
unnecessary too.
Remove the switch-case and move the calls to copy_to_user()
into the first switch-case for I8K_BIOS_VERSION/_MACHINE_ID.
Omit buff[] since data->bios_machineid already contains the string
with the necessary zero padding through devm_kzalloc().
Tested on a Dell Inspiron 3505.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20211211155422.16830-2-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This switches to retrieveing the configuration of the NTC
from generic firmware properties so that we get neutral from
device tree: now ACPI or, more importantly, software nodes
can be used to spawn NTC devices provided they have the
required properties.
This was inspired by the similar changes made to the IIO
drivers.
This was tested on the Ux500 HREF with the NTC devices
probing from device tree just as fine after this as before.
Cc: Peter Rosin <peda@axentia.se>
Cc: Chris Lesiak <chris.lesiak@licor.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211206020423.62402-2-linus.walleij@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Variable range is being initialized with a value that is never read, it
is being re-assigned in the next statement. The assignment is redundant,
remove it and initialize range using the second assigned value. Clean up
the formatting too by adding missing spaces.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20211204233155.55454-1-colin.i.king@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Smatch detects this array overflow:
drivers/hwmon/asus_wmi_sensors.c:569 asus_wmi_configure_sensor_setup()
error: buffer overflow 'hwmon_attributes' 8 <= 9
The hwmon_attributes[] array should have "hwmon_max" so that it gets
larger when more attributes are added.
Fixes: 9d07e54a25b8 ("hwmon: (asus_wmi_sensors) Support X370 Asus WMI.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211130105117.GH5827@kili
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Smatch detected an array out of bounds error:
drivers/hwmon/asus_wmi_ec_sensors.c:562 asus_wmi_ec_configure_sensor_setup()
error: buffer overflow 'hwmon_attributes' 8 <= 9
The hwmon_attributes[] array needs to be declared with "hwmon_max"
elements.
Fixes: c04c7f7bfcbe ("hwmon: (asus_wmi_ec_sensors) Support B550 Asus WMI.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211130105034.GG5827@kili
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The only possible assignment of a function to get a voltage to
convert to a resistance is to use the internal function
ntc_adc_iio_read() which is only available when using IIO
and OF.
Bite the bullet and mandate OF and IIO, drop the read_uv()
callback abstraction and some ifdefs.
As no board is using the platform data, all users are using
OF and IIO anyway.
Cc: Peter Rosin <peda@axentia.se>
Cc: Chris Lesiak <chris.lesiak@licor.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211125020841.3616359-4-linus.walleij@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Platform data is supposed to be used with "board files",
device descriptions in C. Since the introduction of the
NTC driver in 2011, no such platforms have been submitted
to the Linux kernel, and their use is strongly discouraged
in favor of Device Tree, ACPI or as last resort software
firmware nodes.
Drop the external header and copy the platform data into
the driver file.
Cc: Peter Rosin <peda@axentia.se>
Cc: Chris Lesiak <chris.lesiak@licor.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211125020841.3616359-2-linus.walleij@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Linux HWMON sensors driver for ASUS motherboards to read
sensors from the embedded controller.
Many ASUS motherboards do not publish all the available
sensors via the Super I/O chip but the missing ones are
available through the embedded controller (EC) registers.
This driver implements reading those sensor data via the
WMI method BREC, which is known to be present in all ASUS
motherboards based on the AMD 500 series chipsets (and
probably is available in other models too). The driver
needs to know exact register addresses for the sensors and
thus support for each motherboard has to be added explicitly.
The EC registers do not provide critical values for the
sensors and as such they are not published to the HWMON.
Supported motherboards:
* PRIME X570-PRO
* Pro WS X570-ACE
* ROG CROSSHAIR VIII HERO
* ROG CROSSHAIR VIII DARK HERO
* ROG CROSSHAIR VIII FORMULA
* ROG STRIX X570-E GAMING
* ROG STRIX B550-I GAMING
* ROG STRIX B550-E GAMING
Co-developed-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Denis Pauk <pauk.denis@gmail.com>
Tested-by: Tor Vic <torvic9@mailbox.org>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The adm1021 driver is quite generous with its automatic chip detection
and easily misdetects several chips. Strengthen detection of MAX1617,
MAX1617A, and LM84 to make the driver less vulnerable to false matches.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Since we are using regmap access functions to write into chip registers,
we can hide the difference in register write addresses within regmap
code. By doing this we do not need to clear the regmap cache on register
writes, and the high level code does not need to bother about different
read/write register addresses.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use regmap for register accesses to be able to utilize its caching
functionality. This also lets us hide register access differences
in regmap code.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The new API is cleaner and reduces code size significantly.
All chip accesses are 'hidden' in chip access to prepare for using
regmap. Local caching code is removed, to be replaced by regmap based
caching in a follow-up patch.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The difference between TMP431 and other chips of this series is that the
TMP431 has an additional sensor. The register addresses for other sensors
are the same for all chips. It is therefore unnecessary to maintain two
different arrays for TMP431 and the other chips. Just use the same array
for all chips and add the TMP431 register addresses as third column.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Pull x86 fixes from Borislav Petkov:
- Prevent potential undefined behavior due to shifting pkey constants
into the sign bit
- Move the EFI memory reservation code *after* the efi= cmdline parsing
has happened
- Revert two commits which turned out to be the wrong direction to
chase when accommodating early memblock reservations consolidation
and command line parameters parsing
* tag 'x86_urgent_for_v5.16_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pkey: Fix undefined behaviour with PKRU_WD_BIT
x86/boot: Move EFI range reservation after cmdline parsing
Revert "x86/boot: Pull up cmdline preparation and early param parsing"
Revert "x86/boot: Mark prepare_command_line() __init"
Pull objtool fixes from Borislav Petkov:
- Prevent clang from reordering the reachable annotation in
an inline asm statement without inputs
- Fix objtool builds on non-glibc systems due to undefined
__always_inline
* tag 'objtool_urgent_for_v5.16_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
compiler.h: Fix annotation macro misplacement with Clang
uapi: Fix undefined __always_inline on non-glibc systems
Pull pin control fixes from Linus Walleij:
"Some hopefully final pin control fixes for the v5.16 kernel:
- Fix an out-of-bounds bug in the Mediatek driver
- Fix an init order bug in the Broadcom BCM2835 driver
- Fix a GPIO offset bug in the STM32 driver"
* tag 'pinctrl-v5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: stm32: consider the GPIO offset to expose all the GPIO lines
pinctrl: bcm2835: Change init order for gpio hogs
pinctrl: mediatek: fix global-out-of-bounds issue
Pull hwmon fixes from Guenter Roeck:
"A couple of lm90 driver fixes. None of them are critical, but they
should nevertheless be fixed"
* tag 'hwmon-for-v5.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (lm90) Do not report 'busy' status bit as alarm
hwmom: (lm90) Fix citical alarm status for MAX6680/MAX6681
hwmon: (lm90) Drop critical attribute support for MAX6654
hwmon: (lm90) Prevent integer overflow/underflow in hysteresis calculations
hwmon: (lm90) Fix usage of CONFIG2 register in detect function
Pull input fixes from Dmitry Torokhov:
"A few small updates to drivers.
Of note we are now deferring probes of i8042 on some Asus devices as
the controller is not ready to respond to queries first time around
when the driver is compiled into the kernel"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: elants_i2c - do not check Remark ID on eKTH3900/eKTH5312
Input: atmel_mxt_ts - fix double free in mxt_read_info_block
Input: goodix - fix memory leak in goodix_firmware_upload
Input: goodix - add id->model mapping for the "9111" model
Input: goodix - try not to touch the reset-pin on x86/ACPI devices
Input: i8042 - enable deferred probe quirk for ASUS UM325UA
Input: elantech - fix stack out of bound access in elantech_change_report_id()
Input: iqs626a - prohibit inlining of channel parsing functions
Input: i8042 - add deferred probe support
Merge misc fixes from Andrew Morton:
"9 patches.
Subsystems affected by this patch series: mm (kfence, mempolicy,
memory-failure, pagemap, pagealloc, damon, and memory-failure),
core-kernel, and MAINTAINERS"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/hwpoison: clear MF_COUNT_INCREASED before retrying get_any_page()
mm/damon/dbgfs: protect targets destructions with kdamond_lock
mm/page_alloc: fix __alloc_size attribute for alloc_pages_exact_nid
mm: delete unsafe BUG from page_cache_add_speculative()
mm, hwpoison: fix condition in free hugetlb page path
MAINTAINERS: mark more list instances as moderated
kernel/crash_core: suppress unknown crashkernel parameter warning
mm: mempolicy: fix THP allocations escaping mempolicy restrictions
kfence: fix memory leak when cat kfence objects
Hulk Robot reported a panic in put_page_testzero() when testing
madvise() with MADV_SOFT_OFFLINE. The BUG() is triggered when retrying
get_any_page(). This is because we keep MF_COUNT_INCREASED flag in
second try but the refcnt is not increased.
page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0)
------------[ cut here ]------------
kernel BUG at include/linux/mm.h:737!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 5 PID: 2135 Comm: sshd Tainted: G B 5.16.0-rc6-dirty #373
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: release_pages+0x53f/0x840
Call Trace:
free_pages_and_swap_cache+0x64/0x80
tlb_flush_mmu+0x6f/0x220
unmap_page_range+0xe6c/0x12c0
unmap_single_vma+0x90/0x170
unmap_vmas+0xc4/0x180
exit_mmap+0xde/0x3a0
mmput+0xa3/0x250
do_exit+0x564/0x1470
do_group_exit+0x3b/0x100
__do_sys_exit_group+0x13/0x20
__x64_sys_exit_group+0x16/0x20
do_syscall_64+0x34/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Modules linked in:
---[ end trace e99579b570fe0649 ]---
RIP: 0010:release_pages+0x53f/0x840
Link: https://lkml.kernel.org/r/20211221074908.3910286-1-liushixin2@huawei.com
Fixes: b94e02822d ("mm,hwpoison: try to narrow window race for free pages")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
DAMON debugfs interface iterates current monitoring targets in
'dbgfs_target_ids_read()' while holding the corresponding
'kdamond_lock'. However, it also destructs the monitoring targets in
'dbgfs_before_terminate()' without holding the lock. This can result in
a use_after_free bug. This commit avoids the race by protecting the
destruction with the corresponding 'kdamond_lock'.
Link: https://lkml.kernel.org/r/20211221094447.2241-1-sj@kernel.org
Reported-by: Sangwoo Bae <sangwoob@amazon.com>
Fixes: 4bc05954d0 ("mm/damon: implement a debugfs-based user space interface")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [5.15.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is not easily reproducible, but on 5.16-rc I have several times hit
the VM_BUG_ON_PAGE(PageTail(page), page) in
page_cache_add_speculative(): usually from filemap_get_read_batch() for
an ext4 read, yesterday from next_uptodate_page() from
filemap_map_pages() for a shmem fault.
That BUG used to be placed where page_ref_add_unless() had succeeded,
but now it is placed before folio_ref_add_unless() is attempted: that is
not safe, since it is only the acquired reference which makes the page
safe from racing THP collapse or split.
We could keep the BUG, checking PageTail only when
folio_ref_try_add_rcu() has succeeded; but I don't think it adds much
value - just delete it.
Link: https://lkml.kernel.org/r/8b98fc6f-3439-8614-c3f3-945c659a1aba@google.com
Fixes: 020853b6f5 ("mm: Add folio_try_get_rcu()")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a memory error hits a tail page of a free hugepage,
__page_handle_poison() is expected to be called to isolate the error in
4kB unit, but it's not called due to the outdated if-condition in
memory_failure_hugetlb(). This loses the chance to isolate the error in
the finer unit, so it's not optimal. Drop the condition.
This "(p != head && TestSetPageHWPoison(head)" condition is based on the
old semantics of PageHWPoison on hugepage (where PG_hwpoison flag was
set on the subpage), so it's not necessray any more. By getting to set
PG_hwpoison on head page for hugepages, concurrent error events on
different subpages in a single hugepage can be prevented by
TestSetPageHWPoison(head) at the beginning of memory_failure_hugetlb().
So dropping the condition should not reopen the race window originally
mentioned in commit b985194c8c ("hwpoison, hugetlb:
lock_page/unlock_page does not match for handling a free hugepage")
[naoya.horiguchi@linux.dev: fix "HardwareCorrupted" counter]
Link: https://lkml.kernel.org/r/20211220084851.GA1460264@u2004
Link: https://lkml.kernel.org/r/20211210110208.879740-1-naoya.horiguchi@linux.dev
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reported-by: Fei Luo <luofei@unicloud.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org> [5.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When booting with crashkernel= on the kernel command line a warning
similar to
Kernel command line: ro console=ttyS0 crashkernel=256M
Unknown kernel command line parameters "crashkernel=256M", will be passed to user space.
is printed.
This comes from crashkernel= being parsed independent from the kernel
parameter handling mechanism. So the code in init/main.c doesn't know
that crashkernel= is a valid kernel parameter and prints this incorrect
warning.
Suppress the warning by adding a dummy early_param handler for
crashkernel=.
Link: https://lkml.kernel.org/r/20211208133443.6867-1-prudo@redhat.com
Fixes: 86d1919a4f ("init: print out unknown kernel parameters")
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull ARM fixes from Russell King:
- fix nommu after getting rid of mini-stack for ARMv7
- fix Thumb2 bug in iWMMXt exception handling
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9169/1: entry: fix Thumb2 bug in iWMMXt exception handling
ARM: 9160/1: NOMMU: Reload __secondary_data after PROCINFO_INITFUNC
Linus Walleij