There is an implicit assumption in the driver that compression and
coh_1way+ are mutually exclusive. If this is ever not true then userptr
and imported dma-buf from external device will have uncleared ccs state.
Add a build bug for this so we don't forget.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828092257.169063-2-matthew.auld@intel.com
The node ptr can point to an already freed ptr, if we hit the path with
an already allocated node. We later dereference that pointer with:
xe_gt_assert(gt, !xe_ggtt_node_allocated(node));
which is a potential UAF. Fix this by not stashing the ptr for node.
Also since it is likely a bad idea to leave config->ggtt_region pointing
to a stale ptr, also set that to NULL by calling
pf_release_vf_config_ggtt() instead of pf_release_ggtt().
Fixes: 34e804220f69 ("drm/xe: Make xe_ggtt_node struct independent")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828104341.180111-2-matthew.auld@intel.com
Avoid using double space, ", " in function or macro parameters
where it's not required by any alignment purpose. Replace it with
a single space, ", ".
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823080643.2461992-1-nitin.r.gote@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Some VF accessible registers (like GuC scratch registers) must be
explicitly reset during the FLR. While this is today done by the GuC
firmware, according to the design, this should be responsibility of
the PF driver, as future platforms may require more registers to be
reset. Likewise GuC, the PF can access VFs registers by adding some
platform specific offset to the original register address.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240902192953.1792-1-michal.wajdeczko@intel.com
xe_bo_move() might be called in the TTM swapout path from validation
by another TTM device. If so, we are not likely to have a RPM
reference. So iff xe_pm_runtime_get() is safe to call from reclaim,
use it instead of xe_pm_runtime_get_noresume().
Strictly this is currently needed only if handle_system_ccs is true,
but use xe_pm_runtime_get() if possible anyway to increase test
coverage.
At the same time warn if handle_system_ccs is true and we can't
call xe_pm_runtime_get() from reclaim context. This will likely trip
if someone tries to enable SRIOV on LNL, without fixing Xe SRIOV
runtime resume / suspend.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240903094232.166342-1-thomas.hellstrom@linux.intel.com
Fix circular locking dependency on runtime suspend.
<4> [74.952215] ======================================================
<4> [74.952217] WARNING: possible circular locking dependency detected
<4> [74.952219] 6.10.0-rc7-xe #1 Not tainted
<4> [74.952221] ------------------------------------------------------
<4> [74.952223] kworker/7:1/82 is trying to acquire lock:
<4> [74.952226] ffff888120548488 (&dev->mode_config.mutex){+.+.}-{3:3}, at: drm_modeset_lock_all+0x40/0x1e0 [drm]
<4> [74.952260]
but task is already holding lock:
<4> [74.952262] ffffffffa0ae59c0 (xe_pm_runtime_lockdep_map){+.+.}-{0:0}, at: xe_pm_runtime_suspend+0x2f/0x340 [xe]
<4> [74.952322]
which lock already depends on the new lock.
The commit 'b1d90a86 ("drm/xe: Use the encoder suspend helper also used
by the i915 driver")' didn't do anything wrong. It actually fixed a
critical bug, because the encoder_suspend was never getting actually
called because it was returning if (has_display(xe)) instead of
if (!has_display(xe)). However, this ended up introducing the encoder
suspend calls in the runtime routines as well, causing the circular
locking dependency.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2304
Fixes: b1d90a862c89 ("drm/xe: Use the encoder suspend helper also used by the i915 driver")
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240830183507.298351-2-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Since commit 178c0a33c421 ("drm/print: Add generic drm dev printk
function") the output from drm_WARN() includes previously missing
the [drm] tag, so now xe_assert() is printing it twice:
[ ] xe 0000:00:02.0: [drm] [drm] Assertion `false` failed!
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240902190726.1748-1-michal.wajdeczko@intel.com
We are pushing threshold KLV to the GuC immediately during the
threshold provisioning, but those configs will be lost during a
GT reset. Include threshold KLVs while encoding full VF config
buffer to make sure the GuC receives all of the config KLVs.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240830132100.1704-2-michal.wajdeczko@intel.com
Testing on LNL has shown media GT's TLBs need to be invalidated via the
GuC, update PT code appropriately.
v2:
- Do dma_fence_get before first call of invalidation_fence_init (Himal)
- No need to check for valid chain fence (Himal)
v3:
- Use dma-fence-array
Fixes: 3330361543fc ("drm/xe/lnl: Add LNL platform definition")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826170144.2492062-3-matthew.brost@intel.com
Useful to preallocate dma fence array and then arm in path of reclaim or
a dma fence.
v2:
- s/arm/init (Christian)
- Drop !array warn (Christian)
v3:
- Fix kernel doc typos (dim)
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826170144.2492062-2-matthew.brost@intel.com
There's only one instance of hwmon per device, and MMIO access to it is
always done through the root tile. The code has been passing around a
pointer to the root tile's primary GT, which is confusing since this
isn't really a GT-level concept. Replace that pointer with an xe_device
pointer and use xe_root_mmio_gt(xe) to get a pointer when we need to do
register MMIO. This makes things easier to follow, and also cleans up
the code in preparation for a much larger MMIO register access overhaul
that's coming soon.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829220619.789159-6-matthew.d.roper@intel.com
There's only one instance of the pcode per tile, and for GT-related
accesses both the primary and media GT share the same register
interface. Since Xe was using per-GT locking, the pcode mutex wasn't
actually protecting everything that it should since concurrent accesses
related to a tile's primary GT and media GT were possible.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829220619.789159-5-matthew.d.roper@intel.com
Simplify memory unwinding on error also fixing current memory
leak that can happen on error.
v2: use devm_kcalloc(Matt A)
Fixes: 3338e4f90c14 ("drm/xe: Use topology to determine page fault queue size")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826162035.20462-1-nirmoy.das@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Our initial VF control implementation was focused on providing
a very minimal support for the VF_STATE_NOTIFY events just to
meet GuC requirements, without tracking a VF state or doing any
expected actions (like cleanup in case of the FLR notification).
Try to improve this by defining set of VF state machines, each
responsible for processing one activity (PAUSE, RESUME, STOP or
FLR). All required steps defined by the VF state machine are then
executed by the PF worker from the dedicated workqueue.
Any external requests or notifications simply try to transition
between the states to trigger a work and then wait for that work
to finish. Some predefined default timeouts are used to avoid
changing existing API calls, but it should be easy to extend the
control API to also accept specific timeout values.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828210809.1528-5-michal.wajdeczko@intel.com
It is unlikely that GuC will ever send a G2H notification with an
invalid VFID and it is currently harmless if that actually happen.
But in upcoming patches we will start using that VFID as an index
and we must be sure it is a valid to avoid a crash due to a buggy
firmware or a currupted G2H message.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828210809.1528-4-michal.wajdeczko@intel.com
Current formatting of "The VF FLR Flow with GuC" only looks fine,
but it will not render properly when included in htmldocs due to:
WARNING: Block quote ends without a blank line; unexpected unindent.
CRITICAL: Missing matching underline for section title overline.
Fix that by adding proper indent and using list markup.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828210809.1528-3-michal.wajdeczko@intel.com
On current platforms it is a PF driver responsibility to clear
some of the VF's resources during a VF FLR. Add simple function
that will clear configured VF resources (GGTT, LMEM). We will
start using this function soon.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828210809.1528-2-michal.wajdeczko@intel.com
Due to the special handling of the GSCCS in HW, we can't escalate to GT
reset when we receive the reset failure interrupt; the specs indicate
that we should trigger an FLR instead, but we do not have support for
that at the moment, so the HW will stay permanently in a broken state.
We should therefore mark the device as wedged, the same as if the GT
reset had failed.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828221457.2752868-1-daniele.ceraolospurio@intel.com
This is useful for debug, in case something goes wrong with the GSC. The
info includes the version information and the current value of the HECI1
status registers.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828215158.2743994-5-daniele.ceraolospurio@intel.com
The GSC compatibility version number is reset for each new platform. To
indicate this, the version includes a number that identifies the
platform (102 = MTL, 104 = LNL); this matches what happens for the
release version, where the major number also identifies a platform.
To make it clearer in our logs that the compatibility version is
specific to the platform, it is useful to include this platform number.
However, given that our binary names already include the platform, it is
not necessary to add this extra number there.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828215158.2743994-4-daniele.ceraolospurio@intel.com
We set the FW status to "TRANSFERRED" after the load completes and to
"RUNNING"once we're done with proxy init, so do the same if we're trying
to re-load the FW and it is already loaded.
Note that there is no difference in driver behavior between the 2
states, but it's useful to be accurate when we dump the status for
debug.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828215158.2743994-3-daniele.ceraolospurio@intel.com
The GSC HW is only reset by driver FLR or D3cold entry. We don't support
the former at runtime, while the latter is only supported on DGFX, for
which we don't support GSC. Therefore, if GSC failed to load previously
there is no need to try again because the HW is stuck in the error state.
An assert has been added so that if we ever add DGFX support we'll know
we need to handle the D3 case.
v2: use "< 0" instead of "!= 0" in the FW state error check (Julia).
Fixes: dd0e89e5edc2 ("drm/xe/gsc: GSC FW load")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828215158.2743994-2-daniele.ceraolospurio@intel.com
The kernel lrc is used solely by the execlist infra.
Move it to the execlist port struct and initialize it only when
execlists are used.
v2: Rebase, improve error handling readability (Jonathan)
Signed-off-by: Ilia Levi <ilia.levi@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826100655.1719060-1-ilia.levi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Battlemage platform is sufficiently tested and found stable. CI is also
pretty stable. Remove the force_probe requirement to enable the platform
support by default.
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828082152.3194814-1-balasubramani.vivekanandan@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Make sure that ggtt_node_remove() is invoked only if both node and ggtt
are not null. Move the null checks to the caller function
xe_ggtt_node_remove().
v2: Move null check below declarations (Tejas)
Fixes: 919bb54e989c ("drm/xe: Fix missing runtime outer protection for ggtt_remove_node")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828092229.3606503-1-himal.prasad.ghimiray@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
For non-d3cold-capable devices we'd like to be able to wake up the
device from reclaim. In particular, for Lunar Lake we'd like to be
able to blit CCS metadata to system at shrink time; at least from
kswapd where it's reasonable OK to wait for rpm resume and a
preceding rpm suspend.
Therefore use a separate lockdep map for such devices and prime it
reclaim-tainted.
v2:
- Rename lockmap acquire- and release functions. (Rodrigo Vivi).
- Reinstate the old xe_pm_runtime_lockdep_prime() function and
rename it to xe_rpm_might_enter_cb(). (Matthew Auld).
- Introduce a separate xe_pm_runtime_lockdep_prime function
called from module init for known required locking orders.
v3:
- Actually hook up the prime function at module init.
v4:
- Rebase.
v5:
- Don't use reclaim-safe RPM with sriov.
Cc: "Vivi, Rodrigo" <rodrigo.vivi@intel.com>
Cc: "Auld, Matthew" <matthew.auld@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826143450.92511-1-thomas.hellstrom@linux.intel.com
Remove TTM_TT_FLAG_CLEARED_ON_FREE now that XE stopped using this
flag.
This reverts commit decbfaf06db05fa1f9b33149ebb3c145b44e878f.
Cc: Christian König <christian.koenig@amd.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828083635.23601-2-nirmoy.das@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
This optimization relied on having to clear CCS on allocations.
If there is no need to clear CCS on allocations then this would mostly
help in reducing CPU utilization.
Revert this patch at this moment because of:
1 Currently Xe can't do clear on free and using a invalid ttm flag,
TTM_TT_FLAG_CLEARED_ON_FREE which could poison global ttm pool on
multi-device setup.
2 Also for LNL CPU:WB doesn't require clearing CCS as such BO will
not be allowed to bind with compression PTE. Subsequent patch will
disable clearing CCS for CPU:WB BOs for LNL.
This reverts commit 23683061805be368c8d1c7e7ff52abc470cac275.
Cc: Christian König <christian.koenig@amd.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828083635.23601-1-nirmoy.das@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Setting 'nomodeset' on the kernel command line disables all graphics
drivers with modesetting capabilities, leaving only firmware drivers,
such as simpledrm or efifb.
Most DRM drivers automatically support 'nomodeset' via DRM's module
helper macros. In xe, which uses regular module_init(), manually call
drm_firmware_drivers_only() to test for 'nomodeset'. Do not register
the driver if set.
v2:
- use xe's init table (Lucas)
- do NULL test for init/exit functions
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240827121003.97429-1-tzimmermann@suse.de
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
dma_fence_chain_free() can handle NULL input, there is no need for NULL
check by caller.
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jagmeet Randhawa <jagmeet.randhawa@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240820090230.3258128-3-himal.prasad.ghimiray@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
dma_fence_put() and dma_fence_chain_free() can handle NULL input,
there is no need for NULL check by caller.
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240820090230.3258128-2-himal.prasad.ghimiray@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
drm_sched_job_add_dependency() drops references even in case of error,
no need for caller to call dma_fence_put.
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240820090230.3258128-1-himal.prasad.ghimiray@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Lunar Lake has been usable for a while in a desktop setup. Bugs are
sporadically showing up in CI, but being promptly fixed. Nothing very
concerning.
All the uapi changes related to fundamental platform usage have been
finalized.
Remove the force_probe requirement and enable the platform by default.
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240822224615.793540-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
- lrc->bo NULL check is not needed in xe_lrc_snapshot_capture() as
its already been taken care of in xe_lrc_init().
Signed-off-by: Apoorva Singh <apoorva.singh@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240816080355.897256-1-apoorva.singh@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Clang warns (or errors with CONFIG_DRM_WERROR or CONFIG_WERROR):
drivers/gpu/drm/xe/xe_ggtt.c:810:3: error: variable 'total' is uninitialized when used here [-Werror,-Wuninitialized]
810 | total += hole_size;
| ^~~~~
drivers/gpu/drm/xe/xe_ggtt.c:798:11: note: initialize the variable 'total' to silence this warning
798 | u64 total;
| ^
| = 0
1 error generated.
Move the zero initialization of total from
xe_gt_sriov_pf_config_print_available_ggtt() to xe_ggtt_print_holes() to
resolve the warning.
Fixes: 136367290ea5 ("drm/xe: Introduce xe_ggtt_print_holes")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823-drm-xe-fix-total-in-xe_ggtt_print_holes-v1-1-12b02d079327@kernel.org
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
In XE, display runtime suspend / resume routines are called only
if d3cold is allowed. This makes the driver unable to detect any
HPDs once the device goes into runtime suspend state in platforms
like LNL. Update the display runtime suspend / resume routines
to include HPD polling regardless of d3cold status.
While xe_display_pm_suspend/resume() performs steps during runtime
suspend/resume that shouldn't happen, like suspending MST and they
are missing other steps like enabling DC9, this patchset is meant
to keep the current behavior wrt. these, leaving the corresponding
updates for a follow-up
v2: have a separate function for display runtime s/r (Rodrigo)
v3: better streamlining of system s/r and runtime s/r calls (Imre)
v4: rebased
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823112148.327015-4-vinod.govindapillai@intel.com
This is a preparation for the follow-up patch where polling
will be handled properly for all cases during runtime suspend/resume.
v2: rebased
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823112148.327015-3-vinod.govindapillai@intel.com
