During the High-Speed Isochronous Audio transfers, xHCI
controller on certain AMD platforms experiences momentary data
loss. This results in Missed Service Errors (MSE) being
generated by the xHCI.
The root cause of the MSE is attributed to the ISOC OUT endpoint
being omitted from scheduling. This can happen when an IN
endpoint with a 64ms service interval either is pre-scheduled
prior to the ISOC OUT endpoint or the interval of the ISOC OUT
endpoint is shorter than that of the IN endpoint. Consequently,
the OUT service is neglected when an IN endpoint with a service
interval exceeding 32ms is scheduled concurrently (every 64ms in
this scenario).
This issue is particularly seen on certain older AMD platforms.
To mitigate this problem, it is recommended to adjust the service
interval of the IN endpoint to not exceed 32ms (interval 8). This
adjustment ensures that the OUT endpoint will not be bypassed,
even if a smaller interval value is utilized.
Cc: stable <stable@kernel.org>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250627144127.3889714-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 96c7bf8f6b3e ("usb: dwc3: gadget: Cleanup SG handling") updated
the TRB reclaim path to use the TRB CHN (Chain) bit to determine whether
a TRB was part of a chain. However, this inadvertently changed the
behavior of reclaiming the final TRB in some scatter-gather or short
transfer cases.
In particular, if the final TRB did not have the CHN bit set, the
cleanup path could incorrectly skip clearing the HWO (Hardware Own)
bit, leaving stale TRBs in the ring. This resulted in broken data
transfer completions in userspace, notably for MTP over FunctionFS.
Fix this by unconditionally clearing the HWO bit during TRB reclaim,
regardless of the CHN bit state. This restores correct behavior
especially for transfers that require ZLPs or end on non-CHN TRBs.
Fixes: 61440628a4ff ("usb: dwc3: gadget: Cleanup SG handling")
Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/AM8PR06MB7521A29A8863C838B54987B6BC7BA@AM8PR06MB7521.eurprd06.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Delayed work to prevent USB3 hubs from runtime-suspending immediately
after resume was added in commit 8f5b7e2bec1c ("usb: hub: fix detection
of high tier USB3 devices behind suspended hubs").
This delayed work needs be flushed if system suspends, or hub needs to
be quiesced for other reasons right after resume. Not flushing it
triggered issues on QC SC8280XP CRD board during suspend/resume testing.
Fix it by flushing the delayed resume work in hub_quiesce()
The delayed work item that allow hub runtime suspend is also scheduled
just before calling autopm get. Alan pointed out there is a small risk
that work is run before autopm get, which would call autopm put before
get, and mess up the runtime pm usage order.
Swap the order of work sheduling and calling autopm get to solve this.
Cc: stable <stable@kernel.org>
Fixes: 8f5b7e2bec1c ("usb: hub: fix detection of high tier USB3 devices behind suspended hubs")
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Closes: https://lore.kernel.org/linux-usb/acaaa928-832c-48ca-b0ea-d202d5cd3d6c@oss.qualcomm.com
Reported-by: Alan Stern <stern@rowland.harvard.edu>
Closes: https://lore.kernel.org/linux-usb/c73fbead-66d7-497a-8fa1-75ea4761090a@rowland.harvard.edu
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250626130102.3639861-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The deadlock can occur due to a recursive lock acquisition of
`cros_typec_altmode_data::mutex`.
The call chain is as follows:
1. cros_typec_altmode_work() acquires the mutex
2. typec_altmode_vdm() -> dp_altmode_vdm() ->
3. typec_altmode_exit() -> cros_typec_altmode_exit()
4. cros_typec_altmode_exit() attempts to acquire the mutex again
To prevent this, defer the `typec_altmode_exit()` call by scheduling
it rather than calling it directly from within the mutex-protected
context.
Cc: stable <stable@kernel.org>
Fixes: b4b38ffb38c9 ("usb: typec: displayport: Receive DP Status Update NAK request exit dp altmode")
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250624133246.3936737-1-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A poorly implemented DisplayPort Alt Mode port partner can indicate
that its pin assignment capabilities are greater than the maximum
value, DP_PIN_ASSIGN_F. In this case, calls to pin_assignment_show
will cause a BRK exception due to an out of bounds array access.
Prevent for loop in pin_assignment_show from accessing
invalid values in pin_assignments by adding DP_PIN_ASSIGN_MAX
value in typec_dp.h and using i < DP_PIN_ASSIGN_MAX as a loop
condition.
Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode")
Cc: stable <stable@kernel.org>
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250618224943.3263103-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SSP2 controller has extra endpoint state preserve bit (ESP) which
setting causes that endpoint state will be preserved during
Halt Endpoint command. It is used only for EP0.
Without this bit the Command Verifier "TD 9.10 Bad Descriptor Test"
failed.
Setting this bit doesn't have any impact for SSP controller.
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/PH7PR07MB95382CCD50549DABAEFD6156DD7CA@PH7PR07MB9538.namprd07.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes Type-C compliance test TD 4.7.6 - Try.SNK DRP Connect
SNKAS.
tVbusON has a limit of 275ms when entering SRC_ATTACHED. Compliance
testers can interpret the TryWait.Src to Attached.Src transition after
Try.Snk as being in Attached.Src the entire time, so ~170ms is lost
to the debounce timer.
Setting the data role can be a costly operation in host mode, and when
completed after 100ms can cause Type-C compliance test check TD 4.7.5.V.4
to fail.
Turn VBUS on before tcpm_set_roles to meet timing requirement.
Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)")
Cc: stable <stable@kernel.org>
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250618230606.3272497-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 6ccb83d6c4972ebe6ae49de5eba051de3638362c.
Commit 6ccb83d6c497 ("usb: xhci: Implement xhci_handshake_check_state()
helper") was introduced to workaround watchdog timeout issues on some
platforms, allowing xhci_reset() to bail out early without waiting
for the reset to complete.
Skipping the xhci handshake during a reset is a dangerous move. The
xhci specification explicitly states that certain registers cannot
be accessed during reset in section 5.4.1 USB Command Register (USBCMD),
Host Controller Reset (HCRST) field:
"This bit is cleared to '0' by the Host Controller when the reset
process is complete. Software cannot terminate the reset process
early by writinga '0' to this bit and shall not write any xHC
Operational or Runtime registers until while HCRST is '1'."
This behavior causes a regression on SNPS DWC3 USB controller with
dual-role capability. When the DWC3 controller exits host mode and
removes xhci while a reset is still in progress, and then tries to
configure its hardware for device mode, the ongoing reset leads to
register access issues; specifically, all register reads returns 0.
These issues extend beyond the xhci register space (which is expected
during a reset) and affect the entire DWC3 IP block, causing the DWC3
device mode to malfunction.
Cc: stable <stable@kernel.org>
Fixes: 6ccb83d6c497 ("usb: xhci: Implement xhci_handshake_check_state() helper")
Signed-off-by: Roy Luo <royluo@google.com>
Link: https://lore.kernel.org/r/20250522190912.457583-3-royluo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci_reset() currently returns -ENODEV if XHCI_STATE_REMOVING is
set, without completing the xhci handshake, unless the reset completes
exceptionally quickly. This behavior causes a regression on Synopsys
DWC3 USB controllers with dual-role capabilities.
Specifically, when a DWC3 controller exits host mode and removes xhci
while a reset is still in progress, and then attempts to configure its
hardware for device mode, the ongoing, incomplete reset leads to
critical register access issues. All register reads return zero, not
just within the xHCI register space (which might be expected during a
reset), but across the entire DWC3 IP block.
This patch addresses the issue by preventing xhci_reset() from being
called in xhci_resume() and bailing out early in the reinit flow when
XHCI_STATE_REMOVING is set.
Cc: stable <stable@kernel.org>
Fixes: 6ccb83d6c497 ("usb: xhci: Implement xhci_handshake_check_state() helper")
Suggested-by: Mathias Nyman <mathias.nyman@intel.com>
Signed-off-by: Roy Luo <royluo@google.com>
Link: https://lore.kernel.org/r/20250522190912.457583-2-royluo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A race condition occurs when gs_start_io() calls either gs_start_rx() or
gs_start_tx(), as those functions briefly drop the port_lock for
usb_ep_queue(). This allows gs_close() and gserial_disconnect() to clear
port.tty and port_usb, respectively.
Use the null-safe TTY Port helper function to wake up TTY.
Example
CPU1: CPU2:
gserial_connect() // lock
gs_close() // await lock
gs_start_rx() // unlock
usb_ep_queue()
gs_close() // lock, reset port.tty and unlock
gs_start_rx() // lock
tty_wakeup() // NPE
Fixes: 35f95fd7f234 ("TTY: usb/u_serial, use tty from tty_port")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Reviewed-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Link: https://lore.kernel.org/linux-usb/20240116141801.396398-1-khtsai@google.com/
Link: https://lore.kernel.org/r/20250617050844.1848232-2-khtsai@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit ffd603f214237e250271162a5b325c6199a65382.
Commit ffd603f21423 ("usb: gadget: u_serial: Add null pointer check in
gs_start_io") adds null pointer checks at the beginning of the
gs_start_io() function to prevent a null pointer dereference. However,
these checks are redundant because the function's comment already
requires callers to hold the port_lock and ensure port.tty and port_usb
are not null. All existing callers already follow these rules.
The true cause of the null pointer dereference is a race condition. When
gs_start_io() calls either gs_start_rx() or gs_start_tx(), the port_lock
is temporarily released for usb_ep_queue(). This allows port.tty and
port_usb to be cleared.
Fixes: ffd603f21423 ("usb: gadget: u_serial: Add null pointer check in gs_start_io")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Reviewed-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250617050844.1848232-1-khtsai@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shawn and John reported a hang issue during system suspend as below:
- USB gadget is enabled as Ethernet
- There is data transfer over USB Ethernet (scp a big file between host
and device)
- Device is going in/out suspend (echo mem > /sys/power/state)
The root cause is the USB device controller is suspended but the USB bus
is still active which caused the USB host continues to transfer data with
device and the device continues to queue USB requests (in this case, a
delayed TCP ACK packet trigger the issue) after controller is suspended,
however the USB controller clock is already gated off. Then if udc driver
access registers after that point, the system will hang.
The correct way to avoid such issue is to disconnect device from host when
the USB bus is not at suspend state. Then the host will receive disconnect
event and stop data transfer in time. To continue make USB gadget device
work after system resume, this will reconnect device automatically.
To make usb wakeup work if USB bus is already at suspend state, this will
keep connection for it only when USB device controller has enabled wakeup
capability.
Reported-by: Shawn Guo <shawnguo@kernel.org>
Reported-by: John Ernberg <john.ernberg@actia.se>
Closes: https://lore.kernel.org/linux-usb/aEZxmlHmjeWcXiF3@dragon/
Tested-by: John Ernberg <john.ernberg@actia.se> # iMX8QXP
Fixes: 235ffc17d014 ("usb: chipidea: udc: add suspend/resume support for device controller")
Cc: stable <stable@kernel.org>
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20250614124914.207540-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device link to the USB4 host interface has to be removed
manually since it's no longer auto removed.
Fixes: 623dae3e7084 ("usb: acpi: fix boot hang due to early incorrect 'tunneled' USB3 device links")
Cc: stable <stable@kernel.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20250611111415.2707865-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB3 devices connected behind several external suspended hubs may not
be detected when plugged in due to aggressive hub runtime pm suspend.
The hub driver immediately runtime-suspends hubs if there are no
active children or port activity.
There is a delay between the wake signal causing hub resume, and driver
visible port activity on the hub downstream facing ports.
Most of the LFPS handshake, resume signaling and link training done
on the downstream ports is not visible to the hub driver until completed,
when device then will appear fully enabled and running on the port.
This delay between wake signal and detectable port change is even more
significant with chained suspended hubs where the wake signal will
propagate upstream first. Suspended hubs will only start resuming
downstream ports after upstream facing port resumes.
The hub driver may resume a USB3 hub, read status of all ports, not
yet see any activity, and runtime suspend back the hub before any
port activity is visible.
This exact case was seen when conncting USB3 devices to a suspended
Thunderbolt dock.
USB3 specification defines a 100ms tU3WakeupRetryDelay, indicating
USB3 devices expect to be resumed within 100ms after signaling wake.
if not then device will resend the wake signal.
Give the USB3 hubs twice this time (200ms) to detect any port
changes after resume, before allowing hub to runtime suspend again.
Cc: stable <stable@kernel.org>
Fixes: 2839f5bcfcfc ("USB: Turn on auto-suspend for USB 3.0 hubs.")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250611112441.2267883-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some varieties of this device don't work with
RESET_RESUME alone.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20250605122852.1440382-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When dwc3_gadget_soft_disconnect() fails, dwc3_suspend_common() keeps
going with the suspend, resulting in a period where the power domain is
off, but the gadget driver remains connected. Within this time frame,
invoking vbus_event_work() will cause an error as it attempts to access
DWC3 registers for endpoint disabling after the power domain has been
completely shut down.
Abort the suspend sequence when dwc3_gadget_suspend() cannot halt the
controller and proceeds with a soft connect.
Fixes: 9f8a67b65a49 ("usb: dwc3: gadget: fix gadget suspend/resume")
Cc: stable <stable@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://lore.kernel.org/r/20250528100315.2162699-1-khtsai@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It doesn't need to do it, and the related command event returns
'Slot Not Enabled Error' status.
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Cc: stable <stable@kernel.org>
Suggested-by: Hongliang Yang <hongliang.yang@cixtech.com>
Reviewed-by: Fugang Duan <fugang.duan@cixtech.com>
Signed-off-by: Peter Chen <peter.chen@cixtech.com>
Link: https://lore.kernel.org/r/20250619013413.35817-1-peter.chen@cixtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Move warnings about linux/export.h from W=1 to W=2
- Fix structure type overrides in gendwarfksyms
-----BEGIN PGP SIGNATURE-----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=iO3g
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Move warnings about linux/export.h from W=1 to W=2
- Fix structure type overrides in gendwarfksyms
* tag 'kbuild-fixes-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
gendwarfksyms: Fix structure type overrides
kbuild: move warnings about linux/export.h from W=1 to W=2
As we always iterate through the entire die_map when expanding
type strings, recursively processing referenced types in
type_expand_child() is not actually necessary. Furthermore,
the type_string kABI rule added in commit c9083467f7b9
("gendwarfksyms: Add a kABI rule to override type strings") can
fail to override type strings for structures due to a missing
kabi_get_type_string() check in this function.
Fix the issue by dropping the unnecessary recursion and moving
the override check to type_expand(). Note that symbol versions
are otherwise unchanged with this patch.
Fixes: c9083467f7b9 ("gendwarfksyms: Add a kABI rule to override type strings")
Reported-by: Giuliano Procida <gprocida@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
-----BEGIN PGP SIGNATURE-----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=N1zM
-----END PGP SIGNATURE-----
Merge tag 'block-6.16-20250614' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- Fix for a deadlock on queue freeze with zoned writes
- Fix for zoned append emulation
- Two bio folio fixes, for sparsemem and for very large folios
- Fix for a performance regression introduced in 6.13 when plug
insertion was changed
- Fix for NVMe passthrough handling for polled IO
- Document the ublk auto registration feature
- loop lockdep warning fix
* tag 'block-6.16-20250614' of git://git.kernel.dk/linux:
nvme: always punt polled uring_cmd end_io work to task_work
Documentation: ublk: Separate UBLK_F_AUTO_BUF_REG fallback behavior sublists
block: Fix bvec_set_folio() for very large folios
bio: Fix bio_first_folio() for SPARSEMEM without VMEMMAP
block: use plug request list tail for one-shot backmerge attempt
block: don't use submit_bio_noacct_nocheck in blk_zone_wplug_bio_work
block: Clear BIO_EMULATES_ZONE_APPEND flag on BIO completion
ublk: document auto buffer registration(UBLK_F_AUTO_BUF_REG)
loop: move lo_set_size() out of queue freeze
-----BEGIN PGP SIGNATURE-----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=79aU
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.16-20250614' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Fix for a race between SQPOLL exit and fdinfo reading.
It's slim and I was only able to reproduce this with an artificial
delay in the kernel. Followup sparse fix as well to unify the access
to ->thread.
- Fix for multiple buffer peeking, avoiding truncation if possible.
- Run local task_work for IOPOLL reaping when the ring is exiting.
This currently isn't done due to an assumption that polled IO will
never need task_work, but a fix on the block side is going to change
that.
* tag 'io_uring-6.16-20250614' of git://git.kernel.dk/linux:
io_uring: run local task_work from ring exit IOPOLL reaping
io_uring/kbuf: don't truncate end buffer for multiple buffer peeks
io_uring: consistently use rcu semantics with sqpoll thread
io_uring: fix use-after-free of sq->thread in __io_uring_show_fdinfo()
'kernel' crate:
- 'hrtimer': fix future compile error when the 'impl_has_hr_timer!'
macro starts to get called.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPjU5OPd5QIZ9jqqOGXyLc2htIW0FAmhNQGMACgkQGXyLc2ht
IW0l9g//fk7D9KC9Dv86miWNgk7RAuHpmCoK3PM4mIr983wA8DO7sl+0cSIJzxEp
sYe0TGuXw/2jng1wPide9lG77yNe4HwJR2aeZJuFwxwki9yfd5rMqK7yizXxC8iY
3EUyewp4qiBe4r3IFTfl4syo0TqdoSJ+J9wKOADzw/OzwZW4xO/shDZmCicYMRDJ
Z20ke6a0benwmSYRkBm4XV3vS+rVf1NH54KrNK02KTqmQa0ErFMN2lCOUmwUfrTX
980T0hfjpzwzB9LVn76d62bv16AwgM9Vgdx6OWhYste/7Vk2w6ZUfmXzBI9qlLry
zaQi4oCc+eRI5fSs376nq8rpiFiCINxZmaHM3L8VvXhAB9vfOgECdXiGxVXJk60O
rlUDQ5g1Lbf4MdrQMvHtn9ub8uRK0E2uktlnmaHh5D7RTrh7+UfJyvU2RYy2dE9w
3QGINktZkIaHIdypUShtClBZClDI7ZfK2x6oQmICow9YNkxIV6l8DO6FGuJCjPUb
gauMgTJBmIYh9qfcSi4+R01tie3/uzT6MRi7ZvdceWvq9wCPPzWMRFqYtelAQVnq
qX9EhcPuVM84IhJtcuhtsuWU6wlhv+1rXHKFjbtrBB8DHxps/KbQrI8p36QSNBPi
XEgrSXjjwjYZ9TszeAMmnbU8vpNXBKoWjOj8N1jQGWZX6eMMQmg=
=J+av
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust fix from Miguel Ojeda:
- 'hrtimer': fix future compile error when the 'impl_has_hr_timer!'
macro starts to get called
* tag 'rust-fixes-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: time: Fix compile error in impl_has_hr_timer macro
or aren't considered necessary for -stable kernels. Only 4 are for MM.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaE0BIAAKCRDdBJ7gKXxA
jkTMAQCTWhvZZdcEdyxo0HQbGo2pcqB4awXjire6GabBFcr1owD5AVV0OYiQNNEN
tbOVsr+2aZBr/aXTkTy4VpOg1kin8Ak=
=ThOY
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-06-13-21-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"9 hotfixes. 3 are cc:stable and the remainder address post-6.15 issues
or aren't considered necessary for -stable kernels. Only 4 are for MM"
* tag 'mm-hotfixes-stable-2025-06-13-21-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: add mmap_prepare() compatibility layer for nested file systems
init: fix build warnings about export.h
MAINTAINERS: add Barry as a THP reviewer
drivers/rapidio/rio_cm.c: prevent possible heap overwrite
mm: close theoretical race where stale TLB entries could linger
mm/vma: reset VMA iterator on commit_merge() OOM failure
docs: proc: update VmFlags documentation in smaps
scatterlist: fix extraneous '@'-sign kernel-doc notation
selftests/mm: skip failed memfd setups in gup_longterm
All fixes for drivers. The core change in the error handler is simply
to translate an ALUA specific sense code into a retry the ALUA
components can handle and won't impact any other devices.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCaEyPIiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishVXlAPoCGJTL
EhMVta96mQGEBK2YfgBQGh87cMSNi7u3f04xawEA84UrOhakLtsVYp9Rua7k0VzL
blmQtDCoujlsPAasaQg=
=0N8r
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"All fixes for drivers.
The core change in the error handler is simply to translate an ALUA
specific sense code into a retry the ALUA components can handle and
won't impact any other devices"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: error: alua: I/O errors for ALUA state transitions
scsi: storvsc: Increase the timeouts to storvsc_timeout
scsi: s390: zfcp: Ensure synchronous unit_add
scsi: iscsi: Fix incorrect error path labels for flashnode operations
scsi: mvsas: Fix typos in per-phy comments and SAS cmd port registers
scsi: core: ufs: Fix a hang in the error handler
vc4:
- Fix infinite EPROBE_DEFER loop in vc4 probing.
amdxdna:
- Fix amdxdna firmware size.
meson:
- modesetting fixes
sitronix:
- Kconfig fix for st7171-i2c.
dma-buf:
- Fix -EBUSY WARN_ON_ONCE in dma-buf
udmabuf:
- Use dma_sync_sgtable_for_cpu in udmabuf.
xe:
- Fix regression disallowing 64K SVM migration
- Use a bounce buffer for WA BB
-----BEGIN PGP SIGNATURE-----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=VNUR
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2025-06-14' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Quiet week, only two pull requests came my way, xe has a couple of
fixes and then a bunch of fixes across the board, vc4 probably fixes
the biggest problem:
vc4:
- Fix infinite EPROBE_DEFER loop in vc4 probing
amdxdna:
- Fix amdxdna firmware size
meson:
- modesetting fixes
sitronix:
- Kconfig fix for st7171-i2c
dma-buf:
- Fix -EBUSY WARN_ON_ONCE in dma-buf
udmabuf:
- Use dma_sync_sgtable_for_cpu in udmabuf
xe:
- Fix regression disallowing 64K SVM migration
- Use a bounce buffer for WA BB"
* tag 'drm-fixes-2025-06-14' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/lrc: Use a temporary buffer for WA BB
udmabuf: use sgtable-based scatterlist wrappers
dma-buf: fix compare in WARN_ON_ONCE
drm/sitronix: st7571-i2c: Select VIDEOMODE_HELPERS
drm/meson: fix more rounding issues with 59.94Hz modes
drm/meson: use vclk_freq instead of pixel_freq in debug print
drm/meson: fix debug log statement when setting the HDMI clocks
drm/vc4: fix infinite EPROBE_DEFER loop
drm/xe/svm: Fix regression disallowing 64K SVM migration
accel/amdxdna: Fix incorrect PSP firmware size
In preparation for needing to shift NVMe passthrough to always use
task_work for polled IO completions, ensure that those are suitably
run at exit time. See commit:
9ce6c9875f3e ("nvme: always punt polled uring_cmd end_io work to task_work")
for details on why that is necessary.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently NVMe uring_cmd completions will complete locally, if they are
polled. This is done because those completions are always invoked from
task context. And while that is true, there's no guarantee that it's
invoked under the right ring context, or even task. If someone does
NVMe passthrough via multiple threads and with a limited number of
poll queues, then ringA may find completions from ringB. For that case,
completing the request may not be sound.
Always just punt the passthrough completions via task_work, which will
redirect the completion, if needed.
Cc: stable@vger.kernel.org
Fixes: 585079b6e425 ("nvme: wire up async polling for io passthrough commands")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Update the faux device handling code in the driver core and address
an ACPI APEI error injection driver failure that started to occur
after switching it over to using a faux device on top of that (Dan
Williams).
- Update data types of variables passed as arguments to
mwait_idle_with_hints() in the ACPI PAD (processor aggregator device)
driver to match the function definition after recent changes (Uros
Bizjak).
- Fix a NULL pointer dereference in the ACPI CPPC library that occurs
when nosmp is passed to the kernel in the command line (Yunhui Cui).
- Ignore ECDT tables with an invalid ID string to prevent using an
incorrect GPE for signaling events on some systems (Armin Wolf).
- Add a new IRQ override quirk for MACHENIKE 16P (Wentao Guan).
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmhMhWMSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO11QwIAJauSuEZ6CMSB+ntXZ0WO+Sx62EKn1/w
sC8auAtfmp7H31m1YjqJllt/n2tadJO2ZMAzMuHeVp+1LIxHnNPR6e97+8z+Xj3m
224NUki1kG7EyEYEwtZnHVOQBue1nKxNZqQ4NHuuwIXIj2dE4GgsCEqT+vrZVmI+
JLZWo8pMH2puAakdBkPtsdqWzTNq7lOAsigkoDvbO4Azz2GCPilgrgzOeqdOlFw8
URwM7qhk6Wd77Zr9kyzQIRBt8LVwKIF6i13eR4CXCNzp+5O0qYlci1dBYErL/oWU
u2D5ebQMCCKqBnNHowBr9ChM4QwmHB9YdTnx574z7kUKCjrgQOrC7hQ=
=Jx0s
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix an ACPI APEI error injection driver failure that started to
occur after switching it over to using a faux device, address an EC
driver issue related to invalid ECDT tables, clean up the usage of
mwait_idle_with_hints() in the ACPI PAD driver, add a new IRQ override
quirk, and fix a NULL pointer dereference related to nosmp:
- Update the faux device handling code in the driver core and address
an ACPI APEI error injection driver failure that started to occur
after switching it over to using a faux device on top of that (Dan
Williams)
- Update data types of variables passed as arguments to
mwait_idle_with_hints() in the ACPI PAD (processor aggregator
device) driver to match the function definition after recent
changes (Uros Bizjak)
- Fix a NULL pointer dereference in the ACPI CPPC library that occurs
when nosmp is passed to the kernel in the command line (Yunhui Cui)
- Ignore ECDT tables with an invalid ID string to prevent using an
incorrect GPE for signaling events on some systems (Armin Wolf)
- Add a new IRQ override quirk for MACHENIKE 16P (Wentao Guan)"
* tag 'acpi-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: resource: Use IRQ override on MACHENIKE 16P
ACPI: EC: Ignore ECDT tables with an invalid ID string
ACPI: CPPC: Fix NULL pointer dereference when nosmp is used
ACPI: PAD: Update arguments of mwait_idle_with_hints()
ACPI: APEI: EINJ: Do not fail einj_init() on faux_device_create() failure
driver core: faux: Quiet probe failures
driver core: faux: Suppress bind attributes
- Implement CpuId Rust abstraction and use it to fix doctest failure
related to the recently introduced cpumask abstraction (Viresh Kumar).
- Do minor cleanups in the `# Safety` sections for cpufreq abstractions
added recently (Viresh Kumar).
- Unbreak cpupower systemd service units installation on some systems
by adding a unitdir variable for specifying the location to install
them (Francesco Poli).
- Eliminate mwait_play_dead_cpuid_hint() again after reverting its
elimination during the 6.16 merge window due to a problem with
handling "dead" SMT siblings, but this time prevent leaving them in
C1 after initialization by taking them online and back offline when
a proper cpuidle driver for the platform has been registered (Rafael
Wysocki).
- Update data types of variables passed as arguments to
mwait_idle_with_hints() to match the function definition
after recent changes (Uros Bizjak).
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmhMgawSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1dA0H/j7V4sfA383pZfWwegRC4MQeiW4EVdIx
2G6d33Gsfv+zEzTSsPvtKghR4eUIldTdco04bqusMcI+qIfgdWIEBpi2tQhJU2Tt
Bgc24Kya0n85KKNLHs60xm0WXhkAyu3TFad+4yTGXRZEmAD+O6lyUPjum+mn+gbx
HuLE6KE9D/qzzYOU03kjCsJExBf7vv0bBNIqGqNyuFLYOaoqZd5rLhNhhxm2AkYi
hZ5wmYBY+2SJRzwryNNHQKKmZ1jk9HGapnIVrxQ2Pjc0AhX+tRW7FI5lDDvUWtW+
RN/226Y3OQ3JHXAj4S0K64t0ZEpiEKS2oPatjGzosNmdyI0f+CRACQs=
=OcND
-----END PGP SIGNATURE-----
Merge tag 'pm-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix the cpupower utility installation, fix up the recently added
Rust abstractions for cpufreq and OPP, restore the x86 update
eliminating mwait_play_dead_cpuid_hint() that has been reverted during
the 6.16 merge window along with preventing the failure caused by it
from happening, and clean up mwait_idle_with_hints() usage in
intel_idle:
- Implement CpuId Rust abstraction and use it to fix doctest failure
related to the recently introduced cpumask abstraction (Viresh
Kumar)
- Do minor cleanups in the `# Safety` sections for cpufreq
abstractions added recently (Viresh Kumar)
- Unbreak cpupower systemd service units installation on some systems
by adding a unitdir variable for specifying the location to install
them (Francesco Poli)
- Eliminate mwait_play_dead_cpuid_hint() again after reverting its
elimination during the 6.16 merge window due to a problem with
handling "dead" SMT siblings, but this time prevent leaving them in
C1 after initialization by taking them online and back offline when
a proper cpuidle driver for the platform has been registered
(Rafael Wysocki)
- Update data types of variables passed as arguments to
mwait_idle_with_hints() to match the function definition after
recent changes (Uros Bizjak)"
* tag 'pm-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
rust: cpu: Add CpuId::current() to retrieve current CPU ID
rust: Use CpuId in place of raw CPU numbers
rust: cpu: Introduce CpuId abstraction
intel_idle: Update arguments of mwait_idle_with_hints()
cpufreq: Convert `/// SAFETY` lines to `# Safety` sections
cpupower: split unitdir from libdir in Makefile
Reapply "x86/smp: Eliminate mwait_play_dead_cpuid_hint()"
ACPI: processor: Rescan "dead" SMT siblings during initialization
intel_idle: Rescan "dead" SMT siblings during initialization
x86/smp: PM/hibernate: Split arch_resume_nosmt()
intel_idle: Use subsys_initcall_sync() for initialization
Merge assorted ACPI updates for 6.16-rc2:
- Update data types of variables passed as arguments to
mwait_idle_with_hints() in the ACPI PAD (processor aggregator device)
driver to match the function definition after recent changes (Uros
Bizjak).
- Fix a NULL pointer dereference in the ACPI CPPC library that occurs
when nosmp is passed to the kernel in the command line (Yunhui Cui).
- Ignore ECDT tables with an invalid ID string to prevent using an
incorrect GPE for signaling events on some systems (Armin Wolf).
- Add a new IRQ override quirk for MACHENIKE 16P (Wentao Guan).
* acpi-pad:
ACPI: PAD: Update arguments of mwait_idle_with_hints()
* acpi-cppc:
ACPI: CPPC: Fix NULL pointer dereference when nosmp is used
* acpi-ec:
ACPI: EC: Ignore ECDT tables with an invalid ID string
* acpi-resource:
ACPI: resource: Use IRQ override on MACHENIKE 16P
Merge cpuidle updates for 6.16-rc2:
- Update data types of variables passed as arguments to
mwait_idle_with_hints() to match the function definition
after recent changes (Uros Bizjak).
- Eliminate mwait_play_dead_cpuid_hint() again after reverting its
elimination during the merge window due to a problem with handling
"dead" SMT siblings, but this time prevent leaving them in C1 after
initialization by taking them online and back offline when a proper
cpuidle driver for the platform has been registered (Rafael Wysocki).
* pm-cpuidle:
intel_idle: Update arguments of mwait_idle_with_hints()
Reapply "x86/smp: Eliminate mwait_play_dead_cpuid_hint()"
ACPI: processor: Rescan "dead" SMT siblings during initialization
intel_idle: Rescan "dead" SMT siblings during initialization
x86/smp: PM/hibernate: Split arch_resume_nosmt()
intel_idle: Use subsys_initcall_sync() for initialization
Merge a cpupower utility fix for 6.16-rc2 that unbreaks systemd service
units installation on some sysems (Francesco Poli).
* pm-tools:
cpupower: split unitdir from libdir in Makefile
A collection of driver specific fixes, most minor apart from the OMAP
ones which disable some recent performance optimisations in some
non-standard cases where we could start driving the bus incorrectly.
The change to the stm32-ospi driver to use the newer reset APIs is a fix
for interactions with other IP sharing the same reset line in some SoCs.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmhMXiEACgkQJNaLcl1U
h9DfLwf9F7yAsLh7eGYPCqjDB365LaAuroOWuM5hB74cTFis9WJpcEI1pk9GdaD0
m7TAkc+cxo0KBvpe0/t0+oqSBkUdcZ4ASXZp4zYnsj9dGhBcmlS0szHIOZWknMxZ
E2pzHWj6p4/+zntWa+CCiiVGHz0PV3I9Oq3V1kI1EqyAZXc9uf5hj0hITVulJ4ih
8+Y+927MpJ2dis8CaHeubDfNxnwJlCLS5GFwZaEhTXWp6IttxjH5KmeZu2Wtahdw
ZcqUDLPYxdzoirDoGvdGBTHc0NMF843WD9wFWb29BzuyPLZYGAwGXDhGtHqSaGAo
6HB5529nuKDAC1XNyRN6NA4bQosMaw==
=ShaP
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A collection of driver specific fixes, most minor apart from the OMAP
ones which disable some recent performance optimisations in some
non-standard cases where we could start driving the bus incorrectly.
The change to the stm32-ospi driver to use the newer reset APIs is a
fix for interactions with other IP sharing the same reset line in some
SoCs"
* tag 'spi-fix-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-pci1xxxx: Drop MSI-X usage as unsupported by DMA engine
spi: stm32-ospi: clean up on error in probe()
spi: stm32-ospi: Make usage of reset_control_acquire/release() API
spi: offload: check offload ops existence before disabling the trigger
spi: spi-pci1xxxx: Fix error code in probe
spi: loongson: Fix build warnings about export.h
spi: omap2-mcspi: Disable multi-mode when the previous message kept CS asserted
spi: omap2-mcspi: Disable multi mode when CS should be kept asserted after message
One minor fix for a leak in the DT parsing code in the max20086 driver.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmhMXpMACgkQJNaLcl1U
h9DxfAf/Sk4lxMl2JHbjk+TYXz5Q+Y04fpGYMCnV1u64kq9yxB2NKBjMomS6YysY
qsueW1caCJM/D/8MUqkU6mbQxGCt6V8eKWjVxcjfPOEM/lWCP+FfsMOdu9rXij1s
bhR4fI7jmaDYNjwaDCnyK7F0/TxUj5GiOPV3d+5C3gQ6VXFB+wTs1jzalvszP7WP
3doM/U8NZH7gg7zztvKW8l89d8OWCc7L83dW/ecrAAMX+jbi6JC8qT5VTbKkdSfs
Y1dPrTloRIj+z1n72YY6RLsqD8qO5P5KW2wy1qbnqFEZx82s0xFcAgcCkkeK3lnG
He8R+qqfZvjL1o+shdlCHthr+R82Bw==
=bJgB
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One minor fix for a leak in the DT parsing code in the max20086 driver"
* tag 'regulator-fix-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: max20086: Fix refcount leak in max20086_parse_regulators_dt()
If an exiting non-autoreaping task has already passed exit_notify() and
calls handle_posix_cpu_timers() from IRQ, it can be reaped by its parent
or debugger right after unlock_task_sighand().
If a concurrent posix_cpu_timer_del() runs at that moment, it won't be
able to detect timer->it.cpu.firing != 0: cpu_timer_task_rcu() and/or
lock_task_sighand() will fail.
Add the tsk->exit_state check into run_posix_cpu_timers() to fix this.
This fix is not needed if CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y, because
exit_task_work() is called before exit_notify(). But the check still
makes sense, task_work_add(&tsk->posix_cputimers_work.work) will fail
anyway in this case.
Cc: stable@vger.kernel.org
Reported-by: Benoît Sevens <bsevens@google.com>
Fixes: 0bdd2ed4138e ("sched: run_posix_cpu_timers: Don't check ->exit_state, use lock_task_sighand()")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Do not free "head" variable in filter_free_subsystem_filters()
The first error path jumps to "free_now" label but first frees the newly
allocated "head" variable. But the "free_now" code checks this variable,
and if it is not NULL, it will iterate the list. As this list variable
was already initialized, the "free_now" code will not do anything as it
is empty. But freeing it will cause a UAF bug. The error path should
simply jump to the "free_now" label and leave the "head" variable alone.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaExH8RQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qs+DAQDWBAAmviDcMb+e+9uZi8rR8+Aj+j5S
efPe/g4D2otl5QD/T7u5TZFrSOZfl4Gv9Z1ZWhKj+xfw3FiphODrzHdcsgo=
=eP9r
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fix from Steven Rostedt:
- Do not free "head" variable in filter_free_subsystem_filters()
The first error path jumps to "free_now" label but first frees the
newly allocated "head" variable. But the "free_now" code checks this
variable, and if it is not NULL, it will iterate the list. As this
list variable was already initialized, the "free_now" code will not
do anything as it is empty. But freeing it will cause a UAF bug.
The error path should simply jump to the "free_now" label and leave
the "head" variable alone.
* tag 'trace-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Do not free "head" on error path of filter_free_subsystem_filters()
- Rework of system register accessors for system registers that are
directly writen to memory, so that sanitisation of the in-memory
value happens at the correct time (after the read, or before the
write). For convenience, RMW-style accessors are also provided.
- Multiple fixes for the so-called "arch-timer-edge-cases' selftest,
which was always broken.
x86:
- Make KVM_PRE_FAULT_MEMORY stricter for TDX, allowing userspace to pass
only the "untouched" addresses and flipping the shared/private bit
in the implementation.
- Disable SEV-SNP support on initialization failure
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmhMVEQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNCYwgAoqYz+RTcIx6EwHD/kN/9maUcQVl1
MMmXqfF2jQYmTvk7ocEW1qwx/SV0kB+H9LOThV8SWTvVxDbNqAaUWRDz+wcz3zaO
6/sUwz4dtU4XaTgxYhhB82lsPtJHyM+FM+bNL4rFFnrA1tZ93wRsMEeryZ5h960V
C1Bc+PLBdpj+S3gQGvxeMxnG/n0oOAcecUqQa3ViIOKSfZEc/11+BjjvfvkYqExq
s206faKSqor8xVXUbgtOk3LZreIExj/mD+pwMiUBvG0H0g4wnaG7Arc41QCFMowF
4l4sQVMWFZiKQvQZSfdQOeNsXcepWw0qISK7UeoWpLnpM78uUfCS6iG1rA==
=Hc3G
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Rework of system register accessors for system registers that are
directly writen to memory, so that sanitisation of the in-memory
value happens at the correct time (after the read, or before the
write). For convenience, RMW-style accessors are also provided.
- Multiple fixes for the so-called "arch-timer-edge-cases' selftest,
which was always broken.
x86:
- Make KVM_PRE_FAULT_MEMORY stricter for TDX, allowing userspace to
pass only the "untouched" addresses and flipping the shared/private
bit in the implementation.
- Disable SEV-SNP support on initialization failure
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/mmu: Reject direct bits in gpa passed to KVM_PRE_FAULT_MEMORY
KVM: x86/mmu: Embed direct bits into gpa for KVM_PRE_FAULT_MEMORY
KVM: SEV: Disable SEV-SNP support on initialization failure
KVM: arm64: selftests: Determine effective counter width in arch_timer_edge_cases
KVM: arm64: selftests: Fix xVAL init in arch_timer_edge_cases
KVM: arm64: selftests: Fix thread migration in arch_timer_edge_cases
KVM: arm64: selftests: Fix help text for arch_timer_edge_cases
KVM: arm64: Make __vcpu_sys_reg() a pure rvalue operand
KVM: arm64: Don't use __vcpu_sys_reg() to get the address of a sysreg
KVM: arm64: Add RMW specific sysreg accessor
KVM: arm64: Add assignment-specific sysreg accessor
If peeking a bunch of buffers, normally io_ring_buffers_peek() will
truncate the end buffer. This isn't optimal as presumably more data will
be arriving later, and hence it's better to stop with the last full
buffer rather than truncate the end buffer.
Cc: stable@vger.kernel.org
Fixes: 35c8711c8fc4 ("io_uring/kbuf: add helpers for getting/peeking multiple buffers")
Reported-by: Christian Mazakas <christian.mazakas@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmhI8cUACgkQxycdCkmx
i6djRxAAyPbJxvSFwBgGEh4EO+hMugezC74EAbat46Cs8PzMQjLEWEbOug2ukXbk
W+C1jRzSn3d3/j2glmjlmLUDHyY0OgGt0/is/X/DcPa/WynexvGMWkM8Umf+vwoV
G9jO0YdgtnXK/HnaZBKB138YXeSdj37iiA9vIIW4VcZuDZbn2CFer/XxMiN8A1Do
lDF69O9gEqbV/lGIUZdqJRqgaD+fiJAqRXSFp3SF44jx4Q2aCE07eqctLdAkxn9j
l5x3FYAfr2CSMzqebcdwibwH+11toVi5LyDBBSWHtmKdo1C4j8m4oMIkafDXHfCx
AM8EqrLdbaotftH5WhC3scoO6mbYVRhA/GnGp4nY/6+fVdwKbxy6Z2U22fo5+VVp
e390GhpAHH1fyBEpapHgndqGqNz5zCtlgRil3ySzp9M6rt+GpFxEeIPv2IPg8POo
Svw4TFyubrjUPlsY88JlKnsVEBbL0L8sRWsdDfxbZVOPmUQmdUjETxQ1ShCfmw5J
1w/W0PT8J95Qfm8t93pRFf5ZW6Uyot7R7J0N5oyeQJLT2wx5uPsH+Oaur7V+a5ZS
JZNWkuTubr8Muy6kMIVsJ5tOoFKQ5uSW85BKHwSBJgCeULkhOaeupU8VXwanySMu
6ftqLPLzWkrTqlX5BwjjsbwxijFn82FBkfcMy0WAQm3Oo/bFv3I=
=IqUE
-----END PGP SIGNATURE-----
Merge tag 'v6.16-p4' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"Fix a broken self-test in hkdf (new regression)"
* tag 'v6.16-p4' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: hkdf - move to late_initcall
As usual, highlighting the ones users have been noticing:
- Fix a small issue with has_case_insensitive not being propagated on
snapshot creation; this led to fsck errors, which we're harmless
because we're not using this flag yet (it's for overlayfs +
casefolding).
- Log the error being corrected in the journal when we're doing fsck
repair: this was one of the "lessons learned" from the i_nlink 0 ->
subvolume deletion bug, where reconstructing what had happened by
analyzing the journal was a bit more difficult than it needed to be.
- Don't schedule btree node scan to run in the superblock: this fixes a
regression from the 6.16 recovery passes rework, and let to it running
unnecessarily.
The real issue here is that we don't have online, "self healing" style
topology repair yet: topology repair currently has to run before we go
RW, which means that we may schedule it unnecessarily after a
transient error. This will be fixed in the future.
- We now track, in btree node flags, the reason it was scheduled to be
rewritten. We discovered a deadlock in recovery when many btree nodes
need to be rewritten because they're degraded: fully fixing this will
take some work but it's now easier to see what's going on.
For the bug report where this came up, a device had been kicked RO due
to transient errors: manually setting it back to RW was sufficient to
allow recovery to succeed.
- Mark a few more fsck errors as autofix: as a reminder to users, please
do keep reporting cases where something needs to be repaired and is
not repaired automatically (i.e. cases where -o fix_errors or fsck -y
is required).
- rcu_pending.c now works with PREEMPT_RT
- 'bcachefs device add', then umount, then remount wasn't working - we
now emit a uevent so that the new device's new superblock is correctly
picked up
- Assorted repair fixes: btree node scan will no longer incorrectly
update sb->version_min,
- Assorted syzbot fixes
-----BEGIN PGP SIGNATURE-----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=hPjd
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2025-06-12' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"As usual, highlighting the ones users have been noticing:
- Fix a small issue with has_case_insensitive not being propagated on
snapshot creation; this led to fsck errors, which we're harmless
because we're not using this flag yet (it's for overlayfs +
casefolding).
- Log the error being corrected in the journal when we're doing fsck
repair: this was one of the "lessons learned" from the i_nlink 0 ->
subvolume deletion bug, where reconstructing what had happened by
analyzing the journal was a bit more difficult than it needed to
be.
- Don't schedule btree node scan to run in the superblock: this fixes
a regression from the 6.16 recovery passes rework, and let to it
running unnecessarily.
The real issue here is that we don't have online, "self healing"
style topology repair yet: topology repair currently has to run
before we go RW, which means that we may schedule it unnecessarily
after a transient error. This will be fixed in the future.
- We now track, in btree node flags, the reason it was scheduled to
be rewritten. We discovered a deadlock in recovery when many btree
nodes need to be rewritten because they're degraded: fully fixing
this will take some work but it's now easier to see what's going
on.
For the bug report where this came up, a device had been kicked RO
due to transient errors: manually setting it back to RW was
sufficient to allow recovery to succeed.
- Mark a few more fsck errors as autofix: as a reminder to users,
please do keep reporting cases where something needs to be repaired
and is not repaired automatically (i.e. cases where -o fix_errors
or fsck -y is required).
- rcu_pending.c now works with PREEMPT_RT
- 'bcachefs device add', then umount, then remount wasn't working -
we now emit a uevent so that the new device's new superblock is
correctly picked up
- Assorted repair fixes: btree node scan will no longer incorrectly
update sb->version_min,
- Assorted syzbot fixes"
* tag 'bcachefs-2025-06-12' of git://evilpiepirate.org/bcachefs: (23 commits)
bcachefs: Don't trace should_be_locked unless changing
bcachefs: Ensure that snapshot creation propagates has_case_insensitive
bcachefs: Print devices we're mounting on multi device filesystems
bcachefs: Don't trust sb->nr_devices in members_to_text()
bcachefs: Fix version checks in validate_bset()
bcachefs: ioctl: avoid stack overflow warning
bcachefs: Don't pass trans to fsck_err() in gc_accounting_done
bcachefs: Fix leak in bch2_fs_recovery() error path
bcachefs: Fix rcu_pending for PREEMPT_RT
bcachefs: Fix downgrade_table_extra()
bcachefs: Don't put rhashtable on stack
bcachefs: Make sure opts.read_only gets propagated back to VFS
bcachefs: Fix possible console lock involved deadlock
bcachefs: mark more errors autofix
bcachefs: Don't persistently run scan_for_btree_nodes
bcachefs: Read error message now prints if self healing
bcachefs: Only run 'increase_depth' for keys from btree node csan
bcachefs: Mark need_discard_freespace_key_bad autofix
bcachefs: Update /dev/disk/by-uuid on device add
bcachefs: Add more flags to btree nodes for rewrite reason
...
Stephen Rothwell reports htmldocs warning on ublk docs:
Documentation/block/ublk.rst:414: ERROR: Unexpected indentation. [docutils]
Fix the warning by separating sublists of auto buffer registration
fallback behavior from their appropriate parent list item.
Fixes: ff20c516485e ("ublk: document auto buffer registration(UBLK_F_AUTO_BUF_REG)")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20250612132638.193de386@canb.auug.org.au/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20250613023857.15971-1-bagasdotme@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This driver uses a mixture of ways to get the size of a PTE,
tegra_smmu_set_pde() did it as sizeof(*pd) which became wrong when pd
switched to a struct tegra_pd.
Switch pd back to a u32* in tegra_smmu_set_pde() so the sizeof(*pd)
returns 4.
Fixes: 50568f87d1e2 ("iommu/terga: Do not use struct page as the handle for as->pd memory")
Reported-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Closes: https://lore.kernel.org/all/62e7f7fe-6200-4e4f-ad42-d58ad272baa6@tecnico.ulisboa.pt/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Link: https://lore.kernel.org/r/0-v1-da7b8b3d57eb+ce-iommu_terga_sizeof_jgg@nvidia.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Similarly to 26064d3e2b4d ("block: fix adding folio to bio"), if
we attempt to add a folio that is larger than 4GB, we'll silently
truncate the offset and len. Widen the parameters to size_t, assert
that the length is less than 4GB and set the first page that contains
the interesting data rather than the first page of the folio.
Fixes: 26db5ee15851 (block: add a bvec_set_folio helper)
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20250612144255.2850278-1-willy@infradead.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It is possible for physically contiguous folios to have discontiguous
struct pages if SPARSEMEM is enabled and SPARSEMEM_VMEMMAP is not.
This is correctly handled by folio_page_idx(), so remove this open-coded
implementation.
Fixes: 640d1930bef4 (block: Add bio_for_each_folio_all())
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20250612144126.2849931-1-willy@infradead.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Removes MSI-X from the interrupt request path, as the DMA engine used by
the SPI controller does not support MSI-X interrupts.
Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Link: https://patch.msgid.link/20250612023059.71726-1-thangaraj.s@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
