Pull dma-maping fixes from Marek Szyprowski:
- avoid unused variable warnings (Arnd Bergmann, Marek Szyprowski)
- add runtume warnings and debug messages for devices with limited DMA
capabilities (Balbir Singh, Chen-Yu Tsai)
* tag 'dma-mapping-6.15-2025-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-coherent: Warn if OF reserved memory is beyond current coherent DMA mask
dma-mapping: Fix warning reported for missing prototype
dma-mapping: avoid potential unused data compilation warning
dma/mapping.c: dev_dbg support for dma_addressing_limited
dma/contiguous: avoid warning about unused size_bytes
Pull xfs fixes from Carlos Maiolino:
"This contains a fix for a build failure on some 32-bit architectures
and a warning generating docs"
* tag 'xfs-fixes-6.15-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: remove duplicate Zoned Filesystems sections in admin-guide
XFS: fix zoned gc threshold math for 32-bit arches
When building the latest samples/bpf on LoongArch Fedora
make M=samples/bpf
There are compilation errors as follows:
In file included from ./linux/samples/bpf/sockex2_kern.c:2:
In file included from ./include/uapi/linux/in.h:25:
In file included from ./include/linux/socket.h:8:
In file included from ./include/linux/uio.h:9:
In file included from ./include/linux/thread_info.h:60:
In file included from ./arch/loongarch/include/asm/thread_info.h:15:
In file included from ./arch/loongarch/include/asm/processor.h:13:
In file included from ./arch/loongarch/include/asm/cpu-info.h:11:
./arch/loongarch/include/asm/loongarch.h:13:10: fatal error: 'larchintrin.h' file not found
^~~~~~~~~~~~~~~
1 error generated.
larchintrin.h is included in /usr/lib64/clang/14.0.6/include,
and the header file location is specified at compile time.
Test on LoongArch Fedora:
https://github.com/fedora-remix-loongarch/releases-info
Signed-off-by: Haoran Jiang <jianghaoran@kylinos.cn>
Signed-off-by: zhangxi <zhangxi@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250425095042.838824-1-jianghaoran@kylinos.cn
During CPU hotunplug events (such as those occurring during
suspend/resume cycles), platform firmware may modify the CPU boost
state.
If boost was disabled prior to CPU removal, it correctly remains
disabled upon re-plug. However, if firmware re-enables boost while the
CPU is offline, the CPU may return with boost enabled—even if it was
originally disabled—once it is hotplugged back in. This leads to
inconsistent behavior and violates user or kernel policy expectations.
To maintain consistency, ensure the boost state is re-synchronized with
the kernel policy when a CPU is hotplugged back in.
Note: This re-synchronization is not necessary during the initial call
to ->init() for a CPU, as the cpufreq core handles it via
cpufreq_online(). At that point, acpi_cpufreq_driver.boost_enabled is
initialized to the value returned by boost_state(0).
Fixes: 2b16c63183 ("cpufreq: ACPI: Remove set_boost in acpi_cpufreq_cpu_init()")
Reported-by: Nicholas Chin <nic.c3.14@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220013
Tested-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/9c7de55fb06015c1b77e7dafd564b659838864e0.1745511526.git.viresh.kumar@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull bcachefs fixes from Kent Overstreet:
- Case insensitive directories now work
- Ciemap now correctly reports on unwritten pagecache data
- bcachefs tools 1.25.1 was incorrectly picking unaligned bucket sizes;
fix journal and write path bugs this uncovered
And assorted smaller fixes...
* tag 'bcachefs-2025-04-24' of git://evilpiepirate.org/bcachefs: (24 commits)
bcachefs: Rework fiemap transaction restart handling
bcachefs: add fiemap delalloc extent detection
bcachefs: refactor fiemap processing into extent helper and struct
bcachefs: track current fiemap offset in start variable
bcachefs: drop duplicate fiemap sync flag
bcachefs: Fix btree_iter_peek_prev() at end of inode
bcachefs: Make btree_iter_peek_prev() assert more precise
bcachefs: Unit test fixes
bcachefs: Print mount opts earlier
bcachefs: unlink: casefold d_invalidate
bcachefs: Fix casefold lookups
bcachefs: Casefold is now a regular opts.h option
bcachefs: Implement fileattr_(get|set)
bcachefs: Allocator now copes with unaligned buckets
bcachefs: Start copygc, rebalance threads earlier
bcachefs: Refactor bch2_run_recovery_passes()
bcachefs: bch2_copygc_wakeup()
bcachefs: Fix ref leak in write_super()
bcachefs: Change __journal_entry_close() assert to ERO
bcachefs: Ensure journal space is block size aligned
...
Brandon Kammerdiener says:
====================
This patchset fixes an endless loop condition that can occur in
bpf_for_each_hash_elem, causing the core to softlock. My understanding is
that a combination of RCU list deletion and insertion introduces the new
element after the iteration cursor and that there is a chance that an RCU
reader may in fact use this new element in iteration. The patch uses a
_safe variant of the macro which gets the next element to iterate before
executing the loop body for the current element.
I have also added a subtest in the for_each selftest that can trigger this
condition without the fix.
Changes since v2:
- Renaming and additional checks in selftests/bpf/prog_tests/for_each.c
Changes since v1:
- Added missing Signed-off-by lines to both patches
====================
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://patch.msgid.link/20250424153246.141677-1-brandon.kammerdiener@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The axis-fifo driver performs a full hardware reset (via
reset_ip_core()) in several error paths within the read and write
functions. This reset flushes both TX and RX FIFOs and resets the
AXI-Stream links.
Allow the user to handle the error without causing hardware disruption
or data loss in other FIFO paths.
Fixes: 4a965c5f89 ("staging: add driver for Xilinx AXI-Stream FIFO v4.1 IP core")
Cc: stable@vger.kernel.org
Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com>
Link: https://lore.kernel.org/r/20250419004306.669605-1-gshahrouzi@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove erroneous subtraction of 4 from the total FIFO depth read from
device tree. The stored depth is for checking against total capacity,
not initial vacancy. This prevented writes near the FIFO's full size.
The check performed just before data transfer, which uses live reads of
the TDFV register to determine current vacancy, correctly handles the
initial Depth - 4 hardware state and subsequent FIFO fullness.
Fixes: 4a965c5f89 ("staging: add driver for Xilinx AXI-Stream FIFO v4.1 IP core")
Cc: stable@vger.kernel.org
Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com>
Link: https://lore.kernel.org/r/20250419012937.674924-1-gshahrouzi@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The counter backwards may be observed in the PMI handler when
counters-snapshotting some non-precise events in the freq mode.
For the non-precise events, it's possible the counters-snapshotting
records a positive value for an overflowed PEBS event. Then the HW
auto-reload mechanism reset the counter to 0 immediately. Because the
pebs_event_reset is cleared in the freq mode, which doesn't set the
PERF_X86_EVENT_AUTO_RELOAD.
In the PMI handler, 0 will be read rather than the positive value
recorded in the counters-snapshotting record.
The counters-snapshotting case has to be specially handled. Since the
event value has been updated when processing the counters-snapshotting
record, only needs to set the new period for the counter via
x86_pmu_set_period().
Fixes: e02e9b0374 ("perf/x86/intel: Support PEBS counters snapshotting")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250424134718.311934-6-kan.liang@linux.intel.com
A warning in intel_pmu_lbr_counters_reorder() may be triggered by below
perf command.
perf record -e "{cpu-clock,cycles/call-graph="lbr"/}" -- sleep 1
It's because the group is mistakenly treated as a branch counter group.
The hw.flags of the leader are used to determine whether a group is a
branch counters group. However, the hw.flags is only available for a
hardware event. The field to store the flags is a union type. For a
software event, it's a hrtimer. The corresponding bit may be set if the
leader is a software event.
For a branch counter group and other groups that have a group flag
(e.g., topdown, PEBS counters snapshotting, and ACR), the leader must
be a X86 event. Check the X86 event before checking the flag.
The patch only fixes the issue for the branch counter group.
The following patch will fix the other groups.
There may be an alternative way to fix the issue by moving the hw.flags
out of the union type. It should work for now. But it's still possible
that the flags will be used by other types of events later. As long as
that type of event is used as a leader, a similar issue will be
triggered. So the alternative way is dropped.
Fixes: 3374491619 ("perf/x86/intel: Support branch counters logging")
Closes: https://lore.kernel.org/lkml/20250412091423.1839809-1-luogengkun@huaweicloud.com/
Reported-by: Luo Gengkun <luogengkun@huaweicloud.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250424134718.311934-2-kan.liang@linux.intel.com
For some SPI flash memory operations, dummy bytes are not mandatory. For
example, in Winbond SPINAND flash memory devices, the `write_cache` and
`update_cache` operation variants have zero dummy bytes. Calculating the
duration for SPI memory operations with zero dummy bytes causes
a divide error when `ncycles` is calculated in the
spi_mem_calc_op_duration().
Add changes to skip the 'ncylcles' calculation for zero dummy bytes.
Following divide error is fixed by this change:
Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI
...
? do_trap+0xdb/0x100
? do_error_trap+0x75/0xb0
? spi_mem_calc_op_duration+0x56/0xb0
? exc_divide_error+0x3b/0x70
? spi_mem_calc_op_duration+0x56/0xb0
? asm_exc_divide_error+0x1b/0x20
? spi_mem_calc_op_duration+0x56/0xb0
? spinand_select_op_variant+0xee/0x190 [spinand]
spinand_match_and_init+0x13e/0x1a0 [spinand]
spinand_manufacturer_match+0x6e/0xa0 [spinand]
spinand_probe+0x357/0x7f0 [spinand]
? kernfs_activate+0x87/0xd0
spi_mem_probe+0x7a/0xb0
spi_probe+0x7d/0x130
Fixes: 226d6cb3cb ("spi: spi-mem: Estimate the time taken by operations")
Suggested-by: Krishnamoorthi M <krishnamoorthi.m@amd.com>
Co-developed-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
Signed-off-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20250424121333.417372-1-Raju.Rangoju@amd.com
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, setxattrat(2) and getxattrat(2) are wrongly handling the
calls of the from setxattrat(AF_FDCWD, NULL, AT_EMPTY_PATH, ...) and
fail with -EBADF error instead of operating on CWD. Fix it.
Fixes: 6140be90ec ("fs/xattr: add *at family syscalls")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/20250424132246.16822-2-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
pipe_clear_nowait has two noinline macros, but we only need one.
I checked the whole tree, and this is the only occurrence:
$ grep -r "noinline .* noinline"
fs/splice.c:static noinline void noinline pipe_clear_nowait(struct file *file)
$
Fixes: 0f99fc513d ("splice: clear FMODE_NOWAIT on file if splice/vmsplice is used")
Signed-off-by: "T.J. Mercier" <tjmercier@google.com>
Link: https://lore.kernel.org/20250423180025.2627670-1-tjmercier@google.com
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The recent move of the bdev_statx call to the low-level vfs_getattr_nosec
helper caused it being used by devtmpfs, which leads to deadlocks in
md teardown due to the block device lookup and put interfering with the
unusual lifetime rules in md.
But as handle_remove only works on inodes created and owned by devtmpfs
itself there is no need to use vfs_getattr_nosec vs simply reading the
mode from the inode directly. Switch to that to avoid the bdev lookup
or any other unintentional side effect.
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reported-by: Xiao Ni <xni@redhat.com>
Fixes: 777d0961ff ("fs: move the bdex_statx call to vfs_getattr_nosec")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/20250423045941.1667425-1-hch@lst.de
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Xiao Ni <xni@redhat.com>
Tested-by: Ayush Jain <Ayush.jain3@amd.com>
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
After recent changes in the VM network stack, the host fails to
display the IP addresses of the VM. As a result the "IP Addresses"
column in the "Networking" tab in the Windows Hyper-V Manager is
empty. This is caused by a change in the expected output of the
"ip route show" command. Previously the gateway address was shown
in the third row. Now the gateway addresses might be split into
several lines of output. As a result, the string "ra" instead of
an IP address is sent to the host.
To me more specific, a VM with the wellknown wicked network
managing tool still shows the expected output in recent openSUSE
Tumbleweed snapshots:
ip a show dev uplink;ip -4 route show;ip -6 route show
2: uplink: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state ...
link/ether 00:15:5d:d0:93:08 brd ff:ff:ff:ff:ff:ff
inet 1.2.3.4/22 brd 1.2.3.255 scope global uplink
valid_lft forever preferred_lft forever
inet6 fe80::215:5dff:fed0:9308/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
default via 1.2.3.254 dev uplink proto dhcp
1.2.3.0/22 dev uplink proto kernel scope link src 1.2.3.4
fe80::/64 dev uplink proto kernel metric 256 pref medium
default via fe80::26fc:4e00:3b:74 dev uplink proto ra metric 1024 exp...
default via fe80::6a22:8e00:fb:14f8 dev uplink proto ra metric 1024 e...
A similar VM, but with NetworkManager as network managing tool:
ip a show dev eth0;ip -4 route show;ip -6 route show
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP...
link/ether 00:15:5d:d0:93:0b brd ff:ff:ff:ff:ff:ff
inet 1.2.3.8/22 brd 1.2.3.255 scope global dynamic noprefixroute ...
valid_lft 1022sec preferred_lft 1022sec
inet6 fe80::215:5dff:fed0:930b/64 scope link noprefixroute
valid_lft forever preferred_lft forever
default via 1.2.3.254 dev eth0 proto dhcp src 1.2.3.8 metric 100
1.2.3.0/22 dev eth0 proto kernel scope link src 1.2.3.8 metric 100
fe80::/64 dev eth0 proto kernel metric 1024 pref medium
default proto ra metric 20100 pref medium
nexthop via fe80::6a22:8e00:fb:14f8 dev eth0 weight 1
nexthop via fe80::26fc:4e00:3b:74 dev eth0 weight 1
Adjust the route parsing to use a single line for each line of
output. Also use a single shell invocation to retrieve both IPv4
and IPv6 information. The actual IP addresses are expected after
the "via" keyword.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Link: https://lore.kernel.org/r/20241202102235.9701-1-olaf@aepfle.de
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20241202102235.9701-1-olaf@aepfle.de>
Commit ddd0a42671 only increments scomp_scratch_users when it was 0,
causing a panic when using ipcomp:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 1 UID: 0 PID: 619 Comm: ping Tainted: G N 6.15.0-rc3-net-00032-ga79be02bba5c #41 PREEMPT(full)
Tainted: [N]=TEST
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
RIP: 0010:inflate_fast+0x5a2/0x1b90
[...]
Call Trace:
<IRQ>
zlib_inflate+0x2d60/0x6620
deflate_sdecompress+0x166/0x350
scomp_acomp_comp_decomp+0x45f/0xa10
scomp_acomp_decompress+0x21/0x120
acomp_do_req_chain+0x3e5/0x4e0
ipcomp_input+0x212/0x550
xfrm_input+0x2de2/0x72f0
[...]
Kernel panic - not syncing: Fatal exception in interrupt
Kernel Offset: disabled
---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
Instead, let's keep the old increment, and decrement back to 0 if the
scratch allocation fails.
Fixes: ddd0a42671 ("crypto: scompress - Fix scratch allocation failure handling")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We call io_uring_cmd_complete_in_task() to schedule task_work for handling
UBLK_U_IO_NEED_GET_DATA.
This way is really not necessary because the current context is exactly
the ublk queue context, so call ublk_dispatch_req() directly for handling
UBLK_U_IO_NEED_GET_DATA.
Fixes: 216c8f5ef0 ("ublk: replace monitor with cancelable uring_cmd")
Tested-by: Jared Holzman <jholzman@nvidia.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250425013742.1079549-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since the IMX (as in i.MX, the NXP SoCs) MAINTAINERS entry claims
everything that contains the name "imx", hanges to device tree
bindings for any Sony IMX image sensor are likely to be sent to the
maintainers listed therein. Add the missing exclude to fix that.
Fixes: da8b7f0fb0 ("MAINTAINERS: add all files matching "imx" and "mxs" to the IMX entry")
Suggested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Previously the offload of the rule with header rewrite and mirror to
both internal and external destinations is skipped if the encap entry
is not valid. But it shouldn't because driver will try to offload it
again if neighbor is updated and encap entry is valid, to replace the
old FTE added for slow path. But the extra split attr doesn't exist at
that time as the process is skipped, driver then fails to offload it.
To fix this issue, remove the checking and continue the attr process
if encap entry is invalid.
Fixes: b11bde5624 ("net/mlx5e: TC, Offload rewrite and mirror to both internal and external dests")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250423083611.324567-4-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Initialize the source MAC address when creating the default GID entry.
Since this entry is used only for loopback traffic, it only needs to
be a unicast address. A zeroed-out MAC address is sufficient for this
purpose.
Without this fix, random bits would be assigned as the source address.
If these bits formed a multicast address, the firmware would return an
error, preventing the user from switching to switchdev mode:
Error: mlx5_core: Failed setting eswitch to offloads.
kernel answers: Invalid argument
Fixes: 80f09dfc23 ("net/mlx5: Eswitch, enable RoCE loopback traffic")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250423083611.324567-3-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Symbolic (e.g. "vxlan") and custom (e.g. "tunnel_header_0") tunnels
cannot be combined, but the match params interface does not have fields
for matching on vxlan gbp. To match vxlan bgp, the tc_tun layer uses
tunnel_header_0.
Allow matching on both VNI and GBP by matching the VNI with a custom
tunnel header instead of the symbolic field name.
Matching solely on the VNI continues to use the symbolic field name.
Fixes: 74a778b4a6 ("net/mlx5: HWS, added definers handling")
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250423083611.324567-2-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move rx_lock from xsk_socket to xsk_buff_pool.
Fix synchronization for shared umem mode in
generic RX path where multiple sockets share
single xsk_buff_pool.
RX queue is exclusive to xsk_socket, while FILL
queue can be shared between multiple sockets.
This could result in race condition where two
CPU cores access RX path of two different sockets
sharing the same umem.
Protect both queues by acquiring spinlock in shared
xsk_buff_pool.
Lock contention may be minimized in the future by some
per-thread FQ buffering.
It's safe and necessary to move spin_lock_bh(rx_lock)
after xsk_rcv_check():
* xs->pool and spinlock_init is synchronized by
xsk_bind() -> xsk_is_bound() memory barriers.
* xsk_rcv_check() may return true at the moment
of xsk_release() or xsk_unbind_dev(),
however this will not cause any data races or
race conditions. xsk_unbind_dev() removes xdp
socket from all maps and waits for completion
of all outstanding rx operations. Packets in
RX path will either complete safely or drop.
Signed-off-by: Eryk Kubanski <e.kubanski@partner.samsung.com>
Fixes: bf0bdd1343 ("xdp: fix race on generic receive path")
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://patch.msgid.link/20250416101908.10919-1-e.kubanski@partner.samsung.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Restart handling in the previous patch was incorrect, so: move btree
operations into a separate helper, and run it with a lockrestart_do().
Additionally, clarify whether pagecache or the btree takes precedence.
Right now, the btree takes precedence: this is incorrect, but it's
needed to pass fstests. Add a giant comment explaining why.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bcachefs currently populates fiemap data from the extents btree.
This works correctly when the fiemap sync flag is provided, but if
not, it skips all delalloc extents that have not yet been flushed.
This is because delalloc extents from buffered writes are first
stored as reservation in the pagecache, and only become resident in
the extents btree after writeback completes.
Update the fiemap implementation to process holes between extents by
scanning pagecache for data, via seek data/hole. If a valid data
range is found over a hole in the extent btree, fake up an extent
key and flag the extent as delalloc for reporting to userspace.
Note that this does not necessarily change behavior for the case
where there is dirty pagecache over already written extents, where
when in COW mode, writeback will allocate new blocks for the
underlying ranges. The existing behavior is consistent with btrfs
and it is recommended to use the sync flag for the most up to date
extent state from fiemap.
Signed-off-by: Brian Foster <bfoster@redhat.com>
The bulk of the loop in bch2_fiemap() involves processing the
current extent key from the iter, including following indirections
and trimming the extent size and such. This patch makes a few
changes to reduce the size of the loop and facilitate future changes
to support delalloc extents.
Define a new bch_fiemap_extent structure to wrap the bkey buffer
that holds the extent key to report to userspace along with
associated fiemap flags. Update bch2_fill_extent() to take the
bch_fiemap_extent as a param instead of the individual fields.
Finally, lift the bulk of the extent processing into a
bch2_fiemap_extent() helper that takes the current key and formats
the bch_fiemap_extent appropriately for the fill function.
No functional changes intended by this patch.
Signed-off-by: Brian Foster <bfoster@redhat.com>
FIEMAP_FLAG_SYNC handling was deliberately moved into core code in
commit 45dd052e67 ("fs: handle FIEMAP_FLAG_SYNC in fiemap_prep"),
released in kernel v5.8. Update bcachefs accordingly.
Signed-off-by: Brian Foster <bfoster@redhat.com>
At the end of the inode, on an extents iterator, peek_slot() has to
advance to the next position to avoid returning a 0 size extent, which
is not allowed.
Changing iter->pos confuses peek_prev(), but we don't need to call
peek_slot() in this case.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The issue this assert is guarding against is that in
BTREE_ITER_filter_snapshots mode we only want to be iterating within a
single inode number - if we iterate into another inode number with keys
for a different snapshot tree, we'll loop arbitrarily long before
finding a key we can return.
This comes up in the unit tests, where we're using inode 0 for our test
keys.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Linus Torvalds