Merge series from Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>:
All the Qualcomm WCD codecs and WCD based codecs have lots of code in
common, resulting in lot of duplicate code.
This series is an attempt to clean some of this by moving the common
code to wcd-common library or to soundwire helper functions.
Currently I have done cleanups for 4 codecs wcd934x, wcd937x, wcd938x
and wcd939x, however any new Qualcomm codecs can avoid this duplication
by using the wcd-common library.
I have also added two helpers of_sdw_find_device_by_node() and
sdw_slave_get_current_bank() in soundwire layer for the codecs to use them,
this series was already acked by Soundwire maintainer Vinod.
As original cleanup series was depending on the new soundwire interfaces
I have combined both the series as they are cleaning up code
duplications.
As am touching the same codec drivers, 2 bug fixes are also added at the
start of the series.
There is still lot of code that is duplicate, but this is just a
starting point for such cleanups.
I have tested this on T14s, any testing is appreciated.
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
We would like to hide struct snd_soc_dapm_context from driver. So we need
cleanup code first. These are preparation for it.
In non-interleaved mode, several QMC channels are used in sync.
More details can be found in commit 188d9cae54 ("ASoC: fsl:
fsl_qmc_audio: Add support for non-interleaved mode.")
At the time being, an interrupt is requested on each channel to
perform capture/playback completion, allthough the completion is
really performed only once all channels have completed their work.
This leads to a lot more interrupts than really needed. Looking at
/proc/interrupts shows ~3800 interrupts per second when using
4 capture and 4 playback devices with 5ms periods while
only 1600 (200 x 4 + 200 x 4) periods are processed during one second.
The QMC channels work in sync, the one started first is the one
finishing first and the one started last is the one finishing last,
so when the last one finishes it is guaranteed that the other ones are
finished as well. Therefore only request completion processing on the
last QMC channel.
On my board with the above exemple, on a kernel started with
'threadirqs' option, the QMC irq thread uses 16% CPU time with this
patch while it uses 26% CPU time without this patch.
Acked-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://patch.msgid.link/bbd5167d190bbb45c3a4cd6ef2dece8817e0cc1e.1758209158.git.christophe.leroy@csgroup.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix a potential integer overflow vulnerability in trace_filter_parse()
where the allocation size calculation could overflow.
The issue occurs when:
1. capacity is calculated by adding TRACE_FILTER_ELEMENTS_PER_ENTRY in a
loop for each entry found in the input string.
2. capacity * sizeof(**out) multiplication could overflow if many
entries are present in the input.
3. This results in a smaller allocation than expected, leading to
potential buffer overflow.
Replace kmalloc() with kmalloc_array() which provides built-in overflow
checking and will safely fail the allocation if overflow would occur,
preventing memory corruption.
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Link: https://patch.msgid.link/20250909225111.3740029-1-samasth.norway.ananda@oracle.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because struct snd_soc_dapm_context is soc-dapm framework specific, user
driver don't need to access its member directly, we would like to hide
them. struct snd_soc_dapm_context will be removed from header in the
future.
Many drivers are directly setting dapm->idle_bias, but it will be
impossible soon. adds snd_soc_dapm_set_idle_bias() for them.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87zfbavllj.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because struct snd_soc_dapm_context is soc-dapm framework specific, user
driver don't need to access its member directly, we would like to hide
them. struct snd_soc_dapm_context will be removed from header in the
future.
Many drivers are directly using dapm->idle_bias, but it should get it
via get_idle_bias() function. Makes it as global function.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/871pomx062.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because struct snd_soc_dapm_context is soc-dapm framework specific, user
driver don't need to access its member directly, we would like to hide
them. struct snd_soc_dapm_context will be removed from header in the
future.
Current dapm of card/component are using "instance", but it will be
"pointer" if snd_soc_dapm_context was removed from header.
snd_soc_card_to_dapm() is needed to switch to the new style while
maintaining compatibility
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/877byex06i.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because struct snd_soc_dapm_context is soc-dapm framework specific, user
driver don't need to access its member directly, we would like to hide
them. struct snd_soc_dapm_context will be removed from header in the
future.
Current dapm of card/component are using "instance", but it will be
"pointer" if snd_soc_dapm_context was removed from header.
snd_soc_component_to_dapm() is needed to switch to the new style while
maintaining compatibility
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/878qiux06m.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because struct snd_soc_dapm_context is soc-dapm framework specific, user
driver don't need to access its member directly, we would like to hide
them. struct snd_soc_dapm_context will be removed from header in the
future.
Now, snd_soc_dapm_to_component() (A) will convert dapm to component by
container_of() (a).
(A) static inline struct snd_soc_component *snd_soc_dapm_to_component(
struct snd_soc_dapm_context *dapm)
{
(a) return container_of(dapm, struct snd_soc_component, dapm);
}
dapm of component works, but dapm of card will be "unknown" pointer
(= not NULL), because (a) is using "container_of()".
OTOH, ASoC will call snd_soc_dapm_init() (X) to initialize dapm, and
it will be called from snd_soc_bind_card() (p) (for card) or
soc_probe_component() (q) (for component) with component pointer.
(p) static int snd_soc_bind_card(...)
{
...
(X) snd_soc_dapm_init(..., NULL);
... ^^^^
}
(q) static int soc_probe_component(...)
{
...
(X) snd_soc_dapm_init(..., component);
... ^^^^^^^^^
}
And snd_soc_dapm_init() (X) will fill dapm->component (x)
(X) void snd_soc_dapm_init(..., component, ...)
{
...
(x) dapm->component = component;
...
}
We can simply use dapm->component in snd_soc_dapm_to_component() (A).
In this case, dapm of card (p) will be just NULL.
Use dapm->component instead of container_of().
The picky note can be removed by this patch.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87a53ax06q.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because struct snd_soc_dapm_context is soc-dapm framework specific, user
driver don't need to access its member directly, we would like to hide
them. struct snd_soc_dapm_context will be removed from header in the
future.
Some drivers need to get card from dapm (which will be removed).
We need such function. Add it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87bjnqx06v.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because struct snd_soc_dapm_context is soc-dapm framework specific, user
driver don't need to access its member directly, we would like to hide
them. struct snd_soc_dapm_context will be removed from header in the
future.
Some drivers need to get dev from dapm (which will be removed).
We need such function. Add it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87cy86x06z.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
This series adds handling for vendor-specific UEFI variables from Lenovo
and HP. These vendors will switch to using their UEFI variables instead
of the normal Cirrus Logic-defined mechanisms.
The model of speaker fitted (Speaker ID) is normally signaled by a GPIO,
and the driver is given access to this GPIO. Lenovo and HP will both stop
giving the driver access to the GPIO and instead the BIOS will create a
UEFI variable giving the value of the GPIO.
HP will also start using their own UEFI variable to store amp calibration
data. The content of the variable is the same as the Cirrus Logic variable,
only the UEFI name and GUID are changed.
Change in v2:
Removed unused target_uid variable and code that set it in patch 6.
Richard Fitzgerald (6):
ASoC: cs-amp-lib: Rename defines for Cirrus Logic EFI
ASoC: cs-amp-lib: Add handling for Lenovo and HP UEFI speaker ID
ASoC: cs35l56: Check for vendor-specific speaker ID value
ASoC: cs-amp-lib-test: Add tests for cs_amp_get_vendor_spkid()
ASoC: cs-amp-lib: Add HP-specific EFI variable for calibration data
ASoC: cs-amp-lib-test: Add test for getting cal data from HP EFI
include/sound/cs-amp-lib.h | 1 +
sound/soc/codecs/cs-amp-lib-test.c | 252 ++++++++++++++++++++++++++++-
sound/soc/codecs/cs-amp-lib.c | 139 +++++++++++++++-
sound/soc/codecs/cs35l56-shared.c | 12 +-
4 files changed, 395 insertions(+), 9 deletions(-)
--
2.39.5
Merge series from Alexey Klimov <alexey.klimov@linaro.org>:
PMICs like PM4125 have in-built audio codec IC. The series here
adds support for this codec driver: DT bindings and codec driver
itself that consists mainly of two parts: soundwire devices and
codec part itself.
This audio codec can be found on platforms like QCM2290 and
on Qualcomm QRB2210 RB1 board.
We are working on this together with Srini
(srinivas.kandagatla@oss.qualcomm.com or srini@kernel.org).
This driver also has a bit limited support for concurrent playback,
since line out path is connected to left input channel.
Pull generic phy driver fixes from Vinod Koul:
- Qualcomm repeater override properties, qmp pcie bindings fix for
clocks and initialization sequence for firmware power down case
- Marvell comphy bindings clock and child node constraints
- Tegra xusb device reference leaks fix
- TI omap usb device ref leak on unbind and RGMII IS settings fix
* tag 'phy-fix-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: qcom: qmp-pcie: Fix PHY initialization when powered down by firmware
phy: ti: gmii-sel: Always write the RGMII ID setting
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings
phy: ti-pipe3: fix device leak at unbind
phy: ti: omap-usb2: fix device leak at unbind
phy: tegra: xusb: fix device and OF node leak at probe
dt-bindings: phy: marvell,comphy-cp110: Fix clock and child node constraints
phy: qualcomm: phy-qcom-eusb2-repeater: fix override properties
Pull tty/serial fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.17-rc6 that
resolve some reported problems. Included in here are:
- 8250 driver dt bindings fixes
- broadcom serial driver binding fixes
- hvc_console bugfix
- xilinx serial driver bugfix
- sc16is7xx serial driver bugfix
All of these have been in linux-next for the past week with no
reported issues"
* tag 'tty-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: xilinx_uartps: read reg size from DTS
tty: hvc_console: Call hvc_kick in hvc_write unconditionally
dt-bindings: serial: 8250: allow "main" and "uart" as clock names
dt-bindings: serial: 8250: move a constraint
dt-bindings: serial: brcm,bcm7271-uart: Constrain clocks
serial: sc16is7xx: fix bug in flow control levels init
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 6.17-rc6.
Included in here are:
- new usb-serial driver device ids
- dummy-hcd locking bugfix for rt-enabled systems (which is crazy,
but people have odd testing requirements at times...)
- xhci driver bugfixes for reported issues
- typec driver bugfix
- midi2 gadget driver bugfixes
- usb core sysfs file regression fix from -rc1
All of these, except for the last usb sysfs file fix, have been in
linux-next with no reported issues. The sysfs fix was added to the
tree on Friday, and is "obviously correct" and should not have any
problems either, it just didn't have any time for linux-next to pick
up (0-day had no problems with it)"
* tag 'usb-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: core: remove the move buf action
usb: gadget: midi2: Fix MIDI2 IN EP max packet size
usb: gadget: midi2: Fix missing UMP group attributes initialization
usb: typec: tcpm: properly deliver cable vdms to altmode drivers
USB: gadget: dummy-hcd: Fix locking bug in RT-enabled kernels
xhci: fix memory leak regression when freeing xhci vdev devices depth first
xhci: dbc: Fix full DbC transfer ring after several reconnects
xhci: dbc: decouple endpoint allocation from initialization
USB: serial: option: add Telit Cinterion LE910C4-WWX new compositions
USB: serial: option: add Telit Cinterion FN990A w/audio compositions
Pull x86 fixes from Ingo Molnar:
"Fix a CPU topology parsing bug on AMD guests, and address
a lockdep warning in the resctrl filesystem"
* tag 'x86-urgent-2025-09-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
fs/resctrl: Eliminate false positive lockdep warning when reading SNC counters
x86/cpu/topology: Always try cpu_parse_topology_ext() on AMD/Hygon
Pull timer fix from Ingo Molnar:
"Fix a lost-timeout CPU hotplug bug in the hrtimer code, which can
trigger with certain hardware configs and regular HZ"
* tag 'timers-urgent-2025-09-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimers: Unconditionally update target CPU base after offline timer migration
Pull input fixes from Dmitry Torokhov:
- a quirk to i8042 for yet another TUXEDO laptop
- a fix to mtk-pmic-keys driver to properly handle MT6359
- a fix to iqs7222 driver to only enable proximity interrupt
if it is mapped to a key or a switch event
- an update to xpad controller driver to recognize Flydigi Apex 5
controller
- an update to maintainers file to drop bounding entry for Melfas
touch controller
* tag 'input-for-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
MAINTAINERS: Input: Drop melfas-mip4 section
Input: mtk-pmic-keys - MT6359 has a specific release irq
Input: i8042 - add TUXEDO InfinityBook Pro Gen10 AMD to i8042 quirk table
Input: iqs7222 - avoid enabling unused interrupts
Input: xpad - add support for Flydigi Apex 5
Mark Brown