commit 71af915650 upstream.
The 12/24hr flag in the RX-8035 can be found in the hour register,
instead of the CTRL1 on the RX-8025. This was overlooked when
support for the RX-8035 was added, and was causing read errors when
the hour register 'overflowed'.
To deal with the relevant register not always being visible in
the relevant functions, determine the 12/24 mode at startup and
store it in the driver state.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Fixes: f120e2e33a ("rtc: rx8025: implement RX-8035 support")
Cc: stable@vger.kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220706074236.24011-1-matt@traverse.com.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da6d2128e5 upstream.
The cpu_ops_spinwait is used in a couple of places in arch/riscv
and is causing a sparse warning due to no declaration. Add this
to <asm/cpu_ops.h> with the others to fix the following:
arch/riscv/kernel/cpu_ops_spinwait.c:16:29: warning: symbol 'cpu_ops_spinwait' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@sifive.com>
Link: https://lore.kernel.org/r/20220714071811.187491-1-ben.dooks@sifive.com
[Palmer: Drop the extern from cpu_ops.c]
Fixes: 2ffc48fc70 ("RISC-V: Move spinwait booting method to its own config")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e4aa991c05 upstream.
Running sparse shows cpu_ops_spinwait.c is missing two definitions
found in head.h, so include it to stop the following warnings:
arch/riscv/kernel/cpu_ops_spinwait.c:15:6: warning: symbol '__cpu_spinwait_stack_pointer' was not declared. Should it be static?
arch/riscv/kernel/cpu_ops_spinwait.c:16:6: warning: symbol '__cpu_spinwait_task_pointer' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@sifive.com>
Link: https://lore.kernel.org/r/20220713215306.94675-1-ben.dooks@sifive.com
Fixes: c78f94f35c ("RISC-V: Use __cpu_up_stack/task_pointer only for spinwait method")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a208acf0ea upstream.
The PLIC integrated on the Vic_U7_Core integrated on the StarFive
JH7100 SoC actually supports 133 external interrupts. 127 of these
are exposed to the outside world; the remainder are used by other
devices that are part of the core-complex such as the L2 cache
controller. But all 133 interrupts are external interrupts as far
as the PLIC is concerned. Fix the property so that the driver can
manage these additional interrupts, which is important since the
interrupts for the L2 cache controller are enabled by default.
Fixes: ec85362fb1 ("RISC-V: Add initial StarFive JH7100 device tree")
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220707185529.19509-1-kettenis@openbsd.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b60cf8e59e upstream.
Fix device tree schema validation error messages for the SiFive
Unmatched: ' cache-sets:0:0: 1024 was expected'.
The existing bindings allow for just 1024 cache-sets but the fu740 on
Unmatched the has 2048 cache-sets. The ISA itself permits any arbitrary
power of two, however this is not supported by dt-schema. The RTL for
the IP, to which the number of cache-sets is a tunable parameter, has
been released publicly so speculatively adding a small number of
"reasonable" values seems unwise also.
Instead, as the binding only supports two distinct controllers: add 2048
and explicitly lock it to the fu740's l2 cache while limiting 1024 to
the l2 cache on the fu540.
Fixes: af951c3a11 ("dt-bindings: riscv: Update l2 cache DT documentation to add support for SiFive FU740")
Reported-by: Atul Khare <atulkhare@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220803185359.942928-1-mail@conchuod.ie
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3dbe582940 upstream.
In riscv the process of uprobe going to clear spie before exec
the origin insn,and set spie after that.But When access the page
which origin insn has been placed a page fault may happen and
irq was disabled in arch_uprobe_pre_xol function,It cause a WARN
as follows.
There is no need to clear/set spie in arch_uprobe_pre/post/abort_xol.
We can just remove it.
[ 31.684157] BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1488
[ 31.684677] in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 76, name: work
[ 31.684929] preempt_count: 0, expected: 0
[ 31.685969] CPU: 2 PID: 76 Comm: work Tainted: G
[ 31.686542] Hardware name: riscv-virtio,qemu (DT)
[ 31.686797] Call Trace:
[ 31.687053] [<ffffffff80006442>] dump_backtrace+0x30/0x38
[ 31.687699] [<ffffffff80812118>] show_stack+0x40/0x4c
[ 31.688141] [<ffffffff8081817a>] dump_stack_lvl+0x44/0x5c
[ 31.688396] [<ffffffff808181aa>] dump_stack+0x18/0x20
[ 31.688653] [<ffffffff8003e454>] __might_resched+0x114/0x122
[ 31.688948] [<ffffffff8003e4b2>] __might_sleep+0x50/0x7a
[ 31.689435] [<ffffffff80822676>] down_read+0x30/0x130
[ 31.689728] [<ffffffff8000b650>] do_page_fault+0x166/x446
[ 31.689997] [<ffffffff80003c0c>] ret_from_exception+0x0/0xc
Fixes: 74784081aa ("riscv: Add uprobes supported")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220721065820.245755-1-zouyipeng@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6431e92fc8 upstream.
For all syscalls in 32-bit compat mode on 64-bit kernels the upper
32-bits of the 64-bit registers are zeroed out, so a negative 32-bit
signed value will show up as positive 64-bit signed value.
This behaviour breaks the io_pgetevents_time64() syscall which expects
signed 64-bit values for the "min_nr" and "nr" parameters.
Fix this by switching to the compat_sys_io_pgetevents_time64() syscall,
which uses "compat_long_t" types for those parameters.
Cc: <stable@vger.kernel.org> # v5.1+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cab56b51ec upstream.
Fix the output of /proc/iomem to show the real hardware device name
including the pa_pathname, e.g. "Merlin 160 Core Centronics [8:16:0]".
Up to now only the pa_pathname ("[8:16.0]") was shown.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dd524b7f31 upstream.
Some code paths cannot guarantee the inode have any dentry alias. So
WARN_ON() all !dentry may flood the kernel logs.
For example, when an overlayfs inode is watched by inotifywait (1), and
someone is trying to read the /proc/$(pidof inotifywait)/fdinfo/INOTIFY_FD,
at that time if the dentry has been reclaimed by kernel (such as
echo 2 > /proc/sys/vm/drop_caches), there will be a WARN_ON(). The
printed call stack would be like:
? show_mark_fhandle+0xf0/0xf0
show_mark_fhandle+0x4a/0xf0
? show_mark_fhandle+0xf0/0xf0
? seq_vprintf+0x30/0x50
? seq_printf+0x53/0x70
? show_mark_fhandle+0xf0/0xf0
inotify_fdinfo+0x70/0x90
show_fdinfo.isra.4+0x53/0x70
seq_show+0x130/0x170
seq_read+0x153/0x440
vfs_read+0x94/0x150
ksys_read+0x5f/0xe0
do_syscall_64+0x59/0x1e0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
So let's drop WARN_ON() to avoid kernel log flooding.
Reported-by: Hongbo Yin <yinhongbo@bytedance.com>
Signed-off-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
Signed-off-by: Tianci Zhang <zhangtianci.1997@bytedance.com>
Fixes: 8ed5eec9d6 ("ovl: encode pure upper file handles")
Cc: <stable@vger.kernel.org> # v4.16
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 13dc15a3f5 upstream.
For some sev ioctl interfaces, input may be passed that is less than or
equal to SEV_FW_BLOB_MAX_SIZE, but larger than the data that PSP
firmware returns. In this case, kmalloc will allocate memory that is the
size of the input rather than the size of the data. Since PSP firmware
doesn't fully overwrite the buffer, the sev ioctl interfaces with the
issue may return uninitialized slab memory.
Currently, all of the ioctl interfaces in the ccp driver are safe, but
to prevent future problems, change all ioctl interfaces that allocate
memory with kmalloc to use kzalloc and memset the data buffer to zero
in sev_ioctl_do_platform_status.
Fixes: 38103671aa ("crypto: ccp: Use the stack and common buffer for status commands")
Fixes: e799035609 ("crypto: ccp: Implement SEV_PEK_CSR ioctl command")
Fixes: 76a2b524a4 ("crypto: ccp: Implement SEV_PDH_CERT_EXPORT ioctl command")
Fixes: d6112ea0cb ("crypto: ccp - introduce SEV_GET_ID2 command")
Cc: stable@vger.kernel.org
Reported-by: Andy Nguyen <theflow@google.com>
Suggested-by: David Rientjes <rientjes@google.com>
Suggested-by: Peter Gonda <pgonda@google.com>
Signed-off-by: John Allen <john.allen@amd.com>
Reviewed-by: Peter Gonda <pgonda@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c3497fd009 upstream.
Unlike other copying operations on ITER_PIPE, copy_mc_to_iter() can
result in a short copy. In that case we need to trim the unused
buffers, as well as the length of partially filled one - it's not
enough to set ->head, ->iov_offset and ->count to reflect how
much had we copied. Not hard to fix, fortunately...
I'd put a helper (pipe_discard_from(pipe, head)) into pipe_fs_i.h,
rather than iov_iter.c - it has nothing to do with iov_iter and
having it will allow us to avoid an ugly kludge in fs/splice.c.
We could put it into lib/iov_iter.c for now and move it later,
but I don't see the point going that way...
Cc: stable@kernel.org # 4.19+
Fixes: ca146f6f09 "lib/iov_iter: Fix pipe handling in _copy_to_iter_mcsafe()"
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7b960c967f upstream.
Commit 05b35e7eb9 ("smsc95xx: add phylib support") amended
smsc95xx_resume() to call phy_init_hw(). That function waits for the
device to runtime resume even though it is placed in the runtime resume
path, causing a deadlock.
The problem is that phy_init_hw() calls down to smsc95xx_mdiobus_read(),
which never uses the _nopm variant of usbnet_read_cmd().
Commit b4df480f68 ("usbnet: smsc95xx: add reset_resume function with
reset operation") causes a similar deadlock on resume if the device was
already runtime suspended when entering system sleep:
That's because the commit introduced smsc95xx_reset_resume(), which
calls down to smsc95xx_reset(), which neglects to use _nopm accessors.
Fix by auto-detecting whether a device access is performed by the
suspend/resume task_struct and use the _nopm variant if so. This works
because the PM core guarantees that suspend/resume callbacks are run in
task context.
Stacktrace for posterity:
INFO: task kworker/2:1:49 blocked for more than 122 seconds.
Workqueue: usb_hub_wq hub_event
schedule
rpm_resume
__pm_runtime_resume
usb_autopm_get_interface
usbnet_read_cmd
__smsc95xx_read_reg
__smsc95xx_phy_wait_not_busy
__smsc95xx_mdio_read
smsc95xx_mdiobus_read
__mdiobus_read
mdiobus_read
smsc_phy_reset
phy_init_hw
smsc95xx_resume
usb_resume_interface
usb_resume_both
usb_runtime_resume
__rpm_callback
rpm_callback
rpm_resume
__pm_runtime_resume
usb_autoresume_device
hub_event
process_one_work
Fixes: b4df480f68 ("usbnet: smsc95xx: add reset_resume function with reset operation")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v3.16+
Cc: Andre Edich <andre.edich@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a69e617e53 upstream.
usbnet uses the work usbnet_deferred_kevent() to perform tasks which may
sleep. On disconnect, completion of the work was originally awaited in
->ndo_stop(). But in 2003, that was moved to ->disconnect() by historic
commit "[PATCH] USB: usbnet, prevent exotic rtnl deadlock":
https://git.kernel.org/tglx/history/c/0f138bbfd83c
The change was made because back then, the kernel's workqueue
implementation did not allow waiting for a single work. One had to wait
for completion of *all* work by calling flush_scheduled_work(), and that
could deadlock when waiting for usbnet_deferred_kevent() with rtnl_mutex
held in ->ndo_stop().
The commit solved one problem but created another: It causes a
use-after-free in USB Ethernet drivers aqc111.c, asix_devices.c,
ax88179_178a.c, ch9200.c and smsc75xx.c:
* If the drivers receive a link change interrupt immediately before
disconnect, they raise EVENT_LINK_RESET in their (non-sleepable)
->status() callback and schedule usbnet_deferred_kevent().
* usbnet_deferred_kevent() invokes the driver's ->link_reset() callback,
which calls netif_carrier_{on,off}().
* That in turn schedules the work linkwatch_event().
Because usbnet_deferred_kevent() is awaited after unregister_netdev(),
netif_carrier_{on,off}() may operate on an unregistered netdev and
linkwatch_event() may run after free_netdev(), causing a use-after-free.
In 2010, usbnet was changed to only wait for a single instance of
usbnet_deferred_kevent() instead of *all* work by commit 23f333a2bf
("drivers/net: don't use flush_scheduled_work()").
Unfortunately the commit neglected to move the wait back to
->ndo_stop(). Rectify that omission at long last.
Reported-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/netdev/CAG48ez0MHBbENX5gCdHAUXZ7h7s20LnepBF-pa5M=7Bi-jZrEA@mail.gmail.com/
Reported-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/netdev/20220315113841.GA22337@pengutronix.de/
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/d1c87ebe9fc502bffcd1576e238d685ad08321e4.1655987888.git.lukas@wunner.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3866cba87d upstream.
There is no need to directly skip over to the SCROLL_REDRAW case while
the logo is still shown.
When using DRM, this change has no effect because the code will reach
the SCROLL_REDRAW case immediately anyway.
But if you run an accelerated fbdev driver and have
FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION enabled, console scrolling is
slowed down by factors so that it feels as if you use a 9600 baud
terminal.
So, drop those unnecessary checks and speed up fbdev console
acceleration during bootup.
Cc: stable@vger.kernel.org # v5.10+
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YpkYxk7wsBPx3po+@p100
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cad564ca55 upstream.
The user may use the fbcon=vc:<n1>-<n2> option to tell fbcon to take
over the given range (n1...n2) of consoles. The value for n1 and n2
needs to be a positive number and up to (MAX_NR_CONSOLES - 1).
The given values were not fully checked against those boundaries yet.
To fix the issue, convert first_fb_vc and last_fb_vc to unsigned
integers and check them against the upper boundary, and make sure that
first_fb_vc is smaller than last_fb_vc.
Cc: stable@vger.kernel.org # v4.19+
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YpkYRMojilrtZIgM@p100
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d5a8aa5d7d upstream.
If cooling_device_stats_setup() fails to create the stats object, it
must clear the last slot in cooling_device_attr_groups that was
initially empty (so as to make it possible to add stats attributes to
the cooling device attribute groups).
Failing to do so may cause the stats attributes to be created by
mistake for a device that doesn't have a stats object, because the
slot in question might be populated previously during the registration
of another cooling device.
Fixes: 8ea229511e ("thermal: Add cooling device's statistics in sysfs")
Reported-by: Di Shen <di.shen@unisoc.com>
Tested-by: Di Shen <di.shen@unisoc.com>
Cc: 4.17+ <stable@vger.kernel.org> # 4.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2ebff9c57 upstream.
If something manages to set the maximum file size to MAX_OFFSET+1, this
can cause the xfs and ext4 filesystems at least to become corrupt.
Ordinarily, the kernel protects against userspace trying this by
checking the value early in the truncate() and ftruncate() system calls
calls - but there are at least two places that this check is bypassed:
(1) Cachefiles will round up the EOF of the backing file to DIO block
size so as to allow DIO on the final block - but this might push
the offset negative. It then calls notify_change(), but this
inadvertently bypasses the checking. This can be triggered if
someone puts an 8EiB-1 file on a server for someone else to try and
access by, say, nfs.
(2) ksmbd doesn't check the value it is given in set_end_of_file_info()
and then calls vfs_truncate() directly - which also bypasses the
check.
In both cases, it is potentially possible for a network filesystem to
cause a disk filesystem to be corrupted: cachefiles in the client's
cache filesystem; ksmbd in the server's filesystem.
nfsd is okay as it checks the value, but we can then remove this check
too.
Fix this by adding a check to inode_newsize_ok(), as called from
setattr_prepare(), thereby catching the issue as filesystems set up to
perform the truncate with minimal opportunity for bypassing the new
check.
Fixes: 1f08c925e7 ("cachefiles: Implement backing file wrangling")
Fixes: f441584858 ("cifsd: add file operations")
Signed-off-by: David Howells <dhowells@redhat.com>
Reported-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: stable@kernel.org
Acked-by: Alexander Viro <viro@zeniv.linux.org.uk>
cc: Steve French <sfrench@samba.org>
cc: Hyunchul Lee <hyc.lee@gmail.com>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 901d3765fa upstream.
Commit 7e2175ebd6 ("KVM: x86: Fix recording of guest steal time
/ preempted status", 2021-11-11) open coded the previous call to
kvm_map_gfn, but in doing so it dropped the comparison between the cached
guest physical address and the one in the MSR. This cause an incorrect
cache hit if the guest modifies the steal time address while the memslots
remain the same. This can happen with kexec, in which case the steal
time data is written at the address used by the old kernel instead of
the old one.
While at it, rename the variable from gfn to gpa since it is a plain
physical address and not a right-shifted one.
Reported-by: Dave Young <ruyang@redhat.com>
Reported-by: Xiaoying Yan <yiyan@redhat.com>
Analyzed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: stable@vger.kernel.org
Fixes: 7e2175ebd6 ("KVM: x86: Fix recording of guest steal time / preempted status")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c3c28d24d9 upstream.
Commit 7e2175ebd6 ("KVM: x86: Fix recording of guest steal time
/ preempted status", 2021-11-11) open coded the previous call to
kvm_map_gfn, but in doing so it dropped the comparison between the cached
guest physical address and the one in the MSR. This cause an incorrect
cache hit if the guest modifies the steal time address while the memslots
remain the same. This can happen with kexec, in which case the preempted
bit is written at the address used by the old kernel instead of
the old one.
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: stable@vger.kernel.org
Fixes: 7e2175ebd6 ("KVM: x86: Fix recording of guest steal time / preempted status")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c3e0c8c2e8 upstream.
Fully re-evaluate whether or not MMIO caching can be enabled when SPTE
masks change; simply clearing enable_mmio_caching when a configuration
isn't compatible with caching fails to handle the scenario where the
masks are updated, e.g. by VMX for EPT or by SVM to account for the C-bit
location, and toggle compatibility from false=>true.
Snapshot the original module param so that re-evaluating MMIO caching
preserves userspace's desire to allow caching. Use a snapshot approach
so that enable_mmio_caching still reflects KVM's actual behavior.
Fixes: 8b9e74bfbf ("KVM: x86/mmu: Use enable_mmio_caching to track if MMIO caching is enabled")
Reported-by: Michael Roth <michael.roth@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: stable@vger.kernel.org
Tested-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Message-Id: <20220803224957.1285926-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0c29397ac1 upstream.
Disable SEV-ES if MMIO caching is disabled as SEV-ES relies on MMIO SPTEs
generating #NPF(RSVD), which are reflected by the CPU into the guest as
a #VC. With SEV-ES, the untrusted host, a.k.a. KVM, doesn't have access
to the guest instruction stream or register state and so can't directly
emulate in response to a #NPF on an emulated MMIO GPA. Disabling MMIO
caching means guest accesses to emulated MMIO ranges cause #NPF(!PRESENT),
and those flavors of #NPF cause automatic VM-Exits, not #VC.
Adjust KVM's MMIO masks to account for the C-bit location prior to doing
SEV(-ES) setup, and document that dependency between adjusting the MMIO
SPTE mask and SEV(-ES) setup.
Fixes: b09763da4d ("KVM: x86/mmu: Add module param to disable MMIO caching (for testing)")
Reported-by: Michael Roth <michael.roth@amd.com>
Tested-by: Michael Roth <michael.roth@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220803224957.1285926-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6c6ab524cf upstream.
Treat the NX bit as valid when using NPT, as KVM will set the NX bit when
the NX huge page mitigation is enabled (mindblowing) and trigger the WARN
that fires on reserved SPTE bits being set.
KVM has required NX support for SVM since commit b26a71a1a5 ("KVM: SVM:
Refuse to load kvm_amd if NX support is not available") for exactly this
reason, but apparently it never occurred to anyone to actually test NPT
with the mitigation enabled.
------------[ cut here ]------------
spte = 0x800000018a600ee7, level = 2, rsvd bits = 0x800f0000001fe000
WARNING: CPU: 152 PID: 15966 at arch/x86/kvm/mmu/spte.c:215 make_spte+0x327/0x340 [kvm]
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 10.48.0 01/27/2022
RIP: 0010:make_spte+0x327/0x340 [kvm]
Call Trace:
<TASK>
tdp_mmu_map_handle_target_level+0xc3/0x230 [kvm]
kvm_tdp_mmu_map+0x343/0x3b0 [kvm]
direct_page_fault+0x1ae/0x2a0 [kvm]
kvm_tdp_page_fault+0x7d/0x90 [kvm]
kvm_mmu_page_fault+0xfb/0x2e0 [kvm]
npf_interception+0x55/0x90 [kvm_amd]
svm_invoke_exit_handler+0x31/0xf0 [kvm_amd]
svm_handle_exit+0xf6/0x1d0 [kvm_amd]
vcpu_enter_guest+0xb6d/0xee0 [kvm]
? kvm_pmu_trigger_event+0x6d/0x230 [kvm]
vcpu_run+0x65/0x2c0 [kvm]
kvm_arch_vcpu_ioctl_run+0x355/0x610 [kvm]
kvm_vcpu_ioctl+0x551/0x610 [kvm]
__se_sys_ioctl+0x77/0xc0
__x64_sys_ioctl+0x1d/0x20
do_syscall_64+0x44/0xa0
entry_SYSCALL_64_after_hwframe+0x46/0xb0
</TASK>
---[ end trace 0000000000000000 ]---
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220723013029.1753623-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2626206963 upstream.
When injecting a #GP on LLDT/LTR due to a non-canonical LDT/TSS base, set
the error code to the selector. Intel SDM's says nothing about the #GP,
but AMD's APM explicitly states that both LLDT and LTR set the error code
to the selector, not zero.
Note, a non-canonical memory operand on LLDT/LTR does generate a #GP(0),
but the KVM code in question is specific to the base from the descriptor.
Fixes: e37a75a13c ("KVM: x86: Emulator ignores LDTR/TR extended base on LLDT/LTR")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20220711232750.1092012-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c7d855c2af upstream.
Inject a #UD if L1 attempts VMXON with a CR0 or CR4 that is disallowed
per the associated nested VMX MSRs' fixed0/1 settings. KVM cannot rely
on hardware to perform the checks, even for the few checks that have
higher priority than VM-Exit, as (a) KVM may have forced CR0/CR4 bits in
hardware while running the guest, (b) there may incompatible CR0/CR4 bits
that have lower priority than VM-Exit, e.g. CR0.NE, and (c) userspace may
have further restricted the allowed CR0/CR4 values by manipulating the
guest's nested VMX MSRs.
Note, despite a very strong desire to throw shade at Jim, commit
70f3aac964 ("kvm: nVMX: Remove superfluous VMX instruction fault checks")
is not to blame for the buggy behavior (though the comment...). That
commit only removed the CR0.PE, EFLAGS.VM, and COMPATIBILITY mode checks
(though it did erroneously drop the CPL check, but that has already been
remedied). KVM may force CR0.PE=1, but will do so only when also
forcing EFLAGS.VM=1 to emulate Real Mode, i.e. hardware will still #UD.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216033
Fixes: ec378aeef9 ("KVM: nVMX: Implement VMXON and VMXOFF")
Reported-by: Eric Li <ercli@ucdavis.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220607213604.3346000-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca58f3aa53 upstream.
Check that the guest (L2) and host (L1) CR4 values that would be loaded
by nested VM-Enter and VM-Exit respectively are valid with respect to
KVM's (L0 host) allowed CR4 bits. Failure to check KVM reserved bits
would allow L1 to load an illegal CR4 (or trigger hardware VM-Fail or
failed VM-Entry) by massaging guest CPUID to allow features that are not
supported by KVM. Amusingly, KVM itself is an accomplice in its doom, as
KVM adjusts L1's MSR_IA32_VMX_CR4_FIXED1 to allow L1 to enable bits for
L2 based on L1's CPUID model.
Note, although nested_{guest,host}_cr4_valid() are _currently_ used if
and only if the vCPU is post-VMXON (nested.vmxon == true), that may not
be true in the future, e.g. emulating VMXON has a bug where it doesn't
check the allowed/required CR0/CR4 bits.
Cc: stable@vger.kernel.org
Fixes: 3899152ccb ("KVM: nVMX: fix checks on CR{0,4} during virtual VMX operation")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220607213604.3346000-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Osipenko