Pull 'struct fd' class updates from Al Viro:
"The bulk of struct fd memory safety stuff
Making sure that struct fd instances are destroyed in the same scope
where they'd been created, getting rid of reassignments and passing
them by reference, converting to CLASS(fd{,_pos,_raw}).
We are getting very close to having the memory safety of that stuff
trivial to verify"
* tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits)
deal with the last remaing boolean uses of fd_file()
css_set_fork(): switch to CLASS(fd_raw, ...)
memcg_write_event_control(): switch to CLASS(fd)
assorted variants of irqfd setup: convert to CLASS(fd)
do_pollfd(): convert to CLASS(fd)
convert do_select()
convert vfs_dedupe_file_range().
convert cifs_ioctl_copychunk()
convert media_request_get_by_fd()
convert spu_run(2)
switch spufs_calls_{get,put}() to CLASS() use
convert cachestat(2)
convert do_preadv()/do_pwritev()
fdget(), more trivial conversions
fdget(), trivial conversions
privcmd_ioeventfd_assign(): don't open-code eventfd_ctx_fdget()
o2hb_region_dev_store(): avoid goto around fdget()/fdput()
introduce "fd_pos" class, convert fdget_pos() users to it.
fdget_raw() users: switch to CLASS(fd_raw)
convert vmsplice() to CLASS(fd)
...
Pull ecryptfs updates from Christian Brauner:
"The folio project is about to remove page->index. This contains the
work required for ecryptfs"
* tag 'vfs-6.13.ecryptfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
ecryptfs: Pass the folio index to crypt_extent()
ecryptfs: Convert lower_offset_for_page() to take a folio
ecryptfs: Convert ecryptfs_decrypt_page() to take a folio
ecryptfs: Convert ecryptfs_encrypt_page() to take a folio
ecryptfs: Convert ecryptfs_write_lower_page_segment() to take a folio
ecryptfs: Convert ecryptfs_write() to use a folio
ecryptfs: Convert ecryptfs_read_lower_page_segment() to take a folio
ecryptfs: Convert ecryptfs_copy_up_encrypted_with_header() to take a folio
ecryptfs: Use a folio throughout ecryptfs_read_folio()
ecryptfs: Convert ecryptfs_writepage() to ecryptfs_writepages()
Pull vfs untorn write support from Christian Brauner:
"An atomic write is a write issed with torn-write protection. This
means for a power failure or any hardware failure all or none of the
data from the write will be stored, never a mix of old and new data.
This work is already supported for block devices. If a block device is
opened with O_DIRECT and the block device supports atomic write, then
FMODE_CAN_ATOMIC_WRITE is added to the file of the opened block
device.
This contains the work to expand atomic write support to filesystems,
specifically ext4 and XFS. Currently, only support for writing exactly
one filesystem block atomically is added.
Since it's now possible to have filesystem block size > page size for
XFS, it's possible to write 4K+ blocks atomically on x86"
* tag 'vfs-6.13.untorn.writes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: drop an obsolete comment in iomap_dio_bio_iter
ext4: Do not fallback to buffered-io for DIO atomic write
ext4: Support setting FMODE_CAN_ATOMIC_WRITE
ext4: Check for atomic writes support in write iter
ext4: Add statx support for atomic writes
xfs: Support setting FMODE_CAN_ATOMIC_WRITE
xfs: Validate atomic writes
xfs: Support atomic write for statx
fs: iomap: Atomic write support
fs: Export generic_atomic_write_valid()
block: Add bdev atomic write limits helpers
fs/block: Check for IOCB_DIRECT in generic_atomic_write_valid()
block/fs: Pass an iocb to generic_atomic_write_valid()
Pull tmpfs case folding updates from Christian Brauner:
"This adds case-insensitive support for tmpfs.
The work contained in here adds support for case-insensitive file
names lookups in tmpfs. The main difference from other casefold
filesystems is that tmpfs has no information on disk, just on RAM, so
we can't use mkfs to create a case-insensitive tmpfs. For this
implementation, there's a mount option for casefolding. The rest of
the patchset follows a similar approach as ext4 and f2fs.
The use case for this feature is similar to the use case for ext4, to
better support compatibility layers (like Wine), particularly in
combination with sandboxing/container tools (like Flatpak).
Those containerization tools can share a subset of the host filesystem
with an application. In the container, the root directory and any
parent directories required for a shared directory are on tmpfs, with
the shared directories bind-mounted into the container's view of the
filesystem.
If the host filesystem is using case-insensitive directories, then the
application can do lookups inside those directories in a
case-insensitive way, without this needing to be implemented in
user-space. However, if the host is only sharing a subset of a
case-insensitive directory with the application, then the parent
directories of the mount point will be part of the container's root
tmpfs. When the application tries to do case-insensitive lookups of
those parent directories on a case-sensitive tmpfs, the lookup will
fail"
* tag 'vfs-6.13.tmpfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
tmpfs: Initialize sysfs during tmpfs init
tmpfs: Fix type for sysfs' casefold attribute
libfs: Fix kernel-doc warning in generic_ci_validate_strict_name
docs: tmpfs: Add casefold options
tmpfs: Expose filesystem features via sysfs
tmpfs: Add flag FS_CASEFOLD_FL support for tmpfs dirs
tmpfs: Add casefold lookup support
libfs: Export generic_ci_ dentry functions
unicode: Recreate utf8_parse_version()
unicode: Export latest available UTF-8 version number
ext4: Use generic_ci_validate_strict_name helper
libfs: Create the helper function generic_ci_validate_strict_name()
Pull copy_struct_to_user helper from Christian Brauner:
"This adds a copy_struct_to_user() helper which is a companion helper
to the already widely used copy_struct_from_user().
It copies a struct from kernel space to userspace, in a way that
guarantees backwards-compatibility for struct syscall arguments as
long as future struct extensions are made such that all new fields are
appended to the old struct, and zeroed-out new fields have the same
meaning as the old struct.
The first user is sched_getattr() system call but the new extensible
pidfs ioctl will be ported to it as well"
* tag 'vfs-6.13.usercopy' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
sched_getattr: port to copy_struct_to_user
uaccess: add copy_struct_to_user helper
Pull pidfs update from Christian Brauner:
"This adds a new ioctl to retrieve information about a pidfd.
A common pattern when using pidfds is having to get information about
the process, which currently requires /proc being mounted, resolving
the fd to a pid, and then do manual string parsing of /proc/N/status
and friends. This needs to be reimplemented over and over in all
userspace projects (e.g.: it has been reimplemented in systemd, dbus,
dbus-daemon, polkit so far), and requires additional care in checking
that the fd is still valid after having parsed the data, to avoid
races.
Having a programmatic API that can be used directly removes all these
requirements, including having /proc mounted.
As discussed at LPC24, add an ioctl with an extensible struct so that
more parameters can be added later if needed. Start with returning
pid/tgid/ppid and some creds unconditionally, and cgroupid optionally"
* tag 'vfs-6.13.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
pidfd: add ioctl to retrieve pid info
Pull overlayfs updates from Christian Brauner:
"Make overlayfs support specifying layers through file descriptors.
Currently overlayfs only allows specifying layers through path names.
This is inconvenient for users that want to assemble an overlayfs
mount purely based on file descriptors:
This enables user to specify both:
fsconfig(fd_overlay, FSCONFIG_SET_FD, "upperdir+", NULL, fd_upper);
fsconfig(fd_overlay, FSCONFIG_SET_FD, "workdir+", NULL, fd_work);
fsconfig(fd_overlay, FSCONFIG_SET_FD, "lowerdir+", NULL, fd_lower1);
fsconfig(fd_overlay, FSCONFIG_SET_FD, "lowerdir+", NULL, fd_lower2);
in addition to:
fsconfig(fd_overlay, FSCONFIG_SET_STRING, "upperdir+", "/upper", 0);
fsconfig(fd_overlay, FSCONFIG_SET_STRING, "workdir+", "/work", 0);
fsconfig(fd_overlay, FSCONFIG_SET_STRING, "lowerdir+", "/lower1", 0);
fsconfig(fd_overlay, FSCONFIG_SET_STRING, "lowerdir+", "/lower2", 0);
There's also a large set of new overlayfs selftests to test new
features and some older properties"
* tag 'vfs-6.13.ovl' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests: add test for specifying 500 lower layers
selftests: add overlayfs fd mounting selftests
selftests: use shared header
Documentation,ovl: document new file descriptor based layers
ovl: specify layers via file descriptors
fs: add helper to use mount option as path or fd
Pull vfs file updates from Christian Brauner:
"This contains changes the changes for files for this cycle:
- Introduce a new reference counting mechanism for files.
As atomic_inc_not_zero() is implemented with a try_cmpxchg() loop
it has O(N^2) behaviour under contention with N concurrent
operations and it is in a hot path in __fget_files_rcu().
The rcuref infrastructures remedies this problem by using an
unconditional increment relying on safe- and dead zones to make
this work and requiring rcu protection for the data structure in
question. This not just scales better it also introduces overflow
protection.
However, in contrast to generic rcuref, files require a memory
barrier and thus cannot rely on *_relaxed() atomic operations and
also require to be built on atomic_long_t as having massive amounts
of reference isn't unheard of even if it is just an attack.
This adds a file specific variant instead of making this a generic
library.
This has been tested by various people and it gives consistent
improvement up to 3-5% on workloads with loads of threads.
- Add a fastpath for find_next_zero_bit(). Skip 2-levels searching
via find_next_zero_bit() when there is a free slot in the word that
contains the next fd. This improves pts/blogbench-1.1.0 read by 8%
and write by 4% on Intel ICX 160.
- Conditionally clear full_fds_bits since it's very likely that a bit
in full_fds_bits has been cleared during __clear_open_fds(). This
improves pts/blogbench-1.1.0 read up to 13%, and write up to 5% on
Intel ICX 160.
- Get rid of all lookup_*_fdget_rcu() variants. They were used to
lookup files without taking a reference count. That became invalid
once files were switched to SLAB_TYPESAFE_BY_RCU and now we're
always taking a reference count. Switch to an already existing
helper and remove the legacy variants.
- Remove pointless includes of <linux/fdtable.h>.
- Avoid cmpxchg() in close_files() as nobody else has a reference to
the files_struct at that point.
- Move close_range() into fs/file.c and fold __close_range() into it.
- Cleanup calling conventions of alloc_fdtable() and expand_files().
- Merge __{set,clear}_close_on_exec() into one.
- Make __set_open_fd() set cloexec as well instead of doing it in two
separate steps"
* tag 'vfs-6.13.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests: add file SLAB_TYPESAFE_BY_RCU recycling stressor
fs: port files to file_ref
fs: add file_ref
expand_files(): simplify calling conventions
make __set_open_fd() set cloexec state as well
fs: protect backing files with rcu
file.c: merge __{set,clear}_close_on_exec()
alloc_fdtable(): change calling conventions.
fs/file.c: add fast path in find_next_fd()
fs/file.c: conditionally clear full_fds
fs/file.c: remove sanity_check and add likely/unlikely in alloc_fd()
move close_range(2) into fs/file.c, fold __close_range() into it
close_files(): don't bother with xchg()
remove pointless includes of <linux/fdtable.h>
get rid of ...lookup...fdget_rcu() family
Pull netfs updates from Christian Brauner:
"Various fixes for the netfs library and related infrastructure:
cachefiles:
- Fix a dentry leak in cachefiles_open_file()
- Fix incorrect length return value in
cachefiles_ondemand_fd_write_iter()
- Fix missing pos updates in cachefiles_ondemand_fd_write_iter()
- Clean up in cachefiles_commit_tmpfile()
- Fix NULL pointer dereference in object->file
- Add a memory barrier for FSCACHE_VOLUME_CREATING
netfs:
- Remove call to folio_index()
- Fix a few minor bugs in netfs_page_mkwrite()
- Remove unnecessary references to pages"
* tag 'vfs-6.13.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
netfs/fscache: Add a memory barrier for FSCACHE_VOLUME_CREATING
cachefiles: Fix NULL pointer dereference in object->file
cachefiles: Clean up in cachefiles_commit_tmpfile()
cachefiles: Fix missing pos updates in cachefiles_ondemand_fd_write_iter()
cachefiles: Fix incorrect length return value in cachefiles_ondemand_fd_write_iter()
netfs: Remove unnecessary references to pages
netfs: Fix a few minor bugs in netfs_page_mkwrite()
netfs: Remove call to folio_index()
Pull vfs pagecache updates from Christian Brauner:
"Cleanup filesystem page flag usage: This continues the work to make
the mappedtodisk/owner_2 flag available to filesystems which don't use
buffer heads. Further patches remove uses of Private2. This brings us
very close to being rid of it entirely"
* tag 'vfs-6.13.pagecache' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
migrate: Remove references to Private2
ceph: Remove call to PagePrivate2()
btrfs: Switch from using the private_2 flag to owner_2
mm: Remove PageMappedToDisk
nilfs2: Convert nilfs_copy_buffer() to use folios
fs: Move clearing of mappedtodisk to buffer.c
Pull vfs rust file abstractions from Christian Brauner:
"This contains the file abstractions needed by the Rust implementation
of the Binder driver and other parts of the kernel.
Let's treat this as a first attempt at getting something working but I
do expect the actual interfaces to change significantly over time.
Simply because we are still figuring out what actually works. But
there's no point in further theorizing. Let's see how it holds up with
actual users"
* tag 'vfs-6.13.rust.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
rust: task: adjust safety comments in Task methods
rust: add seqfile abstraction
rust: file: add abstraction for `poll_table`
rust: file: add `Kuid` wrapper
rust: file: add `FileDescriptorReservation`
rust: security: add abstraction for secctx
rust: cred: add Rust abstraction for `struct cred`
rust: file: add Rust abstraction for `struct file`
rust: task: add `Task::current_raw`
rust: types: add `NotThreadSafe`
Pull misc vfs updates from Christian Brauner:
"Features:
- Fixup and improve NLM and kNFSD file lock callbacks
Last year both GFS2 and OCFS2 had some work done to make their
locking more robust when exported over NFS. Unfortunately, part of
that work caused both NLM (for NFS v3 exports) and kNFSD (for
NFSv4.1+ exports) to no longer send lock notifications to clients
This in itself is not a huge problem because most NFS clients will
still poll the server in order to acquire a conflicted lock
It's important for NLM and kNFSD that they do not block their
kernel threads inside filesystem's file_lock implementations
because that can produce deadlocks. We used to make sure of this by
only trusting that posix_lock_file() can correctly handle blocking
lock calls asynchronously, so the lock managers would only setup
their file_lock requests for async callbacks if the filesystem did
not define its own lock() file operation
However, when GFS2 and OCFS2 grew the capability to correctly
handle blocking lock requests asynchronously, they started
signalling this behavior with EXPORT_OP_ASYNC_LOCK, and the check
for also trusting posix_lock_file() was inadvertently dropped, so
now most filesystems no longer produce lock notifications when
exported over NFS
Fix this by using an fop_flag which greatly simplifies the problem
and grooms the way for future uses by both filesystems and lock
managers alike
- Add a sysctl to delete the dentry when a file is removed instead of
making it a negative dentry
Commit 681ce86235 ("vfs: Delete the associated dentry when
deleting a file") introduced an unconditional deletion of the
associated dentry when a file is removed. However, this led to
performance regressions in specific benchmarks, such as
ilebench.sum_operations/s, prompting a revert in commit
4a4be1ad3a ("Revert "vfs: Delete the associated dentry when
deleting a file""). This reintroduces the concept conditionally
through a sysctl
- Expand the statmount() system call:
* Report the filesystem subtype in a new fs_subtype field to
e.g., report fuse filesystem subtypes
* Report the superblock source in a new sb_source field
* Add a new way to return filesystem specific mount options in an
option array that returns filesystem specific mount options
separated by zero bytes and unescaped. This allows caller's to
retrieve filesystem specific mount options and immediately pass
them to e.g., fsconfig() without having to unescape or split
them
* Report security (LSM) specific mount options in a separate
security option array. We don't lump them together with
filesystem specific mount options as security mount options are
generic and most users aren't interested in them
The format is the same as for the filesystem specific mount
option array
- Support relative paths in fsconfig()'s FSCONFIG_SET_STRING command
- Optimize acl_permission_check() to avoid costly {g,u}id ownership
checks if possible
- Use smp_mb__after_spinlock() to avoid full smp_mb() in evict()
- Add synchronous wakeup support for ep_poll_callback.
Currently, epoll only uses wake_up() to wake up task. But sometimes
there are epoll users which want to use the synchronous wakeup flag
to give a hint to the scheduler, e.g., the Android binder driver.
So add a wake_up_sync() define, and use wake_up_sync() when sync is
true in ep_poll_callback()
Fixes:
- Fix kernel documentation for inode_insert5() and iget5_locked()
- Annotate racy epoll check on file->f_ep
- Make F_DUPFD_QUERY associative
- Avoid filename buffer overrun in initramfs
- Don't let statmount() return empty strings
- Add a cond_resched() to dump_user_range() to avoid hogging the CPU
- Don't query the device logical blocksize multiple times for hfsplus
- Make filemap_read() check that the offset is positive or zero
Cleanups:
- Various typo fixes
- Cleanup wbc_attach_fdatawrite_inode()
- Add __releases annotation to wbc_attach_and_unlock_inode()
- Add hugetlbfs tracepoints
- Fix various vfs kernel doc parameters
- Remove obsolete TODO comment from io_cancel()
- Convert wbc_account_cgroup_owner() to take a folio
- Fix comments for BANDWITH_INTERVAL and wb_domain_writeout_add()
- Reorder struct posix_acl to save 8 bytes
- Annotate struct posix_acl with __counted_by()
- Replace one-element array with flexible array member in freevxfs
- Use idiomatic atomic64_inc_return() in alloc_mnt_ns()"
* tag 'vfs-6.13.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (35 commits)
statmount: retrieve security mount options
vfs: make evict() use smp_mb__after_spinlock instead of smp_mb
statmount: add flag to retrieve unescaped options
fs: add the ability for statmount() to report the sb_source
writeback: wbc_attach_fdatawrite_inode out of line
writeback: add a __releases annoation to wbc_attach_and_unlock_inode
fs: add the ability for statmount() to report the fs_subtype
fs: don't let statmount return empty strings
fs:aio: Remove TODO comment suggesting hash or array usage in io_cancel()
hfsplus: don't query the device logical block size multiple times
freevxfs: Replace one-element array with flexible array member
fs: optimize acl_permission_check()
initramfs: avoid filename buffer overrun
fs/writeback: convert wbc_account_cgroup_owner to take a folio
acl: Annotate struct posix_acl with __counted_by()
acl: Realign struct posix_acl to save 8 bytes
epoll: Add synchronous wakeup support for ep_poll_callback
coredump: add cond_resched() to dump_user_range
mm/page-writeback.c: Fix comment of wb_domain_writeout_add()
mm/page-writeback.c: Update comment for BANDWIDTH_INTERVAL
...
Pull vfs mount api conversions from Christian Brauner:
"Convert adfs, affs, befs, hfs, hfsplus, jfs, and hpfs to the new mount
api"
* tag 'vfs-6.13.mount.api' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
efs: fix the efs new mount api implementation
ubifs: Convert ubifs to use the new mount API
hpfs: convert hpfs to use the new mount api
jfs: convert jfs to use the new mount api
hfsplus: convert hfsplus to use the new mount api
hfs: convert hfs to use the new mount api
befs: convert befs to use the new mount api
affs: convert affs to use the new mount api
adfs: convert adfs to use the new mount api
Pull vfs multigrain timestamps from Christian Brauner:
"This is another try at implementing multigrain timestamps. This time
with significant help from the timekeeping maintainers to reduce the
performance impact.
Thomas provided a base branch that contains the required timekeeping
interfaces for the VFS. It serves as the base for the multi-grain
timestamp work:
- Multigrain timestamps allow the kernel to use fine-grained
timestamps when an inode's attributes is being actively observed
via ->getattr(). With this support, it's possible for a file to get
a fine-grained timestamp, and another modified after it to get a
coarse-grained stamp that is earlier than the fine-grained time. If
this happens then the files can appear to have been modified in
reverse order, which breaks VFS ordering guarantees.
To prevent this, a floor value is maintained for multigrain
timestamps. Whenever a fine-grained timestamp is handed out, record
it, and when later coarse-grained stamps are handed out, ensure
they are not earlier than that value. If the coarse-grained
timestamp is earlier than the fine-grained floor, return the floor
value instead.
The timekeeper changes add a static singleton atomic64_t into
timekeeper.c that is used to keep track of the latest fine-grained
time ever handed out. This is tracked as a monotonic ktime_t value
to ensure that it isn't affected by clock jumps. Because it is
updated at different times than the rest of the timekeeper object,
the floor value is managed independently of the timekeeper via a
cmpxchg() operation, and sits on its own cacheline.
Two new public timekeeper interfaces are added:
(1) ktime_get_coarse_real_ts64_mg() fills a timespec64 with the
later of the coarse-grained clock and the floor time
(2) ktime_get_real_ts64_mg() gets the fine-grained clock value,
and tries to swap it into the floor. A timespec64 is filled
with the result.
- The VFS has always used coarse-grained timestamps when updating the
ctime and mtime after a change. This has the benefit of allowing
filesystems to optimize away a lot metadata updates, down to around
1 per jiffy, even when a file is under heavy writes.
Unfortunately, this has always been an issue when we're exporting
via NFSv3, which relies on timestamps to validate caches. A lot of
changes can happen in a jiffy, so timestamps aren't sufficient to
help the client decide when to invalidate the cache. Even with
NFSv4, a lot of exported filesystems don't properly support a
change attribute and are subject to the same problems with
timestamp granularity. Other applications have similar issues with
timestamps (e.g backup applications).
If we were to always use fine-grained timestamps, that would
improve the situation, but that becomes rather expensive, as the
underlying filesystem would have to log a lot more metadata
updates.
This adds a way to only use fine-grained timestamps when they are
being actively queried. Use the (unused) top bit in
inode->i_ctime_nsec as a flag that indicates whether the current
timestamps have been queried via stat() or the like. When it's set,
we allow the kernel to use a fine-grained timestamp iff it's
necessary to make the ctime show a different value.
This solves the problem of being able to distinguish the timestamp
between updates, but introduces a new problem: it's now possible
for a file being changed to get a fine-grained timestamp. A file
that is altered just a bit later can then get a coarse-grained one
that appears older than the earlier fine-grained time. This
violates timestamp ordering guarantees.
This is where the earlier mentioned timkeeping interfaces help. A
global monotonic atomic64_t value is kept that acts as a timestamp
floor. When we go to stamp a file, we first get the latter of the
current floor value and the current coarse-grained time. If the
inode ctime hasn't been queried then we just attempt to stamp it
with that value.
If it has been queried, then first see whether the current coarse
time is later than the existing ctime. If it is, then we accept
that value. If it isn't, then we get a fine-grained time and try to
swap that into the global floor. Whether that succeeds or fails, we
take the resulting floor time, convert it to realtime and try to
swap that into the ctime.
We take the result of the ctime swap whether it succeeds or fails,
since either is just as valid.
Filesystems can opt into this by setting the FS_MGTIME fstype flag.
Others should be unaffected (other than being subject to the same
floor value as multigrain filesystems)"
* tag 'vfs-6.13.mgtime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: reduce pointer chasing in is_mgtime() test
tmpfs: add support for multigrain timestamps
btrfs: convert to multigrain timestamps
ext4: switch to multigrain timestamps
xfs: switch to multigrain timestamps
Documentation: add a new file documenting multigrain timestamps
fs: add percpu counters for significant multigrain timestamp events
fs: tracepoints around multigrain timestamp events
fs: handle delegated timestamps in setattr_copy_mgtime
timekeeping: Add percpu counter for tracking floor swap events
timekeeping: Add interfaces for handling timestamps with a floor value
fs: have setattr_copy handle multigrain timestamps appropriately
fs: add infrastructure for multigrain timestamps
Pull x86 fixes from Borislav Petkov:
- Make sure a kdump kernel with CONFIG_IMA_KEXEC enabled and booted on
an AMD SME enabled hardware properly decrypts the ima_kexec buffer
information passed to it from the previous kernel
- Fix building the kernel with Clang where a non-TLS definition of the
stack protector guard cookie leads to bogus code generation
- Clear a wrongly advertised virtualized VMLOAD/VMSAVE feature flag on
some Zen4 client systems as those insns are not supported on client
* tag 'x86_urgent_for_v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Fix a kdump kernel failure on SME system when CONFIG_IMA_KEXEC=y
x86/stackprotector: Work around strict Clang TLS symbol requirements
x86/CPU/AMD: Clear virtualized VMLOAD/VMSAVE on Zen4 client
Pull hotfixes from Andrew Morton:
"10 hotfixes, 7 of which are cc:stable. All singletons, please see the
changelogs for details"
* tag 'mm-hotfixes-stable-2024-11-16-15-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: revert "mm: shmem: fix data-race in shmem_getattr()"
ocfs2: uncache inode which has failed entering the group
mm: fix NULL pointer dereference in alloc_pages_bulk_noprof
mm, doc: update read_ahead_kb for MADV_HUGEPAGE
fs/proc/task_mmu: prevent integer overflow in pagemap_scan_get_args()
sched/task_stack: fix object_is_on_stack() for KASAN tagged pointers
crash, powerpc: default to CRASH_DUMP=n on PPC_BOOK3S_32
mm/mremap: fix address wraparound in move_page_tables()
tools/mm: fix compile error
mm, swap: fix allocation and scanning race with swapoff
Pull ARM fixes from Russell King:
- Fix kernel mapping for XIP kernels
- Fix SMP support for XIP kernels
- Fix complication corner case with CFI
- Fix a typo in nommu code
- Fix cacheflush syscall when PAN is enabled on LPAE platforms
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: fix cacheflush with PAN
ARM: 9435/1: ARM/nommu: Fix typo "absence"
ARM: 9434/1: cfi: Fix compilation corner case
ARM: 9420/1: smp: Fix SMP for xip kernels
ARM: 9419/1: mm: Fix kernel memory mapping for xip kernels
Pull drm fix from Dave Airlie:
"Alex sent on a last minute revert for a amdgpu/swsmu regression:
- revert patch to fix swsmu regression"
* tag 'drm-fixes-2024-11-17' of https://gitlab.freedesktop.org/drm/kernel:
Revert "drm/amd/pm: correct the workload setting"
Pull ring buffer fixes from Steven Rostedt:
- Revert: "ring-buffer: Do not have boot mapped buffers hook to CPU
hotplug"
A crash that happened on cpu hotplug was actually caused by the
incorrect ref counting that was fixed by commit 2cf9733891
("ring-buffer: Fix refcount setting of boot mapped buffers"). The
removal of calling cpu hotplug callbacks on memory mapped buffers was
not an issue even though the tests at the time pointed toward it. But
in fact, there's a check in that code that tests to see if the
buffers are already allocated or not, and will not allocate them
again if they are. Not calling the cpu hotplug callbacks ended up not
initializing the non boot CPU buffers.
Simply remove that change.
- Clear all CPU buffers when starting tracing in a boot mapped buffer
To properly process events from a previous boot, the address space
needs to be accounted for due to KASLR and the events in the buffer
are updated accordingly when read. This also requires that when the
buffer has tracing enabled again in the current boot that the buffers
are reset so that events from the previous boot do not interact with
the events of the current boot and cause confusing due to not having
the proper meta data.
It was found that if a CPU is taken offline, that its per CPU buffer
is not reset when tracing starts. This allows for events to be from
both the previous boot and the current boot to be in the buffer at
the same time. Clear all CPU buffers when tracing is started in a
boot mapped buffer.
* tag 'trace-ringbuffer-v6.12-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/ring-buffer: Clear all memory mapped CPU ring buffers on first recording
Revert: "ring-buffer: Do not have boot mapped buffers hook to CPU hotplug"
Pull RISC-V fix from Palmer Dabbelt:
- A fix for the CPU perf driver that avoids leaking CPU ID references
on systems without snapshot support.
* tag 'riscv-for-linus-6.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
drivers: perf: Fix wrong put_cpu() placement
Pull drm fixes from Dave Airlie:
"Final week of fixes, lots of small amdgpu fixes, some i915 and xe
fixes, the nouveau changes fix a recent regression and some laptop
panel black screens, then a couple of other misc ones.
It's probably a little busier than I'd like, but each fix seems fine.
amdgpu:
- PSR fix
- Panel replay fixes
- DML fix
- vblank power fix
- Fix video caps
- SMU 14.0 fix
- GPUVM fix
- MES 12 fix
- APU carve out fix
- DC vbios fix
- NBIO fix
i915:
- Don't load GSC on ARL-H and ARL-U if too old FW
- Avoid potential OOPS in enabling/disabling TV output
xe:
- Fix unlock on exec ioctl error path
- Fix hibernation on LNL due to ggtt getting lost
- Fix missing runtime PM in OA release
bridge:
- tc358768: Fix DSI command tx
nouveau:
- Fix GSP AUX error handling
- dp: Handle retires for AUX CH transfers with GSP
- fw: Sync DMA after setup
panthor:
- Fix partial BO mappings to GPU
rockchip:
- vop: Avoid null-ptr deref in plane-state check
vmwgfx:
- Avoid null-ptr deref in surface creation"
* tag 'drm-fixes-2024-11-16' of https://gitlab.freedesktop.org/drm/kernel: (27 commits)
drm/bridge: tc358768: Fix DSI command tx
drm/vmwgfx: avoid null_ptr_deref in vmw_framebuffer_surface_create_handle
nouveau/dp: handle retries for AUX CH transfers with GSP.
nouveau: handle EBUSY and EAGAIN for GSP aux errors.
nouveau: fw: sync dma after setup is called.
drm/xe/oa: Fix "Missing outer runtime PM protection" warning
drm/xe: handle flat ccs during hibernation on igpu
drm/xe: improve hibernation on igpu
drm/xe: Restore system memory GGTT mappings
drm/xe: Ensure all locks released in exec IOCTL
drm/panthor: Fix handling of partial GPU mapping of BOs
drm/amd: Fix initialization mistake for NBIO 7.7.0
Revert "drm/amd/display: parse umc_info or vram_info based on ASIC"
drm/amd/display: Fix failure to read vram info due to static BP_RESULT
drm/amdgpu: enable GTT fallback handling for dGPUs only
drm/i915: Grab intel_display from the encoder to avoid potential oopsies
drm/i915/gsc: ARL-H and ARL-U need a newer GSC FW.
drm/amdgpu/mes12: correct kiq unmap latency
drm/amdgpu: fix check in gmc_v9_0_get_vm_pte()
drm/amd/pm: print pp_dpm_mclk in ascending order on SMU v14.0.0
...
Pull rdma fixes from Jason Gunthorpe:
- Revert a change to the VLAN logic, this broke previously working ROCE
configurations
- Fix a memory leak on error unwinding in bnxt_re
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
Revert "RDMA/core: Fix ENODEV error for iWARP test over vlan"
RDMA/bnxt_re: Remove some dead code
RDMA/bnxt_re: Fix some error handling paths in bnxt_re_probe()
Pull pmdomain fixes from Ulf Hansson:
"pmdomain core:
- Add GENPD_FLAG_DEV_NAME_FW flag to generate unique names
pmdomain providers:
- arm: Use FLAG_DEV_NAME_FW to ensure unique names
- imx93-blk-ctrl: Fix the remove path
arm_scmi/qcom-cpucp:
- Report duplicate OPPs as firmware bugs for arm_scmi
- Skip OPP duplicates for arm_scmi
- Mark the qcom-cpucp mailbox irq with IRQF_NO_SUSPEND flag"
* tag 'pmdomain-v6.12-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
mailbox: qcom-cpucp: Mark the irq with IRQF_NO_SUSPEND flag
firmware: arm_scmi: Report duplicate opps as firmware bugs
firmware: arm_scmi: Skip opp duplicates
pmdomain: imx93-blk-ctrl: correct remove path
pmdomain: arm: Use FLAG_DEV_NAME_FW to ensure unique names
pmdomain: core: Add GENPD_FLAG_DEV_NAME_FW flag
Pull sound fixes from Takashi Iwai:
"A few last-minute fixes. All changes are device-specific small fixes
that should be pretty safe to apply"
* tag 'sound-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - update set GPIO3 to default for Thinkpad with ALC1318
ALSA: hda/realtek: fix mute/micmute LEDs for a HP EliteBook 645 G10
ALSA: hda/realtek - Fixed Clevo platform headset Mic issue
ALSA: usb-audio: Fix Yamaha P-125 Quirk Entry
ASoC: max9768: Fix event generation for playback mute
ASoC: intel: sof_sdw: add quirk for Dell SKU
ASoC: audio-graph-card2: Purge absent supplies for device tree nodes
Pull crypto fix from Herbert Xu:
"Fix a regression in the MIPS CRC32C code"
* tag 'v6.12-p5' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: mips/crc32 - fix the CRC32C implementation
Pull sched_ext fix from Tejun Heo:
"One more fix for v6.12-rc7
ops.cpu_acquire() was being invoked with the wrong kfunc mask allowing
the operation to call kfuncs which shouldn't be allowed. Fix it by
using SCX_KF_REST instead, which is trivial and low risk"
* tag 'sched_ext-for-6.12-rc7-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: ops.cpu_acquire() should be called with SCX_KF_REST
Pull btrfs fix from David Sterba:
"One more fix that seems urgent and good to have in 6.12 final.
It could potentially lead to unexpected transaction aborts, due to
wrong comparison and order of processing of delayed refs"
* tag 'for-6.12-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix incorrect comparison for delayed refs
Syzbot has reported the following BUG:
kernel BUG at fs/ocfs2/uptodate.c:509!
...
Call Trace:
<TASK>
? __die_body+0x5f/0xb0
? die+0x9e/0xc0
? do_trap+0x15a/0x3a0
? ocfs2_set_new_buffer_uptodate+0x145/0x160
? do_error_trap+0x1dc/0x2c0
? ocfs2_set_new_buffer_uptodate+0x145/0x160
? __pfx_do_error_trap+0x10/0x10
? handle_invalid_op+0x34/0x40
? ocfs2_set_new_buffer_uptodate+0x145/0x160
? exc_invalid_op+0x38/0x50
? asm_exc_invalid_op+0x1a/0x20
? ocfs2_set_new_buffer_uptodate+0x2e/0x160
? ocfs2_set_new_buffer_uptodate+0x144/0x160
? ocfs2_set_new_buffer_uptodate+0x145/0x160
ocfs2_group_add+0x39f/0x15a0
? __pfx_ocfs2_group_add+0x10/0x10
? __pfx_lock_acquire+0x10/0x10
? mnt_get_write_access+0x68/0x2b0
? __pfx_lock_release+0x10/0x10
? rcu_read_lock_any_held+0xb7/0x160
? __pfx_rcu_read_lock_any_held+0x10/0x10
? smack_log+0x123/0x540
? mnt_get_write_access+0x68/0x2b0
? mnt_get_write_access+0x68/0x2b0
? mnt_get_write_access+0x226/0x2b0
ocfs2_ioctl+0x65e/0x7d0
? __pfx_ocfs2_ioctl+0x10/0x10
? smack_file_ioctl+0x29e/0x3a0
? __pfx_smack_file_ioctl+0x10/0x10
? lockdep_hardirqs_on_prepare+0x43d/0x780
? __pfx_lockdep_hardirqs_on_prepare+0x10/0x10
? __pfx_ocfs2_ioctl+0x10/0x10
__se_sys_ioctl+0xfb/0x170
do_syscall_64+0xf3/0x230
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
</TASK>
When 'ioctl(OCFS2_IOC_GROUP_ADD, ...)' has failed for the particular
inode in 'ocfs2_verify_group_and_input()', corresponding buffer head
remains cached and subsequent call to the same 'ioctl()' for the same
inode issues the BUG() in 'ocfs2_set_new_buffer_uptodate()' (trying
to cache the same buffer head of that inode). Fix this by uncaching
the buffer head with 'ocfs2_remove_from_cache()' on error path in
'ocfs2_group_add()'.
Link: https://lkml.kernel.org/r/20241114043844.111847-1-dmantipov@yandex.ru
Fixes: 7909f2bf83 ("[PATCH 2/2] ocfs2: Implement group add for online resize")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reported-by: syzbot+453873f1588c2d75b447@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=453873f1588c2d75b447
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Dmitry Antipov <dmantipov@yandex.ru>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We triggered a NULL pointer dereference for ac.preferred_zoneref->zone in
alloc_pages_bulk_noprof() when the task is migrated between cpusets.
When cpuset is enabled, in prepare_alloc_pages(), ac->nodemask may be
¤t->mems_allowed. when first_zones_zonelist() is called to find
preferred_zoneref, the ac->nodemask may be modified concurrently if the
task is migrated between different cpusets. Assuming we have 2 NUMA Node,
when traversing Node1 in ac->zonelist, the nodemask is 2, and when
traversing Node2 in ac->zonelist, the nodemask is 1. As a result, the
ac->preferred_zoneref points to NULL zone.
In alloc_pages_bulk_noprof(), for_each_zone_zonelist_nodemask() finds a
allowable zone and calls zonelist_node_idx(ac.preferred_zoneref), leading
to NULL pointer dereference.
__alloc_pages_noprof() fixes this issue by checking NULL pointer in commit
ea57485af8 ("mm, page_alloc: fix check for NULL preferred_zone") and
commit df76cee6bb ("mm, page_alloc: remove redundant checks from alloc
fastpath").
To fix it, check NULL pointer for preferred_zoneref->zone.
Link: https://lkml.kernel.org/r/20241113083235.166798-1-tujinjiang@huawei.com
Fixes: 387ba26fb1 ("mm/page_alloc: add a bulk page allocator")
Signed-off-by: Jinjiang Tu <tujinjiang@huawei.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Lobakin <alobakin@pm.me>
Cc: David Hildenbrand <david@redhat.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
On 32-bit platforms, it is possible for the expression `len + old_addr <
old_end` to be false-positive if `len + old_addr` wraps around.
`old_addr` is the cursor in the old range up to which page table entries
have been moved; so if the operation succeeded, `old_addr` is the *end* of
the old region, and adding `len` to it can wrap.
The overflow causes mremap() to mistakenly believe that PTEs have been
copied; the consequence is that mremap() bails out, but doesn't move the
PTEs back before the new VMA is unmapped, causing anonymous pages in the
region to be lost. So basically if userspace tries to mremap() a
private-anon region and hits this bug, mremap() will return an error and
the private-anon region's contents appear to have been zeroed.
The idea of this check is that `old_end - len` is the original start
address, and writing the check that way also makes it easier to read; so
fix the check by rearranging the comparison accordingly.
(An alternate fix would be to refactor this function by introducing an
"orig_old_start" variable or such.)
Tested in a VM with a 32-bit X86 kernel; without the patch:
```
user@horn:~/big_mremap$ cat test.c
#define _GNU_SOURCE
#include <stdlib.h>
#include <stdio.h>
#include <err.h>
#include <sys/mman.h>
#define ADDR1 ((void*)0x60000000)
#define ADDR2 ((void*)0x10000000)
#define SIZE 0x50000000uL
int main(void) {
unsigned char *p1 = mmap(ADDR1, SIZE, PROT_READ|PROT_WRITE,
MAP_ANONYMOUS|MAP_PRIVATE|MAP_FIXED_NOREPLACE, -1, 0);
if (p1 == MAP_FAILED)
err(1, "mmap 1");
unsigned char *p2 = mmap(ADDR2, SIZE, PROT_NONE,
MAP_ANONYMOUS|MAP_PRIVATE|MAP_FIXED_NOREPLACE, -1, 0);
if (p2 == MAP_FAILED)
err(1, "mmap 2");
*p1 = 0x41;
printf("first char is 0x%02hhx\n", *p1);
unsigned char *p3 = mremap(p1, SIZE, SIZE,
MREMAP_MAYMOVE|MREMAP_FIXED, p2);
if (p3 == MAP_FAILED) {
printf("mremap() failed; first char is 0x%02hhx\n", *p1);
} else {
printf("mremap() succeeded; first char is 0x%02hhx\n", *p3);
}
}
user@horn:~/big_mremap$ gcc -static -o test test.c
user@horn:~/big_mremap$ setarch -R ./test
first char is 0x41
mremap() failed; first char is 0x00
```
With the patch:
```
user@horn:~/big_mremap$ setarch -R ./test
first char is 0x41
mremap() succeeded; first char is 0x41
```
Link: https://lkml.kernel.org/r/20241111-fix-mremap-32bit-wrap-v1-1-61d6be73b722@google.com
Fixes: af8ca1c149 ("mm/mremap: optimize the start addresses in move_page_tables()")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are two flags used to synchronize allocation and scanning with
swapoff: SWP_WRITEOK and SWP_SCANNING.
SWP_WRITEOK: Swapoff will first unset this flag, at this point any further
swap allocation or scanning on this device should just abort so no more
new entries will be referencing this device. Swapoff will then unuse all
existing swap entries.
SWP_SCANNING: This flag is set when device is being scanned. Swapoff will
wait for all scanner to stop before the final release of the swap device
structures to avoid UAF. Note this flag is the highest used bit of
si->flags so it could be added up arithmetically, if there are multiple
scanner.
commit 5f843a9a3a ("mm: swap: separate SSD allocation from
scan_swap_map_slots()") ignored SWP_SCANNING and SWP_WRITEOK flags while
separating cluster allocation path from the old allocation path. Add the
flags back to fix swapoff race. The race is hard to trigger as si->lock
prevents most parallel operations, but si->lock could be dropped for
reclaim or discard. This issue is found during code review.
This commit fixes this problem. For SWP_SCANNING, Just like before, set
the flag before scan and remove it afterwards.
For SWP_WRITEOK, there are several places where si->lock could be dropped,
it will be error-prone and make the code hard to follow if we try to cover
these places one by one. So just do one check before the real allocation,
which is also very similar like before. With new cluster allocator it may
waste a bit of time iterating the clusters but won't take long, and
swapoff is not performance sensitive.
Link: https://lkml.kernel.org/r/20241112083414.78174-1-ryncsn@gmail.com
Fixes: 5f843a9a3a ("mm: swap: separate SSD allocation from scan_swap_map_slots()")
Reported-by: "Huang, Ying" <ying.huang@intel.com>
Closes: https://lore.kernel.org/linux-mm/87a5es3f1f.fsf@yhuang6-desk2.ccr.corp.intel.com/
Signed-off-by: Kairui Song <kasong@tencent.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ops.cpu_acquire() is currently called with 0 kf_maks which is interpreted as
SCX_KF_UNLOCKED which allows all unlocked kfuncs, but ops.cpu_acquire() is
called from balance_one() under the rq lock and should only be allowed call
kfuncs that are safe under the rq lock. Update it to use SCX_KF_REST.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: David Vernet <void@manifault.com>
Cc: Zhao Mengmeng <zhaomzhao@126.com>
Link: http://lkml.kernel.org/r/ZzYvf2L3rlmjuKzh@slm.duckdns.org
Fixes: 245254f708 ("sched_ext: Implement sched_ext_ops.cpu_acquire/release()")
Pull bcachefs fixes from Kent Overstreet:
"This fixes one minor regression from the btree cache fixes (in the
scan_for_btree_nodes repair path) - and the shutdown path fix is the
big one here, in terms of bugs closed:
- Assorted tiny syzbot fixes
- Shutdown path fix: "bch2_btree_write_buffer_flush_going_ro()"
The shutdown path wasn't flushing the btree write buffer, leading
to shutting down while we still had operations in flight. This
fixes a whole slew of syzbot bugs, and undoubtedly other strange
heisenbugs.
* tag 'bcachefs-2024-11-13' of git://evilpiepirate.org/bcachefs:
bcachefs: Fix assertion pop in bch2_ptr_swab()
bcachefs: Fix journal_entry_dev_usage_to_text() overrun
bcachefs: Allow for unknown key types in backpointers fsck
bcachefs: Fix assertion pop in topology repair
bcachefs: Fix hidden btree errors when reading roots
bcachefs: Fix validate_bset() repair path
bcachefs: Fix missing validation for bch_backpointer.level
bcachefs: Fix bch_member.btree_bitmap_shift validation
bcachefs: bch2_btree_write_buffer_flush_going_ro()
The events of a memory mapped ring buffer from the previous boot should
not be mixed in with events from the current boot. There's meta data that
is used to handle KASLR so that function names can be shown properly.
Also, since the timestamps of the previous boot have no meaning to the
timestamps of the current boot, having them intermingled in a buffer can
also cause confusion because there could possibly be events in the future.
When a trace is activated the meta data is reset so that the pointers of
are now processed for the new address space. The trace buffers are reset
when tracing starts for the first time. The problem here is that the reset
only happens on online CPUs. If a CPU is offline, it does not get reset.
To demonstrate the issue, a previous boot had tracing enabled in the boot
mapped ring buffer on reboot. On the following boot, tracing has not been
started yet so the function trace from the previous boot is still visible.
# trace-cmd show -B boot_mapped -c 3 | tail
<idle>-0 [003] d.h2. 156.462395: __rcu_read_lock <-cpu_emergency_disable_virtualization
<idle>-0 [003] d.h2. 156.462396: vmx_emergency_disable_virtualization_cpu <-cpu_emergency_disable_virtualization
<idle>-0 [003] d.h2. 156.462396: __rcu_read_unlock <-__sysvec_reboot
<idle>-0 [003] d.h2. 156.462397: stop_this_cpu <-__sysvec_reboot
<idle>-0 [003] d.h2. 156.462397: set_cpu_online <-stop_this_cpu
<idle>-0 [003] d.h2. 156.462397: disable_local_APIC <-stop_this_cpu
<idle>-0 [003] d.h2. 156.462398: clear_local_APIC <-disable_local_APIC
<idle>-0 [003] d.h2. 156.462574: mcheck_cpu_clear <-stop_this_cpu
<idle>-0 [003] d.h2. 156.462575: mce_intel_feature_clear <-stop_this_cpu
<idle>-0 [003] d.h2. 156.462575: lmce_supported <-mce_intel_feature_clear
Now, if CPU 3 is taken offline, and tracing is started on the memory
mapped ring buffer, the events from the previous boot in the CPU 3 ring
buffer is not reset. Now those events are using the meta data from the
current boot and produces just hex values.
# echo 0 > /sys/devices/system/cpu/cpu3/online
# trace-cmd start -B boot_mapped -p function
# trace-cmd show -B boot_mapped -c 3 | tail
<idle>-0 [003] d.h2. 156.462395: 0xffffffff9a1e3194 <-0xffffffff9a0f655e
<idle>-0 [003] d.h2. 156.462396: 0xffffffff9a0a1d24 <-0xffffffff9a0f656f
<idle>-0 [003] d.h2. 156.462396: 0xffffffff9a1e6bc4 <-0xffffffff9a0f7323
<idle>-0 [003] d.h2. 156.462397: 0xffffffff9a0d12b4 <-0xffffffff9a0f732a
<idle>-0 [003] d.h2. 156.462397: 0xffffffff9a1458d4 <-0xffffffff9a0d12e2
<idle>-0 [003] d.h2. 156.462397: 0xffffffff9a0faed4 <-0xffffffff9a0d12e7
<idle>-0 [003] d.h2. 156.462398: 0xffffffff9a0faaf4 <-0xffffffff9a0faef2
<idle>-0 [003] d.h2. 156.462574: 0xffffffff9a0e3444 <-0xffffffff9a0d12ef
<idle>-0 [003] d.h2. 156.462575: 0xffffffff9a0e4964 <-0xffffffff9a0d12ef
<idle>-0 [003] d.h2. 156.462575: 0xffffffff9a0e3fb0 <-0xffffffff9a0e496f
Reset all CPUs when starting a boot mapped ring buffer for the first time,
and not just the online CPUs.
Fixes: 7a1d1e4b96 ("tracing/ring-buffer: Add last_boot_info file to boot instance")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add the ability to retrieve security mount options. Keep them separate
from filesystem specific mount options so it's easy to tell them apart.
Also allow to retrieve them separate from other mount options as most of
the time users won't be interested in security specific mount options.
Link: https://lore.kernel.org/r/20241114-radtour-ofenrohr-ff34b567b40a@brauner
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Linus Torvalds