Merge tag 'mtd/fixes-for-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull MTD fixes from Miquel Raynal:
 "Raw NAND controller driver fixes:

   - meson:
      - Invalidate cache on polling ECC bit
      - Initialize struct with zeroes

   - nandsim: Artificially prevent sequential page reads

  ECC engine driver fixes:

   - mxic-ecc: Fix mxic_ecc_data_xfer_wait_for_completion() when irq is
     used

  Binging fixes:

   - jedec,spi-nor: Document CPOL/CPHA support"

* tag 'mtd/fixes-for-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: rawnand: meson: invalidate cache on polling ECC bit
  mtd: rawnand: nandsim: Artificially prevent sequential page reads
  dt-bindings: mtd: jedec,spi-nor: Document CPOL/CPHA support
  mtd: nand: mxic-ecc: Fix mxic_ecc_data_xfer_wait_for_completion() when irq is used
  mtd: rawnand: meson: initialize struct with zeroes

Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml

@@ -76,6 +76,13 @@ properties:
       If "broken-flash-reset" is present then having this property does not
       make any difference.
 
+  spi-cpol: true
+  spi-cpha: true
+
+dependencies:
+  spi-cpol: [ spi-cpha ]
+  spi-cpha: [ spi-cpol ]
+
 unevaluatedProperties: false
 
 examples:

drivers/mtd/nand/ecc-mxic.c

@@ -429,6 +429,7 @@ static int mxic_ecc_data_xfer_wait_for_completion(struct mxic_ecc_engine *mxic)
 		mxic_ecc_enable_int(mxic);
 		ret = wait_for_completion_timeout(&mxic->complete,
 						  msecs_to_jiffies(1000));
+		ret = ret ? 0 : -ETIMEDOUT;
 		mxic_ecc_disable_int(mxic);
 	} else {
 		ret = readl_poll_timeout(mxic->regs + INTRPT_STS, val,

drivers/mtd/nand/raw/meson_nand.c

@@ -176,6 +176,7 @@ struct meson_nfc {
 
 	dma_addr_t daddr;
 	dma_addr_t iaddr;
+	u32 info_bytes;
 
 	unsigned long assigned_cs;
 };
@@ -503,6 +504,7 @@ static int meson_nfc_dma_buffer_setup(struct nand_chip *nand, void *databuf,
 					 nfc->daddr, datalen, dir);
 			return ret;
 		}
+		nfc->info_bytes = infolen;
 		cmd = GENCMDIADDRL(NFC_CMD_AIL, nfc->iaddr);
 		writel(cmd, nfc->reg_base + NFC_REG_CMD);
 
@@ -520,8 +522,10 @@ static void meson_nfc_dma_buffer_release(struct nand_chip *nand,
 	struct meson_nfc *nfc = nand_get_controller_data(nand);
 
 	dma_unmap_single(nfc->dev, nfc->daddr, datalen, dir);
-	if (infolen)
+	if (infolen) {
 		dma_unmap_single(nfc->dev, nfc->iaddr, infolen, dir);
+		nfc->info_bytes = 0;
+	}
 }
 
 static int meson_nfc_read_buf(struct nand_chip *nand, u8 *buf, int len)
@@ -710,6 +714,8 @@ static void meson_nfc_check_ecc_pages_valid(struct meson_nfc *nfc,
 		usleep_range(10, 15);
 		/* info is updated by nfc dma engine*/
 		smp_rmb();
+		dma_sync_single_for_cpu(nfc->dev, nfc->iaddr, nfc->info_bytes,
+					DMA_FROM_DEVICE);
 		ret = *info & ECC_COMPLETE;
 	} while (!ret);
 }
@@ -991,7 +997,7 @@ static const struct mtd_ooblayout_ops meson_ooblayout_ops = {
 
 static int meson_nfc_clk_init(struct meson_nfc *nfc)
 {
-	struct clk_parent_data nfc_divider_parent_data[1];
+	struct clk_parent_data nfc_divider_parent_data[1] = {0};
 	struct clk_init_data init = {0};
 	int ret;
 

drivers/mtd/nand/raw/nandsim.c

@@ -2160,8 +2160,23 @@ static int ns_exec_op(struct nand_chip *chip, const struct nand_operation *op,
 	const struct nand_op_instr *instr = NULL;
 	struct nandsim *ns = nand_get_controller_data(chip);
 
-	if (check_only)
+	if (check_only) {
+		/* The current implementation of nandsim needs to know the
+		 * ongoing operation when performing the address cycles. This
+		 * means it cannot make the difference between a regular read
+		 * and a continuous read. Hence, this hack to manually refuse
+		 * supporting sequential cached operations.
+		 */
+		for (op_id = 0; op_id < op->ninstrs; op_id++) {
+			instr = &op->instrs[op_id];
+			if (instr->type == NAND_OP_CMD_INSTR &&
+			    (instr->ctx.cmd.opcode == NAND_CMD_READCACHEEND ||
+			     instr->ctx.cmd.opcode == NAND_CMD_READCACHESEQ))
+				return -EOPNOTSUPP;
+		}
+
 		return 0;
+	}
 
 	ns->lines.ce = 1;