Merge tag 'imx-fixes-6.10' into imx/dt64

i.MX fixes for 6.10:

- Fix GPIO number for reg_usdhc2_vmmc on imx8qm-mek board.
- Enable hysteresis for SODIMM_17 pin on imx8mm-verdin board to increase
  immunity against noise.
- Remove 'no-sdio' property for uSDHC2 on imx93-11x11-evk board, so that
  SDIO cards could also work.
- Fix BT shutdown GPIO for imx8mp-venice-gw73xx-2x board.
- Fix panel node deleting on imx53-qsb-hdmi, as /delete-node/ directive
  doesn't really delete a node in a DT overlay.
- Fix TC9595 input clock on DH i.MX8M Plus DHCOM SoM.
- Fix GPU speed for imx8mm-verdin board by enabling overdrive mode in
  the SOM dtsi.
This commit is contained in:
Shawn Guo
2024-07-01 22:21:22 +08:00
7 changed files with 10 additions and 8 deletions
@@ -85,7 +85,7 @@
};
};
panel {
panel_dpi: panel {
compatible = "sii,43wvf1g";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_display_power>;
@@ -10,8 +10,6 @@
/plugin/;
&{/} {
/delete-node/ panel;
hdmi: connector-hdmi {
compatible = "hdmi-connector";
label = "hdmi";
@@ -82,6 +80,10 @@
};
};
&panel_dpi {
status = "disabled";
};
&tve {
status = "disabled";
};
@@ -6,6 +6,7 @@
#include <dt-bindings/phy/phy-imx8-pcie.h>
#include <dt-bindings/pwm/pwm.h>
#include "imx8mm.dtsi"
#include "imx8mm-overdrive.dtsi"
/ {
chosen {
@@ -935,7 +936,7 @@
/* Verdin GPIO_9_DSI (pulled-up as active-low) */
pinctrl_gpio_9_dsi: gpio9dsigrp {
fsl,pins =
<MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15 0x146>; /* SODIMM 17 */
<MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15 0x1c6>; /* SODIMM 17 */
};
/* Verdin GPIO_10_DSI (pulled-up as active-low) */
@@ -254,7 +254,7 @@
<&clk IMX8MP_CLK_CLKOUT2>,
<&clk IMX8MP_AUDIO_PLL2_OUT>;
assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>;
assigned-clock-rates = <13000000>, <13000000>, <156000000>;
assigned-clock-rates = <13000000>, <13000000>, <208000000>;
reset-gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
status = "disabled";
@@ -219,7 +219,7 @@
bluetooth {
compatible = "brcm,bcm4330-bt";
shutdown-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
shutdown-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
};
};
+1 -1
View File
@@ -36,7 +36,7 @@
regulator-name = "SD1_SPWR";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
gpio = <&lsio_gpio4 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -296,7 +296,6 @@
vmmc-supply = <&reg_usdhc2_vmmc>;
bus-width = <4>;
status = "okay";
no-sdio;
no-mmc;
};