arm64: dts: qcom: msm8916-wingtech-wt865x8: Add Lenovo A6000/A6010
Add initial device-tree for Lenovo A6000 (wt86518) and Lenovo A6010 (wt86528), which are MSM8916-based devices. These devices are quite similar, so some configuration is shared in msm8916-wingtech-wt865x8.dtsi. Lenovo A6000 (wt86518): - storage (eMMC and uSD card); - usb in peripheral mode; - touchscreen; - sensors; - WiFi/BT; - keys; - battery and charger. Lenovo A6010 (wt86528): - storage (eMMC and uSD card); - usb with extcon; - touchscreen; - sensors; - WiFi/BT; - keys; - leds; - battery; Signed-off-by: Anton Bambura <jenneron@postmarketos.org> Co-developed-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> [Nikita: minor cleanup] Signed-off-by: Nikita Travkin <nikita@trvn.ru> Link: https://lore.kernel.org/r/20240729-msm89xx-wingtech-init-v3-2-32c35476f098@trvn.ru Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This commit is contained in:
Anton Bambura
committed by
Bjorn Andersson
Bjorn Andersson
parent
e3eaace51c
commit
bc5bf7b1ec
@@ -54,6 +54,8 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-rossa.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-uf896.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-ufi001c.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt86518.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt86528.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-yiming-uz801v3.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8939-huawei-kiwi.dtb
|
||||
|
||||
@@ -0,0 +1,87 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "msm8916-wingtech-wt865x8.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Lenovo A6000 (Wingtech WT86518)";
|
||||
compatible = "wingtech,wt86518", "qcom,msm8916";
|
||||
chassis-type = "handset";
|
||||
|
||||
speaker_amp: audio-amplifier {
|
||||
compatible = "awinic,aw8738";
|
||||
|
||||
pinctrl-0 = <&spk_ext_pa_default>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
mode-gpios = <&tlmm 119 GPIO_ACTIVE_HIGH>;
|
||||
sound-name-prefix = "Speaker Amp";
|
||||
awinic,mode = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&blsp_i2c2 {
|
||||
accelerometer@e {
|
||||
compatible = "kionix,kxcj91008";
|
||||
reg = <0xe>;
|
||||
|
||||
vdd-supply = <&pm8916_l6>;
|
||||
vddio-supply = <&pm8916_l6>;
|
||||
|
||||
mount-matrix = "0", "-1", "0",
|
||||
"-1", "0", "0",
|
||||
"0", "0", "1";
|
||||
};
|
||||
};
|
||||
|
||||
&headphones_switch {
|
||||
VCC-supply = <&pm8916_l17>;
|
||||
};
|
||||
|
||||
&pm8916_bms {
|
||||
power-supplies = <&pm8916_charger>;
|
||||
};
|
||||
|
||||
&pm8916_charger {
|
||||
qcom,fast-charge-safe-current = <900000>;
|
||||
qcom,fast-charge-safe-voltage = <4300000>;
|
||||
|
||||
monitored-battery = <&battery>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sound {
|
||||
model = "wt88047";
|
||||
widgets = "Speaker", "Speaker",
|
||||
"Headphone", "Headphones";
|
||||
pin-switches = "Speaker", "Headphones";
|
||||
audio-routing = "Speaker", "Speaker Amp OUT",
|
||||
"Speaker Amp IN", "HPH_R",
|
||||
"Headphones", "Headphones Switch OUTL",
|
||||
"Headphones", "Headphones Switch OUTR",
|
||||
"Headphones Switch INL", "HPH_L",
|
||||
"Headphones Switch INR", "HPH_R",
|
||||
"AMIC1", "MIC BIAS Internal1",
|
||||
"AMIC2", "MIC BIAS Internal2";
|
||||
aux-devs = <&speaker_amp>, <&headphones_switch>;
|
||||
};
|
||||
|
||||
&usb {
|
||||
dr_mode = "peripheral";
|
||||
extcon = <&pm8916_charger>;
|
||||
};
|
||||
|
||||
&usb_hs_phy {
|
||||
extcon = <&pm8916_charger>;
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
spk_ext_pa_default: spk-ext-pa-default-state {
|
||||
pins = "gpio119";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
@@ -0,0 +1,158 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "msm8916-wingtech-wt865x8.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Lenovo A6010 (Wingtech WT86528)";
|
||||
compatible = "wingtech,wt86528", "qcom,msm8916";
|
||||
chassis-type = "handset";
|
||||
|
||||
/* left AW8736 */
|
||||
speaker_amp_left: audio-amplifier-left {
|
||||
compatible = "awinic,aw8738";
|
||||
|
||||
pinctrl-0 = <&spk_ext_pa_left_default>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
mode-gpios = <&tlmm 119 GPIO_ACTIVE_HIGH>;
|
||||
sound-name-prefix = "Speaker Amp L";
|
||||
awinic,mode = <3>;
|
||||
};
|
||||
|
||||
/* right AW8736 */
|
||||
speaker_amp_right: audio-amplifier-right {
|
||||
compatible = "awinic,aw8738";
|
||||
|
||||
pinctrl-0 = <&spk_ext_pa_right_default>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
mode-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>;
|
||||
sound-name-prefix = "Speaker Amp R";
|
||||
awinic,mode = <3>;
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
pinctrl-0 = <&gpio_leds_default>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
led-0 {
|
||||
gpios = <&tlmm 16 GPIO_ACTIVE_LOW>;
|
||||
label = "red";
|
||||
default-state = "off";
|
||||
retain-state-suspended;
|
||||
};
|
||||
|
||||
led-1 {
|
||||
gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
|
||||
label = "green";
|
||||
default-state = "off";
|
||||
retain-state-suspended;
|
||||
};
|
||||
};
|
||||
|
||||
usb_id: usb-id {
|
||||
compatible = "linux,extcon-usb-gpio";
|
||||
id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&usb_id_default>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
|
||||
&blsp_i2c2 {
|
||||
magnetometer@c {
|
||||
compatible = "asahi-kasei,ak09911";
|
||||
reg = <0x0c>;
|
||||
|
||||
vdd-supply = <&pm8916_l17>;
|
||||
vid-supply = <&pm8916_l6>;
|
||||
};
|
||||
|
||||
imu@68 {
|
||||
compatible = "invensense,mpu6880";
|
||||
reg = <0x68>;
|
||||
|
||||
interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_RISING>;
|
||||
|
||||
vdd-supply = <&pm8916_l17>;
|
||||
vddio-supply = <&pm8916_l6>;
|
||||
|
||||
pinctrl-0 = <&imu_default>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
mount-matrix = "1", "0", "0",
|
||||
"0", "-1", "0",
|
||||
"0", "0", "1";
|
||||
};
|
||||
};
|
||||
|
||||
&pm8916_codec {
|
||||
qcom,micbias1-ext-cap;
|
||||
};
|
||||
|
||||
&sound {
|
||||
model = "wt86528";
|
||||
widgets = "Speaker", "Speaker",
|
||||
"Headphone", "Headphones";
|
||||
pin-switches = "Speaker", "Headphones";
|
||||
audio-routing = "Speaker", "Speaker Amp L OUT",
|
||||
"Speaker", "Speaker Amp R OUT",
|
||||
"Speaker Amp L IN", "HPH_L",
|
||||
"Speaker Amp R IN", "HPH_R",
|
||||
"Headphones", "Headphones Switch OUTL",
|
||||
"Headphones", "Headphones Switch OUTR",
|
||||
"Headphones Switch INL", "HPH_L",
|
||||
"Headphones Switch INR", "HPH_R",
|
||||
"AMIC1", "MIC BIAS External1",
|
||||
"AMIC2", "MIC BIAS Internal2",
|
||||
"AMIC3", "MIC BIAS External1";
|
||||
aux-devs = <&speaker_amp_left>, <&speaker_amp_right>, <&headphones_switch>;
|
||||
};
|
||||
|
||||
&usb {
|
||||
extcon = <&usb_id>, <&usb_id>;
|
||||
};
|
||||
|
||||
&usb_hs_phy {
|
||||
extcon = <&usb_id>;
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
gpio_leds_default: gpio-leds-default-state {
|
||||
pins = "gpio16", "gpio17";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
imu_default: imu-default-state {
|
||||
pins = "gpio115";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
spk_ext_pa_left_default: spk-ext-pa-left-default-state {
|
||||
pins = "gpio119";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
spk_ext_pa_right_default: spk-ext-pa-right-default-state {
|
||||
pins = "gpio121";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
usb_id_default: usb-id-default-state {
|
||||
pins = "gpio110";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
@@ -0,0 +1,215 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
|
||||
#include "msm8916-pm8916.dtsi"
|
||||
#include "msm8916-modem-qdsp6.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
mmc0 = &sdhc_1; /* eMMC */
|
||||
mmc1 = &sdhc_2; /* SD card */
|
||||
serial0 = &blsp_uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0";
|
||||
};
|
||||
|
||||
headphones_switch: audio-switch {
|
||||
compatible = "simple-audio-amplifier";
|
||||
|
||||
pinctrl-0 = <&headphones_switch_default>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
enable-gpios = <&tlmm 120 GPIO_ACTIVE_HIGH>;
|
||||
sound-name-prefix = "Headphones Switch";
|
||||
};
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pm8916_pwm 0 100000>;
|
||||
|
||||
brightness-levels = <0 255>;
|
||||
num-interpolated-steps = <255>;
|
||||
default-brightness-level = <255>;
|
||||
};
|
||||
|
||||
battery: battery {
|
||||
compatible = "simple-battery";
|
||||
voltage-min-design-microvolt = <3400000>;
|
||||
voltage-max-design-microvolt = <4350000>;
|
||||
energy-full-design-microwatt-hours = <8740000>;
|
||||
charge-full-design-microamp-hours = <2300000>;
|
||||
|
||||
ocv-capacity-celsius = <25>;
|
||||
ocv-capacity-table-0 = <4328000 100>, <4266000 95>, <4208000 90>,
|
||||
<4154000 85>, <4102000 80>, <4062000 75>, <3992000 70>,
|
||||
<3960000 65>, <3914000 60>, <3870000 55>, <3840000 50>,
|
||||
<3818000 45>, <3800000 40>, <3784000 35>, <3770000 30>,
|
||||
<3756000 25>, <3736000 20>, <3714000 16>, <3696000 13>,
|
||||
<3690000 11>, <3689000 10>, <3688000 9>, <3686000 8>,
|
||||
<3682000 7>, <3670000 6>, <3639000 5>, <3592000 4>,
|
||||
<3530000 3>, <3448000 2>, <3320000 1>, <3000000 0>;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-0 = <&gpio_keys_default>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
label = "GPIO Buttons";
|
||||
|
||||
volume-up-button {
|
||||
label = "Volume Up";
|
||||
gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&blsp_i2c5 {
|
||||
status = "okay";
|
||||
|
||||
touchscreen@38 {
|
||||
compatible = "edt,edt-ft5306";
|
||||
reg = <0x38>;
|
||||
|
||||
interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
vcc-supply = <&pm8916_l17>;
|
||||
iovcc-supply = <&pm8916_l6>;
|
||||
|
||||
reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
|
||||
|
||||
touchscreen-size-x = <720>;
|
||||
touchscreen-size-y = <1280>;
|
||||
|
||||
pinctrl-0 = <&touchscreen_default>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
|
||||
&blsp_uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mpss_mem {
|
||||
reg = <0x0 0x86800000 0x0 0x5500000>;
|
||||
};
|
||||
|
||||
&pm8916_bms {
|
||||
monitored-battery = <&battery>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pm8916_codec {
|
||||
qcom,micbias-lvl = <2800>;
|
||||
qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
|
||||
qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
|
||||
qcom,hphl-jack-type-normally-open;
|
||||
};
|
||||
|
||||
&pm8916_pwm {
|
||||
pinctrl-0 = <&pwm_out>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pm8916_resin {
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pm8916_rpm_regulators {
|
||||
pm8916_l17: l17 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pm8916_vib {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhc_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhc_2 {
|
||||
pinctrl-0 = <&sdc2_default>;
|
||||
pinctrl-1 = <&sdc2_sleep>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
|
||||
non-removable;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&venus {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&venus_mem {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wcnss {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wcnss_iris {
|
||||
compatible = "qcom,wcn3620";
|
||||
};
|
||||
|
||||
&wcnss_mem {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
gpio_keys_default: gpio-keys-default-state {
|
||||
pins = "gpio107";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
headphones_switch_default: headphones-switch-default-state {
|
||||
pins = "gpio120";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
touchscreen_default: touchscreen-default-state {
|
||||
touchscreen-pins {
|
||||
pins = "gpio13";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
reset-pins {
|
||||
pins = "gpio12";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pm8916_mpps {
|
||||
pwm_out: mpp4-state {
|
||||
pins = "mpp4";
|
||||
function = "digital";
|
||||
power-source = <PM8916_MPP_VPH>;
|
||||
output-low;
|
||||
qcom,dtest = <1>;
|
||||
};
|
||||
};
|
||||
Reference in New Issue
Block a user