Merge tag 'v6.16-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New SoC the RK3562 (4xA53, Mali-G52) with one evaluation board. New boards: - Cobra and PP1516 from Theobroma-Systems (build around the PX30) - Radxa Rock 5B+ (rk3588) - Rockchip RK3399 industrial eval board New peripherals: - GMAC + SDMMC/SDIO on rk3528 - SAI + HDMI-audio on rk3576 Interesting general updates: - move rk3528 i2c + uart aliases as requested - rk3568 PCIe3 MSI to use GIC ITS - update deprecated dwmac reset properties on some px30 boards - updates for cypress usb hubs on some Theobroma boards Binding taken with Greg's blessing https://lore.kernel.org/all/2025051550-polish-prude-ed56@gregkh/ * tag 'v6.16-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (35 commits) arm64: dts: rockchip: Improve LED config for NanoPi R5S arm64: dts: rockchip: add px30-pp1516 base dtsi and board variants dt-bindings: arm: rockchip: add PX30-PP1516 boards from Theobroma Systems arm64: dts: rockchip: add px30-cobra base dtsi and board variants dt-bindings: arm: rockchip: add PX30-Cobra boards from Theobroma Systems arm64: dts: rockchip: move reset to dedicated eth-phy node on ringneck arm64: dts: rockchip: add basic mdio node to px30 arm64: dts: rockchip: disable unrouted USB controllers and PHY on RK3399 Puma with Haikou arm64: dts: rockchip: disable unrouted USB controllers and PHY on RK3399 Puma arm64: dts: rockchip: fix internal USB hub instability on RK3399 Puma dt-bindings: usb: cypress,hx3: Add support for all variants arm64: dts: rockchip: move rk3528 i2c+uart aliases to board files arm64: dts: rockchip: drop wrong spdif clock from edp1 on rk3588 arm64: dts: rockchip: Add RK3562 evb2 devicetree arm64: dts: rockchip: add core dtsi for RK3562 SoC dt-bindings: arm: rockchip: Add rk3562 evb2 board dt-bindings: soc: rockchip: Add rk3562 syscon compatibles dt-bindings: rockchip: pmu: Add rk3562 compatible arm64: dts: rockchip: Enable Ethernet controller on Radxa E20C arm64: dts: rockchip: Add GMAC nodes for RK3528 ... Link: https://lore.kernel.org/r/3998939.iIbC2pHGDl@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann
@@ -946,6 +946,11 @@ properties:
|
||||
- const: radxa,rock-5b
|
||||
- const: rockchip,rk3588
|
||||
|
||||
- description: Radxa ROCK 5B+
|
||||
items:
|
||||
- const: radxa,rock-5b-plus
|
||||
- const: rockchip,rk3588
|
||||
|
||||
- description: Radxa ROCK 5C
|
||||
items:
|
||||
- const: radxa,rock-5c
|
||||
@@ -1047,6 +1052,11 @@ properties:
|
||||
- const: rockchip,rk3399-evb
|
||||
- const: rockchip,rk3399
|
||||
|
||||
- description: Rockchip RK3399 Industry Evaluation board
|
||||
items:
|
||||
- const: rockchip,rk3399-evb-ind
|
||||
- const: rockchip,rk3399
|
||||
|
||||
- description: Rockchip RK3399 Sapphire standalone
|
||||
items:
|
||||
- const: rockchip,rk3399-sapphire
|
||||
@@ -1057,6 +1067,11 @@ properties:
|
||||
- const: rockchip,rk3399-sapphire-excavator
|
||||
- const: rockchip,rk3399
|
||||
|
||||
- description: Rockchip RK3562 Evaluation board 2
|
||||
items:
|
||||
- const: rockchip,rk3562-evb2-v10
|
||||
- const: rockchip,rk3562
|
||||
|
||||
- description: Rockchip RK3566 BOX Evaluation Demo board
|
||||
items:
|
||||
- const: rockchip,rk3566-box-demo
|
||||
@@ -1111,6 +1126,24 @@ properties:
|
||||
- rockchip,rv1126
|
||||
- rockchip,rv1109
|
||||
|
||||
- description: Theobroma Systems PX30-Cobra
|
||||
items:
|
||||
- enum:
|
||||
- tsd,px30-cobra-ltk050h3146w
|
||||
- tsd,px30-cobra-ltk050h3146w-a2
|
||||
- tsd,px30-cobra-ltk050h3148w
|
||||
- tsd,px30-cobra-ltk500hd1829
|
||||
- const: tsd,px30-cobra
|
||||
- const: rockchip,px30
|
||||
|
||||
- description: Theobroma Systems PX30-PP1516
|
||||
items:
|
||||
- enum:
|
||||
- tsd,px30-pp1516-ltk050h3146w-a2
|
||||
- tsd,px30-pp1516-ltk050h3148w
|
||||
- const: tsd,px30-pp1516
|
||||
- const: rockchip,px30
|
||||
|
||||
- description: Theobroma Systems PX30-uQ7 with Haikou baseboard
|
||||
items:
|
||||
- const: tsd,px30-ringneck-haikou
|
||||
|
||||
@@ -25,6 +25,7 @@ select:
|
||||
- rockchip,rk3288-pmu
|
||||
- rockchip,rk3368-pmu
|
||||
- rockchip,rk3399-pmu
|
||||
- rockchip,rk3562-pmu
|
||||
- rockchip,rk3568-pmu
|
||||
- rockchip,rk3576-pmu
|
||||
- rockchip,rk3588-pmu
|
||||
@@ -43,6 +44,7 @@ properties:
|
||||
- rockchip,rk3288-pmu
|
||||
- rockchip,rk3368-pmu
|
||||
- rockchip,rk3399-pmu
|
||||
- rockchip,rk3562-pmu
|
||||
- rockchip,rk3568-pmu
|
||||
- rockchip,rk3576-pmu
|
||||
- rockchip,rk3588-pmu
|
||||
|
||||
@@ -18,6 +18,12 @@ properties:
|
||||
- rockchip,rk3528-ioc-grf
|
||||
- rockchip,rk3528-vo-grf
|
||||
- rockchip,rk3528-vpu-grf
|
||||
- rockchip,rk3562-ioc-grf
|
||||
- rockchip,rk3562-peri-grf
|
||||
- rockchip,rk3562-pipephy-grf
|
||||
- rockchip,rk3562-pmu-grf
|
||||
- rockchip,rk3562-sys-grf
|
||||
- rockchip,rk3562-usbphy-grf
|
||||
- rockchip,rk3566-pipe-grf
|
||||
- rockchip,rk3568-pcie3-phy-grf
|
||||
- rockchip,rk3568-pipe-grf
|
||||
@@ -82,6 +88,7 @@ properties:
|
||||
- rockchip,rk3368-pmugrf
|
||||
- rockchip,rk3399-grf
|
||||
- rockchip,rk3399-pmugrf
|
||||
- rockchip,rk3562-pmu-grf
|
||||
- rockchip,rk3568-grf
|
||||
- rockchip,rk3568-pmugrf
|
||||
- rockchip,rk3576-ioc-grf
|
||||
|
||||
@@ -14,9 +14,22 @@ allOf:
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- usb4b4,6504
|
||||
- usb4b4,6506
|
||||
oneOf:
|
||||
- enum:
|
||||
- usb4b4,6504
|
||||
- usb4b4,6506
|
||||
- items:
|
||||
- enum:
|
||||
- usb4b4,6500
|
||||
- usb4b4,6508
|
||||
- const: usb4b4,6504
|
||||
- items:
|
||||
- enum:
|
||||
- usb4b4,6502
|
||||
- usb4b4,6503
|
||||
- usb4b4,6507
|
||||
- usb4b4,650a
|
||||
- const: usb4b4,6506
|
||||
|
||||
reg: true
|
||||
|
||||
|
||||
@@ -1,9 +1,15 @@
|
||||
# SPDX-License-Identifier: GPL-2.0
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-cobra-ltk050h3146w-a2.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-cobra-ltk050h3146w.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-cobra-ltk050h3148w.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-cobra-ltk500hd1829.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2-of10.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-edimm2.2.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-firefly-jd4-core-mb.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-pp1516-ltk050h3146w-a2.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-pp1516-ltk050h3148w.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou-lvds-9904379.dtbo
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou-video-demo.dtbo
|
||||
@@ -40,6 +46,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-eaidk-610.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb-ind.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-ficus.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-bob.dtb
|
||||
@@ -81,6 +88,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-radxa-e20c.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3562-evb2-v10.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg-arc-d.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg-arc-s.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353p.dtb
|
||||
@@ -165,6 +173,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5-itx.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-ep.dtbo
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-srns.dtbo
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-plus.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou-video-demo.dtbo
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-toybrick-x0.dtb
|
||||
|
||||
@@ -0,0 +1,39 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2025 Cherry Embedded Solutions GmbH
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "px30-cobra.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Theobroma Systems Cobra with LTK050H3146W-A2 Display";
|
||||
compatible = "tsd,px30-cobra-ltk050h3146w-a2", "tsd,px30-cobra", "rockchip,px30";
|
||||
};
|
||||
|
||||
&dsi {
|
||||
status = "okay";
|
||||
|
||||
panel@0 {
|
||||
compatible = "leadtek,ltk050h3146w-a2";
|
||||
reg = <0>;
|
||||
backlight = <&backlight>;
|
||||
iovcc-supply = <&vcc_1v8>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&dsp_rst>;
|
||||
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
|
||||
vci-supply = <&vcc_2v8>;
|
||||
|
||||
port {
|
||||
mipi_in_panel: endpoint {
|
||||
remote-endpoint = <&mipi_out_panel>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&dsi_out {
|
||||
mipi_out_panel: endpoint {
|
||||
remote-endpoint = <&mipi_in_panel>;
|
||||
};
|
||||
};
|
||||
@@ -0,0 +1,39 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2025 Cherry Embedded Solutions GmbH
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "px30-cobra.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Theobroma Systems Cobra with LTK050H3146W Display";
|
||||
compatible = "tsd,px30-cobra-ltk050h3146w", "tsd,px30-cobra", "rockchip,px30";
|
||||
};
|
||||
|
||||
&dsi {
|
||||
status = "okay";
|
||||
|
||||
panel@0 {
|
||||
compatible = "leadtek,ltk050h3146w";
|
||||
reg = <0>;
|
||||
backlight = <&backlight>;
|
||||
iovcc-supply = <&vcc_1v8>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&dsp_rst>;
|
||||
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
|
||||
vci-supply = <&vcc_2v8>;
|
||||
|
||||
port {
|
||||
mipi_in_panel: endpoint {
|
||||
remote-endpoint = <&mipi_out_panel>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&dsi_out {
|
||||
mipi_out_panel: endpoint {
|
||||
remote-endpoint = <&mipi_in_panel>;
|
||||
};
|
||||
};
|
||||
@@ -0,0 +1,39 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2025 Cherry Embedded Solutions GmbH
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "px30-cobra.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Theobroma Systems Cobra with ltk050h3148w Display";
|
||||
compatible = "tsd,px30-cobra-ltk050h3148w", "tsd,px30-cobra", "rockchip,px30";
|
||||
};
|
||||
|
||||
&dsi {
|
||||
status = "okay";
|
||||
|
||||
panel@0 {
|
||||
compatible = "leadtek,ltk050h3148w";
|
||||
reg = <0>;
|
||||
backlight = <&backlight>;
|
||||
iovcc-supply = <&vcc_1v8>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&dsp_rst>;
|
||||
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
|
||||
vci-supply = <&vcc_2v8>;
|
||||
|
||||
port {
|
||||
mipi_in_panel: endpoint {
|
||||
remote-endpoint = <&mipi_out_panel>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&dsi_out {
|
||||
mipi_out_panel: endpoint {
|
||||
remote-endpoint = <&mipi_in_panel>;
|
||||
};
|
||||
};
|
||||
@@ -0,0 +1,73 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2025 Cherry Embedded Solutions GmbH
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "px30-cobra.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Theobroma Systems Cobra prototype with LTK500HD1829 Display";
|
||||
compatible = "tsd,px30-cobra-ltk500hd1829", "tsd,px30-cobra", "rockchip,px30";
|
||||
|
||||
aliases {
|
||||
mmc1 = &sdmmc;
|
||||
};
|
||||
};
|
||||
|
||||
&dsi {
|
||||
status = "okay";
|
||||
|
||||
panel@0 {
|
||||
compatible = "leadtek,ltk500hd1829";
|
||||
reg = <0>;
|
||||
backlight = <&backlight>;
|
||||
iovcc-supply = <&vcc_1v8>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&dsp_rst>;
|
||||
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
|
||||
vcc-supply = <&vcc_2v8>;
|
||||
|
||||
port {
|
||||
mipi_in_panel: endpoint {
|
||||
remote-endpoint = <&mipi_out_panel>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&dsi_out {
|
||||
mipi_out_panel: endpoint {
|
||||
remote-endpoint = <&mipi_in_panel>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cobra_pin_hog>, <&cobra_proto_hog>;
|
||||
|
||||
hog {
|
||||
cobra_proto_hog: cobra-proto-hog {
|
||||
rockchip,pins =
|
||||
/* STUSB4500 open drain outout POWER_OK2, needs pull-up */
|
||||
<3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
|
||||
/* STUSB4500 open drain outout POWER_OK3, needs pull-up */
|
||||
<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
broken-cd;
|
||||
cap-sd-highspeed;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
|
||||
sd-uhs-sdr12;
|
||||
sd-uhs-sdr25;
|
||||
sd-uhs-sdr50;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vccio_sd>;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
@@ -0,0 +1,566 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2025 Cherry Embedded Solutions GmbH
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include "px30.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
ethernet0 = &gmac;
|
||||
mmc0 = &emmc;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial5:115200n8";
|
||||
};
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
power-supply = <&vcc5v0_sys>;
|
||||
pwms = <&pwm0 0 25000 0>;
|
||||
};
|
||||
|
||||
beeper {
|
||||
compatible = "pwm-beeper";
|
||||
pwms = <&pwm1 0 1000 0>;
|
||||
};
|
||||
|
||||
emmc_pwrseq: emmc-pwrseq {
|
||||
compatible = "mmc-pwrseq-emmc";
|
||||
pinctrl-0 = <&emmc_reset>;
|
||||
pinctrl-names = "default";
|
||||
reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&heartbeat_led_pin>;
|
||||
|
||||
/*
|
||||
* LED14 on the PCB. Typically NOT populated.
|
||||
*/
|
||||
led-0 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
||||
label = "heartbeat";
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
|
||||
pwm-leds {
|
||||
compatible = "pwm-leds";
|
||||
|
||||
ring_red: led-0 {
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
default-state = "off";
|
||||
label = "ring_red";
|
||||
pwms = <&pwm5 0 1000000 0>;
|
||||
max-brightness = <255>;
|
||||
};
|
||||
|
||||
ring_green: led-1 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
default-state = "off";
|
||||
label = "ring_green";
|
||||
pwms = <&pwm6 0 1000000 0>;
|
||||
max-brightness = <255>;
|
||||
};
|
||||
|
||||
ring_blue: led-2 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
default-state = "off";
|
||||
label = "ring_blue";
|
||||
pwms = <&pwm7 0 1000000 0>;
|
||||
max-brightness = <255>;
|
||||
};
|
||||
};
|
||||
|
||||
/* also named 5V_Q7 in schematics */
|
||||
vcc5v0_sys: regulator-vccsys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&display_subsystem {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dsi_dphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&emmc {
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
/*
|
||||
* For hs200 support, U-Boot would have to set the RK809 DCDC4
|
||||
* rail to 1.8V from the default of 3.0V. It doesn't do that on
|
||||
* devices out in the field, so disable hs200.
|
||||
* mmc-hs200-1_8v;
|
||||
*/
|
||||
mmc-pwrseq = <&emmc_pwrseq>;
|
||||
non-removable;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&vcc_emmc>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac {
|
||||
clock_in_out = "output";
|
||||
phy-handle = <&dp83825>;
|
||||
phy-supply = <&vcc_3v3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_log>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* I2C0 = PMIC, STUSB4500, RTC */
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
rk809: pmic@20 {
|
||||
compatible = "rockchip,rk809";
|
||||
reg = <0x20>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "xin32k";
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int>;
|
||||
system-power-controller;
|
||||
wakeup-source;
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc5-supply = <&vcc_3v3>;
|
||||
vcc6-supply = <&vcc_3v3>;
|
||||
vcc7-supply = <&vcc_3v3>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulators {
|
||||
vdd_log: DCDC_REG1 {
|
||||
regulator-name = "vdd_log";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <950000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <950000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_arm: DCDC_REG2 {
|
||||
regulator-name = "vdd_arm";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <950000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <950000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v0_1v8: vcc_emmc: DCDC_REG4 {
|
||||
regulator-name = "vcc_3v0_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3: DCDC_REG5 {
|
||||
regulator-name = "vcc_3v3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: LDO_REG2 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v0: LDO_REG3 {
|
||||
regulator-name = "vcc_1v0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_2v8: LDO_REG4 {
|
||||
regulator-name = "vcc_2v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <2800000>;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* vccio_sd also supplies the vmmc supply on prototypes
|
||||
* with sd-slots, so needs to stay single voltage for
|
||||
* those. Production models don't have sd-slots anymore
|
||||
* and only supply vccio2 from this regulator.
|
||||
*/
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
/* vcc_sdio also supplies the pull-up resistors for i2c1 */
|
||||
vcc_sdio: LDO_REG6 {
|
||||
regulator-name = "vcc_sdio";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_lcd: LDO_REG7 {
|
||||
regulator-name = "vcc_lcd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_lcd: LDO_REG8 {
|
||||
regulator-name = "vcc_1v8_lcd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8: LDO_REG9 {
|
||||
regulator-name = "vcca_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
clock-frequency = <100000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
clock-frequency = <100000>;
|
||||
i2c-scl-falling-time-ns = <50>;
|
||||
i2c-scl-rising-time-ns = <300>;
|
||||
status = "okay";
|
||||
|
||||
touchscreen@14 {
|
||||
compatible = "goodix,gt911";
|
||||
reg = <0x14>;
|
||||
AVDD28-supply = <&vcc_2v8>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA1 IRQ_TYPE_LEVEL_LOW>;
|
||||
irq-gpios = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&tch_int &tch_rst>;
|
||||
reset-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
|
||||
touchscreen-inverted-x;
|
||||
VDDIO-supply = <&vcc_3v3>;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* Enable pull-ups to prevent floating pins when the touch
|
||||
* panel is not connected.
|
||||
*/
|
||||
&i2c2_xfer {
|
||||
rockchip,pins =
|
||||
<2 RK_PB7 2 &pcfg_pull_up>,
|
||||
<2 RK_PC0 2 &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
vccio1-supply = <&vcc_sdio>;
|
||||
vccio2-supply = <&vccio_sd>;
|
||||
vccio3-supply = <&vcc_3v3>;
|
||||
vccio4-supply = <&vcc_3v3>;
|
||||
vccio5-supply = <&vcc_1v8>;
|
||||
vccio6-supply = <&vcc_emmc>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio {
|
||||
dp83825: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&phy_rst>;
|
||||
reset-assert-us = <50000>;
|
||||
reset-deassert-us = <50000>;
|
||||
reset-gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cobra_pin_hog>;
|
||||
|
||||
hog {
|
||||
cobra_pin_hog: cobra-pin-hog {
|
||||
rockchip,pins =
|
||||
/* USB_HUB2_RESET */
|
||||
<0 RK_PA5 RK_FUNC_GPIO &pcfg_output_high>,
|
||||
/* USB_HUB1_RESET */
|
||||
<0 RK_PB4 RK_FUNC_GPIO &pcfg_output_high>,
|
||||
/* The default pull-down can keep the IC in reset. */
|
||||
<3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>,
|
||||
/* USB-A 5V enable */
|
||||
<3 RK_PC0 RK_FUNC_GPIO &pcfg_output_high>,
|
||||
/* USB-A data enable */
|
||||
<3 RK_PD3 RK_FUNC_GPIO &pcfg_output_high>;
|
||||
};
|
||||
};
|
||||
|
||||
emmc {
|
||||
emmc_reset: emmc-reset {
|
||||
rockchip,pins =
|
||||
<1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
ethernet {
|
||||
phy_rst: phy-rst {
|
||||
rockchip,pins =
|
||||
<2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
heartbeat_led_pin: heartbeat-led-pin {
|
||||
rockchip,pins =
|
||||
<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
panel {
|
||||
dsp_rst: dsp-rst {
|
||||
rockchip,pins =
|
||||
<0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
tch_int: tch-int {
|
||||
rockchip,pins =
|
||||
<0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
tch_rst: tch-rst {
|
||||
rockchip,pins =
|
||||
<0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int: pmic-int {
|
||||
rockchip,pins =
|
||||
<0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
pmuio1-supply = <&vcc_3v3>;
|
||||
pmuio2-supply = <&vcc_3v3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm6 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm7 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy_host {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
/delete-property/ dmas;
|
||||
/delete-property/ dma-names;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart5 {
|
||||
pinctrl-0 = <&uart5_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb20_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopb_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopl {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&vopl_mmu {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&wdt {
|
||||
status = "okay";
|
||||
};
|
||||
@@ -0,0 +1,39 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2025 Cherry Embedded Solutions GmbH
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "px30-pp1516.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Theobroma Systems PP-1516 with LTK050H3146W-A2 Display";
|
||||
compatible = "tsd,px30-pp1516-ltk050h3146w-a2", "tsd,px30-pp1516", "rockchip,px30";
|
||||
};
|
||||
|
||||
&dsi {
|
||||
status = "okay";
|
||||
|
||||
panel@0 {
|
||||
compatible = "leadtek,ltk050h3146w-a2";
|
||||
reg = <0>;
|
||||
backlight = <&backlight>;
|
||||
iovcc-supply = <&vcc_1v8>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&dsp_rst>;
|
||||
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
|
||||
vci-supply = <&vcc_2v8>;
|
||||
|
||||
port {
|
||||
mipi_in_panel: endpoint {
|
||||
remote-endpoint = <&mipi_out_panel>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&dsi_out {
|
||||
mipi_out_panel: endpoint {
|
||||
remote-endpoint = <&mipi_in_panel>;
|
||||
};
|
||||
};
|
||||
@@ -0,0 +1,39 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2025 Cherry Embedded Solutions GmbH
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "px30-pp1516.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Theobroma Systems PP-1516 with LTK050H3148W Display";
|
||||
compatible = "tsd,px30-pp1516-ltk050h3148w", "tsd,px30-pp1516", "rockchip,px30";
|
||||
};
|
||||
|
||||
&dsi {
|
||||
status = "okay";
|
||||
|
||||
panel@0 {
|
||||
compatible = "leadtek,ltk050h3148w";
|
||||
reg = <0>;
|
||||
backlight = <&backlight>;
|
||||
iovcc-supply = <&vcc_1v8>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&dsp_rst>;
|
||||
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
|
||||
vci-supply = <&vcc_2v8>;
|
||||
|
||||
port {
|
||||
mipi_in_panel: endpoint {
|
||||
remote-endpoint = <&mipi_out_panel>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&dsi_out {
|
||||
mipi_out_panel: endpoint {
|
||||
remote-endpoint = <&mipi_in_panel>;
|
||||
};
|
||||
};
|
||||
@@ -0,0 +1,602 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2025 Cherry Embedded Solutions GmbH
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include "px30.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
mmc0 = &emmc;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial5:115200n8";
|
||||
};
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
power-supply = <&vcc5v0_sys>;
|
||||
pwms = <&pwm0 0 25000 0>;
|
||||
};
|
||||
|
||||
beeper {
|
||||
compatible = "pwm-beeper";
|
||||
pwms = <&pwm1 0 1000 0>;
|
||||
};
|
||||
|
||||
emmc_pwrseq: emmc-pwrseq {
|
||||
compatible = "mmc-pwrseq-emmc";
|
||||
pinctrl-0 = <&emmc_reset>;
|
||||
pinctrl-names = "default";
|
||||
reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&debug_led_pin>, <&heartbeat_led_pin>;
|
||||
|
||||
/*
|
||||
* LED2 on the PCB, left of the USB-C connector.
|
||||
* Typically NOT populated.
|
||||
*/
|
||||
debug: led-0 {
|
||||
label = "debug";
|
||||
gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "none";
|
||||
};
|
||||
|
||||
/*
|
||||
* LED14 on the PCB, left of the PX30 SoC.
|
||||
* Typically NOT populated.
|
||||
*/
|
||||
heartbeat: led-1 {
|
||||
label = "heartbeat";
|
||||
gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
|
||||
vcc5v0_sys: regulator-vccsys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc_cam_avdd: regulator-vcc-cam-avdd {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_cam_avdd";
|
||||
gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cam_avdd_en>;
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
vin-supply = <&vcc_2v8>;
|
||||
};
|
||||
|
||||
vcc_cam_dovdd: regulator-vcc-cam-dovdd {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_cam_dovdd";
|
||||
gpio = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cam_dovdd_en>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_1v8>;
|
||||
};
|
||||
|
||||
vcc_cam_dvdd: regulator-vcc-cam-dvdd {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_cam_dvdd";
|
||||
gpio = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cam_dvdd_en>;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
vin-supply = <&vcc_3v3>;
|
||||
};
|
||||
|
||||
vcc_lens_afvdd: regulator-vcc-lens-afvdd {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_lens_afvdd";
|
||||
gpio = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cam_afvdd_en>;
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
vin-supply = <&vcc_2v8>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&csi_dphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&display_subsystem {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dsi_dphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&emmc {
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
/*
|
||||
* For hs200 support, U-Boot would have to set the RK809 DCDC4
|
||||
* rail to 1.8V from the default of 3.0V. It doesn't do that on
|
||||
* devices out in the field, so disable hs200.
|
||||
* mmc-hs200-1_8v;
|
||||
*/
|
||||
mmc-pwrseq = <&emmc_pwrseq>;
|
||||
non-removable;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&vcc_emmc>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_log>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* I2C0 = PMIC, Touchscreen */
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
touchscreen@14 {
|
||||
compatible = "goodix,gt911";
|
||||
reg = <0x14>;
|
||||
AVDD28-supply = <&vcc_2v8>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA1 IRQ_TYPE_LEVEL_LOW>;
|
||||
irq-gpios = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&tch_int &tch_rst>;
|
||||
reset-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
|
||||
VDDIO-supply = <&vcc_3v3>;
|
||||
};
|
||||
|
||||
rk809: pmic@20 {
|
||||
compatible = "rockchip,rk809";
|
||||
reg = <0x20>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "xin32k";
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int>;
|
||||
system-power-controller;
|
||||
wakeup-source;
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc5-supply = <&vcc_3v3>;
|
||||
vcc6-supply = <&vcc_3v3>;
|
||||
vcc7-supply = <&vcc_3v3>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulators {
|
||||
vdd_log: DCDC_REG1 {
|
||||
regulator-name = "vdd_log";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <950000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <950000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_arm: DCDC_REG2 {
|
||||
regulator-name = "vdd_arm";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <950000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <950000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v0_1v8: vcc_emmc: DCDC_REG4 {
|
||||
regulator-name = "vcc_3v0_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3: DCDC_REG5 {
|
||||
regulator-name = "vcc_3v3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: LDO_REG2 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v0: LDO_REG3 {
|
||||
regulator-name = "vcc_1v0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_2v8: LDO_REG4 {
|
||||
regulator-name = "vcc_2v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <2800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_sdio: LDO_REG6 {
|
||||
regulator-name = "vcc_sdio";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_lcd: LDO_REG7 {
|
||||
regulator-name = "vcc_lcd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_lcd: LDO_REG8 {
|
||||
regulator-name = "vcc_1v8_lcd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8: LDO_REG9 {
|
||||
regulator-name = "vcca_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
clock-frequency = <100000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* I2C2 = Accelerometer + Camera */
|
||||
&i2c2 {
|
||||
/* MEMSIC MXC4005 accelerometer is rated for I2C Fast Mode (<=400KHz) */
|
||||
/* OmniVision OV5675 camera is rated for I2C Fast Mode (<=400KHz) */
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
focus: focus@c {
|
||||
compatible = "dongwoon,dw9714";
|
||||
reg = <0xc>;
|
||||
vcc-supply = <&vcc_lens_afvdd>;
|
||||
};
|
||||
|
||||
accel@15 {
|
||||
compatible = "memsic,mxc4005";
|
||||
reg = <0x15>;
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&accel_int>;
|
||||
};
|
||||
|
||||
camera@36 {
|
||||
compatible = "ovti,ov5675";
|
||||
reg = <0x36>;
|
||||
clocks = <&cru SCLK_CIF_OUT>;
|
||||
assigned-clocks = <&cru SCLK_CIF_OUT>;
|
||||
assigned-clock-rates = <19200000>;
|
||||
avdd-supply = <&vcc_cam_avdd>;
|
||||
dvdd-supply = <&vcc_cam_dvdd>;
|
||||
dovdd-supply = <&vcc_cam_dovdd>;
|
||||
lens-focus = <&focus>;
|
||||
orientation = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cif_clkout_m0 &cam_pwdn>;
|
||||
reset-gpios = <&gpio2 RK_PB0 GPIO_ACTIVE_LOW>;
|
||||
rotation = <0>;
|
||||
|
||||
port {
|
||||
ucam_out: endpoint {
|
||||
remote-endpoint = <&mipi_in_ucam>;
|
||||
data-lanes = <1 2>;
|
||||
link-frequencies = /bits/ 64 <450000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
vccio1-supply = <&vcc_sdio>;
|
||||
vccio2-supply = <&vccio_sd>;
|
||||
vccio3-supply = <&vcc_1v8>;
|
||||
vccio4-supply = <&vcc_3v3>;
|
||||
vccio5-supply = <&vcc_3v3>;
|
||||
vccio6-supply = <&vcc_emmc>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&isp {
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
port@0 {
|
||||
mipi_in_ucam: endpoint@0 {
|
||||
reg = <0>;
|
||||
data-lanes = <1 2>;
|
||||
remote-endpoint = <&ucam_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&isp_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
accel {
|
||||
accel_int: accel-int {
|
||||
rockchip,pins =
|
||||
<2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
camera {
|
||||
cam_afvdd_en: cam-afvdd-en {
|
||||
rockchip,pins =
|
||||
<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
cam_avdd_en: cam-avdd-en {
|
||||
rockchip,pins =
|
||||
<3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
cam_dovdd_en: cam-dovdd-en {
|
||||
rockchip,pins =
|
||||
<3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
cam_dvdd_en: cam-dvdd-en {
|
||||
rockchip,pins =
|
||||
<3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
cam_pwdn: cam-pwdn {
|
||||
rockchip,pins =
|
||||
<2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
emmc {
|
||||
emmc_reset: emmc-reset {
|
||||
rockchip,pins =
|
||||
<1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
debug_led_pin: debug-led-pin {
|
||||
rockchip,pins =
|
||||
<3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
heartbeat_led_pin: heartbeat-led-pin {
|
||||
rockchip,pins =
|
||||
<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
panel {
|
||||
dsp_rst: dsp-rst {
|
||||
rockchip,pins =
|
||||
<0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
tch_int: tch-int {
|
||||
rockchip,pins =
|
||||
<0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
tch_rst: tch-rst {
|
||||
rockchip,pins =
|
||||
<0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int: pmic-int {
|
||||
rockchip,pins =
|
||||
<0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
pmuio1-supply = <&vcc_3v3>;
|
||||
pmuio2-supply = <&vcc_3v3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy_host {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart5 {
|
||||
pinctrl-0 = <&uart5_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb20_otg {
|
||||
dr_mode = "peripheral";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopb_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wdt {
|
||||
status = "okay";
|
||||
};
|
||||
@@ -83,9 +83,7 @@
|
||||
|
||||
/* On-module TI DP83825I PHY but no connector, enable in carrierboard */
|
||||
&gmac {
|
||||
snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 50000 50000>;
|
||||
phy-handle = <&dp83825>;
|
||||
phy-supply = <&vcc_3v3>;
|
||||
clock_in_out = "output";
|
||||
};
|
||||
@@ -344,6 +342,18 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio {
|
||||
dp83825: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&phy_rst>;
|
||||
reset-assert-us = <50000>;
|
||||
reset-deassert-us = <50000>;
|
||||
reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
emmc {
|
||||
emmc_reset: emmc-reset {
|
||||
@@ -351,6 +361,12 @@
|
||||
};
|
||||
};
|
||||
|
||||
ethernet {
|
||||
phy_rst: phy-rst {
|
||||
rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
module_led_pin: module-led-pin {
|
||||
rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
|
||||
@@ -985,6 +985,12 @@
|
||||
resets = <&cru SRST_GMAC_A>;
|
||||
reset-names = "stmmaceth";
|
||||
status = "disabled";
|
||||
|
||||
mdio: mdio {
|
||||
compatible = "snps,dwmac-mdio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
sdmmc: mmc@ff370000 {
|
||||
|
||||
@@ -0,0 +1,494 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2025 Rockchip Electronics Co., Ltd.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "rk3399.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Rockchip RK3399 EVB IND LPDDR4 Board";
|
||||
compatible = "rockchip,rk3399-evb-ind", "rockchip,rk3399";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
vcc5v0_sys: regulator-vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&vdd_cpu_b>;
|
||||
};
|
||||
|
||||
&cpu_b1 {
|
||||
cpu-supply = <&vdd_cpu_b>;
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&emmc_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdmi_i2c_xfer>, <&hdmi_cec>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
clock-frequency = <400000>;
|
||||
i2c-scl-falling-time-ns = <4>;
|
||||
i2c-scl-rising-time-ns = <168>;
|
||||
status = "okay";
|
||||
|
||||
vdd_gpu: regulator@10 {
|
||||
compatible = "tcs,tcs4525";
|
||||
reg = <0x10>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vsel2_gpio>;
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-ramp-delay = <1000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_b: regulator@1c {
|
||||
compatible = "tcs,tcs4525";
|
||||
reg = <0x1c>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vsel1_gpio>;
|
||||
regulator-name = "vdd_cpu_b";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-ramp-delay = <1000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
rk809: pmic@20 {
|
||||
compatible = "rockchip,rk809";
|
||||
reg = <0x20>;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "xin32k", "rk808-clkout2";
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <RK_PC5 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l>;
|
||||
wakeup-source;
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc5-supply = <&vcc_buck5>;
|
||||
vcc6-supply = <&vcc_buck5>;
|
||||
vcc7-supply = <&vcc5v0_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulators {
|
||||
vdd_center: DCDC_REG1 {
|
||||
regulator-name = "vdd_center";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_l: DCDC_REG2 {
|
||||
regulator-name = "vdd_cpu_l";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sys: DCDC_REG4 {
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_buck5: DCDC_REG5 {
|
||||
regulator-name = "vcc_buck5";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <2200000>;
|
||||
regulator-min-microvolt = <2200000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <2200000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_0v9: LDO_REG1 {
|
||||
regulator-name = "vcca_0v9";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-min-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: LDO_REG2 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc0v9_soc: LDO_REG3 {
|
||||
regulator-name = "vcc0v9_soc";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-min-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8: LDO_REG4 {
|
||||
regulator-name = "vcca_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd1v5_dvp: LDO_REG5 {
|
||||
regulator-name = "vdd1v5_dvp";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-min-microvolt = <1500000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v5: LDO_REG6 {
|
||||
regulator-name = "vcc_1v5";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-min-microvolt = <1500000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v0: LDO_REG7 {
|
||||
regulator-name = "vcc_3v0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG8 {
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_sd: LDO_REG9 {
|
||||
regulator-name = "vcc_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc5v0_usb: SWITCH_REG1 {
|
||||
regulator-name = "vcc5v0_usb";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_3v3: SWITCH_REG2 {
|
||||
regulator-name = "vccio_3v3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2s2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
audio-supply = <&vcca_1v8>;
|
||||
bt656-supply = <&vcc_3v0>;
|
||||
gpio1830-supply = <&vcc_3v0>;
|
||||
sdmmc-supply = <&vccio_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
vsel1_gpio: vsel1 {
|
||||
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
vsel2_gpio: vsel2 {
|
||||
rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
pmu1830-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
keep-power-in-suspend;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc_sd>;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tcphy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tcphy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
/* tshut mode 0:CRU 1:GPIO */
|
||||
rockchip,hw-tshut-mode = <1>;
|
||||
/* tshut polarity 0:LOW 1:HIGH */
|
||||
rockchip,hw-tshut-polarity = <1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0_host {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1_host {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd3_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd3_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3_1 {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopb_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopl {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopl_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
@@ -312,14 +312,6 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@@ -60,16 +60,6 @@
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_host: regulator-vcc5v0-host {
|
||||
compatible = "regulator-fixed";
|
||||
gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_host_en>;
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-always-on;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: regulator-vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
@@ -527,10 +517,10 @@
|
||||
};
|
||||
};
|
||||
|
||||
usb2 {
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
usb {
|
||||
cy3304_reset: cy3304-reset {
|
||||
rockchip,pins =
|
||||
<4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
<4 RK_PA3 RK_FUNC_GPIO &pcfg_output_high>;
|
||||
};
|
||||
};
|
||||
|
||||
@@ -595,11 +585,6 @@
|
||||
u2phy1_otg: otg-port {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
u2phy1_host: host-port {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&usbdrd3_1 {
|
||||
@@ -609,12 +594,27 @@
|
||||
&usbdrd_dwc3_1 {
|
||||
status = "okay";
|
||||
dr_mode = "host";
|
||||
};
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cy3304_reset>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
hub_2_0: hub@1 {
|
||||
compatible = "usb4b4,6502", "usb4b4,6506";
|
||||
reg = <1>;
|
||||
peer-hub = <&hub_3_0>;
|
||||
reset-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
vdd-supply = <&vcc1v2_phy>;
|
||||
vdd2-supply = <&vcc3v3_sys>;
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
hub_3_0: hub@2 {
|
||||
compatible = "usb4b4,6500", "usb4b4,6504";
|
||||
reg = <2>;
|
||||
peer-hub = <&hub_2_0>;
|
||||
reset-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
vdd-supply = <&vcc1v2_phy>;
|
||||
vdd2-supply = <&vcc3v3_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
@@ -17,7 +17,11 @@
|
||||
compatible = "radxa,e20c", "rockchip,rk3528";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac1;
|
||||
i2c1 = &i2c1;
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc;
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
@@ -130,6 +134,18 @@
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vccio_sd: regulator-vccio-sd {
|
||||
compatible = "regulator-gpio";
|
||||
gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_vol_ctrl_h>;
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
states = <1800000 0x0>, <3300000 0x1>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vdd_arm: regulator-vdd-arm {
|
||||
compatible = "pwm-regulator";
|
||||
pwms = <&pwm1 0 5000 PWM_POLARITY_INVERTED>;
|
||||
@@ -171,6 +187,17 @@
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
clock_in_out = "output";
|
||||
phy-handle = <&rgmii_phy>;
|
||||
phy-mode = "rgmii-id";
|
||||
phy-supply = <&vcc_3v3>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii_miim>, <&rgmii_tx_bus2>, <&rgmii_rx_bus2>,
|
||||
<&rgmii_rgmii_clk>, <&rgmii_rgmii_bus>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1m0_xfer>;
|
||||
@@ -185,7 +212,25 @@
|
||||
};
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
rgmii_phy: ethernet-phy@1 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac1_rstn_l>;
|
||||
reset-assert-us = <20000>;
|
||||
reset-deassert-us = <100000>;
|
||||
reset-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
ethernet {
|
||||
gmac1_rstn_l: gmac1-rstn-l {
|
||||
rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
user_key: user-key {
|
||||
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
@@ -205,6 +250,12 @@
|
||||
rockchip,pins = <4 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
sdmmc {
|
||||
sdmmc_vol_ctrl_h: sdmmc-vol-ctrl-h {
|
||||
rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
@@ -235,6 +286,17 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0m0_xfer>;
|
||||
|
||||
@@ -24,22 +24,6 @@
|
||||
gpio2 = &gpio2;
|
||||
gpio3 = &gpio3;
|
||||
gpio4 = &gpio4;
|
||||
i2c0 = &i2c0;
|
||||
i2c1 = &i2c1;
|
||||
i2c2 = &i2c2;
|
||||
i2c3 = &i2c3;
|
||||
i2c4 = &i2c4;
|
||||
i2c5 = &i2c5;
|
||||
i2c6 = &i2c6;
|
||||
i2c7 = &i2c7;
|
||||
serial0 = &uart0;
|
||||
serial1 = &uart1;
|
||||
serial2 = &uart2;
|
||||
serial3 = &uart3;
|
||||
serial4 = &uart4;
|
||||
serial5 = &uart5;
|
||||
serial6 = &uart6;
|
||||
serial7 = &uart7;
|
||||
};
|
||||
|
||||
cpus {
|
||||
@@ -329,6 +313,16 @@
|
||||
reg = <0x0 0xff280400 0x0 0x20>;
|
||||
};
|
||||
|
||||
vpu_grf: syscon@ff340000 {
|
||||
compatible = "rockchip,rk3528-vpu-grf", "syscon";
|
||||
reg = <0x0 0xff340000 0x0 0x8000>;
|
||||
};
|
||||
|
||||
vo_grf: syscon@ff360000 {
|
||||
compatible = "rockchip,rk3528-vo-grf", "syscon";
|
||||
reg = <0x0 0xff360000 0x0 0x10000>;
|
||||
};
|
||||
|
||||
cru: clock-controller@ff4a0000 {
|
||||
compatible = "rockchip,rk3528-cru";
|
||||
reg = <0x0 0xff4a0000 0x0 0x30000>;
|
||||
@@ -667,6 +661,111 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gmac0: ethernet@ffbd0000 {
|
||||
compatible = "rockchip,rk3528-gmac", "snps,dwmac-4.20a";
|
||||
reg = <0x0 0xffbd0000 0x0 0x10000>;
|
||||
clocks = <&cru CLK_GMAC0_SRC>, <&cru CLK_GMAC0_RMII_50M>,
|
||||
<&cru CLK_GMAC0_RX>, <&cru CLK_GMAC0_TX>,
|
||||
<&cru PCLK_MAC_VO>, <&cru ACLK_MAC_VO>;
|
||||
clock-names = "stmmaceth", "clk_mac_ref",
|
||||
"mac_clk_rx", "mac_clk_tx",
|
||||
"pclk_mac", "aclk_mac";
|
||||
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "macirq", "eth_wake_irq";
|
||||
phy-handle = <&rmii0_phy>;
|
||||
phy-mode = "rmii";
|
||||
resets = <&cru SRST_A_MAC_VO>;
|
||||
reset-names = "stmmaceth";
|
||||
rockchip,grf = <&vo_grf>;
|
||||
snps,axi-config = <&gmac0_stmmac_axi_setup>;
|
||||
snps,mixed-burst;
|
||||
snps,mtl-rx-config = <&gmac0_mtl_rx_setup>;
|
||||
snps,mtl-tx-config = <&gmac0_mtl_tx_setup>;
|
||||
snps,tso;
|
||||
status = "disabled";
|
||||
|
||||
mdio0: mdio {
|
||||
compatible = "snps,dwmac-mdio";
|
||||
#address-cells = <0x1>;
|
||||
#size-cells = <0x0>;
|
||||
|
||||
rmii0_phy: ethernet-phy@2 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x2>;
|
||||
clocks = <&cru CLK_MACPHY>;
|
||||
phy-is-integrated;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&fephym0_led_link>,
|
||||
<&fephym0_led_spd>;
|
||||
resets = <&cru SRST_MACPHY>;
|
||||
};
|
||||
};
|
||||
|
||||
gmac0_stmmac_axi_setup: stmmac-axi-config {
|
||||
snps,blen = <0 0 0 0 16 8 4>;
|
||||
snps,rd_osr_lmt = <8>;
|
||||
snps,wr_osr_lmt = <4>;
|
||||
};
|
||||
|
||||
gmac0_mtl_rx_setup: rx-queues-config {
|
||||
snps,rx-queues-to-use = <1>;
|
||||
queue0 {};
|
||||
};
|
||||
|
||||
gmac0_mtl_tx_setup: tx-queues-config {
|
||||
snps,tx-queues-to-use = <1>;
|
||||
queue0 {};
|
||||
};
|
||||
};
|
||||
|
||||
gmac1: ethernet@ffbe0000 {
|
||||
compatible = "rockchip,rk3528-gmac", "snps,dwmac-4.20a";
|
||||
reg = <0x0 0xffbe0000 0x0 0x10000>;
|
||||
clocks = <&cru CLK_GMAC1_SRC_VPU>,
|
||||
<&cru CLK_GMAC1_RMII_VPU>,
|
||||
<&cru PCLK_MAC_VPU>,
|
||||
<&cru ACLK_MAC_VPU>;
|
||||
clock-names = "stmmaceth",
|
||||
"clk_mac_ref",
|
||||
"pclk_mac",
|
||||
"aclk_mac";
|
||||
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "macirq", "eth_wake_irq";
|
||||
resets = <&cru SRST_A_MAC>;
|
||||
reset-names = "stmmaceth";
|
||||
rockchip,grf = <&vpu_grf>;
|
||||
snps,axi-config = <&gmac1_stmmac_axi_setup>;
|
||||
snps,mixed-burst;
|
||||
snps,mtl-rx-config = <&gmac1_mtl_rx_setup>;
|
||||
snps,mtl-tx-config = <&gmac1_mtl_tx_setup>;
|
||||
snps,tso;
|
||||
status = "disabled";
|
||||
|
||||
mdio1: mdio {
|
||||
compatible = "snps,dwmac-mdio";
|
||||
#address-cells = <0x1>;
|
||||
#size-cells = <0x0>;
|
||||
};
|
||||
|
||||
gmac1_stmmac_axi_setup: stmmac-axi-config {
|
||||
snps,blen = <0 0 0 0 16 8 4>;
|
||||
snps,rd_osr_lmt = <8>;
|
||||
snps,wr_osr_lmt = <4>;
|
||||
};
|
||||
|
||||
gmac1_mtl_rx_setup: rx-queues-config {
|
||||
snps,rx-queues-to-use = <1>;
|
||||
queue0 {};
|
||||
};
|
||||
|
||||
gmac1_mtl_tx_setup: tx-queues-config {
|
||||
snps,tx-queues-to-use = <1>;
|
||||
queue0 {};
|
||||
};
|
||||
};
|
||||
|
||||
sdhci: mmc@ffbf0000 {
|
||||
compatible = "rockchip,rk3528-dwcmshc",
|
||||
"rockchip,rk3588-dwcmshc";
|
||||
@@ -691,6 +790,65 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sdio0: mmc@ffc10000 {
|
||||
compatible = "rockchip,rk3528-dw-mshc",
|
||||
"rockchip,rk3288-dw-mshc";
|
||||
reg = <0x0 0xffc10000 0x0 0x4000>;
|
||||
clocks = <&cru HCLK_SDIO0>,
|
||||
<&cru CCLK_SRC_SDIO0>,
|
||||
<&cru SCLK_SDIO0_DRV>,
|
||||
<&cru SCLK_SDIO0_SAMPLE>;
|
||||
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
|
||||
fifo-depth = <0x100>;
|
||||
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
|
||||
max-frequency = <200000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdio0_bus4>, <&sdio0_clk>, <&sdio0_cmd>;
|
||||
resets = <&cru SRST_H_SDIO0>;
|
||||
reset-names = "reset";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sdio1: mmc@ffc20000 {
|
||||
compatible = "rockchip,rk3528-dw-mshc",
|
||||
"rockchip,rk3288-dw-mshc";
|
||||
reg = <0x0 0xffc20000 0x0 0x4000>;
|
||||
clocks = <&cru HCLK_SDIO1>,
|
||||
<&cru CCLK_SRC_SDIO1>,
|
||||
<&cru SCLK_SDIO1_DRV>,
|
||||
<&cru SCLK_SDIO1_SAMPLE>;
|
||||
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
|
||||
fifo-depth = <0x100>;
|
||||
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
|
||||
max-frequency = <200000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdio1_bus4>, <&sdio1_clk>, <&sdio1_cmd>;
|
||||
resets = <&cru SRST_H_SDIO1>;
|
||||
reset-names = "reset";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sdmmc: mmc@ffc30000 {
|
||||
compatible = "rockchip,rk3528-dw-mshc",
|
||||
"rockchip,rk3288-dw-mshc";
|
||||
reg = <0x0 0xffc30000 0x0 0x4000>;
|
||||
clocks = <&cru HCLK_SDMMC0>,
|
||||
<&cru CCLK_SRC_SDMMC0>,
|
||||
<&cru SCLK_SDMMC_DRV>,
|
||||
<&cru SCLK_SDMMC_SAMPLE>;
|
||||
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
|
||||
fifo-depth = <0x100>;
|
||||
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
|
||||
max-frequency = <150000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_bus4>, <&sdmmc_clk>, <&sdmmc_cmd>,
|
||||
<&sdmmc_det>;
|
||||
resets = <&cru SRST_H_SDMMC0>;
|
||||
reset-names = "reset";
|
||||
rockchip,default-sample-phase = <90>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
dmac: dma-controller@ffd60000 {
|
||||
compatible = "arm,pl330", "arm,primecell";
|
||||
reg = <0x0 0xffd60000 0x0 0x4000>;
|
||||
|
||||
@@ -0,0 +1,456 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2024-2025 Rockchip Electronics Co., Ltd.
|
||||
*
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include "rk3562.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Rockchip RK3562 EVB V20 Board";
|
||||
compatible = "rockchip,rk3562-evb2-v10", "rockchip,rk3562";
|
||||
|
||||
chosen: chosen {
|
||||
stdout-path = "serial0:1500000n8";
|
||||
};
|
||||
|
||||
adc_keys: adc-keys {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc0 1>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1800000>;
|
||||
poll-interval = <100>;
|
||||
|
||||
button-vol-up {
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
label = "volume up";
|
||||
press-threshold-microvolt = <17000>;
|
||||
};
|
||||
|
||||
button-vol-down {
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
label = "volume down";
|
||||
press-threshold-microvolt = <414000>;
|
||||
};
|
||||
|
||||
button-menu {
|
||||
linux,code = <KEY_MENU>;
|
||||
label = "menu";
|
||||
press-threshold-microvolt = <800000>;
|
||||
};
|
||||
|
||||
button-back {
|
||||
linux,code = <KEY_BACK>;
|
||||
label = "back";
|
||||
press-threshold-microvolt = <1200000>;
|
||||
};
|
||||
};
|
||||
|
||||
leds: leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
work_led: led-0 {
|
||||
gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&rk809 1>;
|
||||
clock-names = "ext_clock";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
|
||||
/*
|
||||
* On the module itself this is one of these (depending
|
||||
* on the actual card populated):
|
||||
* - SDIO_RESET_L_WL_REG_ON
|
||||
* - PDN (power down when low)
|
||||
*/
|
||||
post-power-on-delay-ms = <200>;
|
||||
reset-gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
vcc12v_dcin: regulator-vcc12v-dcin {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc12v_dcin";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie20: regulator-vcc3v3-pcie20 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_pcie20";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
enable-active-high;
|
||||
gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
|
||||
startup-delay-us = <5000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: regulator-vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc5v0_usb: regulator-vcc5v0-usb {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_usb";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc5v0_usb_host: regulator-vcc5v0-usb-host {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_usb_host";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
|
||||
vin-supply = <&vcc5v0_usb>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb_host_pwren>;
|
||||
};
|
||||
|
||||
vcc5v0_usb_otg: regulator-vcc5v0-usb-otg {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_usb_otg";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
|
||||
vin-supply = <&vcc5v0_usb>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb_otg_pwren>;
|
||||
};
|
||||
|
||||
vcc3v3_clk: regulator-vcc3v3-clk {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_clk";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: regulator-vcc-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
};
|
||||
|
||||
&combphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
rk809: pmic@20 {
|
||||
compatible = "rockchip,rk809";
|
||||
reg = <0x20>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
pinctrl-names = "default", "pmic-sleep",
|
||||
"pmic-power-off", "pmic-reset";
|
||||
pinctrl-0 = <&pmic_int>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
||||
|
||||
vcc1-supply = <&vcc3v3_sys>;
|
||||
vcc2-supply = <&vcc3v3_sys>;
|
||||
vcc3-supply = <&vcc3v3_sys>;
|
||||
vcc4-supply = <&vcc3v3_sys>;
|
||||
vcc5-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc3v3_sys>;
|
||||
|
||||
regulators {
|
||||
vdd_logic: DCDC_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu: DCDC_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: DCDC_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc2v8_dvp: LDO_REG1 {
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-name = "vcc2v8_dvp";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_0v9: LDO_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-name = "vdda_0v9";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_pmu: LDO_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-name = "vdda0v9_pmu";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_acodec: LDO_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-name = "vccio_acodec";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_pmu: LDO_REG6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc3v3_pmu";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8: LDO_REG7 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcca_1v8";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_pmu: LDO_REG8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcca1v8_pmu";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8_dvp: LDO_REG9 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc1v8_dvp";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3: SWITCH_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc_3v3";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sd: SWITCH_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc3v3_sd";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie2x1 {
|
||||
reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie20>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
usb_host_pwren: usb-host-pwren {
|
||||
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
usb_otg_pwren: usb-otg-pwren {
|
||||
rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&saradc0 {
|
||||
vref-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
non-removable;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
full-pwr-cycle-in-suspend;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc0 {
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc3v3_sd>;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc1 {
|
||||
no-sd;
|
||||
no-mmc;
|
||||
bus-width = <4>;
|
||||
disable-wp;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
keep-power-in-suspend;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
|
||||
sd-uhs-sdr104;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
|
||||
status = "okay";
|
||||
};
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -20,33 +20,43 @@
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lan1_led_pin>, <&lan2_led_pin>, <&power_led_pin>, <&wan_led_pin>;
|
||||
pinctrl-0 = <&lan1_led_pin>, <&lan2_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
|
||||
|
||||
led-lan1 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
default-state = "off";
|
||||
function = LED_FUNCTION_LAN;
|
||||
function-enumerator = <1>;
|
||||
gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
|
||||
label = "LAN-1";
|
||||
linux,default-trigger = "netdev";
|
||||
};
|
||||
|
||||
led-lan2 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
default-state = "off";
|
||||
function = LED_FUNCTION_LAN;
|
||||
function-enumerator = <2>;
|
||||
gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_HIGH>;
|
||||
label = "LAN-2";
|
||||
linux,default-trigger = "netdev";
|
||||
};
|
||||
|
||||
power_led: led-power {
|
||||
power_led: led-sys {
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
function = LED_FUNCTION_POWER;
|
||||
linux,default-trigger = "heartbeat";
|
||||
gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
|
||||
label = "SYS";
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
|
||||
led-wan {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
default-state = "off";
|
||||
function = LED_FUNCTION_WAN;
|
||||
gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
|
||||
label = "WAN";
|
||||
linux,default-trigger = "netdev";
|
||||
};
|
||||
};
|
||||
};
|
||||
@@ -126,7 +136,7 @@
|
||||
rockchip,pins = <3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
power_led_pin: power-led-pin {
|
||||
sys_led_pin: sys-led-pin {
|
||||
rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
|
||||
@@ -486,9 +486,12 @@
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
max-frequency = <200000000>;
|
||||
mmc-hs200-1_8v;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
|
||||
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
||||
@@ -152,7 +152,7 @@
|
||||
compatible = "rockchip,rk3568-pcie";
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
bus-range = <0x0 0xf>;
|
||||
bus-range = <0x10 0x1f>;
|
||||
clocks = <&cru ACLK_PCIE30X1_MST>, <&cru ACLK_PCIE30X1_SLV>,
|
||||
<&cru ACLK_PCIE30X1_DBI>, <&cru PCLK_PCIE30X1>,
|
||||
<&cru CLK_PCIE30X1_AUX_NDFT>;
|
||||
@@ -175,7 +175,7 @@
|
||||
num-ib-windows = <6>;
|
||||
num-ob-windows = <2>;
|
||||
max-link-speed = <3>;
|
||||
msi-map = <0x0 &gic 0x1000 0x1000>;
|
||||
msi-map = <0x1000 &its 0x1000 0x1000>;
|
||||
num-lanes = <1>;
|
||||
phys = <&pcie30phy>;
|
||||
phy-names = "pcie-phy";
|
||||
@@ -205,7 +205,7 @@
|
||||
compatible = "rockchip,rk3568-pcie";
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
bus-range = <0x0 0xf>;
|
||||
bus-range = <0x20 0x2f>;
|
||||
clocks = <&cru ACLK_PCIE30X2_MST>, <&cru ACLK_PCIE30X2_SLV>,
|
||||
<&cru ACLK_PCIE30X2_DBI>, <&cru PCLK_PCIE30X2>,
|
||||
<&cru CLK_PCIE30X2_AUX_NDFT>;
|
||||
@@ -228,7 +228,7 @@
|
||||
num-ib-windows = <6>;
|
||||
num-ob-windows = <2>;
|
||||
max-link-speed = <3>;
|
||||
msi-map = <0x0 &gic 0x2000 0x1000>;
|
||||
msi-map = <0x2000 &its 0x2000 0x1000>;
|
||||
num-lanes = <2>;
|
||||
phys = <&pcie30phy>;
|
||||
phy-names = "pcie-phy";
|
||||
|
||||
@@ -56,6 +56,34 @@
|
||||
};
|
||||
};
|
||||
|
||||
es8388_sound: es8388-sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
simple-audio-card,name = "On-board Analog ES8388";
|
||||
simple-audio-card,widgets = "Microphone", "Headphone Mic",
|
||||
"Microphone", "Mic Pads",
|
||||
"Headphone", "Headphone",
|
||||
"Line Out", "Line Out";
|
||||
simple-audio-card,routing = "Headphone", "LOUT1",
|
||||
"Headphone", "ROUT1",
|
||||
"Line Out", "LOUT2",
|
||||
"Line Out", "ROUT2",
|
||||
"RINPUT1", "Headphone Mic",
|
||||
"LINPUT2", "Mic Pads",
|
||||
"RINPUT2", "Mic Pads";
|
||||
simple-audio-card,pin-switches = "Headphone", "Line Out";
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&sai1>;
|
||||
};
|
||||
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&es8388>;
|
||||
system-clock-frequency = <12288000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_12v0_dcin: regulator-vcc-12v0-dcin {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_12v0_dcin";
|
||||
@@ -247,6 +275,10 @@
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdptxphy {
|
||||
status = "okay";
|
||||
};
|
||||
@@ -624,6 +656,25 @@
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
|
||||
es8388: audio-codec@10 {
|
||||
compatible = "everest,es8388", "everest,es8328";
|
||||
reg = <0x10>;
|
||||
clocks = <&cru CLK_SAI1_MCLKOUT_TO_IO>;
|
||||
AVDD-supply = <&vcca_3v3_s0>;
|
||||
DVDD-supply = <&vcc_3v3_s0>;
|
||||
HPVDD-supply = <&vcca_3v3_s0>;
|
||||
PVDD-supply = <&vcc_3v3_s0>;
|
||||
assigned-clocks = <&cru CLK_SAI1_MCLKOUT_TO_IO>;
|
||||
assigned-clock-rates = <12288000>;
|
||||
#sound-dai-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sai1m0_mclk>;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
rgmii_phy0: phy@1 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
@@ -680,6 +731,19 @@
|
||||
};
|
||||
};
|
||||
|
||||
&sai1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sai1m0_lrck
|
||||
&sai1m0_sclk
|
||||
&sai1m0_sdi0
|
||||
&sai1m0_sdo0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sai6 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
full-pwr-cycle-in-suspend;
|
||||
|
||||
@@ -413,6 +413,22 @@
|
||||
};
|
||||
};
|
||||
|
||||
hdmi_sound: hdmi-sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,name = "HDMI";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
status = "disabled";
|
||||
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&hdmi>;
|
||||
};
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&sai6>;
|
||||
};
|
||||
};
|
||||
|
||||
pmu_a53: pmu-a53 {
|
||||
compatible = "arm,cortex-a53-pmu";
|
||||
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
|
||||
@@ -1010,6 +1026,41 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sai5: sai@27d40000 {
|
||||
compatible = "rockchip,rk3576-sai";
|
||||
reg = <0x0 0x27d40000 0x0 0x1000>;
|
||||
interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cru MCLK_SAI5_8CH>, <&cru HCLK_SAI5_8CH>;
|
||||
clock-names = "mclk", "hclk";
|
||||
dmas = <&dmac2 3>;
|
||||
dma-names = "rx";
|
||||
power-domains = <&power RK3576_PD_VO0>;
|
||||
resets = <&cru SRST_M_SAI5_8CH>, <&cru SRST_H_SAI5_8CH>;
|
||||
reset-names = "m", "h";
|
||||
rockchip,sai-rx-route = <0 1 2 3>;
|
||||
#sound-dai-cells = <0>;
|
||||
sound-name-prefix = "SAI5";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sai6: sai@27d50000 {
|
||||
compatible = "rockchip,rk3576-sai";
|
||||
reg = <0x0 0x27d50000 0x0 0x1000>;
|
||||
interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cru MCLK_SAI6_8CH>, <&cru HCLK_SAI6_8CH>;
|
||||
clock-names = "mclk", "hclk";
|
||||
dmas = <&dmac2 4>, <&dmac2 5>;
|
||||
dma-names = "tx", "rx";
|
||||
power-domains = <&power RK3576_PD_VO0>;
|
||||
resets = <&cru SRST_M_SAI6_8CH>, <&cru SRST_H_SAI6_8CH>;
|
||||
reset-names = "m", "h";
|
||||
rockchip,sai-rx-route = <0 1 2 3>;
|
||||
rockchip,sai-tx-route = <0 1 2 3>;
|
||||
#sound-dai-cells = <0>;
|
||||
sound-name-prefix = "SAI6";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
hdmi: hdmi@27da0000 {
|
||||
compatible = "rockchip,rk3576-dw-hdmi-qp";
|
||||
reg = <0x0 0x27da0000 0x0 0x20000>;
|
||||
@@ -1034,6 +1085,7 @@
|
||||
reset-names = "ref", "hdp";
|
||||
rockchip,grf = <&ioc_grf>;
|
||||
rockchip,vo-grf = <&vo0_grf>;
|
||||
#sound-dai-cells = <0>;
|
||||
status = "disabled";
|
||||
|
||||
ports {
|
||||
@@ -1050,6 +1102,57 @@
|
||||
};
|
||||
};
|
||||
|
||||
sai7: sai@27ed0000 {
|
||||
compatible = "rockchip,rk3576-sai";
|
||||
reg = <0x0 0x27ed0000 0x0 0x1000>;
|
||||
interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cru MCLK_SAI7_8CH>, <&cru HCLK_SAI7_8CH>;
|
||||
clock-names = "mclk", "hclk";
|
||||
dmas = <&dmac2 19>;
|
||||
dma-names = "tx";
|
||||
power-domains = <&power RK3576_PD_VO1>;
|
||||
resets = <&cru SRST_M_SAI7_8CH>, <&cru SRST_H_SAI7_8CH>;
|
||||
reset-names = "m", "h";
|
||||
rockchip,sai-tx-route = <0 1 2 3>;
|
||||
#sound-dai-cells = <0>;
|
||||
sound-name-prefix = "SAI7";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sai8: sai@27ee0000 {
|
||||
compatible = "rockchip,rk3576-sai";
|
||||
reg = <0x0 0x27ee0000 0x0 0x1000>;
|
||||
interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cru MCLK_SAI8_8CH>, <&cru HCLK_SAI8_8CH>;
|
||||
clock-names = "mclk", "hclk";
|
||||
dmas = <&dmac1 7>;
|
||||
dma-names = "tx";
|
||||
power-domains = <&power RK3576_PD_VO1>;
|
||||
resets = <&cru SRST_M_SAI8_8CH>, <&cru SRST_H_SAI8_8CH>;
|
||||
reset-names = "m", "h";
|
||||
rockchip,sai-tx-route = <0 1 2 3>;
|
||||
#sound-dai-cells = <0>;
|
||||
sound-name-prefix = "SAI8";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sai9: sai@27ef0000 {
|
||||
compatible = "rockchip,rk3576-sai";
|
||||
reg = <0x0 0x27ef0000 0x0 0x1000>;
|
||||
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cru MCLK_SAI9_8CH>, <&cru HCLK_SAI9_8CH>;
|
||||
clock-names = "mclk", "hclk";
|
||||
dmas = <&dmac0 26>;
|
||||
dma-names = "tx";
|
||||
power-domains = <&power RK3576_PD_VO1>;
|
||||
resets = <&cru SRST_M_SAI9_8CH>, <&cru SRST_H_SAI9_8CH>;
|
||||
reset-names = "m", "h";
|
||||
rockchip,sai-tx-route = <0 1 2 3>;
|
||||
#sound-dai-cells = <0>;
|
||||
sound-name-prefix = "SAI9";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
qos_hdcp1: qos@27f02000 {
|
||||
compatible = "rockchip,rk3576-qos", "syscon";
|
||||
reg = <0x0 0x27f02000 0x0 0x20>;
|
||||
@@ -1604,6 +1707,120 @@
|
||||
};
|
||||
};
|
||||
|
||||
sai0: sai@2a600000 {
|
||||
compatible = "rockchip,rk3576-sai";
|
||||
reg = <0x0 0x2a600000 0x0 0x1000>;
|
||||
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cru MCLK_SAI0_8CH>, <&cru HCLK_SAI0_8CH>;
|
||||
clock-names = "mclk", "hclk";
|
||||
dmas = <&dmac0 0>, <&dmac0 1>;
|
||||
dma-names = "tx", "rx";
|
||||
power-domains = <&power RK3576_PD_AUDIO>;
|
||||
resets = <&cru SRST_M_SAI0_8CH>, <&cru SRST_H_SAI0_8CH>;
|
||||
reset-names = "m", "h";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sai0m0_lrck
|
||||
&sai0m0_sclk
|
||||
&sai0m0_sdi0
|
||||
&sai0m0_sdi1
|
||||
&sai0m0_sdi2
|
||||
&sai0m0_sdi3
|
||||
&sai0m0_sdo0
|
||||
&sai0m0_sdo1
|
||||
&sai0m0_sdo2
|
||||
&sai0m0_sdo3>;
|
||||
#sound-dai-cells = <0>;
|
||||
sound-name-prefix = "SAI0";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sai1: sai@2a610000 {
|
||||
compatible = "rockchip,rk3576-sai";
|
||||
reg = <0x0 0x2a610000 0x0 0x1000>;
|
||||
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cru MCLK_SAI1_8CH>, <&cru HCLK_SAI1_8CH>;
|
||||
clock-names = "mclk", "hclk";
|
||||
dmas = <&dmac0 2>, <&dmac0 3>;
|
||||
dma-names = "tx", "rx";
|
||||
power-domains = <&power RK3576_PD_AUDIO>;
|
||||
resets = <&cru SRST_M_SAI1_8CH>, <&cru SRST_H_SAI1_8CH>;
|
||||
reset-names = "m", "h";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sai1m0_lrck
|
||||
&sai1m0_sclk
|
||||
&sai1m0_sdi0
|
||||
&sai1m0_sdo0
|
||||
&sai1m0_sdo1
|
||||
&sai1m0_sdo2
|
||||
&sai1m0_sdo3>;
|
||||
#sound-dai-cells = <0>;
|
||||
sound-name-prefix = "SAI1";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sai2: sai@2a620000 {
|
||||
compatible = "rockchip,rk3576-sai";
|
||||
reg = <0x0 0x2a620000 0x0 0x1000>;
|
||||
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cru MCLK_SAI2_2CH>, <&cru HCLK_SAI2_2CH>;
|
||||
clock-names = "mclk", "hclk";
|
||||
dmas = <&dmac1 0>, <&dmac1 1>;
|
||||
dma-names = "tx", "rx";
|
||||
power-domains = <&power RK3576_PD_AUDIO>;
|
||||
resets = <&cru SRST_M_SAI2_2CH>, <&cru SRST_H_SAI2_2CH>;
|
||||
reset-names = "m", "h";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sai2m0_lrck
|
||||
&sai2m0_sclk
|
||||
&sai2m0_sdi
|
||||
&sai2m0_sdo>;
|
||||
#sound-dai-cells = <0>;
|
||||
sound-name-prefix = "SAI2";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sai3: sai@2a630000 {
|
||||
compatible = "rockchip,rk3576-sai";
|
||||
reg = <0x0 0x2a630000 0x0 0x1000>;
|
||||
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cru MCLK_SAI3_2CH>, <&cru HCLK_SAI3_2CH>;
|
||||
clock-names = "mclk", "hclk";
|
||||
dmas = <&dmac1 2>, <&dmac1 3>;
|
||||
dma-names = "tx", "rx";
|
||||
power-domains = <&power RK3576_PD_AUDIO>;
|
||||
resets = <&cru SRST_M_SAI3_2CH>, <&cru SRST_H_SAI3_2CH>;
|
||||
reset-names = "m", "h";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sai3m0_lrck
|
||||
&sai3m0_sclk
|
||||
&sai3m0_sdi
|
||||
&sai3m0_sdo>;
|
||||
#sound-dai-cells = <0>;
|
||||
sound-name-prefix = "SAI3";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sai4: sai@2a640000 {
|
||||
compatible = "rockchip,rk3576-sai";
|
||||
reg = <0x0 0x2a640000 0x0 0x1000>;
|
||||
interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cru MCLK_SAI4_2CH>, <&cru HCLK_SAI4_2CH>;
|
||||
clock-names = "mclk", "hclk";
|
||||
dmas = <&dmac2 0>, <&dmac2 1>;
|
||||
dma-names = "tx", "rx";
|
||||
power-domains = <&power RK3576_PD_AUDIO>;
|
||||
resets = <&cru SRST_M_SAI4_2CH>, <&cru SRST_H_SAI4_2CH>;
|
||||
reset-names = "m", "h";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sai4m0_lrck
|
||||
&sai4m0_sclk
|
||||
&sai4m0_sdi
|
||||
&sai4m0_sdo>;
|
||||
#sound-dai-cells = <0>;
|
||||
sound-name-prefix = "SAI4";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gic: interrupt-controller@2a701000 {
|
||||
compatible = "arm,gic-400";
|
||||
reg = <0x0 0x2a701000 0 0x10000>,
|
||||
|
||||
@@ -255,8 +255,8 @@
|
||||
edp1: edp@fded0000 {
|
||||
compatible = "rockchip,rk3588-edp";
|
||||
reg = <0x0 0xfded0000 0x0 0x1000>;
|
||||
clocks = <&cru CLK_EDP1_24M>, <&cru PCLK_EDP1>, <&cru CLK_EDP1_200M>;
|
||||
clock-names = "dp", "pclk", "spdif";
|
||||
clocks = <&cru CLK_EDP1_24M>, <&cru PCLK_EDP1>;
|
||||
clock-names = "dp", "pclk";
|
||||
interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
phys = <&hdptxphy1>;
|
||||
phy-names = "dp";
|
||||
|
||||
@@ -0,0 +1,113 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "rk3588-rock-5b.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Radxa ROCK 5B+";
|
||||
compatible = "radxa,rock-5b-plus", "rockchip,rk3588";
|
||||
|
||||
rfkill-wwan {
|
||||
compatible = "rfkill-gpio";
|
||||
label = "rfkill-m2-wwan";
|
||||
radio-type = "wwan";
|
||||
shutdown-gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
vcc3v3_4g: regulator-vcc3v3-4g {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
|
||||
/* pinctrl for the GPIO is requested by vcc3v3_pcie2x1l0 */
|
||||
regulator-name = "vcc3v3_4g";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
startup-delay-us = <50000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_wwan_pwr: regulator-vcc3v3-wwan {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wwan_power_en>;
|
||||
regulator-name = "vcc3v3_wwan_pwr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc3v3_4g>;
|
||||
};
|
||||
};
|
||||
|
||||
&gpio0 {
|
||||
wwan-disable2-n-hog {
|
||||
gpios = <RK_PB2 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "M.2 B-key W_DISABLE2#";
|
||||
gpio-hog;
|
||||
};
|
||||
};
|
||||
|
||||
&gpio2 {
|
||||
wwan-reset-n-hog {
|
||||
gpios = <RK_PB3 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "M.2 B-key RESET#";
|
||||
gpio-hog;
|
||||
};
|
||||
|
||||
wwan-wake-n-hog {
|
||||
gpios = <RK_PB2 GPIO_ACTIVE_LOW>;
|
||||
input;
|
||||
line-name = "M.2 B-key WoWWAN#";
|
||||
gpio-hog;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie30phy {
|
||||
data-lanes = <1 1 2 2>;
|
||||
};
|
||||
|
||||
&pcie3x2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie3x2_rst>;
|
||||
reset-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie30>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie3x4 {
|
||||
num-lanes = <2>;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
wwan {
|
||||
wwan_power_en: wwan-pwr-en {
|
||||
rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie3 {
|
||||
pcie3x2_rst: pcie3x2-rst {
|
||||
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&vcc5v0_host {
|
||||
enable-active-high;
|
||||
gpio = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_host_en>;
|
||||
};
|
||||
@@ -2,532 +2,11 @@
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/soc/rockchip,vop2.h>
|
||||
#include "rk3588.dtsi"
|
||||
#include "rk3588-rock-5b.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Radxa ROCK 5B";
|
||||
compatible = "radxa,rock-5b", "rockchip,rk3588";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc;
|
||||
mmc2 = &sdio;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
analog-sound {
|
||||
compatible = "audio-graph-card";
|
||||
label = "rk3588-es8316";
|
||||
|
||||
widgets = "Microphone", "Mic Jack",
|
||||
"Headphone", "Headphones";
|
||||
|
||||
routing = "MIC2", "Mic Jack",
|
||||
"Headphones", "HPOL",
|
||||
"Headphones", "HPOR";
|
||||
|
||||
dais = <&i2s0_8ch_p0>;
|
||||
hp-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hp_detect>;
|
||||
};
|
||||
|
||||
hdmi0-con {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi0_con_in: endpoint {
|
||||
remote-endpoint = <&hdmi0_out_con>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
hdmi1-con {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi1_con_in: endpoint {
|
||||
remote-endpoint = <&hdmi1_out_con>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&led_rgb_b>;
|
||||
|
||||
led_rgb_b {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
|
||||
fan: pwm-fan {
|
||||
compatible = "pwm-fan";
|
||||
cooling-levels = <0 120 150 180 210 240 255>;
|
||||
fan-supply = <&vcc5v0_sys>;
|
||||
pwms = <&pwm1 0 50000 0>;
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
|
||||
rfkill {
|
||||
compatible = "rfkill-gpio";
|
||||
label = "rfkill-m2-wlan";
|
||||
radio-type = "wlan";
|
||||
shutdown-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
rfkill-bt {
|
||||
compatible = "rfkill-gpio";
|
||||
label = "rfkill-m2-bt";
|
||||
radio-type = "bluetooth";
|
||||
shutdown-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie2x1l0: regulator-vcc3v3-pcie2x1l0 {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie2_0_vcc3v3_en>;
|
||||
regulator-name = "vcc3v3_pcie2x1l0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
startup-delay-us = <50000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie2x1l2: regulator-vcc3v3-pcie2x1l2 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_pcie2x1l2";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
startup-delay-us = <5000>;
|
||||
vin-supply = <&vcc_3v3_s3>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie30: regulator-vcc3v3-pcie30 {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie3_vcc3v3_en>;
|
||||
regulator-name = "vcc3v3_pcie30";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
startup-delay-us = <5000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_host: regulator-vcc5v0-host {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_host_en>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: regulator-vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_1v1_nldo_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&combphy0_ps {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy1_ps {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy2_psu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b1 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b2 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_b3 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi0_in {
|
||||
hdmi0_in_vp0: endpoint {
|
||||
remote-endpoint = <&vp0_out_hdmi0>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi0_out {
|
||||
hdmi0_out_con: endpoint {
|
||||
remote-endpoint = <&hdmi0_con_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi0_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi1 {
|
||||
pinctrl-0 = <&hdmim0_tx1_cec &hdmim0_tx1_hpd
|
||||
&hdmim1_tx1_scl &hdmim1_tx1_sda>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi1_in {
|
||||
hdmi1_in_vp1: endpoint {
|
||||
remote-endpoint = <&vp1_out_hdmi1>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi1_out {
|
||||
hdmi1_out_con: endpoint {
|
||||
remote-endpoint = <&hdmi1_con_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi1_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_receiver_cma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_receiver {
|
||||
hpd-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_hpd>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdptxphy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdptxphy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0m2_xfer>;
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu_big0_s0: regulator@42 {
|
||||
compatible = "rockchip,rk8602";
|
||||
reg = <0x42>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big0_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_big1_s0: regulator@43 {
|
||||
compatible = "rockchip,rk8603", "rockchip,rk8602";
|
||||
reg = <0x43>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big1_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
status = "okay";
|
||||
|
||||
hym8563: rtc@51 {
|
||||
compatible = "haoyu,hym8563";
|
||||
reg = <0x51>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "hym8563";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hym8563_int>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
status = "okay";
|
||||
|
||||
es8316: audio-codec@11 {
|
||||
compatible = "everest,es8316";
|
||||
reg = <0x11>;
|
||||
clocks = <&cru I2S0_8CH_MCLKOUT>;
|
||||
clock-names = "mclk";
|
||||
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
|
||||
assigned-clock-rates = <12288000>;
|
||||
#sound-dai-cells = <0>;
|
||||
|
||||
port {
|
||||
es8316_p0_0: endpoint {
|
||||
remote-endpoint = <&i2s0_8ch_p0_0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2s0_8ch {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s0_lrck
|
||||
&i2s0_mclk
|
||||
&i2s0_sclk
|
||||
&i2s0_sdi0
|
||||
&i2s0_sdo0>;
|
||||
status = "okay";
|
||||
|
||||
i2s0_8ch_p0: port {
|
||||
i2s0_8ch_p0_0: endpoint {
|
||||
dai-format = "i2s";
|
||||
mclk-fs = <256>;
|
||||
remote-endpoint = <&es8316_p0_0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2s5_8ch {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s6_8ch {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&package_thermal {
|
||||
polling-delay = <1000>;
|
||||
|
||||
trips {
|
||||
package_fan0: package-fan0 {
|
||||
temperature = <55000>;
|
||||
hysteresis = <2000>;
|
||||
type = "active";
|
||||
};
|
||||
|
||||
package_fan1: package-fan1 {
|
||||
temperature = <65000>;
|
||||
hysteresis = <2000>;
|
||||
type = "active";
|
||||
};
|
||||
};
|
||||
|
||||
cooling-maps {
|
||||
map0 {
|
||||
trip = <&package_fan0>;
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT 1>;
|
||||
};
|
||||
|
||||
map1 {
|
||||
trip = <&package_fan1>;
|
||||
cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie2x1l0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie2_0_rst>;
|
||||
reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie2x1l0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie2x1l2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie2_2_rst>;
|
||||
reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie2x1l2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie30phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie3x4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie3_rst>;
|
||||
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie30>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pd_gpu {
|
||||
domain-supply = <&vdd_gpu_s0>;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
hdmirx {
|
||||
hdmirx_hpd: hdmirx-5v-detection {
|
||||
rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
hym8563 {
|
||||
hym8563_int: hym8563-int {
|
||||
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
led_rgb_b: led-rgb-b {
|
||||
rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
hp_detect: hp-detect {
|
||||
rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie2 {
|
||||
pcie2_0_rst: pcie2-0-rst {
|
||||
rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie2_0_vcc3v3_en: pcie2-0-vcc-en {
|
||||
rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie2_2_rst: pcie2-2-rst {
|
||||
rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie3 {
|
||||
pcie3_rst: pcie3-rst {
|
||||
rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie3_vcc3v3_en: pcie3-vcc3v3-en {
|
||||
rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&avcc_1v8_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
non-removable;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
max-frequency = <200000000>;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
|
||||
disable-wp;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc_3v3_s3>;
|
||||
vqmmc-supply = <&vccio_sd_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdio {
|
||||
@@ -551,435 +30,23 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sfc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&fspim2_pins>;
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <104000000>;
|
||||
spi-rx-bus-width = <4>;
|
||||
spi-tx-bus-width = <1>;
|
||||
vcc-supply = <&vcc_3v3_s3>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart6 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart6m1_xfer &uart6m1_ctsn &uart6m1_rtsn>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
status = "okay";
|
||||
assigned-clocks = <&cru CLK_SPI2>;
|
||||
assigned-clock-rates = <200000000>;
|
||||
&pinctrl {
|
||||
usb {
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&vcc5v0_host {
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
|
||||
num-cs = <1>;
|
||||
|
||||
pmic@0 {
|
||||
compatible = "rockchip,rk806";
|
||||
spi-max-frequency = <1000000>;
|
||||
reg = <0x0>;
|
||||
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
|
||||
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
||||
|
||||
system-power-controller;
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc5-supply = <&vcc5v0_sys>;
|
||||
vcc6-supply = <&vcc5v0_sys>;
|
||||
vcc7-supply = <&vcc5v0_sys>;
|
||||
vcc8-supply = <&vcc5v0_sys>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
vcc10-supply = <&vcc5v0_sys>;
|
||||
vcc11-supply = <&vcc_2v0_pldo_s3>;
|
||||
vcc12-supply = <&vcc5v0_sys>;
|
||||
vcc13-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcc14-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcca-supply = <&vcc5v0_sys>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl1";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs2_null: dvs2-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs3_null: dvs3-null-pins {
|
||||
pins = "gpio_pwrctrl3";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
regulators {
|
||||
vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_gpu_s0";
|
||||
regulator-enable-ramp-delay = <400>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_cpu_lit_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_log_s0: dcdc-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_log_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_vdenc_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_s0: dcdc-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_ddr_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd2_ddr_s3: dcdc-reg6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vdd2_ddr_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_2v0_pldo_s3: dcdc-reg7 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <2000000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_2v0_pldo_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <2000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s3: dcdc-reg8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc_3v3_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vddq_ddr_s0: dcdc-reg9 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vddq_ddr_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s3: dcdc-reg10 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avcc_1v8_s0: pldo-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "avcc_1v8_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s0: pldo-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_1v2_s0: pldo-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-name = "avdd_1v2_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s0: pldo-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vcc_3v3_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd_s0: pldo-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vccio_sd_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
pldo6_s3: pldo-reg6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "pldo6_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s3: nldo-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "vdd_0v75_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_pll_s0: nldo-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-name = "vdd_ddr_pll_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_0v75_s0: nldo-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "avdd_0v75_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v85_s0: nldo-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-name = "vdd_0v85_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s0: nldo-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "vdd_0v75_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-0 = <&uart2m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2_host {
|
||||
/* connected to USB hub, which is powered by vcc5v0_sys */
|
||||
phy-supply = <&vcc5v0_sys>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy3_host {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdp_phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_xhci {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host2_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vp0 {
|
||||
vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
||||
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
||||
remote-endpoint = <&hdmi0_in_vp0>;
|
||||
};
|
||||
};
|
||||
|
||||
&vp1 {
|
||||
vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 {
|
||||
reg = <ROCKCHIP_VOP2_EP_HDMI1>;
|
||||
remote-endpoint = <&hdmi1_in_vp1>;
|
||||
};
|
||||
pinctrl-0 = <&vcc5v0_host_en>;
|
||||
};
|
||||
|
||||
@@ -0,0 +1,945 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/soc/rockchip,vop2.h>
|
||||
#include "rk3588.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc;
|
||||
mmc2 = &sdio;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
analog-sound {
|
||||
compatible = "audio-graph-card";
|
||||
label = "rk3588-es8316";
|
||||
|
||||
widgets = "Microphone", "Mic Jack",
|
||||
"Headphone", "Headphones";
|
||||
|
||||
routing = "MIC2", "Mic Jack",
|
||||
"Headphones", "HPOL",
|
||||
"Headphones", "HPOR";
|
||||
|
||||
dais = <&i2s0_8ch_p0>;
|
||||
hp-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hp_detect>;
|
||||
};
|
||||
|
||||
hdmi0-con {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi0_con_in: endpoint {
|
||||
remote-endpoint = <&hdmi0_out_con>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
hdmi1-con {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi1_con_in: endpoint {
|
||||
remote-endpoint = <&hdmi1_out_con>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&led_rgb_b>;
|
||||
|
||||
led_rgb_b {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
|
||||
fan: pwm-fan {
|
||||
compatible = "pwm-fan";
|
||||
cooling-levels = <0 120 150 180 210 240 255>;
|
||||
fan-supply = <&vcc5v0_sys>;
|
||||
pwms = <&pwm1 0 50000 0>;
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
|
||||
rfkill {
|
||||
compatible = "rfkill-gpio";
|
||||
label = "rfkill-m2-wlan";
|
||||
radio-type = "wlan";
|
||||
shutdown-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
rfkill-bt {
|
||||
compatible = "rfkill-gpio";
|
||||
label = "rfkill-m2-bt";
|
||||
radio-type = "bluetooth";
|
||||
shutdown-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie2x1l0: regulator-vcc3v3-pcie2x1l0 {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie2_0_vcc3v3_en>;
|
||||
regulator-name = "vcc3v3_pcie2x1l0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
startup-delay-us = <50000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie2x1l2: regulator-vcc3v3-pcie2x1l2 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_pcie2x1l2";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
startup-delay-us = <5000>;
|
||||
vin-supply = <&vcc_3v3_s3>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie30: regulator-vcc3v3-pcie30 {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie3_vcc3v3_en>;
|
||||
regulator-name = "vcc3v3_pcie30";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
startup-delay-us = <5000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_host: regulator-vcc5v0-host {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: regulator-vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_1v1_nldo_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&combphy0_ps {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy1_ps {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy2_psu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b1 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b2 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_b3 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi0_in {
|
||||
hdmi0_in_vp0: endpoint {
|
||||
remote-endpoint = <&vp0_out_hdmi0>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi0_out {
|
||||
hdmi0_out_con: endpoint {
|
||||
remote-endpoint = <&hdmi0_con_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi0_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi1 {
|
||||
pinctrl-0 = <&hdmim0_tx1_cec &hdmim0_tx1_hpd
|
||||
&hdmim1_tx1_scl &hdmim1_tx1_sda>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi1_in {
|
||||
hdmi1_in_vp1: endpoint {
|
||||
remote-endpoint = <&vp1_out_hdmi1>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi1_out {
|
||||
hdmi1_out_con: endpoint {
|
||||
remote-endpoint = <&hdmi1_con_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi1_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_receiver_cma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_receiver {
|
||||
hpd-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_hpd>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdptxphy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdptxphy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0m2_xfer>;
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu_big0_s0: regulator@42 {
|
||||
compatible = "rockchip,rk8602";
|
||||
reg = <0x42>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big0_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_big1_s0: regulator@43 {
|
||||
compatible = "rockchip,rk8603", "rockchip,rk8602";
|
||||
reg = <0x43>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big1_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
status = "okay";
|
||||
|
||||
hym8563: rtc@51 {
|
||||
compatible = "haoyu,hym8563";
|
||||
reg = <0x51>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "hym8563";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hym8563_int>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
status = "okay";
|
||||
|
||||
es8316: audio-codec@11 {
|
||||
compatible = "everest,es8316";
|
||||
reg = <0x11>;
|
||||
clocks = <&cru I2S0_8CH_MCLKOUT>;
|
||||
clock-names = "mclk";
|
||||
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
|
||||
assigned-clock-rates = <12288000>;
|
||||
#sound-dai-cells = <0>;
|
||||
|
||||
port {
|
||||
es8316_p0_0: endpoint {
|
||||
remote-endpoint = <&i2s0_8ch_p0_0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2s0_8ch {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s0_lrck
|
||||
&i2s0_mclk
|
||||
&i2s0_sclk
|
||||
&i2s0_sdi0
|
||||
&i2s0_sdo0>;
|
||||
status = "okay";
|
||||
|
||||
i2s0_8ch_p0: port {
|
||||
i2s0_8ch_p0_0: endpoint {
|
||||
dai-format = "i2s";
|
||||
mclk-fs = <256>;
|
||||
remote-endpoint = <&es8316_p0_0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2s5_8ch {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s6_8ch {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&package_thermal {
|
||||
polling-delay = <1000>;
|
||||
|
||||
trips {
|
||||
package_fan0: package-fan0 {
|
||||
temperature = <55000>;
|
||||
hysteresis = <2000>;
|
||||
type = "active";
|
||||
};
|
||||
|
||||
package_fan1: package-fan1 {
|
||||
temperature = <65000>;
|
||||
hysteresis = <2000>;
|
||||
type = "active";
|
||||
};
|
||||
};
|
||||
|
||||
cooling-maps {
|
||||
map0 {
|
||||
trip = <&package_fan0>;
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT 1>;
|
||||
};
|
||||
|
||||
map1 {
|
||||
trip = <&package_fan1>;
|
||||
cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie2x1l0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie2_0_rst>;
|
||||
reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie2x1l0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie2x1l2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie2_2_rst>;
|
||||
reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie2x1l2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie30phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie3x4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie3_rst>;
|
||||
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie30>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pd_gpu {
|
||||
domain-supply = <&vdd_gpu_s0>;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
hdmirx {
|
||||
hdmirx_hpd: hdmirx-5v-detection {
|
||||
rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
hym8563 {
|
||||
hym8563_int: hym8563-int {
|
||||
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
led_rgb_b: led-rgb-b {
|
||||
rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
hp_detect: hp-detect {
|
||||
rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie2 {
|
||||
pcie2_0_rst: pcie2-0-rst {
|
||||
rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie2_0_vcc3v3_en: pcie2-0-vcc-en {
|
||||
rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie2_2_rst: pcie2-2-rst {
|
||||
rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie3 {
|
||||
pcie3_rst: pcie3-rst {
|
||||
rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie3_vcc3v3_en: pcie3-vcc3v3-en {
|
||||
rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&avcc_1v8_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
non-removable;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
max-frequency = <200000000>;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
|
||||
disable-wp;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc_3v3_s3>;
|
||||
vqmmc-supply = <&vccio_sd_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sfc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&fspim2_pins>;
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <104000000>;
|
||||
spi-rx-bus-width = <4>;
|
||||
spi-tx-bus-width = <1>;
|
||||
vcc-supply = <&vcc_3v3_s3>;
|
||||
};
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
status = "okay";
|
||||
assigned-clocks = <&cru CLK_SPI2>;
|
||||
assigned-clock-rates = <200000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
|
||||
num-cs = <1>;
|
||||
|
||||
pmic@0 {
|
||||
compatible = "rockchip,rk806";
|
||||
spi-max-frequency = <1000000>;
|
||||
reg = <0x0>;
|
||||
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
|
||||
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
||||
|
||||
system-power-controller;
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc5-supply = <&vcc5v0_sys>;
|
||||
vcc6-supply = <&vcc5v0_sys>;
|
||||
vcc7-supply = <&vcc5v0_sys>;
|
||||
vcc8-supply = <&vcc5v0_sys>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
vcc10-supply = <&vcc5v0_sys>;
|
||||
vcc11-supply = <&vcc_2v0_pldo_s3>;
|
||||
vcc12-supply = <&vcc5v0_sys>;
|
||||
vcc13-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcc14-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcca-supply = <&vcc5v0_sys>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl1";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs2_null: dvs2-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs3_null: dvs3-null-pins {
|
||||
pins = "gpio_pwrctrl3";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
regulators {
|
||||
vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_gpu_s0";
|
||||
regulator-enable-ramp-delay = <400>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_cpu_lit_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_log_s0: dcdc-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_log_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_vdenc_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_s0: dcdc-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_ddr_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd2_ddr_s3: dcdc-reg6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vdd2_ddr_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_2v0_pldo_s3: dcdc-reg7 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <2000000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_2v0_pldo_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <2000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s3: dcdc-reg8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc_3v3_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vddq_ddr_s0: dcdc-reg9 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vddq_ddr_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s3: dcdc-reg10 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avcc_1v8_s0: pldo-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "avcc_1v8_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s0: pldo-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_1v2_s0: pldo-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-name = "avdd_1v2_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s0: pldo-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vcc_3v3_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd_s0: pldo-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vccio_sd_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
pldo6_s3: pldo-reg6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "pldo6_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s3: nldo-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "vdd_0v75_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_pll_s0: nldo-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-name = "vdd_ddr_pll_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_0v75_s0: nldo-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "avdd_0v75_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v85_s0: nldo-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-name = "vdd_0v85_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s0: nldo-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "vdd_0v75_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-0 = <&uart2m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2_host {
|
||||
/* connected to USB hub, which is powered by vcc5v0_sys */
|
||||
phy-supply = <&vcc5v0_sys>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy3_host {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdp_phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_xhci {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host2_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vp0 {
|
||||
vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
||||
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
||||
remote-endpoint = <&hdmi0_in_vp0>;
|
||||
};
|
||||
};
|
||||
|
||||
&vp1 {
|
||||
vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 {
|
||||
reg = <ROCKCHIP_VOP2_EP_HDMI1>;
|
||||
remote-endpoint = <&hdmi1_in_vp1>;
|
||||
};
|
||||
};
|
||||
@@ -414,6 +414,12 @@
|
||||
#define MCLK_I2S2_2CH_SAI_SRC_PRE 402
|
||||
#define MCLK_I2S3_8CH_SAI_SRC_PRE 403
|
||||
#define MCLK_SDPDIF_SRC_PRE 404
|
||||
#define SCLK_SDMMC_DRV 405
|
||||
#define SCLK_SDMMC_SAMPLE 406
|
||||
#define SCLK_SDIO0_DRV 407
|
||||
#define SCLK_SDIO0_SAMPLE 408
|
||||
#define SCLK_SDIO1_DRV 409
|
||||
#define SCLK_SDIO1_SAMPLE 410
|
||||
|
||||
/* scmi-clocks indices */
|
||||
#define SCMI_PCLK_KEYREADER 0
|
||||
|
||||
@@ -594,4 +594,14 @@
|
||||
#define SCMI_ARMCLK_B 11
|
||||
#define SCMI_CLK_GPU 456
|
||||
|
||||
/* IOC-controlled output clocks */
|
||||
#define CLK_SAI0_MCLKOUT_TO_IO 571
|
||||
#define CLK_SAI1_MCLKOUT_TO_IO 572
|
||||
#define CLK_SAI2_MCLKOUT_TO_IO 573
|
||||
#define CLK_SAI3_MCLKOUT_TO_IO 574
|
||||
#define CLK_SAI4_MCLKOUT_TO_IO 575
|
||||
#define CLK_SAI4_MCLKOUT_TO_IO 575
|
||||
#define CLK_FSPI0_TO_IO 576
|
||||
#define CLK_FSPI1_TO_IO 577
|
||||
|
||||
#endif
|
||||
|
||||
Reference in New Issue
Block a user