TWxSoftware/twx-linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

arm64: dts: allwinner: h616: Add Sipeed Longan SoM 3H and Pi 3H board support

Browse Source 
The Sipeed Longan SoM 3H is a system on module based on the Allwinner
H618 SoC. The SoM features:

- Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU
- 2/4 GiB LPDDR4 DRAM SoMs
- AXP313a PMIC
- eMMC

The Sipeed Longan PI 3H is a development board based on the above SoM.
The board features:
- Longan SoM 3H
- Raspberry-Pi-1 compatible GPIO header
- 2 USB 2.0 host port
- 1 USB 2.0 type C port (power supply + OTG)
- MicroSD slot
- 1Gbps Ethernet port (via RTL8211 PHY)
- HDMI port
- WiFi/BT chip

Add the devicetree file describing the currently supported features,
namely PMIC, LEDs, UART, SD card, eMMC, USB and Ethernet.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240211081739.395-3-jszhang@kernel.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
This commit is contained in:
Jisheng Zhang
2024-02-11 16:17:39 +08:00
committed by Jernej Skrabec
parent b9836187df
commit b9957d2d7d
3 changed files with 220 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files
arch/arm64/boot/dts/allwinner/Makefile
+1
View File
@@ -43,6 +43,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-cb1-manta.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-pi.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-longanpi-3h.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero2w.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero3.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-transpeed-8k618-t.dtb
arch/arm64/boot/dts/allwinner/sun50i-h618-longan-module-3h.dtsi
+75
View File
@@ -0,0 +1,75 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) Jisheng Zhang <jszhang@kernel.org>
*/
#include "sun50i-h616.dtsi"
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&reg_dldo1>;
vqmmc-supply = <&reg_aldo1>;
bus-width = <8>;
non-removable;
cap-mmc-hw-reset;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
status = "okay";
};
&r_i2c {
status = "okay";
axp313: pmic@36 {
compatible = "x-powers,axp313a";
reg = <0x36>;
#interrupt-cells = <1>;
interrupt-controller;
regulators {
reg_aldo1: aldo1 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc-1v8-pll";
};
reg_dldo1: dldo1 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-3v3-io";
};
reg_dcdc1: dcdc1 {
regulator-always-on;
regulator-min-microvolt = <810000>;
regulator-max-microvolt = <990000>;
regulator-name = "vdd-gpu-sys";
};
reg_dcdc2: dcdc2 {
regulator-always-on;
regulator-min-microvolt = <810000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-cpu";
};
reg_dcdc3: dcdc3 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-dram";
};
};
};
};
&pio {
vcc-pc-supply = <&reg_dldo1>;
vcc-pf-supply = <&reg_dldo1>;
vcc-pg-supply = <&reg_aldo1>;
vcc-ph-supply = <&reg_dldo1>;
vcc-pi-supply = <&reg_dldo1>;
};
arch/arm64/boot/dts/allwinner/sun50i-h618-longanpi-3h.dts
+144
View File
@@ -0,0 +1,144 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) Jisheng Zhang <jszhang@kernel.org>
*/
/dts-v1/;
#include "sun50i-h618-longan-module-3h.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/leds/common.h>
/ {
model = "Sipeed Longan Pi 3H";
compatible = "sipeed,longan-pi-3h", "sipeed,longan-module-3h", "allwinner,sun50i-h618";
aliases {
ethernet0 = &emac0;
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
leds {
compatible = "gpio-leds";
led-0 {
color = <LED_COLOR_ID_ORANGE>;
function = LED_FUNCTION_INDICATOR;
function-enumerator = <0>;
gpios = <&pio 6 2 GPIO_ACTIVE_LOW>; /* PG2 */
};
led-1 {
color = <LED_COLOR_ID_ORANGE>;
function = LED_FUNCTION_INDICATOR;
function-enumerator = <1>;
gpios = <&pio 6 4 GPIO_ACTIVE_LOW>; /* PG4 */
};
};
reg_vcc5v: regulator-vcc5v {
/* board wide 5V supply directly from the USB-C socket */
compatible = "regulator-fixed";
regulator-name = "vcc-5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
reg_vcc3v3: regulator-vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
vin-supply = <&reg_vcc5v>;
};
};
&axp313 {
vin1-supply = <&reg_vcc5v>;
vin2-supply = <&reg_vcc5v>;
vin3-supply = <&reg_vcc5v>;
};
&ehci1 {
status = "okay";
};
&ohci1 {
status = "okay";
};
&ehci2 {
status = "okay";
};
&ohci2 {
status = "okay";
};
/* WiFi & BT combo module is connected to this Host */
&ehci3 {
status = "okay";
};
&ohci3 {
status = "okay";
};
&emac0 {
pinctrl-names = "default";
pinctrl-0 = <&ext_rgmii_pins>;
phy-mode = "rgmii";
phy-handle = <&ext_rgmii_phy>;
allwinner,rx-delay-ps = <3100>;
allwinner,tx-delay-ps = <700>;
phy-supply = <&reg_vcc3v3>;
status = "okay";
};
&mdio0 {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
};
};
&mmc0 {
bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
vmmc-supply = <&reg_vcc3v3>;
status = "okay";
};
&uart0 {
status = "okay";
};
&usbotg {
/*
* PHY0 pins are connected to a USB-C socket, but a role switch
* is not implemented: both CC pins are pulled to GND.
* The VBUS pins power the device, so a fixed peripheral mode
* is the best choice.
* The board can be powered via GPIOs, in this case port0 *can*
* act as a host (with a cable/adapter ignoring CC), as VBUS is
* then provided by the GPIOs. Any user of this setup would
* need to adjust the DT accordingly: dr_mode set to "host",
* enabling OHCI0 and EHCI0.
*/
dr_mode = "peripheral";
status = "okay";
};
&usbphy {
usb1_vbus-supply = <&reg_vcc5v>;
usb2_vbus-supply = <&reg_vcc5v>;
status = "okay";
};