TWxSoftware/twx-linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

dt-bindings: clock: Drop st,stm32h7-rcc.txt

Browse Source 
The binding is already covered by st,stm32-rcc.yaml.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250505161933.1432791-1-robh@kernel.org
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This commit is contained in:
Rob Herring (Arm)
2025-05-05 11:19:32 -05:00
committed by Stephen Boyd
parent 619ddc6935
commit 72b421e645
1 changed files with 0 additions and 71 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt
-71
View File
@@ -1,71 +0,0 @@
STMicroelectronics STM32H7 Reset and Clock Controller
=====================================================
The RCC IP is both a reset and a clock controller.
Please refer to clock-bindings.txt for common clock controller binding usage.
Please also refer to reset.txt for common reset controller binding usage.
Required properties:
- compatible: Should be:
"st,stm32h743-rcc"
- reg: should be register base and length as documented in the
datasheet
- #reset-cells: 1, see below
- #clock-cells : from common clock binding; shall be set to 1
- clocks: External oscillator clock phandle
- high speed external clock signal (HSE)
- low speed external clock signal (LSE)
- external I2S clock (I2S_CKIN)
Optional properties:
- st,syscfg: phandle for pwrcfg, mandatory to disable/enable backup domain
write protection (RTC clock).
Example:
rcc: reset-clock-controller@58024400 {
compatible = "st,stm32h743-rcc", "st,stm32-rcc";
reg = <0x58024400 0x400>;
#reset-cells = <1>;
#clock-cells = <1>;
clocks = <&clk_hse>, <&clk_lse>, <&clk_i2s_ckin>;
st,syscfg = <&pwrcfg>;
};
The peripheral clock consumer should specify the desired clock by
having the clock ID in its "clocks" phandle cell.
Example:
timer5: timer@40000c00 {
compatible = "st,stm32-timer";
reg = <0x40000c00 0x400>;
interrupts = <50>;
clocks = <&rcc TIM5_CK>;
};
Specifying softreset control of devices
=======================================
Device nodes should specify the reset channel required in their "resets"
property, containing a phandle to the reset device node and an index specifying
which channel to use.
The index is the bit number within the RCC registers bank, starting from RCC
base address.
It is calculated as: index = register_offset / 4 * 32 + bit_offset.
Where bit_offset is the bit offset within the register.
For example, for CRC reset:
crc = AHB4RSTR_offset / 4 * 32 + CRCRST_bit_offset = 0x88 / 4 * 32 + 19 = 1107
Example:
timer2 {
resets = <&rcc STM32H7_APB1L_RESET(TIM2)>;
};