arm64: dts: imx8mm-iot-gateway: Add initial support
Add the initial support for the CompuLab i.MX8MM IoT Gateway board, which is based on the Compulab's UCM-iMX8M-Mini SoM. Board URL: https://www.compulab.com/products/iot-gateways/iot-gate-imx8-industrial-arm-iot-gateway/ SoM URL: https://www.compulab.com/products/computer-on-modules/ucm-imx8m-mini-nxp-i-mx-8m-mini-som-system-on-module-computer/ Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Fabio Estevam
@@ -114,6 +114,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
|
||||
dtb-$(CONFIG_ARCH_MXC) += imx8mm-evkb.dtb
|
||||
dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb
|
||||
dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb
|
||||
dtb-$(CONFIG_ARCH_MXC) += imx8mm-iot-gateway.dtb
|
||||
dtb-$(CONFIG_ARCH_MXC) += imx8mm-innocomm-wb15-evk.dtb
|
||||
dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-bl.dtb
|
||||
dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-bl-osm-s.dtb
|
||||
|
||||
@@ -0,0 +1,218 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
//
|
||||
// Copyright 2020 CompuLab
|
||||
|
||||
#include "imx8mm-ucm-som.dtsi"
|
||||
#include <dt-bindings/phy/phy-imx8-pcie.h>
|
||||
/ {
|
||||
model = "CompuLab i.MX8MM IoT Gateway";
|
||||
compatible = "compulab,imx8mm-iot-gateway", "compulab,imx8mm-ucm-som", "fsl,imx8mm";
|
||||
|
||||
regulator-usbhub-ena {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usbhub_ena";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
regulator-usbhub-rst {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usbhub_rst";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio3 24 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
regulator-uart1-mode {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "uart1_mode";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
regulator-uart1-duplex {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "uart1_duplex";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
regulator-uart1-shdn {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "uart1_shdn";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio5 5 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
regulator-uart1-trmen {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "uart1_trmen";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio4 25 GPIO_ACTIVE_LOW>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
regulator-usdhc2-v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usdhc2_v";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
regulator-mpcie2-rst {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "mpcie2_rst";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
regulator-mpcie2lora-dis {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "mpcie2lora_dis";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio3 21 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
pcie0_refclk: clock-pcie0-refclk {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <100000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
clock-frequency = <100000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c1>;
|
||||
status = "okay";
|
||||
|
||||
eeprom@54 {
|
||||
compatible = "atmel,24c08";
|
||||
reg = <0x54>;
|
||||
pagesize = <16>;
|
||||
};
|
||||
};
|
||||
|
||||
&ecspi1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
|
||||
cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie_phy {
|
||||
fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
|
||||
fsl,tx-deemph-gen1 = <0x2d>;
|
||||
fsl,tx-deemph-gen2 = <0xf>;
|
||||
fsl,clkreq-unsupported;
|
||||
clocks = <&pcie0_refclk>;
|
||||
clock-names = "ref";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pcie0>;
|
||||
reset-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbotg1 {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbotg2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
dr_mode = "host";
|
||||
usb-role-switch;
|
||||
status = "okay";
|
||||
|
||||
usbhub@1 {
|
||||
compatible = "usb424,9514";
|
||||
reg = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usb9514>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
ethernet: ethernet@1 {
|
||||
compatible = "usb424,ec00";
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usdhc2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc2>;
|
||||
bus-width = <4>;
|
||||
mmc-ddr-1_8v;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&iomuxc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_hog>;
|
||||
|
||||
pinctrl_hog: hoggrp {
|
||||
fsl,pins = <
|
||||
/* mPCIe2 */
|
||||
MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x140
|
||||
MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x140
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_ecspi1: ecspi1grp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82
|
||||
MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82
|
||||
MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_ecspi1_cs: ecspi1csgrp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x40000
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pcie0: pcie0grp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x140
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usb9514: usb9514grp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x140 /* USB_PS_EN */
|
||||
MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x140 /* HUB_RSTn */
|
||||
>;
|
||||
};
|
||||
};
|
||||
@@ -0,0 +1,679 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
//
|
||||
// Copyright 2018 CompuLab
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "imx8mm.dtsi"
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
rtc0 = &rtc_i2c;
|
||||
rtc1 = &snvs_rtc;
|
||||
mmc0 = &usdhc3;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart3;
|
||||
};
|
||||
|
||||
backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm2 0 3000000 0>;
|
||||
brightness-levels = <0 255>;
|
||||
num-interpolated-steps = <255>;
|
||||
default-brightness-level = <222>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_gpio_led>;
|
||||
|
||||
heartbeat-led {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
|
||||
pmic_osc: clock-pmic {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
clock-output-names = "pmic_osc";
|
||||
};
|
||||
|
||||
wlreg_on: regulator-wlreg-on {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "wlreg_on";
|
||||
gpio = <&gpio2 10 GPIO_ACTIVE_HIGH>;
|
||||
startup-delay-us = <100>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VSD_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
startup-delay-us = <100>;
|
||||
off-on-delay-us = <12000>;
|
||||
};
|
||||
|
||||
regulator-usdhc3rst {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usdhc3_rst";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
|
||||
regulator-always-on;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
regulator-fec1rst {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fec1_rst";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
|
||||
regulator-always-on;
|
||||
enable-active-high;
|
||||
startup-delay-us = <500>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
|
||||
&A53_0 {
|
||||
arm-supply = <&buck2>;
|
||||
};
|
||||
|
||||
&cpu_alert0 {
|
||||
temperature = <105000>;
|
||||
};
|
||||
|
||||
&cpu_crit0 {
|
||||
temperature = <115000>;
|
||||
};
|
||||
|
||||
&fec1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_fec1>;
|
||||
phy-mode = "rgmii-id";
|
||||
phy-handle = <ðphy0>;
|
||||
fsl,magic-packet;
|
||||
status = "okay";
|
||||
|
||||
mdio {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
ethphy0: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
clock-frequency = <400000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c2>;
|
||||
status = "okay";
|
||||
|
||||
pmic@4b {
|
||||
reg = <0x4b>;
|
||||
compatible = "rohm,bd71837";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pmic>;
|
||||
#clock-cells = <0>;
|
||||
clocks = <&pmic_osc>;
|
||||
clock-names = "osc";
|
||||
clock-output-names = "pmic_clk";
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
|
||||
rohm,reset-snvs-powered;
|
||||
|
||||
regulators {
|
||||
buck1: BUCK1 {
|
||||
regulator-name = "buck1";
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-ramp-delay = <1250>;
|
||||
};
|
||||
|
||||
buck2: BUCK2 {
|
||||
regulator-name = "buck2";
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-ramp-delay = <1250>;
|
||||
rohm,dvs-run-voltage = <1000000>;
|
||||
rohm,dvs-idle-voltage = <900000>;
|
||||
};
|
||||
|
||||
buck3: BUCK3 {
|
||||
regulator-name = "buck3";
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
buck4: BUCK4 {
|
||||
regulator-name = "buck4";
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
buck5: BUCK5 {
|
||||
regulator-name = "buck5";
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
buck6: BUCK6 {
|
||||
regulator-name = "buck6";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
buck7: BUCK7 {
|
||||
regulator-name = "buck7";
|
||||
regulator-min-microvolt = <1605000>;
|
||||
regulator-max-microvolt = <1995000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
buck8: BUCK8 {
|
||||
regulator-name = "buck8";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo1: LDO1 {
|
||||
regulator-name = "ldo1";
|
||||
regulator-min-microvolt = <1600000>;
|
||||
regulator-max-microvolt = <1900000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo2: LDO2 {
|
||||
regulator-name = "ldo2";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo3: LDO3 {
|
||||
regulator-name = "ldo3";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo4: LDO4 {
|
||||
regulator-name = "ldo4";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo5: LDO5 {
|
||||
regulator-name = "ldo5";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
ldo6: LDO6 {
|
||||
regulator-name = "ldo6";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo7: LDO7 {
|
||||
regulator-name = "ldo7";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "atmel,24c08";
|
||||
reg = <0x50>;
|
||||
pagesize = <16>;
|
||||
};
|
||||
|
||||
rtc_i2c: rtc@69 {
|
||||
compatible = "abracon,ab1805";
|
||||
reg = <0x69>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
clock-frequency = <100000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c3>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm_backlight>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sai2 {
|
||||
#sound-dai-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_sai2>;
|
||||
assigned-clocks = <&clk IMX8MM_CLK_SAI2>;
|
||||
assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
|
||||
assigned-clock-rates = <49152000>;
|
||||
clocks = <&clk IMX8MM_CLK_SAI2_IPG>, <&clk IMX8MM_CLK_DUMMY>,
|
||||
<&clk IMX8MM_CLK_SAI2_ROOT>, <&clk IMX8MM_CLK_DUMMY>,
|
||||
<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_AUDIO_PLL1_OUT>,
|
||||
<&clk IMX8MM_AUDIO_PLL2_OUT>;
|
||||
clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
|
||||
fsl,sai-asynchronous;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&snvs {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&snvs_pwrkey {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart1>;
|
||||
assigned-clocks = <&clk IMX8MM_CLK_UART1>;
|
||||
assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart2>;
|
||||
assigned-clocks = <&clk IMX8MM_CLK_UART2>;
|
||||
assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&uart3 { /* console */
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart4 { /* bluetooth */
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart4>;
|
||||
assigned-clocks = <&clk IMX8MM_CLK_UART4>;
|
||||
assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
|
||||
uart-has-rtscts;
|
||||
status = "disabled";
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm4330-bt";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_bt>;
|
||||
max-speed = <3000000>;
|
||||
device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
|
||||
host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
|
||||
shutdown-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&usbotg1 {
|
||||
dr_mode = "otg";
|
||||
hnp-disable;
|
||||
srp-disable;
|
||||
disable-over-current;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&usbotg2 {
|
||||
dr_mode = "host";
|
||||
hnp-disable;
|
||||
srp-disable;
|
||||
disable-over-current;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&usdhc1 {
|
||||
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
||||
pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
|
||||
pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
|
||||
pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
|
||||
bus-width = <4>;
|
||||
non-removable;
|
||||
};
|
||||
|
||||
&usdhc2 {
|
||||
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
||||
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
|
||||
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
|
||||
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
|
||||
cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
|
||||
wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
|
||||
no-1-8-v;
|
||||
bus-width = <4>;
|
||||
vmmc-supply = <®_usdhc2_vmmc>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usdhc3 {
|
||||
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
||||
pinctrl-0 = <&pinctrl_usdhc3>;
|
||||
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
|
||||
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
|
||||
bus-width = <8>;
|
||||
non-removable;
|
||||
no-1-8-v;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wdog1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_wdog>;
|
||||
fsl,ext-reset-output;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&iomuxc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_hog_1>;
|
||||
|
||||
pinctrl_hog: hoggrp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19
|
||||
MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x190
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_bt: bt0grp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6 0x19 /* BT_REG_ON */
|
||||
MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7 0x19 /* BT_DEV_WU */
|
||||
MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x19 /* BT_HST_WU */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_fec1: fec1grp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3
|
||||
MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
|
||||
MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
|
||||
MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
|
||||
MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
|
||||
MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
|
||||
MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
|
||||
MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
|
||||
MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
|
||||
MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
|
||||
MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
|
||||
MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
|
||||
MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
|
||||
MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_gpio_led: gpioledgrp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x19
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c1: i2c1grp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
|
||||
MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c2: i2c2grp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
|
||||
MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c3: i2c3grp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
|
||||
MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c4: i2c4grp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3
|
||||
MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pmic: pmicgrp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pwm_backlight: pwmbacklightgrp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_GPIO1_IO13_PWM2_OUT 0x03
|
||||
>;
|
||||
};
|
||||
|
||||
|
||||
pinctrl_sai2: sai2grp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6
|
||||
MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6
|
||||
MX8MM_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC 0xd6
|
||||
MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6
|
||||
MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6
|
||||
MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart1: uart1grp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
|
||||
MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart2: uart2grp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
|
||||
MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart3: uart3grp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x49
|
||||
MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x49
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart4: uart4grp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B 0x140
|
||||
MX8MM_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX 0x140
|
||||
MX8MM_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B 0x140
|
||||
MX8MM_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX 0x140
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc1_gpio: usdhc1grpgpiogrp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x41
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc1: usdhc1grp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190
|
||||
MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0
|
||||
MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0
|
||||
MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0
|
||||
MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0
|
||||
MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0
|
||||
MX8MM_IOMUXC_GPIO1_IO03_USDHC1_VSELECT 0x1d0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc1_100mhz: usdhc1grp100mhzgrp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194
|
||||
MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4
|
||||
MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4
|
||||
MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4
|
||||
MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4
|
||||
MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4
|
||||
MX8MM_IOMUXC_GPIO1_IO03_USDHC1_VSELECT 0x1d0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc1_200mhz: usdhc1grp200mhzgrp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196
|
||||
MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6
|
||||
MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6
|
||||
MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6
|
||||
MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6
|
||||
MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6
|
||||
MX8MM_IOMUXC_GPIO1_IO03_USDHC1_VSELECT 0x1d0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
|
||||
MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41
|
||||
MX8MM_IOMUXC_SD2_WP_GPIO2_IO20 0x00
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc2: usdhc2grp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
|
||||
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
|
||||
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
|
||||
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
|
||||
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
|
||||
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
|
||||
MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc2_100mhz: usdhc2grp100mhzgrp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
|
||||
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
|
||||
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
|
||||
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
|
||||
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
|
||||
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
|
||||
MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc2_200mhz: usdhc2grp200mhzgrp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
|
||||
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
|
||||
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
|
||||
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
|
||||
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
|
||||
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
|
||||
MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc3: usdhc3grp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000190
|
||||
MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
|
||||
MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
|
||||
MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
|
||||
MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
|
||||
MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
|
||||
MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
|
||||
MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
|
||||
MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
|
||||
MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
|
||||
MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc3_100mhz: usdhc3grp100mhzgrp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000194
|
||||
MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
|
||||
MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
|
||||
MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
|
||||
MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
|
||||
MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
|
||||
MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
|
||||
MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
|
||||
MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
|
||||
MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
|
||||
MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc3_200mhz: usdhc3grp200mhzgrp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000196
|
||||
MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
|
||||
MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
|
||||
MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
|
||||
MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
|
||||
MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
|
||||
MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
|
||||
MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
|
||||
MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
|
||||
MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
|
||||
MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_wdog: wdoggrp {
|
||||
fsl,pins = <
|
||||
MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
|
||||
>;
|
||||
};
|
||||
};
|
||||
Reference in New Issue
Block a user