TWx Linux Repository
8b60e2189f
Niklas Cassel <nks@flawful.org> says: This series adds support for Command Duration Limits. The series is based on linux tag: v6.4-rc1 The series can also be found in git: https://github.com/floatious/linux/commits/cdl-v7 ================= CDL in ATA / SCSI ================= Command Duration Limits is defined in: T13 ATA Command Set - 5 (ACS-5) and T10 SCSI Primary Commands - 6 (SPC-6) respectively (a simpler version of CDL is defined in T10 SPC-5). CDL defines Duration Limits Descriptors (DLD). 7 DLDs for read commands and 7 DLDs for write commands. Simply put, a DLD contains a limit and a policy. A command can specify that a certain limit should be applied by setting the DLD index field (3 bits, so 0-7) in the command itself. The DLD index points to one of the 7 DLDs. DLD index 0 means no descriptor, so no limit. DLD index 1-7 means DLD 1-7. A DLD can have a few different policies, but the two major ones are: -Policy 0xF (abort), command will be completed with command aborted error (ATA) or status CHECK CONDITION (SCSI), with sense data indicating that the command timed out. -Policy 0xD (complete-unavailable), command will be completed without error (ATA) or status GOOD (SCSI), with sense data indicating that the command timed out. Note that the command will not have transferred any data to/from the device when the command timed out, even though the command returned success. Regardless of the CDL policy, in case of a CDL timeout, the I/O will result in a -ETIME error to user-space. The DLDs are defined in the CDL log page(s) and are readable and writable. Reading and writing the CDL DLDs are outside the scope of the kernel. If a user wants to read or write the descriptors, they can do so using a user-space application that sends passthrough commands, such as cdl-tools: https://github.com/westerndigitalcorporation/cdl-tools ================================ The introduction of ioprio hints ================================ What the kernel does provide, is a method to let I/O use one of the CDL DLDs defined in the device. Note that the kernel will simply forward the DLD index to the device, so the kernel currently does not know, nor does it need to know, how the DLDs are defined inside the device. The way that the CDL DLD index is supplied to the kernel is by introducing a new 10 bit "ioprio hint" field within the existing 16 bit ioprio definition. Currently, only 6 out of the 16 ioprio bits are in use, the remaining 10 bits are unused, and are currently explicitly disallowed to be set by the kernel. For now, we only add ioprio hints representing CDL DLD index 1-7. Additional ioprio hints for other QoS features could be defined in the future. A theoretical future work could be to make an I/O scheduler aware of these hints. E.g. for CDL, an I/O scheduler could make use of the duration limit in each descriptor, and take that information into account while scheduling commands. Right now, the ioprio hints will be ignored by the I/O schedulers. ============================== How to use CDL from user-space ============================== Since CDL is mutually exclusive with NCQ priority (see ncq_prio_enable and sas_ncq_prio_enable in Documentation/ABI/testing/sysfs-block-device), CDL has to be explicitly enabled using: echo 1 > /sys/block/$bdev/device/cdl_enable Since the ioprio hints are supplied through the existing I/O priority API, it should be simple for an application to make use of the ioprio hints. It simply has to reuse one of the new macros defined in include/uapi/linux/ioprio.h: IOPRIO_PRIO_HINT() or IOPRIO_PRIO_VALUE_HINT(), and supply one of the new hints defined in include/uapi/linux/ioprio.h: IOPRIO_HINT_DEV_DURATION_LIMIT_[1-7], which indicates that the I/O should use the corresponding CDL DLD index 1-7. By reusing the I/O priority API, the user can both define a DLD to use per AIO (io_uring sqe->ioprio or libaio iocb->aio_reqprio) or per-thread (ioprio_set()). ======= Testing ======= With the following fio patches: https://github.com/floatious/fio/commits/cdl fio adds support for ioprio hints, such that CDL can be tested using e.g.: fio --ioengine=io_uring --cmdprio_percentage=10 --cmdprio_hint=DLD_index A simple way to test is to use a DLD with a very short duration limit, and send large reads. Regardless of the CDL policy, in case of a CDL timeout, the I/O will result in a -ETIME error to user-space. We also provide a CDL test suite located in the cdl-tools repo, see: https://github.com/westerndigitalcorporation/cdl-tools#testing-a-system-command-duration-limits-support We have tested this patch series using: -real hardware -the following QEMU implementation: https://github.com/floatious/qemu/tree/cdl (NOTE: the QEMU implementation requires you to define the CDL policy at compile time, so you currently need to recompile QEMU when switching between policies.) =================== Further information =================== For further information about CDL, see Damien's slides: Presented at SDC 2021: https://www.snia.org/sites/default/files/SDC/2021/pdfs/SNIA-SDC21-LeMoal-Be-On-Time-command-duration-limits-Feature-Support-in%20Linux.pdf Presented at Lund Linux Con 2022: https://drive.google.com/file/d/1I6ChFc0h4JY9qZdO1bY5oCAdYCSZVqWw/view?usp=sharing ================ Changes since V6 ================ -Rebased series on v6.4-rc1. -Picked up Reviewed-by tags from Hannes (Thank you Hannes!) -Picked up Reviewed-by tag from Christoph (Thank you Christoph!) -Changed KernelVersion from 6.4 to 6.5 for new sysfs attributes. For older change logs, see previous patch series versions: https://lore.kernel.org/linux-scsi/20230406113252.41211-1-nks@flawful.org/ https://lore.kernel.org/linux-scsi/20230404182428.715140-1-nks@flawful.org/ https://lore.kernel.org/linux-scsi/20230309215516.3800571-1-niklas.cassel@wdc.com/ https://lore.kernel.org/linux-scsi/20230124190308.127318-1-niklas.cassel@wdc.com/ https://lore.kernel.org/linux-scsi/20230112140412.667308-1-niklas.cassel@wdc.com/ https://lore.kernel.org/linux-scsi/20221208105947.2399894-1-niklas.cassel@wdc.com/ Link: https://lore.kernel.org/r/20230511011356.227789-1-nks@flawful.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
||
|---|---|---|
| arch | ||
| block | ||
| certs | ||
| crypto | ||
| Documentation | ||
| drivers | ||
| fs | ||
| include | ||
| init | ||
| io_uring | ||
| ipc | ||
| kernel | ||
| lib | ||
| LICENSES | ||
| mm | ||
| net | ||
| rust | ||
| samples | ||
| scripts | ||
| security | ||
| sound | ||
| tools | ||
| usr | ||
| virt | ||
| .clang-format | ||
| .cocciconfig | ||
| .get_maintainer.ignore | ||
| .gitattributes | ||
| .gitignore | ||
| .mailmap | ||
| .rustfmt.toml | ||
| COPYING | ||
| CREDITS | ||
| Kbuild | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
Linux kernel
============
There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.
In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``. The formatted documentation can also be read online at:
https://www.kernel.org/doc/html/latest/
There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.
Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.