Doug Anderson 5c935165da mmc: dw_mmc: Add a timeout for sending CMD11 ... In the Designware databook's description of the "Voltage Switch Normal Scenario" it instructs us to set a timer and fail the voltage change if we don't see the voltage change interrupt within 2ms. Let's implement that. Without implementing this I have often been able to reproduce a hang while trying to send CMD11 on an rk3288-based board while constantly ejecting and inserting UHS cards. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>		2015-03-31 16:50:43 +02:00
..
boot.h
card.h	mmc: Resolve BKOPS compatability issue	2015-01-29 11:15:12 +01:00
core.h	mmc: core: always check status after reset	2015-01-19 09:56:27 +01:00
dw_mmc.h	mmc: dw_mmc: Add a timeout for sending CMD11	2015-03-31 16:50:43 +02:00
host.h	mmc: core: Remove the ->enable|disable() callbacks	2015-03-27 10:57:55 +01:00
mmc.h	mmc: Resolve BKOPS compatability issue	2015-01-29 11:15:12 +01:00
pm.h
sd.h
sdhci-pci-data.h
sdio_func.h	mmc: core: Don't export the to_sdio_driver macro	2014-11-10 12:40:32 +01:00
sdio_ids.h	brcmfmac: Add support for bcm43340/1 wireless chipsets	2015-01-06 21:06:42 +02:00
sdio.h
sh_mmcif.h	mmc: sh_mmcif: revision-specific CLK_CTRL2 handling	2013-08-25 00:10:18 -04:00
sh_mobile_sdhi.h	mmc: sh_mobile_sdhi: remove .init/.cleanup	2015-01-20 10:23:36 +01:00
slot-gpio.h	mmc: slot-gpio: Allow host driver to provide isr for card-detect interrupts	2015-01-19 09:56:29 +01:00
tmio.h	mmc: SDHI: add SoC specific workaround via HW version	2014-01-13 12:48:24 -05:00