Roger Quadros
e569152274
The NAND expansion card (PROC143E1) connects over the User/MCU/PRU Expansion port on the am62-lp-sk EVM. The following pins are shared between McASP1 and GPMC-NAND so both cannot work simultaneously. Pin name McASP1 function GPMC function ======== =============== ============= J17 MCASP1_AXR0 GPMC0_WEN P21 MCASP1_AFSX GPMC0_WAIT0 K17 MCASP1_ACLKX GPMC0_BE0N_CLE K20 MCASP1_AXR2 GPMC0_ADVN_ALE The factory default sets the pins for McASP1 use. (i.e. Resistor Array RA1 installed, RA4 not installed). For NAND use, RA1 has to be removed and RA4 must be installed. Signed-off-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20240622-am62lp-sk-nand-v1-2-caee496eaf42@kernel.org Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
235 lines
5.4 KiB
Devicetree
235 lines
5.4 KiB
Devicetree
// SPDX-License-Identifier: GPL-2.0-only OR MIT
|
|
/*
|
|
* AM62x LP SK: https://www.ti.com/tool/SK-AM62-LP
|
|
*
|
|
* Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "k3-am62x-sk-common.dtsi"
|
|
|
|
/ {
|
|
compatible = "ti,am62-lp-sk", "ti,am625";
|
|
model = "Texas Instruments AM62x LP SK";
|
|
|
|
vmain_pd: regulator-0 {
|
|
/* TPS65988 PD CONTROLLER OUTPUT */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vmain_pd";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vcc_5v0: regulator-1 {
|
|
/* Output of TPS630702RNMR */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_5v0";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vmain_pd>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vcc_3v3_sys: regulator-2 {
|
|
/* output of LM61460-Q1 */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_3v3_sys";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vmain_pd>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vdd_mmc1: regulator-3 {
|
|
/* TPS22918DBVR */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vdd_mmc1";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
enable-active-high;
|
|
vin-supply = <&vcc_3v3_sys>;
|
|
gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
vddshv_sdio: regulator-4 {
|
|
compatible = "regulator-gpio";
|
|
regulator-name = "vddshv_sdio";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vddshv_sdio_pins_default>;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
vin-supply = <&ldo1_reg>;
|
|
gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
|
|
states = <1800000 0x0>,
|
|
<3300000 0x1>;
|
|
};
|
|
};
|
|
|
|
&main_pmx0 {
|
|
vddshv_sdio_pins_default: vddshv-sdio-default-pins {
|
|
pinctrl-single,pins = <
|
|
AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO0_31 */
|
|
>;
|
|
};
|
|
|
|
main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
|
|
pinctrl-single,pins = <
|
|
AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (C13) UART0_RTSn.GPIO1_23 */
|
|
>;
|
|
};
|
|
|
|
pmic_irq_pins_default: pmic-irq-default-pins {
|
|
pinctrl-single,pins = <
|
|
AM62X_IOPAD(0x01f4, PIN_INPUT, 0) /* (B16) EXTINTn */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&main_i2c1 {
|
|
exp1: gpio@22 {
|
|
compatible = "ti,tca6424";
|
|
reg = <0x22>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
|
|
"PRU_DETECT", "MMC1_SD_EN",
|
|
"VPP_LDO_EN", "EXP_PS_3V3_En",
|
|
"EXP_PS_5V0_En", "EXP_HAT_DETECT",
|
|
"GPIO_AUD_RSTn", "GPIO_eMMC_RSTn",
|
|
"UART1_FET_BUF_EN", "BT_UART_WAKE_SOC",
|
|
"GPIO_HDMI_RSTn", "CSI_GPIO0",
|
|
"CSI_GPIO1", "GPIO_OLDI_INT",
|
|
"HDMI_INTn", "TEST_GPIO2",
|
|
"MCASP1_FET_EN", "MCASP1_BUF_BT_EN",
|
|
"MCASP1_FET_SEL", "UART1_FET_SEL",
|
|
"", "IO_EXP_TEST_LED";
|
|
|
|
interrupt-parent = <&main_gpio1>;
|
|
interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
|
|
};
|
|
|
|
exp2: gpio@23 {
|
|
compatible = "ti,tca6424";
|
|
reg = <0x23>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-line-names = "", "",
|
|
"", "",
|
|
"", "",
|
|
"", "",
|
|
"WL_LT_EN", "CSI_RSTz",
|
|
"", "",
|
|
"", "",
|
|
"", "",
|
|
"SPI0_FET_SEL", "SPI0_FET_OE",
|
|
"GPIO_OLDI_RSTn", "PRU_3V3_EN",
|
|
"", "",
|
|
"CSI_VLDO_SEL", "SOC_WLAN_SDIO_RST";
|
|
};
|
|
};
|
|
|
|
&sdhci1 {
|
|
vmmc-supply = <&vdd_mmc1>;
|
|
vqmmc-supply = <&vddshv_sdio>;
|
|
};
|
|
|
|
&cpsw_port2 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&main_i2c0 {
|
|
tps65219: pmic@30 {
|
|
compatible = "ti,tps65219";
|
|
reg = <0x30>;
|
|
buck1-supply = <&vcc_3v3_sys>;
|
|
buck2-supply = <&vcc_3v3_sys>;
|
|
buck3-supply = <&vcc_3v3_sys>;
|
|
ldo1-supply = <&vcc_3v3_sys>;
|
|
ldo2-supply = <&buck2_reg>;
|
|
ldo3-supply = <&vcc_3v3_sys>;
|
|
ldo4-supply = <&vcc_3v3_sys>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pmic_irq_pins_default>;
|
|
|
|
interrupt-parent = <&gic500>;
|
|
interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
regulators {
|
|
buck1_reg: buck1 {
|
|
regulator-name = "VDD_CORE";
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <750000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
buck2_reg: buck2 {
|
|
regulator-name = "VCC1V8_SYS";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
buck3_reg: buck3 {
|
|
regulator-name = "VDD_LPDDR4";
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo1_reg: ldo1 {
|
|
regulator-name = "VDDSHV_SDIO";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
ldo2_reg: ldo2 {
|
|
regulator-name = "VDDAR_CORE";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <850000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo3_reg: ldo3 {
|
|
regulator-name = "VDDA_1V8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo4_reg: ldo4 {
|
|
regulator-name = "VDD_1V2";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&tlv320aic3106 {
|
|
DVDD-supply = <&buck2_reg>;
|
|
};
|
|
|
|
&gpmc0 {
|
|
ranges = <0 0 0x00 0x51000000 0x01000000>; /* CS0 space. Min partition = 16MB */
|
|
};
|