commit 8802766324 upstream.
IORING_REGISTER_PBUF_RING can reuse an old struct io_buffer_list if it
was created for legacy selected buffer and has been emptied. It violates
the requirement that most of the field should stay stable after publish.
Always reallocate it instead.
Cc: stable@vger.kernel.org
Reported-by: Pumpkin Chang <pumpkin@devco.re>
Fixes: 2fcabce2d7 ("io_uring: disallow mixed provided buffer group registrations")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we get -EIOCBQUEUED, we need to ensure that the buffer is consumed
from the provided buffer ring, which can be done with io_kbuf_recycle()
+ REQ_F_PARTIAL_IO.
Reported-by: Muhammad Ramdhan <ramdhan@starlabs.sg>
Reported-by: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Reported-by: Jacob Soo <jacob.soo@starlabs.sg>
Fixes: c7fb19428d ("io_uring: add support for ring mapped supplied buffers")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
io_req_prep_async() can import provided buffers, commit the ring state
by giving up on that before, it'll be reimported later if needed.
Reported-by: Muhammad Ramdhan <ramdhan@starlabs.sg>
Reported-by: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Reported-by: Jacob Soo <jacob.soo@starlabs.sg>
Fixes: c7fb19428d ("io_uring: add support for ring mapped supplied buffers")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8c8492ca64 upstream.
If a socket is shutdown before the connection completes, POLLERR is set
in the poll mask. However, connect ignores this as it doesn't know, and
attempts the connection again. This may lead to a bogus -ETIMEDOUT
result, where it should have noticed the POLLERR and just returned
-ECONNRESET instead.
Have the poll logic check for whether or not POLLERR is set in the mask,
and if so, mark the request as failed. Then connect can appropriately
fail the request rather than retry it.
Reported-by: Sergey Galas <ssgalas@cloud.ru>
Cc: stable@vger.kernel.org
Link: https://github.com/axboe/liburing/discussions/1335
Fixes: 3fb1bd6881 ("io_uring/net: handle -EINPROGRESS correct for IORING_OP_CONNECT")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d58d82bd0e ]
io_uring_cmd_sock() does a normal read of cmd->sqe->cmd_op, where it
really should be using a READ_ONCE() as ->sqe may still be pointing to
the original SQE. Since the prep side already does this READ_ONCE() and
stores it locally, use that value rather than re-read it.
Fixes: 8e9fad0e70 ("io_uring: Add io_uring command support for sockets")
Link: https://lore.kernel.org/r/20250121-uring-sockcmd-fix-v1-1-add742802a29@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit c9a40292a4 upstream.
io_eventfd_do_signal() is invoked from an RCU callback, but when
dropping the reference to the io_ev_fd, it calls io_eventfd_free()
directly if the refcount drops to zero. This isn't correct, as any
potential freeing of the io_ev_fd should be deferred another RCU grace
period.
Just call io_eventfd_put() rather than open-code the dec-and-test and
free, which will correctly defer it another RCU grace period.
Fixes: 21a091b970 ("io_uring: signal registered eventfd to process deferred task work")
Reported-by: Jann Horn <jannh@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e33ac68e5e upstream.
BUG: KASAN: slab-use-after-free in __lock_acquire+0x370b/0x4a10 kernel/locking/lockdep.c:5089
Call Trace:
<TASK>
...
_raw_spin_lock_irqsave+0x3d/0x60 kernel/locking/spinlock.c:162
class_raw_spinlock_irqsave_constructor include/linux/spinlock.h:551 [inline]
try_to_wake_up+0xb5/0x23c0 kernel/sched/core.c:4205
io_sq_thread_park+0xac/0xe0 io_uring/sqpoll.c:55
io_sq_thread_finish+0x6b/0x310 io_uring/sqpoll.c:96
io_sq_offload_create+0x162/0x11d0 io_uring/sqpoll.c:497
io_uring_create io_uring/io_uring.c:3724 [inline]
io_uring_setup+0x1728/0x3230 io_uring/io_uring.c:3806
...
Kun Hu reports that the SQPOLL creating error path has UAF, which
happens if io_uring_alloc_task_context() fails and then io_sq_thread()
manages to run and complete before the rest of error handling code,
which means io_sq_thread_finish() is looking at already killed task.
Note that this is mostly theoretical, requiring fault injection on
the allocation side to trigger in practice.
Cc: stable@vger.kernel.org
Reported-by: Kun Hu <huk23@m.fudan.edu.cn>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0f2f1aa5729332612bd01fe0f2f385fd1f06ce7c.1735231717.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit c0a9d496e0 upstream.
Some file systems, ocfs2 in this case, will return -EOPNOTSUPP for
an IOCB_NOWAIT read/write attempt. While this can be argued to be
correct, the usual return value for something that requires blocking
issue is -EAGAIN.
A refactoring io_uring commit dropped calling kiocb_done() for
negative return values, which is otherwise where we already do that
transformation. To ensure we catch it in both spots, check it in
__io_read() itself as well.
Reported-by: Robert Sander <r.sander@heinlein-support.de>
Link: https://fosstodon.org/@gurubert@mastodon.gurubert.de/113112431889638440
Cc: stable@vger.kernel.org
Fixes: a08d195b58 ("io_uring/rw: split io_read() into a helper")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit a08d195b58 upstream.
Add __io_read() which does the grunt of the work, leaving the completion
side to the new io_read(). No functional changes in this patch.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
(cherry picked from commit a08d195b58)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dbd2ca9367 upstream.
task work can be executed after the task has gone through io_uring
termination, whether it's the final task_work run or the fallback path.
In this case, task work will find ->io_wq being already killed and
null'ed, which is a problem if it then tries to forward the request to
io_queue_iowq(). Make io_queue_iowq() fail requests in this case.
Note that it also checks PF_KTHREAD, because the user can first close
a DEFER_TASKRUN ring and shortly after kill the task, in which case
->iowq check would race.
Cc: stable@vger.kernel.org
Fixes: 50c52250e2 ("block: implement async io_uring discard cmd")
Fixes: 773af69121 ("io_uring: always reissue from task_work context")
Reported-by: Will <willsroot@protonmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/63312b4a2c2bb67ad67b857d17a300e1d3b078e8.1734637909.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 12d908116f upstream.
Currently, io_uring_unreg_ringfd() (which cleans up registered rings) is
only called on exit, but __io_uring_free (which frees the tctx in which the
registered ring pointers are stored) is also called on execve (via
begin_new_exec -> io_uring_task_cancel -> __io_uring_cancel ->
io_uring_cancel_generic -> __io_uring_free).
This means: A process going through execve while having registered rings
will leak references to the rings' `struct file`.
Fix it by zapping registered rings on execve(). This is implemented by
moving the io_uring_unreg_ringfd() from io_uring_files_cancel() into its
callee __io_uring_cancel(), which is called from io_uring_task_cancel() on
execve.
This could probably be exploited *on 32-bit kernels* by leaking 2^32
references to the same ring, because the file refcount is stored in a
pointer-sized field and get_file() doesn't have protection against
refcount overflow, just a WARN_ONCE(); but on 64-bit it should have no
impact beyond a memory leak.
Cc: stable@vger.kernel.org
Fixes: e7a6c00dc7 ("io_uring: add support for registering ring file descriptors")
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20241218-uring-reg-ring-cleanup-v1-1-8f63e999045b@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7eb75ce752 ]
syzbot triggered the following WARN_ON:
WARNING: CPU: 0 PID: 16 at io_uring/tctx.c:51 __io_uring_free+0xfa/0x140 io_uring/tctx.c:51
which is the
WARN_ON_ONCE(!xa_empty(&tctx->xa));
sanity check in __io_uring_free() when a io_uring_task is going through
its final put. The syzbot test case includes injecting memory allocation
failures, and it very much looks like xa_store() can fail one of its
memory allocations and end up with ->head being non-NULL even though no
entries exist in the xarray.
Until this issue gets sorted out, work around it by attempting to
iterate entries in our xarray, and WARN_ON_ONCE() if one is found.
Reported-by: syzbot+cc36d44ec9f368e443d3@syzkaller.appspotmail.com
Link: https://lore.kernel.org/io-uring/673c1643.050a0220.87769.0066.GAE@google.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 73254a297c upstream.
The io_register_iowq_max_workers() function calls io_put_sq_data(),
which acquires the sqd->lock without releasing the uring_lock.
Similar to the commit 009ad9f0c6 ("io_uring: drop ctx->uring_lock
before acquiring sqd->lock"), this can lead to a potential deadlock
situation.
To resolve this issue, the uring_lock is released before calling
io_put_sq_data(), and then it is re-acquired after the function call.
This change ensures that the locks are acquired in the correct
order, preventing the possibility of a deadlock.
Suggested-by: Maximilian Heyne <mheyne@amazon.de>
Signed-off-by: Hagar Hemdan <hagarhem@amazon.com>
Link: https://lore.kernel.org/r/20240604130527.3597-1-hagarhem@amazon.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1d60d74e85 ]
When io_uring starts a write, it'll call kiocb_start_write() to bump the
super block rwsem, preventing any freezes from happening while that
write is in-flight. The freeze side will grab that rwsem for writing,
excluding any new writers from happening and waiting for existing writes
to finish. But io_uring unconditionally uses kiocb_start_write(), which
will block if someone is currently attempting to freeze the mount point.
This causes a deadlock where freeze is waiting for previous writes to
complete, but the previous writes cannot complete, as the task that is
supposed to complete them is blocked waiting on starting a new write.
This results in the following stuck trace showing that dependency with
the write blocked starting a new write:
task:fio state:D stack:0 pid:886 tgid:886 ppid:876
Call trace:
__switch_to+0x1d8/0x348
__schedule+0x8e8/0x2248
schedule+0x110/0x3f0
percpu_rwsem_wait+0x1e8/0x3f8
__percpu_down_read+0xe8/0x500
io_write+0xbb8/0xff8
io_issue_sqe+0x10c/0x1020
io_submit_sqes+0x614/0x2110
__arm64_sys_io_uring_enter+0x524/0x1038
invoke_syscall+0x74/0x268
el0_svc_common.constprop.0+0x160/0x238
do_el0_svc+0x44/0x60
el0_svc+0x44/0xb0
el0t_64_sync_handler+0x118/0x128
el0t_64_sync+0x168/0x170
INFO: task fsfreeze:7364 blocked for more than 15 seconds.
Not tainted 6.12.0-rc5-00063-g76aaf945701c #7963
with the attempting freezer stuck trying to grab the rwsem:
task:fsfreeze state:D stack:0 pid:7364 tgid:7364 ppid:995
Call trace:
__switch_to+0x1d8/0x348
__schedule+0x8e8/0x2248
schedule+0x110/0x3f0
percpu_down_write+0x2b0/0x680
freeze_super+0x248/0x8a8
do_vfs_ioctl+0x149c/0x1b18
__arm64_sys_ioctl+0xd0/0x1a0
invoke_syscall+0x74/0x268
el0_svc_common.constprop.0+0x160/0x238
do_el0_svc+0x44/0x60
el0_svc+0x44/0xb0
el0t_64_sync_handler+0x118/0x128
el0t_64_sync+0x168/0x170
Fix this by having the io_uring side honor IOCB_NOWAIT, and only attempt a
blocking grab of the super block rwsem if it isn't set. For normal issue
where IOCB_NOWAIT would always be set, this returns -EAGAIN which will
have io_uring core issue a blocking attempt of the write. That will in
turn also get completions run, ensuring forward progress.
Since freezing requires CAP_SYS_ADMIN in the first place, this isn't
something that can be triggered by a regular user.
Cc: stable@vger.kernel.org # 5.10+
Reported-by: Peter Mann <peter.mann@sh.cz>
Link: https://lore.kernel.org/io-uring/38c94aec-81c9-4f62-b44e-1d87f5597644@sh.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 28aabffae6 upstream.
When an application uses SQPOLL, it must wait for the SQPOLL thread to
consume SQE entries, if it fails to get an sqe when calling
io_uring_get_sqe(). It can do so by calling io_uring_enter(2) with the
flag value of IORING_ENTER_SQ_WAIT. In liburing, this is generally done
with io_uring_sqring_wait(). There's a natural expectation that once
this call returns, a new SQE entry can be retrieved, filled out, and
submitted. However, the kernel uses the cached sq head to determine if
the SQRING is full or not. If the SQPOLL thread is currently in the
process of submitting SQE entries, it may have updated the cached sq
head, but not yet committed it to the SQ ring. Hence the kernel may find
that there are SQE entries ready to be consumed, and return successfully
to the application. If the SQPOLL thread hasn't yet committed the SQ
ring entries by the time the application returns to userspace and
attempts to get a new SQE, it will fail getting a new SQE.
Fix this by having io_sqring_full() always use the user visible SQ ring
head entry, rather than the internally cached one.
Cc: stable@vger.kernel.org # 5.10+
Link: https://github.com/axboe/liburing/discussions/1267
Reported-by: Benedek Thaler <thaler@thaler.hu>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit eac2ca2d68 ]
In terms of normal application usage, this list will always be empty.
And if an application does overflow a bit, it'll have a few entries.
However, nothing obviously prevents syzbot from running a test case
that generates a ton of overflow entries, and then flushing them can
take quite a while.
Check for needing to reschedule while flushing, and drop our locks and
do so if necessary. There's no state to maintain here as overflows
always prune from head-of-list, hence it's fine to drop and reacquire
the locks at the end of the loop.
Link: https://lore.kernel.org/io-uring/66ed061d.050a0220.29194.0053.GAE@google.com/
Reported-by: syzbot+5fca234bd7eb378ff78e@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c314094cb4 ]
If the recv returns zero, or an error, then it doesn't matter if more
data has already been received for this buffer. A condition like that
should terminate the multishot receive. Rather than pass in the
collected return value, pass in whether to terminate or keep the recv
going separately.
Note that this isn't a bug right now, as the only way to get there is
via setting MSG_WAITALL with multishot receive. And if an application
does that, then -EINVAL is returned anyway. But it seems like an easy
bug to introduce, so let's make it a bit more explicit.
Link: https://github.com/axboe/liburing/issues/1246
Cc: stable@vger.kernel.org
Fixes: b3fdea6ecb ("io_uring: multishot recv")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a09c17240b upstream.
A recent commit ensured that SQPOLL cannot be setup with a CPU that
isn't in the current tasks cpuset, but it also dropped testing whether
the CPU is valid in the first place. Without that, if a task passes in
a CPU value that is too high, the following KASAN splat can get
triggered:
BUG: KASAN: stack-out-of-bounds in io_sq_offload_create+0x858/0xaa4
Read of size 8 at addr ffff800089bc7b90 by task wq-aff.t/1391
CPU: 4 UID: 1000 PID: 1391 Comm: wq-aff.t Not tainted 6.11.0-rc7-00227-g371c468f4db6 #7080
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace.part.0+0xcc/0xe0
show_stack+0x14/0x1c
dump_stack_lvl+0x58/0x74
print_report+0x16c/0x4c8
kasan_report+0x9c/0xe4
__asan_report_load8_noabort+0x1c/0x24
io_sq_offload_create+0x858/0xaa4
io_uring_setup+0x1394/0x17c4
__arm64_sys_io_uring_setup+0x6c/0x180
invoke_syscall+0x6c/0x260
el0_svc_common.constprop.0+0x158/0x224
do_el0_svc+0x3c/0x5c
el0_svc+0x34/0x70
el0t_64_sync_handler+0x118/0x124
el0t_64_sync+0x168/0x16c
The buggy address belongs to stack of task wq-aff.t/1391
and is located at offset 48 in frame:
io_sq_offload_create+0x0/0xaa4
This frame has 1 object:
[32, 40) 'allowed_mask'
The buggy address belongs to the virtual mapping at
[ffff800089bc0000, ffff800089bc9000) created by:
kernel_clone+0x124/0x7e0
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff0000d740af80 pfn:0x11740a
memcg:ffff0000c2706f02
flags: 0xbffe00000000000(node=0|zone=2|lastcpupid=0x1fff)
raw: 0bffe00000000000 0000000000000000 dead000000000122 0000000000000000
raw: ffff0000d740af80 0000000000000000 00000001ffffffff ffff0000c2706f02
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff800089bc7a80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff800089bc7b00: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1
>ffff800089bc7b80: 00 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
^
ffff800089bc7c00: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1
ffff800089bc7c80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f3
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202409161632.cbeeca0d-lkp@intel.com
Fixes: f011c9cf04 ("io_uring/sqpoll: do not allow pinning outside of cpuset")
Tested-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 04beb6e0e0 upstream.
If some part of the kernel adds task_work that needs executing, in terms
of signaling it'll generally use TWA_SIGNAL or TWA_RESUME. Those two
directly translate to TIF_NOTIFY_SIGNAL or TIF_NOTIFY_RESUME, and can
be used for a variety of use case outside of task_work.
However, io_cqring_wait_schedule() only tests explicitly for
TIF_NOTIFY_SIGNAL. This means it can miss if task_work got added for
the task, but used a different kind of signaling mechanism (or none at
all). Normally this doesn't matter as any task_work will be run once
the task exits to userspace, except if:
1) The ring is setup with DEFER_TASKRUN
2) The local work item may generate normal task_work
For condition 2, this can happen when closing a file and it's the final
put of that file, for example. This can cause stalls where a task is
waiting to make progress inside io_cqring_wait(), but there's nothing else
that will wake it up. Hence change the "should we schedule or loop around"
check to check for the presence of task_work explicitly, rather than just
TIF_NOTIFY_SIGNAL as the mechanism. While in there, also change the
ordering of what type of task_work first in terms of ordering, to both
make it consistent with other task_work runs in io_uring, but also to
better handle the case of defer task_work generating normal task_work,
like in the above example.
Reported-by: Jan Hendrik Farr <kernel@jfarr.cc>
Link: https://github.com/axboe/liburing/issues/1235
Cc: stable@vger.kernel.org
Fixes: 846072f16e ("io_uring: mimimise io_cqring_wait_schedule")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f011c9cf04 upstream.
The submit queue polling threads are userland threads that just never
exit to the userland. When creating the thread with IORING_SETUP_SQ_AFF,
the affinity of the poller thread is set to the cpu specified in
sq_thread_cpu. However, this CPU can be outside of the cpuset defined
by the cgroup cpuset controller. This violates the rules defined by the
cpuset controller and is a potential issue for realtime applications.
In b7ed6d8ffd6 we fixed the default affinity of the poller thread, in
case no explicit pinning is required by inheriting the one of the
creating task. In case of explicit pinning, the check is more
complicated, as also a cpu outside of the parent cpumask is allowed.
We implemented this by using cpuset_cpus_allowed (that has support for
cgroup cpusets) and testing if the requested cpu is in the set.
Fixes: 37d1e2e364 ("io_uring: move SQPOLL thread io-wq forked worker")
Cc: stable@vger.kernel.org # 6.1+
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Link: https://lore.kernel.org/r/20240909150036.55921-1-felix.moessbauer@siemens.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0997aa5497 ]
The io worker threads are userland threads that just never exit to the
userland. By that, they are also assigned to a cgroup (the group of the
creating task).
When changing the affinity of the io_wq thread via syscall, we must only
allow cpumasks within the limits defined by the cpuset controller of the
cgroup (if enabled).
Fixes: da64d6db3b ("io_uring: One wqe per wq")
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Link: https://lore.kernel.org/r/20240910171157.166423-2-felix.moessbauer@siemens.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f8b632e89a upstream.
io_uring_cancel_generic() should retry if any state changes like a
request is completed, however in case of a task exit it only goes for
another loop and avoids schedule() if any tracked (i.e. REQ_F_INFLIGHT)
request got completed.
Let's assume we have a non-tracked request executing in iowq and a
tracked request linked to it. Let's also assume
io_uring_cancel_generic() fails to find and cancel the request, i.e.
via io_run_local_work(), which may happen as io-wq has gaps.
Next, the request logically completes, io-wq still hold a ref but queues
it for completion via tw, which happens in
io_uring_try_cancel_requests(). After, right before prepare_to_wait()
io-wq puts the request, grabs the linked one and tries executes it, e.g.
arms polling. Finally the cancellation loop calls prepare_to_wait(),
there are no tw to run, no tracked request was completed, so the
tctx_inflight() check passes and the task is put to indefinite sleep.
Cc: stable@vger.kernel.org
Fixes: 3f48cf18f8 ("io_uring: unify files and task cancel")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/acac7311f4e02ce3c43293f8f1fda9c705d158f1.1721819383.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0453aad676 upstream.
If io-wq worker creation fails, we retry it by queueing up a task_work.
tasK_work is needed because it should be done from the user process
context. The problem is that retries are not limited, and if queueing a
task_work is the reason for the failure, we might get into an infinite
loop.
It doesn't seem to happen now but it would with the following patch
executing task_work in the freezer's loop. For now, arbitrarily limit the
number of attempts to create a worker.
Cc: stable@vger.kernel.org
Fixes: 3146cba99a ("io-wq: make worker creation resilient against signals")
Reported-by: Julian Orth <ju.orth@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8280436925db88448c7c85c6656edee1a43029ea.1720634146.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c4ce0ab276 ]
kmemleak complains that there's a memory leak related to connect
handling:
unreferenced object 0xffff0001093bdf00 (size 128):
comm "iou-sqp-455", pid 457, jiffies 4294894164
hex dump (first 32 bytes):
02 00 fa ea 7f 00 00 01 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 2e481b1a):
[<00000000c0a26af4>] kmemleak_alloc+0x30/0x38
[<000000009c30bb45>] kmalloc_trace+0x228/0x358
[<000000009da9d39f>] __audit_sockaddr+0xd0/0x138
[<0000000089a93e34>] move_addr_to_kernel+0x1a0/0x1f8
[<000000000b4e80e6>] io_connect_prep+0x1ec/0x2d4
[<00000000abfbcd99>] io_submit_sqes+0x588/0x1e48
[<00000000e7c25e07>] io_sq_thread+0x8a4/0x10e4
[<00000000d999b491>] ret_from_fork+0x10/0x20
which can can happen if:
1) The command type does something on the prep side that triggers an
audit call.
2) The thread hasn't done any operations before this that triggered
an audit call inside ->issue(), where we have audit_uring_entry()
and audit_uring_exit().
Work around this by issuing a blanket NOP operation before the SQPOLL
does anything.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91215f70ea ]
Clang static checker (scan-build) warning:
o_uring/io-wq.c:line 1051, column 3
The expression is an uninitialized value. The computed value will
also be garbage.
'match.nr_pending' is used in io_acct_cancel_pending_work(), but it is
not fully initialized. Change the order of assignment for 'match' to fix
this problem.
Fixes: 42abc95f05 ("io-wq: decouple work_list protection from the big wqe->lock")
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20240604121242.2661244-1-suhui@nfschina.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a56530492 ]
Utilize set_bit() and test_bit() on worker->flags within io_uring/io-wq
to address potential data races.
The structure io_worker->flags may be accessed through various data
paths, leading to concurrency issues. When KCSAN is enabled, it reveals
data races occurring in io_worker_handle_work and
io_wq_activate_free_worker functions.
BUG: KCSAN: data-race in io_worker_handle_work / io_wq_activate_free_worker
write to 0xffff8885c4246404 of 4 bytes by task 49071 on cpu 28:
io_worker_handle_work (io_uring/io-wq.c:434 io_uring/io-wq.c:569)
io_wq_worker (io_uring/io-wq.c:?)
<snip>
read to 0xffff8885c4246404 of 4 bytes by task 49024 on cpu 5:
io_wq_activate_free_worker (io_uring/io-wq.c:? io_uring/io-wq.c:285)
io_wq_enqueue (io_uring/io-wq.c:947)
io_queue_iowq (io_uring/io_uring.c:524)
io_req_task_submit (io_uring/io_uring.c:1511)
io_handle_tw_list (io_uring/io_uring.c:1198)
<snip>
Line numbers against commit 18daea77cc ("Merge tag 'for-linus' of
git://git.kernel.org/pub/scm/virt/kvm/kvm").
These races involve writes and reads to the same memory location by
different tasks running on different CPUs. To mitigate this, refactor
the code to use atomic operations such as set_bit(), test_bit(), and
clear_bit() instead of basic "and" and "or" operations. This ensures
thread-safe manipulation of worker flags.
Also, move `create_index` to avoid holes in the structure.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240507170002.2269003-1-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 91215f70ea ("io_uring/io-wq: avoid garbage value of 'match' in io_wq_enqueue()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 54559642b9 upstream.
There is a report of io_rsrc_ref_quiesce() locking a mutex while not
TASK_RUNNING, which is due to forgetting restoring the state back after
io_run_task_work_sig() and attempts to break out of the waiting loop.
do not call blocking ops when !TASK_RUNNING; state=1 set at
[<ffffffff815d2494>] prepare_to_wait+0xa4/0x380
kernel/sched/wait.c:237
WARNING: CPU: 2 PID: 397056 at kernel/sched/core.c:10099
__might_sleep+0x114/0x160 kernel/sched/core.c:10099
RIP: 0010:__might_sleep+0x114/0x160 kernel/sched/core.c:10099
Call Trace:
<TASK>
__mutex_lock_common kernel/locking/mutex.c:585 [inline]
__mutex_lock+0xb4/0x940 kernel/locking/mutex.c:752
io_rsrc_ref_quiesce+0x590/0x940 io_uring/rsrc.c:253
io_sqe_buffers_unregister+0xa2/0x340 io_uring/rsrc.c:799
__io_uring_register io_uring/register.c:424 [inline]
__do_sys_io_uring_register+0x5b9/0x2400 io_uring/register.c:613
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xd8/0x270 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x6f/0x77
Reported-by: Li Shi <sl1589472800@gmail.com>
Fixes: 4ea15b56f0 ("io_uring/rsrc: use wq for quiescing")
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/77966bc104e25b0534995d5dbb152332bc8f31c0.1718196953.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 068c27e32e ]
Commit 361aee450c ("io-wq: add intermediate work step between pending
list and active work") closed a race between a cancellation and the work
being removed from the wq for execution. To ensure the request is
always reachable by the cancellation, we need to move it within the wq
lock, which also synchronizes the cancellation. But commit
42abc95f05 ("io-wq: decouple work_list protection from the big
wqe->lock") replaced the wq lock here and accidentally reintroduced the
race by releasing the acct_lock too early.
In other words:
worker | cancellation
work = io_get_next_work() |
raw_spin_unlock(&acct->lock); |
|
| io_acct_cancel_pending_work
| io_wq_worker_cancel()
worker->next_work = work
Using acct_lock is still enough since we synchronize on it on
io_acct_cancel_pending_work.
Fixes: 42abc95f05 ("io-wq: decouple work_list protection from the big wqe->lock")
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20240416021054.3940-2-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22537c9f79 ]
io_task_work_pending() uses wq_list_empty() on ctx->work_llist, but it's
not an io_wq_work_list, it's a struct llist_head. They both have
->first as head-of-list, and it turns out the checks are identical. But
be proper and use the right helper.
Fixes: dac6a0eae7 ("io_uring: ensure iopoll runs local task work as well")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e21e1c45e1 ]
If failure happens before the opcode prep handler is called, ensure that
we clear the opcode specific area of the request, which holds data
specific to that request type. This prevents errors where opcode
handlers either don't get to clear per-request private data since prep
isn't even called.
Reported-and-tested-by: syzbot+f8e9a371388aa62ecab4@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 561e4f9451 upstream.
If we look up the kbuf, ensure that it doesn't get unregistered until
after we're done with it. Since we're inside mmap, we cannot safely use
the io_uring lock. Rely on the fact that we can lookup the buffer list
under RCU now and grab a reference to it, preventing it from being
unregistered until we're done with it. The lookup returns the
io_buffer_list directly with it referenced.
Cc: stable@vger.kernel.org # v6.4+
Fixes: 5cf4f52e6d ("io_uring: free io_buffer_list entries via RCU")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b69c4ab4f upstream.
No functional changes in this patch, just in preparation for being able
to keep the buffer list alive outside of the ctx->uring_lock.
Cc: stable@vger.kernel.org # v6.4+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3b80cff5a4 upstream.
Now that xarray is being exclusively used for the buffer_list lookup,
this check is no longer needed. Get rid of it and the is_ready member.
Cc: stable@vger.kernel.org # v6.4+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Begunkov