[ Upstream commit 7e24ec93ae ]
As reported by the kernel test robot, the following error occurs:
sound/soc/amd/yc/acp6x-mach.c: In function 'acp6x_probe':
>> sound/soc/amd/yc/acp6x-mach.c:573:15: error: implicit declaration of function 'acpi_evaluate_integer'; did you mean 'acpi_evaluate_object'? [-Werror=implicit-function-declaration]
573 | ret = acpi_evaluate_integer(handle, "_WOV", NULL, &dmic_status);
| ^~~~~~~~~~~~~~~~~~~~~
| acpi_evaluate_object
cc1: some warnings being treated as errors
The function 'acpi_evaluate_integer' and its prototype in 'acpi_bus.h'
are only available when 'CONFIG_ACPI' is enabled. Add a 'depends on ACPI'
directive in Kconfig to ensure proper compilation.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501090345.pBIDRTym-lkp@intel.com/
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Link: https://patch.msgid.link/20250109171547.362412-1-eleanor15x@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5323186e2e ]
In commit
9e2ab4b18e ("ASoC: rockchip: i2s-tdm: Fix inaccurate sampling rates"),
the set_sysclk callback was removed as considered unused as the mclk rate
can be set in the hw_params callback.
The difference between hw_params and set_sysclk is that the former is
called with the audio sampling rate set in the params (e.g.: 48000 Hz)
while the latter is called with a clock rate already computed with
sampling_rate * mclk-fs (e.g.: 48000 * 256)
For HDMI audio using the Rockchip I2S TDM driver, the mclk-fs value must
be set to 128 instead of the default 256, and that value is set in the
device tree at the machine driver level (like a simple-audio-card
compatible node).
Therefore, the i2s_tdm driver has no idea that another mclk-fs value can
be configured and simply computes the mclk rate in the hw_params callback
with DEFAULT_MCLK_FS * params_rate(params), which is wrong for HDMI
audio.
Re-add the set_sysclk callback so that the mclk rate is computed by the
machine driver which has the correct mclk-fs value set in its device tree
node.
Fixes: 9e2ab4b18e ("ASoC: rockchip: i2s-tdm: Fix inaccurate sampling rates")
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Link: https://patch.msgid.link/20250117163102.65807-1-detlev.casanova@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9001d51544 ]
CONFIG_SND_SEQ_UMP_CLIENT is a Kconfig for a sequencer client
corresponding to the UMP rawmidi, while we have another major knob
CONFIG_SND_SEQ_UMP that specifies whether the sequencer core supports
UMP packets or not. Strictly speaking both of them are independent,
but practically seen, it makes no sense to enable
CONFIG_SND_SEQ_UMP_CLIENT without UMP support itself.
This patch makes such an implicit dependency clearer. Now
CONFIG_SND_SEQ_UMP_CLIENT depends on both CONFIG_SND_UMP and
CONFIG_SND_SEQ_UMP. Meanwhile, CONFIG_SND_SEQ_UMP is enabled as
default when CONFIG_SND_UMP is set.
Fixes: 81fd444aa3 ("ALSA: seq: Bind UMP device")
Link: https://patch.msgid.link/20250101125548.25961-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a2319308d ]
There have been intermittent issues with the SPDIF output on H3
and H2+ devices which has been fixed by setting the s_clk to 4
times the audio pll.
Add a quirk for the clock multiplier as not every supported SoC
requires it. Without the multiplier, the audio at normal sampling
rates was distorted and did not play at higher sampling rates.
Fixes: 1bd92af877 ("ASoC: sun4i-spdif: Add support for the H3 SoC")
Signed-off-by: George Lander <lander@jagmn.com>
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Link: https://patch.msgid.link/20241111165600.57219-2-codekipper@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9722c3b66e ]
The of_property_for_each_u32() macro needs five parameters, two of which
are primarily meant as internal variables for the macro itself (in the
for() clause). Yet these two parameters are used by a few drivers, and this
can be considered misuse or at least bad practice.
Now that the kernel uses C11 to build, these two parameters can be avoided
by declaring them internally, thus changing this pattern:
struct property *prop;
const __be32 *p;
u32 val;
of_property_for_each_u32(np, "xyz", prop, p, val) { ... }
to this:
u32 val;
of_property_for_each_u32(np, "xyz", val) { ... }
However two variables cannot be declared in the for clause even with C11,
so declare one struct that contain the two variables we actually need. As
the variables inside this struct are not meant to be used by users of this
macro, give the struct instance the noticeable name "_it" so it is visible
during code reviews, helping to avoid new code to use it directly.
Most usages are trivially converted as they do not use those two
parameters, as expected. The non-trivial cases are:
- drivers/clk/clk.c, of_clk_get_parent_name(): easily doable anyway
- drivers/clk/clk-si5351.c, si5351_dt_parse(): this is more complex as the
checks had to be replicated in a different way, making code more verbose
and somewhat uglier, but I refrained from a full rework to keep as much
of the original code untouched having no hardware to test my changes
All the changes have been build tested. The few for which I have the
hardware have been runtime-tested too.
Reviewed-by: Andre Przywara <andre.przywara@arm.com> # drivers/clk/sunxi/clk-simple-gates.c, drivers/clk/sunxi/clk-sun8i-bus-gates.c
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # drivers/gpio/gpio-brcmstb.c
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> # drivers/irqchip/irq-atmel-aic-common.c
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # drivers/iio/adc/ti_am335x_adc.c
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> # drivers/pwm/pwm-samsung.c
Acked-by: Richard Leitner <richard.leitner@linux.dev> # drivers/usb/misc/usb251xb.c
Acked-by: Mark Brown <broonie@kernel.org> # sound/soc/codecs/arizona.c
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> # sound/soc/codecs/arizona.c
Acked-by: Michael Ellerman <mpe@ellerman.id.au> # arch/powerpc/sysdev/xive/spapr.c
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20240724-of_property_for_each_u32-v3-1-bea82ce429e2@bootlin.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Stable-dep-of: 28fa3291ca ("clk: fix an OF node reference leak in of_clk_get_parent_name()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32c9c06adb ]
On Chromebooks based on Mediatek MT8195 or MT8188, the audio frontend
(AFE) is limited to accessing a very small window (1 MiB) of memory,
which is described as a reserved memory region in the device tree.
On these two platforms, the maximum buffer size is given as 512 KiB.
The MediaTek common code uses the same value for preallocations. This
means that only the first two PCM substreams get preallocations, and
then the whole space is exhausted, barring any other substreams from
working. Since the substreams used are not always the first two, this
means audio won't work correctly.
This is observed on the MT8188 Geralt Chromebooks, on which the
"mediatek,dai-link" property was dropped when it was upstreamed. That
property causes the driver to only register the PCM substreams listed
in the property, and in the order given.
Instead of trying to compute an optimal value and figuring out which
streams are used, simply disable preallocation. The PCM buffers are
managed by the core and are allocated and released on the fly. There
should be no impact to any of the other MediaTek platforms.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20241219105303.548437-1-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b50a3e9844 ]
UAC 2 & 3 DAC's set bit 31 of the format to signal support for a
RAW_DATA type, typically used for DSD playback.
This is correctly tested by (format & UAC*_FORMAT_TYPE_I_RAW_DATA),
fp->dsd_raw = true; and call snd_usb_interface_dsd_format_quirks(),
however a confusing and unnecessary message gets printed because
the bit is not properly tested in the last "unsupported" if test:
if (format & ~0x3F) { ... }
For example the output:
usb 7-1: new high-speed USB device number 5 using xhci_hcd
usb 7-1: New USB device found, idVendor=262a, idProduct=9302, bcdDevice=0.01
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
usb 7-1: Product: TC44C
usb 7-1: Manufacturer: TC44C
usb 7-1: SerialNumber: 5000000001
hid-generic 0003:262A:9302.001E: No inputs registered, leaving
hid-generic 0003:262A:9302.001E: hidraw6: USB HID v1.00 Device [DDHIFI TC44C] on usb-0000:08:00.3-1/input0
usb 7-1: 2:4 : unsupported format bits 0x100000000
This last "unsupported format" is actually wrong: we know the
format is a RAW_DATA which we assume is DSD, so there is no need
to print the confusing message.
This we unset bit 31 of the format after recognizing it, to avoid
the message.
Suggested-by: Takashi Iwai <tiwai@suse.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Link: https://patch.msgid.link/20241209090529.16134-2-adrian.ratiu@collabora.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50db91fcce ]
Introduces the alc2xx-fixup-headset-mic model to simplify enabling
headset microphones on ALC2XX codecs.
Many recent configurations, as well as older systems that lacked this
fix for a long time, leave headset microphones inactive by default.
This addition provides a flexible workaround using the existing
ALC2XX_FIXUP_HEADSET_MIC quirk.
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://patch.msgid.link/20241207201836.6879-1-kovalev@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c005292e2 ]
CA0132 used the PCI SSID lookup helper that doesn't support the model
string matching or quirk aliasing.
Replace it with the standard HD-audio quirk helpers for supporting
those, and add the definition of the model strings for supported
quirks, too. There should be no visible change to the outside for the
working system, but the driver will parse the model option and apply
the quirk based on it from now on.
Link: https://patch.msgid.link/20241207133754.3658-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b5f8ee43e ]
The SH DAC audio driver uses the kmalloc'ed buffer as the main PCM
buffer, and the data is transferred via hrtimer callbacks manually
from there to the hardware. Meanwhile, some of its code are written
as if the buffer is on iomem and use the special helpers for the iomem
(e.g. copy_from_iter_toio() or memset_io()). Those are rather useless
and the standard helpers should be used.
Similarly, the PCM mmap callback is set to a special one with
snd_pcm_lib_mmap_iomem, but this is also nonsense, because SH
architecture doesn't support this function, hence it leads just to
NULL -- the fallback to the standard helper.
This patch replaces those special setups with the standard ones.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411281337.I4M07b7i-lkp@intel.com/
Link: https://patch.msgid.link/20241128104939.13755-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kuan-Wei Chiu