[ Upstream commit 5c30a038fb ]
When intel_pstate test is skipped because of unmet dependencies and/or
unsupported configuration, it returns 0 which is treated as a pass
by the Kselftest framework. This leads to false positive result even
when the test could not be run.
Change it to return kselftest skip code when a test gets skipped to
clearly report that the test could not be run.
Kselftest framework SKIP code is 4 and the framework prints appropriate
messages to indicate that the test is skipped.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b27f0259e8 ]
When memfd test is skipped because of unmet dependencies and/or unsupported
configuration, it returns non-zero value which is treated as a fail by the
Kselftest framework. This leads to false negative result even when the test
could not be run.
Change it to return kselftest skip code when a test gets skipped to clearly
report that the test could not be run.
Added an explicit check for root user at the start of memfd hugetlbfs test
and return skip code if a non-root user attempts to run it.
In addition, return skip code when not enough huge pages are available to
run the test.
Kselftest framework SKIP code is 4 and the framework prints appropriate
messages to indicate that the test is skipped.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e9d33f149f ]
A few changes improve the overall usability of the test:
* fix a hard-coded maximum frequency (3300),
* don't adjust the CPU frequency if only evaluating results,
* fix a comparison for multiple frequencies.
A symptom of that last issue looked like this:
./run.sh: line 107: [: too many arguments
./run.sh: line 110: 3099
3099
3100-3100: syntax error in expression (error token is \"3099
3100-3100\")
Because a check will count how many differente frequencies
there are among the CPUs of the system, and after they are
tallied another read is performed, which might produce
different results.
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9feeb638cd upstream.
In 2016 GNU Make made a backwards incompatible change to the way '#'
characters were handled in Makefiles when used inside functions or
macros:
http://git.savannah.gnu.org/cgit/make.git/commit/?id=c6966b323811c37acedff05b57
Due to this change, when attempting to run `make prepare' I get a
spurious make syntax error:
/home/earnest/linux/tools/objtool/.fixdep.o.cmd:1: *** missing separator. Stop.
When inspecting `.fixdep.o.cmd' it includes two lines which use
unescaped comment characters at the top:
\# cannot find fixdep (/home/earnest/linux/tools/objtool//fixdep)
\# using basic dep data
This is because `tools/build/Build.include' prints these '\#'
characters:
printf '\# cannot find fixdep (%s)\n' $(fixdep) > $(dot-target).cmd; \
printf '\# using basic dep data\n\n' >> $(dot-target).cmd; \
This completes commit 9564a8cf42 ("Kbuild: fix # escaping in .cmd files
for future Make").
Link: https://bugzilla.kernel.org/show_bug.cgi?id=197847
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9564a8cf42 upstream.
I tried building using a freshly built Make (4.2.1-69-g8a731d1), but
already the objtool build broke with
orc_dump.c: In function ‘orc_dump’:
orc_dump.c:106:2: error: ‘elf_getshnum’ is deprecated [-Werror=deprecated-declarations]
if (elf_getshdrnum(elf, &nr_sections)) {
Turns out that with that new Make, the backslash was not removed, so cpp
didn't see a #include directive, grep found nothing, and
-DLIBELF_USE_DEPRECATED was wrongly put in CFLAGS.
Now, that new Make behaviour is documented in their NEWS file:
* WARNING: Backward-incompatibility!
Number signs (#) appearing inside a macro reference or function invocation
no longer introduce comments and should not be escaped with backslashes:
thus a call such as:
foo := $(shell echo '#')
is legal. Previously the number sign needed to be escaped, for example:
foo := $(shell echo '\#')
Now this latter will resolve to "\#". If you want to write makefiles
portable to both versions, assign the number sign to a variable:
C := \#
foo := $(shell echo '$C')
This was claimed to be fixed in 3.81, but wasn't, for some reason.
To detect this change search for 'nocomment' in the .FEATURES variable.
This also fixes up the two make-cmd instances to replace # with $(pound)
rather than with \#. There might very well be other places that need
similar fixup in preparation for whatever future Make release contains
the above change, but at least this builds an x86_64 defconfig with the
new make.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=197847
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d121109100 ]
The "perf test Session topology" entry fails with core dump on s390. The root
cause is a NULL pointer dereference in function check_cpu_topology() line 76
(or line 82 without -v).
The session->header.env.cpu variable is NULL because on s390 function
process_cpu_topology() returns with error:
socket_id number is too big.
You may need to upgrade the perf tool.
and releases the env.cpu variable via zfree() and sets it to NULL.
Here is the gdb output:
(gdb) n
76 pr_debug("CPU %d, core %d, socket %d\n", i,
(gdb) n
Program received signal SIGSEGV, Segmentation fault.
0x00000000010f4d9e in check_cpu_topology (path=0x3ffffffd6c8
"/tmp/perf-test-J6CHMa", map=0x14a1740) at tests/topology.c:76
76 pr_debug("CPU %d, core %d, socket %d\n", i,
(gdb)
Make sure the env.cpu variable is not used when its NULL.
Test for NULL pointer and return TEST_SKIP if so.
Output before:
[root@p23lp27 perf]# ./perf test -F 39
39: Session topology :Segmentation fault (core dumped)
[root@p23lp27 perf]#
Output after:
[root@p23lp27 perf]# ./perf test -vF 39
39: Session topology :
--- start ---
templ file: /tmp/perf-test-Ajx59D
socket_id number is too big.You may need to upgrade the perf tool.
---- end ----
Session topology: Skip
[root@p23lp27 perf]#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180528073657.11743-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 756b56a9e8 upstream.
The trigger code is picky in how it can be disabled as there may be
dependencies between different events and synthetic events. Change the order
on how triggers are reset.
1) Reset triggers of all synthetic events first
2) Remove triggers with actions attached to them
3) Remove all other triggers
If this order isn't followed, then some triggers will not be reset, and an
error may happen because a trigger is busy.
Cc: stable@vger.kernel.org
Fixes: cfa0963dc4 ("kselftests/ftrace : Add event trigger testcases")
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 815425567d ]
Here the variable cont is used as the saved_pointer for a call to
strtok_r(). It is safe to use the value uninitialized in this
context however and the later reference is only ever used if
the strtok_r is successful. But, 'gcc-5' at least doesn't have all
this knowledge so initialize cont to NULL. Additionally, do the
natural NULL check before accessing just for completness.
The warning is the following:
./bpf/tools/bpf/bpf_dbg.c: In function ‘cmd_load’:
./bpf/tools/bpf/bpf_dbg.c:1077:13: warning: ‘cont’ may be used uninitialized in this function [-Wmaybe-uninitialized]
} else if (matches(subcmd, "pcap") == 0) {
Fixes: fd981e3c32 "filter: bpf_dbg: add minimal bpf debugger"
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7dec80ccbe upstream.
With the following commit:
fd35c88b74 ("objtool: Support GCC 8 switch tables")
I added a "can't find switch jump table" warning, to stop covering up
silent failures if add_switch_table() can't find anything.
That warning found yet another bug in the objtool switch table detection
logic. For cases 1 and 2 (as described in the comments of
find_switch_table()), the find_symbol_containing() check doesn't adjust
the offset for RIP-relative switch jumps.
Incidentally, this bug was already fixed for case 3 with:
6f5ec2993b ("objtool: Detect RIP-relative switch table references")
However, that commit missed the fix for cases 1 and 2.
The different cases are now starting to look more and more alike. So
fix the bug by consolidating them into a single case, by checking the
original dynamic jump instruction in the case 3 loop.
This also simplifies the code and makes it more robust against future
switch table detection issues -- of which I'm sure there will be many...
Switch table detection has been the most fragile area of objtool, by
far. I long for the day when we'll have a GCC plugin for annotating
switch tables. Linus asked me to delay such a plugin due to the
flakiness of the plugin infrastructure in older versions of GCC, so this
rickety code is what we're stuck with for now. At least the code is now
a little simpler than it was.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/f400541613d45689086329432f3095119ffbc328.1526674218.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6f5ec2993b upstream.
Typically a switch table can be found by detecting a .rodata access
followed an indirect jump:
1969: 4a 8b 0c e5 00 00 00 mov 0x0(,%r12,8),%rcx
1970: 00
196d: R_X86_64_32S .rodata+0x438
1971: e9 00 00 00 00 jmpq 1976 <dispc_runtime_suspend+0xb6a>
1972: R_X86_64_PC32 __x86_indirect_thunk_rcx-0x4
Randy Dunlap reported a case (seen with GCC 4.8) where the .rodata
access uses RIP-relative addressing:
19bd: 48 8b 3d 00 00 00 00 mov 0x0(%rip),%rdi # 19c4 <dispc_runtime_suspend+0xbb8>
19c0: R_X86_64_PC32 .rodata+0x45c
19c4: e9 00 00 00 00 jmpq 19c9 <dispc_runtime_suspend+0xbbd>
19c5: R_X86_64_PC32 __x86_indirect_thunk_rdi-0x4
In this case the relocation addend needs to be adjusted accordingly in
order to find the location of the switch table.
The fix is for case 3 (as described in the comments), but also make the
existing case 1 & 2 checks more precise by only adjusting the addend for
R_X86_64_PC32 relocations.
This fixes the following warnings:
drivers/video/fbdev/omap2/omapfb/dss/dispc.o: warning: objtool: dispc_runtime_suspend()+0xbb8: sibling call from callable instruction with modified stack frame
drivers/video/fbdev/omap2/omapfb/dss/dispc.o: warning: objtool: dispc_runtime_resume()+0xcc5: sibling call from callable instruction with modified stack frame
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/b6098294fd67afb69af8c47c9883d7a68bf0f8ea.1526305958.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd35c88b74 upstream.
With GCC 8, some issues were found with the objtool switch table
detection.
1) In the .rodata section, immediately after the switch table, there can
be another object which contains a pointer to the function which had
the switch statement. In this case objtool wrongly considers the
function pointer to be part of the switch table. Fix it by:
a) making sure there are no pointers to the beginning of the
function; and
b) making sure there are no gaps in the switch table.
Only the former was needed, the latter adds additional protection for
future optimizations.
2) In find_switch_table(), case 1 and case 2 are missing the check to
ensure that the .rodata switch table data is anonymous, i.e. that it
isn't already associated with an ELF symbol. Fix it by adding the
same find_symbol_containing() check which is used for case 3.
This fixes the following warnings with GCC 8:
drivers/block/virtio_blk.o: warning: objtool: virtio_queue_rq()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+72
net/ipv6/icmp.o: warning: objtool: icmpv6_rcv()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+64
drivers/usb/core/quirks.o: warning: objtool: quirks_param_set()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+48
drivers/mtd/nand/raw/nand_hynix.o: warning: objtool: hynix_nand_decode_id()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+24
drivers/mtd/nand/raw/nand_samsung.o: warning: objtool: samsung_nand_decode_id()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+32
drivers/gpu/drm/nouveau/nvkm/subdev/top/gk104.o: warning: objtool: gk104_top_oneinit()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+64
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: damian <damian.tometzki@icloud.com>
Link: http://lkml.kernel.org/r/20180510224849.xwi34d6tzheb5wgw@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 13810435b9 upstream.
GCC 8 moves a lot of unlikely code out of line to "cold" subfunctions in
.text.unlikely. Properly detect the new subfunctions and treat them as
extensions of the original functions.
This fixes a bunch of warnings like:
kernel/cgroup/cgroup.o: warning: objtool: parse_cgroup_root_flags()+0x33: sibling call from callable instruction with modified stack frame
kernel/cgroup/cgroup.o: warning: objtool: cgroup_addrm_files()+0x290: sibling call from callable instruction with modified stack frame
kernel/cgroup/cgroup.o: warning: objtool: cgroup_apply_control_enable()+0x25b: sibling call from callable instruction with modified stack frame
kernel/cgroup/cgroup.o: warning: objtool: rebind_subsystems()+0x325: sibling call from callable instruction with modified stack frame
Reported-and-tested-by: damian <damian.tometzki@icloud.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/0965e7fcfc5f31a276f0c7f298ff770c19b68706.1525923412.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
perf wants matching .h files otherwise it complains during the build
process. As these files have been modified over the past few 4.14.y
releases, they are out of sync, so fix that problem by properly copying
the respective versions to the tools/ mirror copies.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e3ebaa4651 ]
Jin Yao reported memory corrupton in perf report with
branch info used for stack trace:
> Following command lines will cause perf crash.
> perf record -j call -g -a <application>
> perf report --branch-history
>
> *** Error in `perf': double free or corruption (!prev): 0x00000000104aa040 ***
> ======= Backtrace: =========
> /lib/x86_64-linux-gnu/libc.so.6(+0x77725)[0x7f6b37254725]
> /lib/x86_64-linux-gnu/libc.so.6(+0x7ff4a)[0x7f6b3725cf4a]
> /lib/x86_64-linux-gnu/libc.so.6(cfree+0x4c)[0x7f6b37260abc]
> perf[0x51b914]
> perf(hist_entry_iter__add+0x1e5)[0x51f305]
> perf[0x43cf01]
> perf[0x4fa3bf]
> perf[0x4fa923]
> perf[0x4fd396]
> perf[0x4f9614]
> perf(perf_session__process_events+0x89e)[0x4fc38e]
> perf(cmd_report+0x15d2)[0x43f202]
> perf[0x4a059f]
> perf(main+0x631)[0x427b71]
> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf0)[0x7f6b371fd830]
> perf(_start+0x29)[0x427d89]
For the cumulative output, we allocate the he_cache array based on the
--max-stack option value and populate it with data from 'callchain_cursor'.
The --max-stack option value does not ensure now the limit for number of
callchain_cursor nodes, so the cumulative iter code will allocate smaller array
than it's actually needed and cause above corruption.
I think the --max-stack limit does not apply here anyway, because we add
callchain data as normal hist entries, while the --max-stack control the limit
of single entry callchain depth.
Using the callchain_cursor.nr as he_cache array count to fix this. Also
removing struct hist_entry_iter::max_stack, because there's no longer any use
for it.
We need more fixes to ensure that the branch stack code follows properly the
logic of --max-stack, which is not the case at the moment.
Original-patch-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reported-by: Jin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180216123619.GA9945@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ab6e9a9934 ]
The symbol search called by machine__find_kernel_symbol_by_name is using
internally arch__compare_symbol_names function to compare 2 symbol
names, because different archs have different ways of comparing symbols.
Mostly for skipping '.' prefixes and similar.
In test 1 when we try to find matching symbols in kallsyms and vmlinux,
by address and by symbol name. When either is found we compare the pair
symbol names by simple strcmp, which is not good enough for reasons
explained in previous paragraph.
On powerpc this can cause lockup, because even thought we found the
pair, the compared names are different and don't match simple strcmp.
Following code path is executed, that leads to lockup:
- we find the pair in kallsyms by sym->start
next_pair:
- we compare the names and it fails
- we find the pair by sym->name
- the pair addresses match so we call goto next_pair
because we assume the names match in this case
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 031b84c407 ("perf probe ppc: Enable matching against dot symbols automatically")
Link: http://lkml.kernel.org/r/20180215122635.24029-10-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b40982e846 ]
When we use perf report interactive annotate view, we can see
the position of jump arrow is not correct. For example,
1. perf record -b ...
2. perf report
3. In interactive mode, select Annotate 'function'
Percent│ IPC Cycle
│ if (flag)
1.37 │0.4┌── 1 ↓ je 82
│ │ x += x / y + y / x;
0.00 │0.4│ 1310 movsd (%rsp),%xmm0
0.00 │0.4│ 565 movsd 0x8(%rsp),%xmm4
│0.4│ movsd 0x8(%rsp),%xmm1
│0.4│ movsd (%rsp),%xmm3
│0.4│ divsd %xmm4,%xmm0
0.00 │0.4│ 579 divsd %xmm3,%xmm1
│0.4│ movsd (%rsp),%xmm2
│0.4│ addsd %xmm1,%xmm0
│0.4│ addsd %xmm2,%xmm0
0.00 │0.4│ movsd %xmm0,(%rsp)
│ │ volatile double x = 1212121212, y = 121212;
│ │
│ │ s_randseed = time(0);
│ │ srand(s_randseed);
│ │
│ │ for (i = 0; i < 2000000000; i++) {
1.37 │0.4└─→ 82: sub $0x1,%ebx
28.21 │0.48 17 ↑ jne 38
The jump arrow in above example is not correct. It should add the
width of IPC and Cycle.
With this patch, the result is:
Percent│ IPC Cycle
│ if (flag)
1.37 │0.48 1 ┌──je 82
│ │ x += x / y + y / x;
0.00 │0.48 1310 │ movsd (%rsp),%xmm0
0.00 │0.48 565 │ movsd 0x8(%rsp),%xmm4
│0.48 │ movsd 0x8(%rsp),%xmm1
│0.48 │ movsd (%rsp),%xmm3
│0.48 │ divsd %xmm4,%xmm0
0.00 │0.48 579 │ divsd %xmm3,%xmm1
│0.48 │ movsd (%rsp),%xmm2
│0.48 │ addsd %xmm1,%xmm0
│0.48 │ addsd %xmm2,%xmm0
0.00 │0.48 │ movsd %xmm0,(%rsp)
│ │ volatile double x = 1212121212, y = 121212;
│ │
│ │ s_randseed = time(0);
│ │ srand(s_randseed);
│ │
│ │ for (i = 0; i < 2000000000; i++) {
1.37 │0.48 82:└─→sub $0x1,%ebx
28.21 │0.48 17 ↑ jne 38
Committer notes:
Please note that only from LBRv5 (according to Jiri) onwards, i.e. >=
Skylake is that we'll have the cycles counts in each branch record
entry, so to see the Cycles and IPC columns, and be able to test this
patch, one need a capable hardware.
While applying this I first tested it on a Broadwell class machine and
couldn't get those columns, will add code to the annotate browser to
warn the user about that, i.e. you have branch records, but no cycles,
use a more recent hardware to get the cycles and IPC columns.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1517223473-14750-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0f19a038af ]
Using Fedora 27 and latest Linux kernel the test case
trace+probe_libc_inet_pton.sh fails again on s390. This time is the
inlining of functions which does not match. After an update of the
glibc (from 2.26-16 to 2.26-24) the output is different
The expected output is:
__inet_pton (/usr/lib64/libc-2.26.so)
gaih_inet (inlined)
....
The actual output is:
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.061/0.061/0.061/0.000 ms
0.000 probe_libc:inet_pton:(3ffb2140448))
__inet_pton (inlined)
gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
...
Fix this by being less strict on 'inlined' verses library name and
accept both
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180214070303.55757-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Woodhouse