Downgrade the "msg lost in rx" message to debug level, to prevent
flooding the kernel log with error messages.
Fixes: e0d1f4816f2a ("can: m_can: add Bosch M_CAN controller support")
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20250711-mcan_ratelimit-v3-1-7413e8e21b84@geanix.com
[mkl: enhance commit message]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In the buffer write path, iomap_set_range_uptodate() is called every
time iomap_end_write() is called. But if folio_test_uptodate() holds, we
know that all blocks in this folio are already in the uptodate state, so
there is no need to go deep into the critical section of state_lock to
execute bitmap_set().
This is because the folios always creep towards ifs_is_fully_uptodate()
state and once they've gotten there folio_mark_uptodate() is called, which
means the folio is uptodate.
Then once a folio is uptodate, there is no route back to !uptodate without
going through the removal of the folio from the page cache. Therefore, it's
fine to use folio_test_uptodate() to short-circuit unnecessary code paths.
Although state_lock may not have significant lock contention due to
folio lock, this patch at least reduces the number of instructions,
especially the expensive lock-prefixed instructions.
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Link: https://lore.kernel.org/20250711081207.1782667-1-alexjlzheng@tencent.com
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
- Clear LMTT page to avoid leaking data from one VF to another
- Align PF queue size to power of 2
- Disable Indirect Ring State to avoid intermittent issues on context
switch: feature is not currently needed, so can be disabled for now.
- Fix compression handling when the BO pages are very fragmented
- Restore display pm on error path
- Fix runtime pm handling in xe devcoredump
- Fix xe_pm_set_vram_threshold() doc
- Recommend new minor versions of GuC firmware
- Drop some workarounds on VF
- Do not use verbose GuC logging by default: it should be only for
debugging
-----BEGIN PGP SIGNATURE-----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=HUb3
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-fixes-2025-07-11' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Clear LMTT page to avoid leaking data from one VF to another
- Align PF queue size to power of 2
- Disable Indirect Ring State to avoid intermittent issues on context
switch: feature is not currently needed, so can be disabled for now.
- Fix compression handling when the BO pages are very fragmented
- Restore display pm on error path
- Fix runtime pm handling in xe devcoredump
- Fix xe_pm_set_vram_threshold() doc
- Recommend new minor versions of GuC firmware
- Drop some workarounds on VF
- Do not use verbose GuC logging by default: it should be only for
debugging
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/s6jyd24mimbzb4vxtgc5vupvbyqplfep2c6eupue7znnlbhuxy@lmvzexfzhrnn
- Keep LDO5 always on for imx8mm-verdin to fix broken Ethernet support
- Add big-endian property back for LS1046A watchdog, as the removal was
an accident
- Fix DMA interrupter number of i.MX95 pcie0_ep device
- A set of changes from Tim Harvey to fix TPM SPI frequency on
imx8mp-venice devices
- A couple of changes from Wei Fang to fix NETC overshoot issue on
i.MX95 EVK boards
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmhszHQACgkQUFdYWoew
fM6P8AgAg+KL/YtgmWxU+/YBJz2wxWxIcWLsn82PuOe61rHfUemOuN2T96576dTh
SbAjv9k3qO/aguTnZ5mWbccmcZ4zoSwGjHHf/Ag1C+V8THEyohYa+408z3GBaMXg
q2H+rJ587lpBU6y+kLlARvqfTII9It7jy8jAojx16gKBM0/FAA52XTEYLUtqcdzS
jcJmqT+2pg8RfIsfHK7PEIZ6uRSixCiOsfd7V5QjRwD18gBhifMGk8n5zB0Yd5H3
vXEATM1Kmldqqc3HkWrLAqucbiYw5cLOCyG9e0KKgspwytZZ3BlBS6PeW2+C/mm+
p19fIEz84EhOM7eOcn3ve7D2gHuCmw==
=VVCu
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=EUCo
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.16:
- Keep LDO5 always on for imx8mm-verdin to fix broken Ethernet support
- Add big-endian property back for LS1046A watchdog, as the removal was
an accident
- Fix DMA interrupter number of i.MX95 pcie0_ep device
- A set of changes from Tim Harvey to fix TPM SPI frequency on
imx8mp-venice devices
- A couple of changes from Wei Fang to fix NETC overshoot issue on
i.MX95 EVK boards
* tag 'imx-fixes-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: freescale: imx8mm-verdin: Keep LDO5 always on
arm64: dts: imx95: Correct the DMA interrupter number of pcie0_ep
arm64: dts: add big-endian property back into watchdog node
arm64: dts: imx95-15x15-evk: fix the overshoot issue of NETC
arm64: dts: imx95-19x19-evk: fix the overshoot issue of NETC
arm64: dts: imx8mp-venice-gw74xx: fix TPM SPI frequency
arm64: dts: imx8mp-venice-gw73xx: fix TPM SPI frequency
arm64: dts: imx8mp-venice-gw72xx: fix TPM SPI frequency
arm64: dts: imx8mp-venice-gw71xx: fix TPM SPI frequency
Link: https://lore.kernel.org/r/aGzNeZ7KtsRsUkZT@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Nandor's address has been bouncing for some time now. Remove it from
MAINTAINERS. The affected driver falls under the wider umbrella of GPIO
modules.
Link: https://lore.kernel.org/r/20250709071825.16212-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Currently xe sets the guc log level to a verbose level since it's useful
to debug hangs and general development. However the verbose level may
already be too much and affect performance.
Michal Mrozek did some tests with the L0 compute stack for submission
latency with ULLS disabled. Below are the normalized numbers with log
level 3 (the current default) as baseline for each test:
Test \ Log Level 3 0 1 2
----------------------------------------------------------- ------ ------ ------ ------
BestWalkerNthCommandListSubmission(CmdListCount=2) 1.00 0.63 0.63 0.96
BestWalkerNthSubmission(KernelCount=2) 1.00 0.62 0.63 0.96
BestWalkerNthSubmissionImmediate(KernelCount=2) 1.00 0.58 0.58 0.85
BestWalkerSubmission 1.00 0.62 0.62 0.96
BestWalkerSubmissionImmediate 1.00 0.63 0.62 0.96
BestWalkerSubmissionImmediateMultiCmdlists(cmdlistCount=2) 1.00 0.58 0.58 0.86
BestWalkerSubmissionImmediateMultiCmdlists(cmdlistCount=4) 1.00 0.70 0.70 0.83
BestWalkerSubmissionImmediateMultiCmdlists(cmdlistCount=8) 1.00 0.53 0.52 0.78
Log level 2 is the first "verbose level" for GuC, where the biggest
difference happens. Keep log level 3 for CONFIG_DRM_XE_DEBUG, but switch
to 1, i.e. GUC_LOG_LEVEL_NON_VERBOSE, for "normal" builds.
Cc: Michal Mrozek <michal.mrozek@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250613-guc-log-level-v2-1-cb84a63e49fe@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit a37128ba613ad6a5f81f382fa3cfe5c4a6527310)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
These workarounds are not applicable for use by the VFs.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Tested-by: Jakub Kolakowski <jakub1.kolakowski@intel.com>
Reviewed-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Signed-off-by: Jakub Kolakowski <jakub1.kolakowski@intel.com>
Link: https://lore.kernel.org/r/20250710103040.375610-2-jakub1.kolakowski@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 1d2e2503e506ddc499cbb7afdc8b70bcf6fe241f)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The parameter threshold is with size in MiB, not in bits.
Correct it to avoid any confusion.
v2: s/mb/MiB, s/vram/VRAM, fix return section. (Michal)
Fixes: 30c399529f4c ("drm/xe: Document Xe PM component")
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://lore.kernel.org/r/20250708021450.3602087-2-shuicheng.lin@intel.com
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 0efec0500117947f924e5ac83be40f96378af85a)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
xe_pm_runtime_put() is missed to be called for the error path in
xe_devcoredump_read().
Add function description comments for xe_devcoredump_read() to help
understand it.
v2: more detail function comments and refine goto logic (Matt)
Fixes: c4a2e5f865b7 ("drm/xe: Add devcoredump chunking")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250707004911.3502904-6-shuicheng.lin@intel.com
(cherry picked from commit 017ef1228d735965419ff118fe1b89089e772c42)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
xe_bo_evict_all() is called after xe_display_pm_suspend(). So if there
is error with xe_bo_evict_all(), display pm should be restored.
Fixes: 51462211f4a9 ("drm/xe/pxp: add PXP PM support")
Fixes: cb8f81c17531 ("drm/xe/display: Make display suspend/resume work on discrete")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://lore.kernel.org/r/20250708035424.3608190-2-shuicheng.lin@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 83dcee17855c4e5af037ae3262809036de127903)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
I got the following warning when writing other tests:
+ handle_test_result_pass 'bond 802.3ad' '(lacp_active off)'
+ local 'test_name=bond 802.3ad'
+ shift
+ local 'opt_str=(lacp_active off)'
+ shift
+ log_test_result 'bond 802.3ad' '(lacp_active off)' ' OK '
+ local 'test_name=bond 802.3ad'
+ shift
+ local 'opt_str=(lacp_active off)'
+ shift
+ local 'result= OK '
+ shift
+ local retmsg=
+ shift
/net/tools/testing/selftests/net/forwarding/../lib.sh: line 315: shift: shift count out of range
This happens because an extra shift is executed even after all arguments
have been consumed. Remove the last shift in log_test_result() to avoid
this warning.
Fixes: a923af1ceee7 ("selftests: forwarding: Convert log_test() to recognize RET values")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250709091244.88395-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Guillaume Nault says:
====================
gre: Fix default IPv6 multicast route creation.
When fixing IPv6 link-local address generation on GRE devices with
commit 3e6a0243ff00 ("gre: Fix again IPv6 link-local address
generation."), I accidentally broke the default IPv6 multicast route
creation on these GRE devices.
Fix that in patch 1, making the GRE specific code yet a bit closer to
the generic code used by most other network interface types.
Then extend the selftest in patch 2 to cover this case.
====================
Link: https://patch.msgid.link/cover.1752070620.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The previous patch fixes a bug that prevented the creation of the
default IPv6 multicast route (ff00::/8) for some GRE devices. Now let's
extend the GRE IPv6 selftests to cover this case.
Also, rename check_ipv6_ll_addr() to check_ipv6_device_config() and
adapt comments and script output to take into account the fact that
we're not limited to link-local address generation.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/65a89583bde3bf866a1922c2e5158e4d72c520e2.1752070620.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use addrconf_add_dev() instead of ipv6_find_idev() in
addrconf_gre_config() so that we don't just get the inet6_dev, but also
install the default ff00::/8 multicast route.
Before commit 3e6a0243ff00 ("gre: Fix again IPv6 link-local address
generation."), the multicast route was created at the end of the
function by addrconf_add_mroute(). But this code path is now only taken
in one particular case (gre devices not bound to a local IP address and
in EUI64 mode). For all other cases, the function exits early and
addrconf_add_mroute() is not called anymore.
Using addrconf_add_dev() instead of ipv6_find_idev() in
addrconf_gre_config(), fixes the problem as it will create the default
multicast route for all gre devices. This also brings
addrconf_gre_config() a bit closer to the normal netdevice IPv6
configuration code (addrconf_dev_config()).
Cc: stable@vger.kernel.org
Fixes: 3e6a0243ff00 ("gre: Fix again IPv6 link-local address generation.")
Reported-by: Aiden Yang <ling@moedove.com>
Closes: https://lore.kernel.org/netdev/CANR=AhRM7YHHXVxJ4DmrTNMeuEOY87K2mLmo9KMed1JMr20p6g@mail.gmail.com/
Reviewed-by: Gary Guo <gary@garyguo.net>
Tested-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/027a923dcb550ad115e6d93ee8bb7d310378bd01.1752070620.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oleksij Rempel says:
====================
net: phy: microchip: LAN88xx reliability fixes
This patch series improves the reliability of the Microchip LAN88xx
PHYs, particularly in edge cases involving fixed link configurations or
forced speed modes.
Patch 1 assigns genphy_soft_reset() to the .soft_reset hook to ensure
that stale link partner advertisement (LPA) bits are properly cleared
during reconfiguration. Without this, outdated autonegotiation bits may
remain visible in some parallel detection cases.
Patch 2 restricts the 100 Mbps workaround (originally intended to handle
cable length switching) to only run when the link transitions to the
PHY_NOLINK state. This prevents repeated toggling that can confuse
autonegotiating link partners such as the Intel i350, leading to
unstable link cycles.
Both patches were tested on a LAN7850 (with integrated LAN88xx PHY)
against an Intel I350 NIC. The full test suite - autonegotiation, fixed
link, and parallel detection - passed successfully.
====================
Link: https://patch.msgid.link/20250709130753.3994461-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Restrict the 100Mbit forced-mode workaround to link-down transitions
only, to prevent repeated link reset cycles in certain configurations.
The workaround was originally introduced to improve signal reliability
when switching cables between long and short distances. It temporarily
forces the PHY into 10 Mbps before returning to 100 Mbps.
However, when used with autonegotiating link partners (e.g., Intel i350),
executing this workaround on every link change can confuse the partner
and cause constant renegotiation loops. This results in repeated link
down/up transitions and the PHY never reaching a stable state.
Limit the workaround to only run during the PHY_NOLINK state. This ensures
it is triggered only once per link drop, avoiding disruptive toggling
while still preserving its intended effect.
Note: I am not able to reproduce the original issue that this workaround
addresses. I can only confirm that 100 Mbit mode works correctly in my
test setup. Based on code inspection, I assume the workaround aims to
reset some internal state machine or signal block by toggling speeds.
However, a PHY reset is already performed earlier in the function via
phy_init_hw(), which may achieve a similar effect. Without a reproducer,
I conservatively keep the workaround but restrict its conditions.
Fixes: e57cf3639c32 ("net: lan78xx: fix accessing the LAN7800's internal phy specific registers from the MAC driver")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250709130753.3994461-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable .soft_reset for the LAN88xx PHY driver by assigning
genphy_soft_reset() to ensure that the phylib core performs a proper
soft reset during reconfiguration.
Previously, the driver left .soft_reset unimplemented, so calls to
phy_init_hw() (e.g., from lan88xx_link_change_notify()) did not fully
reset the PHY. As a result, stale contents in the Link Partner Ability
(LPA) register could persist, causing the PHY to incorrectly report
that the link partner advertised autonegotiation even when it did not.
Using genphy_soft_reset() guarantees a clean reset of the PHY and
corrects the false autoneg reporting in these scenarios.
Fixes: ccb989e4d1ef ("net: phy: microchip: Reset LAN88xx PHY to ensure clean link state on LAN7800/7850")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250709130753.3994461-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The previous hardcoded definitions of NUM_RX_STATS and
NUM_TX_STATS were not updated when new fields were added
to the ibmvnic_{rx,tx}_queue_stats structures. Specifically,
commit 2ee73c54a615 ("ibmvnic: Add stat for tx direct vs tx
batched") added a fourth TX stat, but NUM_TX_STATS remained 3,
leading to a mismatch.
This patch replaces the static defines with dynamic sizeof-based
calculations to ensure the stat arrays are correctly sized.
This fixes incorrect indexing and prevents incomplete stat
reporting in tools like ethtool.
Fixes: 2ee73c54a615 ("ibmvnic: Add stat for tx direct vs tx batched")
Signed-off-by: Mingming Cao <mmc@linux.ibm.com>
Reviewed-by: Dave Marquardt <davemarq@linux.ibm.com>
Reviewed-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250709153332.73892-1-mmc@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When updating an existing route entry in atrtr_create(), the old device
reference was not being released before assigning the new device,
leading to a device refcount leak. Fix this by calling dev_put() to
release the old device reference before holding the new one.
Fixes: c7f905f0f6d4 ("[ATALK]: Add missing dev_hold() to atrtr_create().")
Signed-off-by: Kito Xu <veritas501@foxmail.com>
Link: https://patch.msgid.link/tencent_E1A26771CDAB389A0396D1681A90A49E5D09@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The armada-370-xp irqchip fails in some randconfig builds because
of a missing declaration:
In file included from drivers/irqchip/irq-armada-370-xp.c:23:
include/linux/irqchip/irq-msi-lib.h:25:39: error: 'struct msi_domain_info' declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
Add a forward declaration for the msi_domain_info structure.
[ tglx: Fixed up the subsystem prefix. Is it really that hard to get right? ]
Fixes: e51b27438a10 ("irqchip: Make irq-msi-lib.h globally available")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/all/20250710080021.2303640-1-arnd@kernel.org
pci_msix_write_tph_tag() takes the per device MSI descriptor mutex and then
invokes msi_domain_get_virq(), which takes the same mutex again. That
obviously results in a system hang which is exposed by a softlockup or
lockdep warning.
Move the lock guard after the invocation of msi_domain_get_virq() to fix
this.
[ tglx: Massage changelog by adding a proper explanation and removing the
not really useful stacktrace ]
Fixes: d5124a9957b2 ("PCI/MSI: Provide a sane mechanism for TPH")
Reported-by: Jorge Lopez <jorge.jo.lopez@oracle.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jorge Lopez <jorge.jo.lopez@oracle.com>
Link: https://lore.kernel.org/all/20250708222530.1041477-1-himanshu.madhani@oracle.com
Current release - regressions:
- tcp: refine sk_rcvbuf increase for ooo packets
- bluetooth: fix attempting to send HCI_Disconnect to BIS handle
- rxrpc: fix over large frame size warning
- eth: bcmgenet: initialize u64 stats seq counter
Previous releases - regressions:
- tcp: correct signedness in skb remaining space calculation
- sched: abort __tc_modify_qdisc if parent class does not exist
- vsock: fix transport_{g2h,h2g} TOCTOU
- rxrpc: fix bug due to prealloc collision
- tipc: fix use-after-free in tipc_conn_close().
- bluetooth: fix not marking Broadcast Sink BIS as connected
- phy: qca808x: fix WoL issue by utilizing at8031_set_wol()
- eth: am65-cpsw-nuss: fix skb size by accounting for skb_shared_info
Previous releases - always broken:
- netlink: fix wraparounds of sk->sk_rmem_alloc.
- atm: fix infinite recursive call of clip_push().
- eth: stmmac: fix interrupt handling for level-triggered mode in DWC_XGMAC2
- eth: rtsn: fix a null pointer dereference in rtsn_probe()
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=GD9v
-----END PGP SIGNATURE-----
Merge tag 'net-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Bluetooth.
Current release - regressions:
- tcp: refine sk_rcvbuf increase for ooo packets
- bluetooth: fix attempting to send HCI_Disconnect to BIS handle
- rxrpc: fix over large frame size warning
- eth: bcmgenet: initialize u64 stats seq counter
Previous releases - regressions:
- tcp: correct signedness in skb remaining space calculation
- sched: abort __tc_modify_qdisc if parent class does not exist
- vsock: fix transport_{g2h,h2g} TOCTOU
- rxrpc: fix bug due to prealloc collision
- tipc: fix use-after-free in tipc_conn_close().
- bluetooth: fix not marking Broadcast Sink BIS as connected
- phy: qca808x: fix WoL issue by utilizing at8031_set_wol()
- eth: am65-cpsw-nuss: fix skb size by accounting for skb_shared_info
Previous releases - always broken:
- netlink: fix wraparounds of sk->sk_rmem_alloc.
- atm: fix infinite recursive call of clip_push().
- eth:
- stmmac: fix interrupt handling for level-triggered mode in DWC_XGMAC2
- rtsn: fix a null pointer dereference in rtsn_probe()"
* tag 'net-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits)
net/sched: sch_qfq: Fix null-deref in agg_dequeue
rxrpc: Fix oops due to non-existence of prealloc backlog struct
rxrpc: Fix bug due to prealloc collision
MAINTAINERS: remove myself as netronome maintainer
selftests/net: packetdrill: add tcp_ooo-before-and-after-accept.pkt
tcp: refine sk_rcvbuf increase for ooo packets
net/sched: Abort __tc_modify_qdisc if parent class does not exist
net: ethernet: ti: am65-cpsw-nuss: Fix skb size by accounting for skb_shared_info
net: thunderx: avoid direct MTU assignment after WRITE_ONCE()
selftests/tc-testing: Create test case for UAF scenario with DRR/NETEM/BLACKHOLE chain
atm: clip: Fix NULL pointer dereference in vcc_sendmsg()
atm: clip: Fix infinite recursive call of clip_push().
atm: clip: Fix memory leak of struct clip_vcc.
atm: clip: Fix potential null-ptr-deref in to_atmarpd().
net: phy: smsc: Fix link failure in forced mode with Auto-MDIX
net: phy: smsc: Force predictable MDI-X state on LAN87xx
net: phy: smsc: Fix Auto-MDIX configuration when disabled by strap
net: stmmac: Fix interrupt handling for level-triggered mode in DWC_XGMAC2
rxrpc: Fix over large frame size warning
net: airoha: Fix an error handling path in airoha_probe()
...
- Remove the last leftovers of the ill-fated FPSIMD host state
mapping at EL2 stage-1
- Fix unexpected advertisement to the guest of unimplemented S2 base
granule sizes
- Gracefully fail initialising pKVM if the interrupt controller isn't
GICv3
- Also gracefully fail initialising pKVM if the carveout allocation
fails
- Fix the computing of the minimum MMIO range required for the host on
stage-2 fault
- Fix the generation of the GICv3 Maintenance Interrupt in nested mode
x86:
- Reject SEV{-ES} intra-host migration if one or more vCPUs are actively
being created, so as not to create a non-SEV{-ES} vCPU in an SEV{-ES} VM.
- Use a pre-allocated, per-vCPU buffer for handling de-sparsification of
vCPU masks in Hyper-V hypercalls; fixes a "stack frame too large" issue.
- Allow out-of-range/invalid Xen event channel ports when configuring IRQ
routing, to avoid dictating a specific ioctl() ordering to userspace.
- Conditionally reschedule when setting memory attributes to avoid soft
lockups when userspace converts huge swaths of memory to/from private.
- Add back MWAIT as a required feature for the MONITOR/MWAIT selftest.
- Add a missing field in struct sev_data_snp_launch_start that resulted in
the guest-visible workarounds field being filled at the wrong offset.
- Skip non-canonical address when processing Hyper-V PV TLB flushes to avoid
VM-Fail on INVVPID.
- Advertise supported TDX TDVMCALLs to userspace.
- Pass SetupEventNotifyInterrupt arguments to userspace.
- Fix TSC frequency underflow.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmhurKgUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNxHggApTP4vw+oOzfN7UoNmgR9XZMI1p2a
R8AzQ1zDyVbEVWq3xTKvXtld+dKeO0yKB/XeI/1JLck1OiHxY57I3X6k5AnsurEr
CBzeAhAjXivF8woMgmlP+30aqpomcPACdQm0gRnWkRDDJfXqSUas/iE/s9Ct1dT4
4w3PtFLsSsU8vX/RttR+CqF1AQ6SeV/NRvA8hzPGMGZoQ2um74j4ZsM/3xh77Kdw
Z2vOnZOIA4dk0074JjO/Yb9l00Ib4hn+MWG5jVJ+6i2HRRYd2knnB29apVS/ARdL
X20j+LvtYj/jrPPdYwqjvxbIXyLbJrLCZyjKhfueN+rnisPNvzR+7YE4ZQ==
=NduO
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Many patches, pretty much all of them small, that accumulated while I
was on vacation.
ARM:
- Remove the last leftovers of the ill-fated FPSIMD host state
mapping at EL2 stage-1
- Fix unexpected advertisement to the guest of unimplemented S2 base
granule sizes
- Gracefully fail initialising pKVM if the interrupt controller isn't
GICv3
- Also gracefully fail initialising pKVM if the carveout allocation
fails
- Fix the computing of the minimum MMIO range required for the host
on stage-2 fault
- Fix the generation of the GICv3 Maintenance Interrupt in nested
mode
x86:
- Reject SEV{-ES} intra-host migration if one or more vCPUs are
actively being created, so as not to create a non-SEV{-ES} vCPU in
an SEV{-ES} VM
- Use a pre-allocated, per-vCPU buffer for handling de-sparsification
of vCPU masks in Hyper-V hypercalls; fixes a "stack frame too
large" issue
- Allow out-of-range/invalid Xen event channel ports when configuring
IRQ routing, to avoid dictating a specific ioctl() ordering to
userspace
- Conditionally reschedule when setting memory attributes to avoid
soft lockups when userspace converts huge swaths of memory to/from
private
- Add back MWAIT as a required feature for the MONITOR/MWAIT selftest
- Add a missing field in struct sev_data_snp_launch_start that
resulted in the guest-visible workarounds field being filled at the
wrong offset
- Skip non-canonical address when processing Hyper-V PV TLB flushes
to avoid VM-Fail on INVVPID
- Advertise supported TDX TDVMCALLs to userspace
- Pass SetupEventNotifyInterrupt arguments to userspace
- Fix TSC frequency underflow"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: avoid underflow when scaling TSC frequency
KVM: arm64: Remove kvm_arch_vcpu_run_map_fp()
KVM: arm64: Fix handling of FEAT_GTG for unimplemented granule sizes
KVM: arm64: Don't free hyp pages with pKVM on GICv2
KVM: arm64: Fix error path in init_hyp_mode()
KVM: arm64: Adjust range correctly during host stage-2 faults
KVM: arm64: nv: Fix MI line level calculation in vgic_v3_nested_update_mi()
KVM: x86/hyper-v: Skip non-canonical addresses during PV TLB flush
KVM: SVM: Add missing member in SNP_LAUNCH_START command structure
Documentation: KVM: Fix unexpected unindent warnings
KVM: selftests: Add back the missing check of MONITOR/MWAIT availability
KVM: Allow CPU to reschedule while setting per-page memory attributes
KVM: x86/xen: Allow 'out of range' event channel ports in IRQ routing table.
KVM: x86/hyper-v: Use preallocated per-vCPU buffer for de-sparsified vCPU masks
KVM: SVM: Initialize vmsa_pa in VMCB to INVALID_PAGE if VMSA page is NULL
KVM: SVM: Reject SEV{-ES} intra host migration if vCPU creation is in-flight
KVM: TDX: Report supported optional TDVMCALLs in TDX capabilities
KVM: TDX: Exit to userspace for SetupEventNotifyInterrupt
It turns out that the fixup from vlv_fixup_mipi_sequences() is necessary
for some DSI panel's with version 2 mipi-sequences too.
Specifically the Acer Iconia One 8 A1-840 (not to be confused with the
A1-840FHD which is different) has the following sequences:
BDB block 53 (1284 bytes) - MIPI sequence block:
Sequence block version v2
Panel 0 *
Sequence 2 - MIPI_SEQ_INIT_OTP
GPIO index 9, source 0, set 0 (0x00)
Delay: 50000 us
GPIO index 9, source 0, set 1 (0x01)
Delay: 6000 us
GPIO index 9, source 0, set 0 (0x00)
Delay: 6000 us
GPIO index 9, source 0, set 1 (0x01)
Delay: 25000 us
Send DCS: Port A, VC 0, LP, Type 39, Length 5, Data ff aa 55 a5 80
Send DCS: Port A, VC 0, LP, Type 39, Length 3, Data 6f 11 00
...
Send DCS: Port A, VC 0, LP, Type 05, Length 1, Data 29
Delay: 120000 us
Sequence 4 - MIPI_SEQ_DISPLAY_OFF
Send DCS: Port A, VC 0, LP, Type 05, Length 1, Data 28
Delay: 105000 us
Send DCS: Port A, VC 0, LP, Type 05, Length 2, Data 10 00
Delay: 10000 us
Sequence 5 - MIPI_SEQ_ASSERT_RESET
Delay: 10000 us
GPIO index 9, source 0, set 0 (0x00)
Notice how there is no MIPI_SEQ_DEASSERT_RESET, instead the deassert
is done at the beginning of MIPI_SEQ_INIT_OTP, which is exactly what
the fixup from vlv_fixup_mipi_sequences() fixes up.
Extend it to also apply to v2 sequences, this fixes the panel not working
on the Acer Iconia One 8 A1-840.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14605
Signed-off-by: Hans de Goede <hansg@kernel.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250703143824.7121-1-hansg@kernel.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 11895f375939d60efe7ed5dddc1cffe2e79f976c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The mute led on this laptop is using ALC245 but requires a quirk to work
This patch enables the existing quirk for the device.
Tested on Victus 16-r0xxx Laptop. The LED behaviour works
as intended.
Cc: <stable@vger.kernel.org>
Signed-off-by: Edip Hazuri <edip@medip.dev>
Link: https://patch.msgid.link/20250710131812.27509-1-edip@medip.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
NDI (Northern Digital Inc.) is introducing a new product called the
EMGUIDE GEMINI that will use an FTDI chip for USB serial communications.
Add the NDI EMGUIDE GEMINI product ID that uses the NDI Vendor ID
rather than the FTDI Vendor ID, unlike older products.
Signed-off-by: Ryan Mann <rmann@ndigital.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
In reconfig we add the virtual monitor in 2 cases:
1. If we are resuming (it was deleted on suspend)
2. If it was added after an error but before the reconfig
(due to the last non-monitor interface removal).
In the second case, the removal of the non-monitor interface will succeed
but the addition of the virtual monitor will fail, so we add it in the
reconfig.
The problem is that we mislead the driver to think that this is an existing
interface that is getting re-added - while it is actually a completely new
interface from the drivers' point of view.
Some drivers act differently when a interface is re-added. For example, it
might not initialize things because they were already initialized.
Such drivers will - in this case - be left with a partialy initialized vif.
To fix it, add the virtual monitor after reconfig_complete, so the
driver will know that this is a completely new interface.
Fixes: 3c3e21e7443b ("mac80211: destroy virtual monitor interface across suspend")
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709233451.648d39b041e8.I2e37b68375278987e303d6c00cc5f3d8334d2f96@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is currently not initialized for a virtual monitor, leading to a
NULL pointer dereference when - for example - iterating over all the
keys of all the vifs.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709233400.8dcefe578497.I4c90a00ae3256520e063199d7f6f2580d5451acf@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
BTN_WHEEL is duplicated (by value) and compiler is not happy about that:
drivers/hid/hid-debug.c:3302:16: error: initializer overrides prior initialization of this subobject [-Werror,-Winitializer-overrides]
3302 | [BTN_WHEEL] = "BtnWheel", [KEY_OK] = "Ok",
| ^~~~~~~~~~
drivers/hid/hid-debug.c:3301:20: note: previous initialization is here
3301 | [BTN_GEAR_DOWN] = "BtnGearDown", [BTN_GEAR_UP] = "BtnGearUp",
| ^~~~~~~~~~~~~
Remove it again, as the commit 7b2daa648eb7 ("HID: debug: Remove duplicates
from 'keys'") already did this once in the past.
Fixes: 194808a1ea39 ("HID: Fix debug name for BTN_GEAR_DOWN, BTN_GEAR_UP, BTN_WHEEL")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250710094120.753358-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Two patches here, one quirk for an AMD system and a fix for an issue on
remove of the AVS driver.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmhvf0AACgkQJNaLcl1U
h9BVfgf/VP/sVlMY+hiGvCT80Kj/nGsc/mdjWLLuCCHYpadyPUP8xJQTh/B/4w/x
737pRbcQo1jlPVEani9/FDmtqtNRL/wg3g8mgSvyVaui5AXL3LZD8zxk7bobFTwz
S+LhDQCZlN0tcn24qitsRe7U1uJcQ4WllApgHrlcsKWKONZydOjzKRv2d6wt5kY6
mEOQTN8fY5Fvqia5psZxwA7WtZTYQyS7Q6o+83ncE2Rf00KM9X2bdoYtZ5ZsAtG0
whve+VwXMq2MBpCzdEAb/CCATQ0SAXSlSKHyKAKi1C8lFuWeciNk4AAMmffaukn/
kIPs75PvczIHuTIc7OBgxBiWNF1bMg==
=dXN7
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.16-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.16
Two patches here, one quirk for an AMD system and a fix for an issue on
remove of the AVS driver.
Before each I2C transfer using DMA, the I2C buffer is DMA'pped to make
sure the memory buffer is DMA'able. This is handle in the function
`stm32_i2c_prep_dma_xfer()`.
If the transfer fails for any reason the I2C buffer must be unmap.
Use the dma_callback to factorize the code and fix this issue.
Note that the `stm32f7_i2c_dma_callback()` is now called in case of DMA
transfer success and error and that the `complete()` on the dma_complete
completion structure is done inconditionnally in case of transfer
success or error as well as the `dmaengine_terminate_async()`.
This is allowed as a `complete()` in case transfer error has no effect
as well as a `dmaengine_terminate_async()` on a transfer success.
Also fix the unneeded cast and remove not more needed variables.
Fixes: 7ecc8cfde553 ("i2c: i2c-stm32f7: Add DMA support")
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: <stable@vger.kernel.org> # v4.18+
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250704-i2c-upstream-v4-2-84a095a2c728@foss.st.com
If the DMA mapping failed, it produced an error log with the wrong
device name:
"stm32-dma3 40400000.dma-controller: rejecting DMA map of vmalloc memory"
Fix this issue by replacing the dev with the I2C dev.
Fixes: bb8822cbbc53 ("i2c: i2c-stm32: Add generic DMA API")
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: <stable@vger.kernel.org> # v4.18+
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250704-i2c-upstream-v4-1-84a095a2c728@foss.st.com
If an error occurs after pm_runtime_use_autosuspend(), a corresponding
pm_runtime_dont_use_autosuspend() should be called.
In case of error in pm_runtime_resume_and_get(), it is not the case because
the error handling path is wrongly ordered.
Fix it.
Fixes: 780f62974125 ("i2c: omap: fix reference leak when pm_runtime_get_sync fails")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: <stable@vger.kernel.org> # v5.13+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/af8a9b62996bebbaaa7c02986aa2a8325ef11596.1751701715.git.christophe.jaillet@wanadoo.fr
To prevent a potential crash in agg_dequeue (net/sched/sch_qfq.c)
when cl->qdisc->ops->peek(cl->qdisc) returns NULL, we check the return
value before using it, similar to the existing approach in sch_hfsc.c.
To avoid code duplication, the following changes are made:
1. Changed qdisc_warn_nonwc(include/net/pkt_sched.h) into a static
inline function.
2. Moved qdisc_peek_len from net/sched/sch_hfsc.c to
include/net/pkt_sched.h so that sch_qfq can reuse it.
3. Applied qdisc_peek_len in agg_dequeue to avoid crashing.
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://patch.msgid.link/20250705212143.3982664-1-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In a quick slow device, readdir() may loop for long time in large
directory, let's give a chance to allow it to be interrupted by
userspace.
Signed-off-by: Chao Yu <chao@kernel.org>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250710073619.4083422-1-chao@kernel.org
[ Gao Xiang: move cond_resched() to the end of the while loop. ]
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Flush the D-cache before unlocking folios for compressed inodes, as
they are dirtied during decompression.
Avoid calling flush_dcache_folio() on every CPU write, since it's more
like playing whack-a-mole without real benefit.
It has no impact on x86 and arm64/risc-v: on x86, flush_dcache_folio()
is a no-op, and on arm64/risc-v, PG_dcache_clean (PG_arch_1) is clear
for new page cache folios. However, certain ARM boards are affected,
as reported.
Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support")
Closes: https://lore.kernel.org/r/c1e51e16-6cc6-49d0-a63e-4e9ff6c4dd53@pengutronix.de
Closes: https://lore.kernel.org/r/38d43fae-1182-4155-9c5b-ffc7382d9917@siemens.com
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
Tested-by: Stefan Kerkmann <s.kerkmann@pengutronix.de>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250709034614.2780117-2-hsiangkao@linux.alibaba.com
Commit 771c994ea51f ("erofs: convert all uncompressed cases to iomap")
converts to use iomap interface, it removed trace_erofs_readpage()
tracepoint in the meantime, let's add it back.
Fixes: 771c994ea51f ("erofs: convert all uncompressed cases to iomap")
Signed-off-by: Chao Yu <chao@kernel.org>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250708111942.3120926-1-chao@kernel.org
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Commit 771c994ea51f ("erofs: convert all uncompressed cases to iomap")
converts to use iomap interface, it removed trace_erofs_readahead()
tracepoint in the meantime, let's add it back.
Fixes: 771c994ea51f ("erofs: convert all uncompressed cases to iomap")
Signed-off-by: Chao Yu <chao@kernel.org>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250707084832.2725677-1-chao@kernel.org
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
The snd_compr_ioctl() ignores the upper 24 bits of the ioctl command
number and only compares the number of the ioctl command, which can
cause unintended behavior if an application tries to use an unsupprted
command that happens to have the same _IOC_NR() value.
Remove the truncation to the low bits and compare the entire ioctl
command code like every other driver does.
Fixes: b21c60a4edd2 ("ALSA: core: add support for compress_offload")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://patch.msgid.link/20250710063059.2683476-1-arnd@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In __cachefiles_write(), if the return value of the write operation > 0, it
is set to 0. This makes it impossible to distinguish scenarios where a
partial write has occurred, and will affect the outer calling functions:
1) cachefiles_write_complete() will call "term_func" such as
netfs_write_subrequest_terminated(). When "ret" in __cachefiles_write()
is used as the "transferred_or_error" of this function, it can not
distinguish the amount of data written, makes the WARN meaningless.
2) cachefiles_ondemand_fd_write_iter() can only assume all writes were
successful by default when "ret" is 0, and unconditionally return the full
length specified by user space.
Fix it by modifying "ret" to reflect the actual number of bytes written.
Furthermore, returning a value greater than 0 from __cachefiles_write()
does not affect other call paths, such as cachefiles_issue_write() and
fscache_write().
Fixes: 047487c947e8 ("cachefiles: Implement the I/O routines")
Signed-off-by: Zizhi Wo <wozizhi@huawei.com>
Link: https://lore.kernel.org/20250703024418.2809353-1-wozizhi@huaweicloud.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
