When Linux sends out untagged traffic from a port, it will enter the CPU
port without any VLAN tag, even if the port is a member of a vlan
filtering bridge with a PVID egress untagged VLAN.
This makes the CPU port's PVID take effect, and the PVID's VLAN
table entry controls if the packet will be tagged on egress.
Since commit 45e9d59d39 ("net: dsa: b53: do not allow to configure
VLAN 0") we remove bridged ports from VLAN 0 when joining or leaving a
VLAN aware bridge. But we also clear the untagged bit, causing untagged
traffic from the controller to become tagged with VID 0 (and priority
0).
Fix this by not touching the untagged map of VLAN 0. Additionally,
always keep the CPU port as a member, as the untag map is only effective
as long as there is at least one member, and we would remove it when
bridging all ports and leaving no standalone ports.
Since Linux (and the switch) treats VLAN 0 tagged traffic like untagged,
the actual impact of this is rather low, but this also prevented earlier
detection of the issue.
Fixes: 45e9d59d39 ("net: dsa: b53: do not allow to configure VLAN 0")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20250602194914.1011890-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Clément Léger <cleger@rivosinc.com> says:
The SBI Firmware Feature extension allows the S-mode to request some
specific features (either hardware or software) to be enabled. This
series uses this extension to request misaligned access exception
delegation to S-mode in order to let the kernel handle it. It also adds
support for the KVM FWFT SBI extension based on the misaligned access
handling infrastructure.
FWFT SBI extension is part of the SBI V3.0 specifications [1]. It can be
tested using the qemu provided at [2] which contains the series from
[3]. Upstream kvm-unit-tests can be used inside kvm to tests the correct
delegation of misaligned exceptions. Upstream OpenSBI can be used.
The tests can be run using the kselftest from series [4].
$ qemu-system-riscv64 \
-cpu rv64,trap-misaligned-access=true,v=true \
-M virt \
-m 1024M \
-bios fw_dynamic.bin \
-kernel Image
...
# ./misaligned
TAP version 13
1..23
# Starting 23 tests from 1 test cases.
# RUN global.gp_load_lh ...
# OK global.gp_load_lh
ok 1 global.gp_load_lh
# RUN global.gp_load_lhu ...
# OK global.gp_load_lhu
ok 2 global.gp_load_lhu
# RUN global.gp_load_lw ...
# OK global.gp_load_lw
ok 3 global.gp_load_lw
# RUN global.gp_load_lwu ...
# OK global.gp_load_lwu
ok 4 global.gp_load_lwu
# RUN global.gp_load_ld ...
# OK global.gp_load_ld
ok 5 global.gp_load_ld
# RUN global.gp_load_c_lw ...
# OK global.gp_load_c_lw
ok 6 global.gp_load_c_lw
# RUN global.gp_load_c_ld ...
# OK global.gp_load_c_ld
ok 7 global.gp_load_c_ld
# RUN global.gp_load_c_ldsp ...
# OK global.gp_load_c_ldsp
ok 8 global.gp_load_c_ldsp
# RUN global.gp_load_sh ...
# OK global.gp_load_sh
ok 9 global.gp_load_sh
# RUN global.gp_load_sw ...
# OK global.gp_load_sw
ok 10 global.gp_load_sw
# RUN global.gp_load_sd ...
# OK global.gp_load_sd
ok 11 global.gp_load_sd
# RUN global.gp_load_c_sw ...
# OK global.gp_load_c_sw
ok 12 global.gp_load_c_sw
# RUN global.gp_load_c_sd ...
# OK global.gp_load_c_sd
ok 13 global.gp_load_c_sd
# RUN global.gp_load_c_sdsp ...
# OK global.gp_load_c_sdsp
ok 14 global.gp_load_c_sdsp
# RUN global.fpu_load_flw ...
# OK global.fpu_load_flw
ok 15 global.fpu_load_flw
# RUN global.fpu_load_fld ...
# OK global.fpu_load_fld
ok 16 global.fpu_load_fld
# RUN global.fpu_load_c_fld ...
# OK global.fpu_load_c_fld
ok 17 global.fpu_load_c_fld
# RUN global.fpu_load_c_fldsp ...
# OK global.fpu_load_c_fldsp
ok 18 global.fpu_load_c_fldsp
# RUN global.fpu_store_fsw ...
# OK global.fpu_store_fsw
ok 19 global.fpu_store_fsw
# RUN global.fpu_store_fsd ...
# OK global.fpu_store_fsd
ok 20 global.fpu_store_fsd
# RUN global.fpu_store_c_fsd ...
# OK global.fpu_store_c_fsd
ok 21 global.fpu_store_c_fsd
# RUN global.fpu_store_c_fsdsp ...
# OK global.fpu_store_c_fsdsp
ok 22 global.fpu_store_c_fsdsp
# RUN global.gen_sigbus ...
[12797.988647] misaligned[618]: unhandled signal 7 code 0x1 at 0x0000000000014dc0 in misaligned[4dc0,10000+76000]
[12797.988990] CPU: 0 UID: 0 PID: 618 Comm: misaligned Not tainted 6.13.0-rc6-00008-g4ec4468967c9-dirty #51
[12797.989169] Hardware name: riscv-virtio,qemu (DT)
[12797.989264] epc : 0000000000014dc0 ra : 0000000000014d00 sp : 00007fffe165d100
[12797.989407] gp : 000000000008f6e8 tp : 0000000000095760 t0 : 0000000000000008
[12797.989544] t1 : 00000000000965d8 t2 : 000000000008e830 s0 : 00007fffe165d160
[12797.989692] s1 : 000000000000001a a0 : 0000000000000000 a1 : 0000000000000002
[12797.989831] a2 : 0000000000000000 a3 : 0000000000000000 a4 : ffffffffdeadbeef
[12797.989964] a5 : 000000000008ef61 a6 : 626769735f6e0000 a7 : fffffffffffff000
[12797.990094] s2 : 0000000000000001 s3 : 00007fffe165d838 s4 : 00007fffe165d848
[12797.990238] s5 : 000000000000001a s6 : 0000000000010442 s7 : 0000000000010200
[12797.990391] s8 : 000000000000003a s9 : 0000000000094508 s10: 0000000000000000
[12797.990526] s11: 0000555567460668 t3 : 00007fffe165d070 t4 : 00000000000965d0
[12797.990656] t5 : fefefefefefefeff t6 : 0000000000000073
[12797.990756] status: 0000000200004020 badaddr: 000000000008ef61 cause: 0000000000000006
[12797.990911] Code: 8793 8791 3423 fcf4 3783 fc84 c737 dead 0713 eef7 (c398) 0001
# OK global.gen_sigbus
ok 23 global.gen_sigbus
# PASSED: 23 / 23 tests passed.
# Totals: pass:23 fail:0 xfail:0 xpass:0 skip:0 error:0
With kvm-tools:
# lkvm run -k sbi.flat -m 128
Info: # lkvm run -k sbi.flat -m 128 -c 1 --name guest-97
Info: Removed ghost socket file "/root/.lkvm//guest-97.sock".
##########################################################################
# kvm-unit-tests
##########################################################################
... [test messages elided]
PASS: sbi: fwft: FWFT extension probing no error
PASS: sbi: fwft: get/set reserved feature 0x6 error == SBI_ERR_DENIED
PASS: sbi: fwft: get/set reserved feature 0x3fffffff error == SBI_ERR_DENIED
PASS: sbi: fwft: get/set reserved feature 0x80000000 error == SBI_ERR_DENIED
PASS: sbi: fwft: get/set reserved feature 0xbfffffff error == SBI_ERR_DENIED
PASS: sbi: fwft: misaligned_deleg: Get misaligned deleg feature no error
PASS: sbi: fwft: misaligned_deleg: Set misaligned deleg feature invalid value error
PASS: sbi: fwft: misaligned_deleg: Set misaligned deleg feature invalid value error
PASS: sbi: fwft: misaligned_deleg: Set misaligned deleg feature value no error
PASS: sbi: fwft: misaligned_deleg: Set misaligned deleg feature value 0
PASS: sbi: fwft: misaligned_deleg: Set misaligned deleg feature value no error
PASS: sbi: fwft: misaligned_deleg: Set misaligned deleg feature value 1
PASS: sbi: fwft: misaligned_deleg: Verify misaligned load exception trap in supervisor
SUMMARY: 50 tests, 2 unexpected failures, 12 skipped
This series is available at [5].
[Palmer: slighyt commit text modification, as SBI-3.0 is merged now.
Also drop the KVM patches, as they're too late.]
* b4-shazam-merge:
riscv: misaligned: add a function to check misalign trap delegability
riscv: misaligned: move emulated access uniformity check in a function
riscv: misaligned: declare misaligned_access_speed under CONFIG_RISCV_MISALIGNED
riscv: misaligned: use on_each_cpu() for scalar misaligned access probing
riscv: misaligned: request misaligned exception from SBI
riscv: sbi: add SBI FWFT extension calls
riscv: sbi: add FWFT extension interface
riscv: sbi: add new SBI error mappings
riscv: sbi: remove useless parenthesis
riscv: sbi: add Firmware Feature (FWFT) SBI extensions definitions
Link: https://lore.kernel.org/r/20250523101932.1594077-1-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Clément Léger <cleger@rivosinc.com> says:
While debugging a few problems with the misaligned access kselftest,
Alexandre discovered some crash with the current code. Indeed, some
misaligned access was done by the kernel using put_user(). This
was resulting in trap and a kernel crash since. The path was the
following:
user -> kernel -> access to user memory -> misaligned trap -> trap ->
kernel -> misaligned handling -> memcpy -> crash due to failed page fault
while in interrupt disabled section.
Last discussion about kernel misaligned handling and interrupt reenabling
were actually not to reenable interrupt when handling misaligned access
being done by kernel. The best solution being not to do any misaligned
accesses to userspace memory, we considered a few options:
- Remove any call to put/get_user() potentially doing misaligned
accesses
- Do not do any misaligned accesses in put/get_user() itself
The second solution was the one chosen as there are too many callsites to
put/get_user() that could potentially do misaligned accesses. We tried
two approaches for that, either split access in two aligned accesses
(and do RMW for put_user()) or call copy_from/to_user() which does not
do any misaligned accesses. The later one was the simpler to implement
(although the performances are probably lower than split aligned
accesses but still way better than doing misaligned access emulation)
and allows to support what we wanted.
These commits are based on top of Alex dev/alex/get_user_misaligned_v1
branch.
[Palmer: No idea what that branch is, so I'm basing it on the uaccess
optimizations patch series which is the last thing to touch these.]
* b4-shazam-merge
riscv: uaccess: do not do misaligned accesses in get/put_user()
riscv: process: use unsigned int instead of unsigned long for put_user()
riscv: make unsafe user copy routines use existing assembly routines
Link: https://lore.kernel.org/r/20250602193918.868962-1-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
riscv patches for 6.16-rc1, part 2
* Performance improvements
- Add support for vdso getrandom
- Implement raid6 calculations using vectors
- Introduce svinval tlb invalidation
* Cleanup
- A bunch of deduplication of the macros we use for manipulating instructions
* Misc
- Introduce a kunit test for kprobes
- Add support for mseal as riscv fits the requirements (thanks to Lorenzo for making sure of that :))
[Palmer: There was a rebase between part 1 and part 2, so I've had to do
some more git surgery here... at least two rounds of surgery...]
* alex-pr-2: (866 commits)
RISC-V: vDSO: Wire up getrandom() vDSO implementation
riscv: enable mseal sysmap for RV64
raid6: Add RISC-V SIMD syndrome and recovery calculations
riscv: mm: Add support for Svinval extension
riscv: Add kprobes KUnit test
riscv: kprobes: Remove duplication of RV_EXTRACT_ITYPE_IMM
riscv: kprobes: Remove duplication of RV_EXTRACT_UTYPE_IMM
riscv: kprobes: Remove duplication of RV_EXTRACT_RD_REG
riscv: kprobes: Remove duplication of RVC_EXTRACT_BTYPE_IMM
riscv: kprobes: Remove duplication of RVC_EXTRACT_C2_RS1_REG
riscv: kproves: Remove duplication of RVC_EXTRACT_JTYPE_IMM
riscv: kprobes: Remove duplication of RV_EXTRACT_BTYPE_IMM
riscv: kprobes: Remove duplication of RV_EXTRACT_RS1_REG
riscv: kprobes: Remove duplication of RV_EXTRACT_JTYPE_IMM
riscv: kprobes: Move branch_funct3 to insn.h
riscv: kprobes: Move branch_rs2_idx to insn.h
Linux 6.15-rc6
Input: xpad - fix xpad_device sorting
Input: xpad - add support for several more controllers
Input: xpad - fix Share button on Xbox One controllers
...
Hook up the generic vDSO implementation to the generic vDSO getrandom
implementation by providing the required __arch_chacha20_blocks_nostack
and getrandom_syscall implementations. Also wire up the selftests.
The benchmark result:
vdso: 25000000 times in 2.466341333 seconds
libc: 25000000 times in 41.447720005 seconds
syscall: 25000000 times in 41.043926672 seconds
vdso: 25000000 x 256 times in 162.286219353 seconds
libc: 25000000 x 256 times in 2953.855018685 seconds
syscall: 25000000 x 256 times in 2796.268546000 seconds
[ alex: - Fix dynamic relocation
- Squash Nathan's fix https://lore.kernel.org/all/20250423-riscv-fix-compat_vdso-lld-v2-1-b7bbbc244501@kernel.org/
- Add comment from Loongarch ]
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Link: https://lore.kernel.org/r/20250411024600.16045-1-xry111@xry111.site
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
The Svinval extension splits SFENCE.VMA instruction into finer-grained
invalidation and ordering operations and is mandatory for RVA23S64 profile.
When Svinval is enabled the local_flush_tlb_range_threshold_asid function
should use the following sequence to optimize the tlb flushes instead of
a simple sfence.vma:
sfence.w.inval
svinval.vma
.
.
svinval.vma
sfence.inval.ir
The maximum number of consecutive svinval.vma instructions that
can be executed in local_flush_tlb_range_threshold_asid function
is limited to 64. This is required to avoid soft lockups and the
approach is similar to that used in arm64.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240702102637.9074-1-mchitale@ventanamicro.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
These objects are built as prerequisites of %.stub.o files.
There is no need to use extra-y, which is planned for deprecation.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The __mod_device_table__* symbols are only parsed by modpost to generate
MODULE_ALIAS() entries from MODULE_DEVICE_TABLE().
Therefore, these symbols do not need to be globally visible, or globally
unique.
If they are in the global scope, we would worry about the symbol
uniqueness, but modpost is fine with parsing multiple symbols with the
same name.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Another issue with <linux/export.h> is that it is sometimes included
even when EXPORT_SYMBOL() is not used at all.
Some headers (e.g. include/linux/linkage.h>) cannot be fixed for now
for the reason described in the previous commit.
This commit adds a warning for *.c files that include <linux/export.h>
but do not use EXPORT_SYMBOL() when the kernel is built with W=1.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The problem was described in commit 5b20755b77 ("init: move THIS_MODULE
from <linux/export.h> to <linux/init.h>").
To summarize it again here: <linux/export.h> is included by most C files,
even though only some of them actually export symbols. This is because
some headers, such as include/linux/{module.h,linkage}, needlessly
include <linux/export.h>.
I have added a more detailed explanation in the comments of
scripts/misc-check.
This problem will be fixed in two steps:
1. Add #include <linux/export.h> directly to C files that use
EXPORT_SYMBOL()
2. Remove #include <linux/export.h> from header files that do not use
EXPORT_SYMBOL()
This commit addresses step 1; scripts/misc-check will warn about *.[ch]
files that use EXPORT_SYMBOL() but do not include <linux/export.h>.
This check is only triggered when the kernel is built with W=1.
We need to fix 4000+ files. I hope others will help with this effort.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This script is executed only when ${KBUILD_EXTRA_WARN} contains 1.
Move this check to the top-level Makefile to allow more checks to be
easily added to this script.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Some ctags implementations are available. With this change, You can
specify your favorite one with CTAGS environment variable.
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, menu->prompt->type is checked to distinguish "comment"
(P_COMMENT) and "menu" (P_MENU) entries from regular "config" entries.
This is odd because P_COMMENT and P_MENU are not properties.
This commit introduces menu type enum to distinguish menu types more
naturally.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Use a literal block for the EXPORT_SYMBOL_GPL_FOR_MODULES() example to
avoid a Docutils warning about unmatched '*'. This ensures correct rendering
and keeps the source readable.
Warning:
Documentation/core-api/symbol-namespaces.rst:90: WARNING: Inline emphasis start-string without end-string. [docutils]
Signed-off-by: Khaled Elnaggar <khaledelnaggarlinux@gmail.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since commit 7273ad2b08 ("kbuild: link lib-y objects to vmlinux
forcibly when CONFIG_MODULES=y"), all objects from lib-y have been
forcibly linked to vmlinux when CONFIG_MODULES=y.
To simplify future changes, this commit makes all objects from lib-y
be linked regardless of the CONFIG_MODULES setting.
Most use cases (CONFIG_MODULES=y) are not affected by this change.
The vmlinux size with ARCH=arm allnoconfig, where CONFIG_MODULES=n,
increases as follows:
text data bss dec hex filename
1368644 835104 206288 2410036 24c634 vmlinux.before
1379440 837064 206288 2422792 24f808 vmlinux.after
We no longer benefit from using static libraries, but the impact is
mitigated by supporting CONFIG_LD_DEAD_CODE_DATA_ELIMINATION.
For example, the size of vmlinux remains almost the same with ARCH=arm
tinyconfig, where CONFIG_MODULES=n and
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y.
text data bss dec hex filename
455316 93404 15472 564192 89be0 vmlinux.before
455312 93404 15472 564188 89bdc vmlinux.after
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This CONFIG option, if supported by the architecture, helps reduce the
size of vmlinux.
For example, the size of vmlinux with ARCH=arm tinyconfig decreases as
follows:
text data bss dec hex filename
631684 104500 18176 754360 b82b8 vmlinux.before
455316 93404 15472 564192 89be0 vmlinux.after
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull power management fixes from Rafael Wysocki:
"Fix three issues introduced into device suspend/resume error paths in
the PM core by some of the recent updates.
First off, replace list_splice() with list_splice_init() in three
places in device suspend error paths to avoid attempting to use an
uninitialized list head going forward.
Second, rearrange device_resume() to avoid leaking the
power.is_suspended device PM flag to the next system suspend/resume
cycle where it can confuse rolling back after an error or early
wakeup.
Finally, add synchronization to dpm_async_resume_children() to avoid
resetting the async state mistakenly for devices whose resume
callbacks have already been queued up for asynchronous execution in
the given device resume phase, which fortunately can happen only if
the preceding system suspend transition has been aborted"
* tag 'pm-6.16-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: Add locking to dpm_async_resume_children()
PM: sleep: Fix power.is_suspended cleanup for direct-complete devices
PM: sleep: Fix list splicing in device suspend error paths
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN, wireless, Bluetooth, and Netfilter.
Current release - regressions:
- Revert "kunit: configs: Enable CONFIG_INIT_STACK_ALL_PATTERN in
all_tests", makes kunit error out if compiler is old
- wifi: iwlwifi: mvm: fix assert on suspend
- rxrpc: fix return from none_validate_challenge()
Current release - new code bugs:
- ovpn: couple of fixes for socket cleanup and UDP-tunnel teardown
- can: kvaser_pciefd: refine error prone echo_skb_max handling logic
- fix net_devmem_bind_dmabuf() stub when DEVMEM not compiled
- eth: airoha: fixes for config / accel in bridge mode
Previous releases - regressions:
- Bluetooth: hci_qca: move the SoC type check to the right place, fix
GPIO integration
- prevent a NULL deref in rtnl_create_link() after locking changes
- fix udp gso skb_segment after pull from frag_list
- hv_netvsc: fix potential deadlock in netvsc_vf_setxdp()
Previous releases - always broken:
- netfilter:
- nf_nat: also check reverse tuple to obtain clashing entry
- nf_set_pipapo_avx2: fix initial map fill (zeroing)
- fix the helper for incremental update of packet checksums after
modifying the IP address, used by ILA and BPF
- eth:
- stmmac: prevent div by 0 when clock rate is misconfigured
- ice: fix Tx scheduler handling of XDP and changing queue count
- eth: fix support for the RGMII interface when delays configured"
* tag 'net-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
calipso: unlock rcu before returning -EAFNOSUPPORT
seg6: Fix validation of nexthop addresses
net: prevent a NULL deref in rtnl_create_link()
net: annotate data-races around cleanup_net_task
selftests: drv-net: tso: make bkg() wait for socat to quit
selftests: drv-net: tso: fix the GRE device name
selftests: drv-net: add configs for the TSO test
wireguard: device: enable threaded NAPI
netlink: specs: rt-link: decode ip6gre
netlink: specs: rt-link: add missing byte-order properties
net: wwan: mhi_wwan_mbim: use correct mux_id for multiplexing
wifi: cfg80211/mac80211: correctly parse S1G beacon optional elements
net: dsa: b53: do not touch DLL_IQQD on bcm53115
net: dsa: b53: allow RGMII for bcm63xx RGMII ports
net: dsa: b53: do not configure bcm63xx's IMP port interface
net: dsa: b53: do not enable RGMII delay on bcm63xx
net: dsa: b53: do not enable EEE on bcm63xx
net: ti: icssg-prueth: Fix swapped TX stats for MII interfaces.
selftests: netfilter: nft_nat.sh: add test for reverse clash with nat
netfilter: nf_nat: also check reverse tuple to obtain clashing entry
...
This reports as a warning in linux-next along the lines of
Documentation/arch/riscv/cmodx.rst:14: WARNING: Title underline too short.
CMODX in the Kernel Space
--------------------- [docutils]
Documentation/arch/riscv/cmodx.rst:43: WARNING: Title underline too short.
CMODX in the User Space
--------------------- [docutils]
Documentation/arch/riscv/cmodx.rst:43: WARNING: Title underline too short.
CMODX in the User Space
--------------------- [docutils]
Link: https://lore.kernel.org/all/20250603154544.1602a8b5@canb.auug.org.au/
Fixes: 0e07200b2af6 ("riscv: Documentation: add a description about dynamic ftrace")
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20250603172856.49925-1-palmer@dabbelt.com
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
riscv patches for 6.16-rc1
* Implement atomic patching support for ftrace which finally allows to
get rid of stop_machine().
* Support for kexec_file_load() syscall
* Improve module loading time by changing the algorithm that counts the
number of plt/got entries in a module.
* Zicbop is now used in the kernel to prefetch instructions
[Palmer: There's been two rounds of surgery on this one, so as a result
it's a bit different than the PR.]
* alex-pr: (734 commits)
riscv: Improve Kconfig help for RISCV_ISA_V_PREEMPTIVE
MAINTAINERS: Update Atish's email address
riscv: hwprobe: export Zabha extension
riscv: Make regs_irqs_disabled() more clear
perf symbols: Ignore mapping symbols on riscv
RISC-V: Kconfig: Fix help text of CMDLINE_EXTEND
riscv: module: Optimize PLT/GOT entry counting
riscv: Add support for PUD THP
riscv: xchg: Prefetch the destination word for sc.w
riscv: Add ARCH_HAS_PREFETCH[W] support with Zicbop
riscv: Add support for Zicbop
riscv: Introduce Zicbop instructions
riscv/kexec_file: Fix comment in purgatory relocator
riscv: kexec_file: Support loading Image binary file
riscv: kexec_file: Split the loading of kernel and others
riscv: Documentation: add a description about dynamic ftrace
riscv: ftrace: support direct call using call_ops
riscv: Implement HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS
riscv: ftrace: support PREEMPT
riscv: add a data fence for CMODX in the kernel mode
...
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Modify the driver to post 3 fewer buffers than the maximum rx buffers
(64) allowed for the firmware. This change mitigates a hardware issue
causing a race condition in the firmware, improving stability and data
handling.
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Fixes: c2b636b3f7 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This change addresses latency issues observed in HID use cases where
events arrive in bursts. By increasing the Rx descriptor count to 64,
the firmware can handle bursty data more effectively, reducing latency
and preventing buffer overflows.
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Fixes: c2b636b3f7 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The driver was posting only 6 rx buffers, despite the maximum rx buffers
being defined as 16. Having fewer RX buffers caused firmware exceptions
in HID use cases when events arrived in bursts.
Exception seen on android 6.12 kernel.
E Bluetooth: hci0: Received hw exception interrupt
E Bluetooth: hci0: Received gp1 mailbox interrupt
D Bluetooth: hci0: 00000000: ff 3e 87 80 03 01 01 01 03 01 0c 0d 02 1c 10 0e
D Bluetooth: hci0: 00000010: 01 00 05 14 66 b0 28 b0 c0 b0 28 b0 ac af 28 b0
D Bluetooth: hci0: 00000020: 14 f1 28 b0 00 00 00 00 fa 04 00 00 00 00 40 10
D Bluetooth: hci0: 00000030: 08 00 00 00 7a 7a 7a 7a 47 00 fb a0 10 00 00 00
D Bluetooth: hci0: 00000000: 10 01 0a
E Bluetooth: hci0: ---- Dump of debug registers —
E Bluetooth: hci0: boot stage: 0xe0fb0047
E Bluetooth: hci0: ipc status: 0x00000004
E Bluetooth: hci0: ipc control: 0x00000000
E Bluetooth: hci0: ipc sleep control: 0x00000000
E Bluetooth: hci0: mbox_1: 0x00badbad
E Bluetooth: hci0: mbox_2: 0x0000101c
E Bluetooth: hci0: mbox_3: 0x00000008
E Bluetooth: hci0: mbox_4: 0x7a7a7a7a
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Fixes: c2b636b3f7 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Releasing + re-acquiring RCU lock inside list_for_each_entry_rcu() loop
body is not correct.
Fix by taking the update-side hdev->lock instead.
Fixes: c7eaf80bfb ("Bluetooth: Fix hci_link_tx_to RCU lock usage")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Pull UML updates from Johannes Berg:
"The only really new thing is the long-standing seccomp work
(originally from 2021!). Wven if it still isn't enabled by default due
to security concerns it can still be used e.g. for tests.
- remove obsolete network transports
- remove PCI IO port support
- start adding seccomp-based process handling instead of ptrace"
* tag 'uml-for-linux-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: (29 commits)
um: remove "extern" from implementation of sigchld_handler
um: fix unused variable warning
um: fix SECCOMP 32bit xstate register restore
um: pass FD for memory operations when needed
um: Add SECCOMP support detection and initialization
um: Implement kernel side of SECCOMP based process handling
um: Track userspace children dying in SECCOMP mode
um: Add helper functions to get/set state for SECCOMP
um: Add stub side of SECCOMP/futex based process handling
um: Move faultinfo extraction into userspace routine
um: vector: Use mac_pton() for MAC address parsing
um: vector: Clean up and modernize log messages
um: chan_kern: use raw spinlock for irqs_to_free_lock
MAINTAINERS: remove obsolete file entry in TUN/TAP DRIVER
um: Fix tgkill compile error on old host OSes
um: stop using PCI port I/O
um: Remove legacy network transport infrastructure
um: vector: Eliminate the dependency on uml_net
um: Remove obsolete legacy network transports
um/asm: Replace "REP; NOP" with PAUSE mnemonic
...
Doing misaligned access to userspace memory would make a trap on
platform where it is emulated. Latest fixes removed the kernel
capability to do unaligned accesses to userspace memory safely since
interrupts are kept disabled at all time during that. Thus doing so
would crash the kernel.
Such behavior was detected with GET_UNALIGN_CTL() that was doing
a put_user() with an unsigned long* address that should have been an
unsigned int*. Reenabling kernel misaligned access emulation is a bit
risky and it would also degrade performances. Rather than doing that,
we will try to avoid any misaligned accessed by using copy_from/to_user()
which does not do any misaligned accesses. This can be done only for
!CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS and thus allows to only generate
a bit more code for this config.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250602193918.868962-4-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Pull arm64 fixes from Will Deacon:
"We've got a couple of build fixes when using LLD, a missing TLB
invalidation and a workaround for broken firmware on SoCs with CPUs
that implement MPAM:
- Disable problematic linker assertions for broken versions of LLD
- Work around sporadic link failure with LLD and various randconfig
builds
- Fix missing invalidation in the TLB batching code when reclaim
races with mprotect() and friends
- Add a command-line override for MPAM to allow booting on systems
with broken firmware"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Add override for MPAM
arm64/mm: Close theoretical race where stale TLB entry remains valid
arm64: Work around convergence issue with LLD linker
arm64: Disable LLD linker ASSERT()s for the time being
Pull ARM fixes from Russell King:
- Fix arch_memremap_can_ram_remap() which incorrectly passed a PFN to
memblock_is_map_memory rather than the actual address.
- Disallow kernel mode NEON when IRQs are disabled
Explanation:
"To avoid having to preserve/restore kernel mode NEON state when
such a softirq is taken softirqs are now disabled when using the
NEON from task context."
should explain that it's nested kernel mode.
In other words, softirqs from user mode are fine, because the context
will be preserved. softirqs from kernel mode may be from a context
that has already saved the user NEON state, and thus we would need to
preserve the NEON state for the parent kernel mode context, and this
we don't allow.
The problem occurs when the kernel context disables hard IRQs, and
then uses NEON. When it's finished, and restores the userspace NEON
state, we call local_bh_enable() with hard IRQs disabled, which
causes a warning.
This commit addresses that by disallowing the use of NEON with hard
IRQs disabled.
https://lore.kernel.org/all/20250516231858.27899-4-ebiggers@kernel.org/T/#m104841b6e9346b1814c8b0fb9f2340551b0cd3e8
has some further context
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9446/1: Disallow kernel mode NEON when IRQs are disabled
ARM: 9447/1: arm/memremap: fix arch_memremap_can_ram_remap()
Björn Töpel <bjorn@kernel.org> says:
From: Björn Töpel <bjorn@rivosinc.com>
Hi!
For over a year ago, Daniel and I was testing the V2 of Song's series.
I also promised to take the V2, that had been sitting on the lists for
too long, to rebase it on a new kernel, and re-test it.
One year later, here's the V3! ;-)
There are no changes from V2 other, than some simple checkpatch
cleanups.
Song's original cover:
| This series makes the kexec_file_load() syscall support to load
| Image binary file. At the same time, corresponding support for
| kexec-tools had been pushed to my repo[2].
|
| Now, we can leverage that kexec-tools and this series to use the
| kexec_load() or kexec_file_load() syscall to boot both vmlinux and
| Image file, as seen in these combo tests:
|
| ```
| 1. kexec -l vmlinux
| 2. kexec -l Image
| 3. kexec -s -l vmlinux
| 4. kexec -s -l Image
| ```
Notably, kexec-tools has still not made it upstream. I've prepared a
branch on my GH [3], that I indend to post ASAP. That branch is a
collection of fixes/features, including Song's userland Image loading.
The V2 is here [2], and V1 [1].
I've tested the kexec-file/Image on qemu-rv64, with following
combinations:
* ACPI/UEFI
* DT/UEFI
* DT
both "regular" kexec (-s + -e), and crashkernels (-p).
Note that there are two purgatory patches that has to be present (part
of -rc1, so all good):
commit 28093cfef5 ("riscv/kexec_file: Handle R_RISCV_64 in purgatory relocator")
commit 3f7023171d ("riscv/purgatory: 4B align purgatory_start")
[1] https://lore.kernel.org/linux-riscv/20230914020044.1397356-1-songshuaishuai@tinylab.org/
[2] https://lore.kernel.org/linux-riscv/20231016092006.3347632-1-songshuaishuai@tinylab.org/
[3] https://github.com/bjoto/kexec-tools/tree/rv-on-master
* patches from https://lore.kernel.org/r/20250409193004.643839-1-bjorn@kernel.org:
riscv: kexec_file: Support loading Image binary file
riscv: kexec_file: Split the loading of kernel and others
Link: https://lore.kernel.org/r/20250409193004.643839-1-bjorn@kernel.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
perf reports that 99.63% of the cycles from `modprobe amdgpu` are spent
inside module_frob_arch_sections(). This is because amdgpu.ko contains
about 300000 relocations in its .rela.text section, and the algorithm in
count_max_entries() takes quadratic time.
Apply two optimizations from the arm64 code, which together reduce the
total execution time by 99.58%. First, sort the relocations so duplicate
entries are adjacent. Second, reduce the number of relocations that must
be sorted by filtering to only relocations that need PLT/GOT entries, as
done in commit d4e0340919 ("arm64/module: Optimize module load time by
optimizing PLT counting").
Unlike the arm64 code, here the filtering and sorting is done in a
scratch buffer, because the HI20 relocation search optimization in
apply_relocate_add() depends on the original order of the relocations.
This allows accumulating PLT/GOT relocations across sections so sorting
and counting is only done once per module.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20250409171526.862481-3-samuel.holland@sifive.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Andy Chiu <andybnac@gmail.com> says:
This series makes atomic code patching in ftrace possible and eliminates
the need of the stop_machine dance. The major difference of this version
is that we merge the CALL_OPS support from Puranjay [1] and make direct
calls available for practical uses such as BPF. Thanks for the time
reviewing the series and suggestions, we hope this version gets a step
closer to happening in the upstream.
Please reference the link to v3 below for more introductory view of the
implementation [2]
Added patch: 2, 4, 10, 11, 12
Modified patch: 5, 6
Unchanged patch: 1, 3, 7, 8, 9
(1, 8 has commit msg modified)
Special thanks to Björn for his efforts on testing and guiding the
series!
[1]: https://lore.kernel.org/lkml/20240306165904.108141-1-puranjay12@gmail.com/
[2]: https://lore.kernel.org/linux-riscv/20241127172908.17149-1-andybnac@gmail.com/
* patches from https://lore.kernel.org/r/20250407180838.42877-1-andybnac@gmail.com:
riscv: Documentation: add a description about dynamic ftrace
riscv: ftrace: support direct call using call_ops
riscv: Implement HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS
riscv: ftrace: support PREEMPT
riscv: add a data fence for CMODX in the kernel mode
riscv: vector: Support calling schedule() for preemptible Vector
riscv: ftrace: do not use stop_machine to update code
riscv: ftrace: prepare ftrace for atomic code patching
kernel: ftrace: export ftrace_sync_ipi
riscv: ftrace: align patchable functions to 4 Byte boundary
riscv: ftrace factor out code defined by !WITH_ARG
riscv: ftrace: support fastcc in Clang for WITH_ARGS
Link: https://lore.kernel.org/r/20250407180838.42877-1-andybnac@gmail.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Jonas Gorski