Currently, the persistent ring buffer instance needs to be read before
using it. This means we have to wait for boot up user space and dump
the persistent ring buffer. However, in that case we can not start
tracing on it from the kernel cmdline.
To solve this limitation, this adds an option which allows to create
a trace instance as a backup of the persistent ring buffer at boot.
If user specifies trace_instance=<BACKUP>=<PERSIST_RB> then the
<BACKUP> instance is made as a copy of the <PERSIST_RB> instance.
For example, the below kernel cmdline records all syscalls, scheduler
and interrupt events on the persistent ring buffer `boot_map` but
before starting the tracing, it makes a `backup` instance from the
`boot_map`. Thus, the `backup` instance has the previous boot events.
'reserve_mem=12M:4M:trace trace_instance=boot_map@trace,syscalls:*,sched:*,irq:* trace_instance=backup=boot_map'
As you can see, this just make a copy of entire reserved area and
make a backup instance on it. So you can release (or shrink) the
backup instance after use it to save the memory usage.
/sys/kernel/tracing/instances # free
total used free shared buff/cache available
Mem: 1999284 55704 1930520 10132 13060 1914628
Swap: 0 0 0
/sys/kernel/tracing/instances # rmdir backup/
/sys/kernel/tracing/instances # free
total used free shared buff/cache available
Mem: 1999284 40640 1945584 10132 13060 1929692
Swap: 0 0 0
Note: since there is no reason to make a copy of empty buffer, this
backup only accepts a persistent ring buffer as the original instance.
Also, since this backup is based on vmalloc(), it does not support
user-space mmap().
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/176377150002.219692.9425536150438129267.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
There is times when tracing the tracing infrastructure can be useful for
debugging the tracing code. Currently all files in the tracing directory
are set to "notrace" the functions.
Add a new config option FUNCTION_SELF_TRACING that will allow some of the
files in the tracing infrastructure to be traced. It requires a config to
enable because it will add noise to the function tracer if events and
other tracing features are enabled. Tracing functions and events together
is quite common, so not tracing the event code should be the default.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://patch.msgid.link/20251120181514.736f2d5f@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The function trigger_process_regex() is called by a few functions, where
only one calls strim() on the buffer passed to it. That leaves the other
functions not trimming the end of the buffer passed in and making it a
little inconsistent.
Remove the strim() from event_trigger_regex_write() and have
trigger_process_regex() use strim() instead of skip_spaces(). The buff
variable is not passed in as const, so it can be modified.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://patch.msgid.link/20251125214032.323747707@kernel.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The event trigger data requires a full tracepoint_synchronize_unregister()
call before freeing. That call can take 100s of milliseconds to complete.
In order to allow for bulk freeing of the trigger data, it can not call
the tracepoint_synchronize_unregister() for every individual trigger data
being free.
Create a kthread that gets created the first time a trigger data is freed,
and have it use the lockless llist to get the list of data to free, run
the tracepoint_synchronize_unregister() then free everything in the list.
By freeing hundreds of event_trigger_data elements together, it only
requires two runs of the synchronization function, and not hundreds of
runs. This speeds up the operation by orders of magnitude (milliseconds
instead of several seconds).
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://patch.msgid.link/20251125214032.151674992@kernel.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In event_trigger_regex_release(), the only code is:
mutex_lock(&event_mutex);
if (file->f_mode & FMODE_READ)
seq_release(inode, file);
mutex_unlock(&event_mutex);
return 0;
There's nothing special about the file->f_mode or the seq_release() that
requires any locking. Remove the unnecessary locks.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://patch.msgid.link/20251125214031.975879283@kernel.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Now that there's pretty much a one to one mapping between the struct
event_trigger_ops and struct event_command, there's no reason to have two
different structures. Merge the function pointers of event_trigger_ops
into event_command.
There's one exception in trace_events_hist.c for the
event_hist_trigger_named_ops. This has special logic for the init and free
function pointers for "named histograms". In this case, allocate the
cmd_ops of the event_trigger_data and set it to the proper init and free
functions, which are used to initialize and free the event_trigger_data
respectively. Have the free function and the init function (on failure)
free the cmd_ops of the data element.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20251125200932.446322765@kernel.org
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The struct event_command has a callback function called get_trigger_ops().
This callback returns the "trigger_ops" to use for the trigger. These ops
define the trigger function, how to init the trigger, how to print the
trigger and how to free it.
The only reason there's a callback function to get these ops is because
some triggers have two types of operations. One is an "always on"
operation, and the other is a "count down" operation. If a user passes in
a parameter to say how many times the trigger should execute. For example:
echo stacktrace:5 > events/kmem/kmem_cache_alloc/trigger
It will trigger the stacktrace for the first 5 times the kmem_cache_alloc
event is hit.
Instead of having two different trigger_ops since the only difference
between them is the tigger itself (the print, init and free functions are
all the same), just use a single ops that the event_command points to and
add a function field to the trigger_ops to have a count_func.
When a trigger is added to an event, if there's a count attached to it and
the trigger ops has the count_func field, the data allocated to represent
this trigger will have a new flag set called COUNT.
Then when the trigger executes, it will check if the COUNT data flag is
set, and if so, it will call the ops count_func(). If that returns false,
it returns without executing the trigger.
This removes the need for duplicate event_trigger_ops structures.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20251125200932.274566147@kernel.org
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Since tracer_init_tracefs_work_func() only updates the tracer options
for the global_trace, the instances created by the kernel cmdline
do not have those options.
Fix to update tracer options for those boot-time created instances
to show those options.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/176354112555.2356172.3989277078358802353.stgit@mhiramat.tok.corp.google.com
Fixes: 428add559b69 ("tracing: Have tracer option be instance specific")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The FTRACE_OPS_FL_INITIALIZED flag is cleared in register_ftrace_direct,
which can make it initialized by ftrace_ops_init() even if it is already
initialized. It seems that there is no big deal here, but let's still fix
it.
Link: https://patch.msgid.link/20251110121808.1559240-1-dongml2@chinatelecom.cn
Fixes: f64dd4627ec6 ("ftrace: Add multi direct register/unregister interface")
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The flags and opts used in tracing_trace_options_show() now come directly
from the trace array "current_trace_flags" and not the current_trace. The
variable "trace" was still being assigned to tr->current_trace but never
used. This caused a warning in clang.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251117120637.43ef995d@gandalf.local.home
Reported-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Closes: https://lore.kernel.org/all/aRtHWXzYa8ijUIDa@black.igk.intel.com/
Fixes: 428add559b692 ("tracing: Have tracer option be instance specific")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The variable fgraph_no_sleep_time changed from being a boolean to being a
counter. A check is made to make sure that it never goes below zero. But
the variable being unsigned makes the check always fail even if it does go
below zero.
Make the variable a signed int so that checking it going below zero still
works.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251125104751.4c9c7f28@gandalf.local.home
Fixes: 5abb6ccb58f0 ("tracing: Have function graph tracer option sleep-time be per instance")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aR1yRQxDmlfLZzoo@stanley.mountain/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently the set_flags() of the function graph tracer has a bunch of:
if (bit == FLAG1) {
[..]
}
if (bit == FLAG2) {
[..]
}
To clean it up a bit, convert it over to a switch statement.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20251114192319.117123664@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently the option to have function graph tracer to ignore time spent
when a task is sleeping is global when the interface is per-instance.
Changing the value in one instance will affect the results of another
instance that is also running the function graph tracer. This can lead to
confusing results.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20251114192318.950255167@kernel.org
Fixes: c132be2c4fcc1 ("function_graph: Have the instances use their own ftrace_ops for filtering")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The option "graph-time" affects the function profiler when it is using the
function graph infrastructure. It has nothing to do with the function
graph tracer itself. The option only affects the global function profiler
and does nothing to the function graph tracer.
Move it out of the function graph tracer options and make it a global
option that is only available at the top level instance.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20251114192318.781711154@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently the option to trace interrupts in the function graph tracer is
global when the interface is per-instance. Changing the value in one
instance will affect the results of another instance that is also running
the function graph tracer. This can lead to confusing results.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20251114192318.613867934@kernel.org
Fixes: c132be2c4fcc1 ("function_graph: Have the instances use their own ftrace_ops for filtering")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When the system has many cores and task switching is frequent,
setting set_ftrace_pid can cause frequent pid_list->lock contention
and high system sys usage.
For example, in a 288-core VM environment, we observed 267 CPUs
experiencing contention on pid_list->lock, with stack traces showing:
#4 [ffffa6226fb4bc70] native_queued_spin_lock_slowpath at ffffffff99cd4b7e
#5 [ffffa6226fb4bc90] _raw_spin_lock_irqsave at ffffffff99cd3e36
#6 [ffffa6226fb4bca0] trace_pid_list_is_set at ffffffff99267554
#7 [ffffa6226fb4bcc0] trace_ignore_this_task at ffffffff9925c288
#8 [ffffa6226fb4bcd8] ftrace_filter_pid_sched_switch_probe at ffffffff99246efe
#9 [ffffa6226fb4bcf0] __schedule at ffffffff99ccd161
Replaces the existing spinlock with a seqlock to allow concurrent readers,
while maintaining write exclusivity.
Link: https://patch.msgid.link/20251113000252.1058144-1-leonylgao@gmail.com
Reviewed-by: Huang Cun <cunhuang@tencent.com>
Signed-off-by: Yongliang Gao <leonylgao@tencent.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently the function graph tracer's options are saved via a global mask
when it should be per instance. Use the new infrastructure to define a
"default_flags" field in the tracer structure that is used for the top
level instance as well as new ones.
Currently the global mask causes confusion:
# cd /sys/kernel/tracing
# mkdir instances/foo
# echo function_graph > instances/foo/current_tracer
# echo 1 > options/funcgraph-args
# echo function_graph > current_tracer
# cat trace
[..]
2) | _raw_spin_lock_irq(lock=0xffff96b97dea16c0) {
2) 0.422 us | do_raw_spin_lock(lock=0xffff96b97dea16c0);
7) | rcu_sched_clock_irq(user=0) {
2) 1.478 us | }
7) 0.758 us | rcu_is_cpu_rrupt_from_idle();
2) 0.647 us | enqueue_hrtimer(timer=0xffff96b97dea2058, base=0xffff96b97dea1740, mode=0);
# cat instances/foo/options/funcgraph-args
1
# cat instances/foo/trace
[..]
4) | __x64_sys_read() {
4) | ksys_read() {
4) 0.755 us | fdget_pos();
4) | vfs_read() {
4) | rw_verify_area() {
4) | security_file_permission() {
4) | apparmor_file_permission() {
4) | common_file_perm() {
4) | aa_file_perm() {
4) | rcu_read_lock_held() {
[..]
The above shows that updating the "funcgraph-args" option at the top level
instance also updates the "funcgraph-args" option in the instance but
because the update is only done by the instance that gets changed (as it
should), it's confusing to see that the option is already set in the other
instance.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20251111232429.641030027@kernel.org
Fixes: c132be2c4fcc1 ("function_graph: Have the instances use their own ftrace_ops for filtering")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently the function tracer's options are saved via a global mask when
it should be per instance. Use the new infrastructure to define a
"default_flags" field in the tracer structure that is used for the top
level instance as well as new ones.
Currently the global mask causes confusion:
# cd /sys/kernel/tracing
# mkdir instances/foo
# echo function > instances/foo/current_tracer
# echo 1 > options/func-args
# echo function > current_tracer
# cat trace
[..]
<idle>-0 [005] d..3. 1050.656187: rcu_needs_cpu() <-tick_nohz_next_event
<idle>-0 [005] d..3. 1050.656188: get_next_timer_interrupt(basej=0x10002dbad, basem=0xf45fd7d300) <-tick_nohz_next_event
<idle>-0 [005] d..3. 1050.656189: _raw_spin_lock(lock=0xffff8944bdf5de80) <-__get_next_timer_interrupt
<idle>-0 [005] d..4. 1050.656190: do_raw_spin_lock(lock=0xffff8944bdf5de80) <-__get_next_timer_interrupt
<idle>-0 [005] d..4. 1050.656191: _raw_spin_lock_nested(lock=0xffff8944bdf5f140, subclass=1) <-__get_next_timer_interrupt
# cat instances/foo/options/func-args
1
# cat instances/foo/trace
[..]
kworker/4:1-88 [004] ...1. 298.127735: next_zone <-refresh_cpu_vm_stats
kworker/4:1-88 [004] ...1. 298.127736: first_online_pgdat <-refresh_cpu_vm_stats
kworker/4:1-88 [004] ...1. 298.127738: next_online_pgdat <-refresh_cpu_vm_stats
kworker/4:1-88 [004] ...1. 298.127739: fold_diff <-refresh_cpu_vm_stats
kworker/4:1-88 [004] ...1. 298.127741: round_jiffies_relative <-vmstat_update
[..]
The above shows that updating the "func-args" option at the top level
instance also updates the "func-args" option in the instance but because
the update is only done by the instance that gets changed (as it should),
it's confusing to see that the option is already set in the other instance.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20251111232429.470883736@kernel.org
Fixes: f20a580627f43 ("ftrace: Allow instances to use function tracing")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tracers can add specify options to modify them. This logic was added
before instances were created and the tracer flags were global variables.
After instances were created where a tracer may exist in more than one
instance, the flags were not updated from being global into instance
specific. This causes confusion with these options. For example, the
function tracer has an option to enable function arguments:
# cd /sys/kernel/tracing
# mkdir instances/foo
# echo function > instances/foo/current_tracer
# echo 1 > options/func-args
# echo function > current_tracer
# cat trace
[..]
<idle>-0 [005] d..3. 1050.656187: rcu_needs_cpu() <-tick_nohz_next_event
<idle>-0 [005] d..3. 1050.656188: get_next_timer_interrupt(basej=0x10002dbad, basem=0xf45fd7d300) <-tick_nohz_next_event
<idle>-0 [005] d..3. 1050.656189: _raw_spin_lock(lock=0xffff8944bdf5de80) <-__get_next_timer_interrupt
<idle>-0 [005] d..4. 1050.656190: do_raw_spin_lock(lock=0xffff8944bdf5de80) <-__get_next_timer_interrupt
<idle>-0 [005] d..4. 1050.656191: _raw_spin_lock_nested(lock=0xffff8944bdf5f140, subclass=1) <-__get_next_timer_interrupt
# cat instances/foo/options/func-args
1
# cat instances/foo/trace
[..]
kworker/4:1-88 [004] ...1. 298.127735: next_zone <-refresh_cpu_vm_stats
kworker/4:1-88 [004] ...1. 298.127736: first_online_pgdat <-refresh_cpu_vm_stats
kworker/4:1-88 [004] ...1. 298.127738: next_online_pgdat <-refresh_cpu_vm_stats
kworker/4:1-88 [004] ...1. 298.127739: fold_diff <-refresh_cpu_vm_stats
kworker/4:1-88 [004] ...1. 298.127741: round_jiffies_relative <-vmstat_update
[..]
The above shows that setting "func-args" in the top level instance also
set it in the instance "foo", but since the interface of the trace flags
are per instance, the update didn't take affect in the "foo" instance.
Update the infrastructure to allow tracers to add a "default_flags" field
in the tracer structure that can be set instead of "flags" which will make
the flags per instance. If a tracer needs to keep the flags global (like
blktrace), keeping the "flags" field set will keep the old behavior.
This does not update function or the function graph tracers. That will be
handled later.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20251111232429.305317942@kernel.org
Fixes: f20a580627f43 ("ftrace: Allow instances to use function tracing")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The "mask" passed in to set_trace_flag() has a single bit set. The
function then checks if the mask is equal to one of the option masks and
performs the appropriate function associated to that option.
Instead of having a bunch of "if ()" statement, use a "switch ()"
statement instead to make it cleaner and a bit more optimal.
No function changes.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20251106003501.890298562@kernel.org
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The call to update_marker_trace() in set_tracer_flag() performs the update
to the tr->trace_flags. There's no reason to perform it again after it is
called. Return immediately instead.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20251106003501.726406870@kernel.org
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The function add_tracer_options() can fail, but currently it is ignored.
Pass the status of add_tracer_options() up to adding a new tracer as well
as when an instance is created. Have the instance creation fail if the
add_tracer_options() fail.
Only print a warning for the top level instance, like it does with other
failures.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20251105161935.375299297@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When a tracer does not define their own flags, dummy options and flags are
used so that the values are always valid. There's not that many locations
that reference these values so having dummy versions just complicates the
code. Remove the dummy values and just check for NULL when appropriate.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20251105161935.206093132@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Updates to the function profiler adds new options to tracefs. The options
are currently defined by an enum as flags. The added options brings the
number of options over 32, which means they can no longer be held in a 32
bit enum. The TRACE_ITER_* flags are converted to a macro TRACE_ITER(*) to
allow the creation of options to still be done by macros.
This change is intrusive, as it affects all TRACE_ITER* options throughout
the trace code. Merge the branch that added these options and converted
the TRACE_ITER_* enum into a TRACE_ITER(*) macro, to allow the topic
branches to still be developed without conflict.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Function profiler shows the hit count of each function using its symbol
name. However, there are some same-name local symbols, which we can not
distinguish.
To solve this issue, this introduces an option to show the symbols
in "_text+OFFSET" format. This can avoid exposing the random shift of
KASLR. The functions in modules are shown as "MODNAME+OFFSET" where the
offset is from ".text".
E.g. for the kernel text symbols, specify vmlinux and the output to
addr2line, you can find the actual function and source info;
$ addr2line -fie vmlinux _text+3078208
__balance_callbacks
kernel/sched/core.c:5064
for modules, specify the module file and .text+OFFSET;
$ addr2line -fie samples/trace_events/trace-events-sample.ko .text+8224
do_simple_thread_func
samples/trace_events/trace-events-sample.c:23
Link: https://lore.kernel.org/all/176187878064.994619.8878296550240416558.stgit@devnote2/
Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Since enum trace_iterator_flags is 32bit, the max number of the
option flags is limited to 32 and it is fully used now. To add
a new option, we need to expand it.
So replace the TRACE_ITER_##flag with TRACE_ITER(flag) macro which
is 64bit bitmask.
Link: https://lore.kernel.org/all/176187877103.994619.166076000668757232.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
When the "fields" option is enabled, it prints each trace event field
based on its type. But a dynamic array and a dynamic string can both have
a "char *" type. Printing it as a string can cause escape characters to be
printed and mess up the output of the trace.
For dynamic strings, test if there are any non-printable characters, and
if so, print both the string with the non printable characters as '.', and
the print the hex value of the array.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Takaya Saeki <takayas@google.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Douglas Raillard <douglas.raillard@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/20251028231148.929243047@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add some logic to give the openat system call trace event a bit more human
readable information:
syscalls:sys_enter_openat: dfd: 0xffffff9c, filename: 0x7f0053dc121c "/etc/ld.so.cache", flags: O_RDONLY|O_CLOEXEC, mode: 0000
The above is output from "perf script" and now shows the flags used by the
openat system call.
Since the output from tracing is in the kernel, it can also remove the
mode field when not used (when flags does not contain O_CREATE|O_TMPFILE)
touch-1185 [002] ...1. 1291.690154: sys_openat(dfd: 4294967196, filename: 139785545139344 "/usr/lib/locale/locale-archive", flags: O_RDONLY|O_CLOEXEC)
touch-1185 [002] ...1. 1291.690504: sys_openat(dfd: 18446744073709551516, filename: 140733603151330 "/tmp/x", flags: O_WRONLY|O_CREAT|O_NOCTTY|O_NONBLOCK, mode: 0666)
As system calls have a fixed ABI, their trace events can be extended. This
currently only updates the openat system call, but others may be extended
in the future.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Takaya Saeki <takayas@google.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Douglas Raillard <douglas.raillard@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/20251028231148.763161484@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When displaying the contents of the user space data passed to the kernel,
instead of just showing the array values, also print any printable
content.
Instead of just:
bash-1113 [003] ..... 3433.290654: sys_write(fd: 2, buf: 0x555a8deeddb0 (72:6f:6f:74:40:64:65:62:69:61:6e:2d:78:38:36:2d:36:34:3a:7e:23:20), count: 0x16)
Display:
bash-1113 [003] ..... 3433.290654: sys_write(fd: 2, buf: 0x555a8deeddb0 (72:6f:6f:74:40:64:65:62:69:61:6e:2d:78:38:36:2d:36:34:3a:7e:23:20) "root@debian-x86-64:~# ", count: 0x16)
This only affects tracing and does not affect perf, as this only updates
the output from the kernel. The output from perf is via user space. This
may change by an update to libtraceevent that will then update perf to
have this as well.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Takaya Saeki <takayas@google.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Douglas Raillard <douglas.raillard@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/20251028231148.429422865@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When a system call that can copy user space addresses into the ring
buffer, it can copy up to 511 bytes of data. This can waste precious ring
buffer space if the user isn't interested in the output. Add a new file
"syscall_user_buf_size" that gets initialized to a new config
CONFIG_SYSCALL_BUF_SIZE_DEFAULT that defaults to 63.
The config also is used to limit how much perf can read from user space.
Also lower the max down to 165, as this isn't to record everything that a
system call may be passing through to the kernel. 165 is more than enough.
The reason for 165 is because adding one for the nul terminating byte, as
well as possibly needing to append the "..." string turns it into 170
bytes. As this needs to save up to 3 arguments and 3 * 170 is 510 which
fits nicely in 512 bytes (a power of 2).
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Takaya Saeki <takayas@google.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Douglas Raillard <douglas.raillard@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/20251028231148.260068913@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Allow more than one field of a syscall trace event to read user space.
Build on top of the user_mask by allowing more than one bit to be set that
corresponds to the @args array of the syscall metadata. For each argument
in the @args array that is to be read, it will have a dynamic array/string
field associated to it.
Note that multiple fields to be read from user space is not supported if
the user_arg_size field is set in the syscall metada. That field can only
be used if only one field is being read from user space as that field is a
number representing the size field of the syscall event that holds the
size of the data to read from user space. It becomes ambiguous if the
system call reads more than one field. Currently this is not an issue.
If a syscall event happens to enable two events to read user space and
sets the user_arg_size field, it will trigger a warning at boot and the
user_arg_size field will be cleared.
The per CPU buffer that is used to read the user space addresses is now
broken up into 3 sections, each of 168 bytes. The reason for 168 is that
it is the biggest portion of 512 bytes divided by 3 that is 8 byte aligned.
The max amount copied into the ring buffer from user space is now only 128
bytes, which is plenty. When reading user space, it still reads 167
(168-1) bytes and uses the remaining to know if it should append the extra
"..." to the end or not.
This will allow the event to look like this:
sys_renameat2(olddfd: 0xffffff9c, oldname: 0x7ffe02facdff "/tmp/x", newdfd: 0xffffff9c, newname: 0x7ffe02face06 "/tmp/y", flags: 1)
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Takaya Saeki <takayas@google.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Douglas Raillard <douglas.raillard@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/20251028231148.095789277@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Some of the system calls that read a fixed length of memory from the user
space address are not arrays but strings. Take a bit away from the nb_args
field in the syscall meta data to use as a flag to denote that the system
call's user_arg_size is being used as a string. The nb_args should never
be more than 6, so 7 bits is plenty to hold that number. When the
user_arg_is_str flag that, when set, will display the data array from the
user space address as a string and not an array.
This will allow the output to look like this:
sys_sethostname(name: 0x5584310eb2a0 "debian", len: 6)
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Takaya Saeki <takayas@google.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Douglas Raillard <douglas.raillard@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/20251028231147.930550359@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
For system call events that have a length field, add a "user_arg_size"
parameter to the system call meta data that denotes the index of the args
array that holds the size of arg that the user_mask field has a bit set
for.
The "user_mask" has a bit set that denotes the arg that points to an array
in the user space address space and if a system call event has the
user_mask field set and the user_arg_size set, it will then record the
content of that address into the trace event, up to the size defined by
SYSCALL_FAULT_BUF_SZ - 1.
This allows the output to look like:
sys_write(fd: 0xa, buf: 0x5646978d13c0 (01:00:05:00:00:00:00:00:01:87:55:89:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00), count: 0x20)
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Takaya Saeki <takayas@google.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Douglas Raillard <douglas.raillard@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/20251028231147.763528474@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Use guard(mutex)(&syscall_trace_lock) for perf_sysenter_enable() and
perf_sysenter_disable() as well as for the perf_sysexit_enable() and
perf_sysexit_disable(). This will make it easier to update these functions
with other code that has early exit handling.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Takaya Saeki <takayas@google.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Douglas Raillard <douglas.raillard@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/20251028231147.429583335@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
As of commit 654ced4a1377 ("tracing: Introduce tracepoint_is_faultable()")
system call trace events allow faulting in user space memory. Have some of
the system call trace events take advantage of this.
Use the trace_user_fault_read() logic to read the user space buffer from
user space and instead of just saving the pointer to the buffer in the
system call event, also save the string that is passed in.
The syscall event has its nb_args shorten from an int to a short (where
even u8 is plenty big enough) and the freed two bytes are used for
"user_mask". The new "user_mask" field is used to store the index of the
"args" field array that has the address to read from user space. This
value is set to 0 if the system call event does not need to read user
space for a field. This mask can be used to know if the event may fault or
not. Only one bit set in user_mask is supported at this time.
This allows the output to look like this:
sys_access(filename: 0x7f8c55368470 "/etc/ld.so.preload", mode: 4)
sys_execve(filename: 0x564ebcf5a6b8 "/usr/bin/emacs", argv: 0x7fff357c0300, envp: 0x564ebc4a4820)
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Takaya Saeki <takayas@google.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Douglas Raillard <douglas.raillard@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/20251028231147.261867956@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The write to the trace_marker file is a critical section where it cannot
take locks nor allocate memory. To read from user space, it allocates a per
CPU buffer when the trace_marker file is opened, and then when the write
system call is performed, it uses the following method to read from user
space:
preempt_disable();
buffer = per_cpu_ptr(cpu_buffers, cpu);
do {
cnt = nr_context_switches_cpu();
migrate_disable();
preempt_enable();
ret = copy_from_user(buffer, ptr, len);
preempt_disable();
migrate_enable();
} while (!ret && cnt != nr_context_switches_cpu());
if (!ret)
ring_buffer_write(buffer);
preempt_enable();
It records the number of context switches for the current CPU, enables
preemption, copies from user space, disable preemption and then checks if
the number of context switches changed. If it did not, then the buffer is
valid, otherwise the buffer may have been corrupted and the read from user
space must be tried again.
The system call trace events are now faultable and have the same
restrictions as the trace_marker write. For system calls to read the user
space buffer (for example to read the file of the openat system call), it
needs the same logic. Instead of copying the code over to the system call
trace events, make the code generic to allow the system call trace events to
use the same code. The following API is added internally to the tracing sub
system (these are only exposed within the tracing subsystem and not to be
used outside of it):
trace_user_fault_init() - initializes a trace_user_buf_info descriptor
that will allocate the per CPU buffers to copy from user space into.
trace_user_fault_destroy() - used to free the allocations made by
trace_user_fault_init().
trace_user_fault_get() - update the ref count of the info descriptor to
allow more than one user to use the same descriptor.
trace_user_fault_put() - decrement the ref count.
trace_user_fault_read() - performs the above action to read user space
into the per CPU buffer. The preempt_disable() is expected before
calling this function and preemption must remain disabled while the
buffer returned is in use.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Takaya Saeki <takayas@google.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Douglas Raillard <douglas.raillard@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/20251028231147.096570057@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
subsystem after a rework
-----BEGIN PGP SIGNATURE-----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=oIwu
-----END PGP SIGNATURE-----
Merge tag 'irq_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Restore the original buslock locking in a couple of places in the irq
core subsystem after a rework
* tag 'irq_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/manage: Add buslock back in to enable_irq()
genirq/manage: Add buslock back in to __disable_irq_nosync()
genirq/chip: Add buslock back in to irq_set_handler()
throttled otherwise task movement and manipulation would lead to dangling
cfs_rq references and an eventual crash
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmj+Cf0ACgkQEsHwGGHe
VUqkvA/8D1ItoOslMeTpD6YtcaNN9oxzQ7Zow1QaWaPqirUsc+2l/zZ/3R5s0Zlt
9n0mUNdZ6EC03ZGPwYCNVLk2PvTywmMdwXOypya303PXLez2bPigekJIyXJeW5FV
YuJWTJBQWtZwiFf2ekP1OmHRceOA4KuBIwmWvfW4YwdXlUGfDLn+X6a4z8GsH/z+
ss8iUTfbEraBoFFaF16xq1zxrvRDw5vZpX2HkcHADiTVdkHcuXrf+33AeW/URWKz
FrwimiW+HJdue9trFNwLKUggHCPDoUpHLPA/kmWFiGCZWRXBPpmZ56NGRgfoadGa
4/Hb9ASMjMFl8Y9gnkOqLyomhQ8vJ8LkNqDChiJ5AiQQFYRekrPuZw+zuCENtzVZ
miAmp/kXCGSCWTMNZKlztxJGhmn/yiH+sVegmyHyDqGfqnuEBF3sebkf/DDkDAvu
88SG1YB8OlgmDIxShhfHQqw1nZa7BshLkViak6110n4fP6fbZrbY0MwBLHX2VVpQ
jJeFuvQ2pZuEl1LKVDsy+ROIShkQITZ8IOeabnm6vAeHEpjomDvmlZOmc5f9NfHV
wH6SmrHzSaEam70EJflzoglujYy+JMtVIUd7QC/jYXtPOYj1fcHPgwqlnv25uW9e
4IrwjFNwc2u0MAemKcqRO4DUEwAczD0y+dL/6eVKK8niVmat4f8=
=8MbE
-----END PGP SIGNATURE-----
Merge tag 'sched_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
- Make sure a CFS runqueue on a throttled hierarchy has its PELT clock
throttled otherwise task movement and manipulation would lead to
dangling cfs_rq references and an eventual crash
* tag 'sched_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Start a cfs_rq on throttled hierarchy with PELT clock throttled
Clang is not happy with set but unused variable (this is visible
with `make W=1` build:
kernel/sched/sched.h:3744:18: error: variable 'cpumask' set but not used [-Werror,-Wunused-but-set-variable]
It seems like the variable was never used along with the assignment
that does not have side effects as far as I can see. Remove those
altogether.
Fixes: 223baf9d17f2 ("sched: Fix performance regression introduced by mm_cid")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The locking was changed from a buslock to a plain lock, but the patch
description states there was no functional change. Assuming this was
accidental so reverting to using the buslock.
Fixes: bddd10c55407 ("genirq/manage: Rework enable_irq()")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251023154901.1333755-4-ckeepax@opensource.cirrus.com
The locking was changed from a buslock to a plain lock, but the patch
description states there was no functional change. Assuming this was
accidental so reverting to using the buslock.
Fixes: 1b7444446724 ("genirq/manage: Rework __disable_irq_nosync()")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251023154901.1333755-3-ckeepax@opensource.cirrus.com
The locking was changed from a buslock to a plain lock, but the patch
description states there was no functional change. Assuming this was
accidental so reverting to using the buslock.
Fixes: 5cd05f3e2315 ("genirq/chip: Rework irq_set_handler() variants")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251023154901.1333755-2-ckeepax@opensource.cirrus.com
- A bug caused a kernel panic when reading enabled_monitors was reported.
Change callbacks functions to always use list_head iterators and by
doing so, fix the wrong pointer that was leading to the panic.
- The rtapp/pagefault monitor relies on the MMU to be present
(pagefaults exist) but that was not enforced via kconfig, leading to
potential build errors on systems without an MMU. Add that kconfig
dependency.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaPqYBRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qrZjAQC02FScGQM+TTQ2kvIFAscKEfZddks9
iiodkKWxMTZoxwD/VxXKQUD8CP2HW9uSpJw/O3Zv+NAU80Eq8V2f7/0d9gw=
=AnZN
-----END PGP SIGNATURE-----
Merge tag 'trace-rv-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"A couple of fixes for Runtime Verification:
- A bug caused a kernel panic when reading enabled_monitors was
reported.
Change callback functions to always use list_head iterators and by
doing so, fix the wrong pointer that was leading to the panic.
- The rtapp/pagefault monitor relies on the MMU to be present
(pagefaults exist) but that was not enforced via kconfig, leading
to potential build errors on systems without an MMU.
Add that kconfig dependency"
* tag 'trace-rv-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Make rtapp/pagefault monitor depends on CONFIG_MMU
rv: Fully convert enabled_monitors to use list_head as iterator
There's a two-patch DAMON series from SeongJae Park which addresses a
missed check and possible memory leak. Apart from that it's all
singletons - please see the changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaPkz/QAKCRDdBJ7gKXxA
js6eAQCdnA10LouzzVdqA+HuYh206z8qE2KGsGKpUGDfJv40uAEA4ZbxYrMJmwhU
MXFn7Czphh/NOfFFCnrDnOlAFH7MmQc=
=hc/P
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-10-22-12-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"17 hotfixes. 12 are cc:stable and 14 are for MM.
There's a two-patch DAMON series from SeongJae Park which addresses a
missed check and possible memory leak. Apart from that it's all
singletons - please see the changelogs for details"
* tag 'mm-hotfixes-stable-2025-10-22-12-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
csky: abiv2: adapt to new folio flags field
mm/damon/core: use damos_commit_quota_goal() for new goal commit
mm/damon/core: fix potential memory leak by cleaning ops_filter in damon_destroy_scheme
hugetlbfs: move lock assertions after early returns in huge_pmd_unshare()
vmw_balloon: indicate success when effectively deflating during migration
mm/damon/core: fix list_add_tail() call on damon_call()
mm/mremap: correctly account old mapping after MREMAP_DONTUNMAP remap
mm: prevent poison consumption when splitting THP
ocfs2: clear extent cache after moving/defragmenting extents
mm: don't spin in add_stack_record when gfp flags don't allow
dma-debug: don't report false positives with DMA_BOUNCE_UNALIGNED_KMALLOC
mm/damon/sysfs: dealloc commit test ctx always
mm/damon/sysfs: catch commit test ctx alloc failure
hung_task: fix warnings caused by unaligned lock pointers
