94deaf69dc
447 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Praveen Talari
|
59bbe86bb2
|
soc: qcom: geni-se: Add SPI Device mode support for GENI based QuPv3
Add device mode supported registers and masks. Signed-off-by: Praveen Talari <quic_ptalari@quicinc.com> Reviewed-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com> Link: https://lore.kernel.org/r/20230714042203.14251-2-quic_ptalari@quicinc.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Konrad Dybcio
|
e1e1267413 |
clk: qcom: smd-rpm: Move some RPM resources to the common header
In preparation for handling the bus clocks in the icc driver, carve out some defines and a struct definition to the common rpm header. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Acked-by: Georgi Djakov <djakov@kernel.org> Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-4-09c78c175546@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> |
||
|
Konrad Dybcio
|
82a793e2d3 |
soc: qcom: smd-rpm: Use tabs for defines
Use tabs for defines to make things spaced consistently. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Acked-by: Georgi Djakov <djakov@kernel.org> Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-3-09c78c175546@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> |
||
|
Konrad Dybcio
|
cb0116090e |
soc: qcom: smd-rpm: Add QCOM_SMD_RPM_STATE_NUM
Add a preprocessor define to indicate the number of RPM contexts/states. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Acked-by: Georgi Djakov <djakov@kernel.org> Link: https://lore.kernel.org/r/20230526-topic-smd_icc-v7-2-09c78c175546@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> |
||
|
Stephan Gerhold
|
4dbb9e2322 |
soc: qcom: smem: Add qcom_smem_is_available()
Avoid having to look up a dummy item from SMEM to detect if it is already available or if we need to defer probing. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-7-a07dcdefd918@gerhold.net Signed-off-by: Bjorn Andersson <andersson@kernel.org> |
||
|
Linus Torvalds
|
bf1fa6f155 |
ARM: SoC changes for 6.5
These are mostly minor cleanups and bugfixes that address harmless problems. The largest branch is a conversion of the omap platform to use GPIO descriptors throughout the tree, for any devices that are not fully converted to devicetree. The Samsung Exynos platform gains back support for the Exynos4212 chip that was previously unused and removed but is now used for the Samsung Galaxy Tab3. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmScsH8ACgkQYKtH/8kJ UicTOhAAxQB1zySNJ4vOwTnV9Mrey+b/1RvjKDwZAa3uuP6vgpPjAjqVxlRxl+TM SWal+0zzj+vrFTkTl0niT+DzMFOEnLqhBd7smN8YKmC+hD3t9g5Dos7Q/IsUVlrT SnXDmit+eSI2QXFeO1OM0LdmniLDcKydsQ8o4beKF6YaJRGYACNSmtIjB3KvWccv 3cQXoaqN5rFoQxbLiGVINVyDU3Qpie2m8RqUcVWSmva46UM2yDAUWXwFNxcP8jXp WjL+NaiH7Ea/pzPcn3895u5ybIOZSylxLGRzL1ktewJqczUKf701qVZbf6enZp99 SbEQQh4DKm4DkpQ/JdPoO9x3InORAGUQ1p0Ssa92rKuiEVSXsQUeO3BNAYGfvpy3 o3QElSp6hlDWOHk9KawHzY3lfMsvKnTckFQDZxMbvC0+tQj6cDIM/qWo74CdZ07S UxVa1C9L2Lerv6IAG3v2meI9HjBn7DInWjfOAOxj2gX/ryIrdX9lO0692n6nVYca szH3CANjwPCPrtjAE2RXPjLTK+6nmQDavcEVEiG1SoGTplLh7RZgeQXV+5iIaOLp Nc8MDddR656kPBEprgoEugGZuLjsY2IGaLj+FNGriOEBKo5jpfEFeRQ2GPKxoyWR OHeWtxcFtBc2SnfVOtdMQ/X3UZTd4vlJYbNffiL+2NSM0iMBbHs= =z6FU -----END PGP SIGNATURE----- Merge tag 'soc-arm-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC updates from Arnd Bergmann: "These are mostly minor cleanups and bugfixes that address harmless problems. The largest branch is a conversion of the omap platform to use GPIO descriptors throughout the tree, for any devices that are not fully converted to devicetree. The Samsung Exynos platform gains back support for the Exynos4212 chip that was previously unused and removed but is now used for the Samsung Galaxy Tab3" * tag 'soc-arm-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits) ARM: omap2: Fix copy/paste bug MAINTAINERS: Replace my email address Input: ads7846 - fix pointer cast warning Input: ads7846 - Fix usage of match data ARM: omap2: Fix checkpatch issues arm: omap1: replace printk() with pr_err macro ARM: omap: Fix checkpatch issues ARM: s3c: Switch i2c drivers back to use .probe() ARM: versatile: mark mmc_status() static ARM: spear: include "pl080.h" for pl080_get_signal() prototype ARM: sa1100: address missing prototype warnings ARM: pxa: fix missing-prototypes warnings ARM: orion5x: fix d2net gpio initialization ARM: omap2: fix missing tick_broadcast() prototype ARM: omap1: add missing include ARM: lpc32xx: add missing include ARM: imx: add missing include ARM: highbank: add missing include ARM: ep93xx: fix missing-prototype warnings ARM: davinci: fix davinci_cpufreq_init() declaration ... |
||
|
Linus Torvalds
|
e4c8d01865 |
ARM: SoC drivers for 6.5
Nothing surprising in the SoC specific drivers, with the usual updates:
* Added or improved SoC driver support for Tegra234, Exynos4121, RK3588,
as well as multiple Mediatek and Qualcomm chips
* SCMI firmware gains support for multiple SMC/HVC transport and version
3.2 of the protocol
* Cleanups amd minor changes for the reset controller, memory controller,
firmware and sram drivers
* Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
amlogic and renesas SoC specific drivers
-----BEGIN PGP SIGNATURE-----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=zvLr
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Nothing surprising in the SoC specific drivers, with the usual
updates:
- Added or improved SoC driver support for Tegra234, Exynos4121,
RK3588, as well as multiple Mediatek and Qualcomm chips
- SCMI firmware gains support for multiple SMC/HVC transport and
version 3.2 of the protocol
- Cleanups amd minor changes for the reset controller, memory
controller, firmware and sram drivers
- Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
amlogic and renesas SoC specific drivers"
* tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (118 commits)
dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
MAINTAINERS: add PHY-related files to Amlogic SoC file list
drivers: meson: secure-pwrc: always enable DMA domain
tee: optee: Use kmemdup() to replace kmalloc + memcpy
soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer
dt-bindings: sram: qcom,imem: document qdu1000
soc: qcom: icc-bwmon: Fix MSM8998 count unit
dt-bindings: soc: qcom,rpmh-rsc: Require power-domains
soc: qcom: socinfo: Add Soc ID for IPQ5300
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300
soc: qcom: Fix a IS_ERR() vs NULL bug in probe
soc: qcom: socinfo: Add support for new fields in revision 19
soc: qcom: socinfo: Add support for new fields in revision 18
dt-bindings: firmware: scm: Add compatible for SDX75
soc: qcom: mdt_loader: Fix split image detection
dt-bindings: memory-controllers: drop unneeded quotes
soc: rockchip: dtpm: use C99 array init syntax
firmware: tegra: bpmp: Add support for DRAM MRQ GSCs
soc/tegra: pmc: Use devm_clk_notifier_register()
soc/tegra: pmc: Simplify debugfs initialization
...
|
||
|
Mark Brown
|
54e47eade7
|
Add Renesas PMIC RAA215300 and built-in RTC
Merge series from Biju Das <biju.das.jz@bp.renesas.com>: This patch series aims to add support for Renesas PMIC RAA215300 and built-in RTC found on this PMIC device. The details of PMIC can be found here[1]. Renesas PMIC RAA215300 exposes two separate i2c devices, one for the main device and another for rtc device. |
||
|
Arnd Bergmann
|
37d1fc51dd |
More Qualcomm driver updates for v6.5
The detection of split/non-split firmware files in the MDT loader is corrected. The Geni driver is updated to not enable unused interrupts, in some configurations. The count unit for MSM8998 in BWMON is corrected. RPM master stats driver is corrected to check for the right return value of devm_ioremap(). Support for socinfo version 18 and 19 are aded, and IPQ5300 is added to the list of platforms. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmSLPJsVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3Fc9AQAMvf/8aE2FyhH3LE9n1otbRa82Lv 5MjvAM9N6PUJgMSuA71lZm6Bh3h/3SpbGjuRGkfGi4ZpkjZiI37ButZQq8YKVcOi hDPjGiF8oiO1wk+JEwrC29jgpL+37T7/7jSynO2cYfu+uKXt3MhF9kmDeIiydjyf hpN6IhGuyLm+dx38x9Vzsq4ew4uFNos+zP0ZInScSJV8UQ5sJjUCjQ4FDu1bHoFn wQXa0Bd5ObYJilh71on9eJO7dQYLapv5omHI0lM04cYpYGfPpSTmXQwnbpmL7xqF dyLiE+eq6jpi5yWIVpEFFwonty7Ixuq4yuMwMafYVGIriQ8a8J56HvfvZQ2FSb7D 1F/Rx74qkx1LEenNOBM5rUFyIGc93Up19DzFPNBX/WjJW0+7yBlXNUsg/bI2a/xV Z+jURxcUWKa/ugiqjMZRXQ7VXC2uhrjD8xn22+w8eyziRoPPecq5KITizHv3CkOT G7AhI69nFn8zhXHJ3cp4ci4AWzOCW4HXnTE9H8XMDFcu6hxylJDovrqCtt0nWqg+ QPKSqVtUF7BX/UMhhE5XdxqkxG//MyMN2W4dowxv+u35+6DCydyEm3XFuD85ETnt YJx4iC5n8IGfb5jfOIyLK0JHQNU9ijPSd9rssLRebh96m4H0Op9gHlxDHyXghaRS umZA+uKoxQQZhEXn =KYPl -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSTWk8ACgkQYKtH/8kJ Uicu3hAAgerZS9Wdt+w+2cUhnkWWayByRwUmTvowFUR8vsbWLJVf1UwYQFiHVXhn BsPSSGWSRm3vyUZjZyv3GegoWLsxH3LD8s7QngjPpF75HI+2ekD8J+tLNRiNqPll /cZ1iQFVoTtfYUzAFpgBrYlFYV9P7B/6ghjEhuMc0HWLN4xFJ+13HL5NdCtvbDyn zTrBSDlz3j94+PoS6n/y+9r8nLNZyp5Li5FUEoXf7uABI9dUqWokoSDV1hRA7zeF MewEEcH7p5AZiL54L7cfLAlKwPQrUNYjerNxeljrwcp621wECniB030JmYKslSzS ccfracaf7EBqRuu4SYH47VeLadikpBxrjP39CJFAlKQhB2X3uUNrSYjLyTLDkRRA X/SN4sbm0ipToa6FlGJ68D3Ca+MHs541U6fhMgQuJ+S4D0pBjbmKUmQfs76L2Eu4 0ZDyYCQuJFmvd/P6ZKjX6hmkxDJ4OItop+K6doedAFf0/tAp6APry05aF56mbhDW tsBJ0ABlFNY73wMhSu7HMm2rB7mDl3LnVfv67HrWAzaB+c23rkUDki67a1Gtr3lV mG05JMSG2nETBRPv+II3pG/q7GzJwlqzHNxy3mwtBRILlzLjEl5fK+HgZRtGN8zr 7620aNOKR3lA7XGih1/ztlbpVqgH0c6Ahnm3pCHoQJJjMrK8oWI= =YKVY -----END PGP SIGNATURE----- Merge tag 'qcom-drivers-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers More Qualcomm driver updates for v6.5 The detection of split/non-split firmware files in the MDT loader is corrected. The Geni driver is updated to not enable unused interrupts, in some configurations. The count unit for MSM8998 in BWMON is corrected. RPM master stats driver is corrected to check for the right return value of devm_ioremap(). Support for socinfo version 18 and 19 are aded, and IPQ5300 is added to the list of platforms. * tag 'qcom-drivers-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer dt-bindings: sram: qcom,imem: document qdu1000 soc: qcom: icc-bwmon: Fix MSM8998 count unit dt-bindings: soc: qcom,rpmh-rsc: Require power-domains soc: qcom: socinfo: Add Soc ID for IPQ5300 dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300 soc: qcom: Fix a IS_ERR() vs NULL bug in probe soc: qcom: socinfo: Add support for new fields in revision 19 soc: qcom: socinfo: Add support for new fields in revision 18 dt-bindings: firmware: scm: Add compatible for SDX75 soc: qcom: mdt_loader: Fix split image detection Link: https://lore.kernel.org/r/20230615163104.1461905-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
aaeb1b6367 |
PMIC wrapper
- support companion device - add support for MT6795 SPMI: - add support for MT8186 SVS: - change gpu node name to match binding -----BEGIN PGP SIGNATURE----- iQJLBAABCAA1FiEEUdvKHhzqrUYPB/u8L21+TfbCqH4FAmSK6xwXHG1hdHRoaWFz LmJnZ0BnbWFpbC5jb20ACgkQL21+TfbCqH7XOg//cMmnV6P1Nfwiaf9id88Pudky wPRvKFzLGS9svznGexacOXZyUg7SDckaNoqEow4JLpO/SLdNdiDIQ17pj3g2txt0 4VCQOK/h2c6nfhYYcsSnekowuLyCivXKcp+25hZ1cORu+r48u028HdXZu/7P/6Xk l83xnETBIQIehlMerPRJ+tDhbEqc6yj6A277aqkrgCNm4ohWfUUQNPbjBSPHDW/7 ABd28KjY4ZkTAM88fRxjJS8JkXRC8CRMaBETH2MQjytXHqJ6oKe11o/cWNVII94f 4cwN6FMlKVcTC03CMEbo/l376xCgsrko+v3eREHaZuG+ESprJd8xOo/wTM4ESBN8 wFXCvjm8NlpaSZD00FayfQzprOHiK671T4p7ayeP3rcneI0/WRDCJTL20ngghcct 4ZGEvj7sK/oV7chTqt+PWAmBjrF7g4NwOR6Q5uPkcRkIn8d/dKnZh89ZFPt8/Ghi dAGrHyBJz2lwKwwH5WLgWhHRHkJk0f3UfoETbU/PvN9QWqnceH2zmx84Tv+IAb6K 1m8P7qqhlA4DatyW8dLwKXo+M70hD8vUcy7gDnPY0C8A6yRJNvmnN5Iny/bNUn2Z mUDfjC2Nh0p09Td39bL/uMawqkyokLOwnzWNkM+RS9GStzJbfXYAO0wrD+10f5zc 8HKg2/lBmNBthF0D2Cg= =ZMgG -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSTWfYACgkQYKtH/8kJ UifbLA//cJrJ9/aTffYlVjyaQyBHyzTLKN9REn844ERhSPeDcWOAcyfqMmcAoKgB rQTm6R+JOgldxI8FogcDbL44yAz+rw4fmnKCPhq5JDQbdDXA/KzTTCzIsN6Uukvr RykIMCOirCE68MjfOFmMQPM266AhW+2O/qTYTg7DiAcecA39DJRxZ2sNvUTbgA/R pDRnaAw1vphcghnhi3vyAKeJjPFC+M0VqX71aJAXPEeNKCu7sZDeIKZ4C0dcPrOX Rl6fzpHcciZ1amJx2aoj0wAqmu9RM9M4TdmEGWZvav3TzgMKgxd5EHcPI4Shqjmc ScxPcYNUc3cibUUix/5f+anuU+7Tf+SXi0T9VZU4lrAaXOdDk0z1rnnood1O34Yv iZXa0Qsb1irFhhgXwMQGwK9gR/LN9VFOSxVy9UZBMeP5RihiYCN+SmWrf+YHQlw3 iArLh18GX0ikN/SJvnqnYcHCALMWlQhdgHGR4jA5LgvbcPTt3NZH2y11aByK7Y2g fepcKV0nhinyR5fKhBimOqAHW3+gEFMXjqbzZ41nbcVKjiNXQTfi58mAh8n2jsBt 61B8PAQLowYKeZvKFbcnodWOg7bTSma91ca5JFK3nTd9ijeOhG4Iy0pLsN9/qxNP y6yyxy/PjCYeJnqkL+F2OustXwwxbED45CGNrz3fQ0+HtoJWE8A= =hwjN -----END PGP SIGNATURE----- Merge tag 'v6.4-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into soc/drivers PMIC wrapper - support companion device - add support for MT6795 SPMI: - add support for MT8186 SVS: - change gpu node name to match binding * tag 'v6.4-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: soc: mediatek: remove DDP_DOMPONENT_DITHER from enum soc: mediatek: SVS: Fix MT8192 GPU node name soc: mediatek: mtk-mutex: Remove unnecessary .owner dt-bindings: phy: mediatek,dsi-phy: Add compatible for MT6795 Helio X10 dt-bindings: pwm: Add compatible for MediaTek MT6795 dt-bindings: spmi: spmi-mtk-pmif: Document mediatek,mt8195-spmi as fallback of mediatek,mt8186-spmi soc: mediatek: pwrap: Add support for MT6795 Helio X10 soc: mediatek: mtk-pmic-wrap: Add support for MT6331 w/ MT6332 companion soc: mediatek: mtk-pmic-wrap: Add support for companion PMICs soc: mediatek: pwrap: Add kerneldoc for struct pwrap_slv_type soc: mediatek: pwrap: Move PMIC read test sequence in function dt-bindings: soc: mediatek: pwrap: Add compatible for MT6795 Helio X10 Link: https://lore.kernel.org/r/1ed1e5ae-6305-e63a-84a0-3c43f69c8f8b@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Naman Jain
|
d9c2a255cf |
soc: qcom: socinfo: Add support for new fields in revision 19
Add support for below fields coming in socinfo structure under v19: * num_func_clusters: number of clusters with at least one functional core * boot_cluster: cluster selected as boot cluster * boot_core: core selected as boot core While at it, rename some variables to align them with their functionalities. Signed-off-by: Naman Jain <quic_namajain@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230606134626.18790-3-quic_namajain@quicinc.com |
||
|
Naman Jain
|
158826c73d |
soc: qcom: socinfo: Add support for new fields in revision 18
Add support for below fields coming in socinfo structure under v18: * num_kvps: number of key value pairs (KVP) * kvps_offset: the offset of the KVP table from the base address of socinfo structure in SMEM KVP table has boolean values for certain feature flags, used to determine hardware configuration. Signed-off-by: Naman Jain <quic_namajain@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230606134626.18790-2-quic_namajain@quicinc.com |
||
|
Jason-JH.Lin
|
21d4631eed |
soc: mediatek: remove DDP_DOMPONENT_DITHER from enum
After mmsys and drm change DITHER enum to DDP_COMPONENT_DITHER0, mmsys header can remove the useless DDP_COMPONENT_DITHER enum. Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20230306080659.15261-3-jason-jh.lin@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> |
||
|
Vijaya Krishna Nivarthi
|
6d6e575949
|
soc: qcom: geni-se: Add interfaces geni_se_tx_init_dma() and geni_se_rx_init_dma()
The geni_se_xx_dma_prep() interfaces necessarily do DMA mapping before initiating DMA transfers. This is not suitable for spi where framework is expected to handle map/unmap. Expose new interfaces geni_se_xx_init_dma() which do only DMA transfer. Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/1684325894-30252-2-git-send-email-quic_vnivarth@quicinc.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Manivannan Sadhasivam
|
cbd77119b6 |
EDAC/qcom: Get rid of hardcoded register offsets
The LLCC EDAC register offsets varies between each SoC. Hardcoding the
register offsets won't work and will often result in crash due to
accessing the wrong locations.
Hence, get the register offsets from the LLCC driver matching the
individual SoCs.
Cc: <stable@vger.kernel.org> # 6.0: 5365cea199c7 ("soc: qcom: llcc: Rename reg_offset structs to reflect LLCC version")
Cc: <stable@vger.kernel.org> # 6.0: c13d7d261e36 ("soc: qcom: llcc: Pass LLCC version based register offsets to EDAC driver")
Cc: <stable@vger.kernel.org> # 6.0
Fixes: a6e9d7ef252c ("soc: qcom: llcc: Add configuration data for SM8450 SoC")
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230517114635.76358-3-manivannan.sadhasivam@linaro.org
|
||
|
Robert Marko
|
17051d2c3c |
soc: qcom: smem: introduce qcom_smem_get_soc_id()
Introduce a helper to return the SoC SMEM ID, which is used to identify the exact SoC model as there may be differences in the same SoC family. Currently, cpufreq-nvmem does this completely in the driver and there has been more interest expresed for other drivers to use this information so lets expose a common helper to prevent redoing it in individual drivers since this field is present on every SMEM table version. Signed-off-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230526204802.3081168-3-robimarko@gmail.com |
||
|
Robert Marko
|
ec001bb71e |
soc: qcom: socinfo: move SMEM item struct and defines to a header
Move SMEM item struct and related defines to a header in order to be able to reuse them in the SMEM driver instead of duplicating them. Signed-off-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230526204802.3081168-1-robimarko@gmail.com |
||
|
Arnd Bergmann
|
a9ae9c526c |
ARM: pxa: fix missing-prototypes warnings
The PXA platform has a number of configurations that end up with a warning like these when building with W=1: drivers/hwmon/max1111.c:83:5: error: no previous prototype for 'max1111_read_channel' [-Werror=missing-prototypes] arch/arm/mach-pxa/reset.c:86:6: error: no previous prototype for 'pxa_restart' [-Werror=missing-prototypes] arch/arm/mach-pxa/mfp-pxa2xx.c:254:5: error: no previous prototype for 'keypad_set_wake' [-Werror=missing-prototypes] drivers/clk/pxa/clk-pxa25x.c:70:14: error: no previous prototype for 'pxa25x_get_clk_frequency_khz' [-Werror=missing-prototypes] drivers/clk/pxa/clk-pxa25x.c:325:12: error: no previous prototype for 'pxa25x_clocks_init' [-Werror=missing-prototypes] drivers/clk/pxa/clk-pxa27x.c:74:14: error: no previous prototype for 'pxa27x_get_clk_frequency_khz' [-Werror=missing-prototypes] drivers/clk/pxa/clk-pxa27x.c:102:6: error: no previous prototype for 'pxa27x_is_ppll_disabled' [-Werror=missing-prototypes] drivers/clk/pxa/clk-pxa27x.c:470:12: error: no previous prototype for 'pxa27x_clocks_init' [-Werror=missing-prototypes] arch/arm/mach-pxa/pxa27x.c:44:6: error: no previous prototype for 'pxa27x_clear_otgph' [-Werror=missing-prototypes] arch/arm/mach-pxa/pxa27x.c:58:6: error: no previous prototype for 'pxa27x_configure_ac97reset' [-Werror=missing-prototypes] arch/arm/mach-pxa/spitz_pm.c:170:15: error: no previous prototype for 'spitzpm_read_devdata' [-Werror=missing-prototypes] The problem is that there is a declaration for each of these, but it's only seen by the caller and not the callee. Moving these into appropriate header files ensures that both use the same calling conventions and it avoids the warnings. Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20230516153109.514251-11-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Linus Torvalds
|
6e98b09da9 |
Networking changes for 6.4.
Core
----
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances.
- Reduce compound page head access for zero-copy data transfers.
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible.
- Threaded NAPI improvements, adding defer skb free support and unneeded
softirq avoidance.
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking.
- Add lockless accesses annotation to sk_err[_soft].
- Optimize again the skb struct layout.
- Extends the skb drop reasons to make it usable by multiple
subsystems.
- Better const qualifier awareness for socket casts.
BPF
---
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and variable-sized
accesses.
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward.
- Add more precise memory usage reporting for all BPF map types.
- Adds support for using {FOU,GUE} encap with an ipip device operating
in collect_md mode and add a set of BPF kfuncs for controlling encap
params.
- Allow BPF programs to detect at load time whether a particular kfunc
exists or not, and also add support for this in light skeleton.
- Bigger batch of BPF verifier improvements to prepare for upcoming BPF
open-coded iterators allowing for less restrictive looping capabilities.
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF
programs to NULL-check before passing such pointers into kfunc.
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in
local storage maps.
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps.
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree.
- Add BPF verifier support for ST instructions in convert_ctx_access()
which will help new -mcpu=v4 clang flag to start emitting them.
- Add ARM32 USDT support to libbpf.
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations.
Protocols
---------
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address.
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition.
- Add the handshake upcall mechanism, allowing the user-space
to implement generic TLS handshake on kernel's behalf.
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures.
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers.
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction.
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore.
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter
---------
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged.
- Update bridge netfilter and ovs conntrack helpers to handle
IPv6 Jumbo packets properly, i.e. fetch the packet length
from hop-by-hop extension header. This is needed for BIT TCP
support.
- The iptables 32bit compat interface isn't compiled in by default
anymore.
- Move ip(6)tables builtin icmp matches to the udptcp one.
This has the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used.
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device.
Driver API
----------
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time.
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them.
- Allow the page_pool to directly recycle the pages from safely
localized NAPI.
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization.
- Add YNL support for user headers and struct attrs.
- Add partial YNL specification for devlink.
- Add partial YNL specification for ethtool.
- Add tc-mqprio and tc-taprio support for preemptible traffic classes.
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device.
- Add basic LED support for switch/phy.
- Add NAPI documentation, stop relaying on external links.
- Convert dsa_master_ioctl() to netdev notifier. This is a preparatory
work to make the hardware timestamping layer selectable by user
space.
- Add transceiver support and improve the error messages for CAN-FD
controllers.
New hardware / drivers
----------------------
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers
-------
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors.
- add support for configuring max SDU for each Tx queue.
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only
on shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll.
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates.
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices
(e.g. MAC address from efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmRI/mUSHHBhYmVuaUBy
ZWRoYXQuY29tAAoJECkkeY3MjxOkgO0QAJGxpuN67YgYV0BIM+/atWKEEexJYG7B
9MMpU4jMO3EW/pUS5t7VRsBLUybLYVPmqCZoHodObDfnu59jiPOegb6SikJv/ZwJ
Zw62PVk5MvDnQjlu4e6kDcGwkplteN08TlgI+a49BUTedpdFitrxHAYGW8f2fRO6
cK2XSld+ZucMoym5vRwf8yWS1BwdxnslPMxDJ+/8ZbWBZv44qAnG2vMB/kIx7ObC
Vel/4m6MzTwVsLYBsRvcwMVbNNlZ9GuhztlTzEbfGA4ZhTadIAMgb5VTWXB84Ws7
Aic5wTdli+q+x6/2cxhbyeoVuB9HHObYmLBAciGg4GNljP5rnQBY3X3+KVZ/x9TI
HQB7CmhxmAZVrO9pLARFV+ECrMTH2/dy3NyrZ7uYQ3WPOXJi8hJZjOTO/eeEGL7C
eTjdz0dZBWIBK2gON/6s4nExXVQUTEF2ZsPi52jTTClKjfe5pz/ddeFQIWaY1DTm
pInEiWPAvd28JyiFmhFNHsuIBCjX/Zqe2JuMfMBeBibDAC09o/OGdKJYUI15AiRf
F46Pdb7use/puqfrYW44kSAfaPYoBiE+hj1RdeQfen35xD9HVE4vdnLNeuhRlFF9
aQfyIRHYQofkumRDr5f8JEY66cl9NiKQ4IVW1xxQfYDNdC6wQqREPG1md7rJVMrJ
vP7ugFnttneg
=ITVa
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances
- Reduce compound page head access for zero-copy data transfers
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
possible
- Threaded NAPI improvements, adding defer skb free support and
unneeded softirq avoidance
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking
- Add lockless accesses annotation to sk_err[_soft]
- Optimize again the skb struct layout
- Extends the skb drop reasons to make it usable by multiple
subsystems
- Better const qualifier awareness for socket casts
BPF:
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and
variable-sized accesses
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward
- Add more precise memory usage reporting for all BPF map types
- Adds support for using {FOU,GUE} encap with an ipip device
operating in collect_md mode and add a set of BPF kfuncs for
controlling encap params
- Allow BPF programs to detect at load time whether a particular
kfunc exists or not, and also add support for this in light
skeleton
- Bigger batch of BPF verifier improvements to prepare for upcoming
BPF open-coded iterators allowing for less restrictive looping
capabilities
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce
BPF programs to NULL-check before passing such pointers into kfunc
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
in local storage maps
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree
- Add BPF verifier support for ST instructions in
convert_ctx_access() which will help new -mcpu=v4 clang flag to
start emitting them
- Add ARM32 USDT support to libbpf
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations
Protocols:
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition
- Add the handshake upcall mechanism, allowing the user-space to
implement generic TLS handshake on kernel's behalf
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter:
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged
- Update bridge netfilter and ovs conntrack helpers to handle IPv6
Jumbo packets properly, i.e. fetch the packet length from
hop-by-hop extension header. This is needed for BIT TCP support
- The iptables 32bit compat interface isn't compiled in by default
anymore
- Move ip(6)tables builtin icmp matches to the udptcp one. This has
the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device
Driver API:
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them
- Allow the page_pool to directly recycle the pages from safely
localized NAPI
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization
- Add YNL support for user headers and struct attrs
- Add partial YNL specification for devlink
- Add partial YNL specification for ethtool
- Add tc-mqprio and tc-taprio support for preemptible traffic classes
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device
- Add basic LED support for switch/phy
- Add NAPI documentation, stop relaying on external links
- Convert dsa_master_ioctl() to netdev notifier. This is a
preparatory work to make the hardware timestamping layer selectable
by user space
- Add transceiver support and improve the error messages for CAN-FD
controllers
New hardware / drivers:
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers:
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors
- add support for configuring max SDU for each Tx queue
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only on
shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices (e.g. MAC address from
efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support"
* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
net: phy: hide the PHYLIB_LEDS knob
net: phy: marvell-88x2222: remove unnecessary (void*) conversions
tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
net: amd: Fix link leak when verifying config failed
net: phy: marvell: Fix inconsistent indenting in led_blink_set
lan966x: Don't use xdp_frame when action is XDP_TX
tsnep: Add XDP socket zero-copy TX support
tsnep: Add XDP socket zero-copy RX support
tsnep: Move skb receive action to separate function
tsnep: Add functions for queue enable/disable
tsnep: Rework TX/RX queue initialization
tsnep: Replace modulo operation with mask
net: phy: dp83867: Add led_brightness_set support
net: phy: Fix reading LED reg property
drivers: nfc: nfcsim: remove return value check of `dev_dir`
net: phy: dp83867: Remove unnecessary (void*) conversions
net: ethtool: coalesce: try to make user settings stick twice
net: mana: Check if netdev/napi_alloc_frag returns single page
net: mana: Rename mana_refill_rxoob and remove some empty lines
net: veth: add page_pool stats
...
|
||
|
Arnd Bergmann
|
4f2f299136 |
mtk-svs:
smaller coding style changes mtk-mutex: - add support for mt8365 display and mt8195 VPP mutex - add support for more then 32 mods - use module_platform_driver instead of open coding mtk-mmsys: - add support for mt8195 RSZ switching - add remove function - use module_platform_driver instead of open coding - split out mt8173 routing table from the legacy table - bump up resets in mt8173 to 64 - add support for mt6795 (Helio X10) - clean-up IS_REACHABLE code for cmdq -----BEGIN PGP SIGNATURE----- iQJLBAABCAA1FiEEUdvKHhzqrUYPB/u8L21+TfbCqH4FAmQ5etYXHG1hdHRoaWFz LmJnZ0BnbWFpbC5jb20ACgkQL21+TfbCqH60MQ/9Ec3yNtE/28VGYD0IgG8i7KZx d8+dfB2WUqEWGdkPVIrVESH9GcYn6TxoFXEvJScE9kKEDQzt8YQQ6eM+Pb1X7UIo g2ygE3y7mGD4L1yXWtJbfA9C4m2hxe0bcFPHY/JcI5VCafcg/enVlU32JytJF/6J BTDUSCj1on84FguS8o1UbB+gEJC7cPTxWL0VCL1ALdS4tR5Ll1GD1oC6HFI8L7Ii khmE+kP7bwwzotd2UYlFwpV36GDuKGAe39oPEpVL5GzRZlVIterwd1+TLU7U3AUo IkvPEzmWIgitOdXQ/NA0XnUrLuPc4zLqWXORGnlrNajuHXxllLqkJv+o8iojWhEH ThwRtg9kQoSkqwui33ugS5zpvBjT/l6cKbzfN9b5lBaNxoAoBItr1lvp75AIdZ94 LIuLTzOa/2ah+Gte8lKcHplPK6so9PU+hZAaKSuGM1d5fxD/osHzKLHTp0IBh+L2 xuXW6XRU0kadh2D7gHbwXpRO+46u9HZ1yQ4Fcpm/r15n/Yqb/nfSFUBOgw9IY7sX jPO1LhzJE0C1eQ0ILVKFKH/X4+BCEVvqscOPPRWO5PVPfU/90rNAFIFmI4b3VQAv rqkgbgFE0zfB18Zg5P4e98fpg3h4iiwxZf3MY0mvVT03lCf43bP314rCtAzBXy1O ANukrL889xT146Ut4rA= =8k5F -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmQ5uh8ACgkQYKtH/8kJ UicW9RAAiOpQFZTsFzSZ5jryRFV2Wd9Z8eQt1f8xhfgRXylw5jvvIwpZEe01ebtR g59nGQBTMOTo78NRvrhEm1Dpa3uzcJpY4NBpvFu8UlU+kr9oCMk8OkEitWw6rrwX oUUUgSwcs5afJ5gJVojzRIWjNL4/0FWQc4XHp6FV/K2igo0BsX25z+JK+3kpMvkO 8M9fptqlR25hanXhkE8d7VtksEJPRnQOuw6aydQa3oJoBt64YYwTnDAuw6WQzjFM G800rFCrfhUve6hSQwy0amd9zzuql+e9nYo3NN3ZAzs4kKqLifaPTWue2TJ2dKXO FGKYa/LAyKUgkbplR5uuKtTjOem2FU1ePJpsLtF5hO7S1ZOyOFJLGtz7MJQoROSr vX+OPwRfJzndebxEQAYaFyeA3LKqsxHcotlU0tqHzl2dZz5g1FRlEnRDIYHKOtOt u0gpt4N4xfXxQeSmkuYHtILp/hRQM8Djf61riiFR5jxG9v4JaVdrl8K6qfyc5tJt d4ytn8a/kf1sHKwmzplidOjJ5Ih1qgmIfez6VCEr5H5WD2ZQfQQSnychhb91SJEM x/MigLinAMcg9gpTO6RVlK9jAOO0LhvrbQcWH2oWYbezfgXeVvDZuwKV8gqCRCaG PaqXaFDr4L48zov7jfYUoK0Mdbq27PcHAMLSnDSxpXhT7n+wCjE= =DkhA -----END PGP SIGNATURE----- Merge tag 'v6.3-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into soc/drivers mtk-svs: smaller coding style changes mtk-mutex: - add support for mt8365 display and mt8195 VPP mutex - add support for more then 32 mods - use module_platform_driver instead of open coding mtk-mmsys: - add support for mt8195 RSZ switching - add remove function - use module_platform_driver instead of open coding - split out mt8173 routing table from the legacy table - bump up resets in mt8173 to 64 - add support for mt6795 (Helio X10) - clean-up IS_REACHABLE code for cmdq * tag 'v6.3-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (25 commits) soc: mediatek: Kconfig: Add MTK_CMDQ dependency to MTK_MMSYS soc: mediatek: mutex: Use dev_err_probe() soc: mediatek: mtk-mmsys: Add support for MT6795 Helio X10 soc: mediatek: mtk-mmsys: Change MT8173 num_resets to 64 soc: mediatek: mtk-mmsys: Split out MT8173 mmsys DDP routing table soc: mediatek: Cleanup ifdefs for IS_REACHABLE(CONFIG_MTK_CMDQ) soc: mediatek: cmdq: Add inline functions for !CONFIG_MTK_CMDQ soc: mediatek: mtk-mutex: Use module_platform_driver() macro soc: mediatek: mtk-mutex: Replace max handles number with definition soc: mediatek: mtk-mutex: Compress of_device_id array entries soc: mediatek: mtk-mmsys: Add MODULE_DEVICE_TABLE() to allow auto-load soc: mediatek: mtk-mmsys: Compress of_device_id array entries soc: mediatek: mtk-mmsys: Use module_platform_driver() macro soc: mediatek: mtk-mmsys: Add .remove() callback dt-bindings: soc: mediatek: add display mutex for MT8365 SoC dt-bindings: soc: mediatek: specify which compatible requires clocks property soc: mediatek: mtk-svs: add thermal voltage compensation if needed soc: mediatek: mtk-svs: fix passing zero to 'PTR_ERR' soc: mediatek: mtk-svs: delete node name check soc: mediatek: mutex: support MT8195 VPPSYS ... Link: https://lore.kernel.org/r/bc9f7a74-ce12-b323-021c-ff2c0473e979@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Felix Fietkau
|
05f3ab7780 |
net: ethernet: mtk_eth_soc: add code for offloading flows from wlan devices
WED version 2 (on MT7986 and later) can offload flows originating from wireless devices. In order to make that work, ndo_setup_tc needs to be implemented on the netdevs. This adds the required code to offload flows coming in from WED, while keeping track of the incoming wed index used for selecting the correct PPE device. Signed-off-by: Felix Fietkau <nbd@nbd.name> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
AngeloGioacchino Del Regno
|
eb0d8623b9 |
soc: mediatek: cmdq: Add inline functions for !CONFIG_MTK_CMDQ
In preparation for a cleanup of ifdef instances of IS_REACHABLE() for the CONFIG_MTK_CMDQ configuration option, add inline functions that will either return a failure or, for void functions, do nothing. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20230222094253.23678-9-angelogioacchino.delregno@collabora.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> |
||
|
Manivannan Sadhasivam
|
ee13b50087 |
qcom: llcc/edac: Fix the base address used for accessing LLCC banks
The Qualcomm LLCC/EDAC drivers were using a fixed register stride for accessing the (Control and Status Registers) CSRs of each LLCC bank. This stride only works for some SoCs like SDM845 for which driver support was initially added. But the later SoCs use different register stride that vary between the banks with holes in-between. So it is not possible to use a single register stride for accessing the CSRs of each bank. By doing so could result in a crash. For fixing this issue, let's obtain the base address of each LLCC bank from devicetree and get rid of the fixed stride. This also means, there is no need to rely on reg-names property and the base addresses can be obtained using the index. First index is LLCC bank 0 and last index is LLCC broadcast. If the SoC supports more than one bank, then those need to be defined in devicetree for index from 1..N-1. Reported-by: Parikshit Pareek <quic_ppareek@quicinc.com> Tested-by: Luca Weiss <luca.weiss@fairphone.com> Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230314080443.64635-13-manivannan.sadhasivam@linaro.org |
||
|
Visweswara Tanuku
|
fe8aa1ba07 |
soc: qcom: geni-se: Update Tx and Rx fifo depth based on QUP HW version
From QUP HW Version 3.10 and above the Tx and Rx fifo depth bits are increased to 23:16 bits from 21:16 bits in SE_HW_PARAM registers accomodating 256bytes of fifo depth. Updated geni_se_get_tx_fifo_depth and geni_se_get_rx_fifo_depth to retrieve right fifo depth based on QUP HW version. Signed-off-by: Visweswara Tanuku <quic_vtanuku@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230215050528.9507-1-quic_vtanuku@quicinc.com |
||
|
Roy-CW.Yeh
|
549053b69c |
soc: mediatek: mutex: support MT8195 VPPSYS
Add MT8195 VPPSYS0 and VPPSYS1 mutex info to driver data Signed-off-by: Roy-CW.Yeh <roy-cw.yeh@mediatek.com> Signed-off-by: Moudy Ho <moudy.ho@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Change-Id: Ie371dc9dcf35ea308d9460acd60fb9c3d6475deb Link: https://lore.kernel.org/r/20230206091109.1324-7-moudy.ho@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> |
||
|
Roy-CW.Yeh
|
dd4f373ef9 |
soc: mediatek: mmsys: add config api for RSZ switching and DCM
Due to MT8195 HW design, some RSZs have additional settings that need to be configured in MMSYS. Signed-off-by: Roy-CW.Yeh <roy-cw.yeh@mediatek.com> Signed-off-by: Moudy Ho <moudy.ho@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Change-Id: I41978bf14951221c88abbe70d8c24cb0770e11e3 Link: https://lore.kernel.org/r/20230206091109.1324-5-moudy.ho@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> |
||
|
Linus Torvalds
|
11c7052998 |
ARM: SoC drivers for 6.3
As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmPtSN8ACgkQmmx57+YA
GNkOSw/+JS5tElm/ZP7c3uWYp6uwvcb0jUlKW/U3aCtPiPEcYDLEqIEXwcNdaDMh
m4rW3GYlW0IRL3FsyuYkSLx+EIIUIfs40wldYXJOqRDj0XasndiloIwltOQJGfd9
C/UVM0FpJdxMJrcBMFgwLLQCIbAVnhHP34i6ppDRgxW/MfTeiCaaG6fnS70iv6mC
oh2N7FoZSKDtTrFtlR5TqFiK5v/W1CgNJVuglkFB0ceFpjyBpp/8AT0FGS887xCz
IYSTqm4Q/79vaZXI1Y2oog257cgdwsVqgPrnK5CuSFhTnAcJMCekiFelHq8Yhyuk
Rw7j/B3KO3AOaxmR75c6SZdeZ+VHgUMRC/RKe3fay0sm3Zea2kAIPXA6Zn+r/cxb
8M94V59qBz+f8XmpXRTK1UR3s3EbwFIuNyuDIkeorMtpSKtvqJXmZxGDwNIfXr2F
/voo++MKjzdtdxdW/D/5Tc9DC0Pyb4HLi0EYj2QCzA03njmfLDF1w73NfzMec+GD
R1zAd3FEbiJQx8Hin0PSPjYXpfMnkjkGAEcE9N9Ralg4ewNWAxfOFsAhHKTZNssL
pitTAvHR/+dXtvkX7FUi2l/6fqn8nJUrg/xRazPPp3scRbpuk8m6P4MNr3/lsaHk
HTQ/hYwDdecWLvKXjw5y9yIr3yhLmPPcloTVIIFFjsM0t8b+d9E=
=p6Xp
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv"
* tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
power: supply: Introduce Qualcomm PMIC GLINK power supply
soc: apple: rtkit: Do not copy the reg state structure to the stack
soc: sunxi: SUN20I_PPU should depend on PM
memory: renesas-rpc-if: Remove redundant division of dummy
soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
MAINTAINERS: Update qcom CPR maintainer entry
dt-bindings: firmware: document Qualcomm SM8550 SCM
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
soc: qcom: socinfo: Add support for new field in revision 17
soc: qcom: smd-rpm: Add IPQ9574 compatible
soc: qcom: pmic_glink: remove redundant calculation of svid
soc: qcom: stats: Populate all subsystem debugfs files
dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
soc: qcom: pmic_glink: Introduce altmode support
...
|
||
|
Linus Torvalds
|
1ec35eadc3 |
We have one small patch to the clk core this time around. It fixes a corner
case with the CLK_OPS_PARENT_ENABLE flag combined with clk_core_is_enabled()
where it hangs the system. We'll simply assume the clk is disabled if the
parent is disabled and the flag is set. Trying to turn on the parent to check
the enable state of the clk runs into system hangs at boot. We let this bake in
-next for a couple weeks to make sure there aren't any more issues because the
last attempt to fix this ran into hangs and had to be reverted.
Note: There were some more patches to the core framework around sync_state and
disabling unused clks, but I asked for that to be reverted from the qcom PR
because it isn't ready and we're still discussing the best solution on the
list.
Outside of the core clk framework, we have the usual collection of clk driver
updates and support for new SoCs (which seems to never stop). The dirstat is
dominated by Qualcomm because they added support for quite a few SoCs this time
around and also migrated quite a few of their drivers to clk_parent_data. The
other big diff is in the Mediatek clk drivers that saw a significant rework
this cycle to similarly modernize the code, and we'll see that work continue in
the next cycle as well. Nothing really jumps out as scary here, except that the
significant churn in parent data descriptions can have typos that go unnoticed.
More details below.
Core:
- Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()
New Drivers:
- Add a new clk-gpr-mux clock type and use it on i.MX6Q to add ENET ref
clocks
- Support for Mediatek MT7891 SoC clks
- Support for many Qualcomm clk controllers:
- QDU1000/QRU1000 global clock controller
- SA8775P global clock controller
- SM8550 TCSR and display clock controller
- SM6350 clock controller
- MSM8996 CBF and APCS clock controllers
Updates:
- Various cleanups and improvements to Mediatek clk drivers to reduce
code size and modernize the drivers
- Support for Versa 5P49V60 clks
- Disable R-Car H3 ES1.*, as it was only available to an internal
development group and needed a lot of quirks and workarounds
- Add PWM, Compare-Match Timer (TIM), USB, SDHI, and eMMC clocks and
resets on Renesas RZ/V2M
- Add display clocks on Renesas R-Car V4H
- Add Camera Receiving Unit (CRU) clocks and resets on Renesas RZ/G2L
- Free the imx_uart_clocks even if imx_register_uart_clocks returns early
- Get the stdout clocks count from device tree on i.MX
- Drop the clock count argument from imx_register_uart_clocks()
- Keep the uart clocks on i.MX93 for when earlycon is used
- Fix SPDX comment in i.MX6SLL clocks bindings header
- Drop some unnecessary spaces from i.MX8ULP clocks bindings header
- Add imx_obtain_fixed_of_clock() for allowing to add a clock that is
not configured via devicetree
- Fix the ENET1 gate configuration for i.MX6UL according to the
reference manual
- Add ENET refclock mux support for i.MX6UL
- Add support for USB host/device configuration on Renesas RZ/N1
- Add PLL2 programming support, and CAN-FD clocks on Renesas R-Car V4H
- Add D1 CAN bus gates and resets for Allwinner
- Mark D1 CPUX clock as critical on Allwinner
- Reuse D1 driver for Allwinner R528/T113
- Cleanup sunxi-ng Kconfig
- Fix sunxi-ng kernel-doc issues
- Model Allwinner H3/H5 DRAM clock as fixed clock
- Use .determine_rate() instead of .round_rate() for the dualdiv, mpll,
sclk-div and cpu-dyn-div amlogic clock drivers
- DDR clocks were marked as critical in the proper clock driver for each
AT91 SoC such that drivers/memory/atmel-sdramc.c to be deleted
in the next releases as it only does clock enablement
- Patch to avoid compiling dt-compat.o for all AT91 SoCs as only some of
them may use it
- Support synchronous power_off requests in the qcom GDSC driver for proper
GPU power collapse
- Drop test clocks from various Qualcomm clk drivers
- Update parent references to use clk_parent_data/clk_hw in various Qualcomm clk drivers
- Fixes for the Qualcomm MSM8996 CPU clock controller
- Transition Qualcomm MSM8974 GCC off the externally defined sleep_clk
- Add GDSCs in the global clock controller for Qualcomm QCS404
- The SDCC core clocks on Qualcomm SM6115 are moved to floor_ops
- Programming of clk_dis_wait for GPU CX GDSC on Qualcomm SC7180 and SDM845 are
moved to use the recently introduced properties in the GDSC struct
- Qualcomm's RPMh clock driver gains SM8550 and SA8775P clocks, and the IPA clock
is added on a variety of platforms
- De-duplicate identical clks in Qualcomm SMD RPM clk driver
- Add a few missing clocks across msm8998, msm8992, msm8916, qcs404 to
Qualcomm SDM RPM clk driver
- Various Qualcomm clk drivers use devm_pm_runtime_enable() to simplify
-----BEGIN PGP SIGNATURE-----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=Fle/
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"We have one small patch to the clk core this time around. It fixes a
corner case with the CLK_OPS_PARENT_ENABLE flag combined with
clk_core_is_enabled() where it hangs the system. We'll simply assume
the clk is disabled if the parent is disabled and the flag is set.
Trying to turn on the parent to check the enable state of the clk runs
into system hangs at boot. We let this bake in -next for a couple
weeks to make sure there aren't any more issues because the last
attempt to fix this ran into hangs and had to be reverted.
Note: There were some more patches to the core framework around
sync_state and disabling unused clks, but I asked for that to be
reverted from the qcom PR because it isn't ready and we're still
discussing the best solution on the list.
Outside of the core clk framework, we have the usual collection of clk
driver updates and support for new SoCs (which seems to never stop).
The dirstat is dominated by Qualcomm because they added support for
quite a few SoCs this time around and also migrated quite a few of
their drivers to clk_parent_data. The other big diff is in the
Mediatek clk drivers that saw a significant rework this cycle to
similarly modernize the code, and we'll see that work continue in the
next cycle as well. Nothing really jumps out as scary here, except
that the significant churn in parent data descriptions can have typos
that go unnoticed. More details below.
Core:
- Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()
New Drivers:
- Add a new clk-gpr-mux clock type and use it on i.MX6Q to add ENET
ref clocks
- Support for Mediatek MT7891 SoC clks
- Support for many Qualcomm clk controllers:
- QDU1000/QRU1000 global clock controller
- SA8775P global clock controller
- SM8550 TCSR and display clock controller
- SM6350 clock controller
- MSM8996 CBF and APCS clock controllers
Updates:
- Various cleanups and improvements to Mediatek clk drivers to reduce
code size and modernize the drivers
- Support for Versa 5P49V60 clks
- Disable R-Car H3 ES1.*, as it was only available to an internal
development group and needed a lot of quirks and workarounds
- Add PWM, Compare-Match Timer (TIM), USB, SDHI, and eMMC clocks and
resets on Renesas RZ/V2M
- Add display clocks on Renesas R-Car V4H
- Add Camera Receiving Unit (CRU) clocks and resets on Renesas RZ/G2L
- Free the imx_uart_clocks even if imx_register_uart_clocks returns
early
- Get the stdout clocks count from device tree on i.MX
- Drop the clock count argument from imx_register_uart_clocks()
- Keep the uart clocks on i.MX93 for when earlycon is used
- Fix SPDX comment in i.MX6SLL clocks bindings header
- Drop some unnecessary spaces from i.MX8ULP clocks bindings header
- Add imx_obtain_fixed_of_clock() for allowing to add a clock that is
not configured via devicetree
- Fix the ENET1 gate configuration for i.MX6UL according to the
reference manual
- Add ENET refclock mux support for i.MX6UL
- Add support for USB host/device configuration on Renesas RZ/N1
- Add PLL2 programming support, and CAN-FD clocks on Renesas R-Car
V4H
- Add D1 CAN bus gates and resets for Allwinner
- Mark D1 CPUX clock as critical on Allwinner
- Reuse D1 driver for Allwinner R528/T113
- Cleanup sunxi-ng Kconfig
- Fix sunxi-ng kernel-doc issues
- Model Allwinner H3/H5 DRAM clock as fixed clock
- Use .determine_rate() instead of .round_rate() for the dualdiv,
mpll, sclk-div and cpu-dyn-div amlogic clock drivers
- DDR clocks were marked as critical in the proper clock driver for
each AT91 SoC such that drivers/memory/atmel-sdramc.c to be deleted
in the next releases as it only does clock enablement
- Patch to avoid compiling dt-compat.o for all AT91 SoCs as only some
of them may use it
- Support synchronous power_off requests in the qcom GDSC driver for
proper GPU power collapse
- Drop test clocks from various Qualcomm clk drivers
- Update parent references to use clk_parent_data/clk_hw in various
Qualcomm clk drivers
- Fixes for the Qualcomm MSM8996 CPU clock controller
- Transition Qualcomm MSM8974 GCC off the externally defined
sleep_clk
- Add GDSCs in the global clock controller for Qualcomm QCS404
- The SDCC core clocks on Qualcomm SM6115 are moved to floor_ops
- Programming of clk_dis_wait for GPU CX GDSC on Qualcomm SC7180 and
SDM845 are moved to use the recently introduced properties in the
GDSC struct
- Qualcomm's RPMh clock driver gains SM8550 and SA8775P clocks, and
the IPA clock is added on a variety of platforms
- De-duplicate identical clks in Qualcomm SMD RPM clk driver
- Add a few missing clocks across msm8998, msm8992, msm8916, qcs404
to Qualcomm SDM RPM clk driver
- Various Qualcomm clk drivers use devm_pm_runtime_enable() to
simplify"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (228 commits)
clk: qcom: apcs-msm8986: Include bitfield.h for FIELD_PREP
clk: qcom: Revert sync_state based clk_disable_unused
clk: imx: pll14xx: fix recalc_rate for negative kdiv
clk: rs9: Drop unused pin_xin field
MAINTAINERS: clk: imx: Add Peng Fan as reviewer
clk: sprd: Add dependency for SPRD_UMS512_CLK
clk: ralink: fix 'mt7621_gate_is_enabled()' function
clk: mediatek: clk-mtk: Remove unneeded semicolon
dt-bindings: clock: remove stih416 bindings
dt-bindings: clock: add loongson-2 clock
dt-bindings: clock: add loongson-2 clock include file
clk: imx: fix compile testing imxrt1050
clk: Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()
clk: imx: set imx_clk_gpr_mux_ops storage-class-specifier to static
clk: renesas: rcar-gen3: Disable R-Car H3 ES1.*
dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml
clk: qcom: gpucc-sdm845: fix clk_dis_wait being programmed for CX GDSC
clk: qcom: gpucc-sc7180: fix clk_dis_wait being programmed for CX GDSC
dt-bindings: clock: qcom,sa8775p-gcc: add the power-domains property
clk: qcom: cpu-8996: add missing cputype include
...
|
||
|
Linus Torvalds
|
17cd4d6f05 |
TTY/Serial driver updates for 6.3-rc1
Here is the big set of serial and tty driver updates for 6.3-rc1. Once again, Jiri and Ilpo have done a number of core vt and tty/serial layer cleanups that were much needed and appreciated. Other than that, it's just a bunch of little tty/serial driver updates: - qcom-geni-serial driver updates - liteuart driver updates - hvcs driver cleanups - n_gsm updates and additions for new features - more 8250 device support added - fpga/dfl update and additions - imx serial driver updates - fsl_lpuart updates - other tiny fixes and updates for serial drivers All of these have been in linux-next for a while with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/itAw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykJbQCfWv/J4ZElO108iHBU5mJCDagUDBgAnAtLLN6A SEAnnokGCDtA/BNIXeES =luRi -----END PGP SIGNATURE----- Merge tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is the big set of serial and tty driver updates for 6.3-rc1. Once again, Jiri and Ilpo have done a number of core vt and tty/serial layer cleanups that were much needed and appreciated. Other than that, it's just a bunch of little tty/serial driver updates: - qcom-geni-serial driver updates - liteuart driver updates - hvcs driver cleanups - n_gsm updates and additions for new features - more 8250 device support added - fpga/dfl update and additions - imx serial driver updates - fsl_lpuart updates - other tiny fixes and updates for serial drivers All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (143 commits) tty: n_gsm: add keep alive support serial: imx: remove a redundant check dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties soc: qcom: geni-se: Move qcom-geni-se.h to linux/soc/qcom/geni-se.h tty: n_gsm: add TIOCMIWAIT support tty: n_gsm: add RING/CD control support tty: n_gsm: mark unusable ioctl structure fields accordingly serial: imx: get rid of registers shadowing serial: imx: refine local variables in rxint() serial: imx: stop using USR2 in FIFO reading loop serial: imx: remove redundant USR2 read from FIFO reading loop serial: imx: do not break from FIFO reading loop prematurely serial: imx: do not sysrq broken chars serial: imx: work-around for hardware RX flood serial: imx: factor-out common code to imx_uart_soft_reset() serial: 8250_pci1xxxx: Add power management functions to quad-uart driver serial: 8250_pci1xxxx: Add RS485 support to quad-uart driver serial: 8250_pci1xxxx: Add driver for quad-uart support serial: 8250_pci: Add serial8250_pci_setup_port definition in 8250_pcilib.c tty: pcn_uart: fix memory leak with using debugfs_lookup() ... |
||
|
Linus Torvalds
|
5b7c4cabbb |
Networking changes for 6.3.
Core
----
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used
to describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols
---------
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP
path manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF
---
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key
to better support decap on GRE tunnel devices not operating
in collect metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk
and bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols
by livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter
---------
- Remove the CLUSTERIP target. It has been marked as obsolete
for years, and we still have WARN splats wrt. races of
the out-of-band /proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to
the existing 'delete' commands, but do not return an error if
the referenced object (set, chain, rule...) did not exist.
Driver API
----------
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into multiple
files, drop some of the unnecessarily granular locks and factor out
common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless Extensions
for Wi-Fi 7 devices at all. Everyone should switch to using nl80211
interface instead.
- Improve the CAN bit timing configuration. Use extack to return error
messages directly to user space, update the SJW handling, including
the definition of a new default value that will benefit CAN-FD
controllers, by increasing their oscillator tolerance.
New hardware / drivers
----------------------
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers
-------
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- enetc: support XDP_REDIRECT for XDP non-linear buffers
- enetc: improve reconfig, avoid link flap and waiting for idle
- enetc: support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xXhC
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
|
||
|
Arnd Bergmann
|
68907175ec |
More Qualcomm driver updates for 6.3
The qcom_scm.h file is moved into firmware/qcom, to avoid having any Qualcomm-specific files directly in include/linux. Support for PMIC GLINK is introduced, which on newer Qualcomm platforms provides an interface to the firmware implementing battery management and USB Type-C handling. Together with the base driver comes the custom altmode support driver. SMD RPM gains support for IPQ9574, and socinfo is extended with support for revision 17 of the information format and soc_id for IPQ5332 and IPQ8064 are added. The qcom_stats is changes not to fail when not all parts are initialized. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmPmiz4VHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FMZ8QANXJEr7U2KX/yd4riBju6Btn0unl I8TR5XlaQAoBUbyp4yTcCUfCe0mEiNcE/YgJwzSKY3mNxc9vLhn1GgqdF+5RFTZw 0H8GBjUpQiRoCC2+pq3YCEisQ49HYXy9W3ys6t1Y3l8xUDLhw5CkeKOGQCqeBDX7 pCflPy7HFUQwPhGt7AOmpNj8+Kh4GnpJHF3D2ShAMFNOn4+l0v8Gh7zDw62FmhBg gjA7eS2aZS7KmqEJMAC4dEFdmhvvN+a80KaWNOOQn2sdLtD64pRW2hknxinPRN+t dGQKeD+VGFHLfxWO40Lv0nP8P/EWjXiZdhO8HXLmVjHC56G/MG8AW0BkvxW9jPAa QGlzY0TbEbi0MbbAnyCJTy6USGtVUZbEmfcZ8r3rUJX5xO8eszSjueD6fH/nKIgo hDIIG8nSLf5TCY+NJzGr8dKENiElsgsfdNAypoX6kpXCRUCXxkiKlWzy/3oywVcO bKm5xs76YNNaANFf46oO6kts7nrOcegyTAdvauFemy1Q3KSWQuFP4jNpcRvWnVMN 8/BlQ+a5uGofN/wwHS2CPmE1r8njEqlPc7wWNc0ugoRO4kAUtB2UldjjS/ZfaFvH BZiDDXhjScPj8lKk4kzGOb34W5AKkwFbTwSR1oN0ckW9UNDx51pNu72YlU8WLydV VHmzD9ndTkWSmp7W =+KgT -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmPqVbkACgkQmmx57+YA GNnlFRAAuaoe9/7kOAliVks4vkJ8284POk50kuS5llzNAP4BPsQIJakE6dOOiTY1 01qbvTlu5pK+f2ls+3WQYr5Rhgck4BUEFD+t9WcPtOpB1uq0puyWj3fwuErjDFJv S6nKp2P0tpru5VzQFPROyrBCw5Zlkc0U9FID4P1Ub5ulxxDWJ4ODb9Q+C9DtDxJo HuUGRnGPLmAJd4ymKzCtnqcg3gocFdrl9K+msFuJwAgdZ0xB893l3wyOFn2k97Uh 8m8WEI/NbCTfDEjag3+yx9Sl3rZhtav0EnlIqowBHQFvxFaBDnvW6H4QmNRugAog +kH1hVzojj35jDllwL07OJzdjqW497Z9i+MEGz45h/8FvvdqJ+71UTkOwr+vnWKu zuEzEfM+bB434UBCQihJ7emx7eCac3TP3Von/NigDDBIXDu8iqNgUNmB8eNyN+gJ Db1mdatG4TuSEqnzetX4XKLP3eydxG8lkEZDOcWlhRz8CSWx9KkBU7W+hVNCBLdV kdhjvZpb5cRcqc/KsS22hmB3HIoISGkLrBOvqs375+Sg9PFxBGst+q24kf9MEDFz ypj/CRiMzkNq8IBwGF003CVhDHmlloq2afQ7YX0w1sEE0XOCIDE0YWNNb9fcoTAC MeDL9R4VgfjR/8Bj7zgnYOMAt6hRoHXsZ1gtS29doIH5iLdTXVI= =8eLr -----END PGP SIGNATURE----- Merge tag 'qcom-drivers-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers More Qualcomm driver updates for 6.3 The qcom_scm.h file is moved into firmware/qcom, to avoid having any Qualcomm-specific files directly in include/linux. Support for PMIC GLINK is introduced, which on newer Qualcomm platforms provides an interface to the firmware implementing battery management and USB Type-C handling. Together with the base driver comes the custom altmode support driver. SMD RPM gains support for IPQ9574, and socinfo is extended with support for revision 17 of the information format and soc_id for IPQ5332 and IPQ8064 are added. The qcom_stats is changes not to fail when not all parts are initialized. * tag 'qcom-drivers-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: soc: qcom: socinfo: Add IDs for IPQ5332 and its variant dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1 firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/ MAINTAINERS: Update qcom CPR maintainer entry dt-bindings: firmware: document Qualcomm SM8550 SCM dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants soc: qcom: socinfo: Add support for new field in revision 17 soc: qcom: smd-rpm: Add IPQ9574 compatible soc: qcom: pmic_glink: remove redundant calculation of svid soc: qcom: stats: Populate all subsystem debugfs files dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies soc: qcom: pmic_glink: Introduce altmode support soc: qcom: pmic_glink: Introduce base PMIC GLINK driver dt-bindings: soc: qcom: Introduce PMIC GLINK binding soc: qcom: dcc: Drop driver for now Link: https://lore.kernel.org/r/20230210182242.2023901-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
01e9d2c6be |
Qualcomm driver updates for v6.3
This introduces a new driver for the Data Capture and Compare block, which provides a mechanism for capturing hardware state (access MMIO registers) either upon request of triggered automatically e.g. upon a watchdog bite, for post mortem analysis. The remote filesystem memory share driver gains support for having its memory bound to more than a single VMID. The SCM driver gains the minimal support needed to support a new mechanism where secure world can put calls on hold and later request them to be retried. Support for the new SA8775P platform is added to rpmhpd, QDU1000 is added to the SCM driver and a long list of platforms are added to the socinfo driver. Support for socinfo data revision 16 is also introduced. Lastly a driver to program the ramp controller in MSM8976 is introduced. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmPSqkcVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FZJoQANgP9rQgJ/JNvKMHA0ZiBK5NmCi+ Km+b2ufICk1au7IhiwRDTlZZBSozShIqSp8ua+WsKQqzKd2Reyj3F33/TZdZrHg+ LW7A3g8e6a6Ook/iJgD0LiTlaGz+/umQ7lnUaaARUPv4JZ/y+pCphTdxTwRXNhvw T6ndjbx7W/qhb9WlZaP3Jnd4z3csr1fpiOfvK1TgJpgZzsKUUq/V9SSRKs3BS5lK gG/F9wxfRVhpjZZCdx9cCO4WtI4xwuocxdGhzljH0AHvAAgab/c7w9YKrkFpGib6 lj3sJ+TLC/nZc93Swzk4Sv57F//f1EhBvWZImBiZioR7IPPrcotdVa0wKOuiEmPn TWPnEDk+5KiTG4iXOfQ6z0NbAM9S057El0nb8jYw6rx04xOHZYpb5w6172ftYNFk 0DSfNuEImh8YZwhwRKbP1LHemwliUptaFonYc9SrFW+Y9MLh69TTTggv/N6YzLK5 /e+RQ7tjE/idg//iZAK649mqzZCnHc+di3S055otcqm3Uhr5/xYfIwFce6ssTNjK SNaK9LjwE+g7Rqy0jQV7uFyQ+HXy443TX8fRnnwZHMv+M+U+9VpuNYaNL3cJ9j7S qsCUWcjN36pFCPMrDPSSmW5VEQD+WJOwGA4ZqQrUVXvLgtEfHZPd0PID8kxul6PE KRl0gMt770iAnUtK =EWZ7 -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmPqVYUACgkQmmx57+YA GNnD1xAApXNA9N+BLLjfOXErNlKWTQXHThSQIvHxx7xubIy3Nm/soGCJFcp45hYJ IW74MuOy5N3ngFe4HzGyUiHW/9E9BLZGh0ZzHUO/dIhG7io3zAC7tDw6bbwu67Wz NhWBurgsy5BL7jjX/bBDKZuthyEI6IlD2TYLeFqrD63ZoryviyvD3IKS4JAo8zg3 Fz7z8Cr9v02cur6QJum95iNxogncX8L1/WQwRfHXsMV4MgteArTuNTh8zAXBPAlV T7ENWe/2U6GCvoU295hl5NLHwARSm1bsSNYVCJR5cvSBXqd8U06WDFLBttUdRg8J 32KCWDLZ/J8IF69DvOWRfh+cmJmlM14o2uNLSnFbV2PyNh4LORsWCbx2J4zX147T nocFySuOxP9g4+7h0zv5FFm+uAS7RPIPLKCdCsYR3RbZl5cbZmnvJzQIgLKaVa+e fprcDT6X8HhODDtj49kEtK7kRe3dFz0MwiHf9wxyx7rm1eIlqGI3reHaU4fcaml2 PqgtuShMGx3uSnpHsi2j/sXuCEmKpNSwOBPU1INNgKm2FmMFy4OYsPbe7s1vdTpi irJ3CC/3Uk9r4CEoJe3G9TURFQyEpNISjdCEa21tGD0miMrdsB79JMU/nJkiLpg9 7l8EDMU33HYKsAqqezocNqzreV2s0YjFPs7Vts5aIh+aecS/Kzk= =B0bJ -----END PGP SIGNATURE----- Merge tag 'qcom-drivers-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers Qualcomm driver updates for v6.3 This introduces a new driver for the Data Capture and Compare block, which provides a mechanism for capturing hardware state (access MMIO registers) either upon request of triggered automatically e.g. upon a watchdog bite, for post mortem analysis. The remote filesystem memory share driver gains support for having its memory bound to more than a single VMID. The SCM driver gains the minimal support needed to support a new mechanism where secure world can put calls on hold and later request them to be retried. Support for the new SA8775P platform is added to rpmhpd, QDU1000 is added to the SCM driver and a long list of platforms are added to the socinfo driver. Support for socinfo data revision 16 is also introduced. Lastly a driver to program the ramp controller in MSM8976 is introduced. * tag 'qcom-drivers-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits) firmware: qcom: scm: Add wait-queue handling logic dt-bindings: firmware: qcom,scm: Add optional interrupt Revert "dt-bindings: power: rpmpd: Add SM4250 support" Revert "soc: qcom: rpmpd: Add SM4250 support" soc: qcom: socinfo: Add a bunch of older SoCs dt-bindings: arm: qcom,ids: Add a bunch of older SoCs dt-bindings: arm: qcom,ids: Add QRD board ID soc: qcom: socinfo: Fix soc_id order dt-bindings: soc: qcom: smd-rpm: Exclude MSM8936 from glink-channels dt-bindings: firmware: qcom: scm: Separate VMIDs from header to bindings soc: qcom: rmtfs: Optionally map RMTFS to more VMs dt-bindings: reserved-memory: rmtfs: Make qcom,vmid an array dt-bindings: firmware: scm: Add QDU1000/QRU1000 compatible dt-bindings: firmware: qcom,scm: narrow clocks and interconnects dt-bindings: firmware: qcom,scm: document MSM8226 clocks soc: qcom: ramp_controller: Make things static soc: qcom: rmphpd: add power domains for sa8775p dt-bindings: power: qcom,rpmpd: document sa8775p PM: AVS: qcom-cpr: Fix an error handling path in cpr_probe() soc: qcom: dcc: rewrite description of dcc sysfs files ... Link: https://lore.kernel.org/r/20230126163008.3676950-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Elliot Berman
|
491581f40e |
soc: qcom: geni-se: Move qcom-geni-se.h to linux/soc/qcom/geni-se.h
Move include/linux/qcom-geni-se.h to include/linux/soc/qcom/geni-se.h. This removes 1 of a few remaining Qualcomm-specific headers into a more approciate subdirectory under include/. Signed-off-by: Elliot Berman <quic_eberman@quicinc.com> Acked-by: Bjorn Andersson <andersson@kernel.org> Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Reviewed-by: Guru Das Srinagesh <quic_gurus@quicinc.com> Link: https://lore.kernel.org/r/20230203210133.3552796-1-quic_eberman@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Arnd Bergmann
|
7d47f6ffa5 |
Apple SoC RTKit/PMGR updates for 6.3.
This time around we have a PMGR change to allow IRQ-safe usage, RTKit crash register dump decoding, and a bunch of RTKit API changes used by upcoming drivers. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQSByI3Ki0mXziclZJcd+FPLCI8zYgUCY9kAQwAKCRAd+FPLCI8z YhQYAP4km7JfYWsQYKjGSqHounJqgzFnaGFyN3xBmUH3cpyEaQD+IP3vl9PBBWqw /rrpVlSwfZ6E1VclFTpaE6/KJPDZwwA= =tXq9 -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmPg3mQACgkQmmx57+YA GNkhQg/+INoPNTCkN3iAOVbcYG9AfluK7tHsYXsr/yBxuSJgehGKWWLBDlloANSJ ry7tOxlThT+SIuLTTyVTCw18A38eZmbHmBexSxJQek1BDC6BXsVsnWIV8DCSB461 9kaVxrFgIjSe1vh+SDgRmQeEvf8qXJRBe8TLm8G2F4Wnf2hxiD5j7Kq0lIj2QC/L /ITzB0LE3DbEMvvTdXW2drDzwz1zne0SNolFmPtVo8fDyQbStSURpcR41kzcXodk j4PXy0PxGe31eOxkEVyVIo9+bJMGSzLOjgraFBosbfi0n8NfgnPy+NjD5lm2aqz1 h5zYrFYPqvkwsQMBPsqO3zMk0Q4x/uU0QmSUZfYte3uYMHstEdtG/y+8x6ELUWXr /LFtAwYfntj54GbiU1YAP6xXaJpYluCF1ICW10GZTOlprNgSB3rrb3G8HLJChOxb /KDtG+O0mVtyS45FZjvBJJ8GAU0FCs17YInUCDQV64XCSa7SV4X7Rw4D/dHrhDL5 u6yrKlYqLKh/6Nom27a5C7F8L7XIreMu7PK6Hc9lrdQoMBOKd9CQT54G8nEEQHNx Hrzk/aXJ5USwREawlDltHnZz2mcXzXCFBhXTJNL/3Tj0qV3QXtP4tHxaW/NFcNaZ WX8YpCP0MErPrkvy5VX5H9S3qJKXP6b66pM+rF6c7LoxP9JgURk= =HucU -----END PGP SIGNATURE----- Merge tag 'asahi-soc-rtkit-pmgr-6.3' of https://github.com/AsahiLinux/linux into soc/drivers Apple SoC RTKit/PMGR updates for 6.3. This time around we have a PMGR change to allow IRQ-safe usage, RTKit crash register dump decoding, and a bunch of RTKit API changes used by upcoming drivers. * tag 'asahi-soc-rtkit-pmgr-6.3' of https://github.com/AsahiLinux/linux: soc: apple: rtkit: Add register dump decoding to crashlog soc: apple: rtkit: Export non-devm init/free functions soc: apple: rtkit: Add a private pointer to apple_rtkit_shmem soc: apple: apple-pmgr-pwrstate: Switch to IRQ-safe mode soc: apple: rtkit: Add apple_rtkit_idle() function Link: https://lore.kernel.org/r/4790bdc4-b6e2-228b-771f-023363f65fb3@marcan.st Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Bjorn Andersson
|
9b4a19153a | Merge branch '20230201041853.1934355-1-quic_bjorande@quicinc.com' into drivers-for-6.3 | ||
|
Bjorn Andersson
|
58ef4ece1e |
soc: qcom: pmic_glink: Introduce base PMIC GLINK driver
The PMIC GLINK service runs on one of the co-processors of some modern Qualcomm platforms and implements USB-C and battery managements. It uses a message based protocol over GLINK for communication with the OS, hence the name. The driver implemented provides the rpmsg device for communication and uses auxiliary bus to spawn off individual devices in respective subsystem. The auxiliary devices are spawned off from a platform_device, so that the drm_bridge is available early, to allow the DisplayPort driver to probe even before the remoteproc has spun up. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # SM8350 PDX215 Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-MTP & SM8450-HDK Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230201041853.1934355-3-quic_bjorande@quicinc.com |
||
|
Lukas Bulwahn
|
b5018dd5aa |
ARM: s3c: remove obsolete s3c-cpu-freq header
The s3c-cpu-freq header was previously included by:
./arch/arm/mach-s3c/mach-bast.c
./arch/arm/mach-s3c/mach-osiris-dvs.c
./arch/arm/mach-s3c/mach-osiris.c
./include/linux/soc/samsung/s3c-cpufreq-core.h
Commit a4946a153cb9 ("ARM: s3c: remove all s3c24xx support") removes the
files in ./arch/arm/mach-s3c/; commit daf0ee583fc7 ("cpufreq: remove
s3c24xx drivers") removes the file s3c-cpufreq-core.h.
Remove this obsolete header file.
This issue was identified, as s3c-cpu-freq.h referred to the removed config
ARM_S3C_CPUFREQ.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Asahi Lina
|
b3892860f5 |
soc: apple: rtkit: Export non-devm init/free functions
While we normally encourage devm usage by drivers, some consumers (and in particular the upcoming Rust abstractions) might want to manually manage memory. Export the raw functions to make this possible. Signed-off-by: Asahi Lina <lina@asahilina.net> Reviewed-by: Sven Peter <sven@svenpeter.dev> Reviewed-by: Eric Curtin <ecurtin@redhat.com> Signed-off-by: Hector Martin <marcan@marcan.st> |
||
|
Asahi Lina
|
4435d63f17 |
soc: apple: rtkit: Add a private pointer to apple_rtkit_shmem
This allows downstream consumers to keep track of private data for shmem mappings. In particular, the Rust abstraction will use this to safely drop data associated with a mapping when it is unmapped. Signed-off-by: Asahi Lina <lina@asahilina.net> Reviewed-by: Sven Peter <sven@svenpeter.dev> Reviewed-by: Eric Curtin <ecurtin@redhat.com> Signed-off-by: Hector Martin <marcan@marcan.st> |
||
|
Hector Martin
|
40eaa8c0cb |
soc: apple: rtkit: Add apple_rtkit_idle() function
This is yet another low power mode, used by DCP. Reviewed-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Sven Peter <sven@svenpeter.dev> Signed-off-by: Hector Martin <marcan@marcan.st> |
||
|
Jakub Kicinski
|
b568d3072a |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Conflicts:
drivers/net/ethernet/intel/ice/ice_main.c
418e53401e47 ("ice: move devlink port creation/deletion")
643ef23bd9dd ("ice: Introduce local var for readability")
https://lore.kernel.org/all/20230127124025.0dacef40@canb.auug.org.au/
https://lore.kernel.org/all/20230124005714.3996270-1-anthony.l.nguyen@intel.com/
drivers/net/ethernet/engleder/tsnep_main.c
3d53aaef4332 ("tsnep: Fix TX queue stop/wake for multiple queues")
25faa6a4c5ca ("tsnep: Replace TX spin_lock with __netif_tx_lock")
https://lore.kernel.org/all/20230127123604.36bb3e99@canb.auug.org.au/
net/netfilter/nf_conntrack_proto_sctp.c
13bd9b31a969 ("Revert "netfilter: conntrack: add sctp DATA_SENT state"")
a44b7651489f ("netfilter: conntrack: unify established states for SCTP paths")
f71cb8f45d09 ("netfilter: conntrack: sctp: use nf log infrastructure for invalid packets")
https://lore.kernel.org/all/20230127125052.674281f9@canb.auug.org.au/
https://lore.kernel.org/all/d36076f3-6add-a442-6d4b-ead9f7ffff86@tessares.net/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Nancy.Lin
|
8af1f6b5bc |
soc: mediatek: add cmdq support of mtk-mmsys config API for mt8195 vdosys1
Add cmdq support for mtk-mmsys config API. The mmsys config register settings need to take effect with the other HW settings(like OVL_ADAPTOR...) at the same vblanking time. If we use CPU to write the mmsys reg, we can't guarantee all the settings can be written in the same vblanking time. Cmdq is used for this purpose. We prepare all the related HW settings in one cmdq packet. The first command in the packet is "wait stream done", and then following with all the HW settings. After the cmdq packet is flush to GCE HW. The GCE waits for the "stream done event" to coming and then starts flushing all the HW settings. This can guarantee all the settings flush in the same vblanking. Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Link: https://lore.kernel.org/r/20230113104434.28023-8-nancy.lin@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> |
||
|
Nancy.Lin
|
3dd20b715c |
soc: mediatek: add mtk-mmsys config API for mt8195 vdosys1
Add four mmsys config APIs. The config APIs are used for config mmsys reg. Some mmsys regs need to be set according to the HW engine binding to the mmsys simultaneously. 1. mtk_mmsys_merge_async_config: config merge async width/height. async is used for cross-clock domain synchronization. 2. mtk_mmsys_hdr_confing: config hdr backend async width/height. 3. mtk_mmsys_mixer_in_config and mtk_mmsys_mixer_in_config: config mixer related settings. Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Link: https://lore.kernel.org/r/20230113104434.28023-7-nancy.lin@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> |
||
|
Nancy.Lin
|
be234d0024 |
soc: mediatek: add mtk-mmsys ethdr and mdp_rdma components
Add new mmsys component: ethdr_mixer and mdp_rdma. These components will use in mt8195 vdosys1. Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Link: https://lore.kernel.org/r/20230113104434.28023-4-nancy.lin@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> |
||
|
Jakub Kicinski
|
62be69397e |
wireless-next patches for v6.3
First set of patches for v6.3. The most important change here is that the old Wireless Extension user space interface is not supported on Wi-Fi 7 devices at all. We also added a warning if anyone with modern drivers (ie. cfg80211 and mac80211 drivers) tries to use Wireless Extensions, everyone should switch to using nl80211 interface instead. Static WEP support is removed, there wasn't any driver using that anyway so there's no user impact. Otherwise it's smaller features and fixes as usual. Note: As mt76 had tricky conflicts due to the fixes in wireless tree, we decided to merge wireless into wireless-next to solve them easily. There should not be any merge problems anymore. Major changes: cfg80211 * remove never used static WEP support * warn if Wireless Extention interface is used with cfg80211/mac80211 drivers * stop supporting Wireless Extensions with Wi-Fi 7 devices * support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting rfkill * add GPIO DT support bitfield * add FIELD_PREP_CONST() mt76 * per-PHY LED support rtw89 * support new Bluetooth co-existance version rtl8xxxu * support RTL8188EU -----BEGIN PGP SIGNATURE----- iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmPOYeQRHGt2YWxvQGtl cm5lbC5vcmcACgkQbhckVSbrbZvSlAf/Y5ZY5xLEytUma7fBkBObXEfP/7tlBBsu RoRKVx77D1LGfGu0WXG9PCdvyY70e2QtrkdeLHF3gfzLYpNZIyB/eOFhwzCtbJrD ls2yXhdTm9OwDOHAdvXLXx3fmF4bXni7dYdi78VrGCFOnU6XE6X5JpnZYU1SmQ1U 8Ro7H6D9yp8MKfh5Ct19PYSTS5hmHB09vfJ4rbkjHp7kEGvJjYNbvAqGsxatPnh9 Zw35TEIwmhZO4GsXxsG12g6LZa8W8RO8uCwepHxtFM8oGsF68Yb/lkLcdtMiuN6V WdB6qn24faEWjdmt5BzJGueA3Td8KI6t5cHhGbQVKjyFD8lAC+IJQA== =Nq9U -----END PGP SIGNATURE----- Merge tag 'wireless-next-2023-01-23' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.3 First set of patches for v6.3. The most important change here is that the old Wireless Extension user space interface is not supported on Wi-Fi 7 devices at all. We also added a warning if anyone with modern drivers (ie. cfg80211 and mac80211 drivers) tries to use Wireless Extensions, everyone should switch to using nl80211 interface instead. Static WEP support is removed, there wasn't any driver using that anyway so there's no user impact. Otherwise it's smaller features and fixes as usual. Note: As mt76 had tricky conflicts due to the fixes in wireless tree, we decided to merge wireless into wireless-next to solve them easily. There should not be any merge problems anymore. Major changes: cfg80211 - remove never used static WEP support - warn if Wireless Extention interface is used with cfg80211/mac80211 drivers - stop supporting Wireless Extensions with Wi-Fi 7 devices - support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting rfkill - add GPIO DT support bitfield - add FIELD_PREP_CONST() mt76 - per-PHY LED support rtw89 - support new Bluetooth co-existance version rtl8xxxu - support RTL8188EU * tag 'wireless-next-2023-01-23' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (123 commits) wifi: wireless: deny wireless extensions on MLO-capable devices wifi: wireless: warn on most wireless extension usage wifi: mac80211: drop extra 'e' from ieeee80211... name wifi: cfg80211: Deduplicate certificate loading bitfield: add FIELD_PREP_CONST() wifi: mac80211: add kernel-doc for EHT structure mac80211: support minimal EHT rate reporting on RX wifi: mac80211: Add HE MU-MIMO related flags in ieee80211_bss_conf wifi: mac80211: Add VHT MU-MIMO related flags in ieee80211_bss_conf wifi: cfg80211: Use MLD address to indicate MLD STA disconnection wifi: cfg80211: Support 32 bytes KCK key in GTK rekey offload wifi: cfg80211: Fix extended KCK key length check in nl80211_set_rekey_data() wifi: cfg80211: remove support for static WEP wifi: rtl8xxxu: Dump the efuse only for untested devices wifi: rtl8xxxu: Print the ROM version too wifi: rtw88: Use non-atomic sta iterator in rtw_ra_mask_info_update() wifi: rtw88: Use rtw_iterate_vifs() for rtw_vif_watch_dog_iter() wifi: rtw88: Move register access from rtw_bf_assoc() outside the RCU wifi: rtl8xxxu: Use a longer retry limit of 48 wifi: rtl8xxxu: Report the RSSI to the firmware ... ==================== Link: https://lore.kernel.org/r/20230123103338.330CBC433EF@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Garmin.Chang
|
e610e81464 |
soc: mediatek: pm-domains: Add support for mt8188
Add domain control data including bus protection data size change due to more protection steps in mt8188. Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20221223080553.9397-3-Garmin.Chang@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> |
||
|
Kalle Valo
|
d0e9951183 |
Merge wireless into wireless-next
Due to the two cherry picked commits from wireless to wireless-next we have several conflicts in mt76. To avoid any bugs with conflicts merge wireless into wireless-next. 96f134dc1964 wifi: mt76: handle possible mt76_rx_token_consume failures fe13dad8992b wifi: mt76: dma: do not increment queue head if mt76_dma_add_buf fails |
||
|
Lorenzo Bianconi
|
08a764a7c5 |
net: ethernet: mtk_wed: add reset/reset_complete callbacks
Introduce reset and reset_complete wlan callback to schedule WLAN driver reset when ethernet/wed driver is resetting. Tested-by: Daniel Golle <daniel@makrotopia.org> Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Arnd Bergmann
|
014e79d7ec |
cpufreq: remove s3c24xx drivers
All s3c24xx platforms were removed, so these five drivers are all obsolete now. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
cc146410f9 |
ARM: s3c: remove adc.c
This driver could not be enabled on s3c64xx for a long time because of the ARCH_MULTIPLATFORM dependency, so remove it. Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
1ea35b3557 |
ARM: s3c: remove s3c24xx specific hacks
A number of device drivers reference CONFIG_ARM_S3C24XX_CPUFREQ or similar symbols that are no longer available with the platform gone, though the drivers themselves are still used on newer platforms, so remove these hacks. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
1027b4df83 |
ARM: mmp: remove old PM support
Assuming that we don't actually want the old-style pm-mmp2.c and pm-pxa910.c implementation, all these files can go away as well. Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
8825acd7cc |
ARM: omap1: remove dead code
After the removal of the unused board files, I went through the omap1 code to look for code that no longer has any callers and remove that. In particular, support for the omap7xx/omap8xx family is now completely unused, so I'm only leaving omap15xx/omap16xx/omap59xx. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com> Cc: linux-omap@vger.kernel.org Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
980a637d11 |
ARM: omap1: fix !ARCH_OMAP1_ANY link failures
While compile-testing randconfig builds for the upcoming boardfile
removal, I noticed that an earlier patch of mine was completely
broken, and the introduction of CONFIG_ARCH_OMAP1_ANY only replaced
one set of build failures with another one, now resulting in
link failures like
ld: drivers/video/fbdev/omap/omapfb_main.o: in function `omapfb_do_probe':
drivers/video/fbdev/omap/omapfb_main.c:1703: undefined reference to `omap_set_dma_priority'
ld: drivers/dma/ti/omap-dma.o: in function `omap_dma_free_chan_resources':
drivers/dma/ti/omap-dma.c:777: undefined reference to `omap_free_dma'
drivers/dma/ti/omap-dma.c:1685: undefined reference to `omap_get_plat_info'
ld: drivers/usb/gadget/udc/omap_udc.o: in function `next_in_dma':
drivers/usb/gadget/udc/omap_udc.c:820: undefined reference to `omap_get_dma_active_status'
I tried reworking it, but the resulting patch ended up much bigger than
simply avoiding the original problem of unused-function warnings like
arch/arm/mach-omap1/mcbsp.c:76:30: error: unused variable 'omap1_mcbsp_ops' [-Werror,-Wunused-variable]
As a result, revert the previous fix, and rearrange the code that
produces warnings to hide them. For mcbsp, the #ifdef check can
simply be removed as the cpu_is_omapxxx() checks already achieve
the same result, while in the io.c the easiest solution appears to
be to merge the common map bits into each soc specific portion.
This gets cleaned in a nicer way after omap7xx support gets dropped,
as the remaining SoCs all have the exact same I/O map.
Fixes: 615dce5bf736 ("ARM: omap1: fix build with no SoC selected")
Cc: stable@vger.kernel.org
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Dawei Li
|
33ae3d0955 |
soc: qcom: apr: make remove callback of apr driver void returned
Since commit fc7a6209d571 ("bus: Make remove callback return void")
forces bus_type::remove be void-returned, it doesn't make much sense
for any bus based driver implementing remove callbalk to return
non-void to its caller.
As such, change the remove function for apr bus based drivers to
return void.
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/TYCP286MB23232B7968D34DB8323B0F16CAFB9@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM
|
||
|
Dmitry Baryshkov
|
c941b98781 |
clk: qcom: smd-rpm: remove duplication between MMXI and MMAXI defines
The commit 644c42295592 ("clk: qcom: smd: Add SM6375 clocks") added a
duplicate of the existing define QCOM_SMD_RPM_MMAXI_CLK, drop it now.
Fixes: 644c42295592 ("clk: qcom: smd: Add SM6375 clocks")
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221209164855.128798-4-dmitry.baryshkov@linaro.org
|
||
|
Kalle Valo
|
33381618d7 |
mt76 patches for 6.2
- fixes - per-PHY LED support -----BEGIN PGP SIGNATURE----- Comment: GPGTools - http://gpgtools.org iF0EABECAB0WIQR10Rp9kadxD0kAQu/XfRQdAqdu9QUCY5NYWQAKCRDXfRQdAqdu 9bUrAJ46VwPmamfkZXKDj41IoNdcmvW/iwCfQD1F1KnrWxsqcglcKTX0GvEdm4s= =Gy5L -----END PGP SIGNATURE----- Merge tag 'mt76-for-kvalo-2022-12-09' of https://github.com/nbd168/wireless mt76 patches for 6.2 - fixes - per-PHY LED support |
||
|
Linus Torvalds
|
7e68dd7d07 |
Networking changes for 6.2.
Core
----
- Allow live renaming when an interface is up
- Add retpoline wrappers for tc, improving considerably the
performances of complex queue discipline configurations.
- Add inet drop monitor support.
- A few GRO performance improvements.
- Add infrastructure for atomic dev stats, addressing long standing
data races.
- De-duplicate common code between OVS and conntrack offloading
infrastructure.
- A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements.
- Netfilter: introduce packet parser for tunneled packets
- Replace IPVS timer-based estimators with kthreads to scale up
the workload with the number of available CPUs.
- Add the helper support for connection-tracking OVS offload.
BPF
---
- Support for user defined BPF objects: the use case is to allocate
own objects, build own object hierarchies and use the building
blocks to build own data structures flexibly, for example, linked
lists in BPF.
- Make cgroup local storage available to non-cgroup attached BPF
programs.
- Avoid unnecessary deadlock detection and failures wrt BPF task
storage helpers.
- A relevant bunch of BPF verifier fixes and improvements.
- Veristat tool improvements to support custom filtering, sorting,
and replay of results.
- Add LLVM disassembler as default library for dumping JITed code.
- Lots of new BPF documentation for various BPF maps.
- Add bpf_rcu_read_{,un}lock() support for sleepable programs.
- Add RCU grace period chaining to BPF to wait for the completion
of access from both sleepable and non-sleepable BPF programs.
- Add support storing struct task_struct objects as kptrs in maps.
- Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
values.
- Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions.
Protocols
---------
- TCP: implement Protective Load Balancing across switch links.
- TCP: allow dynamically disabling TCP-MD5 static key, reverting
back to fast[er]-path.
- UDP: Introduce optional per-netns hash lookup table.
- IPv6: simplify and cleanup sockets disposal.
- Netlink: support different type policies for each generic
netlink operation.
- MPTCP: add MSG_FASTOPEN and FastOpen listener side support.
- MPTCP: add netlink notification support for listener sockets
events.
- SCTP: add VRF support, allowing sctp sockets binding to VRF
devices.
- Add bridging MAC Authentication Bypass (MAB) support.
- Extensions for Ethernet VPN bridging implementation to better
support multicast scenarios.
- More work for Wi-Fi 7 support, comprising conversion of all
the existing drivers to internal TX queue usage.
- IPSec: introduce a new offload type (packet offload) allowing
complete header processing and crypto offloading.
- IPSec: extended ack support for more descriptive XFRM error
reporting.
- RXRPC: increase SACK table size and move processing into a
per-local endpoint kernel thread, reducing considerably the
required locking.
- IEEE 802154: synchronous send frame and extended filtering
support, initial support for scanning available 15.4 networks.
- Tun: bump the link speed from 10Mbps to 10Gbps.
- Tun/VirtioNet: implement UDP segmentation offload support.
Driver API
----------
- PHY/SFP: improve power level switching between standard
level 1 and the higher power levels.
- New API for netdev <-> devlink_port linkage.
- PTP: convert existing drivers to new frequency adjustment
implementation.
- DSA: add support for rx offloading.
- Autoload DSA tagging driver when dynamically changing protocol.
- Add new PCP and APPTRUST attributes to Data Center Bridging.
- Add configuration support for 800Gbps link speed.
- Add devlink port function attribute to enable/disable RoCE and
migratable.
- Extend devlink-rate to support strict prioriry and weighted fair
queuing.
- Add devlink support to directly reading from region memory.
- New device tree helper to fetch MAC address from nvmem.
- New big TCP helper to simplify temporary header stripping.
New hardware / drivers
----------------------
- Ethernet:
- Marvel Octeon CNF95N and CN10KB Ethernet Switches.
- Marvel Prestera AC5X Ethernet Switch.
- WangXun 10 Gigabit NIC.
- Motorcomm yt8521 Gigabit Ethernet.
- Microchip ksz9563 Gigabit Ethernet Switch.
- Microsoft Azure Network Adapter.
- Linux Automation 10Base-T1L adapter.
- PHY:
- Aquantia AQR112 and AQR412.
- Motorcomm YT8531S.
- PTP:
- Orolia ART-CARD.
- WiFi:
- MediaTek Wi-Fi 7 (802.11be) devices.
- RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB
devices.
- Bluetooth:
- Broadcom BCM4377/4378/4387 Bluetooth chipsets.
- Realtek RTL8852BE and RTL8723DS.
- Cypress.CYW4373A0 WiFi + Bluetooth combo device.
Drivers
-------
- CAN:
- gs_usb: bus error reporting support.
- kvaser_usb: listen only and bus error reporting support.
- Ethernet NICs:
- Intel (100G):
- extend action skbedit to RX queue mapping.
- implement devlink-rate support.
- support direct read from memory.
- nVidia/Mellanox (mlx5):
- SW steering improvements, increasing rules update rate.
- Support for enhanced events compression.
- extend H/W offload packet manipulation capabilities.
- implement IPSec packet offload mode.
- nVidia/Mellanox (mlx4):
- better big TCP support.
- Netronome Ethernet NICs (nfp):
- IPsec offload support.
- add support for multicast filter.
- Broadcom:
- RSS and PTP support improvements.
- AMD/SolarFlare:
- netlink extened ack improvements.
- add basic flower matches to offload, and related stats.
- Virtual NICs:
- ibmvnic: introduce affinity hint support.
- small / embedded:
- FreeScale fec: add initial XDP support.
- Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood.
- TI am65-cpsw: add suspend/resume support.
- Mediatek MT7986: add RX wireless wthernet dispatch support.
- Realtek 8169: enable GRO software interrupt coalescing per
default.
- Ethernet high-speed switches:
- Microchip (sparx5):
- add support for Sparx5 TC/flower H/W offload via VCAP.
- Mellanox mlxsw:
- add 802.1X and MAC Authentication Bypass offload support.
- add ip6gre support.
- Embedded Ethernet switches:
- Mediatek (mtk_eth_soc):
- improve PCS implementation, add DSA untag support.
- enable flow offload support.
- Renesas:
- add rswitch R-Car Gen4 gPTP support.
- Microchip (lan966x):
- add full XDP support.
- add TC H/W offload via VCAP.
- enable PTP on bridge interfaces.
- Microchip (ksz8):
- add MTU support for KSZ8 series.
- Qualcomm 802.11ax WiFi (ath11k):
- support configuring channel dwell time during scan.
- MediaTek WiFi (mt76):
- enable Wireless Ethernet Dispatch (WED) offload support.
- add ack signal support.
- enable coredump support.
- remain_on_channel support.
- Intel WiFi (iwlwifi):
- enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities.
- 320 MHz channels support.
- RealTek WiFi (rtw89):
- new dynamic header firmware format support.
- wake-over-WLAN support.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=CbJC
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Allow live renaming when an interface is up
- Add retpoline wrappers for tc, improving considerably the
performances of complex queue discipline configurations
- Add inet drop monitor support
- A few GRO performance improvements
- Add infrastructure for atomic dev stats, addressing long standing
data races
- De-duplicate common code between OVS and conntrack offloading
infrastructure
- A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements
- Netfilter: introduce packet parser for tunneled packets
- Replace IPVS timer-based estimators with kthreads to scale up the
workload with the number of available CPUs
- Add the helper support for connection-tracking OVS offload
BPF:
- Support for user defined BPF objects: the use case is to allocate
own objects, build own object hierarchies and use the building
blocks to build own data structures flexibly, for example, linked
lists in BPF
- Make cgroup local storage available to non-cgroup attached BPF
programs
- Avoid unnecessary deadlock detection and failures wrt BPF task
storage helpers
- A relevant bunch of BPF verifier fixes and improvements
- Veristat tool improvements to support custom filtering, sorting,
and replay of results
- Add LLVM disassembler as default library for dumping JITed code
- Lots of new BPF documentation for various BPF maps
- Add bpf_rcu_read_{,un}lock() support for sleepable programs
- Add RCU grace period chaining to BPF to wait for the completion of
access from both sleepable and non-sleepable BPF programs
- Add support storing struct task_struct objects as kptrs in maps
- Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
values
- Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions
Protocols:
- TCP: implement Protective Load Balancing across switch links
- TCP: allow dynamically disabling TCP-MD5 static key, reverting back
to fast[er]-path
- UDP: Introduce optional per-netns hash lookup table
- IPv6: simplify and cleanup sockets disposal
- Netlink: support different type policies for each generic netlink
operation
- MPTCP: add MSG_FASTOPEN and FastOpen listener side support
- MPTCP: add netlink notification support for listener sockets events
- SCTP: add VRF support, allowing sctp sockets binding to VRF devices
- Add bridging MAC Authentication Bypass (MAB) support
- Extensions for Ethernet VPN bridging implementation to better
support multicast scenarios
- More work for Wi-Fi 7 support, comprising conversion of all the
existing drivers to internal TX queue usage
- IPSec: introduce a new offload type (packet offload) allowing
complete header processing and crypto offloading
- IPSec: extended ack support for more descriptive XFRM error
reporting
- RXRPC: increase SACK table size and move processing into a
per-local endpoint kernel thread, reducing considerably the
required locking
- IEEE 802154: synchronous send frame and extended filtering support,
initial support for scanning available 15.4 networks
- Tun: bump the link speed from 10Mbps to 10Gbps
- Tun/VirtioNet: implement UDP segmentation offload support
Driver API:
- PHY/SFP: improve power level switching between standard level 1 and
the higher power levels
- New API for netdev <-> devlink_port linkage
- PTP: convert existing drivers to new frequency adjustment
implementation
- DSA: add support for rx offloading
- Autoload DSA tagging driver when dynamically changing protocol
- Add new PCP and APPTRUST attributes to Data Center Bridging
- Add configuration support for 800Gbps link speed
- Add devlink port function attribute to enable/disable RoCE and
migratable
- Extend devlink-rate to support strict prioriry and weighted fair
queuing
- Add devlink support to directly reading from region memory
- New device tree helper to fetch MAC address from nvmem
- New big TCP helper to simplify temporary header stripping
New hardware / drivers:
- Ethernet:
- Marvel Octeon CNF95N and CN10KB Ethernet Switches
- Marvel Prestera AC5X Ethernet Switch
- WangXun 10 Gigabit NIC
- Motorcomm yt8521 Gigabit Ethernet
- Microchip ksz9563 Gigabit Ethernet Switch
- Microsoft Azure Network Adapter
- Linux Automation 10Base-T1L adapter
- PHY:
- Aquantia AQR112 and AQR412
- Motorcomm YT8531S
- PTP:
- Orolia ART-CARD
- WiFi:
- MediaTek Wi-Fi 7 (802.11be) devices
- RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB
devices
- Bluetooth:
- Broadcom BCM4377/4378/4387 Bluetooth chipsets
- Realtek RTL8852BE and RTL8723DS
- Cypress.CYW4373A0 WiFi + Bluetooth combo device
Drivers:
- CAN:
- gs_usb: bus error reporting support
- kvaser_usb: listen only and bus error reporting support
- Ethernet NICs:
- Intel (100G):
- extend action skbedit to RX queue mapping
- implement devlink-rate support
- support direct read from memory
- nVidia/Mellanox (mlx5):
- SW steering improvements, increasing rules update rate
- Support for enhanced events compression
- extend H/W offload packet manipulation capabilities
- implement IPSec packet offload mode
- nVidia/Mellanox (mlx4):
- better big TCP support
- Netronome Ethernet NICs (nfp):
- IPsec offload support
- add support for multicast filter
- Broadcom:
- RSS and PTP support improvements
- AMD/SolarFlare:
- netlink extened ack improvements
- add basic flower matches to offload, and related stats
- Virtual NICs:
- ibmvnic: introduce affinity hint support
- small / embedded:
- FreeScale fec: add initial XDP support
- Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood
- TI am65-cpsw: add suspend/resume support
- Mediatek MT7986: add RX wireless wthernet dispatch support
- Realtek 8169: enable GRO software interrupt coalescing per
default
- Ethernet high-speed switches:
- Microchip (sparx5):
- add support for Sparx5 TC/flower H/W offload via VCAP
- Mellanox mlxsw:
- add 802.1X and MAC Authentication Bypass offload support
- add ip6gre support
- Embedded Ethernet switches:
- Mediatek (mtk_eth_soc):
- improve PCS implementation, add DSA untag support
- enable flow offload support
- Renesas:
- add rswitch R-Car Gen4 gPTP support
- Microchip (lan966x):
- add full XDP support
- add TC H/W offload via VCAP
- enable PTP on bridge interfaces
- Microchip (ksz8):
- add MTU support for KSZ8 series
- Qualcomm 802.11ax WiFi (ath11k):
- support configuring channel dwell time during scan
- MediaTek WiFi (mt76):
- enable Wireless Ethernet Dispatch (WED) offload support
- add ack signal support
- enable coredump support
- remain_on_channel support
- Intel WiFi (iwlwifi):
- enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities
- 320 MHz channels support
- RealTek WiFi (rtw89):
- new dynamic header firmware format support
- wake-over-WLAN support"
* tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits)
ipvs: fix type warning in do_div() on 32 bit
net: lan966x: Remove a useless test in lan966x_ptp_add_trap()
net: ipa: add IPA v4.7 support
dt-bindings: net: qcom,ipa: Add SM6350 compatible
bnxt: Use generic HBH removal helper in tx path
IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver
selftests: forwarding: Add bridge MDB test
selftests: forwarding: Rename bridge_mdb test
bridge: mcast: Support replacement of MDB port group entries
bridge: mcast: Allow user space to specify MDB entry routing protocol
bridge: mcast: Allow user space to add (*, G) with a source list and filter mode
bridge: mcast: Add support for (*, G) with a source list and filter mode
bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source
bridge: mcast: Add a flag for user installed source entries
bridge: mcast: Expose __br_multicast_del_group_src()
bridge: mcast: Expose br_multicast_new_group_src()
bridge: mcast: Add a centralized error path
bridge: mcast: Place netlink policy before validation functions
bridge: mcast: Split (*, G) and (S, G) addition into different functions
bridge: mcast: Do not derive entry type from its filter mode
...
|
||
|
Linus Torvalds
|
c5589c436d |
regulator: Updates for v6.2
Quite a quiet release for regulator, the diffstat is dominated by the
I2C migration to probe_new() and the newly added MT6357 driver. We've
just one framework addition and the rest is all new device support,
fixes and cleanups.
The framework addition is an API for requesting all regulators defined
in DT, this isn't great practice but has reasonable applications when
there is generic code handling devices on buses where the bus
specification doesn't include power. The immediate application is MDIO
but I believe there's others, it's another API that'll need an eye
keeping on it for undesirable usage.
- An API for requesting all regulators defined in DT.
- Conversion of lots of drivers to the I2C probe_new() API.
- Support for Mediatek MT6357, Qualcomm PM8550, PMR735a and
Richtek RT6190.
There's a cross tree merge with the I2C tree in order to use the new
i2c_client_get_device_id() helper in the conversions to probe_new().
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmOXIIcACgkQJNaLcl1U
h9DW8Af/SkLjUIhuMYrln1QBKvJfMOzAIOo8LeCRCU6E8IxsDu/zccEva6dqr/M/
DFkq5VBCH7cX7VIvaHLjED/VdM0n+JG35tzwv83TVuAohLW/qsRdO6RE9IRBJcUd
7wUj2gjUBjjnCwbpI0hTygqQHvIxO0deQVYoQsxF8VwJTQ+ufpA3TJ3tmxqeWvbd
N/qkLohCk9NoFgiMjzBxBonacaZEvHkjUtqRthHm/nx8Mdu9NhBb6ai6KIpN7EJD
CaY+nUOx/cW8YJWBaZ32bcnvRgtanJGWn+p49/JmUCu0lIEOX2r7jds/kBo/hWWl
akGDUTcmvZY0CfrJfbx+FJxcA1A7Jg==
=Dmpg
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"Quite a quiet release for regulator, the diffstat is dominated by the
I2C migration to probe_new() and the newly added MT6357 driver. We've
just one framework addition and the rest is all new device support,
fixes and cleanups.
The framework addition is an API for requesting all regulators defined
in DT, this isn't great practice but has reasonable applications when
there is generic code handling devices on buses where the bus
specification doesn't include power. The immediate application is MDIO
but I believe there's others, it's another API that'll need an eye
keeping on it for undesirable usage.
Summary:
- An API for requesting all regulators defined in DT
- Conversion of lots of drivers to the I2C probe_new() API
- Support for Mediatek MT6357, Qualcomm PM8550, PMR735a and Richtek
RT6190"
* tag 'regulator-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (56 commits)
regulator: core: Use different devices for resource allocation and DT lookup
dt-bindings: Add missing 'unevaluatedProperties' to regulator nodes
regulator: qcom-labibb: Fix missing of_node_put() in qcom_labibb_regulator_probe()
regulator: add mt6357 regulator
regulator: dt-bindings: Add binding schema for mt6357 regulators
regulator: core: fix resource leak in regulator_register()
regulator: core: fix module refcount leak in set_supply()
regulator: core: fix use_count leakage when handling boot-on
regulator: rk808: Use dev_err_probe
regulator: rk808: reduce 'struct rk808' usage
regulator: Drop obsolete dependencies on COMPILE_TEST
regulator: pv88080-regulator: Convert to i2c's .probe_new()
regulator: pfuze100-regulator: Convert to i2c's .probe_new()
regulator: isl6271a-regulator: Convert to i2c's .probe_new()
regulator: fan53555: Convert to i2c's .probe_new()
regulator: act8865-regulator: Convert to i2c's .probe_new()
regulator: qcom-rpmh: Add support for PM8550 regulators
regulator: dt-bindings: qcom,rpmh: Add compatible for PM8550
regulator: tps65023-regulator: Convert to i2c's .probe_new()
regulator: tps62360-regulator: Convert to i2c's .probe_new()
...
|
||
|
Lorenzo Bianconi
|
d878d3dc12 |
wifi: mt76: mt7915: get rid of wed rx_buf_ring page_frag_cache
Since wed rx_buf_ring page_frag_cache is no longer used in a hot path, remove it and rely on page allocation APIs in mt7915_mmio_wed_init_rx_buf() and mt7915_mmio_wed_release_rx_buf() Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> |
||
|
Arnd Bergmann
|
9379885d07 |
More Qualcomm driver updates for 6.2
Socinfo is extended with knowledge about MSM8956, MSM8976, SM6115, SM4250, SM8150, SA8155 and SM8550. Support for RSC v3, as found in SM8550 is added to the RPMH RSC driver. Support for SM8550 and SM4250 ARC regulators are added to the RPM(h) power-domain drivers. SM8550 support is added to the LLCC driver. The AOSS QMP binding is declared compatible for SM8550. BWMON and LLCC now selects REGMAP_MMIO to ensure dependencies are built properly. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmOQtA8VHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FJl4QAJjmeWGK7Su6PNEn1ayFbFsPE6M1 tVrWc122vTayvIH2yK2Q0g2vGmYUwiTrigNCRh0jfWVJvlk4MFcIFMM13R7UFXA5 OcCC44SuaeBdbwlHrrhgUolWisSlyfFPiB+YIbR0L9I/fZgp5ayu30wJjHKBPyxu sNImIs7yDfMg9bDE3VkwqVq/wF+FnPBhJQFEV4+sMMlXJxuFvkjtgVil9iXDZc4z aOCsbs1IrMHGuMm/LUN8yeYmusqFpMHR3lGp+7/OwKclUkVzt59j1CyhWORXmnpF vh0Zyepj4qtKlADxy2jg52w0H3LWma75mnp4x9Dt6NziZ7EBOVT6yQgSQZEXmZ11 FuIkz0+itsz/TkY8K+iMtnGgxMdCui1WNWNMkwXC4ETnJaZZnsZ42g7fLWN5cJYg g9GV24rMTrS+chYHRCQCtNXXwl+At5II8vnPuRP8W0fowCwqvOCB3VIoLqXiiUyG At6n6M0nazykLV19QvC2jgNFr5fhvHMRZ69rV7uQKuTrLblijzWF52cP3wlEPtzb tiRYiNagbIpvD2Jsov3vqC5nzSJaj6zFh1m88dmP2Nb7vBawfwvVEJEuqrWY1AGu 0DjmgE+dmbjwJw5KV9XbS3+U/PBIHWCgjGPs8CUOeHjK01nbPnHgpjMUHLyTFSCn Q1q9S5Wb75MNR5z2 =MwgS -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmORAKQACgkQmmx57+YA GNm4pA//WhEcmFPkzGy1CZejxvdDSlNzcL3q1nL+YEE2jRYfe7/FLbtDUcrENioQ htfF2d4zBf0Y5+cPQhBhsYnShTQKpaesotZ421wLI1XOR+yNA+zfOuukRPB1HGfn v2TvSiROlaxJfhXv/4Wv/UKpl/ud4alVIuqsW0ah68bL+1A2loj4rKPuwTBCjynR HMz5QQ0+UD8vBBFITM6qVQ1OLA3TdkLEBT7beSHXsSpBkGJ/jdeoGsF/XV6uigaM i2CRPDNTZzBN8XkGb/95sJXOWFDmr28DJe4OQOnqYNSDZey4udvIS1MxgGw6h2je nCKb8O6faYquvcxA2HIR46ywvKtQh/S54HJPPyqZPvZlqJe8LFTCdHzwo4HNcMTh S/7GIpJV5QwJH5tK/YRW+P2cnRmMfGoCcXlCelH6vgYYXeyZjdNmFaZH59h/PnX9 e03cZehDMs1laZrhF4AZsdDcwu5AzMMpP4jHG7IoSM0H1BB6n7aQCVGMWWxSI876 Y7xz7s93brnYwCTIJnM/nG+wuFe0ITavTKozbEWoMEfMb69w/fqMH6F11SJWZY+P LLywtFMhwsE7MEK8ZuWWLlseQG4a0AXljRE+DwVn1Kn53fjIKnZm6gPOUtjsoIgV mxmJRwJjCixZYWOIK60i5AsEwkwars9wmGIxjvPKy2USVVHPnO0= =u7Q7 -----END PGP SIGNATURE----- Merge tag 'qcom-drivers-for-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers More Qualcomm driver updates for 6.2 Socinfo is extended with knowledge about MSM8956, MSM8976, SM6115, SM4250, SM8150, SA8155 and SM8550. Support for RSC v3, as found in SM8550 is added to the RPMH RSC driver. Support for SM8550 and SM4250 ARC regulators are added to the RPM(h) power-domain drivers. SM8550 support is added to the LLCC driver. The AOSS QMP binding is declared compatible for SM8550. BWMON and LLCC now selects REGMAP_MMIO to ensure dependencies are built properly. * tag 'qcom-drivers-for-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: soc: qcom: socinfo: Add SM6115 / SM4250 SoC IDs to the soc_id table dt-bindings: arm: qcom,ids: Add SoC IDs for SM6115 / SM4250 and variants soc: qcom: socinfo: Add SM8150 and SA8155 SoC IDs to the soc_id table dt-bindings: arm: qcom,ids: Add SoC IDs for SM8150 and SA8155 dt-bindings: soc: qcom: apr: document generic qcom,apr compatible soc: qcom: Select REMAP_MMIO for ICC_BWMON driver soc: qcom: Select REMAP_MMIO for LLCC driver soc: qcom: rpmpd: Add SM4250 support dt-bindings: power: rpmpd: Add SM4250 support dt-bindings: soc: qcom: aoss: Add compatible for SM8550 soc: qcom: llcc: Add configuration data for SM8550 dt-bindings: arm: msm: Add LLCC compatible for SM8550 soc: qcom: llcc: Add v4.1 HW version support soc: qcom: socinfo: Add SM8550 ID soc: qcom: rpmh-rsc: Avoid unnecessary checks on irq-done response soc: qcom: rpmh-rsc: Add support for RSC v3 register offsets soc: qcom: rpmhpd: Add SM8550 power domains dt-bindings: power: rpmpd: Add SM8550 to rpmpd binding soc: qcom: socinfo: Add MSM8956/76 SoC IDs to the soc_id table dt-bindings: arm: qcom,ids: Add SoC IDs for MSM8956 and MSM8976 Link: https://lore.kernel.org/r/20221207154134.3233779-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Lorenzo Bianconi
|
ed883bec67 |
net: ethernet: mtk_wed: add reset to rx_ring_setup callback
This patch adds reset parameter to mtk_wed_rx_ring_setup signature
in order to align rx_ring_setup callback to tx_ring_setup one introduced
in 'commit 23dca7a90017 ("net: ethernet: mtk_wed: add reset to
tx_ring_setup callback")'
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/29c6e7a5469e784406cf3e2920351d1207713d05.1670239984.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Abel Vesa
|
8c045cd216 |
soc: qcom: llcc: Add configuration data for SM8550
Add LLCC configuration data for SM8550 SoC. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221116113005.2653284-4-abel.vesa@linaro.org |
||
|
Lorenzo Bianconi
|
23dca7a900 |
net: ethernet: mtk_wed: add reset to tx_ring_setup callback
Introduce reset parameter to mtk_wed_tx_ring_setup signature. This is a preliminary patch to add Wireless Ethernet Dispatcher reset support. Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Lorenzo Bianconi
|
f78cd9c783 |
net: ethernet: mtk_wed: update mtk_wed_stop
Update mtk_wed_stop routine and rename old mtk_wed_stop() to mtk_wed_deinit(). This is a preliminary patch to add Wireless Ethernet Dispatcher reset support. Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Sujuan Chen
|
a66d79ee0b |
net: ethernet: mtk_wed: add wcid overwritten support for wed v1
All wed versions should enable the wcid overwritten feature, since the wcid size is controlled by the wlan driver. Tested-by: Sujuan Chen <sujuan.chen@mediatek.com> Co-developed-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Lorenzo Bianconi
|
4c5de09eb0 |
net: ethernet: mtk_wed: add configure wed wo support
Enable RX Wireless Ethernet Dispatch available on MT7986 Soc. Tested-by: Daniel Golle <daniel@makrotopia.org> Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Lorenzo Bianconi
|
084d60ce0c |
net: ethernet: mtk_wed: rename tx_wdma array in rx_wdma
Rename tx_wdma queue array in rx_wdma since this is rx side of wdma soc. Moreover rename mtk_wed_wdma_ring_setup routine in mtk_wed_wdma_rx_ring_setup() Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Sujuan Chen
|
cc514101a9 |
net: ethernet: mtk_wed: introduce wed mcu support
Introduce WED mcu support used to configure WED WO chip. This is a preliminary patch in order to add RX Wireless Ethernet Dispatch available on MT7986 SoC. Tested-by: Daniel Golle <daniel@makrotopia.org> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Konrad Dybcio
|
0cda8c43aa
|
regulator: qcom_smd: Add PMR735a regulators
PMR735a is already supported in the RPMH regulator driver, but there are cases where it's bundled with SMD RPM SoCs. Port it over to qcom_smd-regulator to enable usage in such cases. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20221109110846.45789-2-konrad.dybcio@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Xinlei Lee
|
e6c7e6216d |
soc: mediatek: Add all settings to mtk_mmsys_ddp_dpi_fmt_config func
The difference between MT8186 and other ICs is that when modifying the
output format, we need to modify the mmsys_base+0x400 register to take
effect. So when setting the dpi output format, we need to call
mtk_mmsys_ddp_dpi_fmt_config to set it to MT8186 synchronously.
Commit a071e52f75d1 ("soc: mediatek: Add mmsys func to adapt to dpi
output for MT8186") lacked some of the possible output formats and also
had a wrong bitmask.
Add the missing output formats and fix the bitmask.
While at it, also update mtk_mmsys_ddp_dpi_fmt_config() to use generic
formats, so that it is slightly easier to extend for other platforms.
Fixes: a071e52f75d1 ("soc: mediatek: Add mmsys func to adapt to dpi output for MT8186")
Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
||
|
Linus Torvalds
|
bdc753c7fc |
Here's the main clk pull request for this merge window. We have some
late breaking reports that a patch series to rework clk rate range
support broke boot on some devices, so I've left that branch out of this
PR. Hopefully we can get to that next week, or punt on it and let it
bake another cycle. That means we don't really have any changes to the
core framework this time around besides a few typo fixes. Instead this
is all clk driver updates and fixes.
The usual suspects are here (again), with Qualcomm dominating the
diffstat. We look to have gained support for quite a few new Qualcomm
SoCs and Dmitry worked on updating many of the existing Qualcomm drivers
to use clk_parent_data. After that we have MediaTek drivers getting some
much needed updates, in particular to support GPU DVFS. There are also
quite a few Samsung clk driver patches, but that's mostly because there
was a maintainer change and so last release we missed some of those
patches.
Overall things look normal, but I'm slowly reviewing core framework code
nowadays and that shows given the rate range patches had to be yanked
last minute. Let's hope this situation changes soon.
New Drivers:
- Support for Renesas VersaClock7 clock generator family
- Add Spreadtrum UMS512 SoC clk support
- New clock drivers for MediaTek Helio X10 MT6795
- Display clks for Qualcomm SM6115, SM8450
- GPU clks for Qualcomm SC8280XP
- Qualcomm MSM8909 and SM6375 global and SMD RPM clk drivers
Deleted Drivers:
- Remove DaVinci DM644x and DM646x clk driver support
Updates:
- Convert Baikal-T1 CCU driver to platform driver
- Split reset support out of primary Baikal-T1 CCU driver
- Add some missing clks required for RPiVid Video Decoder on RaspberryPi
- Mark PLLC critical on bcm2835
- More devm helpers for fixed rate registration
- Various PXA168 clk driver fixes
- Add resets for MediaTek MT8195 PCIe and USB
- Miscellaneous of_node_put() fixes
- Nuke dt-bindings/clk path (again) by moving headers to dt-bindings/clock
- Convert gpio-clk-gate binding to YAML
- Various fixes to AMD/Xilinx Zynqmp clk driver
- Graduate AMD/Xilinx "clocking wizard" driver from staging
- Add missing DPI1_HDMI clock in MT8195 VDOSYS1
- Clock driver changes to support GPU DVFS on MT8183, MT8192, MT8195
- Fix GPU clock topology on MT8195
- Propogate rate changes from GPU clock gate up the tree
- Clock mux notifiers for GPU-related PLLs
- Conversion of more "simple" drivers to mtk_clk_simple_probe()
- Hook up mtk_clk_simple_remove() for "simple" MT8192 clock drivers
- Fixes to previous |struct clk| to |struct clk_hw| conversion on MediaTek
- Shrink MT8192 clock driver by deduplicating clock parent lists
- Change order between 'sim_enet_root_clk' and 'enet_qos_root_clk'
clocks for i.MX8MP
- Drop unnecessary newline in i.MX8MM dt-bindings
- Add more MU1 and SAI clocks dt-bindings Ids
- Introduce slice busy bit check for i.MX93 composite clock
- Introduce white list bit check for i.MX93 composite clock
- Add new i.MX93 clock gate
- Add MU1 and MU2 clocks to i.MX93 clock provider
- Add SAI IPG clocks to i.MX93 clock provider
- add generic clocks for U(S)ART available on SAMA5D2 SoCs
- reset controller support for Polarfire clocks
- .round_rate and .set rate support for clk-mpfs
- code cleanup for clk-mpfs
- PLL support for PolarFire SoC's Clock Conditioning Circuitry
- Add watchdog, I2C, pin control/GPIO, and Ethernet clocks on R-Car V4H
- Add SDHI, Timer (CMT/TMU), and SPI (MSIOF) clocks on R-Car S4-8
- Add I2C clocks and resets on RZ/V2M
- Document clock support for the RZ/Five SoC
- mux-variant clock using the table variant to select parents
- clock controller for the rv1126 soc
- conversion of rk3128 to yaml and relicensing of the yaml bindings
to gpl2+MIT (following dt-binding guildelines)
- Exynos7885: add FSYS, TREX and MFC clock controllers
- Exynos850: add IS and AUD (audio) clock controllers with bindings
- ExynosAutov9: add FSYS clock controllers with bindings
- ExynosAutov9: correct clock IDs in bindings of Peric 0 and 1 clock
controllers, due to duplicated entries. This is an acceptable ABI
break: recently developed/added platform so without legacies, acked
by known users/developers
- ExynosAutov9: add few missing Peric 0/1 gates
- ExynosAutov9: correct register offsets of few Peric 0/1 clocks
- Minor code improvements (use of_device_get_match_data() helper, code
style)
- Add Krzysztof Kozlowski as co-maintainer of Samsung SoC clocks, as he
already maintainers that architecture/platform
- Keep Qualcomm GDSCs enabled when PWRSTS_RET flag is there, solving retention
issues during suspend of USB on Qualcomm sc7180/sc7280 and SC8280XP
- Qualcomm SM6115 and QCM2260 are moved to reuse PLL configuration
- Qualcomm SDM660 SDCC1 moved to floor clk ops
- Support for the APCS PLLs for Qualcomm IPQ8064, IPQ8074 and IPQ6018 was
added/fixed
- The Qualcomm MSM8996 CPU clocks are updated with support for ACD
- Support for Qualcomm SDM670 GCC and RPMh clks was added
- Transition to parent_data, parent_hws and use of ARRAY_SIZE() for
num_parents was done for many Qualcomm SoCs
- Support for per-reset defined delay on Qualcomm was introduced
-----BEGIN PGP SIGNATURE-----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=9jI+
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"We have some late breaking reports that a patch series to rework clk
rate range support broke boot on some devices, so I've left that
branch out of this. Hopefully we can get to that next week, or punt on
it and let it bake another cycle. That means we don't really have any
changes to the core framework this time around besides a few typo
fixes. Instead this is all clk driver updates and fixes.
The usual suspects are here (again), with Qualcomm dominating the
diffstat. We look to have gained support for quite a few new Qualcomm
SoCs and Dmitry worked on updating many of the existing Qualcomm
drivers to use clk_parent_data. After that we have MediaTek drivers
getting some much needed updates, in particular to support GPU DVFS.
There are also quite a few Samsung clk driver patches, but that's
mostly because there was a maintainer change and so last release we
missed some of those patches.
Overall things look normal, but I'm slowly reviewing core framework
code nowadays and that shows given the rate range patches had to be
yanked last minute. Let's hope this situation changes soon.
New Drivers:
- Support for Renesas VersaClock7 clock generator family
- Add Spreadtrum UMS512 SoC clk support
- New clock drivers for MediaTek Helio X10 MT6795
- Display clks for Qualcomm SM6115, SM8450
- GPU clks for Qualcomm SC8280XP
- Qualcomm MSM8909 and SM6375 global and SMD RPM clk drivers
Deleted Drivers:
- Remove DaVinci DM644x and DM646x clk driver support
Updates:
- Convert Baikal-T1 CCU driver to platform driver
- Split reset support out of primary Baikal-T1 CCU driver
- Add some missing clks required for RPiVid Video Decoder on
RaspberryPi
- Mark PLLC critical on bcm2835
- More devm helpers for fixed rate registration
- Various PXA168 clk driver fixes
- Add resets for MediaTek MT8195 PCIe and USB
- Miscellaneous of_node_put() fixes
- Nuke dt-bindings/clk path (again) by moving headers to
dt-bindings/clock
- Convert gpio-clk-gate binding to YAML
- Various fixes to AMD/Xilinx Zynqmp clk driver
- Graduate AMD/Xilinx "clocking wizard" driver from staging
- Add missing DPI1_HDMI clock in MT8195 VDOSYS1
- Clock driver changes to support GPU DVFS on MT8183, MT8192, MT8195
- Fix GPU clock topology on MT8195
- Propogate rate changes from GPU clock gate up the tree
- Clock mux notifiers for GPU-related PLLs
- Conversion of more "simple" drivers to mtk_clk_simple_probe()
- Hook up mtk_clk_simple_remove() for "simple" MT8192 clock drivers
- Fixes to previous |struct clk| to |struct clk_hw| conversion on
MediaTek
- Shrink MT8192 clock driver by deduplicating clock parent lists
- Change order between 'sim_enet_root_clk' and 'enet_qos_root_clk'
clocks for i.MX8MP
- Drop unnecessary newline in i.MX8MM dt-bindings
- Add more MU1 and SAI clocks dt-bindings Ids
- Introduce slice busy bit check for i.MX93 composite clock
- Introduce white list bit check for i.MX93 composite clock
- Add new i.MX93 clock gate
- Add MU1 and MU2 clocks to i.MX93 clock provider
- Add SAI IPG clocks to i.MX93 clock provider
- add generic clocks for U(S)ART available on SAMA5D2 SoCs
- reset controller support for Polarfire clocks
- .round_rate and .set rate support for clk-mpfs
- code cleanup for clk-mpfs
- PLL support for PolarFire SoC's Clock Conditioning Circuitry
- Add watchdog, I2C, pin control/GPIO, and Ethernet clocks on R-Car
V4H
- Add SDHI, Timer (CMT/TMU), and SPI (MSIOF) clocks on R-Car S4-8
- Add I2C clocks and resets on RZ/V2M
- Document clock support for the RZ/Five SoC
- mux-variant clock using the table variant to select parents
- clock controller for the rv1126 soc
- conversion of rk3128 to yaml and relicensing of the yaml bindings
to gpl2+MIT (following dt-binding guildelines)
- Exynos7885: add FSYS, TREX and MFC clock controllers
- Exynos850: add IS and AUD (audio) clock controllers with bindings
- ExynosAutov9: add FSYS clock controllers with bindings
- ExynosAutov9: correct clock IDs in bindings of Peric 0 and 1 clock
controllers, due to duplicated entries. This is an acceptable ABI
break: recently developed/added platform so without legacies, acked
by known users/developers
- ExynosAutov9: add few missing Peric 0/1 gates
- ExynosAutov9: correct register offsets of few Peric 0/1 clocks
- Minor code improvements (use of_device_get_match_data() helper,
code style)
- Add Krzysztof Kozlowski as co-maintainer of Samsung SoC clocks, as
he already maintainers that architecture/platform
- Keep Qualcomm GDSCs enabled when PWRSTS_RET flag is there, solving
retention issues during suspend of USB on Qualcomm sc7180/sc7280
and SC8280XP
- Qualcomm SM6115 and QCM2260 are moved to reuse PLL configuration
- Qualcomm SDM660 SDCC1 moved to floor clk ops
- Support for the APCS PLLs for Qualcomm IPQ8064, IPQ8074 and IPQ6018
was added/fixed
- The Qualcomm MSM8996 CPU clocks are updated with support for ACD
- Support for Qualcomm SDM670 GCC and RPMh clks was added
- Transition to parent_data, parent_hws and use of ARRAY_SIZE() for
num_parents was done for many Qualcomm SoCs
- Support for per-reset defined delay on Qualcomm was introduced"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (283 commits)
clk: qcom: gcc-sm6375: Ensure unsigned long type
clk: qcom: gcc-sm6375: Remove unused variables
clk: qcom: kpss-xcc: convert to parent data API
clk: introduce (devm_)hw_register_mux_parent_data_table API
clk: allow building lan966x as a module
clk: clk-xgene: simplify if-if to if-else
clk: ast2600: BCLK comes from EPLL
clk: clocking-wizard: Depend on HAS_IOMEM
clk: clocking-wizard: Use dev_err_probe() helper
clk: nxp: fix typo in comment
clk: pxa: add a check for the return value of kzalloc()
clk: vc5: Add support for IDT/Renesas VersaClock 5P49V6975
dt-bindings: clock: vc5: Add 5P49V6975
clk: mvebu: armada-37xx-tbg: Remove the unneeded result variable
clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probe
clk: Renesas versaclock7 ccf device driver
dt-bindings: Renesas versaclock7 device tree bindings
clk: ti: Balance of_node_get() calls for of_find_node_by_name()
clk: imx: scu: fix memleak on platform_device_add() fails
clk: vc5: Use regmap_{set,clear}_bits() where appropriate
...
|
||
|
Linus Torvalds
|
ff6862c23d |
ARM: driver updates for 6.1
The drivers branch for 6.1 is a bit larger than for most releases. Most
of the changes come from SoC maintainers for the drivers/soc subsystem:
- A new driver for error handling on the NVIDIA Tegra
'control backbone' bus.
- A new driver for Qualcomm LLCC/DDR bandwidth measurement
- New Rockchip rv1126 and rk3588 power domain drivers
- DT binding updates for memory controllers, older Rockchip
SoCs, various Mediatek devices, Qualcomm SCM firmware
- Minor updates to Hisilicon LPC bus, the Allwinner SRAM
driver, the Apple rtkit firmware driver, Tegra firmware
- Minor updates for SoC drivers (Samsung, Mediatek, Renesas,
Tegra, Qualcomm, Broadcom, NXP, ...)
There are also some separate subsystem with downstream maintainers that
merge updates this way:
- Various updates and new drivers in the memory controller
subsystem for Mediatek and Broadcom SoCs
- Small set of changes in preparation to add support for FF-A
v1.1 specification later, in the Arm FF-A firmware subsystem
- debugfs support in the PSCI firmware subsystem
-----BEGIN PGP SIGNATURE-----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=WX9J
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"The drivers branch for 6.1 is a bit larger than for most releases.
Most of the changes come from SoC maintainers for the drivers/soc
subsystem:
- A new driver for error handling on the NVIDIA Tegra 'control
backbone' bus.
- A new driver for Qualcomm LLCC/DDR bandwidth measurement
- New Rockchip rv1126 and rk3588 power domain drivers
- DT binding updates for memory controllers, older Rockchip SoCs,
various Mediatek devices, Qualcomm SCM firmware
- Minor updates to Hisilicon LPC bus, the Allwinner SRAM driver, the
Apple rtkit firmware driver, Tegra firmware
- Minor updates for SoC drivers (Samsung, Mediatek, Renesas, Tegra,
Qualcomm, Broadcom, NXP, ...)
There are also some separate subsystem with downstream maintainers
that merge updates this way:
- Various updates and new drivers in the memory controller subsystem
for Mediatek and Broadcom SoCs
- Small set of changes in preparation to add support for FF-A v1.1
specification later, in the Arm FF-A firmware subsystem
- debugfs support in the PSCI firmware subsystem"
* tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (149 commits)
ARM: remove check for CONFIG_DEBUG_LL_SER3
firmware/psci: Add debugfs support to ease debugging
firmware/psci: Print a warning if PSCI doesn't accept PC mode
dt-bindings: memory: snps,dw-umctl2-ddrc: Extend schema with IRQs/resets/clocks props
dt-bindings: memory: snps,dw-umctl2-ddrc: Replace opencoded numbers with macros
dt-bindings: memory: snps,dw-umctl2-ddrc: Use more descriptive device name
dt-bindings: memory: synopsys,ddrc-ecc: Detach Zynq DDRC controller support
soc: sunxi: sram: Add support for the D1 system control
soc: sunxi: sram: Export the LDO control register
soc: sunxi: sram: Save a pointer to the OF match data
soc: sunxi: sram: Return void from the release function
soc: apple: rtkit: Add apple_rtkit_poll
soc: imx: add i.MX93 media blk ctrl driver
soc: imx: add i.MX93 SRC power domain driver
soc: imx: imx8m-blk-ctrl: Use genpd_xlate_onecell
soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets
soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl
soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR
soc: imx: add icc paths for i.MX8MP hsio/hdmi blk ctrl
soc: imx: add icc paths for i.MX8MP media blk ctrl
...
|
||
|
Konrad Dybcio
|
644c422955 |
clk: qcom: smd: Add SM6375 clocks
Add support for controlling SMD RPM clocks on SM6375. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220921004458.151842-3-konrad.dybcio@somainline.org |
||
|
Arnd Bergmann
|
37d49c249c |
Qualcomm driver updates for 6.1
The icc-bwmon driver is expected to support measuring LLCC/DDR bandwidth on SDM845 and SC7280. The LLCC driver is extended to provide per-platform register mappings to the LLCC EDAC driver. The QMI encoder/decoder is updated to allow the passed qmi_elem_info to be const. Support for SDM845 is added to the sleep stats driver. Power-domains for the SM6375 platform is added to RPMPD and the platform is added to socinfo, together with the PM6125 pmic id. A couple of of_node reference issues are corrected in the smem state and smsm drivers. The Qualcomm SCM driver binding is converted to YAML. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmMrMtQVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3Foy8P/3xNqiQAVdWD/49rycmoNg02Jg6A L9WM0GI1TMKCJV+tr2QFFknFOzTxr4VhIefddUWWJYGnzN89sHqYbWjBbnPaHVv/ Im7opHZ1Aq5hPct5TvlXrMjNDhe3+2y44qv4+H9q8Kk7nOVUQwOfE3J7VE71B1tO gLHEdlafSH+M62PJsiDQRIgtU2jfFBBpOC+J4OazvRsYQboI29U5Aro08Yqy/KFq opEMJlnetzPl1zI+7Tu56V8gVWnBIedQJJCT/EZEWMJ8Lf8XMbuTaTrW+ioSnjrT SyLgAzvLCI8yMOaLSssdpk6pgtsMleqRI/SHlvUX2+sUlxK3Gycw9rxsU6RJ80gk SRjYXEwr78w4QGcC/eY8Lg+d0xi/A1MOMGLYoQGyKzHtyi+q1x3yQQ5HW6YS0qlO J6a9zSL2PNfLyXv7DE1PblKUZtifV/8U+gYviwe09Rj7mkZWzlOC946uUp4B9VEE R96qoLZtyvgAzBCnpWIJ0IwYSRdqVNYpDKKb4CGQ9qAdyHZIg+DL9i6vozwWsyZk gRTXo4K9MuqHya+vZYOH4zyi8eIHgqdSNSbo/4893E3GcAtPBw1YRdCPWNPITdQg bcTfg/7bFymeHN3arbkXjclXp1O12JA+umsPnRnWtmmoCPNqh8wki4v32dqcpyQq FvkQpszZbeHQGxq4 =R/5I -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmMt02wACgkQmmx57+YA GNlEyw/+Je0NXWJdKYHw9+nkc5GJCrB7Sytz9xmavB/1JMTDyjMcRgbmXg0gl1ZF 6gYACVcv1GgIFFrDrjEHm81qVunjr+z3oyqY/Tr4XDk2AvFJicX/kltSOxWozHrV TYGd3HtneGMA6jhT7T76b849N4p0S9gJu62+tQiD2wa31oFAnfhrf790QJZahHZf /VPGiNiOhINMJJk+rUal8R4A8CWXdx9GTTulhcSD3g9HPTWJuq+SJ6SSCuNmOLPO 4KZeWytBmihSWIjWsyuKUwSmK1ceNH/Vt6QhenPUZynZ4ojuJOUeOTnkf+mR6M2A ysetlsi8GDiQSWW/hb/+b733YFOTVVFbigEjt6B40HKLAXlgiAqwCVzWFQ61Eg48 UNnx26RUlT3PGw0oF1pSOvl8a/0DDKhzteyQSJQ/gR59SKLjhwEB27Ml1C2B+VVM FHn0WnhnAvC6qPBrRh6HUVtoqblRsaT6UJ+qwr6TDhmiDMTmQP49dMbA9Me+lphb ACbhqk+yUoaYhq6oK2pneqtgP0A4QuFSZAzGE6tXryILYeme+LOpL2ff2NNAsY5C 6jX+6oyAZVSmJKs0itQyTyQqmJ/5bFp8ob5dpwNeFMLgRvohpDh/EChjkTV7N0EU NK12FkJIvDptBFMOClVx5PurCLPwG4cI2/qIZ8xHuEdzrpELYgI= =GSE8 -----END PGP SIGNATURE----- Merge tag 'qcom-drivers-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers Qualcomm driver updates for 6.1 The icc-bwmon driver is expected to support measuring LLCC/DDR bandwidth on SDM845 and SC7280. The LLCC driver is extended to provide per-platform register mappings to the LLCC EDAC driver. The QMI encoder/decoder is updated to allow the passed qmi_elem_info to be const. Support for SDM845 is added to the sleep stats driver. Power-domains for the SM6375 platform is added to RPMPD and the platform is added to socinfo, together with the PM6125 pmic id. A couple of of_node reference issues are corrected in the smem state and smsm drivers. The Qualcomm SCM driver binding is converted to YAML. * tag 'qcom-drivers-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (29 commits) soc: qcom: rpmpd: Add SM6375 support dt-bindings: power: rpmpd: Add SM6375 power domains firmware: qcom: scm: remove unused __qcom_scm_init declaration dt-bindings: power: qcom,rpmpd: drop non-working codeaurora.org emails soc: qcom: icc-bwmon: force clear counter/irq registers soc: qcom: icc-bwmon: add support for sc7280 LLCC BWMON dt-bindings: interconnect: qcom,msm8998-bwmon: Add support for sc7280 BWMONs soc: qcom: llcc: Pass LLCC version based register offsets to EDAC driver soc: qcom: llcc: Rename reg_offset structs to reflect LLCC version soc: qcom: qmi: use const for struct qmi_elem_info soc: qcom: icc-bwmon: remove redundant ret variable dt-bindings: soc: qcom: stats: Document SDM845 compatible soc: qcom: stats: Add SDM845 stats config and compatible dt-bindings: firmware: document Qualcomm SM6115 SCM soc: qcom: Make QCOM_RPMPD depend on OF dt-bindings: firmware: convert Qualcomm SCM binding to the yaml soc: qcom: socinfo: Add PM6125 ID soc: qcom: socinfo: Add an ID for SM6375 soc: qcom: smem_state: Add refcounting for the 'state->of_node' soc: qcom: smsm: Fix refcount leak bugs in qcom_smsm_probe() ... Link: https://lore.kernel.org/r/20220921155753.1316308-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
b49aae5e94 |
pmic-wrapper:
- add support for mt8188 SVS: - several driver cleanups power-domain: - several cleanups of the dt-bindings and driver mutex: - add support to mt6795 disp mutex - add support for mt8186 mdp3 mutex -----BEGIN PGP SIGNATURE----- iQJLBAABCAA1FiEEUdvKHhzqrUYPB/u8L21+TfbCqH4FAmMoQzkXHG1hdHRoaWFz LmJnZ0BnbWFpbC5jb20ACgkQL21+TfbCqH7kHhAAl+iz82nrJIqXh9B3jdALvYvw 2gyYuQh8Q2d0gJ1V4qi9tIonCagwcDAg1e5JAX061wteOHQCTDUHT+vXcy6FqdGr NsmV//nL31dyvxiErnApDyxGhyF1iQqmVMLGp8cJNlwgB7qOYJ1cfhpiPmHo2X7h wST6BipxcGZ/Fmp4tZfsOEylK1RUkY/lrYGoeujUso7qGxZOmcNAfioClMSpvwvn oum+bmR5DHbCOsFWGnSyjKn1zsAR7BOLITSv2RoJXDMqcYhLPd04CVyraXPLl4RR 0kHbxv6ST1N+nTCmuo5/SWzQsSYlFg3C3ACrIPUBEyxnwaaXbfPiszlRoO4SejGR S1+reCm7cSvtXK2ZLAcs9gFrQnUR6IvvPazbgTIz0mvlV1W1hwxJvtCEjHB9mqfB wCqQZQc5LbEfLLIvMtpm5rid7Hh70NFXFmZJ4/oiDr6StUiNM2hMBkjE55iMT2VN K1uaLqMOYjJCCQ0YZi6LuTuNXjjr/hprF2eOKi/V34qqCCLxrPByEUO1PPAQ6DRk iypNxzkTVr9ow0FkflPhSm1eRU7513wC3oMNCklPIUCtueKMA+h8pnD387TCQqk2 baFS+HyylIQV2X223ksNDHf2KibDVY2zwoZhgChyk/cltG4f1y06Vzulcyj73I9/ QyUXHkmeiuLuvdl3uW8= =VKXT -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmMt0qsACgkQmmx57+YA GNl9RQ//XeoILNZpG0kc3rFq6Pc4o7LrUToOtDrM2eccmuHlYuDFXZog00vy2Vpc zQuJwMwWwDe6B+OdxkvQfTZkOknB/4lXanR8lbbmZRNCQ+DMdh4aAzquYepPK8q6 SVaRxDWFq3YQkY3KtULYebNfN7SvTGBgL2ZiIub87hWGVrdLFY2/jujPTJJPhzZR Yer0nRSwaHxfS93xhKyNVsgglBba5S1c27MWJV6LZOy01e/CRdjZsLAZ+FvwAv3u i50xSgJSCEHGI7+wOYD4thpiyvkHBgyFblsQpHGRe/KtBNhtibv/GCSpes0hK4t0 w6zSvsVmAvh1rcBY0ZgC8xZDFtzw9EPXZ7Je+T1wqBAO/tZrrQ8K4pllECjLwoA4 rqfrIOz0wEg4gHBRyiOr5IfCJsFWsZxc4pJaD6o7G5qC1E2vrGbnlP7iv53hez+T p4qXX7MrkBAMegN4z5FMqZQ3Jj8ktiP2QowDZPJGmcCcSUqvC0NUg3B3s9CLRUH+ 57JWyL5I+/35ehdsGeS1mAuhvvk8c401nqI/K8fJWsdbIl75S2lG8WgdgBoc1Lui RF23StWpIe/R05YQD2vDJIyEg+2dmJ1bAe9vaC31D4BTP9qIb71H5qoPNyfsW7Ka iaz4TOwaSmev+U18lkKNhVxKEFAsL+189DNXRvl2R00Rrd/Embk= =64Bh -----END PGP SIGNATURE----- Merge tag 'v6.0-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers pmic-wrapper: - add support for mt8188 SVS: - several driver cleanups power-domain: - several cleanups of the dt-bindings and driver mutex: - add support to mt6795 disp mutex - add support for mt8186 mdp3 mutex * tag 'v6.0-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: soc: mediatek: Add mmsys func to adapt to dpi output for MT8186 soc: mediatek: mutex: Add support for MT6795 Helio X10 display mutex dt-bindings: soc: mediatek: Add display mutex support for MT6795 soc: mediatek: mutex: Add mt8186 mutex mod settings for mdp3 dt-bindings: soc: mediatek: Add mdp3 mutex support for mt8186 soc: mediatek: pm-domains: Simplify some error message soc: mediatek: mtk-svs: Explicitly include bitfield header soc: mediatek: mtk-svs: Use bitfield access macros where possible soc: mediatek: mtk-svs: Commonize t-calibration-data fuse array read dt-bindings: power: mediatek: Update maintainer list dt-bindings: power: mediatek: Support naming power controller node with unit address dt-bindings: power: mediatek: Refine multiple level power domain nodes soc: mediatek: mtk-svs: Use devm variant for dev_pm_opp_of_add_table() soc: mediatek: mtk-svs: Drop of_match_ptr() for of_match_table soc: mediatek: mtk-svs: Remove hardcoded irqflags soc: mediatek: mtk-svs: Switch to platform_get_irq() dt-bindings: soc: mediatek: pwrap: add compatible for mt8188 soc: mediatek: Let PMIC Wrapper and SCPSYS depend on OF Link: https://lore.kernel.org/r/498fe3e5-a237-121a-d500-fbb0994906cb@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
891518b717 |
sunxi SRAM driver changes:
- minor code refactor - support for Allwinner D1 -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQSPRixG1tysKC2PKM10Ba7+DO8kkwUCYyeKsgAKCRB0Ba7+DO8k k1X1AQDo4koVgAH3uPXHj9dDUtOy8bcuf2cj2ZwjYtPEseWdVgD+JTh2fty584qq 7n2vFdGr0AAAD5L/1u5kiSvJlOCrVAk= =GqoJ -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmMt0mkACgkQmmx57+YA GNlmShAAkIsFHmlEs3MOjHCNCIulvQjqBcChYfvoVEN22HLr2wSvQqLtpYQ65bjB wV2ktJZXUNjCIzTNE16N2hErvFEhQ0mbPg2PKiIny2UiNjb+amJbdaJbfmwuDptr q23WDbTu3WApBzyfsTpW+YThC0EXx+cD3hg3i1KNtAnlUjkeuG3oDphqr7Hp+8E4 NQTgD7mj6IJsEx4J7+GDYgNdIiGybgmRind6nW8svnmSo6Wx1p1Hty5mjsjeKlnb A/14D0qSGu8z3pRIcxnYESnicacyzUILyAOZ1+UUh7oU29ymQQPIH/uXTDO4id4e llaR/RoOCjg/OmYPWpxu50Wb0vsx71JRbHnxtpdvjYUd1nAakK2C5AA1NwMEAzex Zh17w/C9WkmfSTbcvk7njRtxEl29QhEeJ3kZPYqWdt7cwvRX4wYjg84Xb7Axkbq9 fuLiaTw81YbVx91wEzW2vLUBCnBXYxkf9KPdaeK8KrR6pvzKfdzify2zzjw68Vy1 f6PpF0CSDiNbgha6w9MH8D6Fp/MOkBWnjmMadlWFA3zX7ymoVbIT+v28CgXhw4rw 7LSGi+p3jVObVwhgDLGSyL5xbTbxmW37aTyBfANOwT7Qj7D2zz9HqYb07jWV5oIP e0ixr9dmcF96cPB1CBUPomnay8f0XKD2E/DVxn/Kdjn1Hl5O0k8= =Fmcq -----END PGP SIGNATURE----- Merge tag 'sunxi-drivers-for-6.1-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/drivers sunxi SRAM driver changes: - minor code refactor - support for Allwinner D1 * tag 'sunxi-drivers-for-6.1-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: soc: sunxi: sram: Add support for the D1 system control soc: sunxi: sram: Export the LDO control register soc: sunxi: sram: Save a pointer to the OF match data soc: sunxi: sram: Return void from the release function soc: sunxi: sram: Fix debugfs info for A64 SRAM C soc: sunxi: sram: Fix probe function ordering issues soc: sunxi: sram: Prevent the driver from being unbound soc: sunxi: sram: Actually claim SRAM regions Link: https://lore.kernel.org/r/YyeOthH4y8wy8A8R@kista.localdomain Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Lorenzo Bianconi
|
2b2ba3ecb2 |
net: ethernet: mtk_eth_wed: add axi bus support
Other than pcie bus, introduce support for axi bus to mtk wed driver. Axi bus is used to connect mt7986-wmac soc chip available on mt7986 device. Tested-by: Daniel Golle <daniel@makrotopia.org> Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Lorenzo Bianconi
|
de84a090d9 |
net: ethernet: mtk_eth_wed: add wed support for mt7986 chipset
Introduce Wireless Etherne Dispatcher support on transmission side for mt7986 chipset Tested-by: Daniel Golle <daniel@makrotopia.org> Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Samuel Holland
|
460d9cb62f |
soc: sunxi: sram: Return void from the release function
There is no point in returning an error here, as the caller can do nothing about it. In fact, all callers already ignore the return value. Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20220815041248.53268-8-samuel@sholland.org Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> |
||
|
Hector Martin
|
f5a5e83379 |
soc: apple: rtkit: Add apple_rtkit_poll
This allows a client to receive messages in atomic context, by polling. Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Sven Peter <sven@svenpeter.dev> Reviewed-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Xinlei Lee
|
b404cb4599 |
soc: mediatek: Add mmsys func to adapt to dpi output for MT8186
Add mmsys func to manipulate dpi output format config for MT8186. Co-developed-by: Jitao Shi <jitao.shi@mediatek.com> Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com> Reviewed-by: Nís F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/all/1663161662-1598-2-git-send-email-xinlei.lee@mediatek.com/ Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> |
||
|
Allen-KH Cheng
|
21370ecddf |
soc: mediatek: mutex: Add mt8186 mutex mod settings for mdp3
Add mt8186 mutex mod settings for mdp3. Co-developed-by: Xiandong Wang <xiandong.wang@mediatek.com> Signed-off-by: Xiandong Wang <xiandong.wang@mediatek.com> Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220831172151.10215-3-allen-kh.cheng@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> |
||
|
Chengci.Xu
|
4e508b259e |
memory: mtk-smi: Add enable IOMMU SMC command for MM master
For concerns about security, the register to enable/disable IOMMU of SMI LARB should only be configured in secure world. Thus, we add some SMC command for multimedia master to enable/disable MM IOMMU in ATF by setting the register of SMI LARB. This function is prepared for MT8188. Signed-off-by: Chengci.Xu <chengci.xu@mediatek.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220817124608.10062-4-chengci.xu@mediatek.com |
||
|
Bjorn Andersson
|
d820048361 |
v6.0-rc1 +
20220825043859.30066-2-manivannan.sadhasivam@linaro.org + 20220825043859.30066-3-manivannan.sadhasivam@linaro.org -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmMNdEEVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FkiYP/02o4/t9/60E7vEDZBZLOE30P51d ehSqeBmb1Pah5nC2OaLNW4LYw9dBX7zWSCWFgV/be6WhUnOGpNawfpG8kF2bZsXg Z4uBoUm3dYQh8R0K88d3dgYOVEwrtO8mItRPw5iwnaqjDOcBiDX2EBbr05sp3TUe sh8hr9HbtN6SRrwKHHWi6oyh7oieflJfBw7yJxPWPfsCIGcpC6GiYuherbCbX9TC 9rr2m6DluwfS5OEIbQ8i9i1KKouNCEEec/Gn6Gq11SmveufUvjI053XEkD0lr2FB ibpiku8LVDS9FXmKm8kDpiP3SYTL/UAFJPzbj0oJfCNSWKyjmeYjg1XCGYU19LHR YqmS6znHoTDj6DaFnIs2eVXwW7N51f3b3LRjdWBVwKoYqQHdKXYPSiKxV9fjq7il LFIuJoYBwvnoawk3AGK8xyiE24aKYevze2qz3xK7X6lJLKSd3ywDkG6s63ZZcm8N B5E4vILXVe/SvGajuJSdYmFlVTi5SPCGxfA8MhaSTx9SGKebMEtczhPnrwqtFr0o 0H22dBoDhk/TNzI6giJUvPQPA5ii6/gUEbV7rJPpkOWoMsSHoV7fD9PdUItLfoZP IBmsBmvl0BiP0xx/DEgiSJz6f6xnbvwbBl+Ig9d320TuBOsIEq+vmQzmoDS4DwGB Ye2ddphnXqRNV/Wp =nFe6 -----END PGP SIGNATURE----- Merge tag '20220825043859.30066-3-manivannan.sadhasivam@linaro.org' into drivers-for-6.1 v6.0-rc1 + 20220825043859.30066-2-manivannan.sadhasivam@linaro.org + 20220825043859.30066-3-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> |
||
|
Manivannan Sadhasivam
|
c13d7d261e |
soc: qcom: llcc: Pass LLCC version based register offsets to EDAC driver
The LLCC EDAC register offsets varies between each SoCs. Until now, the EDAC driver used the hardcoded register offsets. But this caused crash on SM8450 SoC where the register offsets has been changed. So to avoid this crash and also to make it easy to accommodate changes for new SoCs, let's pass the LLCC version specific register offsets to the EDAC driver. Currently, two set of offsets are used. One is starting from LLCC version v1.0.0 used by all SoCs other than SM8450. For SM8450, LLCC version starting from v2.1.0 is used. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220825043859.30066-3-manivannan.sadhasivam@linaro.org |
||
|
Jeff Johnson
|
ff6d365898 |
soc: qcom: qmi: use const for struct qmi_elem_info
Currently all usage of struct qmi_elem_info, which is used to define the QMI message encoding/decoding rules, does not use const. This prevents clients from registering const arrays. Since these arrays are always pre-defined, they should be const, so add the const qualifier to all places in the QMI interface where struct qmi_elem_info is used. Once this patch is in place, clients can independently update their pre-defined arrays to be const, as demonstrated in the QMI sample code. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220822153435.7856-1-quic_jjohnson@quicinc.com |
||
|
Linus Torvalds
|
c1c76700a0 |
SPDX changes for 6.0-rc1
Here is the set of SPDX comment updates for 6.0-rc1. Nothing huge here, just a number of updated SPDX license tags and cleanups based on the review of a number of common patterns in GPLv2 boilerplate text. Also included in here are a few other minor updates, 2 USB files, and one Documentation file update to get the SPDX lines correct. All of these have been in the linux-next tree for a very long time. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYupz3g8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynPUgCgslaf2ssCgW5IeuXbhla+ZBRAzisAnjVgOvLN 4AKdqbiBNlFbCroQwmeQ =v1sg -----END PGP SIGNATURE----- Merge tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here is the set of SPDX comment updates for 6.0-rc1. Nothing huge here, just a number of updated SPDX license tags and cleanups based on the review of a number of common patterns in GPLv2 boilerplate text. Also included in here are a few other minor updates, two USB files, and one Documentation file update to get the SPDX lines correct. All of these have been in the linux-next tree for a very long time" * tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits) Documentation: samsung-s3c24xx: Add blank line after SPDX directive x86/crypto: Remove stray comment terminator treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE ... |
||
|
Moudy Ho
|
e5758850c2 |
soc: mediatek: mutex: add functions that operate registers by CMDQ
Due to HW limitations, MDP3 is necessary to enable MUTEX in each frame for SOF triggering and cooperate with CMDQ control to reduce the amount of interrupts generated(also, reduce frame latency). In response to the above situation, a new interface "mtk_mutex_enable_by_cmdq" has been added to achieve the purpose. Signed-off-by: Moudy Ho <moudy.ho@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Link: https://lore.kernel.org/r/20220610063424.7800-7-moudy.ho@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> |
||
|
Moudy Ho
|
d0804085c5 |
soc: mediatek: mutex: add common interface for modules setting
In order to allow multiple modules to operate MUTEX hardware through a common interfrace, two flexible indexes "mtk_mutex_mod_index" and "mtk_mutex_sof_index" need to be added to replace original component ID so that like DDP and MDP can add their own MOD table or SOF settings independently. In addition, 2 generic interface "mtk_mutex_write_mod" and "mtk_mutex_write_sof" have been added, which is expected to replace the "mtk_mutex_add_comp" and "mtk_mutex_remove_comp" pair originally dedicated to DDP in the future. Signed-off-by: Moudy Ho <moudy.ho@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Link: https://lore.kernel.org/r/20220610063424.7800-2-moudy.ho@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> |
||
|
Thomas Gleixner
|
5a729246e5 |
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE
Based on the normalized pattern:
this program is free software you can redistribute it and/or modify it
under the terms of the gnu general public license version 2 as
published by the free software foundation this program is distributed
as is without any warranty of any kind whether express or implied
without even the implied warranty of merchantability or fitness for a
particular purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference.
Reviewed-by: Allison Randal <allison@lohutok.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Thomas Gleixner
|
2aec85b26f |
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_30.RULE (part 2)
Based on the normalized pattern:
this program is free software you can redistribute it and/or modify it
under the terms of the gnu general public license as published by the
free software foundation version 2 this program is distributed as is
without any warranty of any kind whether express or implied without
even the implied warranty of merchantability or fitness for a
particular purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference.
Reviewed-by: Allison Randal <allison@lohutok.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Linus Torvalds
|
96479c0980 |
ARM: multiplatform changes, part 2
The second part of the multiplatform changes now converts the Intel/Marvell PXA platform along with the rest. The patches went through several rebases before the merge window as bugs were found, so they remained separate. This has to touch a lot of drivers, in particular the touchscreen, pcmcia, sound and clk bits, to detach the driver files from the platform and board specific header files. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmKZKqsACgkQmmx57+YA GNnO/w//dgJBlkmoIIKlG2eJsvoUKwDt7MuLEMCqSqYYUSvMENFwKK66INMDIJ3l PmKf94JadlpBm2OB2vzW+D1EtaLGX9eXZkKD+vyB1I1yFkKdzEPcAfitfrRwe58E pR4nQd/jVL4UCY+pp442O1q9VvMpMV9P4ILJGPS/PpsD5CT9Gn8m9svIIuNuDRFd nwpyZC3l32jVLo9iuLmwZUvxtOWI3hTqZrnxhByBhlvtnGexRsq/VhfubK2uzBi1 CyWHjqzOSmseGmsUDwv9LFqVV9YRCeisS3IElA5L0VgM0XvHKA+f9qyF7V6zI20g y9LtqhdAtiTpE/aUrOW2LDYaM/bc7RilYZrWchoZbCEsHhV4C+ld3QoTyxvGscvG tbznhvZKdUNX8LHS0J9NqIj1q1YGN5ei5r/C5R8DBj1q8VcTVnq3dms8xzVTd35o xS5BbLFliiI96jc7S6LaQizXheYjAfdPhmXUAxNXvWIVQ6SXnf8/U/RB9Zzjb8hm FH2Gu8m/Dh2MHKBBRWSVw8VahV0V7WiEaWeYuwwTbW1wUrsWiizVaPnqrt6Cq9DW oJZgBvktWEXUQz73qrnvwo9GjcKqAxaWKWq05hHKHKuLGezsPAyIhIKr51V2xqqw cp2OIMCsN5GYENOhHvt6BMRAI5iA4VyFDtWAqw9B6EIwno6N7Z4= =cnSb -----END PGP SIGNATURE----- Merge tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull more ARM multiplatform updates from Arnd Bergmann: "The second part of the multiplatform changes now converts the Intel/Marvell PXA platform along with the rest. The patches went through several rebases before the merge window as bugs were found, so they remained separate. This has to touch a lot of drivers, in particular the touchscreen, pcmcia, sound and clk bits, to detach the driver files from the platform and board specific header files" * tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits) ARM: pxa/mmp: remove traces of plat-pxa ARM: pxa: convert to multiplatform ARM: pxa/sa1100: move I/O space to PCI_IOBASE ARM: pxa: remove support for MTD_XIP ARM: pxa: move mach/*.h to mach-pxa/ ARM: PXA: fix multi-cpu build of xsc3 ARM: pxa: move plat-pxa to drivers/soc/ ARM: mmp: rename pxa_register_device ARM: mmp: remove tavorevb board support ARM: pxa: remove unused mach/bitfield.h ARM: pxa: move clk register definitions to driver ARM: pxa: move smemc register access from clk to platform cpufreq: pxa3: move clk register access to clk driver ARM: pxa: remove get_clk_frequency_khz() ARM: pxa: pcmcia: move smemc configuration back to arch ASoC: pxa: i2s: use normal MMIO accessors ASoC: pxa: ac97: use normal MMIO accessors ASoC: pxa: use pdev resource for FIFO regs Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops Input: wm97xx - switch to using threaded IRQ ... |
||
|
Linus Torvalds
|
b00ed48bb0 |
dmaengine updates for v5.19-rc1
New support: - Tegra gpcdma Driver support - Qualcomm SM8350, Sm8450 and SC7280 Device support - Renesas RZN1 dma and platform support Updates: - stm32 device pause/resume support and updates - DMA memset ops Documentation and usage clarification - Deprecate '#dma-channels' & '#dma-requests' bindings - Driver updates for stm32, ptdma idsx etc -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmKTr5oACgkQfBQHDyUj g0ePBw//UP+A+PPvTdQdlq/spO9Hb76lB1UZ7x7nVsObovyO2hxQl61b5Xo9o8eH 0VIIVB9OU4ysp8eX5Y6m7CUFKa/4MyUSU1HKdspseoap3JKg1EAHEGdhjR++V/dF mqPN7VvmTbW8YDQ6b7Xz/mZedxOSJZL+wltCT2AQGLV1PD+BPZyBfkPl9NarpaX6 OeKatnMiJlZwFjQeVijiqCUx0xZV0G1XfQJDIEzRaBBvYAiHYTjbPUBZVsu5BjoC 70HtxhDKHJu0JFPa91gm7rqhj8XTKFoIGQU7jZqlpgr1IoYvfnotHoQeURa3yviZ lZ6oW0+Y3RKyCcMH5iir2YEGdeaDXEPRb1YS/rz1vcf9b8JNqxXuM9i8Z2EXCVjd qVxC9HzVCBh5EHuJGi1DFoHMrw/NXUanbWqW8C0FzqqTcqvp6DceAgzqcd1FJjwl lgZM7Y5r0WXMzbbhOeOQP34ps+mY17rsBn210K/H75fZW8kTsdwiCOL4VlaK1p/z CCJPYXkxEChbrIYoshXNTqg61bt9F2sEgJ+7FFUbUUOTLlQKFJUZ7fuoU896rDto GndspWpxaslgAzdPuWSKBeR+b9IubgLgKF1BKSTYR6coyUt+hRJFiAx1juAOYbHe CrJat0luP+hELgt1f2TjyYYZFj9Wc84tnqI+ThzXK0GyEN4Ax1c= =ANxH -----END PGP SIGNATURE----- Merge tag 'dmaengine-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "Nothing special, this includes a couple of new device support and new driver support and bunch of driver updates. New support: - Tegra gpcdma driver support - Qualcomm SM8350, Sm8450 and SC7280 device support - Renesas RZN1 dma and platform support Updates: - stm32 device pause/resume support and updates - DMA memset ops Documentation and usage clarification - deprecate '#dma-channels' & '#dma-requests' bindings - driver updates for stm32, ptdma idsx etc" * tag 'dmaengine-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (87 commits) dmaengine: idxd: make idxd_wq_enable() return 0 if wq is already enabled dmaengine: sun6i: Add support for the D1 variant dmaengine: sun6i: Add support for 34-bit physical addresses dmaengine: sun6i: Do not use virt_to_phys dt-bindings: dma: sun50i-a64: Add compatible for D1 dmaengine: tegra: Remove unused switch case dmaengine: tegra: Fix uninitialized variable usage dmaengine: stm32-dma: add device_pause/device_resume support dmaengine: stm32-dma: rename pm ops before dma pause/resume introduction dmaengine: stm32-dma: pass DMA_SxSCR value to stm32_dma_handle_chan_done() dmaengine: stm32-dma: introduce stm32_dma_sg_inc to manage chan->next_sg dmaengine: stm32-dmamux: avoid reset of dmamux if used by coprocessor dmaengine: qcom: gpi: Add support for sc7280 dt-bindings: dma: pl330: Add power-domains dmaengine: stm32-mdma: use dev_dbg on non-busy channel spurious it dmaengine: stm32-mdma: fix chan initialization in stm32_mdma_irq_handler() dmaengine: stm32-mdma: remove GISR1 register dmaengine: ti: deprecate '#dma-channels' dmaengine: mmp: deprecate '#dma-channels' dmaengine: pxa: deprecate '#dma-channels' and '#dma-requests' ... |
||
|
Linus Torvalds
|
ecf0aa5317 |
ARM: ARMv4T/v5 multiplatform support for v5.19, part 1
This series has been 12 years in the making, it mostly finishes the work that was started with the founding of Linaro to clean up platform support in the kernel. The largest change here is a cleanup of the omap1 platform, which is the final ARM machine type to get converted to the common-clk subsystem. All the omap1 specific drivers are now made independent of the mach/*.h headers to allow the platform to be part of a generic ARMv4/v5 multiplatform kernel. The last bit that enables this support is still missing here while we wait for some last dependencies to make it into the mainline kernel through other subsystems. The s3c24xx, ixp4xx, iop32x, ep93xx and dove platforms were all almost at the point of allowing multiplatform kernels, this work gets completed here along with a few additional cleanup. At the same time, the s3c24xx and s3c64xx are now deprecated and expected to get removed in the future. The PXA and OMAP1 bits are in a separate branch because of dependencies. Once both branches are merged, only the three Intel StrongARM platforms (RiscPC, Footbridge/NetWinder and StrongARM1100) need separate kernels, and there are no plans to include these. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmKOP3sACgkQmmx57+YA GNk+DhAAmrPNuS8JDlCRPa76Nd9PC9aitnnEGYytQ6bgwexKd3qdvP7gdUtr7jlV 8k4KiGnnZZjEGd4i5cAVhSCyBbCt4oPKhato62KneEsO19xLsVmmTpQg1LPK75do mHYKpc+6932Lp6WrtI1F75id0phx684tpZp9P4ggXwMwgYkagq9rcO+mGUNZWDc8 D9SdAmoObtSCoBCYYbq2VhAPA79mSKKVpLGehzd+Gq5cuf/jJQD0u1E00izkdyZc r/5acQ7PHQlVXqSONYgCpkvDTqmjg9cvVCKeKLpFspV3f6vBVRgV60UGfwhpdPHY N119KUJtPf81xnLSxsqBFA34LMSerrH72YM5cYupKiiYcTDr+Yw6zrtNR6ktkt/B F1Tc/QV+A9CGergxljy39G1smEuwKtNiVA//NSlUORCHxgwa5XUB0mQIzNcWARa4 oMDLhBF7ES211CB7Yto2FR6gBQbh2A9HSpjOh6kxdHrRb4FCgoXjPhzBoMxPoSFu XIzJpMb18K4bI+hKRYddEOK5V0kHt9mzT7ViGT/2+n13IHKIGmKrZxwDH7mohAW9 4GF77gGbQsE9szajkx5EG1t+PWextQeeMyYW05bXO/mbDwA0n7EdjGpBeedvTZw3 6gUWVahfYp9hZWPdxJ4fbGnlbSovCq0y4tj5fbZHPh6AOAtmvWY= =CTtN -----END PGP SIGNATURE----- Merge tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARMv4T/v5 multiplatform support from Arnd Bergmann: "This series has been 12 years in the making, it mostly finishes the work that was started with the founding of Linaro to clean up platform support in the kernel. The largest change here is a cleanup of the omap1 platform, which is the final ARM machine type to get converted to the common-clk subsystem. All the omap1 specific drivers are now made independent of the mach/*.h headers to allow the platform to be part of a generic ARMv4/v5 multiplatform kernel. The last bit that enables this support is still missing here while we wait for some last dependencies to make it into the mainline kernel through other subsystems. The s3c24xx, ixp4xx, iop32x, ep93xx and dove platforms were all almost at the point of allowing multiplatform kernels, this work gets completed here along with a few additional cleanup. At the same time, the s3c24xx and s3c64xx are now deprecated and expected to get removed in the future. The PXA and OMAP1 bits are in a separate branch because of dependencies. Once both branches are merged, only the three Intel StrongARM platforms (RiscPC, Footbridge/NetWinder and StrongARM1100) need separate kernels, and there are no plans to include these" * tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits) ARM: ixp4xx: Consolidate Kconfig fixing issue ARM: versatile: Add missing of_node_put in dcscb_init ARM: config: Refresh IXP4xx config after multiplatform ARM: omap1: add back omap_set_dma_priority() stub ARM: omap: fix missing declaration warnings ARM: omap: fix address space warnings from sparse ARM: spear: remove include/mach/ subdirectory ARM: davinci: remove include/mach/ subdirectory ARM: omap2: remove include/mach/ subdirectory integrator: remove empty ap_init_early() ARM: s3c: fix include path MAINTAINERS: omap1: Add Janusz as an additional maintainer ARM: omap1: htc_herald: fix typos in comments ARM: OMAP1: fix typos in comments ARM: OMAP1: clock: Remove noop code ARM: OMAP1: clock: Remove unused code ARM: OMAP1: clock: Fix UART rate reporting algorithm ARM: OMAP1: clock: Fix early UART rate issues ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF ARM: omap1: fix build with no SoC selected ... |
||
|
Linus Torvalds
|
cc3c470ae4 |
ARM: driver changes for 5.19
There are minor updates to SoC specific drivers for chips by Rockchip,
Samsung, NVIDIA, TI, NXP, i.MX, Qualcomm, and Broadcom. Noteworthy
driver changes include:
- Several conversions of DT bindings to yaml format.
- Renesas adds driver support for R-Car V4H, RZ/V2M and RZ/G2UL SoCs.
- Qualcomm adds a bus driver for the SSC (Snapdragon Sensor Core),
and support for more chips in the RPMh power domains and the soc-id.
- NXP has a new driver for the HDMI blk-ctrl on i.MX8MP.
- Apple M1 gains support for the on-chip NVMe controller, making it
possible to finally use the internal disks. This also includes SoC
drivers for their RTKit IPC and for the SART DMA address filter.
For other subsystems that merge their drivers through the SoC tree,
we have
- Firmware drivers for the ARM firmware stack including TEE, OP-TEE,
SCMI and FF-A get a number of smaller updates and cleanups. OP-TEE
now has a cache for firmware argument structures as an optimization,
and SCMI now supports the 3.1 version of the specification.
- Reset controller updates to Amlogic, ASpeed, Renesas and ACPI drivers
- Memory controller updates for Tegra, and a few updates for other
platforms.
-----BEGIN PGP SIGNATURE-----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=XoLF
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"There are minor updates to SoC specific drivers for chips by Rockchip,
Samsung, NVIDIA, TI, NXP, i.MX, Qualcomm, and Broadcom.
Noteworthy driver changes include:
- Several conversions of DT bindings to yaml format.
- Renesas adds driver support for R-Car V4H, RZ/V2M and RZ/G2UL SoCs.
- Qualcomm adds a bus driver for the SSC (Snapdragon Sensor Core),
and support for more chips in the RPMh power domains and the
soc-id.
- NXP has a new driver for the HDMI blk-ctrl on i.MX8MP.
- Apple M1 gains support for the on-chip NVMe controller, making it
possible to finally use the internal disks. This also includes SoC
drivers for their RTKit IPC and for the SART DMA address filter.
For other subsystems that merge their drivers through the SoC tree, we
have
- Firmware drivers for the ARM firmware stack including TEE, OP-TEE,
SCMI and FF-A get a number of smaller updates and cleanups. OP-TEE
now has a cache for firmware argument structures as an
optimization, and SCMI now supports the 3.1 version of the
specification.
- Reset controller updates to Amlogic, ASpeed, Renesas and ACPI
drivers
- Memory controller updates for Tegra, and a few updates for other
platforms"
* tag 'arm-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (159 commits)
memory: tegra: Add MC error logging on Tegra186 onward
memory: tegra: Add memory controller channels support
memory: tegra: Add APE memory clients for Tegra234
memory: tegra: Add Tegra234 support
nvme-apple: fix sparse endianess warnings
soc/tegra: pmc: Document core domain fields
soc: qcom: pdr: use static for servreg_* variables
soc: imx: fix semicolon.cocci warnings
soc: renesas: R-Car V3U is R-Car Gen4
soc: imx: add i.MX8MP HDMI blk-ctrl
soc: imx: imx8m-blk-ctrl: Add i.MX8MP media blk-ctrl
soc: imx: add i.MX8MP HSIO blk-ctrl
soc: imx: imx8m-blk-ctrl: set power device name
soc: qcom: llcc: Add sc8180x and sc8280xp configurations
dt-bindings: arm: msm: Add sc8180x and sc8280xp LLCC compatibles
soc/tegra: pmc: Select REGMAP
dt-bindings: reset: st,sti-powerdown: Convert to yaml
dt-bindings: reset: st,sti-picophyreset: Convert to yaml
dt-bindings: reset: socfpga: Convert to yaml
dt-bindings: reset: snps,axs10x-reset: Convert to yaml
...
|
||
|
Linus Torvalds
|
c011dd537f |
ARM: updates for 32-bit SoCs
These updates are for platform specific code in arch/arm/, mostly fixing minor issues. The at91 platform gains support for better power management on the lan966 platform and new firmware on the sama5 platform. The mediatek soc drivers in turn are enabled for the new mt8195 SoC. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmKORHMACgkQmmx57+YA GNnKYA//QhTTZePOMqHZHBVU4dqJuHrjd+rwME5u7a6hqSe3VYaFao6LF+P5fAzR IWk8svgCJLIdRx4tnA+kE7LIBsJoPwXYxhGUlgM5CfrxYClQuofnWP58Z+EbIAXx VIboLBW1Anw5y7zw+0JkB01DMuGzDDFnUJ4Y+0M3aW3VGC8wJXc+dM+t8BWOn7OW DNTcXfJgkRJBtzT++tMU4Z7Kmn//i4xohuT7dwJW4vvIfTL350Bl5Z1EHGnScfMk HgbJD5iF7Z12jj7ureuWengr/MN1eAPs18ZdWRcmo4Ie5IDWB50dMoYifjp/tslO oXRODrGCuX9yOjcjleGU1mAbb7zqoaThZcbI0yjVOaVwyU0fQR9NFJTqmSEEX97p LPZHU1CtAjRns7BW3ons9wPhy4s1xSPopJaHiXDwMMzAlx+kTcoFlFFvWCSlrcOC MMo+eN1BQ3SbIxi3Ji3p6MnmSLIiE/wq4nKCEagKAv+AjtqRXYDIsT+28A96Xgeo 1R5agDamDMp0h6ZrhHMGSIgppWe+qvX14Jp3Hw0Nocgdyf8ABDR9H3/gZasXKbZu LrbNLn3vNVKTMn9YpM0T94Uwf0nFPH6MOzFVmjahRute3TU7ioSXxbVPpNuiOkXj RFXe1YUoILjLJgHZSUEpdHP+meGUjeScHTQt6jV97WfTeq2ZALg= =Eoh1 -----END PGP SIGNATURE----- Merge tag 'arm-soc-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull 32-bit ARM SoC updates from Arnd Bergmann: "These updates are for platform specific code in arch/arm/, mostly fixing minor issues. The at91 platform gains support for better power management on the lan966 platform and new firmware on the sama5 platform. The mediatek soc drivers in turn are enabled for the new mt8195 SoC" * tag 'arm-soc-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (34 commits) ARM: at91: debug: add lan966 support ARM: at91: pm: add support for sama5d2 secure suspend ARM: at91: add code to handle secure calls ARM: at91: Kconfig: implement PIT64B selection ARM: at91: pm: add quirks for pm ARM: at91: pm: use kernel documentation style ARM: at91: pm: introduce macros for pm mode replacement ARM: at91: pm: keep documentation inline with structure members orion5x: fix typos in comments ARM: hisi: Add missing of_node_put after of_find_compatible_node ARM: shmobile: rcar-gen2: Drop comma after OF match table sentinel ARM: shmobile: Drop commas after dt_compat sentinels soc: mediatek: mutex: remove mt8195 MOD0 and SOF0 definition MAINTAINERS: Add Broadcom BCMBCA entry arm: bcmbca: add arch bcmbca machine entry MAINTAINERS: Broadcom internal lists aren't maintainers dt-bindings: pwrap: mediatek: Update pwrap document for mt8195 soc: mediatek: add DDP_DOMPONENT_DITHER0 enum for mt8195 vdosys0 soc: mediatek: add mtk-mutex support for mt8195 vdosys0 soc: mediatek: add mtk-mmsys support for mt8195 vdosys0 ... |
||
|
Miquel Raynal
|
885525c1e7 |
clk: renesas: r9a06g032: Export function to set dmamux
The dmamux register is located within the system controller. Without syscon, we need an extra helper in order to give write access to this register to a dmamux driver. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220427095653.91804-5-miquel.raynal@bootlin.com Signed-off-by: Vinod Koul <vkoul@kernel.org> |
||
|
Arnd Bergmann
|
3f656f2618 |
Qualcomm driver updates for v5.19
This converts a wide range of Qualcomm-related DeviceTree bindings to YAML, in order to improve our ability to validate the DeviceTree source. The RPMh power-domain driver gains support for the modem platform SDX65, the compute platform SC8280XP and the automotive platform SA8540p. While LLCC gains support for SC8180X and SC8280XP and gains a MODULE_DEVICE_TABLE() to make it functional as a module. It adds a driver for configuring the SSC bus, providing Linux access to the hardware blocks in the sensor subsystem. The socinfo driver gets confusion related to MSM8974 Pro sorted out and adds new ids for SM8540 and SC7280. The SCM driver gains support for MSM8974. Add missing of_node_put() in smp2p and smsm drivers. Stop using iterator after list_for_each_entry() and define static definitions as such, in the PDR driver. -----BEGIN PGP SIGNATURE----- iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmJ5WsYbHGJqb3JuLmFu ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FIo8P+wcc78TQQuG67nqPr2gb QFqVK8U2mz07XW0H1rnGZKsTSrZxFs/YWRBaw+dYC5OZVJHx/uoZM04Njsyy/DFh UaNQgTgsS4+D5+butveh4lBdmk4ja5sreLHw25/azw5VBzeHb9+4HeAd7QMMQ+BO /EvIlykPwsgGIZwabzDHkY8w/xt64CPiajps1qGlFDJedSLsdJ8bKHctvcFD03v3 3utJku3jAc5SZMBQgDttpPwpn7UnHXjCvWxyz8oSFaWDQBROztH0FbiJsZnjMuFI 9RfRqblgb2PkvaG23W7jv68aJf3yQ6siY8ezPPs3/1F6T6tMQaAKEhwrY93ZQiWc gDDx33TvX3YJiRRdC2Gvg1QpL4xMFUERR8o4ooQ0t+b8bG6TkGP44VVg3/n1wrMK Q5xdgDigfrNnVZV1b2flQHc4qke4hNoV23SQ7iFWvtSJO09xklVJhXFGQ6mthEkb PnBFurLyxglKw6afs1/2P8tplS52K0l19lgNJu6vtUzC6fMOg50cX0mmWP8+rkFb njhXlPqCDataECZazyxnn7KORAn3E7zQceJ/LJeV+XZ9i5DJLXup+JkuBCWem4Nd ucEeYtQVRel5FCWZZzkXviPCTlWgTB7ya7pJPCzvZpnNFHeSWSjr9YK6xtWwy9rP CBRXYrz2gJLV/MGkB1piAwkm =/Dqp -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmJ5hB4ACgkQmmx57+YA GNksBxAAj09+d2U1sFSJl3HiHTrXyg3MYoG0dA1QK2CRKucdwMf6KBGpEHTQyL6a Iqan6URrTqEM3WP4suBsZh8vbv1C8u7KGWwDAMqJ18BkigoGHEV1PyvmHYRvPoT2 6DSHAkGbYfDglxXZ4JcxNaQk3+t6rZpe5LcRRgQ7JpoKfzlqKxfSJfPFLzYAvhSV qThiyd3GvfcgkVHL9noh4BrBrnNRj7wMzUwQnhW5aWebN+DqgG8zlzmmZEQx61uR sjMogRZNpGXVAR+4yvPZNoxTGM0plssxlkDQGS4b0XLP1t7ohr22eFPTrWqcsYCi h4fa3nXxUIoTDJXQ7nmU04VXp5xVUtQKKe+zXIvQBT98OkM1f6ep5i7rrEh5DZxJ TWVdRLuIVpHVsVARqq+qpEnwyDeiF3Hgmope3xPYhEIs1WcIOQzWBjHbNTNeiFdy fQMrmAQjirXJBV18ImRSMcAXW+Shc72vnj6fViQcrL5Pzj1HJFMjh/bpPzAhIUYJ w9to8mpNgHUpMwnkfMUqQDV6FANVbYPqancK/z4rEPd8mj6bq1z2GEQq2e9+cAfM imyD30+g7fm7e4mxp53mv/oxqf4NJExE0eIjXAQY53at0TCk+ngsxJd96Wz3aIpB eL9YN5x+y6vXkFC+hsnX2/QdUiVCmfpbrez2QqzoZncSkJ4mjdI= =rjVH -----END PGP SIGNATURE----- Merge tag 'qcom-drivers-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers Qualcomm driver updates for v5.19 This converts a wide range of Qualcomm-related DeviceTree bindings to YAML, in order to improve our ability to validate the DeviceTree source. The RPMh power-domain driver gains support for the modem platform SDX65, the compute platform SC8280XP and the automotive platform SA8540p. While LLCC gains support for SC8180X and SC8280XP and gains a MODULE_DEVICE_TABLE() to make it functional as a module. It adds a driver for configuring the SSC bus, providing Linux access to the hardware blocks in the sensor subsystem. The socinfo driver gets confusion related to MSM8974 Pro sorted out and adds new ids for SM8540 and SC7280. The SCM driver gains support for MSM8974. Add missing of_node_put() in smp2p and smsm drivers. Stop using iterator after list_for_each_entry() and define static definitions as such, in the PDR driver. * tag 'qcom-drivers-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits) soc: qcom: pdr: use static for servreg_* variables soc: qcom: llcc: Add sc8180x and sc8280xp configurations dt-bindings: arm: msm: Add sc8180x and sc8280xp LLCC compatibles soc: qcom: rpmhpd: add sc8280xp & sa8540p rpmh power-domains soc: qcom: rpmhpd: Don't warn about sparse rpmhpd arrays dt-bindings: power: rpmpd: Add sc8280xp RPMh power-domains spi: dt-bindings: qcom,spi-geni-qcom: convert to dtschema soc: qcom: socinfo: Sort out 8974PRO names dt-bindings: soc: qcom,smp2p: convert to dtschema dt-bindings: qcom: geni-se: Update UART schema reference dt-bindings: qcom: geni-se: Update I2C schema reference dt-bindings: soc: qcom,rpmh-rsc: convert to dtschema bus: add driver for initializing the SSC bus on (some) qcom SoCs dt-bindings: bus: add device tree bindings for qcom,ssc-block-bus dt-bindings: qcom: qcom,geni-se: refer to dtschema for SPI dt-bindings: soc: qcom,smd: convert to dtschema firmware: qcom_scm: Add compatible for MSM8976 SoC dt-bindings: firmware: qcom-scm: Document msm8976 bindings soc: qcom: smem: validate fields of shared structures soc: qcom: smem: map only partitions used by local HOST ... Link: https://lore.kernel.org/r/20220509181839.316655-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
64dbc4dd7a |
ARM: pxa: move plat-pxa to drivers/soc/
There are two drivers in arch/arm/plat-pxa: mfp and ssp. Both of them should ideally not be needed at all, as there are proper subsystems to replace them. OTOH, they are self-contained and can simply be normal SoC drivers, so move them over there to eliminate one more of the plat-* directories. Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> (mach-pxa) Acked-by: Lubomir Rintel <lkundrak@v3.sk> (mach-mmp) Signed-off-by: Arnd Bergmann <arnd@arndb.de> |