When running machines with 64k page size and a 16k nodesize we started
seeing tree log corruption in production. This turned out to be because
we were not writing out dirty blocks sometimes, so this in fact affects
all metadata writes.
When writing out a subpage EB we scan the subpage bitmap for a dirty
range. If the range isn't dirty we do
bit_start++;
to move onto the next bit. The problem is the bitmap is based on the
number of sectors that an EB has. So in this case, we have a 64k
pagesize, 16k nodesize, but a 4k sectorsize. This means our bitmap is 4
bits for every node. With a 64k page size we end up with 4 nodes per
page.
To make this easier this is how everything looks
[0 16k 32k 48k ] logical address
[0 4 8 12 ] radix tree offset
[ 64k page ] folio
[ 16k eb ][ 16k eb ][ 16k eb ][ 16k eb ] extent buffers
[ | | | | | | | | | | | | | | | | ] bitmap
Now we use all of our addressing based on fs_info->sectorsize_bits, so
as you can see the above our 16k eb->start turns into radix entry 4.
When we find a dirty range for our eb, we correctly do bit_start +=
sectors_per_node, because if we start at bit 0, the next bit for the
next eb is 4, to correspond to eb->start 16k.
However if our range is clean, we will do bit_start++, which will now
put us offset from our radix tree entries.
In our case, assume that the first time we check the bitmap the block is
not dirty, we increment bit_start so now it == 1, and then we loop
around and check again. This time it is dirty, and we go to find that
start using the following equation
start = folio_start + bit_start * fs_info->sectorsize;
so in the case above, eb->start 0 is now dirty, and we calculate start
as
0 + 1 * fs_info->sectorsize = 4096
4096 >> 12 = 1
Now we're looking up the radix tree for 1, and we won't find an eb.
What's worse is now we're using bit_start == 1, so we do bit_start +=
sectors_per_node, which is now 5. If that eb is dirty we will run into
the same thing, we will look at an offset that is not populated in the
radix tree, and now we're skipping the writeout of dirty extent buffers.
The best fix for this is to not use sectorsize_bits to address nodes,
but that's a larger change. Since this is a fs corruption problem fix
it simply by always using sectors_per_node to increment the start bit.
Fixes: c4aec299fa ("btrfs: introduce submit_eb_subpage() to submit a subpage metadata page")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
There is a bug report that a syzbot reproducer can lead to the following
busy inode at unmount time:
BTRFS info (device loop1): last unmount of filesystem 1680000e-3c1e-4c46-84b6-56bd3909af50
VFS: Busy inodes after unmount of loop1 (btrfs)
------------[ cut here ]------------
kernel BUG at fs/super.c:650!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 48168 Comm: syz-executor Not tainted 6.15.0-rc2-00471-g119009db2674 #2 PREEMPT(full)
Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:generic_shutdown_super+0x2e9/0x390 fs/super.c:650
Call Trace:
<TASK>
kill_anon_super+0x3a/0x60 fs/super.c:1237
btrfs_kill_super+0x3b/0x50 fs/btrfs/super.c:2099
deactivate_locked_super+0xbe/0x1a0 fs/super.c:473
deactivate_super fs/super.c:506 [inline]
deactivate_super+0xe2/0x100 fs/super.c:502
cleanup_mnt+0x21f/0x440 fs/namespace.c:1435
task_work_run+0x14d/0x240 kernel/task_work.c:227
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop kernel/entry/common.c:114 [inline]
exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
syscall_exit_to_user_mode+0x269/0x290 kernel/entry/common.c:218
do_syscall_64+0xd4/0x250 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
[CAUSE]
When btrfs_alloc_path() failed, btrfs_iget() directly returned without
releasing the inode already allocated by btrfs_iget_locked().
This results the above busy inode and trigger the kernel BUG.
[FIX]
Fix it by calling iget_failed() if btrfs_alloc_path() failed.
If we hit error inside btrfs_read_locked_inode(), it will properly call
iget_failed(), so nothing to worry about.
Although the iget_failed() cleanup inside btrfs_read_locked_inode() is a
break of the normal error handling scheme, let's fix the obvious bug
and backport first, then rework the error handling later.
Reported-by: Penglei Jiang <superman.xpt@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/20250421102425.44431-1-superman.xpt@gmail.com/
Fixes: 7c855e16ab ("btrfs: remove conditional path allocation in btrfs_read_locked_inode()")
CC: stable@vger.kernel.org # 6.13+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Penglei Jiang <superman.xpt@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In run_delalloc_nocow(), when the found btrfs_key's offset > cur_offset,
it indicates a gap between the current processing region and
the next file extent. The original code would directly jump to
the "must_cow" label, which increments the slot and forces a fallback
to COW. This behavior might skip an extent item and result in an
overestimated COW fallback range.
This patch modifies the logic so that when a gap is detected:
- If no COW range is already being recorded (cow_start is unset),
cow_start is set to cur_offset.
- cur_offset is then advanced to the beginning of the next extent.
- Instead of jumping to "must_cow", control flows directly to
"next_slot" so that the same extent item can be reexamined properly.
The change ensures that we accurately account for the extent gap and
avoid accidentally extending the range that needs to fallback to COW.
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Dave Chen <davechen@synology.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Normally do_lock_mount(path, _) is locking a mountpoint pinned by
*path and at the time when matching unlock_mount() unlocks that
location it is still pinned by the same thing.
Unfortunately, for 'beneath' case it's no longer that simple -
the object being locked is not the one *path points to. It's the
mountpoint of path->mnt. The thing is, without sufficient locking
->mnt_parent may change under us and none of the locks are held
at that point. The rules are
* mount_lock stabilizes m->mnt_parent for any mount m.
* namespace_sem stabilizes m->mnt_parent, provided that
m is mounted.
* if either of the above holds and refcount of m is positive,
we are guaranteed the same for refcount of m->mnt_parent.
namespace_sem nests inside inode_lock(), so do_lock_mount() has
to take inode_lock() before grabbing namespace_sem. It does
recheck that path->mnt is still mounted in the same place after
getting namespace_sem, and it does take care to pin the dentry.
It is needed, since otherwise we might end up with racing mount --move
(or umount) happening while we were getting locks; in that case
dentry would no longer be a mountpoint and could've been evicted
on memory pressure along with its inode - not something you want
when grabbing lock on that inode.
However, pinning a dentry is not enough - the matching mount is
also pinned only by the fact that path->mnt is mounted on top it
and at that point we are not holding any locks whatsoever, so
the same kind of races could end up with all references to
that mount gone just as we are about to enter inode_lock().
If that happens, we are left with filesystem being shut down while
we are holding a dentry reference on it; results are not pretty.
What we need to do is grab both dentry and mount at the same time;
that makes inode_lock() safe *and* avoids the problem with fs getting
shut down under us. After taking namespace_sem we verify that
path->mnt is still mounted (which stabilizes its ->mnt_parent) and
check that it's still mounted at the same place. From that point
on to the matching namespace_unlock() we are guaranteed that
mount/dentry pair we'd grabbed are also pinned by being the mountpoint
of path->mnt, so we can quietly drop both the dentry reference (as
the current code does) and mnt one - it's OK to do under namespace_sem,
since we are not dropping the final refs.
That solves the problem on do_lock_mount() side; unlock_mount()
also has one, since dentry is guaranteed to stay pinned only until
the namespace_unlock(). That's easy to fix - just have inode_unlock()
done earlier, while it's still pinned by mp->m_dentry.
Fixes: 6ac3928156 "fs: allow to mount beneath top mount" # v6.5+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Fix off-by-one bug in the last page calculation for src and dst.
Reported-by: Nhat Pham <nphamcs@gmail.com>
Fixes: 2d3553ecb4 ("crypto: scomp - Remove support for some non-trivial SG lists")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When pausing rx (e.g. set up xdp, xsk pool, rx resize), we call
napi_disable() on the receive queue's napi. In delayed refill_work, it
also calls napi_disable() on the receive queue's napi. When
napi_disable() is called on an already disabled napi, it will sleep in
napi_disable_locked while still holding the netdev_lock. As a result,
later napi_enable gets stuck too as it cannot acquire the netdev_lock.
This leads to refill_work and the pause-then-resume tx are stuck
altogether.
This scenario can be reproducible by binding a XDP socket to virtio-net
interface without setting up the fill ring. As a result, try_fill_recv
will fail until the fill ring is set up and refill_work is scheduled.
This commit adds virtnet_rx_(pause/resume)_all helpers and fixes up the
virtnet_rx_resume to disable future and cancel all inflights delayed
refill_work before calling napi_disable() to pause the rx.
Fixes: 413f0271f3 ("net: protect NAPI enablement with netdev_lock()")
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20250417072806.18660-2-minhquangbui99@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A network restart test on a router led to an out-of-memory condition,
which was traced to a memory leak in the PHY LED trigger code.
The root cause is misuse of the devm API. The registration function
(phy_led_triggers_register) is called from phy_attach_direct, not
phy_probe, and the unregister function (phy_led_triggers_unregister)
is called from phy_detach, not phy_remove. This means the register and
unregister functions can be called multiple times for the same PHY
device, but devm-allocated memory is not freed until the driver is
unbound.
This also prevents kmemleak from detecting the leak, as the devm API
internally stores the allocated pointer.
Fix this by replacing devm_kzalloc/devm_kcalloc with standard
kzalloc/kcalloc, and add the corresponding kfree calls in the unregister
path.
Fixes: 3928ee6485 ("net: phy: leds: Add support for "link" trigger")
Fixes: 2e0bc452f4 ("net: phy: leds: add support for led triggers on phy link state change")
Signed-off-by: Hao Guan <hao.guan@siflower.com.cn>
Signed-off-by: Qingfang Deng <qingfang.deng@siflower.com.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250417032557.2929427-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As a result of an email from the fbnic author, I reviewed the phylink
documentation, and I have decided to clarify the wording in the
mac_link_(up|down)() kernel documentation as this was written from the
point of view of mvneta/mvpp2 and is misleading.
The documentation talks about forcing the link - indeed, this is what
is done in the mvneta and mvpp2 drivers but not at the physical layer
but the MACs idea, which has the effect of only allowing or stopping
packet flow at the MAC. This "link" needs to be controlled when using
a PHY or fixed link to start or stop packet flow at the MAC. However,
as the MAC and PCS are tightly integrated, if the MACs idea of the
link is forced down, it has the side effect that there is no way to
determine that the media link has come up - in this mode, the MAC must
be allowed to follow its built-in PCS so we can read the link state.
Frame the documentation in more generic terms, to avoid the thought
that the physical media link to the partner needs in some way to be
forced up or down with these calls; it does not. If that were to be
done, it would be a self-fulfilling prophecy - e.g. if the media link
goes down, then mac_link_down() will be called, and if the media link
is then placed into a forced down state, there is no possibility
that the media link will ever come up again - clearly this is a wrong
interpretation.
These methods are notifications to the MAC about what has happened to
the media link state - either from the PHY, or a PCS, or whatever
mechanism fixed-link is using. Thus, reword them to get away from
talking about changing link state to avoid confusion with media link
state.
This is not a change of any requirements of these methods.
Also, remove the obsolete references to EEE for these methods, we now
have the LPI functions for configuring the EEE parameters which
renders this redundant, and also makes the passing of "phy" to the
mac_link_up() function obsolete.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1u5Ah5-001GO1-7E@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When WoL is enabled, we update the software state in phylink to
indicate that the link is down, and disable the resolver from
bringing the link back up.
On resume, we attempt to bring the overall state into consistency
by calling the .mac_link_down() method, but this is wrong if the
link was already down, as phylink strictly orders the .mac_link_up()
and .mac_link_down() methods - and this would break that ordering.
Fixes: f97493657c ("net: phylink: add suspend/resume support")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1u55Qf-0016RN-PA@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[Why]
Recent findings show negligible power savings between IPS2 and RCG
during static desktop. In fact, DCN related clocks are higher
when IPS2 is enabled vs RCG.
RCG_IN_ACTIVE is also the default policy for another OS supported by
DC, and it has faster entry/exit.
[How]
Remove previous logic that checked for IPS2 support, and just default
to `DMUB_IPS_RCG_IN_ACTIVE_IPS2_IN_OFF`.
Fixes: 199888aa25 ("drm/amd/display: Update IPS default mode for DCN35/DCN351")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8f772d79ef)
Cc: stable@vger.kernel.org
[Why/How]
LTTPR are required to program DPCD 0000Eh to 0x4 (16ms) upon AUX read
reply to this register. Since old Sinks witih DPCD rev 1.1 and earlier
may not support this register, assume the mandatory value is programmed
by the LTTPR to avoid AUX timeout issues.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1594b60d74)
[Why]
The ACPI EDID in the BIOS of a Lenovo laptop includes 3 blocks, but
dm_helpers_probe_acpi_edid() has a start that is 'char'. The 3rd
block index starts after 255, so it can't be indexed properly.
This leads to problems with the display when the EDID is parsed.
[How]
Change the variable type to 'short' so that larger values can be indexed.
Cc: Renjith Pananchikkal <renjith.pananchikkal@amd.com>
Reported-by: Mark Pearson <mpearson@lenovo.com>
Suggested-by: David Ober <dober@lenovo.com>
Fixes: c6a837088b ("drm/amd/display: Fetch the EDID from _DDC if available for eDP")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a918bb4a90)
Cc: stable@vger.kernel.org
[Why]
Urgent latency adjustment was disabled on DCN35 due to issues with P0
enablement on some platforms. Without urgent latency, underflows occur
when doing certain high timing configurations. After testing, we found
that reenabling urgent latency didn't reintroduce p0 support on multiple
platforms.
[How]
renable urgent latency on DCN35 and setting it to 3000 Mhz.
This reverts commit 3412860cc4.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Nicholas Susanto <nsusanto@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cd74ce1f0c)
Pinning of VRAM is for peer devices that don't support dynamic attachment
and move notifiers. But it requires that all such peer devices are able to
access VRAM via PCIe P2P. Any device without P2P access requires migration
to GTT, which fails if the memory is already pinned for another peer
device.
Sharing between GPUs should not require pinning in VRAM. However, if
DMABUF_MOVE_NOTIFY is disabled in the kernel build, even DMABufs shared
between GPUs must be pinned, which can lead to failures and functional
regressions on systems where some peer GPUs are not P2P accessible.
Disable VRAM pinning if move notifiers are disabled in the kernel build
to fix regressions when sharing BOs between GPUs.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Tested-by: Hao (Claire) Zhou <hao.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 05185812ae)
When determining the domains for pinning DMABufs, filter allowed_domains
and fail with a warning if VRAM is forbidden and GTT is not an allowed
domain.
Fixes: f5e7fabd1f ("drm/amdgpu: allow pinning DMA-bufs into VRAM if all importers can do P2P")
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3940796a6e)
Pull btrfs fixes from David Sterba:
- subpage mode fixes:
- access correct object (folio) when looking up bit offset
- fix assertion condition for number of blocks per folio
- fix upper boundary of locking range in hole punch
- zoned fixes:
- fix potential deadlock caught by lockdep when zone reporting and
device freeze run in parallel
- fix zone write pointer mismatch and NULL pointer dereference when
metadata are converted from DUP to RAID1
- fix error handling when reloc inode creation fails
- in tree-checker, unify error code for header level check
- block layer: add helpers to read zone capacity
* tag 'for-6.15-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: skip reporting zone for new block group
block: introduce zone capacity helper
btrfs: tree-checker: adjust error code for header level check
btrfs: fix invalid inode pointer after failure to create reloc inode
btrfs: zoned: return EIO on RAID1 block group write pointer mismatch
btrfs: fix the ASSERT() inside GET_SUBPAGE_BITMAP()
btrfs: avoid page_lockend underflow in btrfs_punch_hole_lock_range()
btrfs: subpage: access correct object when reading bitmap start in subpage_calc_start_bit()
Pull integrity fix from Roberto Sassu:
"One performance fix to avoid unnecessarily taking the inode lock"
* tag 'integrity-6.15-rc3-fix' of https://github.com/linux-integrity/linux:
ima: process_measurement() needlessly takes inode_lock() on MAY_READ
Davidlohr Bueso <dave@stgolabs.net> says:
This is a respin of the series[0] to address the sleep in atomic
scenarios for noref migration with large folios, introduced in:
3c20917120 ("block/bdev: enable large folio support for large logical block sizes")
The main difference is that it removes the first patch and moves the fix
(reducing the i_private_lock critical region in the migration path) to
the final patch, which also introduces the new BH_Migrate flag. It also
simplifies the locking scheme in patch 1 to avoid folio trylocking in
the atomic lookup cases. So essentially blocking users will take the
folio lock and hence wait for migration, and otherwise nonblocking
callers will bail the lookup if a noref migration is on-going. Blocking
callers will also benefit from potential performance gains by reducing
contention on the spinlock for bdev mappings.
* patches from https://lore.kernel.org/20250418015921.132400-1-dave@stgolabs.net:
mm/migrate: fix sleep in atomic for large folios and buffer heads
fs/ext4: use sleeping version of sb_find_get_block()
fs/jbd2: use sleeping version of __find_get_block()
fs/ocfs2: use sleeping version of __find_get_block()
fs/buffer: use sleeping version of __find_get_block()
fs/buffer: introduce sleeping flavors for pagecache lookups
fs/buffer: split locking for pagecache lookups
Link: https://lore.kernel.org/20250418015921.132400-1-dave@stgolabs.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
Both the hfs and hfsplus filesystem have been orphaned since at least
2014, i.e., over 10 years. However, HFS/HFS+ driver needs to stay
for Debian Ports as otherwise we won't be able to boot PowerMacs
using GRUB because GRUB won't be usable anymore on PowerMacs with
HFS/HFS+ being removed from the kernel.
This patch proposes to add Viacheslav Dubeyko and
John Paul Adrian Glaubitz as maintainers of HFS/HFS+ driver.
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/20250417223507.1097186-1-slava@dubeyko.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
When the select of PRIME_MUMBERS was removed from it's KUnit test
Kconfig nothing was added to the KUnit configs, meaning that when run
via the KUnit runner the tests are neither built nor run. Add
PRIME_NUMBERS to all_tests.config so they are enabled when the KUnit
runner builds the kernel.
Fixes: 3f2925174f ("lib/prime_numbers: KUnit test should not select PRIME_NUMBERS")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250422-lib-fix-prime-numbers-kunit-v1-1-4278c1d4a4ae@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
When a reserved memory region described in the device tree is attached
to a device, it is expected that the device's limitations are correctly
included in that description.
However, if the device driver failed to implement DMA address masking
or addressing beyond the default 32 bits (on arm64), then bad things
could happen because the DMA address was truncated, such as playing
back audio with no actual audio coming out, or DMA overwriting random
blocks of kernel memory.
Check against the coherent DMA mask when the memory regions are attached
to the device. Give a warning when the memory region can not be covered
by the mask.
A warning instead of a hard error was chosen, because it is possible
that existing drivers could be working fine even if they forgot to
extend the coherent DMA mask.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20250421083930.374173-1-wenst@chromium.org
On IMA policy update, if a measure rule exists in the policy,
IMA_MEASURE is set for ima_policy_flags which makes the violation_check
variable always true. Coupled with a no-action on MAY_READ for a
FILE_CHECK call, we're always taking the inode_lock().
This becomes a performance problem for extremely heavy read-only workloads.
Therefore, prevent this only in the case there's no action to be taken.
Signed-off-by: Frederick Lawler <fred@cloudflare.com>
Acked-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Remove the duplicated section and while at it, turn spaces into tabs.
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Fixes: c7b67ddc3c ("xfs: document zoned rt specifics in admin-guide")
Signed-off-by: Carlos Maiolino <cem@kernel.org>
xfs_zoned_need_gc makes use of mult_frac() to calculate the threshold
for triggering the zoned garbage collector, but, turns out mult_frac()
doesn't properly work with 64-bit data types and this caused build
failures on some 32-bit architectures.
Fix this by essentially open coding mult_frac() in a 64-bit friendly
way.
Notice we don't need to bother with counters underflow here because
xfs_estimate_freecounter() will always return a positive value, as it
leverages percpu_counter_read_positive to read such counters.
Fixes: 845abeb1f0 ("xfs: add tunable threshold parameter for triggering zone GC")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504181233.F7D9Atra-lkp@intel.com/
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
On x86_64 with gcc version 13.3.0, I compile kernel with:
make defconfig
./scripts/kconfig/merge_config.sh .config <(
echo CONFIG_COMPILE_TEST=y
)
make KCFLAGS="-fno-inline-functions -fno-inline-small-functions -fno-inline-functions-called-once"
Then I get a linker error:
ld: vmlinux.o: in function `pxp_fw_dependencies_completed':
kintel_pxp.c:(.text+0x95728f): undefined reference to `intel_pxp_gsccs_is_ready_for_sessions'
This is caused by not having a intel_pxp_gsccs_is_ready_for_sessions()
header stub for CONFIG_DRM_I915_PXP=n. Add it.
Signed-off-by: Chen Linxuan <chenlinxuan@uniontech.com>
Fixes: 99afb7cc8c ("drm/i915/pxp: Add ARB session creation and cleanup")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250415090616.2649889-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit b484c1e225)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Saranya Gopal