[ Upstream commit 1357b2165d ]
[WHY]
ENGINE_ID_UNKNOWN = -1 and can not be used as an array index. Plus, it
also means it is uninitialized and does not need free audio.
[HOW]
Skip and return NULL.
This fixes 2 OVERRUN issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59d99deb33 ]
[WHAT]
msg_id is used as an array index and it cannot be a negative value, and
therefore cannot be equal to MOD_HDCP_MESSAGE_ID_INVALID (-1).
[HOW]
Check whether msg_id is valid before reading and setting.
This fixes 4 OVERRUN issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6683c690b ]
lima uses a shared interrupt, so the interrupt handlers must be prepared
to be called at any time. At driver removal time, the clocks are
disabled early and the interrupts stay registered until the very end of
the remove process due to the devm usage.
This is potentially a bug as the interrupts access device registers
which assumes clocks are enabled. A crash can be triggered by removing
the driver in a kernel with CONFIG_DEBUG_SHIRQ enabled.
This patch frees the interrupts at each lima device finishing callback
so that the handlers are already unregistered by the time we fully
disable clocks.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240401224329.1228468-2-nunes.erico@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 996c3412a0 upstream.
CI has been sporadically reporting the following issue triggered by
igt@i915_selftest@live@hangcheck on ADL-P and similar machines:
<6> [414.049203] i915: Running intel_hangcheck_live_selftests/igt_reset_evict_fence
...
<6> [414.068804] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled
<6> [414.068812] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled
<3> [414.070354] Unable to pin Y-tiled fence; err:-4
<3> [414.071282] i915_vma_revoke_fence:301 GEM_BUG_ON(!i915_active_is_idle(&fence->active))
...
<4>[ 609.603992] ------------[ cut here ]------------
<2>[ 609.603995] kernel BUG at drivers/gpu/drm/i915/gt/intel_ggtt_fencing.c:301!
<4>[ 609.604003] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
<4>[ 609.604006] CPU: 0 PID: 268 Comm: kworker/u64:3 Tainted: G U W 6.9.0-CI_DRM_14785-g1ba62f8cea9c+ #1
<4>[ 609.604008] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR4 RVP, BIOS RPLPFWI1.R00.4035.A00.2301200723 01/20/2023
<4>[ 609.604010] Workqueue: i915 __i915_gem_free_work [i915]
<4>[ 609.604149] RIP: 0010:i915_vma_revoke_fence+0x187/0x1f0 [i915]
...
<4>[ 609.604271] Call Trace:
<4>[ 609.604273] <TASK>
...
<4>[ 609.604716] __i915_vma_evict+0x2e9/0x550 [i915]
<4>[ 609.604852] __i915_vma_unbind+0x7c/0x160 [i915]
<4>[ 609.604977] force_unbind+0x24/0xa0 [i915]
<4>[ 609.605098] i915_vma_destroy+0x2f/0xa0 [i915]
<4>[ 609.605210] __i915_gem_object_pages_fini+0x51/0x2f0 [i915]
<4>[ 609.605330] __i915_gem_free_objects.isra.0+0x6a/0xc0 [i915]
<4>[ 609.605440] process_scheduled_works+0x351/0x690
...
In the past, there were similar failures reported by CI from other IGT
tests, observed on other platforms.
Before commit 63baf4f3d5 ("drm/i915/gt: Only wait for GPU activity
before unbinding a GGTT fence"), i915_vma_revoke_fence() was waiting for
idleness of vma->active via fence_update(). That commit introduced
vma->fence->active in order for the fence_update() to be able to wait
selectively on that one instead of vma->active since only idleness of
fence registers was needed. But then, another commit 0d86ee3509
("drm/i915/gt: Make fence revocation unequivocal") replaced the call to
fence_update() in i915_vma_revoke_fence() with only fence_write(), and
also added that GEM_BUG_ON(!i915_active_is_idle(&fence->active)) in front.
No justification was provided on why we might then expect idleness of
vma->fence->active without first waiting on it.
The issue can be potentially caused by a race among revocation of fence
registers on one side and sequential execution of signal callbacks invoked
on completion of a request that was using them on the other, still
processed in parallel to revocation of those fence registers. Fix it by
waiting for idleness of vma->fence->active in i915_vma_revoke_fence().
Fixes: 0d86ee3509 ("drm/i915/gt: Make fence revocation unequivocal")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/10021
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: stable@vger.kernel.org # v5.8+
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240603195446.297690-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 24bb052d3d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ae6a233092 ]
This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows [1] [2].
In this case, the memory allocated to store RADEONFB_CONN_LIMIT pointers
to "drm_connector" structures can be avoided. This is because this
memory area is never accessed.
Also, in the kzalloc function, it is preferred to use sizeof(*pointer)
instead of sizeof(type) due to the type of the variable can change and
one needs not change the former (unlike the latter).
At the same time take advantage to remove the "#if 0" block, the code
where the removed memory area was accessed, and the RADEONFB_CONN_LIMIT
constant due to now is never used.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/160 [2]
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70cb9188ff ]
The breadcrumbs use a GT wakeref for guarding the interrupt, but are
disarmed during release of the engine wakeref. This leaves a hole where
we may attach a breadcrumb just as the engine is parking (after it has
parked its breadcrumbs), execute the irq worker with some signalers still
attached, but never be woken again.
That issue manifests itself in CI with IGT runner timeouts while tests
are waiting indefinitely for release of all GT wakerefs.
<6> [209.151778] i915: Running live_engine_pm_selftests/live_engine_busy_stats
<7> [209.231628] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_5
<7> [209.231816] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4
<7> [209.231944] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3
<7> [209.232056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [209.232166] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [209.232270] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [209.232368] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<4> [299.356116] [IGT] Inactivity timeout exceeded. Killing the current test with SIGQUIT.
...
<6> [299.356526] sysrq: Show State
...
<6> [299.373964] task:i915_selftest state:D stack:11784 pid:5578 tgid:5578 ppid:873 flags:0x00004002
<6> [299.373967] Call Trace:
<6> [299.373968] <TASK>
<6> [299.373970] __schedule+0x3bb/0xda0
<6> [299.373974] schedule+0x41/0x110
<6> [299.373976] intel_wakeref_wait_for_idle+0x82/0x100 [i915]
<6> [299.374083] ? __pfx_var_wake_function+0x10/0x10
<6> [299.374087] live_engine_busy_stats+0x9b/0x500 [i915]
<6> [299.374173] __i915_subtests+0xbe/0x240 [i915]
<6> [299.374277] ? __pfx___intel_gt_live_setup+0x10/0x10 [i915]
<6> [299.374369] ? __pfx___intel_gt_live_teardown+0x10/0x10 [i915]
<6> [299.374456] intel_engine_live_selftests+0x1c/0x30 [i915]
<6> [299.374547] __run_selftests+0xbb/0x190 [i915]
<6> [299.374635] i915_live_selftests+0x4b/0x90 [i915]
<6> [299.374717] i915_pci_probe+0x10d/0x210 [i915]
At the end of the interrupt worker, if there are no more engines awake,
disarm the breadcrumb and go to sleep.
Fixes: 9d5612ca16 ("drm/i915/gt: Defer enabling the breadcrumb interrupt to after submission")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/10026
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: <stable@vger.kernel.org> # v5.12+
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240423165505.465734-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit fbad43ecca)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c877bed82e ]
One impact of commit 047a1b877e ("dma-buf & drm/amdgpu: remove
dma_resv workaround") is that it stores many, many more fences. Whereas
adding an exclusive fence used to remove the shared fence list, that
list is now preserved and the write fences included into the list. Not
just a single write fence, but now a write/read fence per context. That
causes us to have to track more fences than before (albeit half of those
are redundant), and we trigger more interrupts for multi-engine
workloads.
As part of reducing the impact from handling more signaling, we observe
we only need to kick the signal worker after adding a fence iff we have
good cause to believe that there is work to be done in processing the
fence i.e. we either need to enable the interrupt or the request is
already complete but we don't know if we saw the interrupt and so need
to check signaling.
References: 047a1b877e ("dma-buf & drm/amdgpu: remove dma_resv workaround")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Karolina Drobnik <karolina.drobnik@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d7b953c7a4ba747c8196a164e2f8c5aef468d048.1657289332.git.karolina.drobnik@intel.com
Stable-dep-of: 70cb9188ff ("drm/i915/gt: Disarm breadcrumbs if engines are already idle")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a421cc7a6a ]
There is a race condition in which a rendering job might take just long
enough to trigger the drm sched job timeout handler but also still
complete before the hard reset is done by the timeout handler.
This runs into race conditions not expected by the timeout handler.
In some very specific cases it currently may result in a refcount
imbalance on lima_pm_idle, with a stack dump such as:
[10136.669170] WARNING: CPU: 0 PID: 0 at drivers/gpu/drm/lima/lima_devfreq.c:205 lima_devfreq_record_idle+0xa0/0xb0
...
[10136.669459] pc : lima_devfreq_record_idle+0xa0/0xb0
...
[10136.669628] Call trace:
[10136.669634] lima_devfreq_record_idle+0xa0/0xb0
[10136.669646] lima_sched_pipe_task_done+0x5c/0xb0
[10136.669656] lima_gp_irq_handler+0xa8/0x120
[10136.669666] __handle_irq_event_percpu+0x48/0x160
[10136.669679] handle_irq_event+0x4c/0xc0
We can prevent that race condition entirely by masking the irqs at the
beginning of the timeout handler, at which point we give up on waiting
for that job entirely.
The irqs will be enabled again at the next hard reset which is already
done as a recovery by the timeout handler.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405152951.1531555-4-nunes.erico@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f30a3bea92 ]
[WHY]
PSP can access DCN registers during command submission and we need
to ensure that DCN is not in PG before doing so.
[HOW]
Add a callback to DM to lock and notify DC for idle optimization exit.
It can't be DC directly because of a potential race condition with the
link protection thread and the rest of DM operation.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 799d4b3924 upstream.
When reading EDID fails and driver reports no modes available, the DRM
core adds an artificial 1024x786 mode to the connector. Unfortunately
some variants of the Exynos HDMI (like the one in Exynos4 SoCs) are not
able to drive such mode, so report a safe 640x480 mode instead of nothing
in case of the EDID reading failure.
This fixes the following issue observed on Trats2 board since commit
13d5b04036 ("drm/exynos: do not return negative values from .get_modes()"):
[drm] Exynos DRM: using 11c00000.fimd device for DMA mapping operations
exynos-drm exynos-drm: bound 11c00000.fimd (ops fimd_component_ops)
exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops)
exynos-dsi 11c80000.dsi: [drm:samsung_dsim_host_attach] Attached s6e8aa0 device (lanes:4 bpp:24 mode-flags:0x10b)
exynos-drm exynos-drm: bound 11c80000.dsi (ops exynos_dsi_component_ops)
exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops)
[drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1
exynos-hdmi 12d00000.hdmi: [drm:hdmiphy_enable.part.0] *ERROR* PLL could not reach steady state
panel-samsung-s6e8aa0 11c80000.dsi.0: ID: 0xa2, 0x20, 0x8c
exynos-mixer 12c10000.mixer: timeout waiting for VSYNC
------------[ cut here ]------------
WARNING: CPU: 1 PID: 11 at drivers/gpu/drm/drm_atomic_helper.c:1682 drm_atomic_helper_wait_for_vblanks.part.0+0x2b0/0x2b8
[CRTC:70:crtc-1] vblank wait timed out
Modules linked in:
CPU: 1 PID: 11 Comm: kworker/u16:0 Not tainted 6.9.0-rc5-next-20240424 #14913
Hardware name: Samsung Exynos (Flattened Device Tree)
Workqueue: events_unbound deferred_probe_work_func
Call trace:
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x68/0x88
dump_stack_lvl from __warn+0x7c/0x1c4
__warn from warn_slowpath_fmt+0x11c/0x1a8
warn_slowpath_fmt from drm_atomic_helper_wait_for_vblanks.part.0+0x2b0/0x2b8
drm_atomic_helper_wait_for_vblanks.part.0 from drm_atomic_helper_commit_tail_rpm+0x7c/0x8c
drm_atomic_helper_commit_tail_rpm from commit_tail+0x9c/0x184
commit_tail from drm_atomic_helper_commit+0x168/0x190
drm_atomic_helper_commit from drm_atomic_commit+0xb4/0xe0
drm_atomic_commit from drm_client_modeset_commit_atomic+0x23c/0x27c
drm_client_modeset_commit_atomic from drm_client_modeset_commit_locked+0x60/0x1cc
drm_client_modeset_commit_locked from drm_client_modeset_commit+0x24/0x40
drm_client_modeset_commit from __drm_fb_helper_restore_fbdev_mode_unlocked+0x9c/0xc4
__drm_fb_helper_restore_fbdev_mode_unlocked from drm_fb_helper_set_par+0x2c/0x3c
drm_fb_helper_set_par from fbcon_init+0x3d8/0x550
fbcon_init from visual_init+0xc0/0x108
visual_init from do_bind_con_driver+0x1b8/0x3a4
do_bind_con_driver from do_take_over_console+0x140/0x1ec
do_take_over_console from do_fbcon_takeover+0x70/0xd0
do_fbcon_takeover from fbcon_fb_registered+0x19c/0x1ac
fbcon_fb_registered from register_framebuffer+0x190/0x21c
register_framebuffer from __drm_fb_helper_initial_config_and_unlock+0x350/0x574
__drm_fb_helper_initial_config_and_unlock from exynos_drm_fbdev_client_hotplug+0x6c/0xb0
exynos_drm_fbdev_client_hotplug from drm_client_register+0x58/0x94
drm_client_register from exynos_drm_bind+0x160/0x190
exynos_drm_bind from try_to_bring_up_aggregate_device+0x200/0x2d8
try_to_bring_up_aggregate_device from __component_add+0xb0/0x170
__component_add from mixer_probe+0x74/0xcc
mixer_probe from platform_probe+0x5c/0xb8
platform_probe from really_probe+0xe0/0x3d8
really_probe from __driver_probe_device+0x9c/0x1e4
__driver_probe_device from driver_probe_device+0x30/0xc0
driver_probe_device from __device_attach_driver+0xa8/0x120
__device_attach_driver from bus_for_each_drv+0x80/0xcc
bus_for_each_drv from __device_attach+0xac/0x1fc
__device_attach from bus_probe_device+0x8c/0x90
bus_probe_device from deferred_probe_work_func+0x98/0xe0
deferred_probe_work_func from process_one_work+0x240/0x6d0
process_one_work from worker_thread+0x1a0/0x3f4
worker_thread from kthread+0x104/0x138
kthread from ret_from_fork+0x14/0x28
Exception stack(0xf0895fb0 to 0xf0895ff8)
...
irq event stamp: 82357
hardirqs last enabled at (82363): [<c01a96e8>] vprintk_emit+0x308/0x33c
hardirqs last disabled at (82368): [<c01a969c>] vprintk_emit+0x2bc/0x33c
softirqs last enabled at (81614): [<c0101644>] __do_softirq+0x320/0x500
softirqs last disabled at (81609): [<c012dfe0>] __irq_exit_rcu+0x130/0x184
---[ end trace 0000000000000000 ]---
exynos-drm exynos-drm: [drm] *ERROR* flip_done timed out
exynos-drm exynos-drm: [drm] *ERROR* [CRTC:70:crtc-1] commit wait timed out
exynos-drm exynos-drm: [drm] *ERROR* flip_done timed out
exynos-drm exynos-drm: [drm] *ERROR* [CONNECTOR:74:HDMI-A-1] commit wait timed out
exynos-drm exynos-drm: [drm] *ERROR* flip_done timed out
exynos-drm exynos-drm: [drm] *ERROR* [PLANE:56:plane-5] commit wait timed out
exynos-mixer 12c10000.mixer: timeout waiting for VSYNC
Cc: stable@vger.kernel.org
Fixes: 13d5b04036 ("drm/exynos: do not return negative values from .get_modes()")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ce62600c4d ]
Device managed panel bridge wrappers are created by calling to
drm_panel_bridge_add_typed() and registering a release handler for
clean-up when the device gets unbound.
Since the memory for this bridge is also managed and linked to the panel
device, the release function should not try to free that memory.
Moreover, the call to devm_kfree() inside drm_panel_bridge_remove() will
fail in this case and emit a warning because the panel bridge resource
is no longer on the device resources list (it has been removed from
there before the call to release handlers).
Fixes: 67022227ff ("drm/bridge: Add a devm_ allocator for panel bridge.")
Signed-off-by: Adam Miotk <adam.miotk@arm.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610102739.139852-1-adam.miotk@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 892b41b16f ]
[Why] DSC debugfs, such as dp_dsc_clock_en_read,
use aconnector->dc_link to find pipe_ctx for display.
Displays connected to MST hub share the same dc_link.
DSC instance is from pipe_ctx. This causes incorrect
DSC instance for display connected to MST hub.
[How] Add aconnector->sink check to find pipe_ctx.
CC: stable@vger.kernel.org
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8e12e770e ]
pipe_ctx pointer cannot be NULL when getting the address of
an element of the pipe_ctx array. Moreover, the MAX_PIPES is
defined as 6, so pipe_ctx is not NULL after the loop either.
Detected using the static analysis tool - Svace.
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 892b41b16f ("drm/amd/display: Fix incorrect DSC instance for MST")
Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit 56b522f466.
A user reported that this commit breaks the integrated gpu of his
notebook, causing a black screen. He was able to bisect the problematic
commit and verified that by reverting it the notebook works again.
He also confirmed that kernel 6.8.1 also works on his device, so the
upstream commit itself seems to be ok.
An amdgpu developer (Alex Deucher) confirmed that this patch should
have never been ported to 5.15 in the first place, so revert this
commit from the 5.15 stable series.
Reported-by: Barry Kauler <bkauler@gmail.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240523173031.4212-1-W_Armin@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 30ea09a182 ]
The bridge always uses 24bpp internally. Therefore, for jeida-18
mapping we need to discard the lowest two bits for each channel and thus
starting with LV_[RGB]2. jeida-24 has the same mapping but uses four
lanes instead of three, with the forth pair transmitting the lowest two
bits of each channel. Thus, the mapping between jeida-18 and jeida-24
is actually the same, except that one channel is turned off (by
selecting the RGB666 format in VPCTRL).
While at it, remove the bogus comment about the hardware default because
the default is overwritten in any case.
Tested with a jeida-18 display (Evervision VGG644804).
Fixes: b26975593b ("display/drm/bridge: TC358775 DSI/LVDS driver")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240225062008.33191-5-tony@atomide.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yao Zi