5489f333ef
11717 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Chia-Yu Chang
|
b40671b5ee |
tcp: accecn: AccECN option failure handling
AccECN option may fail in various way, handle these:
- Attempt to negotiate the use of AccECN on the 1st retransmitted SYN
- From the 2nd retransmitted SYN, stop AccECN negotiation
- Remove option from SYN/ACK rexmits to handle blackholes
- If no option arrives in SYN/ACK, assume Option is not usable
- If an option arrives later, re-enabled
- If option is zeroed, disable AccECN option processing
This patch use existing padding bits in tcp_request_sock and
holes in tcp_sock without increasing the size.
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250916082434.100722-9-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
||
|
Ilpo Järvinen
|
b5e74132df |
tcp: accecn: AccECN option
The Accurate ECN allows echoing back the sum of bytes for each IP ECN field value in the received packets using AccECN option. This change implements AccECN option tx & rx side processing without option send control related features that are added by a later change. Based on specification: https://tools.ietf.org/id/draft-ietf-tcpm-accurate-ecn-28.txt (Some features of the spec will be added in the later changes rather than in this one). A full-length AccECN option is always attempted but if it does not fit, the minimum length is selected based on the counters that have changed since the last update. The AccECN option (with 24-bit fields) often ends in odd sizes so the option write code tries to take advantage of some nop used to pad the other TCP options. The delivered_ecn_bytes pairs with received_ecn_bytes similar to how delivered_ce pairs with received_ce. In contrast to ACE field, however, the option is not always available to update delivered_ecn_bytes. For ACK w/o AccECN option, the delivered bytes calculated based on the cumulative ACK+SACK information are assigned to one of the counters using an estimation heuristic to select the most likely ECN byte counter. Any estimation error is corrected when the next AccECN option arrives. It may occur that the heuristic gets too confused when there are enough different byte counter deltas between ACKs with the AccECN option in which case the heuristic just gives up on updating the counters for a while. tcp_ecn_option sysctl can be used to select option sending mode for AccECN: TCP_ECN_OPTION_DISABLED, TCP_ECN_OPTION_MINIMUM, and TCP_ECN_OPTION_FULL. This patch increases the size of tcp_info struct, as there is no existing holes for new u32 variables. Below are the pahole outcomes before and after this patch: [BEFORE THIS PATCH] struct tcp_info { [...] __u32 tcpi_total_rto_time; /* 244 4 */ /* size: 248, cachelines: 4, members: 61 */ } [AFTER THIS PATCH] struct tcp_info { [...] __u32 tcpi_total_rto_time; /* 244 4 */ __u32 tcpi_received_ce; /* 248 4 */ __u32 tcpi_delivered_e1_bytes; /* 252 4 */ __u32 tcpi_delivered_e0_bytes; /* 256 4 */ __u32 tcpi_delivered_ce_bytes; /* 260 4 */ __u32 tcpi_received_e1_bytes; /* 264 4 */ __u32 tcpi_received_e0_bytes; /* 268 4 */ __u32 tcpi_received_ce_bytes; /* 272 4 */ /* size: 280, cachelines: 5, members: 68 */ } This patch uses the existing 1-byte holes in the tcp_sock_write_txrx group for new u8 members, but adds a 4-byte hole in tcp_sock_write_rx group after the new u32 delivered_ecn_bytes[3] member. Therefore, the group size of tcp_sock_write_rx is increased from 96 to 112. Below are the pahole outcomes before and after this patch: [BEFORE THIS PATCH] struct tcp_sock { [...] u8 received_ce_pending:4; /* 2522: 0 1 */ u8 unused2:4; /* 2522: 4 1 */ /* XXX 1 byte hole, try to pack */ [...] u32 rcv_rtt_last_tsecr; /* 2668 4 */ [...] __cacheline_group_end__tcp_sock_write_rx[0]; /* 2728 0 */ [...] /* size: 3200, cachelines: 50, members: 167 */ } [AFTER THIS PATCH] struct tcp_sock { [...] u8 received_ce_pending:4;/* 2522: 0 1 */ u8 unused2:4; /* 2522: 4 1 */ u8 accecn_minlen:2; /* 2523: 0 1 */ u8 est_ecnfield:2; /* 2523: 2 1 */ u8 unused3:4; /* 2523: 4 1 */ [...] u32 rcv_rtt_last_tsecr; /* 2668 4 */ u32 delivered_ecn_bytes[3];/* 2672 12 */ /* XXX 4 bytes hole, try to pack */ [...] __cacheline_group_end__tcp_sock_write_rx[0]; /* 2744 0 */ [...] /* size: 3200, cachelines: 50, members: 171 */ } Signed-off-by: Ilpo Järvinen <ij@kernel.org> Signed-off-by: Neal Cardwell <ncardwell@google.com> Co-developed-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com> Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250916082434.100722-7-chia-yu.chang@nokia-bell-labs.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Jakub Kicinski
|
bd569dd935 |
netfilter pull request nf-next-25-09-11
-----BEGIN PGP SIGNATURE----- iQJBBAABCAArFiEEgKkgxbID4Gn1hq6fcJGo2a1f9gAFAmjC0WsNHGZ3QHN0cmxl bi5kZQAKCRBwkajZrV/2AOC2D/982GOJGI79ArhsM9FzEiJDp2QLxMnz7cw0t1Vg pU469JYA/He6VHMbhiqCBopSAskl36kMMGLbflPe+Zc1DNjconFD8wrDRBlUI+EI lR1dERMUyafuRMuuvKaE7A0ePyR7AD1JFf1znpo6BrRDMX8mbumcIA/L7/T1Rz2F 0b9Phbj77EdKruRgD4eXCuDJibOr5j6FymNvDGR/bm3SovOsOM4gi2dQ3Y3B85ZK aUDDrss5acypBfu36w+340eMtr1GJKoaCKoK9ScnO58peCSo9C0b+o6xwUBPnHdw sQOhl6fErOfN+agGir357jLsBUb1H7Tg9decwv9qHp3jESei3kgAyoBF4SqH+48S Bz1E2M0A0Hxve3/I/Pp1Hz6X5r+V+gDtx71z4+acoZg5YjDMAKFJAfgiK6sFKqZP 73QsvnU2omu2C5r8TAbryv01C5xmkbe3YyU8j4taZOBGk4YkPd5WjJELbTcVM4If dxDE6vQ9+GrrlBl9aidrMNxIhJuS/qjVIb0tv7oZPVql995AgPJG3F3gSO78OPBj V4dN9p/wPN9lRl5tj/odWiOfsdQiY7fEkqdXlO79sACQCzXC5O6zAwcnK37s80mQ QFSt3oiPFcacJJyHHYeYISy13HXlxwUgdxWC6T/sXMU5Jpic+3bWFxC2YgRcIsqZ ZE1JbA== =FXmW -----END PGP SIGNATURE----- Merge tag 'nf-next-25-09-11' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next Florian Westphal says: ==================== netfilter: updates for net-next 1) Don't respond to ICMP_UNREACH errors with another ICMP_UNREACH error. 2) Support fetching the current bridge ethernet address. This allows a more flexible approach to packet redirection on bridges without need to use hardcoded addresses. From Fernando Fernandez Mancera. 3) Zap a few no-longer needed conditionals from ipvs packet path and convert to READ/WRITE_ONCE to avoid KCSAN warnings. From Zhang Tengfei. 4) Remove a no-longer-used macro argument in ipset, from Zhen Ni. * tag 'nf-next-25-09-11' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nf_reject: don't reply to icmp error messages ipvs: Use READ_ONCE/WRITE_ONCE for ipvs->enable netfilter: nft_meta_bridge: introduce NFT_META_BRI_IIFHWADDR support netfilter: ipset: Remove unused htable_bits in macro ahash_region selftest:net: fixed spelling mistakes ==================== Link: https://patch.msgid.link/20250911143819.14753-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Petr Machata
|
21446c06b4 |
net: bridge: Introduce UAPI for BR_BOOLOPT_FDB_LOCAL_VLAN_0
The previous patches introduced a new option, BR_BOOLOPT_FDB_LOCAL_VLAN_0. When enabled, it has local FDB entries installed only on VLAN 0, instead of duplicating them across all VLANs. In this patch, add the corresponding UAPI toggle, and the code for turning the feature on and off. Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/ea99bfb10f687fa58091e6e1c2f8acc33f47ca45.1757004393.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
d103f26a5c |
Plenty of things going on, notably:
- iwlwifi: major cleanups/rework - brcmfmac: gets AP isolation support - mac80211: gets more S1G support -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEpeA8sTs3M8SN2hR410qiO8sPaAAFAmjCn20ACgkQ10qiO8sP aADlog//eLH6dmMJSF5d3HCCXzpABholMM7SgFmeL7zz2JVhMe+TD9sdM972A9/d aSTPhFvj3SESiayohbziKD2Fk2EWLYh35MVxP1VQG/pBMdXGryReWxXuMc+/iep8 wZJjvR7b5dwXc7xWi4BDYxRj4Z+3IMFulmwXMJl9pfBG8l/M2vRd1ihvpLyXwbZ1 k67rcmFltjvIh4DpGdxypO0onuTIgLycGF84YhyFrjeOpB75tM3knzCQMjnHZYo5 YL295cTPfpLY+7iyMhrFv5ootWm5eLfGX+jXA5EmEojOwinZbiN6AB4xDeMWC3fz rxk5ESo/wGEbJpLiV+CVkkptHYubGk7pA+EPSMQg94+HV4WL+GekZ9/5bRKLZ/Xv BXNkIL71KxhVd9DiDG5WomgnO2hDpk0zxpMADgZNEPkdgDRcl1Kh1oDw7S/4bp58 V/Ea349wRInesxK10BdJwtsJ0khDg0gaN6f+OG8L7dRw4mSl9akk2e0KVhHoOxYT rBbK4QKt77308TjlYqzJ+SUFhrb6PhPNgRMFx2zjSgH1eaHONVEM2zYOscQGNgqR Rfz8d6LUXx+aR87aOT31vUWqjl1KgwqbICiI6KWaQpcKTVK61WVFUiksddK6XyB7 drwoPFekBEjVXOVYaQtyPG3qEGEOVCEjooHXFPQJ+SJeR1sMHCc= =Nlkd -----END PGP SIGNATURE----- Merge tag 'wireless-next-2025-09-11' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== Plenty of things going on, notably: - iwlwifi: major cleanups/rework - brcmfmac: gets AP isolation support - mac80211: gets more S1G support * tag 'wireless-next-2025-09-11' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (94 commits) wifi: mwifiex: fix endianness handling in mwifiex_send_rgpower_table wifi: cfg80211: Remove the redundant wiphy_dev wifi: mac80211: fix incorrect comment wifi: cfg80211: update the time stamps in hidden ssid wifi: mac80211: Fix HE capabilities element check wifi: mac80211: add tx_handlers_drop statistics to ethtool wifi: mac80211: fix reporting of all valid links in sta_set_sinfo() wifi: iwlwifi: mld: CHANNEL_SURVEY_NOTIF is always supported wifi: iwlwifi: mld: remove support of iwl_esr_mode_notif version 1 wifi: iwlwifi: mld: remove support from of sta cmd version 1 wifi: iwlwifi: mld: remove support of roc cmd version 5 wifi: iwlwifi: mld: remove support of mac cmd ver 2 wifi: iwlwifi: mld: don't consider phy cmd version 5 wifi: iwlwifi: implement wowlan status notification API update wifi: iwlwifi: fw: Add ASUS to PPAG and TAS list wifi: iwlwifi: add kunit tests for nvm parse wifi: iwlwifi: api: add a flag to iwl_link_ctx_modify_flags wifi: iwlwifi: pcie: move ltr_enabled to the specific transport wifi: iwlwifi: pcie: move pm_support to the specific transport wifi: iwlwifi: rename iwl_finish_nic_init ... ==================== Link: https://patch.msgid.link/20250911100854.20445-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Fernando Fernandez Mancera
|
cbd2257dc9 |
netfilter: nft_meta_bridge: introduce NFT_META_BRI_IIFHWADDR support
Expose the input bridge interface ethernet address so it can be used to
redirect the packet to the receiving physical device for processing.
Tested with nft command line tool.
table bridge nat {
chain PREROUTING {
type filter hook prerouting priority 0; policy accept;
ether daddr de:ad:00:00:be:ef meta pkttype set host ether daddr set meta ibrhwdr accept
}
}
Joint work with Pablo Neira.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
||
|
Hangbin Liu
|
6b6dc81ee7 |
bonding: add support for per-port LACP actor priority
Introduce a new netlink attribute 'actor_port_prio' to allow setting the LACP actor port priority on a per-slave basis. This extends the existing bonding infrastructure to support more granular control over LACP negotiations. The priority value is embedded in LACPDU packets and will be used by subsequent patches to influence aggregator selection policies. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20250902064501.360822-2-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Carolina Jubran
|
faf23f54d3 |
ptp: Add ioctl commands to expose raw cycle counter values
Introduce two new ioctl commands, PTP_SYS_OFFSET_PRECISE_CYCLES and PTP_SYS_OFFSET_EXTENDED_CYCLES, to allow user space to access the raw free-running cycle counter from PTP devices. These ioctls are variants of the existing PRECISE and EXTENDED offset queries, but instead of returning device time in realtime, they return the raw cycle counter value. Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://patch.msgid.link/1755008228-88881-2-git-send-email-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Jakub Kicinski
|
5ef04a7b06 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.17-rc5).
No conflicts.
Adjacent changes:
include/net/sock.h
c51613fa276f ("net: add sk->sk_drop_counters")
5d6b58c932ec ("net: lockless sock_i_ino()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Arend van Spriel
|
4f652a390d |
wifi: nl80211: strict checking attributes for NL80211_CMD_SET_BSS
Assure user-space only modifies attributes for NL80211_CMD_SET_BSS that are supported by the driver. This stricter checking is only done when user-space commits to it by including NL80211_ATTR_BSS_PARAM. Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://patch.msgid.link/20250817190435.1495094-4-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Arend van Spriel
|
2418553491 |
wifi: nl80211: allow drivers to support subset of NL80211_CMD_SET_BSS
The so-called fullmac devices rely on firmware functionality and/or API to change BSS parameters. Today there are limited drivers supporting the nl80211 primitive, but they only handle a subset of the bss parameters passed if any. The mac80211 driver does handle all parameters and stores their configured values. Some of the BSS parameters were already conditional by wiphy->features. For these the wiphy->bss_param_support and wiphy->features fields are silently aligned in wiphy_register(). Maybe better to issue a warning instead when they are misaligned. Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://patch.msgid.link/20250817190435.1495094-2-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Muna Sinada
|
d0bf06158c |
wifi: nl80211: Add EHT fixed Tx rate support
Add new attributes to support EHT MCS/NSS Tx rates and EHT GI/LTF. Parse EHT fixed MCS/NSS Tx rates and EHT GI/LTF values passed by the userspace, validate and add as part of cfg80211_bitrate_mask. MCS mask is constructed by new function, eht_build_mcs_mask(). Max NSS supported for MCS rates of 7, 9, 11 and 13 is utilized to set MCS bitmask for each NSS. MCS rates 14, and 15 if supported, are set only for NSS = 0. Co-developed-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com> Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com> Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com> Link: https://patch.msgid.link/20250815213011.2704803-1-muna.sinada@oss.qualcomm.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Lachlan Hodges
|
ee63609454 |
wifi: mac80211: support block bitmap S1G TIM encoding
An S1G TIM PVB is encoded differently compared to a non-s1g TIM PVB. As the AP dictates which encoding mode it uses, here we only implement block bitmap encoding. This is the default encoding mode used by all current vendor implementations. Additionally, S1G has a maximum AID count of 8192, however we are limiting the current implementation to 1600. This has no resemblence to the standard and is purely an implementation detail. The reason for this is due to the TIM elements maximum length of 255. This allows for, at most, 25 encoded blocks for a PVB encoded with block bitmap. Support for the maximum of 8192 AIDs will require an implementation of page slicing to be added to mac80211. As a result, we perform extra validation on both the STA and AP side when receiving an AID as an S1G interface. Add support for block bitmap encoding for an S1G AP and limit the maximum AID count to 1600 for the current mac80211 implementations. Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com> Link: https://patch.msgid.link/20250725132221.258217-2-lachlan.hodges@morsemicro.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Phil Sutter
|
4039ce7ef4 |
netfilter: nf_tables: Introduce NFTA_DEVICE_PREFIX
This new attribute is supposed to be used instead of NFTA_DEVICE_NAME
for simple wildcard interface specs. It holds a NUL-terminated string
representing an interface name prefix to match on.
While kernel code to distinguish full names from prefixes in
NFTA_DEVICE_NAME is simpler than this solution, reusing the existing
attribute with different semantics leads to confusion between different
versions of kernel and user space though:
* With old kernels, wildcards submitted by user space are accepted yet
silently treated as regular names.
* With old user space, wildcards submitted by kernel may cause crashes
since libnftnl expects NUL-termination when there is none.
Using a distinct attribute type sanitizes these situations as the
receiving part detects and rejects the unexpected attribute nested in
*_HOOK_DEVS attributes.
Fixes: 6d07a289504a ("netfilter: nf_tables: Support wildcard netdev hook specs")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
||
|
Jakub Kicinski
|
d23ad54de7 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.17-rc4).
No conflicts.
Adjacent changes:
drivers/net/ethernet/intel/idpf/idpf_txrx.c
02614eee26fb ("idpf: do not linearize big TSO packets")
6c4e68480238 ("idpf: remove obsolete stashing code")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Jakub Kicinski
|
c2a756891b |
uapi: wrap compiler_types.h in an ifdef instead of the implicit strip
The uAPI stddef header includes compiler_types.h, a kernel-only header, to make sure that kernel definitions of annotations like __counted_by() take precedence. There is a hack in scripts/headers_install.sh which strips includes of compiler.h and compiler_types.h when installing uAPI headers. While explicit handling makes sense for compiler.h, which is included all over the uAPI, compiler_types.h is only included by stddef.h (within the uAPI, obviously it's included in kernel code a lot). Remove the stripping from scripts/headers_install.sh and wrap the include of compiler_types.h in #ifdef __KERNEL__ instead. This should be equivalent functionally, but is easier to understand to a casual reader of the code. It also makes it easier to work with kernel headers directly from under tools/ Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250825201828.2370083-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Shahar Shitrit
|
da0e219764 |
devlink: Make health reporter burst period configurable
Enable configuration of the burst period — a time window starting
from the first error recovery, during which the reporter allows
recovery attempts for each reported error.
This feature is helpful when a single underlying issue causes multiple
errors, as it delays the start of the grace period to allow sufficient
time for recovering all related errors. For example, if multiple TX
queues time out simultaneously, a sufficient burst period could allow
all affected TX queues to be recovered within that window. Without this
period, only the first TX queue that reports a timeout will undergo
recovery, while the remaining TX queues will be blocked once the grace
period begins.
Configuration example:
$ devlink health set pci/0000:00:09.0 reporter tx burst_period 500
Configuration example with ynl:
./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/devlink.yaml \
--do health-reporter-set --json '{
"bus-name": "auxiliary",
"dev-name": "mlx5_core.eth.0",
"port-index": 65535,
"health-reporter-name": "tx",
"health-reporter-burst-period": 500
}'
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250824084354.533182-5-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Namhyung Kim
|
24fc631539 |
vhost: Fix ioctl # for VHOST_[GS]ET_FORK_FROM_OWNER
The VHOST_[GS]ET_FEATURES_ARRAY ioctl already took 0x83 and it would
result in a build error when the vhost uapi header is used for perf tool
build like below.
In file included from trace/beauty/ioctl.c:93:
tools/perf/trace/beauty/generated/ioctl/vhost_virtio_ioctl_array.c: In function ‘ioctl__scnprintf_vhost_virtio_cmd’:
tools/perf/trace/beauty/generated/ioctl/vhost_virtio_ioctl_array.c:36:18: error: initialized field overwritten [-Werror=override-init]
36 | [0x83] = "SET_FORK_FROM_OWNER",
| ^~~~~~~~~~~~~~~~~~~~~
tools/perf/trace/beauty/generated/ioctl/vhost_virtio_ioctl_array.c:36:18: note: (near initialization for ‘vhost_virtio_ioctl_cmds[131]’)
Fixes: 7d9896e9f6d02d8a ("vhost: Reintroduce kthread API and add mode selection")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Message-Id: <20250819063958.833770-1-namhyung@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
||
|
Linus Torvalds
|
a2e94e8079 |
block-6.17-20250822
-----BEGIN PGP SIGNATURE-----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=mbqK
-----END PGP SIGNATURE-----
Merge tag 'block-6.17-20250822' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"A set of fixes for block that should go into this tree. A bit larger
than what I usually have at this point in time, a lot of that is the
continued fixing of the lockdep annotation for queue freezing that we
recently added, which has highlighted a number of little issues here
and there. This contains:
- MD pull request via Yu:
- Add a legacy_async_del_gendisk mode, to prevent a user tools
regression. New user tools releases will not use such a mode,
the old release with a new kernel now will have warning about
deprecated behavior, and we prepare to remove this legacy mode
after about a year later
- The rename in kernel causing user tools build failure, revert
the rename in mdp_superblock_s
- Fix a regression that interrupted resync can be shown as
recover from mdstat or sysfs
- Improve file size detection for loop, particularly for networked
file systems, by using getattr to get the size rather than the
cached inode size.
- Hotplug CPU lock vs queue freeze fix
- Lockdep fix while updating the number of hardware queues
- Fix stacking for PI devices
- Silence bio_check_eod() for the known case of device removal where
the size is truncated to 0 sectors"
* tag 'block-6.17-20250822' of git://git.kernel.dk/linux:
block: avoid cpu_hotplug_lock depedency on freeze_lock
block: decrement block_rq_qos static key in rq_qos_del()
block: skip q->rq_qos check in rq_qos_done_bio()
blk-mq: fix lockdep warning in __blk_mq_update_nr_hw_queues
block: tone down bio_check_eod
loop: use vfs_getattr_nosec for accurate file size
loop: Consolidate size calculation logic into lo_calculate_size()
block: remove newlines from the warnings in blk_validate_integrity_limits
block: handle pi_tuple_size in queue_limits_stack_integrity
selftests: ublk: Use ARRAY_SIZE() macro to improve code
md: fix sync_action incorrect display during resync
md: add helper rdev_needs_recovery()
md: keep recovery_cp in mdp_superblock_s
md: add legacy_async_del_gendisk mode
|
||
|
Chen Yu
|
8151320c74 |
ACPI: pfr_update: Fix the driver update version check
The security-version-number check should be used rather
than the runtime version check for driver updates.
Otherwise, the firmware update would fail when the update binary had
a lower runtime version number than the current one.
Fixes: 0db89fa243e5 ("ACPI: Introduce Platform Firmware Runtime Update device driver")
Cc: 5.17+ <stable@vger.kernel.org> # 5.17+
Reported-by: "Govindarajulu, Hariganesh" <hariganesh.govindarajulu@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Link: https://patch.msgid.link/20250722143233.3970607-1-yu.c.chen@intel.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
||
|
Xiao Ni
|
c27973211f |
md: keep recovery_cp in mdp_superblock_s
commit 907a99c314a5 ("md: rename recovery_cp to resync_offset") replaces
recovery_cp with resync_offset in mdp_superblock_s which is in md_p.h.
md_p.h is used in userspace too. So mdadm building fails because of this.
This patch revert this change.
Fixes: 907a99c314a5 ("md: rename recovery_cp to resync_offset")
Signed-off-by: Xiao Ni <xni@redhat.com>
Link: https://lore.kernel.org/linux-raid/20250815040028.18085-1-xni@redhat.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
|
||
|
Jakub Kicinski
|
f24775c325 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.17-rc2).
No conflicts.
Adjacent changes:
drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
d7a276a5768f ("net: stmmac: rk: convert to suspend()/resume() methods")
de1e963ad064 ("net: stmmac: rk: put the PHY clock on remove")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Jakub Kicinski
|
f22cc6f766 |
net: ethtool: support including Flow Label in the flow hash for RSS
Some modern NICs support including the IPv6 Flow Label in the flow hash for RSS queue selection. This is outside the old "Microsoft spec", but was included in the OCP NIC spec: [ ] RSS include flow label in the hash (configurable) https://www.opencompute.org/w/index.php?title=Core_Offloads#Receive_Side_Scaling RSS Flow Label hashing allows TCP Protective Load Balancing (PLB) to recover from receiver congestion / overload. Rx CPU/queue hotspots are relatively common for data ingest workloads, and so far we had to try to detect the condition at the RPC layer and reopen the connection. PLB lets us change the Flow Label and therefore Rx CPU on RTO, with minimal packet reordering. PLB reaction times are much faster, and can happen at any point in the connection, not just at RPC boundaries. Due to the nature of host processing (relatively long queues, other kernel subsystems masking IRQs for 100s of msecs) the risk of reordering within the host is higher than in the network. But for applications which need it - it is far preferable to potentially persistent overload of subset of queues. It is expected that the hash communicated to the host may change if the Flow Label changes. This may be surprising to some host software, but I don't expect the devices can compute two Toeplitz hashes, one with the Flow Label for queue selection and one without for the rx hash communicated to the host. Besides, changing the hash may potentially help to change the path thru host queues. User can disable NETIF_F_RXHASH if they require a stable flow hash. The name RXH_IP6_FL was chosen based on what we call Flow Label variables in IPv6 processing (fl). I prefer fl_lbl but that appears to be an fbnic-only spelling. We could spell out RXH_IP6_FLOW_LABEL but existing RXH_ defines are a lot more terse. Willem notes [1] that Flow Label is defined as identifying the flow and therefore including both the flow label _and_ the L4 header fields is not generally necessary. But it should not hurt so it's not explicitly prevented if the driver supports hashing on both at the same time. Link: https://lore.kernel.org/68483433b45e2_3cd66f29440@willemb.c.googlers.com.notmuch [1] Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Joe Damato <joe@dama.to> Link: https://patch.msgid.link/20250811234212.580748-2-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Linus Torvalds
|
561c80369d |
TTY revert fix for 6.16-rc1
Here is a single revert of one of the previous patches that went in the last tty/serial merge that is breaking userspace on some platforms (specifically powerpc, probably a few others.) It accidentially changed the ioctl values of some tty ioctls, which breaks xorg. The revert has been in linux-next all this week with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaJdfkg8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymq2QCgxaxTJGciGevsEi3rcXw+TkS0dq4AniOTgmCb cLQx6kIGVCucA1dOxWr8 =Vzw4 -----END PGP SIGNATURE----- Merge tag 'tty-6.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull TTY fix from Greg KH: "Here is a single revert of one of the previous patches that went in the last tty/serial merge that is breaking userspace on some platforms (specifically powerpc, probably a few others.) It accidentially changed the ioctl values of some tty ioctls, which breaks xorg. The revert has been in linux-next all this week with no reported issues" * tag 'tty-6.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "tty: vt: use _IO() to define ioctl numbers" |
||
|
Linus Torvalds
|
2988dfed8a |
block-6.17-20250808
-----BEGIN PGP SIGNATURE-----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=EQ7g
-----END PGP SIGNATURE-----
Merge tag 'block-6.17-20250808' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
- MD pull request via Yu:
- mddev null-ptr-dereference fix, by Erkun
- md-cluster fail to remove the faulty disk regression fix, by
Heming
- minor cleanup, by Li Nan and Jinchao
- mdadm lifetime regression fix reported by syzkaller, by Yu Kuai
- MD pull request via Christoph
- add support for getting the FDP featuee in fabrics passthru path
(Nitesh Shetty)
- add capability to connect to an administrative controller
(Kamaljit Singh)
- fix a leak on sgl setup error (Keith Busch)
- initialize discovery subsys after debugfs is initialized
(Mohamed Khalfella)
- fix various comment typos (Bjorn Helgaas)
- remove unneeded semicolons (Jiapeng Chong)
- nvmet debugfs ordering issue fix
- Fix UAF in the tag_set in zloop
- Ensure sbitmap shallow depth covers entire set
- Reduce lock roundtrips in io context lookup
- Move scheduler tags alloc/free out of elevator and freeze lock, to
fix some lockdep found issues
- Improve robustness of queue limits checking
- Fix a regression with IO priorities, if no io context exists
* tag 'block-6.17-20250808' of git://git.kernel.dk/linux: (26 commits)
lib/sbitmap: make sbitmap_get_shallow() internal
lib/sbitmap: convert shallow_depth from one word to the whole sbitmap
nvmet: exit debugfs after discovery subsystem exits
block, bfq: Reorder struct bfq_iocq_bfqq_data
md: make rdev_addable usable for rcu mode
md/raid1: remove struct pool_info and related code
md/raid1: change r1conf->r1bio_pool to a pointer type
block: ensure discard_granularity is zero when discard is not supported
zloop: fix KASAN use-after-free of tag set
block: Fix default IO priority if there is no IO context
nvme: fix various comment typos
nvme-auth: remove unneeded semicolon
nvme-pci: fix leak on sgl setup error
nvmet: initialize discovery subsys after debugfs is initialized
nvme: add capability to connect to an administrative controller
nvmet: add support for FDP in fabrics passthru path
md: rename recovery_cp to resync_offset
md/md-cluster: handle REMOVE message earlier
md: fix create on open mddev lifetime regression
block: fix potential deadlock while running nr_hw_queue update
...
|
||
|
Linus Torvalds
|
24bbfb8920 |
io_uring-6.17-20250808
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmiWLk0QHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpjl3D/0eZiD3qTmdIcf7GNAoaR/aD4zgICEhwEUf 2bzVFJ7RAZeplPhT2QLAf4CRoDui6iYLXaJONNsZc8r355FLKsZcMVmU8FFBnM6Q chn0wAmv92Jk/fMQWhw1mL4c19jCibTOefzHzm7s2AMhPyhAzlvcMG/Mr9uiNt38 uBXOo9DOkX1fYlUcmYH9v8KDTQBE6UMXeEcDiLvxGUs+JW1hbBAPmh9K3/KJ5qbs wShNL0UOgq5V/GUZqMr6xRqkW++B/6/v6Y/O+wbJ8lgLV97YQi3xemHu3BCx8Kv4 lbvyctUKCTCgQPgnhluu3KuldDkLn3FA7sQ2g1b1FZWkEpqLhgJIRjgGR53GmeHX c58VcRc+MNXf+Lzuy7ZbrYdI6Gbt52Ns+g4S05TNo6ZZW0NGyaZK5aeb7qQyhmnY rCELejwPQKTZv8YfRgV+Kt14x2Z7OdGa49u31JeYUE/IYu9M2FC+XE3//D7Bdz+3 QhU4ZzOW/LRA7xXq/uRb6XK0qRFt34nA+A7jFeKaZbrh6XvXD8VN5MFKkEttcyw5 JCr3jeYV7RbhWuPyKFwAJ4EBn/HnUUEsSEKA5/Rr0tvHkR95ytx+2l3qZfihrCsU jsjSMCn4PZ+L3t2OQ2EaVEeiJ4oB4zwi37GZdQGiMQ7T46RkSzwBam6sJETFGPhF TCL70jIwbg== =LCD/ -----END PGP SIGNATURE----- Merge tag 'io_uring-6.17-20250808' of git://git.kernel.dk/linux Pull io_uring fixes from Jens Axboe: - Allow vectorized payloads for send/send-zc - like sendmsg, but without the hassle of a msghdr. - Fix for an integer wrap that should go to stable, spotted by syzbot. Nothing alarming here, as you need to be root to hit this. Nevertheless, it should get fixed. FWIW, kudos to the syzbot crew for having much nicer reproducers now, and with nicely annotated source code as well. This is particularly useful as syzbot uses the raw interface rather than liburing, historically it's been difficult to turn a syzbot reproducer into a meaningful test case. With the recent changes, not true anymore! * tag 'io_uring-6.17-20250808' of git://git.kernel.dk/linux: io_uring/memmap: cast nr_pages to size_t before shifting io_uring/net: Allow to do vectorized send |
||
|
Linus Torvalds
|
6e64f45803 |
Input updates for v6.17-rc0
- updates to several drivers consuming GPIO APIs to use setters returning error codes - an infrastructure allowing to define "overlays" for touchscreens carving out regions implementing buttons and other elements from a bigger sensors and a corresponding update to st1232 driver - an update to AT/PS2 keyboard driver to map F13-F24 by default - Samsung keypad driver got a facelift - evdev input handler will now bind to all devices using EV_SYN event instead of abusing id->driver_info - 2 new sub-drivers implementing 1A (capacitive buttons) and 21 (forcepad button) functions in Synaptics RMI driver - support for polling mode in Goodix touchscreen driver - support for support for FocalTech FT8716 in edt-ft5x06 driver - support for MT6359 in mtk-pmic-keys driver - removal of pcf50633-input driver since platform it was used on is gone - new definitions for game controller "grip" buttons (BTN_GRIP*) and corresponding changes to xpad and hid-steam controller drivers - a new definition for "performance" key -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaJOUOwAKCRBAj56VGEWX nPJTAQC1hrYgCv1L8hxUukbGH5FFPF2nlk63U78izh/dd7R9fwD+OqrQT7+IEr/5 VBqxiqdy77R1mmYs8RpmjOSTg0MEwwg= =jm8o -----END PGP SIGNATURE----- Merge tag 'input-for-v6.17-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - updates to several drivers consuming GPIO APIs to use setters returning error codes - an infrastructure allowing to define "overlays" for touchscreens carving out regions implementing buttons and other elements from a bigger sensors and a corresponding update to st1232 driver - an update to AT/PS2 keyboard driver to map F13-F24 by default - Samsung keypad driver got a facelift - evdev input handler will now bind to all devices using EV_SYN event instead of abusing id->driver_info - two new sub-drivers implementing 1A (capacitive buttons) and 21 (forcepad button) functions in Synaptics RMI driver - support for polling mode in Goodix touchscreen driver - support for support for FocalTech FT8716 in edt-ft5x06 driver - support for MT6359 in mtk-pmic-keys driver - removal of pcf50633-input driver since platform it was used on is gone - new definitions for game controller "grip" buttons (BTN_GRIP*) and corresponding changes to xpad and hid-steam controller drivers - a new definition for "performance" key * tag 'input-for-v6.17-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (38 commits) HID: hid-steam: Use new BTN_GRIP* buttons Input: add keycode for performance mode key Input: max77693 - convert to atomic pwm operation Input: st1232 - add touch-overlay handling dt-bindings: input: touchscreen: st1232: add touch-overlay example Input: touch-overlay - add touchscreen overlay handling dt-bindings: touchscreen: add touch-overlay property Input: atkbd - correctly map F13 - F24 Input: xpad - use new BTN_GRIP* buttons Input: Add and document BTN_GRIP* Input: xpad - change buttons the D-Pad gets mapped as to BTN_DPAD_* Documentation: Fix capitalization of XBox -> Xbox Input: synaptics-rmi4 - add support for F1A dt-bindings: input: syna,rmi4: Document F1A function Input: synaptics-rmi4 - add support for Forcepads (F21) Input: mtk-pmic-keys - add support for MT6359 PMIC keys Input: remove special handling of id->driver_info when matching Input: evdev - switch matching to EV_SYN Input: samsung-keypad - use BIT() and GENMASK() where appropriate Input: samsung-keypad - use per-chip parameters ... |
||
|
Linus Torvalds
|
e8214ed59b |
VFIO updates for v6.17-rc1 v2
- Fix imbalance where the no-iommu/cdev device path skips too much
on open, failing to increment a reference, but still decrements
the reference on close. Add bounds checking to prevent such
underflows. (Jacob Pan)
- Fill missing detach_ioas op for pds_vfio_pci, fixing probe failure
when used with IOMMUFD. (Brett Creeley)
- Split SR-IOV VFs to separate dev_set, avoiding unnecessary
serialization between VFs that appear on the same bus.
(Alex Williamson)
- Fix a theoretical integer overflow is the mlx5-vfio-pci variant
driver. (Artem Sadovnikov)
- Implement missing VF token checking support via vfio cdev/IOMMUFD
interface. (Jason Gunthorpe)
- Update QAT vfio-pci variant driver to claim latest VF devices.
(Małgorzata Mielnik)
- Add a cond_resched() call to avoid holding the CPU too long during
DMA mapping operations. (Keith Busch)
-----BEGIN PGP SIGNATURE-----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=c3K5
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.17-rc1-v2' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Fix imbalance where the no-iommu/cdev device path skips too much on
open, failing to increment a reference, but still decrements the
reference on close. Add bounds checking to prevent such underflows
(Jacob Pan)
- Fill missing detach_ioas op for pds_vfio_pci, fixing probe failure
when used with IOMMUFD (Brett Creeley)
- Split SR-IOV VFs to separate dev_set, avoiding unnecessary
serialization between VFs that appear on the same bus (Alex
Williamson)
- Fix a theoretical integer overflow is the mlx5-vfio-pci variant
driver (Artem Sadovnikov)
- Implement missing VF token checking support via vfio cdev/IOMMUFD
interface (Jason Gunthorpe)
- Update QAT vfio-pci variant driver to claim latest VF devices
(Małgorzata Mielnik)
- Add a cond_resched() call to avoid holding the CPU too long during
DMA mapping operations (Keith Busch)
* tag 'vfio-v6.17-rc1-v2' of https://github.com/awilliam/linux-vfio:
vfio/type1: conditional rescheduling while pinning
vfio/qat: add support for intel QAT 6xxx virtual functions
vfio/qat: Remove myself from VFIO QAT PCI driver maintainers
vfio/pci: Do vf_token checks for VFIO_DEVICE_BIND_IOMMUFD
vfio/mlx5: fix possible overflow in tracking max message size
vfio/pci: Separate SR-IOV VF dev_set
vfio/pds: Fix missing detach_ioas op
vfio: Prevent open_count decrement to negative
vfio: Fix unbalanced vfio_df_close call in no-iommu mode
|
||
|
Jason Gunthorpe
|
86624ba3b5 |
vfio/pci: Do vf_token checks for VFIO_DEVICE_BIND_IOMMUFD
This was missed during the initial implementation. The VFIO PCI encodes
the vf_token inside the device name when opening the device from the group
FD, something like:
"0000:04:10.0 vf_token=bd8d9d2b-5a5f-4f5a-a211-f591514ba1f3"
This is used to control access to a VF unless there is co-ordination with
the owner of the PF.
Since we no longer have a device name in the cdev path, pass the token
directly through VFIO_DEVICE_BIND_IOMMUFD using an optional field
indicated by VFIO_DEVICE_BIND_FLAG_TOKEN.
Fixes: 5fcc26969a16 ("vfio: Add VFIO_DEVICE_BIND_IOMMUFD")
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/0-v3-bdd8716e85fe+3978a-vfio_token_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
||
|
Marcos Alano
|
89c5214639 |
Input: add keycode for performance mode key
Alienware calls this key "Performance Boost". Dell calls it "G-Mode". The goal is to have a specific keycode to detect when this key is pressed, so userspace can act upon it and do what have to do, usually starting the power profile for performance. Signed-off-by: Marcos Alano <marcoshalano@gmail.com> Link: https://lore.kernel.org/r/20250509193708.2190586-1-marcoshalano@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> |
||
|
Dmitry Torokhov
|
a7bee4e7f7 |
Immutable branch between MFD, GPIO, Input and PWM due for the v6.17 merge window
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmhlNWcACgkQUa+KL4f8 d2FKARAAqS2hF4Kf86wdNBaQofYbabXFIZYCbB4OYN/9bHj0yI2Yz/Z8THbEFxVx e/C7ArAf6iVU9ojVUuTnjAB7Nn2qPQ6SqIkNuzF2M9iZM9P1e//7UBzBJDcPnEKA mYUw6XqrskI59QVqfEs8AC1TYa9QYgNDLtOyEHuQ4YdEn1J4BoO0hS8PRTXATISK aSy9n5OlqqgTmVHY18F/Sps39ZqWx2dDQxH4sfJ4hN3marfdk5AxEKYO+sWpHaVC ahi1qqBni1pUXCFpl5Yf09UhTCwDdvpBGwyoPf5bhH6YB3HXxnP8+53dUXNZh2y1 CVILgPyMfdcMxBjYVSNP+uosnMdPVsM/88SLDiadBe7uAi4Qq2ZKWubXS4TQFkSI Du6uKKSIa630ovt8G9kfnN+wEMaxlPTpJ1sITGc6RScN6Q7h80lNnVXxfJZV961C fvbS1TPByMKr3NB0fqHW5DiKKwEdNgQwgK2uc+qyNIMiRMFMGzUja7c3hEWqGHE9 4vGwiMo+Vfohnq2HAeG17N7CPJynSiqxRUL/aSJRmNRAlFwRW9cbqUQ9d7fkaD9j tiNqzTC8qb0bwhlFTxO8hR/VWPU1L4PY7OghKENYfDV2MyvP0njeHFWpZOw3c68A /lObItFnc4Tq4l2q1WZuuVHFfCvhtNV+ge7wNvfxGLzkK/uGfe0= =Vo0F -----END PGP SIGNATURE----- Merge tag 'ib-mfd-gpio-input-pwm-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next Merge an immutable branch between MFD, GPIO, Input and PWM to resolve conflicts for the merge window pull request. |
||
|
Linus Torvalds
|
e991acf1bc |
Significant patch series in this pull request:
- The 2 patch series "squashfs: Remove page->mapping references" from
Matthew Wilcox gets us closer to being able to remove page->mapping.
- The 5 patch series "relayfs: misc changes" from Jason Xing does some
maintenance and minor feature addition work in relayfs.
- The 5 patch series "kdump: crashkernel reservation from CMA" from Jiri
Bohac switches us from static preallocation of the kdump crashkernel's
working memory over to dynamic allocation. So the difficulty of
a-priori estimation of the second kernel's needs is removed and the
first kernel obtains extra memory.
- The 5 patch series "generalize panic_print's dump function to be used
by other kernel parts" from Feng Tang implements some consolidation and
rationalizatio of the various ways in which a faiing kernel splats
information at the operator.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaI+82gAKCRDdBJ7gKXxA
jj4JAP9xb+w9DrBY6sa+7KTPIb+aTqQ7Zw3o9O2m+riKQJv6jAEA6aEwRnDA0451
fDT5IqVlCWGvnVikdZHSnvhdD7TGsQ0=
=rT71
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-08-03-12-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Significant patch series in this pull request:
- "squashfs: Remove page->mapping references" (Matthew Wilcox) gets
us closer to being able to remove page->mapping
- "relayfs: misc changes" (Jason Xing) does some maintenance and
minor feature addition work in relayfs
- "kdump: crashkernel reservation from CMA" (Jiri Bohac) switches
us from static preallocation of the kdump crashkernel's working
memory over to dynamic allocation. So the difficulty of a-priori
estimation of the second kernel's needs is removed and the first
kernel obtains extra memory
- "generalize panic_print's dump function to be used by other
kernel parts" (Feng Tang) implements some consolidation and
rationalization of the various ways in which a failing kernel
splats information at the operator
* tag 'mm-nonmm-stable-2025-08-03-12-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (80 commits)
tools/getdelays: add backward compatibility for taskstats version
kho: add test for kexec handover
delaytop: enhance error logging and add PSI feature description
samples: Kconfig: fix spelling mistake "instancess" -> "instances"
fat: fix too many log in fat_chain_add()
scripts/spelling.txt: add notifer||notifier to spelling.txt
xen/xenbus: fix typo "notifer"
net: mvneta: fix typo "notifer"
drm/xe: fix typo "notifer"
cxl: mce: fix typo "notifer"
KVM: x86: fix typo "notifer"
MAINTAINERS: add maintainers for delaytop
ucount: use atomic_long_try_cmpxchg() in atomic_long_inc_below()
ucount: fix atomic_long_inc_below() argument type
kexec: enable CMA based contiguous allocation
stackdepot: make max number of pools boot-time configurable
lib/xxhash: remove unused functions
init/Kconfig: restore CONFIG_BROKEN help text
lib/raid6: update recov_rvv.c zero page usage
docs: update docs after introducing delaytop
...
|
||
|
Alexander Graf
|
07d2490297 |
kexec: enable CMA based contiguous allocation
When booting a new kernel with kexec_file, the kernel picks a target
location that the kernel should live at, then allocates random pages,
checks whether any of those patches magically happens to coincide with a
target address range and if so, uses them for that range.
For every page allocated this way, it then creates a page list that the
relocation code - code that executes while all CPUs are off and we are
just about to jump into the new kernel - copies to their final memory
location. We can not put them there before, because chances are pretty
good that at least some page in the target range is already in use by the
currently running Linux environment. Copying is happening from a single
CPU at RAM rate, which takes around 4-50 ms per 100 MiB.
All of this is inefficient and error prone.
To successfully kexec, we need to quiesce all devices of the outgoing
kernel so they don't scribble over the new kernel's memory. We have seen
cases where that does not happen properly (*cough* GIC *cough*) and hence
the new kernel was corrupted. This started a month long journey to root
cause failing kexecs to eventually see memory corruption, because the new
kernel was corrupted severely enough that it could not emit output to tell
us about the fact that it was corrupted. By allocating memory for the
next kernel from a memory range that is guaranteed scribbling free, we can
boot the next kernel up to a point where it is at least able to detect
corruption and maybe even stop it before it becomes severe. This
increases the chance for successful kexecs.
Since kexec got introduced, Linux has gained the CMA framework which can
perform physically contiguous memory mappings, while keeping that memory
available for movable memory when it is not needed for contiguous
allocations. The default CMA allocator is for DMA allocations.
This patch adds logic to the kexec file loader to attempt to place the
target payload at a location allocated from CMA. If successful, it uses
that memory range directly instead of creating copy instructions during
the hot phase. To ensure that there is a safety net in case anything goes
wrong with the CMA allocation, it also adds a flag for user space to force
disable CMA allocations.
Using CMA allocations has two advantages:
1) Faster by 4-50 ms per 100 MiB. There is no more need to copy in the
hot phase.
2) More robust. Even if by accident some page is still in use for DMA,
the new kernel image will be safe from that access because it resides
in a memory region that is considered allocated in the old kernel and
has a chance to reinitialize that component.
Link: https://lkml.kernel.org/r/20250610085327.51817-1-graf@amazon.com
Signed-off-by: Alexander Graf <graf@amazon.com>
Acked-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Zhongkun He <hezhongkun.hzk@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Linus Torvalds
|
821c9e515d |
virtio, vhost: features, fixes
vhost can now support legacy threading if enabled in Kconfig vsock memory allocation strategies for large buffers have been improved, reducing pressure on kmalloc vhost now supports the in-order feature guest bits missed the merge window fixes, cleanups all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> -----BEGIN PGP SIGNATURE----- iQFDBAABCgAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmiMvQEPHG1zdEByZWRo YXQuY29tAAoJECgfDbjSjVRpgr8IAKUrIjqqTYXLkbCWn6tK8T+LxZ6LkMkyHA1v AJ+y5fKDeLsT5QpusD1XRjXJVqXBwQEsTN0pNVuhWHlcCpUeOFEHuJaf/QMncbc3 deFlUfMa3ihniUxBuyhojlWURsf94uTC906lCFXlIsfSKH2CW6/SjKvqR0SH5PhN 5WaqRYiSFFwDlyG2Ul4e5temP/er2KuZfYyvcYCU8VdSEp6bjvqCHd9ztFIVuByp fFWsrHce6IqR8ixOOzavEjzfd8WAN3LGzXntj5KEaX3fZ6HxCZCMv+rNVqvJmLps cSrTgIUo60nCiZb8klUCS1YTEEvmdmJg3UmmddIpIhcsCYJSbOU= =2dxm -----END PGP SIGNATURE----- Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio updates from Michael Tsirkin: - vhost can now support legacy threading if enabled in Kconfig - vsock memory allocation strategies for large buffers have been improved, reducing pressure on kmalloc - vhost now supports the in-order feature. guest bits missed the merge window. - fixes, cleanups all over the place * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (30 commits) vsock/virtio: Allocate nonlinear SKBs for handling large transmit buffers vsock/virtio: Rename virtio_vsock_skb_rx_put() vhost/vsock: Allocate nonlinear SKBs for handling large receive buffers vsock/virtio: Move SKB allocation lower-bound check to callers vsock/virtio: Rename virtio_vsock_alloc_skb() vsock/virtio: Resize receive buffers so that each SKB fits in a 4K page vsock/virtio: Move length check to callers of virtio_vsock_skb_rx_put() vsock/virtio: Validate length in packet header before skb_put() vhost/vsock: Avoid allocating arbitrarily-sized SKBs vhost_net: basic in_order support vhost: basic in order support vhost: fail early when __vhost_add_used() fails vhost: Reintroduce kthread API and add mode selection vdpa: Fix IDR memory leak in VDUSE module exit vdpa/mlx5: Fix release of uninitialized resources on error path vhost-scsi: Fix check for inline_sg_cnt exceeding preallocated limit virtio: virtio_dma_buf: fix missing parameter documentation vhost: Fix typos vhost: vringh: Remove unused functions vhost: vringh: Remove unused iotlb functions ... |
||
|
Linus Torvalds
|
0bd0a41a51 |
pci-v6.17-changes
-----BEGIN PGP SIGNATURE-----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=ipv3
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Allow built-in drivers, not just modular drivers, to use async
initial probing (Lukas Wunner)
- Support Immediate Readiness even on devices with no PM Capability
(Sean Christopherson)
- Consolidate definition of PCIE_RESET_CONFIG_WAIT_MS (100ms), the
required delay between a reset and sending config requests to a
device (Niklas Cassel)
- Add pci_is_display() to check for "Display" base class and use it
in ALSA hda, vfio, vga_switcheroo, vt-d (Mario Limonciello)
- Allow 'isolated PCI functions' (multi-function devices without a
function 0) for LoongArch, similar to s390 and jailhouse (Huacai
Chen)
Power control:
- Add ability to enable optional slot clock for cases where the PCIe
host controller and the slot are supplied by different clocks
(Marek Vasut)
PCIe native device hotplug:
- Fix runtime PM ref imbalance on Hot-Plug Capable ports caused by
misinterpreting a config read failure after a device has been
removed (Lukas Wunner)
- Avoid creating a useless PCIe port service device for pciehp if the
slot is handled by the ACPI hotplug driver (Lukas Wunner)
- Ignore ACPI hotplug slots when calculating depth of pciehp hotplug
ports (Lukas Wunner)
Virtualization:
- Save VF resizable BAR state and restore it after reset (Michał
Winiarski)
- Allow IOV resources (VF BARs) to be resized (Michał Winiarski)
- Add pci_iov_vf_bar_set_size() so drivers can control VF BAR size
(Michał Winiarski)
Endpoint framework:
- Add RC-to-EP doorbell support using platform MSI controller,
including a test case (Frank Li)
- Allow BAR assignment via configfs so platforms have flexibility in
determining BAR usage (Jerome Brunet)
Native PCIe controller drivers:
- Convert amazon,al-alpine-v[23]-pcie, apm,xgene-pcie,
axis,artpec6-pcie, marvell,armada-3700-pcie, st,spear1340-pcie to
DT schema format (Rob Herring)
- Use dev_fwnode() instead of of_fwnode_handle() to remove OF
dependency in altera (fixes an unused variable), designware-host,
mediatek, mediatek-gen3, mobiveil, plda, xilinx, xilinx-dma,
xilinx-nwl (Jiri Slaby, Arnd Bergmann)
- Convert aardvark, altera, brcmstb, designware-host, iproc,
mediatek, mediatek-gen3, mobiveil, plda, rcar-host, vmd, xilinx,
xilinx-dma, xilinx-nwl from using pci_msi_create_irq_domain() to
using msi_create_parent_irq_domain() instead; this makes the
interrupt controller per-PCI device, allows dynamic allocation of
vectors after initialization, and allows support of IMS (Nam Cao)
APM X-Gene PCIe controller driver:
- Rewrite MSI handling to MSI CPU affinity, drop useless CPU hotplug
bits, use device-managed memory allocations, and clean things up
(Marc Zyngier)
- Probe xgene-msi as a standard platform driver rather than a
subsys_initcall (Marc Zyngier)
Broadcom STB PCIe controller driver:
- Add optional DT 'num-lanes' property and if present, use it to
override the Maximum Link Width advertised in Link Capabilities
(Jim Quinlan)
Cadence PCIe controller driver:
- Use PCIe Message routing types from the PCI core rather than
defining private ones (Hans Zhang)
Freescale i.MX6 PCIe controller driver:
- Add IMX8MQ_EP third 64-bit BAR in epc_features (Richard Zhu)
- Add IMX8MM_EP and IMX8MP_EP fixed 256-byte BAR 4 in epc_features
(Richard Zhu)
- Configure LUT for MSI/IOMMU in Endpoint mode so Root Complex can
trigger doorbel on Endpoint (Frank Li)
- Remove apps_reset (LTSSM_EN) from
imx_pcie_{assert,deassert}_core_reset(), which fixes a hotplug
regression on i.MX8MM (Richard Zhu)
- Delay Endpoint link start until configfs 'start' written (Richard
Zhu)
Intel VMD host bridge driver:
- Add Intel Panther Lake (PTL)-H/P/U Vendor ID (George D Sworo)
Qualcomm PCIe controller driver:
- Add DT binding and driver support for SA8255p, which supports ECAM
for Configuration Space access (Mayank Rana)
- Update DT binding and driver to describe PHYs and per-Root Port
resets in a Root Port stanza and deprecate describing them in the
host bridge; this makes it possible to support multiple Root Ports
in the future (Krishna Chaitanya Chundru)
- Add Qualcomm QCS615 to SM8150 DT binding (Ziyue Zhang)
- Add Qualcomm QCS8300 to SA8775p DT binding (Ziyue Zhang)
- Drop TBU and ref clocks from Qualcomm SM8150 and SC8180x DT
bindings (Konrad Dybcio)
- Document 'link_down' reset in Qualcomm SA8775P DT binding (Ziyue
Zhang)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Rockchip PCIe controller driver:
- Drop unused PCIe Message routing and code definitions (Hans Zhang)
- Remove several unused header includes (Hans Zhang)
- Use standard PCIe config register definitions instead of
rockchip-specific redefinitions (Geraldo Nascimento)
- Set Target Link Speed to 5.0 GT/s before retraining so we have a
chance to train at a higher speed (Geraldo Nascimento)
Rockchip DesignWare PCIe controller driver:
- Prevent race between link training and register update via DBI by
inhibiting link training after hot reset and link down (Wilfred
Mallawa)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Sophgo PCIe controller driver:
- Add DT binding and driver for Sophgo SG2044 PCIe controller driver
in Root Complex mode (Inochi Amaoto)
Synopsys DesignWare PCIe controller driver:
- Add required PCIE_RESET_CONFIG_WAIT_MS after waiting for Link up on
Ports that support > 5.0 GT/s. Slower Ports still rely on the
not-quite-correct PCIE_LINK_WAIT_SLEEP_MS 90ms default delay while
waiting for the Link (Niklas Cassel)"
* tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
dt-bindings: PCI: qcom,pcie-sa8775p: Document 'link_down' reset
dt-bindings: PCI: Remove 83xx-512x-pci.txt
dt-bindings: PCI: Convert amazon,al-alpine-v[23]-pcie to DT schema
dt-bindings: PCI: Convert marvell,armada-3700-pcie to DT schema
dt-bindings: PCI: Convert apm,xgene-pcie to DT schema
dt-bindings: PCI: Convert axis,artpec6-pcie to DT schema
dt-bindings: PCI: Convert st,spear1340-pcie to DT schema
PCI: Move is_pciehp check out of pciehp_is_native()
PCI: pciehp: Use is_pciehp instead of is_hotplug_bridge
PCI/portdrv: Use is_pciehp instead of is_hotplug_bridge
PCI/ACPI: Fix runtime PM ref imbalance on Hot-Plug Capable ports
selftests: pci_endpoint: Add doorbell test case
misc: pci_endpoint_test: Add doorbell test case
PCI: endpoint: pci-epf-test: Add doorbell test support
PCI: endpoint: Add pci_epf_align_inbound_addr() helper for inbound address alignment
PCI: endpoint: pci-ep-msi: Add checks for MSI parent and mutability
PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
PCI: dwc: Add Sophgo SG2044 PCIe controller driver in Root Complex mode
PCI: vmd: Switch to msi_create_parent_irq_domain()
PCI: vmd: Convert to lock guards
...
|
||
|
Cindy Lu
|
7d9896e9f6 |
vhost: Reintroduce kthread API and add mode selection
Since commit 6e890c5d5021 ("vhost: use vhost_tasks for worker threads"),
the vhost uses vhost_task and operates as a child of the
owner thread. This is required for correct CPU usage accounting,
especially when using containers.
However, this change has caused confusion for some legacy
userspace applications, and we didn't notice until it's too late.
Unfortunately, it's too late to revert - we now have userspace
depending both on old and new behaviour :(
To address the issue, reintroduce kthread mode for vhost workers and
provide a configuration to select between kthread and task worker.
- Add 'fork_owner' parameter to vhost_dev to let users select kthread
or task mode. Default mode is task mode(VHOST_FORK_OWNER_TASK).
- Reintroduce kthread mode support:
* Bring back the original vhost_worker() implementation,
and renamed to vhost_run_work_kthread_list().
* Add cgroup support for the kthread
* Introduce struct vhost_worker_ops:
- Encapsulates create / stop / wake‑up callbacks.
- vhost_worker_create() selects the proper ops according to
inherit_owner.
- Userspace configuration interface:
* New IOCTLs:
- VHOST_SET_FORK_FROM_OWNER lets userspace select task mode
(VHOST_FORK_OWNER_TASK) or kthread mode (VHOST_FORK_OWNER_KTHREAD)
- VHOST_GET_FORK_FROM_OWNER reads the current worker mode
* Expose module parameter 'fork_from_owner_default' to allow system
administrators to configure the default mode for vhost workers
* Kconfig option CONFIG_VHOST_ENABLE_FORK_OWNER_CONTROL controls whether
these IOCTLs and the parameter are available
- The VHOST_NEW_WORKER functionality requires fork_owner to be set
to true, with validation added to ensure proper configuration
This partially reverts or improves upon:
commit 6e890c5d5021 ("vhost: use vhost_tasks for worker threads")
commit 1cdaafa1b8b4 ("vhost: replace single worker pointer with xarray")
Fixes: 6e890c5d5021 ("vhost: use vhost_tasks for worker threads"),
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20250714071333.59794-2-lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
||
|
Jiri Slaby (SUSE)
|
55a984928b |
Revert "tty: vt: use _IO() to define ioctl numbers"
This reverts commit f1180ca37abe3d117e4a19be12142fe722612a7c. Since the commit, the vt ioctl numbers are defined differently on platforms where _IOC_NONE is non-zero: alpha, mips, powerpc, sparc. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu> Link: https://lore.kernel.org/all/436489B9-E67B-4630-909F-386C30A2AAC9@xenosoft.de/ Link: https://lore.kernel.org/all/97ec2636-915a-498c-903b-d66957420d21@csgroup.eu/ Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20250801082613.2564584-1-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Bjorn Helgaas
|
63e6f0df6a |
Merge branch 'pci/endpoint/doorbell'
- Add RC-to-EP doorbell support using platform MSI controller (Frank Li) - Check for MSI parent and mutability since we currently don't support mutable MSI controllers (Frank Li) - Add pci_epf_align_inbound_addr() helper (Frank Li) - Add a doorbell test (Frank Li) * pci/endpoint/doorbell: selftests: pci_endpoint: Add doorbell test case misc: pci_endpoint_test: Add doorbell test case PCI: endpoint: pci-epf-test: Add doorbell test support PCI: endpoint: Add pci_epf_align_inbound_addr() helper for inbound address alignment PCI: endpoint: pci-ep-msi: Add checks for MSI parent and mutability PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller |
||
|
Linus Torvalds
|
0cdee263bc |
[GIT PULL for v6.17] media updates
-----BEGIN PGP SIGNATURE-----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=oX7n
-----END PGP SIGNATURE-----
Merge tag 'media/v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- v4l2 core:
- sub-device framework routing improvements
- NV12M tiled variants added to v4l2_format_info
- some fixes at control handler freeing logic
- fixed H264 SEPARATE_COLOUR_PLANE check
- new staging driver: Intel IPU7 PCI
- Rockchip video decoder driver got promoted from staging
- iris: added HEVC/VP9 encoder/decoder support
- vsp1: driver has gained Renesas VSPX support
- uvc:
- switched to vb2 ioctl helpers
- added MSXU 1.5 metadata support
- atomisp: GC0310 sensor driver cleanups in preparation for moving it
out of staging
- Lots of cleanup, fixes and improvements
* tag 'media/v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (310 commits)
media: rkvdec: Unstage the driver
media: rkvdec: Remove TODO file
media: dt-bindings: rockchip: Add RK3576 Video Decoder bindings
media: dt-bindings: rockchip: Document RK3588 Video Decoder bindings
media: amphion: Support dmabuf and v4l2 buffer without binding
media: verisilicon: postproc: 4K support
media: v4l2: Add support for NV12M tiled variants to v4l2_format_info()
media: uvcvideo: Use a count variable for meta_formats instead of 0 terminating
media: uvcvideo: Auto-set UVC_QUIRK_MSXU_META
media: uvcvideo: Introduce V4L2_META_FMT_UVC_MSXU_1_5
media: uvcvideo: Introduce dev->meta_formats
media: Documentation: Add note about UVCH length field
media: uvcvideo: Do not mark valid metadata as invalid
media: uvcvideo: uvc_v4l2_unlocked_ioctl: Invert PM logic
media: core: export v4l2_translate_cmd
media: uvcvideo: Turn on the camera if V4L2_EVENT_SUB_FL_SEND_INITIAL
media: uvcvideo: Remove stream->is_streaming field
media: uvcvideo: Split uvc_stop_streaming()
media: uvcvideo: Handle locks in uvc_queue_return_buffers
media: uvcvideo: Use vb2 ioctl and fop helpers
...
|
||
|
Linus Torvalds
|
c93529ad4f |
iommufd 6.17 merge window pull
- IOMMU HW now has features to directly assign HW command queues to a
guest VM. In this mode the command queue operates on a limited set of
invalidation commands that are suitable for improving guest invalidation
performance and easy for the HW to virtualize.
This PR brings the generic infrastructure to allow IOMMU drivers to
expose such command queues through the iommufd uAPI, mmap the doorbell
pages, and get the guest physical range for the command queue ring
itself.
- An implementation for the NVIDIA SMMUv3 extension "cmdqv" is built on
the new iommufd command queue features. It works with the existing SMMU
driver support for cmdqv in guest VMs.
- Many precursor cleanups and improvements to support the above cleanly,
changes to the general ioctl and object helpers, driver support for
VDEVICE, and mmap pgoff cookie infrastructure.
- Sequence VDEVICE destruction to always happen before VFIO device
destruction. When using the above type features, and also in future
confidential compute, the internal virtual device representation becomes
linked to HW or CC TSM configuration and objects. If a VFIO device is
removed from iommufd those HW objects should also be cleaned up to
prevent a sort of UAF. This became important now that we have HW backing
the VDEVICE.
- Fix one syzkaller found error related to math overflows during iova
allocation
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaIpl9AAKCRCFwuHvBreF
YS5tAP9MDIRML5a/2IOhzcsc4LiDkWTMKm2m1wcRYd+iU2aFVQEAjdghINLHrUlx
HVuIDvNvWIUED/oTAp5kCxQ7PBFN4gU=
=NmCO
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"This broadly brings the assigned HW command queue support to iommufd.
This feature is used to improve SVA performance in VMs by avoiding
paravirtualization traps during SVA invalidations.
Along the way I think some of the core logic is in a much better state
to support future driver backed features.
Summary:
- IOMMU HW now has features to directly assign HW command queues to a
guest VM. In this mode the command queue operates on a limited set
of invalidation commands that are suitable for improving guest
invalidation performance and easy for the HW to virtualize.
This brings the generic infrastructure to allow IOMMU drivers to
expose such command queues through the iommufd uAPI, mmap the
doorbell pages, and get the guest physical range for the command
queue ring itself.
- An implementation for the NVIDIA SMMUv3 extension "cmdqv" is built
on the new iommufd command queue features. It works with the
existing SMMU driver support for cmdqv in guest VMs.
- Many precursor cleanups and improvements to support the above
cleanly, changes to the general ioctl and object helpers, driver
support for VDEVICE, and mmap pgoff cookie infrastructure.
- Sequence VDEVICE destruction to always happen before VFIO device
destruction. When using the above type features, and also in future
confidential compute, the internal virtual device representation
becomes linked to HW or CC TSM configuration and objects. If a VFIO
device is removed from iommufd those HW objects should also be
cleaned up to prevent a sort of UAF. This became important now that
we have HW backing the VDEVICE.
- Fix one syzkaller found error related to math overflows during iova
allocation"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (57 commits)
iommu/arm-smmu-v3: Replace vsmmu_size/type with get_viommu_size
iommu/arm-smmu-v3: Do not bother impl_ops if IOMMU_VIOMMU_TYPE_ARM_SMMUV3
iommufd: Rename some shortterm-related identifiers
iommufd/selftest: Add coverage for vdevice tombstone
iommufd/selftest: Explicitly skip tests for inapplicable variant
iommufd/vdevice: Remove struct device reference from struct vdevice
iommufd: Destroy vdevice on idevice destroy
iommufd: Add a pre_destroy() op for objects
iommufd: Add iommufd_object_tombstone_user() helper
iommufd/viommu: Roll back to use iommufd_object_alloc() for vdevice
iommufd/selftest: Test reserved regions near ULONG_MAX
iommufd: Prevent ALIGN() overflow
iommu/tegra241-cmdqv: import IOMMUFD module namespace
iommufd: Do not allow _iommufd_object_alloc_ucmd if abort op is set
iommu/tegra241-cmdqv: Add IOMMU_VEVENTQ_TYPE_TEGRA241_CMDQV support
iommu/tegra241-cmdqv: Add user-space use support
iommu/tegra241-cmdqv: Do not statically map LVCMDQs
iommu/tegra241-cmdqv: Simplify deinit flow in tegra241_cmdqv_remove_vintf()
iommu/tegra241-cmdqv: Use request_threaded_irq
iommu/arm-smmu-v3-iommufd: Add hw_info to impl_ops
...
|
||
|
Linus Torvalds
|
12ed593ee8 |
Capabilities update for 6.17
This branch contains two patches:
cdd73b1666079a73d061396f361df55d59fe96e6 uapi: fix broken link in linux/capability.h
This updates documentation in capability.h.
337490f0007f910968f828e46501db3091b1a4f8 exec: Correct the permission check for unsafe exec
This is not a trivial patch, but fixes a real problem where during
exec, different effective and real credentials were assumed to mean
changed credentials, making it impossible in the no-new-privs case
to keep different uid and euid.
These are available at:
git://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux.git #caps-pr-20250729
on top of commit 19272b37aa4f83ca52bdf9c16d5d81bdd1354494 (tag: v6.16-rc1)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEqb0/8XByttt4D8+UNXDaFycKziQFAmiJHCIACgkQNXDaFycK
ziRz0QgAqDCdWBrwS/icfXnkV+fcB8J/p/JP+5DO4stn9vV97j+RC3WLc/Wlj5tl
jLbGGd8eWnCYyTaUHlhE81Qw4b5iQKkd6umGSIBoQVu00YiJ3pLaYsIkEaEMDIkG
2qS5oNyDEFho8g05++mmTfGMeFQJ4mUEwUmcnsCcTH3bkvcVinlZwP6Lfitmt0lH
yS0xeMf+gBINou1yTPLdMCCv8LAac2qBcMWhWk4NBEFZJoM0S/Rg5RhdiYYNYYAj
fi96cTG7qbv80a3M6e/7ta4hU+XdU6JuzQRQJeZstFj2oRfTx2CRR1Wgbus4KdlP
x/5Sc3bT/ovdPwDc/5HTeFXAlqIqmQ==
=uKJr
-----END PGP SIGNATURE-----
commit cdd73b1666079a73d061396f361df55d59fe96e6
Author: Ariel Otilibili <ariel.otilibili-anieli@eurecom.fr>
Date: Wed Jul 2 12:00:21 2025 +0200
uapi: fix broken link in linux/capability.h
The link to the libcap library is outdated. Instead, use a link to the
libcap2 library.
As well, give the complete reference of the POSIX compliance.
Signed-off-by: Ariel Otilibili <ariel.otilibili-anieli@eurecom.fr>
Acked-by: Andrew G. Morgan <morgan@kernel.org>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Serge Hallyn <sergeh@kernel.org>
diff --git a/include/uapi/linux/capability.h b/include/uapi/linux/capability.h
index 2e21b5594f81..ea5a0899ecf0 100644
--- a/include/uapi/linux/capability.h
+++ b/include/uapi/linux/capability.h
@@ -6,9 +6,10 @@
* Alexander Kjeldaas <astor@guardian.no>
* with help from Aleph1, Roland Buresund and Andrew Main.
*
- * See here for the libcap library ("POSIX draft" compliance):
+ * See here for the libcap2 library (compliant with Section 25 of
+ * the withdrawn POSIX 1003.1e Draft 17):
*
- * ftp://www.kernel.org/pub/linux/libs/security/linux-privs/kernel-2.6/
+ * https://www.kernel.org/pub/linux/libs/security/linux-privs/libcap2/
*/
#ifndef _UAPI_LINUX_CAPABILITY_H
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEqb0/8XByttt4D8+UNXDaFycKziQFAmiJHhoACgkQNXDaFycK
ziQXVQgAn7931CkRAKZXcukfluPWFsanPGoBKqT+UFVjjUenDtd/GXZQwahRwweS
k7zDDa/JE59yMHKNenslLgV1PYb3/ZtBMDq+8/LXQ/JMkaZYpNhPPo0lUa70s3pM
EdY4qbB+aNWeAoHTltRkRkbDHWak3sNjlRyavQj2n7uCOXdSHp4yAVOgiMqxAUX8
o/V6M6dHA2iN0HEKV+Mp5vHY+9TTFv8dTygNxb1995n1QfHT/AFOTOO598FHkYxA
aSR8kSpdULdGExk+7Q2NsJoX38zsZIaaI75MQw9Tz5iRkYFZG3hcJVYNbZyT10s+
NwteAaDfTqTz78QB3PcG794CQls8vQ==
=yLTV
-----END PGP SIGNATURE-----
Merge tag 'caps-pr-20250729' of git://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux
Pull capabilities update from Serge Hallyn:
- Fix broken link in documentation in capability.h
- Correct the permission check for unsafe exec
During exec, different effective and real credentials were assumed to
mean changed credentials, making it impossible in the no-new-privs
case to keep different uid and euid
* tag 'caps-pr-20250729' of git://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux:
uapi: fix broken link in linux/capability.h
exec: Correct the permission check for unsafe exec
|
||
|
Linus Torvalds
|
63eb28bb14 |
ARM:
- Host driver for GICv5, the next generation interrupt controller for arm64, including support for interrupt routing, MSIs, interrupt translation and wired interrupts. - Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on GICv5 hardware, leveraging the legacy VGIC interface. - Userspace control of the 'nASSGIcap' GICv3 feature, allowing userspace to disable support for SGIs w/o an active state on hardware that previously advertised it unconditionally. - Map supporting endpoints with cacheable memory attributes on systems with FEAT_S2FWB and DIC where KVM no longer needs to perform cache maintenance on the address range. - Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the guest hypervisor to inject external aborts into an L2 VM and take traps of masked external aborts to the hypervisor. - Convert more system register sanitization to the config-driven implementation. - Fixes to the visibility of EL2 registers, namely making VGICv3 system registers accessible through the VGIC device instead of the ONE_REG vCPU ioctls. - Various cleanups and minor fixes. LoongArch: - Add stat information for in-kernel irqchip - Add tracepoints for CPUCFG and CSR emulation exits - Enhance in-kernel irqchip emulation - Various cleanups. RISC-V: - Enable ring-based dirty memory tracking - Improve perf kvm stat to report interrupt events - Delegate illegal instruction trap to VS-mode - MMU improvements related to upcoming nested virtualization s390x - Fixes x86: - Add CONFIG_KVM_IOAPIC for x86 to allow disabling support for I/O APIC, PIC, and PIT emulation at compile time. - Share device posted IRQ code between SVM and VMX and harden it against bugs and runtime errors. - Use vcpu_idx, not vcpu_id, for GA log tag/metadata, to make lookups O(1) instead of O(n). - For MMIO stale data mitigation, track whether or not a vCPU has access to (host) MMIO based on whether the page tables have MMIO pfns mapped; using VFIO is prone to false negatives - Rework the MSR interception code so that the SVM and VMX APIs are more or less identical. - Recalculate all MSR intercepts from scratch on MSR filter changes, instead of maintaining shadow bitmaps. - Advertise support for LKGS (Load Kernel GS base), a new instruction that's loosely related to FRED, but is supported and enumerated independently. - Fix a user-triggerable WARN that syzkaller found by setting the vCPU in INIT_RECEIVED state (aka wait-for-SIPI), and then putting the vCPU into VMX Root Mode (post-VMXON). Trying to detect every possible path leading to architecturally forbidden states is hard and even risks breaking userspace (if it goes from valid to valid state but passes through invalid states), so just wait until KVM_RUN to detect that the vCPU state isn't allowed. - Add KVM_X86_DISABLE_EXITS_APERFMPERF to allow disabling interception of APERF/MPERF reads, so that a "properly" configured VM can access APERF/MPERF. This has many caveats (APERF/MPERF cannot be zeroed on vCPU creation or saved/restored on suspend and resume, or preserved over thread migration let alone VM migration) but can be useful whenever you're interested in letting Linux guests see the effective physical CPU frequency in /proc/cpuinfo. - Reject KVM_SET_TSC_KHZ for vm file descriptors if vCPUs have been created, as there's no known use case for changing the default frequency for other VM types and it goes counter to the very reason why the ioctl was added to the vm file descriptor. And also, there would be no way to make it work for confidential VMs with a "secure" TSC, so kill two birds with one stone. - Dynamically allocation the shadow MMU's hashed page list, and defer allocating the hashed list until it's actually needed (the TDP MMU doesn't use the list). - Extract many of KVM's helpers for accessing architectural local APIC state to common x86 so that they can be shared by guest-side code for Secure AVIC. - Various cleanups and fixes. x86 (Intel): - Preserve the host's DEBUGCTL.FREEZE_IN_SMM when running the guest. Failure to honor FREEZE_IN_SMM can leak host state into guests. - Explicitly check vmcs12.GUEST_DEBUGCTL on nested VM-Enter to prevent L1 from running L2 with features that KVM doesn't support, e.g. BTF. x86 (AMD): - WARN and reject loading kvm-amd.ko instead of panicking the kernel if the nested SVM MSRPM offsets tracker can't handle an MSR (which is pretty much a static condition and therefore should never happen, but still). - Fix a variety of flaws and bugs in the AVIC device posted IRQ code. - Inhibit AVIC if a vCPU's ID is too big (relative to what hardware supports) instead of rejecting vCPU creation. - Extend enable_ipiv module param support to SVM, by simply leaving IsRunning clear in the vCPU's physical ID table entry. - Disable IPI virtualization, via enable_ipiv, if the CPU is affected by erratum #1235, to allow (safely) enabling AVIC on such CPUs. - Request GA Log interrupts if and only if the target vCPU is blocking, i.e. only if KVM needs a notification in order to wake the vCPU. - Intercept SPEC_CTRL on AMD if the MSR shouldn't exist according to the vCPU's CPUID model. - Accept any SNP policy that is accepted by the firmware with respect to SMT and single-socket restrictions. An incompatible policy doesn't put the kernel at risk in any way, so there's no reason for KVM to care. - Drop a superfluous WBINVD (on all CPUs!) when destroying a VM and use WBNOINVD instead of WBINVD when possible for SEV cache maintenance. - When reclaiming memory from an SEV guest, only do cache flushes on CPUs that have ever run a vCPU for the guest, i.e. don't flush the caches for CPUs that can't possibly have cache lines with dirty, encrypted data. Generic: - Rework irqbypass to track/match producers and consumers via an xarray instead of a linked list. Using a linked list leads to O(n^2) insertion times, which is hugely problematic for use cases that create large numbers of VMs. Such use cases typically don't actually use irqbypass, but eliminating the pointless registration is a future problem to solve as it likely requires new uAPI. - Track irqbypass's "token" as "struct eventfd_ctx *" instead of a "void *", to avoid making a simple concept unnecessarily difficult to understand. - Decouple device posted IRQs from VFIO device assignment, as binding a VM to a VFIO group is not a requirement for enabling device posted IRQs. - Clean up and document/comment the irqfd assignment code. - Disallow binding multiple irqfds to an eventfd with a priority waiter, i.e. ensure an eventfd is bound to at most one irqfd through the entire host, and add a selftest to verify eventfd:irqfd bindings are globally unique. - Add a tracepoint for KVM_SET_MEMORY_ATTRIBUTES to help debug issues related to private <=> shared memory conversions. - Drop guest_memfd's .getattr() implementation as the VFS layer will call generic_fillattr() if inode_operations.getattr is NULL. - Fix issues with dirty ring harvesting where KVM doesn't bound the processing of entries in any way, which allows userspace to keep KVM in a tight loop indefinitely. - Kill off kvm_arch_{start,end}_assignment() and x86's associated tracking, now that KVM no longer uses assigned_device_count as a heuristic for either irqbypass usage or MDS mitigation. Selftests: - Fix a comment typo. - Verify KVM is loaded when getting any KVM module param so that attempting to run a selftest without kvm.ko loaded results in a SKIP message about KVM not being loaded/enabled (versus some random parameter not existing). - Skip tests that hit EACCES when attempting to access a file, and rpint a "Root required?" help message. In most cases, the test just needs to be run with elevated permissions. -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmiKXMgUHHBib256aW5p QHJlZGhhdC5jb20ACgkQv/vSX3jHroMhMQf/QDhC/CP1aGXph2whuyeD2NMqPKiU 9KdnDNST+ftPwjg9QxZ9mTaa8zeVz/wly6XlxD9OQHy+opM1wcys3k0GZAFFEEQm YrThgURdzEZ3nwJZgb+m0t4wjJQtpiFIBwAf7qq6z1VrqQBEmHXJ/8QxGuqO+BNC j5q/X+q6KZwehKI6lgFBrrOKWFaxqhnRAYfW6rGBxRXxzTJuna37fvDpodQnNceN zOiq+avfriUMArTXTqOteJNKU0229HjiPSnjILLnFQ+B3akBlwNG0jk7TMaAKR6q IZWG1EIS9q1BAkGXaw6DE1y6d/YwtXCR5qgAIkiGwaPt5yj9Oj6kRN2Ytw== =j2At -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm updates from Paolo Bonzini: "ARM: - Host driver for GICv5, the next generation interrupt controller for arm64, including support for interrupt routing, MSIs, interrupt translation and wired interrupts - Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on GICv5 hardware, leveraging the legacy VGIC interface - Userspace control of the 'nASSGIcap' GICv3 feature, allowing userspace to disable support for SGIs w/o an active state on hardware that previously advertised it unconditionally - Map supporting endpoints with cacheable memory attributes on systems with FEAT_S2FWB and DIC where KVM no longer needs to perform cache maintenance on the address range - Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the guest hypervisor to inject external aborts into an L2 VM and take traps of masked external aborts to the hypervisor - Convert more system register sanitization to the config-driven implementation - Fixes to the visibility of EL2 registers, namely making VGICv3 system registers accessible through the VGIC device instead of the ONE_REG vCPU ioctls - Various cleanups and minor fixes LoongArch: - Add stat information for in-kernel irqchip - Add tracepoints for CPUCFG and CSR emulation exits - Enhance in-kernel irqchip emulation - Various cleanups RISC-V: - Enable ring-based dirty memory tracking - Improve perf kvm stat to report interrupt events - Delegate illegal instruction trap to VS-mode - MMU improvements related to upcoming nested virtualization s390x - Fixes x86: - Add CONFIG_KVM_IOAPIC for x86 to allow disabling support for I/O APIC, PIC, and PIT emulation at compile time - Share device posted IRQ code between SVM and VMX and harden it against bugs and runtime errors - Use vcpu_idx, not vcpu_id, for GA log tag/metadata, to make lookups O(1) instead of O(n) - For MMIO stale data mitigation, track whether or not a vCPU has access to (host) MMIO based on whether the page tables have MMIO pfns mapped; using VFIO is prone to false negatives - Rework the MSR interception code so that the SVM and VMX APIs are more or less identical - Recalculate all MSR intercepts from scratch on MSR filter changes, instead of maintaining shadow bitmaps - Advertise support for LKGS (Load Kernel GS base), a new instruction that's loosely related to FRED, but is supported and enumerated independently - Fix a user-triggerable WARN that syzkaller found by setting the vCPU in INIT_RECEIVED state (aka wait-for-SIPI), and then putting the vCPU into VMX Root Mode (post-VMXON). Trying to detect every possible path leading to architecturally forbidden states is hard and even risks breaking userspace (if it goes from valid to valid state but passes through invalid states), so just wait until KVM_RUN to detect that the vCPU state isn't allowed - Add KVM_X86_DISABLE_EXITS_APERFMPERF to allow disabling interception of APERF/MPERF reads, so that a "properly" configured VM can access APERF/MPERF. This has many caveats (APERF/MPERF cannot be zeroed on vCPU creation or saved/restored on suspend and resume, or preserved over thread migration let alone VM migration) but can be useful whenever you're interested in letting Linux guests see the effective physical CPU frequency in /proc/cpuinfo - Reject KVM_SET_TSC_KHZ for vm file descriptors if vCPUs have been created, as there's no known use case for changing the default frequency for other VM types and it goes counter to the very reason why the ioctl was added to the vm file descriptor. And also, there would be no way to make it work for confidential VMs with a "secure" TSC, so kill two birds with one stone - Dynamically allocation the shadow MMU's hashed page list, and defer allocating the hashed list until it's actually needed (the TDP MMU doesn't use the list) - Extract many of KVM's helpers for accessing architectural local APIC state to common x86 so that they can be shared by guest-side code for Secure AVIC - Various cleanups and fixes x86 (Intel): - Preserve the host's DEBUGCTL.FREEZE_IN_SMM when running the guest. Failure to honor FREEZE_IN_SMM can leak host state into guests - Explicitly check vmcs12.GUEST_DEBUGCTL on nested VM-Enter to prevent L1 from running L2 with features that KVM doesn't support, e.g. BTF x86 (AMD): - WARN and reject loading kvm-amd.ko instead of panicking the kernel if the nested SVM MSRPM offsets tracker can't handle an MSR (which is pretty much a static condition and therefore should never happen, but still) - Fix a variety of flaws and bugs in the AVIC device posted IRQ code - Inhibit AVIC if a vCPU's ID is too big (relative to what hardware supports) instead of rejecting vCPU creation - Extend enable_ipiv module param support to SVM, by simply leaving IsRunning clear in the vCPU's physical ID table entry - Disable IPI virtualization, via enable_ipiv, if the CPU is affected by erratum #1235, to allow (safely) enabling AVIC on such CPUs - Request GA Log interrupts if and only if the target vCPU is blocking, i.e. only if KVM needs a notification in order to wake the vCPU - Intercept SPEC_CTRL on AMD if the MSR shouldn't exist according to the vCPU's CPUID model - Accept any SNP policy that is accepted by the firmware with respect to SMT and single-socket restrictions. An incompatible policy doesn't put the kernel at risk in any way, so there's no reason for KVM to care - Drop a superfluous WBINVD (on all CPUs!) when destroying a VM and use WBNOINVD instead of WBINVD when possible for SEV cache maintenance - When reclaiming memory from an SEV guest, only do cache flushes on CPUs that have ever run a vCPU for the guest, i.e. don't flush the caches for CPUs that can't possibly have cache lines with dirty, encrypted data Generic: - Rework irqbypass to track/match producers and consumers via an xarray instead of a linked list. Using a linked list leads to O(n^2) insertion times, which is hugely problematic for use cases that create large numbers of VMs. Such use cases typically don't actually use irqbypass, but eliminating the pointless registration is a future problem to solve as it likely requires new uAPI - Track irqbypass's "token" as "struct eventfd_ctx *" instead of a "void *", to avoid making a simple concept unnecessarily difficult to understand - Decouple device posted IRQs from VFIO device assignment, as binding a VM to a VFIO group is not a requirement for enabling device posted IRQs - Clean up and document/comment the irqfd assignment code - Disallow binding multiple irqfds to an eventfd with a priority waiter, i.e. ensure an eventfd is bound to at most one irqfd through the entire host, and add a selftest to verify eventfd:irqfd bindings are globally unique - Add a tracepoint for KVM_SET_MEMORY_ATTRIBUTES to help debug issues related to private <=> shared memory conversions - Drop guest_memfd's .getattr() implementation as the VFS layer will call generic_fillattr() if inode_operations.getattr is NULL - Fix issues with dirty ring harvesting where KVM doesn't bound the processing of entries in any way, which allows userspace to keep KVM in a tight loop indefinitely - Kill off kvm_arch_{start,end}_assignment() and x86's associated tracking, now that KVM no longer uses assigned_device_count as a heuristic for either irqbypass usage or MDS mitigation Selftests: - Fix a comment typo - Verify KVM is loaded when getting any KVM module param so that attempting to run a selftest without kvm.ko loaded results in a SKIP message about KVM not being loaded/enabled (versus some random parameter not existing) - Skip tests that hit EACCES when attempting to access a file, and print a "Root required?" help message. In most cases, the test just needs to be run with elevated permissions" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (340 commits) Documentation: KVM: Use unordered list for pre-init VGIC registers RISC-V: KVM: Avoid re-acquiring memslot in kvm_riscv_gstage_map() RISC-V: KVM: Use find_vma_intersection() to search for intersecting VMAs RISC-V: perf/kvm: Add reporting of interrupt events RISC-V: KVM: Enable ring-based dirty memory tracking RISC-V: KVM: Fix inclusion of Smnpm in the guest ISA bitmap RISC-V: KVM: Delegate illegal instruction fault to VS mode RISC-V: KVM: Pass VMID as parameter to kvm_riscv_hfence_xyz() APIs RISC-V: KVM: Factor-out g-stage page table management RISC-V: KVM: Add vmid field to struct kvm_riscv_hfence RISC-V: KVM: Introduce struct kvm_gstage_mapping RISC-V: KVM: Factor-out MMU related declarations into separate headers RISC-V: KVM: Use ncsr_xyz() in kvm_riscv_vcpu_trap_redirect() RISC-V: KVM: Implement kvm_arch_flush_remote_tlbs_range() RISC-V: KVM: Don't flush TLB when PTE is unchanged RISC-V: KVM: Replace KVM_REQ_HFENCE_GVMA_VMID_ALL with KVM_REQ_TLB_FLUSH RISC-V: KVM: Rename and move kvm_riscv_local_tlb_sanitize() RISC-V: KVM: Drop the return value of kvm_riscv_vcpu_aia_init() RISC-V: KVM: Check kvm_riscv_vcpu_alloc_vector_context() return value KVM: arm64: selftests: Add FEAT_RAS EL2 registers to get-reg-list ... |
||
|
Li Nan
|
907a99c314 |
md: rename recovery_cp to resync_offset
'recovery_cp' was used to represent the progress of sync, but its name contains recovery, which can cause confusion. Replaces 'recovery_cp' with 'resync_offset' for clarity. Signed-off-by: Li Nan <linan122@huawei.com> Link: https://lore.kernel.org/linux-raid/20250722033340.1933388-1-linan666@huaweicloud.com Signed-off-by: Yu Kuai <yukuai3@huawei.com> |
||
|
Linus Torvalds
|
d9104cec3e |
bpf-next-6.17
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+soXsSLHKoYyzcli6rmadz2vbToFAmiINnEACgkQ6rmadz2v bToBnA/9F+A3R6rTwGk4HK3xpfc/nm2Tanl3oRN7S2ub/mskDOtWSIyG6cVFZ0UG 1fK6IkByyRIpAF/5qhdlw8drRXHkQtGLA0lP2L9llm4X1mHLofB18y9OeLrDE1WN KwNP06+IGX9W802lCGSIXOY+VmRscVfXSMokyQt2ilHplKjOnDqJcYkWupi3T2rC mz79FY9aEl2YrIcpj9RXz+8nwP49pZBuW2P0IM5PAIj4BJBXShrUp8T1nz94okNe NFsnAyRxjWpUT0McEgtA9WvpD9lZqujYD8Qp0KlGZWmI3vNpV5d9S1+dBcEb1n7q dyNMkTF3oRrJhhg4VqoHc6fVpzSEoZ9ZxV5Hx4cs+ganH75D4YbdGqx/7mR3DUgH MZh6rHF1pGnK7TAm7h5gl3ZRAOkZOaahbe1i01NKo9CEe5fSh3AqMyzJYoyGHRKi xDN39eQdWBNA+hm1VkbK2Bv93Rbjrka2Kj+D3sSSO9Bo/u3ntcknr7LW39idKz62 Q8dkKHcCEtun7gjk0YXPF013y81nEohj1C+52BmJ2l5JitM57xfr6YOaQpu7DPDE AJbHx6ASxKdyEETecd0b+cXUPQ349zmRXy0+CDMAGKpBicC0H0mHhL14cwOY1Hfu EIpIjmIJGI3JNF6T5kybcQGSBOYebdV0FFgwSllzPvuYt7YsHCs= =/O3j -----END PGP SIGNATURE----- Merge tag 'bpf-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Pull bpf updates from Alexei Starovoitov: - Remove usermode driver (UMD) framework (Thomas Weißschuh) - Introduce Strongly Connected Component (SCC) in the verifier to detect loops and refine register liveness (Eduard Zingerman) - Allow 'void *' cast using bpf_rdonly_cast() and corresponding '__arg_untrusted' for global function parameters (Eduard Zingerman) - Improve precision for BPF_ADD and BPF_SUB operations in the verifier (Harishankar Vishwanathan) - Teach the verifier that constant pointer to a map cannot be NULL (Ihor Solodrai) - Introduce BPF streams for error reporting of various conditions detected by BPF runtime (Kumar Kartikeya Dwivedi) - Teach the verifier to insert runtime speculation barrier (lfence on x86) to mitigate speculative execution instead of rejecting the programs (Luis Gerhorst) - Various improvements for 'veristat' (Mykyta Yatsenko) - For CONFIG_DEBUG_KERNEL config warn on internal verifier errors to improve bug detection by syzbot (Paul Chaignon) - Support BPF private stack on arm64 (Puranjay Mohan) - Introduce bpf_cgroup_read_xattr() kfunc to read xattr of cgroup's node (Song Liu) - Introduce kfuncs for read-only string opreations (Viktor Malik) - Implement show_fdinfo() for bpf_links (Tao Chen) - Reduce verifier's stack consumption (Yonghong Song) - Implement mprog API for cgroup-bpf programs (Yonghong Song) * tag 'bpf-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (192 commits) selftests/bpf: Migrate fexit_noreturns case into tracing_failure test suite selftests/bpf: Add selftest for attaching tracing programs to functions in deny list bpf: Add log for attaching tracing programs to functions in deny list bpf: Show precise rejected function when attaching fexit/fmod_ret to __noreturn functions bpf: Fix various typos in verifier.c comments bpf: Add third round of bounds deduction selftests/bpf: Test invariants on JSLT crossing sign selftests/bpf: Test cross-sign 64bits range refinement selftests/bpf: Update reg_bound range refinement logic bpf: Improve bounds when s64 crosses sign boundary bpf: Simplify bounds refinement from s32 selftests/bpf: Enable private stack tests for arm64 bpf, arm64: JIT support for private stack bpf: Move bpf_jit_get_prog_name() to core.c bpf, arm64: Fix fp initialization for exception boundary umd: Remove usermode driver framework bpf/preload: Don't select USERMODE_DRIVER selftests/bpf: Fix test dynptr/test_dynptr_memset_xdp_chunks failure selftests/bpf: Fix test dynptr/test_dynptr_copy_xdp failure selftests/bpf: Increase xdp data size for arm64 64K page size ... |
||
|
Linus Torvalds
|
8be4d31cb8 |
Networking changes for 6.17.
Core & protocols
----------------
- Wrap datapath globals into net_aligned_data, to avoid false sharing.
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container).
- Add SO_INQ and SCM_INQ support to AF_UNIX.
- Add SIOCINQ support to AF_VSOCK.
- Add TCP_MAXSEG sockopt to MPTCP.
- Add IPv6 force_forwarding sysctl to enable forwarding per interface.
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB.
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users.
- Convert TCP send queue handling from tasklet to BH workque.
- Improve BPF iteration over TCP sockets to see each socket exactly once.
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code.
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel NAPI
thread when threaded NAPI gets disabled. Previously thread would stick
around until ifdown due to tricky synchronization.
- Allow multicast routing to take effect on locally-generated packets.
- Add output interface argument for End.X in segment routing.
- MCTP: add support for gateway routing, improve bind() handling.
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink.
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed.
- Support NUD_PERMANENT for proxy neighbor entries.
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM.
- Add sequence numbers to netconsole messages. Unregister netconsole's
console when all net targets are removed. Code refactoring.
Add a number of selftests.
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup.
- Support inspecting ref_tracker state via DebugFS.
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links.
- Allow providing upcall pid for the 'execute' command in openvswitch.
- Remove DCCP support from Netfilter's conntrack.
- Disallow multiple packet duplications in the queuing layer.
- Prevent use of deprecated iptables code on PREEMPT_RT.
Driver API
----------
- Support RSS and hashing configuration over ethtool Netlink.
- Add dedicated ethtool callbacks for getting and setting hashing fields.
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc.
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs.
- Support traffic classes in devlink rate API for bandwidth management.
- Remove rtnl_lock dependency from UDP tunnel port configuration.
Device drivers
--------------
- Add a new Broadcom driver for 800G Ethernet (bnge).
- Add a standalone driver for Microchip ZL3073x DPLL.
- Remove IBM's NETIUCV device driver.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is used
by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=lqbe
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Wrap datapath globals into net_aligned_data, to avoid false sharing
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)
- Add SO_INQ and SCM_INQ support to AF_UNIX
- Add SIOCINQ support to AF_VSOCK
- Add TCP_MAXSEG sockopt to MPTCP
- Add IPv6 force_forwarding sysctl to enable forwarding per interface
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users
- Convert TCP send queue handling from tasklet to BH workque
- Improve BPF iteration over TCP sockets to see each socket exactly
once
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization
- Allow multicast routing to take effect on locally-generated packets
- Add output interface argument for End.X in segment routing
- MCTP: add support for gateway routing, improve bind() handling
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed
- Support NUD_PERMANENT for proxy neighbor entries
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM
- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup
- Support inspecting ref_tracker state via DebugFS
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links
- Allow providing upcall pid for the 'execute' command in openvswitch
- Remove DCCP support from Netfilter's conntrack
- Disallow multiple packet duplications in the queuing layer
- Prevent use of deprecated iptables code on PREEMPT_RT
Driver API:
- Support RSS and hashing configuration over ethtool Netlink
- Add dedicated ethtool callbacks for getting and setting hashing
fields
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs
- Support traffic classes in devlink rate API for bandwidth
management
- Remove rtnl_lock dependency from UDP tunnel port configuration
Device drivers:
- Add a new Broadcom driver for 800G Ethernet (bnge)
- Add a standalone driver for Microchip ZL3073x DPLL
- Remove IBM's NETIUCV device driver
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"
* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...
|
||
|
Norman Maurer
|
6f02527729 |
io_uring/net: Allow to do vectorized send
At the moment you have to use sendmsg for vectorized send. While this works it's suboptimal as it also means you need to allocate a struct msghdr that needs to be kept alive until a submission happens. We can remove this limitation by just allowing to use send directly. Signed-off-by: Norman Maurer <norman_maurer@apple.com> Link: https://lore.kernel.org/r/20250729065952.26646-1-norman_maurer@apple.com [axboe: remove -EINVAL return for SENDMSG and SEND_VECTORIZED] [axboe: allow send_zc to set SEND_VECTORIZED too] Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Linus Torvalds
|
6fb44438a5 |
arm64 updates for 6.17:
Perf and PMU updates:
- Add support for new (v3) Hisilicon SLLC and DDRC PMUs
- Add support for Arm-NI PMU integrations that share interrupts between
clock domains within a given instance
- Allow SPE to be configured with a lower sample period than the
minimum recommendation advertised by PMSIDR_EL1.Interval
- Add suppport for Arm's "Branch Record Buffer Extension" (BRBE)
- Adjust the perf watchdog period according to cpu frequency changes
- Minor driver fixes and cleanups
Hardware features:
- Support for MTE store-only checking (FEAT_MTE_STORE_ONLY)
- Support for reporting the non-address bits during a synchronous MTE
tag check fault (FEAT_MTE_TAGGED_FAR)
- Optimise the TLBI when folding/unfolding contiguous PTEs on hardware
with FEAT_BBM (break-before-make) level 2 and no TLB conflict aborts
Software features:
- Enable HAVE_LIVEPATCH after implementing arch_stack_walk_reliable()
and using the text-poke API for late module relocations
- Force VMAP_STACK always on and change arm64_efi_rt_init() to use
arch_alloc_vmap_stack() in order to avoid KASAN false positives
ACPI:
- Improve SPCR handling and messaging on systems lacking an SPCR table
Debug:
- Simplify the debug exception entry path
- Drop redundant DBG_MDSCR_* macros
Kselftests:
- Cleanups and improvements for SME, SVE and FPSIMD tests
Miscellaneous:
- Optimise loop to reduce redundant operations in contpte_ptep_get()
- Remove ISB when resetting POR_EL0 during signal handling
- Mark the kernel as tainted on SEA and SError panic
- Remove redundant gcs_free() call
-----BEGIN PGP SIGNATURE-----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=5h1C
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"A quick summary: perf support for Branch Record Buffer Extensions
(BRBE), typical PMU hardware updates, small additions to MTE for
store-only tag checking and exposing non-address bits to signal
handlers, HAVE_LIVEPATCH enabled on arm64, VMAP_STACK forced on.
There is also a TLBI optimisation on hardware that does not require
break-before-make when changing the user PTEs between contiguous and
non-contiguous.
More details:
Perf and PMU updates:
- Add support for new (v3) Hisilicon SLLC and DDRC PMUs
- Add support for Arm-NI PMU integrations that share interrupts
between clock domains within a given instance
- Allow SPE to be configured with a lower sample period than the
minimum recommendation advertised by PMSIDR_EL1.Interval
- Add suppport for Arm's "Branch Record Buffer Extension" (BRBE)
- Adjust the perf watchdog period according to cpu frequency changes
- Minor driver fixes and cleanups
Hardware features:
- Support for MTE store-only checking (FEAT_MTE_STORE_ONLY)
- Support for reporting the non-address bits during a synchronous MTE
tag check fault (FEAT_MTE_TAGGED_FAR)
- Optimise the TLBI when folding/unfolding contiguous PTEs on
hardware with FEAT_BBM (break-before-make) level 2 and no TLB
conflict aborts
Software features:
- Enable HAVE_LIVEPATCH after implementing arch_stack_walk_reliable()
and using the text-poke API for late module relocations
- Force VMAP_STACK always on and change arm64_efi_rt_init() to use
arch_alloc_vmap_stack() in order to avoid KASAN false positives
ACPI:
- Improve SPCR handling and messaging on systems lacking an SPCR
table
Debug:
- Simplify the debug exception entry path
- Drop redundant DBG_MDSCR_* macros
Kselftests:
- Cleanups and improvements for SME, SVE and FPSIMD tests
Miscellaneous:
- Optimise loop to reduce redundant operations in contpte_ptep_get()
- Remove ISB when resetting POR_EL0 during signal handling
- Mark the kernel as tainted on SEA and SError panic
- Remove redundant gcs_free() call"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (93 commits)
arm64/gcs: task_gcs_el0_enable() should use passed task
arm64: Kconfig: Keep selects somewhat alphabetically ordered
arm64: signal: Remove ISB when resetting POR_EL0
kselftest/arm64: Handle attempts to disable SM on SME only systems
kselftest/arm64: Fix SVE write data generation for SME only systems
kselftest/arm64: Test SME on SME only systems in fp-ptrace
kselftest/arm64: Test FPSIMD format data writes via NT_ARM_SVE in fp-ptrace
kselftest/arm64: Allow sve-ptrace to run on SME only systems
arm64/mm: Drop redundant addr increment in set_huge_pte_at()
kselftest/arm4: Provide local defines for AT_HWCAP3
arm64: Mark kernel as tainted on SAE and SError panic
arm64/gcs: Don't call gcs_free() when releasing task_struct
drivers/perf: hisi: Support PMUs with no interrupt
drivers/perf: hisi: Relax the event number check of v2 PMUs
drivers/perf: hisi: Add support for HiSilicon SLLC v3 PMU driver
drivers/perf: hisi: Use ACPI driver_data to retrieve SLLC PMU information
drivers/perf: hisi: Add support for HiSilicon DDRC v3 PMU driver
drivers/perf: hisi: Simplify the probe process for each DDRC version
perf/arm-ni: Support sharing IRQs within an NI instance
perf/arm-ni: Consolidate CPU affinity handling
...
|
||
|
Linus Torvalds
|
78bb43e51b |
Updates for the generic entry code:
- Split the code into syscall and exception/interrupt parts to ease the
conversion of ARM[64] to the generic entry infrastructure
- Extend syscall user dispatching to support a single intercepted range
instead of the default single non-intercepted range. That allows
monitoring/analysis of a specific executable range, e.g. a library, and
also provides flexibility for sandboxing scenarios.
- Cleanup and extend the user dispatch selftest
-----BEGIN PGP SIGNATURE-----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=yaCQ
-----END PGP SIGNATURE-----
Merge tag 'core-entry-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull generic entry code updates from Thomas Gleixner:
- Split the code into syscall and exception/interrupt parts to ease the
conversion of ARM[64] to the generic entry infrastructure
- Extend syscall user dispatching to support a single intercepted range
instead of the default single non-intercepted range. That allows
monitoring/analysis of a specific executable range, e.g. a library,
and also provides flexibility for sandboxing scenarios
- Cleanup and extend the user dispatch selftest
* tag 'core-entry-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry: Split generic entry into generic exception and syscall entry
selftests: Add tests for PR_SYS_DISPATCH_INCLUSIVE_ON
syscall_user_dispatch: Add PR_SYS_DISPATCH_INCLUSIVE_ON
selftests: Fix errno checking in syscall_user_dispatch test
|
||
|
Linus Torvalds
|
f38b1f243e |
Update for the futex subsystem:
- Switch the reference counting to a RCU based per-CPU reference to
address a performance bottleneck vs. the single instance rcuref
variant.
- Make the futex selftest build on 32-bit architectures which only
support 64-bit time_t, e.g. RISCV-32.
- Cleanups and improvements in selftests and futex bench
-----BEGIN PGP SIGNATURE-----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=WqFq
-----END PGP SIGNATURE-----
Merge tag 'locking-futex-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull futex updates from Thomas Gleixner:
- Switch the reference counting to a RCU based per-CPU reference to
address a performance bottleneck vs the single instance rcuref
variant
- Make the futex selftest build on 32-bit architectures which only
support 64-bit time_t, e.g. RISCV-32
- Cleanups and improvements in selftests and futex bench
* tag 'locking-futex-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/futex: Fix spelling mistake "Succeffuly" -> "Successfully"
selftests/futex: Define SYS_futex on 32-bit architectures with 64-bit time_t
perf bench futex: Remove support for IMMUTABLE
selftests/futex: Remove support for IMMUTABLE
futex: Remove support for IMMUTABLE
futex: Make futex_private_hash_get() static
futex: Use RCU-based per-CPU reference counting instead of rcuref_t
selftests/futex: Adapt the private hash test to RCU related changes
|
||
|
Linus Torvalds
|
02dc9d15d7 |
Updates for the timekeeping and VDSO code:
- Introduce support for auxiliary timekeepers
PTP clocks can be disconnected from the universal CLOCK_TAI reality
for various reasons including regularatory requirements for
functional safety redundancy.
The kernel so far only supports a single notion of time, which means
that all clocks are correlated in frequency and only differ by
offset to each other.
Access to non-correlated PTP clocks has been available so far only
through the file descriptor based "POSIX clock IDs", which are
subject to locking and have to go all the way out to the hardware.
The access is not only horribly slow, as it has to go all the way out
to the NIC/PTP hardware, but that also prevents the kernel to read
the time of such clocks e.g. from the network stack, where it is
required for TSN networking both on the transmit and receive side
unless the hardware provides offloading.
The auxiliary clocks provide a mechanism to support arbitrary clocks
which are not correlated to the system clock. This is not restricted
to the PTP use case on purpose as there is no kernel side association
of these clocks to a particular PTP device because that's a pure user
space configuration decision. Having them independent allows to
utilize them for other purposes and also enables them to be tested
without hardware dependencies.
To avoid pointless overhead these clocks have to be enabled
individualy via a new sysfs interface to reduce the overhead to a
single compare in the hotpath if they are enabled at the Kconfig
level at all.
These clocks utilize the existing timekeeping/NTP infrastructures,
which has been made possible over the recent releases by incrementaly
converting these infrastructures over from a single static instance
to a multi-instance pointer based implementation without any
performance regression reported.
The auxiliary clocks provide the same "emulation" of a "correct"
clock as the existing CLOCK_* variants do with an independent
instance of data and provide the same steering mechanism through the
existing sys_clock_adjtime() interface, which has been confirmed to
work by the chronyd(8) maintainer.
That allows to provide lockless kernel internal and VDSO support so
that applications and kernel internal functionalities can access
these clocks without restrictions and at the same performance as the
existing system clocks.
- Avoid double notifications in the adjtimex() syscall. Not a big issue,
but a trivial to avoid latency source.
-----BEGIN PGP SIGNATURE-----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=TTjt
-----END PGP SIGNATURE-----
Merge tag 'timers-ptp-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timekeeping and VDSO updates from Thomas Gleixner:
- Introduce support for auxiliary timekeepers
PTP clocks can be disconnected from the universal CLOCK_TAI reality
for various reasons including regularatory requirements for
functional safety redundancy.
The kernel so far only supports a single notion of time, which means
that all clocks are correlated in frequency and only differ by offset
to each other.
Access to non-correlated PTP clocks has been available so far only
through the file descriptor based "POSIX clock IDs", which are
subject to locking and have to go all the way out to the hardware.
The access is not only horribly slow, as it has to go all the way out
to the NIC/PTP hardware, but that also prevents the kernel to read
the time of such clocks e.g. from the network stack, where it is
required for TSN networking both on the transmit and receive side
unless the hardware provides offloading.
The auxiliary clocks provide a mechanism to support arbitrary clocks
which are not correlated to the system clock. This is not restricted
to the PTP use case on purpose as there is no kernel side association
of these clocks to a particular PTP device because that's a pure user
space configuration decision. Having them independent allows to
utilize them for other purposes and also enables them to be tested
without hardware dependencies.
To avoid pointless overhead these clocks have to be enabled
individualy via a new sysfs interface to reduce the overhead to a
single compare in the hotpath if they are enabled at the Kconfig
level at all.
These clocks utilize the existing timekeeping/NTP infrastructures,
which has been made possible over the recent releases by incrementaly
converting these infrastructures over from a single static instance
to a multi-instance pointer based implementation without any
performance regression reported.
The auxiliary clocks provide the same "emulation" of a "correct"
clock as the existing CLOCK_* variants do with an independent
instance of data and provide the same steering mechanism through the
existing sys_clock_adjtime() interface, which has been confirmed to
work by the chronyd(8) maintainer.
That allows to provide lockless kernel internal and VDSO support so
that applications and kernel internal functionalities can access
these clocks without restrictions and at the same performance as the
existing system clocks.
- Avoid double notifications in the adjtimex() syscall. Not a big
issue, but a trivial to avoid latency source.
* tag 'timers-ptp-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
vdso/gettimeofday: Add support for auxiliary clocks
vdso/vsyscall: Update auxiliary clock data in the datapage
vdso: Introduce aux_clock_resolution_ns()
vdso/gettimeofday: Introduce vdso_get_timestamp()
vdso/gettimeofday: Introduce vdso_set_timespec()
vdso/gettimeofday: Introduce vdso_clockid_valid()
vdso/gettimeofday: Return bool from clock_gettime() helpers
vdso/gettimeofday: Return bool from clock_getres() helpers
vdso/helpers: Add helpers for seqlocks of single vdso_clock
vdso/vsyscall: Split up __arch_update_vsyscall() into __arch_update_vdso_clock()
vdso/vsyscall: Introduce a helper to fill clock configurations
timekeeping: Remove the temporary CLOCK_AUX workaround
timekeeping: Provide ktime_get_clock_ts64()
timekeeping: Provide interface to control auxiliary clocks
timekeeping: Provide update for auxiliary timekeepers
timekeeping: Provide adjtimex() for auxiliary clocks
timekeeping: Prepare do_adtimex() for auxiliary clocks
timekeeping: Make do_adjtimex() reusable
timekeeping: Add auxiliary clock support to __timekeeping_inject_offset()
timekeeping: Make timekeeping_inject_offset() reusable
...
|