[ Upstream commit 3f6dae09fc ]
In fb_find_mode_cvt(), iff mode->refresh somehow happens to be 0x80000000,
cvt.f_refresh will become 0 when multiplying it by 2 due to overflow. It's
then passed to fb_cvt_hperiod(), where it's used as a divider -- division
by 0 will result in kernel oops. Add a sanity check for cvt.f_refresh to
avoid such overflow...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Fixes: 96fe6a2109 ("[PATCH] fbdev: Add VESA Coordinated Video Timings (CVT) support")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76d3ca8998 ]
I was wondering why there's garbage at the bottom of the screen when
tile blitting is used with an odd mode like 1080, 600 or 200. Sure there's
only space for half a tile but the same area is clean when the buffer
is bitmap.
Then later I found that it's supposed to be cleaned but that's not
implemented. So I took what's in bitblit and adapted it for tileblit.
This implementation was tested for both the horizontal and vertical case,
and now does the same as what's done for bitmap buffers.
If anyone is interested to reproduce the problem then I could bet that'd
be on a S3 or Ark. Just set up a mode with an odd line count and make
sure that the virtual size covers the complete tile at the bottom. E.g.
for 600 lines that's 608 virtual lines for a 16 tall tile. Then the
bottom area should be cleaned.
For the right side it's more difficult as there the drivers won't let an
odd size happen, unless the code is modified. But once it reports back a
few pixel columns short then fbcon won't use the last column. With the
patch that column is now clean.
Btw. the virtual size should be rounded up by the driver for both axes
(not only the horizontal) so that it's dividable by the tile size.
That's a driver bug but correcting it is not in scope for this patch.
Implement missing margin clearing for tileblit
Signed-off-by: Zsolt Kajtar <soci@c64.rulez.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 892c788d73 ]
The erase colour calculation for fbcon clearing should use get_color instead
of attr_col_ec, like everything else. The latter is similar but is not correct.
For example it's missing the depth dependent remapping and doesn't care about
blanking.
The problem can be reproduced by setting up the background colour to grey
(vt.color=0x70) and having an fbcon console set to 2bpp (4 shades of gray).
Now the background attribute should be 1 (dark gray) on the console.
If the screen is scrolled when pressing enter in a shell prompt at the bottom
line then the new line is cleared using colour 7 instead of 1. That's not
something fillrect likes (at 2bbp it expect 0-3) so the result is interesting.
This patch switches to get_color with vc_video_erase_char to determine the
erase colour from attr_col_ec. That makes the latter function redundant as
no other users were left.
Use correct erase colour for clearing in fbcon
Signed-off-by: Zsolt Kajtar <soci@c64.rulez.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e411827f3 ]
Function dispc_ovl_setup is not intended to work with the value OMAP_DSS_WB
of the enum parameter plane.
The value of this parameter is initialized in dss_init_overlays and in the
current state of the code it cannot take this value so it's not a real
problem.
For the purposes of defensive coding it wouldn't be superfluous to check
the parameter value, because some functions down the call stack process
this value correctly and some not.
For example, in dispc_ovl_setup_global_alpha it may lead to buffer
overflow.
Add check for this value.
Found by Linux Verification Center (linuxtesting.org) with SVACE static
analysis tool.
Signed-off-by: Leonid Arapov <arapovl839@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aee50bd88e ]
Added checks for xoffset, yoffset settings.
Incorrect settings of these parameters can lead to errors
in sm501fb_pan_ functions.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 5fc404e47b ("[PATCH] fb: SM501 framebuffer driver")
Signed-off-by: Danila Chernetsov <listdansp@mail.ru>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2df2c0caae ]
The address of a data structure member was determined before
a corresponding null pointer check in the implementation of
the function “au1100fb_setmode”.
This issue was detected by using the Coccinelle software.
Fixes: 3b495f2bb7 ("Au1100 FB driver uplift for 2.6.")
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7241c886a7 ]
When a Hyper-V framebuffer device is removed, or the driver is unbound
from a device, any allocated and/or mapped memory must be released. In
particular, MMIO address space that was mapped to the framebuffer must
be unmapped. Current code unmaps the wrong address, resulting in an
error like:
[ 4093.980597] iounmap: bad address 00000000c936c05c
followed by a stack dump.
Commit d21987d709 ("video: hyperv: hyperv_fb: Support deferred IO for
Hyper-V frame buffer driver") changed the kind of address stored in
info->screen_base, and the iounmap() call in hvfb_putmem() was not
updated accordingly.
Fix this by updating hvfb_putmem() to unmap the correct address.
Fixes: d21987d709 ("video: hyperv: hyperv_fb: Support deferred IO for Hyper-V frame buffer driver")
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250209235252.2987-1-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250209235252.2987-1-mhklinux@outlook.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4b6b665df ]
When using touchscreen and framebuffer, Nokia 770 crashes easily with:
BUG: scheduling while atomic: irq/144-ads7846/82/0x00010000
Modules linked in: usb_f_ecm g_ether usb_f_rndis u_ether libcomposite configfs omap_udc ohci_omap ohci_hcd
CPU: 0 UID: 0 PID: 82 Comm: irq/144-ads7846 Not tainted 6.12.7-770 #2
Hardware name: Nokia 770
Call trace:
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x54/0x5c
dump_stack_lvl from __schedule_bug+0x50/0x70
__schedule_bug from __schedule+0x4d4/0x5bc
__schedule from schedule+0x34/0xa0
schedule from schedule_preempt_disabled+0xc/0x10
schedule_preempt_disabled from __mutex_lock.constprop.0+0x218/0x3b4
__mutex_lock.constprop.0 from clk_prepare_lock+0x38/0xe4
clk_prepare_lock from clk_set_rate+0x18/0x154
clk_set_rate from sossi_read_data+0x4c/0x168
sossi_read_data from hwa742_read_reg+0x5c/0x8c
hwa742_read_reg from send_frame_handler+0xfc/0x300
send_frame_handler from process_pending_requests+0x74/0xd0
process_pending_requests from lcd_dma_irq_handler+0x50/0x74
lcd_dma_irq_handler from __handle_irq_event_percpu+0x44/0x130
__handle_irq_event_percpu from handle_irq_event+0x28/0x68
handle_irq_event from handle_level_irq+0x9c/0x170
handle_level_irq from generic_handle_domain_irq+0x2c/0x3c
generic_handle_domain_irq from omap1_handle_irq+0x40/0x8c
omap1_handle_irq from generic_handle_arch_irq+0x28/0x3c
generic_handle_arch_irq from call_with_stack+0x1c/0x24
call_with_stack from __irq_svc+0x94/0xa8
Exception stack(0xc5255da0 to 0xc5255de8)
5da0: 00000001 c22fc620 00000000 00000000 c08384a8 c106fc00 00000000 c240c248
5dc0: c113a600 c3f6ec30 00000001 00000000 c22fc620 c5255df0 c22fc620 c0279a94
5de0: 60000013 ffffffff
__irq_svc from clk_prepare_lock+0x4c/0xe4
clk_prepare_lock from clk_get_rate+0x10/0x74
clk_get_rate from uwire_setup_transfer+0x40/0x180
uwire_setup_transfer from spi_bitbang_transfer_one+0x2c/0x9c
spi_bitbang_transfer_one from spi_transfer_one_message+0x2d0/0x664
spi_transfer_one_message from __spi_pump_transfer_message+0x29c/0x498
__spi_pump_transfer_message from __spi_sync+0x1f8/0x2e8
__spi_sync from spi_sync+0x24/0x40
spi_sync from ads7846_halfd_read_state+0x5c/0x1c0
ads7846_halfd_read_state from ads7846_irq+0x58/0x348
ads7846_irq from irq_thread_fn+0x1c/0x78
irq_thread_fn from irq_thread+0x120/0x228
irq_thread from kthread+0xc8/0xe8
kthread from ret_from_fork+0x14/0x28
As a quick fix, switch to a threaded IRQ which provides a stable system.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de124b61e1 ]
dss_of_port_get_parent_device() leaks an OF node reference when i >= 2
and struct device_node *np is present. Since of_get_next_parent()
obtains a reference of the returned OF node, call of_node_put() before
returning NULL.
This was found by an experimental verifier that I am developing, and no
runtime test was able to be performed due to that lack of actual
devices.
Fixes: f76ee892a9 ("omapfb: copy omapdss & displays for omapfb")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9cf14f5a27 ]
The values of the variables xres and yres are placed in strbuf.
These variables are obtained from strbuf1.
The strbuf1 array contains digit characters
and a space if the array contains non-digit characters.
Then, when executing sprintf(strbuf, "%ux%ux8", xres, yres);
more than 16 bytes will be written to strbuf.
It is suggested to increase the size of the strbuf array to 24.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Andrey Shumilin <shum.sdl@nppct.ru>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a6921095e ]
In the pxafb_probe function, it calls the pxafb_init_fbinfo function,
after which &fbi->task is associated with pxafb_task. Moreover,
within this pxafb_init_fbinfo function, the pxafb_blank function
within the &pxafb_ops struct is capable of scheduling work.
If we remove the module which will call pxafb_remove to make cleanup,
it will call unregister_framebuffer function which can call
do_unregister_framebuffer to free fbi->fb through
put_fb_info(fb_info), while the work mentioned above will be used.
The sequence of operations that may lead to a UAF bug is as follows:
CPU0 CPU1
| pxafb_task
pxafb_remove |
unregister_framebuffer(info) |
do_unregister_framebuffer(fb_info) |
put_fb_info(fb_info) |
// free fbi->fb | set_ctrlr_state(fbi, state)
| __pxafb_lcd_power(fbi, 0)
| fbi->lcd_power(on, &fbi->fb.var)
| //use fbi->fb
Fix it by ensuring that the work is canceled before proceeding
with the cleanup in pxafb_remove.
Note that only root user can remove the driver at runtime.
Signed-off-by: Kaixin Wang <kxwang23@m.fudan.edu.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95cdd538e0 ]
The driver core can register and cleanup sysfs groups already.
Make use of that functionality to simplify the error handling and
cleanup.
Also avoid a UAF race during unregistering where the sysctl attributes
were usable after the info struct was freed.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa578e8975 ]
If an error occurs after request_mem_region(), a corresponding
release_mem_region() should be called, as already done in the remove
function.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2bc958b2b ]
Test the vesa_attributes field in struct screen_info for compatibility
with VGA hardware. Vesafb currently tests bit 1 in screen_info's
capabilities field which indicates a 64-bit lfb address and is
unrelated to VGA compatibility.
Section 4.4 of the Vesa VBE 2.0 specifications defines that bit 5 in
the mode's attributes field signals VGA compatibility. The mode is
compatible with VGA hardware if the bit is clear. In that case, the
driver can access VGA state of the VBE's underlying hardware. The
vesafb driver uses this feature to program the color LUT in palette
modes. Without, colors might be incorrect.
The problem got introduced in commit 89ec4c238e ("[PATCH] vesafb: Fix
incorrect logo colors in x86_64"). It incorrectly stores the mode
attributes in the screen_info's capabilities field and updates vesafb
accordingly. Later, commit 5e8ddcbe86 ("Video mode probing support for
the new x86 setup code") fixed the screen_info, but did not update vesafb.
Color output still tends to work, because bit 1 in capabilities is
usually 0.
Besides fixing the bug in vesafb, this commit introduces a helper that
reads the correct bit from screen_info.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 5e8ddcbe86 ("Video mode probing support for the new x86 setup code")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Cc: <stable@vger.kernel.org> # v2.6.23+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6ad959b670 upstream.
The commit 04e5eac8f3ab("fbdev: savage: Error out if pixclock equals zero")
checks the value of pixclock to avoid divide-by-zero error. However
the function savagefb_probe doesn't handle the error return of
savagefb_check_var. When pixclock is 0, it will cause divide-by-zero error.
Fixes: 04e5eac8f3 ("fbdev: savage: Error out if pixclock equals zero")
Signed-off-by: Cai Xinchen <caixinchen1@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c748a6d77c ]
In order to introduce a pwm api which can be used from atomic context,
we will need two functions for applying pwm changes:
int pwm_apply_might_sleep(struct pwm *, struct pwm_state *);
int pwm_apply_atomic(struct pwm *, struct pwm_state *);
This commit just deals with renaming pwm_apply_state(), a following
commit will introduce the pwm_apply_atomic() function.
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Stable-dep-of: 974afccd37 ("leds: pwm: Disable PWM when going to suspend")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 688cf59866 ]
Building with W=1 shows that a couple of variables in this driver are only
used in certain configurations:
drivers/video/fbdev/sis/init301.c:239:28: error: 'SiS_Part2CLVX_6' defined but not used [-Werror=unused-const-variable=]
239 | static const unsigned char SiS_Part2CLVX_6[] = { /* 1080i */
| ^~~~~~~~~~~~~~~
drivers/video/fbdev/sis/init301.c:230:28: error: 'SiS_Part2CLVX_5' defined but not used [-Werror=unused-const-variable=]
230 | static const unsigned char SiS_Part2CLVX_5[] = { /* 750p */
| ^~~~~~~~~~~~~~~
drivers/video/fbdev/sis/init301.c:211:28: error: 'SiS_Part2CLVX_4' defined but not used [-Werror=unused-const-variable=]
211 | static const unsigned char SiS_Part2CLVX_4[] = { /* PAL */
| ^~~~~~~~~~~~~~~
drivers/video/fbdev/sis/init301.c:192:28: error: 'SiS_Part2CLVX_3' defined but not used [-Werror=unused-const-variable=]
192 | static const unsigned char SiS_Part2CLVX_3[] = { /* NTSC, 525i, 525p */
| ^~~~~~~~~~~~~~~
drivers/video/fbdev/sis/init301.c:184:28: error: 'SiS_Part2CLVX_2' defined but not used [-Werror=unused-const-variable=]
184 | static const unsigned char SiS_Part2CLVX_2[] = {
| ^~~~~~~~~~~~~~~
drivers/video/fbdev/sis/init301.c:176:28: error: 'SiS_Part2CLVX_1' defined but not used [-Werror=unused-const-variable=]
176 | static const unsigned char SiS_Part2CLVX_1[] = {
| ^~~~~~~~~~~~~~~
This started showing up after the definitions were moved into the
source file from the header, which was not flagged by the compiler.
Move the definition into the appropriate #ifdef block that already
exists next to them.
Fixes: 5908986ef3 ("video: fbdev: sis: avoid mismatched prototypes")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26c8cfb9d1 ]
The name of the overlay does not fit into the fixed-length field:
drivers/video/fbdev/sh_mobile_lcdcfb.c:1577:2: error: 'snprintf' will always be truncated; specified size is 16, but format string expands to at least 25
Make it short enough by changing the string.
Fixes: c5deac3c9b ("fbdev: sh_mobile_lcdc: Implement overlays support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01c0cce88c ]
Commit 95da53d63d ("drm/omapdrm: Use regular fbdev I/O helpers")
stopped console from updating for command mode displays because there is
no damage handling in fb_sys_write() unlike we had earlier in
drm_fb_helper_sys_write().
Let's fix the issue by adding FB_GEN_DEFAULT_DEFERRED_DMAMEM_OPS and
FB_DMAMEM_HELPERS_DEFERRED as suggested by Thomas. We cannot use the
FB_DEFAULT_DEFERRED_OPS as fb_deferred_io_mmap() won't work properly
for write-combine.
Fixes: 95da53d63d ("drm/omapdrm: Use regular fbdev I/O helpers")
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240228063540.4444-3-tony@atomide.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 78d9161d2b upstream.
With deferred IO enabled, a page fault happens when data is written to the
framebuffer device. Then driver determines which page is being updated by
calculating the offset of the written virtual address within the virtual
memory area, and uses this offset to get the updated page within the
internal buffer. This page is later copied to hardware (thus the name
"deferred IO").
This offset calculation is only correct if the virtual memory area is
mapped to the beginning of the internal buffer. Otherwise this is wrong.
For example, if users do:
mmap(ptr, 4096, PROT_WRITE, MAP_FIXED | MAP_SHARED, fd, 0xff000);
Then the virtual memory area will mapped at offset 0xff000 within the
internal buffer. This offset 0xff000 is not accounted for, and wrong page
is updated.
Correct the calculation by using vmf->pgoff instead. With this change, the
variable "offset" will no longer hold the exact offset value, but it is
rounded down to multiples of PAGE_SIZE. But this is still correct, because
this variable is only used to calculate the page offset.
Reported-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Closes: https://lore.kernel.org/linux-fbdev/271372d6-e665-4e7f-b088-dee5f4ab341a@oracle.com
Fixes: 56c134f7f1 ("fbdev: Track deferred-I/O pages in pageref struct")
Cc: <stable@vger.kernel.org>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240423115053.4490-1-namcao@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c2d953276b ]
The expression htotal * vtotal can have a zero value on
overflow. It is necessary to prevent division by zero like in
fb_var_to_videomode().
Found by Linux Verification Center (linuxtesting.org) with Svace.
Signed-off-by: Roman Smirnov <r.smirnov@omp.ru>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc87bb342f ]
There are some actions with value 'tmp' but 'dst_addr' is checked instead.
It is obvious that a copy-paste error was made here and the value
of variable 'tmp' should be checked here.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Aleksandr Burakov <a.burakov@rosalinux.ru>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00d6a284fc ]
Commit a5a923038d (fbdev: fbcon: Properly revert changes when
vc_resize() failed) started restoring old font data upon failure (of
vc_resize()). But it performs so only for user fonts. It means that the
"system"/internal fonts are not restored at all. So in result, the very
first call to fbcon_do_set_font() performs no restore at all upon
failing vc_resize().
This can be reproduced by Syzkaller to crash the system on the next
invocation of font_get(). It's rather hard to hit the allocation failure
in vc_resize() on the first font_set(), but not impossible. Esp. if
fault injection is used to aid the execution/failure. It was
demonstrated by Sirius:
BUG: unable to handle page fault for address: fffffffffffffff8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD cb7b067 P4D cb7b067 PUD cb7d067 PMD 0
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 8007 Comm: poc Not tainted 6.7.0-g9d1694dc91ce #20
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:fbcon_get_font+0x229/0x800 drivers/video/fbdev/core/fbcon.c:2286
Call Trace:
<TASK>
con_font_get drivers/tty/vt/vt.c:4558 [inline]
con_font_op+0x1fc/0xf20 drivers/tty/vt/vt.c:4673
vt_k_ioctl drivers/tty/vt/vt_ioctl.c:474 [inline]
vt_ioctl+0x632/0x2ec0 drivers/tty/vt/vt_ioctl.c:752
tty_ioctl+0x6f8/0x1570 drivers/tty/tty_io.c:2803
vfs_ioctl fs/ioctl.c:51 [inline]
...
So restore the font data in any case, not only for user fonts. Note the
later 'if' is now protected by 'old_userfont' and not 'old_data' as the
latter is always set now. (And it is supposed to be non-NULL. Otherwise
we would see the bug above again.)
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Fixes: a5a923038d ("fbdev: fbcon: Properly revert changes when vc_resize() failed")
Reported-and-tested-by: Ubisectech Sirius <bugreport@ubisectech.com>
Cc: Ubisectech Sirius <bugreport@ubisectech.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240208114411.14604-1-jirislaby@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e421946be7 ]
The userspace program could pass any values to the driver through
ioctl() interface. If the driver doesn't check the value of pixclock,
it may cause divide-by-zero error.
In sisfb_check_var(), var->pixclock is used as a divisor to caculate
drate before it is checked against zero. Fix this by checking it
at the beginning.
This is similar to CVE-2022-3061 in i740fb which was fixed by
commit 15cf0b8.
Signed-off-by: Fullway Wang <fullwaywang@outlook.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 04e5eac8f3 ]
The userspace program could pass any values to the driver through
ioctl() interface. If the driver doesn't check the value of pixclock,
it may cause divide-by-zero error.
Although pixclock is checked in savagefb_decode_var(), but it is not
checked properly in savagefb_probe(). Fix this by checking whether
pixclock is zero in the function savagefb_check_var() before
info->var.pixclock is used as the divisor.
This is similar to CVE-2022-3061 in i740fb which was fixed by
commit 15cf0b8.
Signed-off-by: Fullway Wang <fullwaywang@outlook.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 33cd6ea9c0 upstream.
When framebuffer gets closed, the queued deferred IO gets cancelled. This
can cause some last display data to vanish. This is problematic for users
who send a still image to the framebuffer, then close the file: the image
may never appear.
To ensure none of display data get lost, flush the queued deferred IO
first before closing.
Another possible solution is to delete the cancel_delayed_work_sync()
instead. The difference is that the display may appear some time after
closing. However, the clearing of page mapping after this needs to be
removed too, because the page mapping is used by the deferred work. It is
not completely obvious whether it is okay to not clear the page mapping.
For a patch intended for stable trees, go with the simple and obvious
solution.
Fixes: 60b59beafb ("fbdev: mm: Deferred IO support")
Cc: stable@vger.kernel.org
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 15e4c1f462 upstream.
The driver's fsync() is supposed to flush any pending operation to
hardware. It is implemented in this driver by cancelling the queued
deferred IO first, then schedule it for "immediate execution" by calling
schedule_delayed_work() again with delay=0. However, setting delay=0
only means the work is scheduled immediately, it does not mean the work
is executed immediately. There is no guarantee that the work is finished
after schedule_delayed_work() returns. After this driver's fsync()
returns, there can still be pending work. Furthermore, if close() is
called by users immediately after fsync(), the pending work gets
cancelled and fsync() may do nothing.
To ensure that the deferred IO completes, use flush_delayed_work()
instead. Write operations to this driver either write to the device
directly, or invoke schedule_delayed_work(); so by flushing the
workqueue, it can be guaranteed that all previous writes make it to the
device.
Fixes: 5e841b88d2 ("fb: fsync() method for deferred I/O flush.")
Cc: stable@vger.kernel.org
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5758844105 ]
The previous setting did not take into account the CSTN mode.
For the H_WAIT_2 bitfield (bits 0-7) of the LCDC Horizontal Configuration
Register (LCDCR), the IMX25RM manual states that:
In TFT mode, it specifies the number of SCLK periods between the end of
HSYNC and the beginning of OE signal, and the total delay time equals
(H_WAIT_2 + 3) of SCLK periods.
In CSTN mode, it specifies the number of SCLK periods between the end of
HSYNC and the first display data in each line, and the total delay time
equals (H_WAIT_2 + 2) of SCLK periods.
The patch handles both cases.
Fixes: 4e47382fbc ("fbdev: imxfb: warn about invalid left/right margin")
Fixes: 7e8549bcee ("imxfb: Fix margin settings")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5035c8184 ]
wr_reg_wa() is not an appropriate name for a global function, and doesn't need
to be global anyway, so mark it static and avoid the warning:
drivers/video/fbdev/fsl-diu-fb.c:493:6: error: no previous prototype for 'wr_reg_wa' [-Werror=missing-prototypes]
Fixes: 0d9dab39fb ("powerpc/5121: fsl-diu-fb: fix issue with re-enabling DIU area descriptor")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aba6ab57a9 ]
I've re-written the error handling but the bug is that if init_imstt()
fails we need to call iounmap(par->cmap_regs).
Fixes: c75f5a5506 ("fbdev: imsttfb: Fix use after free bug in imsttfb_probe")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e08c30efda ]
The init_imstt() function calls framebuffer_release() on error and then
the probe() function calls it again. It should only be done in probe.
Fixes: 518ecb6a20 ("fbdev: imsttfb: Fix error path of imsttfb_probe()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pull fbdev fixes and cleanups from Helge Deller:
"Various minor fixes, cleanups and annotations for atyfb, sa1100fb,
omapfb, uvesafb and mmp"
* tag 'fbdev-for-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: core: syscopyarea: fix sloppy typing
fbdev: core: cfbcopyarea: fix sloppy typing
fbdev: uvesafb: Call cn_del_callback() at the end of uvesafb_exit()
fbdev: uvesafb: Remove uvesafb_exec() prototype from include/video/uvesafb.h
fbdev: sa1100fb: mark sa1100fb_init() static
fbdev: omapfb: fix some error codes
fbdev: atyfb: only use ioremap_uc() on i386 and ia64
fbdev: mmp: Annotate struct mmp_path with __counted_by
fbdev: mmp: Annotate struct mmphw_ctrl with __counted_by
In sys_copyarea(), the local variable bits_per_line is needlessly typed as
*unsigned long* -- which is a 32-bit type on the 32-bit arches and a 64-bit
type on the 64-bit arches; that variable's value is derived from the __u32
typed fb_fix_screeninfo::line_length field (multiplied by 8u) and a 32-bit
*unsigned int* type should still be enough to store the # of bits per line.
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Helge Deller <deller@gmx.de>
In cfb_copyarea(), the local variable bits_per_line is needlessly typed as
*unsigned long* -- which is a 32-bit type on the 32-bit arches and a 64-bit
type on the 64-bit arches; that variable's value is derived from the __u32
typed fb_fix_screeninfo::line_length field (multiplied by 8u) and a 32-bit
*unsigned int* type should still be enough to store the # of bits per line.
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Helge Deller <deller@gmx.de>
Delete the v86d netlink only after all the VBE tasks have been
completed.
Fixes initial state restore on module unload:
uvesafb: VBE state restore call failed (eax=0x4f04, err=-19)
Signed-off-by: Jorge Maidana <jorgem.linux@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
This is a global function that is only referenced as an initcall. This causes
a warning:
drivers/video/fbdev/sa1100fb.c:1218:12: error: no previous prototype for 'sa1100fb_init' [-Werror=missing-prototypes]
Make it static instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>
ioremap_uc() is only meaningful on old x86-32 systems with the PAT
extension, and on ia64 with its slightly unconventional ioremap()
behavior, everywhere else this is the same as ioremap() anyway.
Change the only driver that still references ioremap_uc() to only do so
on x86-32/ia64 in order to allow removing that interface at some
point in the future for the other architectures.
On some architectures, ioremap_uc() just returns NULL, changing
the driver to call ioremap() means that they now have a chance
of working correctly.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Helge Deller <deller@gmx.de>
Fix linker error if FB=m about missing fb_io_read and fb_io_write. The
linker's error message suggests that this config setting has already
been broken for other symbols.
All errors (new ones prefixed by >>):
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o: in function `sh7760fb_probe':
sh7760fb.c:(.text+0x374): undefined reference to `framebuffer_alloc'
sh4-linux-ld: sh7760fb.c:(.text+0x394): undefined reference to `fb_videomode_to_var'
sh4-linux-ld: sh7760fb.c:(.text+0x39c): undefined reference to `fb_alloc_cmap'
sh4-linux-ld: sh7760fb.c:(.text+0x3a4): undefined reference to `register_framebuffer'
sh4-linux-ld: sh7760fb.c:(.text+0x3ac): undefined reference to `fb_dealloc_cmap'
sh4-linux-ld: sh7760fb.c:(.text+0x434): undefined reference to `framebuffer_release'
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o: in function `sh7760fb_remove':
sh7760fb.c:(.text+0x800): undefined reference to `unregister_framebuffer'
sh4-linux-ld: sh7760fb.c:(.text+0x804): undefined reference to `fb_dealloc_cmap'
sh4-linux-ld: sh7760fb.c:(.text+0x814): undefined reference to `framebuffer_release'
>> sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0xc): undefined reference to `fb_io_read'
>> sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x10): undefined reference to `fb_io_write'
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x2c): undefined reference to `cfb_fillrect'
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x30): undefined reference to `cfb_copyarea'
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x34): undefined reference to `cfb_imageblit'
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309130632.LS04CPWu-lkp@intel.com/
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230918090400.13264-1-tzimmermann@suse.de
As a result of the recent Kconfig reworks, the default settings for the
framebuffer interfaces changed in unexpected ways:
Configurations that leave CONFIG_FB disabled but use DRM now get
DRM_FBDEV_EMULATION by default. This also turns on the deprecated /dev/fb
device nodes for machines that don't actually want it.
In turn, configurations that previously had DRM_FBDEV_EMULATION enabled
now only get the /dev/fb front-end but not the more useful framebuffer
console, which is not selected any more.
We had previously decided that any combination of the three frontends
(FB_DEVICE, FRAMEBUFFER_CONSOLE and LOGO) should be selectable, but the
new default settings mean that a lot of defconfig files would have to
get adapted.
Change the defaults back to what they were in Linux 6.5:
- Leave DRM_FBDEV_EMULATION turned off unless CONFIG_FB
is enabled. Previously this was a hard dependency but now the two are
independent. However, configurations that enable CONFIG_FB probably
also want to keep the emulation for DRM, while those without FB
presumably did that intentionally in the past.
- Leave FB_DEVICE turned off for FB=n. Following the same
logic, the deprecated option should not automatically get enabled
here, most users that had FB turned off in the past do not want it,
even if they want the console
- Turn the FRAMEBUFFER_CONSOLE option on if
DRM_FBDEV_EMULATION is set to avoid having to change defconfig
files that relied on it being selected unconditionally in the past.
This also makes sense since both LOGO and FB_DEVICE are now disabled
by default for builds without CONFIG_FB, but DRM_FBDEV_EMULATION
would make no sense if all three are disabled.
Fixes: a5ae331edb ("drm: Drop select FRAMEBUFFER_CONSOLE for DRM_FBDEV_EMULATION")
Fixes: 701d2054fa ("fbdev: Make support for userspace interfaces configurable")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230911205338.2385278-1-arnd@kernel.org
The .need_pwm and .need_chargepump fields in struct ssd1307fb_deviceinfo
are flags that can have only two possible values: 0 and 1.
Reduce kernel size by changing their types from int to bool.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Sergey Shtylyov