Changes in 5.10.177
interconnect: qcom: osm-l3: fix icc_onecell_data allocation
perf/core: Fix perf_output_begin parameter is incorrectly invoked in perf_event_bpf_output
perf: fix perf_event_context->time
ipmi:ssif: make ssif_i2c_send() void
ipmi:ssif: Increase the message retry time
ipmi:ssif: resend_msg() cannot fail
ipmi:ssif: Add a timer between request retries
KVM: Clean up benign vcpu->cpu data races when kicking vCPUs
KVM: KVM: Use cpumask_available() to check for NULL cpumask when kicking vCPUs
KVM: Optimize kvm_make_vcpus_request_mask() a bit
KVM: Pre-allocate cpumasks for kvm_make_all_cpus_request_except()
KVM: Register /dev/kvm as the _very_ last thing during initialization
serial: fsl_lpuart: Fix comment typo
tty: serial: fsl_lpuart: fix race on RX DMA shutdown
serial: 8250: SERIAL_8250_ASPEED_VUART should depend on ARCH_ASPEED
serial: 8250: ASPEED_VUART: select REGMAP instead of depending on it
drm/sun4i: fix missing component unbind on bind errors
net: tls: fix possible race condition between do_tls_getsockopt_conf() and do_tls_setsockopt_conf()
power: supply: bq24190_charger: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
power: supply: bq24190: Fix use after free bug in bq24190_remove due to race condition
power: supply: da9150: Fix use after free bug in da9150_charger_remove due to race condition
ARM: dts: imx6sll: e60k02: fix usbotg1 pinctrl
ARM: dts: imx6sl: tolino-shine2hd: fix usbotg1 pinctrl
xsk: Add missing overflow check in xdp_umem_reg
iavf: fix inverted Rx hash condition leading to disabled hash
iavf: fix non-tunneled IPv6 UDP packet type and hashing
intel/igbvf: free irq on the error path in igbvf_request_msix()
igbvf: Regard vf reset nack as success
igc: fix the validation logic for taprio's gate list
i2c: imx-lpi2c: check only for enabled interrupt flags
scsi: scsi_dh_alua: Fix memleak for 'qdata' in alua_activate()
net: usb: smsc95xx: Limit packet length to skb->len
qed/qed_sriov: guard against NULL derefs from qed_iov_get_vf_info
xirc2ps_cs: Fix use after free bug in xirc2ps_detach
net: phy: Ensure state transitions are processed from phy_stop()
net: mdio: fix owner field for mdio buses registered using device-tree
net: qcom/emac: Fix use after free bug in emac_remove due to race condition
net/ps3_gelic_net: Fix RX sk_buff length
net/ps3_gelic_net: Use dma_mapping_error
bootconfig: Fix testcase to increase max node
keys: Do not cache key in task struct if key is requested from kernel thread
bpf: Adjust insufficient default bpf_jit_limit
net/mlx5: Fix steering rules cleanup
net/mlx5: Read the TC mapping of all priorities on ETS query
net/mlx5: E-Switch, Fix an Oops in error handling code
atm: idt77252: fix kmemleak when rmmod idt77252
erspan: do not use skb_mac_header() in ndo_start_xmit()
net/sonic: use dma_mapping_error() for error check
nvme-tcp: fix nvme_tcp_term_pdu to match spec
gve: Cache link_speed value from device
net: mdio: thunder: Add missing fwnode_handle_put()
Bluetooth: btqcomsmd: Fix command timeout after setting BD address
Bluetooth: L2CAP: Fix not checking for maximum number of DCID
Bluetooth: L2CAP: Fix responding with wrong PDU type
Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work
platform/chrome: cros_ec_chardev: fix kernel data leak from ioctl
hwmon: fix potential sensor registration fail if of_node is missing
hwmon (it87): Fix voltage scaling for chips with 10.9mV ADCs
scsi: qla2xxx: Perform lockless command completion in abort path
uas: Add US_FL_NO_REPORT_OPCODES for JMicron JMS583Gen 2
thunderbolt: Use scale field when allocating USB3 bandwidth
thunderbolt: Use const qualifier for `ring_interrupt_index`
riscv: Bump COMMAND_LINE_SIZE value to 1024
HID: cp2112: Fix driver not registering GPIO IRQ chip as threaded
ca8210: fix mac_len negative array access
m68k: Only force 030 bus error if PC not in exception table
selftests/bpf: check that modifier resolves after pointer
scsi: target: iscsi: Fix an error message in iscsi_check_key()
scsi: hisi_sas: Check devm_add_action() return value
scsi: ufs: core: Add soft dependency on governor_simpleondemand
scsi: lpfc: Avoid usage of list iterator variable after loop
scsi: storvsc: Handle BlockSize change in Hyper-V VHD/VHDX file
net: usb: cdc_mbim: avoid altsetting toggling for Telit FE990
net: usb: qmi_wwan: add Telit 0x1080 composition
sh: sanitize the flags on sigreturn
cifs: empty interface list when server doesn't support query interfaces
scsi: core: Add BLIST_SKIP_VPD_PAGES for SKhynix H28U74301AMR
usb: dwc2: fix a devres leak in hw_enable upon suspend resume
usb: gadget: u_audio: don't let userspace block driver unbind
fsverity: Remove WQ_UNBOUND from fsverity read workqueue
igb: revert rtnl_lock() that causes deadlock
dm thin: fix deadlock when swapping to thin device
usb: cdns3: Fix issue with using incorrect PCI device function
usb: chipdea: core: fix return -EINVAL if request role is the same with current role
usb: chipidea: core: fix possible concurrent when switch role
usb: ucsi: Fix NULL pointer deref in ucsi_connector_change()
wifi: mac80211: fix qos on mesh interfaces
nilfs2: fix kernel-infoleak in nilfs_ioctl_wrap_copy()
drm/i915/active: Fix missing debug object activation
drm/i915: Preserve crtc_state->inherited during state clearing
tee: amdtee: fix race condition in amdtee_open_session
firmware: arm_scmi: Fix device node validation for mailbox transport
i2c: xgene-slimpro: Fix out-of-bounds bug in xgene_slimpro_i2c_xfer()
dm stats: check for and propagate alloc_percpu failure
dm crypt: add cond_resched() to dmcrypt_write()
sched/fair: sanitize vruntime of entity being placed
sched/fair: Sanitize vruntime of entity being migrated
ocfs2: fix data corruption after failed write
xfs: shut down the filesystem if we screw up quota reservation
xfs: don't reuse busy extents on extent trim
KVM: fix memoryleak in kvm_init()
NFSD: fix use-after-free in __nfs42_ssc_open()
usb: dwc3: gadget: move cmd_endtransfer to extra function
usb: dwc3: gadget: Add 1ms delay after end transfer command without IOC
kernel: kcsan: kcsan_test: build without structleak plugin
kcsan: avoid passing -g for test
drm/meson: Fix error handling when afbcd.ops->init fails
drm/meson: fix missing component unbind on bind errors
bus: imx-weim: fix branch condition evaluates to a garbage value
dm crypt: avoid accessing uninitialized tasklet
fsverity: don't drop pagecache at end of FS_IOC_ENABLE_VERITY
md: avoid signed overflow in slot_store()
net: hsr: Don't log netdev_err message on unknown prp dst node
ALSA: asihpi: check pao in control_message()
ALSA: hda/ca0132: fixup buffer overrun at tuning_ctl_set()
fbdev: tgafb: Fix potential divide by zero
sched_getaffinity: don't assume 'cpumask_size()' is fully initialized
fbdev: nvidia: Fix potential divide by zero
fbdev: intelfb: Fix potential divide by zero
fbdev: lxfb: Fix potential divide by zero
fbdev: au1200fb: Fix potential divide by zero
tools/power turbostat: Fix /dev/cpu_dma_latency warnings
tracing: Fix wrong return in kprobe_event_gen_test.c
ca8210: Fix unsigned mac_len comparison with zero in ca8210_skb_tx()
mips: bmips: BCM6358: disable RAC flush for TP1
mtd: rawnand: meson: invalidate cache on polling ECC bit
sfc: ef10: don't overwrite offload features at NIC reset
scsi: megaraid_sas: Fix crash after a double completion
ptp_qoriq: fix memory leak in probe()
r8169: fix RTL8168H and RTL8107E rx crc error
regulator: Handle deferred clk
net/net_failover: fix txq exceeding warning
net: stmmac: don't reject VLANs when IFF_PROMISC is set
can: bcm: bcm_tx_setup(): fix KMSAN uninit-value in vfs_write
s390/vfio-ap: fix memory leak in vfio_ap device driver
ALSA: ymfpci: Fix assignment in if condition
ALSA: ymfpci: Fix BUG_ON in probe function
net: ipa: compute DMA pool size properly
i40e: fix registers dump after run ethtool adapter self test
bnxt_en: Fix typo in PCI id to device description string mapping
bnxt_en: Add missing 200G link speed reporting
net: dsa: mv88e6xxx: Enable IGMP snooping on user ports only
pinctrl: ocelot: Fix alt mode for ocelot
Input: alps - fix compatibility with -funsigned-char
Input: focaltech - use explicitly signed char type
cifs: prevent infinite recursion in CIFSGetDFSRefer()
cifs: fix DFS traversal oops without CONFIG_CIFS_DFS_UPCALL
Input: goodix - add Lenovo Yoga Book X90F to nine_bytes_report DMI table
btrfs: fix race between quota disable and quota assign ioctls
xen/netback: don't do grant copy across page boundary
net: phy: dp83869: fix default value for tx-/rx-internal-delay
pinctrl: amd: Disable and mask interrupts on resume
pinctrl: at91-pio4: fix domain name assignment
powerpc: Don't try to copy PPR for task with NULL pt_regs
NFSv4: Fix hangs when recovering open state after a server reboot
ALSA: hda/conexant: Partial revert of a quirk for Lenovo
ALSA: usb-audio: Fix regression on detection of Roland VS-100
ALSA: hda/realtek: Add quirk for Lenovo ZhaoYang CF4620Z
xtensa: fix KASAN report for show_stack
rcu: Fix rcu_torture_read ftrace event
drm/etnaviv: fix reference leak when mmaping imported buffer
drm/amd/display: Add DSC Support for Synaptics Cascaded MST Hub
s390/uaccess: add missing earlyclobber annotations to __clear_user()
btrfs: scan device in non-exclusive mode
zonefs: Fix error message in zonefs_file_dio_append()
selftests/bpf: Test btf dump for struct with padding only fields
libbpf: Fix BTF-to-C converter's padding logic
selftests/bpf: Add few corner cases to test padding handling of btf_dump
libbpf: Fix btf_dump's packed struct determination
ext4: fix kernel BUG in 'ext4_write_inline_data_end()'
gfs2: Always check inode size of inline inodes
hsr: ratelimit only when errors are printed
Linux 5.10.177
Change-Id: Ib596b399350d080d7e94c80c1a6bb3c64e971187
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit b69245126a ]
Since commit 6c40624930 ("bootconfig: Increase max nodes of bootconfig
from 1024 to 8192 for DCC support") increased the max number of bootconfig
node to 8192, the bootconfig testcase of the max number of nodes fails.
To fix this issue, we can not simply increase the number in the test script
because the test bootconfig file becomes too big (>32KB). To fix that, we
can use a combination of three alphabets (26^3 = 17576). But with that,
we can not express the 8193 (just one exceed from the limitation) because
it also exceeds the max size of bootconfig. So, the first 26 nodes will just
use one alphabet.
With this fix, test-bootconfig.sh passes all tests.
Link: https://lore.kernel.org/all/167888844790.791176.670805252426835131.stgit@devnote2/
Reported-by: Heinz Wiesinger <pprkut@slackware.com>
Link: https://lore.kernel.org/all/2463802.XAFRqVoOGU@amaterasu.liwjatan.org
Fixes: 6c40624930 ("bootconfig: Increase max nodes of bootconfig from 1024 to 8192 for DCC support")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Changes in 5.10.69
PCI: pci-bridge-emul: Add PCIe Root Capabilities Register
PCI: aardvark: Fix reporting CRS value
console: consume APC, DM, DCS
s390/pci_mmio: fully validate the VMA before calling follow_pte()
ARM: Qualify enabling of swiotlb_init()
ARM: 9077/1: PLT: Move struct plt_entries definition to header
ARM: 9078/1: Add warn suppress parameter to arm_gen_branch_link()
ARM: 9079/1: ftrace: Add MODULE_PLTS support
ARM: 9098/1: ftrace: MODULE_PLT: Fix build problem without DYNAMIC_FTRACE
Revert "net/mlx5: Register to devlink ingress VLAN filter trap"
sctp: validate chunk size in __rcv_asconf_lookup
sctp: add param size validation for SCTP_PARAM_SET_PRIMARY
staging: rtl8192u: Fix bitwise vs logical operator in TranslateRxSignalStuff819xUsb()
coredump: fix memleak in dump_vma_snapshot()
um: virtio_uml: fix memory leak on init failures
dmaengine: acpi: Avoid comparison GSI with Linux vIRQ
perf test: Fix bpf test sample mismatch reporting
tools lib: Adopt memchr_inv() from kernel
perf tools: Allow build-id with trailing zeros
thermal/drivers/exynos: Fix an error code in exynos_tmu_probe()
9p/trans_virtio: Remove sysfs file on probe failure
prctl: allow to setup brk for et_dyn executables
nilfs2: use refcount_dec_and_lock() to fix potential UAF
profiling: fix shift-out-of-bounds bugs
PM: sleep: core: Avoid setting power.must_resume to false
pwm: lpc32xx: Don't modify HW state in .probe() after the PWM chip was registered
pwm: mxs: Don't modify HW state in .probe() after the PWM chip was registered
dmaengine: idxd: fix wq slot allocation index check
platform/chrome: sensorhub: Add trace events for sample
platform/chrome: cros_ec_trace: Fix format warnings
ceph: allow ceph_put_mds_session to take NULL or ERR_PTR
ceph: cancel delayed work instead of flushing on mdsc teardown
Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH
tools/bootconfig: Fix tracing_on option checking in ftrace2bconf.sh
thermal/core: Fix thermal_cooling_device_register() prototype
drm/amdgpu: Disable PCIE_DPM on Intel RKL Platform
drivers: base: cacheinfo: Get rid of DEFINE_SMP_CALL_CACHE_FUNCTION()
dma-buf: DMABUF_MOVE_NOTIFY should depend on DMA_SHARED_BUFFER
parisc: Move pci_dev_is_behind_card_dino to where it is used
iommu/amd: Relocate GAMSup check to early_enable_iommus
dmaengine: idxd: depends on !UML
dmaengine: sprd: Add missing MODULE_DEVICE_TABLE
dmaengine: ioat: depends on !UML
dmaengine: xilinx_dma: Set DMA mask for coherent APIs
ceph: request Fw caps before updating the mtime in ceph_write_iter
ceph: remove the capsnaps when removing caps
ceph: lockdep annotations for try_nonblocking_invalidate
btrfs: update the bdev time directly when closing
btrfs: fix lockdep warning while mounting sprout fs
nilfs2: fix memory leak in nilfs_sysfs_create_device_group
nilfs2: fix NULL pointer in nilfs_##name##_attr_release
nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group
nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group
nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group
habanalabs: add validity check for event ID received from F/W
pwm: img: Don't modify HW state in .remove() callback
pwm: rockchip: Don't modify HW state in .remove() callback
pwm: stm32-lp: Don't modify HW state in .remove() callback
blk-throttle: fix UAF by deleteing timer in blk_throtl_exit()
blk-mq: allow 4x BLK_MAX_REQUEST_COUNT at blk_plug for multiple_queues
rtc: rx8010: select REGMAP_I2C
sched/idle: Make the idle timer expire in hard interrupt context
drm/nouveau/nvkm: Replace -ENOSYS with -ENODEV
Linux 5.10.69
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I982349e3a65b83e92e9b808154bf8c84d094f1d6
Changes in 5.10.44
proc: Track /proc/$pid/attr/ opener mm_struct
ASoC: max98088: fix ni clock divider calculation
ASoC: amd: fix for pcm_read() error
spi: Fix spi device unregister flow
spi: spi-zynq-qspi: Fix stack violation bug
bpf: Forbid trampoline attach for functions with variable arguments
net/nfc/rawsock.c: fix a permission check bug
usb: cdns3: Fix runtime PM imbalance on error
ASoC: Intel: bytcr_rt5640: Add quirk for the Glavey TM800A550L tablet
ASoC: Intel: bytcr_rt5640: Add quirk for the Lenovo Miix 3-830 tablet
vfio-ccw: Reset FSM state to IDLE inside FSM
vfio-ccw: Serialize FSM IDLE state with I/O completion
ASoC: sti-sas: add missing MODULE_DEVICE_TABLE
spi: sprd: Add missing MODULE_DEVICE_TABLE
usb: chipidea: udc: assign interrupt number to USB gadget structure
isdn: mISDN: netjet: Fix crash in nj_probe:
bonding: init notify_work earlier to avoid uninitialized use
netlink: disable IRQs for netlink_lock_table()
net: mdiobus: get rid of a BUG_ON()
cgroup: disable controllers at parse time
wq: handle VM suspension in stall detection
net/qla3xxx: fix schedule while atomic in ql_sem_spinlock
RDS tcp loopback connection can hang
net:sfc: fix non-freed irq in legacy irq mode
scsi: bnx2fc: Return failure if io_req is already in ABTS processing
scsi: vmw_pvscsi: Set correct residual data length
scsi: hisi_sas: Drop free_irq() of devm_request_irq() allocated irq
scsi: target: qla2xxx: Wait for stop_phase1 at WWN removal
net: macb: ensure the device is available before accessing GEMGXL control registers
net: appletalk: cops: Fix data race in cops_probe1
net: dsa: microchip: enable phy errata workaround on 9567
nvme-fabrics: decode host pathing error for connect
MIPS: Fix kernel hang under FUNCTION_GRAPH_TRACER and PREEMPT_TRACER
dm verity: fix require_signatures module_param permissions
bnx2x: Fix missing error code in bnx2x_iov_init_one()
nvme-tcp: remove incorrect Kconfig dep in BLK_DEV_NVME
nvmet: fix false keep-alive timeout when a controller is torn down
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers
spi: Don't have controller clean up spi device before driver unbind
spi: Cleanup on failure of initial setup
i2c: mpc: Make use of i2c_recover_bus()
i2c: mpc: implement erratum A-004447 workaround
ALSA: seq: Fix race of snd_seq_timer_open()
ALSA: firewire-lib: fix the context to call snd_pcm_stop_xrun()
ALSA: hda/realtek: headphone and mic don't work on an Acer laptop
ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Elite Dragonfly G2
ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP EliteBook x360 1040 G8
ALSA: hda/realtek: fix mute/micmute LEDs for HP EliteBook 840 Aero G8
ALSA: hda/realtek: fix mute/micmute LEDs for HP ZBook Power G8
spi: bcm2835: Fix out-of-bounds access with more than 4 slaves
Revert "ACPI: sleep: Put the FACS table after using it"
drm: Fix use-after-free read in drm_getunique()
drm: Lock pointer access in drm_master_release()
perf/x86/intel/uncore: Fix M2M event umask for Ice Lake server
KVM: X86: MMU: Use the correct inherited permissions to get shadow page
kvm: avoid speculation-based attacks from out-of-range memslot accesses
staging: rtl8723bs: Fix uninitialized variables
async_xor: check src_offs is not NULL before updating it
btrfs: return value from btrfs_mark_extent_written() in case of error
btrfs: promote debugging asserts to full-fledged checks in validate_super
cgroup1: don't allow '\n' in renaming
ftrace: Do not blindly read the ip address in ftrace_bug()
mmc: renesas_sdhi: abort tuning when timeout detected
mmc: renesas_sdhi: Fix HS400 on R-Car M3-W+
USB: f_ncm: ncm_bitrate (speed) is unsigned
usb: f_ncm: only first packet of aggregate needs to start timer
usb: pd: Set PD_T_SINK_WAIT_CAP to 310ms
usb: dwc3-meson-g12a: fix usb2 PHY glue init when phy0 is disabled
usb: dwc3: meson-g12a: Disable the regulator in the error handling path of the probe
usb: dwc3: gadget: Bail from dwc3_gadget_exit() if dwc->gadget is NULL
usb: dwc3: ep0: fix NULL pointer exception
usb: musb: fix MUSB_QUIRK_B_DISCONNECT_99 handling
usb: typec: wcove: Use LE to CPU conversion when accessing msg->header
usb: typec: ucsi: Clear PPM capability data in ucsi_init() error path
usb: typec: intel_pmc_mux: Put fwnode in error case during ->probe()
usb: typec: intel_pmc_mux: Add missed error check for devm_ioremap_resource()
usb: gadget: f_fs: Ensure io_completion_wq is idle during unbind
USB: serial: ftdi_sio: add NovaTech OrionMX product ID
USB: serial: omninet: add device id for Zyxel Omni 56K Plus
USB: serial: quatech2: fix control-request directions
USB: serial: cp210x: fix alternate function for CP2102N QFN20
usb: gadget: eem: fix wrong eem header operation
usb: fix various gadgets null ptr deref on 10gbps cabling.
usb: fix various gadget panics on 10gbps cabling
usb: typec: tcpm: cancel vdm and state machine hrtimer when unregister tcpm port
usb: typec: tcpm: cancel frs hrtimer when unregister tcpm port
regulator: core: resolve supply for boot-on/always-on regulators
regulator: max77620: Use device_set_of_node_from_dev()
regulator: bd718x7: Fix the BUCK7 voltage setting on BD71837
regulator: fan53880: Fix missing n_voltages setting
regulator: bd71828: Fix .n_voltages settings
regulator: rtmv20: Fix .set_current_limit/.get_current_limit callbacks
phy: usb: Fix misuse of IS_ENABLED
usb: dwc3: gadget: Disable gadget IRQ during pullup disable
usb: typec: mux: Fix copy-paste mistake in typec_mux_match
drm/mcde: Fix off by 10^3 in calculation
drm/msm/a6xx: fix incorrectly set uavflagprd_inv field for A650
drm/msm/a6xx: update/fix CP_PROTECT initialization
drm/msm/a6xx: avoid shadow NULL reference in failure path
RDMA/ipoib: Fix warning caused by destroying non-initial netns
RDMA/mlx4: Do not map the core_clock page to user space unless enabled
ARM: cpuidle: Avoid orphan section warning
vmlinux.lds.h: Avoid orphan section with !SMP
tools/bootconfig: Fix error return code in apply_xbc()
phy: cadence: Sierra: Fix error return code in cdns_sierra_phy_probe()
ASoC: core: Fix Null-point-dereference in fmt_single_name()
ASoC: meson: gx-card: fix sound-dai dt schema
phy: ti: Fix an error code in wiz_probe()
gpio: wcd934x: Fix shift-out-of-bounds error
perf: Fix data race between pin_count increment/decrement
sched/fair: Keep load_avg and load_sum synced
sched/fair: Make sure to update tg contrib for blocked load
sched/fair: Fix util_est UTIL_AVG_UNCHANGED handling
x86/nmi_watchdog: Fix old-style NMI watchdog regression on old Intel CPUs
KVM: x86: Ensure liveliness of nested VM-Enter fail tracepoint message
IB/mlx5: Fix initializing CQ fragments buffer
NFS: Fix a potential NULL dereference in nfs_get_client()
NFSv4: Fix deadlock between nfs4_evict_inode() and nfs4_opendata_get_inode()
perf session: Correct buffer copying when peeking events
kvm: fix previous commit for 32-bit builds
NFS: Fix use-after-free in nfs4_init_client()
NFSv4: Fix second deadlock in nfs4_evict_inode()
NFSv4: nfs4_proc_set_acl needs to restore NFS_CAP_UIDGID_NOMAP on error.
scsi: core: Fix error handling of scsi_host_alloc()
scsi: core: Fix failure handling of scsi_add_host_with_dma()
scsi: core: Put .shost_dev in failure path if host state changes to RUNNING
scsi: core: Only put parent device if host state differs from SHOST_CREATED
tracing: Correct the length check which causes memory corruption
proc: only require mm_struct for writing
Linux 5.10.44
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ic64172b4e72ccb54d96000b3065dd8b33aa9fef5
Support mixing a value and subkeys under a key. Since kernel cmdline
options will support "aaa.bbb=value1 aaa.bbb.ccc=value2", it is
better that the bootconfig supports such configuration too.
Note that this does not change syntax itself but just accepts
mixed value and subkeys e.g.
key = value1
key.subkey = value2
But this is not accepted;
key {
value1
subkey = value2
}
That will make value1 as a subkey.
Also, the order of the value node under a key is fixed. If there
are a value and subkeys, the value is always the first child node
of the key. Thus if user specifies subkeys first, e.g.
key.subkey = value1
key = value2
In the program (and /proc/bootconfig), it will be shown as below
key = value2
key.subkey = value1
Picking this up FROMLIST to get the fix ASAP. It is likely to be
accepted upstream.
Signed-off-by: Devin Moore <devinmoore@google.com>
Link: https://lore.kernel.org/lkml/162262192121.264090.6540508908529705156.stgit@devnote2/
Bug: 183237066
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Change-Id: I60bdc229c5162efc55fe2e40c75c993f0f27ac18
It is not possible to put an array value with subkeys under
a key node, because both of subkeys and the array elements
are using "next" field of the xbc_node.
Thus this changes the array values to use "child" field in
the array case. The reason why split this change is to
test it easily.
Picking this up FROMLIST to get the fix ASAP. It is likely to be
accepted upstream.
Signed-off-by: Devin Moore <devinmoore@google.com>
Link: https://lore.kernel.org/lkml/162262192121.264090.6540508908529705156.stgit@devnote2/
Bug: 183237066
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Change-Id: Iabd54cda32f6bde12297942d6b03bd2555e6eb0c
Since the "fallthrough" is defined only in the kernel, building
lib/bootconfig.c as a part of user-space tools causes a build
error.
Add a dummy fallthrough to avoid the build error.
Picking this up FROMLIST to get the fix ASAP. It is likely to be
accepted upstream.
Signed-off-by: Devin Moore <devinmoore@google.com>
Link: https://lore.kernel.org/lkml/162262192121.264090.6540508908529705156.stgit@devnote2/
Bug: 183237066
Cc: stable@vger.kernel.org
Fixes: 4c1ca831ad ("Revert "lib: Revert use of fallthrough pseudo-keyword in lib/"")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Change-Id: I624b42f8d20f57188768f4db3b68c23b0918cbef
Align the bootconfig applied initrd image size to 4. To fill the gap,
the bootconfig command uses null characters in between the bootconfig
data and the footer. This will expands the footer size but don't change
the checksum.
Thus the block image of the initrd file with bootconfig is as follows.
[initrd][bootconfig][(pad)][size][csum]["#BOOTCONFIG\n"]
Link: https://lkml.kernel.org/r/160576522046.320071.8550680670010950634.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pull tracing updates from Steven Rostedt:
"Updates for tracing and bootconfig:
- Add support for "bool" type in synthetic events
- Add per instance tracing for bootconfig
- Support perf-style return probe ("SYMBOL%return") in kprobes and
uprobes
- Allow for kprobes to be enabled earlier in boot up
- Added tracepoint helper function to allow testing if tracepoints
are enabled in headers
- Synthetic events can now have dynamic strings (variable length)
- Various fixes and cleanups"
* tag 'trace-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (58 commits)
tracing: support "bool" type in synthetic trace events
selftests/ftrace: Add test case for synthetic event syntax errors
tracing: Handle synthetic event array field type checking correctly
selftests/ftrace: Change synthetic event name for inter-event-combined test
tracing: Add synthetic event error logging
tracing: Check that the synthetic event and field names are legal
tracing: Move is_good_name() from trace_probe.h to trace.h
tracing: Don't show dynamic string internals in synthetic event description
tracing: Fix some typos in comments
tracing/boot: Add ftrace.instance.*.alloc_snapshot option
tracing: Fix race in trace_open and buffer resize call
tracing: Check return value of __create_val_fields() before using its result
tracing: Fix synthetic print fmt check for use of __get_str()
tracing: Remove a pointless assignment
ftrace: ftrace_global_list is renamed to ftrace_ops_list
ftrace: Format variable declarations of ftrace_allocate_records
ftrace: Simplify the calculation of page number for ftrace_page->records
ftrace: Simplify the dyn_ftrace->flags macro
ftrace: Simplify the hash calculation
ftrace: Use fls() to get the bits for dup_hash()
...
Add a ftrace2bconf.sh under tools/bootconfig/scripts which generates
a bootconfig file from the current ftrace settings.
To read the ftrace settings, ftrace2bconf.sh requires the root
privilege (or sudo). The ftrace2bconf.sh will output the bootconfig
to stdout and error messages to stderr, so usually you'll run it as
# ftrace2bconf.sh > ftrace.bconf
Note that some ftrace configurations are not supported. For example,
function-call/callgraph trace/notrace settings are not supported because
the wildcard has been expanded and lost in the ftrace anymore.
Link: https://lkml.kernel.org/r/159704852163.175360.16738029520293360558.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add a bconf2ftrace.sh under tools/bootconfig/scripts which generates
a shell script to setup boot-time trace from bootconfig file for testing
the bootconfig.
bconf2ftrace.sh will take a bootconfig file (includes boot-time tracing)
and convert it into a shell-script which is almost same as the boot-time
tracer does.
If --apply option is given, it also tries to apply those command to the
running kernel, which requires the root privilege (or sudo).
For example, if you just want to confirm the shell commands, save
the output as below.
# bconf2ftrace.sh ftrace.bconf > ftrace.sh
Or, you can apply it directly.
# bconf2ftrace.sh --apply ftrace.bconf
Note that some boot-time tracing parameters under kernel.* are not able
to set via tracefs nor procfs (e.g. tp_printk, traceoff_on_warning.),
so those are ignored.
Link: https://lkml.kernel.org/r/159704851101.175360.15119132351139842345.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pull tracing updates from Steven Rostedt:
"New tracing features:
- The ring buffer is no longer disabled when reading the trace file.
The trace_pipe file was made to be used for live tracing and
reading as it acted like the normal producer/consumer. As the trace
file would not consume the data, the easy way of handling it was to
just disable writes to the ring buffer.
This came to a surprise to the BPF folks who complained about lost
events due to reading. This is no longer an issue. If someone wants
to keep the old disabling there's a new option "pause-on-trace"
that can be set.
- New set_ftrace_notrace_pid file. PIDs in this file will not be
traced by the function tracer.
Similar to set_ftrace_pid, which makes the function tracer only
trace those tasks with PIDs in the file, the set_ftrace_notrace_pid
does the reverse.
- New set_event_notrace_pid file. PIDs in this file will cause events
not to be traced if triggered by a task with a matching PID.
Similar to the set_event_pid file but will not be traced. Note,
sched_waking and sched_switch events may still be traced if one of
the tasks referenced by those events contains a PID that is allowed
to be traced.
Tracing related features:
- New bootconfig option, that is attached to the initrd file.
If bootconfig is on the command line, then the initrd file is
searched looking for a bootconfig appended at the end.
- New GPU tracepoint infrastructure to help the gfx drivers to get
off debugfs (acked by Greg Kroah-Hartman)
And other minor updates and fixes"
* tag 'trace-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (27 commits)
tracing: Do not allocate buffer in trace_find_next_entry() in atomic
tracing: Add documentation on set_ftrace_notrace_pid and set_event_notrace_pid
selftests/ftrace: Add test to test new set_event_notrace_pid file
selftests/ftrace: Add test to test new set_ftrace_notrace_pid file
tracing: Create set_event_notrace_pid to not trace tasks
ftrace: Create set_ftrace_notrace_pid to not trace tasks
ftrace: Make function trace pid filtering a bit more exact
ftrace/kprobe: Show the maxactive number on kprobe_events
tracing: Have the document reflect that the trace file keeps tracing enabled
ring-buffer/tracing: Have iterator acknowledge dropped events
tracing: Do not disable tracing when reading the trace file
ring-buffer: Do not disable recording when there is an iterator
ring-buffer: Make resize disable per cpu buffer instead of total buffer
ring-buffer: Optimize rb_iter_head_event()
ring-buffer: Do not die if rb_iter_peek() fails more than thrice
ring-buffer: Have rb_iter_head_event() handle concurrent writer
ring-buffer: Add page_stamp to iterator for synchronization
ring-buffer: Rename ring_buffer_read() to read_buffer_iter_advance()
ring-buffer: Have ring_buffer_empty() not depend on tracing stopped
tracing: Save off entry when peeking at next entry
...
Show line and column when we got a parse error in bootconfig tool.
Current lib/bootconfig shows the parse error with byte offset, but
that is not human readable.
This makes xbc_init() not showing error message itself but able to
pass the error message and position to caller, so that the caller
can decode it and show the error message with line number and columns.
With this patch, bootconfig tool shows an error with line:column as
below.
$ cat samples/bad-dotword.bconf
# do not start keyword with .
key {
.word = 1
}
$ ./bootconfig -a samples/bad-dotword.bconf initrd
Parse Error: Invalid keyword at 3:3
Link: http://lkml.kernel.org/r/158323469002.10560.4023923847704522760.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently, bootconfig adds a new value on the existing key to the tail of an
array. But this looks a bit confusing because an admin can easily rewrite
the original value in the same config file.
This rejects the following value re-definition.
key = value1
...
key = value2
You should rewrite value1 to value2 in this case.
Link: http://lkml.kernel.org/r/158227282199.12842.10110929876059658601.stgit@devnote2
Suggested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
[ Fixed spelling of arraies to arrays ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reject if a value node is mixed with subkey node on same
parent key node.
A value node can not co-exist with subkey node under some key
node, e.g.
key = value
key.subkey = another-value
This is not be allowed because bootconfig API is not designed
to handle such case.
Link: http://lkml.kernel.org/r/158220115232.26565.7792340045009731803.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add bootconfig magic word to the end of bootconfig on initrd
image for indicating explicitly the bootconfig is there.
Also tools/bootconfig treats wrong size or wrong checksum or
parse error as an error, because if there is a bootconfig magic
word, there must be a bootconfig.
The bootconfig magic word is "#BOOTCONFIG\n", 12 bytes word.
Thus the block image of the initrd file with bootconfig is
as follows.
[Initrd][bootconfig][size][csum][#BOOTCONFIG\n]
Link: http://lkml.kernel.org/r/158220112263.26565.3944814205960612841.stgit@devnote2
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Show the number of bootconfig nodes when applying new bootconfig to
initrd.
Since there are limitations of bootconfig not only in its filesize,
but also the number of nodes, the number should be shown when applying
so that user can get the feeling of scale of current bootconfig.
Link: http://lkml.kernel.org/r/158091061337.27924.10886706631693823982.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add "bootconfig" command which operates the bootconfig
config-data on initrd image.
User can add/delete/verify the boot config on initrd
image using this command.
e.g.
Add a boot config to initrd image
# bootconfig -a myboot.conf /boot/initrd.img
Remove it.
# bootconfig -d /boot/initrd.img
Or verify (and show) it.
# bootconfig /boot/initrd.img
Link: http://lkml.kernel.org/r/157867223582.17873.14342161849213219982.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
[ Removed extra blank line at end of bootconfig.c ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Greg Kroah-Hartman