Changes in 5.10.127
vt: drop old FONT ioctls
random: schedule mix_interrupt_randomness() less often
random: quiet urandom warning ratelimit suppression message
ALSA: hda/via: Fix missing beep setup
ALSA: hda/conexant: Fix missing beep setup
ALSA: hda/realtek: Add mute LED quirk for HP Omen laptop
ALSA: hda/realtek - ALC897 headset MIC no sound
ALSA: hda/realtek: Apply fixup for Lenovo Yoga Duet 7 properly
ALSA: hda/realtek: Add quirk for Clevo PD70PNT
ALSA: hda/realtek: Add quirk for Clevo NS50PU
net: openvswitch: fix parsing of nw_proto for IPv6 fragments
btrfs: add error messages to all unrecognized mount options
mmc: sdhci-pci-o2micro: Fix card detect by dealing with debouncing
mtd: rawnand: gpmi: Fix setting busy timeout setting
ata: libata: add qc->flags in ata_qc_complete_template tracepoint
dm era: commit metadata in postsuspend after worker stops
dm mirror log: clear log bits up to BITS_PER_LONG boundary
USB: serial: option: add Telit LE910Cx 0x1250 composition
USB: serial: option: add Quectel EM05-G modem
USB: serial: option: add Quectel RM500K module support
drm/msm: Fix double pm_runtime_disable() call
netfilter: nftables: add nft_parse_register_load() and use it
netfilter: nftables: add nft_parse_register_store() and use it
netfilter: use get_random_u32 instead of prandom
scsi: scsi_debug: Fix zone transition to full condition
drm/msm: use for_each_sgtable_sg to iterate over scatterlist
bpf: Fix request_sock leak in sk lookup helpers
drm/sun4i: Fix crash during suspend after component bind failure
bpf, x86: Fix tail call count offset calculation on bpf2bpf call
phy: aquantia: Fix AN when higher speeds than 1G are not advertised
tipc: simplify the finalize work queue
tipc: fix use-after-free Read in tipc_named_reinit
igb: fix a use-after-free issue in igb_clean_tx_ring
bonding: ARP monitor spams NETDEV_NOTIFY_PEERS notifiers
net/sched: sch_netem: Fix arithmetic in netem_dump() for 32-bit platforms
drm/msm/mdp4: Fix refcount leak in mdp4_modeset_init_intf
drm/msm/dp: check core_initialized before disable interrupts at dp_display_unbind()
drm/msm/dp: fixes wrong connection state caused by failure of link train
drm/msm/dp: deinitialize mainlink if link training failed
drm/msm/dp: promote irq_hpd handle to handle link training correctly
drm/msm/dp: fix connect/disconnect handled at irq_hpd
erspan: do not assume transport header is always set
net/tls: fix tls_sk_proto_close executed repeatedly
udmabuf: add back sanity check
selftests: netfilter: correct PKTGEN_SCRIPT_PATHS in nft_concat_range.sh
x86/xen: Remove undefined behavior in setup_features()
MIPS: Remove repetitive increase irq_err_count
afs: Fix dynamic root getattr
ice: ethtool: advertise 1000M speeds properly
regmap-irq: Fix a bug in regmap_irq_enable() for type_in_mask chips
igb: Make DMA faster when CPU is active on the PCIe link
virtio_net: fix xdp_rxq_info bug after suspend/resume
Revert "net/tls: fix tls_sk_proto_close executed repeatedly"
nvme: centralize setting the timeout in nvme_alloc_request
nvme: split nvme_alloc_request()
nvme: mark nvme_setup_passsthru() inline
nvme: don't check nvme_req flags for new req
nvme-pci: allocate nvme_command within driver pdu
nvme-pci: add NO APST quirk for Kioxia device
nvme: move the Samsung X5 quirk entry to the core quirks
gpio: winbond: Fix error code in winbond_gpio_get()
s390/cpumf: Handle events cycles and instructions identical
iio: mma8452: fix probe fail when device tree compatible is used.
iio: adc: vf610: fix conversion mode sysfs node name
usb: typec: wcove: Drop wrong dependency to INTEL_SOC_PMIC
xhci: turn off port power in shutdown
xhci-pci: Allow host runtime PM as default for Intel Raptor Lake xHCI
xhci-pci: Allow host runtime PM as default for Intel Meteor Lake xHCI
usb: gadget: Fix non-unique driver names in raw-gadget driver
USB: gadget: Fix double-free bug in raw_gadget driver
usb: chipidea: udc: check request status before setting device address
f2fs: attach inline_data after setting compression
iio:chemical:ccs811: rearrange iio trigger get and register
iio:accel:bma180: rearrange iio trigger get and register
iio:accel:mxc4005: rearrange iio trigger get and register
iio: accel: mma8452: ignore the return value of reset operation
iio: gyro: mpu3050: Fix the error handling in mpu3050_power_up()
iio: trigger: sysfs: fix use-after-free on remove
iio: adc: stm32: fix maximum clock rate for stm32mp15x
iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value)
iio: adc: stm32: Fix ADCs iteration in irq handler
iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message
iio: adc: axp288: Override TS pin bias current for some models
iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client
xtensa: xtfpga: Fix refcount leak bug in setup
xtensa: Fix refcount leak bug in time.c
parisc/stifb: Fix fb_is_primary_device() only available with CONFIG_FB_STI
parisc: Enable ARCH_HAS_STRICT_MODULE_RWX
powerpc: Enable execve syscall exit tracepoint
powerpc/rtas: Allow ibm,platform-dump RTAS call with null buffer address
powerpc/powernv: wire up rng during setup_arch
ARM: dts: imx7: Move hsic_phy power domain to HSIC PHY node
ARM: dts: imx6qdl: correct PU regulator ramp delay
ARM: exynos: Fix refcount leak in exynos_map_pmu
soc: bcm: brcmstb: pm: pm-arm: Fix refcount leak in brcmstb_pm_probe
ARM: Fix refcount leak in axxia_boot_secondary
memory: samsung: exynos5422-dmc: Fix refcount leak in of_get_dram_timings
ARM: cns3xxx: Fix refcount leak in cns3xxx_init
modpost: fix section mismatch check for exported init/exit sections
random: update comment from copy_to_user() -> copy_to_iter()
kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS (2nd attempt)
powerpc/pseries: wire up rng during setup_arch()
Linux 5.10.127
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I1a36d81c8c44a8bf1c20cf9e1060394e4927eedb
This reverts commit 78e008dca2 which is
commit 7cb4150034 upstream.
It breaks the Android kernel ABI and is not needed for Android devices,
so it is safe to revert for now. If it is determined that it is needed
in the future, it can be brought back in an abi-preserving way.
Bug: 161946584
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I6070f402034c1d22ea70db2d1be160b0d0270b8e
This reverts commit 860e44f21f which is
commit b046f98481 upstream.
It breaks the Android kernel ABI and is not needed for Android devices,
so it is safe to revert for now. If it is determined that it is needed
in the future, it can be brought back in an abi-preserving way.
Bug: 161946584
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Iecee4bbc7165e712da3b7683697a6bd29daae1f8
commit b046f98481 upstream.
Keep the pa_path (hardware path) of the graphics card in sti_struct and use
this info to give more useful info which card is currently being used.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cf936af790 upstream.
Implement fb_is_primary_device() function, so that fbcon detects if this
framebuffer belongs to the default graphics card which was used to start
the system.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a3f781a9d6 upstream.
Add a config option CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION to
enable bitblt and fillrect hardware acceleration in the framebuffer
console. If disabled, such acceleration will not be used, even if it is
supported by the graphics hardware driver.
If you plan to use DRM as your main graphics output system, you should
disable this option since it will prevent compiling in code which isn't
used later on when DRM takes over.
For all other configurations, e.g. if none of your graphic cards support
DRM (yet), DRM isn't available for your architecture, or you can't be
sure that the graphic card in the target system will support DRM, you
most likely want to enable this option.
In the non-accelerated case (e.g. when DRM is used), the inlined
fb_scrollmode() function is hardcoded to return SCROLL_REDRAW and as such the
compiler is able to optimize much unneccesary code away.
In this v3 patch version I additionally changed the GETVYRES() and GETVXRES()
macros to take a pointer to the fbcon_display struct. This fixes the build when
console rotation is enabled and helps the compiler again to optimize out code.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202135531.92183-4-deller@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3dfac26e2e upstream.
Fix a division by zero in `vgacon_resize' with a backtrace like:
vgacon_resize
vc_do_resize
vgacon_init
do_bind_con_driver
do_unbind_con_driver
fbcon_fb_unbind
do_unregister_framebuffer
do_register_framebuffer
register_framebuffer
__drm_fb_helper_initial_config_and_unlock
drm_helper_hpd_irq_event
dw_hdmi_irq
irq_thread
kthread
caused by `c->vc_cell_height' not having been initialized. This has
only started to trigger with commit 860dafa902 ("vt: Fix character
height handling with VT_RESIZEX"), however the ultimate offender is
commit 50ec42edd9 ("[PATCH] Detaching fbcon: fix vgacon to allow
retaking of the console").
Said commit has added a call to `vc_resize' whenever `vgacon_init' is
called with the `init' argument set to 0, which did not happen before.
And the call is made before a key vgacon boot parameter retrieved in
`vgacon_startup' has been propagated in `vgacon_init' for `vc_resize' to
use to the console structure being worked on. Previously the parameter
was `c->vc_font.height' and now it is `c->vc_cell_height'.
In this particular scenario the registration of fbcon has failed and vt
resorts to vgacon. Now fbcon does have initialized `c->vc_font.height'
somehow, unlike `c->vc_cell_height', which is why this code did not
crash before, but either way the boot parameters should have been copied
to the console structure ahead of the call to `vc_resize' rather than
afterwards, so that first the call has a chance to use them and second
they do not change the console structure to something possibly different
from what was used by `vc_resize'.
Move the propagation of the vgacon boot parameters ahead of the call to
`vc_resize' then. Adjust the comment accordingly.
Fixes: 50ec42edd9 ("[PATCH] Detaching fbcon: fix vgacon to allow retaking of the console")
Cc: stable@vger.kernel.org # v2.6.18+
Reported-by: Wim Osterholt <wim@djo.tudelft.nl>
Reported-by: Pavel V. Panteleev <panteleev_p@mcst.ru>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2110252317110.58149@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bec05f33eb upstream.
sticon_build_attr() checked the reverse argument and flipped
background and foreground color, but returned the non-reverse
value afterwards. Fix this and also add two local variables
for foreground and background color to make the code easier
to read.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 860dafa902 upstream.
Restore the original intent of the VT_RESIZEX ioctl's `v_clin' parameter
which is the number of pixel rows per character (cell) rather than the
height of the font used.
For framebuffer devices the two values are always the same, because the
former is inferred from the latter one. For VGA used as a true text
mode device these two parameters are independent from each other: the
number of pixel rows per character is set in the CRT controller, while
font height is in fact hardwired to 32 pixel rows and fonts of heights
below that value are handled by padding their data with blanks when
loaded to hardware for use by the character generator. One can change
the setting in the CRT controller and it will update the screen contents
accordingly regardless of the font loaded.
The `v_clin' parameter is used by the `vgacon' driver to set the height
of the character cell and then the cursor position within. Make the
parameter explicit then, by defining a new `vc_cell_height' struct
member of `vc_data', set it instead of `vc_font.height' from `v_clin' in
the VT_RESIZEX ioctl, and then use it throughout the `vgacon' driver
except where actual font data is accessed which as noted above is
independent from the CRTC setting.
This way the framebuffer console driver is free to ignore the `v_clin'
parameter as irrelevant, as it always should have, avoiding any issues
attempts to give the parameter a meaning there could have caused, such
as one that has led to commit 988d076336 ("vt_ioctl: make VT_RESIZEX
behave like VT_RESIZE"):
"syzbot is reporting UAF/OOB read at bit_putcs()/soft_cursor() [1][2],
for vt_resizex() from ioctl(VT_RESIZEX) allows setting font height
larger than actual font height calculated by con_font_set() from
ioctl(PIO_FONT). Since fbcon_set_font() from con_font_set() allocates
minimal amount of memory based on actual font height calculated by
con_font_set(), use of vt_resizex() can cause UAF/OOB read for font
data."
The problem first appeared around Linux 2.5.66 which predates our repo
history, but the origin could be identified with the old MIPS/Linux repo
also at: <git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git>
as commit 9736a3546de7 ("Merge with Linux 2.5.66."), where VT_RESIZEX
code in `vt_ioctl' was updated as follows:
if (clin)
- video_font_height = clin;
+ vc->vc_font.height = clin;
making the parameter apply to framebuffer devices as well, perhaps due
to the use of "font" in the name of the original `video_font_height'
variable. Use "cell" in the new struct member then to avoid ambiguity.
References:
[1] https://syzkaller.appspot.com/bug?id=32577e96d88447ded2d3b76d71254fb855245837
[2] https://syzkaller.appspot.com/bug?id=6b8355d27b2b94fb5cedf4655e3a59162d9e48e3
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org # v2.6.12+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d4d0ad57b3 upstream.
Fix an issue with VGA console font size changes made after the initial
video text mode has been changed with a user tool like `svgatextmode'
calling the VT_RESIZEX ioctl. As it stands in that case the original
screen geometry continues being used to validate further VT resizing.
Consequently when the video adapter is firstly reprogrammed from the
original say 80x25 text mode using a 9x16 character cell (720x400 pixel
resolution) to say 80x37 text mode and the same character cell (720x592
pixel resolution), and secondly the CRTC character cell updated to 9x8
(by loading a suitable font with the KD_FONT_OP_SET request of the
KDFONTOP ioctl), the VT geometry does not get further updated from 80x37
and only upper half of the screen is used for the VT, with the lower
half showing rubbish corresponding to whatever happens to be there in
the video memory that maps to that part of the screen. Of course the
proportions change according to text mode geometries and font sizes
chosen.
Address the problem then, by updating the text mode geometry defaults
rather than checking against them whenever the VT is resized via a user
ioctl.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: e400b6ec4e ("vt/vgacon: Check if screen resize request comes from userspace")
Cc: stable@vger.kernel.org # v2.6.24+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a major rework of the sticon (parisc text console) driver in
order to support user font support.
Usually one want to use the stifb (parisc framebuffer driver) which is
based on fbcon and does support fonts and colors, but some old machines
(e.g. HP 730 workstations) don't provide a supported stifb graphic card,
and for those user fonts are preferred.
This patch drops unused code for software cursor and scrollback,
enhances the debug output and adds better documentation.
The code was tested on various machines with byte-mode and word-mode
graphic cards on GSC- and PCI-busses.
Signed-off-by: Helge Deller <deller@gmx.de>
If the ROM provides functional STI routines, always register the sticon
driver, even if the serial console was choosen as boot device.
Additionally, in that case, do not make the sticon driver the default
output console device.
Signed-off-by: Helge Deller <deller@gmx.de>
Pull tty/serial updates from Greg KH:
"Here is the big set of tty and serial driver patches for 5.10-rc1.
Lots of little things in here, including:
- tasklet_setup api conversions
- sysrq support for capital letters
- vt and vc cleanups and unwinding the mess some more
- serial driver updates and minor tweaks
- new device ids
- rs485 support for some drivers
- serial binding documentation updates
- lots of small serial driver changes for reported issues
All have been in linux-next for a while with no reported issues"
* tag 'tty-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
serial: mcf: add sysrq capability
serial: fsl_lpuart: add sysrq support when using dma
fbcon: remove no-op fbcon_set_origin()
tty/sysrq: Extend the sysrq_key_table to cover capital letters
serial: max310x: rework RX interrupt handling
serial: 8250_dw: Fix clk-notifier/port suspend deadlock
serial: 8250: Skip uninitialized TTY port baud rate update
serial: 8250: Discard RTS/DTS setting from clock update method
tty: serial: imx: disable TXDC IRQ in imx_uart_shutdown() to avoid IRQ storm
serial: 8250_fsl: Fix TX interrupt handling condition
serial: pl011: Fix lockdep splat when handling magic-sysrq interrupt
tty: serial: fsl_lpuart: fix lpuart32_poll_get_char
tty: serial: lpuart: fix lpuart32_write usage
serial: qcom_geni_serial: To correct QUP Version detection logic
serial: mvebu-uart: fix unused variable warning
vt_ioctl: make VT_RESIZEX behave like VT_RESIZE
serial: mvebu-uart: simplify the return expression of mvebu_uart_probe()
tty: serial: imx: fix link error with CONFIG_SERIAL_CORE_CONSOLE=n
tty: hvc: fix link error with CONFIG_SERIAL_CORE_CONSOLE=n
pch_uart: drop double zeroing
...
We need the tty/serial fixes in here and this resolves a merge issue in
the 8250 driver.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yunhai Zhang recently fixed a VGA software scrollback bug in commit
ebfdfeeae8 ("vgacon: Fix for missing check in scrollback handling"),
but that then made people look more closely at some of this code, and
there were more problems on the vgacon side, but also the fbcon software
scrollback.
We don't really have anybody who maintains this code - probably because
nobody actually _uses_ it any more. Sure, people still use both VGA and
the framebuffer consoles, but they are no longer the main user
interfaces to the kernel, and haven't been for decades, so these kinds
of extra features end up bitrotting and not really being used.
So rather than try to maintain a likely unused set of code, I'll just
aggressively remove it, and see if anybody even notices. Maybe there
are people who haven't jumped on the whole GUI badnwagon yet, and think
it's just a fad. And maybe those people use the scrollback code.
If that turns out to be the case, we can resurrect this again, once
we've found the sucker^Wmaintainer for it who actually uses it.
Reported-by: NopNop Nop <nopitydays@gmail.com>
Tested-by: Willy Tarreau <w@1wt.eu>
Cc: 张云海 <zhangyunhai@nsfocus.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull tty/serial updates from Greg KH:
"Here is the large set of TTY and Serial driver patches for 5.9-rc1.
Lots of bugfixes in here, thanks to syzbot fuzzing for serial and vt
and console code.
Other highlights include:
- much needed vt/vc code cleanup from Jiri Slaby
- 8250 driver fixes and additions
- various serial driver updates and feature enhancements
- locking cleanup for serial/console initializations
- other minor cleanups
All of these have been in linux-next with no reported issues"
* tag 'tty-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (90 commits)
MAINTAINERS: enlist Greg formally for console stuff
vgacon: Fix for missing check in scrollback handling
Revert "serial: 8250: Let serial core initialise spin lock"
serial: 8250: Let serial core initialise spin lock
tty: keyboard, do not speculate on func_table index
serial: stm32: Add RS485 RTS GPIO control
serial: 8250_dw: Fix common clocks usage race condition
serial: 8250_dw: Pass the same rate to the clk round and set rate methods
serial: 8250_dw: Simplify the ref clock rate setting procedure
serial: 8250: Add 8250 port clock update method
tty: serial: imx: add imx earlycon driver
tty: serial: imx: enable imx serial console port as module
tty/synclink: remove leftover bits of non-PCI card support
tty: Use the preferred form for passing the size of a structure type
tty: Fix identation issues in struct serial_struct32
tty: Avoid the use of one-element arrays
serial: msm_serial: add sparse context annotation
serial: pmac_zilog: add sparse context annotation
newport_con: vc_color is now in state
serial: imx: use hrtimers for rs485 delays
...
vgacon_scrollback_update() always leaves enbough room in the scrollback
buffer for the next call, but if the console size changed that room
might not actually be enough, and so we need to re-check.
The check should be in the loop since vgacon_scrollback_cur->tail is
updated in the loop and count may be more than 1 when triggered by CSI M,
as Jiri's PoC:
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/ioctl.h>
#include <fcntl.h>
int main(int argc, char** argv)
{
int fd = open("/dev/tty1", O_RDWR);
unsigned short size[3] = {25, 200, 0};
ioctl(fd, 0x5609, size); // VT_RESIZE
write(fd, "\e[1;1H", 6);
for (int i = 0; i < 30; i++)
write(fd, "\e[10M", 5);
}
It leads to various crashes as vgacon_scrollback_update writes out of
the buffer:
BUG: unable to handle page fault for address: ffffc900001752a0
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
RIP: 0010:mutex_unlock+0x13/0x30
...
Call Trace:
n_tty_write+0x1a0/0x4d0
tty_write+0x1a0/0x2e0
Or to KASAN reports:
BUG: KASAN: slab-out-of-bounds in vgacon_scroll+0x57a/0x8ed
This fixes CVE-2020-14331.
Reported-by: 张云海 <zhangyunhai@nsfocus.com>
Reported-by: Yang Yingliang <yangyingliang@huawei.com>
Reported-by: Kyungtae Kim <kt0755@gmail.com>
Fixes: 15bdab959c ([PATCH] vgacon: Add support for soft scrollback)
Cc: stable@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Solar Designer <solar@openwall.com>
Cc: "Srivatsa S. Bhat" <srivatsa@csail.mit.edu>
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Yunhai Zhang <zhangyunhai@nsfocus.com>
Link: https://lore.kernel.org/r/9fb43895-ca91-9b07-ebfd-808cf854ca95@nsfocus.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce names (en enum) for 0, 1, and 2 constants. We now have
VCI_HALF_BRIGHT, VCI_NORMAL, and VCI_BOLD instead.
Apart from the cleanup,
1) the enum allows for better type checking, and
2) this saves some code. No more fiddling with bits is needed in
assembly now. (OTOH, the structure is larger.)
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20200615074910.19267-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are two copies of some members of struct vc_data. This is because
we need to save them and restore later. Move these memebers to a
separate structure called vc_state. So now instead of members like:
vc_x, vc_y and vc_saved_x, vc_saved_y
we have
state and saved_state (of type: struct vc_state)
containing
state.x, state.y and saved_state.x, saved_state.y
This change:
* makes clear what is saved & restored
* eases save & restore by using memcpy (see save_cur and restore_cur)
Finally, we document the newly added struct vc_state using kernel-doc.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20200615074910.19267-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm-misc-next for v5.9:
UAPI Changes:
- Add DRM_MODE_TYPE_USERDEF for video modes specified in cmdline.
Cross-subsystem Changes:
- Assorted devicetree binding updates.
- Add might_sleep() to dma_fence_wait().
- Fix fbdev's get_user_pages_fast() handling, and use pin_user_pages.
- Small cleanup with IS_BUILTIN in video/fbdev drivers.
- Fix video/hdmi coding style for infoframe size.
Core Changes:
- Silence vblank output during init.
- Fix DP-MST corruption during send msg timeout.
- Clear leak in drm_gem_objecs_lookup().
- Make newlines work with force connector attribute.
- Fix module refcounting error in drm_encoder_slave, and use new i2c api.
- Header fix for drm_managed.c
- More struct_mutex removal for !legacy drivers:
- Remove gem_free_object()
- Removal of drm_gem_object_put_unlocked().
- Show current->comm alongside pid in debug printfs.
- Add drm_client_modeset_check() + drm_client_framebuffer_flush().
- Replace drm_fb_swab16 with drm_fb_swap that also supports 32-bits.
- Remove mode->vrefresh, and compactify drm_display_mode.
- Use drm_* macros for logging and warnings.
- Add WARN when drm_gem_get_pages is used on a private obj.
- Handle importing and imported dmabuf better in shmem helpers.
- Small fix for drm/mm hole size comparison, and remove invalid entry optimization.
- Add a drm/mm selftest.
- Set DSI connector type for DSI panels.
- Assorted small fixes and documentation updates.
- Fix DDI I2C device registration for MST ports, and flushing on destroy.
- Fix master_set return type, used by vmwgfx.
- Make the drm_set/drop_master ioctl symmetrical.
Driver Changes:
Allow iommu in the sun4i driver and use it for sun8i.
- Simplify backlight lookup for omap, amba-clcd and tilcdc.
- Hold reg_lock for rockchip.
- Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice.
- Small assorted fixes to tilcdc, vc4, i915, omap, fbdev/sm712fb, fbdev/pxafb, console/newport_con, msm, virtio, udl, malidp, hdlcd, bridge/ti-sn65dsi86, panfrost.
- Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers.
- Add support for KOE Allow iommu in the sun4i driver and use it for sun8i.
- Simplify backlight lookup for omap, amba-clcd and tilcdc.
- Hold reg_lock for rockchip.
- Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice.
- Small assorted fixes to tilcdc, vc4 (multiple), i915.
- Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers.
- Add support for KOE TX26D202VM0BWA panel.
- Use GEM CMA functions in arc, arm, atmel-hlcdc, fsi-dcu, hisilicon, imx, ingenic, komeda, malidp, mcde, meson, msxfb, rcar-du, shmobile, stm, sti, tilcdc, tve200, zte.
- Remove gem_print_info.
- Improve gem_create_object_helper so udl can use shmem helpers.
- Convert vc4 dt bindings to schemas, and add clock properties.
- Device initialization cleanups for mgag200.
- Add a workaround to fix DP-MST short pulses handling on broken hardware in i915.
- Allow build test compiling arm drivers.
- Use managed pci functions in mgag200 and ast.
- Use dev_groups in malidp.
- Add per pixel alpha support for PX30 VOP in rockchip.
- Silence deferred probe logs in panfrost.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/001cd9a6-405d-4e29-43d8-354f53ae4e8b@linux.intel.com
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When syzkaller tests, there is a UAF:
BUG: KASan: use after free in vgacon_invert_region+0x9d/0x110 at addr
ffff880000100000
Read of size 2 by task syz-executor.1/16489
page:ffffea0000004000 count:0 mapcount:-127 mapping: (null)
index:0x0
page flags: 0xfffff00000000()
page dumped because: kasan: bad access detected
CPU: 1 PID: 16489 Comm: syz-executor.1 Not tainted
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
Call Trace:
[<ffffffffb119f309>] dump_stack+0x1e/0x20
[<ffffffffb04af957>] kasan_report+0x577/0x950
[<ffffffffb04ae652>] __asan_load2+0x62/0x80
[<ffffffffb090f26d>] vgacon_invert_region+0x9d/0x110
[<ffffffffb0a39d95>] invert_screen+0xe5/0x470
[<ffffffffb0a21dcb>] set_selection+0x44b/0x12f0
[<ffffffffb0a3bfae>] tioclinux+0xee/0x490
[<ffffffffb0a1d114>] vt_ioctl+0xff4/0x2670
[<ffffffffb0a0089a>] tty_ioctl+0x46a/0x1a10
[<ffffffffb052db3d>] do_vfs_ioctl+0x5bd/0xc40
[<ffffffffb052e2f2>] SyS_ioctl+0x132/0x170
[<ffffffffb11c9b1b>] system_call_fastpath+0x22/0x27
Memory state around the buggy address:
ffff8800000fff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00
ffff8800000fff80: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00
>ffff880000100000: ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff
It can be reproduce in the linux mainline by the program:
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/ioctl.h>
#include <linux/vt.h>
struct tiocl_selection {
unsigned short xs; /* X start */
unsigned short ys; /* Y start */
unsigned short xe; /* X end */
unsigned short ye; /* Y end */
unsigned short sel_mode; /* selection mode */
};
#define TIOCL_SETSEL 2
struct tiocl {
unsigned char type;
unsigned char pad;
struct tiocl_selection sel;
};
int main()
{
int fd = 0;
const char *dev = "/dev/char/4:1";
struct vt_consize v = {0};
struct tiocl tioc = {0};
fd = open(dev, O_RDWR, 0);
v.v_rows = 3346;
ioctl(fd, VT_RESIZEX, &v);
tioc.type = TIOCL_SETSEL;
ioctl(fd, TIOCLINUX, &tioc);
return 0;
}
When resize the screen, update the 'vc->vc_size_row' to the new_row_size,
but when 'set_origin' in 'vgacon_set_origin', vgacon use 'vga_vram_base'
for 'vc_origin' and 'vc_visible_origin', not 'vc_screenbuf'. It maybe
smaller than 'vc_screenbuf'. When TIOCLINUX, use the new_row_size to calc
the offset, it maybe larger than the vga_vram_size in vgacon driver, then
bad access.
Also, if set an larger screenbuf firstly, then set an more larger
screenbuf, when copy old_origin to new_origin, a bad access may happen.
So, If the screen size larger than vga_vram, resize screen should be
failed. This alse fix CVE-2020-8649 and CVE-2020-8647.
Linus pointed out that overflow checking seems absent. We're saved by
the existing bounds checks in vc_do_resize() with rather strict
limits:
if (cols > VC_RESIZE_MAXCOL || lines > VC_RESIZE_MAXROW)
return -EINVAL;
Fixes: 0aec4867dc ("[PATCH] SVGATextMode fix")
Reference: CVE-2020-8647 and CVE-2020-8649
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
[danvet: augment commit message to point out overflow safety]
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200304022429.37738-1-zhangxiaoxu5@huawei.com
drm-misc-next for 5.7:
UAPI Changes:
- lima: Add support for heap buffers
Cross-subsystem Changes:
Core Changes:
- Implement mode_config mode_valid for memory constrained drivers
- Bus format negociation between bridges
- Consolidate fake vblank events for drivers without vblank interrupts
- drm/bufs: dma_alloc related cleanups
- drm/dp_mst: Various fixes
- drm/print: New drm_device based print helpers
- Thomas is a drm-misc maintainer now!
Driver Changes:
- DPMS cleanups for atomic drivers
- Removal of owner field in SPI tinydrm drivers
- Removal of explicit dependency on DT for tinydrm drivers
- Conversion to YAML schemas for DT bindings
- tidss: New driver
- virtio: various reworks and fixes
- Our usual dozen or so new panels or bridges
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200210093421.xu4sofldm6wm6xq6@gilmour.lan
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have MODULE_LICENCE("GPL*") inside which was used in the initial
scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have EXPORT_.*_SYMBOL_GPL inside which was used in the
initial scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When CONFIG_VGACON_SOFT_SCROLLBACK is selected, the VGA display memory
index and vc_visible_origin don't change when scrollback is activated.
The actual screen content is saved away and the scrollbackdata is copied
over it. However the vt code, and /dev/vcs devices in particular, still
expect vc_origin to always point at the actual screen content not the
displayed scrollback content.
So adjust vc_origin to point at the saved screen content when scrollback
is active and set it back to vc_visible_origin when restoring the screen.
This fixes /dev/vcsa<n> that return scrollback content when they
shouldn't (onli /dev/vcsa without a number should), and also fixes
/dev/vcsu that should return scrollback content when scrollback is
active but currently doesn't.
An unnecessary call to vga_set_mem_top() is also removed.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that we only allow FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER when
fbdev+fbcon are builtin exporting these is no longer necessary.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Having FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER with fbdev+fbcon being build
as a module does not make much sense.
Having FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER only when fbdev+fbcon are
builtin was always the intention, hence the =y checks but they were
checking the wrong option, fbcon is build as part of fb.ko, so we must
check for FB=y.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
It's been a pretty good while since kernel modesetting was introduced.
It has almost entirely replaced previous solutions which required
userspace modesetting, and I can't even recall any drivers off the top
of my head for modern day hardware that don't only support one or the
other. Even nvidia's ugly blob does not require the use of nomodeset,
and only requires that nouveau be blacklisted.
Effectively, the only thing nomodeset does in the year 2018 is disable
your graphics drivers. Since VESA is a thing, this will give many users
the false impression that they've actually fixed an issue they were
having with their machine simply because the laptop will boot up to a
degraded GUI. This of course, is never actually the case.
Things get even worse when you consider that there's still an enormous
amount of tutorials users find on the internet that still suggest adding
nomodeset, along with various users who have been around long enough to
still suggest it.
There really isn't any legitimate reason I can see for this to be an
option that's used by anyone else other then developers, or properly
informed users. So, let's end the confusion and start printing warnings
whenever it's enabled.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Jan H. Schönherr" <jschoenh@amazon.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Export dummycon_[un]register_output_notifier, the fbcon code needs this
and may be build as a module.
Fixes: 83d83bebf4 ("console/fbcon: Add support for deferred console takeover")
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Greg Kroah-Hartman