Commit Graph

111 Commits

Author SHA1 Message Date
Greg Kroah-Hartman 4922049993 Merge 5.10.163 into android12-5.10-lts
Changes in 5.10.163
	usb: musb: remove extra check in musb_gadget_vbus_draw
	arm64: dts: qcom: ipq6018-cp01-c1: use BLSPI1 pins
	arm64: dts: qcom: msm8996: fix GPU OPP table
	ARM: dts: qcom: apq8064: fix coresight compatible
	arm64: dts: qcom: sdm630: fix UART1 pin bias
	arm64: dts: qcom: sdm845-cheza: fix AP suspend pin bias
	arm64: dts: qcom: msm8916: Drop MSS fallback compatible
	objtool, kcsan: Add volatile read/write instrumentation to whitelist
	ARM: dts: stm32: Drop stm32mp15xc.dtsi from Avenger96
	ARM: dts: stm32: Fix AV96 WLAN regulator gpio property
	drivers: soc: ti: knav_qmss_queue: Mark knav_acc_firmwares as static
	soc: qcom: llcc: make irq truly optional
	soc: qcom: apr: make code more reuseable
	soc: qcom: apr: Add check for idr_alloc and of_property_read_string_index
	arm: dts: spear600: Fix clcd interrupt
	soc: ti: knav_qmss_queue: Use pm_runtime_resume_and_get instead of pm_runtime_get_sync
	soc: ti: knav_qmss_queue: Fix PM disable depth imbalance in knav_queue_probe
	soc: ti: smartreflex: Fix PM disable depth imbalance in omap_sr_probe
	perf: arm_dsu: Fix hotplug callback leak in dsu_pmu_init()
	perf/smmuv3: Fix hotplug callback leak in arm_smmu_pmu_init()
	arm64: dts: ti: k3-am65-main: Drop dma-coherent in crypto node
	arm64: dts: ti: k3-j721e-main: Drop dma-coherent in crypto node
	arm64: dts: mt2712e: Fix unit_address_vs_reg warning for oscillators
	arm64: dts: mt2712e: Fix unit address for pinctrl node
	arm64: dts: mt2712-evb: Fix vproc fixed regulators unit names
	arm64: dts: mt2712-evb: Fix usb vbus regulators unit names
	arm64: dts: mediatek: pumpkin-common: Fix devicetree warnings
	arm64: dts: mediatek: mt6797: Fix 26M oscillator unit name
	ARM: dts: dove: Fix assigned-addresses for every PCIe Root Port
	ARM: dts: armada-370: Fix assigned-addresses for every PCIe Root Port
	ARM: dts: armada-xp: Fix assigned-addresses for every PCIe Root Port
	ARM: dts: armada-375: Fix assigned-addresses for every PCIe Root Port
	ARM: dts: armada-38x: Fix assigned-addresses for every PCIe Root Port
	ARM: dts: armada-39x: Fix assigned-addresses for every PCIe Root Port
	ARM: dts: turris-omnia: Add ethernet aliases
	ARM: dts: turris-omnia: Add switch port 6 node
	arm64: dts: armada-3720-turris-mox: Add missing interrupt for RTC
	pstore/ram: Fix error return code in ramoops_probe()
	ARM: mmp: fix timer_read delay
	pstore: Avoid kcore oops by vmap()ing with VM_IOREMAP
	tpm/tpm_ftpm_tee: Fix error handling in ftpm_mod_init()
	tpm/tpm_crb: Fix error message in __crb_relinquish_locality()
	sched/fair: Cleanup task_util and capacity type
	sched/uclamp: Fix relationship between uclamp and migration margin
	cpuidle: dt: Return the correct numbers of parsed idle states
	alpha: fix syscall entry in !AUDUT_SYSCALL case
	PM: hibernate: Fix mistake in kerneldoc comment
	fs: don't audit the capability check in simple_xattr_list()
	cpufreq: qcom-hw: Fix memory leak in qcom_cpufreq_hw_read_lut()
	selftests/ftrace: event_triggers: wait longer for test_event_enable
	perf: Fix possible memleak in pmu_dev_alloc()
	lib/debugobjects: fix stat count and optimize debug_objects_mem_init
	platform/x86: huawei-wmi: fix return value calculation
	timerqueue: Use rb_entry_safe() in timerqueue_getnext()
	proc: fixup uptime selftest
	lib/fonts: fix undefined behavior in bit shift for get_default_font
	ocfs2: fix memory leak in ocfs2_stack_glue_init()
	MIPS: vpe-mt: fix possible memory leak while module exiting
	MIPS: vpe-cmp: fix possible memory leak while module exiting
	selftests/efivarfs: Add checking of the test return value
	PNP: fix name memory leak in pnp_alloc_dev()
	perf/x86/intel/uncore: Fix reference count leak in hswep_has_limit_sbox()
	perf/x86/intel/uncore: Fix reference count leak in snr_uncore_mmio_map()
	perf/x86/intel/uncore: Fix reference count leak in __uncore_imc_init_box()
	platform/chrome: cros_usbpd_notify: Fix error handling in cros_usbpd_notify_init()
	irqchip: gic-pm: Use pm_runtime_resume_and_get() in gic_probe()
	EDAC/i10nm: fix refcount leak in pci_get_dev_wrapper()
	nfsd: don't call nfsd_file_put from client states seqfile display
	genirq/irqdesc: Don't try to remove non-existing sysfs files
	cpufreq: amd_freq_sensitivity: Add missing pci_dev_put()
	libfs: add DEFINE_SIMPLE_ATTRIBUTE_SIGNED for signed value
	lib/notifier-error-inject: fix error when writing -errno to debugfs file
	docs: fault-injection: fix non-working usage of negative values
	debugfs: fix error when writing negative value to atomic_t debugfs file
	ocfs2: ocfs2_mount_volume does cleanup job before return error
	ocfs2: rewrite error handling of ocfs2_fill_super
	ocfs2: fix memory leak in ocfs2_mount_volume()
	rapidio: fix possible name leaks when rio_add_device() fails
	rapidio: rio: fix possible name leak in rio_register_mport()
	clocksource/drivers/sh_cmt: Make sure channel clock supply is enabled
	clocksource/drivers/sh_cmt: Access registers according to spec
	futex: Move to kernel/futex/
	futex: Resend potentially swallowed owner death notification
	cpu/hotplug: Make target_store() a nop when target == state
	clocksource/drivers/timer-ti-dm: Fix missing clk_disable_unprepare in dmtimer_systimer_init_clock()
	ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage()
	uprobes/x86: Allow to probe a NOP instruction with 0x66 prefix
	x86/xen: Fix memory leak in xen_smp_intr_init{_pv}()
	x86/xen: Fix memory leak in xen_init_lock_cpu()
	xen/privcmd: Fix a possible warning in privcmd_ioctl_mmap_resource()
	PM: runtime: Improve path in rpm_idle() when no callback
	PM: runtime: Do not call __rpm_callback() from rpm_idle()
	platform/x86: mxm-wmi: fix memleak in mxm_wmi_call_mx[ds|mx]()
	platform/x86: intel_scu_ipc: fix possible name leak in __intel_scu_ipc_register()
	MIPS: BCM63xx: Add check for NULL for clk in clk_enable
	MIPS: OCTEON: warn only once if deprecated link status is being used
	fs: sysv: Fix sysv_nblocks() returns wrong value
	rapidio: fix possible UAF when kfifo_alloc() fails
	eventfd: change int to __u64 in eventfd_signal() ifndef CONFIG_EVENTFD
	relay: fix type mismatch when allocating memory in relay_create_buf()
	hfs: Fix OOB Write in hfs_asc2mac
	rapidio: devices: fix missing put_device in mport_cdev_open
	wifi: ath9k: hif_usb: fix memory leak of urbs in ath9k_hif_usb_dealloc_tx_urbs()
	wifi: ath9k: hif_usb: Fix use-after-free in ath9k_hif_usb_reg_in_cb()
	wifi: rtl8xxxu: Fix reading the vendor of combo chips
	drm/bridge: adv7533: remove dynamic lane switching from adv7533 bridge
	libbpf: Fix use-after-free in btf_dump_name_dups
	libbpf: Fix null-pointer dereference in find_prog_by_sec_insn()
	pata_ipx4xx_cf: Fix unsigned comparison with less than zero
	media: coda: jpeg: Add check for kmalloc
	media: i2c: ad5820: Fix error path
	venus: pm_helpers: Fix error check in vcodec_domains_get()
	media: exynos4-is: Use v4l2_async_notifier_add_fwnode_remote_subdev
	media: exynos4-is: don't rely on the v4l2_async_subdev internals
	can: kvaser_usb: do not increase tx statistics when sending error message frames
	can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device
	can: kvaser_usb: kvaser_usb_leaf: Rename {leaf,usbcan}_cmd_error_event to {leaf,usbcan}_cmd_can_error_event
	can: kvaser_usb: kvaser_usb_leaf: Handle CMD_ERROR_EVENT
	can: kvaser_usb_leaf: Set Warning state even without bus errors
	can: kvaser_usb_leaf: Fix improved state not being reported
	can: kvaser_usb_leaf: Fix wrong CAN state after stopping
	can: kvaser_usb_leaf: Fix bogus restart events
	can: kvaser_usb: Add struct kvaser_usb_busparams
	can: kvaser_usb: Compare requested bittiming parameters with actual parameters in do_set_{,data}_bittiming
	drm/rockchip: lvds: fix PM usage counter unbalance in poweron
	clk: renesas: r9a06g032: Repair grave increment error
	spi: Update reference to struct spi_controller
	drm/panel/panel-sitronix-st7701: Remove panel on DSI attach failure
	ima: Fix fall-through warnings for Clang
	ima: Handle -ESTALE returned by ima_filter_rule_match()
	drm/msm/hdmi: switch to drm_bridge_connector
	drm/msm/hdmi: drop unused GPIO support
	bpf: Fix slot type check in check_stack_write_var_off
	media: vivid: fix compose size exceed boundary
	media: platform: exynos4-is: fix return value check in fimc_md_probe()
	bpf: propagate precision in ALU/ALU64 operations
	bpf: Check the other end of slot_type for STACK_SPILL
	bpf: propagate precision across all frames, not just the last one
	clk: qcom: gcc-sm8250: Use retention mode for USB GDSCs
	mtd: Fix device name leak when register device failed in add_mtd_device()
	Input: joystick - fix Kconfig warning for JOYSTICK_ADC
	wifi: rsi: Fix handling of 802.3 EAPOL frames sent via control port
	media: camss: Clean up received buffers on failed start of streaming
	net, proc: Provide PROC_FS=n fallback for proc_create_net_single_write()
	rxrpc: Fix ack.bufferSize to be 0 when generating an ack
	drm/radeon: Add the missed acpi_put_table() to fix memory leak
	drm/mediatek: Modify dpi power on/off sequence.
	ASoC: pxa: fix null-pointer dereference in filter()
	regulator: core: fix unbalanced of node refcount in regulator_dev_lookup()
	amdgpu/pm: prevent array underflow in vega20_odn_edit_dpm_table()
	drm/fourcc: Add packed 10bit YUV 4:2:0 format
	drm/fourcc: Fix vsub/hsub for Q410 and Q401
	integrity: Fix memory leakage in keyring allocation error path
	ima: Fix misuse of dereference of pointer in template_desc_init_fields()
	wifi: ath10k: Fix return value in ath10k_pci_init()
	mtd: lpddr2_nvm: Fix possible null-ptr-deref
	Input: elants_i2c - properly handle the reset GPIO when power is off
	media: vidtv: Fix use-after-free in vidtv_bridge_dvb_init()
	media: solo6x10: fix possible memory leak in solo_sysfs_init()
	media: platform: exynos4-is: Fix error handling in fimc_md_init()
	media: videobuf-dma-contig: use dma_mmap_coherent
	inet: add READ_ONCE(sk->sk_bound_dev_if) in inet_csk_bind_conflict()
	bpf: Move skb->len == 0 checks into __bpf_redirect
	HID: hid-sensor-custom: set fixed size for custom attributes
	ALSA: pcm: fix undefined behavior in bit shift for SNDRV_PCM_RATE_KNOT
	ALSA: seq: fix undefined behavior in bit shift for SNDRV_SEQ_FILTER_USE_EVENT
	regulator: core: use kfree_const() to free space conditionally
	clk: rockchip: Fix memory leak in rockchip_clk_register_pll()
	drm/amdgpu: fix pci device refcount leak
	bonding: fix link recovery in mode 2 when updelay is nonzero
	mtd: maps: pxa2xx-flash: fix memory leak in probe
	drbd: fix an invalid memory access caused by incorrect use of list iterator
	ASoC: qcom: Add checks for devm_kcalloc
	media: vimc: Fix wrong function called when vimc_init() fails
	media: imon: fix a race condition in send_packet()
	clk: imx: replace osc_hdmi with dummy
	pinctrl: pinconf-generic: add missing of_node_put()
	media: dvb-core: Fix ignored return value in dvb_register_frontend()
	media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()
	media: s5p-mfc: Add variant data for MFC v7 hardware for Exynos 3250 SoC
	drm/tegra: Add missing clk_disable_unprepare() in tegra_dc_probe()
	ASoC: dt-bindings: wcd9335: fix reset line polarity in example
	ASoC: mediatek: mtk-btcvsd: Add checks for write and read of mtk_btcvsd_snd
	NFSv4.2: Clear FATTR4_WORD2_SECURITY_LABEL when done decoding
	NFSv4.2: Fix a memory stomp in decode_attr_security_label
	NFSv4.2: Fix initialisation of struct nfs4_label
	NFSv4: Fix a deadlock between nfs4_open_recover_helper() and delegreturn
	NFS: Fix an Oops in nfs_d_automount()
	ALSA: asihpi: fix missing pci_disable_device()
	wifi: iwlwifi: mvm: fix double free on tx path.
	ASoC: mediatek: mt8173: Fix debugfs registration for components
	ASoC: mediatek: mt8173: Enable IRQ when pdata is ready
	drm/amd/pm/smu11: BACO is supported when it's in BACO state
	drm/radeon: Fix PCI device refcount leak in radeon_atrm_get_bios()
	drm/amdgpu: Fix PCI device refcount leak in amdgpu_atrm_get_bios()
	ASoC: pcm512x: Fix PM disable depth imbalance in pcm512x_probe
	netfilter: conntrack: set icmpv6 redirects as RELATED
	bpf, sockmap: Fix repeated calls to sock_put() when msg has more_data
	bpf, sockmap: Fix data loss caused by using apply_bytes on ingress redirect
	bonding: uninitialized variable in bond_miimon_inspect()
	spi: spidev: mask SPI_CS_HIGH in SPI_IOC_RD_MODE
	wifi: mac80211: fix memory leak in ieee80211_if_add()
	wifi: cfg80211: Fix not unregister reg_pdev when load_builtin_regdb_keys() fails
	wifi: mt76: fix coverity overrun-call in mt76_get_txpower()
	regulator: core: fix module refcount leak in set_supply()
	clk: qcom: clk-krait: fix wrong div2 functions
	hsr: Add a rcu-read lock to hsr_forward_skb().
	net: hsr: generate supervision frame without HSR/PRP tag
	hsr: Disable netpoll.
	hsr: Synchronize sending frames to have always incremented outgoing seq nr.
	hsr: Synchronize sequence number updates.
	configfs: fix possible memory leak in configfs_create_dir()
	regulator: core: fix resource leak in regulator_register()
	hwmon: (jc42) Convert register access and caching to regmap/regcache
	hwmon: (jc42) Restore the min/max/critical temperatures on resume
	bpf, sockmap: fix race in sock_map_free()
	ALSA: pcm: Set missing stop_operating flag at undoing trigger start
	media: saa7164: fix missing pci_disable_device()
	ALSA: mts64: fix possible null-ptr-defer in snd_mts64_interrupt
	xprtrdma: Fix regbuf data not freed in rpcrdma_req_create()
	SUNRPC: Fix missing release socket in rpc_sockname()
	NFSv4.x: Fail client initialisation if state manager thread can't run
	mmc: alcor: fix return value check of mmc_add_host()
	mmc: moxart: fix return value check of mmc_add_host()
	mmc: mxcmmc: fix return value check of mmc_add_host()
	mmc: pxamci: fix return value check of mmc_add_host()
	mmc: rtsx_usb_sdmmc: fix return value check of mmc_add_host()
	mmc: toshsd: fix return value check of mmc_add_host()
	mmc: vub300: fix return value check of mmc_add_host()
	mmc: wmt-sdmmc: fix return value check of mmc_add_host()
	mmc: atmel-mci: fix return value check of mmc_add_host()
	mmc: omap_hsmmc: fix return value check of mmc_add_host()
	mmc: meson-gx: fix return value check of mmc_add_host()
	mmc: via-sdmmc: fix return value check of mmc_add_host()
	mmc: wbsd: fix return value check of mmc_add_host()
	mmc: mmci: fix return value check of mmc_add_host()
	media: c8sectpfe: Add of_node_put() when breaking out of loop
	media: coda: Add check for dcoda_iram_alloc
	media: coda: Add check for kmalloc
	clk: samsung: Fix memory leak in _samsung_clk_register_pll()
	spi: spi-gpio: Don't set MOSI as an input if not 3WIRE mode
	wifi: rtl8xxxu: Add __packed to struct rtl8723bu_c2h
	wifi: rtl8xxxu: Fix the channel width reporting
	wifi: brcmfmac: Fix error return code in brcmf_sdio_download_firmware()
	blktrace: Fix output non-blktrace event when blk_classic option enabled
	clk: socfpga: clk-pll: Remove unused variable 'rc'
	clk: socfpga: use clk_hw_register for a5/c5
	clk: socfpga: Fix memory leak in socfpga_gate_init()
	net: vmw_vsock: vmci: Check memcpy_from_msg()
	net: defxx: Fix missing err handling in dfx_init()
	net: stmmac: selftests: fix potential memleak in stmmac_test_arpoffload()
	drivers: net: qlcnic: Fix potential memory leak in qlcnic_sriov_init()
	of: overlay: fix null pointer dereferencing in find_dup_cset_node_entry() and find_dup_cset_prop()
	ethernet: s2io: don't call dev_kfree_skb() under spin_lock_irqsave()
	net: farsync: Fix kmemleak when rmmods farsync
	net/tunnel: wait until all sk_user_data reader finish before releasing the sock
	net: apple: mace: don't call dev_kfree_skb() under spin_lock_irqsave()
	net: apple: bmac: don't call dev_kfree_skb() under spin_lock_irqsave()
	net: emaclite: don't call dev_kfree_skb() under spin_lock_irqsave()
	net: ethernet: dnet: don't call dev_kfree_skb() under spin_lock_irqsave()
	hamradio: don't call dev_kfree_skb() under spin_lock_irqsave()
	net: amd: lance: don't call dev_kfree_skb() under spin_lock_irqsave()
	net: amd-xgbe: Fix logic around active and passive cables
	net: amd-xgbe: Check only the minimum speed for active/passive cables
	can: tcan4x5x: Remove invalid write in clear_interrupts
	net: lan9303: Fix read error execution path
	ntb_netdev: Use dev_kfree_skb_any() in interrupt context
	sctp: sysctl: make extra pointers netns aware
	Bluetooth: btusb: don't call kfree_skb() under spin_lock_irqsave()
	Bluetooth: hci_qca: don't call kfree_skb() under spin_lock_irqsave()
	Bluetooth: hci_ll: don't call kfree_skb() under spin_lock_irqsave()
	Bluetooth: hci_h5: don't call kfree_skb() under spin_lock_irqsave()
	Bluetooth: hci_bcsp: don't call kfree_skb() under spin_lock_irqsave()
	Bluetooth: hci_core: don't call kfree_skb() under spin_lock_irqsave()
	Bluetooth: RFCOMM: don't call kfree_skb() under spin_lock_irqsave()
	stmmac: fix potential division by 0
	apparmor: fix a memleak in multi_transaction_new()
	apparmor: fix lockdep warning when removing a namespace
	apparmor: Fix abi check to include v8 abi
	crypto: sun8i-ss - use dma_addr instead u32
	crypto: nitrox - avoid double free on error path in nitrox_sriov_init()
	scsi: core: Fix a race between scsi_done() and scsi_timeout()
	apparmor: Use pointer to struct aa_label for lbs_cred
	PCI: dwc: Fix n_fts[] array overrun
	RDMA/core: Fix order of nldev_exit call
	PCI: pci-epf-test: Register notifier if only core_init_notifier is enabled
	f2fs: Fix the race condition of resize flag between resizefs
	crypto: rockchip - do not do custom power management
	crypto: rockchip - do not store mode globally
	crypto: rockchip - add fallback for cipher
	crypto: rockchip - add fallback for ahash
	crypto: rockchip - better handle cipher key
	crypto: rockchip - remove non-aligned handling
	crypto: rockchip - delete unneeded variable initialization
	crypto: rockchip - rework by using crypto_engine
	apparmor: Fix memleak in alloc_ns()
	f2fs: fix normal discard process
	RDMA/siw: Fix immediate work request flush to completion queue
	RDMA/nldev: Return "-EAGAIN" if the cm_id isn't from expected port
	RDMA/siw: Set defined status for work completion with undefined status
	scsi: scsi_debug: Fix a warning in resp_write_scat()
	crypto: ccree - Remove debugfs when platform_driver_register failed
	crypto: cryptd - Use request context instead of stack for sub-request
	crypto: hisilicon/qm - add missing pci_dev_put() in q_num_set()
	RDMA/hns: Repacing 'dseg_len' by macros in fill_ext_sge_inl_data()
	RDMA/hns: Fix ext_sge num error when post send
	PCI: Check for alloc failure in pci_request_irq()
	RDMA/hfi: Decrease PCI device reference count in error path
	crypto: ccree - Make cc_debugfs_global_fini() available for module init function
	RDMA/hns: fix memory leak in hns_roce_alloc_mr()
	RDMA/rxe: Fix NULL-ptr-deref in rxe_qp_do_cleanup() when socket create failed
	scsi: hpsa: Fix possible memory leak in hpsa_init_one()
	crypto: tcrypt - Fix multibuffer skcipher speed test mem leak
	padata: Always leave BHs disabled when running ->parallel()
	padata: Fix list iterator in padata_do_serial()
	scsi: mpt3sas: Fix possible resource leaks in mpt3sas_transport_port_add()
	scsi: hpsa: Fix error handling in hpsa_add_sas_host()
	scsi: hpsa: Fix possible memory leak in hpsa_add_sas_device()
	scsi: scsi_debug: Fix a warning in resp_verify()
	scsi: scsi_debug: Fix a warning in resp_report_zones()
	scsi: fcoe: Fix possible name leak when device_register() fails
	scsi: scsi_debug: Fix possible name leak in sdebug_add_host_helper()
	scsi: ipr: Fix WARNING in ipr_init()
	scsi: fcoe: Fix transport not deattached when fcoe_if_init() fails
	scsi: snic: Fix possible UAF in snic_tgt_create()
	RDMA/nldev: Add checks for nla_nest_start() in fill_stat_counter_qps()
	f2fs: avoid victim selection from previous victim section
	RDMA/nldev: Fix failure to send large messages
	crypto: amlogic - Remove kcalloc without check
	crypto: omap-sham - Use pm_runtime_resume_and_get() in omap_sham_probe()
	riscv/mm: add arch hook arch_clear_hugepage_flags
	RDMA/hfi1: Fix error return code in parse_platform_config()
	RDMA/srp: Fix error return code in srp_parse_options()
	orangefs: Fix sysfs not cleanup when dev init failed
	RDMA/hns: Fix PBL page MTR find
	RDMA/hns: Fix page size cap from firmware
	crypto: img-hash - Fix variable dereferenced before check 'hdev->req'
	hwrng: amd - Fix PCI device refcount leak
	hwrng: geode - Fix PCI device refcount leak
	IB/IPoIB: Fix queue count inconsistency for PKEY child interfaces
	drivers: dio: fix possible memory leak in dio_init()
	serial: tegra: Read DMA status before terminating
	class: fix possible memory leak in __class_register()
	vfio: platform: Do not pass return buffer to ACPI _RST method
	uio: uio_dmem_genirq: Fix missing unlock in irq configuration
	uio: uio_dmem_genirq: Fix deadlock between irq config and handling
	usb: fotg210-udc: Fix ages old endianness issues
	staging: vme_user: Fix possible UAF in tsi148_dma_list_add
	usb: typec: Check for ops->exit instead of ops->enter in altmode_exit
	usb: typec: tcpci: fix of node refcount leak in tcpci_register_port()
	usb: typec: tipd: Fix spurious fwnode_handle_put in error path
	serial: amba-pl011: avoid SBSA UART accessing DMACR register
	serial: pl011: Do not clear RX FIFO & RX interrupt in unthrottle.
	serial: pch: Fix PCI device refcount leak in pch_request_dma()
	tty: serial: clean up stop-tx part in altera_uart_tx_chars()
	tty: serial: altera_uart_{r,t}x_chars() need only uart_port
	serial: altera_uart: fix locking in polling mode
	serial: sunsab: Fix error handling in sunsab_init()
	test_firmware: fix memory leak in test_firmware_init()
	misc: ocxl: fix possible name leak in ocxl_file_register_afu()
	ocxl: fix pci device refcount leak when calling get_function_0()
	misc: tifm: fix possible memory leak in tifm_7xx1_switch_media()
	misc: sgi-gru: fix use-after-free error in gru_set_context_option, gru_fault and gru_handle_user_call_os
	firmware: raspberrypi: fix possible memory leak in rpi_firmware_probe()
	cxl: fix possible null-ptr-deref in cxl_guest_init_afu|adapter()
	cxl: fix possible null-ptr-deref in cxl_pci_init_afu|adapter()
	iio: temperature: ltc2983: make bulk write buffer DMA-safe
	genirq: Add IRQF_NO_AUTOEN for request_irq/nmi()
	iio:imu:adis: Use IRQF_NO_AUTOEN instead of irq request then disable
	iio: adis: handle devices that cannot unmask the drdy pin
	iio: adis: stylistic changes
	iio:imu:adis: Move exports into IIO_ADISLIB namespace
	iio: adis: add '__adis_enable_irq()' implementation
	counter: stm32-lptimer-cnt: fix the check on arr and cmp registers update
	usb: roles: fix of node refcount leak in usb_role_switch_is_parent()
	usb: gadget: f_hid: optional SETUP/SET_REPORT mode
	usb: gadget: f_hid: fix f_hidg lifetime vs cdev
	usb: gadget: f_hid: fix refcount leak on error path
	drivers: mcb: fix resource leak in mcb_probe()
	mcb: mcb-parse: fix error handing in chameleon_parse_gdd()
	chardev: fix error handling in cdev_device_add()
	i2c: pxa-pci: fix missing pci_disable_device() on error in ce4100_i2c_probe
	staging: rtl8192u: Fix use after free in ieee80211_rx()
	staging: rtl8192e: Fix potential use-after-free in rtllib_rx_Monitor()
	vme: Fix error not catched in fake_init()
	gpiolib: Get rid of redundant 'else'
	gpiolib: cdev: fix NULL-pointer dereferences
	i2c: mux: reg: check return value after calling platform_get_resource()
	i2c: ismt: Fix an out-of-bounds bug in ismt_access()
	usb: storage: Add check for kcalloc
	tracing/hist: Fix issue of losting command info in error_log
	samples: vfio-mdev: Fix missing pci_disable_device() in mdpy_fb_probe()
	thermal/drivers/imx8mm_thermal: Validate temperature range
	fbdev: ssd1307fb: Drop optional dependency
	fbdev: pm2fb: fix missing pci_disable_device()
	fbdev: via: Fix error in via_core_init()
	fbdev: vermilion: decrease reference count in error path
	fbdev: uvesafb: Fixes an error handling path in uvesafb_probe()
	HSI: omap_ssi_core: fix unbalanced pm_runtime_disable()
	HSI: omap_ssi_core: fix possible memory leak in ssi_probe()
	power: supply: fix residue sysfs file in error handle route of __power_supply_register()
	perf trace: Return error if a system call doesn't exist
	perf trace: Use macro RAW_SYSCALL_ARGS_NUM to replace number
	perf trace: Handle failure when trace point folder is missed
	perf symbol: correction while adjusting symbol
	HSI: omap_ssi_core: Fix error handling in ssi_init()
	power: supply: fix null pointer dereferencing in power_supply_get_battery_info
	RDMA/siw: Fix pointer cast warning
	iommu/sun50i: Fix reset release
	iommu/sun50i: Consider all fault sources for reset
	iommu/sun50i: Fix R/W permission check
	iommu/sun50i: Fix flush size
	phy: usb: s2 WoL wakeup_count not incremented for USB->Eth devices
	include/uapi/linux/swab: Fix potentially missing __always_inline
	pwm: tegra: Improve required rate calculation
	dmaengine: idxd: Fix crc_val field for completion record
	rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0
	rtc: cmos: Fix event handler registration ordering issue
	rtc: cmos: Fix wake alarm breakage
	rtc: cmos: fix build on non-ACPI platforms
	rtc: cmos: Call cmos_wake_setup() from cmos_do_probe()
	rtc: cmos: Call rtc_wake_setup() from cmos_do_probe()
	rtc: cmos: Eliminate forward declarations of some functions
	rtc: cmos: Rename ACPI-related functions
	rtc: cmos: Disable ACPI RTC event on removal
	rtc: snvs: Allow a time difference on clock register read
	rtc: pcf85063: Fix reading alarm
	iommu/amd: Fix pci device refcount leak in ppr_notifier()
	iommu/fsl_pamu: Fix resource leak in fsl_pamu_probe()
	macintosh: fix possible memory leak in macio_add_one_device()
	macintosh/macio-adb: check the return value of ioremap()
	powerpc/52xx: Fix a resource leak in an error handling path
	cxl: Fix refcount leak in cxl_calc_capp_routing
	powerpc/xmon: Enable breakpoints on 8xx
	powerpc/xmon: Fix -Wswitch-unreachable warning in bpt_cmds
	powerpc/xive: add missing iounmap() in error path in xive_spapr_populate_irq_data()
	kbuild: remove unneeded mkdir for external modules_install
	kbuild: unify modules(_install) for in-tree and external modules
	kbuild: refactor single builds of *.ko
	powerpc/perf: callchain validate kernel stack pointer bounds
	powerpc/83xx/mpc832x_rdb: call platform_device_put() in error case in of_fsl_spi_probe()
	powerpc/hv-gpci: Fix hv_gpci event list
	selftests/powerpc: Fix resource leaks
	iommu/sun50i: Remove IOMMU_DOMAIN_IDENTITY
	pwm: sifive: Call pwm_sifive_update_clock() while mutex is held
	remoteproc: sysmon: fix memory leak in qcom_add_sysmon_subdev()
	remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove
	remoteproc: qcom_q6v5_pas: detach power domains on remove
	remoteproc: qcom_q6v5_pas: Fix missing of_node_put() in adsp_alloc_memory_region()
	powerpc/eeh: Drop redundant spinlock initialization
	powerpc/pseries/eeh: use correct API for error log size
	netfilter: flowtable: really fix NAT IPv6 offload
	rtc: st-lpc: Add missing clk_disable_unprepare in st_rtc_probe()
	rtc: pic32: Move devm_rtc_allocate_device earlier in pic32_rtc_probe()
	rtc: pcf85063: fix pcf85063_clkout_control
	NFSD: Remove spurious cb_setup_err tracepoint
	nfsd: under NFSv4.1, fix double svc_xprt_put on rpc_create failure
	net: macsec: fix net device access prior to holding a lock
	mISDN: hfcsusb: don't call dev_kfree_skb/kfree_skb() under spin_lock_irqsave()
	mISDN: hfcpci: don't call dev_kfree_skb/kfree_skb() under spin_lock_irqsave()
	mISDN: hfcmulti: don't call dev_kfree_skb/kfree_skb() under spin_lock_irqsave()
	nfc: pn533: Clear nfc_target before being used
	r6040: Fix kmemleak in probe and remove
	net: switch to storing KCOV handle directly in sk_buff
	net: add inline function skb_csum_is_sctp
	net: igc: use skb_csum_is_sctp instead of protocol check
	net: add a helper to avoid issues with HW TX timestamping and SO_TXTIME
	igc: Enhance Qbv scheduling by using first flag bit
	igc: Use strict cycles for Qbv scheduling
	igc: Add checking for basetime less than zero
	igc: recalculate Qbv end_time by considering cycle time
	igc: Lift TAPRIO schedule restriction
	igc: Set Qbv start_time and end_time to end_time if not being configured in GCL
	rtc: mxc_v2: Add missing clk_disable_unprepare()
	selftests: devlink: fix the fd redirect in dummy_reporter_test
	openvswitch: Fix flow lookup to use unmasked key
	skbuff: Account for tail adjustment during pull operations
	mailbox: zynq-ipi: fix error handling while device_register() fails
	net_sched: reject TCF_EM_SIMPLE case for complex ematch module
	rxrpc: Fix missing unlock in rxrpc_do_sendmsg()
	myri10ge: Fix an error handling path in myri10ge_probe()
	net: stream: purge sk_error_queue in sk_stream_kill_queues()
	rcu: Fix __this_cpu_read() lockdep warning in rcu_force_quiescent_state()
	arm64: make is_ttbrX_addr() noinstr-safe
	video: hyperv_fb: Avoid taking busy spinlock on panic path
	x86/hyperv: Remove unregister syscore call from Hyper-V cleanup
	binfmt_misc: fix shift-out-of-bounds in check_special_flags
	fs: jfs: fix shift-out-of-bounds in dbAllocAG
	udf: Avoid double brelse() in udf_rename()
	fs: jfs: fix shift-out-of-bounds in dbDiscardAG
	ACPICA: Fix error code path in acpi_ds_call_control_method()
	nilfs2: fix shift-out-of-bounds/overflow in nilfs_sb2_bad_offset()
	nilfs2: fix shift-out-of-bounds due to too large exponent of block size
	acct: fix potential integer overflow in encode_comp_t()
	hfs: fix OOB Read in __hfs_brec_find
	drm/etnaviv: add missing quirks for GC300
	brcmfmac: return error when getting invalid max_flowrings from dongle
	wifi: ath9k: verify the expected usb_endpoints are present
	wifi: ar5523: Fix use-after-free on ar5523_cmd() timed out
	ASoC: codecs: rt298: Add quirk for KBL-R RVP platform
	ipmi: fix memleak when unload ipmi driver
	drm/amd/display: prevent memory leak
	qed (gcc13): use u16 for fid to be big enough
	bpf: make sure skb->len != 0 when redirecting to a tunneling device
	net: ethernet: ti: Fix return type of netcp_ndo_start_xmit()
	hamradio: baycom_epp: Fix return type of baycom_send_packet()
	wifi: brcmfmac: Fix potential shift-out-of-bounds in brcmf_fw_alloc_request()
	igb: Do not free q_vector unless new one was allocated
	drm/amdgpu: Fix type of second parameter in trans_msg() callback
	drm/amdgpu: Fix type of second parameter in odn_edit_dpm_table() callback
	s390/ctcm: Fix return type of ctc{mp,}m_tx()
	s390/netiucv: Fix return type of netiucv_tx()
	s390/lcs: Fix return type of lcs_start_xmit()
	drm/msm: Use drm_mode_copy()
	drm/rockchip: Use drm_mode_copy()
	drm/sti: Use drm_mode_copy()
	drivers/md/md-bitmap: check the return value of md_bitmap_get_counter()
	md/raid1: stop mdx_raid1 thread when raid1 array run failed
	drm/amd/display: fix array index out of bound error in bios parser
	net: add atomic_long_t to net_device_stats fields
	mrp: introduce active flags to prevent UAF when applicant uninit
	ppp: associate skb with a device at tx
	bpf: Prevent decl_tag from being referenced in func_proto arg
	ethtool: avoiding integer overflow in ethtool_phys_id()
	media: dvb-frontends: fix leak of memory fw
	media: dvbdev: adopts refcnt to avoid UAF
	media: dvb-usb: fix memory leak in dvb_usb_adapter_init()
	blk-mq: fix possible memleak when register 'hctx' failed
	libbpf: Avoid enum forward-declarations in public API in C++ mode
	regulator: core: fix use_count leakage when handling boot-on
	mmc: f-sdh30: Add quirks for broken timeout clock capability
	mmc: renesas_sdhi: better reset from HS400 mode
	media: si470x: Fix use-after-free in si470x_int_in_callback()
	clk: st: Fix memory leak in st_of_quadfs_setup()
	hugetlbfs: fix null-ptr-deref in hugetlbfs_parse_param()
	drm/fsl-dcu: Fix return type of fsl_dcu_drm_connector_mode_valid()
	drm/sti: Fix return type of sti_{dvo,hda,hdmi}_connector_mode_valid()
	orangefs: Fix kmemleak in orangefs_prepare_debugfs_help_string()
	orangefs: Fix kmemleak in orangefs_{kernel,client}_debug_init()
	hwmon: (jc42) Fix missing unlock on error in jc42_write()
	ALSA/ASoC: hda: move/rename snd_hdac_ext_stop_streams to hdac_stream.c
	ALSA: hda: add snd_hdac_stop_streams() helper
	ASoC: Intel: Skylake: Fix driver hang during shutdown
	ASoC: mediatek: mt8173-rt5650-rt5514: fix refcount leak in mt8173_rt5650_rt5514_dev_probe()
	ASoC: audio-graph-card: fix refcount leak of cpu_ep in __graph_for_each_link()
	ASoC: rockchip: pdm: Add missing clk_disable_unprepare() in rockchip_pdm_runtime_resume()
	ASoC: wm8994: Fix potential deadlock
	ASoC: rockchip: spdif: Add missing clk_disable_unprepare() in rk_spdif_runtime_resume()
	ASoC: rt5670: Remove unbalanced pm_runtime_put()
	LoadPin: Ignore the "contents" argument of the LSM hooks
	pstore: Switch pmsg_lock to an rt_mutex to avoid priority inversion
	perf debug: Set debug_peo_args and redirect_to_stderr variable to correct values in perf_quiet_option()
	afs: Fix lost servers_outstanding count
	pstore: Make sure CONFIG_PSTORE_PMSG selects CONFIG_RT_MUTEXES
	ima: Simplify ima_lsm_copy_rule
	ALSA: usb-audio: add the quirk for KT0206 device
	ALSA: hda/realtek: Add quirk for Lenovo TianYi510Pro-14IOB
	ALSA: hda/hdmi: Add HP Device 0x8711 to force connect list
	usb: dwc3: Fix race between dwc3_set_mode and __dwc3_set_mode
	usb: dwc3: core: defer probe on ulpi_read_id timeout
	HID: wacom: Ensure bootloader PID is usable in hidraw mode
	HID: mcp2221: don't connect hidraw
	reiserfs: Add missing calls to reiserfs_security_free()
	iio: adc: ad_sigma_delta: do not use internal iio_dev lock
	iio: adc128s052: add proper .data members in adc128_of_match table
	regulator: core: fix deadlock on regulator enable
	gcov: add support for checksum field
	ovl: fix use inode directly in rcu-walk mode
	media: dvbdev: fix build warning due to comments
	media: dvbdev: fix refcnt bug
	pwm: tegra: Fix 32 bit build
	usb: dwc3: qcom: Fix memory leak in dwc3_qcom_interconnect_init
	cifs: fix oops during encryption
	nvme-pci: fix doorbell buffer value endianness
	nvme-pci: fix mempool alloc size
	nvme-pci: fix page size checks
	ata: ahci: Fix PCS quirk application for suspend
	nvme: fix the NVME_CMD_EFFECTS_CSE_MASK definition
	nvmet: don't defer passthrough commands with trivial effects to the workqueue
	objtool: Fix SEGFAULT
	powerpc/rtas: avoid device tree lookups in rtas_os_term()
	powerpc/rtas: avoid scheduling in rtas_os_term()
	HID: multitouch: fix Asus ExpertBook P2 P2451FA trackpoint
	HID: plantronics: Additional PIDs for double volume key presses quirk
	pstore/zone: Use GFP_ATOMIC to allocate zone buffer
	hfsplus: fix bug causing custom uid and gid being unable to be assigned with mount
	binfmt: Fix error return code in load_elf_fdpic_binary()
	ovl: Use ovl mounter's fsuid and fsgid in ovl_link()
	ALSA: line6: correct midi status byte when receiving data from podxt
	ALSA: line6: fix stack overflow in line6_midi_transmit
	pnode: terminate at peers of source
	md: fix a crash in mempool_free
	mm, compaction: fix fast_isolate_around() to stay within boundaries
	f2fs: should put a page when checking the summary info
	mmc: vub300: fix warning - do not call blocking ops when !TASK_RUNNING
	tpm: acpi: Call acpi_put_table() to fix memory leak
	tpm: tpm_crb: Add the missed acpi_put_table() to fix memory leak
	tpm: tpm_tis: Add the missed acpi_put_table() to fix memory leak
	SUNRPC: Don't leak netobj memory when gss_read_proxy_verf() fails
	kcsan: Instrument memcpy/memset/memmove with newer Clang
	ASoC: Intel/SOF: use set_stream() instead of set_tdm_slots() for HDAudio
	ASoC/SoundWire: dai: expand 'stream' concept beyond SoundWire
	net/mlx5e: Fix nullptr in mlx5e_tc_add_fdb_flow()
	wifi: rtlwifi: remove always-true condition pointed out by GCC 12
	wifi: rtlwifi: 8192de: correct checking of IQK reload
	torture: Exclude "NOHZ tick-stop error" from fatal errors
	rcu: Prevent lockdep-RCU splats on lock acquisition/release
	net/af_packet: add VLAN support for AF_PACKET SOCK_RAW GSO
	net/af_packet: make sure to pull mac header
	media: stv0288: use explicitly signed char
	soc: qcom: Select REMAP_MMIO for LLCC driver
	kest.pl: Fix grub2 menu handling for rebooting
	ktest.pl minconfig: Unset configs instead of just removing them
	jbd2: use the correct print format
	arm64: dts: qcom: sdm845-db845c: correct SPI2 pins drive strength
	mmc: sdhci-sprd: Disable CLK_AUTO when the clock is less than 400K
	btrfs: fix resolving backrefs for inline extent followed by prealloc
	ARM: ux500: do not directly dereference __iomem
	arm64: dts: qcom: sdm850-lenovo-yoga-c630: correct I2C12 pins drive strength
	selftests: Use optional USERCFLAGS and USERLDFLAGS
	PM/devfreq: governor: Add a private governor_data for governor
	cpufreq: Init completion before kobject_init_and_add()
	ALSA: patch_realtek: Fix Dell Inspiron Plus 16
	ALSA: hda/realtek: Apply dual codec fixup for Dell Latitude laptops
	dm cache: Fix ABBA deadlock between shrink_slab and dm_cache_metadata_abort
	dm thin: Fix ABBA deadlock between shrink_slab and dm_pool_abort_metadata
	dm thin: Use last transaction's pmd->root when commit failed
	dm thin: resume even if in FAIL mode
	dm thin: Fix UAF in run_timer_softirq()
	dm integrity: Fix UAF in dm_integrity_dtr()
	dm clone: Fix UAF in clone_dtr()
	dm cache: Fix UAF in destroy()
	dm cache: set needs_check flag after aborting metadata
	tracing/hist: Fix out-of-bound write on 'action_data.var_ref_idx'
	perf/core: Call LSM hook after copying perf_event_attr
	KVM: nVMX: Inject #GP, not #UD, if "generic" VMXON CR0/CR4 check fails
	x86/microcode/intel: Do not retry microcode reloading on the APs
	ftrace/x86: Add back ftrace_expected for ftrace bug reports
	x86/kprobes: Fix kprobes instruction boudary check with CONFIG_RETHUNK
	tracing/hist: Fix wrong return value in parse_action_params()
	tracing: Fix infinite loop in tracing_read_pipe on overflowed print_trace_line
	staging: media: tegra-video: fix chan->mipi value on error
	ARM: 9256/1: NWFPE: avoid compiler-generated __aeabi_uldivmod
	media: dvb-core: Fix double free in dvb_register_device()
	media: dvb-core: Fix UAF due to refcount races at releasing
	cifs: fix confusing debug message
	cifs: fix missing display of three mount options
	rtc: ds1347: fix value written to century register
	md/bitmap: Fix bitmap chunk size overflow issues
	efi: Add iMac Pro 2017 to uefi skip cert quirk
	wifi: wilc1000: sdio: fix module autoloading
	ASoC: jz4740-i2s: Handle independent FIFO flush bits
	ipmi: fix long wait in unload when IPMI disconnect
	mtd: spi-nor: Check for zero erase size in spi_nor_find_best_erase_type()
	ima: Fix a potential NULL pointer access in ima_restore_measurement_list
	ipmi: fix use after free in _ipmi_destroy_user()
	PCI: Fix pci_device_is_present() for VFs by checking PF
	PCI/sysfs: Fix double free in error path
	crypto: n2 - add missing hash statesize
	driver core: Fix bus_type.match() error handling in __driver_attach()
	iommu/amd: Fix ivrs_acpihid cmdline parsing code
	remoteproc: core: Do pm_relax when in RPROC_OFFLINE state
	parisc: led: Fix potential null-ptr-deref in start_task()
	device_cgroup: Roll back to original exceptions after copy failure
	drm/connector: send hotplug uevent on connector cleanup
	drm/vmwgfx: Validate the box size for the snooped cursor
	drm/i915/dsi: fix VBT send packet port selection for dual link DSI
	drm/ingenic: Fix missing platform_driver_unregister() call in ingenic_drm_init()
	ext4: silence the warning when evicting inode with dioread_nolock
	ext4: add inode table check in __ext4_get_inode_loc to aovid possible infinite loop
	ext4: fix use-after-free in ext4_orphan_cleanup
	ext4: fix undefined behavior in bit shift for ext4_check_flag_values
	ext4: add EXT4_IGET_BAD flag to prevent unexpected bad inode
	ext4: add helper to check quota inums
	ext4: fix bug_on in __es_tree_search caused by bad quota inode
	ext4: fix reserved cluster accounting in __es_remove_extent()
	ext4: check and assert if marking an no_delete evicting inode dirty
	ext4: fix bug_on in __es_tree_search caused by bad boot loader inode
	ext4: init quota for 'old.inode' in 'ext4_rename'
	ext4: fix delayed allocation bug in ext4_clu_mapped for bigalloc + inline
	ext4: fix corruption when online resizing a 1K bigalloc fs
	ext4: fix error code return to user-space in ext4_get_branch()
	ext4: avoid BUG_ON when creating xattrs
	ext4: fix inode leak in ext4_xattr_inode_create() on an error path
	ext4: initialize quota before expanding inode in setproject ioctl
	ext4: avoid unaccounted block allocation when expanding inode
	ext4: allocate extended attribute value in vmalloc area
	drm/amdgpu: handle polaris10/11 overlap asics (v2)
	drm/amdgpu: make display pinning more flexible (v2)
	ARM: renumber bits related to _TIF_WORK_MASK
	perf/x86/intel/uncore: Generalize I/O stacks to PMON mapping procedure
	perf/x86/intel/uncore: Clear attr_update properly
	btrfs: replace strncpy() with strscpy()
	x86/mce: Get rid of msr_ops
	x86/MCE/AMD: Clear DFR errors found in THR handler
	media: s5p-mfc: Fix to handle reference queue during finishing
	media: s5p-mfc: Clear workbit to handle error condition
	media: s5p-mfc: Fix in register read and write for H264
	perf probe: Use dwarf_attr_integrate as generic DWARF attr accessor
	perf probe: Fix to get the DW_AT_decl_file and DW_AT_call_file as unsinged data
	x86/kprobes: Convert to insn_decode()
	x86/kprobes: Fix optprobe optimization check with CONFIG_RETHUNK
	staging: media: tegra-video: fix device_node use after free
	ravb: Fix "failed to switch device to config mode" message during unbind
	riscv/stacktrace: Fix stack output without ra on the stack top
	riscv: stacktrace: Fixup ftrace_graph_ret_addr retp argument
	ext4: goto right label 'failed_mount3a'
	ext4: correct inconsistent error msg in nojournal mode
	mm/highmem: Lift memcpy_[to|from]_page to core
	ext4: use memcpy_to_page() in pagecache_write()
	fs: ext4: initialize fsdata in pagecache_write()
	ext4: move functions in super.c
	ext4: simplify ext4 error translation
	ext4: fix various seppling typos
	ext4: fix leaking uninitialized memory in fast-commit journal
	ext4: use kmemdup() to replace kmalloc + memcpy
	mbcache: don't reclaim used entries
	mbcache: add functions to delete entry if unused
	ext4: remove EA inode entry from mbcache on inode eviction
	ext4: unindent codeblock in ext4_xattr_block_set()
	ext4: fix race when reusing xattr blocks
	mbcache: automatically delete entries from cache on freeing
	ext4: fix deadlock due to mbcache entry corruption
	SUNRPC: ensure the matching upcall is in-flight upon downcall
	bpf: pull before calling skb_postpull_rcsum()
	drm/panfrost: Fix GEM handle creation ref-counting
	vmxnet3: correctly report csum_level for encapsulated packet
	veth: Fix race with AF_XDP exposing old or uninitialized descriptors
	nfsd: shut down the NFSv4 state objects before the filecache
	net: hns3: add interrupts re-initialization while doing VF FLR
	net: sched: fix memory leak in tcindex_set_parms
	qlcnic: prevent ->dcb use-after-free on qlcnic_dcb_enable() failure
	nfc: Fix potential resource leaks
	vhost/vsock: Fix error handling in vhost_vsock_init()
	vringh: fix range used in iotlb_translate()
	vhost: fix range used in translate_desc()
	net/mlx5: Add forgotten cleanup calls into mlx5_init_once() error path
	net/mlx5: Avoid recovery in probe flows
	net/mlx5e: IPoIB, Don't allow CQE compression to be turned on by default
	net/mlx5e: Fix hw mtu initializing at XDP SQ allocation
	net: amd-xgbe: add missed tasklet_kill
	net: phy: xgmiitorgmii: Fix refcount leak in xgmiitorgmii_probe
	RDMA/mlx5: Fix validation of max_rd_atomic caps for DC
	drm/meson: Reduce the FIFO lines held when AFBC is not used
	filelock: new helper: vfs_inode_has_locks
	ceph: switch to vfs_inode_has_locks() to fix file lock bug
	gpio: sifive: Fix refcount leak in sifive_gpio_probe
	net: sched: atm: dont intepret cls results when asked to drop
	net: sched: cbq: dont intepret cls results when asked to drop
	netfilter: ipset: fix hash:net,port,net hang with /0 subnet
	netfilter: ipset: Rework long task execution when adding/deleting entries
	perf tools: Fix resources leak in perf_data__open_dir()
	drivers/net/bonding/bond_3ad: return when there's no aggregator
	usb: rndis_host: Secure rndis_query check against int overflow
	drm/i915: unpin on error in intel_vgpu_shadow_mm_pin()
	caif: fix memory leak in cfctrl_linkup_request()
	udf: Fix extension of the last extent in the file
	ASoC: Intel: bytcr_rt5640: Add quirk for the Advantech MICA-071 tablet
	nvme: fix multipath crash caused by flush request when blktrace is enabled
	x86/bugs: Flush IBP in ib_prctl_set()
	nfsd: fix handling of readdir in v4root vs. mount upcall timeout
	fbdev: matroxfb: G200eW: Increase max memory from 1 MB to 16 MB
	riscv: uaccess: fix type of 0 variable on error in get_user()
	drm/i915/gvt: fix gvt debugfs destroy
	drm/i915/gvt: fix vgpu debugfs clean in remove
	ext4: don't allow journal inode to have encrypt flag
	selftests: set the BUILD variable to absolute path
	hfs/hfsplus: use WARN_ON for sanity check
	hfs/hfsplus: avoid WARN_ON() for sanity check, use proper error handling
	mbcache: Avoid nesting of cache->c_list_lock under bit locks
	efi: random: combine bootloader provided RNG seed with RNG protocol output
	io_uring: Fix unsigned 'res' comparison with zero in io_fixup_rw_res()
	parisc: Align parisc MADV_XXX constants with all other architectures
	ext4: disable fast-commit of encrypted dir operations
	ext4: don't set up encryption key during jbd2 transaction
	fsl_lpuart: Don't enable interrupts too early
	serial: fixup backport of "serial: Deassert Transmit Enable on probe in driver-specific way"
	mptcp: mark ops structures as ro_after_init
	mptcp: remove MPTCP 'ifdef' in TCP SYN cookies
	mptcp: dedicated request sock for subflow in v6
	mptcp: use proper req destructor for IPv6
	net: sched: disallow noqueue for qdisc classes
	net/ulp: prevent ULP without clone op from entering the LISTEN status
	ALSA: pcm: Move rwsem lock inside snd_ctl_elem_read to prevent UAF
	ALSA: hda/hdmi: Add a HP device 0x8715 to force connect list
	ALSA: hda - Enable headset mic on another Dell laptop with ALC3254
	Linux 5.10.163

Change-Id: I9026971760be8484f1e1fa607f9f91243cc87785
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
2023-02-06 12:30:05 +00:00
Wolfram Sang d8e7a44f48 clocksource/drivers/sh_cmt: Access registers according to spec
[ Upstream commit 3f44f7156f ]

Documentation for most CMTs say that it takes two input clocks before
changes propagate to the timer. This is especially relevant when the timer
is stopped to change further settings.

Implement the delays according to the spec. To avoid unnecessary delays in
atomic mode, also check if the to-be-written value actually differs.

CMCNT is a bit special because testing showed that it requires 3 cycles to
propagate, which affects all CMTs. Also, the WRFLAG needs to be checked
before writing. This fixes "cannot clear CMCNT" messages which occur often
on R-Car Gen4 SoCs, but only very rarely on older SoCs for some reason.

Fixes: 81b3b27110 ("clocksource: sh_cmt: Add support for multiple channels per device")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221130210609.7718-1-wsa+renesas@sang-engineering.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-14 10:15:20 +01:00
Geert Uytterhoeven 0853787db2 clocksource/drivers/sh_cmt: Make sure channel clock supply is enabled
[ Upstream commit 2a97d55333 ]

The Renesas Compare Match Timer 0 and 1 (CMT0/1) variants have a
register to control the clock supply to the individual channels.
Currently the driver does not touch this register, and relies on the
documented initial value, which has the clock supply enabled for all
channels present.

However, when Linux starts on the APE6-EVM development board, only the
clock supply to the first CMT1 channel is enabled.  Hence the first
channel (used as a clockevent) works, while the second channel (used as
a clocksource) does not.  Note that the default system clocksource is
the Cortex-A15 architectured timer, and the user needs to manually
switch to the CMT1 clocksource to trigger the broken behavior.

Fix this by removing the fragile dependency on implicit reset and/or
boot loader state, and by enabling the clock supply explicitly for all
channels used instead.  This requires postponing the clk_disable() call,
else the timer's registers cannot be accessed in sh_cmt_setup_channel().

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20201210194648.2901899-1-geert+renesas@glider.be
Stable-dep-of: 3f44f7156f ("clocksource/drivers/sh_cmt: Access registers according to spec")
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-14 10:15:20 +01:00
Greg Kroah-Hartman 2300418cc6 Merge 5.10.65 into android12-5.10-lts
Changes in 5.10.65
	locking/mutex: Fix HANDOFF condition
	regmap: fix the offset of register error log
	regulator: tps65910: Silence deferred probe error
	crypto: mxs-dcp - Check for DMA mapping errors
	sched/deadline: Fix reset_on_fork reporting of DL tasks
	power: supply: axp288_fuel_gauge: Report register-address on readb / writeb errors
	crypto: omap-sham - clear dma flags only after omap_sham_update_dma_stop()
	sched/deadline: Fix missing clock update in migrate_task_rq_dl()
	rcu/tree: Handle VM stoppage in stall detection
	EDAC/mce_amd: Do not load edac_mce_amd module on guests
	posix-cpu-timers: Force next expiration recalc after itimer reset
	hrtimer: Avoid double reprogramming in __hrtimer_start_range_ns()
	hrtimer: Ensure timerfd notification for HIGHRES=n
	udf: Check LVID earlier
	udf: Fix iocharset=utf8 mount option
	isofs: joliet: Fix iocharset=utf8 mount option
	bcache: add proper error unwinding in bcache_device_init
	blk-throtl: optimize IOPS throttle for large IO scenarios
	nvme-tcp: don't update queue count when failing to set io queues
	nvme-rdma: don't update queue count when failing to set io queues
	nvmet: pass back cntlid on successful completion
	power: supply: smb347-charger: Add missing pin control activation
	power: supply: max17042_battery: fix typo in MAx17042_TOFF
	s390/cio: add dev_busid sysfs entry for each subchannel
	s390/zcrypt: fix wrong offset index for APKA master key valid state
	libata: fix ata_host_start()
	crypto: omap - Fix inconsistent locking of device lists
	crypto: qat - do not ignore errors from enable_vf2pf_comms()
	crypto: qat - handle both source of interrupt in VF ISR
	crypto: qat - fix reuse of completion variable
	crypto: qat - fix naming for init/shutdown VF to PF notifications
	crypto: qat - do not export adf_iov_putmsg()
	fcntl: fix potential deadlock for &fasync_struct.fa_lock
	udf_get_extendedattr() had no boundary checks.
	s390/kasan: fix large PMD pages address alignment check
	s390/pci: fix misleading rc in clp_set_pci_fn()
	s390/debug: keep debug data on resize
	s390/debug: fix debug area life cycle
	s390/ap: fix state machine hang after failure to enable irq
	power: supply: cw2015: use dev_err_probe to allow deferred probe
	m68k: emu: Fix invalid free in nfeth_cleanup()
	sched/numa: Fix is_core_idle()
	sched: Fix UCLAMP_FLAG_IDLE setting
	rcu: Fix to include first blocked task in stall warning
	rcu: Add lockdep_assert_irqs_disabled() to rcu_sched_clock_irq() and callees
	rcu: Fix stall-warning deadlock due to non-release of rcu_node ->lock
	m68k: Fix invalid RMW_INSNS on CPUs that lack CAS
	block: return ELEVATOR_DISCARD_MERGE if possible
	spi: spi-fsl-dspi: Fix issue with uninitialized dma_slave_config
	spi: spi-pic32: Fix issue with uninitialized dma_slave_config
	genirq/timings: Fix error return code in irq_timings_test_irqs()
	irqchip/loongson-pch-pic: Improve edge triggered interrupt support
	lib/mpi: use kcalloc in mpi_resize
	clocksource/drivers/sh_cmt: Fix wrong setting if don't request IRQ for clock source channel
	block: nbd: add sanity check for first_minor
	spi: coldfire-qspi: Use clk_disable_unprepare in the remove function
	irqchip/gic-v3: Fix priority comparison when non-secure priorities are used
	crypto: qat - use proper type for vf_mask
	certs: Trigger creation of RSA module signing key if it's not an RSA key
	tpm: ibmvtpm: Avoid error message when process gets signal while waiting
	x86/mce: Defer processing of early errors
	spi: davinci: invoke chipselect callback
	blk-crypto: fix check for too-large dun_bytes
	regulator: vctrl: Use locked regulator_get_voltage in probe path
	regulator: vctrl: Avoid lockdep warning in enable/disable ops
	spi: sprd: Fix the wrong WDG_LOAD_VAL
	spi: spi-zynq-qspi: use wait_for_completion_timeout to make zynq_qspi_exec_mem_op not interruptible
	EDAC/i10nm: Fix NVDIMM detection
	drm/panfrost: Fix missing clk_disable_unprepare() on error in panfrost_clk_init()
	drm/gma500: Fix end of loop tests for list_for_each_entry
	ASoC: mediatek: mt8183: Fix Unbalanced pm_runtime_enable in mt8183_afe_pcm_dev_probe
	media: TDA1997x: enable EDID support
	leds: is31fl32xx: Fix missing error code in is31fl32xx_parse_dt()
	soc: rockchip: ROCKCHIP_GRF should not default to y, unconditionally
	media: cxd2880-spi: Fix an error handling path
	drm/of: free the right object
	bpf: Fix a typo of reuseport map in bpf.h.
	bpf: Fix potential memleak and UAF in the verifier.
	drm/of: free the iterator object on failure
	gve: fix the wrong AdminQ buffer overflow check
	libbpf: Fix the possible memory leak on error
	ARM: dts: aspeed-g6: Fix HVI3C function-group in pinctrl dtsi
	arm64: dts: renesas: r8a77995: draak: Remove bogus adv7511w properties
	i40e: improve locking of mac_filter_hash
	soc: qcom: rpmhpd: Use corner in power_off
	libbpf: Fix removal of inner map in bpf_object__create_map
	gfs2: Fix memory leak of object lsi on error return path
	firmware: fix theoretical UAF race with firmware cache and resume
	driver core: Fix error return code in really_probe()
	ionic: cleanly release devlink instance
	media: dvb-usb: fix uninit-value in dvb_usb_adapter_dvb_init
	media: dvb-usb: fix uninit-value in vp702x_read_mac_addr
	media: dvb-usb: Fix error handling in dvb_usb_i2c_init
	media: go7007: fix memory leak in go7007_usb_probe
	media: go7007: remove redundant initialization
	media: rockchip/rga: use pm_runtime_resume_and_get()
	media: rockchip/rga: fix error handling in probe
	media: coda: fix frame_mem_ctrl for YUV420 and YVU420 formats
	media: atomisp: fix the uninitialized use and rename "retvalue"
	Bluetooth: sco: prevent information leak in sco_conn_defer_accept()
	6lowpan: iphc: Fix an off-by-one check of array index
	drm/amdgpu/acp: Make PM domain really work
	tcp: seq_file: Avoid skipping sk during tcp_seek_last_pos
	ARM: dts: meson8: Use a higher default GPU clock frequency
	ARM: dts: meson8b: odroidc1: Fix the pwm regulator supply properties
	ARM: dts: meson8b: mxq: Fix the pwm regulator supply properties
	ARM: dts: meson8b: ec100: Fix the pwm regulator supply properties
	net/mlx5e: Prohibit inner indir TIRs in IPoIB
	net/mlx5e: Block LRO if firmware asks for tunneled LRO
	cgroup/cpuset: Fix a partition bug with hotplug
	drm: mxsfb: Enable recovery on underflow
	drm: mxsfb: Increase number of outstanding requests on V4 and newer HW
	drm: mxsfb: Clear FIFO_CLEAR bit
	net: cipso: fix warnings in netlbl_cipsov4_add_std
	Bluetooth: mgmt: Fix wrong opcode in the response for add_adv cmd
	arm64: dts: renesas: rzg2: Convert EtherAVB to explicit delay handling
	arm64: dts: renesas: hihope-rzg2-ex: Add EtherAVB internal rx delay
	devlink: Break parameter notification sequence to be before/after unload/load driver
	net/mlx5: Fix missing return value in mlx5_devlink_eswitch_inline_mode_set()
	i2c: highlander: add IRQ check
	leds: lt3593: Put fwnode in any case during ->probe()
	leds: trigger: audio: Add an activate callback to ensure the initial brightness is set
	media: em28xx-input: fix refcount bug in em28xx_usb_disconnect
	media: venus: venc: Fix potential null pointer dereference on pointer fmt
	PCI: PM: Avoid forcing PCI_D0 for wakeup reasons inconsistently
	PCI: PM: Enable PME if it can be signaled from D3cold
	bpf, samples: Add missing mprog-disable to xdp_redirect_cpu's optstring
	soc: qcom: smsm: Fix missed interrupts if state changes while masked
	debugfs: Return error during {full/open}_proxy_open() on rmmod
	Bluetooth: increase BTNAMSIZ to 21 chars to fix potential buffer overflow
	PM: EM: Increase energy calculation precision
	selftests/bpf: Fix bpf-iter-tcp4 test to print correctly the dest IP
	drm/msm/mdp4: refactor HW revision detection into read_mdp_hw_revision
	drm/msm/mdp4: move HW revision detection to earlier phase
	drm/msm/dpu: make dpu_hw_ctl_clear_all_blendstages clear necessary LMs
	arm64: dts: exynos: correct GIC CPU interfaces address range on Exynos7
	counter: 104-quad-8: Return error when invalid mode during ceiling_write
	cgroup/cpuset: Miscellaneous code cleanup
	cgroup/cpuset: Fix violation of cpuset locking rule
	ASoC: Intel: Fix platform ID matching
	Bluetooth: fix repeated calls to sco_sock_kill
	drm/msm/dsi: Fix some reference counted resource leaks
	net/mlx5: Register to devlink ingress VLAN filter trap
	net/mlx5: Fix unpublish devlink parameters
	ASoC: rt5682: Implement remove callback
	ASoC: rt5682: Properly turn off regulators if wrong device ID
	usb: dwc3: meson-g12a: add IRQ check
	usb: dwc3: qcom: add IRQ check
	usb: gadget: udc: at91: add IRQ check
	usb: gadget: udc: s3c2410: add IRQ check
	usb: phy: fsl-usb: add IRQ check
	usb: phy: twl6030: add IRQ checks
	usb: gadget: udc: renesas_usb3: Fix soc_device_match() abuse
	selftests/bpf: Fix test_core_autosize on big-endian machines
	devlink: Clear whole devlink_flash_notify struct
	samples: pktgen: add missing IPv6 option to pktgen scripts
	Bluetooth: Move shutdown callback before flushing tx and rx queue
	PM: cpu: Make notifier chain use a raw_spinlock_t
	usb: host: ohci-tmio: add IRQ check
	usb: phy: tahvo: add IRQ check
	libbpf: Re-build libbpf.so when libbpf.map changes
	mac80211: Fix insufficient headroom issue for AMSDU
	locking/lockdep: Mark local_lock_t
	locking/local_lock: Add missing owner initialization
	lockd: Fix invalid lockowner cast after vfs_test_lock
	nfsd4: Fix forced-expiry locking
	arm64: dts: marvell: armada-37xx: Extend PCIe MEM space
	clk: staging: correct reference to config IOMEM to config HAS_IOMEM
	i2c: synquacer: fix deferred probing
	firmware: raspberrypi: Keep count of all consumers
	firmware: raspberrypi: Fix a leak in 'rpi_firmware_get()'
	usb: gadget: mv_u3d: request_irq() after initializing UDC
	mm/swap: consider max pages in iomap_swapfile_add_extent
	lkdtm: replace SCSI_DISPATCH_CMD with SCSI_QUEUE_RQ
	Bluetooth: add timeout sanity check to hci_inquiry
	i2c: iop3xx: fix deferred probing
	i2c: s3c2410: fix IRQ check
	i2c: fix platform_get_irq.cocci warnings
	i2c: hix5hd2: fix IRQ check
	gfs2: init system threads before freeze lock
	rsi: fix error code in rsi_load_9116_firmware()
	rsi: fix an error code in rsi_probe()
	ASoC: Intel: kbl_da7219_max98927: Fix format selection for max98373
	ASoC: Intel: Skylake: Leave data as is when invoking TLV IPCs
	ASoC: Intel: Skylake: Fix module resource and format selection
	mmc: sdhci: Fix issue with uninitialized dma_slave_config
	mmc: dw_mmc: Fix issue with uninitialized dma_slave_config
	mmc: moxart: Fix issue with uninitialized dma_slave_config
	bpf: Fix possible out of bound write in narrow load handling
	CIFS: Fix a potencially linear read overflow
	i2c: mt65xx: fix IRQ check
	i2c: xlp9xx: fix main IRQ check
	usb: ehci-orion: Handle errors of clk_prepare_enable() in probe
	usb: bdc: Fix an error handling path in 'bdc_probe()' when no suitable DMA config is available
	usb: bdc: Fix a resource leak in the error handling path of 'bdc_probe()'
	tty: serial: fsl_lpuart: fix the wrong mapbase value
	ASoC: wcd9335: Fix a double irq free in the remove function
	ASoC: wcd9335: Fix a memory leak in the error handling path of the probe function
	ASoC: wcd9335: Disable irq on slave ports in the remove function
	iwlwifi: follow the new inclusive terminology
	iwlwifi: skip first element in the WTAS ACPI table
	ice: Only lock to update netdev dev_addr
	ath6kl: wmi: fix an error code in ath6kl_wmi_sync_point()
	atlantic: Fix driver resume flow.
	bcma: Fix memory leak for internally-handled cores
	brcmfmac: pcie: fix oops on failure to resume and reprobe
	ipv6: make exception cache less predictible
	ipv4: make exception cache less predictible
	net: sched: Fix qdisc_rate_table refcount leak when get tcf_block failed
	net: qualcomm: fix QCA7000 checksum handling
	octeontx2-af: Fix loop in free and unmap counter
	octeontx2-af: Fix static code analyzer reported issues
	octeontx2-af: Set proper errorcode for IPv4 checksum errors
	ipv4: fix endianness issue in inet_rtm_getroute_build_skb()
	ASoC: rt5682: Remove unused variable in rt5682_i2c_remove()
	iwlwifi Add support for ax201 in Samsung Galaxy Book Flex2 Alpha
	f2fs: guarantee to write dirty data when enabling checkpoint back
	time: Handle negative seconds correctly in timespec64_to_ns()
	io_uring: IORING_OP_WRITE needs hash_reg_file set
	bio: fix page leak bio_add_hw_page failure
	tty: Fix data race between tiocsti() and flush_to_ldisc()
	perf/x86/amd/ibs: Extend PERF_PMU_CAP_NO_EXCLUDE to IBS Op
	x86/resctrl: Fix a maybe-uninitialized build warning treated as error
	Revert "KVM: x86: mmu: Add guest physical address check in translate_gpa()"
	KVM: s390: index kvm->arch.idle_mask by vcpu_idx
	KVM: x86: Update vCPU's hv_clock before back to guest when tsc_offset is adjusted
	KVM: VMX: avoid running vmx_handle_exit_irqoff in case of emulation
	KVM: nVMX: Unconditionally clear nested.pi_pending on nested VM-Enter
	ARM: dts: at91: add pinctrl-{names, 0} for all gpios
	fuse: truncate pagecache on atomic_o_trunc
	fuse: flush extending writes
	IMA: remove -Wmissing-prototypes warning
	IMA: remove the dependency on CRYPTO_MD5
	fbmem: don't allow too huge resolutions
	backlight: pwm_bl: Improve bootloader/kernel device handover
	clk: kirkwood: Fix a clocking boot regression
	Linux 5.10.65

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ie0b9306ba6ee4193de3200df7cdacaeba152b83e
2021-09-15 14:16:47 +02:00
Phong Hoang 31fc50cd93 clocksource/drivers/sh_cmt: Fix wrong setting if don't request IRQ for clock source channel
[ Upstream commit be83c3b6e7 ]

If CMT instance has at least two channels, one channel will be used
as a clock source and another one used as a clock event device.
In that case, IRQ is not requested for clock source channel so
sh_cmt_clock_event_program_verify() might work incorrectly.
Besides, when a channel is only used for clock source, don't need to
re-set the next match_value since it should be maximum timeout as
it still is.

On the other hand, due to no IRQ, total_cycles is not counted up
when reaches compare match time (timer counter resets to zero),
so sh_cmt_clocksource_read() returns unexpected value.
Therefore, use 64-bit clocksoure's mask for 32-bit or 16-bit variants
will also lead to wrong delta calculation. Hence, this mask should
correspond to timer counter width, and above function just returns
the raw value of timer counter register.

Fixes: bfa76bb12f ("clocksource: sh_cmt: Request IRQ for clock event device only")
Fixes: 37e7742c55 ("clocksource/drivers/sh_cmt: Fix clocksource width for 32-bit machines")
Signed-off-by: Phong Hoang <phong.hoang.wz@renesas.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210422123443.73334-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-15 09:50:29 +02:00
Ulf Hansson 8522dd981c FROMGIT: PM: domains: Rename pm_genpd_syscore_poweroff|poweron()
To better describe what the pm_genpd_syscore_poweroff|poweron() functions
actually do, let's rename them to dev_pm_genpd_suspend|resume() and update
the rather few callers of them accordingly (a couple of clocksource
drivers).

Moreover, let's take the opportunity to add some documentation of these
exported functions, as that is currently missing.

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
(cherry picked from commit fc51989062 git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git)
Bug: 175076037
Change-Id: I8b59f0ca12e63b39f2a39528eb566232c78172c9
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
2020-12-12 23:40:00 +00:00
Geert Uytterhoeven ad7794d4dd clocksource/drivers/sh_cmt: Use "kHz" for kilohertz
"K" stands for "kelvin".

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200618080212.16560-1-geert+renesas@glider.be
2020-07-23 16:57:43 +02:00
Christoph Hellwig 4bdc0d676a remove ioremap_nocache and devm_ioremap_nocache
ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2020-01-06 09:45:59 +01:00
Bartosz Golaszewski 201e91091b sh: add the sh_ prefix to early platform symbols
Old early platform device support is now sh-specific. Before moving on
to implementing new early platform framework based on real platform
devices, prefix all early platform symbols with 'sh_'.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Rich Felker <dalias@libc.org>
Link: https://lore.kernel.org/r/20191003092913.10731-3-brgl@bgdev.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-07 13:50:48 +02:00
Bartosz Golaszewski 507fd01d53 drivers: move the early platform device support to arch/sh
SuperH is the only user of the current implementation of early platform
device support. We want to introduce a more robust approach to early
probing. As the first step - move all the current early platform code
to arch/sh.

In order not to export internal drivers/base functions to arch code for
this temporary solution - copy the two needed routines for driver
matching from drivers/base/platform.c to arch/sh/drivers/platform_early.c.

Also: call early_platform_cleanup() from subsys_initcall() so that it's
called after all early devices are probed.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Rich Felker <dalias@libc.org>
Link: https://lore.kernel.org/r/20191003092913.10731-2-brgl@bgdev.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-07 13:50:47 +02:00
Magnus Damm 19d608458f clocksource/drivers/sh_cmt: Document "cmt-48" as deprecated
Update the CMT driver to mark "renesas,cmt-48" as deprecated.

Instead of documenting a theoretical hardware device based on current software
support level, define DT bindings top-down based on available data sheet
information and make use of part numbers in the DT compat string.

In case of the only in-tree users r8a7740 and sh73a0 the compat strings
"renesas,r8a7740-cmt1" and "renesas,sh73a0-cmt1" may be used instead.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-08-27 00:31:39 +02:00
Magnus Damm 8c1afba285 clocksource/drivers/sh_cmt: r8a7740 and sh73a0 SoC-specific match
Add SoC-specific matching for CMT1 on r8a7740 and sh73a0.

This allows us to move away from the old DT bindings such as
 - "renesas,cmt-48-sh73a0"
 - "renesas,cmt-48-r8a7740"
 - "renesas,cmt-48"
in favour for the now commonly used format "renesas,<soc>-<device>"

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-08-27 00:31:39 +02:00
Stephen Boyd 9f475d084c clocksource: Remove dev_err() usage after platform_get_irq()
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.

// <smpl>
@@
expression ret;
struct platform_device *E;
@@

ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);

if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>

While we're here, remove braces on if statements that only have one
statement (manually).

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-08-27 00:31:39 +02:00
Sergei Shtylyov ac142a7fd2 clocksource/drivers/sh_cmt: Add R-Car gen3 support
Add support for the R-Car gen3 CMT types 0/1 -- they seem to be the same
CMT types 0/1 as in R-Car gen2 SoCs.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-10-03 14:37:01 +02:00
Sergei Shtylyov eceb4c49ae clocksource/drivers/sh_cmt: Properly line-wrap sh_cmt_of_table[] initializer
There's no good reason for the sh_cmt_of_table[] initializer to
violate the 80-column limit, especially after the commit 8d50e9476b
("clocksource/drivers/sh_cmt: Mark "renesas,cmt-48-gen2" deprecated")
partially fixed it -- fix the R-Car gen2 related entries as well.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-10-03 14:36:59 +02:00
Sergei Shtylyov 37e7742c55 clocksource/drivers/sh_cmt: Fix clocksource width for 32-bit machines
The driver seems to abuse *unsigned long* not only for the (32-bit)
register values but also for the 'sh_cmt_channel::total_cycles' which
needs to always be 64-bit -- as a result, the clocksource's mask is
needlessly clamped down to 32-bits on the 32-bit machines...

Fixes: 19bdc9d061 ("clocksource: sh_cmt clocksource support")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-10-03 14:36:58 +02:00
Sergei Shtylyov 22627c6f3e clocksource/drivers/sh_cmt: Fixup for 64-bit machines
When trying to use CMT for clockevents on R-Car gen3 SoCs, I noticed
that 'max_delta_ns' for the broadcast timer (CMT) was shown as 1000 in
/proc/timer_list. It turned out that when calculating it, the driver did
1 << 32 (causing what I think was undefined behavior) resulting in a zero
delta, later clamped to 1000 by cev_delta2ns(). The root cause turned out
to be that the driver abused *unsigned long* for the CMT register values
(which are 16/32-bit), so that the calculation of 'ch->max_match_value'
in sh_cmt_setup_channel() used the wrong branch. Using more proper 'u32'
instead fixed 'max_delta_ns' and even fixed the switching an active
clocksource to CMT (which caused the system to turn non-interactive
before).

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-10-03 14:36:57 +02:00
Kuninori Morimoto efad011737 clocksource/drivers/sh_cmt: Convert to SPDX identifiers
This patch updates license to use SPDX-License-Identifier instead of verbose
license text.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-10-03 14:36:54 +02:00
Kees Cook 6396bb2215 treewide: kzalloc() -> kcalloc()
The kzalloc() function has a 2-factor argument form, kcalloc(). This
patch replaces cases of:

        kzalloc(a * b, gfp)

with:
        kcalloc(a * b, gfp)

as well as handling cases of:

        kzalloc(a * b * c, gfp)

with:

        kzalloc(array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        kzalloc_array(array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        kzalloc(4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  kzalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  kzalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  kzalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

- kzalloc
+ kcalloc
  (
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  kzalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  kzalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kzalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  kzalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  kzalloc(C1 * C2 * C3, ...)
|
  kzalloc(
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  kzalloc(sizeof(THING) * C2, ...)
|
  kzalloc(sizeof(TYPE) * C2, ...)
|
  kzalloc(C1 * C2 * C3, ...)
|
  kzalloc(C1 * C2, ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	(E1) * E2
+	E1, E2
  , ...)
|
- kzalloc
+ kcalloc
  (
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- kzalloc
+ kcalloc
  (
-	E1 * E2
+	E1, E2
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 16:19:22 -07:00
Geert Uytterhoeven 2d1d5172bf clocksource/drivers/sh_cmt: Use of_device_get_match_data() helper
Use the existing of_device_get_match_data() helper instead of
open-coding its functionality.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19 23:48:59 +02:00
Geert Uytterhoeven d1d285972e clocksource/drivers/sh_cmt: Remove unused "renesas, channels-mask" handling
The in-driver channel configuration in sh_cmt_info.channels_mask is now
always set for all CMT devices instantiated from DT.

Hence the "renesas,channels-mask" property is no longer checked, and its
handling can be removed, cfr. commit 4e18111ff3 ("devicetree:
bindings: Remove deprecated properties").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19 23:48:58 +02:00
Geert Uytterhoeven 8d50e9476b clocksource/drivers/sh_cmt: Mark "renesas,cmt-48-gen2" deprecated
Document in the driver that "renesas,cmt-48-gen2" is deprecated, but
still supported for backward compatibility with old DTBs, cfr. commit
4e18111ff3 ("devicetree: bindings: Remove deprecated
properties").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19 23:48:57 +02:00
Geert Uytterhoeven f11fb6df3c clocksource/drivers/sh_cmt: Remove support for "renesas,cmt-32*"
Remove driver matching support for the unused "renesas,cmt-32" and
"renesas,cmt-32-fast" compatible values, cfr. commit 203bb34799
("devicetree: bindings: Remove unused 32-bit CMT bindings").

As this removes the last user of SH_CMT_32BIT_FAST, all support for this
variant is removed from the driver.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19 23:48:56 +02:00
Magnus Damm 83c79a6d8d clocksource/drivers/sh_cmt: Support separate R-Car Gen2 CMT0/1
Add support for the new R-Car Gen2 CMT0 and CMT1 bindings. Support
for the old DT binding is still kept around, however devices using
such binding will be treated as a low-feature CMT0 device. If users
want to make use of CMT1-specific features then they need to update
their DTBs. No special CMT1-specific features are however implemented
by his patch, only DT bindings are redone as groundwork for future
feature patches.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19 23:48:55 +02:00
Magnus Damm 464eed841f clocksource/drivers/sh_cmt: Use 0x3f mask for SH_CMT_48BIT case
Always use 0x3f as channel mask for the SH_CMT_48BIT type of devices.
Once this patch is applied the "renesas,channels-mask" property will
be ignored by the driver for older devices matching SH_CMT_48BIT. In
the future when all CMT types store channel mask in the driver then
we will be able to deprecate and remove "renesas,channels-mask" from DTS.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19 23:48:54 +02:00
Nicolai Stange bb2e94ac0c clockevents/drivers/sh_cmt: Set ->min_delta_ticks and ->max_delta_ticks
In preparation for making the clockevents core NTP correction aware,
all clockevent device drivers must set ->min_delta_ticks and
->max_delta_ticks rather than ->min_delta_ns and ->max_delta_ns: a
clockevent device's rate is going to change dynamically and thus, the
ratio of ns to ticks ceases to stay invariant.

Make the sh_cmt clockevent driver initialize these fields properly.

This patch alone doesn't introduce any change in functionality as the
clockevents core still looks exclusively at the (untouched) ->min_delta_ns
and ->max_delta_ns. As soon as this has changed, a followup patch will
purge the initialization of ->min_delta_ns and ->max_delta_ns from this
driver.

Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
2017-04-14 13:11:15 -07:00
Nicolai Stange 890f423b26 clocksource: sh_cmt: Compute rate before registration again
With the upcoming NTP correction related rate adjustments to be implemented
in the clockevents core, the latter needs to get informed about every rate
change of a clockevent device made after its registration.

Currently, sh_cmt violates this requirement in that it registers its
clockevent device with a dummy rate and sets its final ->mult and ->shift
values from its ->set_state_oneshot() and ->set_state_periodic() functions
respectively.

This patch moves the setting of the clockevent device's ->mult and ->shift
values to before its registration.

Note that there has been some back and forth regarding this question with
respect to the clocksource also provided by this driver:
  commit f4d7c3565c ("clocksource: sh_cmt: compute mult and shift before
                        registration")
moves the rate determination from the clocksource's ->enable() function to
before its registration. OTOH, the later
  commit 3593f5fe40 ("clocksource: sh_cmt: __clocksource_updatefreq_hz()
                        update")
basically reverts this, saying
  "Without this patch the old code uses clocksource_register() together
   with a hack that assumes a never changing clock rate."

However, I checked all current sh_cmt users in arch/sh as well as in
arch/arm/mach-shmobile carefully and right now, none of them changes any
rate in any clock tree relevant to sh_cmt after their respective
time_init(). Since all sh_cmt instances are created after time_init(), none
of them should ever observe any clock rate changes.

What's more, both, a clocksource as well as a clockevent device, can
immediately get selected for use at their registration and thus, enabled
at this point already. So it's probably safer to assume a "never changing
clock rate" here.

- Move the struct sh_cmt_channel's ->rate member to struct sh_cmt_device:
  it's a property of the underlying clock which is in turn specific to
  the sh_cmt_device.
- Determine the ->rate value in sh_cmt_setup() at device probing rather
  than at first usage.
- Set the clockevent device's ->mult and ->shift values right before its
  registration.
- Although not strictly necessary for the upcoming clockevent core changes,
  set the clocksource's rate at its registration for consistency.

Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
2017-03-23 12:14:00 -07:00
Thomas Gleixner a5a1d1c291 clocksource: Use a plain u64 instead of cycle_t
There is no point in having an extra type for extra confusion. u64 is
unambiguous.

Conversion was done with the following coccinelle script:

@rem@
@@
-typedef u64 cycle_t;

@fix@
typedef cycle_t;
@@
-cycle_t
+u64

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
2016-12-25 11:04:12 +01:00
Alexey Klimov 6eeb8c355f clocksource/drivers/sh_cmt: Remove unneeded memset() in sh_cmt_setup()
Memory for cmt struct is allocated by kzalloc() in sh_cmt_setup.

Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-10-15 17:42:00 +02:00
Linus Torvalds 5e359bf221 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
 "Rather large, but nothing exiting:

   - new range check for settimeofday() to prevent that boot time
     becomes negative.
   - fix for file time rounding
   - a few simplifications of the hrtimer code
   - fix for the proc/timerlist code so the output of clock realtime
     timers is accurate
   - more y2038 work
   - tree wide conversion of clockevent drivers to the new callbacks"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (88 commits)
  hrtimer: Handle failure of tick_init_highres() gracefully
  hrtimer: Unconfuse switch_hrtimer_base() a bit
  hrtimer: Simplify get_target_base() by returning current base
  hrtimer: Drop return code of hrtimer_switch_to_hres()
  time: Introduce timespec64_to_jiffies()/jiffies_to_timespec64()
  time: Introduce current_kernel_time64()
  time: Introduce struct itimerspec64
  time: Add the common weak version of update_persistent_clock()
  time: Always make sure wall_to_monotonic isn't positive
  time: Fix nanosecond file time rounding in timespec_trunc()
  timer_list: Add the base offset so remaining nsecs are accurate for non monotonic timers
  cris/time: Migrate to new 'set-state' interface
  kernel: broadcast-hrtimer: Migrate to new 'set-state' interface
  xtensa/time: Migrate to new 'set-state' interface
  unicore/time: Migrate to new 'set-state' interface
  um/time: Migrate to new 'set-state' interface
  sparc/time: Migrate to new 'set-state' interface
  sh/localtimer: Migrate to new 'set-state' interface
  score/time: Migrate to new 'set-state' interface
  s390/time: Migrate to new 'set-state' interface
  ...
2015-09-01 14:04:50 -07:00
Geert Uytterhoeven 8c436f8480 clockevents/drivers/sh_cmt: Remove obsolete sh-cmt-48 platform_device_id entry
Since the removal of the r8a7740 legacy SoC code in commit
44d88c754e ("ARM: shmobile: Remove legacy SoC code for R-Mobile
A1"), all former users of the "sh-cmt-48-gen2" platform device name are
only supported in generic DT-only ARM multi-platform builds.  The driver
doesn't need to match platform devices by name anymore, hence remove the
corresponding platform_device_id entry.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-10 11:40:54 +02:00
Viresh Kumar 051b782e24 clockevents/drivers/sh_cmt: Migrate to new 'set-state' interface
Migrate sh_cmt driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Magnus Damm <damm+renesas@opensource.se>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2015-08-10 11:40:38 +02:00
Geert Uytterhoeven 0fae62eafe clockevents/drivers/sh_cmt: Remove obsolete sh-cmt-48-gen2 platform_device_id entry
Since commit 914d7d1484 ("ARM: shmobile: r8a73a4: Remove legacy
code"), all former users of the "sh-cmt-48-gen2" platform device name
are only supported in generic DT-only ARM multi-platform builds.  The
driver doesn't need to match platform devices by name anymore, hence
remove the corresponding platform_device_id entry.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-10 11:40:25 +02:00
Geert Uytterhoeven 59252d1877 clockevents/drivers/sh_cmt: Remove obsolete sh-cmt-32-fast platform_device_id entry
Since commit 59b89af1d5 ("ARM: shmobile: sh7372: Remove Legacy C
SoC code"), there are no more users left of the "sh-cmt-32-fast"
platform device name. Hence remove the corresponding platform_device_id
entry from the driver.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-10 11:40:24 +02:00
Geert Uytterhoeven 54d46b7fbc clockevents/drivers/sh_cmt: Only perform clocksource suspend/resume if enabled
Currently the sh_cmt clocksource timer is disabled or enabled
unconditionally on clocksource suspend resp. resume, even if a
better clocksource is present (e.g. arch_sys_counter) and the
sh_cmt clocksource is not enabled.

As sh_cmt is a syscore device when its timer is enabled, this
may lead to a genpd.prepared_count imbalance in the presence of
PM Domains, which may cause a lock-up during reboot after s2ram.

During suspend:
  - pm_genpd_prepare() is called for all non-syscore devices (incl.
    sh_cmt), increasing genpd.prepared_count for each device,
  - clocksource.suspend() is called for all clocksource devices,
  - sh_cmt_clocksource_suspend() calls sh_cmt_stop(), which is a no-op
    as the clocksource was not enabled.

During resume:
  - clocksource.resume() is called for all clocksource devices,
  - sh_cmt_clocksource_resume() calls sh_cmt_start(), which enables the
    clocksource timer, and turns sh_cmt into a syscore device,
  - pm_genpd_complete() is called for all non-syscore devices (excl.
    sh_cmt now!), decreasing genpd.prepared_count for each device but
    sh_cmt.

Now genpd.prepared_count of the PM Domain containing sh_cmt is
still 1 instead of zero.  On subsequent suspend/resume cycles,
sh_cmt is still a syscore device, hence it's skipped for
pm_genpd_{prepare,complete}(), keeping the imbalance of
genpd.prepared_count at 1.

During reboot:

  - platform_drv_shutdown() is called for any platform device that has
    a driver with a .shutdown() method (only rcar-dmac on R-Car Gen2),

  - platform_drv_shutdown() calls dev_pm_domain_detach(), which
    calls genpd_dev_pm_detach(),

  - genpd_dev_pm_detach() keeps calling pm_genpd_remove_device() until
    it doesn't return -EAGAIN[*],

  - If the device is part of the same PM Domain as sh_cmt,
    pm_genpd_remove_device() always fails with -EAGAIN due to
    genpd.prepared_count > 0.

  - Infinite loop in genpd_dev_pm_detach()[*].

[*] Commit 93af5e9354 ("PM / Domains: Avoid infinite loops in
    attach/detach code") already limited the number of loop iterations,
    avoiding the lock-up.

To fix this, only disable or enable the clocksource timer on
clocksource suspend resp. resume if the clocksource was enabled.

This was tested on r8a7791/koelsch with the CPG Clock Domain:

  - using arch_sys_counter as the clocksource, which is the default, and
    which showed the problem,

  - using sh_cmt as a clocksource ("echo ffca0000.timer > \
    /sys/devices/system/clocksource/clocksource0/current_clocksource"),
    which behaves the same as before.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1438875126-12596-2-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-08 10:50:08 +02:00
John Stultz fba9e07208 clocksource: Rename __clocksource_updatefreq_*() to __clocksource_update_freq_*()
Ingo requested this function be renamed to improve readability,
so I've renamed __clocksource_updatefreq_scale() as well as the
__clocksource_updatefreq_hz/khz() functions to avoid
squishedtogethernames.

This touches some of the sh clocksources, which I've not tested.

The arch/arm/plat-omap change is just a comment change for
consistency.

Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1426133800-29329-13-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-13 08:07:08 +01:00
Laurent Pinchart 1768aa2f4c clocksource: sh_cmt: Add DT support
Document DT bindings and parse them in the CMT driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
2014-07-04 15:46:17 +02:00
Laurent Pinchart de599c8843 clocksource: sh_cmt: Replace global spinlock with a per-device spinlock
The global spinlock is used to protect the shared start/stop register.
Now that all CMT channels are handled by a single device instance, use a
per-device spinlock.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
2014-07-02 16:01:48 +02:00
Laurent Pinchart 31e912f598 clocksource: sh_cmt: Drop support for legacy platform data
Now that all platforms have switched to the new-style platform data,
drop support for the legacy version.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
2014-07-02 16:01:48 +02:00
Jingoo Han 0178f41d3d clocksource: sh_cmt: Remove unnecessary OOM messages
The site-specific OOM messages are unnecessary, because they
duplicate the MM subsystem generic OOM message.

[dlezcano] : refreshed against latest modifications: kmalloc -> kzalloc

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-05-23 09:23:10 +02:00
Laurent Pinchart bfa76bb12f clocksource: sh_cmt: Request IRQ for clock event device only
Clock sources don't need an IRQ, request the IRQ only for channels used
as clock event devices.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-04-16 12:03:16 +02:00
Laurent Pinchart e7a9bcc237 clocksource: sh_cmt: Sort headers alphabetically
This helps locating duplicates and inserting new headers.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-04-16 12:03:15 +02:00
Laurent Pinchart 1cd89c568c clocksource: sh_cmt: Remove FSF mail address from GPL notice
Do not include the paragraph about writing to the Free Software
Foundation's mailing address from the sample GPL notice. The FSF has
changed addresses in the past, and may do so again. Linux already
includes a copy of the GPL.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-04-16 12:03:15 +02:00
Laurent Pinchart 24b4e07df5 clocksource: sh_cmt: Rename clock to "fck" in the non-legacy case
The sh_cmt driver gets the CMT functional clock using a connection ID of
"cmt_fck". While all SH SoCs create clock lookup entries with a NULL
device ID and a "cmt_fck" connection ID, the ARM SoCs use the device ID
only with a NULL connection ID. This works on legacy platforms but will
break on ARM with DT boot.

Fix the situation by using a connection ID of "fck" in the non-legacy
platform data case. Clock lookup entries will be renamed to use the
device ID as well as the connection ID as platforms get moved to new
platform data. The legacy code will eventually be dropped, leaving us
with device ID based clock lookup, compatible with DT boot.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-04-16 12:03:14 +02:00
Laurent Pinchart 81b3b27110 clocksource: sh_cmt: Add support for multiple channels per device
CMT hardware devices can support multiple channels, with global
registers and per-channel registers. The sh_cmt driver currently models
the hardware with one Linux device per channel. This model makes it
difficult to handle global registers in a clean way.

Add support for a new model that uses one Linux device per timer with
multiple channels per device. This requires changes to platform data,
add new channel configuration fields.

Support for the legacy model is kept and will be removed after all
platforms switch to the new model.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-04-16 12:03:14 +02:00
Laurent Pinchart fb28a65981 clocksource: sh_cmt: Hardcode CMT clock source rating to 125
All boards use or should use a clock source rating of 125 for the CMT,
hardcode it in the driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-04-16 12:03:13 +02:00
Laurent Pinchart b7fcbb0f83 clocksource: sh_cmt: Hardcode CMT clock event rating to 125
All boards use or should use a clock event rating of 125 for the CMT,
hardcode it in the driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-04-16 12:03:12 +02:00
Laurent Pinchart f1ebe1e47e clocksource: sh_cmt: Set cpumask to cpu_possible_mask
The CMT is a global timer not restricted to a single CPU. It has a lower
rating than the TMU or ARM architected timer, but is still useful on
systems where the other timers are stopped during CPU sleep.

When multiple timers are available the timers core selects which timer
to use based on timer ratings.

On SMP systems where timer broadcasting is required, one dummy timer is
instantiated per CPU with a rating of 100. On those systems the CMT
timer has a rating of 80, which makes the dummy timer selected by
default on all CPUs. The CMT is then available, and will be used as a
broadcast timer.

On UP systems no dummy timer is instantiated. The CMT timer has a rating
of 125 on those systems and is used directly as a clock event device for
CPU0 without broadcasting.

The CMT rating shouldn't depend on whether we boot a UP or SMP system.
We can't raise the CMT rating to 125 on SMP systems. This would select
CMT as the clock event device for CPU0 as its rating is higher than the
dummy timer rating, and would leave the system without a broadcast
timer. We could instead lower the rating to 80 on all systems, but that
wouldn't reflect reality as ratings between 1 and 99 are documented as
"unfit for real use".

We should raise the rating above 99 and still have the CMT selected as a
broadcast timer. This can be done by changing the cpumask from
cpumask_of(0) to cpu_possible_mask. In that case the timer selection
logic will prefer the previously probed and already selected dummy timer
for all CPUs based on the fact that already selected per-cpu timers are
preferred over new global timers, regardless of their respective
ratings. This also better reflects reality, as the CMT is not tied to
the boot CPU.

Ideally the timer selection logic should realize that the CMT needs to
be used as a broadcast timer on SMP systems as no other broadcast timer
is available, regardless of the cpumask and rating.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-04-16 12:03:12 +02:00
Laurent Pinchart d14be99b7e clocksource: sh_cmt: Replace hardcoded register values with macros
Define symbolic macros for all used registers bits.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-04-16 12:03:11 +02:00
Laurent Pinchart 2cda3ac49d clocksource: sh_cmt: Split static information from sh_cmt_device
Create a new sh_cmt_info structure to hold static information about the
device model and reference that structure from the sh_cmt_device
structure.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-04-16 12:03:10 +02:00