develop-5.10
261 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Greg Kroah-Hartman
|
2df0fb4a4b |
Merge 5.10.50 into android12-5.10-lts
Changes in 5.10.50
Bluetooth: hci_qca: fix potential GPF
Bluetooth: btqca: Don't modify firmware contents in-place
Bluetooth: Remove spurious error message
ALSA: usb-audio: fix rate on Ozone Z90 USB headset
ALSA: usb-audio: Fix OOB access at proc output
ALSA: firewire-motu: fix stream format for MOTU 8pre FireWire
ALSA: usb-audio: scarlett2: Fix wrong resume call
ALSA: intel8x0: Fix breakage at ac97 clock measurement
ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 450 G8
ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 445 G8
ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 630 G8
ALSA: hda/realtek: Add another ALC236 variant support
ALSA: hda/realtek: fix mute/micmute LEDs for HP EliteBook x360 830 G8
ALSA: hda/realtek: Improve fixup for HP Spectre x360 15-df0xxx
ALSA: hda/realtek: Fix bass speaker DAC mapping for Asus UM431D
ALSA: hda/realtek: Apply LED fixup for HP Dragonfly G1, too
ALSA: hda/realtek: fix mute/micmute LEDs for HP EliteBook 830 G8 Notebook PC
media: dvb-usb: fix wrong definition
Input: usbtouchscreen - fix control-request directions
net: can: ems_usb: fix use-after-free in ems_usb_disconnect()
usb: gadget: eem: fix echo command packet response issue
usb: renesas-xhci: Fix handling of unknown ROM state
USB: cdc-acm: blacklist Heimann USB Appset device
usb: dwc3: Fix debugfs creation flow
usb: typec: Add the missed altmode_id_remove() in typec_register_altmode()
xhci: solve a double free problem while doing s4
gfs2: Fix underflow in gfs2_page_mkwrite
gfs2: Fix error handling in init_statfs
ntfs: fix validity check for file name attribute
selftests/lkdtm: Avoid needing explicit sub-shell
copy_page_to_iter(): fix ITER_DISCARD case
iov_iter_fault_in_readable() should do nothing in xarray case
Input: joydev - prevent use of not validated data in JSIOCSBTNMAP ioctl
crypto: nx - Fix memcpy() over-reading in nonce
crypto: ccp - Annotate SEV Firmware file names
arm_pmu: Fix write counter incorrect in ARMv7 big-endian mode
ARM: dts: ux500: Fix LED probing
ARM: dts: at91: sama5d4: fix pinctrl muxing
btrfs: send: fix invalid path for unlink operations after parent orphanization
btrfs: compression: don't try to compress if we don't have enough pages
btrfs: clear defrag status of a root if starting transaction fails
ext4: cleanup in-core orphan list if ext4_truncate() failed to get a transaction handle
ext4: fix kernel infoleak via ext4_extent_header
ext4: fix overflow in ext4_iomap_alloc()
ext4: return error code when ext4_fill_flex_info() fails
ext4: correct the cache_nr in tracepoint ext4_es_shrink_exit
ext4: remove check for zero nr_to_scan in ext4_es_scan()
ext4: fix avefreec in find_group_orlov
ext4: use ext4_grp_locked_error in mb_find_extent
can: bcm: delay release of struct bcm_op after synchronize_rcu()
can: gw: synchronize rcu operations before removing gw job entry
can: isotp: isotp_release(): omit unintended hrtimer restart on socket release
can: j1939: j1939_sk_init(): set SOCK_RCU_FREE to call sk_destruct() after RCU is done
can: peak_pciefd: pucan_handle_status(): fix a potential starvation issue in TX path
mac80211: remove iwlwifi specific workaround that broke sta NDP tx
SUNRPC: Fix the batch tasks count wraparound.
SUNRPC: Should wake up the privileged task firstly.
bus: mhi: Wait for M2 state during system resume
mm/gup: fix try_grab_compound_head() race with split_huge_page()
perf/smmuv3: Don't trample existing events with global filter
KVM: nVMX: Handle split-lock #AC exceptions that happen in L2
KVM: PPC: Book3S HV: Workaround high stack usage with clang
KVM: x86/mmu: Treat NX as used (not reserved) for all !TDP shadow MMUs
KVM: x86/mmu: Use MMU's role to detect CR4.SMEP value in nested NPT walk
s390/cio: dont call css_wait_for_slow_path() inside a lock
s390: mm: Fix secure storage access exception handling
f2fs: Prevent swap file in LFS mode
clk: agilex/stratix10/n5x: fix how the bypass_reg is handled
clk: agilex/stratix10: remove noc_clk
clk: agilex/stratix10: fix bypass representation
rtc: stm32: Fix unbalanced clk_disable_unprepare() on probe error path
iio: frequency: adf4350: disable reg and clk on error in adf4350_probe()
iio: light: tcs3472: do not free unallocated IRQ
iio: ltr501: mark register holding upper 8 bits of ALS_DATA{0,1} and PS_DATA as volatile, too
iio: ltr501: ltr559: fix initialization of LTR501_ALS_CONTR
iio: ltr501: ltr501_read_ps(): add missing endianness conversion
iio: accel: bma180: Fix BMA25x bandwidth register values
serial: mvebu-uart: fix calculation of clock divisor
serial: sh-sci: Stop dmaengine transfer in sci_stop_tx()
serial_cs: Add Option International GSM-Ready 56K/ISDN modem
serial_cs: remove wrong GLOBETROTTER.cis entry
ath9k: Fix kernel NULL pointer dereference during ath_reset_internal()
ssb: sdio: Don't overwrite const buffer if block_write fails
rsi: Assign beacon rate settings to the correct rate_info descriptor field
rsi: fix AP mode with WPA failure due to encrypted EAPOL
tracing/histograms: Fix parsing of "sym-offset" modifier
tracepoint: Add tracepoint_probe_register_may_exist() for BPF tracing
seq_buf: Make trace_seq_putmem_hex() support data longer than 8
powerpc/stacktrace: Fix spurious "stale" traces in raise_backtrace_ipi()
loop: Fix missing discard support when using LOOP_CONFIGURE
evm: Execute evm_inode_init_security() only when an HMAC key is loaded
evm: Refuse EVM_ALLOW_METADATA_WRITES only if an HMAC key is loaded
fuse: Fix crash in fuse_dentry_automount() error path
fuse: Fix crash if superblock of submount gets killed early
fuse: Fix infinite loop in sget_fc()
fuse: ignore PG_workingset after stealing
fuse: check connected before queueing on fpq->io
fuse: reject internal errno
thermal/cpufreq_cooling: Update offline CPUs per-cpu thermal_pressure
spi: Make of_register_spi_device also set the fwnode
Add a reference to ucounts for each cred
staging: media: rkvdec: fix pm_runtime_get_sync() usage count
media: marvel-ccic: fix some issues when getting pm_runtime
media: mdk-mdp: fix pm_runtime_get_sync() usage count
media: s5p: fix pm_runtime_get_sync() usage count
media: am437x: fix pm_runtime_get_sync() usage count
media: sh_vou: fix pm_runtime_get_sync() usage count
media: mtk-vcodec: fix PM runtime get logic
media: s5p-jpeg: fix pm_runtime_get_sync() usage count
media: sunxi: fix pm_runtime_get_sync() usage count
media: sti/bdisp: fix pm_runtime_get_sync() usage count
media: exynos4-is: fix pm_runtime_get_sync() usage count
media: exynos-gsc: fix pm_runtime_get_sync() usage count
spi: spi-loopback-test: Fix 'tx_buf' might be 'rx_buf'
spi: spi-topcliff-pch: Fix potential double free in pch_spi_process_messages()
spi: omap-100k: Fix the length judgment problem
regulator: uniphier: Add missing MODULE_DEVICE_TABLE
sched/core: Initialize the idle task with preemption disabled
hwrng: exynos - Fix runtime PM imbalance on error
crypto: nx - add missing MODULE_DEVICE_TABLE
media: sti: fix obj-$(config) targets
media: cpia2: fix memory leak in cpia2_usb_probe
media: cobalt: fix race condition in setting HPD
media: hevc: Fix dependent slice segment flags
media: pvrusb2: fix warning in pvr2_i2c_core_done
media: imx: imx7_mipi_csis: Fix logging of only error event counters
crypto: qat - check return code of qat_hal_rd_rel_reg()
crypto: qat - remove unused macro in FW loader
crypto: qce: skcipher: Fix incorrect sg count for dma transfers
arm64: perf: Convert snprintf to sysfs_emit
sched/fair: Fix ascii art by relpacing tabs
media: i2c: ov2659: Use clk_{prepare_enable,disable_unprepare}() to set xvclk on/off
media: bt878: do not schedule tasklet when it is not setup
media: em28xx: Fix possible memory leak of em28xx struct
media: hantro: Fix .buf_prepare
media: cedrus: Fix .buf_prepare
media: v4l2-core: Avoid the dangling pointer in v4l2_fh_release
media: bt8xx: Fix a missing check bug in bt878_probe
media: st-hva: Fix potential NULL pointer dereferences
crypto: hisilicon/sec - fixup 3des minimum key size declaration
Makefile: fix GDB warning with CONFIG_RELR
media: dvd_usb: memory leak in cinergyt2_fe_attach
memstick: rtsx_usb_ms: fix UAF
mmc: sdhci-sprd: use sdhci_sprd_writew
mmc: via-sdmmc: add a check against NULL pointer dereference
spi: meson-spicc: fix a wrong goto jump for avoiding memory leak.
spi: meson-spicc: fix memory leak in meson_spicc_probe
crypto: shash - avoid comparing pointers to exported functions under CFI
media: dvb_net: avoid speculation from net slot
media: siano: fix device register error path
media: imx-csi: Skip first few frames from a BT.656 source
hwmon: (max31790) Report correct current pwm duty cycles
hwmon: (max31790) Fix pwmX_enable attributes
drivers/perf: fix the missed ida_simple_remove() in ddr_perf_probe()
KVM: PPC: Book3S HV: Fix TLB management on SMT8 POWER9 and POWER10 processors
btrfs: fix error handling in __btrfs_update_delayed_inode
btrfs: abort transaction if we fail to update the delayed inode
btrfs: sysfs: fix format string for some discard stats
btrfs: don't clear page extent mapped if we're not invalidating the full page
btrfs: disable build on platforms having page size 256K
locking/lockdep: Fix the dep path printing for backwards BFS
lockding/lockdep: Avoid to find wrong lock dep path in check_irq_usage()
KVM: s390: get rid of register asm usage
regulator: mt6358: Fix vdram2 .vsel_mask
regulator: da9052: Ensure enough delay time for .set_voltage_time_sel
media: Fix Media Controller API config checks
ACPI: video: use native backlight for GA401/GA502/GA503
HID: do not use down_interruptible() when unbinding devices
EDAC/ti: Add missing MODULE_DEVICE_TABLE
ACPI: processor idle: Fix up C-state latency if not ordered
hv_utils: Fix passing zero to 'PTR_ERR' warning
lib: vsprintf: Fix handling of number field widths in vsscanf
Input: goodix - platform/x86: touchscreen_dmi - Move upside down quirks to touchscreen_dmi.c
platform/x86: touchscreen_dmi: Add an extra entry for the upside down Goodix touchscreen on Teclast X89 tablets
platform/x86: touchscreen_dmi: Add info for the Goodix GT912 panel of TM800A550L tablets
ACPI: EC: Make more Asus laptops use ECDT _GPE
block_dump: remove block_dump feature in mark_inode_dirty()
blk-mq: grab rq->refcount before calling ->fn in blk_mq_tagset_busy_iter
blk-mq: clear stale request in tags->rq[] before freeing one request pool
fs: dlm: cancel work sync othercon
random32: Fix implicit truncation warning in prandom_seed_state()
open: don't silently ignore unknown O-flags in openat2()
drivers: hv: Fix missing error code in vmbus_connect()
fs: dlm: fix memory leak when fenced
ACPICA: Fix memory leak caused by _CID repair function
ACPI: bus: Call kobject_put() in acpi_init() error path
ACPI: resources: Add checks for ACPI IRQ override
block: fix race between adding/removing rq qos and normal IO
platform/x86: asus-nb-wmi: Revert "Drop duplicate DMI quirk structures"
platform/x86: asus-nb-wmi: Revert "add support for ASUS ROG Zephyrus G14 and G15"
platform/x86: toshiba_acpi: Fix missing error code in toshiba_acpi_setup_keyboard()
nvme-pci: fix var. type for increasing cq_head
nvmet-fc: do not check for invalid target port in nvmet_fc_handle_fcp_rqst()
EDAC/Intel: Do not load EDAC driver when running as a guest
PCI: hv: Add check for hyperv_initialized in init_hv_pci_drv()
cifs: improve fallocate emulation
ACPI: EC: trust DSDT GPE for certain HP laptop
clocksource: Retry clock read if long delays detected
clocksource: Check per-CPU clock synchronization when marked unstable
tpm_tis_spi: add missing SPI device ID entries
ACPI: tables: Add custom DSDT file as makefile prerequisite
HID: wacom: Correct base usage for capacitive ExpressKey status bits
cifs: fix missing spinlock around update to ses->status
mailbox: qcom: Use PLATFORM_DEVID_AUTO to register platform device
block: fix discard request merge
kthread_worker: fix return value when kthread_mod_delayed_work() races with kthread_cancel_delayed_work_sync()
ia64: mca_drv: fix incorrect array size calculation
writeback, cgroup: increment isw_nr_in_flight before grabbing an inode
spi: Allow to have all native CSs in use along with GPIOs
spi: Avoid undefined behaviour when counting unused native CSs
media: venus: Rework error fail recover logic
media: s5p_cec: decrement usage count if disabled
media: hantro: do a PM resume earlier
crypto: ixp4xx - dma_unmap the correct address
crypto: ixp4xx - update IV after requests
crypto: ux500 - Fix error return code in hash_hw_final()
sata_highbank: fix deferred probing
pata_rb532_cf: fix deferred probing
media: I2C: change 'RST' to "RSET" to fix multiple build errors
sched/uclamp: Fix wrong implementation of cpu.uclamp.min
sched/uclamp: Fix locking around cpu_util_update_eff()
kbuild: Fix objtool dependency for 'OBJECT_FILES_NON_STANDARD_<obj> := n'
pata_octeon_cf: avoid WARN_ON() in ata_host_activate()
evm: fix writing <securityfs>/evm overflow
x86/elf: Use _BITUL() macro in UAPI headers
crypto: sa2ul - Fix leaks on failure paths with sa_dma_init()
crypto: sa2ul - Fix pm_runtime enable in sa_ul_probe()
crypto: ccp - Fix a resource leak in an error handling path
media: rc: i2c: Fix an error message
pata_ep93xx: fix deferred probing
locking/lockdep: Reduce LOCKDEP dependency list
media: rkvdec: Fix .buf_prepare
media: exynos4-is: Fix a use after free in isp_video_release
media: au0828: fix a NULL vs IS_ERR() check
media: tc358743: Fix error return code in tc358743_probe_of()
media: gspca/gl860: fix zero-length control requests
m68k: atari: Fix ATARI_KBD_CORE kconfig unmet dependency warning
media: siano: Fix out-of-bounds warnings in smscore_load_firmware_family2()
regulator: fan53880: Fix vsel_mask setting for FAN53880_BUCK
crypto: nitrox - fix unchecked variable in nitrox_register_interrupts
crypto: omap-sham - Fix PM reference leak in omap sham ops
crypto: x86/curve25519 - fix cpu feature checking logic in mod_exit
crypto: sm2 - remove unnecessary reset operations
crypto: sm2 - fix a memory leak in sm2
mmc: usdhi6rol0: fix error return code in usdhi6_probe()
arm64: consistently use reserved_pg_dir
arm64/mm: Fix ttbr0 values stored in struct thread_info for software-pan
media: subdev: remove VIDIOC_DQEVENT_TIME32 handling
media: s5p-g2d: Fix a memory leak on ctx->fh.m2m_ctx
hwmon: (lm70) Use device_get_match_data()
hwmon: (lm70) Revert "hwmon: (lm70) Add support for ACPI"
hwmon: (max31722) Remove non-standard ACPI device IDs
hwmon: (max31790) Fix fan speed reporting for fan7..12
KVM: nVMX: Sync all PGDs on nested transition with shadow paging
KVM: nVMX: Ensure 64-bit shift when checking VMFUNC bitmap
KVM: nVMX: Don't clobber nested MMU's A/D status on EPTP switch
KVM: x86/mmu: Fix return value in tdp_mmu_map_handle_target_level()
perf/arm-cmn: Fix invalid pointer when access dtc object sharing the same IRQ number
KVM: arm64: Don't zero the cycle count register when PMCR_EL0.P is set
regulator: hi655x: Fix pass wrong pointer to config.driver_data
btrfs: clear log tree recovering status if starting transaction fails
x86/sev: Make sure IRQs are disabled while GHCB is active
x86/sev: Split up runtime #VC handler for correct state tracking
sched/rt: Fix RT utilization tracking during policy change
sched/rt: Fix Deadline utilization tracking during policy change
sched/uclamp: Fix uclamp_tg_restrict()
lockdep: Fix wait-type for empty stack
lockdep/selftests: Fix selftests vs PROVE_RAW_LOCK_NESTING
spi: spi-sun6i: Fix chipselect/clock bug
crypto: nx - Fix RCU warning in nx842_OF_upd_status
psi: Fix race between psi_trigger_create/destroy
media: v4l2-async: Clean v4l2_async_notifier_add_fwnode_remote_subdev
media: video-mux: Skip dangling endpoints
PM / devfreq: Add missing error code in devfreq_add_device()
ACPI: PM / fan: Put fan device IDs into separate header file
block: avoid double io accounting for flush request
nvme-pci: look for StorageD3Enable on companion ACPI device instead
ACPI: sysfs: Fix a buffer overrun problem with description_show()
mark pstore-blk as broken
clocksource/drivers/timer-ti-dm: Save and restore timer TIOCP_CFG
extcon: extcon-max8997: Fix IRQ freeing at error path
ACPI: APEI: fix synchronous external aborts in user-mode
blk-wbt: introduce a new disable state to prevent false positive by rwb_enabled()
blk-wbt: make sure throttle is enabled properly
ACPI: Use DEVICE_ATTR_<RW|RO|WO> macros
ACPI: bgrt: Fix CFI violation
cpufreq: Make cpufreq_online() call driver->offline() on errors
blk-mq: update hctx->dispatch_busy in case of real scheduler
ocfs2: fix snprintf() checking
dax: fix ENOMEM handling in grab_mapping_entry()
mm/debug_vm_pgtable/basic: add validation for dirtiness after write protect
mm/debug_vm_pgtable/basic: iterate over entire protection_map[]
mm/debug_vm_pgtable: ensure THP availability via has_transparent_hugepage()
swap: fix do_swap_page() race with swapoff
mm/shmem: fix shmem_swapin() race with swapoff
mm: memcg/slab: properly set up gfp flags for objcg pointer array
mm: page_alloc: refactor setup_per_zone_lowmem_reserve()
mm/page_alloc: fix counting of managed_pages
xfrm: xfrm_state_mtu should return at least 1280 for ipv6
drm/bridge/sii8620: fix dependency on extcon
drm/bridge: Fix the stop condition of drm_bridge_chain_pre_enable()
drm/amd/dc: Fix a missing check bug in dm_dp_mst_detect()
drm/ast: Fix missing conversions to managed API
video: fbdev: imxfb: Fix an error message
net: mvpp2: Put fwnode in error case during ->probe()
net: pch_gbe: Propagate error from devm_gpio_request_one()
pinctrl: renesas: r8a7796: Add missing bias for PRESET# pin
pinctrl: renesas: r8a77990: JTAG pins do not have pull-down capabilities
drm/vmwgfx: Mark a surface gpu-dirty after the SVGA3dCmdDXGenMips command
drm/vmwgfx: Fix cpu updates of coherent multisample surfaces
net: qrtr: ns: Fix error return code in qrtr_ns_init()
clk: meson: g12a: fix gp0 and hifi ranges
net: ftgmac100: add missing error return code in ftgmac100_probe()
drm: rockchip: set alpha_en to 0 if it is not used
drm/rockchip: cdn-dp-core: add missing clk_disable_unprepare() on error in cdn_dp_grf_write()
drm/rockchip: dsi: move all lane config except LCDC mux to bind()
drm/rockchip: lvds: Fix an error handling path
drm/rockchip: cdn-dp: fix sign extension on an int multiply for a u64 result
mptcp: fix pr_debug in mptcp_token_new_connect
mptcp: generate subflow hmac after mptcp_finish_join()
RDMA/srp: Fix a recently introduced memory leak
RDMA/rtrs-clt: Check state of the rtrs_clt_sess before reading its stats
RDMA/rtrs: Do not reset hb_missed_max after re-connection
RDMA/rtrs-srv: Fix memory leak of unfreed rtrs_srv_stats object
RDMA/rtrs-srv: Fix memory leak when having multiple sessions
RDMA/rtrs-clt: Check if the queue_depth has changed during a reconnection
RDMA/rtrs-clt: Fix memory leak of not-freed sess->stats and stats->pcpu_stats
ehea: fix error return code in ehea_restart_qps()
clk: tegra30: Use 300MHz for video decoder by default
xfrm: remove the fragment check for ipv6 beet mode
net/sched: act_vlan: Fix modify to allow 0
RDMA/core: Sanitize WQ state received from the userspace
drm/pl111: depend on CONFIG_VEXPRESS_CONFIG
RDMA/rxe: Fix failure during driver load
drm/pl111: Actually fix CONFIG_VEXPRESS_CONFIG depends
drm/vc4: hdmi: Fix error path of hpd-gpios
clk: vc5: fix output disabling when enabling a FOD
drm: qxl: ensure surf.data is ininitialized
tools/bpftool: Fix error return code in do_batch()
ath10k: go to path err_unsupported when chip id is not supported
ath10k: add missing error return code in ath10k_pci_probe()
wireless: carl9170: fix LEDS build errors & warnings
ieee802154: hwsim: Fix possible memory leak in hwsim_subscribe_all_others
clk: imx8mq: remove SYS PLL 1/2 clock gates
wcn36xx: Move hal_buf allocation to devm_kmalloc in probe
ssb: Fix error return code in ssb_bus_scan()
brcmfmac: fix setting of station info chains bitmask
brcmfmac: correctly report average RSSI in station info
brcmfmac: Fix a double-free in brcmf_sdio_bus_reset
brcmsmac: mac80211_if: Fix a resource leak in an error handling path
cw1200: Revert unnecessary patches that fix unreal use-after-free bugs
ath11k: Fix an error handling path in ath11k_core_fetch_board_data_api_n()
ath10k: Fix an error code in ath10k_add_interface()
ath11k: send beacon template after vdev_start/restart during csa
netlabel: Fix memory leak in netlbl_mgmt_add_common
RDMA/mlx5: Don't add slave port to unaffiliated list
netfilter: nft_exthdr: check for IPv6 packet before further processing
netfilter: nft_osf: check for TCP packet before further processing
netfilter: nft_tproxy: restrict support to TCP and UDP transport protocols
RDMA/rxe: Fix qp reference counting for atomic ops
selftests/bpf: Whitelist test_progs.h from .gitignore
xsk: Fix missing validation for skb and unaligned mode
xsk: Fix broken Tx ring validation
bpf: Fix libelf endian handling in resolv_btfids
RDMA/rtrs-srv: Set minimal max_send_wr and max_recv_wr
samples/bpf: Fix Segmentation fault for xdp_redirect command
samples/bpf: Fix the error return code of xdp_redirect's main()
mt76: fix possible NULL pointer dereference in mt76_tx
mt76: mt7615: fix NULL pointer dereference in tx_prepare_skb()
net: ethernet: aeroflex: fix UAF in greth_of_remove
net: ethernet: ezchip: fix UAF in nps_enet_remove
net: ethernet: ezchip: fix error handling
vrf: do not push non-ND strict packets with a source LLA through packet taps again
net: sched: add barrier to ensure correct ordering for lockless qdisc
tls: prevent oversized sendfile() hangs by ignoring MSG_MORE
netfilter: nf_tables_offload: check FLOW_DISSECTOR_KEY_BASIC in VLAN transfer logic
pkt_sched: sch_qfq: fix qfq_change_class() error path
xfrm: Fix xfrm offload fallback fail case
iwlwifi: increase PNVM load timeout
rtw88: 8822c: fix lc calibration timing
vxlan: add missing rcu_read_lock() in neigh_reduce()
ip6_tunnel: fix GRE6 segmentation
net/ipv4: swap flow ports when validating source
net: ti: am65-cpsw-nuss: Fix crash when changing number of TX queues
tc-testing: fix list handling
ieee802154: hwsim: Fix memory leak in hwsim_add_one
ieee802154: hwsim: avoid possible crash in hwsim_del_edge_nl()
bpf: Fix null ptr deref with mixed tail calls and subprogs
drm/msm: Fix error return code in msm_drm_init()
drm/msm/dpu: Fix error return code in dpu_mdss_init()
mac80211: remove iwlwifi specific workaround NDPs of null_response
net: bcmgenet: Fix attaching to PYH failed on RPi 4B
ipv6: exthdrs: do not blindly use init_net
can: j1939: j1939_sk_setsockopt(): prevent allocation of j1939 filter for optlen == 0
bpf: Do not change gso_size during bpf_skb_change_proto()
i40e: Fix error handling in i40e_vsi_open
i40e: Fix autoneg disabling for non-10GBaseT links
i40e: Fix missing rtnl locking when setting up pf switch
Revert "ibmvnic: remove duplicate napi_schedule call in open function"
ibmvnic: set ltb->buff to NULL after freeing
ibmvnic: free tx_pool if tso_pool alloc fails
RDMA/cma: Protect RMW with qp_mutex
net: macsec: fix the length used to copy the key for offloading
net: phy: mscc: fix macsec key length
net: atlantic: fix the macsec key length
ipv6: fix out-of-bound access in ip6_parse_tlv()
e1000e: Check the PCIm state
net: dsa: sja1105: fix NULL pointer dereference in sja1105_reload_cbs()
bpfilter: Specify the log level for the kmsg message
RDMA/cma: Fix incorrect Packet Lifetime calculation
gve: Fix swapped vars when fetching max queues
Revert "be2net: disable bh with spin_lock in be_process_mcc"
Bluetooth: mgmt: Fix slab-out-of-bounds in tlv_data_is_valid
Bluetooth: Fix not sending Set Extended Scan Response
Bluetooth: Fix Set Extended (Scan Response) Data
Bluetooth: Fix handling of HCI_LE_Advertising_Set_Terminated event
clk: actions: Fix UART clock dividers on Owl S500 SoC
clk: actions: Fix SD clocks factor table on Owl S500 SoC
clk: actions: Fix bisp_factor_table based clocks on Owl S500 SoC
clk: actions: Fix AHPPREDIV-H-AHB clock chain on Owl S500 SoC
clk: qcom: clk-alpha-pll: fix CAL_L write in alpha_pll_fabia_prepare
clk: si5341: Wait for DEVICE_READY on startup
clk: si5341: Avoid divide errors due to bogus register contents
clk: si5341: Check for input clock presence and PLL lock on startup
clk: si5341: Update initialization magic
writeback: fix obtain a reference to a freeing memcg css
net: lwtunnel: handle MTU calculation in forwading
net: sched: fix warning in tcindex_alloc_perfect_hash
net: tipc: fix FB_MTU eat two pages
RDMA/mlx5: Don't access NULL-cleared mpi pointer
RDMA/core: Always release restrack object
MIPS: Fix PKMAP with 32-bit MIPS huge page support
staging: fbtft: Rectify GPIO handling
staging: fbtft: Don't spam logs when probe is deferred
ASoC: rt5682: Disable irq on shutdown
rcu: Invoke rcu_spawn_core_kthreads() from rcu_spawn_gp_kthread()
serial: fsl_lpuart: don't modify arbitrary data on lpuart32
serial: fsl_lpuart: remove RTSCTS handling from get_mctrl()
serial: 8250_omap: fix a timeout loop condition
tty: nozomi: Fix a resource leak in an error handling function
mwifiex: re-fix for unaligned accesses
iio: adis_buffer: do not return ints in irq handlers
iio: adis16400: do not return ints in irq handlers
iio: adis16475: do not return ints in irq handlers
iio: accel: bma180: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: accel: bma220: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: accel: hid: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: accel: kxcjk-1013: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: accel: mxc4005: Fix overread of data and alignment issue.
iio: accel: stk8312: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: accel: stk8ba50: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: adc: ti-ads1015: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: adc: vf610: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: gyro: bmg160: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: humidity: am2315: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: prox: srf08: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: prox: pulsed-light: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: prox: as3935: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: magn: hmc5843: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: magn: bmc150: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: light: isl29125: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: light: tcs3414: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: light: tcs3472: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: chemical: atlas: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: cros_ec_sensors: Fix alignment of buffer in iio_push_to_buffers_with_timestamp()
iio: potentiostat: lmp91000: Fix alignment of buffer in iio_push_to_buffers_with_timestamp()
ASoC: rk3328: fix missing clk_disable_unprepare() on error in rk3328_platform_probe()
ASoC: hisilicon: fix missing clk_disable_unprepare() on error in hi6210_i2s_startup()
backlight: lm3630a_bl: Put fwnode in error case during ->probe()
ASoC: rsnd: tidyup loop on rsnd_adg_clk_query()
Input: hil_kbd - fix error return code in hil_dev_connect()
perf scripting python: Fix tuple_set_u64()
mtd: partitions: redboot: seek fis-index-block in the right node
mtd: rawnand: arasan: Ensure proper configuration for the asserted target
staging: mmal-vchiq: Fix incorrect static vchiq_instance.
char: pcmcia: error out if 'num_bytes_read' is greater than 4 in set_protocol()
firmware: stratix10-svc: Fix a resource leak in an error handling path
tty: nozomi: Fix the error handling path of 'nozomi_card_init()'
leds: class: The -ENOTSUPP should never be seen by user space
leds: lm3532: select regmap I2C API
leds: lm36274: Put fwnode in error case during ->probe()
leds: lm3692x: Put fwnode in any case during ->probe()
leds: lm3697: Don't spam logs when probe is deferred
leds: lp50xx: Put fwnode in error case during ->probe()
scsi: FlashPoint: Rename si_flags field
scsi: iscsi: Flush block work before unblock
mfd: mp2629: Select MFD_CORE to fix build error
mfd: rn5t618: Fix IRQ trigger by changing it to level mode
fsi: core: Fix return of error values on failures
fsi: scom: Reset the FSI2PIB engine for any error
fsi: occ: Don't accept response from un-initialized OCC
fsi/sbefifo: Clean up correct FIFO when receiving reset request from SBE
fsi/sbefifo: Fix reset timeout
visorbus: fix error return code in visorchipset_init()
iommu/amd: Fix extended features logging
s390/irq: select HAVE_IRQ_EXIT_ON_IRQ_STACK
s390: enable HAVE_IOREMAP_PROT
s390: appldata depends on PROC_SYSCTL
selftests: splice: Adjust for handler fallback removal
iommu/dma: Fix IOVA reserve dma ranges
ASoC: max98373-sdw: use first_hw_init flag on resume
ASoC: rt1308-sdw: use first_hw_init flag on resume
ASoC: rt5682-sdw: use first_hw_init flag on resume
ASoC: rt700-sdw: use first_hw_init flag on resume
ASoC: rt711-sdw: use first_hw_init flag on resume
ASoC: rt715-sdw: use first_hw_init flag on resume
ASoC: rt5682: fix getting the wrong device id when the suspend_stress_test
ASoC: rt5682-sdw: set regcache_cache_only false before reading RT5682_DEVICE_ID
ASoC: mediatek: mtk-btcvsd: Fix an error handling path in 'mtk_btcvsd_snd_probe()'
usb: gadget: f_fs: Fix setting of device and driver data cross-references
usb: dwc2: Don't reset the core after setting turnaround time
eeprom: idt_89hpesx: Put fwnode in matching case during ->probe()
eeprom: idt_89hpesx: Restore printing the unsupported fwnode name
thunderbolt: Bond lanes only when dual_link_port != NULL in alloc_dev_default()
iio: adc: at91-sama5d2: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: adc: hx711: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: adc: mxs-lradc: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: adc: ti-ads8688: Fix alignment of buffer in iio_push_to_buffers_with_timestamp()
iio: magn: rm3100: Fix alignment of buffer in iio_push_to_buffers_with_timestamp()
iio: light: vcnl4000: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
ASoC: fsl_spdif: Fix error handler with pm_runtime_enable
staging: gdm724x: check for buffer overflow in gdm_lte_multi_sdu_pkt()
staging: gdm724x: check for overflow in gdm_lte_netif_rx()
staging: rtl8712: fix error handling in r871xu_drv_init
staging: rtl8712: fix memory leak in rtl871x_load_fw_cb
coresight: core: Fix use of uninitialized pointer
staging: mt7621-dts: fix pci address for PCI memory range
serial: 8250: Actually allow UPF_MAGIC_MULTIPLIER baud rates
iio: light: vcnl4035: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: prox: isl29501: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
ASoC: cs42l42: Correct definition of CS42L42_ADC_PDN_MASK
of: Fix truncation of memory sizes on 32-bit platforms
mtd: rawnand: marvell: add missing clk_disable_unprepare() on error in marvell_nfc_resume()
habanalabs: Fix an error handling path in 'hl_pci_probe()'
scsi: mpt3sas: Fix error return value in _scsih_expander_add()
soundwire: stream: Fix test for DP prepare complete
phy: uniphier-pcie: Fix updating phy parameters
phy: ti: dm816x: Fix the error handling path in 'dm816x_usb_phy_probe()
extcon: sm5502: Drop invalid register write in sm5502_reg_data
extcon: max8997: Add missing modalias string
powerpc/powernv: Fix machine check reporting of async store errors
ASoC: atmel-i2s: Fix usage of capture and playback at the same time
configfs: fix memleak in configfs_release_bin_file
ASoC: Intel: sof_sdw: add SOF_RT715_DAI_ID_FIX for AlderLake
ASoC: fsl_spdif: Fix unexpected interrupt after suspend
leds: as3645a: Fix error return code in as3645a_parse_node()
leds: ktd2692: Fix an error handling path
selftests/ftrace: fix event-no-pid on 1-core machine
serial: 8250: 8250_omap: Disable RX interrupt after DMA enable
serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs
powerpc: Offline CPU in stop_this_cpu()
powerpc/papr_scm: Properly handle UUID types and API
powerpc/64s: Fix copy-paste data exposure into newly created tasks
powerpc/papr_scm: Make 'perf_stats' invisible if perf-stats unavailable
ALSA: firewire-lib: Fix 'amdtp_domain_start()' when no AMDTP_OUT_STREAM stream is found
serial: mvebu-uart: do not allow changing baudrate when uartclk is not available
serial: mvebu-uart: correctly calculate minimal possible baudrate
arm64: dts: marvell: armada-37xx: Fix reg for standard variant of UART
vfio/pci: Handle concurrent vma faults
mm/pmem: avoid inserting hugepage PTE entry with fsdax if hugepage support is disabled
mm/huge_memory.c: remove dedicated macro HPAGE_CACHE_INDEX_MASK
mm/huge_memory.c: add missing read-only THP checking in transparent_hugepage_enabled()
mm/huge_memory.c: don't discard hugepage if other processes are mapping it
mm/hugetlb: use helper huge_page_order and pages_per_huge_page
mm/hugetlb: remove redundant check in preparing and destroying gigantic page
hugetlb: remove prep_compound_huge_page cleanup
include/linux/huge_mm.h: remove extern keyword
mm/z3fold: fix potential memory leak in z3fold_destroy_pool()
mm/z3fold: use release_z3fold_page_locked() to release locked z3fold page
lib/math/rational.c: fix divide by zero
selftests/vm/pkeys: fix alloc_random_pkey() to make it really, really random
selftests/vm/pkeys: handle negative sys_pkey_alloc() return code
selftests/vm/pkeys: refill shadow register after implicit kernel write
perf llvm: Return -ENOMEM when asprintf() fails
csky: fix syscache.c fallthrough warning
csky: syscache: Fixup duplicate cache flush
exfat: handle wrong stream entry size in exfat_readdir()
scsi: fc: Correct RHBA attributes length
scsi: target: cxgbit: Unmap DMA buffer before calling target_execute_cmd()
mailbox: qcom-ipcc: Fix IPCC mbox channel exhaustion
fscrypt: don't ignore minor_hash when hash is 0
fscrypt: fix derivation of SipHash keys on big endian CPUs
tpm: Replace WARN_ONCE() with dev_err_once() in tpm_tis_status()
erofs: fix error return code in erofs_read_superblock()
block: return the correct bvec when checking for gaps
io_uring: fix blocking inline submission
mmc: block: Disable CMDQ on the ioctl path
mmc: vub3000: fix control-request direction
media: exynos4-is: remove a now unused integer
scsi: core: Retry I/O for Notify (Enable Spinup) Required error
crypto: qce - fix error return code in qce_skcipher_async_req_handle()
s390: preempt: Fix preempt_count initialization
cred: add missing return error code when set_cred_ucounts() failed
iommu/dma: Fix compile warning in 32-bit builds
powerpc/preempt: Don't touch the idle task's preempt_count during hotplug
Linux 5.10.50
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Iec4eab24ea8eb5a6d79739a1aec8432d93a8f82c
|
||
|
Valentin Schneider
|
3c51d82d0b |
sched/core: Initialize the idle task with preemption disabled
[ Upstream commit |
||
|
Marc Zyngier
|
951bdfd077 |
FROMLIST: arm: Mark the recheduling IPI as raw interrupt
Flag the rescheduling IPI as 'raw', making sure such interrupt skips both tick management and irqtime accounting. Bug: 191808738 Link: https://lore.kernel.org/lkml/20201124141449.572446-5-maz@kernel.org/ Change-Id: Ia9c2b989621eef6f49a1c30a08302a448ae286e6 Signed-off-by: Marc Zyngier <maz@kernel.org> [minor port to 5.10] Signed-off-by: Stephen Dickey <dickey@codeaurora.org> |
||
|
Lina Iyer
|
c4d042a643 |
ANDROID: arm: allow hooks into ipi
Allow drivers to register hooks when IPIs are sent and handled. The statistics of these IPIs are helpful in predicting CPU idle states. Bug: 172588415 Signed-off-by: Lina Iyer <ilina@codeaurora.org> Change-Id: I3706743ee4077157f8205870cecfff92841f40ce |
||
|
Marc Zyngier
|
c6ed9c53ba |
FROMGIT: ARM: Handle no IPI being registered in show_ipi_list()
As SMP-on-UP is a valid configuration on 32bit ARM, do not assume that
IPIs are populated in show_ipi_list().
Reported-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Reported-by: kernelci.org bot <bot@kernelci.org>
Tested-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Bug: 140053385
(cherry picked from commit
|
||
|
Marc Zyngier
|
207021f2ce |
FROMGIT: arm: Move ipi_teardown() to a CONFIG_HOTPLUG_CPU section
ipi_teardown() is only used when CONFIG_HOTPLUG_CPU is enabled.
Move the function to a location guarded by this config option.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Bug: 140053385
(cherry picked from commit
|
||
|
Marc Zyngier
|
1733bb1181 |
FROMGIT: ARM: Remove custom IRQ stat accounting
Let's switch the arm code to the core accounting, which already
does everything we need.
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Bug: 140053385
(cherry picked from commit
|
||
|
Marc Zyngier
|
4b884506f2 |
FROMGIT: ARM: Kill __smp_cross_call and co
The old IPI registration interface is now unused on arm, so let's
get rid of it.
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Bug: 140053385
(cherry picked from commit
|
||
|
Marc Zyngier
|
a07218695f |
FROMGIT: ARM: Allow IPIs to be handled as normal interrupts
In order to deal with IPIs as normal interrupts, let's add
a new way to register them with the architecture code.
set_smp_ipi_range() takes a range of interrupts, and allows
the arch code to request them as if the were normal interrupts.
A standard handler is then called by the core IRQ code to deal
with the IPI.
This means that we don't need to call irq_enter/irq_exit, and
that we don't need to deal with set_irq_regs either. So let's
move the dispatcher into its own function, and leave handle_IPI()
as a compatibility function.
On the sending side, let's make use of ipi_send_mask, which
already exists for this purpose.
One of the major difference is that we end up, in some cases
(such as when performing IRQ time accounting on the scheduler
IPI), end up with nested irq_enter()/irq_exit() pairs.
Other than the (relatively small) overhead, there should be
no consequences to it (these pairs are designed to nest
correctly, and the accounting shouldn't be off).
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Bug: 140053385
(cherry picked from commit
|
||
|
Marc Zyngier
|
220387048d |
ARM: Handle no IPI being registered in show_ipi_list()
As SMP-on-UP is a valid configuration on 32bit ARM, do not assume that IPIs are populated in show_ipi_list(). Reported-by: Guillaume Tucker <guillaume.tucker@collabora.com> Reported-by: kernelci.org bot <bot@kernelci.org> Tested-by: Guillaume Tucker <guillaume.tucker@collabora.com> Signed-off-by: Marc Zyngier <maz@kernel.org> |
||
|
Marc Zyngier
|
ac15a54e03 |
arm: Move ipi_teardown() to a CONFIG_HOTPLUG_CPU section
ipi_teardown() is only used when CONFIG_HOTPLUG_CPU is enabled. Move the function to a location guarded by this config option. Signed-off-by: Marc Zyngier <maz@kernel.org> |
||
|
Marc Zyngier
|
5ebf353af2 |
ARM: Remove custom IRQ stat accounting
Let's switch the arm code to the core accounting, which already does everything we need. Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> |
||
|
Marc Zyngier
|
8aa837cb7a |
ARM: Kill __smp_cross_call and co
The old IPI registration interface is now unused on arm, so let's get rid of it. Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> |
||
|
Marc Zyngier
|
56afcd3dbd |
ARM: Allow IPIs to be handled as normal interrupts
In order to deal with IPIs as normal interrupts, let's add a new way to register them with the architecture code. set_smp_ipi_range() takes a range of interrupts, and allows the arch code to request them as if the were normal interrupts. A standard handler is then called by the core IRQ code to deal with the IPI. This means that we don't need to call irq_enter/irq_exit, and that we don't need to deal with set_irq_regs either. So let's move the dispatcher into its own function, and leave handle_IPI() as a compatibility function. On the sending side, let's make use of ipi_send_mask, which already exists for this purpose. One of the major difference is that we end up, in some cases (such as when performing IRQ time accounting on the scheduler IPI), end up with nested irq_enter()/irq_exit() pairs. Other than the (relatively small) overhead, there should be no consequences to it (these pairs are designed to nest correctly, and the accounting shouldn't be off). Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> |
||
|
Mike Rapoport
|
ca15ca406f |
mm: remove unneeded includes of <asm/pgalloc.h>
Patch series "mm: cleanup usage of <asm/pgalloc.h>"
Most architectures have very similar versions of pXd_alloc_one() and
pXd_free_one() for intermediate levels of page table. These patches add
generic versions of these functions in <asm-generic/pgalloc.h> and enable
use of the generic functions where appropriate.
In addition, functions declared and defined in <asm/pgalloc.h> headers are
used mostly by core mm and early mm initialization in arch and there is no
actual reason to have the <asm/pgalloc.h> included all over the place.
The first patch in this series removes unneeded includes of
<asm/pgalloc.h>
In the end it didn't work out as neatly as I hoped and moving
pXd_alloc_track() definitions to <asm-generic/pgalloc.h> would require
unnecessary changes to arches that have custom page table allocations, so
I've decided to move lib/ioremap.c to mm/ and make pgalloc-track.h local
to mm/.
This patch (of 8):
In most cases <asm/pgalloc.h> header is required only for allocations of
page table memory. Most of the .c files that include that header do not
use symbols declared in <asm/pgalloc.h> and do not require that header.
As for the other header files that used to include <asm/pgalloc.h>, it is
possible to move that include into the .c file that actually uses symbols
from <asm/pgalloc.h> and drop the include from the header file.
The process was somewhat automated using
sed -i -E '/[<"]asm\/pgalloc\.h/d' \
$(grep -L -w -f /tmp/xx \
$(git grep -E -l '[<"]asm/pgalloc\.h'))
where /tmp/xx contains all the symbols defined in
arch/*/include/asm/pgalloc.h.
[rppt@linux.ibm.com: fix powerpc warning]
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Link: http://lkml.kernel.org/r/20200627143453.31835-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200627143453.31835-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Mike Rapoport
|
e31cf2f4ca |
mm: don't include asm/pgtable.h if linux/mm.h is already included
Patch series "mm: consolidate definitions of page table accessors", v2.
The low level page table accessors (pXY_index(), pXY_offset()) are
duplicated across all architectures and sometimes more than once. For
instance, we have 31 definition of pgd_offset() for 25 supported
architectures.
Most of these definitions are actually identical and typically it boils
down to, e.g.
static inline unsigned long pmd_index(unsigned long address)
{
return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}
static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
{
return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
}
These definitions can be shared among 90% of the arches provided
XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined.
For architectures that really need a custom version there is always
possibility to override the generic version with the usual ifdefs magic.
These patches introduce include/linux/pgtable.h that replaces
include/asm-generic/pgtable.h and add the definitions of the page table
accessors to the new header.
This patch (of 12):
The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the
functions involving page table manipulations, e.g. pte_alloc() and
pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h>
in the files that include <linux/mm.h>.
The include statements in such cases are remove with a simple loop:
for f in $(git grep -l "include <linux/mm.h>") ; do
sed -i -e '/include <asm\/pgtable.h>/ d' $f
done
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Dietmar Eggemann
|
ff98a5f624 |
ARM: 8943/1: Fix topology setup in case of CPU hotplug for CONFIG_SCHED_MC
Commit |
||
|
Paul E. McKenney
|
1d5087ab96 |
arm: Use common outgoing-CPU-notification code
This commit removes the open-coded CPU-offline notification with new common code. In particular, this change avoids calling scheduler code using RCU from an offline CPU that RCU is ignoring. This is a minimal change. A more intrusive change might invoke the cpu_check_up_prepare() and cpu_set_state_online() functions at CPU-online time, which would allow onlining throw an error if the CPU did not go offline properly. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Russell King <linux@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> |
||
|
Linus Torvalds
|
2b49350b16 |
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King: - Add a "cut here" to make it clearer where oops dumps should be cut from - we already have a marker for the end of the dumps. - Add logging severity to show_pte() - Drop unnecessary common-page-size linker flag - Errata workarounds for Cortex A12 857271, Cortex A17 857272 and Cortex A7 814220. - Remove some unused variables that had started to provoke a compiler warning. * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8863/1: stm32: select ARM errata 814220 ARM: 8862/1: errata: 814220-B-Cache maintenance by set/way operations can execute out of order ARM: 8865/1: mm: remove unused variables ARM: 8864/1: Add workaround for I-Cache line size mismatch between CPU cores ARM: 8861/1: errata: Workaround errata A12 857271 / A17 857272 ARM: 8860/1: VDSO: Drop implicit common-page-size linker flag ARM: arrange show_pte() to issue severity-based messages ARM: add "8<--- cut here ---" to kernel dumps |
||
|
Marek Szyprowski
|
5f41f9198f |
ARM: 8864/1: Add workaround for I-Cache line size mismatch between CPU cores
Some big.LITTLE systems have I-Cache line size mismatch between
LITTLE and big cores. This patch adds a workaround for proper I-Cache
support on such systems. Without it, some class of the userspace code
(typically self-modifying) might suffer from random SIGILL failures.
Similar workaround already exists for ARM64 architecture. I has been
added by commit
|
||
|
Thomas Gleixner
|
d2912cb15b |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Linus Torvalds
|
bfbfbf7368 |
Merge tag 'pm-5.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These fix a recent regression causing kernels built with CONFIG_PM
unset to crash on systems that support the Performance and Energy Bias
Hint (EPB), clean up the cpufreq core and some users of transition
notifiers and introduce a new power domain flag into the generic power
domains framework (genpd).
Specifics:
- Fix recent regression causing kernels built with CONFIG_PM unset to
crash on systems that support the Performance and Energy Bias Hint
(EPB) by avoiding to compile the EPB-related code depending on
CONFIG_PM when it is unset (Rafael Wysocki).
- Clean up the transition notifier invocation code in the cpufreq
core and change some users of cpufreq transition notifiers
accordingly (Viresh Kumar).
- Change MAINTAINERS to cover the schedutil governor as part of
cpufreq (Viresh Kumar).
- Simplify cpufreq_init_policy() to avoid redundant computations (Yue
Hu).
- Add explanatory comment to the cpufreq core (Rafael Wysocki).
- Introduce a new flag, GENPD_FLAG_RPM_ALWAYS_ON, to the generic
power domains (genpd) framework along with the first user of it
(Leonard Crestez)"
* tag 'pm-5.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
soc: imx: gpc: Use GENPD_FLAG_RPM_ALWAYS_ON for ERR009619
PM / Domains: Add GENPD_FLAG_RPM_ALWAYS_ON flag
cpufreq: Update MAINTAINERS to include schedutil governor
cpufreq: Don't find governor for setpolicy drivers in cpufreq_init_policy()
cpufreq: Explain the kobject_put() in cpufreq_policy_alloc()
cpufreq: Call transition notifier only once for each policy
x86: intel_epb: Take CONFIG_PM into account
|
||
|
Arnd Bergmann
|
be167862ae |
ARM: prevent tracing IPI_CPU_BACKTRACE
Patch series "compiler: allow all arches to enable
CONFIG_OPTIMIZE_INLINING", v3.
This patch (of 11):
When function tracing for IPIs is enabled, we get a warning for an
overflow of the ipi_types array with the IPI_CPU_BACKTRACE type as
triggered by raise_nmi():
arch/arm/kernel/smp.c: In function 'raise_nmi':
arch/arm/kernel/smp.c:489:2: error: array subscript is above array bounds [-Werror=array-bounds]
trace_ipi_raise(target, ipi_types[ipinr]);
This is a correct warning as we actually overflow the array here.
This patch raise_nmi() to call __smp_cross_call() instead of
smp_cross_call(), to avoid calling into ftrace. For clarification, I'm
also adding a two new code comments describing how this one is special.
The warning appears to have shown up after commit
|
||
|
Viresh Kumar
|
df24014abe |
cpufreq: Call transition notifier only once for each policy
Currently, the notifiers are called once for each CPU of the policy->cpus cpumask. It would be more optimal if the notifier can be called only once and all the relevant information be provided to it. Out of the 23 drivers that register for the transition notifiers today, only 4 of them do per-cpu updates and the callback for the rest can be called only once for the policy without any impact. This would also avoid multiple function calls to the notifier callbacks and reduce multiple iterations of notifier core's code (which does locking as well). This patch adds pointer to the cpufreq policy to the struct cpufreq_freqs, so the notifier callback has all the information available to it with a single call. The five drivers which perform per-cpu updates are updated to use the cpufreq policy. The freqs->cpu field is redundant now and is removed. Acked-by: David S. Miller <davem@davemloft.net> (sparc) Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Russell King
|
4c2741ac5e | Merge branches 'fixes', 'misc' and 'smp-hotplug' into for-next | ||
|
Russell King
|
5388a5b821 |
ARM: avoid Cortex-A9 livelock on tight dmb loops
machine_crash_nonpanic_core() does this:
while (1)
cpu_relax();
because the kernel has crashed, and we have no known safe way to deal
with the CPU. So, we place the CPU into an infinite loop which we
expect it to never exit - at least not until the system as a whole is
reset by some method.
In the absence of erratum 754327, this code assembles to:
b .
In other words, an infinite loop. When erratum 754327 is enabled,
this becomes:
1: dmb
b 1b
It has been observed that on some systems (eg, OMAP4) where, if a
crash is triggered, the system tries to kexec into the panic kernel,
but fails after taking the secondary CPU down - placing it into one
of these loops. This causes the system to livelock, and the most
noticable effect is the system stops after issuing:
Loading crashdump kernel...
to the system console.
The tested as working solution I came up with was to add wfe() to
these infinite loops thusly:
while (1) {
cpu_relax();
wfe();
}
which, without 754327 builds to:
1: wfe
b 1b
or with 754327 is enabled:
1: dmb
wfe
b 1b
Adding "wfe" does two things depending on the environment we're running
under:
- where we're running on bare metal, and the processor implements
"wfe", it stops us spinning endlessly in a loop where we're never
going to do any useful work.
- if we're running in a VM, it allows the CPU to be given back to the
hypervisor and rescheduled for other purposes (maybe a different VM)
rather than wasting CPU cycles inside a crashed VM.
However, in light of erratum 794072, Will Deacon wanted to see 10 nops
as well - which is reasonable to cover the case where we have erratum
754327 enabled _and_ we have a processor that doesn't implement the
wfe hint.
So, we now end up with:
1: wfe
b 1b
when erratum 754327 is disabled, or:
1: dmb
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
wfe
b 1b
when erratum 754327 is enabled. We also get the dmb + 10 nop
sequence elsewhere in the kernel, in terminating loops.
This is reasonable - it means we get the workaround for erratum
794072 when erratum 754327 is enabled, but still relinquish the dead
processor - either by placing it in a lower power mode when wfe is
implemented as such or by returning it to the hypervisior, or in the
case where wfe is a no-op, we use the workaround specified in erratum
794072 to avoid the problem.
These as two entirely orthogonal problems - the 10 nops addresses
erratum 794072, and the wfe is an optimisation that makes the system
more efficient when crashed either in terms of power consumption or
by allowing the host/other VMs to make use of the CPU.
I don't see any reason not to use kexec() inside a VM - it has the
potential to provide automated recovery from a failure of the VMs
kernel with the opportunity for saving a crashdump of the failure.
A panic() with a reboot timeout won't do that, and reading the
libvirt documentation, setting on_reboot to "preserve" won't either
(the documentation states "The preserve action for an on_reboot event
is treated as a destroy".) Surely it has to be a good thing to
avoiding having CPUs spinning inside a VM that is doing no useful
work.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
||
|
Russell King
|
6213f70e7c |
ARM: smp: remove arch-provided "pen_release"
Consolidating the "pen_release" stuff amongst the various SoC implementations gives credence to having a CPU holding pen for secondary CPUs. However, this is far from the truth. Many SoC implementations cargo-cult copied various bits of the pen release implementation from the initial Realview/Versatile Express implementation without understanding what it was or why it existed. The reason it existed is because these are _development_ platforms, and some board firmware is unable to individually control the startup of secondary CPUs. Moreover, they do not have a way to power down or reset secondary CPUs for hot-unplug. Hence, the pen_release implementation was designed for ARM Ltd's development platforms to provide a working implementation, even though it is very far from what is required. It was decided a while back to reduce the duplication by consolidating the "pen_release" variable, but this only made the situation worse - we have ended up with several implementations that read this variable but do not write it - again, showing the cargo-cult mentality at work, lack of proper review of new code, and in some cases a lack of testing. While it would be preferable to remove pen_release entirely from the kernel, this is not possible without help from the SoC maintainers, which seems to be lacking. However, I want to remove pen_release from arch code to remove the credence that having it gives. This patch removes pen_release from the arch code entirely, adding private per-SoC definitions for it instead, and explicitly stating that write_pen_release() is cargo-cult copied and should not be copied any further. Rename write_pen_release() in a similar fashion as well. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> |
||
|
Dietmar Eggemann
|
1b5ba35078 |
ARM: 8824/1: fix a migrating irq bug when hotplug cpu
Arm TC2 fails cpu hotplug stress test.
This issue was tracked down to a missing copy of the new affinity
cpumask for the vexpress-spc interrupt into struct
irq_common_data.affinity when the interrupt is migrated in
migrate_one_irq().
Fix it by replacing the arm specific hotplug cpu migration with the
generic irq code.
This is the counterpart implementation to commit
|
||
|
Russell King
|
97b6f89f72 | Merge branches 'misc', 'sa1100-for-next' and 'spectre' into for-linus | ||
|
Russell King
|
383fb3ee80 |
ARM: spectre-v2: per-CPU vtables to work around big.Little systems
In big.Little systems, some CPUs require the Spectre workarounds in paths such as the context switch, but other CPUs do not. In order to handle these differences, we need per-CPU vtables. We are unable to use the kernel's per-CPU variables to support this as per-CPU is not initialised at times when we need access to the vtables, so we have to use an array indexed by logical CPU number. We use an array-of-pointers to avoid having function pointers in the kernel's read/write .data section. Reviewed-by: Julien Thierry <julien.thierry@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> |
||
|
Yufen Wang
|
82c08c3e7f |
ARM: 8808/1: kexec:offline panic_smp_self_stop CPU
In case panic() and panic() called at the same time on different CPUS.
For example:
CPU 0:
panic()
__crash_kexec
machine_crash_shutdown
crash_smp_send_stop
machine_kexec
BUG_ON(num_online_cpus() > 1);
CPU 1:
panic()
local_irq_disable
panic_smp_self_stop
If CPU 1 calls panic_smp_self_stop() before crash_smp_send_stop(), kdump
fails. CPU1 can't receive the ipi irq, CPU1 will be always online.
To fix this problem, this patch split out the panic_smp_self_stop()
and add set_cpu_online(smp_processor_id(), false).
Signed-off-by: Yufen Wang <wangyufen@huawei.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
||
|
Russell King
|
0ac000e867 | Merge branches 'fixes', 'misc' and 'spectre' into for-linus | ||
|
Russell King
|
26602161b5 |
ARM: bugs: hook processor bug checking into SMP and suspend paths
Check for CPU bugs when secondary processors are being brought online, and also when CPUs are resuming from a low power mode. This gives an opportunity to check that processor specific bug workarounds are correctly enabled for all paths that a CPU re-enters the kernel. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Boot-tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> |
||
|
Grygorii Strashko
|
98f1b5a762 |
ARM: 8765/1: smp: Move clear_tasks_mm_cpumask() call to __cpu_die()
Suspending a CPU on a RT kernel results in the following backtrace: | Disabling non-boot CPUs ... | BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:917 | in_atomic(): 1, irqs_disabled(): 128, pid: 18, name: migration/1 | INFO: lockdep is turned off. | irq event stamp: 122 | hardirqs last enabled at (121): [<c06ac0ac>] _raw_spin_unlock_irqrestore+0x88/0x90 | hardirqs last disabled at (122): [<c06abed0>] _raw_spin_lock_irq+0x28/0x5c | CPU: 1 PID: 18 Comm: migration/1 Tainted: G W 4.1.4-rt3-01046-g96ac8da #204 | Hardware name: Generic DRA74X (Flattened Device Tree) | [<c0019134>] (unwind_backtrace) from [<c0014774>] (show_stack+0x20/0x24) | [<c0014774>] (show_stack) from [<c06a70f4>] (dump_stack+0x88/0xdc) | [<c06a70f4>] (dump_stack) from [<c006cab8>] (___might_sleep+0x198/0x2a8) | [<c006cab8>] (___might_sleep) from [<c06ac4dc>] (rt_spin_lock+0x30/0x70) | [<c06ac4dc>] (rt_spin_lock) from [<c013f790>] (find_lock_task_mm+0x9c/0x174) | [<c013f790>] (find_lock_task_mm) from [<c00409ac>] (clear_tasks_mm_cpumask+0xb4/0x1ac) | [<c00409ac>] (clear_tasks_mm_cpumask) from [<c00166a4>] (__cpu_disable+0x98/0xbc) | [<c00166a4>] (__cpu_disable) from [<c06a2e8c>] (take_cpu_down+0x1c/0x50) | [<c06a2e8c>] (take_cpu_down) from [<c00f2600>] (multi_cpu_stop+0x11c/0x158) | [<c00f2600>] (multi_cpu_stop) from [<c00f2a9c>] (cpu_stopper_thread+0xc4/0x184) | [<c00f2a9c>] (cpu_stopper_thread) from [<c0069058>] (smpboot_thread_fn+0x18c/0x324) | [<c0069058>] (smpboot_thread_fn) from [<c00649c4>] (kthread+0xe8/0x104) | [<c00649c4>] (kthread) from [<c0010058>] (ret_from_fork+0x14/0x3c) | CPU1: shutdown The root cause of above backtrace is task_lock() which takes a sleeping lock on -RT. To fix the issue, move clear_tasks_mm_cpumask() call from __cpu_disable() to __cpu_die() which is called on the thread which is asking for a target CPU to be shutdown. In addition, this change restores CPU hotplug functionality on ARM CPU1 can be unplugged/plugged many times. Link: http://lkml.kernel.org/r/1441995683-30817-1-git-send-email-grygorii.strashko@ti.com [bigeasy: slighty edited the commit message] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> |
||
|
Vladimir Murzin
|
62d1c95d57 |
ARM: 8739/1: NOMMU: Setup VBAR/Hivecs for secondaries cores
With switch to dynamic exception base address setting, VBAR/Hivecs
set only for boot CPU, but secondaries stay unaware of that. That
might lead to weird effects when trying up to bring up secondaries.
Fixes:
|
||
|
Vladimir Murzin
|
a0995c0805 |
ARM: 8708/1: NOMMU: Rework MPU to be mostly done in C
Currently, there are several issues with how MPU is setup: 1. We won't boot if MPU is missing 2. We won't boot if use XIP 3. Further extension of MPU setup requires asm skills The 1st point can be relaxed, so we can continue with boot CPU even if MPU is missed and fail boot for secondaries only. To address the 2nd point we could create region covering CONFIG_XIP_PHYS_ADDR - _end and that might work for the first stage of MPU enable, but due to MPU's alignment requirement we could cover too much, IOW we need more flexibility in how we're partitioning memory regions... and it'd be hardly possible to archive because of the 3rd point. This patch is trying to address 1st and 3rd issues and paves the path for 2nd and further improvements. The most visible change introduced with this patch is that we start using mpu_rgn_info array (as it was supposed?), so change in MPU setup done by boot CPU is recorded there and feed to secondaries. It allows us to keep minimal region setup for boot CPU and do the rest in C. Since we start programming MPU regions in C evaluation of MPU constrains (number of regions supported and minimal region order) can be done once, which in turn open possibility to free-up "probe" region early. Tested-by: Szemző András <sza@esh.hu> Tested-by: Alexandre TORGUE <alexandre.torgue@st.com> Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> |
||
|
Thomas Gleixner
|
5976a66913 |
arm: Adjust system_state check
To enable smp_processor_id() and might_sleep() debug checks earlier, it's required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING. Adjust the system_state check in ipi_cpu_stop() to handle the extra states. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/20170516184735.020718977@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Ingo Molnar
|
68e21be291 |
sched/headers: Move task->mm handling methods to <linux/sched/mm.h>
Move the following task->mm helper APIs into a new header file, <linux/sched/mm.h>, to further reduce the size and complexity of <linux/sched.h>. Here are how the APIs are used in various kernel files: # mm_alloc(): arch/arm/mach-rpc/ecard.c fs/exec.c include/linux/sched/mm.h kernel/fork.c # __mmdrop(): arch/arc/include/asm/mmu_context.h include/linux/sched/mm.h kernel/fork.c # mmdrop(): arch/arm/mach-rpc/ecard.c arch/m68k/sun3/mmu_emu.c arch/x86/mm/tlb.c drivers/gpu/drm/amd/amdkfd/kfd_process.c drivers/gpu/drm/i915/i915_gem_userptr.c drivers/infiniband/hw/hfi1/file_ops.c drivers/vfio/vfio_iommu_spapr_tce.c fs/exec.c fs/proc/base.c fs/proc/task_mmu.c fs/proc/task_nommu.c fs/userfaultfd.c include/linux/mmu_notifier.h include/linux/sched/mm.h kernel/fork.c kernel/futex.c kernel/sched/core.c mm/khugepaged.c mm/ksm.c mm/mmu_context.c mm/mmu_notifier.c mm/oom_kill.c virt/kvm/kvm_main.c # mmdrop_async_fn(): include/linux/sched/mm.h # mmdrop_async(): include/linux/sched/mm.h kernel/fork.c # mmget_not_zero(): fs/userfaultfd.c include/linux/sched/mm.h mm/oom_kill.c # mmput(): arch/arc/include/asm/mmu_context.h arch/arc/kernel/troubleshoot.c arch/frv/mm/mmu-context.c arch/powerpc/platforms/cell/spufs/context.c arch/sparc/include/asm/mmu_context_32.h drivers/android/binder.c drivers/gpu/drm/etnaviv/etnaviv_gem.c drivers/gpu/drm/i915/i915_gem_userptr.c drivers/infiniband/core/umem.c drivers/infiniband/core/umem_odp.c drivers/infiniband/core/uverbs_main.c drivers/infiniband/hw/mlx4/main.c drivers/infiniband/hw/mlx5/main.c drivers/infiniband/hw/usnic/usnic_uiom.c drivers/iommu/amd_iommu_v2.c drivers/iommu/intel-svm.c drivers/lguest/lguest_user.c drivers/misc/cxl/fault.c drivers/misc/mic/scif/scif_rma.c drivers/oprofile/buffer_sync.c drivers/vfio/vfio_iommu_type1.c drivers/vhost/vhost.c drivers/xen/gntdev.c fs/exec.c fs/proc/array.c fs/proc/base.c fs/proc/task_mmu.c fs/proc/task_nommu.c fs/userfaultfd.c include/linux/sched/mm.h kernel/cpuset.c kernel/events/core.c kernel/events/uprobes.c kernel/exit.c kernel/fork.c kernel/ptrace.c kernel/sys.c kernel/trace/trace_output.c kernel/tsacct.c mm/memcontrol.c mm/memory.c mm/mempolicy.c mm/migrate.c mm/mmu_notifier.c mm/nommu.c mm/oom_kill.c mm/process_vm_access.c mm/rmap.c mm/swapfile.c mm/util.c virt/kvm/async_pf.c # mmput_async(): include/linux/sched/mm.h kernel/fork.c mm/oom_kill.c # get_task_mm(): arch/arc/kernel/troubleshoot.c arch/powerpc/platforms/cell/spufs/context.c drivers/android/binder.c drivers/gpu/drm/etnaviv/etnaviv_gem.c drivers/infiniband/core/umem.c drivers/infiniband/core/umem_odp.c drivers/infiniband/hw/mlx4/main.c drivers/infiniband/hw/mlx5/main.c drivers/infiniband/hw/usnic/usnic_uiom.c drivers/iommu/amd_iommu_v2.c drivers/iommu/intel-svm.c drivers/lguest/lguest_user.c drivers/misc/cxl/fault.c drivers/misc/mic/scif/scif_rma.c drivers/oprofile/buffer_sync.c drivers/vfio/vfio_iommu_type1.c drivers/vhost/vhost.c drivers/xen/gntdev.c fs/proc/array.c fs/proc/base.c fs/proc/task_mmu.c include/linux/sched/mm.h kernel/cpuset.c kernel/events/core.c kernel/exit.c kernel/fork.c kernel/ptrace.c kernel/sys.c kernel/trace/trace_output.c kernel/tsacct.c mm/memcontrol.c mm/memory.c mm/mempolicy.c mm/migrate.c mm/mmu_notifier.c mm/nommu.c mm/util.c # mm_access(): fs/proc/base.c include/linux/sched/mm.h kernel/fork.c mm/process_vm_access.c # mm_release(): arch/arc/include/asm/mmu_context.h fs/exec.c include/linux/sched/mm.h include/uapi/linux/sched.h kernel/exit.c kernel/fork.c Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Ingo Molnar
|
68db0cf106 |
sched/headers: Prepare for new header dependencies before moving code to <linux/sched/task_stack.h>
We are going to split <linux/sched/task_stack.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task_stack.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Ingo Molnar
|
ef8bd77f33 |
sched/headers: Prepare for new header dependencies before moving code to <linux/sched/hotplug.h>
We are going to split <linux/sched/hotplug.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/hotplug.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Linus Torvalds
|
d4f4cf77b3 |
Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King: - nommu updates from Afzal Mohammed cleaning up the vectors support - allow DMA memory "mapping" for nommu Benjamin Gaignard - fixing a correctness issue with R_ARM_PREL31 relocations in the module linker - add strlen() prototype for the decompressor - support for DEBUG_VIRTUAL from Florian Fainelli - adjusting memory bounds after memory reservations have been registered - unipher cache handling updates from Masahiro Yamada - initrd and Thumb Kconfig cleanups * 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (23 commits) ARM: mm: round the initrd reservation to page boundaries ARM: mm: clean up initrd initialisation ARM: mm: move initrd init code out of arm_memblock_init() ARM: 8655/1: improve NOMMU definition of pgprot_*() ARM: 8654/1: decompressor: add strlen prototype ARM: 8652/1: cache-uniphier: clean up active way setup code ARM: 8651/1: cache-uniphier: include <linux/errno.h> instead of <linux/types.h> ARM: 8650/1: module: handle negative R_ARM_PREL31 addends correctly ARM: 8649/2: nommu: remove Hivecs configuration is asm ARM: 8648/2: nommu: display vectors base ARM: 8647/2: nommu: dynamic exception base address setting ARM: 8646/1: mmu: decouple VECTORS_BASE from Kconfig ARM: 8644/1: Reduce "CPU: shutdown" message to debug level ARM: 8641/1: treewide: Replace uses of virt_to_phys with __pa_symbol ARM: 8640/1: Add support for CONFIG_DEBUG_VIRTUAL ARM: 8639/1: Define KERNEL_START and KERNEL_END ARM: 8638/1: mtd: lart: Rename partition defines to be prefixed with PART_ ARM: 8637/1: Adjust memory boundaries after reservations ARM: 8636/1: Cleanup sanity_check_meminfo ARM: add CPU_THUMB_CAPABLE to indicate possible Thumb support ... |
||
|
Florian Fainelli
|
035e787543 |
ARM: 8644/1: Reduce "CPU: shutdown" message to debug level
Similar to
|
||
|
Vegard Nossum
|
f1f1007644 |
mm: add new mmgrab() helper
Apart from adding the helper function itself, the rest of the kernel is converted mechanically using: git grep -l 'atomic_inc.*mm_count' | xargs sed -i 's/atomic_inc(&\(.*\)->mm_count);/mmgrab\(\1\);/' git grep -l 'atomic_inc.*mm_count' | xargs sed -i 's/atomic_inc(&\(.*\)\.mm_count);/mmgrab\(\&\1\);/' This is needed for a later patch that hooks into the helper, but might be a worthwhile cleanup on its own. (Michal Hocko provided most of the kerneldoc comment.) Link: http://lkml.kernel.org/r/20161218123229.22952-1-vegard.nossum@oracle.com Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Chris Metcalf
|
6776648952 |
nmi_backtrace: do a local dump_stack() instead of a self-NMI
Currently on arm there is code that checks whether it should call dump_stack() explicitly, to avoid trying to raise an NMI when the current context is not preemptible by the backtrace IPI. Similarly, the forthcoming arch/tile support uses an IPI mechanism that does not support generating an NMI to self. Accordingly, move the code that guards this case into the generic mechanism, and invoke it unconditionally whenever we want a backtrace of the current cpu. It seems plausible that in all cases, dump_stack() will generate better information than generating a stack from the NMI handler. The register state will be missing, but that state is likely not particularly helpful in any case. Or, if we think it is helpful, we should be capturing and emitting the current register state in all cases when regs == NULL is passed to nmi_cpu_backtrace(). Link: http://lkml.kernel.org/r/1472487169-14923-3-git-send-email-cmetcalf@mellanox.com Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com> Tested-by: Daniel Thompson <daniel.thompson@linaro.org> [arm] Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Aaron Tomlin <atomlin@redhat.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Chris Metcalf
|
9a01c3ed5c |
nmi_backtrace: add more trigger_*_cpu_backtrace() methods
Patch series "improvements to the nmi_backtrace code" v9. This patch series modifies the trigger_xxx_backtrace() NMI-based remote backtracing code to make it more flexible, and makes a few small improvements along the way. The motivation comes from the task isolation code, where there are scenarios where we want to be able to diagnose a case where some cpu is about to interrupt a task-isolated cpu. It can be helpful to see both where the interrupting cpu is, and also an approximation of where the cpu that is being interrupted is. The nmi_backtrace framework allows us to discover the stack of the interrupted cpu. I've tested that the change works as desired on tile, and build-tested x86, arm, mips, and sparc64. For x86 I confirmed that the generic cpuidle stuff as well as the architecture-specific routines are in the new cpuidle section. For arm, mips, and sparc I just build-tested it and made sure the generic cpuidle routines were in the new cpuidle section, but I didn't attempt to figure out which the platform-specific idle routines might be. That might be more usefully done by someone with platform experience in follow-up patches. This patch (of 4): Currently you can only request a backtrace of either all cpus, or all cpus but yourself. It can also be helpful to request a remote backtrace of a single cpu, and since we want that, the logical extension is to support a cpumask as the underlying primitive. This change modifies the existing lib/nmi_backtrace.c code to take a cpumask as its basic primitive, and modifies the linux/nmi.h code to use the new "cpumask" method instead. The existing clients of nmi_backtrace (arm and x86) are converted to using the new cpumask approach in this change. The other users of the backtracing API (sparc64 and mips) are converted to use the cpumask approach rather than the all/allbutself approach. The mips code ignored the "include_self" boolean but with this change it will now also dump a local backtrace if requested. Link: http://lkml.kernel.org/r/1472487169-14923-2-git-send-email-cmetcalf@mellanox.com Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com> Tested-by: Daniel Thompson <daniel.thompson@linaro.org> [arm] Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Kees Cook
|
7619751f8c |
ARM: 8595/2: apply more __ro_after_init
Guided by grsecurity's analogous __read_only markings in arch/arm, this applies several uses of __ro_after_init to structures that are only updated during __init. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> |
||
|
Olof Johansson
|
9503427e91 |
Merge tag 'fixes-rcu-fiq-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Fixes for omaps for v4.7-rc cycle: - Two boot warning fixes from the RCU tree that should have gotten merged several weeks ago already but did not because of issues with who merges them. Paul has now split the RCU warning fixes into sets for various maintainers. - Fix ams-delta FIQ regression caused by omap1 sparse IRQ changes - Fix PM for omap3 boards using timer12 and gptimer, like the original beagleboard - Fix hangs on am437x-sk-evm by lowering the I2C bus speed * tag 'fixes-rcu-fiq-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am437x-sk-evm: Reduce i2c0 bus speed for tps65218 ARM: OMAP2+: timer: add probe for clocksources ARM: OMAP1: fix ams-delta FIQ handler to work with sparse IRQ arm: Use _rcuidle for smp_cross_call() tracepoints arm: Use _rcuidle tracepoint to allow use from idle Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Paul E. McKenney
|
7c64cc0531 |
arm: Use _rcuidle for smp_cross_call() tracepoints
Further testing with false negatives suppressed by commit
|
||
|
Petr Mladek
|
42a0bb3f71 |
printk/nmi: generic solution for safe printk in NMI
printk() takes some locks and could not be used a safe way in NMI
context.
The chance of a deadlock is real especially when printing stacks from
all CPUs. This particular problem has been addressed on x86 by the
commit
|
||
|
Thomas Gleixner
|
fc6d73d674 |
arch/hotplug: Call into idle with a proper state
Let the non boot cpus call into idle with the corresponding hotplug state, so the hotplug core can handle the further bringup. That's a first step to convert the boot side of the hotplugged cpus to do all the synchronization with the other side through the state machine. For now it'll only start the hotplug thread and kick the full bringup of the cpu. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.614102639@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |