hwmon: tmp513: Add max_channels variable to struct tmp51x_data

The tmp512 chip has 3 channels whereas tmp513 has 4 channels. Avoid
using tmp51x_ids for this HW difference by replacing OF/ID table
data with maximum channels supported by the device.

Replace id->max_channels variable from struct tmp51x_data and drop the
macros TMP51{2,3}_TEMP_CONFIG_DEFAULT as it can be derived from the macro
TMP51X_TEMP_CONFIG_DEFAULT and update the logic in tmp51x_is_visible(),
tmp51x_read_properties() and tmp51x_init() using max_channels.

While at it, drop enum tmp51x_ids as there is no user and remove
trailing comma in the terminator entry for OF table.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230907071404.24334-2-biju.das.jz@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

drivers/hwmon/tmp513.c

@@ -73,9 +73,6 @@
 #define TMP51X_PGA_DEFAULT		8
 #define TMP51X_MAX_REGISTER_ADDR	0xFF
 
-#define TMP512_TEMP_CONFIG_DEFAULT	0xBF80
-#define TMP513_TEMP_CONFIG_DEFAULT	0xFF80
-
 // Mask and shift
 #define CURRENT_SENSE_VOLTAGE_320_MASK	0x1800
 #define CURRENT_SENSE_VOLTAGE_160_MASK	0x1000
@@ -113,6 +110,17 @@
 
 #define MAX_TEMP_HYST			127500
 
+#define TMP512_MAX_CHANNELS		3
+#define TMP513_MAX_CHANNELS		4
+
+#define TMP51X_TEMP_CONFIG_CONV_RATE	GENMASK(9, 7)
+#define TMP51X_TEMP_CONFIG_RC		BIT(10)
+#define TMP51X_TEMP_CHANNEL_MASK(n)	(GENMASK((n) - 1, 0) << 11)
+#define TMP51X_TEMP_CONFIG_CONT		BIT(15)
+#define TMP51X_TEMP_CONFIG_DEFAULT(n)					\
+	(TMP51X_TEMP_CHANNEL_MASK(n) | TMP51X_TEMP_CONFIG_CONT |	\
+	 TMP51X_TEMP_CONFIG_CONV_RATE | TMP51X_TEMP_CONFIG_RC)
+
 static const u8 TMP51X_TEMP_INPUT[4] = {
 	TMP51X_LOCAL_TEMP_RESULT,
 	TMP51X_REMOTE_TEMP_RESULT_1,
@@ -152,10 +160,6 @@ static struct regmap_config tmp51x_regmap_config = {
 	.max_register = TMP51X_MAX_REGISTER_ADDR,
 };
 
-enum tmp51x_ids {
-	tmp512, tmp513
-};
-
 struct tmp51x_data {
 	u16 shunt_config;
 	u16 pga_gain;
@@ -169,7 +173,7 @@ struct tmp51x_data {
 	u32 curr_lsb_ua;
 	u32 pwr_lsb_uw;
 
-	enum tmp51x_ids id;
+	u8 max_channels;
 	struct regmap *regmap;
 };
 
@@ -434,7 +438,7 @@ static umode_t tmp51x_is_visible(const void *_data,
 
 	switch (type) {
 	case hwmon_temp:
-		if (data->id == tmp512 && channel == 3)
+		if (channel >= data->max_channels)
 			return 0;
 		switch (attr) {
 		case hwmon_temp_input:
@@ -585,7 +589,7 @@ static int tmp51x_init(struct tmp51x_data *data)
 	if (ret < 0)
 		return ret;
 
-	if (data->id == tmp513) {
+	if (data->max_channels == TMP513_MAX_CHANNELS) {
 		ret = regmap_write(data->regmap, TMP513_N_FACTOR_3,
 				   data->nfactor[2] << 8);
 		if (ret < 0)
@@ -601,22 +605,16 @@ static int tmp51x_init(struct tmp51x_data *data)
 }
 
 static const struct i2c_device_id tmp51x_id[] = {
-	{ "tmp512", tmp512 },
+	{ "tmp512", TMP512_MAX_CHANNELS },
-	{ "tmp513", tmp513 },
+	{ "tmp513", TMP513_MAX_CHANNELS },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, tmp51x_id);
 
 static const struct of_device_id tmp51x_of_match[] = {
-	{
+	{ .compatible = "ti,tmp512", .data = (void *)TMP512_MAX_CHANNELS },
-		.compatible = "ti,tmp512",
+	{ .compatible = "ti,tmp513", .data = (void *)TMP513_MAX_CHANNELS },
-		.data = (void *)tmp512
+	{ }
-	},
-	{
-		.compatible = "ti,tmp513",
-		.data = (void *)tmp513
-	},
-	{ },
 };
 MODULE_DEVICE_TABLE(of, tmp51x_of_match);
 
@@ -674,9 +672,9 @@ static int tmp51x_read_properties(struct device *dev, struct tmp51x_data *data)
 		return ret;
 
 	ret = device_property_read_u32_array(dev, "ti,nfactor", nfactor,
-					    (data->id == tmp513) ? 3 : 2);
+					    data->max_channels - 1);
 	if (ret >= 0)
-		memcpy(data->nfactor, nfactor, (data->id == tmp513) ? 3 : 2);
+		memcpy(data->nfactor, nfactor, data->max_channels - 1);
 
 	// Check if shunt value is compatible with pga-gain
 	if (data->shunt_uohms > data->pga_gain * 40 * 1000 * 1000) {
@@ -698,8 +696,7 @@ static void tmp51x_use_default(struct tmp51x_data *data)
 static int tmp51x_configure(struct device *dev, struct tmp51x_data *data)
 {
 	data->shunt_config = TMP51X_SHUNT_CONFIG_DEFAULT;
-	data->temp_config = (data->id == tmp513) ?
+	data->temp_config = TMP51X_TEMP_CONFIG_DEFAULT(data->max_channels);
-			TMP513_TEMP_CONFIG_DEFAULT : TMP512_TEMP_CONFIG_DEFAULT;
 
 	if (dev->of_node)
 		return tmp51x_read_properties(dev, data);
@@ -720,7 +717,7 @@ static int tmp51x_probe(struct i2c_client *client)
 	if (!data)
 		return -ENOMEM;
 
-	data->id = (uintptr_t)i2c_get_match_data(client);
+	data->max_channels = (uintptr_t)i2c_get_match_data(client);
 
 	ret = tmp51x_configure(dev, data);
 	if (ret < 0) {