diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip-slave.yaml b/Documentation/devicetree/bindings/spi/spi-rockchip-slave.yaml new file mode 100644 index 000000000000..c5fc1ab887b7 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-rockchip-slave.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clauseyy +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/spi-rockchip-slave.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip SPI Slave Controller + +description: + The Rockchip SPI Slave controller is used to interface with SPI Master Controller. + +allOf: + - $ref: "spi-controller.yaml#" + +maintainers: + - Heiko Stuebner + +# Everything else is described in the common file +properties: + compatible: + oneOf: + - const: rockchip,spi-slave + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: transfer-clock + - description: peripheral clock + + clock-names: + items: + - const: spiclk + - const: apb_pclk + - const: sclk_in + + dmas: + items: + - description: TX DMA Channel + - description: RX DMA Channel + + dma-names: + items: + - const: tx + - const: rx + + rockchip,cs-inactive-disable: + description: Add this property to disable the cs inactive interrupt for spi + slave. + type: boolean + + ready-gpios: + description: GPIO spec for the spi slave ready signal. + maxItems: 1 + + rockchip,autosuspend-delay-ms: + default: 0 + description: Set pm runtime autosuspend value in milliseconds. + + rockchip,sram: + description: Specify sram buffer as SPI Slave DMA buffer. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + spi0: spi@ff110000 { + compatible = "rockchip,spi-slave"; + reg = <0xff110000 0x1000>; + interrupts = ; + clocks = <&cru CLK_SPI0>, <&cru PCLK_SPI0>, <&cru SCLK_IN_SPI0>; + clock-names = "spiclk", "apb_pclk", "sclk_in"; + dmas = <&pdma1 11>, <&pdma1 12>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + ready-gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_LOW>; + };