From 85b6bcf9d5e332aa9c4b7820cb3aa748c3df6a80 Mon Sep 17 00:00:00 2001 From: Parthiban Veerasooran Date: Thu, 23 May 2024 14:23:14 +0530 Subject: [PATCH] net: usb: smsc95xx: fix changing LED_SEL bit value updated from EEPROM [ Upstream commit 52a2f0608366a629d43dacd3191039c95fef74ba ] LED Select (LED_SEL) bit in the LED General Purpose IO Configuration register is used to determine the functionality of external LED pins (Speed Indicator, Link and Activity Indicator, Full Duplex Link Indicator). The default value for this bit is 0 when no EEPROM is present. If a EEPROM is present, the default value is the value of the LED Select bit in the Configuration Flags of the EEPROM. A USB Reset or Lite Reset (LRST) will cause this bit to be restored to the image value last loaded from EEPROM, or to be set to 0 if no EEPROM is present. While configuring the dual purpose GPIO/LED pins to LED outputs in the LED General Purpose IO Configuration register, the LED_SEL bit is changed as 0 and resulting the configured value from the EEPROM is cleared. The issue is fixed by using read-modify-write approach. Fixes: f293501c61c5 ("smsc95xx: configure LED outputs") Signed-off-by: Parthiban Veerasooran Reviewed-by: Simon Horman Reviewed-by: Woojung Huh Link: https://lore.kernel.org/r/20240523085314.167650-1-Parthiban.Veerasooran@microchip.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin --- drivers/net/usb/smsc95xx.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index ec233d033f5c..22c1eac73f2c 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -1036,7 +1036,7 @@ static int smsc95xx_phy_initialize(struct usbnet *dev) static int smsc95xx_reset(struct usbnet *dev) { struct smsc95xx_priv *pdata = dev->driver_priv; - u32 read_buf, write_buf, burst_cap; + u32 read_buf, burst_cap; int ret = 0, timeout; netif_dbg(dev, ifup, dev->net, "entering smsc95xx_reset\n"); @@ -1178,10 +1178,13 @@ static int smsc95xx_reset(struct usbnet *dev) return ret; netif_dbg(dev, ifup, dev->net, "ID_REV = 0x%08x\n", read_buf); + ret = smsc95xx_read_reg(dev, LED_GPIO_CFG, &read_buf); + if (ret < 0) + return ret; /* Configure GPIO pins as LED outputs */ - write_buf = LED_GPIO_CFG_SPD_LED | LED_GPIO_CFG_LNK_LED | - LED_GPIO_CFG_FDX_LED; - ret = smsc95xx_write_reg(dev, LED_GPIO_CFG, write_buf); + read_buf |= LED_GPIO_CFG_SPD_LED | LED_GPIO_CFG_LNK_LED | + LED_GPIO_CFG_FDX_LED; + ret = smsc95xx_write_reg(dev, LED_GPIO_CFG, read_buf); if (ret < 0) return ret;