Merge branch 'devel-stable' into devel

Conflicts:
	arch/arm/mach-pxa/clock.c
	arch/arm/mach-pxa/clock.h

arch/arm/mach-mx3/Kconfig

@@ -1,21 +1,35 @@
 if ARCH_MX3
 
+# ARCH_MX31 and ARCH_MX35 are left for compatibility
+# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
+# To easily distinguish good and reviewed from unreviewed usages new (and IMHO
+# more sensible) names are used: SOC_IMX31 and SOC_IMX35
 config ARCH_MX31
-	select ARCH_HAS_RNGA
-	select ARCH_MXC_AUDMUX_V2
 	bool
 
 config ARCH_MX35
 	bool
+
+config SOC_IMX31
+	bool
+	select IMX_HAVE_PLATFORM_MXC_RNGA
+	select ARCH_MXC_AUDMUX_V2
+	select ARCH_MX31
+	select MXC_AVIC
+
+config SOC_IMX35
+	bool
 	select ARCH_MXC_IOMUX_V3
 	select ARCH_MXC_AUDMUX_V2
 	select HAVE_EPIT
+	select ARCH_MX35
+	select MXC_AVIC
 
 comment "MX3 platforms:"
 
 config MACH_MX31ADS
 	bool "Support MX31ADS platforms"
-	select ARCH_MX31
+	select SOC_IMX31
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_IMX_UART
@@ -37,10 +51,15 @@ config MACH_MX31ADS_WM1133_EV1
 
 config MACH_PCM037
 	bool "Support Phytec pcm037 (i.MX31) platforms"
-	select ARCH_MX31
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_MXC_W1
 	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Phytec pcm037 platform. This includes
@@ -57,9 +76,12 @@ config MACH_PCM037_EET
 
 config MACH_MX31LITE
 	bool "Support MX31 LITEKIT (LogicPD)"
-	select ARCH_MX31
+	select SOC_IMX31
 	select MXC_ULPI if USB_ULPI
+	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	help
@@ -68,11 +90,16 @@ config MACH_MX31LITE
 
 config MACH_MX31_3DS
 	bool "Support MX31PDK (3DS)"
-	select ARCH_MX31
+	select SOC_IMX31
 	select MXC_DEBUG_BOARD
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_KEYPAD
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for MX31PDK (3DS) platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -88,9 +115,12 @@ config MACH_MX31_3DS_MXC_NAND_USE_BBT
 
 config MACH_MX31MOBOARD
 	bool "Support mx31moboard platforms (EPFL Mobots group)"
-	select ARCH_MX31
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_ULPI if USB_ULPI
 	help
@@ -99,8 +129,10 @@ config MACH_MX31MOBOARD
 
 config MACH_MX31LILLY
 	bool "Support MX31 LILLY-1131 platforms (INCO startec)"
-	select ARCH_MX31
+	select SOC_IMX31
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_ULPI if USB_ULPI
 	help
@@ -109,7 +141,7 @@ config MACH_MX31LILLY
 
 config MACH_QONG
 	bool "Support Dave/DENX QongEVB-LITE platform"
-	select ARCH_MX31
+	select SOC_IMX31
 	select IMX_HAVE_PLATFORM_IMX_UART
 	help
 	  Include support for Dave/DENX QongEVB-LITE platform. This includes
@@ -117,13 +149,16 @@ config MACH_QONG
 
 config MACH_PCM043
 	bool "Support Phytec pcm043 (i.MX35) platforms"
-	select ARCH_MX35
+	select SOC_IMX35
+	select IMX_HAVE_PLATFORM_FLEXCAN
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_FLEXCAN
-	select IMX_HAVE_PLATFORM_ESDHC
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Phytec pcm043 platform. This includes
@@ -131,9 +166,11 @@ config MACH_PCM043
 
 config MACH_ARMADILLO5X0
 	bool "Support Atmark Armadillo-500 Development Base Board"
-	select ARCH_MX31
+	select SOC_IMX31
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select MXC_ULPI if USB_ULPI
 	help
@@ -142,19 +179,21 @@ config MACH_ARMADILLO5X0
 
 config MACH_MX35_3DS
 	bool "Support MX35PDK platform"
-	select ARCH_MX35
+	select SOC_IMX35
 	select MXC_DEBUG_BOARD
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_ESDHC
-	default n
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	help
 	  Include support for MX35PDK platform. This includes specific
 	  configurations for the board and its peripherals.
 
 config MACH_KZM_ARM11_01
 	bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
-	select ARCH_MX31
+	select SOC_IMX31
 	select IMX_HAVE_PLATFORM_IMX_UART
 	help
 	  Include support for KZM-ARM11-01. This includes specific
@@ -162,12 +201,15 @@ config MACH_KZM_ARM11_01
 
 config MACH_EUKREA_CPUIMX35
 	bool "Support Eukrea CPUIMX35 Platform"
-	select ARCH_MX35
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_MXC_NAND
+	select SOC_IMX35
 	select IMX_HAVE_PLATFORM_FLEXCAN
-	select IMX_HAVE_PLATFORM_ESDHC
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Eukrea CPUIMX35 platform. This includes

arch/arm/mach-mx3/Makefile

@@ -5,17 +5,14 @@
 # Object file lists.
 
 obj-y				:= mm.o devices.o cpu.o
-CFLAGS_mm.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
-CFLAGS_devices.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
-obj-$(CONFIG_ARCH_MX31)		+= clock-imx31.o iomux-imx31.o
-obj-$(CONFIG_ARCH_MX35)		+= clock-imx35.o
+obj-$(CONFIG_SOC_IMX31)		+= clock-imx31.o iomux-imx31.o
+obj-$(CONFIG_SOC_IMX35)		+= clock-imx35.o
 obj-$(CONFIG_MACH_MX31ADS)	+= mach-mx31ads.o
 obj-$(CONFIG_MACH_MX31LILLY)	+= mach-mx31lilly.o mx31lilly-db.o
 obj-$(CONFIG_MACH_MX31LITE)	+= mach-mx31lite.o mx31lite-db.o
 obj-$(CONFIG_MACH_PCM037)	+= mach-pcm037.o
 obj-$(CONFIG_MACH_PCM037_EET)	+= mach-pcm037_eet.o
 obj-$(CONFIG_MACH_MX31_3DS)	+= mach-mx31_3ds.o
-CFLAGS_mach-mx31_3ds.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
 obj-$(CONFIG_MACH_MX31MOBOARD)	+= mach-mx31moboard.o mx31moboard-devboard.o \
 				   mx31moboard-marxbot.o mx31moboard-smartbot.o
 obj-$(CONFIG_MACH_QONG)		+= mach-qong.o

arch/arm/mach-mx3/clock-imx31.c

@@ -530,7 +530,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("imx31-cspi.2", NULL, cspi3_clk)
 	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
 	_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
-	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
+	_REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
 	_REGISTER_CLOCK(NULL, "epit", epit1_clk)
 	_REGISTER_CLOCK(NULL, "epit", epit2_clk)
@@ -615,7 +615,7 @@ int __init mx31_clocks_init(unsigned long fref)
 
 	mx31_read_cpu_rev();
 
-	if (mx31_revision() >= MX31_CHIP_REV_2_0) {
+	if (mx31_revision() >= IMX_CHIP_REVISION_2_0) {
 		reg = __raw_readl(MXC_CCM_PMCR1);
 		/* No PLL restart on DVFS switch; enable auto EMI handshake */
 		reg |= MXC_CCM_PMCR1_PLLRDIS | MXC_CCM_PMCR1_EMIRQ_EN;

arch/arm/mach-mx3/clock-imx35.c

@@ -494,7 +494,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usbahb_clk)
-	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
+	_REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "max", max_clk)
 	_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
 	_REGISTER_CLOCK(NULL, "csi", csi_clk)

arch/arm/mach-mx3/cpu.c

@@ -25,15 +25,15 @@ struct mx3_cpu_type {
 };
 
 static struct mx3_cpu_type mx31_cpu_type[] __initdata = {
-	{ .srev = 0x00, .name = "i.MX31(L)", .v = "1.0",  .rev = MX3x_CHIP_REV_1_0 },
-	{ .srev = 0x10, .name = "i.MX31",    .v = "1.1",  .rev = MX3x_CHIP_REV_1_1 },
-	{ .srev = 0x11, .name = "i.MX31L",   .v = "1.1",  .rev = MX3x_CHIP_REV_1_1 },
-	{ .srev = 0x12, .name = "i.MX31",    .v = "1.15", .rev = MX3x_CHIP_REV_1_1 },
-	{ .srev = 0x13, .name = "i.MX31L",   .v = "1.15", .rev = MX3x_CHIP_REV_1_1 },
-	{ .srev = 0x14, .name = "i.MX31",    .v = "1.2",  .rev = MX3x_CHIP_REV_1_2 },
-	{ .srev = 0x15, .name = "i.MX31L",   .v = "1.2",  .rev = MX3x_CHIP_REV_1_2 },
-	{ .srev = 0x28, .name = "i.MX31",    .v = "2.0",  .rev = MX3x_CHIP_REV_2_0 },
-	{ .srev = 0x29, .name = "i.MX31L",   .v = "2.0",  .rev = MX3x_CHIP_REV_2_0 },
+	{ .srev = 0x00, .name = "i.MX31(L)", .v = "1.0",  .rev = IMX_CHIP_REVISION_1_0	},
+	{ .srev = 0x10, .name = "i.MX31",    .v = "1.1",  .rev = IMX_CHIP_REVISION_1_1	},
+	{ .srev = 0x11, .name = "i.MX31L",   .v = "1.1",  .rev = IMX_CHIP_REVISION_1_1	},
+	{ .srev = 0x12, .name = "i.MX31",    .v = "1.15", .rev = IMX_CHIP_REVISION_1_1	},
+	{ .srev = 0x13, .name = "i.MX31L",   .v = "1.15", .rev = IMX_CHIP_REVISION_1_1	},
+	{ .srev = 0x14, .name = "i.MX31",    .v = "1.2",  .rev = IMX_CHIP_REVISION_1_2	},
+	{ .srev = 0x15, .name = "i.MX31L",   .v = "1.2",  .rev = IMX_CHIP_REVISION_1_2	},
+	{ .srev = 0x28, .name = "i.MX31",    .v = "2.0",  .rev = IMX_CHIP_REVISION_2_0	},
+	{ .srev = 0x29, .name = "i.MX31L",   .v = "2.0",  .rev = IMX_CHIP_REVISION_2_0	},
 };
 
 void __init mx31_read_cpu_rev(void)
@@ -53,6 +53,8 @@ void __init mx31_read_cpu_rev(void)
 			return;
 		}
 
+	mx31_cpu_rev = IMX_CHIP_REVISION_UNKNOWN;
+
 	printk(KERN_WARNING "Unknown CPU identifier. srev = %02x\n", srev);
 }
 
@@ -62,22 +64,25 @@ EXPORT_SYMBOL(mx35_cpu_rev);
 void __init mx35_read_cpu_rev(void)
 {
 	u32 rev;
-	char *srev = "unknown";
+	char *srev;
 
 	rev = __raw_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV));
 	switch (rev) {
 	case 0x00:
-		mx35_cpu_rev = MX3x_CHIP_REV_1_0;
+		mx35_cpu_rev = IMX_CHIP_REVISION_1_0;
 		srev = "1.0";
 		break;
 	case 0x10:
-		mx35_cpu_rev = MX3x_CHIP_REV_2_0;
+		mx35_cpu_rev = IMX_CHIP_REVISION_2_0;
 		srev = "2.0";
 		break;
 	case 0x11:
-		mx35_cpu_rev = MX3x_CHIP_REV_2_1;
+		mx35_cpu_rev = IMX_CHIP_REVISION_2_1;
 		srev = "2.1";
 		break;
+	default:
+		mx35_cpu_rev = IMX_CHIP_REVISION_UNKNOWN;
+		srev = "unknown";
 	}
 
 	printk(KERN_INFO "CPU identified as i.MX35, silicon rev %s\n", srev);

arch/arm/mach-mx3/devices-imx31.h

@@ -9,6 +9,14 @@
 #include <mach/mx31.h>
 #include <mach/devices-common.h>
 
+extern const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst;
+#define imx31_add_fsl_usb2_udc(pdata)	\
+	imx_add_fsl_usb2_udc(&imx31_fsl_usb2_udc_data, pdata)
+
+extern const struct imx_imx2_wdt_data imx31_imx2_wdt_data __initconst;
+#define imx31_add_imx2_wdt(pdata)       \
+	imx_add_imx2_wdt(&imx31_imx2_wdt_data)
+
 extern const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst;
 #define imx31_add_imx_i2c(id, pdata)	\
 	imx_add_imx_i2c(&imx31_imx_i2c_data[id], pdata)
@@ -16,6 +24,10 @@ extern const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst;
 #define imx31_add_imx_i2c1(pdata)	imx31_add_imx_i2c(1, pdata)
 #define imx31_add_imx_i2c2(pdata)	imx31_add_imx_i2c(2, pdata)
 
+extern const struct imx_imx_keypad_data imx31_imx_keypad_data __initconst;
+#define imx31_add_imx_keypad(pdata)	\
+	imx_add_imx_keypad(&imx31_imx_keypad_data, pdata)
+
 extern const struct imx_imx_ssi_data imx31_imx_ssi_data[] __initconst;
 #define imx31_add_imx_ssi(id, pdata)    \
 	imx_add_imx_ssi(&imx31_imx_ssi_data[id], pdata)
@@ -29,10 +41,25 @@ extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst;
 #define imx31_add_imx_uart3(pdata)	imx31_add_imx_uart(3, pdata)
 #define imx31_add_imx_uart4(pdata)	imx31_add_imx_uart(4, pdata)
 
+extern const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data __initconst;
+#define imx31_add_mxc_ehci_otg(pdata)	\
+	imx_add_mxc_ehci(&imx31_mxc_ehci_otg_data, pdata)
+extern const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[] __initconst;
+#define imx31_add_mxc_ehci_hs(id, pdata)	\
+	imx_add_mxc_ehci(&imx31_mxc_ehci_hs_data[id - 1], pdata)
+
+extern const struct imx_mxc_mmc_data imx31_mxc_mmc_data[] __initconst;
+#define imx31_add_mxc_mmc(id, pdata)	\
+	imx_add_mxc_mmc(&imx31_mxc_mmc_data[id], pdata)
+
 extern const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst;
 #define imx31_add_mxc_nand(pdata)	\
 	imx_add_mxc_nand(&imx31_mxc_nand_data, pdata)
 
+extern const struct imx_mxc_w1_data imx31_mxc_w1_data __initconst;
+#define imx31_add_mxc_w1(pdata)	\
+	imx_add_mxc_w1(&imx31_mxc_w1_data)
+
 extern const struct imx_spi_imx_data imx31_cspi_data[] __initconst;
 #define imx31_add_cspi(id, pdata)	\
 	imx_add_spi_imx(&imx31_cspi_data[id], pdata)

arch/arm/mach-mx3/devices-imx35.h

@@ -13,10 +13,19 @@ extern const struct imx_fec_data imx35_fec_data __initconst;
 #define imx35_add_fec(pdata)	\
 	imx_add_fec(&imx35_fec_data, pdata)
 
-#define imx35_add_flexcan0(pdata)	\
-	imx_add_flexcan(0, MX35_CAN1_BASE_ADDR, SZ_16K, MX35_INT_CAN1, pdata)
-#define imx35_add_flexcan1(pdata)	\
-	imx_add_flexcan(1, MX35_CAN2_BASE_ADDR, SZ_16K, MX35_INT_CAN2, pdata)
+extern const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst;
+#define imx35_add_fsl_usb2_udc(pdata)	\
+	imx_add_fsl_usb2_udc(&imx35_fsl_usb2_udc_data, pdata)
+
+extern const struct imx_flexcan_data imx35_flexcan_data[] __initconst;
+#define imx35_add_flexcan(id, pdata)	\
+	imx_add_flexcan(&imx35_flexcan_data[id], pdata)
+#define imx35_add_flexcan0(pdata)	imx35_add_flexcan(0, pdata)
+#define imx35_add_flexcan1(pdata)	imx35_add_flexcan(1, pdata)
+
+extern const struct imx_imx2_wdt_data imx35_imx2_wdt_data __initconst;
+#define imx35_add_imx2_wdt(pdata)       \
+	imx_add_imx2_wdt(&imx35_imx2_wdt_data)
 
 extern const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst;
 #define imx35_add_imx_i2c(id, pdata)	\
@@ -25,6 +34,10 @@ extern const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst;
 #define imx35_add_imx_i2c1(pdata)	imx35_add_imx_i2c(1, pdata)
 #define imx35_add_imx_i2c2(pdata)	imx35_add_imx_i2c(2, pdata)
 
+extern const struct imx_imx_keypad_data imx35_imx_keypad_data __initconst;
+#define imx31_add_imx_keypad(pdata)	\
+	imx_add_imx_keypad(&imx35_imx_keypad_data, pdata)
+
 extern const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst;
 #define imx35_add_imx_ssi(id, pdata)    \
 	imx_add_imx_ssi(&imx35_imx_ssi_data[id], pdata)
@@ -36,16 +49,28 @@ extern const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst;
 #define imx35_add_imx_uart1(pdata)	imx35_add_imx_uart(1, pdata)
 #define imx35_add_imx_uart2(pdata)	imx35_add_imx_uart(2, pdata)
 
+extern const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data __initconst;
+#define imx35_add_mxc_ehci_otg(pdata)	\
+	imx_add_mxc_ehci(&imx35_mxc_ehci_otg_data, pdata)
+extern const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data __initconst;
+#define imx35_add_mxc_ehci_hs(pdata)	\
+	imx_add_mxc_ehci(&imx35_mxc_ehci_hs_data, pdata)
+
 extern const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst;
 #define imx35_add_mxc_nand(pdata)	\
 	imx_add_mxc_nand(&imx35_mxc_nand_data, pdata)
 
+extern const struct imx_mxc_w1_data imx35_mxc_w1_data __initconst;
+#define imx35_add_mxc_w1(pdata)	\
+	imx_add_mxc_w1(&imx35_mxc_w1_data)
+
+extern const struct imx_sdhci_esdhc_imx_data
+imx35_sdhci_esdhc_imx_data[] __initconst;
+#define imx35_add_sdhci_esdhc_imx(id, pdata)	\
+	imx_add_sdhci_esdhc_imx(&imx35_sdhci_esdhc_imx_data[id], pdata)
+
 extern const struct imx_spi_imx_data imx35_cspi_data[] __initconst;
 #define imx35_add_cspi(id, pdata)	\
 	imx_add_spi_imx(&imx35_cspi_data[id], pdata)
 #define imx35_add_spi_imx0(pdata)	imx35_add_cspi(0, pdata)
 #define imx35_add_spi_imx1(pdata)	imx35_add_cspi(1, pdata)
-
-extern const struct imx_esdhc_imx_data imx35_esdhc_data[] __initconst;
-#define imx35_add_esdhc(id, pdata)	\
-	imx_add_esdhc(&imx35_esdhc_data[id], pdata)

arch/arm/mach-mx3/devices.c

@@ -29,120 +29,25 @@
 
 #include "devices.h"
 
-/* GPIO port description */
-static struct mxc_gpio_port imx_gpio_ports[] = {
-	{
-		.chip.label = "gpio-0",
-		.base = IO_ADDRESS(GPIO1_BASE_ADDR),
-		.irq = MXC_INT_GPIO1,
-		.virtual_irq_start = MXC_GPIO_IRQ_START,
-	}, {
-		.chip.label = "gpio-1",
-		.base = IO_ADDRESS(GPIO2_BASE_ADDR),
-		.irq = MXC_INT_GPIO2,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
-	}, {
-		.chip.label = "gpio-2",
-		.base = IO_ADDRESS(GPIO3_BASE_ADDR),
-		.irq = MXC_INT_GPIO3,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
-	}
-};
-
-int __init imx3x_register_gpios(void)
-{
-	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
-}
-
-static struct resource mxc_w1_master_resources[] = {
-	{
-		.start = OWIRE_BASE_ADDR,
-		.end   = OWIRE_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device mxc_w1_master_device = {
-	.name = "mxc_w1",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_w1_master_resources),
-	.resource = mxc_w1_master_resources,
-};
-
-#ifdef CONFIG_ARCH_MX31
-static struct resource mxcsdhc0_resources[] = {
-	{
-		.start = MX31_MMC_SDHC1_BASE_ADDR,
-		.end = MX31_MMC_SDHC1_BASE_ADDR + SZ_16K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX31_INT_MMC_SDHC1,
-		.end = MX31_INT_MMC_SDHC1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource mxcsdhc1_resources[] = {
-	{
-		.start = MX31_MMC_SDHC2_BASE_ADDR,
-		.end = MX31_MMC_SDHC2_BASE_ADDR + SZ_16K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX31_INT_MMC_SDHC2,
-		.end = MX31_INT_MMC_SDHC2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxcsdhc_device0 = {
-	.name = "mxc-mmc",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxcsdhc0_resources),
-	.resource = mxcsdhc0_resources,
-};
-
-struct platform_device mxcsdhc_device1 = {
-	.name = "mxc-mmc",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(mxcsdhc1_resources),
-	.resource = mxcsdhc1_resources,
-};
-
-static struct resource rnga_resources[] = {
-	{
-		.start = RNGA_BASE_ADDR,
-		.end = RNGA_BASE_ADDR + 0x28,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device mxc_rnga_device = {
-	.name = "mxc_rnga",
-	.id = -1,
-	.num_resources = 1,
-	.resource = rnga_resources,
-};
-#endif /* CONFIG_ARCH_MX31 */
-
 /* i.MX31 Image Processing Unit */
 
 /* The resource order is important! */
 static struct resource mx3_ipu_rsrc[] = {
 	{
-		.start = IPU_CTRL_BASE_ADDR,
-		.end = IPU_CTRL_BASE_ADDR + 0x5F,
+		.start = MX3x_IPU_CTRL_BASE_ADDR,
+		.end = MX3x_IPU_CTRL_BASE_ADDR + 0x5F,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = IPU_CTRL_BASE_ADDR + 0x88,
-		.end = IPU_CTRL_BASE_ADDR + 0xB3,
+		.start = MX3x_IPU_CTRL_BASE_ADDR + 0x88,
+		.end = MX3x_IPU_CTRL_BASE_ADDR + 0xB3,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_IPU_SYN,
-		.end = MXC_INT_IPU_SYN,
+		.start = MX3x_INT_IPU_SYN,
+		.end = MX3x_INT_IPU_SYN,
 		.flags = IORESOURCE_IRQ,
 	}, {
-		.start = MXC_INT_IPU_ERR,
-		.end = MXC_INT_IPU_ERR,
+		.start = MX3x_INT_IPU_ERR,
+		.end = MX3x_INT_IPU_ERR,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -156,8 +61,8 @@ struct platform_device mx3_ipu = {
 
 static struct resource fb_resources[] = {
 	{
-		.start	= IPU_CTRL_BASE_ADDR + 0xB4,
-		.end	= IPU_CTRL_BASE_ADDR + 0x1BF,
+		.start	= MX3x_IPU_CTRL_BASE_ADDR + 0xB4,
+		.end	= MX3x_IPU_CTRL_BASE_ADDR + 0x1BF,
 		.flags	= IORESOURCE_MEM,
 	},
 };
@@ -174,8 +79,8 @@ struct platform_device mx3_fb = {
 
 static struct resource camera_resources[] = {
 	{
-		.start	= IPU_CTRL_BASE_ADDR + 0x60,
-		.end	= IPU_CTRL_BASE_ADDR + 0x87,
+		.start	= MX3x_IPU_CTRL_BASE_ADDR + 0x60,
+		.end	= MX3x_IPU_CTRL_BASE_ADDR + 0x87,
 		.flags	= IORESOURCE_MEM,
 	},
 };
@@ -190,110 +95,6 @@ struct platform_device mx3_camera = {
 	},
 };
 
-static struct resource otg_resources[] = {
-	{
-		.start	= MX31_OTG_BASE_ADDR,
-		.end	= MX31_OTG_BASE_ADDR + 0x1ff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= MXC_INT_USB3,
-		.end	= MXC_INT_USB3,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 otg_dmamask = DMA_BIT_MASK(32);
-
-/* OTG gadget device */
-struct platform_device mxc_otg_udc_device = {
-	.name		= "fsl-usb2-udc",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= &otg_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= otg_resources,
-	.num_resources	= ARRAY_SIZE(otg_resources),
-};
-
-/* OTG host */
-struct platform_device mxc_otg_host = {
-	.name = "mxc-ehci",
-	.id = 0,
-	.dev = {
-		.coherent_dma_mask = 0xffffffff,
-		.dma_mask = &otg_dmamask,
-	},
-	.resource = otg_resources,
-	.num_resources = ARRAY_SIZE(otg_resources),
-};
-
-/* USB host 1 */
-
-static u64 usbh1_dmamask = ~(u32)0;
-
-static struct resource mxc_usbh1_resources[] = {
-	{
-		.start = MX31_OTG_BASE_ADDR + 0x200,
-		.end = MX31_OTG_BASE_ADDR + 0x3ff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_USB1,
-		.end = MXC_INT_USB1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_usbh1 = {
-	.name = "mxc-ehci",
-	.id = 1,
-	.dev = {
-		.coherent_dma_mask = 0xffffffff,
-		.dma_mask = &usbh1_dmamask,
-	},
-	.resource = mxc_usbh1_resources,
-	.num_resources = ARRAY_SIZE(mxc_usbh1_resources),
-};
-
-/* USB host 2 */
-static u64 usbh2_dmamask = ~(u32)0;
-
-static struct resource mxc_usbh2_resources[] = {
-	{
-		.start = MX31_OTG_BASE_ADDR + 0x400,
-		.end = MX31_OTG_BASE_ADDR + 0x5ff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_USB2,
-		.end = MXC_INT_USB2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_usbh2 = {
-	.name = "mxc-ehci",
-	.id = 2,
-	.dev = {
-		.coherent_dma_mask = 0xffffffff,
-		.dma_mask = &usbh2_dmamask,
-	},
-	.resource = mxc_usbh2_resources,
-	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
-};
-
-static struct resource imx_wdt_resources[] = {
-	{
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device imx_wdt_device0 = {
-	.name           = "imx2-wdt",
-	.id             = 0,
-	.num_resources  = ARRAY_SIZE(imx_wdt_resources),
-	.resource       = imx_wdt_resources,
-};
-
 static struct resource imx_rtc_resources[] = {
 	{
 		.start  = MX31_RTC_BASE_ADDR,
@@ -312,51 +113,3 @@ struct platform_device imx_rtc_device0 = {
 	.num_resources  = ARRAY_SIZE(imx_rtc_resources),
 	.resource       = imx_rtc_resources,
 };
-
-static struct resource imx_kpp_resources[] = {
-	{
-		.start	= MX3x_KPP_BASE_ADDR,
-		.end	= MX3x_KPP_BASE_ADDR + 0xf,
-		.flags	= IORESOURCE_MEM
-	}, {
-		.start	= MX3x_INT_KPP,
-		.end	= MX3x_INT_KPP,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_kpp_device = {
-	.name = "imx-keypad",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(imx_kpp_resources),
-	.resource = imx_kpp_resources,
-};
-
-static int __init mx3_devices_init(void)
-{
-#if defined(CONFIG_ARCH_MX31)
-	if (cpu_is_mx31()) {
-		imx_wdt_resources[0].start = MX31_WDOG_BASE_ADDR;
-		imx_wdt_resources[0].end = MX31_WDOG_BASE_ADDR + 0x3fff;
-		mxc_register_device(&mxc_rnga_device, NULL);
-	}
-#endif
-#if defined(CONFIG_ARCH_MX35)
-	if (cpu_is_mx35()) {
-		otg_resources[0].start = MX35_OTG_BASE_ADDR;
-		otg_resources[0].end = MX35_OTG_BASE_ADDR + 0x1ff;
-		otg_resources[1].start = MXC_INT_USBOTG;
-		otg_resources[1].end = MXC_INT_USBOTG;
-		mxc_usbh1_resources[0].start = MX35_OTG_BASE_ADDR + 0x400;
-		mxc_usbh1_resources[0].end = MX35_OTG_BASE_ADDR + 0x5ff;
-		mxc_usbh1_resources[1].start = MXC_INT_USBHS;
-		mxc_usbh1_resources[1].end = MXC_INT_USBHS;
-		imx_wdt_resources[0].start = MX35_WDOG_BASE_ADDR;
-		imx_wdt_resources[0].end = MX35_WDOG_BASE_ADDR + 0x3fff;
-	}
-#endif
-
-	return 0;
-}
-
-subsys_initcall(mx3_devices_init);

arch/arm/mach-mx3/devices.h

@@ -1,14 +1,4 @@
-extern struct platform_device mxc_w1_master_device;
 extern struct platform_device mx3_ipu;
 extern struct platform_device mx3_fb;
 extern struct platform_device mx3_camera;
-extern struct platform_device mxcsdhc_device0;
-extern struct platform_device mxcsdhc_device1;
-extern struct platform_device mxc_otg_udc_device;
-extern struct platform_device mxc_otg_host;
-extern struct platform_device mxc_usbh1;
-extern struct platform_device mxc_usbh2;
-extern struct platform_device mxc_rnga_device;
-extern struct platform_device imx_wdt_device0;
 extern struct platform_device imx_rtc_device0;
-extern struct platform_device imx_kpp_device;

arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c

@@ -111,7 +111,7 @@ static struct mx3fb_platform_data mx3fb_pdata = {
 	.num_modes	= ARRAY_SIZE(fb_modedb),
 };
 
-static struct pad_desc eukrea_mbimxsd_pads[] = {
+static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
 	/* LCD */
 	MX35_PAD_LD0__IPU_DISPB_DAT_0,
 	MX35_PAD_LD1__IPU_DISPB_DAT_1,
@@ -289,7 +289,7 @@ void __init eukrea_mbimxsd35_baseboard_init(void)
 	imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
 
 	imx35_add_flexcan1(NULL);
-	imx35_add_esdhc(0, NULL);
+	imx35_add_sdhci_esdhc_imx(0, NULL);
 
 	gpio_request(GPIO_LED1, "LED1");
 	gpio_direction_output(GPIO_LED1, 1);

arch/arm/mach-mx3/mach-armadillo5x0.c

@@ -49,10 +49,8 @@
 
 #include <mach/common.h>
 #include <mach/iomux-mx3.h>
-#include <mach/mmc.h>
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
-#include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
 #include "devices-imx31.h"
@@ -245,13 +243,13 @@ h2_free_cs:
 	return err;
 }
 
-static struct mxc_usbh_platform_data usbotg_pdata = {
+static struct mxc_usbh_platform_data usbotg_pdata __initdata = {
 	.init	= usbotg_init,
 	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
 	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
-static struct mxc_usbh_platform_data usbh2_pdata = {
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
 	.init	= usbh2_init,
 	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
 	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
@@ -453,7 +451,7 @@ static void armadillo5x0_sdhc1_exit(struct device *dev, void *data)
 	gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
 }
 
-static struct imxmmc_platform_data sdhc_pdata = {
+static const struct imxmmc_platform_data sdhc_pdata __initconst = {
 	.get_ro = armadillo5x0_sdhc1_get_ro,
 	.init = armadillo5x0_sdhc1_init,
 	.exit = armadillo5x0_sdhc1_exit,
@@ -520,7 +518,7 @@ static void __init armadillo5x0_init(void)
 	gpio_direction_input(MX31_PIN_GPIO1_0);
 
 	/* Register SDHC */
-	mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
+	imx31_add_mxc_mmc(0, &sdhc_pdata);
 
 	/* Register FB */
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
@@ -555,8 +553,8 @@ static void __init armadillo5x0_init(void)
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 			ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
-	mxc_register_device(&mxc_otg_host, &usbotg_pdata);
-	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+	imx31_add_mxc_ehci_otg(&usbotg_pdata);
+	imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
 #endif
 }
 

arch/arm/mach-mx3/mach-cpuimx35.c

@@ -30,7 +30,6 @@
 #include <linux/i2c/tsc2007.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
-#include <linux/fsl_devices.h>
 #include <linux/i2c-gpio.h>
 
 #include <asm/mach-types.h>
@@ -43,7 +42,6 @@
 #include <mach/common.h>
 #include <mach/iomux-mx35.h>
 #include <mach/mxc_nand.h>
-#include <mach/mxc_ehci.h>
 
 #include "devices-imx35.h"
 #include "devices.h"
@@ -74,11 +72,7 @@ static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
 	},
 };
 
-static struct platform_device *devices[] __initdata = {
-	&imx_wdt_device0,
-};
-
-static struct pad_desc eukrea_cpuimx35_pads[] = {
+static iomux_v3_cfg_t eukrea_cpuimx35_pads[] = {
 	/* UART1 */
 	MX35_PAD_CTS1__UART1_CTS,
 	MX35_PAD_RTS1__UART1_RTS,
@@ -117,18 +111,18 @@ static const struct mxc_nand_platform_data
 	.flash_bbt	= 1,
 };
 
-static struct mxc_usbh_platform_data __maybe_unused otg_pdata = {
+static const struct mxc_usbh_platform_data otg_pdata __initconst = {
 	.portsc	= MXC_EHCI_MODE_UTMI,
 	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
-static struct mxc_usbh_platform_data __maybe_unused usbh1_pdata = {
+static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
 	.portsc	= MXC_EHCI_MODE_SERIAL,
 	.flags	= MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
 		  MXC_EHCI_IPPUE_DOWN,
 };
 
-static struct fsl_usb2_platform_data otg_device_pdata = {
+static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
 	.operating_mode	= FSL_USB2_DR_DEVICE,
 	.phy_mode	= FSL_USB2_PHY_UTMI,
 	.workaround	= FLS_USB2_WORKAROUND_ENGCM09152,
@@ -158,7 +152,7 @@ static void __init mxc_board_init(void)
 			ARRAY_SIZE(eukrea_cpuimx35_pads));
 
 	imx35_add_fec(NULL);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	imx35_add_imx2_wdt(NULL);
 
 	imx35_add_imx_uart0(&uart_pdata);
 	imx35_add_mxc_nand(&eukrea_cpuimx35_nand_board_info);
@@ -168,11 +162,11 @@ static void __init mxc_board_init(void)
 	imx35_add_imx_i2c0(&eukrea_cpuimx35_i2c0_data);
 
 	if (otg_mode_host)
-		mxc_register_device(&mxc_otg_host, &otg_pdata);
+		imx35_add_mxc_ehci_otg(&otg_pdata);
 	else
-		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+		imx35_add_fsl_usb2_udc(&otg_device_pdata);
 
-	mxc_register_device(&mxc_usbh1, &usbh1_pdata);
+	imx35_add_mxc_ehci_hs(&usbh1_pdata);
 
 #ifdef CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD
 	eukrea_mbimxsd35_baseboard_init();

arch/arm/mach-mx3/mach-kzm_arm11_01.c

@@ -41,9 +41,9 @@
 #include "devices-imx31.h"
 #include "devices.h"
 
-#define KZM_ARM11_IO_ADDRESS(x) (					\
-	IMX_IO_ADDRESS(x, MX31_CS4) ?:					\
-	IMX_IO_ADDRESS(x, MX31_CS5) ?:					\
+#define KZM_ARM11_IO_ADDRESS(x) (IOMEM(					\
+	IMX_IO_P2V_MODULE(x, MX31_CS4) ?:				\
+	IMX_IO_P2V_MODULE(x, MX31_CS5)) ?:				\
 	MX31_IO_ADDRESS(x))
 
 /*

arch/arm/mach-mx3/mach-mx31_3ds.c

@@ -22,8 +22,8 @@
 #include <linux/mfd/mc13783.h>
 #include <linux/spi/spi.h>
 #include <linux/regulator/machine.h>
-#include <linux/fsl_devices.h>
-#include <linux/input/matrix_keypad.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -34,6 +34,7 @@
 #include <mach/common.h>
 #include <mach/iomux-mx3.h>
 #include <mach/3ds_debugboard.h>
+#include <mach/ulpi.h>
 
 #include "devices-imx31.h"
 #include "devices.h"
@@ -84,6 +85,21 @@ static int mx31_3ds_pins[] = {
 	MX31_PIN_KEY_COL1_KEY_COL1,
 	MX31_PIN_KEY_COL2_KEY_COL2,
 	MX31_PIN_KEY_COL3_KEY_COL3,
+	/* USB Host 2 */
+	IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_PC_VS2, IOMUX_CONFIG_ALT1),
+	IOMUX_MODE(MX31_PIN_PC_BVD1, IOMUX_CONFIG_ALT1),
+	IOMUX_MODE(MX31_PIN_PC_BVD2, IOMUX_CONFIG_ALT1),
+	IOMUX_MODE(MX31_PIN_PC_RST, IOMUX_CONFIG_ALT1),
+	IOMUX_MODE(MX31_PIN_IOIS16, IOMUX_CONFIG_ALT1),
+	IOMUX_MODE(MX31_PIN_PC_RW_B, IOMUX_CONFIG_ALT1),
+	/* USB Host2 reset */
+	IOMUX_MODE(MX31_PIN_USB_BYP, IOMUX_CONFIG_GPIO),
 };
 
 /*
@@ -102,7 +118,7 @@ static const uint32_t mx31_3ds_keymap[] = {
 	KEY(2, 3, KEY_F10),
 };
 
-static struct matrix_keymap_data mx31_3ds_keymap_data = {
+static const struct matrix_keymap_data mx31_3ds_keymap_data __initconst = {
 	.keymap		= mx31_3ds_keymap,
 	.keymap_size	= ARRAY_SIZE(mx31_3ds_keymap),
 };
@@ -115,6 +131,13 @@ static struct regulator_init_data pwgtx_init = {
 	},
 };
 
+static struct regulator_init_data gpo_init = {
+	.constraints = {
+		.boot_on = 1,
+		.always_on = 1,
+	}
+};
+
 static struct mc13783_regulator_init_data mx31_3ds_regulators[] = {
 	{
 		.id = MC13783_REGU_PWGT1SPI, /* Power Gate for ARM core. */
@@ -122,6 +145,13 @@ static struct mc13783_regulator_init_data mx31_3ds_regulators[] = {
 	}, {
 		.id = MC13783_REGU_PWGT2SPI, /* Power Gate for L2 Cache. */
 		.init_data = &pwgtx_init,
+	}, {
+
+		.id = MC13783_REGU_GPO1, /* Turn on 1.8V */
+		.init_data = &gpo_init,
+	}, {
+		.id = MC13783_REGU_GPO3, /* Turn on 3.3V */
+		.init_data = &gpo_init,
 	},
 };
 
@@ -129,7 +159,7 @@ static struct mc13783_regulator_init_data mx31_3ds_regulators[] = {
 static struct mc13783_platform_data mc13783_pdata __initdata = {
 	.regulators = mx31_3ds_regulators,
 	.num_regulators = ARRAY_SIZE(mx31_3ds_regulators),
-	.flags  = MC13783_USE_REGULATOR,
+	.flags  = MC13783_USE_REGULATOR | MC13783_USE_TOUCHSCREEN,
 };
 
 /* SPI */
@@ -175,6 +205,7 @@ mx31_3ds_nand_board_info __initconst = {
 		     PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
 
 #define USBOTG_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_PWR)
+#define USBH2_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_BYP)
 
 static int mx31_3ds_usbotg_init(void)
 {
@@ -214,11 +245,77 @@ usbotg_free_reset:
 	return err;
 }
 
-static struct fsl_usb2_platform_data usbotg_pdata = {
+static int mx31_3ds_host2_init(struct platform_device *pdev)
+{
+	int err;
+
+	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_PC_VS2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_PC_BVD1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_PC_BVD2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_PC_RST, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_IOIS16, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_PC_RW_B, USB_PAD_CFG);
+
+	err = gpio_request(USBH2_RST_B, "usbh2-reset");
+	if (err) {
+		pr_err("Failed to request the USB Host 2 reset gpio\n");
+		return err;
+	}
+
+	err = gpio_direction_output(USBH2_RST_B, 0);
+	if (err) {
+		pr_err("Failed to drive the USB Host 2 reset gpio\n");
+		goto usbotg_free_reset;
+	}
+
+	mdelay(1);
+	gpio_set_value(USBH2_RST_B, 1);
+	return 0;
+
+usbotg_free_reset:
+	gpio_free(USBH2_RST_B);
+	return err;
+}
+
+#if defined(CONFIG_USB_ULPI)
+static struct mxc_usbh_platform_data otg_pdata __initdata = {
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
+};
+
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
+	.init = mx31_3ds_host2_init,
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
+};
+#endif
+
+static const struct fsl_usb2_platform_data usbotg_pdata __initconst = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
 	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
 
+static int otg_mode_host;
+
+static int __init mx31_3ds_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", mx31_3ds_otg_mode);
+
 static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
@@ -246,14 +343,27 @@ static void __init mxc_board_init(void)
 	spi_register_board_info(mx31_3ds_spi_devs,
 						ARRAY_SIZE(mx31_3ds_spi_devs));
 
-	mxc_register_device(&imx_kpp_device, &mx31_3ds_keymap_data);
+	imx31_add_imx_keypad(&mx31_3ds_keymap_data);
 
 	mx31_3ds_usbotg_init();
-	mxc_register_device(&mxc_otg_udc_device, &usbotg_pdata);
+#if defined(CONFIG_USB_ULPI)
+	if (otg_mode_host) {
+		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
+
+		imx31_add_mxc_ehci_otg(&otg_pdata);
+	}
+	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
+	imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
+#endif
+	if (!otg_mode_host)
+		imx31_add_fsl_usb2_udc(&usbotg_pdata);
 
 	if (mxc_expio_init(MX31_CS5_BASE_ADDR, EXPIO_PARENT_INT))
 		printk(KERN_WARNING "Init of the debug board failed, all "
 				    "devices on the debug board are unusable.\n");
+	imx31_add_imx2_wdt(NULL);
 }
 
 static void __init mx31_3ds_timer_init(void)

arch/arm/mach-mx3/mach-mx31lilly.c

@@ -42,7 +42,6 @@
 #include <mach/common.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31lilly.h>
-#include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
 #include "devices-imx31.h"
@@ -230,13 +229,13 @@ static struct mxc_usbh_platform_data usbotg_pdata = {
 	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
 };
 
-static struct mxc_usbh_platform_data usbh1_pdata = {
+static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
 	.init	= usbh1_init,
 	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
 	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
 };
 
-static struct mxc_usbh_platform_data usbh2_pdata = {
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
 	.init	= usbh2_init,
 	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
 	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
@@ -249,8 +248,8 @@ static void lilly1131_usb_init(void)
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
-	mxc_register_device(&mxc_usbh1, &usbh1_pdata);
-	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+	imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
+	imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
 }
 
 #else

arch/arm/mach-mx3/mach-mx31lite.c

@@ -40,7 +40,6 @@
 #include <mach/board-mx31lite.h>
 #include <mach/iomux-mx3.h>
 #include <mach/irqs.h>
-#include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
 #include "devices-imx31.h"
@@ -171,7 +170,7 @@ static int usbh2_init(struct platform_device *pdev)
 	return 0;
 }
 
-static struct mxc_usbh_platform_data usbh2_pdata = {
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
 	.init   = usbh2_init,
 	.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
 	.flags  = MXC_EHCI_POWER_PINS_ENABLED,
@@ -258,7 +257,7 @@ static void __init mxc_board_init(void)
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
-	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+	imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
 #endif
 
 	/* SMSC9117 IRQ pin */

arch/arm/mach-mx3/mach-mx31moboard.c

@@ -40,8 +40,6 @@
 #include <mach/hardware.h>
 #include <mach/iomux-mx3.h>
 #include <mach/ipu.h>
-#include <mach/mmc.h>
-#include <mach/mxc_ehci.h>
 #include <mach/mx3_camera.h>
 #include <mach/spi.h>
 #include <mach/ulpi.h>
@@ -170,11 +168,11 @@ static const struct spi_imx_master moboard_spi1_pdata __initconst = {
 
 static struct regulator_consumer_supply sdhc_consumers[] = {
 	{
-		.dev	= &mxcsdhc_device0.dev,
+		.dev_name = "mxc-mmc.0",
 		.supply	= "sdhc0_vcc",
 	},
 	{
-		.dev	= &mxcsdhc_device1.dev,
+		.dev_name = "mxc-mmc.1",
 		.supply	= "sdhc1_vcc",
 	},
 };
@@ -345,7 +343,7 @@ static void moboard_sdhc1_exit(struct device *dev, void *data)
 	gpio_free(SDHC1_CD);
 }
 
-static struct imxmmc_platform_data sdhc1_pdata = {
+static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
 	.get_ro	= moboard_sdhc1_get_ro,
 	.init	= moboard_sdhc1_init,
 	.exit	= moboard_sdhc1_exit,
@@ -404,17 +402,23 @@ static void usb_xcvr_reset(void)
 
 #if defined(CONFIG_USB_ULPI)
 
-static struct mxc_usbh_platform_data usbh2_pdata = {
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
 	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
 	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
 };
 
 static int __init moboard_usbh2_init(void)
 {
+	struct platform_device *pdev;
+
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 			ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
-	return mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+	pdev = imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	return 0;
 }
 #else
 static inline int moboard_usbh2_init(void) { return 0; }
@@ -520,7 +524,7 @@ static void __init mxc_board_init(void)
 	spi_register_board_info(moboard_spi_board_info,
 		ARRAY_SIZE(moboard_spi_board_info));
 
-	mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata);
+	imx31_add_mxc_mmc(0, &sdhc1_pdata);
 
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
 	if (!mx31moboard_cam_alloc_dma(CAMERA_BUF_SIZE))

arch/arm/mach-mx3/mach-mx35_3ds.c

@@ -26,7 +26,7 @@
 #include <linux/platform_device.h>
 #include <linux/memory.h>
 #include <linux/gpio.h>
-#include <linux/fsl_devices.h>
+#include <linux/usb/otg.h>
 
 #include <linux/mtd/physmap.h>
 
@@ -40,7 +40,6 @@
 #include <mach/iomux-mx35.h>
 #include <mach/irqs.h>
 #include <mach/3ds_debugboard.h>
-#include <mach/mxc_ehci.h>
 
 #include "devices-imx35.h"
 #include "devices.h"
@@ -81,7 +80,7 @@ static struct platform_device *devices[] __initdata = {
 	&mx35pdk_flash,
 };
 
-static struct pad_desc mx35pdk_pads[] = {
+static iomux_v3_cfg_t mx35pdk_pads[] = {
 	/* UART1 */
 	MX35_PAD_CTS1__UART1_CTS,
 	MX35_PAD_RTS1__UART1_RTS,
@@ -122,18 +121,38 @@ static struct pad_desc mx35pdk_pads[] = {
 };
 
 /* OTG config */
-static struct fsl_usb2_platform_data usb_otg_pdata = {
+static const struct fsl_usb2_platform_data usb_otg_pdata __initconst = {
 	.operating_mode	= FSL_USB2_DR_DEVICE,
 	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
 };
 
+static struct mxc_usbh_platform_data otg_pdata __initdata = {
+	.portsc	= MXC_EHCI_MODE_UTMI,
+	.flags	= MXC_EHCI_INTERNAL_PHY,
+};
+
 /* USB HOST config */
-static struct mxc_usbh_platform_data usb_host_pdata = {
+static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
 	.portsc		= MXC_EHCI_MODE_SERIAL,
 	.flags		= MXC_EHCI_INTERFACE_SINGLE_UNI |
 			  MXC_EHCI_INTERNAL_PHY,
 };
 
+static int otg_mode_host;
+
+static int __init mx35_3ds_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", mx35_3ds_otg_mode);
+
 /*
  * Board specific initialization.
  */
@@ -142,16 +161,21 @@ static void __init mxc_board_init(void)
 	mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
 
 	imx35_add_fec(NULL);
+	imx35_add_imx2_wdt(NULL);
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	imx35_add_imx_uart0(&uart_pdata);
 
-	mxc_register_device(&mxc_otg_udc_device, &usb_otg_pdata);
+	if (otg_mode_host)
+		imx35_add_mxc_ehci_otg(&otg_pdata);
 
-	mxc_register_device(&mxc_usbh1, &usb_host_pdata);
+	imx35_add_mxc_ehci_hs(&usb_host_pdata);
+
+	if (!otg_mode_host)
+		imx35_add_fsl_usb2_udc(&usb_otg_pdata);
 
 	imx35_add_mxc_nand(&mx35pdk_nand_board_info);
-	imx35_add_esdhc(0, NULL);
+	imx35_add_sdhci_esdhc_imx(0, NULL);
 
 	if (mxc_expio_init(MX35_CS5_BASE_ADDR, EXPIO_PARENT_INT))
 		pr_warn("Init of the debugboard failed, all "

arch/arm/mach-mx3/mach-pcm037.c

@@ -27,7 +27,6 @@
 #include <linux/delay.h>
 #include <linux/spi/spi.h>
 #include <linux/irq.h>
-#include <linux/fsl_devices.h>
 #include <linux/can/platform/sja1000.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
@@ -43,10 +42,8 @@
 #include <mach/hardware.h>
 #include <mach/iomux-mx3.h>
 #include <mach/ipu.h>
-#include <mach/mmc.h>
 #include <mach/mx3_camera.h>
 #include <mach/mx3fb.h>
-#include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
 #include "devices-imx31.h"
@@ -399,7 +396,7 @@ static void pcm970_sdhc1_exit(struct device *dev, void *data)
 	gpio_free(SDHC1_GPIO_WP);
 }
 
-static struct imxmmc_platform_data sdhc_pdata = {
+static const struct imxmmc_platform_data sdhc_pdata __initconst = {
 #ifdef PCM970_SDHC_RW_SWITCH
 	.get_ro = pcm970_sdhc1_get_ro,
 #endif
@@ -441,7 +438,6 @@ static int __init pcm037_camera_alloc_dma(const size_t buf_size)
 static struct platform_device *devices[] __initdata = {
 	&pcm037_flash,
 	&pcm037_sram_device,
-	&imx_wdt_device0,
 	&pcm037_mt9t031,
 	&pcm037_mt9v022,
 };
@@ -538,18 +534,18 @@ static struct platform_device pcm970_sja1000 = {
 };
 
 #if defined(CONFIG_USB_ULPI)
-static struct mxc_usbh_platform_data otg_pdata = {
+static struct mxc_usbh_platform_data otg_pdata __initdata = {
 	.portsc	= MXC_EHCI_MODE_ULPI,
 	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
-static struct mxc_usbh_platform_data usbh2_pdata = {
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
 	.portsc	= MXC_EHCI_MODE_ULPI,
 	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 #endif
 
-static struct fsl_usb2_platform_data otg_device_pdata = {
+static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
 	.phy_mode       = FSL_USB2_PHY_ULPI,
 };
@@ -607,12 +603,13 @@ static void __init mxc_board_init(void)
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
+	imx31_add_imx2_wdt(NULL);
 	imx31_add_imx_uart0(&uart_pdata);
 	/* XXX: should't this have .flags = 0 (i.e. no RTSCTS) on PCM037_EET? */
 	imx31_add_imx_uart1(&uart_pdata);
 	imx31_add_imx_uart2(&uart_pdata);
 
-	mxc_register_device(&mxc_w1_master_device, NULL);
+	imx31_add_mxc_w1(NULL);
 
 	/* LAN9217 IRQ pin */
 	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq");
@@ -632,7 +629,7 @@ static void __init mxc_board_init(void)
 	imx31_add_imx_i2c2(&pcm037_i2c2_data);
 
 	imx31_add_mxc_nand(&pcm037_nand_board_info);
-	mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
+	imx31_add_mxc_mmc(0, &sdhc_pdata);
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
 	mxc_register_device(&mx3_fb, &mx3fb_pdata);
 
@@ -654,16 +651,16 @@ static void __init mxc_board_init(void)
 		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
-		mxc_register_device(&mxc_otg_host, &otg_pdata);
+		imx31_add_mxc_ehci_otg(&otg_pdata);
 	}
 
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
-	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+	imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
 #endif
 	if (!otg_mode_host)
-		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+		imx31_add_fsl_usb2_udc(&otg_device_pdata);
 
 }
 

arch/arm/mach-mx3/mach-pcm043.c

@@ -27,7 +27,6 @@
 #include <linux/i2c/at24.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
-#include <linux/fsl_devices.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -39,7 +38,6 @@
 #include <mach/iomux-mx35.h>
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
-#include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 #include <mach/audmux.h>
 
@@ -140,10 +138,9 @@ static struct i2c_board_info pcm043_i2c_devices[] = {
 
 static struct platform_device *devices[] __initdata = {
 	&pcm043_flash,
-	&imx_wdt_device0,
 };
 
-static struct pad_desc pcm043_pads[] = {
+static iomux_v3_cfg_t pcm043_pads[] = {
 	/* UART1 */
 	MX35_PAD_CTS1__UART1_CTS,
 	MX35_PAD_RTS1__UART1_RTS,
@@ -230,8 +227,8 @@ static struct pad_desc pcm043_pads[] = {
 
 static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
 {
-	struct pad_desc txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
-	struct pad_desc txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
+	iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
+	iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
 	int ret;
 
 	ret = gpio_request(AC97_GPIO_TXFS, "SSI");
@@ -240,7 +237,7 @@ static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
 		return;
 	}
 
-	mxc_iomux_v3_setup_pad(&txfs_gpio);
+	mxc_iomux_v3_setup_pad(txfs_gpio);
 
 	/* warm reset */
 	gpio_direction_output(AC97_GPIO_TXFS, 1);
@@ -248,16 +245,16 @@ static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
 	gpio_set_value(AC97_GPIO_TXFS, 0);
 
 	gpio_free(AC97_GPIO_TXFS);
-	mxc_iomux_v3_setup_pad(&txfs);
+	mxc_iomux_v3_setup_pad(txfs);
 }
 
 static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97)
 {
-	struct pad_desc txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
-	struct pad_desc txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
-	struct pad_desc txd_gpio = MX35_PAD_STXD4__GPIO2_28;
-	struct pad_desc txd = MX35_PAD_STXD4__AUDMUX_AUD4_TXD;
-	struct pad_desc reset_gpio = MX35_PAD_SD2_CMD__GPIO2_0;
+	iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
+	iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
+	iomux_v3_cfg_t txd_gpio = MX35_PAD_STXD4__GPIO2_28;
+	iomux_v3_cfg_t txd = MX35_PAD_STXD4__AUDMUX_AUD4_TXD;
+	iomux_v3_cfg_t reset_gpio = MX35_PAD_SD2_CMD__GPIO2_0;
 	int ret;
 
 	ret = gpio_request(AC97_GPIO_TXFS, "SSI");
@@ -272,9 +269,9 @@ static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97)
 	if (ret)
 		goto err3;
 
-	mxc_iomux_v3_setup_pad(&txfs_gpio);
-	mxc_iomux_v3_setup_pad(&txd_gpio);
-	mxc_iomux_v3_setup_pad(&reset_gpio);
+	mxc_iomux_v3_setup_pad(txfs_gpio);
+	mxc_iomux_v3_setup_pad(txd_gpio);
+	mxc_iomux_v3_setup_pad(reset_gpio);
 
 	gpio_direction_output(AC97_GPIO_TXFS, 0);
 	gpio_direction_output(AC97_GPIO_TXD, 0);
@@ -284,8 +281,8 @@ static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97)
 	udelay(10);
 	gpio_direction_output(AC97_GPIO_RESET, 1);
 
-	mxc_iomux_v3_setup_pad(&txd);
-	mxc_iomux_v3_setup_pad(&txfs);
+	mxc_iomux_v3_setup_pad(txd);
+	mxc_iomux_v3_setup_pad(txfs);
 
 	gpio_free(AC97_GPIO_RESET);
 err3:
@@ -311,19 +308,19 @@ pcm037_nand_board_info __initconst = {
 };
 
 #if defined(CONFIG_USB_ULPI)
-static struct mxc_usbh_platform_data otg_pdata = {
+static struct mxc_usbh_platform_data otg_pdata __initdata = {
 	.portsc	= MXC_EHCI_MODE_UTMI,
 	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
-static struct mxc_usbh_platform_data usbh1_pdata = {
+static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
 	.portsc	= MXC_EHCI_MODE_SERIAL,
 	.flags	= MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
 		  MXC_EHCI_IPPUE_DOWN,
 };
 #endif
 
-static struct fsl_usb2_platform_data otg_device_pdata = {
+static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
 	.phy_mode       = FSL_USB2_PHY_UTMI,
 };
@@ -364,6 +361,7 @@ static void __init mxc_board_init(void)
 
 	imx35_add_fec(NULL);
 	platform_add_devices(devices, ARRAY_SIZE(devices));
+	imx35_add_imx2_wdt(NULL);
 
 	imx35_add_imx_uart0(&uart_pdata);
 	imx35_add_mxc_nand(&pcm037_nand_board_info);
@@ -386,16 +384,16 @@ static void __init mxc_board_init(void)
 		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
-		mxc_register_device(&mxc_otg_host, &otg_pdata);
+		imx35_add_mxc_ehci_otg(&otg_pdata);
 	}
 
-	mxc_register_device(&mxc_usbh1, &usbh1_pdata);
+	imx35_add_mxc_ehci_hs(&usbh1_pdata);
 #endif
 	if (!otg_mode_host)
-		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+		imx35_add_fsl_usb2_udc(&otg_device_pdata);
 
 	imx35_add_flexcan1(NULL);
-	imx35_add_esdhc(0, NULL);
+	imx35_add_sdhci_esdhc_imx(0, NULL);
 }
 
 static void __init pcm043_timer_init(void)

arch/arm/mach-mx3/mm.c

@@ -36,40 +36,16 @@
  * @ingroup Memory
  */
 
-/*!
- * This table defines static virtual address mappings for I/O regions.
- * These are the mappings common across all MX3 boards.
- */
-static struct map_desc mxc_io_desc[] __initdata = {
-	{
-		.virtual	= X_MEMC_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(X_MEMC_BASE_ADDR),
-		.length		= X_MEMC_SIZE,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= AVIC_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(AVIC_BASE_ADDR),
-		.length		= AVIC_SIZE,
-		.type		= MT_DEVICE_NONSHARED
-	}, {
-		.virtual	= AIPS1_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(AIPS1_BASE_ADDR),
-		.length		= AIPS1_SIZE,
-		.type		= MT_DEVICE_NONSHARED
-	}, {
-		.virtual	= AIPS2_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(AIPS2_BASE_ADDR),
-		.length		= AIPS2_SIZE,
-		.type		= MT_DEVICE_NONSHARED
-	}, {
-		.virtual = SPBA0_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
-		.length = SPBA0_SIZE,
-		.type = MT_DEVICE_NONSHARED
-	},
+#ifdef CONFIG_SOC_IMX31
+static struct map_desc mx31_io_desc[] __initdata = {
+	imx_map_entry(MX31, X_MEMC, MT_DEVICE),
+	imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX31, AIPS1, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX31, AIPS2, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX31, SPBA0, MT_DEVICE_NONSHARED),
 };
 
-/*!
+/*
  * This function initializes the memory map. It is called during the
  * system startup to create static physical to virtual memory mappings
  * for the IO modules.
@@ -77,34 +53,44 @@ static struct map_desc mxc_io_desc[] __initdata = {
 void __init mx31_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX31);
-	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
+	mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
 
-	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+	iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
 }
 
-#ifdef CONFIG_ARCH_MX35
+int imx31_register_gpios(void);
+void __init mx31_init_irq(void)
+{
+	mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
+	imx31_register_gpios();
+}
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+#ifdef CONFIG_SOC_IMX35
+static struct map_desc mx35_io_desc[] __initdata = {
+	imx_map_entry(MX35, X_MEMC, MT_DEVICE),
+	imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
+};
+
 void __init mx35_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX35);
-	mxc_iomux_v3_init(IO_ADDRESS(IOMUXC_BASE_ADDR));
-	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
+	mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
+	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
 
-	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
-}
-#endif
-
-int imx3x_register_gpios(void);
-
-void __init mx31_init_irq(void)
-{
-	mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
-	imx3x_register_gpios();
+	iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
 }
 
+int imx35_register_gpios(void);
 void __init mx35_init_irq(void)
 {
-	mx31_init_irq();
+	mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
+	imx35_register_gpios();
 }
+#endif /* ifdef CONFIG_SOC_IMX35 */
 
 #ifdef CONFIG_CACHE_L2X0
 static int mxc_init_l2x0(void)
@@ -129,7 +115,7 @@ static int mxc_init_l2x0(void)
 		pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
 	}
 
-	l2x0_base = ioremap(L2CC_BASE_ADDR, 4096);
+	l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
 	if (IS_ERR(l2x0_base)) {
 		printk(KERN_ERR "remapping L2 cache area failed with %ld\n",
 				PTR_ERR(l2x0_base));

arch/arm/mach-mx3/mx31lilly-db.c

@@ -34,7 +34,6 @@
 #include <mach/common.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31lilly.h>
-#include <mach/mmc.h>
 #include <mach/mx3fb.h>
 #include <mach/ipu.h>
 
@@ -158,7 +157,7 @@ static void mxc_mmc1_exit(struct device *dev, void *data)
 	free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data);
 }
 
-static struct imxmmc_platform_data mmc_pdata = {
+static const struct imxmmc_platform_data mmc_pdata __initconst = {
 	.get_ro	= mxc_mmc1_get_ro,
 	.init	= mxc_mmc1_init,
 	.exit	= mxc_mmc1_exit,
@@ -216,7 +215,7 @@ void __init mx31lilly_db_init(void)
 	imx31_add_imx_uart0(&uart_pdata);
 	imx31_add_imx_uart1(&uart_pdata);
 	imx31_add_imx_uart2(&uart_pdata);
-	mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
+	imx31_add_mxc_mmc(0, &mmc_pdata);
 	mx31lilly_init_fb();
 }
 

arch/arm/mach-mx3/mx31lite-db.c

@@ -35,7 +35,6 @@
 #include <mach/common.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31lite.h>
-#include <mach/mmc.h>
 
 #include "devices-imx31.h"
 #include "devices.h"
@@ -142,7 +141,7 @@ static void mxc_mmc1_exit(struct device *dev, void *data)
 	free_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), data);
 }
 
-static struct imxmmc_platform_data mmc_pdata = {
+static const struct imxmmc_platform_data mmc_pdata __initconst = {
 	.get_ro	 = mxc_mmc1_get_ro,
 	.init	   = mxc_mmc1_init,
 	.exit	   = mxc_mmc1_exit,
@@ -197,10 +196,9 @@ void __init mx31lite_db_init(void)
 					ARRAY_SIZE(litekit_db_board_pins),
 					"development board pins");
 	imx31_add_imx_uart0(&uart_pdata);
-	mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
+	imx31_add_mxc_mmc(0, &mmc_pdata);
 	imx31_add_spi_imx0(&spi0_pdata);
 	platform_device_register(&litekit_led_device);
-	mxc_register_device(&imx_wdt_device0, NULL);
+	imx31_add_imx2_wdt(NULL);
 	mxc_register_device(&imx_rtc_device0, NULL);
 }
-

arch/arm/mach-mx3/mx31moboard-devboard.c

@@ -18,15 +18,12 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/types.h>
-#include <linux/fsl_devices.h>
 
 #include <linux/usb/otg.h>
 
 #include <mach/common.h>
 #include <mach/iomux-mx3.h>
 #include <mach/hardware.h>
-#include <mach/mmc.h>
-#include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
 #include "devices-imx31.h"
@@ -103,7 +100,7 @@ static void devboard_sdhc2_exit(struct device *dev, void *data)
 	gpio_free(SDHC2_CD);
 }
 
-static struct imxmmc_platform_data sdhc2_pdata = {
+static const struct imxmmc_platform_data sdhc2_pdata __initconst = {
 	.get_ro	= devboard_sdhc2_get_ro,
 	.init	= devboard_sdhc2_init,
 	.exit	= devboard_sdhc2_exit,
@@ -187,7 +184,7 @@ static int devboard_isp1105_set_vbus(struct otg_transceiver *otg, bool on)
 	return 0;
 }
 
-static struct mxc_usbh_platform_data usbh1_pdata = {
+static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
 	.init	= devboard_usbh1_hw_init,
 	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
 	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
@@ -196,6 +193,7 @@ static struct mxc_usbh_platform_data usbh1_pdata = {
 static int __init devboard_usbh1_init(void)
 {
 	struct otg_transceiver *otg;
+	struct platform_device *pdev;
 
 	otg = kzalloc(sizeof(*otg), GFP_KERNEL);
 	if (!otg)
@@ -207,11 +205,15 @@ static int __init devboard_usbh1_init(void)
 
 	usbh1_pdata.otg = otg;
 
-	return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
+	pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	return 0;
 }
 
 
-static struct fsl_usb2_platform_data usb_pdata = {
+static const struct fsl_usb2_platform_data usb_pdata __initconst = {
 	.operating_mode	= FSL_USB2_DR_DEVICE,
 	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
@@ -228,11 +230,11 @@ void __init mx31moboard_devboard_init(void)
 
 	imx31_add_imx_uart1(&uart_pdata);
 
-	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+	imx31_add_mxc_mmc(1, &sdhc2_pdata);
 
 	devboard_init_sel_gpios();
 
-	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+	imx31_add_fsl_usb2_udc(&usb_pdata);
 
 	devboard_usbh1_init();
 }

arch/arm/mach-mx3/mx31moboard-marxbot.c

@@ -21,7 +21,6 @@
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/types.h>
-#include <linux/fsl_devices.h>
 
 #include <linux/usb/otg.h>
 
@@ -29,12 +28,11 @@
 #include <mach/hardware.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
-#include <mach/mmc.h>
-#include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
 #include <media/soc_camera.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 
 static unsigned int marxbot_pins[] = {
@@ -116,7 +114,7 @@ static void marxbot_sdhc2_exit(struct device *dev, void *data)
 	gpio_free(SDHC2_CD);
 }
 
-static struct imxmmc_platform_data sdhc2_pdata = {
+static const struct imxmmc_platform_data sdhc2_pdata __initconst = {
 	.get_ro	= marxbot_sdhc2_get_ro,
 	.init	= marxbot_sdhc2_init,
 	.exit	= marxbot_sdhc2_exit,
@@ -302,7 +300,7 @@ static int marxbot_isp1105_set_vbus(struct otg_transceiver *otg, bool on)
 	return 0;
 }
 
-static struct mxc_usbh_platform_data usbh1_pdata = {
+static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
 	.init	= marxbot_usbh1_hw_init,
 	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
 	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
@@ -311,6 +309,7 @@ static struct mxc_usbh_platform_data usbh1_pdata = {
 static int __init marxbot_usbh1_init(void)
 {
 	struct otg_transceiver *otg;
+	struct platform_device *pdev;
 
 	otg = kzalloc(sizeof(*otg), GFP_KERNEL);
 	if (!otg)
@@ -322,10 +321,14 @@ static int __init marxbot_usbh1_init(void)
 
 	usbh1_pdata.otg = otg;
 
-	return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
+	pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	return 0;
 }
 
-static struct fsl_usb2_platform_data usb_pdata = {
+static const struct fsl_usb2_platform_data usb_pdata __initconst = {
 	.operating_mode	= FSL_USB2_DR_DEVICE,
 	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
@@ -344,7 +347,7 @@ void __init mx31moboard_marxbot_init(void)
 
 	dspics_resets_init();
 
-	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+	imx31_add_mxc_mmc(1, &sdhc2_pdata);
 
 	spi_register_board_info(marxbot_spi_board_info,
 		ARRAY_SIZE(marxbot_spi_board_info));
@@ -357,7 +360,7 @@ void __init mx31moboard_marxbot_init(void)
 	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_LCS0));
 	gpio_export(IOMUX_TO_GPIO(MX31_PIN_LCS0), false);
 
-	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+	imx31_add_fsl_usb2_udc(&usb_pdata);
 
 	marxbot_usbh1_init();
 }

arch/arm/mach-mx3/mx31moboard-smartbot.c

@@ -19,7 +19,6 @@
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
 #include <linux/types.h>
-#include <linux/fsl_devices.h>
 
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
@@ -28,7 +27,6 @@
 #include <mach/hardware.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31moboard.h>
-#include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
 #include <media/soc_camera.h>
@@ -118,24 +116,30 @@ static int __init smartbot_cam_init(void)
 	return 0;
 }
 
-static struct fsl_usb2_platform_data usb_pdata = {
+static const struct fsl_usb2_platform_data usb_pdata __initconst = {
 	.operating_mode	= FSL_USB2_DR_DEVICE,
 	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
 
 #if defined(CONFIG_USB_ULPI)
 
-static struct mxc_usbh_platform_data otg_host_pdata = {
+static struct mxc_usbh_platform_data otg_host_pdata __initdata = {
 	.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
 	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
 };
 
 static int __init smartbot_otg_host_init(void)
 {
+	struct platform_device *pdev;
+
 	otg_host_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 			ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
-	return mxc_register_device(&mxc_otg_host, &otg_host_pdata);
+	pdev = imx31_add_mxc_ehci_otg(&otg_host_pdata);
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	return 0;
 }
 #else
 static inline int smartbot_otg_host_init(void) { return 0; }
@@ -182,7 +186,7 @@ void __init mx31moboard_smartbot_init(int board)
 
 	switch (board) {
 	case MX31SMARTBOT:
-		mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+		imx31_add_fsl_usb2_udc(&usb_pdata);
 		break;
 	case MX31EYEBOT:
 		smartbot_otg_host_init();